** This position is not eligible for visa sponsorship for external candidates. Candidates cannot require sponsorship now or in the future**

Job’s mission

Our Global Sales, Services & Spares IQ and Sustaining teams are seeking Snr Engineers I & II, Field Service (level will depend on experience, degree and responsibilities. Please review below) to join ASM at a customer site (TSMC) in North Valley, AZ. Domestic and International travel of at least 75% will be required for this role. As a Senior Field Service Engineer at ASM, you’ll play a critical role in supporting the advanced semiconductor equipment that powers the world’s most transformative technologies. You’ll take the lead on complex troubleshooting, guide and mentor engineers, and strengthen our partnerships by helping customers achieve stable, high‑performance fabrication environments. Your expertise will make a direct impact on tool reliability, customer satisfaction, and the next generation of ASM technology.

What you will be working on

Senior Engineer I, Field Service

• Install, maintain, and repair ASM semiconductor equipment with minimal supervision
  • Lead troubleshooting of complex tool or process issues using structured diagnostic methods
  • Perform root‑cause analysis and recommend targeted, data‑driven corrective actions
  • Review tool‑performance data to identify trends, risks, or improvement opportunities
  • Provide technical guidance and on‑the‑job coaching to less‑experienced engineers
  • Document service activities and support updates to procedures and best practices
  • Communicate solutions, progress, and expectations clearly with customer engineers
  • Participate in escalations alongside cross‑functional ASM engineering teams

Senior Engineer II, Field Service

• Serve as the senior technical lead for equipment installation, performance optimization, and recovery
• Diagnose and resolve highly complex, multi‑factor tool and process issues with limited guidance
• Lead advanced root‑cause analysis and drive long‑term corrective‑action plans that influence global engineering improvements
•  Own the customer‑technical relationship: build trust, anticipate operational needs, and act as ASM’s senior technical representative onsite
• Manage escalations end‑to‑end, aligning expectations, coordinating cross‑functional teams, and communicating clear action plans
• Guide, mentor, and develop engineers through hands‑on instruction, structured training, and knowledge‑sharing
• Champion best practices and contribute to procedure development, improvements, and field‑wide learning
•  Provide detailed field insights to R&D, product, and design teams, including support for beta tools or early‑option deployments

What we are looking for

Senior Engineer I, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 6+ years of experience, OR a Master’s degree with 4+ years of experience OR PhD degree with 0+ years of experience.
• Experience of semiconductor field service or capital‑equipment experience
• Ability to interpret electronic and electromechanical schematics
•  Experience with structured troubleshooting methodologies
• Knowledge of cleanroom and semiconductor safety protocols
• Strong written and verbal communication skills
• Ability to work independently and collaboratively in fast‑paced fab environments
• Willingness to travel domestically and internationally as needed for the role. 
• Proficiency in MS Office

Senior Engineer II, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 8+ years of experience, OR a Master’s degree with 6+ years of experience OR PhD degree with 4+ years of experience.
• Experience in semiconductor field service experience with demonstrated technical leadership
• Advanced knowledge of tool architecture, control algorithms, and multi‑factor troubleshooting
• Experience driving structured root‑cause analysis and long‑term corrective‑action plans
• Proven ability to lead escalations and manage customer‑technical relationships
• Strong communication and mentorship capabilities
• Ability to work autonomously while guiding and developing other engineers
• Willingness to travel domestically and internationally as needed for the role
• Proficiency in MS Office

What sets you apart

Senior Engineer I, Field Service

• Experience supporting beta tools or early‑option equipment
• Knowledge of wafer‑fab operations, robotics, vacuum systems, plasma, RF, or gas handling
• Experience writing or updating procedures or technical documentation
• Strong customer‑service approach and organizational skills
• Familiarity with structured problem‑solving methods

Senior Engineer II, Field Service

• Demonstrated leadership in complex troubleshooting programs or technical initiatives
• Experience owning customer‑technical relationships, including expectations and long‑term partnership building
• Strong capability in mentoring and developing field engineers
• Hands‑on expertise with fab robotics, vacuum systems, plasma, RF, or gas‑delivery systems
• Experience providing structured feedback to engineering or product teams
• Experience evaluating or supporting beta‑stage or early‑option tools

** This position is not eligible for visa sponsorship for external candidates. Candidates cannot require sponsorship now or in the future**

As a Field Service Engineer – Early Career, you’ll take on a hands-on role supporting ASM’s advanced semiconductor equipment and helping our customers keep their fabs running at peak performance. You’ll build real-world expertise through structured training, mentorship, and on-the-job learning while working directly with technologies that power AI, 5G, cloud computing, and next‑generation devices. This is your chance to apply your engineering background, strengthen your technical capabilities, and join a team that’s shaping the future of semiconductor innovation.

In this role, based in North-Valley/Phoenix, AZ at our customer site, you’ll launch your engineering career at the center of cutting‑edge semiconductor manufacturing. It’s an ideal opportunity for early‑career engineers who want to put their education into practice in a high‑tech environment where every day brings something new to learn.

From your first day, you’ll receive training through hands‑on guidance from seasoned engineers onsite. You’ll work with vacuum systems, plasma, chemical delivery, robotics, sensors, advanced metrology, and complex hardware‑software interactions. Your contributions will have a direct impact on tool performance, system uptime, and customer success—playing a meaningful role in enabling leading‑edge logic technology nodes. This experience lays a strong foundation for rapid growth, technical mastery, and a variety of long‑term career paths within ASM.

Shifts available:

Mon-Fri- 8am-5pm (subjected to OT)

What You Will Be Working On 

• Support installation, maintenance, and repair of ASM semiconductor equipment at customer sites 
• Troubleshoot equipment and process issues with guidance from senior engineers 
• Deliver clear, timely, customer‑focused support with a strong safety mindset 
• Working in cleanroom environments while following strict safety and quality standards.
• Assist in identifying and contributing to continuous improvement efforts  
• Participate in customer escalations alongside experienced team members 

What We Are Looking For 

• Bachelor’s or master’s degree in Electromechanical Engineering, Electrical Engineering, Mechanical Engineering, or related field 
• Candidates who are hands-on and mechanically curious, energized by complex systems and real-world problem solving, Comfortable working in fast paced, hightech environments & motivated to build a long-term engineering career. 
• Internship, co‑op, senior design project, lab research, or hands‑on technical experience 
• Ability to read and interpret basic electronic and electromechanical schematics 
• Understanding of safety protocols and willingness to work in cleanroom environments 
• Strong problem‑solving mindset and eagerness to learn 
• Clear communication skills and a strong customer-service mindset 
• Ability to work independently and collaboratively 
• Willingness to travel domestically and internationally 
• Proficiency with Microsoft Office 

What Sets You Apart 

• Demonstrated commitment to safety, quality, and disciplined execution 
• Exposure to semiconductor processes, wafer fabs, robotics, vacuum systems, plasma, or gas handling 
• Experience writing technical documentation in school or project settings 
• Familiarity with customer‑facing or support roles (internships, tutoring, help desk, teamwork) 
• Interest in structured problem‑solving methods, statistical methods, data analysis. 
• Curiosity and learning orientation when working with advanced semiconductor technologies 
• Participation in engineering clubs, competitions, or technical student groups 

Why join ASM? 

2026 is the year to join ASM as a Field Service Engineer. Apply now! 

We are actively seeking driven Project Engineers to contribute to the construction of the most innovative and challenging projects across the Southwest. This includes pivotal roles in commercial, industrial, mission-critical, semiconductor, and data center projects. If you're passionate about making a significant impact and thrive in dynamic environments, we invite you to join our team. Together, we will push boundaries and set new standards in construction excellence.

Responsibilities  

• Coordinates directly with the Project Manager and Project Superintendent to support project success, including fostering a positive safety and quality culture 
• Mentors and develop Field Engineers 
• Champions cost management, forecasting and control, including issuance of purchase orders, subcontract agreements, change orders, etc. 
• Champions the procurement of all materials and equipment associated within their assigned scope, including all submittals, and ensures compliance with the project requirements 
• Champions the procurement schedule and participates in overall project schedule development and forecasting 
• Assists the Project Manager with resolving commercial matters with owners, subcontractors and suppliers, as well as pricing owner change orders 
• Ensures the Field Engineer possesses the most current project documents, including drawings, specifications, submittals, requests for information (RFIs), etc. 
• Champions construction permit applications and renewals, as required by the project 
• Actively participates in daily and weekly project meetings 
• Generates weekly production reports and champions weekly productivity meetings 
• Reviews and processes subcontractor and supplier invoices 
• Generates monthly project progress reports for the Project Manager’s review 
• Assists the Project Manager with assembling monthly owner payment applications 
• Develops and preserves a positive business relationship with owners, clients, engineers and trade partners while ensuring contractual compliance with all parties 

Qualifications 

• Ability to assume responsibility, interface and effectively communicate with others 
• Proficiency with Microsoft Office Suite (Outlook, Word, Excel, PowerPoint, etc.) 
• Positive and teachable attitude 
• Possesses excellent organizational, verbal, written and presentation skills 
• Experience leading field-level staff and successfully achieving project goals 

Education/Certifications 

• Bachelor’s Degree in Construction Management or Engineering and a minimum of two (2) years of relative construction experience as a Field Engineer, Field Superintendent or similar 
• Extensive relative construction experience will be considered in lieu of formal education     

Safety Level
This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

• The inherent responsibilities of your role may include physical working conditions. In order to safely and successfully perform job duties you must be able to:  
• Potentially lift up to 50 pounds 
• Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing  
• Potentially operate a motor vehicle, crane, tractor, etc.  
• We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance to the Americans with Disability Act (ADA)

We are thrilled to announce an opportunity for a Field Superintendent to join our team and support the construction of some of the most challenging and exciting projects in the Southwest. This includes innovative and impactful work in commercial, industrial, mission-critical, and water/wastewater treatment facilities. If you are passionate about leading dynamic teams and driving excellence in construction, we want to hear from you!

Responsibilities 

• Emphasizes a culture of exceptional safety and best-in-class quality to all foremen and craft, including associated trade partners. 
• Responsible for supporting and developing Foremen, including fostering a positive environment for our craft and trade partners to prosper. 
• Provides guidance and support to the Field Engineer regarding survey and layout needs, including providing a schedule as to when such work is required. 
• Assists the Project Superintendent with project schedule development and maintenance, including pull plans, look-ahead schedules, and implementation of the Last Planner System 
• Prepares work plans for critical work and facilitates detailed reviews of such plans with the Field Engineer and Foreman 
• Understands budgeted values for labor, equipment, and consumables; responsible for collaboratively planning work with the Foremen to be commercially successful. 
• Responsible for ensuring efficient crew sizing and makeup is always present and adjusting when necessary. 
• Ensures Foremen are promptly and accurately completing all necessary reports and documentation for their crews (timesheets, daily reports, safety/quality forms, employee evals etc.) 
• Leads coordination and Support for all QC processes for their specific scope or assigned project. 
• Actively participates in daily and weekly project meetings. 
• Promptly reports field issues to the Field Engineer and Project Superintendent 
• Assists this Field Engineer with the development of lift drawings. 
• Develops rapport with owners, clients, engineers, and trade partners while ensuring contractual compliance with all parties. 

#CORBIND1

• Planning and safe execution of Hazardous energy control, T&E, Working at Heights, and confined space. 

Qualifications   

• Working knowledge of all aspects of construction and industry practices, processes, standards, and their impact on project activities 
• Ability to multi-task, collaborate with others, set priorities, and take initiative. 
• Demonstrated success supporting a team through complex project execution. 
• Experience leading project teams and holding them accountable to project goals. 
• Excellent organizational, verbal, written, presentation skills are a must. 
• Proficiency with Microsoft Office Suite (Outlook, Word, Excel, PowerPoint, etc.) 
• STSC trained. 
• Proficiency with Primavera P6 scheduling software a huge plus. 
• Positive and teachable attitude. 
• Possesses excellent organizational, verbal, written and presentation skills. 

Education & Certifications 

• OSHA 30 Certification 

Safety Level
This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

• The inherent responsibilities of your role may include physical working conditions. In order to safely and successfully perform job duties you must be able to:  
• Potentially lift up to 50 pounds 
• Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing  
• Potentially operate a motor vehicle, crane, tractor, etc.  
• We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance to the Americans with Disability Act (ADA)

We are seeking an experienced QA/QC Program Manager to lead quality assurance and quality control operations supporting semiconductor facility construction, commissioning, and qualification projects. This role is responsible for developing and implementing comprehensive QA/QC programs, managing a team of inspectors, and ensuring all process mechanical installations meet rigorous industry and project-specific quality standards. The ideal candidate brings deep expertise in semiconductor utility systems, a collaborative leadership style, a safety mindset, and a commitment to building strong relationships with their team and project stakeholders.

Responsibilities:

QA/QC Program Development & Oversight

• Develop, implement, and continuously improve project-specific QA/QC plans, policies, procedures, and inspection checklists aligned with owner specifications and industry standards.
• Establish quality benchmarks, acceptance criteria, and performance metrics for all construction and commissioning activities.
• Manage document control processes for quality records including inspection reports, non-conformance reports (NCRs), corrective action requests (CARs), and recorded issues.
• Lead root cause analysis investigations and drive corrective and preventive action (CAPA) implementation.
• Conduct regular program audits to verify compliance with project quality requirements and regulatory standards.

Team Leadership & People Development

• Recruit, onboard, mentor, and manage a team of QA/QC inspectors across multiple project sites.
• Establish clear expectations, provide regular performance feedback, and create professional development plans for each team member.
• Foster a culture of accountability, continuous learning, continuous improvement and open communication within the QA/QC team.
• Maintain consistent and meaningful contact with employees through regular one-on-ones, team meetings, and site visits.
• Advocate for team resources, training, and career growth opportunities with senior leadership.

Process Mechanical Quality Assurance

• Oversee QA/QC activities for process mechanical installations including piping, welding, pressure testing, and system integration.
• Ensure compliance with applicable codes, standards, and specifications (ASME, SEMI, AWS, and project-specific requirements).
• Review and approve Inspection and Test Plans (ITPs), project quality related specifications, welding procedure specifications (WPS), and procedure qualification records (PQR).

System Qualification & Commissioning Support

• Provide quality oversight during qualification and commissioning of the following semiconductor facility systems:
• Bulk Gas Systems — piping purity testing & qualification, compliance, and system certification.
• Specialty (Spec) Gas Systems — piping purity testing & qualification, compliance, and system certification.
• Process Waste Systems — chemical drain, exhaust, and waste treatment system verification.
• Mechanical Piping — utility piping installation quality and testing.
• Analytical Testing — development of associated quality programs, oversight of purity qualification testing.
• Coordinate reviews of turnover documentation for system handoff.

Stakeholder Coordination & Communication

• Serve as the primary quality point of contact for associated system owners.
• Participate in project planning meetings, schedule reviews, and progress reporting to ensure quality milestones are tracked and met.
• Build and maintain strong working relationships with all project stakeholders through proactive, transparent communication.

• Any other duties or responsibilities that may be assigned to you in your role. 

Skills Required:

• Minimum of 8–10 years of progressive QA/QC experience in semiconductor, pharmaceutical, or high-purity industrial construction environments.
• Proven track record of developing and implementing QA/QC plans, policies, and procedures from program inception through project closeout.
• Demonstrated experience managing, coaching, and developing a team of QA/QC inspectors across multiple concurrent projects or sites.
• Strong working knowledge of process mechanical installations and associated quality specifications, codes, and standards.
• Direct experience with qualification and commissioning of bulk gas, specialty gas, process waste, mechanical piping, Ultra Pure Water and analytical testing systems in semiconductor facilities.
• Proficiency in quality management software, document control systems, and Microsoft Office Suite.

Preferred:

• Working knowledge of SEMI standards, ASME B31.3, and AWS D18.1/D18.2.
• Experience with semiconductor facility construction for leading chip manufacturers (e.g., Intel, TSMC, Samsung, Micron).
• Familiarity with commissioning management platforms and digital quality tools.

Education / Licenses / Certifications:

• Bachelor’s degree in Engineering, Construction Management, Quality Management, or a related field
• Professional certifications such as ASQ Certified Quality Manager (CQM), Certified Quality Engineer (CQE), or equivalent.
• OSHA 30-Hour Construction Safety certification.
• Proof of education, licenses, and certifications will be required where applicable

Benefits:

• Medical, Dental and Vision Insurance 
• Life, Short-Term, Long-Term Disability Insurance 
• Training and Education Assistance 
• 401k Retirement Plan 
• Extra Annual Leave with Years of Service 
• Maternity/Paternity Leave 
• Recognition Rewards
  
  #LI-DNP
  
  

About the Opportunity

As a Full Stack Engineer on our growing EV team, you will be responsible for developing our backend services while maintaining a high security posture within our growing infrastructure. Working directly with other engineers, you will develop new services/products that EnergyHub is building in the connected EV space, engaging drivers and OEMs on new initiatives that help the proliferation of EVs worldwide.

This role is a full-stack role, giving candidates the opportunity to build services, APIs, and front-end user interfaces for drivers and clients to interact with.

Main Responsibilities: What you’ll do

• Develop and maintain the backend services of our EV platform, ensuring that all components work together seamlessly.
• Integrate with third-party APIs to implement external services into our platform, enhancing OEM partners and other external solutions.
• Manage ingestion and storage of multivariate data sets that can scale to millions of users/connected vehicles.
• Build and enhance data lakes to provide additional data analysis for different services and consumers.
• Develop services to interact with connected vehicles at scale.
• Develop and maintain front end “web apps” to provide UIs for our various different products and services.
• Ensure proper security and data protection policies, procedures, and monitoring are in place.
• Design, develop, and maintain third-party accessible APIs for data ingest/egress within the platform.
• Write and maintain technical documentation.
• Drive and embody the “Dev Owns Quality” culture.
• Other duties as assigned

Required Skills and Experience: What you need

• 3+ years professional software engineering experience, preferably in a small to medium-sized team, with a proven exceptional ability as a FullStack engineer or similar role.
• Strong comfortability with Kotlin/Java and familiarity with web services and RESTful APIs using Spring.
• Expertise in API ingestion and data normalization processes.
• Experience with front end languages, such as React/Typescript.
• Experience with containerized systems.
• Knowledge of modern security best practices, authentication/authorization frameworks, and system/API hardening.

Preferred Skills and Experience: Nice-to-haves

• Experience with AWS or other cloud providers.
• Experience with GraphQL.
• Typical development tools and processes (automated testing, continuous integration/deployment, monitoring systems)
• Experience with Event-Driven systems and data processing pipelines (Kafka, SNS/SQS, Kinesis, S3, etc)

This role is responsible for leading electrical commissioning efforts within complex construction and mission-critical environments. The position works closely with multidisciplinary teams including engineering, construction, and controls to ensure systems are delivered safely, efficiently, and in accordance with project requirements. The individual will play a key role in driving system readiness, performance, and successful project turnover.

Responsibilities:

• Lead electrical commissioning activities across all project phases, from design review through energization, testing, and final handover.
• Review electrical designs, one-line diagrams, specifications, and control schematics to ensure systems are commissionable and aligned with project requirements.
• Plan and coordinate installation verification, pre-functional checks, energization, and functional testing for electrical systems.
• Oversee QA/QC walkdowns to confirm installation quality and readiness for commissioning.
• Lead and manage safe energization of electrical systems including switchgear, transformers, UPS, and distribution networks.
• Coordinate closely with mechanical, controls/BMS, and construction teams to ensure system integration and readiness.
• Develop and manage electrical commissioning procedures, checklists, and test scripts.
• Identify, track, and drive resolution of commissioning issues through to closure.
• Utilize commissioning tools and platforms to monitor system status, readiness, and progress against project schedules.
• Lead commissioning meetings and provide clear reporting on electrical system readiness, risks, and progress.
• Ensure all electrical systems meet design intent, safety requirements, and client performance expectations prior to handover.
• Support system turnover including documentation completion, as-built verification, and client handover requirements.
• Provide technical leadership, guidance, and mentorship to commissioning engineers and technicians.
• Promote and enforce a strong safety culture, including strict adherence to LOTO, arc flash, and energization procedures.
• Any other duties or responsibilities that may be assigned to you in your role.

Skills Required:

• Strong knowledge of electrical power systems including switchgear, transformers, UPS, and distribution systems.
• Proven experience leading commissioning activities within mission-critical or large-scale construction environments.
• Ability to review and interpret electrical drawings, one-lines, and control schematics.
• Strong understanding of commissioning processes including pre-functional, functional, and integrated testing.
• Experience managing energization procedures and working in high-risk electrical environments.
• Proficiency with commissioning tools and platforms for tracking system readiness and issue resolution.
• Excellent leadership, communication, and stakeholder coordination skills.
• Strong problem-solving skills with the ability to drive issues through to resolution.
• High attention to detail with strong documentation and reporting capabilities.
• Commitment to safety, quality, and compliance with industry standards.

Education / Licenses / Certifications:

• Bachelor’s degree in Electrical Engineering or related field preferred.
• OSHA 10 or OSHA 30 certification preferred.
• NETA certification preferred.
• Professional Engineer (PE) license preferred.
• Proof of education, licenses, and certifications will be required where applicable.

Benefits:

• Medical, Dental and Vision Insurance 
• Life, Short-Term, Long-Term Disability Insurance 
• Training and Education Assistance 
• 401k Retirement Plan 
• Extra Annual Leave with Years of Service 
• Maternity/Paternity Leave 
• Recognition Rewards
  

#INDHP

This role is responsible for supporting the commissioning and startup of medium-voltage electrical systems within complex industrial and mission-critical environments. The position collaborates closely with clients, contractors, utilities, and engineering teams to ensure systems are delivered safely, efficiently, and in accordance with project requirements. The individual will play a key role in driving quality, compliance, and successful system turnover.

Responsibilities:

• Perform commissioning of medium-voltage switchgear, substations, and associated electrical infrastructure.
• Support commissioning of utility interconnections and service entrance systems.
• Commission transformers, protective relays, and grounding systems in accordance with project requirements.
• Oversee commissioning of medium-voltage distribution systems feeding UPS, PDUs, and critical loads.
• Develop, review, and execute commissioning plans, procedures, scripts, and test protocols.
• Coordinate commissioning activities with owners, engineers, contractors, utilities, and Authorities Having Jurisdiction (AHJs).
• Validate system readiness through inspections, functional testing, and integrated systems testing.
• Identify deficiencies, track issues, and verify corrective actions through to closeout.
• Ensure compliance with project specifications, applicable codes and standards (NFPA, NEC, IEEE, NETA, OSHA), and client commissioning requirements.
• Provide on-site technical leadership and mentorship to commissioning staff and field teams.
• Support system start-up, energization, and turnover activities while maintaining strict adherence to safety controls.
• Maintain detailed commissioning documentation, reports, and final turnover records.
• Any other duties or responsibilities that may be assigned to you in your role.

Skills Required:

• Strong knowledge of medium-voltage electrical systems, including switchgear, substations, and power distribution.
• Familiarity with electrical testing standards and practices (NETA, IEEE, NFPA, NEC).
• Proven ability to develop and execute commissioning plans and procedures.
• Strong understanding of system integration, functional testing, and startup processes.
• Excellent troubleshooting and problem-solving skills within energized or pre-energized environments.
• Effective communication and coordination skills with multidisciplinary project teams and stakeholders.
• Ability to lead and mentor field personnel in a fast-paced construction or commissioning environment.
• Strong attention to detail with excellent documentation and reporting capabilities.

Education / Licenses / Certifications

• Bachelor’s degree in Electrical Engineering or related field preferred.
• NETA certification preferred.
• OSHA 10 or OSHA 30 certification preferred.
• Professional Engineer (PE) license preferred.
• Proof of education, licenses, and certifications will be required where applicable.

Benefits:

• Medical, Dental and Vision Insurance 
• Life, Short-Term, Long-Term Disability Insurance 
• Training and Education Assistance 
• 401k Retirement Plan 
• Extra Annual Leave with Years of Service 
• Maternity/Paternity Leave 
• Recognition Rewards
  

#INDHP

Your Impact

As a Priority Support Engineer, you’re not just resolving technical issues — you’re a trusted advisor and escalation authority for Axon’s most critical customers. You’ll have the autonomy to assess complex, high-impact cases, make real-time decisions to stabilize customer operations, and drive cross-functional efforts that shape how Axon delivers world-class support.

You’ll act as the bridge between frontline support, higher support tiers, engineering, and product teams — using your technical acumen and customer insight to influence product improvements, operational workflows, and service-level strategies. Your independent judgment and ownership mindset will directly impact customer trust, product adoption, and Axon’s brand reputation in the field.

This role offers high ownership and autonomy. Engineers are trusted to make informed decisions in complex, ambiguous situations, prioritize high-value work, and serve as technical SMEs for Axon’s most strategic customers. Candidates must be sharp, adaptable, and unstoppable: capable of navigating high-pressure environments with confidence and clarity.

What You’ll Do

Location: Candidates must be located in the following locations: Scottsdale, AZ
Reports to: Manager, Technical Support

• Case Ownership: Full lifecycle ownership of support cases for designated high-priority customers, including triage, prioritization, resolution, and follow-up.
• Independent Judgment: Empowered to make real-time decisions regarding escalation paths, interim solution, and technical approaches based on severity and customer impact.
• Defined Goal Execution: Operate with broad autonomy once objectives are defined (e.g., resolution efficiency, escalation reduction), with latitude in selecting methods and tools to meet outcomes.
• Subject Matter Expertise: Act as a technical SME across specific product domains; contribute to Tier 1 enablement, documentation, and internal training as needed.
• Process Adaptability: Authorized to adapt standard procedures when warranted by situational demands, provided decisions align with core support and customer service objectives.
• Ambiguity Management: Expected to take initiative in undefined or novel scenarios, identifying risks and acting proactively with minimal or no direction.
• This role assumes a high degree of trust and requires consistency in decision-making, accountability for outcomes, and alignment with team-wide quality and communication standards.

What You Bring

• 2+ years technical support experience in complex software, hardware, or cloud-based environments
• Proven ability to exercise independent judgment and make time-sensitive decisions in ambiguous, high-stakes situations
• Deep technical aptitude in Windows environments, networking, mobile ecosystems, and cloud applications
• Exceptional communication and interpersonal skills with ability to adapt language and approach for audiences ranging from IT admins to command staff
• Demonstrated ownership mindset (#OWNIT): proactive, accountable, and results-oriented
• Strong problem-solving ability with a data-driven approach to identifying patterns and preventing recurrence
• Proven ability to work autonomously while effectively influencing across teams and functions

Preferred Qualifications

• Bachelor’s Degree
• Experience in Axon applications (Salesforce, MS Dynamics, JIRA, InContact, and Vonage)
• 2+ years in networking or telecommunications, ideally within public safety or government sectors
• Relevant technical certifications (Network+, CCNA, MCSA, etc)
• System Administration or Cloud Infrastructure certifications

The Spares Planner & Clean Kit Management Planner ensures that all scheduled sanitation and maintenance activities are meticulously planned, kitted, and scheduled. This role bridges the gap between Field service engineers, Service Operations and Logistics, reducing downtime waiting for parts through proactive planning, material management, and scheduling.

The expectation for this position is the ability to work independently and able to multi task on daily operational responsibilities in deadline driven environment. The individual could demonstrate strong commitment to drive results. This position requires the highest level of communication, ownership, responsiveness. Data integrity and attention to detail are paramount. 

Education

Bachelor’s Degree or equivalent work experience (8+ years in related field); College courses in industrial engineering, supply chain, and business administration preferred.

Experience

• 8 or more years’ experience as a planner, expeditor or related experience with inventory control and/or supply chain studies. 
• Spares planning is desirable.
• Knowledge of planning and scheduling systems, planning master data management, purchase order expedites, spares logistics, inventory control theories with prior experience related to semiconductor, electronics industry or related high-volume customers are desirable. 

Skills

• Fluent in English is a must
• Experience with SAP and Microsoft Office Suite (Excel, Word, PowerPoint).
• Strong ability to analyze large datasets, interpret complex data, and derive meaningful insights.
• highest level of communicative competence
• Fluency in Mandarin Chinese is always a plus

Job Description

• Kit Preparation: Build "kits" to ensure Field service engineer / Customer have everything needed for the job before starting.
• Kit Planning & Scheduling: Develop kitting schedules that align with PM cycle.
• Inventory & Supplier Management:
• Analyze historical demand, adjust planning & validate forecasts.
• Manage stocking levels, E&O and inventory rebalancing.
• Support NPI planning, initial stocking strategies, and part lifecycle transitions.
• Monitor and validate MRP accuracy.  Responsible & resolves data integrity issues.  Responds to MRP validation inquiries from purchasing community.
• Expediting materials when foreseeing shortage in material horizontal table.
• Coordination: Act as the primary liaison between FSE, CSR, Buyer, Forecaster, and Logistics.
• Demonstrate ability to lead cross-functional meetings to drive the commitments or results.
• Regular analysis report and Ad-Hoc analysis support are both required.

Apply today to be part of what’s next.

Job Title: Project Engineer

Company: Loenbro, LLC
Business Unit/Department: Engineering                                           
Location: Arizona
Reports to:  Senior Project Manager
Employment Type: Full-Time
FLSA Classification: Exempt

About Loenbro

Loenbro is a trusted, long-term construction lifecycle partner to thousands of customers across the U.S. Our market spans all industries and our service offerings include Critical Electrical, Mechanical & Structural, Soft Crafts, Inspection, Underground Maintenance and Installation, and Fabrication. Our expertise lies in simplifying the complex and establishing long-standing relationships with our partners. We have a national presence but a local approach—every customer benefits from our capabilities and our care.

At Loenbro, we don’t just offer jobs—we build careers grounded in integrity, teamwork, excellence, and purpose. Join a team where your expertise is valued, your growth is supported, and your work helps maintain and enhance the critical infrastructure that powers communities across the nation.

Job Summary
Loenbro is currently looking for a Project Engineer to join the team. You will be a key member of our project management team, responsible for overseeing and managing the technical aspects of mission-critical and data center projects. Your expertise in electrical engineering and project management will contribute to the successful execution of projects.

Essential Job Responsibilities

• Project Planning: Collaborate with Project Managers to develop project plans, including scope, schedule, and budget.
• Technical Expertise: Utilize your electrical engineering knowledge to design, review, and ensure the proper installation of electrical systems, adhering to industry standards and best practices.
• Documentation: Create and maintain accurate project documentation, including technical drawings, specifications, and reports.
• Coordination: Coordinate with project teams, contractors, and subcontractors to ensure the smooth execution of projects.
• Quality Assurance: Conduct inspections and quality control checks to ensure that all work meets safety regulations and quality standards.
• Problem Solving: Address technical challenges and issues as they arise during the project, proposing effective solutions.
• Client Interaction: Interact with clients to understand their technical requirements and provide technical support and expertise as needed.

Other duties may be assigned as needed to support business operations.

Minimum Qualifications

Required:

• 1-3 years of experience as a project engineer, preferably in the electrical construction industry or bachelor’s degree in electrical engineering or a related field (preferred).
• Strong technical knowledge of electrical systems and engineering principles.
• Proficiency in AutoCAD or other design software.
• Excellent communication and interpersonal skills.
• Ability to work independently and as part of a team.
• Strong problem-solving and decision-making abilities.
• Commitment to safety and quality.

Physical Demands and Work Environment

The physical demands and work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

Work Environment:

• Indoor office setting with controlled temperature.
• Outdoor industrial sites with exposure to noise, dust, chemicals, extreme weather, uneven terrain, or other environmental factors.
• Fabrication shops with exposure to noise, dust, chemicals, or other environmental factors.

This role requires compliance with all applicable safety regulations, personal protective equipment (PPE) requirements, and Loenbro's Environmental Health and Safety (EH&S) policies.

Benefits

Loenbro offers a competitive salary, comprehensive benefits package, and rewards to those who join our team:

• Medical, dental, and vision insurance
• 401(k) retirement plan with company match
• Paid time off (PTO) and holiday pay
• Life and disability insurance
• Professional development and training opportunities
• Employee assistance program (EAP)

Benefits eligibility may vary based on employment classification and hours worked.

Guided by Core Values (LEAD), grounded in grit and a commitment to excellence, Loenbro betters our families, customers, and local communities.  If you’re ready to be part of a company that LEADS by:

• Living with Integrity
• Exceeding Expectations
• Acting with Urgency
• Delivering Excellence

…we want to hear from you.

Loenbro is an Equal Opportunity Employer

Project Engineer - Mining 

Company: Loenbro, LLC                                                                             
Location: TBD
Employment Type: Full-Time

Job Summary:
Loenbro Southwest is seeking a Mining Project Engineer who will be responsible for supporting the Project Manager and other project participants as needed by ensuring the success of a project through the technical accuracy of all project aspects.

About Loenbro

Loenbro is a trusted, long-term construction lifecycle partner to thousands of customers across the U.S. Our service offerings include Critical Electrical, Mechanical & Structural, Soft Crafts, Inspection, Underground Maintenance and Installation, and Fabrication, and our vertical market focus spans all industries. Our expertise lies in simplifying the complex, so that our clients gain clarity and control in construction and maintenance. We do this by taking full ownership on every interaction, delivering multi-scope project excellence, and establishing long-standing relationships with our partners as we enhance and maintain your critical infrastructure. We have a national presence but a local approach—so that every customer benefits from our capabilities and our care. Through their relationship with us and the One Loenbro model, our customers are able to simplify, control, and succeed in the everyday.

Essential Job Responsibilities

•    Cooperating and communicating with the Project Manager and other project participants and collaborating with all team members to create more efficient project methods and to maintain the project's profitability.
•    For Projects that require Engineering, coordinate with the Preconstruction Group to attain the Engineering required.
•    Coordinate field test methods and methods for monitoring the quality of those tests based on project requirements and internal quality guidelines.
•    Maintain and organize all construction documentation including but not limited to contract drawings, fabrication drawings, specifications, change order documents, quality, and closeout documentation within the appropriate Procore tools and as outlined in the project requirements.
•    Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.
•    Gather and prepare data for submittal or transmittal to the customer, vendors, subcontractors, governmental agencies, and internal use.
•    Coordinate with Third Party Detailing Service for submittal or transmittal to the customer, vendors, subcontractors, governmental agencies, and internal use.
•    Coordinate field surveying, dimension, and field verification with Superintendent or subcontractor including elevation, control points, and compilation of as-built data.
•    Perform material take offs from drawings, specifications, and other contract documents.
•    Prepare purchase requisitions for required project materials and monitor delivery status in support of construction schedule, construction budget, and project specifications.
•    Provide all project administration and correspondence functions including permitting, bonding, and requests for information (RFIs).
•    Assist PM in the development of SSHEP’s and setting up Project Kick Off Meetings.
•    Assist PM in the development of Subcontract Agreements.
•    Assist PM with the development of the Schedule of Values for billing. 
•    Assist PM with the development of Estimates.
•    Coordinate with other Divisions on estimates.
•    Assist PM with Job Walks to ensure quality estimates are developed.
•    Ensure project estimate is compliant with Loenbro standards.
•    Assist PM to develop and maintain the Project schedule. MS Project experience is a must.
•    Integrate Estimate and Projects according to the latest Procore procedures.
•    Assist PM and Superintendent with Daily Planning.
•    Ensure the development of claiming schemes are set up and Quantity Tracking is performed on all Projects.
•    Update Estimate and Projects with change orders according to the PM.
•    Attend site meetings as needed.

Additional Responsibilities:
•    Performs other related duties as assigned.

Minimum Qualifications

Required:

•    Excellent verbal and written communication skills.
•    Excellent interpersonal and customer service skills.
•    Excellent organizational skills and attention to detail.
•    Excellent time management skills with a proven ability to meet deadlines.
•    Strong analytical and problem-solving skills.
•    Strong supervisory and leadership skills.
•    Ability to prioritize tasks and to delegate them when appropriate.
•    Ability to function well in a high-paced and at times stressful environment.
•    Proficient with Microsoft Office Suite or related software.
•    Proficient with Microsoft Project software.
•    Mining and Open Pit Experience Necessary
•    MSHA Related Compliance Knowledge.
•    Diverse Background knowledge in Fabrication, Steel Erection, Piping, Mechanical, Equipment Setting, Concrete, Civil, and Electrical preferred. At least 50% of Expectations is a must.
•    Understands Mining Equipment such as Crushers, Mills, Flotation Equipment, Moly Plants, Thickener Tanks, Smelters, Acid Plants, Process Equipment, Piping- Carbine-Stainless Steel- HDPE- PVC/CPVC, and SX Plants. 
 
Education and Experience:
Bachelor’s degree in engineering or a similar field
Mining/ MSHA Experience- 2-3 years or more

Physical Demands and Work Environment

The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

Work Environment:

• Indoor office setting with controlled temperature.
• Outdoor industrial sites with exposure to weather extremes.
• Potential exposure to noise, dust, chemicals, or other environmental factors.
• Travel requirements: up to 10% of time.

This role requires compliance with all applicable safety regulations, personal protective equipment (PPE) requirements, and Loenbro's Environmental Health and Safety (EH&S) policies.

Benefits

Loenbro offers a competitive salary, comprehensive benefits package, and rewards to those who join our team:

• Medical, dental, and vision insurance
• 401(k) retirement plan with company match
• Paid time off (PTO) and holiday pay
• Life and disability insurance
• Professional development and training opportunities
• Employee assistance program (EAP)

Benefits eligibility may vary based on employment classification and hours worked.

Our Core Values

LEAD with Values:

• Live with Integrity – We do the right thing and do what we say, in every Interaction - and practice stewardship to car for the communities where we live & work.
• Exceed Expectations – We anticipate customer needs, deliver Innovative solutions, and dedicate ourselves to creating outcomes that make a real difference.
• Act with Urgency – We take action, adapt seamlessly, and keep projects moving without compromising quality - because our customers priorities are our priorities.
• Deliver Excellence – We combine our passion for quality, our Industry expertise, and our eye for Innovation to make excellence our standard.

Guided by core values, grounded in grit and a commitment to excellence, Loenbro maintains and enhances the industrial infrastructure that betters our families, customers, and local communities.

Loenbro is an Equal Opportunity Employer.

Senior Engineer I, Software Engineering

As part of ASM’s Software Engineering team, you’ll develop advanced control software that drives the most sophisticated semiconductor equipment in the world. Your work will directly impact robotics, gas flow systems, and temperature control hardware—delivering real-time results in chip manufacturing. Based in Phoenix, you’ll collaborate globally and help shape the future of semiconductor automation and factory integration.

Responsibilities:

• Design, develop, test, deploy, and maintain software for semiconductor manufacturing equipment
• Build software for Windows and real-time operating systems
• Troubleshoot and resolve issues in real-time control systems
• Triage mechanical, electrical, and software bugs
• Lead escalation calls with field engineers and global customers
• Collaborate with QA and Support teams to manage regression testing
• Author and review system specifications, software designs, and test plans
• Investigate internal and external problem reports and propose solutions
• Evaluate and recommend software engineering tools
• Participate in system design and scheduling efforts
• Integrate and support factory automation protocols such as SECS/GEM
• Work closely with automation teams to ensure seamless equipment-factory communication

Requirements:

• BS Degree in Computer Science or related field. MS preferred.
• Strong software development skills in C#
• 5+ years’ experience as a generalist or mid-stack software developer
• Experience in the semiconductor industry
• Hands-on experience with factory automation systems
• Familiarity with SECS/GEM, GEM300, EDA/Interface A protocols
• Experience with AMHS (Automated Material Handling Systems)

What sets you apart

• 10+ years in software development and architecture
• Experience with:
  • Machine control software (especially for semiconductor equipment)
  • Windows and real-time operating systems
  • Multi-threaded and real-time applications
  • GUI development and device drivers
  • Networking, data communications, and EtherCAT
  • Dynamic scheduling algorithms with deadlock avoidance

Senior Engineer I, Software Engineering - Factory Automation 

As part of ASM’s Software Engineering team, you’ll develop advanced control software that drives the most sophisticated semiconductor equipment in the world. Your work will directly impact robotics, gas flow systems, and temperature control hardware—delivering real-time results in chip manufacturing. Based in Phoenix, you’ll collaborate globally and help shape the future of semiconductor automation and factory integration.

Responsibilities:

• Design, develop, test, deploy, and maintain software for semiconductor manufacturing equipment
• Build software for Windows and real-time operating systems
• Troubleshoot and resolve issues in real-time control systems
• Triage mechanical, electrical, and software bugs
• Lead escalation calls with field engineers and global customers
• Collaborate with QA and Support teams to manage regression testing
• Author and review system specifications, software designs, and test plans
• Investigate internal and external problem reports and propose solutions
• Evaluate and recommend software engineering tools
• Participate in system design and scheduling efforts
• Integrate and support factory automation protocols such as SECS/GEM
• Work closely with automation teams to ensure seamless equipment-factory communication

Requirements:

• BS Degree in Computer Science or related field. MS preferred.
• Strong software development skills in C#
• 5+ years’ experience as a generalist or mid-stack software developer
• Experience in the semiconductor industry
• Hands-on experience with factory automation systems
• Familiarity with SECS/GEM, GEM300, EDA/Interface A protocols
• Experience with AMHS (Automated Material Handling Systems)

What sets you apart

• 10+ years in software development and architecture
• Experience with:
  • Machine control software (especially for semiconductor equipment)
  • Windows and real-time operating systems
  • Multi-threaded and real-time applications
  • GUI development and device drivers
  • Networking, data communications, and EtherCAT
  • Dynamic scheduling algorithms with deadlock avoidance

Your Impact

If you love to get close to your users to understand and solve their problems quickly, this is the place for you. If you thrive on working with other teams to drive solutions quickly on a brand-new product, this is the challenge for you. If you are interested in supporting a mission critical product used to save lives, this is the product for you.

Axon is seeking a high-energy, experienced Software Support Engineer with expertise in cloud solutions. This individual will play an instrumental role in supporting critical escalated issues and customer requests. We need a self-starter who excels in a high-paced, evangelistic startup environment, focusing on law enforcement, thriving on resolving software issues, and building strong customer relationships.

What You’ll Do
Reports to: Manager, Technical Support

• Work closely with Law Enforcement customers to ensure a stellar experience with Axon products and services
• Provide front line support to Axon software customers while logging detailed notes on each customer interaction
• Collaborate with customers to determine the urgency of tickets/requests and identify their priority across engineering teams.
• Research, troubleshoot, diagnose customer issues and requests across all a variety of products and systems.
• Follow up with clients to ensure their systems are fully functional after troubleshooting
• Log & provide detailed notes on each customer interaction
• Develop knowledge base articles on top issues
• Participate in an on-call rotation for outage escalations
• Provide back-up support to other Axon Support teams and colleagues

What You Bring

• 3+ years of support experience for cloud-based products
• Track record of completing goals and driving initiatives to completion
• Experience working within the Law Enforcement/Public Safety space
• Forward Thinking and Task Driven
• Experience solving complex technical problems and leading support related projects
• Strong communication skills and the ability to communicate to both technical and non-technical customers/colleagues.
• Experience working with applications like JSON schemas, GitHub, python, VS Code, Azure Data Studio, SSMS.
• Ability to work independently with substantial latitude for action and decision while maintaining focus on achieving outcomes.
• Must pass a Criminal Justice Information Services (CJIS) background check and maintain confidential and highly sensitive information

Benefits that Benefit You

• Competitive salary and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• And yes, we have snacks in our offices

Benefits listed herein may vary depending on the nature of your employment and the location where you work

We are seeking an R&D Metrology Engineer to join our dynamic materials development labs. The ideal candidate will be self-motivated, hands-on, and a resourceful problem solver with a strong understanding of materials characterization equipment and methods. In this role, you will work closely with ALD and Epi process engineers to develop and optimize next-generation materials for advanced node semiconductor processing.

This position requires working the early morning shift (1^st shift), including weekend coverage, to ensure optimal utilization and uptime of metrology equipment in a fast-paced R&D environment

Key Responsibilities

• Apply advanced metrology techniques to support the company’s materials and process development roadmap.
• Troubleshoot metrology equipment issues and collaborate with vendors to resolve hardware/software malfunctions.
• Partner with process engineers to select appropriate characterization methods and assist in data interpretation.
• Acquire and analyze metrology data; summarize findings for engineering and management review.
• Maintain tool uptime by partnering with vendors and supporting lab operations during off-hours.
• Train engineers on metrology tools, develop SOPs, and create recovery procedures for tool-down scenarios.
• Monitor uptime data; contribute to tool efficiency and continuous improvement initiatives.
• Develop metrology recipes and applications to streamline operations and solve technical challenges.
• Provide on-call support and ensure smooth lab operations during night and weekend shifts.
• Maintain LEAN 6S standards and contribute to a clean, organized lab environment.
• Stay current with industry trends by attending conferences, seminars, and workshops.

Required Qualifications

• Ph.D. in Materials Science and Engineering (preferred), or other engineering fields, Chemistry, Physics, Engineering, or related field.
• Hands-on experience with TEM, STEM, EDS, EELS, SEM, and FIB.
• Familiarity with techniques such as XRR, XRD, XRF, TXRF, FTIR, SPV, four-point probe, Hall effect, and defect inspection tools.
• Solid understanding of semiconductor processing and device fabrication.
• Proficiency in MS Office and JMP; strong data analysis and reporting skills.
• Excellent communication skills and ability to work independently and collaboratively.
• Availability for night and weekend support as needed.

Preferred Qualifications

• Experience developing metrology recipes and turnkey solutions.
• Background in lab operations and equipment maintenance.
• Programming experience, particularly in scripting or automation for data acquisition, data analysis, and tool control.

Senior Solution Sales Engineer - 

Position Description: 

We believe Solutions Engineers at Okta are involved in all stages of the customer’s development lifecycle and are experienced using presentations, email, phone and social media to connect with customers. We are looking for great teammates that can build sales presentations, product demonstrations, and educate customers (everyone from developers to product managers to C-level executives) on the best ways to cloud security technology.  We believe in Okta’s Solutions Engineers empathize with customers and quickly discern their true technical needs by asking detailed and clarifying questions and presenting solutions that target those needs. You have the rare combination of technical savviness and business insight and you’re looking for a career where you can utilize both. As a Senior Solutions Engineer at Okta, you will hone each of these skills by advising a diverse set of Fortune 500 customers on what is possible using Okta’s Identity Platform. 

Job Duties and Responsibilities:

• Collaborate with account executives to develop and execute territory and account strategies to maximize the Okta opportunity in those accounts
• Conduct research and discovery to understand customer requirements and communicate the business value of solving technology problems using cloud technology
• Execute the delivery of POCs for customers with complex use cases, collaborating with other Okta engineering teams as needed
• Craft technical content to show customers how to implement specific use cases or standard methodologies for new technologies
• Prepare and deliver demos to showcase how the Okta platform meets customer’s business needs and use cases.  
• Distill and communicate customer needs and product feedback to Product Management, Engineering, Marketing and Sales

Required Skills:

• 5+ years pre-sales engineering experience
• A passion to serve the customer, which has played out in some customer-facing role like consulting or support, ideally solutions engineering
• An ability to quickly and effectively communicate complex technical concepts via presentation, slides and whiteboard 
• A Strong Understanding of Identity & Access Management (IAM)
• SSO, MFA, SCIM, OAuth 2.0, OIDC, SAML, and LDAP.
• Lifecycle management, role-based access control (RBAC), and provisioning/deprovisioning.
• A strong understanding of Zero Trust Architecture and core security concerns within a typical application (password hashing, SSL/TLS, encryption at rest, XSS, XSRF)
• Hands-on experience in one or more of the following areas is a plus: web (JavaScript, HTML, frontend frameworks) development, mobile (iOS, Android) development, backend (Java, C#, Node.js, Python, PHP, Ruby) development, IP-based real-time communications
• Experience with cloud platforms: AWS, Azure, GCP.
• You are an elite communicator
• Can identify, map, and manage multiple personas: IT admins, CISOs, architects, procurement, and legal.
• Confident dispensing knowledge to a highly skilled and experienced audience
• Typically 10-25% travel
• Bachelor's degree in Engineering, Computer Science, MIS or a comparable field is preferred.

 This role requires in-person onboarding and travel to an office in the U.S. during the first week of employment.

#LI-hybrid

#LI-LSS1

P13951_3337053

The Maneuver Dominance team at Anduril develops operationally relevant, multi-asset autonomy. We are focused on building the next generation of autonomous capabilities by leveraging existing Anduril platforms like Ghost or Altius, bringing 3rd party platforms into Anduril's Lattice ecosystem, and developing breakthrough systems that will shape the future of the battlefield. If you are interested in working in an extremely innovative and fast paced environment, where your work directly makes an impact and difference in the products that are fielded this a fantastic opportunity.

As an Aviation Maintenance Engineer you will ensure the airworthiness and mission readiness of developmental UAS platforms across assembly, maintenance, and flight test operations. You will work alongside a team of engineers, test pilots, and test specialists, contributing hands-on mechanical expertise to aircraft assessment, maintenance coordination, and reporting on all facets of aircraft readiness. This role is central to enabling safe and efficient developmental flight test under both civil and military approval frameworks.

What You'll Do

• Assist with many aspects of aircraft assembly, planned and preventative maintenance, and operation including mechanical integration (flight control surfaces, propulsion), composites fabrication, and avionics build/integration/test.
• Troubleshoot, repair, and maintain aircraft and subsystems including landing gear, fuel system, flight control, and propulsion.
• Perform common airframe construction techniques.
• Complete aircraft and equipment documentation.
• Troubleshoot, repair, and maintain site support equipment.
• Communicate mechanical assessment with engineering and production.
• Perform validation and testing of various electronic components using equipment such as multimeters, oscilloscopes, network analyzers, and test racks.
• Perform proper FOD and tool control practices.

Required Qualifications

• 5+ years rotorcraft experience.
• Valid FAA Airframe & Powerplant (A&P) license.
• Excellent communication and teamwork abilities.
• Proficient with computer use (standard browser, word processing applications).
• Willing to be multi-capable, including some electronics troubleshooting and repair.
• Strong problem-solving skills and attention to detail.
• Ability to rapidly change roles/responsibilities while working in a fast paced, challenging work environment.
• Willing to travel international and domestic on an as needed basis.

Preferred Qualifications

• US security clearance eligible.
• Experience with both electric and turbine power plants.

About Team & About Role:

Rubrik’s sales organization is a united group of elite cross-functional sales professionals that help companies & government entities achieve resilience against cyberattacks, malicious insiders, and operational disruptions. We offer continuous professional development through our world class sales enablement program and our One Rubrik selling approach provides all the resources you need to exceed your goals, maximize your earnings potential and take your career to the next level. All this while doing something that truly matters, protecting the world's data.

As a SaaS Product Line Specialist Sales Engineer, you will provide technical direction and business guidance to the regional sales team. We are seeking a self-starter who will exceed sales quotas by driving innovative technical programs, pipeline generation alongside AEs, customer demonstrations, POCs, and overseeing day-to-day account-level activities. You will be responsible for evangelizing, positioning, and architecting Rubrik’s Data Resilience, Observability and Remediation tools to a targeted list of new & existing customers throughout the Western Region.

What You'll Do:

• Provides technical leadership and direction to Rubrik, customers, and prospects in the development and positioning Rubrik's SaaS solutions (M365, Google Workspace, Jira, Dynamics)
• Serves as a trusted technology advisor to customers and serves as a public cloud subject matter expert when positioning Rubrik's SaaS capabilities to key accounts.
• Leads technical sales calls, gathers / analyzes customer feedback, and identifies trends.
• Qualifies sales opportunities in the terms of customer technical requirements, competition, decision making process and funding.
• Maintains a consistent cadence with product management to ensure product roadmap alignment with customer demands.
• Assists with the development of marketing and sales collateral to ensure alignment with customer needs and technical accuracy.
• Aids in the development and delivery of technical enablement to Rubrik, channel, and alliance partner sales architects.
• Cross-functionally drives the adoption of Rubik's cloud native protection technologies throughout Rubrik and the public cloud ecosystem.

Preferred Qualifications:

• 5+ years of sales engineering experience in an unstructured data environment with a proven track record of success
• Additional preference for experience with M365, Google Workspace, Dynamics, Jira and other SaaS applications
• Driven – need for success, highly energetic with a strong hands-on, “can do” approach.
• The successful candidate must have a fundamental breadth of technical knowledge in cloud data management, backup and disaster recovery and data analytics.
• Entrepreneurial - willing to go the extra mile, strong work ethic, resourceful, “get it done” attitude
• Strives in moving in a fast-paced environment; including handling multiple calls/demos per day with immediate follow up.
• A high level of business acumen and experience working with Cx0 level personnel, bringing technology solutions to solve business challenges.
• Smart, adaptable and open-minded

#LI-CG1

About the Company

Gemini is a global crypto and Web3 platform founded by Cameron and Tyler Winklevoss in 2014, offering a wide range of simple, reliable, and secure crypto products and services to individuals and institutions in over 70 countries. Our mission is to unlock the next era of financial, creative, and personal freedom by providing trusted access to the decentralized future. We envision a world where crypto reshapes the global financial system, internet, and money to create greater choice, independence, and opportunity for all — bridging traditional finance with the emerging cryptoeconomy in a way that is more open, fair, and secure. As a publicly traded company, Gemini is poised to accelerate this vision with greater scale, reach, and impact.

The Department: Enterprise Infrastructure

Within Operations, the Enterprise Infrastructure team owns the internal technology ecosystem that supports Gemini's offices and employees. The team operates as a unified engineering and service organization, combining front-line support excellence with DevOps-driven platform engineering under a single mandate.

Our enterprise technology strategy fuels business growth through an engineering-first approach by delivering a modern, secure, and scalable foundation for seamless collaboration, efficient operations, and future-ready innovation. By emphasizing operational excellence, continuous improvement of existing systems, and strategic automation – including Infrastructure as Code, GitOps workflows, and AI-augmented operations – we position IT as an engineering discipline whose impact extends across the department and the broader organization.

The Role: Staff Enterprise Infrastructure Engineer

As a Staff Enterprise Infrastructure Engineer, you will serve as a technical leader and force multiplier across the full breadth of Enterprise Infrastructure – from end-user support excellence to backend platform engineering and automation.

You will apply DevOps methodologies to drive the design, implementation, and continuous improvement of the systems that underpin Gemini's global workforce. This includes owning strategies and execution for endpoint management, user identity and access lifecycle, internal tooling, Infrastructure as Code, CI/CD pipelines, and AI-augmented operational workflows. You will define and track key metrics, communicate trends and capacity insights to leadership, and make strategic decisions about tooling adoption, vendor relationships, and architectural direction with an awareness of how these decisions impact teams and stakeholders beyond Enterprise Infrastructure.

A core expectation of this role is that you approach problems with an eye toward scalability and sustainability, building systems that reduce manual toil, improve reliability, and position the team for rapid growth. You are expected to critically evaluate existing systems and processes, challenging assumptions, identifying inefficiencies, and driving improvements to legacy workflows with the same rigor applied to new builds. You will act as a mentor and escalation point for others, fostering a culture of engineering rigor within support operations and a culture of user empathy within engineering work.

The ideal candidate has deep experience across both operational support and DevOps-driven infrastructure, thrives in ambiguity, and is energized by the challenge of consolidating legacy tooling into modern, automated, GitOps-driven workflows. They bring a pragmatic approach to adopting emerging capabilities – including agentic AI – and are motivated by building solutions that scale beyond their immediate team to benefit the broader organization.

This role is required to be in person 5 days per week at our Tempe, AZ office.

Responsibilities:

• Office & Endpoint Operations

  • Manage hardware inventory, secure storage, and physical IT infrastructure across global office locations.
  • Administer and support endpoint fleets including provisioning, patch management, and peripheral troubleshooting.
  • Support office A/V systems, network connectivity, and conference room technology.

• Service Operations & Delivery

  • Resolve service and incident requests with quality, speed, and thorough documentation.
  • Manage user identity and access lifecycle – including SSO, SCIM, MFA, and security key administration.
  • Maintain and improve SaaS platform configurations, vendor relationships, and internal support workflows.
  • Track operational metrics, surface trends, and communicate capacity insights to leadership.

• Platform Engineering & Automation

  • Build and maintain infrastructure using IaC, configuration management, and GitOps-driven deployment workflows.
  • Develop internal tools and integrations that automate fleet operations, user lifecycle management, and cross-service orchestrations
  • Design and operate CI/CD pipelines for infrastructure changes, tooling, and endpoint configurations.
  • Lead endpoint management platform migrations, including policy authoring, GitOps-managed profiles, and fleet-wide telemetry.
  • Design and implement agentic AI workflows to augment IT operations, applying context engineering principles to enable reliable, bounded automation and validations.

Minimum Qualifications:

• 8+ years of progressive experience in enterprise IT, infrastructure engineering, or a DevOps-focused support capacity.
• Strong proficiency with macOS fleet management at scale using MDM platforms.
• Hands-on experience with Infrastructure as Code and configuration management tooling.
• Proficiency in at least two of the following languages: Go, Python, Swift – with demonstrated ability to build production-grade internal tooling and API integrations.
• Deep experience with identity and access management platforms (Okta, Google Workspace, Active Directory), including SSO, SCIM, Device Assurance Policies, MFA, and user lifecycle automation.
• Working knowledge of CI/CD pipelines (GitHub Actions or equivalent) and Git-based development workflows.
• Solid understanding of networking fundamentals.
• Experience with AWS cloud services in a production or internal-tooling context.
• Proven ability to communicate complex technical concepts to both technical and non-technical audiences, including leadership.
• Experience mentoring junior engineers and contributing to team culture, hiring, and process improvement.

Preferred Qualifications:

• Experience in fintech, crypto, or regulated financial services environments.
• Experience with FleetDM and osquery for endpoint telemetry, compliance, and GitOps-managed device configuration.
• Experience designing agentic AI harnesses and workflows or applying context engineering techniques to augment operational processes (e.g., Claude Code, OpenCode, LLM-driven automation).
• Proficiency in Go, Python, and/or Swift for internal tooling development.
• Hands-on experience deploying reliable tools via Containerization and Orchestration (Docker, Kubernetes/EKS).
• Experience managing 1,000+ user accounts across a globally distributed workforce.
• Working knowledge of the Apple MDM protocol and open-source macOS tooling (Munki, AutoPkg, SaltStack, etc.).
• Experience with A/V systems administration (Crestron, Logitech, Chromebox for Meetings).
• SaaS Administration experience (Anthropic, Atlassian, Google Workspace, Linear, Okta, & more), service management workflows, and SLA reporting.

• Competitive starting pay
• A discretionary annual bonus
• Long-term incentive in the form of a new hire equity grant
• Comprehensive health plans
• 401K with company matching
• Paid Parental Leave
• Flexible time off

At Gemini, we strive to build diverse teams that reflect the people we want to empower through our products, and we are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. Equal Opportunity is the Law, and Gemini is proud to be an equal opportunity workplace. If you have a specific need that requires accommodation, please let a member of the People Team know.

#LI-AA1

What You'll Do 

1. Design and implement containerized microservices within an AWS environment (Lambda, ECS)
2. Lead the design of relational database schemas (Postgres), prioritizing query performance engineering and indexing strategies to handle large, readily available SDA datasets
3. Own the end-to-end feature development and integration of streaming and batch ETL pipelines
4. Familiarity with deploying ML models in production and adding instrumentation to monitor model performance
5. Help with architecture design and defining technical direction
6. Mentor and help develop other less experienced engineers 

What We Value:

1. Strong ownership mentality – you’ll lead technical execution and ensure your features make it from development to production
2. Accountable – The team knows they’ll be able to depend on you
3. Curiosity – We are solving the hardest problems in space and want to hear everyone’s voice to ensure we’re always innovating
4. Leadership – You will be on a small team and will be empowered to help grow the culture and influence technical direction 

Your Ideal Background:

Required:

1. 5+ years of full-time software engineering experience
2. Experience working in the defense/space industry
3. Comfortable working in a small, fast-paced Agile environment
4. Strong communication skills and ability to execute under uncertainty
5. Familiarity with one or more of the following: Machine Learning, SDA, Backend Development
6. Proficiency in Linux, Python, SQL, Docker, and AWS
7. Eligible to obtain and maintain an active U.S. security clearance 

Nice to Have: 

1. Experience instrumenting microservices with Observability (we use the LGTM stack)
2. Comfortable leading algorithm development across different SDA data modalities (EO, Orbital, RF, etc.) to solve problems such as anomaly detection, pattern-of-life modeling, or maneuver detection 

Compensation and Benefits:  

Your base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.  The anticipated salary range for this role is $150,000 - $190,000 annually.

Base salary is just one part of your total rewards package at Katalyst. You will also be eligible for long-term incentives, in the form of the Employee Stock Option and Equity Plan, as well as a relocation bonus and other discretionary bonuses. You will also receive access to comprehensive medical, vision, and dental coverage, and unlimited Paid Time Off.

At Katalyst our work on projects involving the U.S. Department of Defense requires adherence to International Traffic in Arms Regulations (ITAR), 22 C.F.R. Parts 120-130, which requires compliance with U.S. export laws before allowing employees to perform certain positions. Currently, our available roles necessitate access to ITAR-controlled information, and as a result, Katalyst would have to ensure any non-US person is authorized access to ITAR information before the commencement of employment. We are committed to equal employment opportunities and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin.

*remote work will require an exception from the hiring team

Location

This role requires working from our downtown Toronto office 4 days/week (Mon, Tues, Thurs, Fri). Candidates must be based within a 50-mile commuting distance of the office.

About the Role

At Opendoor, AI isn’t a side project - it’s how we work. Across the company, teams default to AI to solve problems, ship faster, and remove friction from everything we do. You will help define the future of how we work by building AI powered workflows, automation, and experiences that drive leverage across Finance — spanning month-end close, SEC Reporting, FP&A, Technical Accounting, Tax, Procurement, Accounts Payable, and Payroll. This is high agency work in high ambiguity - turning messy problems into clean solutions, prototyping fast, and shipping.

You'll make systems design and tooling decisions that affect how our Finance operations scale – so we need people who think critically about what and why they build, the impact it will have on our team, and how to measure success. 

We're looking for AI-native builders who know how to automate complex operational workflows. The accounting and finance domain knowledge can be learned — what matters most is that you're wired to build, that you default to AI in how you approach problems, and that you can map messy business processes into clean, automated systems. 

Why Join Us

• Build AI automation for our Financial Operations from the ground up
• Work on cutting-edge systems directly impacting key Finance processes in a public company 
• Collaborate with talented engineers and finance team members
• Access to enterprise AI tools — Claude Code, Cursor, and LLM APIs. We invest heavily in AI infrastructure so you can build and experiment.

What You'll Do

This is a hands-on individual contributor role. You will design, build, and ship automations — not just evaluate tools or write strategy decks.

• Turn complex Accounting and Finance problems into clear system designs, experiments, and implementation plans
• Build and maintain AI-powered automation that improves operational efficiency, accuracy, and scale across Finance functions
• Automate workflows (journal entries, reconciliations, flux analysis) using SQL, Python, and agentic AI
• Maintain clean, auditable data throughout automated workflows, with dashboards and controls that support both operational and compliance needs
• Partner with the internal SOX team and external auditors to ensure automated processes meet compliance standards and are well-documented
• Build and scale AI literacy across the Finance team through runbooks, documentation, best practices, and hands-on training 

What You'll Bring

• At least 5+ years of work experience building automation, operational workflows, or data systems in any industry. 
• Familiarity with LLM deployment, context engineering and comfortable writing SQL or Python code
• Understanding of machine learning lifecycle concepts: training, evaluation, deployment, monitoring

Systems Thinking: You understand how data flows through operational systems. You can look at a business process, identify the inputs, outputs, dependencies, and failure modes, and design automation around it.

System Design: You take complex, messy problems and reduce them to simple, durable architecture. 

Communication: Articulate problems clearly to both technical and non-technical audiences. You write clean documentation, build dashboards that tell a story, and can walk a stakeholder through your design rationale.

AI Alchemy: You have high agency and a tinkering mindset. You default to experimenting, running variations with new tools and methods - LLMs, automation platforms, coding assistants until you can transmute data into high quality results. You're comfortable writing SQL code, working with APIs, and stitching tools together to ship solutions fast.

Impact Driven: You optimize for impact over novelty, choosing the right tools for the job and ensure performance, scalability and resiliency.

Bonus if you have:

• Experience in Accounting or Finance 
• Comfort working in regulated or compliance-sensitive environments

Tools and Technologies

You'll work across a range of tools and we expect this list to evolve. Ideal candidates will have experience with the following tech stack:

• AI coding assistants: Claude Code, Cursor, or similar 
• Workflow automation: Gumloop or similar platforms
• MCP integrations
• Agentic AI frameworks or building automation flows 
• Data / ERP platforms: Snowflake, NetSuite, Ramp or similar 

Note: Opendoor provides enterprise-level access to all AI tools listed above. Our engineers currently consume billions of AI tokens per month across the company and are not constrained by token limits or personal account restrictions.

Compensation

Our compensation plan consists of a base salary and Opendoor equity  in addition to a comprehensive package of benefits including paid time off, paid holidays, medical/dental/vision insurance, basic life insurance, and 401(k) to eligible employees.  All compensation parameters are based on experience.

 #LI-DM

#LI-Onsite

job purpose:

fairlife operates two large low acid aseptic bottling facilities in Coopersville, MI and Goodyear, AZ as well as a smaller filtrated products manufacturing site in Dexter, NM. A third large plant is currently being commissioned in Webster, NY. The technical team also supports the fairlife Canada plant in Peterborough, ON.

The Utilities & Mechanical Engineer is responsible for providing specialized technical oversight, and leading projects through design, construction and operation for all plant utilities systems, ensuring the assigned plants are not stopped due to insufficient utility capacity, reliability or incorrect operation while implementing a utilities strategy to deliver company efficiency and sustainability goals.

Apart from technical and people skills, this position requires a strong sense of purpose and ownership in your work, urgency in dealing with issues with minimal supervision, a desire to constantly learn and above all a ‘One Team’ mind set to work through challenges.

responsibilities:

• Develop predictive demand, situation analysis tools and load management tools for utility systems based on forecasted plans for existing and new plants ensuring sufficient capacity and cost-effective operation.
• Define the standards to which all plant utilities will be designed, automated, constructed and operated under the locational quality and supply profiles negotiated with utilities suppliers while meeting all relevant Federal, State and Corporate laws, rules and regulations and sustainability goals.
• Document and clearly communicate the basis of design of all installed equipment to the plants key stakeholders.
• Provide technical support for the procurement of utilities from utility providers. A key decision maker in utilities equipment vendor selection and contract negotiation and contributor to budgeting and justification of capital projects.
• Lead construction phase and collaborate with plant & project engineering teams to ensure all project work gets performed on time and within budget including leading and supporting commissioning and validation activities, review and execution of Factory Acceptance Test and Site Acceptance Test (FAT/SAT) protocols, developing and delivering training materials.
• Technical oversight of new line/plant mechanical & utility design (mass/media balance, utilities process flow diagram, functional specifications, PID approval, HAZOP, FAT, DQ, OQ, PQ, training, ramp up etc.) and maintain up-to-date documentation.
• Solving complex processing, mechanical and utility problems following escalation from plants to improve reliability, reduce downtime, improve load management, reduce cost of ownership etc.
• Other duties as assigned.

skills/qualifications required:

• Bachelor’s degree in engineering: mechanical or chemical engineering with experience in dairy industry, or process engineering with experience in wider food industry. Advanced degrees or other professional certifications preferred but not required.
• 5+ years of progressive experience in utilities design, operations and construction within milk, brewing/beverage, and chemical processing. Direct experience with design, construction, commissioning and troubleshooting of utilities is required.
• Work experience with an engineering design and construction firm as a P. Eng is highly preferred.
• Proven track record of improving manufacturing processes through re-design and automation, and the introduction of new technologies.
• Data analysis and Process modeling in Microsoft Excel is required. Process and utility modeling using software’s such as Aspen, SuperPro or others will be a value addition.
• Demonstrated excellence in communication and presentation.
• Ability to handle ambiguity and thrive in a fast paced, entrepreneurial work environment;

food safety requirements:

• Notify management of any repairs or adjustments that are required that may affect product quality or food safety.
• Perform all duties necessary to meet Company, Customer and/or Government requirements/standards as prioritized by the Company.
• Ability to initiate action to prevent the occurrence of nonconformities relating to Food Safety and the Quality of the product, processes, quality system, or safety system.

• Comprehensive medical, dental, and vision coverage
• Supplemental health plans (hospital indemnity, accident, and critical illness insurance)
• Paid Time Off to recharge and support work-life balance
• Paid parental leave & adoption assistance (up to $10,000)
• Parental support & family care benefits, including childcare resources and lactation support
• 401(k) to support retirement planning with up to 9% in employer match
• Wellness reimbursement (up to $500 for qualified wellbeing expenses)
• Employee Assistance Program (EAP) for emotional wellbeing and work-life support
• Company-paid life insurance and short-term disability
• Employer HSA funding (for HDHP participants)
• Tuition reimbursement (up to $10,000) and student loan repayment ($200/month)
• Learning & development programs to unlock your full potential
• Rewards & recognition, matching gifts, free product, and Business Resource Groups

position location: Webster, NY, Coopersville, MI, or Goodyear, AZ

reports to: Sr Process Development Engineer

travel: Average 30%, can range from 30% - 75% based on project timelines. Minimal international travel for FATs.

The application window will be open until at least April 24, 2026 . This opportunity will remain online based on business needs which may be before or after the specified date.

This role is not eligible for immigration sponsorship.

This role is part of the Growth department on the Digital team. You'll collaborate with ad operations and growth specialists to deliver web, app, and media analytics to key stakeholders. The Growth team works across departments—including sales, marketing, brand, and product—to identify new opportunities and test strategies to drive revenue and improve the customer experience with GFiber’s products.

Role Description

As the Marketing Web Developer you will be the technical lead responsible for managing GFiber’s websites and integration points, supporting digital marketing and sales efforts. You’ll lead, organize, and manage program activities that drive business outcomes while developing systems to proactively identify improvements and drive future optimizations including change management and performance metrics. You'll oversee content management systems, A/B testing tools, and tracking implementations, ensuring smooth operations and optimal performance. Collaboration with cross-functional teams will be key in driving our analytics, marketing, and growth initiatives.

In this role, you'll:

• Engineer and maintain the GFiber web architecture, writing clean, scalable code to integrate marketing technology stacks and third-party services. 
• Implement and manage tools for content management, knowledge management, A/B testing, tracking, and services integration.
• Create technical design documents for new website features and integrations.
• Manage user access, roles, and responsibilities for web tools like Contentful, Optimizely, and KMS Lighthouse.
• Support change requests, issue management, and day-to-day updates related to website content and services, and also align with stakeholders on decisions and changing circumstances.

At a minimum we'd like you to have:

• Bachelor's degree in Digital Marketing, Computer Science, or related fields—or equivalent practical experience.
• 4 years' experience building high-traffic marketing websites and scalable web systems using React, Typescript and JavaScript.
• Experience with A/B testing tools (e.g. Optimizely, Optimize, Test and Target) and experiment configuration.
• Experience implementing and leveraging analytics, tracking and data warehouse platforms (e.g., Google Analytics 4, Google Tag Manager, BigQuery).

It's preferred if you have:

• Experience with headless Content Management Systems (e.g. Contentful, Sanity).
• Experience with ad-tech integrations and custom tracking pipelines for Google Ads and Campaign Manager, ensuring accurate reporting and data attribution for high-traffic marketing sites via API. 
• Experience with AI tools coding tools and LLM technologiesExperience using written and verbal communication to convey technical requirements to both technical and non-technical stakeholders.
• Experience with Python and back-end integrations to support large-scale consumer traffic.

The US base salary range for this full-time position is between $132,800 - $175,100 + bonus + cash award + benefits. As pay varies by location, your recruiter will share more about the specific salary range for your targeted location during the hiring process.

#LI-DNI

This role supports the commissioning and startup of electrical systems within complex construction and mission-critical environments. The position works closely with commissioning engineers, construction teams, and controls specialists to ensure systems are installed, tested, and energized safely and efficiently. The individual will play a key role in supporting system readiness, testing, and successful project handover.

Responsibilities:

• Support commissioning activities across all project phases, from design review through energization, testing, and final handover.
• Review electrical drawings, one-line diagrams, specifications, and control schematics to understand system design and identify potential issues.
• Perform installation verification and QA/QC walkdowns for electrical systems including switchgear, panels, transformers, UPS, and distribution systems.
• Execute pre-functional checklists to ensure systems are safe, complete, and ready for energization.
• Verify critical pre-energization requirements including insulation resistance (megger), continuity, torque checks, labeling, and grounding.
• Support safe energization of electrical systems in coordination with construction teams, vendors, and safety personnel.
• Assist with functional testing of electrical systems including power distribution, interlocks, alarms, and control sequences.
• Coordinate with controls and BMS teams to verify system integration and communication.
• Identify, document, and track commissioning issues through to resolution.
• Maintain accurate commissioning documentation including test records, checklists, and issue logs.
• Utilize commissioning tools and platforms to track system status, energization readiness, and testing progress.
• Participate in commissioning meetings and provide updates on system readiness and testing status.
• Support system turnover activities including completion of documentation and client handover.
• Follow all site safety procedures including LOTO and arc flash requirements while promoting a strong safety culture.
• Any other duties or responsibilities that may be assigned to you in your role.

Skills Required:

• Strong understanding of electrical systems including switchgear, transformers, UPS, and power distribution.
• Ability to read and interpret electrical drawings, one-lines, and control schematics.
• Familiarity with commissioning processes including pre-functional and functional testing.
• Knowledge of electrical testing methods such as insulation resistance (megger) and continuity testing.
• Understanding of safety procedures including LOTO and arc flash requirements.
• Strong attention to detail with excellent documentation and reporting skills.
• Effective communication and coordination skills across multidisciplinary teams.
• Ability to troubleshoot and resolve field issues in a fast-paced environment.
• Experience using commissioning or construction management software tools.
• Ability to work both independently and as part of a team.

Education / Licenses / Certifications:

• Associate’s degree in Electrical Engineering Technology or related field preferred.
• OSHA 10 or OSHA 30 certification preferred.
• Electrical or commissioning-related certifications preferred.
• Proof of education, licenses, and certifications will be required where applicable.

Benefits:

• Medical, Dental and Vision Insurance 
• Life, Short-Term, Long-Term Disability Insurance 
• Training and Education Assistance 
• 401k Retirement Plan 
• Extra Annual Leave with Years of Service 
• Maternity/Paternity Leave 
• Recognition Rewards
  

Your Impact

The Technical Support Engineer provides  2nd & 3rd level support to Dedrone by Axon customers and partners worldwide. With your ability to research, diagnose, troubleshoot, and resolve issues, and with your excellent communication skills, you will continually innovate to ensure Dedrone by Axon is offering the best level of service to the customer’s satisfaction. This is a customer focused, technical, hardware and software-related support position with responsibilities for meeting or exceeding performance and quality goals.

What You’ll Do 
Location: Sterling, VA or Mesa, AZ offices - 4 days in-office required
Reports to: Manager, Technical Support – Dedrone by Axon

• Develop a complete understanding of the Airspace Security Solutions by Dedrone by Axon
• Provide 2^nd and 3^rd level support for the Dedrone by Axon Product Family to field engineers and customers
• Research and identify solutions to resolve software and hardware issues
• Diagnosing and troubleshoot technical issues, including account setup and network configuration
• Take ownership of customer issues reported and seeing problems through to resolution
• Track internal and external requests and technical issues to resolution, within agreed time limits
• Update, maintain and monitor our customer systems as a full service
• Ensure all requests and issues are properly logged
• Prioritize and manage several open issues at one time
• Document technical knowledge in form of notes and manuals
• Follow standard procedures for proper escalation of unresolved issues to the appropriate internal teams
• Work with engineering and development teams to perform root cause analysis
• Take part in On-call Support and weekend coverage

What You Bring

• Bachelor’s degree in computer science or a related field, or 7+ years relevant work experience preferred
• Previous practical work experience in the field of customer support
• Excellent troubleshooting skills at all levels to be able to identify and quickly resolve issues
• Strong knowledge of routing/switching
• Very good knowledge in networks and Linux
• Strong sense of ownership and urgency
• Ability to work well in a team and enjoy knowledge sharing
• Excellent communication skills with the ability to provide advice to non-technically aware customers
• Willing and able to travel
• Good knowledge about consumer UAV protocols and standards
• Basic knowledge and understanding of RF technology
• Basic understanding of cloud computing solutions
• Drone pilot license in future
• Must pass a Criminal Justice Information Services (CJIS) background check and maintain confidential and highly sensitive information.
• US Citizenship is required with the ability to obtain US Government security clearance
• Fluent English & Spanish

Benefits that Benefit You

• Competitive salary and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• And yes, we have snacks in our offices

Benefits listed herein may vary depending on the nature of your employment and the location where you work.

What The Role Is

We are seeking a talented Senior Data Engineer to design, build, and maintain our data infrastructure supporting mission-critical energy operations. You'll work at the intersection of renewable energy and data, developing pipelines that process everything from real-time asset performance data to complex trading and risk analytics. This hybrid role offers the opportunity to make a direct impact on clean energy operations while working with a cutting-edge data stack including Snowflake, Dagster, dbt, Modal, and GitLab.

What You'll Be Doing

Analytics Infrastructure & Data Warehouse Management

• Design, deploy, and maintain scalable data infrastructure to support enterprise analytics and reporting needs
• Manage Snowflake instances, including performance tuning, security configuration, and capacity planning for growing data volumes
• Optimize query performance and resource utilization to control costs and improve processing speed

Data Pipeline Development & Orchestration

• Build and orchestrate complex ETL/ELT workflows using Dagster to ensure reliable, automated data processing for asset management and energy trading
• Develop robust data pipelines that handle high-volume, time-sensitive energy market data and asset generation and performance metrics
• Implement workflow automation and dependency management for critical business operations

Data Transformation & Analytics Support

• Develop and maintain dbt models to transform raw data into business-ready analytical datasets and dimensional models
• Create efficient SQL-based transformations for complex energy market calculations and asset performance metrics
• Support advanced analytics initiatives through proper data preparation and feature engineering

Data Quality & Governance

• Implement comprehensive data validation, testing, and monitoring frameworks to ensure accuracy and consistency across all energy and financial data assets
• Establish data lineage tracking and privacy controls to meet regulatory compliance requirements in the energy sector
• Develop alerting and monitoring systems for data pipelines, including error handling, SLA monitoring, and incident response

CI/CD & DevOps

• Lead continuous integration and deployment initiatives for Dagster and dbt pipelines, and Streamlit/Gradio application deployments to Linux servers
• Implement automated testing and deployment automation for data pipelines and analytics applications
• Manage version control and infrastructure as code practices

Cross-functional Collaboration

• Partner with Analytics Engineers, Data Scientists, and business stakeholders to understand requirements and deliver solutions
• Work closely with asset management and trading groups to ensure real-time data availability for market operations and risk calculations
• Collaborate with credit risk teams to develop data models supporting financial analysis and regulatory reporting
• Translate business requirements into technical solutions and communicate data insights to stakeholders

Documentation & Security

• Create and maintain technical documentation, data dictionaries, and onboarding materials for data assets
• Implement role-based access controls, data encryption, and security best practices across the data stack
• Monitor and optimize cloud infrastructure costs, implement resource allocation strategies, and provide cost forecasting

What You'll Bring

• Experience: 4+ years of hands-on data engineering experience in production environments
• Education: Bachelor's degree in Computer Science, Engineering, or a related field
• Data Orchestration: Proficiency in Dagster for pipeline scheduling, dependency management, and workflow automation; Airflow experience a plus
• Cloud Data Warehousing: Advanced-level Snowflake administration, including virtual warehouses, clustering, security, and cost optimization
• Data Transformation: Proficiency in dbt for data modeling, testing, documentation, and version control of analytical transformations
• Programming: Strong Python and SQL skills for data processing and automation
• CI/CD: 3+ years of experience with continuous integration and continuous deployment practices and tools; proficiency in GitLab CI/CD required (GitHub Actions experience a plus)
• Database Technologies: Advanced SQL skills, database design principles, and experience with multiple database platforms
• Cloud Platforms: Proficiency in AWS/Azure/GCP data services, storage solutions (S3, Azure Blob, GCS), and infrastructure as code
• Data Integration: Experience with APIs, various data connectors, and formats
• Data Security: Understanding of data security best practices, access controls, encryption, and role-based access management
• AI & LLM Proficiency: Practical experience integrating and leveraging large language models (e.g., OpenAI, Anthropic, or open-source models) within data workflows; ability to apply LLMs efficiently and securely, with awareness of data privacy boundaries, prompt injection risks, and responsible AI usage in production environments
• Problem-Solving: Strong analytical and troubleshooting skills with attention to detail
• Communication: Ability to work effectively with both technical and business stakeholders
• Work Style: Comfortable with a hybrid work environment (2-3 days in office); highly autonomous and self-directed with a strong work ethic and growth mindset; exceptional attention to detail; able to take ownership of projects end-to-end with minimal oversight

What Would Be Nice

• Experience in the energy, utilities, or financial services industries
• Knowledge of energy trading concepts, market data, or asset management
• Familiarity with data governance frameworks and regulatory compliance (SOX, GDPR, CCPA)
• Experience with infrastructure as code (Terraform, CloudFormation)

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Hybrid

Supervisor Engineer (team lead), Software Support

At ASM, our Software Engineering teams works on delivering software that has immediate, tangible results visible in the operation of semiconductor processing equipment hardware. The hardware includes robotics, gas valves, temperature controllers and other hardware.  

As a Supervisor Engineer, Software Support, you will make an impact by investigating, recreating, and troubleshooting software issues to resolution as reported by our customers. 

Responsibilities:

• Oversee the day-to-day operations of the support team, including task assignment, workload distribution, and monitoring punctuality and backlog management.
• Act as the final point of contact for complex or high-priority customer escalations, ensuring timely and effective resolution.
• Provide coaching and professional development for staff, identifying training needs and creating individualized development plans.
• Gather information to investigate the issue, reproduce it, determine the root cause, and recommend corrective actions. 
• Guide your team members to create bug reports for the developer to use when fixing the bug. 
• Travel to customer sites to support installations, training, and troubleshooting of ASM products. 
• Talking to the account team and GPS group (not directly with the customer) when investigating reported issues. 

Minimum Qualifications 

• BS+ 8 years or MS+ 4 years in Computer Science, Computer Engineering, or a related field. 
• Proven ability to motivate, inspire, and foster a collaborative team culture.
• Strong troubleshooting skills in hardware and software, with familiarity data structure, networking, algorithm and modern operating systems (Windows).
• Software development or test (QA) experience. 
• Ability to travel 10-25% domestic and international.

Preferred Qualifications 

• Preferred expertise in C++, C#, Python, Gitlab\Github.  
• Experience with semiconductor equipment preferred 
• Experience working with two or more of the following is preferred: software for machine control, Semiconductor Factory Automation, Multi-threaded applications, real-time software, device drivers, or other interrupt-driven software 

We are seeking a skilled Engineer II, Electrical Engineering, to join our team, focusing on the design, development, and troubleshooting of electrical circuits for semiconductor tools. This role is pivotal in ensuring the safety and efficacy of our electrical systems, while collaborating with cross-functional teams to create cohesive tool architectures. 

Responsibilities: 

• Design, develop, test, and troubleshoot electrical circuits related to semiconductor tools 

• Ensuring safety is a priority in design and operation, utilizing safety-rated devices 

• Research and select components that meet tool requirements 

• Collaborate with cross-disciplinary teams to design unified tool architecture 

• Create schematic and cable designs 

• Adhere to the company's Engineering Change Order (ECO) process 

• Review documents meticulously, adapt to changes, handle tasks independently, and manage time effectively 

• Work closely with designers and drafters to generate detailed documentation 

• Understanding of pneumatics and PCB design is advantageous 

 Required Skills: 

• Bachelor’s degree in electrical engineering or related field 

• Proven experience in electrical circuit design and troubleshooting 

• Strong knowledge of safety standards and practices 

• Excellent verbal and written communication skills 

• Proficiency in technical writing 

• Familiarity with recognized safety and machinery standards such as NEC, NFPA 79, UL 508A, FM 4910, ISO 13849, EN/IEC 60204-1 & -33, SEMI specifications is a plus 

• Extensive Experience with AutoCAD (Cable Drawing and Schematic) 

• Experience in Design/Component selection 

Your Impact

Axon is committed to improving public safety by developing cutting-edge, innovative technologies. Known for developing the original TASER energy weapon, the Axon engineering team is tasked with continual excellence to keep the organization at the forefront of the market.

Mechanical Design Engineers at Axon have full design ownership over next generation life-saving technology from conceptualization through production, who's work is highly visible to even the most senior executives. our passionate leadership and cross-functional collaboration with product managers, electrical engineers, industrial designers, and manufacturing teams is vital to the success of the team and ensuring the safety of the general public for generations to come.

What You'll Do

Location: Scottsdale, AZ 

• Drive innovative product development from conceptualization to manufacturing
• Utilize creative problem solving skills to lead ideation of new product architectural concepts for subsystem and system level designs
• Construct and analyze high fidelity proof-of-concept prototypes
• Perform detailed mechanical analysis to ensure proper function through FEA, tolerance analysis, testing, and other exploratory means
• Collaborate regularly with both domestic and international stakeholders
• Work autonomously and collaboratively in an empowering and fast-paced environment
• Hone your engineering expertise in a dynamic learning environment focused on personal and professional development

What you bring

• Bachelor’s degree in Mechanical Engineering or equivalent experience
• L9: Minimum 12 years of product design experience in high-end consumer electronic products
• Experience providing technical leadership for teams of 2-5 mechanical engineers
• Proficiency with Creo or similar 3D CAD software
• Knowledge in the design of plastic injection molded, stamped metal, die-cast, and machined parts
• Familiarity with adhesives and bonded joint design
• Experience designing for a high level of dust/water ingress protection
• Experience designing thermal management solutions for dissipating heat from electronics
• Experience with PCB/PCBA flex circuit and other electro-mechanical integration
• Strong DFM/DFA skills, with emphasis on part/assembly tolerance management, to ensure robust designs for high volume manufacturing
• Experience collaborating with external consultants, vendors and manufacturers, including willingness to travel internationally
• Ability to interpret product requirements and translate into quantifiable engineering deliverables
• Experience preserving Industrial Design and UX intent in mechanical design implementation
• Effective communication and strong presentation skills
• Ability to balance and prioritize conflicting design constraints through analysis, testing, and creativity
• Collaboration with peers in a candid cross-functional team culture

Benefits that Benefit You

• Competitive salary, bonus, RSUs, and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• And yes, we have snacks in our offices

Benefits listed herein may vary depending on the nature of your employment and the location where you work

Your Impact

We are developing the next generation of mission-critical communications systems to builds mission-critical devices used by public-safety professionals worldwide. As a Staff Wireless Software Engineer, you will be a technical leader driving architecture and implementation of wireless protocol stacks, transport abstraction layers, and real-time communication systems across our devices. You will operate at the intersection of RF, embedded systems, and cloud-connected software.

This is a hands-on technical role with broad architectural influence.

Work Location: This role is eligible to be based out of Axon's US hubs in Atlanta, Boston, Scottsdale (HQ), San Francisco, or Seattle, and follows a hybrid schedule. We rely on in-person collaboration and ask that team members work onsite 4 days per week, Tuesdays through Fridays, with the flexibility to work remotely on Mondays, unless there is an approved workplace accommodation. We believe that connection fuels innovation, and our in-office culture is designed to foster meaningful teamwork, mentorship, and shared success.

Reports to: VP of Software Engineering
Direct Reports: 0

What You'll Do:

You will be tasked with solving the toughest wireless problems our products face: translating research into resilient, high-performance PHY/MAC systems; architecting firmware and toolchains that meet extreme latency, power, and reliability targets; and defining the wireless roadmap that balances innovation, manufacturability, and real-world performance. You will shape how our devices connect and perform at scale — from lab prototypes to deployed fleets — and your work will be judged by field performance under real conditions, not just simulations. This mission-critical wireless systems require both RF understanding and deep systems software expertise. This position sits at that boundary and defines the reliability and trust of the entire communications platform..

• Lead design and implementation of wireless communication stacks (LTE, 5G, Wi-Fi, sidelink, mesh, P2P, WiFi, Bluetooth, NFC....)
• Architect low-latency, high-reliability PTT and real-time voice transport systems
• Develop transport abstraction layers across multiple radios and networks
• Optimize performance (latency, jitter, packet loss, handover behavior)
• Collaborate with RF, hardware, and firmware teams to ensure end-to-end system performance
• Drive modem integration (e.g., Qualcomm, MediaTek) and carrier certification efforts
• Implement QoS, prioritization, and congestion control mechanisms
• Contribute to secure communication layers (encryption, key management, secure boot integration)
• Define metrics and instrumentation for wireless performance at scale
• Mentor engineers and set technical direction across projects

What You Bring

• 10+ years experience in wireless software development
• Strong C/C++ experience in embedded or systems environments
• Deep understanding of wireless protocols (LTE, 5G NR, Wi-Fi, Bluetooth, sidelink, or mesh)
• Experience working with modem vendors (e.g., Qualcomm SDKs)
• Experience with real-time systems and low-latency audio transport
• Strong networking fundamentals (TCP/IP, UDP, RTP, QUIC, QoS)
• Familiarity with RF performance constraints (RSSI, SINR, handovers, link budgets)
• Experience debugging packet-level and radio-layer issues

Additional preferable skills:

• Experience with mission-critical communications (LMR, MCPTT, public safety)
• Experience with 3GPP standards (Rel 16+)
• Experience with 5G sidelink (PC5) or device-to-device protocols
• Experience implementing mesh or MANET routing
• Knowledge of secure communications (AES, TLS, PKI, FIPS environments)
• Familiarity with Android/Linux device platforms
• Experience with satellite backhaul or hybrid transport systems

Benefits that Benefit You

• Competitive salary and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• Employee Resource Groups (ERGs)
• And yes, we have snacks in our offices

Benefits listed herein may vary depending on the nature of your employment and the location where you work.

Your Impact

Axon Records is a cloud-based records management system that modernizes how law enforcement agencies capture, manage, and access data. It streamlines report writing and approval workflows with structured data entry, real-time collaboration, and intelligent automation. Our product’s north star is to make an impact on the world by reducing the amount of time officers spend at their desks writing reports and increase the amount of time officers spend out in their communities helping the public.

You are a Staff Full Stack Software Engineer with experience building large-scale software applications. You have deep interest in backend technologies. You are also familiar with frontend and mobile technologies and challenges. You are excited about the care, feeding and growth of a scalable cloud-based systems and the engineering organizations that build them. You can instill new ideas into our engineering architecture and organization to help lead us into the next phase of scale and growth of our Records Management system.

Come work in an exciting environment where you use your passion, experience, and analytical skills to help bring new solutions to public safety and leave a positive impact on the world.

What You’ll Do

Work Location: This role is based out of our Boston Office and follows a hybrid schedule. We rely on in-person collaboration and ask that team members work onsite Tuesdays through Fridays, with the flexibility to work remotely on Mondays, unless there is an approved workplace accommodation. We believe that connection fuels innovation, and our in-office culture is designed to foster meaningful teamwork, mentorship, and shared success.
Reports to: Director, Software Engineering

• Lead engineering architecture design reviews
• Set a high technical bar for the team through code and architecture design reviews
• Mentoring engineers
• Working across teams with Product, Design, and Engineering to solve some of our biggest technical challenges within our stack for our customers
• Improve our Engineering process, including long-term thinking, sprint planning and stand-ups
• Building services that adhere to our high bar on availability and latency in this mission-critical space
• Working with the latest open source technologies

What You Bring

• 8+ years of experience in full stack software engineering
• A bachelor’s degree in Computer Science, Engineering, or a related technical field (or equivalent
• Experience building complex and impactful software in a team environment
• Experience designing and delivering high-availability, scalable cloud-based systems
• You write beautiful, simple, maintainable code for backend microservices
• Deep skill in driving technical solutions across multiple teams
• Backend service experience in managed languages such as Go, Java, Scala
• Frontend experience in Javascript + Typescript, React,
• Strong experience with database, especially SQL 
• Interest in helping to set the technical and organizational direction for a growing engineering team across multiple global locations

Benefits that Benefit You

• Competitive salary and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• Employee Resource Groups (ERGs)
• And yes, we have snacks in our offices

Benefits listed herein may vary depending on the nature of your employment and the location where you work.

Your Impact

Axon Records is a cloud-based records management system that modernizes how law enforcement agencies capture, manage, and access data. It streamlines report writing and approval workflows with structured data entry, real-time collaboration, and intelligent automation. Our product’s north star is to make an impact on the world by reducing the amount of time officers spend at their desks writing reports and increase the amount of time officers spend out in their communities helping the public.

You are a Staff Full Stack Software Engineer with experience building large-scale software applications. You have deep interest in backend technologies. You are also familiar with frontend and mobile technologies and challenges. You are excited about the care, feeding and growth of a scalable cloud-based systems and the engineering organizations that build them. You can instill new ideas into our engineering architecture and organization to help lead us into the next phase of scale and growth of our Records Management system.

Come work in an exciting environment where you use your passion, experience, and analytical skills to help bring new solutions to public safety and leave a positive impact on the world.

What You’ll Do

Work Location: This role is based out of our Seattle Office and follows a hybrid schedule. We rely on in-person collaboration and ask that team members work onsite Tuesdays through Fridays, with the flexibility to work remotely on Mondays, unless there is an approved workplace accommodation. We believe that connection fuels innovation, and our in-office culture is designed to foster meaningful teamwork, mentorship, and shared success.
Reports to: Director, Software Engineering

• Lead engineering architecture design reviews
• Set a high technical bar for the team through code and architecture design reviews
• Mentoring engineers
• Working across teams with Product, Design, and Engineering to solve some of our biggest technical challenges within our stack for our customers
• Improve our Engineering process, including long-term thinking, sprint planning and stand-ups
• Building services that adhere to our high bar on availability and latency in this mission-critical space
• Working with the latest open source technologies

What You Bring

• 8+ years of experience in full stack software engineering
• A bachelor’s degree in Computer Science, Engineering, or a related technical field (or equivalent
• Experience building complex and impactful software in a team environment
• Experience designing and delivering high-availability, scalable cloud-based systems
• You write beautiful, simple, maintainable code for backend microservices
• Deep skill in driving technical solutions across multiple teams
• Backend service experience in managed languages such as Go, Java, Scala
• Frontend experience in Javascript + Typescript, React,
• Strong experience with database, especially SQL 
• Interest in helping to set the technical and organizational direction for a growing engineering team across multiple global locations

Benefits that Benefit You

• Competitive salary and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• Employee Resource Groups (ERGs)
• And yes, we have snacks in our offices

Benefits listed herein may vary depending on the nature of your employment and the location where you work.

Job's mission

What you will be working on

What we are looking for

What sets you apart

Benefits:

• Health insurance (medical, dental, vision)
• 401(k)Retirement plan
• Paid time off (vacation, sick, flex, and holiday) & Parental Leave Benefit
• Life and disability insurance
• Employee assistance program (EAP), Family support, and parental consulting groups
• Healthcare Concierge
• Health Savings and Flexible Spending Accounts
• Lifestyle Spending Account / Fitness Reimbursement
• Fertility & Family Support Programs
• Wellness Program with medical premium discounts

As a Senior Software Engineer at ASM, you’ll sit at the intersection of cutting-edge software, complex hardware, and real-world customer impact. You’ll be a technical leader who solves the toughest software challenges in semiconductor manufacturing—driving system reliability, safety, and performance for our global customers. In this role, you won’t just fix issues—you’ll lead investigations, influence architecture, and deliver long-term, systemic improvements that power advanced semiconductor technology worldwide.

What You’ll Be Working On

• Lead deep technical investigations into software-related safety interlocks, validating corrective and preventive actions.
• Analyze and optimize multiple interacting subsystems, gaining end-to-end understanding of full platform workflows.
• Drive root cause and corrective action (RCCA) using packet captures, log correlation, and system-level analysis.
• Design and evaluate subsystem architectures, including multi-threading and scheduler interactions.
• Develop, test, deploy, maintain, and continuously improve software for advanced semiconductor manufacturing equipment.
• Troubleshoot complex software issues, including real-time control systems.
• Act as a technical escalation point—supporting field engineers and customers globally.
  Partner with QA and Support to reproduce field issues and strengthen regression coverage.
• Author and review system specifications, software designs, and test plans.
• Investigate internal and external technical inquiries, delivering clear analysis and actionable solutions.
• Evaluate and influence software engineering tools and system design decisions.
• Plan and coordinate rapid software fixes and deployments in high-impact environments.
• Present technical insights, progress, and outcomes in customer QBRs, including findings from complex DOE analyses.

What We’re Looking For

• Bachelor’s degree in Computer Science (or related field) with 7+ years of industry experience, or Master’s degree with 4+ years, or PhD with 3+ years of relevant experience
• Strong software development expertise in C++ and/or C#
• Solid understanding of multi-threaded applications
• Experience working with software documentation, specifications, and APIs
• Good knowledge of software memory architecture and debugging

What Sets You Apart

• Advanced degree (Master’s or PhD) and experience in software architecture and machine control systems, ideally within semiconductor equipment
• Hands-on experience with GUIs, device drivers, and interrupt-driven software
• Knowledge of data communications, networking, and EtherCAT
• Understanding of dynamic scheduling algorithms and deadlock avoidance
• Proficiency with development tools such as debuggers, application builders, and configuration management systems
• Ability to triage and diagnose mechanical, electrical, and software issues holistically
• Strong analytical skills, including designing and interpreting complex DOEs using multivariate methods or PCA

As a Principal Engineer, Global Product Management at ASM, you’ll have the opportunities to get involved in a wider scope of work compared to our larger competitors. While the workload is challenging, you are given the independence and autonomy to perform at your peak. This work requires being innovative, so you must have the ability to collaborate with others to deliver creative solutions, work well under pressure and pay great attention to small details.

This position is responsible for product management & technical marketing activities within the Product Management group. Every day is different, working with different customers and different products. This role is for someone who enjoys and is intellectually curious about the whole process and being part of it. You get to work external global customers that have many different needs and you will be part of the solution.  

Key Responsibilities:

• Product Life Cycle – Drive the product life cycle from concept to high volume manufacturing to obsolescence
• Roadmaps – Maintain product roadmap for a portfolio of products, periodically update roadmap through discussions with customers and internal experts, align product priorities and resources to roadmap
• Customer Engagement – Support Technical Meeting with customers, create and manage customer presentations, detailed market and competitive analysis
• MRS – Own the market requirement spec documents and ensure product development priorities align with MRS and customer needs
• Strategic Marketing – Prepare market strategies for executive R&D expenditure requests, develop roadmap and product strategy presentations for executives within ASM
• Financial – Work with finance department on NPV and IRR for products, maintain cost of ownership models
• Business Planning and Market Analysis – Attend company operation/planning meeting, create Business plan/Operation review materials, create business forecast based on market information, support budget planning, competitive analysis
• Drive teams internally to meet set products profit gross margins
• New Product Introductions – Detailed market analysis for inflections, development of business plans, internal executive alignment, positioning of products
• Support technical activities – Work with product development teams on specifications and data collection requirements, manage customer demo requests, prioritization of product development activities
• Supplier Engagement – Develop key capabilities for new products through collaboration with suppliers
• Product Promotion – Create promotional materials for conferences and launches, Sales and product support training, Introductions to Customer

Requirements:

• 10+ years of semiconductor / capital equipment industry experience, of which a significant portion has been in technical marketing and / or product management roles
• Masters or PhD in Material Science, Electrical/Chemical/Mechanical Engineering or equivalent
• Process, hardware, or device experience in semiconductors or capital equipment
• ALD or CVD experience is a plus
• High level of proficiency or deep understanding of capital equipment systems in semiconductor or similar industry
• Direct customer engagement or supplier management
• Ability to work with multiple internal disciplines on portfolio of products
• Understanding of product life cycle and technical marketing
• Ability to travel globally

Job Description

The Director, Site Reliability Engineering plays a critical role in ensuring the continuous and reliable operation of SmartRent services at the property level. This role drives system reliability, oversees property health, and partners closely with Engineering and Support teams to develop scalable processes and observability tools that sustain operational performance and deliver consistent client value.

Responsibilities

• Own property-level system reliability outcomes, including oversight of device-only networks and overall property health performance. 
• Drive adoption and effective utilization of SmartRent tools and services across properties through monitoring, insights, and continuous improvement efforts.
• Establish proactive detection and response frameworks to identify localized system issues and lead coordinated cross-functional resolution efforts. 
• Provide leadership oversight of property transfers and escalated issues, ensuring consistent resolution standards and service continuity. 
• Partner with Engineering leadership to design and implement observability tools and processes that enable scalable monitoring of system health and events.
• Define, document, and enforce standardized operational processes to ensure consistency, accountability, and cross-functional alignment. 
• Collaborate with Support leadership to develop dashboards and reporting capabilities that deliver actionable insights into property engagement, activity, and performance trends. 
• Lead the strategic oversight of IoT support operations, including installation support workflows and escalation management frameworks. 
• Oversee validation and controlled deployment of IoT firmware updates across hubs and connected devices to ensure reliability and minimize operational risk.
• Establish and maintain data integrity standards at the property level while contributing domain expertise to enterprise knowledge resources and training materials.

Required Qualifications

• Demonstrated experience in network operations, including both wired and wireless environments. 
• Experience utilizing observability and monitoring tools (e.g., Datadog, Observe, or similar platforms). 
• Strong troubleshooting expertise, including developing and maintaining runbooks and technical documentation. 
• Foundational programming, scripting, and automation skills; ability to leverage automation to improve operational efficiency is required. 
• Working knowledge of cloud-based infrastructure, such as AWS or comparable platforms. 
• Significant operational experience with a proven ability to design, implement, and sustain clear, scalable processes that teams consistently follow.
• Strong cross-functional collaboration skills, with experience working across internal teams to resolve complex operational issues and achieve shared goals.

Preferred Qualifications

• Demonstrated business acumen, including the ability to connect reliability and operational efforts to measurable business and customer value.
• Experience translating technical reliability outcomes into clear customer-facing or executive-level value narratives.

** This position is not eligible for visa sponsorship. Candidates cannot require sponsorship now or in the future**

We are seeking a highly skilled Senior Mechanical Engineer with 5+ years of professional experience and a Bachelor’s degree in Mechanical Engineering to lead the design, development, and evaluation of advanced mechanical and electromechanical systems.

Key Responsibilities

• - Design complex mechanical and electromechanical subsystems and systems.
• - Develop detailed manufacturing and testing specifications and methods.
• - Evaluate mechanical systems and products using engineering principles.
• - Confirm system and product capabilities through feasibility studies and testing.
• - Drive product development by reviewing requirements and researching materials.
• - Ensure system and product quality through testing and validation.
• - Provide engineering guidance and mentor junior personnel.
• - Maintain compliance with government and industry regulations.
• - Maintain technical documentation and system data.
• - Support cross-functional engineering initiatives.

Required Skills & Qualifications

• - Strong capabilities in requirements analysis, design skills, conceptual skills, and presenting technical information.
• - Experience in Fluid Systems and Wet environments
• - Knowledge of Complex motor drive system
• - Stress Analysis of large Frame
• and other sub-systems
• - Demonstrated quality focus, technical depth, and job knowledge.
• - Bachelor’s degree in Mechanical Engineering.
• - Minimum 5 years of mechanical engineering experience.
• - Proficiency with Siemens NX, Team Center, AutoCAD, SolidWorks, and PDM systems.
• - Excellent communication and collaboration skills.
• - Strong attention to detail and analytical thinking.
• - Proven ability to work under strict deadlines.

Knowledge of Chemical Mechanical Planarization Tool would be beneficial.

** This position is not eligible for visa sponsorship. Candidates cannot require sponsorship now or in the future**

We are seeking a highly skilled Senior Mechanical Engineer with 10+ years of professional experience and a Bachelor’s degree in Mechanical Engineering to lead the design, development, and evaluation of advanced mechanical and electromechanical systems.

Key Responsibilities

• - Design complex mechanical and electromechanical subsystems and systems.
• - Develop detailed manufacturing and testing specifications and methods.
• - Evaluate mechanical systems and products using engineering principles.
• - Confirm system and product capabilities through feasibility studies and testing.
• - Drive product development by reviewing requirements and researching materials.
• - Ensure system and product quality through testing and validation.
• - Provide engineering guidance and mentor junior personnel.
• - Maintain compliance with government and industry regulations.
• - Maintain technical documentation and system data.
• - Support cross-functional engineering initiatives.

Required Skills & Qualifications

• - Strong capabilities in requirements analysis, design skills, conceptual skills, and presenting technical information.
• - Experience in Fluid Systems and Wet environments
• - Knowledge of Complex motor drive system
• - Stress Analysis of large Frame
• and other sub-systems
• - Demonstrated quality focus, technical depth, and job knowledge.
• - Bachelor’s degree in Mechanical Engineering.
• - Minimum 10 years of mechanical engineering experience.
• - Proficiency with Siemens NX, Team Center, AutoCAD, SolidWorks, and PDM systems.
• - Excellent communication and collaboration skills.
• - Strong attention to detail and analytical thinking.
• - Proven ability to work under strict deadlines.

Knowledge of Chemical Mechanical Planarization Tool would be beneficial.

What The Role Is

The O&M Cost Strategy Associate supports the development, analysis, and continuous improvement of Operations & Maintenance (O&M) cost models across Clearway’s renewable energy portfolio. This role focuses on building and maintaining data-driven cost insights, supporting forecasting activities, benchmarking O&M spend, and assisting cross-functional teams in evaluating operational performance and future cost trends.

The ideal candidate has a solid foundation in renewable energy operations or power generation, hands-on experience with financial or operational modeling, and knows how to communicate technical findings across a range of audiences — from engineering and procurement to finance and business development. A solid foundation in renewable energy or power generation and fluency with tools like Power BI are key. Familiarity with AI-assisted workflows is a plus.

If you're motivated by the energy transition and want a role where your analytical work directly supports one of the largest clean energy portfolios in the country, we'd love to hear from you.

*This job posting is open to Scottsdale, San Diego, Houston, Denver, and San Francisco offices*

If you don’t meet 100% of the qualifications but see yourself contributing, please submit your resume

What You'll Be Doing

• Develop and maintain bottom-up cost estimating models for wind, solar, and storage assets across all project phases (greenfield, operating, repower, and M&A).
• Use statistical and forecasting tools to model maintenance spend and equipment risk profiles.
• Collaborate with internal stakeholders (O&M, engineering, procurement, FP&A) to validate O&M cost assumptions.
• Support internal teams (business development, procurement, O&M, capital market, etc.) with data requests, cost breakdowns, and scenario analysis.
• Assist in preparing cost assumptions for annual budgeting and long-range planning processes.
• Analyze historical O&M costs to identify trends, cost drivers, and opportunities for efficiency.
• Develop and enhance Power BI dashboards to connect multiple data streams and visualize key model inputs and outputs.
• Use AI tools to automate routine data processing tasks and extracting key commercial data from contracts

What You'll Bring

• Bachelor’s degree in Engineering, Business, Finance, or other applicable fields.
• 4+ years of experience in renewable energy, power generation, or infrastructure.
• Understanding of renewable energy plant operations (solar, wind, or BESS).
• Demonstrated experience in operations support role in development of creative solutions to operating challenges.
• Excellent communication and stakeholder management skills across technical, legal, and financial disciplines.
• Strong analytical and project management capabilities; attention to detail and risk awareness.

What Would Be Nice

• Familiarity with lifecycle cost analysis and predictive maintenance modeling.
• Experience working with large datasets or forecasting tools.
• Familiarity with renewable project finance and typical counterparty and Independent Engineer requirements
• Advanced Microsoft Excel, Word and PowerPoint skills. Proficiency in data analytics tools (Power BI, Tableau, SQL, or Python).

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Hybrid

What The Role Is

The Operations Specialist II will play a key role in assisting the Operations Manager and Operations Engineer by assuring the highest level of safety, reliability and environmental standards while optimizing asset production and profitability. The Operations Specialist II will be responsible for supporting all day-to-day real-time Reporting, Performance, and Monitoring Center (RPMC) activities acting as the on-shift Operations Specialist for all assets under the CEG 12 GW portfolio including Wind, Solar and Battery Storage. This position requires working 12.5 hour rotating shifts, including nights, weekends, and holidays, to ensure continuous operations and monitoring of the CEG utility fleet.

This position is a full-time, on-site position in our operations center based in Scottsdale, Arizona.

If you don’t meet 100% of the below qualifications but see yourself contributing, please submit your resume.

What You'll Be Doing

• Proactively monitor and evaluate real-time activities, performance, and operational status of Clearway Energy Utility Operating Assets to determine root cause and maintain utmost data integrity for operational events
• Operator will also be expected to understand and proactively identify abnormal operating and alarm conditions that arise during the shift and react accordingly
• Ability to manage power plant operations considering different requirements for each plant based on location, generation type, interconnect requirements, regional regulations and customer contractual requirements in a high stress and time sensitive environment.
• Answer phones and emails during shift
• Coordinate, document, and implement all necessary remedial actions to maximize the availability of the equipment and production/revenue according to pricing, resources, forecasts, and maintenance procedures.
• Interpret and execute activities associated with asset contracts (PPA’s, LGIA’s, O&M agreements) including capacity scheduling/reporting, telemetry issues, or remote-control capability impacts
• Operate multiple power plants IAW regulatory operating requirements (i.e.  CPUC/WECC/Prudent Utility Practices)
• Coordinate with the Field Operations teams, including Site Managers, Supervisors, and technicians in daily activities for plant status verifications, downtime reporting, and safe actions of remote equipment
• Coordinate with external entities such as Scheduling Coordinators, Transmission Operators, and Reliability Entities for the performance of status notifications or Operating Instructions
• Support the commissioning of projects by coordinating test energy scheduling and power plant operations activities ensuring safety, regulatory, environmental, and operating compliance Maintain confidentiality and sensitivity with respect to all functions of DEI

What You'll Bring

• Ability to coordinate multiple activities and ensure safety, quality, and schedule adherence.
• Minimum of two (2) years’ experience in operations is required; three to four (3–4) years preferred. Experience in a Solar, Wind, or BESS Field Technician role may be considered toward this requirement.
• Able to demonstrate competent technical knowledge of plant and system processes and experience in operating electrical and SCADA systems.
• Ability to take direction, identify problems, develop solutions, conduct analysis independently and in collaboration with others
• Ability to work in difficult customer situations and show strong verbal and written communication skills.
• Ability to work in a high-stress environment where decisions directly impact personnel safety and equipment reliability
• Ability to work rotating shifts of 12.5 hours, including nights, weekends, and holidays
• Available for 24-hour on-call duty to meet customer requirements
• GED or High School Diploma
• Must possess a current NERC Reliability Coordinator (RC) certification, or have the ability to obtain certification within six (6) months of start date
• If you don’t meet 100% of the above qualifications but see yourself contributing, please submit your resume.

What Would Be Nice

• Bachelor's degree or formal operations apprenticeship training or equivalent preferred.
• Possess knowledge of functional systems interactions
• Attention to critical elements in a complex and regulated environment.

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

Job Summary: 
At LG Energy Solution Arizona, Inc., the Engineer II – Cell Quality Assurance will play a key role in improving manufacturing methods and procedures within the battery electrode production process to ensure products meet company quality specifications. Working closely with production, engineering, and quality teams, this role evaluates manufacturing processes, analyzes quality data, and implements improvements to strengthen product reliability and process consistency. The Engineer II applies quality tools such as PPAP, PFMEA, SPC, Gage R&R, calibration systems, and corrective and preventive actions to address production issues and support continuous quality improvement. Through cross-functional collaboration and data-driven analysis, this role helps ensure battery cell components meet established standards for quality, reliability, and performance.

Report To: 
Sr. Manager, Cell Quality Assurance 

Responsibilities:
• Develop and document inspection Standard Operating Procedures (SOPs) to ensure inspection reliability and verify applicability within inspection and testing processes.
• Analyze production process conditions and manufacturing data to identify root causes of electrode nonconformance, including field quality issues, and implement corrective actions in collaboration with cross-functional teams.
• Conduct analysis of nonconforming electrode samples, document investigation results, report findings to headquarters, and implement corrective actions to prevent recurrence.
• Utilize analytical and statistical methods, including Statistical Process Control (SPC), to monitor electrode manufacturing quality, identify potential risk factors, and implement preventive quality measures.
• Perform surveillance audits of electrode production processes to verify compliance with quality standards, procedures, and operational requirements.
• Review and approve PPAP documentation and 4M process changes related to electrode manufacturing to ensure quality requirements are maintained.
• Perform cell validation testing, including performance, safety, and reliability evaluations, to confirm product quality and manufacturing process stability.
• Maintain worksite organization and cleanliness in accordance with 5S3R standards (Sort, Set in Order, Shine, Standardize, Sustain; Right Location, Right Quantity, Right Container) to support safe and efficient electrode inspection and testing operations.

Qualifications:
• Bachelor’s degree in Engineering required (Chemical, Electrical, Mechanical, Industrial, or Manufacturing Engineering preferred).
• 3+ years of experience in Quality Engineering or Manufacturing Engineering within an automotive or high-volume manufacturing environment, including internship or co-op experience.
• Experience supporting high-volume production environments, including development and implementation of Control Plans, PFMEA, and process controls.
• Knowledge of quality methodologies and problem-solving tools, including Minitab, Six Sigma, and 8D problem-solving methods.
• Experience using Microsoft Office and Minitab for data analysis and reporting.
• Knowledge of electrochemistry and lithium-ion battery cell materials (e.g., cathode, anode, separator) preferred.
• Experience performing cell validation testing, including performance, safety, and reliability testing.

Skills:
• Knowledge of APQP, inspection equipment and techniques, and root cause failure analysis methodologies.
• Familiarity with capability studies, statistical analysis, and manufacturing process evaluation.
• Understanding of PFMEA, Control Plans, PPAP, 8D/5-Why problem solving, and fault tree analysis (FTA).
• Knowledge of SOPs, Control Plans, CTQs, and parameters used for conducting process audits.
• Strong data analysis and reporting capabilities, including the ability to prepare technical reports and summarize quality findings.
• Excellent written and verbal communication skills with the ability to collaborate across production, engineering, and quality teams.
• Demonstrated teamwork and effectiveness in achieving organizational goals.

Job Summary: 

At LG Energy Solution Arizona Inc., the Engineer II, Environmental & Sustainability will play a key role in supporting environmental and sustainability initiatives by identifying, evaluating, and controlling workplace and environmental risks. This role ensures compliance with local, state, and federal regulations, while supporting the implementation of company EHS standards and programs. Acting as a technical resource to cross-functional teams, the engineer conducts audits, inspections, and incident investigations, and supports the development of sustainable practices to improve environmental performance and maintain regulatory compliance.

Responsibilities:

• Perform company permit application and renewal activities, including but not limited to air, waste, stormwater, and wastewater permits, as well as required environmental reporting.
• Manage and drive continuous improvement of environmental programs, including wastewater, hazardous waste, air emissions, and stormwater compliance.
• Support and drive the ISO 14001 certification process, identifying areas for continuous improvement across environmental programs to maintain ISO 14001 standards.
• Collaborate with internal teams and external consultants to ensure permit applications and submissions are accurate and completed on time.
• Deploy and manage environmental initiatives to continuously improve the performance of environmental programs and processes.
• Ensure all permits and reports comply with company standards and applicable federal, state, and local environmental regulations.
• Serve as a point of contact and correspond with federal, state, and local regulatory agencies as required.
• Provide environmental review and support for site projects, including participation in management of change (MOC) processes.
• Lead and participate in routine audits to support continuous improvement.
• Maintain workplace cleanliness in accordance with 5S3R standards (5S: Sort, Set in Order, Shine, Standardize, Sustain; 3R: Right Location, Right Quantity, Right Container).
• Perform other duties as assigned.

Qualifications:

• Bachelor’s degree in Engineering, Environmental Science, or a related field.
• 3+ years of experience in environmental reporting, regulatory compliance, or a related function within a manufacturing environment.
• Experience with environmental permits and reporting, including air, wastewater, stormwater, and hazardous waste.
• Knowledge of local, state, and federal environmental regulations and compliance requirements.
• Experience supporting or participating in ISO 14001 environmental management systems.
• Ability to work effectively in a cross-functional, team-oriented environment.

Skills:

• Proficiency in Microsoft Office Suite (Excel, Word, Outlook).
• Strong analytical and problem-solving skills.
• Ability to work independently with minimal supervision and manage multiple priorities.
• Strong written and verbal communication skills, including interaction with internal teams and regulatory agencies.
• Ability to prioritize tasks and meet deadlines in a fast-paced environment.
• Knowledge of advanced manufacturing processes and technologies, including automation, chemicals, and electrical systems.

Job Summary: At LG Energy Solution Arizona, Inc., the Engineer II – IT MES Process Innovation will play a key role in advancing smart manufacturing initiatives by supporting and improving Production IT systems, including the Manufacturing Execution System (MES), data analysis platforms, and reporting tools. This role partners with production, engineering, and IT teams to analyze manufacturing processes, implement system enhancements, and support IT solutions aligned with user requirements and business and process changes, driving continuous improvement and operational efficiency across manufacturing operations.

Report To: Sr. Manager, Process Innovation

Responsibilities:
• Analyze manufacturing processes and identify opportunities for system enhancements within Production IT systems, including the MES.
• Design, configure, and implement MES and production system improvements to enhance manufacturing efficiency, system performance, and operational visibility.
• Collaborate with production, engineering, and IT teams to develop and deploy technology solutions that optimize manufacturing processes and support evolving operational requirements.
• Troubleshoot system issues impacting production operations and Smart Factory systems, performing root cause analysis and implementing corrective actions to maintain system reliability.
• Monitor and optimize system integration and data flow across MES, WMS, and ERP platforms to improve data consistency, inventory accuracy, and system performance.
• Execute IT initiatives and system enhancement projects that support digital manufacturing and smart factory capabilities.
• Partner with global engineering teams and headquarters stakeholders to align system capabilities with manufacturing process improvements and business requirements.
• Coordinate with internal teams and external technology vendors to implement and maintain IT equipment, software solutions, and system configurations supporting manufacturing operations.

Qualifications:
• Bachelor's Degree in Computer Science, Information Technology, Industrial Engineering or a related field.
• 3+ years of experience in Information Technology, Manufacturing Systems, or related technical environments.
• Experience supporting or implementing Manufacturing Execution Systems (MES) and ERP systems (e.g., SAP) in a manufacturing environment.
• Experience working on data analysis initiatives and production system improvement projects.
• Understanding of manufacturing processes and production systems and their integration with IT solutions.
• Knowledge of IT best practices, including system architecture, programming concepts, and cybersecurity principles.
• Ability to work flexible hours when required to support production operations and collaborate with global teams and headquarters stakeholders.

Skills:
• Strong communication and cross-functional collaboration skills.
• Experience working with data analysis and reporting tools to support operational decision-making.
• Familiarity with project management tools and methodologies.
• Programming and data visualization experience with tools such as Python, SQL, and Power BI preferred.
• Knowledge of AI or advanced analytics solutions preferred.
• Proficiency in Microsoft Office Suite.

Job Summary: 

The Inspection Technology Engineer I supports the implementation, validation, and continuous improvement of automated inspection systems used in cylindrical lithium-ion battery cell manufacturing. This role focuses on ensuring inspection systems operate reliably, detect defects accurately, and support safe, high-volume production for EV battery applications.

The role is hands-on and highly collaborative, working closely with Production, Quality Assurance, Equipment Engineering, and EHS teams in a fast-paced environment. The engineer will gain exposure to vision systems, X-ray inspection, metrology, and automated electrical test systems across electrode, assembly, and formation processes.

Responsibilities:

Support inspection, manufacturing, or automation processes on the production floor.

Assist with setup, validation, and optimization of inspection and production equipment.

Analyze basic process and inspection data to support yield and quality improvements.

Support troubleshooting of equipment and process-related issues under guidance.

Participate in new model introductions and process change activities.

Follow SOPs, work instructions, and engineering standards.

Collaborate with technicians, engineers, and cross-functional teams.

Support documentation, reporting, and continuous improvement activities.

Qualifications:

Bachelor’s degree in Engineering (Mechanical, Electrical, Industrial, Manufacturing, or related field).

1+ years of experience in a manufacturing or industrial environment (internship or co-op acceptable).

Basic understanding of manufacturing processes and quality concepts.

Fundamental understanding of automated equipment or inspection systems.

Knowledge of machine vision algorithm libraries (Halcon, OpenCV) and deep learning models.

Exposure to maintenance of in-line inspection systems (Machine Vision, 3D metrology, X-ray and CT).

Understanding of measurement system analysis (MSA) and gage R&R using Minitab.

Skills:

Basic data analysis skills.

Problem-solving mindset with willingness to learn.

Strong communication and teamwork skills.

Ability to follow procedures and engineering standards.

Basic technical documentation skills.

Job Summary: 

As a Production Engineer II, the applicant will identify production line priorities and address abnormalities with the goal of meeting customer delivery targets of cylindrical batteries. This role requires skilled data analysis and the ability to communicate with multiple teams and operators to develop and implement solutions.

Responsibilities:

• Perform engineering activities measuring success through Key Performance Indicators (KPIs)
  of S (Safety), Q (Quality), C (Cost), D (Delivery)
  Report SQCD status and improvement plan regularly (weekly / monthly) 
• Address quality reports and events promptly to minimize possible impacts
  Track production record, identify highest fallout, and report/address causes
  (Send out quality alerts and report to team leader, finish with nonconformance (NCR) report)
• Develop short/mid/long-term improvement projects to address recurring quality issues
• Communicate with team and other departments to review activities
  Collaborate with other team members and departments to solve problems
• Identify production line priorities, abnormalities (down time, equipment issues), and any range of risk to product
• Communicate with local and international vendors and purchasing department to facilitate equipment installation, repairs and replacements
• Update standard documents after minor or critical SQCD issues for preventing recurrence
  All of improvement plans (Lessons Learned) have to be recorded in standard documents
  (e.g. Control plan, Work Standard, Breakdown Maintenance (BM)/Process Down (PD)/Preventive Maintenance (PM) Guide, Operating Manual, etc.)
• Teach and mentor other engineers, delegating tasks when appropriate
  (Train production team members on new equipment or procedures)
• Maintain cleanliness at work-site in accordance with 5S3R Standards 
• 5S: Sort, Set in order, Shine, Standardize, Sustain
• 3R: Right Location, Right Quantity, Right Container
• Ensure work is completed in a safe manner and maintain a safe work environment
• Perform other duties as assigned

Qualifications:

• Bachelor’s degree in Chemical Engineering, Mechanical Engineering, Manufacturing Engineering, or a related field.
• 3+ years of experience in a manufacturing, production, or plant environment (internships and co-ops included)
• Able to properly and regularly utilize the Personal Protective Equipment (PPE) for a period of up to 12 hours
• Must be able to perform the following over the course of up to 12 hours per day
  • Lift/push/pull up to 35 pounds on occasion
  • Stoop, twist, bend
  • Reach overhead
  • Sit and/or stand for lengthy periods
• Willingness to work in a fast-paced, hands-on environment as a member of a collaborative, cross-functional team. 

Desired Skills:

• Background in process engineering.
• Experience in large batching of chemicals.
• Strong communication and teamwork skills.
• Proficiency in Microsoft Office (Excel, Word, PowerPoint); experience with CAD or production management systems is a plus.
• Strong problem-solving skills and hands-on aptitude in a production setting.
• Familiarity with lean manufacturing tools and concepts (e.g., 5S, Kaizen, Value Stream Mapping) is a plus.
• Ability to analyze data and present findings clearly and concisely. Experienced with JMP, Minitab is a plus

Job Summary: 

The Production Engineer I will support daily manufacturing operations by optimizing production processes, improving quality and efficiency, and driving continuous improvement initiatives. This role is ideal for candidates with 1–3 years of engineering experience in a plant or production environment who are eager to apply engineering principles to real-world manufacturing challenges. The Production Engineer will collaborate with cross-functional teams to ensure production goals are met safely, cost-effectively and on schedule.

Responsibilities:

•    Monitor and analyze production line performance to identify opportunities for improvement in throughput, efficiency, and quality.
•    Conduct or assist with root cause analysis and implement corrective actions
•    Support the introduction of new products or equipment into the production line, including trials and validation.
•    Develop and maintain standard operating procedures (SOPs), work instructions, and process documentation.
•    Participate in lean manufacturing initiatives and support kaizen events to drive continuous improvement.
•    Collaborate with maintenance, quality, and safety teams to ensure smooth and safe production operations.
•    Gather and analyze production data to support decision-making and report key performance indicators (KPIs).
•    Support training efforts for operators and technicians on new processes or equipment.
•    Ensure compliance with company policies, safety standards, and regulatory requirements.

Qualifications:

• Bachelor’s degree in Mechanical Engineering, Chemical Engineering, Manufacturing Engineering, or a related field.
• 1–3 years of experience in a manufacturing, production, or plant environment (internships and co-ops included).
• Strong problem-solving skills and hands-on aptitude in a production setting.
• Familiarity with lean manufacturing tools and concepts (e.g., 5S, Kaizen, Value Stream Mapping) is a plus.
• Ability to analyze data and present findings clearly and concisely. Experienced with JMP, Minitab is a plus
• Strong communication and teamwork skills.
• Proficiency in Microsoft Office (Excel, Word, PowerPoint); experience with CAD or production management systems is a plus.
• Able to properly and regularly utilize the Personal Protective Equipment (PPE) for a period of up to 12 hours
• Must be able to perform the following over the course of up to 12 hours per day
  • Lift/push/pull up to 35 pounds on occasion.
  • Stoop, twist, bend
  • Reach overhead
  • Sit and/or stand for lengthy periods
  • Willingness to work in a fast-paced and hands-on environment.

Skills:

• Microsoft Office Suite
• Production processes
• Data analysis and processing
• Six Sigma certification * Preferred but not required
• DOE (Design of experiments) * Preferred but not required
• CAD (Computer-aided design) and coding * Preferred but not required

Job Summary: 

The Production Engineer will support daily manufacturing operations by optimizing
production processes, improving quality and efficiency, and driving continuous
improvement initiatives. This entry level role is ideal for candidates with limited
engineering experience in a plant or production environment who are eager to apply
engineering principles to real-world manufacturing challenges. The Production Engineer
will collaborate with cross-functional teams to ensure production goals are met safely,
cost-effectively, and on schedule.

Responsibilities:

• Support the monitoring and analyzing of production line performance to identify
  opportunities for improvement in throughput, efficiency, and quality.
• Conduct or assist with root cause analysis and implement corrective action.
• Support the introduction of new products or equipment into the production line,
  including trials and validation.
• Develop and maintain standard operating procedures (SOPs), work instructions,
  and process documentation.
• Participate in lean manufacturing initiatives and support kaizen events to drive
  continuous improvement.
• Collaborate with maintenance, quality, and safety teams to ensure smooth and
  safe production operations.
• Gather and analyze production data to support decision-making and report key
  performance indicators (KPIs).
• Support training efforts for operators and technicians on new processes or
  equipment.
• Ensure compliance with company policies, safety standards, and regulatory
  requirements.

Qualifications:

• Bachelor’s degree in Engineering, or a related field.
• 0-2 years of experience in a manufacturing, production, or plant environment
  (internships and co-ops included).
• Strong problem-solving skills and hands-on aptitude in a production setting.
• Familiarity with lean manufacturing tools and concepts (e.g., 5S, Kaizen, Value
  Stream Mapping) is a plus.
• Able to properly and regularly utilize the Personal Protective Equipment (PPE) for
  a period of up to 12 hours
• Must be able to perform the following over the course of up to 12 hours per day
  • Lift/push/pull up to 35 pounds on occasion
  • Stoop, twist, bend
  • Reach overhead
  • Sit and/or stand for lengthy periods
• Willingness to work in a fast-paced and hands-on environment.

Skills:

• Ability to analyze data and present findings clearly and concisely. Experienced
  with JMP, Minitab is a plus
• Strong communication and teamwork skills.
• Proficiency in Microsoft Office (Excel, Word, PowerPoint); experience with CAD
  or production management systems is a plus.