** This position is not eligible for visa sponsorship for external candidates. Candidates cannot require sponsorship now or in the future**

Job’s mission

Our Global Sales, Services & Spares IQ and Sustaining teams are seeking Snr Engineers I & II, Field Service (level will depend on experience, degree and responsibilities. Please review below) to join ASM at a customer site (TSMC) in North Valley, AZ. Domestic and International travel of at least 75% will be required for this role. As a Senior Field Service Engineer at ASM, you’ll play a critical role in supporting the advanced semiconductor equipment that powers the world’s most transformative technologies. You’ll take the lead on complex troubleshooting, guide and mentor engineers, and strengthen our partnerships by helping customers achieve stable, high‑performance fabrication environments. Your expertise will make a direct impact on tool reliability, customer satisfaction, and the next generation of ASM technology.

What you will be working on

Senior Engineer I, Field Service

• Install, maintain, and repair ASM semiconductor equipment with minimal supervision
  • Lead troubleshooting of complex tool or process issues using structured diagnostic methods
  • Perform root‑cause analysis and recommend targeted, data‑driven corrective actions
  • Review tool‑performance data to identify trends, risks, or improvement opportunities
  • Provide technical guidance and on‑the‑job coaching to less‑experienced engineers
  • Document service activities and support updates to procedures and best practices
  • Communicate solutions, progress, and expectations clearly with customer engineers
  • Participate in escalations alongside cross‑functional ASM engineering teams

Senior Engineer II, Field Service

• Serve as the senior technical lead for equipment installation, performance optimization, and recovery
• Diagnose and resolve highly complex, multi‑factor tool and process issues with limited guidance
• Lead advanced root‑cause analysis and drive long‑term corrective‑action plans that influence global engineering improvements
•  Own the customer‑technical relationship: build trust, anticipate operational needs, and act as ASM’s senior technical representative onsite
• Manage escalations end‑to‑end, aligning expectations, coordinating cross‑functional teams, and communicating clear action plans
• Guide, mentor, and develop engineers through hands‑on instruction, structured training, and knowledge‑sharing
• Champion best practices and contribute to procedure development, improvements, and field‑wide learning
•  Provide detailed field insights to R&D, product, and design teams, including support for beta tools or early‑option deployments

What we are looking for

Senior Engineer I, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 6+ years of experience, OR a Master’s degree with 4+ years of experience OR PhD degree with 0+ years of experience.
• Experience of semiconductor field service or capital‑equipment experience
• Ability to interpret electronic and electromechanical schematics
•  Experience with structured troubleshooting methodologies
• Knowledge of cleanroom and semiconductor safety protocols
• Strong written and verbal communication skills
• Ability to work independently and collaboratively in fast‑paced fab environments
• Willingness to travel domestically and internationally as needed for the role. 
• Proficiency in MS Office

Senior Engineer II, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 8+ years of experience, OR a Master’s degree with 6+ years of experience OR PhD degree with 4+ years of experience.
• Experience in semiconductor field service experience with demonstrated technical leadership
• Advanced knowledge of tool architecture, control algorithms, and multi‑factor troubleshooting
• Experience driving structured root‑cause analysis and long‑term corrective‑action plans
• Proven ability to lead escalations and manage customer‑technical relationships
• Strong communication and mentorship capabilities
• Ability to work autonomously while guiding and developing other engineers
• Willingness to travel domestically and internationally as needed for the role
• Proficiency in MS Office

What sets you apart

Senior Engineer I, Field Service

• Experience supporting beta tools or early‑option equipment
• Knowledge of wafer‑fab operations, robotics, vacuum systems, plasma, RF, or gas handling
• Experience writing or updating procedures or technical documentation
• Strong customer‑service approach and organizational skills
• Familiarity with structured problem‑solving methods

Senior Engineer II, Field Service

• Demonstrated leadership in complex troubleshooting programs or technical initiatives
• Experience owning customer‑technical relationships, including expectations and long‑term partnership building
• Strong capability in mentoring and developing field engineers
• Hands‑on expertise with fab robotics, vacuum systems, plasma, RF, or gas‑delivery systems
• Experience providing structured feedback to engineering or product teams
• Experience evaluating or supporting beta‑stage or early‑option tools

** This position is not eligible for visa sponsorship for external candidates. Candidates cannot require sponsorship now or in the future**

As a Field Service Engineer – Early Career, you’ll take on a hands-on role supporting ASM’s advanced semiconductor equipment and helping our customers keep their fabs running at peak performance. You’ll build real-world expertise through structured training, mentorship, and on-the-job learning while working directly with technologies that power AI, 5G, cloud computing, and next‑generation devices. This is your chance to apply your engineering background, strengthen your technical capabilities, and join a team that’s shaping the future of semiconductor innovation.

In this role, based in North-Valley/Phoenix, AZ at our customer site, you’ll launch your engineering career at the center of cutting‑edge semiconductor manufacturing. It’s an ideal opportunity for early‑career engineers who want to put their education into practice in a high‑tech environment where every day brings something new to learn.

From your first day, you’ll receive training through hands‑on guidance from seasoned engineers onsite. You’ll work with vacuum systems, plasma, chemical delivery, robotics, sensors, advanced metrology, and complex hardware‑software interactions. Your contributions will have a direct impact on tool performance, system uptime, and customer success—playing a meaningful role in enabling leading‑edge logic technology nodes. This experience lays a strong foundation for rapid growth, technical mastery, and a variety of long‑term career paths within ASM.

Shifts available:

Mon-Fri- 8am-5pm (subjected to OT)

What You Will Be Working On 

• Support installation, maintenance, and repair of ASM semiconductor equipment at customer sites 
• Troubleshoot equipment and process issues with guidance from senior engineers 
• Deliver clear, timely, customer‑focused support with a strong safety mindset 
• Working in cleanroom environments while following strict safety and quality standards.
• Assist in identifying and contributing to continuous improvement efforts  
• Participate in customer escalations alongside experienced team members 

What We Are Looking For 

• Bachelor’s or master’s degree in Electromechanical Engineering, Electrical Engineering, Mechanical Engineering, or related field 
• Candidates who are hands-on and mechanically curious, energized by complex systems and real-world problem solving, Comfortable working in fast paced, hightech environments & motivated to build a long-term engineering career. 
• Internship, co‑op, senior design project, lab research, or hands‑on technical experience 
• Ability to read and interpret basic electronic and electromechanical schematics 
• Understanding of safety protocols and willingness to work in cleanroom environments 
• Strong problem‑solving mindset and eagerness to learn 
• Clear communication skills and a strong customer-service mindset 
• Ability to work independently and collaboratively 
• Willingness to travel domestically and internationally 
• Proficiency with Microsoft Office 

What Sets You Apart 

• Demonstrated commitment to safety, quality, and disciplined execution 
• Exposure to semiconductor processes, wafer fabs, robotics, vacuum systems, plasma, or gas handling 
• Experience writing technical documentation in school or project settings 
• Familiarity with customer‑facing or support roles (internships, tutoring, help desk, teamwork) 
• Interest in structured problem‑solving methods, statistical methods, data analysis. 
• Curiosity and learning orientation when working with advanced semiconductor technologies 
• Participation in engineering clubs, competitions, or technical student groups 

Why join ASM? 

2026 is the year to join ASM as a Field Service Engineer. Apply now! 

Job's Mission:

As a Software Quality Assurance Engineer at ASM, you will ensure the reliability and effectiveness of our software that drives cutting-edge semiconductor processing equipment. You’ll work on testing and qualifying software, streamlining QA processes to align with CI/CD development, and collaborating with talented global teams. Your contributions will directly impact the functionality and performance of advanced hardware in the semiconductor industry.

What you will be working on:

• Design, develop, test, deploy, maintain, document, and improve software test suites.
• Perform both manual and automated testing in simulation environments and on physical semiconductor manufacturing equipment.
• Execute and analyze the functionality of engineering designs compared to intended outcomes, providing valuable feedback.
• Automate, streamline, and maintain QA processes to integrate seamlessly with CI/CD development workflows.
• Develop and implement quality standards, methods, and procedures to enhance existing business processes.
• Work closely with Process Engineering teams to test systems, validate engineering designs, and identify quality improvements.
• Create and manage tests plans and test cases, ensuring thorough validation of software enhancements and defect fixes.
• Gain an understanding of ASM system operations, including mechanical, electrical, and software functionality.
• Document testing procedures and feedback to ensure quality and consistency across projects.

What we are looking for:

• Bachelor’s + 5 years of experience, Master's +3 years OR PhD + 2 years of experience. Degree in Computer Science, Computer Engineering, or a related field.
• Proficiency in programming languages such as Python, C++, or C#.
• Experience with system quality assurance or engineering for complex electromechanical equipment with integrated software controls.
• Strong written and verbal communication skills for interacting with senior leadership and stakeholders.
• Willingness to travel up to 10% of the time.

What sets you apart

• Familiarity with tools like Jira, Confluence, Git, Test Complete, or TestRail.
• Experience in software configuration management or versioning in a software development environment.
• Knowledge of DevOps and CI/CD pipeline setup.

About the Opportunity

As a Full Stack Engineer on our growing EV team, you will be responsible for developing our backend services while maintaining a high security posture within our growing infrastructure. Working directly with other engineers, you will develop new services/products that EnergyHub is building in the connected EV space, engaging drivers and OEMs on new initiatives that help the proliferation of EVs worldwide.

This role is a full-stack role, giving candidates the opportunity to build services, APIs, and front-end user interfaces for drivers and clients to interact with.

Main Responsibilities: What you’ll do

• Develop and maintain the backend services of our EV platform, ensuring that all components work together seamlessly.
• Integrate with third-party APIs to implement external services into our platform, enhancing OEM partners and other external solutions.
• Manage ingestion and storage of multivariate data sets that can scale to millions of users/connected vehicles.
• Build and enhance data lakes to provide additional data analysis for different services and consumers.
• Develop services to interact with connected vehicles at scale.
• Develop and maintain front end “web apps” to provide UIs for our various different products and services.
• Ensure proper security and data protection policies, procedures, and monitoring are in place.
• Design, develop, and maintain third-party accessible APIs for data ingest/egress within the platform.
• Write and maintain technical documentation.
• Drive and embody the “Dev Owns Quality” culture.
• Other duties as assigned

Required Skills and Experience: What you need

• 3+ years professional software engineering experience, preferably in a small to medium-sized team, with a proven exceptional ability as a FullStack engineer or similar role.
• Strong comfortability with Kotlin/Java and familiarity with web services and RESTful APIs using Spring.
• Expertise in API ingestion and data normalization processes.
• Experience with front end languages, such as React/Typescript.
• Experience with containerized systems.
• Knowledge of modern security best practices, authentication/authorization frameworks, and system/API hardening.

Preferred Skills and Experience: Nice-to-haves

• Experience with AWS or other cloud providers.
• Experience with GraphQL.
• Typical development tools and processes (automated testing, continuous integration/deployment, monitoring systems)
• Experience with Event-Driven systems and data processing pipelines (Kafka, SNS/SQS, Kinesis, S3, etc)

Your Impact

As a Priority Support Engineer, you’re not just resolving technical issues — you’re a trusted advisor and escalation authority for Axon’s most critical customers. You’ll have the autonomy to assess complex, high-impact cases, make real-time decisions to stabilize customer operations, and drive cross-functional efforts that shape how Axon delivers world-class support.

You’ll act as the bridge between frontline support, higher support tiers, engineering, and product teams — using your technical acumen and customer insight to influence product improvements, operational workflows, and service-level strategies. Your independent judgment and ownership mindset will directly impact customer trust, product adoption, and Axon’s brand reputation in the field.

This role offers high ownership and autonomy. Engineers are trusted to make informed decisions in complex, ambiguous situations, prioritize high-value work, and serve as technical SMEs for Axon’s most strategic customers. Candidates must be sharp, adaptable, and unstoppable: capable of navigating high-pressure environments with confidence and clarity.

What You’ll Do

Location: Candidates must be located in the following locations: Scottsdale, AZ
Reports to: Manager, Technical Support

• Case Ownership: Full lifecycle ownership of support cases for designated high-priority customers, including triage, prioritization, resolution, and follow-up.
• Independent Judgment: Empowered to make real-time decisions regarding escalation paths, interim solution, and technical approaches based on severity and customer impact.
• Defined Goal Execution: Operate with broad autonomy once objectives are defined (e.g., resolution efficiency, escalation reduction), with latitude in selecting methods and tools to meet outcomes.
• Subject Matter Expertise: Act as a technical SME across specific product domains; contribute to Tier 1 enablement, documentation, and internal training as needed.
• Process Adaptability: Authorized to adapt standard procedures when warranted by situational demands, provided decisions align with core support and customer service objectives.
• Ambiguity Management: Expected to take initiative in undefined or novel scenarios, identifying risks and acting proactively with minimal or no direction.
• This role assumes a high degree of trust and requires consistency in decision-making, accountability for outcomes, and alignment with team-wide quality and communication standards.

What You Bring

• 2+ years technical support experience in complex software, hardware, or cloud-based environments
• Proven ability to exercise independent judgment and make time-sensitive decisions in ambiguous, high-stakes situations
• Deep technical aptitude in Windows environments, networking, mobile ecosystems, and cloud applications
• Exceptional communication and interpersonal skills with ability to adapt language and approach for audiences ranging from IT admins to command staff
• Demonstrated ownership mindset (#OWNIT): proactive, accountable, and results-oriented
• Strong problem-solving ability with a data-driven approach to identifying patterns and preventing recurrence
• Proven ability to work autonomously while effectively influencing across teams and functions

Preferred Qualifications

• Bachelor’s Degree
• Experience in Axon applications (Salesforce, MS Dynamics, JIRA, InContact, and Vonage)
• 2+ years in networking or telecommunications, ideally within public safety or government sectors
• Relevant technical certifications (Network+, CCNA, MCSA, etc)
• System Administration or Cloud Infrastructure certifications

The Spares Planner & Clean Kit Management Planner ensures that all scheduled sanitation and maintenance activities are meticulously planned, kitted, and scheduled. This role bridges the gap between Field service engineers, Service Operations and Logistics, reducing downtime waiting for parts through proactive planning, material management, and scheduling.

The expectation for this position is the ability to work independently and able to multi task on daily operational responsibilities in deadline driven environment. The individual could demonstrate strong commitment to drive results. This position requires the highest level of communication, ownership, responsiveness. Data integrity and attention to detail are paramount. 

Education

Bachelor’s Degree or equivalent work experience (8+ years in related field); College courses in industrial engineering, supply chain, and business administration preferred.

Experience

• 8 or more years’ experience as a planner, expeditor or related experience with inventory control and/or supply chain studies. 
• Spares planning is desirable.
• Knowledge of planning and scheduling systems, planning master data management, purchase order expedites, spares logistics, inventory control theories with prior experience related to semiconductor, electronics industry or related high-volume customers are desirable. 

Skills

• Fluent in English is a must
• Experience with SAP and Microsoft Office Suite (Excel, Word, PowerPoint).
• Strong ability to analyze large datasets, interpret complex data, and derive meaningful insights.
• highest level of communicative competence
• Fluency in Mandarin Chinese is always a plus

Job Description

• Kit Preparation: Build "kits" to ensure Field service engineer / Customer have everything needed for the job before starting.
• Kit Planning & Scheduling: Develop kitting schedules that align with PM cycle.
• Inventory & Supplier Management:
• Analyze historical demand, adjust planning & validate forecasts.
• Manage stocking levels, E&O and inventory rebalancing.
• Support NPI planning, initial stocking strategies, and part lifecycle transitions.
• Monitor and validate MRP accuracy.  Responsible & resolves data integrity issues.  Responds to MRP validation inquiries from purchasing community.
• Expediting materials when foreseeing shortage in material horizontal table.
• Coordination: Act as the primary liaison between FSE, CSR, Buyer, Forecaster, and Logistics.
• Demonstrate ability to lead cross-functional meetings to drive the commitments or results.
• Regular analysis report and Ad-Hoc analysis support are both required.

Apply today to be part of what’s next.

Senior Engineer I, Software Engineering - Factory Automation 

As part of ASM’s Software Engineering team, you’ll develop advanced control software that drives the most sophisticated semiconductor equipment in the world. Your work will directly impact robotics, gas flow systems, and temperature control hardware—delivering real-time results in chip manufacturing. Based in Phoenix, you’ll collaborate globally and help shape the future of semiconductor automation and factory integration.

What you will be working on:

• Design and develop factory automation features on the equipment side, including:
  • Remote command execution
  • Host-driven FOUP handling and workflow integration
  • Recipe management from host systems
  • Factory Automation (FA) ID management
• Build and enhance supervisor-layer software infrastructure, working closely with GUI and device control teams
• Troubleshoot and resolve issues related to factory automation and system integration, both during development and in production environments
• Collaborate with customer station controller teams to ensure seamless host-to-equipment communication
• Support feature validation and testing (e.g., DLab) and participate in on-tool debugging and issue resolution when needed

What we are looking for:

• Bachelor’s degree in Computer Science, Software Engineering, or a related field (Master’s preferred)
• Strong programming experience in C#
• 5+ years of professional software development experience
• Experience in the semiconductor or manufacturing automation industry
• Hands-on experience with factory automation systems and equipment integration
• Familiarity with industry standards such as:
  • SECS/GEM
  • GEM300
  • EDA / Interface A
• Experience working with Automated Material Handling Systems (AMHS)
• Experience with modern communication frameworks such as gRPC

What sets you apart

• 10+ years in software development and architecture
• Experience with:
• Strong problem-solving skills in complex, distributed systems

• Experience working in cross-functional and customer-facing environments

• Experience with performance profiling and memory optimization
• Exposure to Agile/Scrum methodologies

Senior Engineer I, Software Engineering

As part of ASM’s Software Engineering team, you’ll develop advanced control software that drives the most sophisticated semiconductor equipment in the world. Your work will directly impact robotics, gas flow systems, and temperature control hardware—delivering real-time results in chip manufacturing. Based in Phoenix, you’ll collaborate globally and help shape the future of semiconductor automation and factory integration.

Responsibilities:

• Design, develop, test, deploy, and maintain software for semiconductor manufacturing equipment
• Build software for Windows and real-time operating systems
• Troubleshoot and resolve issues in real-time control systems
• Triage mechanical, electrical, and software bugs
• Lead escalation calls with field engineers and global customers
• Collaborate with QA and Support teams to manage regression testing
• Author and review system specifications, software designs, and test plans
• Investigate internal and external problem reports and propose solutions
• Evaluate and recommend software engineering tools
• Participate in system design and scheduling efforts
• Integrate and support factory automation protocols such as SECS/GEM
• Work closely with automation teams to ensure seamless equipment-factory communication

Requirements:

• BS Degree in Computer Science or related field. MS preferred.
• Strong software development skills in C#
• 5+ years’ experience as a generalist or mid-stack software developer
• Experience in the semiconductor industry
• Hands-on experience with factory automation systems
• Familiarity with SECS/GEM, GEM300, EDA/Interface A protocols
• Experience with AMHS (Automated Material Handling Systems)

What sets you apart

• 10+ years in software development and architecture
• Experience with:
  • Machine control software (especially for semiconductor equipment)
  • Windows and real-time operating systems
  • Multi-threaded and real-time applications
  • GUI development and device drivers
  • Networking, data communications, and EtherCAT
  • Dynamic scheduling algorithms with deadlock avoidance

Senior Engineer I, Software Engineering - Factory Automation 

As part of ASM’s Software Engineering team, you’ll develop advanced control software that drives the most sophisticated semiconductor equipment in the world. Your work will directly impact robotics, gas flow systems, and temperature control hardware—delivering real-time results in chip manufacturing. Based in Phoenix, you’ll collaborate globally and help shape the future of semiconductor automation and factory integration.

Responsibilities:

• Design, develop, test, deploy, and maintain software for semiconductor manufacturing equipment
• Build software for Windows and real-time operating systems
• Troubleshoot and resolve issues in real-time control systems
• Triage mechanical, electrical, and software bugs
• Lead escalation calls with field engineers and global customers
• Collaborate with QA and Support teams to manage regression testing
• Author and review system specifications, software designs, and test plans
• Investigate internal and external problem reports and propose solutions
• Evaluate and recommend software engineering tools
• Participate in system design and scheduling efforts
• Integrate and support factory automation protocols such as SECS/GEM
• Work closely with automation teams to ensure seamless equipment-factory communication

Requirements:

• BS Degree in Computer Science or related field. MS preferred.
• Strong software development skills in C#
• 5+ years’ experience as a generalist or mid-stack software developer
• Experience in the semiconductor industry
• Hands-on experience with factory automation systems
• Familiarity with SECS/GEM, GEM300, EDA/Interface A protocols
• Experience with AMHS (Automated Material Handling Systems)

What sets you apart

• 10+ years in software development and architecture
• Experience with:
  • Machine control software (especially for semiconductor equipment)
  • Windows and real-time operating systems
  • Multi-threaded and real-time applications
  • GUI development and device drivers
  • Networking, data communications, and EtherCAT
  • Dynamic scheduling algorithms with deadlock avoidance

Your Impact

If you love to get close to your users to understand and solve their problems quickly, this is the place for you. If you thrive on working with other teams to drive solutions quickly on a brand-new product, this is the challenge for you. If you are interested in supporting a mission critical product used to save lives, this is the product for you.

Axon is seeking a high-energy, experienced Software Support Engineer with expertise in cloud solutions. This individual will play an instrumental role in supporting critical escalated issues and customer requests. We need a self-starter who excels in a high-paced, evangelistic startup environment, focusing on law enforcement, thriving on resolving software issues, and building strong customer relationships.

What You’ll Do
Reports to: Manager, Technical Support

• Work closely with Law Enforcement customers to ensure a stellar experience with Axon products and services
• Provide front line support to Axon software customers while logging detailed notes on each customer interaction
• Collaborate with customers to determine the urgency of tickets/requests and identify their priority across engineering teams.
• Research, troubleshoot, diagnose customer issues and requests across all a variety of products and systems.
• Follow up with clients to ensure their systems are fully functional after troubleshooting
• Log & provide detailed notes on each customer interaction
• Develop knowledge base articles on top issues
• Participate in an on-call rotation for outage escalations
• Provide back-up support to other Axon Support teams and colleagues

What You Bring

• 3+ years of support experience for cloud-based products
• Track record of completing goals and driving initiatives to completion
• Experience working within the Law Enforcement/Public Safety space
• Forward Thinking and Task Driven
• Experience solving complex technical problems and leading support related projects
• Strong communication skills and the ability to communicate to both technical and non-technical customers/colleagues.
• Experience working with applications like JSON schemas, GitHub, python, VS Code, Azure Data Studio, SSMS.
• Ability to work independently with substantial latitude for action and decision while maintaining focus on achieving outcomes.
• Must pass a Criminal Justice Information Services (CJIS) background check and maintain confidential and highly sensitive information

Benefits that Benefit You

• Competitive salary and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• And yes, we have snacks in our offices

Benefits listed herein may vary depending on the nature of your employment and the location where you work

We are seeking an R&D Metrology Engineer to join our dynamic materials development labs. The ideal candidate will be self-motivated, hands-on, and a resourceful problem solver with a strong understanding of materials characterization equipment and methods. In this role, you will work closely with ALD and Epi process engineers to develop and optimize next-generation materials for advanced node semiconductor processing.

This position requires working the early morning shift (1^st shift), including weekend coverage, to ensure optimal utilization and uptime of metrology equipment in a fast-paced R&D environment

Key Responsibilities

• Apply advanced metrology techniques to support the company’s materials and process development roadmap.
• Troubleshoot metrology equipment issues and collaborate with vendors to resolve hardware/software malfunctions.
• Partner with process engineers to select appropriate characterization methods and assist in data interpretation.
• Acquire and analyze metrology data; summarize findings for engineering and management review.
• Maintain tool uptime by partnering with vendors and supporting lab operations during off-hours.
• Train engineers on metrology tools, develop SOPs, and create recovery procedures for tool-down scenarios.
• Monitor uptime data; contribute to tool efficiency and continuous improvement initiatives.
• Develop metrology recipes and applications to streamline operations and solve technical challenges.
• Provide on-call support and ensure smooth lab operations during night and weekend shifts.
• Maintain LEAN 6S standards and contribute to a clean, organized lab environment.
• Stay current with industry trends by attending conferences, seminars, and workshops.

Required Qualifications

• Ph.D. in Materials Science and Engineering (preferred), or other engineering fields, Chemistry, Physics, Engineering, or related field.
• Hands-on experience with TEM, STEM, EDS, EELS, SEM, and FIB.
• Familiarity with techniques such as XRR, XRD, XRF, TXRF, FTIR, SPV, four-point probe, Hall effect, and defect inspection tools.
• Solid understanding of semiconductor processing and device fabrication.
• Proficiency in MS Office and JMP; strong data analysis and reporting skills.
• Excellent communication skills and ability to work independently and collaboratively.
• Availability for night and weekend support as needed.

Preferred Qualifications

• Experience developing metrology recipes and turnkey solutions.
• Background in lab operations and equipment maintenance.
• Programming experience, particularly in scripting or automation for data acquisition, data analysis, and tool control.

Engineer, Software Support

At ASM, our Software Engineering teams works on delivering software that has immediate, tangible results visible in the operation of semiconductor processing equipment hardware. The hardware includes robotics, gas valves, temperature controllers and other hardware.  

As a Software Support Engineer, you will make an impact by investigating, recreating, and troubleshooting software issues to resolution as reported by our customers. 

Responsibilities:

• Gather information to investigate the issue, reproduce it, determine the root cause, and recommend corrective actions. 
• Troubleshoot and resolve software issues, including embedded software for control systems.  Able to triage mechanical, electrical, and software bugs. 
• Responsible for managing escalation calls with field support engineers 
• Create bug reports for the developer to use when fixing the bug. 
• Work with QA to add replicated bugs to the regression. 
• Travel to customer sites to support installations, training, and troubleshooting of ASM products. 
• Talking to the account team and GPS group (not directly with the customer) when investigating reported issues. 
• The team will handle all issues until they are ready to send to the developer.  

Minimum Qualifications 

• BS+ 4 years experience or MS+ in Computer Science, Computer Engineering, or a related field. 
• Ability to read code and diagnose issues.  
• Software development or test (QA) experience. 
• Ability to travel 10-25% domestic and international.

Preferred Qualifications 

• Preferred expertise in C/C++, C#, Python, Gitlab/Github.
• Experience with semiconductor equipment preferred 
• Experience working with two or more of the following is preferred: software for machine control, Semiconductor Factory Automation, Multi-threaded applications, real-time software, device drivers, or other interrupt-driven software 

Senior Engineer, Software Support

At ASM, our Software Engineering teams works on delivering software that has immediate, tangible results visible in the operation of semiconductor processing equipment hardware. The hardware includes robotics, gas valves, temperature controllers and other hardware.  

As a Senior Software Support Engineer, you will make an impact by investigating, recreating, and troubleshooting software issues to resolution as reported by our customers. 

Responsibilities:

• Gather information to investigate the issue, reproduce it, determine the root cause, and recommend corrective actions. 
• Troubleshoot and resolve software issues, including embedded software for control systems.  Able to triage mechanical, electrical, and software bugs. 
• Responsible for managing escalation calls with field support engineers 
• Create bug reports for the developer to use when fixing the bug. 
• Work with QA to add replicated bugs to the regression. 
• Travel to customer sites to support installations, training, and troubleshooting of ASM products. 
• Talking to the account team and GPS group (not directly with the customer) when investigating reported issues. 
• The team will handle all issues until they are ready to send to the developer.  

Minimum Qualifications 

• BS+ 8 years or MS+ 4 years in Computer Science, Computer Engineering, or a related field. 
• Ability to read code and diagnose issues.  
• Software development or test (QA) experience. 
• Ability to travel 10-25% domestic and international.

Preferred Qualifications 

• Preferred expertise in C/C++, C#, Python, Gitlab/Github.
• Experience with semiconductor equipment preferred 
• Experience working with two or more of the following is preferred: software for machine control, Semiconductor Factory Automation, Multi-threaded applications, real-time software, device drivers, or other interrupt-driven software 

Senior Solution Sales Engineer - 

Position Description: 

We believe Solutions Engineers at Okta are involved in all stages of the customer’s development lifecycle and are experienced using presentations, email, phone and social media to connect with customers. We are looking for great teammates that can build sales presentations, product demonstrations, and educate customers (everyone from developers to product managers to C-level executives) on the best ways to cloud security technology.  We believe in Okta’s Solutions Engineers empathize with customers and quickly discern their true technical needs by asking detailed and clarifying questions and presenting solutions that target those needs. You have the rare combination of technical savviness and business insight and you’re looking for a career where you can utilize both. As a Senior Solutions Engineer at Okta, you will hone each of these skills by advising a diverse set of Fortune 500 customers on what is possible using Okta’s Identity Platform. 

Job Duties and Responsibilities:

• Collaborate with account executives to develop and execute territory and account strategies to maximize the Okta opportunity in those accounts
• Conduct research and discovery to understand customer requirements and communicate the business value of solving technology problems using cloud technology
• Execute the delivery of POCs for customers with complex use cases, collaborating with other Okta engineering teams as needed
• Craft technical content to show customers how to implement specific use cases or standard methodologies for new technologies
• Prepare and deliver demos to showcase how the Okta platform meets customer’s business needs and use cases.  
• Distill and communicate customer needs and product feedback to Product Management, Engineering, Marketing and Sales

Required Skills:

• 5+ years pre-sales engineering experience
• A passion to serve the customer, which has played out in some customer-facing role like consulting or support, ideally solutions engineering
• An ability to quickly and effectively communicate complex technical concepts via presentation, slides and whiteboard 
• A Strong Understanding of Identity & Access Management (IAM)
• SSO, MFA, SCIM, OAuth 2.0, OIDC, SAML, and LDAP.
• Lifecycle management, role-based access control (RBAC), and provisioning/deprovisioning.
• A strong understanding of Zero Trust Architecture and core security concerns within a typical application (password hashing, SSL/TLS, encryption at rest, XSS, XSRF)
• Hands-on experience in one or more of the following areas is a plus: web (JavaScript, HTML, frontend frameworks) development, mobile (iOS, Android) development, backend (Java, C#, Node.js, Python, PHP, Ruby) development, IP-based real-time communications
• Experience with cloud platforms: AWS, Azure, GCP.
• You are an elite communicator
• Can identify, map, and manage multiple personas: IT admins, CISOs, architects, procurement, and legal.
• Confident dispensing knowledge to a highly skilled and experienced audience
• Typically 10-25% travel
• Bachelor's degree in Engineering, Computer Science, MIS or a comparable field is preferred.

 This role requires in-person onboarding and travel to an office in the U.S. during the first week of employment.

#LI-hybrid

#LI-LSS1

P13951_3337053

About Team & About Role:

Rubrik’s sales organization is a united group of elite cross-functional sales professionals that help companies & government entities achieve resilience against cyberattacks, malicious insiders, and operational disruptions. We offer continuous professional development through our world class sales enablement program and our One Rubrik selling approach provides all the resources you need to exceed your goals, maximize your earnings potential and take your career to the next level. All this while doing something that truly matters, protecting the world's data.

As a SaaS Product Line Specialist Sales Engineer, you will provide technical direction and business guidance to the regional sales team. We are seeking a self-starter who will exceed sales quotas by driving innovative technical programs, pipeline generation alongside AEs, customer demonstrations, POCs, and overseeing day-to-day account-level activities. You will be responsible for evangelizing, positioning, and architecting Rubrik’s Data Resilience, Observability and Remediation tools to a targeted list of new & existing customers throughout the Western Region.

What You'll Do:

• Provides technical leadership and direction to Rubrik, customers, and prospects in the development and positioning Rubrik's SaaS solutions (M365, Google Workspace, Jira, Dynamics)
• Serves as a trusted technology advisor to customers and serves as a public cloud subject matter expert when positioning Rubrik's SaaS capabilities to key accounts.
• Leads technical sales calls, gathers / analyzes customer feedback, and identifies trends.
• Qualifies sales opportunities in the terms of customer technical requirements, competition, decision making process and funding.
• Maintains a consistent cadence with product management to ensure product roadmap alignment with customer demands.
• Assists with the development of marketing and sales collateral to ensure alignment with customer needs and technical accuracy.
• Aids in the development and delivery of technical enablement to Rubrik, channel, and alliance partner sales architects.
• Cross-functionally drives the adoption of Rubik's cloud native protection technologies throughout Rubrik and the public cloud ecosystem.

Preferred Qualifications:

• 5+ years of sales engineering experience in an unstructured data environment with a proven track record of success
• Additional preference for experience with M365, Google Workspace, Dynamics, Jira and other SaaS applications
• Driven – need for success, highly energetic with a strong hands-on, “can do” approach.
• The successful candidate must have a fundamental breadth of technical knowledge in cloud data management, backup and disaster recovery and data analytics.
• Entrepreneurial - willing to go the extra mile, strong work ethic, resourceful, “get it done” attitude
• Strives in moving in a fast-paced environment; including handling multiple calls/demos per day with immediate follow up.
• A high level of business acumen and experience working with Cx0 level personnel, bringing technology solutions to solve business challenges.
• Smart, adaptable and open-minded

#LI-CG1

About the Company

Gemini is a global crypto and Web3 platform founded by Cameron and Tyler Winklevoss in 2014, offering a wide range of simple, reliable, and secure crypto products and services to individuals and institutions in over 70 countries. Our mission is to unlock the next era of financial, creative, and personal freedom by providing trusted access to the decentralized future. We envision a world where crypto reshapes the global financial system, internet, and money to create greater choice, independence, and opportunity for all — bridging traditional finance with the emerging cryptoeconomy in a way that is more open, fair, and secure. As a publicly traded company, Gemini is poised to accelerate this vision with greater scale, reach, and impact.

The Department: Enterprise Infrastructure

Within Operations, the Enterprise Infrastructure team owns the internal technology ecosystem that supports Gemini's offices and employees. The team operates as a unified engineering and service organization, combining front-line support excellence with DevOps-driven platform engineering under a single mandate.

Our enterprise technology strategy fuels business growth through an engineering-first approach by delivering a modern, secure, and scalable foundation for seamless collaboration, efficient operations, and future-ready innovation. By emphasizing operational excellence, continuous improvement of existing systems, and strategic automation – including Infrastructure as Code, GitOps workflows, and AI-augmented operations – we position IT as an engineering discipline whose impact extends across the department and the broader organization.

The Role: Staff Enterprise Infrastructure Engineer

As a Staff Enterprise Infrastructure Engineer, you will serve as a technical leader and force multiplier across the full breadth of Enterprise Infrastructure – from end-user support excellence to backend platform engineering and automation.

You will apply DevOps methodologies to drive the design, implementation, and continuous improvement of the systems that underpin Gemini's global workforce. This includes owning strategies and execution for endpoint management, user identity and access lifecycle, internal tooling, Infrastructure as Code, CI/CD pipelines, and AI-augmented operational workflows. You will define and track key metrics, communicate trends and capacity insights to leadership, and make strategic decisions about tooling adoption, vendor relationships, and architectural direction with an awareness of how these decisions impact teams and stakeholders beyond Enterprise Infrastructure.

A core expectation of this role is that you approach problems with an eye toward scalability and sustainability, building systems that reduce manual toil, improve reliability, and position the team for rapid growth. You are expected to critically evaluate existing systems and processes, challenging assumptions, identifying inefficiencies, and driving improvements to legacy workflows with the same rigor applied to new builds. You will act as a mentor and escalation point for others, fostering a culture of engineering rigor within support operations and a culture of user empathy within engineering work.

The ideal candidate has deep experience across both operational support and DevOps-driven infrastructure, thrives in ambiguity, and is energized by the challenge of consolidating legacy tooling into modern, automated, GitOps-driven workflows. They bring a pragmatic approach to adopting emerging capabilities – including agentic AI – and are motivated by building solutions that scale beyond their immediate team to benefit the broader organization.

This role is required to be in person 5 days per week at our Tempe, AZ office.

Responsibilities:

• Office & Endpoint Operations

  • Manage hardware inventory, secure storage, and physical IT infrastructure across global office locations.
  • Administer and support endpoint fleets including provisioning, patch management, and peripheral troubleshooting.
  • Support office A/V systems, network connectivity, and conference room technology.

• Service Operations & Delivery

  • Resolve service and incident requests with quality, speed, and thorough documentation.
  • Manage user identity and access lifecycle – including SSO, SCIM, MFA, and security key administration.
  • Maintain and improve SaaS platform configurations, vendor relationships, and internal support workflows.
  • Track operational metrics, surface trends, and communicate capacity insights to leadership.

• Platform Engineering & Automation

  • Build and maintain infrastructure using IaC, configuration management, and GitOps-driven deployment workflows.
  • Develop internal tools and integrations that automate fleet operations, user lifecycle management, and cross-service orchestrations
  • Design and operate CI/CD pipelines for infrastructure changes, tooling, and endpoint configurations.
  • Lead endpoint management platform migrations, including policy authoring, GitOps-managed profiles, and fleet-wide telemetry.
  • Design and implement agentic AI workflows to augment IT operations, applying context engineering principles to enable reliable, bounded automation and validations.

Minimum Qualifications:

• 8+ years of progressive experience in enterprise IT, infrastructure engineering, or a DevOps-focused support capacity.
• Strong proficiency with macOS fleet management at scale using MDM platforms.
• Hands-on experience with Infrastructure as Code and configuration management tooling.
• Proficiency in at least two of the following languages: Go, Python, Swift – with demonstrated ability to build production-grade internal tooling and API integrations.
• Deep experience with identity and access management platforms (Okta, Google Workspace, Active Directory), including SSO, SCIM, Device Assurance Policies, MFA, and user lifecycle automation.
• Working knowledge of CI/CD pipelines (GitHub Actions or equivalent) and Git-based development workflows.
• Solid understanding of networking fundamentals.
• Experience with AWS cloud services in a production or internal-tooling context.
• Proven ability to communicate complex technical concepts to both technical and non-technical audiences, including leadership.
• Experience mentoring junior engineers and contributing to team culture, hiring, and process improvement.

Preferred Qualifications:

• Experience in fintech, crypto, or regulated financial services environments.
• Experience with FleetDM and osquery for endpoint telemetry, compliance, and GitOps-managed device configuration.
• Experience designing agentic AI harnesses and workflows or applying context engineering techniques to augment operational processes (e.g., Claude Code, OpenCode, LLM-driven automation).
• Proficiency in Go, Python, and/or Swift for internal tooling development.
• Hands-on experience deploying reliable tools via Containerization and Orchestration (Docker, Kubernetes/EKS).
• Experience managing 1,000+ user accounts across a globally distributed workforce.
• Working knowledge of the Apple MDM protocol and open-source macOS tooling (Munki, AutoPkg, SaltStack, etc.).
• Experience with A/V systems administration (Crestron, Logitech, Chromebox for Meetings).
• SaaS Administration experience (Anthropic, Atlassian, Google Workspace, Linear, Okta, & more), service management workflows, and SLA reporting.

• Competitive starting pay
• A discretionary annual bonus
• Long-term incentive in the form of a new hire equity grant
• Comprehensive health plans
• 401K with company matching
• Paid Parental Leave
• Flexible time off

At Gemini, we strive to build diverse teams that reflect the people we want to empower through our products, and we are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. Equal Opportunity is the Law, and Gemini is proud to be an equal opportunity workplace. If you have a specific need that requires accommodation, please let a member of the People Team know.

#LI-AA1

Role overview

As a Senior Process Engineer at ASM, you will work with semiconductor processing and analytical equipment to research, develop and optimize processes focused on oxidation, annealing, curing, Atomic Layer Deposition (ALD, PEALD), Epitaxy or PECVD for logic, memory, analog, power, and MEMS applications. You will design and conduct complex experiments, measurements and perform the interpretation of complex experimental output. While you deliver creative and inventive solutions, technical publications, and generation of Intellectual Property (IP) are an essential function of this position. 

Note: This role is intended for candidates who are graduating in Spring 2026 or have graduated within the past two years and have 0–2 years of professional work experience.

Responsibilities 

• Creative problem solver with experience in developing new films for emerging applications and experience in chemistry/materials characterization.
• Works with semiconductor processing equipment to research, develop and optimize unit processes focused on the deposition of metal and dielectric films via ALD, PEALD, Epitaxy, and/or PECVD.
• Bringing innovative ideas, staying abreast of state-of-the-art processing applications in the semiconductor industry to be effective.
• Process consulting and accountability including technical papers on advanced process applications and Intellectual Property creation.
• Participates in and drives technical problem-solving sessions using the related scientific method and industry tools, such as Ishikawa diagrams.
• Designs and conducts experiments, in addition to measuring and interpreting experimental output, aimed at fulfilling stated objectives using Design of Experiments (DOE) and Response Surface Methodology (RSM).
• Troubleshoots equipment problems and is personally and actively engaged in problem via “hands-on” modalities.
• Works with customers and central marketing to understand and define requirements to successfully execute and document customer demonstrations.
• Develops methods and techniques for integrating metal and/or oxide films into existing and future device technologies.
• Ensures successful product transfer to customer base by performing demonstrations, training field service personnel, traveling to support remote sites (up to 10% travel required), and drafting documentation regarding process development, tool operation and maintenance.
• Produces technical papers on process, equipment, and device integration improvement strategies and presents to professional audience.
• You may be assigned supervisory duties over supporting process engineering technicians and aides. These supervisory duties could include direct input into employees’ performance evaluations, discipline, and discharge.

Minimum Qualifications

• We are looking for candidates who have graduated within the last 0-2 years or will graduate in Spring or Fall 2025 and are eager to begin or advance their career.
• Master’s or PhD degree in Chemical Engineering, Materials Science, Electrical Engineering, or Physics.
• 0-7+ years of combined education, research, and work experience with:
• Cure, oxidation, ALD, CVD, Epitaxy, PECVD and/or other thin film deposition.
• Materials characterization techniques such as XPS, SIMS, RBS, AFM, XRR, XRD, TEM, SEM and ellipsometry.
• Knowledge of electrical characterization techniques for CMOS devices.
• Application of dielectric and/or metal films for logic and memory structures.
• Training in CFD (computational fluid dynamics), either theoretical or practical is preferred.
• Knowledge of electrical characterization techniques for CMOS devices is preferred.
• Graduating in Fall 2025 or graduated within the past two years.
• 0–2 years of professional work experience.

Preferred Qualifications

• Ability to independently manage complex process development projects, including personnel, project schedules, experimental thrusts, hardware procurement and budgetary oversight.
• Ability to be a process consultant to internal and external customers.
• An authority on interplay between hardware design (e.g., chemical reactor design) and operation and process outputs
• Understanding of requirements for integration of metals as work function materials and barrier layers in FEOL and BEOL process flows
• Demonstrated ability to develop and completely characterize deposition processes using first principles and experimental design techniques (e.g., DOE, RSM).
• Experience with the theory, practice, and interpretation of materials characterization techniques such as XPS, SIMS, RBS, AFM, XRD, HRTEM, FESEM, Auger, Raman and ellipsometry.
• Excellent verbal and written communication skills, with ability to clearly communicate advanced technical constructs in direct and concise manner.

Your Impact

The Technical Support Engineer provides  2nd & 3rd level support to Dedrone by Axon customers and partners worldwide. With your ability to research, diagnose, troubleshoot, and resolve issues, and with your excellent communication skills, you will continually innovate to ensure Dedrone by Axon is offering the best level of service to the customer’s satisfaction. This is a customer focused, technical, hardware and software-related support position with responsibilities for meeting or exceeding performance and quality goals.

What You’ll Do 
Location: Sterling, VA or Mesa, AZ offices - 4 days in-office required
Reports to: Manager, Technical Support – Dedrone by Axon

• Develop a complete understanding of the Airspace Security Solutions by Dedrone by Axon
• Provide 2^nd and 3^rd level support for the Dedrone by Axon Product Family to field engineers and customers
• Research and identify solutions to resolve software and hardware issues
• Diagnosing and troubleshoot technical issues, including account setup and network configuration
• Take ownership of customer issues reported and seeing problems through to resolution
• Track internal and external requests and technical issues to resolution, within agreed time limits
• Update, maintain and monitor our customer systems as a full service
• Ensure all requests and issues are properly logged
• Prioritize and manage several open issues at one time
• Document technical knowledge in form of notes and manuals
• Follow standard procedures for proper escalation of unresolved issues to the appropriate internal teams
• Work with engineering and development teams to perform root cause analysis
• Take part in On-call Support and weekend coverage

What You Bring

• Bachelor’s degree in computer science or a related field, or 7+ years relevant work experience preferred
• Previous practical work experience in the field of customer support
• Excellent troubleshooting skills at all levels to be able to identify and quickly resolve issues
• Strong knowledge of routing/switching
• Very good knowledge in networks and Linux
• Strong sense of ownership and urgency
• Ability to work well in a team and enjoy knowledge sharing
• Excellent communication skills with the ability to provide advice to non-technically aware customers
• Willing and able to travel
• Good knowledge about consumer UAV protocols and standards
• Basic knowledge and understanding of RF technology
• Basic understanding of cloud computing solutions
• Drone pilot license in future
• Must pass a Criminal Justice Information Services (CJIS) background check and maintain confidential and highly sensitive information.
• US Citizenship is required with the ability to obtain US Government security clearance
• Fluent English & Spanish

Benefits that Benefit You

• Competitive salary and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• And yes, we have snacks in our offices

Benefits listed herein may vary depending on the nature of your employment and the location where you work.

What The Role Is

We are seeking a talented Senior Data Engineer to design, build, and maintain our data infrastructure supporting mission-critical energy operations. You'll work at the intersection of renewable energy and data, developing pipelines that process everything from real-time asset performance data to complex trading and risk analytics. This hybrid role offers the opportunity to make a direct impact on clean energy operations while working with a cutting-edge data stack including Snowflake, Dagster, dbt, Modal, and GitLab.

What You'll Be Doing

Analytics Infrastructure & Data Warehouse Management

• Design, deploy, and maintain scalable data infrastructure to support enterprise analytics and reporting needs
• Manage Snowflake instances, including performance tuning, security configuration, and capacity planning for growing data volumes
• Optimize query performance and resource utilization to control costs and improve processing speed

Data Pipeline Development & Orchestration

• Build and orchestrate complex ETL/ELT workflows using Dagster to ensure reliable, automated data processing for asset management and energy trading
• Develop robust data pipelines that handle high-volume, time-sensitive energy market data and asset generation and performance metrics
• Implement workflow automation and dependency management for critical business operations

Data Transformation & Analytics Support

• Develop and maintain dbt models to transform raw data into business-ready analytical datasets and dimensional models
• Create efficient SQL-based transformations for complex energy market calculations and asset performance metrics
• Support advanced analytics initiatives through proper data preparation and feature engineering

Data Quality & Governance

• Implement comprehensive data validation, testing, and monitoring frameworks to ensure accuracy and consistency across all energy and financial data assets
• Establish data lineage tracking and privacy controls to meet regulatory compliance requirements in the energy sector
• Develop alerting and monitoring systems for data pipelines, including error handling, SLA monitoring, and incident response

CI/CD & DevOps

• Lead continuous integration and deployment initiatives for Dagster and dbt pipelines, and Streamlit/Gradio application deployments to Linux servers
• Implement automated testing and deployment automation for data pipelines and analytics applications
• Manage version control and infrastructure as code practices

Cross-functional Collaboration

• Partner with Analytics Engineers, Data Scientists, and business stakeholders to understand requirements and deliver solutions
• Work closely with asset management and trading groups to ensure real-time data availability for market operations and risk calculations
• Collaborate with credit risk teams to develop data models supporting financial analysis and regulatory reporting
• Translate business requirements into technical solutions and communicate data insights to stakeholders

Documentation & Security

• Create and maintain technical documentation, data dictionaries, and onboarding materials for data assets
• Implement role-based access controls, data encryption, and security best practices across the data stack
• Monitor and optimize cloud infrastructure costs, implement resource allocation strategies, and provide cost forecasting

What You'll Bring

• Experience: 4+ years of hands-on data engineering experience in production environments
• Education: Bachelor's degree in Computer Science, Engineering, or a related field
• Data Orchestration: Proficiency in Dagster for pipeline scheduling, dependency management, and workflow automation; Airflow experience a plus
• Cloud Data Warehousing: Advanced-level Snowflake administration, including virtual warehouses, clustering, security, and cost optimization
• Data Transformation: Proficiency in dbt for data modeling, testing, documentation, and version control of analytical transformations
• Programming: Strong Python and SQL skills for data processing and automation
• CI/CD: 3+ years of experience with continuous integration and continuous deployment practices and tools; proficiency in GitLab CI/CD required (GitHub Actions experience a plus)
• Database Technologies: Advanced SQL skills, database design principles, and experience with multiple database platforms
• Cloud Platforms: Proficiency in AWS/Azure/GCP data services, storage solutions (S3, Azure Blob, GCS), and infrastructure as code
• Data Integration: Experience with APIs, various data connectors, and formats
• Data Security: Understanding of data security best practices, access controls, encryption, and role-based access management
• AI & LLM Proficiency: Practical experience integrating and leveraging large language models (e.g., OpenAI, Anthropic, or open-source models) within data workflows; ability to apply LLMs efficiently and securely, with awareness of data privacy boundaries, prompt injection risks, and responsible AI usage in production environments
• Problem-Solving: Strong analytical and troubleshooting skills with attention to detail
• Communication: Ability to work effectively with both technical and business stakeholders
• Work Style: Comfortable with a hybrid work environment (2-3 days in office); highly autonomous and self-directed with a strong work ethic and growth mindset; exceptional attention to detail; able to take ownership of projects end-to-end with minimal oversight

What Would Be Nice

• Experience in the energy, utilities, or financial services industries
• Knowledge of energy trading concepts, market data, or asset management
• Familiarity with data governance frameworks and regulatory compliance (SOX, GDPR, CCPA)
• Experience with infrastructure as code (Terraform, CloudFormation)

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Hybrid

Supervisor Engineer (team lead), Software Support

At ASM, our Software Engineering teams works on delivering software that has immediate, tangible results visible in the operation of semiconductor processing equipment hardware. The hardware includes robotics, gas valves, temperature controllers and other hardware.  

As a Supervisor Engineer, Software Support, you will make an impact by investigating, recreating, and troubleshooting software issues to resolution as reported by our customers. 

Responsibilities:

• Oversee the day-to-day operations of the support team, including task assignment, workload distribution, and monitoring punctuality and backlog management.
• Act as the final point of contact for complex or high-priority customer escalations, ensuring timely and effective resolution.
• Provide coaching and professional development for staff, identifying training needs and creating individualized development plans.
• Gather information to investigate the issue, reproduce it, determine the root cause, and recommend corrective actions. 
• Guide your team members to create bug reports for the developer to use when fixing the bug. 
• Travel to customer sites to support installations, training, and troubleshooting of ASM products. 
• Talking to the account team and GPS group (not directly with the customer) when investigating reported issues. 

Minimum Qualifications 

• BS+ 8 years or MS+ 4 years in Computer Science, Computer Engineering, or a related field. 
• Proven ability to motivate, inspire, and foster a collaborative team culture.
• Strong troubleshooting skills in hardware and software, with familiarity data structure, networking, algorithm and modern operating systems (Windows).
• Software development or test (QA) experience. 
• Ability to travel 10-25% domestic and international.

Preferred Qualifications 

• Preferred expertise in C++, C#, Python, Gitlab\Github.  
• Experience with semiconductor equipment preferred 
• Experience working with two or more of the following is preferred: software for machine control, Semiconductor Factory Automation, Multi-threaded applications, real-time software, device drivers, or other interrupt-driven software 

We are seeking a skilled Engineer II, Electrical Engineering, to join our team, focusing on the design, development, and troubleshooting of electrical circuits for semiconductor tools. This role is pivotal in ensuring the safety and efficacy of our electrical systems, while collaborating with cross-functional teams to create cohesive tool architectures. 

Responsibilities: 

• Design, develop, test, and troubleshoot electrical circuits related to semiconductor tools 

• Ensuring safety is a priority in design and operation, utilizing safety-rated devices 

• Research and select components that meet tool requirements 

• Collaborate with cross-disciplinary teams to design unified tool architecture 

• Create schematic and cable designs 

• Adhere to the company's Engineering Change Order (ECO) process 

• Review documents meticulously, adapt to changes, handle tasks independently, and manage time effectively 

• Work closely with designers and drafters to generate detailed documentation 

• Understanding of pneumatics and PCB design is advantageous 

 Required Skills: 

• Bachelor’s degree in electrical engineering or related field 

• Proven experience in electrical circuit design and troubleshooting 

• Strong knowledge of safety standards and practices 

• Excellent verbal and written communication skills 

• Proficiency in technical writing 

• Familiarity with recognized safety and machinery standards such as NEC, NFPA 79, UL 508A, FM 4910, ISO 13849, EN/IEC 60204-1 & -33, SEMI specifications is a plus 

• Extensive Experience with AutoCAD (Cable Drawing and Schematic) 

• Experience in Design/Component selection 

Your Impact

Axon is committed to improving public safety by developing cutting-edge, innovative technologies. Known for developing the original TASER energy weapon, the Axon engineering team is tasked with continual excellence to keep the organization at the forefront of the market.

Mechanical Design Engineers at Axon have full design ownership over next generation life-saving technology from conceptualization through production, who's work is highly visible to even the most senior executives. our passionate leadership and cross-functional collaboration with product managers, electrical engineers, industrial designers, and manufacturing teams is vital to the success of the team and ensuring the safety of the general public for generations to come.

What You'll Do

Location: Scottsdale, AZ 

• Drive innovative product development from conceptualization to manufacturing
• Utilize creative problem solving skills to lead ideation of new product architectural concepts for subsystem and system level designs
• Construct and analyze high fidelity proof-of-concept prototypes
• Perform detailed mechanical analysis to ensure proper function through FEA, tolerance analysis, testing, and other exploratory means
• Collaborate regularly with both domestic and international stakeholders
• Work autonomously and collaboratively in an empowering and fast-paced environment
• Hone your engineering expertise in a dynamic learning environment focused on personal and professional development

What you bring

• Bachelor’s degree in Mechanical Engineering or equivalent experience
• L9: Minimum 12 years of product design experience in high-end consumer electronic products
• Experience providing technical leadership for teams of 2-5 mechanical engineers
• Proficiency with Creo or similar 3D CAD software
• Knowledge in the design of plastic injection molded, stamped metal, die-cast, and machined parts
• Familiarity with adhesives and bonded joint design
• Experience designing for a high level of dust/water ingress protection
• Experience designing thermal management solutions for dissipating heat from electronics
• Experience with PCB/PCBA flex circuit and other electro-mechanical integration
• Strong DFM/DFA skills, with emphasis on part/assembly tolerance management, to ensure robust designs for high volume manufacturing
• Experience collaborating with external consultants, vendors and manufacturers, including willingness to travel internationally
• Ability to interpret product requirements and translate into quantifiable engineering deliverables
• Experience preserving Industrial Design and UX intent in mechanical design implementation
• Effective communication and strong presentation skills
• Ability to balance and prioritize conflicting design constraints through analysis, testing, and creativity
• Collaboration with peers in a candid cross-functional team culture

Benefits that Benefit You

• Competitive salary, bonus, RSUs, and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• And yes, we have snacks in our offices

Benefits listed herein may vary depending on the nature of your employment and the location where you work

Your Impact

We are developing the next generation of mission-critical communications systems to builds mission-critical devices used by public-safety professionals worldwide. As a Staff Wireless Software Engineer, you will be a technical leader driving architecture and implementation of wireless protocol stacks, transport abstraction layers, and real-time communication systems across our devices. You will operate at the intersection of RF, embedded systems, and cloud-connected software.

This is a hands-on technical role with broad architectural influence.

Work Location: This role is eligible to be based out of Axon's US hubs in Atlanta, Boston, Scottsdale (HQ), San Francisco, or Seattle, and follows a hybrid schedule. We rely on in-person collaboration and ask that team members work onsite 4 days per week, Tuesdays through Fridays, with the flexibility to work remotely on Mondays, unless there is an approved workplace accommodation. We believe that connection fuels innovation, and our in-office culture is designed to foster meaningful teamwork, mentorship, and shared success.

Reports to: VP of Software Engineering
Direct Reports: 0

What You'll Do:

You will be tasked with solving the toughest wireless problems our products face: translating research into resilient, high-performance PHY/MAC systems; architecting firmware and toolchains that meet extreme latency, power, and reliability targets; and defining the wireless roadmap that balances innovation, manufacturability, and real-world performance. You will shape how our devices connect and perform at scale — from lab prototypes to deployed fleets — and your work will be judged by field performance under real conditions, not just simulations. This mission-critical wireless systems require both RF understanding and deep systems software expertise. This position sits at that boundary and defines the reliability and trust of the entire communications platform..

• Lead design and implementation of wireless communication stacks (LTE, 5G, Wi-Fi, sidelink, mesh, P2P, WiFi, Bluetooth, NFC....)
• Architect low-latency, high-reliability PTT and real-time voice transport systems
• Develop transport abstraction layers across multiple radios and networks
• Optimize performance (latency, jitter, packet loss, handover behavior)
• Collaborate with RF, hardware, and firmware teams to ensure end-to-end system performance
• Drive modem integration (e.g., Qualcomm, MediaTek) and carrier certification efforts
• Implement QoS, prioritization, and congestion control mechanisms
• Contribute to secure communication layers (encryption, key management, secure boot integration)
• Define metrics and instrumentation for wireless performance at scale
• Mentor engineers and set technical direction across projects

What You Bring

• 10+ years experience in wireless software development
• Strong C/C++ experience in embedded or systems environments
• Deep understanding of wireless protocols (LTE, 5G NR, Wi-Fi, Bluetooth, sidelink, or mesh)
• Experience working with modem vendors (e.g., Qualcomm SDKs)
• Experience with real-time systems and low-latency audio transport
• Strong networking fundamentals (TCP/IP, UDP, RTP, QUIC, QoS)
• Familiarity with RF performance constraints (RSSI, SINR, handovers, link budgets)
• Experience debugging packet-level and radio-layer issues

Additional preferable skills:

• Experience with mission-critical communications (LMR, MCPTT, public safety)
• Experience with 3GPP standards (Rel 16+)
• Experience with 5G sidelink (PC5) or device-to-device protocols
• Experience implementing mesh or MANET routing
• Knowledge of secure communications (AES, TLS, PKI, FIPS environments)
• Familiarity with Android/Linux device platforms
• Experience with satellite backhaul or hybrid transport systems

Benefits that Benefit You

• Competitive salary and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• Employee Resource Groups (ERGs)
• And yes, we have snacks in our offices

Benefits listed herein may vary depending on the nature of your employment and the location where you work.

Your Impact

Axon Records is a cloud-based records management system that modernizes how law enforcement agencies capture, manage, and access data. It streamlines report writing and approval workflows with structured data entry, real-time collaboration, and intelligent automation. Our product’s north star is to make an impact on the world by reducing the amount of time officers spend at their desks writing reports and increase the amount of time officers spend out in their communities helping the public.

You are a Staff Full Stack Software Engineer with experience building large-scale software applications. You have deep interest in backend technologies. You are also familiar with frontend and mobile technologies and challenges. You are excited about the care, feeding and growth of a scalable cloud-based systems and the engineering organizations that build them. You can instill new ideas into our engineering architecture and organization to help lead us into the next phase of scale and growth of our Records Management system.

Come work in an exciting environment where you use your passion, experience, and analytical skills to help bring new solutions to public safety and leave a positive impact on the world.

What You’ll Do

Work Location: This role is based out of our Boston Office and follows a hybrid schedule. We rely on in-person collaboration and ask that team members work onsite Tuesdays through Fridays, with the flexibility to work remotely on Mondays, unless there is an approved workplace accommodation. We believe that connection fuels innovation, and our in-office culture is designed to foster meaningful teamwork, mentorship, and shared success.
Reports to: Director, Software Engineering

• Lead engineering architecture design reviews
• Set a high technical bar for the team through code and architecture design reviews
• Mentoring engineers
• Working across teams with Product, Design, and Engineering to solve some of our biggest technical challenges within our stack for our customers
• Improve our Engineering process, including long-term thinking, sprint planning and stand-ups
• Building services that adhere to our high bar on availability and latency in this mission-critical space
• Working with the latest open source technologies

What You Bring

• 8+ years of experience in full stack software engineering
• A bachelor’s degree in Computer Science, Engineering, or a related technical field (or equivalent
• Experience building complex and impactful software in a team environment
• Experience designing and delivering high-availability, scalable cloud-based systems
• You write beautiful, simple, maintainable code for backend microservices
• Deep skill in driving technical solutions across multiple teams
• Backend service experience in managed languages such as Go, Java, Scala
• Frontend experience in Javascript + Typescript, React,
• Strong experience with database, especially SQL 
• Interest in helping to set the technical and organizational direction for a growing engineering team across multiple global locations

Benefits that Benefit You

• Competitive salary and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• Employee Resource Groups (ERGs)
• And yes, we have snacks in our offices

Benefits listed herein may vary depending on the nature of your employment and the location where you work.

Your Impact

Axon Records is a cloud-based records management system that modernizes how law enforcement agencies capture, manage, and access data. It streamlines report writing and approval workflows with structured data entry, real-time collaboration, and intelligent automation. Our product’s north star is to make an impact on the world by reducing the amount of time officers spend at their desks writing reports and increase the amount of time officers spend out in their communities helping the public.

You are a Staff Full Stack Software Engineer with experience building large-scale software applications. You have deep interest in backend technologies. You are also familiar with frontend and mobile technologies and challenges. You are excited about the care, feeding and growth of a scalable cloud-based systems and the engineering organizations that build them. You can instill new ideas into our engineering architecture and organization to help lead us into the next phase of scale and growth of our Records Management system.

Come work in an exciting environment where you use your passion, experience, and analytical skills to help bring new solutions to public safety and leave a positive impact on the world.

What You’ll Do

Work Location: This role is based out of our Seattle Office and follows a hybrid schedule. We rely on in-person collaboration and ask that team members work onsite Tuesdays through Fridays, with the flexibility to work remotely on Mondays, unless there is an approved workplace accommodation. We believe that connection fuels innovation, and our in-office culture is designed to foster meaningful teamwork, mentorship, and shared success.
Reports to: Director, Software Engineering

• Lead engineering architecture design reviews
• Set a high technical bar for the team through code and architecture design reviews
• Mentoring engineers
• Working across teams with Product, Design, and Engineering to solve some of our biggest technical challenges within our stack for our customers
• Improve our Engineering process, including long-term thinking, sprint planning and stand-ups
• Building services that adhere to our high bar on availability and latency in this mission-critical space
• Working with the latest open source technologies

What You Bring

• 8+ years of experience in full stack software engineering
• A bachelor’s degree in Computer Science, Engineering, or a related technical field (or equivalent
• Experience building complex and impactful software in a team environment
• Experience designing and delivering high-availability, scalable cloud-based systems
• You write beautiful, simple, maintainable code for backend microservices
• Deep skill in driving technical solutions across multiple teams
• Backend service experience in managed languages such as Go, Java, Scala
• Frontend experience in Javascript + Typescript, React,
• Strong experience with database, especially SQL 
• Interest in helping to set the technical and organizational direction for a growing engineering team across multiple global locations

Benefits that Benefit You

• Competitive salary and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• Employee Resource Groups (ERGs)
• And yes, we have snacks in our offices

Benefits listed herein may vary depending on the nature of your employment and the location where you work.

Job's mission

What you will be working on

What we are looking for

What sets you apart

Benefits:

• Health insurance (medical, dental, vision)
• 401(k)Retirement plan
• Paid time off (vacation, sick, flex, and holiday) & Parental Leave Benefit
• Life and disability insurance
• Employee assistance program (EAP), Family support, and parental consulting groups
• Healthcare Concierge
• Health Savings and Flexible Spending Accounts
• Lifestyle Spending Account / Fitness Reimbursement
• Fertility & Family Support Programs
• Wellness Program with medical premium discounts

As a Senior Software Engineer at ASM, you’ll sit at the intersection of cutting-edge software, complex hardware, and real-world customer impact. You’ll be a technical leader who solves the toughest software challenges in semiconductor manufacturing—driving system reliability, safety, and performance for our global customers. In this role, you won’t just fix issues—you’ll lead investigations, influence architecture, and deliver long-term, systemic improvements that power advanced semiconductor technology worldwide.

What You’ll Be Working On

• Lead deep technical investigations into software-related safety interlocks, validating corrective and preventive actions.
• Analyze and optimize multiple interacting subsystems, gaining end-to-end understanding of full platform workflows.
• Drive root cause and corrective action (RCCA) using packet captures, log correlation, and system-level analysis.
• Design and evaluate subsystem architectures, including multi-threading and scheduler interactions.
• Develop, test, deploy, maintain, and continuously improve software for advanced semiconductor manufacturing equipment.
• Troubleshoot complex software issues, including real-time control systems.
• Act as a technical escalation point—supporting field engineers and customers globally.
  Partner with QA and Support to reproduce field issues and strengthen regression coverage.
• Author and review system specifications, software designs, and test plans.
• Investigate internal and external technical inquiries, delivering clear analysis and actionable solutions.
• Evaluate and influence software engineering tools and system design decisions.
• Plan and coordinate rapid software fixes and deployments in high-impact environments.
• Present technical insights, progress, and outcomes in customer QBRs, including findings from complex DOE analyses.

What We’re Looking For

• Bachelor’s degree in Computer Science (or related field) with 7+ years of industry experience, or Master’s degree with 4+ years, or PhD with 3+ years of relevant experience
• Strong software development expertise in C++ and/or C#
• Solid understanding of multi-threaded applications
• Experience working with software documentation, specifications, and APIs
• Good knowledge of software memory architecture and debugging

What Sets You Apart

• Advanced degree (Master’s or PhD) and experience in software architecture and machine control systems, ideally within semiconductor equipment
• Hands-on experience with GUIs, device drivers, and interrupt-driven software
• Knowledge of data communications, networking, and EtherCAT
• Understanding of dynamic scheduling algorithms and deadlock avoidance
• Proficiency with development tools such as debuggers, application builders, and configuration management systems
• Ability to triage and diagnose mechanical, electrical, and software issues holistically
• Strong analytical skills, including designing and interpreting complex DOEs using multivariate methods or PCA

As a Principal Engineer, Global Product Management at ASM, you’ll have the opportunities to get involved in a wider scope of work compared to our larger competitors. While the workload is challenging, you are given the independence and autonomy to perform at your peak. This work requires being innovative, so you must have the ability to collaborate with others to deliver creative solutions, work well under pressure and pay great attention to small details.

This position is responsible for product management & technical marketing activities within the Product Management group. Every day is different, working with different customers and different products. This role is for someone who enjoys and is intellectually curious about the whole process and being part of it. You get to work external global customers that have many different needs and you will be part of the solution.  

Key Responsibilities:

• Product Life Cycle – Drive the product life cycle from concept to high volume manufacturing to obsolescence
• Roadmaps – Maintain product roadmap for a portfolio of products, periodically update roadmap through discussions with customers and internal experts, align product priorities and resources to roadmap
• Customer Engagement – Support Technical Meeting with customers, create and manage customer presentations, detailed market and competitive analysis
• MRS – Own the market requirement spec documents and ensure product development priorities align with MRS and customer needs
• Strategic Marketing – Prepare market strategies for executive R&D expenditure requests, develop roadmap and product strategy presentations for executives within ASM
• Financial – Work with finance department on NPV and IRR for products, maintain cost of ownership models
• Business Planning and Market Analysis – Attend company operation/planning meeting, create Business plan/Operation review materials, create business forecast based on market information, support budget planning, competitive analysis
• Drive teams internally to meet set products profit gross margins
• New Product Introductions – Detailed market analysis for inflections, development of business plans, internal executive alignment, positioning of products
• Support technical activities – Work with product development teams on specifications and data collection requirements, manage customer demo requests, prioritization of product development activities
• Supplier Engagement – Develop key capabilities for new products through collaboration with suppliers
• Product Promotion – Create promotional materials for conferences and launches, Sales and product support training, Introductions to Customer

Requirements:

• 10+ years of semiconductor / capital equipment industry experience, of which a significant portion has been in technical marketing and / or product management roles
• Masters or PhD in Material Science, Electrical/Chemical/Mechanical Engineering or equivalent
• Process, hardware, or device experience in semiconductors or capital equipment
• ALD or CVD experience is a plus
• High level of proficiency or deep understanding of capital equipment systems in semiconductor or similar industry
• Direct customer engagement or supplier management
• Ability to work with multiple internal disciplines on portfolio of products
• Understanding of product life cycle and technical marketing
• Ability to travel globally

Job Description

The Director, Site Reliability Engineering plays a critical role in ensuring the continuous and reliable operation of SmartRent services at the property level. This role drives system reliability, oversees property health, and partners closely with Engineering and Support teams to develop scalable processes and observability tools that sustain operational performance and deliver consistent client value.

Responsibilities

• Own property-level system reliability outcomes, including oversight of device-only networks and overall property health performance. 
• Drive adoption and effective utilization of SmartRent tools and services across properties through monitoring, insights, and continuous improvement efforts.
• Establish proactive detection and response frameworks to identify localized system issues and lead coordinated cross-functional resolution efforts. 
• Provide leadership oversight of property transfers and escalated issues, ensuring consistent resolution standards and service continuity. 
• Partner with Engineering leadership to design and implement observability tools and processes that enable scalable monitoring of system health and events.
• Define, document, and enforce standardized operational processes to ensure consistency, accountability, and cross-functional alignment. 
• Collaborate with Support leadership to develop dashboards and reporting capabilities that deliver actionable insights into property engagement, activity, and performance trends. 
• Lead the strategic oversight of IoT support operations, including installation support workflows and escalation management frameworks. 
• Oversee validation and controlled deployment of IoT firmware updates across hubs and connected devices to ensure reliability and minimize operational risk.
• Establish and maintain data integrity standards at the property level while contributing domain expertise to enterprise knowledge resources and training materials.

Required Qualifications

• Demonstrated experience in network operations, including both wired and wireless environments. 
• Experience utilizing observability and monitoring tools (e.g., Datadog, Observe, or similar platforms). 
• Strong troubleshooting expertise, including developing and maintaining runbooks and technical documentation. 
• Foundational programming, scripting, and automation skills; ability to leverage automation to improve operational efficiency is required. 
• Working knowledge of cloud-based infrastructure, such as AWS or comparable platforms. 
• Significant operational experience with a proven ability to design, implement, and sustain clear, scalable processes that teams consistently follow.
• Strong cross-functional collaboration skills, with experience working across internal teams to resolve complex operational issues and achieve shared goals.

Preferred Qualifications

• Demonstrated business acumen, including the ability to connect reliability and operational efforts to measurable business and customer value.
• Experience translating technical reliability outcomes into clear customer-facing or executive-level value narratives.

** This position is not eligible for visa sponsorship. Candidates cannot require sponsorship now or in the future**

We are seeking a highly skilled Senior Mechanical Engineer with 5+ years of professional experience and a Bachelor’s degree in Mechanical Engineering to lead the design, development, and evaluation of advanced mechanical and electromechanical systems.

Key Responsibilities

• - Design complex mechanical and electromechanical subsystems and systems.
• - Develop detailed manufacturing and testing specifications and methods.
• - Evaluate mechanical systems and products using engineering principles.
• - Confirm system and product capabilities through feasibility studies and testing.
• - Drive product development by reviewing requirements and researching materials.
• - Ensure system and product quality through testing and validation.
• - Provide engineering guidance and mentor junior personnel.
• - Maintain compliance with government and industry regulations.
• - Maintain technical documentation and system data.
• - Support cross-functional engineering initiatives.

Required Skills & Qualifications

• - Strong capabilities in requirements analysis, design skills, conceptual skills, and presenting technical information.
• - Experience in Fluid Systems and Wet environments
• - Knowledge of Complex motor drive system
• - Stress Analysis of large Frame
• and other sub-systems
• - Demonstrated quality focus, technical depth, and job knowledge.
• - Bachelor’s degree in Mechanical Engineering.
• - Minimum 5 years of mechanical engineering experience.
• - Proficiency with Siemens NX, Team Center, AutoCAD, SolidWorks, and PDM systems.
• - Excellent communication and collaboration skills.
• - Strong attention to detail and analytical thinking.
• - Proven ability to work under strict deadlines.

Knowledge of Chemical Mechanical Planarization Tool would be beneficial.

** This position is not eligible for visa sponsorship. Candidates cannot require sponsorship now or in the future**

We are seeking a highly skilled Senior Mechanical Engineer with 10+ years of professional experience and a Bachelor’s degree in Mechanical Engineering to lead the design, development, and evaluation of advanced mechanical and electromechanical systems.

Key Responsibilities

• - Design complex mechanical and electromechanical subsystems and systems.
• - Develop detailed manufacturing and testing specifications and methods.
• - Evaluate mechanical systems and products using engineering principles.
• - Confirm system and product capabilities through feasibility studies and testing.
• - Drive product development by reviewing requirements and researching materials.
• - Ensure system and product quality through testing and validation.
• - Provide engineering guidance and mentor junior personnel.
• - Maintain compliance with government and industry regulations.
• - Maintain technical documentation and system data.
• - Support cross-functional engineering initiatives.

Required Skills & Qualifications

• - Strong capabilities in requirements analysis, design skills, conceptual skills, and presenting technical information.
• - Experience in Fluid Systems and Wet environments
• - Knowledge of Complex motor drive system
• - Stress Analysis of large Frame
• and other sub-systems
• - Demonstrated quality focus, technical depth, and job knowledge.
• - Bachelor’s degree in Mechanical Engineering.
• - Minimum 10 years of mechanical engineering experience.
• - Proficiency with Siemens NX, Team Center, AutoCAD, SolidWorks, and PDM systems.
• - Excellent communication and collaboration skills.
• - Strong attention to detail and analytical thinking.
• - Proven ability to work under strict deadlines.

Knowledge of Chemical Mechanical Planarization Tool would be beneficial.

Your Impact

As a Senior member of the TASER Electrical Engineering team, you will drive and engage in innovative hands-on design, development, and testing of cutting-edge electronics that are integral to Axon TASER Products. You will apply strong technical expertise and sound engineering judgment to deliver robust, high-quality designs that meet rigorous product and regulatory requirements. In this role, you will own substantial portions of circuit and subsystem designs, support system-level architecture decisions, and collaborate with cross-functional partners across product engineering, firmware, new product introduction, manufacturing, and quality teams. You will also mentor junior engineers and contribute to raising the technical bar within the team while continuing to grow your own technical leadership capabilities. Join a passionate engineering team dedicated to overcoming complex challenges, and help deliver technologies that positively impact Law Enforcement, Public Safety, and their surrounding communities.

Your Day-to-Day

• Research, propose, and develop innovative, industry-leading circuit designs for products such as TASER energy weapons, TASER-enabled devices, wirelessly connected TASER products, and related accessories
• Design, develop, and verify system circuitry and hardware aligned with project objectives and requirements
• Using OrCAD Schematic tools, design embedded Mixed-Signal electronic circuitry that integrates high voltage power supply circuitry, microcontrollers, flashlight/indication/display circuitry and drivers, memory devices (FLASH/EEPROM), switch-mode and linear power supplies, batteries, data interfaces (UART, SPI, I2C, USB), RF transceivers, electromechanical transducers, and other discrete digital and analog components
• Collaborate with PCB designers to guide layout implementation and review designs for signal integrity, power integrity, manufacturability, and reliability using Cadence layout tools
• Collaborate with cross-functional engineering teams, technology partners, and manufacturing teams to oversee electronics development throughout the entire product lifecycle, from concept to mass production
• Lead schematic and layout design inspections to improve the quality of design releases and product reliability
• Develop test methods and create test plans to evaluate and validate designs effectively
• Bring up, characterize, and debug systems and circuits using lab tools such as oscilloscopes, multimeters, logic analyzers, power supplies, hi-pot testers, etc.
• Evaluate and document design outcomes, test results, and related information, then present findings to the design teams for review and further action
• Support regulatory compliance efforts (FCC, CE, IEC, etc.) through design best practices and debug activities
• Optimize performance of electronics design using simulation tools and hands-on measurements
• Develop, evaluate, and help finalize assembly drawings, bill of materials, Geber files, and other design documentation needed for product release
• Partner with new product introduction team to develop and define test requirements documentation for PCBA board level testers and system functional test fixtures on the production line
• Mentor junior engineers and contribute to team knowledge sharing

Basic Qualifications

• Bachelor’s degree in Electrical Engineering or similar engineering discipline
• 6+ years of industry leading electronics design experience with emphasis on designing densely populated, tightly packaged, power control and delivery systems in embedded electronics
• Highly proficient in engineering processes and expectations across all design phases, with the ability to lead hardware design and development from concept through to mass production release
• Experienced system-level design engineer skilled in creating designs that meet product requirements. Proficient in collaborating with product and engineering teams to navigate design trade-offs and selections, ensuring a meticulous approach to minimize errors and deliver successful results
• Proficient in power supply design and selection based on product needs and trade-offs. Experienced in designing with switch-mode power supplies (buck, boost, buck/boost, and flyback), including circuit operation and component selection for custom applications. Strong background in high-voltage power supply design, with expertise in developing, testing, and characterizing custom magnetics considered a significant plus
• Demonstrated expertise and ownership of electronics architecture/design/integration and verification testing in several of the following areas: embedded microcontrollers, power supply design (switch-mode and linear regulators), power delivery networks, motor controllers, memory subsystems (FLASH/EEPROM), high speed and low speed communication interfaces (USB, UART, SPI, I2C), high power interfaces, battery specific applications, battery chargers, high power LED and driver design, and RF subsystem integration
• Experience designing products for electromagnetic compatibility and protecting circuitry against electromagnetic interference and electrostatic discharge events. Familiar with typical EMI/ESD filtering and protection techniques, as well as snubber circuitry design.
• Collaborates effectively with firmware engineering to develop and debug embedded electronic systems
• Strong hands-on proficiency with electronics bring-up, characterization, and debug using laboratory tools: Oscilloscope, power supplies, multimeters, custom jigs, etc.
• Proficient schematic design skills using industry leading design tools, including BOM development. Experience with Cadence/OrCAD desired. Experience developing rigid, flex, and rigid-flex PCB designs.
• Skilled in leading and collaborating with PCB and mechanical design engineers to develop PCB layouts that align with design requirements.
• Experience supporting products through regulatory compliance testing
• Independent contributor capable of developing products within cross-functional and geographically diverse engineering teams
• Strong proficiency in documentation, analysis, and presentation tools, including Word, Excel, and PowerPoint

Preferred Qualifications

• Experience designing tightly packaged, hand-held embedded systems powered by rechargeable batteries, including development with embedded microcontrollers and integration of electromechanical components such as solenoids

Benefits that Benefit You

• Competitive salary and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• And yes, we have snacks in our offices

Your Impact

Law enforcement agencies need training systems informed by real data about how officers perform in the field. We've spent the last few years collecting that data and validating the data products that create actionable insights that trainers can use to make encounters more effective, less injurious, and safer for everyone involved. We've shipped the simple models, but now we need to get our customer-validated models into production. Your job is not just to ship them, but to ensure that we have a strategic pipeline to continue delivering data products for our customers for years to come. What works in research needs to be production-grade, reliable, and reusable.

We're a small, technically deep team embedded in Axon's TASER pillar. Our work spans hardware telemetry and behavioral science — we analyze TASER device data, build models that drive training recommendations for law enforcement agencies, and ship the analytical tools that get those insights to the people who can act on them. Our analyses reach the C-suite. Our models become user-facing features. We're working toward Axon's Moonshot: reduce fatal officer-involved shootings by 50% in the next decade.

The head of product was a Staff Engineer. Our TPM ran a 60-person engineering organization. Both product managers have quantitative degrees — applied mathematics and engineering. Our program manager for TREND is a former state police lieutenant with over 30 years of experience in law enforcement. Our designer is part of the team, not separated from it. We built this team to cover the full space — engineering, data, product, and domain — and this hire is the next deliberate addition.

This is the opposite of a silo — and it comes with a tradeoff: you won't always have another SWE in the room, so you'll need to be technically self-sufficient. What you get in return is a team with more depth of experience per person than most engineering environments you've worked in.

What You’ll Do

Location: This role is based out of one of our US-based offices (Seattle or Scottsdale) and follows a hybrid schedule. We rely on in-person collaboration and ask that team members work onsite Tuesdays through Fridays, with the flexibility to work remotely on Mondays, unless there is an approved workplace accommodation.
Reports to: Director, TASER Data Science

• Build and ship data products: dashboards, metrics systems, and recommendation tools that drive real decisions
• Own production ML deployment — bring models from research to reliable production systems with monitoring, versioning, and operational rigor
• Build and own data pipelines from TASER device telemetry through to analytics surfaces used by agencies and internal stakeholders
• Set technical direction for the team's engineering practices — the data scientists here write code and want to do it better; you'll be the senior engineering voice they've been missing
• Work across the full stack — device-side data ingestion through user-facing analytics — and move between projects to build breadth
• Use AI tools as a core part of your development workflow, not a novelty

What You Bring

Must-haves:

• You write production code at a high standard — strongly typed, comprehensively tested, designed for the people who will maintain it after you. We write Python like software engineers, not data scientists.
• You've deployed and operated ML systems in production: model serving, monitoring, failure handling, and the operational rigor that keeps them running
• You identify the most important technical work and go after it — you've shaped technical roadmaps, influenced peers and organizational direction, and moved goals forward with or without explicit direction
• You define the problem as much as you solve it — you thrive in a team where requirements evolve as you learn, and you see that as a feature, not a bug
• You've worked with real-world messy data: device logs, behavioral data, event streams, or similar

Strong preferences:

• Advanced degree in a quantitative or analytical field — PhDs are very welcome, we already have three
• Intellectual background outside computer science is genuinely valued here: statistics, physics, engineering, biology, economics, linguistics, philosophy — it doesn't have to be a "hard science." We hire for intellectual diversity because it makes the work better.
• Hands-on experience with ML production tooling: model registry, serving infrastructure, pipeline orchestration, and model monitoring
• Experience with cloud data platforms in an ML context (Azure ML, Databricks, Snowflake) and batch or streaming pipeline architecture
• Experience with hardware-adjacent data: device telemetry, IoT event logs, or similar

Benefits that Benefit You

• Competitive salary and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• Employee Resource Groups (ERGs)
• And yes, we have snacks in our offices

Benefits listed herein may vary depending on the nature of your employment and the location where you work.

Your Impact

As an RF Test Engineer, your work will be essential in ensuring that the wireless technologies in Axon's advanced products meet the highest performance, reliability, and compliance standards. Your hands-on expertise will drive the rigorous testing and optimization of RF systems that enable our cutting-edge body-worn cameras, vehicular systems, and connected devices. By leveraging your technical acumen and problem-solving skills, you will be instrumental in identifying and overcoming RF challenges, ensuring robust designs that operate seamlessly in diverse and demanding environments.

You will collaborate with cross-functional teams and global partners to verify and refine wireless designs, using state-of-the-art tools and methodologies. Your work will directly contribute to the development of reliable, high-performance solutions that serve Law Enforcement, Public Safety, and the communities they protect. Through your efforts, you will help deliver transformative technologies that empower public safety professionals and redefine industry standards.

What You’ll Do

• Design and implement test plans to evaluate the performance of wirelessly connected devices, ensuring they meet stringent product and regulatory requirements.
• Record RF test data and organize results, creating clear, actionable reports.
• Present findings and recommendations to cross-functional teams, enabling swift resolution of design challenges.
• Evaluate RF performance characteristics such as Total Radiated Power (TRP), Total Isotropic Sensitivity (TIS), and other over-the-air (OTA) metrics for cellular-enabled wireless devices using advanced equipment. (CMX500 and CMW500 in controlled chamber environments).
• Use instruments like spectrum analyzers and radio communication testers to assess conducted performance of wireless technologies, including LTE, 5G, Wi-Fi, Bluetooth, and GNSS.
• Support product field evaluations to validate RF performance under diverse real-world conditions, such as urban or rural environments
• As part of a collaborative team, investigate and debug issues such as poor sensitivity, low transmit power, or signal interference in wireless devices.
• Assist in the regulatory pre-certification and formal certification test efforts for hardware by preparing test samples, working closely with external test labs, troubleshooting issues, and ensuring successful completion of certification activities.
• Expand your knowledge of RF systems, testing methodologies, and certification standards while working closely with experienced engineers to develop your technical expertise and contribute to innovative designs.

What Your Bring

• Bachelor’s degree in Electrical Engineering, RF Engineering or similar discipline.
• Minimum of 3 years of hands-on embedded RF and wireless device testing experience
• Minimum of 3 years of wireless device test plan development for evaluating performance of various wireless interfaces against system and product requirements
• Solid understanding of basic RF principles and theory, familiar with basic RF technology circuitry stages and topologies.
• Experience characterizing RF components such as filters, switches, passives and signal paths.
• Experience testing modern RF hardware including multiband Wi-Fi, Bluetooth, Cellular (LTE, 5G FR1), and multi-constellation GNSS at the circuit, subsystem and device levels. Cellular experience is a must-have.
• High level of familiarity of cellular certification processes, test requirements, and test methods (PTCRB, CTIA, GCF, Carrier testing, etc), with hands on experience with device pretesting
• Familiarity of worldwide EMC and intentional radiator regulatory standards and test methods (FCC, CE, ETSI, etc). Hands on experience a plus.
• Proficient with hands-on operation of RF equipment such as RF communication testers (CMW, CMX, Litepoint), Network Analyzers, Spectrum Analyzers, RF power meters, Signal Generators, RF Test chambers
• Experience with collaborative RF debug at device and circuit level
• Familiarity reading electronics schematics, layout and mechanical drawings.
• Strong documentation and communication capabilities to effectively report test procedures, test results, and recommendations to the design team
• Motivated to operate independently, within cross-functional in-house design teams, and with external resources and test facilities.

Preferred Qualifications

• Familiar with Linux command line
• Experience with CMWrun test scripting tool

Benefits that Benefit You

• Competitive salary and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• And more...

** This position is not eligible for visa sponsorship for external candidates. Candidates cannot require sponsorship now or in the future**

Job’s mission

Our Global Sales, Services & Spares IQ and Sustaining teams are seeking Snr Engineers I & II, Field Service (level will depend on experience, degree and responsibilities. Please review below) to join ASM at a customer site (Intel) in Chandler, AZ. Domestic and International travel of at least 25% will be required for this role. As a Senior Field Service Engineer at ASM, you’ll play a critical role in supporting the advanced semiconductor equipment that powers the world’s most transformative technologies. You’ll take the lead on complex troubleshooting, guide and mentor engineers, and strengthen our partnerships by helping customers achieve stable, high‑performance fabrication environments. Your expertise will make a direct impact on tool reliability, customer satisfaction, and the next generation of ASM technology.

Shifts available:

• Shift 4 (6pm-6am)- Sun-Tu and every other Saturday
• Shift 5 (6am-6pm)- Sun- Tue and every other Wednesday 
• Shift 6 (6pm- 6am)- Wed-Fri and every other Saturday
• Shift 7 (6am- 6pm)- Wed-Sat and every other Wednesday

What you will be working on

Senior Engineer I, Field Service

• Install, maintain, and repair ASM semiconductor equipment with minimal supervision
  • Lead troubleshooting of complex tool or process issues using structured diagnostic methods
  • Perform root‑cause analysis and recommend targeted, data‑driven corrective actions
  • Review tool‑performance data to identify trends, risks, or improvement opportunities
  • Provide technical guidance and on‑the‑job coaching to less‑experienced engineers
  • Document service activities and support updates to procedures and best practices
  • Communicate solutions, progress, and expectations clearly with customer engineers
  • Participate in escalations alongside cross‑functional ASM engineering teams

Senior Engineer II, Field Service

• Serve as the senior technical lead for equipment installation, performance optimization, and recovery
• Diagnose and resolve highly complex, multi‑factor tool and process issues with limited guidance
• Lead advanced root‑cause analysis and drive long‑term corrective‑action plans that influence global engineering improvements
•  Own the customer‑technical relationship: build trust, anticipate operational needs, and act as ASM’s senior technical representative onsite
• Manage escalations end‑to‑end, aligning expectations, coordinating cross‑functional teams, and communicating clear action plans
• Guide, mentor, and develop engineers through hands‑on instruction, structured training, and knowledge‑sharing
• Champion best practices and contribute to procedure development, improvements, and field‑wide learning
•  Provide detailed field insights to R&D, product, and design teams, including support for beta tools or early‑option deployments

What we are looking for

Senior Engineer I, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 6+ years of experience, OR a Master’s degree with 4+ years of experience OR PhD degree with 0+ years of experience.
• Experience of semiconductor field service or capital‑equipment experience
• Ability to interpret electronic and electromechanical schematics
•  Experience with structured troubleshooting methodologies
• Knowledge of cleanroom and semiconductor safety protocols
• Strong written and verbal communication skills
• Ability to work independently and collaboratively in fast‑paced fab environments
• Willingness to travel domestically and internationally (minimum 25%)
• Proficiency in MS Office

Senior Engineer II, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 8+ years of experience, OR a Master’s degree with 6+ years of experience OR PhD degree with 4+ years of experience.
• Experience in semiconductor field service experience with demonstrated technical leadership
• Advanced knowledge of tool architecture, control algorithms, and multi‑factor troubleshooting
• Experience driving structured root‑cause analysis and long‑term corrective‑action plans
• Proven ability to lead escalations and manage customer‑technical relationships
• Strong communication and mentorship capabilities
• Ability to work autonomously while guiding and developing other engineers
• Willingness to travel domestically and internationally
• Proficiency in MS Office

What sets you apart

Senior Engineer I, Field Service

• Experience supporting beta tools or early‑option equipment
• Knowledge of wafer‑fab operations, robotics, vacuum systems, plasma, RF, or gas handling
• Experience writing or updating procedures or technical documentation
• Strong customer‑service approach and organizational skills
• Familiarity with structured problem‑solving methods

Senior Engineer II, Field Service

• Demonstrated leadership in complex troubleshooting programs or technical initiatives
• Experience owning customer‑technical relationships, including expectations and long‑term partnership building
• Strong capability in mentoring and developing field engineers
• Hands‑on expertise with fab robotics, vacuum systems, plasma, RF, or gas‑delivery systems
• Experience providing structured feedback to engineering or product teams
• Experience evaluating or supporting beta‑stage or early‑option tools

As a Field Service Engineer, you’ll bring the technical discipline, precision, and equipment expertise you developed in the military to support ASM’s advanced semiconductor tools and help our customers keep their fabs running at peak performance. You’ll work with the same mindset you relied on in mission‑critical environments—applying your engineering background and real‑world troubleshooting experience to technologies that power AI, 5G, cloud computing, and next‑generation devices. This is a chance to leverage the skills you gained maintaining complex systems in the field and continue building your technical mastery in a rapidly growing, high‑tech industry. 

In this role, you’ll operate at the center of cutting‑edge semiconductor manufacturing. It’s an ideal opportunity for veterans and transitioning service members who have supported sophisticated mechanical, electrical, or electronic systems and want to apply that expertise in a world‑class technology environment where every day brings new challenges to solve. 

From day one, you’ll receive structured training and hands‑on guidance from experienced engineers onsite. You’ll work with vacuum systems, plasma, chemical delivery, robotics, sensors, advanced metrology, and complex hardware‑software interactions—equipment that will feel familiar if you’ve maintained avionics, electronics, propulsion, navigation, comms, radar, robotics, or similar military systems. Your contributions will directly impact tool performance, system uptime, and customer success, forming a strong foundation for long‑term growth and a variety of career paths within ASM. 

Shifts available:

• Shift 4 (6pm-6am)- Sun-Tu and every other Saturday
• Shift 6 (6pm- 6am)- Wed-Fri and every other Saturday

What you will be working on 

• Install, maintain, troubleshoot, and repair ASM semiconductor equipment at customer sites
• Diagnose mechanical, electrical, and process issues in collaboration with senior engineering staff
• Deliver responsive, customer‑focused service with a strong commitment to safety and operational discipline
• Working in cleanroom environments while following strict safety and quality standards
• Assisting, identifying and contributing to continuous improvement efforts 
• Participate in escalations and cross‑functional problem‑solving
• Work on an assigned shift schedule supporting 24/7 manufacturing operations

What we are looking for 

• Bachelor’s or master’s degree in Mechanical Engineering, Electrical Engineering, Electromechanical Engineering, or related field
• Hands-on technical experience maintaining, repairing, or troubleshooting complex mechanical, electrical, or electronic systems
• Proven ability to diagnose complex system faults, follow technical procedures with precision, and maintain equipment in mission‑critical environments 
• Experience working under strict safety protocols, lock‑out/tag‑out procedures, and high‑reliability operational standards
• Comfort working in shift-based environments where readiness, accountability, and teamwork are essential
• Demonstratedability to stay calm under pressure, adapt quickly to changing conditions, and take ownership of equipment performance in demanding situations 
• Ability to read and interpret electronic and electromechanical schematics
• Strong troubleshooting skills and disciplined adherence to safety
• Ability to work in a cleanroom environment
• Clear and effective written and verbal communication
• Ability to work independently and collaboratively
• Willingness to travel domestically and internationally
•  Proficiency with Microsoft Office 

What sets you apart 

• Experience with equipment, gas handling, or high‑precision machinery
• Experience writing or updating technical documentation
• Background in customer‑facing or technical support roles
• Familiarity with structured problem‑solving, data analysis, or statistical methodologies
• Military experience such as Avionics Technician, Electronics Technician, Nuclear Machinist Mate, Satellite/Communications Systems Technician, or similar specialties

Why join ASM?  

With us, you will have strong long‑term growth potential at the forefront of semiconductor technology. Your first role as an FSE is the foundation - not necessarily the finish line. With clear pathways into technical leadership, operations, product roles, program management, technical sales and process engineering, ASM gives you the flexibility to grow in the direction that fits you best in an industry that makes AI possible.  

2026 is the year to join ASM as a Field Service Engineer. Apply now! 

• Bachelor’s degree in Electromechanical Engineering or related field  
• 1–3 years of technical experience in field service, or manufacturing of OEM capital equipment
• Ability to read and interpret electronic and electromechanical schematics
• Basic knowledge of safety protocols and cleanroom guidelines
• Ability to apply rules and procedures in own activities
• Ability to fully understand tool architecture and control algorithms and explain operating principals to peers
• Clear written and verbal communication skills
• Ability to work independently and in a team
• Willing to travel up to as required for the role domestically and internationally
• Knowledge of safety procedures and cleanroom guidelines
• Proficiency with MS Office

Engineer II, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 4+ years of experience, or a Master’s degree with 0 years of experience
• Experience in field service or semiconductor capital equipment
• Ability to interpret electronic and electromechanical schematics
• Experience with structured troubleshooting methodologies
• Knowledge of cleanroom and semiconductor safety protocols
• Strong communication skills, both written and verbal
• Ability to work independently and within a team
• Willingness to travel domestically and internationally
• Proficiency with MS Office

What sets you apart

Engineer I, Field Service

• Semiconductor field service or capital equipment experience
• Knowledge of wafer fab operations, robotics, vacuum systems, plasma, or gas handling
• Experience writing procedures or process documentation
• Strong customer‑service mindset and organizational skills
• Familiarity with structured problem‑solving methods
• Experience supporting escalations or beta‑site activities

Engineer II, Field Service

• Hands‑on semiconductor field service experience
• Working knowledge of wafer fab operations, robotics, vacuum systems, plasma, RF, or gas handling
• Experience leading structured root‑cause analysis
• Experience providing field data to engineering or design teams
• Background supporting beta‑stage or early‑option tools
• Familiarity with structured problem‑solving techniques
• Strong customer‑service mindset and organizational skills

Sr. Principal Engineer, Systems (Plasma & Multi-Scale Simulation Scientist)

Simulation and Modeling Hub 

Role Summary 

We are seeking a Senior Plasma & Multi-Scale Simulation Scientist to strengthen and expand plasma modeling capabilities within the Simulation and Modeling Hub (S&M-Hub). This role focuses on bridging plasma physics, surface chemistry, and feature-scale behavior to enable predictive, physics-based simulation workflows supporting advanced semiconductor process development (PEALD, PECVD, ALE, RIE). 

Key Responsibilities 

• Develop and apply plasma simulation models (fluid and hybrid CCP/ICP) 

• Bridge multiple scales including plasma–surface interactions, molecular/first-principles insights, and feature-scale behavior 

• Integrate plasma modeling with CFD, thermal, and multi-physics simulations 

• Collaborate with experimental teams to validate models using in-situ and ex-situ diagnostics 

• Translate modeling insights into actionable process and equipment guidance 

• Contribute to S&M-Hub roadmap development, best practices, and advanced modeling workflows 

Required Qualifications 

• Ph.D. in Applied Physics, Plasma Physics, Materials Science, Chemical Engineering, or related field 

• Strong background in plasma-assisted semiconductor processes (PEALD, PECVD, ALE, RIE) 

• Demonstrated experience in computational plasma modeling 

• Ability to connect fundamental modeling with experimental validation and manufacturing relevance 

Preferred Qualifications 

• Experience with first-principles, molecular dynamics, or surface reaction modeling 

• Exposure to feature-scale or device-relevant plasma simulations 

• Familiarity with multi-physics coupling and reduced-order (ROM) or hybrid modeling approaches 

• Experience in industrial R&D or advanced technology development environments 

Our Atomic Layer Deposition (ALD) Chamber Engineering team is seeking innovative and driven and experienced Mechanical Engineers to join their teams. Our ALD and team is at the forefront of developing cutting-edge technologies. As a Mechanical Engineer at ASM, you will contribute to designing, developing, and optimizing high-precision equipment. Collaborating with cross-disciplinary teams, you will play a critical role in solving complex engineering challenges, ensuring product reliability, and driving technological advancements. 

Responsibilities:

• Apply sound engineering principles, product specifications and research data to create designs for systems and products for semiconductor industry.
• Perform engineering calculations including structural, thermal and fluid dynamics problems
• Create and revise Creo Parametric CAD models and detail drawings, ranging in complexity from simple piece parts to large assemblies
• Determine feasibility of product proposals, resolve problems based on technical inputs and develop new designs maintaining product design safety criteria. Apply statistics to optimize and deliver “first time right” designs.
• Prepare product/system designs and related engineering documentation for the manufacturing and testing of prototype and production released products. The documentation shall be complete and easy to follow.
• Project management duties include report generation, schedule creation and maintenance, design reviews and interdepartmental coordination.
• Provide assistance in establishing product configuration and structures on new products and features in both development and manufacturing environments.
• Present and participate in design reviews for unique customer driven specials, product enhancements and other new designs.
• Create, manage and execute engineering project plans, including task scheduling with Gantt charts and resource and cost estimates,
• Travel to customer sites/supplier sites to participate in technical discussions.
• Assist marketing and vendors in preparation of cost estimates dealing with nonstandard options, new system features and product enhancements. 
• Support projects in conjunction with technical staff, managers and manufacturing groups. Support development, installation and testing of hardware to verify performance. Create test plans, verify and approve test procedures. 
• Interface with other organizations on new product updates and ensure a smooth transition of the product into the manufacturing cycle.
• Evaluate change requests and complete all aspects of engineering change orders.

Qualifications:

• Masters in Mechanical Engineering or related degree, PhD strongly preferred. 
• Experience in engineering, design, and development of complex mechanical systems including: reactors, vacuum chambers, gas delivery systems, pneumatics, water cooling circuits, and vacuum systems required.

Skills:

• Semiconductor capital equipment or heavy capital equipment preferred.
• Deposition product knowledge a plus (CVD, ALD, EPI, PVD)
• Knowledgeable in the requirements for CE, NFPA, Semi S2-95 and other relevant standards as applicable to semiconductor manufacturing equipment.
• Understanding of materials: metals, plastics, surface coatings and surface finishes.
• Computer background in Microsoft applications, CREO and AutoCAD.
• Proficiency in ASME Y14.5 and/or ISO 1101:2017 preferred geometric dimension and tolerance
• Has knowledge of best practices and how own area integrates with others; recommends product and process improvements.
• Able to work with a diverse team to achieve requirements and specifications on complex projects.
• Capability to provide and maintain resource coordination and reporting, interfacing with other organizations and outside vendors on resource requirements.
• A critical thinker with proven ability to create effective solutions to complex engineering problems.
• Excellent verbal and written communication; ability to present design concepts to peers and management in a professional and effective manner.
• Ability to work in a team environment with aggressive deadlines and multiple priorities while maintaining a team player attitude.
• Perform self-inspection of all work and is responsible for ensuring that all work performed adheres to documentation requirements, company policies and procedures.

Your Impact 

This role sits at the intersection of engineering and supply chain, owning component strategy from design through full product lifecycle. You will directly influence product cost, supply resilience, and scalability by driving component selection, supplier strategy, and lifecycle risk management across Axon’s product portfolio. 

What You’ll Do 

Location: Scottsdale, Arizona (HQ) 
Reports to: Director of Category Management  
Direct Reports: none 

• Partner with design engineering teams early in the NPI development process to influence component selection by leveraging your industry experience. 

• Establish strong relationships with manufacturers and their associated representatives in the electronics industry to understand product roadmaps and availability to support current and future product development.  

• Work with the sourcing team to develop and ramp component sources for new products and support the NPI team’s efforts to ensure components are purchased in a timely manner for engineering development builds.  

• Leverage your technical expertise and industry knowledge to select key strategic components to support product scalability for 5+ year lifecycles. 

• Assist the respective Category Managers and cross-functional category teams in developing and executing multidimensional commodity strategies that support the NPI work stream with an emphasis on cost optimization, time to market, technology, quality, supply continuity, supply chain consolidation, service and risk mitigation. 

• Identify and manage the implementation of cost reduction opportunities on new and existing products in collaboration with the category management and continuous engineering teams. 

• Identify risks in our current supply chain and work together with the Category Managers and Continuous Engineering team to qualify additional sources of supply for critical components on our BOM’s. 

• Manage all active BOMs in the electronic component database tool. 

• Own the development and maintenance of the EOL Maintenance Process based on incoming manufacturer Product Change Notices (PCN's). 

• Provide formal reports on obsolescence and environmental solutions for electronic components including DMSMS (Diminishing Manufacturing Sources and Material Shortages) Management, PCN’s, and EOL’s. 

• Provide input to new designs to improve product reliability and longevity. 

• Provide support to the team regarding cost, availability, and technical advantages of various component choices and manufacturer choices. 

• Ensure all existing and new internal part numbers, datasheets and descriptions are correct in our databases. 

• Generate internal standards relating to component selection. 

• Liaise with external agencies regarding reliability and component issues. 

What You Bring 

• BS in Electrical Engineering, or related field. 

• 5+ years of experience in component engineering or related roles. 

• Work experience in a new product introduction (NPI) sourcing environment is preferred. 

• Ability to coordinate cross functionally with groups such as Engineering, Quality, Global Supply Chain, Operations and Contract Manufacturers to resolve issues pertaining to component selection and use. 

• Complete understanding/working knowledge of engineering documentation (i.e., schematics, component data sheets, Gerber files, etc.) and standard document control practices (ECRs, ECOs, deviations, etc.) 

• Ability to work on multiple cross functional projects simultaneously. 

• Ability to develop strong relationships with key stakeholders to drive proper rigor in the supplier selection process. 

• Self-motivated, resourceful, and ability to work in a fast-paced environment. 

• Ability to manage rapid changes typical during the NPI development process. 

• Experience with Arena Product Lifecycle Management (PLM) or equivalent and quality management system (QMS) required. 

• Experience with schematic tools like Cadence\Altium\Siemens is a plus. 

• Experience with electronic database management tools like Silicon Expert, Z2Data, or IHS Markit preferred. 

• Experience with MS Dynamics 365 Enterprise Resource Planning (ERP) System preferred. 

• Experience with Jira project and issue tracking preferred. 

• Experience with Quip, SharePoint and other collaboration tools preferred. 

• Excellent communicator, ability to lead and influence change in the face of complexity and ambiguity.  

• Analytical, fact based with keen attention to detail. 

• Proficient in managing and understanding cross-cultural business practices. 

• Experience in electronic and mechanical component analysis and selection. 

• Familiarity with manufacturing and design environments. 

• Excellent oral and written communications skills. 

• Ability to work with little or no supervision. 
• Willingness to learn new skills and stay up to date on the latest technologies. 
• Familiarity with conflict mineral reporting and other compliance/EHS related tasks 
• Strong interpersonal skills 

• Very organized and high attention to detail. 

• Able to work under high pressure and deliver results. 

• Located or willing to relocate to Scottsdale, AZ. 

• Ability to influence, create win/win situations, and produce results. 
• Previous design experience, schematic capture and layout. 

Benefits that Benefit You 

• Competitive salary and 401k with employer match 

• Discretionary paid time off 

• Paid parental leave for all 

• Medical, Dental, Vision plans 

• Fitness Programs 

• Emotional & Mental Wellness support 

• Learning & Development programs 

• And yes, we have snacks in our offices 

Benefits listed herein may vary depending on the nature of your employment and the location where you work 

Your Impact

As a key member of our Validation team, you’ll help ensure every product and system meets the highest standards before it reaches our customers. You’ll develop Validation Test Procedures (VTPs), create comprehensive test plans, and collaborate with R&D and other teams to execute testing from start to finish. Your technical expertise will guide product evaluations, uncover issues, and drive resolutions alongside cross-functional partners. In this role, you’ll work closely with Engineering, Manufacturing, Quality Assurance, Project Management, and Supply Chain—making your communication skills just as important as your technical know-how.

What You’ll Do
Location: Onsite at our Deer Valley, Arizona location
Reports to: Manager, Hardware Validation & Reliability Engineering
Direct Reports: none

• Develop comprehensive test plans for our products
• Incorporate Statistical Analysis into Validation Testing
• Review & provide input into System & Product Requirements.
• Test Axon product capabilities & features to confirm requirements are met and ensure a smooth customer experience.
• Understanding troubleshooting firmware/software or hardware issue at a system level.
• Participate in occasional field testing of Axon products
• Work with a team of skilled technicians to ensure timely execution of the test plans
• Provide status updates and recommendations based on data results, and lead final reporting of validation efforts
• Leverage Engineering background to improve tests and processes
• Design and hone Validation Test Procedures with an emphasis on repeatability, standardization, and accuracy of testing
• Lead and oversee execution of all validation tests – including Firmware/Software, Mechanical, Environmental, and Electrical
• Document, track, and report test status and results to Engineering teams, following Good Documentation Practices (GDP).
• Support Failure Analysis (FA) and Root Cause Analysis (RCA) on issues found in test
• Work with external labs to coordinate required testing
• Implement and maintain 5S Standard for lab organization and management
• Develop customer usage models of all products

What You Bring

• MS or BS Degree in Engineering, Mechanical, Electrical, Electromechanical, Reliability or equivalent.
• Minimum of (5 years) of experience with validation or qualification testing
• Mechanical and Environmental test experience
• Test standards experience (MIL-STD, ISO, IEC, etc.)
• Test automation and basic code scripting, experience.
• Willingness to drive department improvement efforts
• Good attention to detail and documentation
• Experience in a regulated environment, a plus
• Experience with identifying, reproducing, documenting, and reporting bugs or issues
• Experience presenting test plan and requirements to stakeholders
• Understanding of Product Development Life Cycle
• Familiar with Project Management skill set, certified PMP a plus
• Familiar with Bug and Test Tracking Suites such as JIRA a plus
• Experience with manufacturing and assembly process
• Excellent analytical and problem-solving skills
• Excellent skills in MS Office products
• Ability to influence multi-functional organizations
• Certification in Six Sigma Black Belt or Green Belt ,a plus

Benefits that Benefit You

•Competitive salary and 401k with employer match
•Discretionary paid time off
•Paid parental leave for all
•Medical, Dental, Vision plans
•Fitness Programs
•Emotional & Mental Wellness support
•Learning & Development programs
•And yes, we have snacks in our offices

Benefits listed herein may vary depending on the nature of your employment and the location
where you work

Your Impact 

As a Senior Software Engineer on Axon’s Robotics team, you’ll be at the forefront of transforming how law enforcement and military agencies deploy advanced robotic systems. You will work with a talented, fast-paced team focused on building the Android-based software application that will run on Axon’s Ground Control Station (GCS) used by operators to interact with advanced ground and air robots. You will work to solve challenging problems and provide simple and elegant solutions to complex customer needs that will have a direct impact on saving lives. You’ll architect and lead critical software features for advanced robotic command and control, AI, video livestreaming, and data management.

Here, you’ll collaborate with a variety of engineers, product visionaries, and designers to push the boundaries of mobile robotics software and deliver a best-on-class solution to customers. This is your chance to work on something that combines technical complexity with meaningful impact. If you're driven by solving intricate technical problems, passionate about Android development, and ready to play a crucial role in shaping a product that redefines public safety, we want you on our team. Help us build a platform that truly makes a difference in protecting life, truth, and justice.

What You’ll Do

Location: Scottsdale, AZ
Reports To: Engineering Manager

• Lead engineering architecture and design reviews to ensure high standards in software quality.
• Collaborate with the Axon product design team to turn mobile UI designs into functional, engaging solutions.
• Drive the entire mobile software lifecycle, from prototyping to commercialization and post-launch support.
• Interface with cloud services for seamless integration across platforms.
• Set a high technical standard for the team through code and design reviews.
• Mentor engineers, fostering growth and technical skill development within the team.
• Partner with Product, Design, and Engineering teams to deliver integrated solutions that meet customer needs.
• Enhance engineering processes, including sprint planning, stand-ups, and long-term planning.
• Build robust and reliable mission critical software that meets high standards for stability in mission-critical applications.
• Collaborate closely with other groups to align on goals, ensuring we deliver impactful and innovative solutions.

What You Bring

• 6+ years of industry experience shipping Android applications to the Google Play Store.
• Understand the ins and out of mobile phones; expected to lead mobile design reviews as well as the implementation of their designs to release and post-release monitoring
• Experience with modern architecture (MVVM, MVI, etc) including unit testing
• Android experience with Retrofit, Coroutines, Okhttp, Hilt, Jetpack Compose
• Experience working with remote data via REST and JSON
• Understanding and experience with networking protocols such as TCP, UDP, DHCP, DNS, Server-Sent-Events, Websockets (debugging with Wireshark or Charles a plus)

Benefits that Benefit You

• Competitive salary and 401k with employer match
• Discretionary time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Development Programs
• And yes, we have snacks in our offices

This role is based out of our Scottsdale office and follows a hybrid schedule. We rely on in-person collaboration and ask that team members work onsite Tuesdays through Fridays, with the flexibility to work remotely on Mondays, unless there is an approved workplace accommodation. We believe that connection fuels innovation, and our in-office culture is designed to foster meaningful teamwork, mentorship, and shared success.

As a Senior Engineer, Global Product Management at ASM, you’ll experience a dynamic and diverse scope of responsibilities that go beyond what’s typically offered at larger organizations. This role is ideal for someone who thrives in a fast-paced, intellectually stimulating environment and values autonomy, innovation, and cross-functional collaboration. 

You’ll be empowered to think creatively and strategically, working closely with global customers and internal teams to deliver cutting-edge solutions. Every day brings new challenges and opportunities to make a meaningful impact across the product lifecycle—from concept to commercialization. 

Key Responsibilities:  

• Product Lifecycle Management: Lead products from initial concept through high-volume manufacturing to end-of-life, ensuring alignment with market needs and business goals. 
• Roadmap Development: Own and maintain product roadmaps across a portfolio, updating regularly through customer insights and internal collaboration. 
• Product Definition: Own and maintain product structure, configuration, and options to support customer requests and efficient manufacturing execution.
• Customer Engagement: Drive technical discussions, create impactful presentations, and conduct detailed market and competitive analyses to support customer interactions.
• Market Requirements Specification (MRS): Develop and manage MRS documents to guide product development priorities and ensure alignment with customer expectations.
• Strategic Marketing: Craft go-to-market strategies, support executive R&D investment decisions, and develop high-level product strategy presentations.
• Financial Analysis: Collaborate with finance to assess product viability using NPV and IRR models; maintain cost-of-ownership frameworks.
• Business Planning & Market Analysis: Contribute to operational planning, business forecasting, and budget development through market intelligence and competitive analysis.
• New Product Introduction (NPI): Conduct market inflection analysis, develop business cases, align internal stakeholders, and position products for successful launch.
• Technical Collaboration: Partner with development teams to define specifications, manage demo requests, and prioritize product development efforts.
• Supplier Engagement: Build strategic supplier relationships to enable key capabilities for new products.
• Product Promotion: Create promotional content for conferences and product launches; deliver training and support to sales teams and customers. 

Requirements: 

• 3–10 years of experience in technical marketing within the semiconductor, capital equipment, or related industries 

• Advanced degree (Master’s or PhD) in Material Science, Electrical, Chemical, or Mechanical Engineering (or equivalent) 

• Strong background in semiconductor processes, hardware, or device technologies 

• Experience with ALD, CVD, Epi, or vacuum systems is a plus 

• Deep understanding of capital equipment systems and their applications 

• Proven track record of direct customer engagement and supplier management 

• Ability to collaborate across disciplines and manage a diverse product portfolio 

• Solid grasp of product lifecycle and technical marketing principles 

• Willingness and ability to travel globally 

Job Description

The Embedded Software Engineer is responsible for developing and maintaining firmware for SmartRent devices, including Z-Wave controllers (hubs) and access control systems. This role supports the integration of hardware devices with SmartRent platform services, enabling reliable communication between field devices and cloud-based systems.

This role contributes to firmware development using the Nerves framework and Elixir-based systems and collaborates with hardware, platform, and application teams to implement new functionality, support device reliability, and maintain existing device software.

Responsibilities

• Lead medium- to large-scale development efforts across the embedded stack, from firmware through device interfaces, operating with a high degree of autonomy while collaborating with cross-functional teams.
• Design, develop, and maintain firmware for SmartRent IoT devices using Elixir and the Nerves framework.
• Lead the bring-up of new hardware platforms, including driver development, peripheral integration, and system validation.
• Develop and maintain device-local user interfaces running on embedded hardware using technologies such as Phoenix, Flutter, and gRPC.
• Integrate third-party systems, including HVAC, access control, and Z-Wave platforms, by interpreting vendor documentation and supporting required communication protocols.
• Develop and maintain automated tests and supporting documentation to ensure system reliability and prevent regressions across deployed devices.
• Develop project timelines, manage deliverables against defined milestones, and communicate risks, dependencies, and requirement changes proactively.
• Support team development through code reviews, technical guidance, knowledge sharing, and mentorship of less experienced engineers.
• Contribute to internal tooling, shared engineering resources, and open-source initiatives aligned with SmartRent’s technical ecosystem.

Required Qualifications

• Minimum of 4 years of hands-on software development experience.
• Proficiency in Elixir or Erlang/OTP, with working knowledge of the BEAM runtime, or demonstrated ability to learn and apply functional programming concepts.
• Experience with, or demonstrated interest in, embedded Linux systems development.
• Working knowledge of Linux internals, including device trees, kernel configuration, system boot processes, and shell tooling.
• Demonstrated ability to deliver projects from design through deployment with minimal supervision.
• Strong written and verbal communication skills, with the ability to collaborate effectively across teams.
• Demonstrated ability to learn and apply new tools, languages, and technologies as required.
• Must be authorized to work in the United States without the need for employer sponsorship now or in the future.

Preferred Qualifications

• Experience with the Nerves framework or embedded Elixir development.
• Experience with Phoenix, LiveView, or other Elixir-based web frameworks.
• Working knowledge of C/C++ for hardware-adjacent development or driver support.
• Familiarity with IoT communication protocols, such as MQTT, Z-Wave, or BLE.
• Exposure to HVAC or building automation systems.
• Experience integrating access control systems or similar hardware-based platforms.
• Ability to read and interpret hardware datasheets and schematics at a foundational level.
• Experience contributing to open-source projects or shared technical libraries.
• Familiarity with Amazon Web Services (AWS), particularly in IoT-related environments.

#LI-Remote

Sr SWE -AI

Senior Software Engineer, AI Platform (Corporate AI Team)

Team & Role Overview

Axon’s Corporate AI Team sits within the Enterprise Data organization and focuses on internal-facing AI solutions that help Axon employees do more high‑value work with less manual effort. The team builds and operates Cortex, Axon’s internal AI platform that provides GPT‑class models, chat assistants, and secure integrations with systems like Quip, Jira, Slack, Microsoft 365, Snowflake, and more.
We’re looking for a Senior Software Engineer, AI Platform to help design, build, and scale this platform. In this role, you’ll:

• Own core services and integrations that power AI experiences for thousands of Axon employees.
• Collaborate with Corporate AI, Data Engineering, and business teams to turn real workflows into secure, reliable AI‑powered tools.
• Help define best practices and patterns for building production‑grade LLM and agentic workloads at Axon.

This is a hands‑on senior IC role—you’ll spend most of your time designing, coding, and operating production systems, not managing people.

What You’ll Do

Build and Evolve the AI Platform

• Design, build, and operate services that power Axon’s internal AI platform (Cortex), including chat experiences, agents, and integrations with enterprise systems.
• Implement and standardize patterns for deploying AI‑driven applications (APIs, web services, workflows, agents) across Axon’s cloud environments.
• Own and extend connectors and MCP integrations (e.g., Jira, Quip, Slack, M365, Snowflake) that allow LLMs to safely read and write data in Axon systems.
• Measure and improve reliability, latency, and cost for AI workloads, using telemetry and feedback from real users.

Deployment, Integration, and Reliability

• Drive the end‑to‑end lifecycle of new AI features—from prototype to hardened production service (design, implementation, testing, rollout, and operations).
• Evaluate new AI services (e.g., OpenAI, AWS Bedrock, Azure ML) for fit, performance, and cost; recommend and implement the right options for each use case.
• Implement monitoring, alerting, and auditing for AI services, ensuring we can trace usage, detect anomalies, and keep systems healthy in production.

Enablement, Best Practices, and Architecture

• Help define and document best practices for GPT/LLM solution development, including prompt engineering, RAG patterns, agentic workflows, and safe tool use.
• Partner with Corporate AI and Enterprise Architects to shape reference architectures for AI‑enabled apps and workflows (scalability, resiliency, observability, data access).
• Contribute to internal starter kits, training content, and templates that help other engineers and analysts build on the platform effectively.

Security, Governance, and Responsible AI

• Implement and maintain secure patterns for API key management, secrets, and access to models and data sources, aligned with Axon’s security and compliance standards.
• Work with Data, Security, and Governance partners to operationalize responsible AI guardrails—e.g., model selection, data minimization, logging, and usage controls.
• Ensure that new capabilities respect permissions, auditing, and policy requirements across systems like Jira, Quip, Slack, M365, and Snowflake.

Collaboration and Communication

• Collaborate closely with Data Engineering, Solution Architecture, and business teams (Finance, Sales, Operations, etc.) to turn real workflows into repeatable AI solutions.
• Clearly communicate design decisions, trade‑offs, and status to technical and non‑technical stakeholders.
• Participate in brainstorming and discovery sessions to identify “big dumb problems worth solving” with AI and automation.

What You Bring

• Bachelor’s degree in Computer Science, Engineering, or a related field, or equivalent practical experience.
• 4+ years of professional software engineering experience, including building and operating production services or platforms.
• Strong proficiency in at least one of: Python, TypeScript/JavaScript, or Java.
• Experience with at least one major cloud provider (AWS, Azure, or GCP) and comfort working with cloud‑native services (functions, containers, managed databases, queues, storage).
• Solid understanding of web service fundamentals (APIs, authentication/authorization, observability, CI/CD) and how to build reliable, maintainable systems.
• Demonstrated interest in AI/ML and LLMs—for example, integrating with OpenAI, Bedrock, or similar APIs; building GPT‑style apps; or using AI‑assisted development tools.
• Basic understanding of security best practices (secrets management, least‑privilege access, audit logging) and eagerness to deepen this in the context of AI platforms.
• Strong communication and collaboration skills, with comfort working in a fast‑moving, experimental environment.

Preferred Experience

You don’t need all of these, but experience in several of the following will help you ramp quickly:

• Hands‑on work with LLM platforms and tools, such as OpenAI (ChatGPT / APIs), AWS Bedrock, Azure OpenAI, or Azure ML Studio.
• Experience integrating with enterprise systems like Jira, Confluence/Quip, Slack, M365, Salesforce, or Snowflake—especially via APIs or connectors.
• Familiarity with RAG (Retrieval‑Augmented Generation), semantic search, or vector stores in production contexts.
• Exposure to DevOps / platform engineering: Terraform or similar IaC, GitHub Actions or other CI/CD systems, containerization (Docker, Kubernetes), and application monitoring stacks.
• Experience building internal platforms or self‑service tools used by multiple teams.
• Participation in enablement activities (internal trainings, office hours, documentation, or community programs like Axon’s Champions Circle) is a plus.