** This position is not eligible for visa sponsorship for external candidates. Candidates cannot require sponsorship now or in the future**

Job’s mission

Our Global Sales, Services & Spares IQ and Sustaining teams are seeking Snr Engineers I & II, Field Service (level will depend on experience, degree and responsibilities. Please review below) to join ASM at a customer site (TSMC) in North Valley, AZ. Domestic and International travel of at least 75% will be required for this role. As a Senior Field Service Engineer at ASM, you’ll play a critical role in supporting the advanced semiconductor equipment that powers the world’s most transformative technologies. You’ll take the lead on complex troubleshooting, guide and mentor engineers, and strengthen our partnerships by helping customers achieve stable, high‑performance fabrication environments. Your expertise will make a direct impact on tool reliability, customer satisfaction, and the next generation of ASM technology.

What you will be working on

Senior Engineer I, Field Service

• Install, maintain, and repair ASM semiconductor equipment with minimal supervision
  • Lead troubleshooting of complex tool or process issues using structured diagnostic methods
  • Perform root‑cause analysis and recommend targeted, data‑driven corrective actions
  • Review tool‑performance data to identify trends, risks, or improvement opportunities
  • Provide technical guidance and on‑the‑job coaching to less‑experienced engineers
  • Document service activities and support updates to procedures and best practices
  • Communicate solutions, progress, and expectations clearly with customer engineers
  • Participate in escalations alongside cross‑functional ASM engineering teams

Senior Engineer II, Field Service

• Serve as the senior technical lead for equipment installation, performance optimization, and recovery
• Diagnose and resolve highly complex, multi‑factor tool and process issues with limited guidance
• Lead advanced root‑cause analysis and drive long‑term corrective‑action plans that influence global engineering improvements
•  Own the customer‑technical relationship: build trust, anticipate operational needs, and act as ASM’s senior technical representative onsite
• Manage escalations end‑to‑end, aligning expectations, coordinating cross‑functional teams, and communicating clear action plans
• Guide, mentor, and develop engineers through hands‑on instruction, structured training, and knowledge‑sharing
• Champion best practices and contribute to procedure development, improvements, and field‑wide learning
•  Provide detailed field insights to R&D, product, and design teams, including support for beta tools or early‑option deployments

What we are looking for

Senior Engineer I, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 6+ years of experience, OR a Master’s degree with 4+ years of experience OR PhD degree with 0+ years of experience.
• Experience of semiconductor field service or capital‑equipment experience
• Ability to interpret electronic and electromechanical schematics
•  Experience with structured troubleshooting methodologies
• Knowledge of cleanroom and semiconductor safety protocols
• Strong written and verbal communication skills
• Ability to work independently and collaboratively in fast‑paced fab environments
• Willingness to travel domestically and internationally as needed for the role. 
• Proficiency in MS Office

Senior Engineer II, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 8+ years of experience, OR a Master’s degree with 6+ years of experience OR PhD degree with 4+ years of experience.
• Experience in semiconductor field service experience with demonstrated technical leadership
• Advanced knowledge of tool architecture, control algorithms, and multi‑factor troubleshooting
• Experience driving structured root‑cause analysis and long‑term corrective‑action plans
• Proven ability to lead escalations and manage customer‑technical relationships
• Strong communication and mentorship capabilities
• Ability to work autonomously while guiding and developing other engineers
• Willingness to travel domestically and internationally as needed for the role
• Proficiency in MS Office

What sets you apart

Senior Engineer I, Field Service

• Experience supporting beta tools or early‑option equipment
• Knowledge of wafer‑fab operations, robotics, vacuum systems, plasma, RF, or gas handling
• Experience writing or updating procedures or technical documentation
• Strong customer‑service approach and organizational skills
• Familiarity with structured problem‑solving methods

Senior Engineer II, Field Service

• Demonstrated leadership in complex troubleshooting programs or technical initiatives
• Experience owning customer‑technical relationships, including expectations and long‑term partnership building
• Strong capability in mentoring and developing field engineers
• Hands‑on expertise with fab robotics, vacuum systems, plasma, RF, or gas‑delivery systems
• Experience providing structured feedback to engineering or product teams
• Experience evaluating or supporting beta‑stage or early‑option tools

** This position is not eligible for visa sponsorship for external candidates. Candidates cannot require sponsorship now or in the future**

As a Field Service Engineer – Early Career, you’ll take on a hands-on role supporting ASM’s advanced semiconductor equipment and helping our customers keep their fabs running at peak performance. You’ll build real-world expertise through structured training, mentorship, and on-the-job learning while working directly with technologies that power AI, 5G, cloud computing, and next‑generation devices. This is your chance to apply your engineering background, strengthen your technical capabilities, and join a team that’s shaping the future of semiconductor innovation.

In this role, based in North-Valley/Phoenix, AZ at our customer site, you’ll launch your engineering career at the center of cutting‑edge semiconductor manufacturing. It’s an ideal opportunity for early‑career engineers who want to put their education into practice in a high‑tech environment where every day brings something new to learn.

From your first day, you’ll receive training through hands‑on guidance from seasoned engineers onsite. You’ll work with vacuum systems, plasma, chemical delivery, robotics, sensors, advanced metrology, and complex hardware‑software interactions. Your contributions will have a direct impact on tool performance, system uptime, and customer success—playing a meaningful role in enabling leading‑edge logic technology nodes. This experience lays a strong foundation for rapid growth, technical mastery, and a variety of long‑term career paths within ASM.

Shifts available:

Mon-Fri- 8am-5pm (subjected to OT)

What You Will Be Working On 

• Support installation, maintenance, and repair of ASM semiconductor equipment at customer sites 
• Troubleshoot equipment and process issues with guidance from senior engineers 
• Deliver clear, timely, customer‑focused support with a strong safety mindset 
• Working in cleanroom environments while following strict safety and quality standards.
• Assist in identifying and contributing to continuous improvement efforts  
• Participate in customer escalations alongside experienced team members 

What We Are Looking For 

• Bachelor’s or master’s degree in Electromechanical Engineering, Electrical Engineering, Mechanical Engineering, or related field 
• Candidates who are hands-on and mechanically curious, energized by complex systems and real-world problem solving, Comfortable working in fast paced, hightech environments & motivated to build a long-term engineering career. 
• Internship, co‑op, senior design project, lab research, or hands‑on technical experience 
• Ability to read and interpret basic electronic and electromechanical schematics 
• Understanding of safety protocols and willingness to work in cleanroom environments 
• Strong problem‑solving mindset and eagerness to learn 
• Clear communication skills and a strong customer-service mindset 
• Ability to work independently and collaboratively 
• Willingness to travel domestically and internationally 
• Proficiency with Microsoft Office 

What Sets You Apart 

• Demonstrated commitment to safety, quality, and disciplined execution 
• Exposure to semiconductor processes, wafer fabs, robotics, vacuum systems, plasma, or gas handling 
• Experience writing technical documentation in school or project settings 
• Familiarity with customer‑facing or support roles (internships, tutoring, help desk, teamwork) 
• Interest in structured problem‑solving methods, statistical methods, data analysis. 
• Curiosity and learning orientation when working with advanced semiconductor technologies 
• Participation in engineering clubs, competitions, or technical student groups 

Why join ASM? 

2026 is the year to join ASM as a Field Service Engineer. Apply now! 

Job's Mission:

As a Software Quality Assurance Engineer at ASM, you will ensure the reliability and effectiveness of our software that drives cutting-edge semiconductor processing equipment. You’ll work on testing and qualifying software, streamlining QA processes to align with CI/CD development, and collaborating with talented global teams. Your contributions will directly impact the functionality and performance of advanced hardware in the semiconductor industry.

What you will be working on:

• Design, develop, test, deploy, maintain, document, and improve software test suites.
• Perform both manual and automated testing in simulation environments and on physical semiconductor manufacturing equipment.
• Execute and analyze the functionality of engineering designs compared to intended outcomes, providing valuable feedback.
• Automate, streamline, and maintain QA processes to integrate seamlessly with CI/CD development workflows.
• Develop and implement quality standards, methods, and procedures to enhance existing business processes.
• Work closely with Process Engineering teams to test systems, validate engineering designs, and identify quality improvements.
• Create and manage tests plans and test cases, ensuring thorough validation of software enhancements and defect fixes.
• Gain an understanding of ASM system operations, including mechanical, electrical, and software functionality.
• Document testing procedures and feedback to ensure quality and consistency across projects.

What we are looking for:

• Bachelor’s + 5 years of experience, Master's +3 years OR PhD + 2 years of experience. Degree in Computer Science, Computer Engineering, or a related field.
• Proficiency in programming languages such as Python, C++, or C#.
• Experience with system quality assurance or engineering for complex electromechanical equipment with integrated software controls.
• Strong written and verbal communication skills for interacting with senior leadership and stakeholders.
• Willingness to travel up to 10% of the time.

What sets you apart

• Familiarity with tools like Jira, Confluence, Git, Test Complete, or TestRail.
• Experience in software configuration management or versioning in a software development environment.
• Knowledge of DevOps and CI/CD pipeline setup.

Senior Engineer I, Software Engineering

As part of ASM’s Software Engineering team, you’ll develop advanced control software that drives the most sophisticated semiconductor equipment in the world. Your work will directly impact robotics, gas flow systems, and temperature control hardware—delivering real-time results in chip manufacturing. Based in Phoenix, you’ll collaborate globally and help shape the future of semiconductor automation and factory integration.

Responsibilities:

• Design, develop, test, deploy, and maintain software for semiconductor manufacturing equipment
• Build software for Windows and real-time operating systems
• Troubleshoot and resolve issues in real-time control systems
• Triage mechanical, electrical, and software bugs
• Lead escalation calls with field engineers and global customers
• Collaborate with QA and Support teams to manage regression testing
• Author and review system specifications, software designs, and test plans
• Investigate internal and external problem reports and propose solutions
• Evaluate and recommend software engineering tools
• Participate in system design and scheduling efforts
• Integrate and support factory automation protocols such as SECS/GEM
• Work closely with automation teams to ensure seamless equipment-factory communication

Requirements:

• BS Degree in Computer Science or related field. MS preferred.
• Strong software development skills in C#
• 5+ years’ experience as a generalist or mid-stack software developer
• Experience in the semiconductor industry
• Hands-on experience with factory automation systems
• Familiarity with SECS/GEM, GEM300, EDA/Interface A protocols
• Experience with AMHS (Automated Material Handling Systems)

What sets you apart

• 10+ years in software development and architecture
• Experience with:
  • Machine control software (especially for semiconductor equipment)
  • Windows and real-time operating systems
  • Multi-threaded and real-time applications
  • GUI development and device drivers
  • Networking, data communications, and EtherCAT
  • Dynamic scheduling algorithms with deadlock avoidance

Senior Engineer I, Software Engineering - Factory Automation 

As part of ASM’s Software Engineering team, you’ll develop advanced control software that drives the most sophisticated semiconductor equipment in the world. Your work will directly impact robotics, gas flow systems, and temperature control hardware—delivering real-time results in chip manufacturing. Based in Phoenix, you’ll collaborate globally and help shape the future of semiconductor automation and factory integration.

Responsibilities:

• Design, develop, test, deploy, and maintain software for semiconductor manufacturing equipment
• Build software for Windows and real-time operating systems
• Troubleshoot and resolve issues in real-time control systems
• Triage mechanical, electrical, and software bugs
• Lead escalation calls with field engineers and global customers
• Collaborate with QA and Support teams to manage regression testing
• Author and review system specifications, software designs, and test plans
• Investigate internal and external problem reports and propose solutions
• Evaluate and recommend software engineering tools
• Participate in system design and scheduling efforts
• Integrate and support factory automation protocols such as SECS/GEM
• Work closely with automation teams to ensure seamless equipment-factory communication

Requirements:

• BS Degree in Computer Science or related field. MS preferred.
• Strong software development skills in C#
• 5+ years’ experience as a generalist or mid-stack software developer
• Experience in the semiconductor industry
• Hands-on experience with factory automation systems
• Familiarity with SECS/GEM, GEM300, EDA/Interface A protocols
• Experience with AMHS (Automated Material Handling Systems)

What sets you apart

• 10+ years in software development and architecture
• Experience with:
  • Machine control software (especially for semiconductor equipment)
  • Windows and real-time operating systems
  • Multi-threaded and real-time applications
  • GUI development and device drivers
  • Networking, data communications, and EtherCAT
  • Dynamic scheduling algorithms with deadlock avoidance

Engineer, Software Support

At ASM, our Software Engineering teams works on delivering software that has immediate, tangible results visible in the operation of semiconductor processing equipment hardware. The hardware includes robotics, gas valves, temperature controllers and other hardware.  

As a Software Support Engineer, you will make an impact by investigating, recreating, and troubleshooting software issues to resolution as reported by our customers. 

Responsibilities:

• Gather information to investigate the issue, reproduce it, determine the root cause, and recommend corrective actions. 
• Troubleshoot and resolve software issues, including embedded software for control systems.  Able to triage mechanical, electrical, and software bugs. 
• Responsible for managing escalation calls with field support engineers 
• Create bug reports for the developer to use when fixing the bug. 
• Work with QA to add replicated bugs to the regression. 
• Travel to customer sites to support installations, training, and troubleshooting of ASM products. 
• Talking to the account team and GPS group (not directly with the customer) when investigating reported issues. 
• The team will handle all issues until they are ready to send to the developer.  

Minimum Qualifications 

• BS+ 4 years experience or MS+ in Computer Science, Computer Engineering, or a related field. 
• Ability to read code and diagnose issues.  
• Software development or test (QA) experience. 
• Ability to travel 10-25% domestic and international.

Preferred Qualifications 

• Preferred expertise in C/C++, C#, Python, Gitlab/Github.
• Experience with semiconductor equipment preferred 
• Experience working with two or more of the following is preferred: software for machine control, Semiconductor Factory Automation, Multi-threaded applications, real-time software, device drivers, or other interrupt-driven software 

Senior Engineer, Software Support

At ASM, our Software Engineering teams works on delivering software that has immediate, tangible results visible in the operation of semiconductor processing equipment hardware. The hardware includes robotics, gas valves, temperature controllers and other hardware.  

As a Senior Software Support Engineer, you will make an impact by investigating, recreating, and troubleshooting software issues to resolution as reported by our customers. 

Responsibilities:

• Gather information to investigate the issue, reproduce it, determine the root cause, and recommend corrective actions. 
• Troubleshoot and resolve software issues, including embedded software for control systems.  Able to triage mechanical, electrical, and software bugs. 
• Responsible for managing escalation calls with field support engineers 
• Create bug reports for the developer to use when fixing the bug. 
• Work with QA to add replicated bugs to the regression. 
• Travel to customer sites to support installations, training, and troubleshooting of ASM products. 
• Talking to the account team and GPS group (not directly with the customer) when investigating reported issues. 
• The team will handle all issues until they are ready to send to the developer.  

Minimum Qualifications 

• BS+ 8 years or MS+ 4 years in Computer Science, Computer Engineering, or a related field. 
• Ability to read code and diagnose issues.  
• Software development or test (QA) experience. 
• Ability to travel 10-25% domestic and international.

Preferred Qualifications 

• Preferred expertise in C/C++, C#, Python, Gitlab/Github.
• Experience with semiconductor equipment preferred 
• Experience working with two or more of the following is preferred: software for machine control, Semiconductor Factory Automation, Multi-threaded applications, real-time software, device drivers, or other interrupt-driven software 

The Maneuver Dominance team at Anduril develops operationally relevant, multi-asset autonomy. We are focused on building the next generation of autonomous capabilities by leveraging existing Anduril platforms like Ghost or Altius, bringing 3rd party platforms into Anduril's Lattice ecosystem, and developing breakthrough systems that will shape the future of the battlefield. If you are interested in working in an extremely innovative and fast paced environment, where your work directly makes an impact and difference in the products that are fielded this a fantastic opportunity.

As an Aviation Maintenance Engineer you will ensure the airworthiness and mission readiness of developmental UAS platforms across assembly, maintenance, and flight test operations. You will work alongside a team of engineers, test pilots, and test specialists, contributing hands-on mechanical expertise to aircraft assessment, maintenance coordination, and reporting on all facets of aircraft readiness. This role is central to enabling safe and efficient developmental flight test under both civil and military approval frameworks.

What You'll Do

• Assist with many aspects of aircraft assembly, planned and preventative maintenance, and operation including mechanical integration (flight control surfaces, propulsion), composites fabrication, and avionics build/integration/test.
• Troubleshoot, repair, and maintain aircraft and subsystems including landing gear, fuel system, flight control, and propulsion.
• Perform common airframe construction techniques.
• Complete aircraft and equipment documentation.
• Troubleshoot, repair, and maintain site support equipment.
• Communicate mechanical assessment with engineering and production.
• Perform validation and testing of various electronic components using equipment such as multimeters, oscilloscopes, network analyzers, and test racks.
• Perform proper FOD and tool control practices.

Required Qualifications

• 5+ years rotorcraft experience.
• Valid FAA Airframe & Powerplant (A&P) license.
• Excellent communication and teamwork abilities.
• Proficient with computer use (standard browser, word processing applications).
• Willing to be multi-capable, including some electronics troubleshooting and repair.
• Strong problem-solving skills and attention to detail.
• Ability to rapidly change roles/responsibilities while working in a fast paced, challenging work environment.
• Willing to travel international and domestic on an as needed basis.

Preferred Qualifications

• US security clearance eligible.
• Experience with both electric and turbine power plants.

About the Role

The Ground System Deployments team is looking for an innovative, collaborative and self-driven Civil Project Engineer to join the team to ensure the successful deployment of Zipline’s Ground Systems in all possible applications and configurations. 

This role is well suited to seasoned civil engineers looking to apply their experience designing novel and innovative sites, foundations and structures to advance and accelerate the new and growing industry of  autonomous drone delivery ground systems. 

With broad scope to influence the design of current and next generation systems this role will jopin a stellar team responsible for the site level designs, layouts, civil designs, structural and foundation designs and implementation. Interacting with various mechanical, structural and electrical engineering stakeholders across the organization this role will  ensure the overall system and its site design work hand in hand to ensure the successful deployment of Ziplines Ground Systems within cost and timeline goals. 

This role has a mandate to drive positive change through the organization - as problems or scenarios occur this individual will be tasked with both 0 to 1 problem/project responsibility and also working with the broad engineering and deployments organization to implement foundation changes to product and process as needed. 

This position can be based out of our San Francisco, Dallas or Houston Offices. Onsite is preferred, but this role can be remote flexible with up to 50% travel for the right candidate.

WHAT YOU’LL DO

• Act as the Civil Engineer of Record for Zipline projects in Texas and other jurisdictions
• Create, refine and update civil layouts for the sites. Act as the Zipline representative for any technical clarifications from cities or jurisdictions regarding our designs. 
• Contribute to the civil and site design standards of Zipline sites. 
• Contribute to the pavement, drainage, and sitescape designs and approaches of Zipline sites and structures. 
• Advise on permitting, codes and and other certification efforts relevant to the projects and structures.  
• Engage and interact with cities and relevant inspectors or relevant external parties to ensure timely project approvals and deployment. 
• Ensure relevant and applicable civil strategies are investigated and implemented where appropriate - grading designs, curb designs, pavement designs
• Understand our internal and external customer’s business and needs and work with our internal engineering and business teams to refine and roadmap necessary changes to ensure the successful deployment of the Ground Systems infrastructure. 
• Source and develop relationships with outside organizations (local jurisdiction, utilities, contractors, OEM and material suppliers etc).
• Evaluate all options and a lean budget, select best vendors to ensure reliable and quality services and products.
• Understand and mitigate the preconstruction, construction, operational and sustaining  risks associated with each project. 
• Interact directly with internal and external partners and stakeholders as needed. 
• Domestic travel to project sites expected on an ad-hoc basis. 

WHAT YOU’LL BRING

• Civil Professional Engineering qualification with stamping capacity in Texas (or the ability to quickly obtain stamping capacity in Texas). Ability to stamp in Arizona and other sunbelt states a strong preference, or the ability and capacity to quickly gain this qualification. 
• Bachelor's degree or higher  with minimum 6 years of experience.
• The individual should have an Engineering background (Civil, others acceptable with relevant experience and stamping capacity) and have worked in the construction, electrical design/EPC, or renewable energy industry, or equivalent industries for 4+ years. The individual should have experience (4yrs+) in working with:
  • Civil codes and building standards, and applicable design and management software.
  • Technical Product Management, Technical Program Management or applicable areas.
  • Systems engineering and  system architecture.
  • External design teams (Architectural, Structural, Civil,Electrical MEPs) on commercial or industrial development  / construction projects.
  • Experience with automated logistics, UAV aviation, EVSE Charging, Renewable Energy and Battery Energy Storage Systems or equivalent industries a plus. 

• Strong candidates should have excellent communications skills to:
  • Drive internal alignment of requirements for projects based on business needs.
  • Provide leadership team with updates on scope, schedule and budgets. 
  • Drive external parties for the implementation of real estate projects. 
• Must be eligible to work in the US.

What Else You Need To Know

Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws or our own sensibilities.

We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply!

Position Overview

Woolpert is hiring a Program Director for the Mission Critical team. The Program Director must be a licensed Architect or Engineer and is primarily responsible for sales and growth within the Mission Critical practice area through the establishment and improvement of client relationships. This position is also responsible for working across practice areas and service lines to develop business opportunities and ensure services are performed in a manner compatible with the goal of being an industry leader. This position reports to Mission Critical Market Director.  

We are unable to provide visa sponsorship for this position. Applicants must already possess work authorization in the country the job is located.     #LI-SN1

What You Will Do:

Business Development  

• Build and enhance existing client relationships to identify and initiate additional project opportunities within a client base for the service line, practice area and firm. 
• Identify and build new client relationships that match the client and project type focus and overall business strategy of the service line and practice area. 
• Promote SNHA (a Woolpert company) as an industry leader for specified market/practice and service(s) with new and existing clients. 
• Early project feasibility and strategic design input. 
• Collaborate with the MC Market Director and Building Sector Leader to define the EU market sales goals. 

Collaboration and support 

• Mentor and assist project managers in negotiating project schedules, fees, scope and contract terms.  
• Work with Project Managers to identify, address and resolve any project issues impacting client goals, objectives and/or client satisfaction.   
• Define and communicate client needs and expectations. 
• Ensure continuous stakeholder (client, client’s manager, etc.) communications addressing, resolving, and anticipating project issues. 

What You Will Bring:

Qualifications and Experience 

• BA/BS or MA/MS in Architecture, Mechanical Engineering, Civil Engineering, Electrical Engineering or similar field of study required. 
• 15 or more years of related experience in the Mission Critical Datacenter industry
• Current Professional Registration  
• Office 365: Word, Excel, Teams, SharePoint, Outlook, PowerPoint, basic AutoCad and Bluebeam (Essential). 
• Ability to travel within reason to meet the needs and demands of the practice area 

General Aptitude 

• Ability to make sound decisions/recommendations based on the evaluation and synthesis of information and data. 
• Demonstrates an enterprising, innovative, proactive management approach. 
• Possesses high levels of demonstrated leadership ability. 
• Ability to research and define multiple project scopes, schedules, and budgets. 
• Ability to establish and maintain rapport with clients, vendors, management and employees. 
• Possesses strong negotiation and problem-solving skills.  
• Possesses excellent facilitation and/or meeting skills.  
• Possesses excellent presentation and communication (oral and written) skills. 
• Strong understanding of project management and ability to facilitate technical discussions when needed.  
• Strong organizational skills to successfully manage multiple, competing priorities.
• Engaging with good interpersonal skills.

Benefits You Will Love

Certified as a Great Place to Work, Woolpert is one of the fastest-growing architecture, engineering, and geospatial companies in the world. With over 75 offices and countless projects around the globe, you’ll work on meaningful assignments that improve quality of life around the world. In addition to offering competitive pay, we provide employees with a robust set of unique benefits, including:

• Freedom to Work program: Set your own schedule and location (as appropriate).
• Principal program: Earn the opportunity to become an owner of the firm.
• Flexible paid time off/vacation: Take time off when it makes sense for you and your team.
• Career development: Explore a wide range of learning and growth opportunities within and across industries.
• Health, life, vision, and dental insurance: Cover all your medical bases.
• Paid sick time, retirement plan, fitness reimbursement, pet insurance, identity protection, technology stipend, employee assistance program, and more!

Job's mission

What you will be working on

What we are looking for

What sets you apart

Benefits:

• Health insurance (medical, dental, vision)
• 401(k)Retirement plan
• Paid time off (vacation, sick, flex, and holiday) & Parental Leave Benefit
• Life and disability insurance
• Employee assistance program (EAP), Family support, and parental consulting groups
• Healthcare Concierge
• Health Savings and Flexible Spending Accounts
• Lifestyle Spending Account / Fitness Reimbursement
• Fertility & Family Support Programs
• Wellness Program with medical premium discounts

As a Senior Software Engineer at ASM, you’ll sit at the intersection of cutting-edge software, complex hardware, and real-world customer impact. You’ll be a technical leader who solves the toughest software challenges in semiconductor manufacturing—driving system reliability, safety, and performance for our global customers. In this role, you won’t just fix issues—you’ll lead investigations, influence architecture, and deliver long-term, systemic improvements that power advanced semiconductor technology worldwide.

What You’ll Be Working On

• Lead deep technical investigations into software-related safety interlocks, validating corrective and preventive actions.
• Analyze and optimize multiple interacting subsystems, gaining end-to-end understanding of full platform workflows.
• Drive root cause and corrective action (RCCA) using packet captures, log correlation, and system-level analysis.
• Design and evaluate subsystem architectures, including multi-threading and scheduler interactions.
• Develop, test, deploy, maintain, and continuously improve software for advanced semiconductor manufacturing equipment.
• Troubleshoot complex software issues, including real-time control systems.
• Act as a technical escalation point—supporting field engineers and customers globally.
  Partner with QA and Support to reproduce field issues and strengthen regression coverage.
• Author and review system specifications, software designs, and test plans.
• Investigate internal and external technical inquiries, delivering clear analysis and actionable solutions.
• Evaluate and influence software engineering tools and system design decisions.
• Plan and coordinate rapid software fixes and deployments in high-impact environments.
• Present technical insights, progress, and outcomes in customer QBRs, including findings from complex DOE analyses.

What We’re Looking For

• Bachelor’s degree in Computer Science (or related field) with 7+ years of industry experience, or Master’s degree with 4+ years, or PhD with 3+ years of relevant experience
• Strong software development expertise in C++ and/or C#
• Solid understanding of multi-threaded applications
• Experience working with software documentation, specifications, and APIs
• Good knowledge of software memory architecture and debugging

What Sets You Apart

• Advanced degree (Master’s or PhD) and experience in software architecture and machine control systems, ideally within semiconductor equipment
• Hands-on experience with GUIs, device drivers, and interrupt-driven software
• Knowledge of data communications, networking, and EtherCAT
• Understanding of dynamic scheduling algorithms and deadlock avoidance
• Proficiency with development tools such as debuggers, application builders, and configuration management systems
• Ability to triage and diagnose mechanical, electrical, and software issues holistically
• Strong analytical skills, including designing and interpreting complex DOEs using multivariate methods or PCA

As a Principal Engineer, Global Product Management at ASM, you’ll have the opportunities to get involved in a wider scope of work compared to our larger competitors. While the workload is challenging, you are given the independence and autonomy to perform at your peak. This work requires being innovative, so you must have the ability to collaborate with others to deliver creative solutions, work well under pressure and pay great attention to small details.

This position is responsible for product management & technical marketing activities within the Product Management group. Every day is different, working with different customers and different products. This role is for someone who enjoys and is intellectually curious about the whole process and being part of it. You get to work external global customers that have many different needs and you will be part of the solution.  

Key Responsibilities:

• Product Life Cycle – Drive the product life cycle from concept to high volume manufacturing to obsolescence
• Roadmaps – Maintain product roadmap for a portfolio of products, periodically update roadmap through discussions with customers and internal experts, align product priorities and resources to roadmap
• Customer Engagement – Support Technical Meeting with customers, create and manage customer presentations, detailed market and competitive analysis
• MRS – Own the market requirement spec documents and ensure product development priorities align with MRS and customer needs
• Strategic Marketing – Prepare market strategies for executive R&D expenditure requests, develop roadmap and product strategy presentations for executives within ASM
• Financial – Work with finance department on NPV and IRR for products, maintain cost of ownership models
• Business Planning and Market Analysis – Attend company operation/planning meeting, create Business plan/Operation review materials, create business forecast based on market information, support budget planning, competitive analysis
• Drive teams internally to meet set products profit gross margins
• New Product Introductions – Detailed market analysis for inflections, development of business plans, internal executive alignment, positioning of products
• Support technical activities – Work with product development teams on specifications and data collection requirements, manage customer demo requests, prioritization of product development activities
• Supplier Engagement – Develop key capabilities for new products through collaboration with suppliers
• Product Promotion – Create promotional materials for conferences and launches, Sales and product support training, Introductions to Customer

Requirements:

• 10+ years of semiconductor / capital equipment industry experience, of which a significant portion has been in technical marketing and / or product management roles
• Masters or PhD in Material Science, Electrical/Chemical/Mechanical Engineering or equivalent
• Process, hardware, or device experience in semiconductors or capital equipment
• ALD or CVD experience is a plus
• High level of proficiency or deep understanding of capital equipment systems in semiconductor or similar industry
• Direct customer engagement or supplier management
• Ability to work with multiple internal disciplines on portfolio of products
• Understanding of product life cycle and technical marketing
• Ability to travel globally

Overview

Changing the world of luxury electrified mobility needs great people who like to have fun and achieve results as a team. As part of this journey, we are currently seeking a dynamic Program Management professional that can demonstrate an ability to thrive in a fast-paced environment, work independently, and apply the correct level of urgency to advance our vehicle line program deliverables. This person will be based in our Phoenix, AZ location.

• Serve as a key member of the vehicle line program management team, contributing from the conceptual design phase through to the start of production for a new vehicle line.
• Manage the technical product description, including hardware and software features, ensure they are developed on time and meet system design specification, mechanical packaging, unit testing, verification, integration and validation process needs. 
• Identify, assess and mitigate program risks by working with cross functional teams across the company such as engineering, enterprise and operations.
• Lead efforts to align build configurations and vehicle test plans with the cross-functional teams to ensure build volumes meet product development requirements. 
• Execute cross-functional system release plan, including requirements from areas such as product marketing, product management, software integration, infotainment system, ADAS etc. 
• Design and implement effective program management processes and best practices from initiation to completion in partnership with hardware, software and manufacturing teams. 
• Execute solid root-cause analysis with the ability to identify and predict possible deviations related to product architecture or any other required technical changes to meet program goals.
• Proactively evaluate design and engineering decisions with the Program Chief Engineer, ensuring that there are no discrepancies in the correlation with the program's schedule, budget, and scope.
• Ensures on time execution of engineering change requests across various HW and SW teams by working closely with supply chain, engineering and NPI. 
• Expedite revisions, corrections, and implementations of necessary changes to previously published documentation with the cross-functional teams. 
• Manage critical program databases including confluence pages and Kanban boards to ensure information cascade and accuracy. 
• Foster strong cross-dimensional partnerships and effectively prioritize workload demands to meet project deadlines. 

• Solid understanding of automotive systems, HW & SW development cycles and manufacturing processes. 
• A proven track record of product development and on time delivery of complex technical products. 
• Wide experience in automotive hardware development processes, including integration, validation and chance management processes. 
• Experience building, developing, and managing highly effective program management tools and processes. 
• Quickly grasp complex problems and effectively guide the engineering team to decisions while coordinating action plans.
• Solid root-cause analysis sense with the ability to correlate product architecture modifications to technical changes. 

• Bachelors in an Engineering discipline, or equivalent work experience. Master's degree preferred. 
• Proven experience of delivering a program or product through various stages of development cycles
• 5+ years of experience in technical leadership, system engineering and/or technical program management, preferably automotive related 
• 7+ years of professional experience in the automotive industry preferred
• Experience working with tools such as Jira, Jama, Gantt charts, Smartsheet and 3dx.

Our Atomic Layer Deposition (ALD) Chamber Engineering team is seeking innovative and driven and experienced Mechanical Engineers to join their teams. Our ALD and team is at the forefront of developing cutting-edge technologies. As a Mechanical Engineer at ASM, you will contribute to designing, developing, and optimizing high-precision equipment. Collaborating with cross-disciplinary teams, you will play a critical role in solving complex engineering challenges, ensuring product reliability, and driving technological advancements. 

Responsibilities:

• Apply sound engineering principles, product specifications and research data to create designs for systems and products for semiconductor industry.
• Perform engineering calculations including structural, thermal and fluid dynamics problems
• Create and revise Creo Parametric CAD models and detail drawings, ranging in complexity from simple piece parts to large assemblies
• Determine feasibility of product proposals, resolve problems based on technical inputs and develop new designs maintaining product design safety criteria. Apply statistics to optimize and deliver “first time right” designs.
• Prepare product/system designs and related engineering documentation for the manufacturing and testing of prototype and production released products. The documentation shall be complete and easy to follow.
• Project management duties include report generation, schedule creation and maintenance, design reviews and interdepartmental coordination.
• Provide assistance in establishing product configuration and structures on new products and features in both development and manufacturing environments.
• Present and participate in design reviews for unique customer driven specials, product enhancements and other new designs.
• Create, manage and execute engineering project plans, including task scheduling with Gantt charts and resource and cost estimates,
• Travel to customer sites/supplier sites to participate in technical discussions.
• Assist marketing and vendors in preparation of cost estimates dealing with nonstandard options, new system features and product enhancements. 
• Support projects in conjunction with technical staff, managers and manufacturing groups. Support development, installation and testing of hardware to verify performance. Create test plans, verify and approve test procedures. 
• Interface with other organizations on new product updates and ensure a smooth transition of the product into the manufacturing cycle.
• Evaluate change requests and complete all aspects of engineering change orders.

Qualifications:

• Masters in Mechanical Engineering or related degree, PhD strongly preferred. 
• Experience in engineering, design, and development of complex mechanical systems including: reactors, vacuum chambers, gas delivery systems, pneumatics, water cooling circuits, and vacuum systems required.

Skills:

• Semiconductor capital equipment or heavy capital equipment preferred.
• Deposition product knowledge a plus (CVD, ALD, EPI, PVD)
• Knowledgeable in the requirements for CE, NFPA, Semi S2-95 and other relevant standards as applicable to semiconductor manufacturing equipment.
• Understanding of materials: metals, plastics, surface coatings and surface finishes.
• Computer background in Microsoft applications, CREO and AutoCAD.
• Proficiency in ASME Y14.5 and/or ISO 1101:2017 preferred geometric dimension and tolerance
• Has knowledge of best practices and how own area integrates with others; recommends product and process improvements.
• Able to work with a diverse team to achieve requirements and specifications on complex projects.
• Capability to provide and maintain resource coordination and reporting, interfacing with other organizations and outside vendors on resource requirements.
• A critical thinker with proven ability to create effective solutions to complex engineering problems.
• Excellent verbal and written communication; ability to present design concepts to peers and management in a professional and effective manner.
• Ability to work in a team environment with aggressive deadlines and multiple priorities while maintaining a team player attitude.
• Perform self-inspection of all work and is responsible for ensuring that all work performed adheres to documentation requirements, company policies and procedures.

Your Impact

As a key member of our Validation team, you’ll help ensure every product and system meets the highest standards before it reaches our customers. You’ll develop Validation Test Procedures (VTPs), create comprehensive test plans, and collaborate with R&D and other teams to execute testing from start to finish. Your technical expertise will guide product evaluations, uncover issues, and drive resolutions alongside cross-functional partners. In this role, you’ll work closely with Engineering, Manufacturing, Quality Assurance, Project Management, and Supply Chain—making your communication skills just as important as your technical know-how.

What You’ll Do
Location: Onsite at our Deer Valley, Arizona location
Reports to: Manager, Hardware Validation & Reliability Engineering
Direct Reports: none

• Develop comprehensive test plans for our products
• Incorporate Statistical Analysis into Validation Testing
• Review & provide input into System & Product Requirements.
• Test Axon product capabilities & features to confirm requirements are met and ensure a smooth customer experience.
• Understanding troubleshooting firmware/software or hardware issue at a system level.
• Participate in occasional field testing of Axon products
• Work with a team of skilled technicians to ensure timely execution of the test plans
• Provide status updates and recommendations based on data results, and lead final reporting of validation efforts
• Leverage Engineering background to improve tests and processes
• Design and hone Validation Test Procedures with an emphasis on repeatability, standardization, and accuracy of testing
• Lead and oversee execution of all validation tests – including Firmware/Software, Mechanical, Environmental, and Electrical
• Document, track, and report test status and results to Engineering teams, following Good Documentation Practices (GDP).
• Support Failure Analysis (FA) and Root Cause Analysis (RCA) on issues found in test
• Work with external labs to coordinate required testing
• Implement and maintain 5S Standard for lab organization and management
• Develop customer usage models of all products

What You Bring

• MS or BS Degree in Engineering, Mechanical, Electrical, Electromechanical, Reliability or equivalent.
• Minimum of (5 years) of experience with validation or qualification testing
• Mechanical and Environmental test experience
• Test standards experience (MIL-STD, ISO, IEC, etc.)
• Test automation and basic code scripting, experience.
• Willingness to drive department improvement efforts
• Good attention to detail and documentation
• Experience in a regulated environment, a plus
• Experience with identifying, reproducing, documenting, and reporting bugs or issues
• Experience presenting test plan and requirements to stakeholders
• Understanding of Product Development Life Cycle
• Familiar with Project Management skill set, certified PMP a plus
• Familiar with Bug and Test Tracking Suites such as JIRA a plus
• Experience with manufacturing and assembly process
• Excellent analytical and problem-solving skills
• Excellent skills in MS Office products
• Ability to influence multi-functional organizations
• Certification in Six Sigma Black Belt or Green Belt ,a plus

Benefits that Benefit You

•Competitive salary and 401k with employer match
•Discretionary paid time off
•Paid parental leave for all
•Medical, Dental, Vision plans
•Fitness Programs
•Emotional & Mental Wellness support
•Learning & Development programs
•And yes, we have snacks in our offices

Benefits listed herein may vary depending on the nature of your employment and the location
where you work

As a Senior Engineer, Global Product Management at ASM, you’ll experience a dynamic and diverse scope of responsibilities that go beyond what’s typically offered at larger organizations. This role is ideal for someone who thrives in a fast-paced, intellectually stimulating environment and values autonomy, innovation, and cross-functional collaboration. 

You’ll be empowered to think creatively and strategically, working closely with global customers and internal teams to deliver cutting-edge solutions. Every day brings new challenges and opportunities to make a meaningful impact across the product lifecycle—from concept to commercialization. 

Key Responsibilities:  

• Product Lifecycle Management: Lead products from initial concept through high-volume manufacturing to end-of-life, ensuring alignment with market needs and business goals. 
• Roadmap Development: Own and maintain product roadmaps across a portfolio, updating regularly through customer insights and internal collaboration. 
• Product Definition: Own and maintain product structure, configuration, and options to support customer requests and efficient manufacturing execution.
• Customer Engagement: Drive technical discussions, create impactful presentations, and conduct detailed market and competitive analyses to support customer interactions.
• Market Requirements Specification (MRS): Develop and manage MRS documents to guide product development priorities and ensure alignment with customer expectations.
• Strategic Marketing: Craft go-to-market strategies, support executive R&D investment decisions, and develop high-level product strategy presentations.
• Financial Analysis: Collaborate with finance to assess product viability using NPV and IRR models; maintain cost-of-ownership frameworks.
• Business Planning & Market Analysis: Contribute to operational planning, business forecasting, and budget development through market intelligence and competitive analysis.
• New Product Introduction (NPI): Conduct market inflection analysis, develop business cases, align internal stakeholders, and position products for successful launch.
• Technical Collaboration: Partner with development teams to define specifications, manage demo requests, and prioritize product development efforts.
• Supplier Engagement: Build strategic supplier relationships to enable key capabilities for new products.
• Product Promotion: Create promotional content for conferences and product launches; deliver training and support to sales teams and customers. 

Requirements: 

• 3–10 years of experience in technical marketing within the semiconductor, capital equipment, or related industries 

• Advanced degree (Master’s or PhD) in Material Science, Electrical, Chemical, or Mechanical Engineering (or equivalent) 

• Strong background in semiconductor processes, hardware, or device technologies 

• Experience with ALD, CVD, Epi, or vacuum systems is a plus 

• Deep understanding of capital equipment systems and their applications 

• Proven track record of direct customer engagement and supplier management 

• Ability to collaborate across disciplines and manage a diverse product portfolio 

• Solid grasp of product lifecycle and technical marketing principles 

• Willingness and ability to travel globally 

As a Senior Engineer II, Mechanical Engineering at ASM, you will play a pivotal role in design and development of high‑precision ALD chamber and semiconductor equipment systems. In this role, you will apply solid mechanical engineering fundamentals to solve complex design challenges, support new product development, and ensure reliable transition from design to manufacturing. Working closely with cross‑functional teams, you will help drive product quality, performance, and innovation. 

What you will be working on 

• Design and develop mechanical systems and components for semiconductor equipment, applying sound engineering principles, product specifications, and research data. 
• Perform engineering calculations related to structural, thermal, and fluid dynamics to support robust and reliable designs. 
• Create and maintain Creo Parametric 3D CAD models and detailed drawings, ranging from individual parts to complex assemblies. 
• Evaluate the feasibility of product proposals, resolve technical issues, and develop new designs in compliance with product safety and design standards. 
• Manage Continuous Improvement Projects (CIPs) and ensure clear communication across teams and with external partners. 
• Prepare complete and clear engineering documentation to support prototype builds, manufacturing, and testing of released products. 
• Support engineering project activities, including report preparation, schedule planning, design reviews, and coordination with cross‑functional teams. 
• Establish product configurations and structures for new products and features in both development and manufacturing environments. 
• Participate in and present at design reviews for new designs, product enhancements, and customer‑specific solutions. 
• Support hardware development, installation, and testing to verify performance; create, review, and approve test plans and test procedures. 
• Interface with manufacturing, suppliers, and other engineering teams to ensure smooth product transfer into the manufacturing cycle. 
• Review and process engineering change requests (ECR/ECO) and support continuous product and process improvements. 
• Travel to customer or supplier sites as needed to support technical discussions and project execution. 
• Maintain a strong commitment to safety in all activities. 

What we are looking for 

• Master’s degree in mechanical engineering or related disciplines. 
• Several years of hands‑on experience in mechanical design and development of complex systems within semiconductor or capital equipment industries. 
• Practical experience with mechanical systems such as vacuum chambers, reactors, susceptor heaters, gas delivery systems, pneumatics, cooling circuits. 
• Ability to perform simulation and engineering analysis (e.g., structural, thermal, fluid dynamics) to support robust and reliable designs. 
• Proficiency in Creo (or equivalent CAD tools) and ability to create detailed engineering drawings 
• Solid understanding of materials, manufacturing processes, and mechanical design fundamentals. 
• Strong problem‑solving skills and the ability to work effectively in a cross‑functional, fast‑paced environment. 

What sets you apart 

• PhD in Mechanical Engineering or related degree.  
• Experience with semiconductor deposition equipment (ALD, CVD). 
• Strong capability to run and interpret Multiphysics simulations (structural, thermal, CFD) and apply the results to improve design specifications. 
• Experience with Susceptor heaters, Vacuum and electrostatic chucks. 
• Proficiency in GD&T standards (ASME Y14.5 and/or ISO 1101). 
• Experience supporting products through the full lifecycle, from concept and design to manufacturing release. 
• Ability to independently manage technical tasks while contributing effectively as a team player. 

The Key Account Technologists are the ASM product experts who support extensive customer and internal company contacts while driving the introduction of new products, product improvements, and product modifications.  As a Key Account Technologist (KAT) you'll help to expand product market share by helping win development tool of record (DTOR) selections and supporting competitive process application performance of the installed base. Further, the role requires someone who is not only skilled in R&D/Innovation, development, engineering, and design for manufacturability, but also someone who can be a key team member developing and delivering the ALD technology roadmap. This role requires interactions and communication between the product development team and the customer to ensure customer issues and concerns are being addressed with solutions and timelines.  A persistent approach to Product Life Cycle (PLC) will also be required to achieve strong engagement with the new product development team. This position requires Korean, Japanese or Mandarin language skills.

RESPONSIBILITIES:

• Responsible for process application NPI (New Product Introduction), product improvements, and product modifications for key product unit (KPU) installed base
• Develop and maintain relationships with key customers.
• Responsible for managing all the technical account aspects of customers
• Responsible for resolution of process and hardware-related escalations in the field
• Responsible for defining, maintaining, and implementing BKM process for all process applications – including standards, specs, and recipes, installed base performance
• Support highly engaged working relationship between KAT department, ASM’s customer account teams and customers’ engineers to ensure all customer needs and requirements are understood and addressed
• Drive close cooperation with multiple internal stakeholders, especially with Process Development teams, Global Sales, Service and Spares, Account Teams, Engineering and Global Product Management (GPM)

Key SELECTION CRITERIA:

• Excellent Korean, Japanese, or Mandarin language skills, both written and spoken
• 5+ years (or 3+ years with Ph.D.) experience in the semiconductor wafer processing or capital equipment industry
• Master’s degree (or above) in material science, physics, chemical, mechanical or electrical engineering, or related field
• Related work experience can include process engineering, technical marketing, or product support
• Proven ability to drive continuous improvement across operations
• Able to build long term relationships of trust with customers
• Strong written and verbal communication skills including excellent presentation and influencing skills
• Semiconductor experience should be primarily focused on atomic layer deposition (ALD) or chemical vapor deposition (CVD).
• Experience in work function, metallization, silicides, and electrodes in logic or memory is preferred

PERSONAL / professional ATTRIBUTES:

• Self-starter with high energy and strong work ethic
• Highly motivated and results driven
• A proactive change agent
• A strategic thinker with the ability to implement and drive tactics, strong at execution
• A problem solver – communication comes naturally when solving problems and addressing roadblocks.
• Able to independently make and execute decisions in a timely manner, leading people accordingly
• Ability to lead and influence others across cultures
• Highly collaborative and able to manage conflict

Travel:

• Flexibility to travel up to 30% of the time (internationally)

Job’s mission

As ASM accelerates its global PLM modernization journey, you’ll play a pivotal role in shaping how our engineers design, build, and innovate. You will guide the evolution of enterprise Teamcenter solutions that power our product development and manufacturing workflows across a global engineering community. Your work will help streamline collaboration, sharpen data quality, and bring next‑generation semiconductor technology to life faster and more reliably.

What you will be working on

• Work closely with engineering and manufacturing teams to translate business needs into scalable PLM and Teamcenter solutions.
• Support user adoption by guiding use cases, partnering with vendors, and driving enhancements that elevate product capabilities and business processes.
• Identify opportunities and challenges across current workflows and help shape the PLM technology strategy and roadmap.
• Maintain, optimize, and evolve Teamcenter configurations, processes, integrations, and supporting tools.
• Lead complex, multi‑team technology initiatives that deliver measurable improvements in efficiency and engineering experience.
• Apply project management practices that help teams work more effectively and collaboratively.
• Use your understanding of PLM architecture—workflows, APIs, runtime behavior, and system characteristics—to build scalable, reliable solutions.
• Manage PLM processes and tools in an electro‑mechanical environment.
• Drive integrations and automation with adjacent business systems including Oracle and Agile.
• Develop and monitor PLM data metrics to maintain stability, data accuracy, and smooth operation.
• Partner with cross‑functional users to gather insights and enhance product development, manufacturing, and operations workflows.
• Monitor and enhance Engineering Change processes to support quality and faster cycle times.
• Define product structure and Bill of Material (BOM) standards that ensure consistent, high‑quality data.
• Champion continuous improvement across PLM processes and lifecycle governance.
• Collaborate with developers to scope and implement new features that support evolving business needs.
• Deliver training, workshops, and guidance to promote PLM best practices and adoption.
• Stay current with industry trends and emerging technologies to drive ongoing improvement within PLM and engineering systems.

What we are looking for

• BS + 8 years, OR MS + 4 years, OR PhD with relevant experience in Mechanical, Industrial, or related engineering fields.
• Extensive experience implementing Siemens Teamcenter PLM solutions including configuration, setup, upgrades, and solution design.
• Experience leading requirements gathering, fit‑gap analysis, functional design, system testing, solution delivery, and user acceptance.
• Experience leading at least one full Teamcenter implementation in a complex engineering or manufacturing environment.
• Hands‑on experience with Teamcenter modules, BMIDE, ITK, and AWC development.
• Experience supporting PLM processes within an electro‑mechanical product environment.
• Experience integrating PLM with enterprise applications such as Oracle and Agile.
• Experience partnering with design engineering, manufacturing, and operations teams to drive improvements.
• Experience improving Engineering Change processes and lifecycle governance.
• Experience defining product structures and BOM standards.
• Ability to deliver training and support ongoing PLM adoption.
• Understanding of PLM architecture including workflows, APIs, and system behavior.

What sets you apart

• Experience with PLM and 3D CAD in the semiconductor industry.
• Experience with NPI lifecycle management, BOM configuration, and engineering change processes.
• Experience developing PLM metrics and dashboards.
• Experience supporting globally distributed engineering teams.
• Experience leading modernization or transformation initiatives within PLM or Engineering IT.

Be the Expert Others Rely On—Advance EPI Technology at ASM

Global Product Support Engineer

At ASM, our technology enables the world’s most advanced semiconductor manufacturing—and when the challenges are toughest, our experts step in. We’re seeking a Senior Global Product Support Engineer who thrives on solving complex problems, supporting cutting‑edge tools, and making a real difference for customers and field teams worldwide.

In this role, you’ll serve as the go‑to technical authority, supporting advanced EPI systems when issues demand deep expertise beyond first‑line support. Your work will directly impact tool performance, customer confidence, and ASM’s reputation for technical excellence.

What You’ll Do

As a Global Product Support Engineer, you’ll operate at the highest technical level, combining hands‑on problem solving with global collaboration:

• Provide advanced technical support for complex electro‑mechanical equipment and sophisticated software systems
• Diagnose, troubleshoot, repair, and debug issues escalated by field engineers and product support teams
• Act as the escalation point when standard troubleshooting paths are exhausted, delivering clear solutions under pressure
• Partner with engineering teams by reporting design, reliability, and maintenance insights that drive continuous improvement
• Support customer installations and deliver technical training when deeper expertise is required
• Engage directly with customers to resolve highly technical issues and ensure optimal system performance
• Travel globally (up to 50%) to support field operations, customer sites, and critical escalations

What We’re Looking For

You bring strong semiconductor experience, technical depth, and the confidence to lead in high‑stakes situations:

• Proven experience diagnosing and resolving complex technical issues
• Minimum 3 years of experience in semiconductor manufacturing environments
• Bachelor’s degree in Engineering (Mechanical or Electrical Engineering preferred)
• Strong understanding of electro‑mechanical systems and software‑driven equipment
• Excellent analytical and problem‑solving skills
• Ability to clearly communicate complex technical concepts to both technical and non‑technical audiences
• Strong presentation skills and comfort leading technical discussions
• Willingness and ability to travel locally and internationally up to 50%
• Customer‑focused mindset with the ability to remain effective in challenging, time‑critical situations

The Key Account Technologists are the ASM product experts who support extensive customer and internal company contacts while driving the introduction of new products, product improvements, and product modifications.  As a Key Account Technologist (KAT) you'll help to expand product market share by helping win development tool of record (DTOR) selections and supporting competitive process application performance of the installed base. Further, the role requires someone who is not only skilled in R&D/Innovation, development, engineering, and design for manufacturability, but also someone who can be a key team member developing and delivering the PECVD technology roadmap. This role requires interactions and communication between the product development team and the customer to ensure customer issues and concerns are being addressed with solutions and timelines.  A persistent approach to Product Life Cycle (PLC) will also be required to achieve strong engagement with the new product development team.

Responsibilities:

• Responsible for process application NPI (New Product Introduction), product improvements, and product modifications for key product unit (KPU) installed base
• Develop and maintain relationships with key customers.
• Responsible for managing all the technical account aspects of customers
• Responsible for resolution of New process escalations in the field during NPI stage
• Responsible for defining and implementing BKM process for all process applications – including standards, specs, and recipes, installed base performance
• Support highly engaged working relationship between KAT department, ASM’s customer account teams and customers’ engineers to ensure all customer needs and requirements are understood and addressed
• Drive close cooperation with multiple internal stakeholders, especially with Process Development teams, Business Development Team, Account Teams, Engineering and Global Product Management (GPM)

Qualifications:

• 5+ years (or 3+ years with Ph.D.) experience in the semiconductor wafer processing or capital equipment industry
• Master’s degree (or above) in material science, physics, chemical, mechanical or electrical engineering, or related field
• Related work experience can include process engineering, technical marketing, or product support
• Proven ability to drive continuous improvement across operations
• Able to build long term relationships of trust with customers
• Strong written and verbal communication skills including excellent presentation and influencing skills
• Semiconductor experience should be primarily focused on PECVD.
• Experience in work function, metallization, silicides, and electrodes in logic or memory is preferred

Attributes:

• Self-starter with high energy and strong work ethic
• Highly motivated and results driven
• A proactive change agent
• A strategic thinker with the ability to implement and drive tactics, strong at execution
• A problem solver – communication comes naturally when solving problems and addressing roadblocks.
• Able to independently make and execute decisions in a timely manner, leading people accordingly
• Ability to lead and influence others across cultures
• Highly collaborative and able to manage conflict

Travel:

• Flexibility to travel up to 30% of the time (internationally)

We are seeking R&D-oriented Engineers to join our team in the development and improvement of semiconductor manufacturing equipment, specifically focusing on plasma-based chambers.

Key Responsibilities:

· Conduct research and development of components and mechanisms, including concept creation, feasibility studies, and practical evaluation/testing.

· Perform hardware characterization, define process window, and analyze process-hardware interaction.

· Design experiments, collect data, analyze results, and compile reports on various process development experiments

· Develop new equipment and functionalities, as well as improve existing equipment, from specification to detailed design.

· Ability to function in multi-disciplined fields (Process development, Hardware development and Metrology)

Required Skills:

· PhD in Physics, Engineering (Chemical, Electrical, Mechanical, or related fields), Material Science or Master degree with at least 3 years professional experience.

· In-depth knowledge of low-pressure RF plasma systems, including ICP, CCP, and microwave plasma sources

· Strong understanding of plasma-surface interactions, and precursor/plasma chemistry. Familiarity with PECVD, PEALD, RIE process mechanisms.

· Excellent communication skills for technical documentation, cross-functional collaboration, and customer-facing discussions

Preferred Skills:

· Familiarity with epitaxial silicon growth and characterization

· Familiarity with EM and multi-physics simulation tools (e.g., COMSOL, High Frequency Simulation software such as Ansys HFSS, CST studio )

· Familiarity with plasma diagnostics (e.g., Langmuir probes, OES, VI probes)

· Familiarity with common thin-film & chemical characterization & metrology techniques including: SEM, TEM, XRD, Ellipsometry, XPS / AES as well as ICP-MS, particle analysis, sheet resistance probe analysis etc

As a Process Productivity Engineer at ASM, you will work with our customers as a system level expert focused on product support for new product development. This role will require 25-50% domestic and international travel (depending on product cycle).

Responsibilities: 

• Drives and owns top customer productivity issues (e.g., defect reduction, tool matching, tool availability, etc.) for products in the field across the product life cycle, from new product introduction through high volume manufacturing.  
• Interaction with Hardware, Electrical, Controls, Product Support, Process, and Software engineering teams to become the system level expert on new products transferred to the field. Become an expert on the interaction of the products with the customer processes and resulting tool productivity.
• Provides guidance to engineering during the design phase of new products on key customer requirements and needs, including productivity specifications (e.g., defects, tool matching, throughput, etc.) and process best practices.
• Designs and conducts experiments, in addition to measuring and interpreting experimental output, aimed at fulfilling stated objectives using Design of Experiments (DOE) and Response Surface Methodology (RSM).
• Troubleshoots equipment problems and is personally and actively engaged in problem via “hands-on” modalities.
• Owns marathon qualification of new processes and products in the development lab, including data collection, analysis, and improvement plans. Works closely with Process, Product Support, and Hardware engineering teams providing real time feedback of marathon issues and recommended solutions.
• Ensure processes follow best known practices throughout the product life cycle, from before the first eval shipment through the HVM ramp. Share and proliferate new solutions across internal teams, including Process, Product Support, and Field Support engineering teams.

Education and Requirements:

• Master’s or PhD Degree in Chemical Engineering, Materials Science, Chemistry, Physics, Mechanical Engineering, Electrical Engineering, or related degree.
• Hands-on and/or course work experience with hardware.
• Strong technical troubleshooting and root cause analysis skills.
• Demonstrated ability to characterize processes and/or hardware using first principles and experimental design techniques (e.g., DOE, RSM).
• High motivation, enthusiasm and curiosity to learn.
• Interested in working with new products, testing them and becoming a system level expert.
• Excellent verbal and written communication skills, with ability to clearly communicate advanced technical constructs in direct and concise manner.
• Statistical analysis and script writing in Python, Matlab, or similar is a plus.
• Ability to travel (domestic and international) 25-50%

We are seeking a highly motivated System Engineer to join our Sensor Technology Group, a dynamic team driving innovation in advanced sensor solutions for semiconductor manufacturing equipment. This role offers a unique opportunity to work at the intersection of mechanical, electrical, chemical, and materials engineering, contributing to the development of next-generation sensor systems that enable precision, reliability, and performance in semiconductor fabrication.

Responsibilities:

• Lead and support the design, integration, and validation of sensor systems within semiconductor equipment platforms.
• Collaborate cross-functionally with hardware, software, and process engineering teams to define system requirements and architecture.
• Develop and execute test plans to evaluate sensor performance under various operating conditions.
• Analyze data to identify trends, troubleshoot issues, and optimize sensor functionality.
• Drive continuous improvement in sensor system reliability, manufacturability, and cost-effectiveness.
• Support technology transfer from R&D to production, including documentation and training.
• Stay current with emerging sensor technologies and industry trends.

Requirements:

• Bachelor’s or Master’s degree in mechanical engineering, Electrical Engineering, Chemical Engineering, Materials Science, or a related field.
• 3+ years of experience in system engineering, preferably in semiconductor equipment or high-tech industries.
• Experience with system integration, data acquisition, and signal processing.
• Experience in tools such as JMP, Python, or similar for data analysis.
• Excellent problem-solving skills and ability to work in a fast-paced, collaborative environment.
• Strong communication skills and ability to present technical concepts to diverse audiences.

Preferred Qualifications:

• Relevant work experience in semiconductor equipment or a similar industry.
• knowledge of semi-conductor vacuum system, automatic wafer transfer (mechatronic: robotics, servo control, sensor and actuators) and integration into complex wafer processing system.
• Understanding of sensor technologies (e.g., thermal, optical, chemical, pressure, flow).
• Semiconductor related metrology knowledge (instrumentation to qualify & measure thickness, particles, electrical resistivity, etc.)
• Experience transitioning third party tools and service to in-house is particularly interesting

In this role as a Senior Engineer, Surface Technology (Parts Coating) reporting within the Surface Technology Group, you will work with other ASM global technology team members including materials scientists, equipment engineers, process, quality and field service engineers as well as external customers to solve time critical or strategic technology challenges and develop unique advanced solutions in collaborative partnerships.

The position requires the individual to:

• Drive improvements in Thermal & Plasma Enhanced ALD system parts longevity, stability, refurbishment / service strategy and process performance to enable reliable and efficient deposition of a range of next generation advanced thin film materials exhibiting various electrical & physical properties.
• Work independently to develop new approaches to coat, protect and refurbish internal vacuum chamber components to improve performance, lifetime, defectivity and CoO for customers processing various materials for use as functional/active layers in semiconductor device stacks.
• Connect process conditions, physical characterization, and electrical response towards understanding of mechanisms.
• Specify, procure and develop state-of-the-art advanced process equipment.
• Formulate new protective and release coating formulations.
• Leverage advanced knowledge of various atmospheric & vacuum based etch & surface treatment approaches and utilize expertise in a range of surface / bulk characterization methods.
• Direct / manage projects & relationships with critical 3^rd party suppliers & supporting institutions.
• Have a passion for surface engineering processes, be inquisitive to drive projects & root-cause failure investigations whilst being systematic & entrepreneurial in mind-set.
• Demonstrate experience within a high volume semiconductor clean room environment.
• Be based within the ASM Phoenix AZ campus but open to occasional travel to additional global ASM, customer and supplier global sites when necessary.

Preferred Qualifications:

• Bachelors science degree ideally involving theory & practice of an appropriate thin film deposition technique whilst studying Materials Science, Physics, Chemical Engineering, Chemistry, Electrical Engineering or similar technical field.
• Minimum 1-5 years of experience in ALD (atomic layer deposition), PECVD (plasma enhanced chemical vapor deposition) or PVD (physical vapor deposition) technology,
• Expertise in coating equipment design and electro-mechanical development approaches highly advantageous.
• Experience using ASM EmerALD systems a plus.
• Solid understanding of Design-of-Experiments execution and statistical data analysis.
• Familiarity with common thin-film & chemical characterization & metrology techniques including: Optical microscopy, SEM, TEM, XRD, Ellipsometry, XPS / AES as well as ICP-MS, particle analysis, sheet resistance probe analysis etc.

• Ability to engage with customers both on a highly technical basis and personally.
• Ability to self-manage projects from conception to high volume production necessary
• Self-motivated, results-oriented with high commitment to work quality in a fast-paced environment.
• Proven ability to solve complex analytical problems and provide robust solutions based on solid technical background.

As a Senior Mechanical Engineer for our Value Engineering team at ASM, you will play a pivotal role in enhancing aftermarket product value by refining designs, streamlining manufacturing processes, and reducing costs. This role is focused on achieving the ideal balance between functionality, reliability, and cost efficiency in a highly competitive, innovation-driven market.

Key Responsibilities

• Ensure quality of aftermarket parts by collaborating closely with suppliers, resolving issues related to parts falling outside of specifications, and working with Engineering to document and implement corrective actions.
• Engage with customers and local account teams to address field reported issues related to aftermarket part performance and quality.
• Lead and implement ASM process protocols, frequently reviewing and enhancing field service solutions.
• Manage Continuous Improvement Projects (CIPs) and ensure clear communication across teams and with external partners.
• Define project scopes, generate detailed reports, and track progress against timelines.
• Collaborate with global teams—including technicians, engineers, procurement, manufacturing, and management—to address project-specific requirements.
• Deliver reliable, high-quality solutions and develop new Best-Known Methods (BKMs) for field and customer use.
• Travel domestically and internationally as needed (10–20%).
• Maintain a strong commitment to safety in all activities.

Qualifications

• Bachelor’s degree in mechanical engineering or a related field
• Minimum 3 year hardware and process engineering experience within the semiconductor industry; strong understanding of semiconductor fab operations required; ASM specific experience desired
• Proficient in reviewing 3D CAD models and interpreting/redlining engineering drawings.
• Demonstrated ability in cross-functional communication, data analysis, and presentation; strong interpersonal skills for working with suppliers, internal teams, and customers
• Experience in executing Failure Analysis (FA), including planning, real-time reporting, and timely closure of corrective actions.
• Previous experience in Supplier Quality Control is a plus     
• Solid understanding of materials, including metals, plastics, coatings, and finishes.
• Knowledge of deposition technologies (CVD, ALD, EPI, PVD) is a plus.
• Proficiency in Microsoft Office, Creo, and AutoCAD; experience with FEA and CFD analysis is preferred.
• Strong understanding of ANSI Y14.5 standards for geometric dimensioning and tolerancing

Job’s mission

What you will be working on

• Design and develop electromechanical systems integrating robotics with advanced control architectures.
• Implement visual-aided closed-loop control systems with real-time motion adjustment.
• Apply image processing algorithms using OpenCV, MATLAB, or similar libraries to guide robotic motion.
• Develop and tune servo control systems for precision and stability.
• Program and deploy control software for robotic platforms and embedded controllers (C/C++, Python, ROS).
• Develop, debug, and maintain PLC programs using Siemens, Allen-Bradley, or Beckhoff platforms.
• Collaborate with mechanical, electrical, and software teams for seamless integration.
• Participate in prototyping, testing, validation, and field deployment.
• Document system architecture, design decisions, and performance metrics.
• Provide technical support for troubleshooting and maintenance.

What we are looking for

• BS in Robotics, Mechatronics, Electrical Engineering, or related field with 12+ years of experience; MS with 8+ years; PhD with 4+ years.
• Proven expertise in control systems, including PID tuning, kinematics, and dynamic modeling.
• Hands-on experience with machine vision and image processing.
• Strong background in servo drive configuration and motor control.
• Proficiency in control software development for embedded and real-time systems.
• Experience with PLC programming and industrial communication protocols.
• Excellent problem-solving skills and ability to work independently or in teams.
• Strong communication skills for documentation and collaboration.

What sets you apart

• Familiarity with robotic frameworks such as ROS and tools like MATLAB/Simulink, LabVIEW, or TwinCAT.
• Knowledge of low-level communication interfaces (CAN bus, I2C, SPI, UART).
• Basic mechanical design principles and CAD tools.
• Experience with sensor integration (cameras, LIDAR, proximity sensors) and real-time data processing.
• Skills in actuator control and trajectory planning.
• Knowledge of semiconductor manufacturing processes and automation requirements.
• Experience with industrial robots or willingness to learn these applications.

Your impact

The Maintenance Engineer is responsible for improving equipment reliability, availability, and maintainability in an automated manufacturing environment. This role provides engineering ownership of preventive, predictive, and corrective maintenance strategies for automated production systems, ensuring safe, stable, and cost-effective operation. The Maintenance Engineer partners closely with Manufacturing, Controls, and Maintenance teams to reduce downtime, extend asset life, and support production scaling.

What You'll Do:

Location: Onsite at our Phoenix, AZ Pinnacle office or our Mesa, AZ Skybridge facility.
Reports to: Senior Manager, Manufacturing Engineering - Assets Reliability
Direct Reports: N/A

• Ensure that automated manufacturing equipment is reliable. This includes robots, PLC-controlled machines, conveyors, vision systems, and material handling equipment.
• Lead root cause analysis (RCA) for recurring failures, downtime events, and chronic equipment issues.
• Develop and implement corrective actions to eliminate repeat failures and improve mean time between failures (MTBF).
• Design, optimize, and sustain preventive and predictive maintenance programs aligned with equipment criticality.
• Analyze maintenance data and downtime trends to refine maintenance intervals and task effectiveness.
• Use maintenance techniques based on conditions when appropriate. This includes methods such as vibration, thermal, and runtime-based techniques.
• Create and update maintenance procedures. Write troubleshooting guides. Keep equipment documentation current.
• Standardize maintenance practices across similar equipment and production lines.
• Support spare parts strategy, critical spares identification, and inventory optimization.

Cross-Functional Collaboration

• Partner with Controls Engineers on PLC diagnostics, automation troubleshooting, and system upgrades.
• Assist Maintenance Technicians. Offer troubleshooting support, training, and technical advice.
• Collaborate with Manufacturing Engineering and Operations to support new equipment launches and process changes.

Continuous Improvement & Cost Reduction

• Drive reliability-focused continuous improvement initiatives to reduce downtime, maintenance cost, and production risk.
• Support capital equipment evaluations with maintainability and lifecycle cost input.
• Track and report key metrics including downtime, MTTR, MTBF, maintenance cost, and equipment availability.

Operational Support

• Provide on-floor engineering support during critical downtime events and production ramp-ups.
• Participate in daily production, maintenance, and reliability meetings.
• Support off-shift or weekend activities during launches, major repairs, or critical issues as required.

Qualifications

Required

• Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Mechatronics, or related field.
• 3–6 years of experience in maintenance, reliability, or automation engineering within a manufacturing environment.
• Strong understanding of automated equipment, electrical systems, and mechanical components.
• Experience performing root cause analysis and implementing corrective actions.
• Ability to work effectively in fast-paced, production-driven environments.

What you Bring

• Experience with PLC-based automation systems is important. This includes performing diagnostics and troubleshooting.
• Familiarity with CMMS systems and maintenance data analysis.
• Lean Manufacturing or Reliability Engineering experience.
• Experience supporting high-volume or high-mix automated production lines.
• Equipment reliability and failure analysis
• Automation troubleshooting
• Preventive and predictive maintenance strategy
• Cross-functional communication
• Data-driven problem solving
• Regular presence on the manufacturing floor required.
• Ability to support hands-on troubleshooting activities.
• Occasional off-shift or weekend work may be required during critical events.

Benefits listed herein may vary depending on the nature of your employment and the location where you work

Your Impact

As a Manufacturing Test Engineer, you’ll play a critical role in ensuring the quality and performance of the devices that help save lives and keep communities safer. You’ll develop and support advanced automated test systems used in the production of our cutting-edge body-worn cameras, smart weapons, and other connected devices. Your work will directly impact our ability to scale with quality, reliability, and speed.

What You’ll Do

Location: Onsite at our Pinnacle location in Phoenix, AZ
Reports to: Manufacturing Engineering Manager, Video
Direct Reports: N/A

• Design, develop, and maintain robust automated test systems for Axon’s manufacturing lines, leveraging LabVIEW and TestStand
• Collaborate with cross-functional teams—hardware, firmware, software, and manufacturing—to define test strategies and implement scalable solutions
• Drive continuous improvement in test coverage, reliability, and efficiency to meet Axon’s quality and throughput goals
• Support New Product Introduction (NPI) by developing and deploying test systems that scale from prototype to mass production
• Troubleshoot complex test issues and perform root cause analysis on hardware and system-level failures
• Generate detailed test documentation and support the training of technicians and operators
• Create Statements of Work (SOW) and other technical specifications for third party integrators.
• Perform design reviews, software audits and acceptance testing with third party integrators.
• Collaborate on mechanical fixture design.
• Analyze test data, generate reports, and provide feedback to engineering and quality teams.
• Ensure compliance with safety and quality standards in a fast-paced, high-growth environment

What You Bring

• Bachelor’s degree in Electrical Engineering, Computer Engineering, or a related technical field
• 8+ years of progressive experience in test engineering, with a proven track record in developing and leading automated test solutions for electronic hardware, preferably in manufacturing environments
• 5+ years of advanced, hands-on experience with LabVIEW for complex test and measurement systems, including architecture design, reusable code modules, real-time data acquisition, instrument drivers, user interfaces, and integration with external hardware.
• 2+ years (ideally 4+ years at senior level) of experience with NI TestStand for architecting, sequencing, deploying, and maintaining automated test executive systems; strong proficiency in custom step types, code modules, process models, report generation, and database integration.
• Ability to read, interpret, and critique electrical schematics; design, build, debug, and optimize custom test fixtures of medium complexity; troubleshoot hardware faults at component and system levels to root cause; ensure fixture reliability, repeatability, and safety in production environments for a range of electronic products.
• Solid understanding of manufacturing test methods for digital and analog electronics
• Excellent communication, documentation, and cross-functional collaboration abilities
• Passion for Axon’s mission and a desire to work on impactful, real-world products

Benefits that Benefit You

• Competitive salary and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• And yes, we have snacks in our offices

Benefits listed herein may vary depending on the nature of your employment and the location where you work.

Your Impact

As a Manufacturing Quality Engineer II, you will be a key member of the Global Quality team. You will support the full product lifecycle, ensuring high-quality manufacturing processes and products that meet or exceed Axon’s standards and customer expectations.

What You’ll Do 

• Participate in the Axon Product Lifecycle (APL) process to ensure compliance with quality deliverables including issue resolution (CAPA), validation plans, CTQ identification, FAIR/PPAP documentation, and quality monitoring implementation.
• Lead nonconforming material review (NCMR/MRB) and manage material dispositions with cross-functional teams.
• Drive and manage 8D investigations and root cause analysis (RCA); implement effective corrective and preventive actions.
• Develop and maintain FAIRs, PPAP documentation, and AQL sampling plans for incoming, in-process, and final inspections.
• Provide engineering support to Receiving Inspection including Gage R&R studies, MSA, and inspection procedure development.
• Support new product introduction (NPI) through validation, process control, and risk mitigation strategies (e.g., PFMEA).
• Perform risk assessment and drive risk mitigation and execution for line stoppages, shipment stoppages, product launch blockers and other highly escalated situations.
• Implement and monitor Statistical Process Control (SPC) systems to drive continuous improvement.
• Use DMAIC principles and statistical analysis (e.g., Minitab, JMP) to identify process improvement opportunities.
• Interface with manufacturing, engineering, and design teams to drive process consistency and yield improvements.
• Participate in internal and supplier audits; ensure compliance with industry standards (e.g., IPC-A-610).
• Manage quality-related documentation including procedures, inspection plans, and training materials.
• Partner with supply chain and procurement to ensure supplier quality and performance metrics are met.
• Support Lean Manufacturing initiatives and contribute to Kaizen events and value stream mapping.
• Communicate effectively across departments to ensure quality alignment and customer satisfaction.
• Demonstrate strong ownership and ability to work autonomously in a fast-paced, ambiguous environment.

What You Bring

• Bachelor’s degree in Mechanical, Electrical, Industrial, Quality Engineering, or related discipline.
• 3+ years of experience in a production/manufacturing quality engineering role.
• Experience with CAPA, RCA/8D, PPAP, FAIR, PFMEA, and validation activities.
• Certified Six Sigma Green Belt or Black Belt (CSSGB/CSSBB) or equivalent experience in process improvement.
• Strong knowledge of IPC-A-610 and relevant industry standards.
• Proficiency in MS Office tools and statistical analysis software such as Minitab, JMP, or similar.
• Strong understanding of engineering drawings, specifications, GD&T, and inspection techniques.
• Experience with Quality Management Systems (QMS), ISO 9001 or AS9100 is a plus.
• Excellent communication, problem-solving, and technical report writing skills.
• Strong time management, multitasking, and organizational skills.
• Proactive, results-oriented, and able to thrive in a dynamic environment.
• Internal or external audit experience preferred.

Benefits that Benefit You

• Competitive salary and 401(k) with employer match

• Discretionary paid time off

• Paid parental leave for all

• Medical, Dental, Vision insurance

• Fitness programs and wellness support

• Learning & development opportunities

• Office snacks and collaborative spaces

  Benefits listed may vary based on employment type and location.

Responsibilities:

• Design mechanical systems and products supporting ASM process chambers using sound engineering principles
• Drive data-based design decisions in a cross-functional team environment
• Lead hardware development from concept through testing and HVM readiness
• Create and manage 3D CAD models (Creo) and 2D drawings with GD&T
• Perform engineering analysis including structural, thermal, and fluid dynamics
• Maintain product configuration using modern PLM tools
• Participate in design reviews and drive DFx activities
• Collaborate with suppliers to resolve fabrication challenges
• Prepare documentation for manufacturing and testing
• Support cost estimation for new features and enhancements

Requirements:

• Master’s degree in mechanical engineering
• 2+ years of experience in mechanical design using 3D CAD (Creo preferred)
• Experience with FEA and CFD tools (e.g., Ansys, Comsol)
• Familiarity with part fabrication methods (CNC, sheet metal, welding, coatings)
• Knowledge of GD&T and engineering drawing standards
• Comfortable working in lab and cleanroom environments, including manual tasks

Preferred Qualifications

• Experience in semiconductor or capital equipment industry
• Knowledge of vacuum systems, wafer handling, gas/fluid delivery, robotics
• Experience with modern DFx practices
• Familiarity with SEMI standards (e.g., S2)
• Experience with PLM tools and methodologies
• Ability to mentor junior engineers and manage large design projects
• Willingness to travel (<10%) domestically and internationally

As a Principal Engineer (Hardware), Advanced Packaging, you will play a key role in advancing ASM’s semiconductor process technologies. You’ll leverage your expertise in thin-film deposition and materials characterization to develop innovative solutions for next-generation devices. Your work will directly influence product performance and enable breakthroughs in logic, memory, and power applications. We are currently recruiting for multiple openings. 

What you will be working on

• Research, develop, and optimize semiconductor processes focused on Advanced Packaging including depositions and surface preparation.
• Design and conduct complex experiments using DOE and RSM methodologies; interpret and analyze experimental data.
• Troubleshoot equipment issues through hands-on engagement and ensure successful product transfer to customers.
• Provide expert technical support for complex electro/mechanical equipment and computer systems.
• Respond to and resolve issues escalated by first-line product support teams.
• Report design, reliability, and maintenance problems to engineering teams for resolution.
• Assist in customer installations and provide technical training as needed.
• Deliver support for highly technical or sophisticated products to customers and users.
• Travel globally up to 50% of the time to support field operations.

What we are looking for

• Master’s or PhD in Mechanical or Electrical Engineering preferred
• 10+ years of combined education, research, and work experience in thin-film deposition and advanced packaging processes.
• At least 5 years of experience in semiconductor process engineering or semiconductor equipment technology.
• 2-5 years of experience in customer support, product management, or product marketing roles.
• Demonstrated knowledge of hardware to process dependencies and comfort with fingerprinting chamber / tool critical components
• Proven experience in diagnosing and troubleshooting complex technical issues
• Strong understanding of electro/mechanical equipment and software systems
• Excellent problem-solving and analytical skills
• Ability to communicate effectively with both technical and non-technical stakeholders
• Strong presentation experience and skills
• Willingness and ability to travel globally up to 50% of the time; local and international
• Customer-focused mindset with the ability to manage challenging situations

As a Senior Software Engineer at ASM, you’ll sit at the intersection of cutting-edge software, complex hardware, and real-world customer impact. You’ll be a technical leader who solves the toughest software challenges in semiconductor manufacturing—driving system reliability, safety, and performance for our global customers. In this role, you won’t just fix issues—you’ll lead investigations, influence architecture, and deliver long-term, systemic improvements that power advanced semiconductor technology worldwide.

What You’ll Be Working On

• Lead deep technical investigations into software-related safety interlocks, validating corrective and preventive actions.
• Analyze and optimize multiple interacting subsystems, gaining end-to-end understanding of full platform workflows.
• Drive root cause and corrective action (RCCA) using packet captures, log correlation, and system-level analysis.
• Design and evaluate subsystem architectures, including multi-threading and scheduler interactions.
• Develop, test, deploy, maintain, and continuously improve software for advanced semiconductor manufacturing equipment.
• Troubleshoot complex software issues, including real-time control systems.
• Act as a technical escalation point—supporting field engineers and customers globally.
  Partner with QA and Support to reproduce field issues and strengthen regression coverage.
• Author and review system specifications, software designs, and test plans.
• Investigate internal and external technical inquiries, delivering clear analysis and actionable solutions.
• Evaluate and influence software engineering tools and system design decisions.
• Plan and coordinate rapid software fixes and deployments in high-impact environments.
• Present technical insights, progress, and outcomes in customer QBRs, including findings from complex DOE analyses.

What We’re Looking For

• Bachelor’s degree in Computer Science (or related field) with 10+ years of industry experience, or Master’s degree with 4+ years, or PhD with 3+ years of relevant experience
• Strong software development expertise in C++ and/or C#
• Experience developing for Windows and real-time operating systems
• Solid understanding of multi-threaded applications
• Experience working with software documentation, specifications, and APIs

What Sets You Apart

• Advanced degree (Master’s or PhD) and experience in software architecture and machine control systems, ideally within semiconductor equipment
• Hands-on experience with GUIs, device drivers, and interrupt-driven software
• Knowledge of data communications, networking, and EtherCAT
• Understanding of dynamic scheduling algorithms and deadlock avoidance
• Proficiency with development tools such as debuggers, application builders, and configuration management systems
• Ability to triage and diagnose mechanical, electrical, and software issues holistically
• Strong analytical skills, including designing and interpreting complex DOEs using multivariate methods or PCA

Job's mission

Our Epitaxy (EPI) teams are seeking innovative and motivated recent graduates to join their teams as Mechanical Engineers. As a Mechanical Engineer on the EPI team, you will contribute to new product development as well as sustainment and engineering design projects. We are looking for someone who enjoys solving challenging problems, is thorough and detail‑oriented, and can use experimentation and model‑based analysis to identify root causes. Should be able to collaborate effectively with cross‑disciplinary teams to solve complex engineering problems and drive new technological advancements.

Note: This role is intended for candidates who are graduating in Spring 2026 or have graduated within the past two years and have 0–2 years of professional work experience.

What you will be working on

• Apply solid engineering principles, product specifications, and research data to design systems and products for the semiconductor industry.
• Perform engineering calculations, including structural, thermal, and fluid‑dynamics analyses.
• Create and update CAD models and detailed drawings in Creo Parametric, from simple parts to large assemblies.
• Determine design feasibility, troubleshoot technical issues, and develop solutions that meet safety and “first‑time‑right” design requirements using statistical methods.
• Prepare clear, complete engineering documentation to support prototype builds, manufacturing, and testing.
• Conduct project management activities such as schedule creation, reporting, design reviews, and cross‑functional coordination.
• Demonstrate familiarity with common fabrication methods (CNC machining, sheet metal, welding, coatings).
• Collaborate with cross‑functional teams from design and sourcing, introduce new products and ensure smooth transition to manufacturing.
• Execute failure analysis (FA), including planning, real‑time updates, and timely corrective‑action closure.
• Travel to customer sites/supplier sites to participate in technical discussions. 
• Proficiency in Microsoft Office, Creo, and AutoCAD.
• Strong understanding of ANSI Y14.5 GD&T standards.

What we are looking for

• We are looking for candidates who have graduated within the last 0-2 years or will graduate in Spring or Fall 2026 and are eager to begin or advance their career.
• Masters in mechanical engineering or related degree, PhD strongly preferred.
• Cleanroom experience of deposition technologies (CVD, ALD, EPI, PVD), hand-on assembly and testing experiences are strongly preferred

• Experience in course work and projects related to design and development of complex mechanical systems including reactors, vacuum chambers, gas delivery systems, pneumatics, water cooling circuits, and vacuum systems required. 
• Understanding of materials: metals, plastics, surface coatings and surface finishes.
• Excellent verbal and written communication; ability to present design concepts to peers and management in a professional and effective manner. 
• Able to work with a diverse team to achieve requirements and specifications on complex projects. 
• Ability to work in a team environment with aggressive deadlines and multiple priorities while maintaining a team player attitude. 

Xometry is seeking an experienced and charismatic engineer for a critical customer-facing Senior Solutions Engineer role. This role supports Sales by providing perspective, feedback, and sharing knowledge learned from the front lines of the aerospace and defense engineering and manufacturing community. This role is a unique blend of customer engagement, technical expertise, and project management. Solutions Engineering will report into the Pre-Sales Engineering community, which is dually led by Sales and Operations.

This is a unique opportunity to join a dynamic and growing company at the forefront of digital manufacturing. If you are a successful, experienced, team-focused engineer with digital fluency and a sincere enthusiasm about the aerospace industry, this could be the right role for you.

Responsibilities:

Customer Engagement and Sales:

• Partner with Account Executives to drive account growth and retention
• Discover, illuminate, digest, organize and execute major projects
• Join Account Executives in onsite visits with customers when appropriate
• Proactively identify and address potential manufacturing challenges (including DFM)
• Stay informed about upcoming customer projects and initiatives to ensure alignment with Xometry's capabilities
• Gather customer insights and feedback to inform sales strategies

Pre-Sales Engineering:

• Assist Pre-Sales Engineering with knowledge gathering, digestion, and ultimately compiling correct and competitive quotes
• Combine customer knowledge, Xometry partner knowledge, and Xometry system knowledge to rapidly address customer needs and shepherd projects to delivery
• Provide project management and oversight on complex opportunities

Qualifications:

• 10+ years of relevant experience in aerospace and defense engineering and manufacturing roles
• Bachelor's degree in Mechanical Engineering is required
• Experience using Xometry’s services from a customer perspective.  Partner perspective is a bonus.
• Deep familiarity with the methods, materials, culture and products of organizations such as Lockheed Martin, Northrop Grumman, Blue Origin, Anduril, General Dynamics, Moog, SpaceX
• Strong understanding of manufacturing principles, including drawings and GDT
• Particularly strong experience in CNC machining.  Composites, Plastics, Harnesses and Sheet Metal Fab are bonuses
• Familiarity with ISO9001, AS9100d, ITAR, NIST and other common and critical compliance and certification requirements
• Excellent communication, interpersonal, and problem-solving skills.  This must extend into remote/digital environments.
• Ability to travel to customer and/or partner sites as needed.  25%-35% travel is typical.
• Mountain or Pacific home time zone preferred
• Experience with CRM systems such as Salesforce
• Proficiency in Google Suite and Microsoft Office Suite

The estimated base salary range for new hires into this role is $101,000- $150,000 annually + commission depending on factors such as job-related skills, relevant experience, and location. We also offer a competitive benefits package, including 401(k) match, medical, dental and vision insurance; life and disability insurance; generous paid time off including vacation, sick leave, floating and fixed holidays, maternity and bonding leave; EAP, other wellbeing resources; and much more.

#LI-Remote 

Xometry is seeking an experienced and charismatic Senior Solutions Engineer - Automotive Production for a critical customer-facing role. This role supports Sales by providing perspective, feedback, and sharing knowledge learned from the front lines of the automotive and production engineering and manufacturing community. This role is a unique blend of customer engagement, technical expertise, and project management. Solutions Engineering will report into the Pre-Sales Engineering community, which is dually led by Sales and Operations.

This is a unique opportunity to join a dynamic and growing company at the forefront of digital manufacturing. If you are a successful, experienced, team-focused engineer with digital fluency and a sincere enthusiasm about the automotive industry, this could be the right role for you.

Responsibilities:

- Customer Engagement and Sales:

• Partner with Account Executives to drive account growth and retention
• Discover, illuminate, digest, organize and execute major projects. 
• Join Account Executives in onsite visits with customers when appropriate
• Proactively identify and address potential manufacturing challenges (including DFM)
• Stay informed about upcoming customer projects and initiatives to ensure alignment with Xometry's capabilities
• Gather customer insights and feedback to inform sales strategies

- Pre-Sales Engineering:

• Assist Pre-Sales Engineering with knowledge gathering, digestion, and ultimately compiling correct and competitive quotes
• Combine customer knowledge, Xometry partner knowledge, and Xometry system knowledge to rapidly address customer needs and shepherd projects to delivery
• Provide project management and oversight on complex opportunities
• Fully own, from Discovery to Execution, 3-5 major projects
• Create, organize and demonstrate cost breakdowns and statement of work documents

Qualifications:

• 10+ years of relevant experience in automotive manufacturing and program management roles
• A bachelor's degree in Mechanical Engineering or similar is required
• Experience using Xometry’s services from a customer perspective. Partner perspective is a bonus
• Deep familiarity with the methods, materials, culture and products of organizations such as Lucid, Rivian, Tesla, Ford, GM and their suppliers/partners
• Strong understanding of manufacturing principles, including drawings and GDT
• Particularly strong experience in Injection Molding required.  Stamping, Castings, Forgings and other common production methods are bonus
• Familiarity with ISO9001, IATF 16949, APQP/PPAP and other industry certifications and practices
• Excellent communication, interpersonal, and problem-solving skills.  This must extend into remote/digital environments
• Ability to travel to customer and/or partner sites as needed.  25%-35% travel is typical
• Mountain or Pacific home time zone preferred
• Experience with CRM systems such as Salesforce
• Proficiency in Google Suite and Microsoft Office Suite

#LI-Remote

• Candidate must have technical expertise in Manufacturing Technologies, Engineering best practices, and will work with key technology suppliers to drive product quality.
• Work with manufacturing sites and field to understand Non-Conformances details for communication and follow up to closure with suppliers.
• Candidate will develop manufacturing capabilities, drive FMEA, and implement Process Control Systems (PCS) at part supplier sites including the definition of measurement and metrology methods.
• Support the review of SPC data for critical parts and manage suppliers’ OCAP execution and recovery.
• Track supplier’s performance indicators against agreed-upon metrics and key performance indicators. Facilitate and drive suppliers to meet or exceed defined expectations.
• Conduct routine Surveillance and problem resolution audits to determine their compliance with quality standards and contractual requirements.
• Provide leadership during investigations of excursions and work with suppliers to provide comprehensive reports to fulfill ASM SCAR/8D requirements.
• Support conduct of failure analysis (FA) to determine the root cause of product failures and share findings with Engineering, Product Support and other internal and external teams
• Develop positive relationships with suppliers and drive continuous improvement activities from lessons learnt and best practices.
• Up to 20% business travel.

Qualifications:

• Demonstrated expertise specific to material and machining. Preferably with a BSc in Materials Science, Mechanical Engineering or related technical field.
• With 3-5 years of professional experience or demonstrated expertise in supplier engineering managing suppliers for Si material, Ceramic and Quartz.
• Strong communication and interpersonal skills to effectively collaborate with suppliers and internal stakeholders.
• Ability to work effectively across geographies, cultures, disciplines, etc.
• Driven personality with discipline of ownership of responsibilities and is comfortable working independently.
• Attention to details and analytical thinking towards problem solving.
• Semiconductor Equipment industry experience will be an added bonus.

Candidate should have knowledge of the following tools

• Understanding of manufacturing process, metrology, inspection methods and equipment especially for Si material, Ceramic and Quartz.
• Ability to review the drawing to interpret the drawing with supplier
• Statistical Process Control (SPC)
• FMEA include Design FMEA (DFMEA) and Process FMEA (PFMEA)
• Structured Problem Solving (8D)
• Supplier Leadership, Escalation Management and Communication Techniques across a broad range of business escalation types, (Customer, Supplier, Technical, Manufacturing, etc.)

As a (Senior) Principal Engineer (Process and Hardware), Advanced Packaging, you will play a key role in advancing ASM’s semiconductor process technologies. You’ll leverage your expertise in thin-film deposition and materials characterization to develop innovative solutions for next-generation devices. Your work will directly influence product performance and enable breakthroughs in logic, memory, and power applications. We are currently recruiting for multiple openings. 

What you will be working on

• Research, develop, and optimize semiconductor processes focused on Advanced Packaging including depositions and surface preparation.
• Design and conduct complex experiments using DOE and RSM methodologies; interpret and analyze experimental data.
• Collaborate with customers and marketing teams to define requirements and execute demonstrations.
• Troubleshoot equipment issues through hands-on engagement and ensure successful product transfer to customers.
• May supervise process engineering technicians and provide input on performance evaluations.
• Provide expert technical support for complex electro/mechanical equipment and computer systems.
• Respond to and resolve issues escalated by first-line product support teams.
• Report design, reliability, and maintenance problems to engineering teams for resolution.
• Assist in customer installations and provide technical training as needed.
• Deliver support for highly technical or sophisticated products to customers and users.
• Travel globally up to 50% of the time to support field operations.

What we are looking for

• Master’s or PhD in Chemical Engineering, Materials Science, Mechanical or Electrical Engineering preferred
• 10+ years of combined education, research, and work experience in thin-film deposition and advanced packaging processes.
• At least 5 years of experience in semiconductor process engineering or semiconductor equipment technology.
• 2-5 years of experience in customer support, product management, or product marketing roles.
• Demonstrated knowledge of hardware to process dependencies and comfort with fingerprinting chamber / tool critical components
• Ability to manage complex process development projects, including schedules, budgets, and personnel.
• Proven experience in diagnosing and troubleshooting complex technical issues
• Strong understanding of electro/mechanical equipment and software systems
• Excellent problem-solving and analytical skills
• Ability to communicate effectively with both technical and non-technical stakeholders
• Strong presentation experience and skills
• Willingness and ability to travel globally up to 50% of the time; local and international
• Customer-focused mindset with the ability to manage challenging situations

Role overview

At ASM, the Software Engineering team works on delivering software that has immediate, tangible results visible in the operation of semiconductor processing equipment hardware. The hardware includes robotics, gas valves, temperature controllers and other hardware. Come join our team and have the opportunity to:

• Develop Advance software for cutting edge tech
• See your work have real results by driving the most advanced HW in the SEMI industry
• Work with a global team full of talented Software Engineers
• Solve complex problems using AI/ML/Advanced Algorithms/Data Science
• Be part to the team that leads the next generation of SEMI manufacture control Software technology and trends
• Travel globally and visit major chip makers FAB sites
• Work in Phoenix, the heart of the next SEMI tech hub

Note: This role is intended for candidates who are graduating in Spring 2026 or have graduated within the past two years and have 0–2 years of professional work experience.

Responsibilities

• Design, develop, test, deploy, maintain and improve software for our semiconductor manufacturing equipment
• Developing for Windows and Windows Real-time Operating Systems
• Troubleshoot and resolve computer software issues, including real-time software control systems
• Able to triage mechanical, electrical and software bugs
• Responsible to manage escalation calls with field support engineers and customers at a national and global level
• Work with QA / Support team to add replicated bugs to regression
• Author, revise, and review system specifications, software designs, test plans, and other software documentation.
• Investigate both internal and external inquiries, questions and problem reports. Offer problem analysis, solutions, or alternatives as a result of these investigations.
• Evaluate software engineering tools.
• Participate in system design teams.
• Travel to customer sites to support installations, training, and troubleshooting of ASM products.
• Develop schedules for software development efforts.
• Provide engineering solutions to resolve all software issues
• Evaluating new software and hardware tools for possible department use

Minimum Qualifications

• Strong software development skills in C++ 
• 1+ years’ experience as a generalist or mid-stack software development with a Bachelor's degree OR recently graduated with Masters degree in Computer Science, Computer Engineering or Computer Systems
• Graduating in Fall 2025 or graduated within the past two years
• 0–2 years of professional work experience

Preferred Qualifications

• Strong software development skills in C++ and C#
• Educational background in Computer Science or Computer Systems
• Experience working with multiple items listed below
  • Software for Machine Control (including Semiconductor equipment) 
  • Developing for Windows and Windows Real-time Operating Systems
  • Multi-threaded applications
  • Real-time software
  • Graphical User Interfaces
  • Device drivers or other interrupt driven software preferred
  • Data Communications and Networking
  • Knowledge of programming tools such as text editors, debuggers, application builders and configuration management tools.
  • Ability to read code and understand the functionality implemented and the ability to translate the functionality into another piece of software
  • Comprehend software documentation including specification and design documents, communication interface specific and API description

working as part of the Global Quality team, this role will work alongside Business Unit Engineers, Product Support, Field Teams, Supplier Quality, Manufacturing, and other business functions toward the goal of resolving “non-conformance” issues that are encountered by our manufacturing & field teams and determined to be either high customer impact or systemically caused. This role also includes meeting directly with Customers as well as presenting solutions and status to both customers and various levels of ASM management.

Responsibilities:

• Act as Single Point of Contact, on behalf of Global Quality, for given product lines
• Also act as Single Point of Contact for key customer Field Teams on quality concerns
• These responsibilities require building a fundamental understanding of the quality concern identified, determining the best solution path and driving appropriate action
• Drive, within ASM’s Toll Gate process, building in quality for New Product Introductions
• Work with BU personnel to create Critical Part definition, Design FMEAs and score progress in a Design For Quality scorecard
• Drive down Non-Conformances (NCs) for given product lines & customers
• Through NC data analytics, identify trends, systemic issues, repeat issues, their causes and drive team solutions
• Work with other members of the Quality teams and management to roll out efficiency and continuous improvement efforts
• Working with cross-functional teams, institute solutions focused on permanently solving root cause and preventing similar occurrences
• Communicate solutions & experiences with colleagues to solve common issues existing across multiple products

Qualification:

• Bachelor’s degree, Master’s preferred, in Mechanical, Electrical or Material Science Eng;  PhD is a plus
• 7-10 years of experience in semiconductor, or similar technical industry, in engineering role with a strong focus on quality
• Experience with Structured Problem Solving (e.g. 8D, C4, A3 etc.) and FMEA
• Experience with Project Management
• Experience with Quality Management Systems, Quality Assurance and Process Control; part fabrication experience is a plus
• Six Sigma Green Belt; Black Belt is a plus
• Ability to build organizational awareness and collaborate in a global setting is required
• Ability to influence, persuade, and position the value-building quality within products
• Strong analytical skills with the ability to use logic and data to make factual assessments
• Ability to drive or oversee issues to full resolution