** This position is not eligible for visa sponsorship for external candidates. Candidates cannot require sponsorship now or in the future**

Job’s mission

Our Global Sales, Services & Spares IQ and Sustaining teams are seeking Snr Engineers I & II, Field Service (level will depend on experience, degree and responsibilities. Please review below) to join ASM at a customer site (TSMC) in North Valley, AZ. Domestic and International travel of at least 75% will be required for this role. As a Senior Field Service Engineer at ASM, you’ll play a critical role in supporting the advanced semiconductor equipment that powers the world’s most transformative technologies. You’ll take the lead on complex troubleshooting, guide and mentor engineers, and strengthen our partnerships by helping customers achieve stable, high‑performance fabrication environments. Your expertise will make a direct impact on tool reliability, customer satisfaction, and the next generation of ASM technology.

What you will be working on

Senior Engineer I, Field Service

• Install, maintain, and repair ASM semiconductor equipment with minimal supervision
  • Lead troubleshooting of complex tool or process issues using structured diagnostic methods
  • Perform root‑cause analysis and recommend targeted, data‑driven corrective actions
  • Review tool‑performance data to identify trends, risks, or improvement opportunities
  • Provide technical guidance and on‑the‑job coaching to less‑experienced engineers
  • Document service activities and support updates to procedures and best practices
  • Communicate solutions, progress, and expectations clearly with customer engineers
  • Participate in escalations alongside cross‑functional ASM engineering teams

Senior Engineer II, Field Service

• Serve as the senior technical lead for equipment installation, performance optimization, and recovery
• Diagnose and resolve highly complex, multi‑factor tool and process issues with limited guidance
• Lead advanced root‑cause analysis and drive long‑term corrective‑action plans that influence global engineering improvements
•  Own the customer‑technical relationship: build trust, anticipate operational needs, and act as ASM’s senior technical representative onsite
• Manage escalations end‑to‑end, aligning expectations, coordinating cross‑functional teams, and communicating clear action plans
• Guide, mentor, and develop engineers through hands‑on instruction, structured training, and knowledge‑sharing
• Champion best practices and contribute to procedure development, improvements, and field‑wide learning
•  Provide detailed field insights to R&D, product, and design teams, including support for beta tools or early‑option deployments

What we are looking for

Senior Engineer I, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 6+ years of experience, OR a Master’s degree with 4+ years of experience OR PhD degree with 0+ years of experience.
• Experience of semiconductor field service or capital‑equipment experience
• Ability to interpret electronic and electromechanical schematics
•  Experience with structured troubleshooting methodologies
• Knowledge of cleanroom and semiconductor safety protocols
• Strong written and verbal communication skills
• Ability to work independently and collaboratively in fast‑paced fab environments
• Willingness to travel domestically and internationally as needed for the role. 
• Proficiency in MS Office

Senior Engineer II, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 8+ years of experience, OR a Master’s degree with 6+ years of experience OR PhD degree with 4+ years of experience.
• Experience in semiconductor field service experience with demonstrated technical leadership
• Advanced knowledge of tool architecture, control algorithms, and multi‑factor troubleshooting
• Experience driving structured root‑cause analysis and long‑term corrective‑action plans
• Proven ability to lead escalations and manage customer‑technical relationships
• Strong communication and mentorship capabilities
• Ability to work autonomously while guiding and developing other engineers
• Willingness to travel domestically and internationally as needed for the role
• Proficiency in MS Office

What sets you apart

Senior Engineer I, Field Service

• Experience supporting beta tools or early‑option equipment
• Knowledge of wafer‑fab operations, robotics, vacuum systems, plasma, RF, or gas handling
• Experience writing or updating procedures or technical documentation
• Strong customer‑service approach and organizational skills
• Familiarity with structured problem‑solving methods

Senior Engineer II, Field Service

• Demonstrated leadership in complex troubleshooting programs or technical initiatives
• Experience owning customer‑technical relationships, including expectations and long‑term partnership building
• Strong capability in mentoring and developing field engineers
• Hands‑on expertise with fab robotics, vacuum systems, plasma, RF, or gas‑delivery systems
• Experience providing structured feedback to engineering or product teams
• Experience evaluating or supporting beta‑stage or early‑option tools

** This position is not eligible for visa sponsorship for external candidates. Candidates cannot require sponsorship now or in the future**

As a Field Service Engineer – Early Career, you’ll take on a hands-on role supporting ASM’s advanced semiconductor equipment and helping our customers keep their fabs running at peak performance. You’ll build real-world expertise through structured training, mentorship, and on-the-job learning while working directly with technologies that power AI, 5G, cloud computing, and next‑generation devices. This is your chance to apply your engineering background, strengthen your technical capabilities, and join a team that’s shaping the future of semiconductor innovation.

In this role, based in North-Valley/Phoenix, AZ at our customer site, you’ll launch your engineering career at the center of cutting‑edge semiconductor manufacturing. It’s an ideal opportunity for early‑career engineers who want to put their education into practice in a high‑tech environment where every day brings something new to learn.

From your first day, you’ll receive training through hands‑on guidance from seasoned engineers onsite. You’ll work with vacuum systems, plasma, chemical delivery, robotics, sensors, advanced metrology, and complex hardware‑software interactions. Your contributions will have a direct impact on tool performance, system uptime, and customer success—playing a meaningful role in enabling leading‑edge logic technology nodes. This experience lays a strong foundation for rapid growth, technical mastery, and a variety of long‑term career paths within ASM.

Shifts available:

Mon-Fri- 8am-5pm (subjected to OT)

What You Will Be Working On 

• Support installation, maintenance, and repair of ASM semiconductor equipment at customer sites 
• Troubleshoot equipment and process issues with guidance from senior engineers 
• Deliver clear, timely, customer‑focused support with a strong safety mindset 
• Working in cleanroom environments while following strict safety and quality standards.
• Assist in identifying and contributing to continuous improvement efforts  
• Participate in customer escalations alongside experienced team members 

What We Are Looking For 

• Bachelor’s or master’s degree in Electromechanical Engineering, Electrical Engineering, Mechanical Engineering, or related field 
• Candidates who are hands-on and mechanically curious, energized by complex systems and real-world problem solving, Comfortable working in fast paced, hightech environments & motivated to build a long-term engineering career. 
• Internship, co‑op, senior design project, lab research, or hands‑on technical experience 
• Ability to read and interpret basic electronic and electromechanical schematics 
• Understanding of safety protocols and willingness to work in cleanroom environments 
• Strong problem‑solving mindset and eagerness to learn 
• Clear communication skills and a strong customer-service mindset 
• Ability to work independently and collaboratively 
• Willingness to travel domestically and internationally 
• Proficiency with Microsoft Office 

What Sets You Apart 

• Demonstrated commitment to safety, quality, and disciplined execution 
• Exposure to semiconductor processes, wafer fabs, robotics, vacuum systems, plasma, or gas handling 
• Experience writing technical documentation in school or project settings 
• Familiarity with customer‑facing or support roles (internships, tutoring, help desk, teamwork) 
• Interest in structured problem‑solving methods, statistical methods, data analysis. 
• Curiosity and learning orientation when working with advanced semiconductor technologies 
• Participation in engineering clubs, competitions, or technical student groups 

Why join ASM? 

2026 is the year to join ASM as a Field Service Engineer. Apply now! 

Job's Mission:

As a Software Quality Assurance Engineer at ASM, you will ensure the reliability and effectiveness of our software that drives cutting-edge semiconductor processing equipment. You’ll work on testing and qualifying software, streamlining QA processes to align with CI/CD development, and collaborating with talented global teams. Your contributions will directly impact the functionality and performance of advanced hardware in the semiconductor industry.

What you will be working on:

• Design, develop, test, deploy, maintain, document, and improve software test suites.
• Perform both manual and automated testing in simulation environments and on physical semiconductor manufacturing equipment.
• Execute and analyze the functionality of engineering designs compared to intended outcomes, providing valuable feedback.
• Automate, streamline, and maintain QA processes to integrate seamlessly with CI/CD development workflows.
• Develop and implement quality standards, methods, and procedures to enhance existing business processes.
• Work closely with Process Engineering teams to test systems, validate engineering designs, and identify quality improvements.
• Create and manage tests plans and test cases, ensuring thorough validation of software enhancements and defect fixes.
• Gain an understanding of ASM system operations, including mechanical, electrical, and software functionality.
• Document testing procedures and feedback to ensure quality and consistency across projects.

What we are looking for:

• Bachelor’s + 5 years of experience, Master's +3 years OR PhD + 2 years of experience. Degree in Computer Science, Computer Engineering, or a related field.
• Proficiency in programming languages such as Python, C++, or C#.
• Experience with system quality assurance or engineering for complex electromechanical equipment with integrated software controls.
• Strong written and verbal communication skills for interacting with senior leadership and stakeholders.
• Willingness to travel up to 10% of the time.

What sets you apart

• Familiarity with tools like Jira, Confluence, Git, Test Complete, or TestRail.
• Experience in software configuration management or versioning in a software development environment.
• Knowledge of DevOps and CI/CD pipeline setup.

The Spares Planner & Clean Kit Management Planner ensures that all scheduled sanitation and maintenance activities are meticulously planned, kitted, and scheduled. This role bridges the gap between Field service engineers, Service Operations and Logistics, reducing downtime waiting for parts through proactive planning, material management, and scheduling.

The expectation for this position is the ability to work independently and able to multi task on daily operational responsibilities in deadline driven environment. The individual could demonstrate strong commitment to drive results. This position requires the highest level of communication, ownership, responsiveness. Data integrity and attention to detail are paramount. 

Education

Bachelor’s Degree or equivalent work experience (8+ years in related field); College courses in industrial engineering, supply chain, and business administration preferred.

Experience

• 8 or more years’ experience as a planner, expeditor or related experience with inventory control and/or supply chain studies. 
• Spares planning is desirable.
• Knowledge of planning and scheduling systems, planning master data management, purchase order expedites, spares logistics, inventory control theories with prior experience related to semiconductor, electronics industry or related high-volume customers are desirable. 

Skills

• Fluent in English is a must
• Experience with SAP and Microsoft Office Suite (Excel, Word, PowerPoint).
• Strong ability to analyze large datasets, interpret complex data, and derive meaningful insights.
• highest level of communicative competence
• Fluency in Mandarin Chinese is always a plus

Job Description

• Kit Preparation: Build "kits" to ensure Field service engineer / Customer have everything needed for the job before starting.
• Kit Planning & Scheduling: Develop kitting schedules that align with PM cycle.
• Inventory & Supplier Management:
• Analyze historical demand, adjust planning & validate forecasts.
• Manage stocking levels, E&O and inventory rebalancing.
• Support NPI planning, initial stocking strategies, and part lifecycle transitions.
• Monitor and validate MRP accuracy.  Responsible & resolves data integrity issues.  Responds to MRP validation inquiries from purchasing community.
• Expediting materials when foreseeing shortage in material horizontal table.
• Coordination: Act as the primary liaison between FSE, CSR, Buyer, Forecaster, and Logistics.
• Demonstrate ability to lead cross-functional meetings to drive the commitments or results.
• Regular analysis report and Ad-Hoc analysis support are both required.

Apply today to be part of what’s next.

Senior Engineer I, Software Engineering - Factory Automation 

As part of ASM’s Software Engineering team, you’ll develop advanced control software that drives the most sophisticated semiconductor equipment in the world. Your work will directly impact robotics, gas flow systems, and temperature control hardware—delivering real-time results in chip manufacturing. Based in Phoenix, you’ll collaborate globally and help shape the future of semiconductor automation and factory integration.

What you will be working on:

• Design and develop factory automation features on the equipment side, including:
  • Remote command execution
  • Host-driven FOUP handling and workflow integration
  • Recipe management from host systems
  • Factory Automation (FA) ID management
• Build and enhance supervisor-layer software infrastructure, working closely with GUI and device control teams
• Troubleshoot and resolve issues related to factory automation and system integration, both during development and in production environments
• Collaborate with customer station controller teams to ensure seamless host-to-equipment communication
• Support feature validation and testing (e.g., DLab) and participate in on-tool debugging and issue resolution when needed

What we are looking for:

• Bachelor’s degree in Computer Science, Software Engineering, or a related field (Master’s preferred)
• Strong programming experience in C#
• 5+ years of professional software development experience
• Experience in the semiconductor or manufacturing automation industry
• Hands-on experience with factory automation systems and equipment integration
• Familiarity with industry standards such as:
  • SECS/GEM
  • GEM300
  • EDA / Interface A
• Experience working with Automated Material Handling Systems (AMHS)
• Experience with modern communication frameworks such as gRPC

What sets you apart

• 10+ years in software development and architecture
• Experience with:
• Strong problem-solving skills in complex, distributed systems

• Experience working in cross-functional and customer-facing environments

• Experience with performance profiling and memory optimization
• Exposure to Agile/Scrum methodologies

Senior Engineer I, Software Engineering

As part of ASM’s Software Engineering team, you’ll develop advanced control software that drives the most sophisticated semiconductor equipment in the world. Your work will directly impact robotics, gas flow systems, and temperature control hardware—delivering real-time results in chip manufacturing. Based in Phoenix, you’ll collaborate globally and help shape the future of semiconductor automation and factory integration.

Responsibilities:

• Design, develop, test, deploy, and maintain software for semiconductor manufacturing equipment
• Build software for Windows and real-time operating systems
• Troubleshoot and resolve issues in real-time control systems
• Triage mechanical, electrical, and software bugs
• Lead escalation calls with field engineers and global customers
• Collaborate with QA and Support teams to manage regression testing
• Author and review system specifications, software designs, and test plans
• Investigate internal and external problem reports and propose solutions
• Evaluate and recommend software engineering tools
• Participate in system design and scheduling efforts
• Integrate and support factory automation protocols such as SECS/GEM
• Work closely with automation teams to ensure seamless equipment-factory communication

Requirements:

• BS Degree in Computer Science or related field. MS preferred.
• Strong software development skills in C#
• 5+ years’ experience as a generalist or mid-stack software developer
• Experience in the semiconductor industry
• Hands-on experience with factory automation systems
• Familiarity with SECS/GEM, GEM300, EDA/Interface A protocols
• Experience with AMHS (Automated Material Handling Systems)

What sets you apart

• 10+ years in software development and architecture
• Experience with:
  • Machine control software (especially for semiconductor equipment)
  • Windows and real-time operating systems
  • Multi-threaded and real-time applications
  • GUI development and device drivers
  • Networking, data communications, and EtherCAT
  • Dynamic scheduling algorithms with deadlock avoidance

Senior Engineer I, Software Engineering - Factory Automation 

As part of ASM’s Software Engineering team, you’ll develop advanced control software that drives the most sophisticated semiconductor equipment in the world. Your work will directly impact robotics, gas flow systems, and temperature control hardware—delivering real-time results in chip manufacturing. Based in Phoenix, you’ll collaborate globally and help shape the future of semiconductor automation and factory integration.

Responsibilities:

• Design, develop, test, deploy, and maintain software for semiconductor manufacturing equipment
• Build software for Windows and real-time operating systems
• Troubleshoot and resolve issues in real-time control systems
• Triage mechanical, electrical, and software bugs
• Lead escalation calls with field engineers and global customers
• Collaborate with QA and Support teams to manage regression testing
• Author and review system specifications, software designs, and test plans
• Investigate internal and external problem reports and propose solutions
• Evaluate and recommend software engineering tools
• Participate in system design and scheduling efforts
• Integrate and support factory automation protocols such as SECS/GEM
• Work closely with automation teams to ensure seamless equipment-factory communication

Requirements:

• BS Degree in Computer Science or related field. MS preferred.
• Strong software development skills in C#
• 5+ years’ experience as a generalist or mid-stack software developer
• Experience in the semiconductor industry
• Hands-on experience with factory automation systems
• Familiarity with SECS/GEM, GEM300, EDA/Interface A protocols
• Experience with AMHS (Automated Material Handling Systems)

What sets you apart

• 10+ years in software development and architecture
• Experience with:
  • Machine control software (especially for semiconductor equipment)
  • Windows and real-time operating systems
  • Multi-threaded and real-time applications
  • GUI development and device drivers
  • Networking, data communications, and EtherCAT
  • Dynamic scheduling algorithms with deadlock avoidance

We are seeking an R&D Metrology Engineer to join our dynamic materials development labs. The ideal candidate will be self-motivated, hands-on, and a resourceful problem solver with a strong understanding of materials characterization equipment and methods. In this role, you will work closely with ALD and Epi process engineers to develop and optimize next-generation materials for advanced node semiconductor processing.

This position requires working the early morning shift (1^st shift), including weekend coverage, to ensure optimal utilization and uptime of metrology equipment in a fast-paced R&D environment

Key Responsibilities

• Apply advanced metrology techniques to support the company’s materials and process development roadmap.
• Troubleshoot metrology equipment issues and collaborate with vendors to resolve hardware/software malfunctions.
• Partner with process engineers to select appropriate characterization methods and assist in data interpretation.
• Acquire and analyze metrology data; summarize findings for engineering and management review.
• Maintain tool uptime by partnering with vendors and supporting lab operations during off-hours.
• Train engineers on metrology tools, develop SOPs, and create recovery procedures for tool-down scenarios.
• Monitor uptime data; contribute to tool efficiency and continuous improvement initiatives.
• Develop metrology recipes and applications to streamline operations and solve technical challenges.
• Provide on-call support and ensure smooth lab operations during night and weekend shifts.
• Maintain LEAN 6S standards and contribute to a clean, organized lab environment.
• Stay current with industry trends by attending conferences, seminars, and workshops.

Required Qualifications

• Ph.D. in Materials Science and Engineering (preferred), or other engineering fields, Chemistry, Physics, Engineering, or related field.
• Hands-on experience with TEM, STEM, EDS, EELS, SEM, and FIB.
• Familiarity with techniques such as XRR, XRD, XRF, TXRF, FTIR, SPV, four-point probe, Hall effect, and defect inspection tools.
• Solid understanding of semiconductor processing and device fabrication.
• Proficiency in MS Office and JMP; strong data analysis and reporting skills.
• Excellent communication skills and ability to work independently and collaboratively.
• Availability for night and weekend support as needed.

Preferred Qualifications

• Experience developing metrology recipes and turnkey solutions.
• Background in lab operations and equipment maintenance.
• Programming experience, particularly in scripting or automation for data acquisition, data analysis, and tool control.

Engineer, Software Support

At ASM, our Software Engineering teams works on delivering software that has immediate, tangible results visible in the operation of semiconductor processing equipment hardware. The hardware includes robotics, gas valves, temperature controllers and other hardware.  

As a Software Support Engineer, you will make an impact by investigating, recreating, and troubleshooting software issues to resolution as reported by our customers. 

Responsibilities:

• Gather information to investigate the issue, reproduce it, determine the root cause, and recommend corrective actions. 
• Troubleshoot and resolve software issues, including embedded software for control systems.  Able to triage mechanical, electrical, and software bugs. 
• Responsible for managing escalation calls with field support engineers 
• Create bug reports for the developer to use when fixing the bug. 
• Work with QA to add replicated bugs to the regression. 
• Travel to customer sites to support installations, training, and troubleshooting of ASM products. 
• Talking to the account team and GPS group (not directly with the customer) when investigating reported issues. 
• The team will handle all issues until they are ready to send to the developer.  

Minimum Qualifications 

• BS+ 4 years experience or MS+ in Computer Science, Computer Engineering, or a related field. 
• Ability to read code and diagnose issues.  
• Software development or test (QA) experience. 
• Ability to travel 10-25% domestic and international.

Preferred Qualifications 

• Preferred expertise in C/C++, C#, Python, Gitlab/Github.
• Experience with semiconductor equipment preferred 
• Experience working with two or more of the following is preferred: software for machine control, Semiconductor Factory Automation, Multi-threaded applications, real-time software, device drivers, or other interrupt-driven software 

Senior Engineer, Software Support

At ASM, our Software Engineering teams works on delivering software that has immediate, tangible results visible in the operation of semiconductor processing equipment hardware. The hardware includes robotics, gas valves, temperature controllers and other hardware.  

As a Senior Software Support Engineer, you will make an impact by investigating, recreating, and troubleshooting software issues to resolution as reported by our customers. 

Responsibilities:

• Gather information to investigate the issue, reproduce it, determine the root cause, and recommend corrective actions. 
• Troubleshoot and resolve software issues, including embedded software for control systems.  Able to triage mechanical, electrical, and software bugs. 
• Responsible for managing escalation calls with field support engineers 
• Create bug reports for the developer to use when fixing the bug. 
• Work with QA to add replicated bugs to the regression. 
• Travel to customer sites to support installations, training, and troubleshooting of ASM products. 
• Talking to the account team and GPS group (not directly with the customer) when investigating reported issues. 
• The team will handle all issues until they are ready to send to the developer.  

Minimum Qualifications 

• BS+ 8 years or MS+ 4 years in Computer Science, Computer Engineering, or a related field. 
• Ability to read code and diagnose issues.  
• Software development or test (QA) experience. 
• Ability to travel 10-25% domestic and international.

Preferred Qualifications 

• Preferred expertise in C/C++, C#, Python, Gitlab/Github.
• Experience with semiconductor equipment preferred 
• Experience working with two or more of the following is preferred: software for machine control, Semiconductor Factory Automation, Multi-threaded applications, real-time software, device drivers, or other interrupt-driven software 

Senior Solution Sales Engineer - 

Position Description: 

We believe Solutions Engineers at Okta are involved in all stages of the customer’s development lifecycle and are experienced using presentations, email, phone and social media to connect with customers. We are looking for great teammates that can build sales presentations, product demonstrations, and educate customers (everyone from developers to product managers to C-level executives) on the best ways to cloud security technology.  We believe in Okta’s Solutions Engineers empathize with customers and quickly discern their true technical needs by asking detailed and clarifying questions and presenting solutions that target those needs. You have the rare combination of technical savviness and business insight and you’re looking for a career where you can utilize both. As a Senior Solutions Engineer at Okta, you will hone each of these skills by advising a diverse set of Fortune 500 customers on what is possible using Okta’s Identity Platform. 

Job Duties and Responsibilities:

• Collaborate with account executives to develop and execute territory and account strategies to maximize the Okta opportunity in those accounts
• Conduct research and discovery to understand customer requirements and communicate the business value of solving technology problems using cloud technology
• Execute the delivery of POCs for customers with complex use cases, collaborating with other Okta engineering teams as needed
• Craft technical content to show customers how to implement specific use cases or standard methodologies for new technologies
• Prepare and deliver demos to showcase how the Okta platform meets customer’s business needs and use cases.  
• Distill and communicate customer needs and product feedback to Product Management, Engineering, Marketing and Sales

Required Skills:

• 5+ years pre-sales engineering experience
• A passion to serve the customer, which has played out in some customer-facing role like consulting or support, ideally solutions engineering
• An ability to quickly and effectively communicate complex technical concepts via presentation, slides and whiteboard 
• A Strong Understanding of Identity & Access Management (IAM)
• SSO, MFA, SCIM, OAuth 2.0, OIDC, SAML, and LDAP.
• Lifecycle management, role-based access control (RBAC), and provisioning/deprovisioning.
• A strong understanding of Zero Trust Architecture and core security concerns within a typical application (password hashing, SSL/TLS, encryption at rest, XSS, XSRF)
• Hands-on experience in one or more of the following areas is a plus: web (JavaScript, HTML, frontend frameworks) development, mobile (iOS, Android) development, backend (Java, C#, Node.js, Python, PHP, Ruby) development, IP-based real-time communications
• Experience with cloud platforms: AWS, Azure, GCP.
• You are an elite communicator
• Can identify, map, and manage multiple personas: IT admins, CISOs, architects, procurement, and legal.
• Confident dispensing knowledge to a highly skilled and experienced audience
• Typically 10-25% travel
• Bachelor's degree in Engineering, Computer Science, MIS or a comparable field is preferred.

 This role requires in-person onboarding and travel to an office in the U.S. during the first week of employment.

#LI-hybrid

#LI-LSS1

P13951_3337053

The Maneuver Dominance team at Anduril develops operationally relevant, multi-asset autonomy. We are focused on building the next generation of autonomous capabilities by leveraging existing Anduril platforms like Ghost or Altius, bringing 3rd party platforms into Anduril's Lattice ecosystem, and developing breakthrough systems that will shape the future of the battlefield. If you are interested in working in an extremely innovative and fast paced environment, where your work directly makes an impact and difference in the products that are fielded this a fantastic opportunity.

As an Aviation Maintenance Engineer you will ensure the airworthiness and mission readiness of developmental UAS platforms across assembly, maintenance, and flight test operations. You will work alongside a team of engineers, test pilots, and test specialists, contributing hands-on mechanical expertise to aircraft assessment, maintenance coordination, and reporting on all facets of aircraft readiness. This role is central to enabling safe and efficient developmental flight test under both civil and military approval frameworks.

What You'll Do

• Assist with many aspects of aircraft assembly, planned and preventative maintenance, and operation including mechanical integration (flight control surfaces, propulsion), composites fabrication, and avionics build/integration/test.
• Troubleshoot, repair, and maintain aircraft and subsystems including landing gear, fuel system, flight control, and propulsion.
• Perform common airframe construction techniques.
• Complete aircraft and equipment documentation.
• Troubleshoot, repair, and maintain site support equipment.
• Communicate mechanical assessment with engineering and production.
• Perform validation and testing of various electronic components using equipment such as multimeters, oscilloscopes, network analyzers, and test racks.
• Perform proper FOD and tool control practices.

Required Qualifications

• 5+ years rotorcraft experience.
• Valid FAA Airframe & Powerplant (A&P) license.
• Excellent communication and teamwork abilities.
• Proficient with computer use (standard browser, word processing applications).
• Willing to be multi-capable, including some electronics troubleshooting and repair.
• Strong problem-solving skills and attention to detail.
• Ability to rapidly change roles/responsibilities while working in a fast paced, challenging work environment.
• Willing to travel international and domestic on an as needed basis.

Preferred Qualifications

• US security clearance eligible.
• Experience with both electric and turbine power plants.

About Team & About Role:

Rubrik’s sales organization is a united group of elite cross-functional sales professionals that help companies & government entities achieve resilience against cyberattacks, malicious insiders, and operational disruptions. We offer continuous professional development through our world class sales enablement program and our One Rubrik selling approach provides all the resources you need to exceed your goals, maximize your earnings potential and take your career to the next level. All this while doing something that truly matters, protecting the world's data.

As a SaaS Product Line Specialist Sales Engineer, you will provide technical direction and business guidance to the regional sales team. We are seeking a self-starter who will exceed sales quotas by driving innovative technical programs, pipeline generation alongside AEs, customer demonstrations, POCs, and overseeing day-to-day account-level activities. You will be responsible for evangelizing, positioning, and architecting Rubrik’s Data Resilience, Observability and Remediation tools to a targeted list of new & existing customers throughout the Western Region.

What You'll Do:

• Provides technical leadership and direction to Rubrik, customers, and prospects in the development and positioning Rubrik's SaaS solutions (M365, Google Workspace, Jira, Dynamics)
• Serves as a trusted technology advisor to customers and serves as a public cloud subject matter expert when positioning Rubrik's SaaS capabilities to key accounts.
• Leads technical sales calls, gathers / analyzes customer feedback, and identifies trends.
• Qualifies sales opportunities in the terms of customer technical requirements, competition, decision making process and funding.
• Maintains a consistent cadence with product management to ensure product roadmap alignment with customer demands.
• Assists with the development of marketing and sales collateral to ensure alignment with customer needs and technical accuracy.
• Aids in the development and delivery of technical enablement to Rubrik, channel, and alliance partner sales architects.
• Cross-functionally drives the adoption of Rubik's cloud native protection technologies throughout Rubrik and the public cloud ecosystem.

Preferred Qualifications:

• 5+ years of sales engineering experience in an unstructured data environment with a proven track record of success
• Additional preference for experience with M365, Google Workspace, Dynamics, Jira and other SaaS applications
• Driven – need for success, highly energetic with a strong hands-on, “can do” approach.
• The successful candidate must have a fundamental breadth of technical knowledge in cloud data management, backup and disaster recovery and data analytics.
• Entrepreneurial - willing to go the extra mile, strong work ethic, resourceful, “get it done” attitude
• Strives in moving in a fast-paced environment; including handling multiple calls/demos per day with immediate follow up.
• A high level of business acumen and experience working with Cx0 level personnel, bringing technology solutions to solve business challenges.
• Smart, adaptable and open-minded

#LI-CG1

About the Company

Gemini is a global crypto and Web3 platform founded by Cameron and Tyler Winklevoss in 2014, offering a wide range of simple, reliable, and secure crypto products and services to individuals and institutions in over 70 countries. Our mission is to unlock the next era of financial, creative, and personal freedom by providing trusted access to the decentralized future. We envision a world where crypto reshapes the global financial system, internet, and money to create greater choice, independence, and opportunity for all — bridging traditional finance with the emerging cryptoeconomy in a way that is more open, fair, and secure. As a publicly traded company, Gemini is poised to accelerate this vision with greater scale, reach, and impact.

The Department: Enterprise Infrastructure

Within Operations, the Enterprise Infrastructure team owns the internal technology ecosystem that supports Gemini's offices and employees. The team operates as a unified engineering and service organization, combining front-line support excellence with DevOps-driven platform engineering under a single mandate.

Our enterprise technology strategy fuels business growth through an engineering-first approach by delivering a modern, secure, and scalable foundation for seamless collaboration, efficient operations, and future-ready innovation. By emphasizing operational excellence, continuous improvement of existing systems, and strategic automation – including Infrastructure as Code, GitOps workflows, and AI-augmented operations – we position IT as an engineering discipline whose impact extends across the department and the broader organization.

The Role: Staff Enterprise Infrastructure Engineer

As a Staff Enterprise Infrastructure Engineer, you will serve as a technical leader and force multiplier across the full breadth of Enterprise Infrastructure – from end-user support excellence to backend platform engineering and automation.

You will apply DevOps methodologies to drive the design, implementation, and continuous improvement of the systems that underpin Gemini's global workforce. This includes owning strategies and execution for endpoint management, user identity and access lifecycle, internal tooling, Infrastructure as Code, CI/CD pipelines, and AI-augmented operational workflows. You will define and track key metrics, communicate trends and capacity insights to leadership, and make strategic decisions about tooling adoption, vendor relationships, and architectural direction with an awareness of how these decisions impact teams and stakeholders beyond Enterprise Infrastructure.

A core expectation of this role is that you approach problems with an eye toward scalability and sustainability, building systems that reduce manual toil, improve reliability, and position the team for rapid growth. You are expected to critically evaluate existing systems and processes, challenging assumptions, identifying inefficiencies, and driving improvements to legacy workflows with the same rigor applied to new builds. You will act as a mentor and escalation point for others, fostering a culture of engineering rigor within support operations and a culture of user empathy within engineering work.

The ideal candidate has deep experience across both operational support and DevOps-driven infrastructure, thrives in ambiguity, and is energized by the challenge of consolidating legacy tooling into modern, automated, GitOps-driven workflows. They bring a pragmatic approach to adopting emerging capabilities – including agentic AI – and are motivated by building solutions that scale beyond their immediate team to benefit the broader organization.

This role is required to be in person 5 days per week at our Tempe, AZ office.

Responsibilities:

• Office & Endpoint Operations

  • Manage hardware inventory, secure storage, and physical IT infrastructure across global office locations.
  • Administer and support endpoint fleets including provisioning, patch management, and peripheral troubleshooting.
  • Support office A/V systems, network connectivity, and conference room technology.

• Service Operations & Delivery

  • Resolve service and incident requests with quality, speed, and thorough documentation.
  • Manage user identity and access lifecycle – including SSO, SCIM, MFA, and security key administration.
  • Maintain and improve SaaS platform configurations, vendor relationships, and internal support workflows.
  • Track operational metrics, surface trends, and communicate capacity insights to leadership.

• Platform Engineering & Automation

  • Build and maintain infrastructure using IaC, configuration management, and GitOps-driven deployment workflows.
  • Develop internal tools and integrations that automate fleet operations, user lifecycle management, and cross-service orchestrations
  • Design and operate CI/CD pipelines for infrastructure changes, tooling, and endpoint configurations.
  • Lead endpoint management platform migrations, including policy authoring, GitOps-managed profiles, and fleet-wide telemetry.
  • Design and implement agentic AI workflows to augment IT operations, applying context engineering principles to enable reliable, bounded automation and validations.

Minimum Qualifications:

• 8+ years of progressive experience in enterprise IT, infrastructure engineering, or a DevOps-focused support capacity.
• Strong proficiency with macOS fleet management at scale using MDM platforms.
• Hands-on experience with Infrastructure as Code and configuration management tooling.
• Proficiency in at least two of the following languages: Go, Python, Swift – with demonstrated ability to build production-grade internal tooling and API integrations.
• Deep experience with identity and access management platforms (Okta, Google Workspace, Active Directory), including SSO, SCIM, Device Assurance Policies, MFA, and user lifecycle automation.
• Working knowledge of CI/CD pipelines (GitHub Actions or equivalent) and Git-based development workflows.
• Solid understanding of networking fundamentals.
• Experience with AWS cloud services in a production or internal-tooling context.
• Proven ability to communicate complex technical concepts to both technical and non-technical audiences, including leadership.
• Experience mentoring junior engineers and contributing to team culture, hiring, and process improvement.

Preferred Qualifications:

• Experience in fintech, crypto, or regulated financial services environments.
• Experience with FleetDM and osquery for endpoint telemetry, compliance, and GitOps-managed device configuration.
• Experience designing agentic AI harnesses and workflows or applying context engineering techniques to augment operational processes (e.g., Claude Code, OpenCode, LLM-driven automation).
• Proficiency in Go, Python, and/or Swift for internal tooling development.
• Hands-on experience deploying reliable tools via Containerization and Orchestration (Docker, Kubernetes/EKS).
• Experience managing 1,000+ user accounts across a globally distributed workforce.
• Working knowledge of the Apple MDM protocol and open-source macOS tooling (Munki, AutoPkg, SaltStack, etc.).
• Experience with A/V systems administration (Crestron, Logitech, Chromebox for Meetings).
• SaaS Administration experience (Anthropic, Atlassian, Google Workspace, Linear, Okta, & more), service management workflows, and SLA reporting.

• Competitive starting pay
• A discretionary annual bonus
• Long-term incentive in the form of a new hire equity grant
• Comprehensive health plans
• 401K with company matching
• Paid Parental Leave
• Flexible time off

At Gemini, we strive to build diverse teams that reflect the people we want to empower through our products, and we are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. Equal Opportunity is the Law, and Gemini is proud to be an equal opportunity workplace. If you have a specific need that requires accommodation, please let a member of the People Team know.

#LI-AA1

Location

This role requires working from our downtown Toronto office 4 days/week (Mon, Tues, Thurs, Fri). Candidates must be based within a 50-mile commuting distance of the office.

About the Role

At Opendoor, AI isn’t a side project - it’s how we work. Across the company, teams default to AI to solve problems, ship faster, and remove friction from everything we do. You will help define the future of how we work by building AI powered workflows, automation, and experiences that drive leverage across Finance — spanning month-end close, SEC Reporting, FP&A, Technical Accounting, Tax, Procurement, Accounts Payable, and Payroll. This is high agency work in high ambiguity - turning messy problems into clean solutions, prototyping fast, and shipping.

You'll make systems design and tooling decisions that affect how our Finance operations scale – so we need people who think critically about what and why they build, the impact it will have on our team, and how to measure success. 

We're looking for AI-native builders who know how to automate complex operational workflows. The accounting and finance domain knowledge can be learned — what matters most is that you're wired to build, that you default to AI in how you approach problems, and that you can map messy business processes into clean, automated systems. 

Why Join Us

• Build AI automation for our Financial Operations from the ground up
• Work on cutting-edge systems directly impacting key Finance processes in a public company 
• Collaborate with talented engineers and finance team members
• Access to enterprise AI tools — Claude Code, Cursor, and LLM APIs. We invest heavily in AI infrastructure so you can build and experiment.

What You'll Do

This is a hands-on individual contributor role. You will design, build, and ship automations — not just evaluate tools or write strategy decks.

• Turn complex Accounting and Finance problems into clear system designs, experiments, and implementation plans
• Build and maintain AI-powered automation that improves operational efficiency, accuracy, and scale across Finance functions
• Automate workflows (journal entries, reconciliations, flux analysis) using SQL, Python, and agentic AI
• Maintain clean, auditable data throughout automated workflows, with dashboards and controls that support both operational and compliance needs
• Partner with the internal SOX team and external auditors to ensure automated processes meet compliance standards and are well-documented
• Build and scale AI literacy across the Finance team through runbooks, documentation, best practices, and hands-on training 

What You'll Bring

• At least 5+ years of work experience building automation, operational workflows, or data systems in any industry. 
• Familiarity with LLM deployment, context engineering and comfortable writing SQL or Python code
• Understanding of machine learning lifecycle concepts: training, evaluation, deployment, monitoring

Systems Thinking: You understand how data flows through operational systems. You can look at a business process, identify the inputs, outputs, dependencies, and failure modes, and design automation around it.

System Design: You take complex, messy problems and reduce them to simple, durable architecture. 

Communication: Articulate problems clearly to both technical and non-technical audiences. You write clean documentation, build dashboards that tell a story, and can walk a stakeholder through your design rationale.

AI Alchemy: You have high agency and a tinkering mindset. You default to experimenting, running variations with new tools and methods - LLMs, automation platforms, coding assistants until you can transmute data into high quality results. You're comfortable writing SQL code, working with APIs, and stitching tools together to ship solutions fast.

Impact Driven: You optimize for impact over novelty, choosing the right tools for the job and ensure performance, scalability and resiliency.

Bonus if you have:

• Experience in Accounting or Finance 
• Comfort working in regulated or compliance-sensitive environments

Tools and Technologies

You'll work across a range of tools and we expect this list to evolve. Ideal candidates will have experience with the following tech stack:

• AI coding assistants: Claude Code, Cursor, or similar 
• Workflow automation: Gumloop or similar platforms
• MCP integrations
• Agentic AI frameworks or building automation flows 
• Data / ERP platforms: Snowflake, NetSuite, Ramp or similar 

Note: Opendoor provides enterprise-level access to all AI tools listed above. Our engineers currently consume billions of AI tokens per month across the company and are not constrained by token limits or personal account restrictions.

Compensation

Our compensation plan consists of a base salary and Opendoor equity  in addition to a comprehensive package of benefits including paid time off, paid holidays, medical/dental/vision insurance, basic life insurance, and 401(k) to eligible employees.  All compensation parameters are based on experience.

 #LI-DM

#LI-Onsite

Role overview

As a Senior Process Engineer at ASM, you will work with semiconductor processing and analytical equipment to research, develop and optimize processes focused on oxidation, annealing, curing, Atomic Layer Deposition (ALD, PEALD), Epitaxy or PECVD for logic, memory, analog, power, and MEMS applications. You will design and conduct complex experiments, measurements and perform the interpretation of complex experimental output. While you deliver creative and inventive solutions, technical publications, and generation of Intellectual Property (IP) are an essential function of this position. 

Note: This role is intended for candidates who are graduating in Spring 2026 or have graduated within the past two years and have 0–2 years of professional work experience.

Responsibilities 

• Creative problem solver with experience in developing new films for emerging applications and experience in chemistry/materials characterization.
• Works with semiconductor processing equipment to research, develop and optimize unit processes focused on the deposition of metal and dielectric films via ALD, PEALD, Epitaxy, and/or PECVD.
• Bringing innovative ideas, staying abreast of state-of-the-art processing applications in the semiconductor industry to be effective.
• Process consulting and accountability including technical papers on advanced process applications and Intellectual Property creation.
• Participates in and drives technical problem-solving sessions using the related scientific method and industry tools, such as Ishikawa diagrams.
• Designs and conducts experiments, in addition to measuring and interpreting experimental output, aimed at fulfilling stated objectives using Design of Experiments (DOE) and Response Surface Methodology (RSM).
• Troubleshoots equipment problems and is personally and actively engaged in problem via “hands-on” modalities.
• Works with customers and central marketing to understand and define requirements to successfully execute and document customer demonstrations.
• Develops methods and techniques for integrating metal and/or oxide films into existing and future device technologies.
• Ensures successful product transfer to customer base by performing demonstrations, training field service personnel, traveling to support remote sites (up to 10% travel required), and drafting documentation regarding process development, tool operation and maintenance.
• Produces technical papers on process, equipment, and device integration improvement strategies and presents to professional audience.
• You may be assigned supervisory duties over supporting process engineering technicians and aides. These supervisory duties could include direct input into employees’ performance evaluations, discipline, and discharge.

Minimum Qualifications

• We are looking for candidates who have graduated within the last 0-2 years or will graduate in Spring or Fall 2025 and are eager to begin or advance their career.
• Master’s or PhD degree in Chemical Engineering, Materials Science, Electrical Engineering, or Physics.
• 0-7+ years of combined education, research, and work experience with:
• Cure, oxidation, ALD, CVD, Epitaxy, PECVD and/or other thin film deposition.
• Materials characterization techniques such as XPS, SIMS, RBS, AFM, XRR, XRD, TEM, SEM and ellipsometry.
• Knowledge of electrical characterization techniques for CMOS devices.
• Application of dielectric and/or metal films for logic and memory structures.
• Training in CFD (computational fluid dynamics), either theoretical or practical is preferred.
• Knowledge of electrical characterization techniques for CMOS devices is preferred.
• Graduating in Fall 2025 or graduated within the past two years.
• 0–2 years of professional work experience.

Preferred Qualifications

• Ability to independently manage complex process development projects, including personnel, project schedules, experimental thrusts, hardware procurement and budgetary oversight.
• Ability to be a process consultant to internal and external customers.
• An authority on interplay between hardware design (e.g., chemical reactor design) and operation and process outputs
• Understanding of requirements for integration of metals as work function materials and barrier layers in FEOL and BEOL process flows
• Demonstrated ability to develop and completely characterize deposition processes using first principles and experimental design techniques (e.g., DOE, RSM).
• Experience with the theory, practice, and interpretation of materials characterization techniques such as XPS, SIMS, RBS, AFM, XRD, HRTEM, FESEM, Auger, Raman and ellipsometry.
• Excellent verbal and written communication skills, with ability to clearly communicate advanced technical constructs in direct and concise manner.

The application window will be open until at least April 24, 2026 . This opportunity will remain online based on business needs which may be before or after the specified date.

This role is not eligible for immigration sponsorship.

This role is part of the Growth department on the Digital team. You'll collaborate with ad operations and growth specialists to deliver web, app, and media analytics to key stakeholders. The Growth team works across departments—including sales, marketing, brand, and product—to identify new opportunities and test strategies to drive revenue and improve the customer experience with GFiber’s products.

Role Description

As the Marketing Web Developer you will be the technical lead responsible for managing GFiber’s websites and integration points, supporting digital marketing and sales efforts. You’ll lead, organize, and manage program activities that drive business outcomes while developing systems to proactively identify improvements and drive future optimizations including change management and performance metrics. You'll oversee content management systems, A/B testing tools, and tracking implementations, ensuring smooth operations and optimal performance. Collaboration with cross-functional teams will be key in driving our analytics, marketing, and growth initiatives.

In this role, you'll:

• Engineer and maintain the GFiber web architecture, writing clean, scalable code to integrate marketing technology stacks and third-party services. 
• Implement and manage tools for content management, knowledge management, A/B testing, tracking, and services integration.
• Create technical design documents for new website features and integrations.
• Manage user access, roles, and responsibilities for web tools like Contentful, Optimizely, and KMS Lighthouse.
• Support change requests, issue management, and day-to-day updates related to website content and services, and also align with stakeholders on decisions and changing circumstances.

At a minimum we'd like you to have:

• Bachelor's degree in Digital Marketing, Computer Science, or related fields—or equivalent practical experience.
• 4 years' experience building high-traffic marketing websites and scalable web systems using React, Typescript and JavaScript.
• Experience with A/B testing tools (e.g. Optimizely, Optimize, Test and Target) and experiment configuration.
• Experience implementing and leveraging analytics, tracking and data warehouse platforms (e.g., Google Analytics 4, Google Tag Manager, BigQuery).

It's preferred if you have:

• Experience with headless Content Management Systems (e.g. Contentful, Sanity).
• Experience with ad-tech integrations and custom tracking pipelines for Google Ads and Campaign Manager, ensuring accurate reporting and data attribution for high-traffic marketing sites via API. 
• Experience with AI tools coding tools and LLM technologiesExperience using written and verbal communication to convey technical requirements to both technical and non-technical stakeholders.
• Experience with Python and back-end integrations to support large-scale consumer traffic.

The US base salary range for this full-time position is between $132,800 - $175,100 + bonus + cash award + benefits. As pay varies by location, your recruiter will share more about the specific salary range for your targeted location during the hiring process.

#LI-DNI

What The Role Is

We are seeking a talented Senior Data Engineer to design, build, and maintain our data infrastructure supporting mission-critical energy operations. You'll work at the intersection of renewable energy and data, developing pipelines that process everything from real-time asset performance data to complex trading and risk analytics. This hybrid role offers the opportunity to make a direct impact on clean energy operations while working with a cutting-edge data stack including Snowflake, Dagster, dbt, Modal, and GitLab.

What You'll Be Doing

Analytics Infrastructure & Data Warehouse Management

• Design, deploy, and maintain scalable data infrastructure to support enterprise analytics and reporting needs
• Manage Snowflake instances, including performance tuning, security configuration, and capacity planning for growing data volumes
• Optimize query performance and resource utilization to control costs and improve processing speed

Data Pipeline Development & Orchestration

• Build and orchestrate complex ETL/ELT workflows using Dagster to ensure reliable, automated data processing for asset management and energy trading
• Develop robust data pipelines that handle high-volume, time-sensitive energy market data and asset generation and performance metrics
• Implement workflow automation and dependency management for critical business operations

Data Transformation & Analytics Support

• Develop and maintain dbt models to transform raw data into business-ready analytical datasets and dimensional models
• Create efficient SQL-based transformations for complex energy market calculations and asset performance metrics
• Support advanced analytics initiatives through proper data preparation and feature engineering

Data Quality & Governance

• Implement comprehensive data validation, testing, and monitoring frameworks to ensure accuracy and consistency across all energy and financial data assets
• Establish data lineage tracking and privacy controls to meet regulatory compliance requirements in the energy sector
• Develop alerting and monitoring systems for data pipelines, including error handling, SLA monitoring, and incident response

CI/CD & DevOps

• Lead continuous integration and deployment initiatives for Dagster and dbt pipelines, and Streamlit/Gradio application deployments to Linux servers
• Implement automated testing and deployment automation for data pipelines and analytics applications
• Manage version control and infrastructure as code practices

Cross-functional Collaboration

• Partner with Analytics Engineers, Data Scientists, and business stakeholders to understand requirements and deliver solutions
• Work closely with asset management and trading groups to ensure real-time data availability for market operations and risk calculations
• Collaborate with credit risk teams to develop data models supporting financial analysis and regulatory reporting
• Translate business requirements into technical solutions and communicate data insights to stakeholders

Documentation & Security

• Create and maintain technical documentation, data dictionaries, and onboarding materials for data assets
• Implement role-based access controls, data encryption, and security best practices across the data stack
• Monitor and optimize cloud infrastructure costs, implement resource allocation strategies, and provide cost forecasting

What You'll Bring

• Experience: 4+ years of hands-on data engineering experience in production environments
• Education: Bachelor's degree in Computer Science, Engineering, or a related field
• Data Orchestration: Proficiency in Dagster for pipeline scheduling, dependency management, and workflow automation; Airflow experience a plus
• Cloud Data Warehousing: Advanced-level Snowflake administration, including virtual warehouses, clustering, security, and cost optimization
• Data Transformation: Proficiency in dbt for data modeling, testing, documentation, and version control of analytical transformations
• Programming: Strong Python and SQL skills for data processing and automation
• CI/CD: 3+ years of experience with continuous integration and continuous deployment practices and tools; proficiency in GitLab CI/CD required (GitHub Actions experience a plus)
• Database Technologies: Advanced SQL skills, database design principles, and experience with multiple database platforms
• Cloud Platforms: Proficiency in AWS/Azure/GCP data services, storage solutions (S3, Azure Blob, GCS), and infrastructure as code
• Data Integration: Experience with APIs, various data connectors, and formats
• Data Security: Understanding of data security best practices, access controls, encryption, and role-based access management
• AI & LLM Proficiency: Practical experience integrating and leveraging large language models (e.g., OpenAI, Anthropic, or open-source models) within data workflows; ability to apply LLMs efficiently and securely, with awareness of data privacy boundaries, prompt injection risks, and responsible AI usage in production environments
• Problem-Solving: Strong analytical and troubleshooting skills with attention to detail
• Communication: Ability to work effectively with both technical and business stakeholders
• Work Style: Comfortable with a hybrid work environment (2-3 days in office); highly autonomous and self-directed with a strong work ethic and growth mindset; exceptional attention to detail; able to take ownership of projects end-to-end with minimal oversight

What Would Be Nice

• Experience in the energy, utilities, or financial services industries
• Knowledge of energy trading concepts, market data, or asset management
• Familiarity with data governance frameworks and regulatory compliance (SOX, GDPR, CCPA)
• Experience with infrastructure as code (Terraform, CloudFormation)

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Hybrid

Supervisor Engineer (team lead), Software Support

At ASM, our Software Engineering teams works on delivering software that has immediate, tangible results visible in the operation of semiconductor processing equipment hardware. The hardware includes robotics, gas valves, temperature controllers and other hardware.  

As a Supervisor Engineer, Software Support, you will make an impact by investigating, recreating, and troubleshooting software issues to resolution as reported by our customers. 

Responsibilities:

• Oversee the day-to-day operations of the support team, including task assignment, workload distribution, and monitoring punctuality and backlog management.
• Act as the final point of contact for complex or high-priority customer escalations, ensuring timely and effective resolution.
• Provide coaching and professional development for staff, identifying training needs and creating individualized development plans.
• Gather information to investigate the issue, reproduce it, determine the root cause, and recommend corrective actions. 
• Guide your team members to create bug reports for the developer to use when fixing the bug. 
• Travel to customer sites to support installations, training, and troubleshooting of ASM products. 
• Talking to the account team and GPS group (not directly with the customer) when investigating reported issues. 

Minimum Qualifications 

• BS+ 8 years or MS+ 4 years in Computer Science, Computer Engineering, or a related field. 
• Proven ability to motivate, inspire, and foster a collaborative team culture.
• Strong troubleshooting skills in hardware and software, with familiarity data structure, networking, algorithm and modern operating systems (Windows).
• Software development or test (QA) experience. 
• Ability to travel 10-25% domestic and international.

Preferred Qualifications 

• Preferred expertise in C++, C#, Python, Gitlab\Github.  
• Experience with semiconductor equipment preferred 
• Experience working with two or more of the following is preferred: software for machine control, Semiconductor Factory Automation, Multi-threaded applications, real-time software, device drivers, or other interrupt-driven software 

We are seeking a skilled Engineer II, Electrical Engineering, to join our team, focusing on the design, development, and troubleshooting of electrical circuits for semiconductor tools. This role is pivotal in ensuring the safety and efficacy of our electrical systems, while collaborating with cross-functional teams to create cohesive tool architectures. 

Responsibilities: 

• Design, develop, test, and troubleshoot electrical circuits related to semiconductor tools 

• Ensuring safety is a priority in design and operation, utilizing safety-rated devices 

• Research and select components that meet tool requirements 

• Collaborate with cross-disciplinary teams to design unified tool architecture 

• Create schematic and cable designs 

• Adhere to the company's Engineering Change Order (ECO) process 

• Review documents meticulously, adapt to changes, handle tasks independently, and manage time effectively 

• Work closely with designers and drafters to generate detailed documentation 

• Understanding of pneumatics and PCB design is advantageous 

 Required Skills: 

• Bachelor’s degree in electrical engineering or related field 

• Proven experience in electrical circuit design and troubleshooting 

• Strong knowledge of safety standards and practices 

• Excellent verbal and written communication skills 

• Proficiency in technical writing 

• Familiarity with recognized safety and machinery standards such as NEC, NFPA 79, UL 508A, FM 4910, ISO 13849, EN/IEC 60204-1 & -33, SEMI specifications is a plus 

• Extensive Experience with AutoCAD (Cable Drawing and Schematic) 

• Experience in Design/Component selection 

Job's mission

What you will be working on

What we are looking for

What sets you apart

Benefits:

• Health insurance (medical, dental, vision)
• 401(k)Retirement plan
• Paid time off (vacation, sick, flex, and holiday) & Parental Leave Benefit
• Life and disability insurance
• Employee assistance program (EAP), Family support, and parental consulting groups
• Healthcare Concierge
• Health Savings and Flexible Spending Accounts
• Lifestyle Spending Account / Fitness Reimbursement
• Fertility & Family Support Programs
• Wellness Program with medical premium discounts

As a Senior Software Engineer at ASM, you’ll sit at the intersection of cutting-edge software, complex hardware, and real-world customer impact. You’ll be a technical leader who solves the toughest software challenges in semiconductor manufacturing—driving system reliability, safety, and performance for our global customers. In this role, you won’t just fix issues—you’ll lead investigations, influence architecture, and deliver long-term, systemic improvements that power advanced semiconductor technology worldwide.

What You’ll Be Working On

• Lead deep technical investigations into software-related safety interlocks, validating corrective and preventive actions.
• Analyze and optimize multiple interacting subsystems, gaining end-to-end understanding of full platform workflows.
• Drive root cause and corrective action (RCCA) using packet captures, log correlation, and system-level analysis.
• Design and evaluate subsystem architectures, including multi-threading and scheduler interactions.
• Develop, test, deploy, maintain, and continuously improve software for advanced semiconductor manufacturing equipment.
• Troubleshoot complex software issues, including real-time control systems.
• Act as a technical escalation point—supporting field engineers and customers globally.
  Partner with QA and Support to reproduce field issues and strengthen regression coverage.
• Author and review system specifications, software designs, and test plans.
• Investigate internal and external technical inquiries, delivering clear analysis and actionable solutions.
• Evaluate and influence software engineering tools and system design decisions.
• Plan and coordinate rapid software fixes and deployments in high-impact environments.
• Present technical insights, progress, and outcomes in customer QBRs, including findings from complex DOE analyses.

What We’re Looking For

• Bachelor’s degree in Computer Science (or related field) with 7+ years of industry experience, or Master’s degree with 4+ years, or PhD with 3+ years of relevant experience
• Strong software development expertise in C++ and/or C#
• Solid understanding of multi-threaded applications
• Experience working with software documentation, specifications, and APIs
• Good knowledge of software memory architecture and debugging

What Sets You Apart

• Advanced degree (Master’s or PhD) and experience in software architecture and machine control systems, ideally within semiconductor equipment
• Hands-on experience with GUIs, device drivers, and interrupt-driven software
• Knowledge of data communications, networking, and EtherCAT
• Understanding of dynamic scheduling algorithms and deadlock avoidance
• Proficiency with development tools such as debuggers, application builders, and configuration management systems
• Ability to triage and diagnose mechanical, electrical, and software issues holistically
• Strong analytical skills, including designing and interpreting complex DOEs using multivariate methods or PCA

As a Principal Engineer, Global Product Management at ASM, you’ll have the opportunities to get involved in a wider scope of work compared to our larger competitors. While the workload is challenging, you are given the independence and autonomy to perform at your peak. This work requires being innovative, so you must have the ability to collaborate with others to deliver creative solutions, work well under pressure and pay great attention to small details.

This position is responsible for product management & technical marketing activities within the Product Management group. Every day is different, working with different customers and different products. This role is for someone who enjoys and is intellectually curious about the whole process and being part of it. You get to work external global customers that have many different needs and you will be part of the solution.  

Key Responsibilities:

• Product Life Cycle – Drive the product life cycle from concept to high volume manufacturing to obsolescence
• Roadmaps – Maintain product roadmap for a portfolio of products, periodically update roadmap through discussions with customers and internal experts, align product priorities and resources to roadmap
• Customer Engagement – Support Technical Meeting with customers, create and manage customer presentations, detailed market and competitive analysis
• MRS – Own the market requirement spec documents and ensure product development priorities align with MRS and customer needs
• Strategic Marketing – Prepare market strategies for executive R&D expenditure requests, develop roadmap and product strategy presentations for executives within ASM
• Financial – Work with finance department on NPV and IRR for products, maintain cost of ownership models
• Business Planning and Market Analysis – Attend company operation/planning meeting, create Business plan/Operation review materials, create business forecast based on market information, support budget planning, competitive analysis
• Drive teams internally to meet set products profit gross margins
• New Product Introductions – Detailed market analysis for inflections, development of business plans, internal executive alignment, positioning of products
• Support technical activities – Work with product development teams on specifications and data collection requirements, manage customer demo requests, prioritization of product development activities
• Supplier Engagement – Develop key capabilities for new products through collaboration with suppliers
• Product Promotion – Create promotional materials for conferences and launches, Sales and product support training, Introductions to Customer

Requirements:

• 10+ years of semiconductor / capital equipment industry experience, of which a significant portion has been in technical marketing and / or product management roles
• Masters or PhD in Material Science, Electrical/Chemical/Mechanical Engineering or equivalent
• Process, hardware, or device experience in semiconductors or capital equipment
• ALD or CVD experience is a plus
• High level of proficiency or deep understanding of capital equipment systems in semiconductor or similar industry
• Direct customer engagement or supplier management
• Ability to work with multiple internal disciplines on portfolio of products
• Understanding of product life cycle and technical marketing
• Ability to travel globally

** This position is not eligible for visa sponsorship. Candidates cannot require sponsorship now or in the future**

We are seeking a highly skilled Senior Mechanical Engineer with 5+ years of professional experience and a Bachelor’s degree in Mechanical Engineering to lead the design, development, and evaluation of advanced mechanical and electromechanical systems.

Key Responsibilities

• - Design complex mechanical and electromechanical subsystems and systems.
• - Develop detailed manufacturing and testing specifications and methods.
• - Evaluate mechanical systems and products using engineering principles.
• - Confirm system and product capabilities through feasibility studies and testing.
• - Drive product development by reviewing requirements and researching materials.
• - Ensure system and product quality through testing and validation.
• - Provide engineering guidance and mentor junior personnel.
• - Maintain compliance with government and industry regulations.
• - Maintain technical documentation and system data.
• - Support cross-functional engineering initiatives.

Required Skills & Qualifications

• - Strong capabilities in requirements analysis, design skills, conceptual skills, and presenting technical information.
• - Experience in Fluid Systems and Wet environments
• - Knowledge of Complex motor drive system
• - Stress Analysis of large Frame
• and other sub-systems
• - Demonstrated quality focus, technical depth, and job knowledge.
• - Bachelor’s degree in Mechanical Engineering.
• - Minimum 5 years of mechanical engineering experience.
• - Proficiency with Siemens NX, Team Center, AutoCAD, SolidWorks, and PDM systems.
• - Excellent communication and collaboration skills.
• - Strong attention to detail and analytical thinking.
• - Proven ability to work under strict deadlines.

Knowledge of Chemical Mechanical Planarization Tool would be beneficial.

** This position is not eligible for visa sponsorship. Candidates cannot require sponsorship now or in the future**

We are seeking a highly skilled Senior Mechanical Engineer with 10+ years of professional experience and a Bachelor’s degree in Mechanical Engineering to lead the design, development, and evaluation of advanced mechanical and electromechanical systems.

Key Responsibilities

• - Design complex mechanical and electromechanical subsystems and systems.
• - Develop detailed manufacturing and testing specifications and methods.
• - Evaluate mechanical systems and products using engineering principles.
• - Confirm system and product capabilities through feasibility studies and testing.
• - Drive product development by reviewing requirements and researching materials.
• - Ensure system and product quality through testing and validation.
• - Provide engineering guidance and mentor junior personnel.
• - Maintain compliance with government and industry regulations.
• - Maintain technical documentation and system data.
• - Support cross-functional engineering initiatives.

Required Skills & Qualifications

• - Strong capabilities in requirements analysis, design skills, conceptual skills, and presenting technical information.
• - Experience in Fluid Systems and Wet environments
• - Knowledge of Complex motor drive system
• - Stress Analysis of large Frame
• and other sub-systems
• - Demonstrated quality focus, technical depth, and job knowledge.
• - Bachelor’s degree in Mechanical Engineering.
• - Minimum 10 years of mechanical engineering experience.
• - Proficiency with Siemens NX, Team Center, AutoCAD, SolidWorks, and PDM systems.
• - Excellent communication and collaboration skills.
• - Strong attention to detail and analytical thinking.
• - Proven ability to work under strict deadlines.

Knowledge of Chemical Mechanical Planarization Tool would be beneficial.

What The Role Is

The O&M Cost Strategy Associate supports the development, analysis, and continuous improvement of Operations & Maintenance (O&M) cost models across Clearway’s renewable energy portfolio. This role focuses on building and maintaining data-driven cost insights, supporting forecasting activities, benchmarking O&M spend, and assisting cross-functional teams in evaluating operational performance and future cost trends.

The ideal candidate has a solid foundation in renewable energy operations or power generation, hands-on experience with financial or operational modeling, and knows how to communicate technical findings across a range of audiences — from engineering and procurement to finance and business development. A solid foundation in renewable energy or power generation and fluency with tools like Power BI are key. Familiarity with AI-assisted workflows is a plus.

If you're motivated by the energy transition and want a role where your analytical work directly supports one of the largest clean energy portfolios in the country, we'd love to hear from you.

*This job posting is open to Scottsdale, San Diego, Houston, Denver, and San Francisco offices*

If you don’t meet 100% of the qualifications but see yourself contributing, please submit your resume

What You'll Be Doing

• Develop and maintain bottom-up cost estimating models for wind, solar, and storage assets across all project phases (greenfield, operating, repower, and M&A).
• Use statistical and forecasting tools to model maintenance spend and equipment risk profiles.
• Collaborate with internal stakeholders (O&M, engineering, procurement, FP&A) to validate O&M cost assumptions.
• Support internal teams (business development, procurement, O&M, capital market, etc.) with data requests, cost breakdowns, and scenario analysis.
• Assist in preparing cost assumptions for annual budgeting and long-range planning processes.
• Analyze historical O&M costs to identify trends, cost drivers, and opportunities for efficiency.
• Develop and enhance Power BI dashboards to connect multiple data streams and visualize key model inputs and outputs.
• Use AI tools to automate routine data processing tasks and extracting key commercial data from contracts

What You'll Bring

• Bachelor’s degree in Engineering, Business, Finance, or other applicable fields.
• 4+ years of experience in renewable energy, power generation, or infrastructure.
• Understanding of renewable energy plant operations (solar, wind, or BESS).
• Demonstrated experience in operations support role in development of creative solutions to operating challenges.
• Excellent communication and stakeholder management skills across technical, legal, and financial disciplines.
• Strong analytical and project management capabilities; attention to detail and risk awareness.

What Would Be Nice

• Familiarity with lifecycle cost analysis and predictive maintenance modeling.
• Experience working with large datasets or forecasting tools.
• Familiarity with renewable project finance and typical counterparty and Independent Engineer requirements
• Advanced Microsoft Excel, Word and PowerPoint skills. Proficiency in data analytics tools (Power BI, Tableau, SQL, or Python).

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Hybrid

Summary:

We are seeking a highly skilled Civil Engineer to join our team.  This role involves providing technical guidance, developing designs, and overseeing engineering projects that support a wide range of facilities and infrastructure. The successful candidate will have expertise in civil systems, including structural, hydrologic, traffic, sanitary, utility, and foundation construction.  (Site development, Structural, Utilities and Bridge experience).

Responsibilities:

• Develop preliminary and final designs, design analysis, technical specifications, and cost estimates for new construction, modifications, and repairs.
• Create designs for buildings, water supply systems, distribution and storage systems, storm drainage systems, and other facilities.
• Provide professional advice and technical assistance to directorate personnel and tenants.
• Investigate and analyze specific engineering problems and provide solutions to meet performance standards.
• Analyze civil/structural needs, conduct calculations, and select systems based on available funds, energy conservation, pollution control standards, and preservation requirements.
• Coordinate with architects and engineers from other disciplines to ensure project compatibility and integration.
• Review plans and specifications prepared by architects, engineers, for adequacy and feasibility.
• Investigate and resolve technical problems during project construction and collaborate with contractors and manufacturers.
• Participate in final on-site inspections for specialty and unique facilities.
• Conduct inspections of various facilities to ensure structural integrity and compliance.

Required Qualifications:

• Bachelor's degree in Civil Engineering or related field such as Construction Engineering, with 7-10+ years of experience.
• Broad professional knowledge of engineering theories, concepts, principles, and standards.
• Ability to determine and execute actions for complex assignments.
• Skill in researching, analyzing, testing, and evaluating information to devise efficient and feasible solutions.
• Knowledge of energy conservation, pollution control standards, and preservation of historic sites requirements.
• Expertise in managing engineering projects and providing technical oversight and direction.
• Proficiency in English and strong communication skills for preparing and presenting plans, designs, reports, and recommendations.
• Citizen of the United States.
• Top Secret / Sensitive Compartmented Information (TS/SCI) security clearance or ability to obtain an interim Secret security clearance within six months of employment.
• Ability to travel (25%).

#Ll-Onsite 

If you're a PE-licensed engineer who wants real ownership over high-profile projects — not just a seat at the table, but the head of it — this role was built for you.

At Atwell, we don't hand you a project and wish you luck. We give you the autonomy, the team, and the resources to drive outcomes that shape how communities are built and experienced for decades.

————————————————
What You'll Own
————————————————

- Full-cycle delivery of residential and commercial land development projects — from proposal to closeout
- Budgets, scopes, contracts, and schedules with real accountability
- Complex engineering and permitting challenges with the autonomy to influence direction
- Client relationships and external representation for Atwell
- A project team you'll mentor, develop, and lead

————————————————
What You Bring
————————————————

- PE license (required)
- Bachelor's in Civil Engineering or related field
- 6+ years in residential and/or commercial land development
- Deep knowledge of local codes, permitting, and construction practices
- Experience leading multidisciplinary teams and managing client expectations
- Familiarity with tools like Vision, Newforma, or Buzzsaw

————————————————
Why Atwell?
————————————————

- Work that leaves a mark — projects that shape communities for generations
- A clear path to senior leadership as your responsibilities grow
- High-performing, collaborative culture with colleagues who push you to be better
- Freedom to make technical decisions that matter

Disclaimer 

While AI tools may support your application process, this role is built on human talent. Your judgment, experience, and character matter most, so we encourage you to showcase what makes you uniquely you.

Atwell does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any Atwell employee. Resumes from approved vendors must be specifically requested by Atwell and approved by the Atwell Talent Acquisition Team.

#LI-BL1

Job Summary: At LG Energy Solution Arizona, Inc., the Engineer II – IT MES Process Innovation will play a key role in advancing smart manufacturing initiatives by supporting and improving Production IT systems, including the Manufacturing Execution System (MES), data analysis platforms, and reporting tools. This role partners with production, engineering, and IT teams to analyze manufacturing processes, implement system enhancements, and support IT solutions aligned with user requirements and business and process changes, driving continuous improvement and operational efficiency across manufacturing operations.

Report To: Sr. Manager, Process Innovation

Responsibilities:
• Analyze manufacturing processes and identify opportunities for system enhancements within Production IT systems, including the MES.
• Design, configure, and implement MES and production system improvements to enhance manufacturing efficiency, system performance, and operational visibility.
• Collaborate with production, engineering, and IT teams to develop and deploy technology solutions that optimize manufacturing processes and support evolving operational requirements.
• Troubleshoot system issues impacting production operations and Smart Factory systems, performing root cause analysis and implementing corrective actions to maintain system reliability.
• Monitor and optimize system integration and data flow across MES, WMS, and ERP platforms to improve data consistency, inventory accuracy, and system performance.
• Execute IT initiatives and system enhancement projects that support digital manufacturing and smart factory capabilities.
• Partner with global engineering teams and headquarters stakeholders to align system capabilities with manufacturing process improvements and business requirements.
• Coordinate with internal teams and external technology vendors to implement and maintain IT equipment, software solutions, and system configurations supporting manufacturing operations.

Qualifications:
• Bachelor's Degree in Computer Science, Information Technology, Industrial Engineering or a related field.
• 3+ years of experience in Information Technology, Manufacturing Systems, or related technical environments.
• Experience supporting or implementing Manufacturing Execution Systems (MES) and ERP systems (e.g., SAP) in a manufacturing environment.
• Experience working on data analysis initiatives and production system improvement projects.
• Understanding of manufacturing processes and production systems and their integration with IT solutions.
• Knowledge of IT best practices, including system architecture, programming concepts, and cybersecurity principles.
• Ability to work flexible hours when required to support production operations and collaborate with global teams and headquarters stakeholders.

Skills:
• Strong communication and cross-functional collaboration skills.
• Experience working with data analysis and reporting tools to support operational decision-making.
• Familiarity with project management tools and methodologies.
• Programming and data visualization experience with tools such as Python, SQL, and Power BI preferred.
• Knowledge of AI or advanced analytics solutions preferred.
• Proficiency in Microsoft Office Suite.

Your Impact

Law enforcement agencies need training systems informed by real data about how officers perform in the field. We've spent the last few years collecting that data and validating the data products that create actionable insights that trainers can use to make encounters more effective, less injurious, and safer for everyone involved. We've shipped the simple models, but now we need to get our customer-validated models into production. Your job is not just to ship them, but to ensure that we have a strategic pipeline to continue delivering data products for our customers for years to come. What works in research needs to be production-grade, reliable, and reusable.

We're a small, technically deep team embedded in Axon's TASER pillar. Our work spans hardware telemetry and behavioral science — we analyze TASER device data, build models that drive training recommendations for law enforcement agencies, and ship the analytical tools that get those insights to the people who can act on them. Our analyses reach the C-suite. Our models become user-facing features. We're working toward Axon's Moonshot: reduce fatal officer-involved shootings by 50% in the next decade.

The head of product was a Staff Engineer. Our TPM ran a 60-person engineering organization. Both product managers have quantitative degrees — applied mathematics and engineering. Our program manager for TREND is a former state police lieutenant with over 30 years of experience in law enforcement. Our designer is part of the team, not separated from it. We built this team to cover the full space — engineering, data, product, and domain — and this hire is the next deliberate addition.

This is the opposite of a silo — and it comes with a tradeoff: you won't always have another SWE in the room, so you'll need to be technically self-sufficient. What you get in return is a team with more depth of experience per person than most engineering environments you've worked in.

What You’ll Do

Location: This role is based out of one of our US-based offices (Seattle or Scottsdale) and follows a hybrid schedule. We rely on in-person collaboration and ask that team members work onsite Tuesdays through Fridays, with the flexibility to work remotely on Mondays, unless there is an approved workplace accommodation.
Reports to: Director, TASER Data Science

• Build and ship data products: dashboards, metrics systems, and recommendation tools that drive real decisions
• Own production ML deployment — bring models from research to reliable production systems with monitoring, versioning, and operational rigor
• Build and own data pipelines from TASER device telemetry through to analytics surfaces used by agencies and internal stakeholders
• Set technical direction for the team's engineering practices — the data scientists here write code and want to do it better; you'll be the senior engineering voice they've been missing
• Work across the full stack — device-side data ingestion through user-facing analytics — and move between projects to build breadth
• Use AI tools as a core part of your development workflow, not a novelty

What You Bring

Must-haves:

• You write production code at a high standard — strongly typed, comprehensively tested, designed for the people who will maintain it after you. We write Python like software engineers, not data scientists.
• You've deployed and operated ML systems in production: model serving, monitoring, failure handling, and the operational rigor that keeps them running
• You identify the most important technical work and go after it — you've shaped technical roadmaps, influenced peers and organizational direction, and moved goals forward with or without explicit direction
• You define the problem as much as you solve it — you thrive in a team where requirements evolve as you learn, and you see that as a feature, not a bug
• You've worked with real-world messy data: device logs, behavioral data, event streams, or similar

Strong preferences:

• Advanced degree in a quantitative or analytical field — PhDs are very welcome, we already have three
• Intellectual background outside computer science is genuinely valued here: statistics, physics, engineering, biology, economics, linguistics, philosophy — it doesn't have to be a "hard science." We hire for intellectual diversity because it makes the work better.
• Hands-on experience with ML production tooling: model registry, serving infrastructure, pipeline orchestration, and model monitoring
• Experience with cloud data platforms in an ML context (Azure ML, Databricks, Snowflake) and batch or streaming pipeline architecture
• Experience with hardware-adjacent data: device telemetry, IoT event logs, or similar

Benefits that Benefit You

• Competitive salary and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• Employee Resource Groups (ERGs)
• And yes, we have snacks in our offices

Benefits listed herein may vary depending on the nature of your employment and the location where you work.

** This position is not eligible for visa sponsorship for external candidates. Candidates cannot require sponsorship now or in the future**

Job’s mission

Our Global Sales, Services & Spares IQ and Sustaining teams are seeking Snr Engineers I & II, Field Service (level will depend on experience, degree and responsibilities. Please review below) to join ASM at a customer site (Intel) in Chandler, AZ. Domestic and International travel of at least 25% will be required for this role. As a Senior Field Service Engineer at ASM, you’ll play a critical role in supporting the advanced semiconductor equipment that powers the world’s most transformative technologies. You’ll take the lead on complex troubleshooting, guide and mentor engineers, and strengthen our partnerships by helping customers achieve stable, high‑performance fabrication environments. Your expertise will make a direct impact on tool reliability, customer satisfaction, and the next generation of ASM technology.

Shifts available:

• Shift 4 (6pm-6am)- Sun-Tu and every other Saturday
• Shift 5 (6am-6pm)- Sun- Tue and every other Wednesday 
• Shift 6 (6pm- 6am)- Wed-Fri and every other Saturday
• Shift 7 (6am- 6pm)- Wed-Sat and every other Wednesday

What you will be working on

Senior Engineer I, Field Service

• Install, maintain, and repair ASM semiconductor equipment with minimal supervision
  • Lead troubleshooting of complex tool or process issues using structured diagnostic methods
  • Perform root‑cause analysis and recommend targeted, data‑driven corrective actions
  • Review tool‑performance data to identify trends, risks, or improvement opportunities
  • Provide technical guidance and on‑the‑job coaching to less‑experienced engineers
  • Document service activities and support updates to procedures and best practices
  • Communicate solutions, progress, and expectations clearly with customer engineers
  • Participate in escalations alongside cross‑functional ASM engineering teams

Senior Engineer II, Field Service

• Serve as the senior technical lead for equipment installation, performance optimization, and recovery
• Diagnose and resolve highly complex, multi‑factor tool and process issues with limited guidance
• Lead advanced root‑cause analysis and drive long‑term corrective‑action plans that influence global engineering improvements
•  Own the customer‑technical relationship: build trust, anticipate operational needs, and act as ASM’s senior technical representative onsite
• Manage escalations end‑to‑end, aligning expectations, coordinating cross‑functional teams, and communicating clear action plans
• Guide, mentor, and develop engineers through hands‑on instruction, structured training, and knowledge‑sharing
• Champion best practices and contribute to procedure development, improvements, and field‑wide learning
•  Provide detailed field insights to R&D, product, and design teams, including support for beta tools or early‑option deployments

What we are looking for

Senior Engineer I, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 6+ years of experience, OR a Master’s degree with 4+ years of experience OR PhD degree with 0+ years of experience.
• Experience of semiconductor field service or capital‑equipment experience
• Ability to interpret electronic and electromechanical schematics
•  Experience with structured troubleshooting methodologies
• Knowledge of cleanroom and semiconductor safety protocols
• Strong written and verbal communication skills
• Ability to work independently and collaboratively in fast‑paced fab environments
• Willingness to travel domestically and internationally (minimum 25%)
• Proficiency in MS Office

Senior Engineer II, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 8+ years of experience, OR a Master’s degree with 6+ years of experience OR PhD degree with 4+ years of experience.
• Experience in semiconductor field service experience with demonstrated technical leadership
• Advanced knowledge of tool architecture, control algorithms, and multi‑factor troubleshooting
• Experience driving structured root‑cause analysis and long‑term corrective‑action plans
• Proven ability to lead escalations and manage customer‑technical relationships
• Strong communication and mentorship capabilities
• Ability to work autonomously while guiding and developing other engineers
• Willingness to travel domestically and internationally
• Proficiency in MS Office

What sets you apart

Senior Engineer I, Field Service

• Experience supporting beta tools or early‑option equipment
• Knowledge of wafer‑fab operations, robotics, vacuum systems, plasma, RF, or gas handling
• Experience writing or updating procedures or technical documentation
• Strong customer‑service approach and organizational skills
• Familiarity with structured problem‑solving methods

Senior Engineer II, Field Service

• Demonstrated leadership in complex troubleshooting programs or technical initiatives
• Experience owning customer‑technical relationships, including expectations and long‑term partnership building
• Strong capability in mentoring and developing field engineers
• Hands‑on expertise with fab robotics, vacuum systems, plasma, RF, or gas‑delivery systems
• Experience providing structured feedback to engineering or product teams
• Experience evaluating or supporting beta‑stage or early‑option tools

As a Field Service Engineer, you’ll bring the technical discipline, precision, and equipment expertise you developed in the military to support ASM’s advanced semiconductor tools and help our customers keep their fabs running at peak performance. You’ll work with the same mindset you relied on in mission‑critical environments—applying your engineering background and real‑world troubleshooting experience to technologies that power AI, 5G, cloud computing, and next‑generation devices. This is a chance to leverage the skills you gained maintaining complex systems in the field and continue building your technical mastery in a rapidly growing, high‑tech industry. 

In this role, you’ll operate at the center of cutting‑edge semiconductor manufacturing. It’s an ideal opportunity for veterans and transitioning service members who have supported sophisticated mechanical, electrical, or electronic systems and want to apply that expertise in a world‑class technology environment where every day brings new challenges to solve. 

From day one, you’ll receive structured training and hands‑on guidance from experienced engineers onsite. You’ll work with vacuum systems, plasma, chemical delivery, robotics, sensors, advanced metrology, and complex hardware‑software interactions—equipment that will feel familiar if you’ve maintained avionics, electronics, propulsion, navigation, comms, radar, robotics, or similar military systems. Your contributions will directly impact tool performance, system uptime, and customer success, forming a strong foundation for long‑term growth and a variety of career paths within ASM. 

Shifts available:

• Shift 4 (6pm-6am)- Sun-Tu and every other Saturday
• Shift 6 (6pm- 6am)- Wed-Fri and every other Saturday

What you will be working on 

• Install, maintain, troubleshoot, and repair ASM semiconductor equipment at customer sites
• Diagnose mechanical, electrical, and process issues in collaboration with senior engineering staff
• Deliver responsive, customer‑focused service with a strong commitment to safety and operational discipline
• Working in cleanroom environments while following strict safety and quality standards
• Assisting, identifying and contributing to continuous improvement efforts 
• Participate in escalations and cross‑functional problem‑solving
• Work on an assigned shift schedule supporting 24/7 manufacturing operations

What we are looking for 

• Bachelor’s or master’s degree in Mechanical Engineering, Electrical Engineering, Electromechanical Engineering, or related field
• Hands-on technical experience maintaining, repairing, or troubleshooting complex mechanical, electrical, or electronic systems
• Proven ability to diagnose complex system faults, follow technical procedures with precision, and maintain equipment in mission‑critical environments 
• Experience working under strict safety protocols, lock‑out/tag‑out procedures, and high‑reliability operational standards
• Comfort working in shift-based environments where readiness, accountability, and teamwork are essential
• Demonstratedability to stay calm under pressure, adapt quickly to changing conditions, and take ownership of equipment performance in demanding situations 
• Ability to read and interpret electronic and electromechanical schematics
• Strong troubleshooting skills and disciplined adherence to safety
• Ability to work in a cleanroom environment
• Clear and effective written and verbal communication
• Ability to work independently and collaboratively
• Willingness to travel domestically and internationally
•  Proficiency with Microsoft Office 

What sets you apart 

• Experience with equipment, gas handling, or high‑precision machinery
• Experience writing or updating technical documentation
• Background in customer‑facing or technical support roles
• Familiarity with structured problem‑solving, data analysis, or statistical methodologies
• Military experience such as Avionics Technician, Electronics Technician, Nuclear Machinist Mate, Satellite/Communications Systems Technician, or similar specialties

Why join ASM?  

With us, you will have strong long‑term growth potential at the forefront of semiconductor technology. Your first role as an FSE is the foundation - not necessarily the finish line. With clear pathways into technical leadership, operations, product roles, program management, technical sales and process engineering, ASM gives you the flexibility to grow in the direction that fits you best in an industry that makes AI possible.  

2026 is the year to join ASM as a Field Service Engineer. Apply now! 

• Bachelor’s degree in Electromechanical Engineering or related field  
• 1–3 years of technical experience in field service, or manufacturing of OEM capital equipment
• Ability to read and interpret electronic and electromechanical schematics
• Basic knowledge of safety protocols and cleanroom guidelines
• Ability to apply rules and procedures in own activities
• Ability to fully understand tool architecture and control algorithms and explain operating principals to peers
• Clear written and verbal communication skills
• Ability to work independently and in a team
• Willing to travel up to as required for the role domestically and internationally
• Knowledge of safety procedures and cleanroom guidelines
• Proficiency with MS Office

Engineer II, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 4+ years of experience, or a Master’s degree with 0 years of experience
• Experience in field service or semiconductor capital equipment
• Ability to interpret electronic and electromechanical schematics
• Experience with structured troubleshooting methodologies
• Knowledge of cleanroom and semiconductor safety protocols
• Strong communication skills, both written and verbal
• Ability to work independently and within a team
• Willingness to travel domestically and internationally
• Proficiency with MS Office

What sets you apart

Engineer I, Field Service

• Semiconductor field service or capital equipment experience
• Knowledge of wafer fab operations, robotics, vacuum systems, plasma, or gas handling
• Experience writing procedures or process documentation
• Strong customer‑service mindset and organizational skills
• Familiarity with structured problem‑solving methods
• Experience supporting escalations or beta‑site activities

Engineer II, Field Service

• Hands‑on semiconductor field service experience
• Working knowledge of wafer fab operations, robotics, vacuum systems, plasma, RF, or gas handling
• Experience leading structured root‑cause analysis
• Experience providing field data to engineering or design teams
• Background supporting beta‑stage or early‑option tools
• Familiarity with structured problem‑solving techniques
• Strong customer‑service mindset and organizational skills

What You'll Be Doing:

As an experienced Project Engineer, you will work on site/civil engineering and land development projects. This person will actively participate in the growth of our firm.

Technical Proficiency:

• Demonstrate technical excellence in engineering principles and practices.
• Possess expertise in designing potable water and wastewater distribution systems, surface water management systems, site grading, roadway design, and related land development projects.

Project Lifecycle Management:

• Take projects from entitlements through to construction, ensuring successful project execution.
• Manage and coordinate various aspects of project development.

Permitting and Entitlements:

• Efficiently process multiple permitting entitlements across various governmental agencies.
• Utilize local experience to streamline the permitting process.
• Implement complex permitting strategies to meet project schedules, ranging from large-scale developments to compact commercial infills.

Client Relationship and Company Growth:

• Actively participate in company marketing efforts to enhance our company's profile and foster relationships with existing and future clients and governmental agencies.
• Contribute to the growth of the company by delivering high-quality projects and client satisfaction.

Qualifications: 

• Bachelor’s Degree in Civil Engineering from an EAC/ABET Accredited University
• PE Licensure Required
•  AutoCAD Civil 3D, WaterCAD, StormCAD, and SewerCAD preferred.

Disclaimer 

While AI tools may support your application process, this role is built on human talent. Your judgment, experience, and character matter most, so we encourage you to showcase what makes you uniquely you.

Atwell does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any Atwell employee. Resumes from approved vendors must be specifically requested by Atwell and approved by the Atwell Talent Acquisition Team.

#LI-BL1

Atwell is seeking an experienced and driven Project Manager with a strong background in residential and commercial land development to lead high impact projects across diverse markets. If you're passionate about shaping communities through thoughtful design and want to take ownership of challenging, high-profile projects, this is your opportunity to thrive.

What You’ll Do:

• Lead full cycle project delivery from proposal to closeout in residential and commercial land development

• Collaborate with clients, internal teams, and leadership to ensure success, profitability, and technical excellence

• Oversee project budgets, proposals, contracts, scopes, and schedules

• Mentor and direct project teams; promote internal communication and knowledge sharing

• Maintain strong client relationships and represent Atwell in all external communications

• Tackle complex engineering and permitting challenges with the autonomy to influence project direction and outcomes

What You Bring:

• Professional Engineer (PE) license required

• Bachelor’s degree in Civil Engineering or a related discipline

• 4 plus years of experience in residential and/or commercial land development

• Deep understanding of local development codes, permitting processes, and construction practices

• Experience managing multidisciplinary teams and client expectations

• Proficiency with project management tools like Vision and familiarity with document management platforms (e.g. Newforma, Buzzsaw, etc.)

Why Atwell?

• Be part of a firm that values collaboration, creativity, and client focus

• Lead meaningful work that shapes the future of land development and improves the way communities grow

• Work alongside industry leading professionals in a supportive and high performing culture

• Enjoy a clear path for career advancement, with opportunities to evolve into senior leadership as you take on increasing responsibility

• Gain the freedom to drive your own projects and make technical decisions that matter

Disclaimer 

While AI tools may support your application process, this role is built on human talent. Your judgment, experience, and character matter most, so we encourage you to showcase what makes you uniquely you.

Atwell does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any Atwell employee. Resumes from approved vendors must be specifically requested by Atwell and approved by the Atwell Talent Acquisition Team.

#LI-JK1

Atwell is seeking an experienced and driven Project Manager with a strong background in residential and commercial land development to lead high impact projects across diverse markets. If you're passionate about shaping communities through thoughtful design and want to take ownership of challenging, high-profile projects, this is your opportunity to thrive.

What You’ll Do:

• Lead full cycle project delivery from proposal to closeout in residential and commercial land development

• Collaborate with clients, internal teams, and leadership to ensure success, profitability, and technical excellence

• Oversee project budgets, proposals, contracts, scopes, and schedules

• Mentor and direct project teams; promote internal communication and knowledge sharing

• Maintain strong client relationships and represent Atwell in all external communications

• Tackle complex engineering and permitting challenges with the autonomy to influence project direction and outcomes

What You Bring:

• Professional Engineer (PE) license required

• Bachelor’s degree in Civil Engineering or a related discipline

• 4 plus years of experience in residential and/or commercial land development

• Deep understanding of local development codes, permitting processes, and construction practices

• Experience managing multidisciplinary teams and client expectations

• Proficiency with project management tools like Vision and familiarity with document management platforms (e.g. Newforma, Buzzsaw, etc.)

Why Atwell?

• Be part of a firm that values collaboration, creativity, and client focus

• Lead meaningful work that shapes the future of land development and improves the way communities grow

• Work alongside industry leading professionals in a supportive and high performing culture

• Enjoy a clear path for career advancement, with opportunities to evolve into senior leadership as you take on increasing responsibility

• Gain the freedom to drive your own projects and make technical decisions that matter

Disclaimer 

While AI tools may support your application process, this role is built on human talent. Your judgment, experience, and character matter most, so we encourage you to showcase what makes you uniquely you.

Atwell does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any Atwell employee. Resumes from approved vendors must be specifically requested by Atwell and approved by the Atwell Talent Acquisition Team.

#LI-BL1

Sr. Principal Engineer, Systems (Plasma & Multi-Scale Simulation Scientist)

Simulation and Modeling Hub 

Role Summary 

We are seeking a Senior Plasma & Multi-Scale Simulation Scientist to strengthen and expand plasma modeling capabilities within the Simulation and Modeling Hub (S&M-Hub). This role focuses on bridging plasma physics, surface chemistry, and feature-scale behavior to enable predictive, physics-based simulation workflows supporting advanced semiconductor process development (PEALD, PECVD, ALE, RIE). 

Key Responsibilities 

• Develop and apply plasma simulation models (fluid and hybrid CCP/ICP) 

• Bridge multiple scales including plasma–surface interactions, molecular/first-principles insights, and feature-scale behavior 

• Integrate plasma modeling with CFD, thermal, and multi-physics simulations 

• Collaborate with experimental teams to validate models using in-situ and ex-situ diagnostics 

• Translate modeling insights into actionable process and equipment guidance 

• Contribute to S&M-Hub roadmap development, best practices, and advanced modeling workflows 

Required Qualifications 

• Ph.D. in Applied Physics, Plasma Physics, Materials Science, Chemical Engineering, or related field 

• Strong background in plasma-assisted semiconductor processes (PEALD, PECVD, ALE, RIE) 

• Demonstrated experience in computational plasma modeling 

• Ability to connect fundamental modeling with experimental validation and manufacturing relevance 

Preferred Qualifications 

• Experience with first-principles, molecular dynamics, or surface reaction modeling 

• Exposure to feature-scale or device-relevant plasma simulations 

• Familiarity with multi-physics coupling and reduced-order (ROM) or hybrid modeling approaches 

• Experience in industrial R&D or advanced technology development environments 

Our Atomic Layer Deposition (ALD) Chamber Engineering team is seeking innovative and driven and experienced Mechanical Engineers to join their teams. Our ALD and team is at the forefront of developing cutting-edge technologies. As a Mechanical Engineer at ASM, you will contribute to designing, developing, and optimizing high-precision equipment. Collaborating with cross-disciplinary teams, you will play a critical role in solving complex engineering challenges, ensuring product reliability, and driving technological advancements. 

Responsibilities:

• Apply sound engineering principles, product specifications and research data to create designs for systems and products for semiconductor industry.
• Perform engineering calculations including structural, thermal and fluid dynamics problems
• Create and revise Creo Parametric CAD models and detail drawings, ranging in complexity from simple piece parts to large assemblies
• Determine feasibility of product proposals, resolve problems based on technical inputs and develop new designs maintaining product design safety criteria. Apply statistics to optimize and deliver “first time right” designs.
• Prepare product/system designs and related engineering documentation for the manufacturing and testing of prototype and production released products. The documentation shall be complete and easy to follow.
• Project management duties include report generation, schedule creation and maintenance, design reviews and interdepartmental coordination.
• Provide assistance in establishing product configuration and structures on new products and features in both development and manufacturing environments.
• Present and participate in design reviews for unique customer driven specials, product enhancements and other new designs.
• Create, manage and execute engineering project plans, including task scheduling with Gantt charts and resource and cost estimates,
• Travel to customer sites/supplier sites to participate in technical discussions.
• Assist marketing and vendors in preparation of cost estimates dealing with nonstandard options, new system features and product enhancements. 
• Support projects in conjunction with technical staff, managers and manufacturing groups. Support development, installation and testing of hardware to verify performance. Create test plans, verify and approve test procedures. 
• Interface with other organizations on new product updates and ensure a smooth transition of the product into the manufacturing cycle.
• Evaluate change requests and complete all aspects of engineering change orders.

Qualifications:

• Masters in Mechanical Engineering or related degree, PhD strongly preferred. 
• Experience in engineering, design, and development of complex mechanical systems including: reactors, vacuum chambers, gas delivery systems, pneumatics, water cooling circuits, and vacuum systems required.

Skills:

• Semiconductor capital equipment or heavy capital equipment preferred.
• Deposition product knowledge a plus (CVD, ALD, EPI, PVD)
• Knowledgeable in the requirements for CE, NFPA, Semi S2-95 and other relevant standards as applicable to semiconductor manufacturing equipment.
• Understanding of materials: metals, plastics, surface coatings and surface finishes.
• Computer background in Microsoft applications, CREO and AutoCAD.
• Proficiency in ASME Y14.5 and/or ISO 1101:2017 preferred geometric dimension and tolerance
• Has knowledge of best practices and how own area integrates with others; recommends product and process improvements.
• Able to work with a diverse team to achieve requirements and specifications on complex projects.
• Capability to provide and maintain resource coordination and reporting, interfacing with other organizations and outside vendors on resource requirements.
• A critical thinker with proven ability to create effective solutions to complex engineering problems.
• Excellent verbal and written communication; ability to present design concepts to peers and management in a professional and effective manner.
• Ability to work in a team environment with aggressive deadlines and multiple priorities while maintaining a team player attitude.
• Perform self-inspection of all work and is responsible for ensuring that all work performed adheres to documentation requirements, company policies and procedures.

Your Impact 

As a Senior Software Engineer on Axon’s Robotics team, you’ll be at the forefront of transforming how law enforcement and military agencies deploy advanced robotic systems. You will work with a talented, fast-paced team focused on building the Android-based software application that will run on Axon’s Ground Control Station (GCS) used by operators to interact with advanced ground and air robots. You will work to solve challenging problems and provide simple and elegant solutions to complex customer needs that will have a direct impact on saving lives. You’ll architect and lead critical software features for advanced robotic command and control, AI, video livestreaming, and data management.

Here, you’ll collaborate with a variety of engineers, product visionaries, and designers to push the boundaries of mobile robotics software and deliver a best-on-class solution to customers. This is your chance to work on something that combines technical complexity with meaningful impact. If you're driven by solving intricate technical problems, passionate about Android development, and ready to play a crucial role in shaping a product that redefines public safety, we want you on our team. Help us build a platform that truly makes a difference in protecting life, truth, and justice.

What You’ll Do

Location: Scottsdale, AZ
Reports To: Engineering Manager

• Lead engineering architecture and design reviews to ensure high standards in software quality.
• Collaborate with the Axon product design team to turn mobile UI designs into functional, engaging solutions.
• Drive the entire mobile software lifecycle, from prototyping to commercialization and post-launch support.
• Interface with cloud services for seamless integration across platforms.
• Set a high technical standard for the team through code and design reviews.
• Mentor engineers, fostering growth and technical skill development within the team.
• Partner with Product, Design, and Engineering teams to deliver integrated solutions that meet customer needs.
• Enhance engineering processes, including sprint planning, stand-ups, and long-term planning.
• Build robust and reliable mission critical software that meets high standards for stability in mission-critical applications.
• Collaborate closely with other groups to align on goals, ensuring we deliver impactful and innovative solutions.

What You Bring

• 6+ years of industry experience shipping Android applications to the Google Play Store.
• Understand the ins and out of mobile phones; expected to lead mobile design reviews as well as the implementation of their designs to release and post-release monitoring
• Experience with modern architecture (MVVM, MVI, etc) including unit testing
• Android experience with Retrofit, Coroutines, Okhttp, Hilt, Jetpack Compose
• Experience working with remote data via REST and JSON
• Understanding and experience with networking protocols such as TCP, UDP, DHCP, DNS, Server-Sent-Events, Websockets (debugging with Wireshark or Charles a plus)

Benefits that Benefit You

• Competitive salary and 401k with employer match
• Discretionary time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Development Programs
• And yes, we have snacks in our offices

This role is based out of our Scottsdale office and follows a hybrid schedule. We rely on in-person collaboration and ask that team members work onsite Tuesdays through Fridays, with the flexibility to work remotely on Mondays, unless there is an approved workplace accommodation. We believe that connection fuels innovation, and our in-office culture is designed to foster meaningful teamwork, mentorship, and shared success.

As a Senior Engineer, Global Product Management at ASM, you’ll experience a dynamic and diverse scope of responsibilities that go beyond what’s typically offered at larger organizations. This role is ideal for someone who thrives in a fast-paced, intellectually stimulating environment and values autonomy, innovation, and cross-functional collaboration. 

You’ll be empowered to think creatively and strategically, working closely with global customers and internal teams to deliver cutting-edge solutions. Every day brings new challenges and opportunities to make a meaningful impact across the product lifecycle—from concept to commercialization. 

Key Responsibilities:  

• Product Lifecycle Management: Lead products from initial concept through high-volume manufacturing to end-of-life, ensuring alignment with market needs and business goals. 
• Roadmap Development: Own and maintain product roadmaps across a portfolio, updating regularly through customer insights and internal collaboration. 
• Product Definition: Own and maintain product structure, configuration, and options to support customer requests and efficient manufacturing execution.
• Customer Engagement: Drive technical discussions, create impactful presentations, and conduct detailed market and competitive analyses to support customer interactions.
• Market Requirements Specification (MRS): Develop and manage MRS documents to guide product development priorities and ensure alignment with customer expectations.
• Strategic Marketing: Craft go-to-market strategies, support executive R&D investment decisions, and develop high-level product strategy presentations.
• Financial Analysis: Collaborate with finance to assess product viability using NPV and IRR models; maintain cost-of-ownership frameworks.
• Business Planning & Market Analysis: Contribute to operational planning, business forecasting, and budget development through market intelligence and competitive analysis.
• New Product Introduction (NPI): Conduct market inflection analysis, develop business cases, align internal stakeholders, and position products for successful launch.
• Technical Collaboration: Partner with development teams to define specifications, manage demo requests, and prioritize product development efforts.
• Supplier Engagement: Build strategic supplier relationships to enable key capabilities for new products.
• Product Promotion: Create promotional content for conferences and product launches; deliver training and support to sales teams and customers. 

Requirements: 

• 3–10 years of experience in technical marketing within the semiconductor, capital equipment, or related industries 

• Advanced degree (Master’s or PhD) in Material Science, Electrical, Chemical, or Mechanical Engineering (or equivalent) 

• Strong background in semiconductor processes, hardware, or device technologies 

• Experience with ALD, CVD, Epi, or vacuum systems is a plus 

• Deep understanding of capital equipment systems and their applications 

• Proven track record of direct customer engagement and supplier management 

• Ability to collaborate across disciplines and manage a diverse product portfolio 

• Solid grasp of product lifecycle and technical marketing principles 

• Willingness and ability to travel globally 

Sr SWE -AI

Senior Software Engineer, AI Platform (Corporate AI Team)

Team & Role Overview

Axon’s Corporate AI Team sits within the Enterprise Data organization and focuses on internal-facing AI solutions that help Axon employees do more high‑value work with less manual effort. The team builds and operates Cortex, Axon’s internal AI platform that provides GPT‑class models, chat assistants, and secure integrations with systems like Quip, Jira, Slack, Microsoft 365, Snowflake, and more.
We’re looking for a Senior Software Engineer, AI Platform to help design, build, and scale this platform. In this role, you’ll:

• Own core services and integrations that power AI experiences for thousands of Axon employees.
• Collaborate with Corporate AI, Data Engineering, and business teams to turn real workflows into secure, reliable AI‑powered tools.
• Help define best practices and patterns for building production‑grade LLM and agentic workloads at Axon.

This is a hands‑on senior IC role—you’ll spend most of your time designing, coding, and operating production systems, not managing people.

What You’ll Do

Build and Evolve the AI Platform

• Design, build, and operate services that power Axon’s internal AI platform (Cortex), including chat experiences, agents, and integrations with enterprise systems.
• Implement and standardize patterns for deploying AI‑driven applications (APIs, web services, workflows, agents) across Axon’s cloud environments.
• Own and extend connectors and MCP integrations (e.g., Jira, Quip, Slack, M365, Snowflake) that allow LLMs to safely read and write data in Axon systems.
• Measure and improve reliability, latency, and cost for AI workloads, using telemetry and feedback from real users.

Deployment, Integration, and Reliability

• Drive the end‑to‑end lifecycle of new AI features—from prototype to hardened production service (design, implementation, testing, rollout, and operations).
• Evaluate new AI services (e.g., OpenAI, AWS Bedrock, Azure ML) for fit, performance, and cost; recommend and implement the right options for each use case.
• Implement monitoring, alerting, and auditing for AI services, ensuring we can trace usage, detect anomalies, and keep systems healthy in production.

Enablement, Best Practices, and Architecture

• Help define and document best practices for GPT/LLM solution development, including prompt engineering, RAG patterns, agentic workflows, and safe tool use.
• Partner with Corporate AI and Enterprise Architects to shape reference architectures for AI‑enabled apps and workflows (scalability, resiliency, observability, data access).
• Contribute to internal starter kits, training content, and templates that help other engineers and analysts build on the platform effectively.

Security, Governance, and Responsible AI

• Implement and maintain secure patterns for API key management, secrets, and access to models and data sources, aligned with Axon’s security and compliance standards.
• Work with Data, Security, and Governance partners to operationalize responsible AI guardrails—e.g., model selection, data minimization, logging, and usage controls.
• Ensure that new capabilities respect permissions, auditing, and policy requirements across systems like Jira, Quip, Slack, M365, and Snowflake.

Collaboration and Communication

• Collaborate closely with Data Engineering, Solution Architecture, and business teams (Finance, Sales, Operations, etc.) to turn real workflows into repeatable AI solutions.
• Clearly communicate design decisions, trade‑offs, and status to technical and non‑technical stakeholders.
• Participate in brainstorming and discovery sessions to identify “big dumb problems worth solving” with AI and automation.

What You Bring

• Bachelor’s degree in Computer Science, Engineering, or a related field, or equivalent practical experience.
• 4+ years of professional software engineering experience, including building and operating production services or platforms.
• Strong proficiency in at least one of: Python, TypeScript/JavaScript, or Java.
• Experience with at least one major cloud provider (AWS, Azure, or GCP) and comfort working with cloud‑native services (functions, containers, managed databases, queues, storage).
• Solid understanding of web service fundamentals (APIs, authentication/authorization, observability, CI/CD) and how to build reliable, maintainable systems.
• Demonstrated interest in AI/ML and LLMs—for example, integrating with OpenAI, Bedrock, or similar APIs; building GPT‑style apps; or using AI‑assisted development tools.
• Basic understanding of security best practices (secrets management, least‑privilege access, audit logging) and eagerness to deepen this in the context of AI platforms.
• Strong communication and collaboration skills, with comfort working in a fast‑moving, experimental environment.

Preferred Experience

You don’t need all of these, but experience in several of the following will help you ramp quickly:

• Hands‑on work with LLM platforms and tools, such as OpenAI (ChatGPT / APIs), AWS Bedrock, Azure OpenAI, or Azure ML Studio.
• Experience integrating with enterprise systems like Jira, Confluence/Quip, Slack, M365, Salesforce, or Snowflake—especially via APIs or connectors.
• Familiarity with RAG (Retrieval‑Augmented Generation), semantic search, or vector stores in production contexts.
• Exposure to DevOps / platform engineering: Terraform or similar IaC, GitHub Actions or other CI/CD systems, containerization (Docker, Kubernetes), and application monitoring stacks.
• Experience building internal platforms or self‑service tools used by multiple teams.
• Participation in enablement activities (internal trainings, office hours, documentation, or community programs like Axon’s Champions Circle) is a plus.

As a Senior Engineer II, Mechanical Engineering at ASM, you will play a pivotal role in design and development of high‑precision ALD chamber and semiconductor equipment systems. In this role, you will apply solid mechanical engineering fundamentals to solve complex design challenges, support new product development, and ensure reliable transition from design to manufacturing. Working closely with cross‑functional teams, you will help drive product quality, performance, and innovation. 

What you will be working on 

• Design and develop mechanical systems and components for semiconductor equipment, applying sound engineering principles, product specifications, and research data. 
• Perform engineering calculations related to structural, thermal, and fluid dynamics to support robust and reliable designs. 
• Create and maintain Creo Parametric 3D CAD models and detailed drawings, ranging from individual parts to complex assemblies. 
• Evaluate the feasibility of product proposals, resolve technical issues, and develop new designs in compliance with product safety and design standards. 
• Manage Continuous Improvement Projects (CIPs) and ensure clear communication across teams and with external partners. 
• Prepare complete and clear engineering documentation to support prototype builds, manufacturing, and testing of released products. 
• Support engineering project activities, including report preparation, schedule planning, design reviews, and coordination with cross‑functional teams. 
• Establish product configurations and structures for new products and features in both development and manufacturing environments. 
• Participate in and present at design reviews for new designs, product enhancements, and customer‑specific solutions. 
• Support hardware development, installation, and testing to verify performance; create, review, and approve test plans and test procedures. 
• Interface with manufacturing, suppliers, and other engineering teams to ensure smooth product transfer into the manufacturing cycle. 
• Review and process engineering change requests (ECR/ECO) and support continuous product and process improvements. 
• Travel to customer or supplier sites as needed to support technical discussions and project execution. 
• Maintain a strong commitment to safety in all activities. 

What we are looking for 

• Master’s degree in mechanical engineering or related disciplines. 
• Several years of hands‑on experience in mechanical design and development of complex systems within semiconductor or capital equipment industries. 
• Practical experience with mechanical systems such as vacuum chambers, reactors, susceptor heaters, gas delivery systems, pneumatics, cooling circuits. 
• Ability to perform simulation and engineering analysis (e.g., structural, thermal, fluid dynamics) to support robust and reliable designs. 
• Proficiency in Creo (or equivalent CAD tools) and ability to create detailed engineering drawings 
• Solid understanding of materials, manufacturing processes, and mechanical design fundamentals. 
• Strong problem‑solving skills and the ability to work effectively in a cross‑functional, fast‑paced environment. 

What sets you apart 

• PhD in Mechanical Engineering or related degree.  
• Experience with semiconductor deposition equipment (ALD, CVD). 
• Strong capability to run and interpret Multiphysics simulations (structural, thermal, CFD) and apply the results to improve design specifications. 
• Experience with Susceptor heaters, Vacuum and electrostatic chucks. 
• Proficiency in GD&T standards (ASME Y14.5 and/or ISO 1101). 
• Experience supporting products through the full lifecycle, from concept and design to manufacturing release. 
• Ability to independently manage technical tasks while contributing effectively as a team player. 

The Key Account Technologists are the ASM product experts who support extensive customer and internal company contacts while driving the introduction of new products, product improvements, and product modifications.  As a Key Account Technologist (KAT) you'll help to expand product market share by helping win development tool of record (DTOR) selections and supporting competitive process application performance of the installed base. Further, the role requires someone who is not only skilled in R&D/Innovation, development, engineering, and design for manufacturability, but also someone who can be a key team member developing and delivering the ALD technology roadmap. This role requires interactions and communication between the product development team and the customer to ensure customer issues and concerns are being addressed with solutions and timelines.  A persistent approach to Product Life Cycle (PLC) will also be required to achieve strong engagement with the new product development team. This position requires Korean, Japanese or Mandarin language skills.

RESPONSIBILITIES:

• Responsible for process application NPI (New Product Introduction), product improvements, and product modifications for key product unit (KPU) installed base
• Develop and maintain relationships with key customers.
• Responsible for managing all the technical account aspects of customers
• Responsible for resolution of process and hardware-related escalations in the field
• Responsible for defining, maintaining, and implementing BKM process for all process applications – including standards, specs, and recipes, installed base performance
• Support highly engaged working relationship between KAT department, ASM’s customer account teams and customers’ engineers to ensure all customer needs and requirements are understood and addressed
• Drive close cooperation with multiple internal stakeholders, especially with Process Development teams, Global Sales, Service and Spares, Account Teams, Engineering and Global Product Management (GPM)

Key SELECTION CRITERIA:

• Excellent Korean, Japanese, or Mandarin language skills, both written and spoken
• 5+ years (or 3+ years with Ph.D.) experience in the semiconductor wafer processing or capital equipment industry
• Master’s degree (or above) in material science, physics, chemical, mechanical or electrical engineering, or related field
• Related work experience can include process engineering, technical marketing, or product support
• Proven ability to drive continuous improvement across operations
• Able to build long term relationships of trust with customers
• Strong written and verbal communication skills including excellent presentation and influencing skills
• Semiconductor experience should be primarily focused on atomic layer deposition (ALD) or chemical vapor deposition (CVD).
• Experience in work function, metallization, silicides, and electrodes in logic or memory is preferred

PERSONAL / professional ATTRIBUTES:

• Self-starter with high energy and strong work ethic
• Highly motivated and results driven
• A proactive change agent
• A strategic thinker with the ability to implement and drive tactics, strong at execution
• A problem solver – communication comes naturally when solving problems and addressing roadblocks.
• Able to independently make and execute decisions in a timely manner, leading people accordingly
• Ability to lead and influence others across cultures
• Highly collaborative and able to manage conflict

Travel:

• Flexibility to travel up to 30% of the time (internationally)

As a Senior Process Engineer at ASM, you will work with semiconductor processing and analytical equipment to research, develop and optimize processes focused on oxidation, annealing, curing, Atomic Layer Deposition (ALD) for logic, memory, analog, power, and MEMS applications. You will design and conduct complex experiments, measurements and perform the interpretation of complex experimental output. While you deliver creative and inventive solutions, technical publications, and generation of Intellectual Property (IP) are an essential function of this position. This position requires Korean, Japanese or Mandarin speaking skills.

Key Responsibilities 

• Creative problem solver with experience in developing new films for emerging applications and experience in chemistry/materials characterization.
• Works with semiconductor processing equipment to research, develop and optimize unit processes focused on the deposition of metal and dielectric films via ALD.
• Bringing innovative ideas, staying abreast of state-of-the-art processing applications in the semiconductor industry to be effective.
• Process consulting and accountability including technical papers on advanced process applications and Intellectual Property creation.
• Participates in and drives technical problem-solving sessions using the related scientific method and industry tools, such as Ishikawa diagrams.
• Designs and conducts experiments, in addition to measuring and interpreting experimental output, aimed at fulfilling stated objectives using Design of Experiments (DOE) and Response Surface Methodology (RSM).
• Troubleshoots equipment problems and is personally and actively engaged in problem via “hands-on” modalities.
• Works with customers and central marketing to understand and define requirements to successfully execute and document customer demonstrations.
• Develops methods and techniques for integrating metal and/or oxide films into existing and future device technologies.
• Ensures successful product transfer to customer base by performing demonstrations, training field service personnel, traveling to support remote sites (up to 10% travel required), and drafting documentation regarding process development, tool operation and maintenance.
• Produces technical papers on process, equipment, and device integration improvement strategies and presents to professional audience.
• You may be assigned supervisory duties over supporting process engineering technicians and aides. These supervisory duties could include direct input into employees’ performance evaluations, discipline, and discharge.

Qualifications

• Master’s or PhD degree in Chemical Engineering, Materials Science, Chemistry, or Physics.
• Experience with Atomic Layer Deposition (ALD)
• Knowledge of electrical characterization techniques for CMOS devices.
• Application of dielectric and/or metal films for logic and memory structures.
• Training in CFD (computational fluid dynamics), either theoretical or practical is preferred.
• Knowledge of electrical characterization techniques for CMOS devices is preferred.

  Skills

• Ability to independently manage complex process development projects, including personnel, project schedules, experimental thrusts, hardware procurement and budgetary oversight.
• Ability to be a process consultant to internal and external customers.
• An authority on interplay between hardware design (e.g., chemical reactor design) and operation and process outputs
• Understanding of requirements for integration of metals as work function materials and barrier layers in FEOL and BEOL process flows
• Demonstrated ability to develop and completely characterize deposition processes using first principles and experimental design techniques (e.g., DOE, RSM).
• Experience with the theory, practice, and interpretation of materials characterization techniques such as XPS, SIMS, RBS, AFM, XRD, HRTEM, FESEM, Auger, Raman and ellipsometry.
• Excellent verbal and written communication skills, with ability to clearly communicate advanced technical constructs in direct and concise manner.

Job’s mission

As ASM accelerates its global PLM modernization journey, you’ll play a pivotal role in shaping how our engineers design, build, and innovate. You will guide the evolution of enterprise Teamcenter solutions that power our product development and manufacturing workflows across a global engineering community. Your work will help streamline collaboration, sharpen data quality, and bring next‑generation semiconductor technology to life faster and more reliably.

What you will be working on

• Work closely with engineering and manufacturing teams to translate business needs into scalable PLM and Teamcenter solutions.
• Support user adoption by guiding use cases, partnering with vendors, and driving enhancements that elevate product capabilities and business processes.
• Identify opportunities and challenges across current workflows and help shape the PLM technology strategy and roadmap.
• Maintain, optimize, and evolve Teamcenter configurations, processes, integrations, and supporting tools.
• Lead complex, multi‑team technology initiatives that deliver measurable improvements in efficiency and engineering experience.
• Apply project management practices that help teams work more effectively and collaboratively.
• Use your understanding of PLM architecture—workflows, APIs, runtime behavior, and system characteristics—to build scalable, reliable solutions.
• Manage PLM processes and tools in an electro‑mechanical environment.
• Drive integrations and automation with adjacent business systems including Oracle and Agile.
• Develop and monitor PLM data metrics to maintain stability, data accuracy, and smooth operation.
• Partner with cross‑functional users to gather insights and enhance product development, manufacturing, and operations workflows.
• Monitor and enhance Engineering Change processes to support quality and faster cycle times.
• Define product structure and Bill of Material (BOM) standards that ensure consistent, high‑quality data.
• Champion continuous improvement across PLM processes and lifecycle governance.
• Collaborate with developers to scope and implement new features that support evolving business needs.
• Deliver training, workshops, and guidance to promote PLM best practices and adoption.
• Stay current with industry trends and emerging technologies to drive ongoing improvement within PLM and engineering systems.

What we are looking for

• BS + 8 years, OR MS + 4 years, OR PhD with relevant experience in Mechanical, Industrial, or related engineering fields.
• Extensive experience implementing Siemens Teamcenter PLM solutions including configuration, setup, upgrades, and solution design.
• Experience leading requirements gathering, fit‑gap analysis, functional design, system testing, solution delivery, and user acceptance.
• Experience leading at least one full Teamcenter implementation in a complex engineering or manufacturing environment.
• Hands‑on experience with Teamcenter modules, BMIDE, ITK, and AWC development.
• Experience supporting PLM processes within an electro‑mechanical product environment.
• Experience integrating PLM with enterprise applications such as Oracle and Agile.
• Experience partnering with design engineering, manufacturing, and operations teams to drive improvements.
• Experience improving Engineering Change processes and lifecycle governance.
• Experience defining product structures and BOM standards.
• Ability to deliver training and support ongoing PLM adoption.
• Understanding of PLM architecture including workflows, APIs, and system behavior.

What sets you apart

• Experience with PLM and 3D CAD in the semiconductor industry.
• Experience with NPI lifecycle management, BOM configuration, and engineering change processes.
• Experience developing PLM metrics and dashboards.
• Experience supporting globally distributed engineering teams.
• Experience leading modernization or transformation initiatives within PLM or Engineering IT.