** This position is not eligible for visa sponsorship for external candidates. Candidates cannot require sponsorship now or in the future**

Job’s mission

Our Global Sales, Services & Spares IQ and Sustaining teams are seeking Snr Engineers I & II, Field Service (level will depend on experience, degree and responsibilities. Please review below) to join ASM at a customer site (TSMC) in North Valley, AZ. Domestic and International travel of at least 75% will be required for this role. As a Senior Field Service Engineer at ASM, you’ll play a critical role in supporting the advanced semiconductor equipment that powers the world’s most transformative technologies. You’ll take the lead on complex troubleshooting, guide and mentor engineers, and strengthen our partnerships by helping customers achieve stable, high‑performance fabrication environments. Your expertise will make a direct impact on tool reliability, customer satisfaction, and the next generation of ASM technology.

What you will be working on

Senior Engineer I, Field Service

• Install, maintain, and repair ASM semiconductor equipment with minimal supervision
  • Lead troubleshooting of complex tool or process issues using structured diagnostic methods
  • Perform root‑cause analysis and recommend targeted, data‑driven corrective actions
  • Review tool‑performance data to identify trends, risks, or improvement opportunities
  • Provide technical guidance and on‑the‑job coaching to less‑experienced engineers
  • Document service activities and support updates to procedures and best practices
  • Communicate solutions, progress, and expectations clearly with customer engineers
  • Participate in escalations alongside cross‑functional ASM engineering teams

Senior Engineer II, Field Service

• Serve as the senior technical lead for equipment installation, performance optimization, and recovery
• Diagnose and resolve highly complex, multi‑factor tool and process issues with limited guidance
• Lead advanced root‑cause analysis and drive long‑term corrective‑action plans that influence global engineering improvements
•  Own the customer‑technical relationship: build trust, anticipate operational needs, and act as ASM’s senior technical representative onsite
• Manage escalations end‑to‑end, aligning expectations, coordinating cross‑functional teams, and communicating clear action plans
• Guide, mentor, and develop engineers through hands‑on instruction, structured training, and knowledge‑sharing
• Champion best practices and contribute to procedure development, improvements, and field‑wide learning
•  Provide detailed field insights to R&D, product, and design teams, including support for beta tools or early‑option deployments

What we are looking for

Senior Engineer I, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 6+ years of experience, OR a Master’s degree with 4+ years of experience OR PhD degree with 0+ years of experience.
• Experience of semiconductor field service or capital‑equipment experience
• Ability to interpret electronic and electromechanical schematics
•  Experience with structured troubleshooting methodologies
• Knowledge of cleanroom and semiconductor safety protocols
• Strong written and verbal communication skills
• Ability to work independently and collaboratively in fast‑paced fab environments
• Willingness to travel domestically and internationally as needed for the role. 
• Proficiency in MS Office

Senior Engineer II, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 8+ years of experience, OR a Master’s degree with 6+ years of experience OR PhD degree with 4+ years of experience.
• Experience in semiconductor field service experience with demonstrated technical leadership
• Advanced knowledge of tool architecture, control algorithms, and multi‑factor troubleshooting
• Experience driving structured root‑cause analysis and long‑term corrective‑action plans
• Proven ability to lead escalations and manage customer‑technical relationships
• Strong communication and mentorship capabilities
• Ability to work autonomously while guiding and developing other engineers
• Willingness to travel domestically and internationally as needed for the role
• Proficiency in MS Office

What sets you apart

Senior Engineer I, Field Service

• Experience supporting beta tools or early‑option equipment
• Knowledge of wafer‑fab operations, robotics, vacuum systems, plasma, RF, or gas handling
• Experience writing or updating procedures or technical documentation
• Strong customer‑service approach and organizational skills
• Familiarity with structured problem‑solving methods

Senior Engineer II, Field Service

• Demonstrated leadership in complex troubleshooting programs or technical initiatives
• Experience owning customer‑technical relationships, including expectations and long‑term partnership building
• Strong capability in mentoring and developing field engineers
• Hands‑on expertise with fab robotics, vacuum systems, plasma, RF, or gas‑delivery systems
• Experience providing structured feedback to engineering or product teams
• Experience evaluating or supporting beta‑stage or early‑option tools

** This position is not eligible for visa sponsorship for external candidates. Candidates cannot require sponsorship now or in the future**

As a Field Service Engineer – Early Career, you’ll take on a hands-on role supporting ASM’s advanced semiconductor equipment and helping our customers keep their fabs running at peak performance. You’ll build real-world expertise through structured training, mentorship, and on-the-job learning while working directly with technologies that power AI, 5G, cloud computing, and next‑generation devices. This is your chance to apply your engineering background, strengthen your technical capabilities, and join a team that’s shaping the future of semiconductor innovation.

In this role, based in North-Valley/Phoenix, AZ at our customer site, you’ll launch your engineering career at the center of cutting‑edge semiconductor manufacturing. It’s an ideal opportunity for early‑career engineers who want to put their education into practice in a high‑tech environment where every day brings something new to learn.

From your first day, you’ll receive training through hands‑on guidance from seasoned engineers onsite. You’ll work with vacuum systems, plasma, chemical delivery, robotics, sensors, advanced metrology, and complex hardware‑software interactions. Your contributions will have a direct impact on tool performance, system uptime, and customer success—playing a meaningful role in enabling leading‑edge logic technology nodes. This experience lays a strong foundation for rapid growth, technical mastery, and a variety of long‑term career paths within ASM.

Shifts available:

Mon-Fri- 8am-5pm (subjected to OT)

What You Will Be Working On 

• Support installation, maintenance, and repair of ASM semiconductor equipment at customer sites 
• Troubleshoot equipment and process issues with guidance from senior engineers 
• Deliver clear, timely, customer‑focused support with a strong safety mindset 
• Working in cleanroom environments while following strict safety and quality standards.
• Assist in identifying and contributing to continuous improvement efforts  
• Participate in customer escalations alongside experienced team members 

What We Are Looking For 

• Bachelor’s or master’s degree in Electromechanical Engineering, Electrical Engineering, Mechanical Engineering, or related field 
• Candidates who are hands-on and mechanically curious, energized by complex systems and real-world problem solving, Comfortable working in fast paced, hightech environments & motivated to build a long-term engineering career. 
• Internship, co‑op, senior design project, lab research, or hands‑on technical experience 
• Ability to read and interpret basic electronic and electromechanical schematics 
• Understanding of safety protocols and willingness to work in cleanroom environments 
• Strong problem‑solving mindset and eagerness to learn 
• Clear communication skills and a strong customer-service mindset 
• Ability to work independently and collaboratively 
• Willingness to travel domestically and internationally 
• Proficiency with Microsoft Office 

What Sets You Apart 

• Demonstrated commitment to safety, quality, and disciplined execution 
• Exposure to semiconductor processes, wafer fabs, robotics, vacuum systems, plasma, or gas handling 
• Experience writing technical documentation in school or project settings 
• Familiarity with customer‑facing or support roles (internships, tutoring, help desk, teamwork) 
• Interest in structured problem‑solving methods, statistical methods, data analysis. 
• Curiosity and learning orientation when working with advanced semiconductor technologies 
• Participation in engineering clubs, competitions, or technical student groups 

Why join ASM? 

2026 is the year to join ASM as a Field Service Engineer. Apply now! 

Job's Mission:

As a Software Quality Assurance Engineer at ASM, you will ensure the reliability and effectiveness of our software that drives cutting-edge semiconductor processing equipment. You’ll work on testing and qualifying software, streamlining QA processes to align with CI/CD development, and collaborating with talented global teams. Your contributions will directly impact the functionality and performance of advanced hardware in the semiconductor industry.

What you will be working on:

• Design, develop, test, deploy, maintain, document, and improve software test suites.
• Perform both manual and automated testing in simulation environments and on physical semiconductor manufacturing equipment.
• Execute and analyze the functionality of engineering designs compared to intended outcomes, providing valuable feedback.
• Automate, streamline, and maintain QA processes to integrate seamlessly with CI/CD development workflows.
• Develop and implement quality standards, methods, and procedures to enhance existing business processes.
• Work closely with Process Engineering teams to test systems, validate engineering designs, and identify quality improvements.
• Create and manage tests plans and test cases, ensuring thorough validation of software enhancements and defect fixes.
• Gain an understanding of ASM system operations, including mechanical, electrical, and software functionality.
• Document testing procedures and feedback to ensure quality and consistency across projects.

What we are looking for:

• Bachelor’s + 5 years of experience, Master's +3 years OR PhD + 2 years of experience. Degree in Computer Science, Computer Engineering, or a related field.
• Proficiency in programming languages such as Python, C++, or C#.
• Experience with system quality assurance or engineering for complex electromechanical equipment with integrated software controls.
• Strong written and verbal communication skills for interacting with senior leadership and stakeholders.
• Willingness to travel up to 10% of the time.

What sets you apart

• Familiarity with tools like Jira, Confluence, Git, Test Complete, or TestRail.
• Experience in software configuration management or versioning in a software development environment.
• Knowledge of DevOps and CI/CD pipeline setup.

We are seeking an experienced QA/QC Program Manager to lead quality assurance and quality control operations supporting semiconductor facility construction, commissioning, and qualification projects. This role is responsible for developing and implementing comprehensive QA/QC programs, managing a team of inspectors, and ensuring all process mechanical installations meet rigorous industry and project-specific quality standards. The ideal candidate brings deep expertise in semiconductor utility systems, a collaborative leadership style, a safety mindset, and a commitment to building strong relationships with their team and project stakeholders.

Responsibilities:

QA/QC Program Development & Oversight

• Develop, implement, and continuously improve project-specific QA/QC plans, policies, procedures, and inspection checklists aligned with owner specifications and industry standards.
• Establish quality benchmarks, acceptance criteria, and performance metrics for all construction and commissioning activities.
• Manage document control processes for quality records including inspection reports, non-conformance reports (NCRs), corrective action requests (CARs), and recorded issues.
• Lead root cause analysis investigations and drive corrective and preventive action (CAPA) implementation.
• Conduct regular program audits to verify compliance with project quality requirements and regulatory standards.

Team Leadership & People Development

• Recruit, onboard, mentor, and manage a team of QA/QC inspectors across multiple project sites.
• Establish clear expectations, provide regular performance feedback, and create professional development plans for each team member.
• Foster a culture of accountability, continuous learning, continuous improvement and open communication within the QA/QC team.
• Maintain consistent and meaningful contact with employees through regular one-on-ones, team meetings, and site visits.
• Advocate for team resources, training, and career growth opportunities with senior leadership.

Process Mechanical Quality Assurance

• Oversee QA/QC activities for process mechanical installations including piping, welding, pressure testing, and system integration.
• Ensure compliance with applicable codes, standards, and specifications (ASME, SEMI, AWS, and project-specific requirements).
• Review and approve Inspection and Test Plans (ITPs), project quality related specifications, welding procedure specifications (WPS), and procedure qualification records (PQR).

System Qualification & Commissioning Support

• Provide quality oversight during qualification and commissioning of the following semiconductor facility systems:
• Bulk Gas Systems — piping purity testing & qualification, compliance, and system certification.
• Specialty (Spec) Gas Systems — piping purity testing & qualification, compliance, and system certification.
• Process Waste Systems — chemical drain, exhaust, and waste treatment system verification.
• Mechanical Piping — utility piping installation quality and testing.
• Analytical Testing — development of associated quality programs, oversight of purity qualification testing.
• Coordinate reviews of turnover documentation for system handoff.

Stakeholder Coordination & Communication

• Serve as the primary quality point of contact for associated system owners.
• Participate in project planning meetings, schedule reviews, and progress reporting to ensure quality milestones are tracked and met.
• Build and maintain strong working relationships with all project stakeholders through proactive, transparent communication.

• Any other duties or responsibilities that may be assigned to you in your role. 

Skills Required:

• Minimum of 8–10 years of progressive QA/QC experience in semiconductor, pharmaceutical, or high-purity industrial construction environments.
• Proven track record of developing and implementing QA/QC plans, policies, and procedures from program inception through project closeout.
• Demonstrated experience managing, coaching, and developing a team of QA/QC inspectors across multiple concurrent projects or sites.
• Strong working knowledge of process mechanical installations and associated quality specifications, codes, and standards.
• Direct experience with qualification and commissioning of bulk gas, specialty gas, process waste, mechanical piping, Ultra Pure Water and analytical testing systems in semiconductor facilities.
• Proficiency in quality management software, document control systems, and Microsoft Office Suite.

Preferred:

• Working knowledge of SEMI standards, ASME B31.3, and AWS D18.1/D18.2.
• Experience with semiconductor facility construction for leading chip manufacturers (e.g., Intel, TSMC, Samsung, Micron).
• Familiarity with commissioning management platforms and digital quality tools.

Education / Licenses / Certifications:

• Bachelor’s degree in Engineering, Construction Management, Quality Management, or a related field
• Professional certifications such as ASQ Certified Quality Manager (CQM), Certified Quality Engineer (CQE), or equivalent.
• OSHA 30-Hour Construction Safety certification.
• Proof of education, licenses, and certifications will be required where applicable

Benefits:

• Medical, Dental and Vision Insurance 
• Life, Short-Term, Long-Term Disability Insurance 
• Training and Education Assistance 
• 401k Retirement Plan 
• Extra Annual Leave with Years of Service 
• Maternity/Paternity Leave 
• Recognition Rewards
  
  #LI-DNP
  
  

This role is responsible for leading electrical commissioning efforts within complex construction and mission-critical environments. The position works closely with multidisciplinary teams including engineering, construction, and controls to ensure systems are delivered safely, efficiently, and in accordance with project requirements. The individual will play a key role in driving system readiness, performance, and successful project turnover.

Responsibilities:

• Lead electrical commissioning activities across all project phases, from design review through energization, testing, and final handover.
• Review electrical designs, one-line diagrams, specifications, and control schematics to ensure systems are commissionable and aligned with project requirements.
• Plan and coordinate installation verification, pre-functional checks, energization, and functional testing for electrical systems.
• Oversee QA/QC walkdowns to confirm installation quality and readiness for commissioning.
• Lead and manage safe energization of electrical systems including switchgear, transformers, UPS, and distribution networks.
• Coordinate closely with mechanical, controls/BMS, and construction teams to ensure system integration and readiness.
• Develop and manage electrical commissioning procedures, checklists, and test scripts.
• Identify, track, and drive resolution of commissioning issues through to closure.
• Utilize commissioning tools and platforms to monitor system status, readiness, and progress against project schedules.
• Lead commissioning meetings and provide clear reporting on electrical system readiness, risks, and progress.
• Ensure all electrical systems meet design intent, safety requirements, and client performance expectations prior to handover.
• Support system turnover including documentation completion, as-built verification, and client handover requirements.
• Provide technical leadership, guidance, and mentorship to commissioning engineers and technicians.
• Promote and enforce a strong safety culture, including strict adherence to LOTO, arc flash, and energization procedures.
• Any other duties or responsibilities that may be assigned to you in your role.

Skills Required:

• Strong knowledge of electrical power systems including switchgear, transformers, UPS, and distribution systems.
• Proven experience leading commissioning activities within mission-critical or large-scale construction environments.
• Ability to review and interpret electrical drawings, one-lines, and control schematics.
• Strong understanding of commissioning processes including pre-functional, functional, and integrated testing.
• Experience managing energization procedures and working in high-risk electrical environments.
• Proficiency with commissioning tools and platforms for tracking system readiness and issue resolution.
• Excellent leadership, communication, and stakeholder coordination skills.
• Strong problem-solving skills with the ability to drive issues through to resolution.
• High attention to detail with strong documentation and reporting capabilities.
• Commitment to safety, quality, and compliance with industry standards.

Education / Licenses / Certifications:

• Bachelor’s degree in Electrical Engineering or related field preferred.
• OSHA 10 or OSHA 30 certification preferred.
• NETA certification preferred.
• Professional Engineer (PE) license preferred.
• Proof of education, licenses, and certifications will be required where applicable.

Benefits:

• Medical, Dental and Vision Insurance 
• Life, Short-Term, Long-Term Disability Insurance 
• Training and Education Assistance 
• 401k Retirement Plan 
• Extra Annual Leave with Years of Service 
• Maternity/Paternity Leave 
• Recognition Rewards
  

#INDHP

Job Title: Project Engineer

Company: Loenbro, LLC
Business Unit/Department: Engineering                                           
Location: Arizona
Reports to:  Senior Project Manager
Employment Type: Full-Time
FLSA Classification: Exempt

About Loenbro

Loenbro is a trusted, long-term construction lifecycle partner to thousands of customers across the U.S. Our market spans all industries and our service offerings include Critical Electrical, Mechanical & Structural, Soft Crafts, Inspection, Underground Maintenance and Installation, and Fabrication. Our expertise lies in simplifying the complex and establishing long-standing relationships with our partners. We have a national presence but a local approach—every customer benefits from our capabilities and our care.

At Loenbro, we don’t just offer jobs—we build careers grounded in integrity, teamwork, excellence, and purpose. Join a team where your expertise is valued, your growth is supported, and your work helps maintain and enhance the critical infrastructure that powers communities across the nation.

Job Summary
Loenbro is currently looking for a Project Engineer to join the team. You will be a key member of our project management team, responsible for overseeing and managing the technical aspects of mission-critical and data center projects. Your expertise in electrical engineering and project management will contribute to the successful execution of projects.

Essential Job Responsibilities

• Project Planning: Collaborate with Project Managers to develop project plans, including scope, schedule, and budget.
• Technical Expertise: Utilize your electrical engineering knowledge to design, review, and ensure the proper installation of electrical systems, adhering to industry standards and best practices.
• Documentation: Create and maintain accurate project documentation, including technical drawings, specifications, and reports.
• Coordination: Coordinate with project teams, contractors, and subcontractors to ensure the smooth execution of projects.
• Quality Assurance: Conduct inspections and quality control checks to ensure that all work meets safety regulations and quality standards.
• Problem Solving: Address technical challenges and issues as they arise during the project, proposing effective solutions.
• Client Interaction: Interact with clients to understand their technical requirements and provide technical support and expertise as needed.

Other duties may be assigned as needed to support business operations.

Minimum Qualifications

Required:

• 1-3 years of experience as a project engineer, preferably in the electrical construction industry or bachelor’s degree in electrical engineering or a related field (preferred).
• Strong technical knowledge of electrical systems and engineering principles.
• Proficiency in AutoCAD or other design software.
• Excellent communication and interpersonal skills.
• Ability to work independently and as part of a team.
• Strong problem-solving and decision-making abilities.
• Commitment to safety and quality.

Physical Demands and Work Environment

The physical demands and work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

Work Environment:

• Indoor office setting with controlled temperature.
• Outdoor industrial sites with exposure to noise, dust, chemicals, extreme weather, uneven terrain, or other environmental factors.
• Fabrication shops with exposure to noise, dust, chemicals, or other environmental factors.

This role requires compliance with all applicable safety regulations, personal protective equipment (PPE) requirements, and Loenbro's Environmental Health and Safety (EH&S) policies.

Benefits

Loenbro offers a competitive salary, comprehensive benefits package, and rewards to those who join our team:

• Medical, dental, and vision insurance
• 401(k) retirement plan with company match
• Paid time off (PTO) and holiday pay
• Life and disability insurance
• Professional development and training opportunities
• Employee assistance program (EAP)

Benefits eligibility may vary based on employment classification and hours worked.

Guided by Core Values (LEAD), grounded in grit and a commitment to excellence, Loenbro betters our families, customers, and local communities.  If you’re ready to be part of a company that LEADS by:

• Living with Integrity
• Exceeding Expectations
• Acting with Urgency
• Delivering Excellence

…we want to hear from you.

Loenbro is an Equal Opportunity Employer

Project Engineer - Mining 

Company: Loenbro, LLC                                                                             
Location: TBD
Employment Type: Full-Time

Job Summary:
Loenbro Southwest is seeking a Mining Project Engineer who will be responsible for supporting the Project Manager and other project participants as needed by ensuring the success of a project through the technical accuracy of all project aspects.

About Loenbro

Loenbro is a trusted, long-term construction lifecycle partner to thousands of customers across the U.S. Our service offerings include Critical Electrical, Mechanical & Structural, Soft Crafts, Inspection, Underground Maintenance and Installation, and Fabrication, and our vertical market focus spans all industries. Our expertise lies in simplifying the complex, so that our clients gain clarity and control in construction and maintenance. We do this by taking full ownership on every interaction, delivering multi-scope project excellence, and establishing long-standing relationships with our partners as we enhance and maintain your critical infrastructure. We have a national presence but a local approach—so that every customer benefits from our capabilities and our care. Through their relationship with us and the One Loenbro model, our customers are able to simplify, control, and succeed in the everyday.

Essential Job Responsibilities

•    Cooperating and communicating with the Project Manager and other project participants and collaborating with all team members to create more efficient project methods and to maintain the project's profitability.
•    For Projects that require Engineering, coordinate with the Preconstruction Group to attain the Engineering required.
•    Coordinate field test methods and methods for monitoring the quality of those tests based on project requirements and internal quality guidelines.
•    Maintain and organize all construction documentation including but not limited to contract drawings, fabrication drawings, specifications, change order documents, quality, and closeout documentation within the appropriate Procore tools and as outlined in the project requirements.
•    Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.
•    Gather and prepare data for submittal or transmittal to the customer, vendors, subcontractors, governmental agencies, and internal use.
•    Coordinate with Third Party Detailing Service for submittal or transmittal to the customer, vendors, subcontractors, governmental agencies, and internal use.
•    Coordinate field surveying, dimension, and field verification with Superintendent or subcontractor including elevation, control points, and compilation of as-built data.
•    Perform material take offs from drawings, specifications, and other contract documents.
•    Prepare purchase requisitions for required project materials and monitor delivery status in support of construction schedule, construction budget, and project specifications.
•    Provide all project administration and correspondence functions including permitting, bonding, and requests for information (RFIs).
•    Assist PM in the development of SSHEP’s and setting up Project Kick Off Meetings.
•    Assist PM in the development of Subcontract Agreements.
•    Assist PM with the development of the Schedule of Values for billing. 
•    Assist PM with the development of Estimates.
•    Coordinate with other Divisions on estimates.
•    Assist PM with Job Walks to ensure quality estimates are developed.
•    Ensure project estimate is compliant with Loenbro standards.
•    Assist PM to develop and maintain the Project schedule. MS Project experience is a must.
•    Integrate Estimate and Projects according to the latest Procore procedures.
•    Assist PM and Superintendent with Daily Planning.
•    Ensure the development of claiming schemes are set up and Quantity Tracking is performed on all Projects.
•    Update Estimate and Projects with change orders according to the PM.
•    Attend site meetings as needed.

Additional Responsibilities:
•    Performs other related duties as assigned.

Minimum Qualifications

Required:

•    Excellent verbal and written communication skills.
•    Excellent interpersonal and customer service skills.
•    Excellent organizational skills and attention to detail.
•    Excellent time management skills with a proven ability to meet deadlines.
•    Strong analytical and problem-solving skills.
•    Strong supervisory and leadership skills.
•    Ability to prioritize tasks and to delegate them when appropriate.
•    Ability to function well in a high-paced and at times stressful environment.
•    Proficient with Microsoft Office Suite or related software.
•    Proficient with Microsoft Project software.
•    Mining and Open Pit Experience Necessary
•    MSHA Related Compliance Knowledge.
•    Diverse Background knowledge in Fabrication, Steel Erection, Piping, Mechanical, Equipment Setting, Concrete, Civil, and Electrical preferred. At least 50% of Expectations is a must.
•    Understands Mining Equipment such as Crushers, Mills, Flotation Equipment, Moly Plants, Thickener Tanks, Smelters, Acid Plants, Process Equipment, Piping- Carbine-Stainless Steel- HDPE- PVC/CPVC, and SX Plants. 
 
Education and Experience:
Bachelor’s degree in engineering or a similar field
Mining/ MSHA Experience- 2-3 years or more

Physical Demands and Work Environment

The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

Work Environment:

• Indoor office setting with controlled temperature.
• Outdoor industrial sites with exposure to weather extremes.
• Potential exposure to noise, dust, chemicals, or other environmental factors.
• Travel requirements: up to 10% of time.

This role requires compliance with all applicable safety regulations, personal protective equipment (PPE) requirements, and Loenbro's Environmental Health and Safety (EH&S) policies.

Benefits

Loenbro offers a competitive salary, comprehensive benefits package, and rewards to those who join our team:

• Medical, dental, and vision insurance
• 401(k) retirement plan with company match
• Paid time off (PTO) and holiday pay
• Life and disability insurance
• Professional development and training opportunities
• Employee assistance program (EAP)

Benefits eligibility may vary based on employment classification and hours worked.

Our Core Values

LEAD with Values:

• Live with Integrity – We do the right thing and do what we say, in every Interaction - and practice stewardship to car for the communities where we live & work.
• Exceed Expectations – We anticipate customer needs, deliver Innovative solutions, and dedicate ourselves to creating outcomes that make a real difference.
• Act with Urgency – We take action, adapt seamlessly, and keep projects moving without compromising quality - because our customers priorities are our priorities.
• Deliver Excellence – We combine our passion for quality, our Industry expertise, and our eye for Innovation to make excellence our standard.

Guided by core values, grounded in grit and a commitment to excellence, Loenbro maintains and enhances the industrial infrastructure that betters our families, customers, and local communities.

Loenbro is an Equal Opportunity Employer.

Senior Engineer I, Software Engineering

As part of ASM’s Software Engineering team, you’ll develop advanced control software that drives the most sophisticated semiconductor equipment in the world. Your work will directly impact robotics, gas flow systems, and temperature control hardware—delivering real-time results in chip manufacturing. Based in Phoenix, you’ll collaborate globally and help shape the future of semiconductor automation and factory integration.

Responsibilities:

• Design, develop, test, deploy, and maintain software for semiconductor manufacturing equipment
• Build software for Windows and real-time operating systems
• Troubleshoot and resolve issues in real-time control systems
• Triage mechanical, electrical, and software bugs
• Lead escalation calls with field engineers and global customers
• Collaborate with QA and Support teams to manage regression testing
• Author and review system specifications, software designs, and test plans
• Investigate internal and external problem reports and propose solutions
• Evaluate and recommend software engineering tools
• Participate in system design and scheduling efforts
• Integrate and support factory automation protocols such as SECS/GEM
• Work closely with automation teams to ensure seamless equipment-factory communication

Requirements:

• BS Degree in Computer Science or related field. MS preferred.
• Strong software development skills in C#
• 5+ years’ experience as a generalist or mid-stack software developer
• Experience in the semiconductor industry
• Hands-on experience with factory automation systems
• Familiarity with SECS/GEM, GEM300, EDA/Interface A protocols
• Experience with AMHS (Automated Material Handling Systems)

What sets you apart

• 10+ years in software development and architecture
• Experience with:
  • Machine control software (especially for semiconductor equipment)
  • Windows and real-time operating systems
  • Multi-threaded and real-time applications
  • GUI development and device drivers
  • Networking, data communications, and EtherCAT
  • Dynamic scheduling algorithms with deadlock avoidance

Senior Engineer I, Software Engineering - Factory Automation 

As part of ASM’s Software Engineering team, you’ll develop advanced control software that drives the most sophisticated semiconductor equipment in the world. Your work will directly impact robotics, gas flow systems, and temperature control hardware—delivering real-time results in chip manufacturing. Based in Phoenix, you’ll collaborate globally and help shape the future of semiconductor automation and factory integration.

Responsibilities:

• Design, develop, test, deploy, and maintain software for semiconductor manufacturing equipment
• Build software for Windows and real-time operating systems
• Troubleshoot and resolve issues in real-time control systems
• Triage mechanical, electrical, and software bugs
• Lead escalation calls with field engineers and global customers
• Collaborate with QA and Support teams to manage regression testing
• Author and review system specifications, software designs, and test plans
• Investigate internal and external problem reports and propose solutions
• Evaluate and recommend software engineering tools
• Participate in system design and scheduling efforts
• Integrate and support factory automation protocols such as SECS/GEM
• Work closely with automation teams to ensure seamless equipment-factory communication

Requirements:

• BS Degree in Computer Science or related field. MS preferred.
• Strong software development skills in C#
• 5+ years’ experience as a generalist or mid-stack software developer
• Experience in the semiconductor industry
• Hands-on experience with factory automation systems
• Familiarity with SECS/GEM, GEM300, EDA/Interface A protocols
• Experience with AMHS (Automated Material Handling Systems)

What sets you apart

• 10+ years in software development and architecture
• Experience with:
  • Machine control software (especially for semiconductor equipment)
  • Windows and real-time operating systems
  • Multi-threaded and real-time applications
  • GUI development and device drivers
  • Networking, data communications, and EtherCAT
  • Dynamic scheduling algorithms with deadlock avoidance

Engineer, Software Support

At ASM, our Software Engineering teams works on delivering software that has immediate, tangible results visible in the operation of semiconductor processing equipment hardware. The hardware includes robotics, gas valves, temperature controllers and other hardware.  

As a Software Support Engineer, you will make an impact by investigating, recreating, and troubleshooting software issues to resolution as reported by our customers. 

Responsibilities:

• Gather information to investigate the issue, reproduce it, determine the root cause, and recommend corrective actions. 
• Troubleshoot and resolve software issues, including embedded software for control systems.  Able to triage mechanical, electrical, and software bugs. 
• Responsible for managing escalation calls with field support engineers 
• Create bug reports for the developer to use when fixing the bug. 
• Work with QA to add replicated bugs to the regression. 
• Travel to customer sites to support installations, training, and troubleshooting of ASM products. 
• Talking to the account team and GPS group (not directly with the customer) when investigating reported issues. 
• The team will handle all issues until they are ready to send to the developer.  

Minimum Qualifications 

• BS+ 4 years experience or MS+ in Computer Science, Computer Engineering, or a related field. 
• Ability to read code and diagnose issues.  
• Software development or test (QA) experience. 
• Ability to travel 10-25% domestic and international.

Preferred Qualifications 

• Preferred expertise in C/C++, C#, Python, Gitlab/Github.
• Experience with semiconductor equipment preferred 
• Experience working with two or more of the following is preferred: software for machine control, Semiconductor Factory Automation, Multi-threaded applications, real-time software, device drivers, or other interrupt-driven software 

Senior Engineer, Software Support

At ASM, our Software Engineering teams works on delivering software that has immediate, tangible results visible in the operation of semiconductor processing equipment hardware. The hardware includes robotics, gas valves, temperature controllers and other hardware.  

As a Senior Software Support Engineer, you will make an impact by investigating, recreating, and troubleshooting software issues to resolution as reported by our customers. 

Responsibilities:

• Gather information to investigate the issue, reproduce it, determine the root cause, and recommend corrective actions. 
• Troubleshoot and resolve software issues, including embedded software for control systems.  Able to triage mechanical, electrical, and software bugs. 
• Responsible for managing escalation calls with field support engineers 
• Create bug reports for the developer to use when fixing the bug. 
• Work with QA to add replicated bugs to the regression. 
• Travel to customer sites to support installations, training, and troubleshooting of ASM products. 
• Talking to the account team and GPS group (not directly with the customer) when investigating reported issues. 
• The team will handle all issues until they are ready to send to the developer.  

Minimum Qualifications 

• BS+ 8 years or MS+ 4 years in Computer Science, Computer Engineering, or a related field. 
• Ability to read code and diagnose issues.  
• Software development or test (QA) experience. 
• Ability to travel 10-25% domestic and international.

Preferred Qualifications 

• Preferred expertise in C/C++, C#, Python, Gitlab/Github.
• Experience with semiconductor equipment preferred 
• Experience working with two or more of the following is preferred: software for machine control, Semiconductor Factory Automation, Multi-threaded applications, real-time software, device drivers, or other interrupt-driven software 

The Maneuver Dominance team at Anduril develops operationally relevant, multi-asset autonomy. We are focused on building the next generation of autonomous capabilities by leveraging existing Anduril platforms like Ghost or Altius, bringing 3rd party platforms into Anduril's Lattice ecosystem, and developing breakthrough systems that will shape the future of the battlefield. If you are interested in working in an extremely innovative and fast paced environment, where your work directly makes an impact and difference in the products that are fielded this a fantastic opportunity.

As an Aviation Maintenance Engineer you will ensure the airworthiness and mission readiness of developmental UAS platforms across assembly, maintenance, and flight test operations. You will work alongside a team of engineers, test pilots, and test specialists, contributing hands-on mechanical expertise to aircraft assessment, maintenance coordination, and reporting on all facets of aircraft readiness. This role is central to enabling safe and efficient developmental flight test under both civil and military approval frameworks.

What You'll Do

• Assist with many aspects of aircraft assembly, planned and preventative maintenance, and operation including mechanical integration (flight control surfaces, propulsion), composites fabrication, and avionics build/integration/test.
• Troubleshoot, repair, and maintain aircraft and subsystems including landing gear, fuel system, flight control, and propulsion.
• Perform common airframe construction techniques.
• Complete aircraft and equipment documentation.
• Troubleshoot, repair, and maintain site support equipment.
• Communicate mechanical assessment with engineering and production.
• Perform validation and testing of various electronic components using equipment such as multimeters, oscilloscopes, network analyzers, and test racks.
• Perform proper FOD and tool control practices.

Required Qualifications

• 5+ years rotorcraft experience.
• Valid FAA Airframe & Powerplant (A&P) license.
• Excellent communication and teamwork abilities.
• Proficient with computer use (standard browser, word processing applications).
• Willing to be multi-capable, including some electronics troubleshooting and repair.
• Strong problem-solving skills and attention to detail.
• Ability to rapidly change roles/responsibilities while working in a fast paced, challenging work environment.
• Willing to travel international and domestic on an as needed basis.

Preferred Qualifications

• US security clearance eligible.
• Experience with both electric and turbine power plants.

job purpose:

fairlife operates two large low acid aseptic bottling facilities in Coopersville, MI and Goodyear, AZ as well as a smaller filtrated products manufacturing site in Dexter, NM. A third large plant is currently being commissioned in Webster, NY. The technical team also supports the fairlife Canada plant in Peterborough, ON.

The Utilities & Mechanical Engineer is responsible for providing specialized technical oversight, and leading projects through design, construction and operation for all plant utilities systems, ensuring the assigned plants are not stopped due to insufficient utility capacity, reliability or incorrect operation while implementing a utilities strategy to deliver company efficiency and sustainability goals.

Apart from technical and people skills, this position requires a strong sense of purpose and ownership in your work, urgency in dealing with issues with minimal supervision, a desire to constantly learn and above all a ‘One Team’ mind set to work through challenges.

responsibilities:

• Develop predictive demand, situation analysis tools and load management tools for utility systems based on forecasted plans for existing and new plants ensuring sufficient capacity and cost-effective operation.
• Define the standards to which all plant utilities will be designed, automated, constructed and operated under the locational quality and supply profiles negotiated with utilities suppliers while meeting all relevant Federal, State and Corporate laws, rules and regulations and sustainability goals.
• Document and clearly communicate the basis of design of all installed equipment to the plants key stakeholders.
• Provide technical support for the procurement of utilities from utility providers. A key decision maker in utilities equipment vendor selection and contract negotiation and contributor to budgeting and justification of capital projects.
• Lead construction phase and collaborate with plant & project engineering teams to ensure all project work gets performed on time and within budget including leading and supporting commissioning and validation activities, review and execution of Factory Acceptance Test and Site Acceptance Test (FAT/SAT) protocols, developing and delivering training materials.
• Technical oversight of new line/plant mechanical & utility design (mass/media balance, utilities process flow diagram, functional specifications, PID approval, HAZOP, FAT, DQ, OQ, PQ, training, ramp up etc.) and maintain up-to-date documentation.
• Solving complex processing, mechanical and utility problems following escalation from plants to improve reliability, reduce downtime, improve load management, reduce cost of ownership etc.
• Other duties as assigned.

skills/qualifications required:

• Bachelor’s degree in engineering: mechanical or chemical engineering with experience in dairy industry, or process engineering with experience in wider food industry. Advanced degrees or other professional certifications preferred but not required.
• 5+ years of progressive experience in utilities design, operations and construction within milk, brewing/beverage, and chemical processing. Direct experience with design, construction, commissioning and troubleshooting of utilities is required.
• Work experience with an engineering design and construction firm as a P. Eng is highly preferred.
• Proven track record of improving manufacturing processes through re-design and automation, and the introduction of new technologies.
• Data analysis and Process modeling in Microsoft Excel is required. Process and utility modeling using software’s such as Aspen, SuperPro or others will be a value addition.
• Demonstrated excellence in communication and presentation.
• Ability to handle ambiguity and thrive in a fast paced, entrepreneurial work environment;

food safety requirements:

• Notify management of any repairs or adjustments that are required that may affect product quality or food safety.
• Perform all duties necessary to meet Company, Customer and/or Government requirements/standards as prioritized by the Company.
• Ability to initiate action to prevent the occurrence of nonconformities relating to Food Safety and the Quality of the product, processes, quality system, or safety system.

• Comprehensive medical, dental, and vision coverage
• Supplemental health plans (hospital indemnity, accident, and critical illness insurance)
• Paid Time Off to recharge and support work-life balance
• Paid parental leave & adoption assistance (up to $10,000)
• Parental support & family care benefits, including childcare resources and lactation support
• 401(k) to support retirement planning with up to 9% in employer match
• Wellness reimbursement (up to $500 for qualified wellbeing expenses)
• Employee Assistance Program (EAP) for emotional wellbeing and work-life support
• Company-paid life insurance and short-term disability
• Employer HSA funding (for HDHP participants)
• Tuition reimbursement (up to $10,000) and student loan repayment ($200/month)
• Learning & development programs to unlock your full potential
• Rewards & recognition, matching gifts, free product, and Business Resource Groups

position location: Webster, NY, Coopersville, MI, or Goodyear, AZ

reports to: Sr Process Development Engineer

travel: Average 30%, can range from 30% - 75% based on project timelines. Minimal international travel for FATs.

Your Impact

Axon is committed to improving public safety by developing cutting-edge, innovative technologies. Known for developing the original TASER energy weapon, the Axon engineering team is tasked with continual excellence to keep the organization at the forefront of the market.

Mechanical Design Engineers at Axon have full design ownership over next generation life-saving technology from conceptualization through production, who's work is highly visible to even the most senior executives. our passionate leadership and cross-functional collaboration with product managers, electrical engineers, industrial designers, and manufacturing teams is vital to the success of the team and ensuring the safety of the general public for generations to come.

What You'll Do

Location: Scottsdale, AZ 

• Drive innovative product development from conceptualization to manufacturing
• Utilize creative problem solving skills to lead ideation of new product architectural concepts for subsystem and system level designs
• Construct and analyze high fidelity proof-of-concept prototypes
• Perform detailed mechanical analysis to ensure proper function through FEA, tolerance analysis, testing, and other exploratory means
• Collaborate regularly with both domestic and international stakeholders
• Work autonomously and collaboratively in an empowering and fast-paced environment
• Hone your engineering expertise in a dynamic learning environment focused on personal and professional development

What you bring

• Bachelor’s degree in Mechanical Engineering or equivalent experience
• L9: Minimum 12 years of product design experience in high-end consumer electronic products
• Experience providing technical leadership for teams of 2-5 mechanical engineers
• Proficiency with Creo or similar 3D CAD software
• Knowledge in the design of plastic injection molded, stamped metal, die-cast, and machined parts
• Familiarity with adhesives and bonded joint design
• Experience designing for a high level of dust/water ingress protection
• Experience designing thermal management solutions for dissipating heat from electronics
• Experience with PCB/PCBA flex circuit and other electro-mechanical integration
• Strong DFM/DFA skills, with emphasis on part/assembly tolerance management, to ensure robust designs for high volume manufacturing
• Experience collaborating with external consultants, vendors and manufacturers, including willingness to travel internationally
• Ability to interpret product requirements and translate into quantifiable engineering deliverables
• Experience preserving Industrial Design and UX intent in mechanical design implementation
• Effective communication and strong presentation skills
• Ability to balance and prioritize conflicting design constraints through analysis, testing, and creativity
• Collaboration with peers in a candid cross-functional team culture

Benefits that Benefit You

• Competitive salary, bonus, RSUs, and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• And yes, we have snacks in our offices

Benefits listed herein may vary depending on the nature of your employment and the location where you work

Job's mission

What you will be working on

What we are looking for

What sets you apart

Benefits:

• Health insurance (medical, dental, vision)
• 401(k)Retirement plan
• Paid time off (vacation, sick, flex, and holiday) & Parental Leave Benefit
• Life and disability insurance
• Employee assistance program (EAP), Family support, and parental consulting groups
• Healthcare Concierge
• Health Savings and Flexible Spending Accounts
• Lifestyle Spending Account / Fitness Reimbursement
• Fertility & Family Support Programs
• Wellness Program with medical premium discounts

As a Senior Software Engineer at ASM, you’ll sit at the intersection of cutting-edge software, complex hardware, and real-world customer impact. You’ll be a technical leader who solves the toughest software challenges in semiconductor manufacturing—driving system reliability, safety, and performance for our global customers. In this role, you won’t just fix issues—you’ll lead investigations, influence architecture, and deliver long-term, systemic improvements that power advanced semiconductor technology worldwide.

What You’ll Be Working On

• Lead deep technical investigations into software-related safety interlocks, validating corrective and preventive actions.
• Analyze and optimize multiple interacting subsystems, gaining end-to-end understanding of full platform workflows.
• Drive root cause and corrective action (RCCA) using packet captures, log correlation, and system-level analysis.
• Design and evaluate subsystem architectures, including multi-threading and scheduler interactions.
• Develop, test, deploy, maintain, and continuously improve software for advanced semiconductor manufacturing equipment.
• Troubleshoot complex software issues, including real-time control systems.
• Act as a technical escalation point—supporting field engineers and customers globally.
  Partner with QA and Support to reproduce field issues and strengthen regression coverage.
• Author and review system specifications, software designs, and test plans.
• Investigate internal and external technical inquiries, delivering clear analysis and actionable solutions.
• Evaluate and influence software engineering tools and system design decisions.
• Plan and coordinate rapid software fixes and deployments in high-impact environments.
• Present technical insights, progress, and outcomes in customer QBRs, including findings from complex DOE analyses.

What We’re Looking For

• Bachelor’s degree in Computer Science (or related field) with 7+ years of industry experience, or Master’s degree with 4+ years, or PhD with 3+ years of relevant experience
• Strong software development expertise in C++ and/or C#
• Solid understanding of multi-threaded applications
• Experience working with software documentation, specifications, and APIs
• Good knowledge of software memory architecture and debugging

What Sets You Apart

• Advanced degree (Master’s or PhD) and experience in software architecture and machine control systems, ideally within semiconductor equipment
• Hands-on experience with GUIs, device drivers, and interrupt-driven software
• Knowledge of data communications, networking, and EtherCAT
• Understanding of dynamic scheduling algorithms and deadlock avoidance
• Proficiency with development tools such as debuggers, application builders, and configuration management systems
• Ability to triage and diagnose mechanical, electrical, and software issues holistically
• Strong analytical skills, including designing and interpreting complex DOEs using multivariate methods or PCA

As a Principal Engineer, Global Product Management at ASM, you’ll have the opportunities to get involved in a wider scope of work compared to our larger competitors. While the workload is challenging, you are given the independence and autonomy to perform at your peak. This work requires being innovative, so you must have the ability to collaborate with others to deliver creative solutions, work well under pressure and pay great attention to small details.

This position is responsible for product management & technical marketing activities within the Product Management group. Every day is different, working with different customers and different products. This role is for someone who enjoys and is intellectually curious about the whole process and being part of it. You get to work external global customers that have many different needs and you will be part of the solution.  

Key Responsibilities:

• Product Life Cycle – Drive the product life cycle from concept to high volume manufacturing to obsolescence
• Roadmaps – Maintain product roadmap for a portfolio of products, periodically update roadmap through discussions with customers and internal experts, align product priorities and resources to roadmap
• Customer Engagement – Support Technical Meeting with customers, create and manage customer presentations, detailed market and competitive analysis
• MRS – Own the market requirement spec documents and ensure product development priorities align with MRS and customer needs
• Strategic Marketing – Prepare market strategies for executive R&D expenditure requests, develop roadmap and product strategy presentations for executives within ASM
• Financial – Work with finance department on NPV and IRR for products, maintain cost of ownership models
• Business Planning and Market Analysis – Attend company operation/planning meeting, create Business plan/Operation review materials, create business forecast based on market information, support budget planning, competitive analysis
• Drive teams internally to meet set products profit gross margins
• New Product Introductions – Detailed market analysis for inflections, development of business plans, internal executive alignment, positioning of products
• Support technical activities – Work with product development teams on specifications and data collection requirements, manage customer demo requests, prioritization of product development activities
• Supplier Engagement – Develop key capabilities for new products through collaboration with suppliers
• Product Promotion – Create promotional materials for conferences and launches, Sales and product support training, Introductions to Customer

Requirements:

• 10+ years of semiconductor / capital equipment industry experience, of which a significant portion has been in technical marketing and / or product management roles
• Masters or PhD in Material Science, Electrical/Chemical/Mechanical Engineering or equivalent
• Process, hardware, or device experience in semiconductors or capital equipment
• ALD or CVD experience is a plus
• High level of proficiency or deep understanding of capital equipment systems in semiconductor or similar industry
• Direct customer engagement or supplier management
• Ability to work with multiple internal disciplines on portfolio of products
• Understanding of product life cycle and technical marketing
• Ability to travel globally

** This position is not eligible for visa sponsorship. Candidates cannot require sponsorship now or in the future**

We are seeking a highly skilled Senior Mechanical Engineer with 5+ years of professional experience and a Bachelor’s degree in Mechanical Engineering to lead the design, development, and evaluation of advanced mechanical and electromechanical systems.

Key Responsibilities

• - Design complex mechanical and electromechanical subsystems and systems.
• - Develop detailed manufacturing and testing specifications and methods.
• - Evaluate mechanical systems and products using engineering principles.
• - Confirm system and product capabilities through feasibility studies and testing.
• - Drive product development by reviewing requirements and researching materials.
• - Ensure system and product quality through testing and validation.
• - Provide engineering guidance and mentor junior personnel.
• - Maintain compliance with government and industry regulations.
• - Maintain technical documentation and system data.
• - Support cross-functional engineering initiatives.

Required Skills & Qualifications

• - Strong capabilities in requirements analysis, design skills, conceptual skills, and presenting technical information.
• - Experience in Fluid Systems and Wet environments
• - Knowledge of Complex motor drive system
• - Stress Analysis of large Frame
• and other sub-systems
• - Demonstrated quality focus, technical depth, and job knowledge.
• - Bachelor’s degree in Mechanical Engineering.
• - Minimum 5 years of mechanical engineering experience.
• - Proficiency with Siemens NX, Team Center, AutoCAD, SolidWorks, and PDM systems.
• - Excellent communication and collaboration skills.
• - Strong attention to detail and analytical thinking.
• - Proven ability to work under strict deadlines.

Knowledge of Chemical Mechanical Planarization Tool would be beneficial.

** This position is not eligible for visa sponsorship. Candidates cannot require sponsorship now or in the future**

We are seeking a highly skilled Senior Mechanical Engineer with 10+ years of professional experience and a Bachelor’s degree in Mechanical Engineering to lead the design, development, and evaluation of advanced mechanical and electromechanical systems.

Key Responsibilities

• - Design complex mechanical and electromechanical subsystems and systems.
• - Develop detailed manufacturing and testing specifications and methods.
• - Evaluate mechanical systems and products using engineering principles.
• - Confirm system and product capabilities through feasibility studies and testing.
• - Drive product development by reviewing requirements and researching materials.
• - Ensure system and product quality through testing and validation.
• - Provide engineering guidance and mentor junior personnel.
• - Maintain compliance with government and industry regulations.
• - Maintain technical documentation and system data.
• - Support cross-functional engineering initiatives.

Required Skills & Qualifications

• - Strong capabilities in requirements analysis, design skills, conceptual skills, and presenting technical information.
• - Experience in Fluid Systems and Wet environments
• - Knowledge of Complex motor drive system
• - Stress Analysis of large Frame
• and other sub-systems
• - Demonstrated quality focus, technical depth, and job knowledge.
• - Bachelor’s degree in Mechanical Engineering.
• - Minimum 10 years of mechanical engineering experience.
• - Proficiency with Siemens NX, Team Center, AutoCAD, SolidWorks, and PDM systems.
• - Excellent communication and collaboration skills.
• - Strong attention to detail and analytical thinking.
• - Proven ability to work under strict deadlines.

Knowledge of Chemical Mechanical Planarization Tool would be beneficial.

What The Role Is

Reporting to the Manager of Project Engineering, the Project Engineer is responsible for managing the review, coordination, and approval of the detailed design package for Clearway Energy Group’s pipeline of solar and energy storage projects throughout the U.S. As part of the Engineering & Strategic Procurement department, the Project Engineer will also work with internal and external personnel to provide optimized designs, participate in the negotiation and execution of key contract exhibits, and support construction and commissioning activities by reviewing and approving commissioning test reports. The Project Engineer will work closely with Clearway Energy’s internal departments, including Origination, Development, Development Engineering, Construction, Procurement, Project Finance, and O&M; as well as with EPC contractors, Independent Engineers, financing parties, and other consultants, contractors, and stakeholders as needed.

This is a hybrid role based in one of our office locations in San Francisco, San Diego, Scottsdale, Houston, or Denver.

If you don’t meet 100% of the qualifications but see yourself contributing, please submit your resume.

What You'll Be Doing

• Technical lead and primary design and engineering point of contact for the Development and Construction teams, supporting intermediate- to advanced-stage development of utility-scale PV, PV+Storage, and stand-alone energy storage projects.
• Manage all resources, internally or externally, as necessary to obtain or review final site due diligence required to finalize scope, project costs, schedule, energy output, and risks with an independent EPC contractor or developer.
• Review engineering deliverables to ensure the final design meets contractual, cost, and performance requirements for our customers and financing partners.
• Develop, refine, or evaluate energy input assessments and power output expectations. Perform or oversee analyses to optimize site layouts, engineering design, and equipment selection to maximize performance and minimize lifecycle costs.
• Direct activities of designers, consultants, and contractors, and manage meetings and conference calls to achieve efficient use of resources, meet deadlines for deliverables, minimize delays, avoid crises, and resolve conflicts.
• Write, edit, and/or review technical scope of work documents, specifications, procedures, site reports, progress reports, feasibility studies, proposals, presentations, etc. Review and negotiate technical aspects of EPC contracts, interconnect agreements, etc.
• Coordinate with the Development team and external consultants to deliver energy resource predictions and production simulations, shading studies, electrical schematics, plant plans and equipment layouts, system cost estimates, EPC contracts, technical exhibits, etc.
• Review, manage, and maintain contractor deliverables during construction to meet critical contractual and financing milestones, including site, civil, structural, and electrical plans, permitting, and construction documents.
• Support construction as a technical escalation point and owner’s representative to mitigate delays and scope creep to maintain schedules and budgets.
• Represent Clearway (CEG) in interviews, meetings, and negotiations with clients, project developers, suppliers, consultants, utilities, and regulatory authorities.

What You'll Bring

• B.S. degree in mechanical, electrical, or civil engineering, or related subject.
• M.S. degree and/or P.E. desirable.
• Minimum 2+ years of solar/BESS industry experience, including 1+ year of direct EPC experience completing the detailed design, permitting, and construction of solar projects, and 1+ year of storage experience.
• Understanding solar and storage project design, optimization trade-offs, and familiarity with the current solar and storage market, equipment suppliers, contractors, typical technical specifications, and costs.
• Experience with solar and storage project financing and independent engineer requirements.
• Understanding of solar and storage energy estimates, losses, assumptions, and standards.
• Experience with review and negotiation of engineering, procurement, and construction contracts and technical exhibits for solar and storage facilities.
• Experience managing consultants and contractors.
• Working knowledge of relevant U.S. and IEC equipment standards, codes, and construction practices.
• Detail-oriented and self-motivated with the ability to perform in a dynamic and collaborative working environment.
• Ability and willingness to travel (~20%) and occasionally to work after hours on short notice, when necessary.
• Proven ability to organize and prioritize work, manage relationships with clients, colleagues, consultants, and contractors.
• Excellent written and verbal communication, mathematical abilities, analytical and creative design skills, and problem-solving skills; team-oriented with the ability to work alone when needed.

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Hybrid

Job Summary: 

The Production Engineer I will support daily manufacturing operations by optimizing production processes, improving quality and efficiency, and driving continuous improvement initiatives. This role is ideal for candidates with 1–3 years of engineering experience in a plant or production environment who are eager to apply engineering principles to real-world manufacturing challenges. The Production Engineer will collaborate with cross-functional teams to ensure production goals are met safely, cost-effectively and on schedule.

Responsibilities:

•    Monitor and analyze production line performance to identify opportunities for improvement in throughput, efficiency, and quality.
•    Conduct or assist with root cause analysis and implement corrective actions
•    Support the introduction of new products or equipment into the production line, including trials and validation.
•    Develop and maintain standard operating procedures (SOPs), work instructions, and process documentation.
•    Participate in lean manufacturing initiatives and support kaizen events to drive continuous improvement.
•    Collaborate with maintenance, quality, and safety teams to ensure smooth and safe production operations.
•    Gather and analyze production data to support decision-making and report key performance indicators (KPIs).
•    Support training efforts for operators and technicians on new processes or equipment.
•    Ensure compliance with company policies, safety standards, and regulatory requirements.

Qualifications:

• Bachelor’s degree in Mechanical Engineering, Chemical Engineering, Manufacturing Engineering, or a related field.
• 1–3 years of experience in a manufacturing, production, or plant environment (internships and co-ops included).
• Strong problem-solving skills and hands-on aptitude in a production setting.
• Familiarity with lean manufacturing tools and concepts (e.g., 5S, Kaizen, Value Stream Mapping) is a plus.
• Ability to analyze data and present findings clearly and concisely. Experienced with JMP, Minitab is a plus
• Strong communication and teamwork skills.
• Proficiency in Microsoft Office (Excel, Word, PowerPoint); experience with CAD or production management systems is a plus.
• Able to properly and regularly utilize the Personal Protective Equipment (PPE) for a period of up to 12 hours
• Must be able to perform the following over the course of up to 12 hours per day
  • Lift/push/pull up to 35 pounds on occasion.
  • Stoop, twist, bend
  • Reach overhead
  • Sit and/or stand for lengthy periods
  • Willingness to work in a fast-paced and hands-on environment.

Skills:

• Microsoft Office Suite
• Production processes
• Data analysis and processing
• Six Sigma certification * Preferred but not required
• DOE (Design of experiments) * Preferred but not required
• CAD (Computer-aided design) and coding * Preferred but not required

Job Summary: 
At LG Energy Solution Arizona, Inc., the Engineer II – Cell Quality Assurance will play a key role in improving manufacturing methods and procedures within the battery electrode production process to ensure products meet company quality specifications. Working closely with production, engineering, and quality teams, this role evaluates manufacturing processes, analyzes quality data, and implements improvements to strengthen product reliability and process consistency. The Engineer II applies quality tools such as PPAP, PFMEA, SPC, Gage R&R, calibration systems, and corrective and preventive actions to address production issues and support continuous quality improvement. Through cross-functional collaboration and data-driven analysis, this role helps ensure battery cell components meet established standards for quality, reliability, and performance.

Report To: 
Sr. Manager, Cell Quality Assurance 

Responsibilities:
• Develop and document inspection Standard Operating Procedures (SOPs) to ensure inspection reliability and verify applicability within inspection and testing processes.
• Analyze production process conditions and manufacturing data to identify root causes of electrode nonconformance, including field quality issues, and implement corrective actions in collaboration with cross-functional teams.
• Conduct analysis of nonconforming electrode samples, document investigation results, report findings to headquarters, and implement corrective actions to prevent recurrence.
• Utilize analytical and statistical methods, including Statistical Process Control (SPC), to monitor electrode manufacturing quality, identify potential risk factors, and implement preventive quality measures.
• Perform surveillance audits of electrode production processes to verify compliance with quality standards, procedures, and operational requirements.
• Review and approve PPAP documentation and 4M process changes related to electrode manufacturing to ensure quality requirements are maintained.
• Perform cell validation testing, including performance, safety, and reliability evaluations, to confirm product quality and manufacturing process stability.
• Maintain worksite organization and cleanliness in accordance with 5S3R standards (Sort, Set in Order, Shine, Standardize, Sustain; Right Location, Right Quantity, Right Container) to support safe and efficient electrode inspection and testing operations.

Qualifications:
• Bachelor’s degree in Engineering required (Chemical, Electrical, Mechanical, Industrial, or Manufacturing Engineering preferred).
• 3+ years of experience in Quality Engineering or Manufacturing Engineering within an automotive or high-volume manufacturing environment, including internship or co-op experience.
• Experience supporting high-volume production environments, including development and implementation of Control Plans, PFMEA, and process controls.
• Knowledge of quality methodologies and problem-solving tools, including Minitab, Six Sigma, and 8D problem-solving methods.
• Experience using Microsoft Office and Minitab for data analysis and reporting.
• Knowledge of electrochemistry and lithium-ion battery cell materials (e.g., cathode, anode, separator) preferred.
• Experience performing cell validation testing, including performance, safety, and reliability testing.

Skills:
• Knowledge of APQP, inspection equipment and techniques, and root cause failure analysis methodologies.
• Familiarity with capability studies, statistical analysis, and manufacturing process evaluation.
• Understanding of PFMEA, Control Plans, PPAP, 8D/5-Why problem solving, and fault tree analysis (FTA).
• Knowledge of SOPs, Control Plans, CTQs, and parameters used for conducting process audits.
• Strong data analysis and reporting capabilities, including the ability to prepare technical reports and summarize quality findings.
• Excellent written and verbal communication skills with the ability to collaborate across production, engineering, and quality teams.
• Demonstrated teamwork and effectiveness in achieving organizational goals.

Job Summary: 

The Inspection Technology Engineer I supports the implementation, validation, and continuous improvement of automated inspection systems used in cylindrical lithium-ion battery cell manufacturing. This role focuses on ensuring inspection systems operate reliably, detect defects accurately, and support safe, high-volume production for EV battery applications.

The role is hands-on and highly collaborative, working closely with Production, Quality Assurance, Equipment Engineering, and EHS teams in a fast-paced environment. The engineer will gain exposure to vision systems, X-ray inspection, metrology, and automated electrical test systems across electrode, assembly, and formation processes.

Responsibilities:

Support inspection, manufacturing, or automation processes on the production floor.

Assist with setup, validation, and optimization of inspection and production equipment.

Analyze basic process and inspection data to support yield and quality improvements.

Support troubleshooting of equipment and process-related issues under guidance.

Participate in new model introductions and process change activities.

Follow SOPs, work instructions, and engineering standards.

Collaborate with technicians, engineers, and cross-functional teams.

Support documentation, reporting, and continuous improvement activities.

Qualifications:

Bachelor’s degree in Engineering (Mechanical, Electrical, Industrial, Manufacturing, or related field).

1+ years of experience in a manufacturing or industrial environment (internship or co-op acceptable).

Basic understanding of manufacturing processes and quality concepts.

Fundamental understanding of automated equipment or inspection systems.

Knowledge of machine vision algorithm libraries (Halcon, OpenCV) and deep learning models.

Exposure to maintenance of in-line inspection systems (Machine Vision, 3D metrology, X-ray and CT).

Understanding of measurement system analysis (MSA) and gage R&R using Minitab.

Skills:

Basic data analysis skills.

Problem-solving mindset with willingness to learn.

Strong communication and teamwork skills.

Ability to follow procedures and engineering standards.

Basic technical documentation skills.

Job Summary: 

As a Production Engineer II, the applicant will identify production line priorities and address abnormalities with the goal of meeting customer delivery targets of cylindrical batteries. This role requires skilled data analysis and the ability to communicate with multiple teams and operators to develop and implement solutions.

Responsibilities:

• Perform engineering activities measuring success through Key Performance Indicators (KPIs)
  of S (Safety), Q (Quality), C (Cost), D (Delivery)
  Report SQCD status and improvement plan regularly (weekly / monthly) 
• Address quality reports and events promptly to minimize possible impacts
  Track production record, identify highest fallout, and report/address causes
  (Send out quality alerts and report to team leader, finish with nonconformance (NCR) report)
• Develop short/mid/long-term improvement projects to address recurring quality issues
• Communicate with team and other departments to review activities
  Collaborate with other team members and departments to solve problems
• Identify production line priorities, abnormalities (down time, equipment issues), and any range of risk to product
• Communicate with local and international vendors and purchasing department to facilitate equipment installation, repairs and replacements
• Update standard documents after minor or critical SQCD issues for preventing recurrence
  All of improvement plans (Lessons Learned) have to be recorded in standard documents
  (e.g. Control plan, Work Standard, Breakdown Maintenance (BM)/Process Down (PD)/Preventive Maintenance (PM) Guide, Operating Manual, etc.)
• Teach and mentor other engineers, delegating tasks when appropriate
  (Train production team members on new equipment or procedures)
• Maintain cleanliness at work-site in accordance with 5S3R Standards 
• 5S: Sort, Set in order, Shine, Standardize, Sustain
• 3R: Right Location, Right Quantity, Right Container
• Ensure work is completed in a safe manner and maintain a safe work environment
• Perform other duties as assigned

Qualifications:

• Bachelor’s degree in Chemical Engineering, Mechanical Engineering, Manufacturing Engineering, or a related field.
• 3+ years of experience in a manufacturing, production, or plant environment (internships and co-ops included)
• Able to properly and regularly utilize the Personal Protective Equipment (PPE) for a period of up to 12 hours
• Must be able to perform the following over the course of up to 12 hours per day
  • Lift/push/pull up to 35 pounds on occasion
  • Stoop, twist, bend
  • Reach overhead
  • Sit and/or stand for lengthy periods
• Willingness to work in a fast-paced, hands-on environment as a member of a collaborative, cross-functional team. 

Desired Skills:

• Background in process engineering.
• Experience in large batching of chemicals.
• Strong communication and teamwork skills.
• Proficiency in Microsoft Office (Excel, Word, PowerPoint); experience with CAD or production management systems is a plus.
• Strong problem-solving skills and hands-on aptitude in a production setting.
• Familiarity with lean manufacturing tools and concepts (e.g., 5S, Kaizen, Value Stream Mapping) is a plus.
• Ability to analyze data and present findings clearly and concisely. Experienced with JMP, Minitab is a plus

Job Summary: 
At LG Energy Solution Arizona, Inc., the Sr. Engineer – Analysis, Quality Assurance leads complex failure investigations to identify the root causes of safety and reliability issues related to lithium-ion battery cells. Operating within an advanced laboratory and analytical environment, this role drives in-depth analysis of internal, external, and field-returned samples to determine failure mechanisms and systemic risks across supplier, production, and finished product stages. The Senior Engineer develops detailed technical reports, leads cross-functional investigations, and provides technical leadership for failure analysis activities and investigation strategy. Through these efforts, the role guides engineering and quality teams in implementing effective corrective and preventive actions that strengthen product safety and reliability.

Responsibilities:
• Lead structural and design safety risk analysis of lithium-ion battery cell systems using advanced analytical methods and precision analysis equipment.
• Lead complex battery failure investigations by analyzing internal samples, field-returned products, and adjacent cell conditions to identify root causes and failure mechanisms.
• Design and lead reproducibility experiments to validate suspected failure mechanisms and confirm systemic root causes of field quality issues.
• Serve as a Subject Matter Expert (SME) in failure analysis, mentoring engineers and guiding operators on standardized analysis methods and proper use of laboratory equipment.
• Develop and maintain a failure occurrence knowledge library documenting key failure phenomena identified through field quality investigations and reproducibility testing.
• Perform advanced data analysis and present investigation findings, root causes, and recommended corrective actions to engineering leadership and cross-functional stakeholders.
• Drive cross-functional investigations with Engineering, Quality, Customer Service/Warranty teams, suppliers, and global headquarters to resolve complex product issues and strengthen product reliability.
• Maintain laboratory organization and compliance with 5S3R standards (Sort, Set in Order, Shine, Standardize, Sustain; Right Location, Right Quantity, Right Container) to ensure a safe and efficient analysis environment.

Qualifications:
• Bachelor’s degree in Engineering or a related technical field; equivalent diploma with relevant experience may be considered.
• 7+ years of experience in quality engineering, failure analysis, or reproducibility testing within an automotive or manufacturing environment.
• Extensive experience conducting complex failure investigations of lithium-ion battery components, including fire-related or safety-critical events.
• Advanced experience using failure analysis and non-destructive testing equipment, including 3D CT systems, SEM/EDX, ion milling, mechanical polishing, or optical microscopy.
• Experience operating battery charge and discharge system equipment for product testing and failure investigation.
• Experience in metrology, measurement systems programs, and calibration processes preferred.
• Demonstrated problem-solving capability, with Six Sigma Green Belt or equivalent methodology experience preferred.
• Ability to work flexible hours as needed to support global collaboration and investigation activities.

Skills:
• Knowledge of IATF and ISO standards.
• Experience using Minitab, Six Sigma methodologies, and 8D problem-solving approaches.
• Excellent verbal, written, and presentation communication skills.
• Ability to provide technical guidance on failure analysis methods and investigation approaches.
• Strong critical thinking abilities and analytical problem-solving skills.
• Demonstrated teamwork and effectiveness in achieving project and organizational goals.
• Proficiency in Microsoft Office Suite and Minitab for data analysis and reporting.
• Strong data analysis and statistical problem-solving capability.

Job Summary: 

At LG Energy Solution Arizona, Inc., the Senior Engineer, Process Safety Lead will play a critical role in developing and managing process safety programs essential to lithium-ion battery manufacturing operations. This role oversees Process Safety Management (PSM), permitting systems, high-risk equipment safety, and safety planning for production and facility expansion projects. The position ensures regulatory compliance, mitigates high-hazard risks such as thermal runaway, chemical exposure, and equipment failures, and supports safe, reliable, and efficient plant operations.

Responsibilities:

• Lead the implementation, ongoing management, and continuous improvement of Process Safety Management (PSM) programs applicable to battery manufacturing processes.
• Maintain safety documentation, SOPs, and engineering controls relevant to battery production hazards.
• Oversee safety programs for high-risk equipment and develop inspection, testing, and preventive maintenance standards in partnership with engineering and maintenance teams.
• Lead annual and long-term EHS planning, including risk management programs, incident response strategies, and departmental improvement projects.
• Facilitate Process Hazard Analysis (PHA), Layer of Protection Analysis (LOPA), and Dust Hazard Analysis (DHA) for cyclical reviews and capital projects.
• Provide technical guidance and subject matter expertise to support effective implementation of process safety standards.
• Manage safety data, metrics, and dashboards; track KPIs and generate regular compliance and performance reports.
• Develop and deliver training programs on PSM, contractor safety, permits, equipment safety, and emergency procedures.
• Assist in emergency response planning and conduct tabletop or field drills with relevant teams.
• Support internal and external regulatory audits and ensure timely closure of findings.
• Drive continuous improvement initiatives to strengthen operational safety culture across the plant.
• Maintain cleanliness at the worksite in accordance with 5S3R Standards: Sort, Set in Order, Shine, Standardize, Sustain; Right Location, Right Quantity, Right Container.
• Follow LGESMI existing cleaning SOPs during downtime (e.g., line stop, waiting time, etc.), including cleaning of designated equipment and surrounding work areas.
• Perform other duties as assigned.

Qualifications:

• Bachelor’s degree in Engineering, Environmental Health & Safety, or a related field.
• 7+ years of EHS or process safety experience in battery manufacturing, chemical processing, or another high-hazard manufacturing environment.
• Strong knowledge of lithium-ion battery manufacturing hazards, including NMP, thermal runaway risks, and electrolyte handling and storage.
• Deep understanding of OSHA PSM, EPA RMP, NFPA, and chemical safety regulations applicable to battery production.
• Experience with risk assessment methodologies such as HAZOP, LOPA, and other process and dust hazard analyses.
• Ability to interpret engineering drawings, P&IDs, ventilation diagrams, and safety interlock systems.
• Strong leadership and communication skills for effective cross-functional coordination.

Skills:

Your Impact

As a Senior member of the TASER Electrical Engineering team, you will drive and engage in innovative hands-on design, development, and testing of cutting-edge electronics that are integral to Axon TASER Products. You will apply strong technical expertise and sound engineering judgment to deliver robust, high-quality designs that meet rigorous product and regulatory requirements. In this role, you will own substantial portions of circuit and subsystem designs, support system-level architecture decisions, and collaborate with cross-functional partners across product engineering, firmware, new product introduction, manufacturing, and quality teams. You will also mentor junior engineers and contribute to raising the technical bar within the team while continuing to grow your own technical leadership capabilities. Join a passionate engineering team dedicated to overcoming complex challenges, and help deliver technologies that positively impact Law Enforcement, Public Safety, and their surrounding communities.

Your Day-to-Day

• Research, propose, and develop innovative, industry-leading circuit designs for products such as TASER energy weapons, TASER-enabled devices, wirelessly connected TASER products, and related accessories
• Design, develop, and verify system circuitry and hardware aligned with project objectives and requirements
• Using OrCAD Schematic tools, design embedded Mixed-Signal electronic circuitry that integrates high voltage power supply circuitry, microcontrollers, flashlight/indication/display circuitry and drivers, memory devices (FLASH/EEPROM), switch-mode and linear power supplies, batteries, data interfaces (UART, SPI, I2C, USB), RF transceivers, electromechanical transducers, and other discrete digital and analog components
• Collaborate with PCB designers to guide layout implementation and review designs for signal integrity, power integrity, manufacturability, and reliability using Cadence layout tools
• Collaborate with cross-functional engineering teams, technology partners, and manufacturing teams to oversee electronics development throughout the entire product lifecycle, from concept to mass production
• Lead schematic and layout design inspections to improve the quality of design releases and product reliability
• Develop test methods and create test plans to evaluate and validate designs effectively
• Bring up, characterize, and debug systems and circuits using lab tools such as oscilloscopes, multimeters, logic analyzers, power supplies, hi-pot testers, etc.
• Evaluate and document design outcomes, test results, and related information, then present findings to the design teams for review and further action
• Support regulatory compliance efforts (FCC, CE, IEC, etc.) through design best practices and debug activities
• Optimize performance of electronics design using simulation tools and hands-on measurements
• Develop, evaluate, and help finalize assembly drawings, bill of materials, Geber files, and other design documentation needed for product release
• Partner with new product introduction team to develop and define test requirements documentation for PCBA board level testers and system functional test fixtures on the production line
• Mentor junior engineers and contribute to team knowledge sharing

Basic Qualifications

• Bachelor’s degree in Electrical Engineering or similar engineering discipline
• 6+ years of industry leading electronics design experience with emphasis on designing densely populated, tightly packaged, power control and delivery systems in embedded electronics
• Highly proficient in engineering processes and expectations across all design phases, with the ability to lead hardware design and development from concept through to mass production release
• Experienced system-level design engineer skilled in creating designs that meet product requirements. Proficient in collaborating with product and engineering teams to navigate design trade-offs and selections, ensuring a meticulous approach to minimize errors and deliver successful results
• Proficient in power supply design and selection based on product needs and trade-offs. Experienced in designing with switch-mode power supplies (buck, boost, buck/boost, and flyback), including circuit operation and component selection for custom applications. Strong background in high-voltage power supply design, with expertise in developing, testing, and characterizing custom magnetics considered a significant plus
• Demonstrated expertise and ownership of electronics architecture/design/integration and verification testing in several of the following areas: embedded microcontrollers, power supply design (switch-mode and linear regulators), power delivery networks, motor controllers, memory subsystems (FLASH/EEPROM), high speed and low speed communication interfaces (USB, UART, SPI, I2C), high power interfaces, battery specific applications, battery chargers, high power LED and driver design, and RF subsystem integration
• Experience designing products for electromagnetic compatibility and protecting circuitry against electromagnetic interference and electrostatic discharge events. Familiar with typical EMI/ESD filtering and protection techniques, as well as snubber circuitry design.
• Collaborates effectively with firmware engineering to develop and debug embedded electronic systems
• Strong hands-on proficiency with electronics bring-up, characterization, and debug using laboratory tools: Oscilloscope, power supplies, multimeters, custom jigs, etc.
• Proficient schematic design skills using industry leading design tools, including BOM development. Experience with Cadence/OrCAD desired. Experience developing rigid, flex, and rigid-flex PCB designs.
• Skilled in leading and collaborating with PCB and mechanical design engineers to develop PCB layouts that align with design requirements.
• Experience supporting products through regulatory compliance testing
• Independent contributor capable of developing products within cross-functional and geographically diverse engineering teams
• Strong proficiency in documentation, analysis, and presentation tools, including Word, Excel, and PowerPoint

Preferred Qualifications

• Experience designing tightly packaged, hand-held embedded systems powered by rechargeable batteries, including development with embedded microcontrollers and integration of electromechanical components such as solenoids

Benefits that Benefit You

• Competitive salary and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• And yes, we have snacks in our offices

Your Impact

As an RF Test Engineer, your work will be essential in ensuring that the wireless technologies in Axon's advanced products meet the highest performance, reliability, and compliance standards. Your hands-on expertise will drive the rigorous testing and optimization of RF systems that enable our cutting-edge body-worn cameras, vehicular systems, and connected devices. By leveraging your technical acumen and problem-solving skills, you will be instrumental in identifying and overcoming RF challenges, ensuring robust designs that operate seamlessly in diverse and demanding environments.

You will collaborate with cross-functional teams and global partners to verify and refine wireless designs, using state-of-the-art tools and methodologies. Your work will directly contribute to the development of reliable, high-performance solutions that serve Law Enforcement, Public Safety, and the communities they protect. Through your efforts, you will help deliver transformative technologies that empower public safety professionals and redefine industry standards.

What You’ll Do

• Design and implement test plans to evaluate the performance of wirelessly connected devices, ensuring they meet stringent product and regulatory requirements.
• Record RF test data and organize results, creating clear, actionable reports.
• Present findings and recommendations to cross-functional teams, enabling swift resolution of design challenges.
• Evaluate RF performance characteristics such as Total Radiated Power (TRP), Total Isotropic Sensitivity (TIS), and other over-the-air (OTA) metrics for cellular-enabled wireless devices using advanced equipment. (CMX500 and CMW500 in controlled chamber environments).
• Use instruments like spectrum analyzers and radio communication testers to assess conducted performance of wireless technologies, including LTE, 5G, Wi-Fi, Bluetooth, and GNSS.
• Support product field evaluations to validate RF performance under diverse real-world conditions, such as urban or rural environments
• As part of a collaborative team, investigate and debug issues such as poor sensitivity, low transmit power, or signal interference in wireless devices.
• Assist in the regulatory pre-certification and formal certification test efforts for hardware by preparing test samples, working closely with external test labs, troubleshooting issues, and ensuring successful completion of certification activities.
• Expand your knowledge of RF systems, testing methodologies, and certification standards while working closely with experienced engineers to develop your technical expertise and contribute to innovative designs.

What Your Bring

• Bachelor’s degree in Electrical Engineering, RF Engineering or similar discipline.
• Minimum of 3 years of hands-on embedded RF and wireless device testing experience
• Minimum of 3 years of wireless device test plan development for evaluating performance of various wireless interfaces against system and product requirements
• Solid understanding of basic RF principles and theory, familiar with basic RF technology circuitry stages and topologies.
• Experience characterizing RF components such as filters, switches, passives and signal paths.
• Experience testing modern RF hardware including multiband Wi-Fi, Bluetooth, Cellular (LTE, 5G FR1), and multi-constellation GNSS at the circuit, subsystem and device levels. Cellular experience is a must-have.
• High level of familiarity of cellular certification processes, test requirements, and test methods (PTCRB, CTIA, GCF, Carrier testing, etc), with hands on experience with device pretesting
• Familiarity of worldwide EMC and intentional radiator regulatory standards and test methods (FCC, CE, ETSI, etc). Hands on experience a plus.
• Proficient with hands-on operation of RF equipment such as RF communication testers (CMW, CMX, Litepoint), Network Analyzers, Spectrum Analyzers, RF power meters, Signal Generators, RF Test chambers
• Experience with collaborative RF debug at device and circuit level
• Familiarity reading electronics schematics, layout and mechanical drawings.
• Strong documentation and communication capabilities to effectively report test procedures, test results, and recommendations to the design team
• Motivated to operate independently, within cross-functional in-house design teams, and with external resources and test facilities.

Preferred Qualifications

• Familiar with Linux command line
• Experience with CMWrun test scripting tool

Benefits that Benefit You

• Competitive salary and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• And more...

** This position is not eligible for visa sponsorship for external candidates. Candidates cannot require sponsorship now or in the future**

Job’s mission

Our Global Sales, Services & Spares IQ and Sustaining teams are seeking Snr Engineers I & II, Field Service (level will depend on experience, degree and responsibilities. Please review below) to join ASM at a customer site (Intel) in Chandler, AZ. Domestic and International travel of at least 25% will be required for this role. As a Senior Field Service Engineer at ASM, you’ll play a critical role in supporting the advanced semiconductor equipment that powers the world’s most transformative technologies. You’ll take the lead on complex troubleshooting, guide and mentor engineers, and strengthen our partnerships by helping customers achieve stable, high‑performance fabrication environments. Your expertise will make a direct impact on tool reliability, customer satisfaction, and the next generation of ASM technology.

Shifts available:

• Shift 4 (6pm-6am)- Sun-Tu and every other Saturday
• Shift 5 (6am-6pm)- Sun- Tue and every other Wednesday 
• Shift 6 (6pm- 6am)- Wed-Fri and every other Saturday
• Shift 7 (6am- 6pm)- Wed-Sat and every other Wednesday

What you will be working on

Senior Engineer I, Field Service

• Install, maintain, and repair ASM semiconductor equipment with minimal supervision
  • Lead troubleshooting of complex tool or process issues using structured diagnostic methods
  • Perform root‑cause analysis and recommend targeted, data‑driven corrective actions
  • Review tool‑performance data to identify trends, risks, or improvement opportunities
  • Provide technical guidance and on‑the‑job coaching to less‑experienced engineers
  • Document service activities and support updates to procedures and best practices
  • Communicate solutions, progress, and expectations clearly with customer engineers
  • Participate in escalations alongside cross‑functional ASM engineering teams

Senior Engineer II, Field Service

• Serve as the senior technical lead for equipment installation, performance optimization, and recovery
• Diagnose and resolve highly complex, multi‑factor tool and process issues with limited guidance
• Lead advanced root‑cause analysis and drive long‑term corrective‑action plans that influence global engineering improvements
•  Own the customer‑technical relationship: build trust, anticipate operational needs, and act as ASM’s senior technical representative onsite
• Manage escalations end‑to‑end, aligning expectations, coordinating cross‑functional teams, and communicating clear action plans
• Guide, mentor, and develop engineers through hands‑on instruction, structured training, and knowledge‑sharing
• Champion best practices and contribute to procedure development, improvements, and field‑wide learning
•  Provide detailed field insights to R&D, product, and design teams, including support for beta tools or early‑option deployments

What we are looking for

Senior Engineer I, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 6+ years of experience, OR a Master’s degree with 4+ years of experience OR PhD degree with 0+ years of experience.
• Experience of semiconductor field service or capital‑equipment experience
• Ability to interpret electronic and electromechanical schematics
•  Experience with structured troubleshooting methodologies
• Knowledge of cleanroom and semiconductor safety protocols
• Strong written and verbal communication skills
• Ability to work independently and collaboratively in fast‑paced fab environments
• Willingness to travel domestically and internationally (minimum 25%)
• Proficiency in MS Office

Senior Engineer II, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 8+ years of experience, OR a Master’s degree with 6+ years of experience OR PhD degree with 4+ years of experience.
• Experience in semiconductor field service experience with demonstrated technical leadership
• Advanced knowledge of tool architecture, control algorithms, and multi‑factor troubleshooting
• Experience driving structured root‑cause analysis and long‑term corrective‑action plans
• Proven ability to lead escalations and manage customer‑technical relationships
• Strong communication and mentorship capabilities
• Ability to work autonomously while guiding and developing other engineers
• Willingness to travel domestically and internationally
• Proficiency in MS Office

What sets you apart

Senior Engineer I, Field Service

• Experience supporting beta tools or early‑option equipment
• Knowledge of wafer‑fab operations, robotics, vacuum systems, plasma, RF, or gas handling
• Experience writing or updating procedures or technical documentation
• Strong customer‑service approach and organizational skills
• Familiarity with structured problem‑solving methods

Senior Engineer II, Field Service

• Demonstrated leadership in complex troubleshooting programs or technical initiatives
• Experience owning customer‑technical relationships, including expectations and long‑term partnership building
• Strong capability in mentoring and developing field engineers
• Hands‑on expertise with fab robotics, vacuum systems, plasma, RF, or gas‑delivery systems
• Experience providing structured feedback to engineering or product teams
• Experience evaluating or supporting beta‑stage or early‑option tools

As a Field Service Engineer, you’ll bring the technical discipline, precision, and equipment expertise you developed in the military to support ASM’s advanced semiconductor tools and help our customers keep their fabs running at peak performance. You’ll work with the same mindset you relied on in mission‑critical environments—applying your engineering background and real‑world troubleshooting experience to technologies that power AI, 5G, cloud computing, and next‑generation devices. This is a chance to leverage the skills you gained maintaining complex systems in the field and continue building your technical mastery in a rapidly growing, high‑tech industry. 

In this role, you’ll operate at the center of cutting‑edge semiconductor manufacturing. It’s an ideal opportunity for veterans and transitioning service members who have supported sophisticated mechanical, electrical, or electronic systems and want to apply that expertise in a world‑class technology environment where every day brings new challenges to solve. 

From day one, you’ll receive structured training and hands‑on guidance from experienced engineers onsite. You’ll work with vacuum systems, plasma, chemical delivery, robotics, sensors, advanced metrology, and complex hardware‑software interactions—equipment that will feel familiar if you’ve maintained avionics, electronics, propulsion, navigation, comms, radar, robotics, or similar military systems. Your contributions will directly impact tool performance, system uptime, and customer success, forming a strong foundation for long‑term growth and a variety of career paths within ASM. 

Shifts available:

• Shift 4 (6pm-6am)- Sun-Tu and every other Saturday
• Shift 6 (6pm- 6am)- Wed-Fri and every other Saturday

What you will be working on 

• Install, maintain, troubleshoot, and repair ASM semiconductor equipment at customer sites
• Diagnose mechanical, electrical, and process issues in collaboration with senior engineering staff
• Deliver responsive, customer‑focused service with a strong commitment to safety and operational discipline
• Working in cleanroom environments while following strict safety and quality standards
• Assisting, identifying and contributing to continuous improvement efforts 
• Participate in escalations and cross‑functional problem‑solving
• Work on an assigned shift schedule supporting 24/7 manufacturing operations

What we are looking for 

• Bachelor’s or master’s degree in Mechanical Engineering, Electrical Engineering, Electromechanical Engineering, or related field
• Hands-on technical experience maintaining, repairing, or troubleshooting complex mechanical, electrical, or electronic systems
• Proven ability to diagnose complex system faults, follow technical procedures with precision, and maintain equipment in mission‑critical environments 
• Experience working under strict safety protocols, lock‑out/tag‑out procedures, and high‑reliability operational standards
• Comfort working in shift-based environments where readiness, accountability, and teamwork are essential
• Demonstratedability to stay calm under pressure, adapt quickly to changing conditions, and take ownership of equipment performance in demanding situations 
• Ability to read and interpret electronic and electromechanical schematics
• Strong troubleshooting skills and disciplined adherence to safety
• Ability to work in a cleanroom environment
• Clear and effective written and verbal communication
• Ability to work independently and collaboratively
• Willingness to travel domestically and internationally
•  Proficiency with Microsoft Office 

What sets you apart 

• Experience with equipment, gas handling, or high‑precision machinery
• Experience writing or updating technical documentation
• Background in customer‑facing or technical support roles
• Familiarity with structured problem‑solving, data analysis, or statistical methodologies
• Military experience such as Avionics Technician, Electronics Technician, Nuclear Machinist Mate, Satellite/Communications Systems Technician, or similar specialties

Why join ASM?  

With us, you will have strong long‑term growth potential at the forefront of semiconductor technology. Your first role as an FSE is the foundation - not necessarily the finish line. With clear pathways into technical leadership, operations, product roles, program management, technical sales and process engineering, ASM gives you the flexibility to grow in the direction that fits you best in an industry that makes AI possible.  

2026 is the year to join ASM as a Field Service Engineer. Apply now! 

• Bachelor’s degree in Electromechanical Engineering or related field  
• 1–3 years of technical experience in field service, or manufacturing of OEM capital equipment
• Ability to read and interpret electronic and electromechanical schematics
• Basic knowledge of safety protocols and cleanroom guidelines
• Ability to apply rules and procedures in own activities
• Ability to fully understand tool architecture and control algorithms and explain operating principals to peers
• Clear written and verbal communication skills
• Ability to work independently and in a team
• Willing to travel up to as required for the role domestically and internationally
• Knowledge of safety procedures and cleanroom guidelines
• Proficiency with MS Office

Engineer II, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 4+ years of experience, or a Master’s degree with 0 years of experience
• Experience in field service or semiconductor capital equipment
• Ability to interpret electronic and electromechanical schematics
• Experience with structured troubleshooting methodologies
• Knowledge of cleanroom and semiconductor safety protocols
• Strong communication skills, both written and verbal
• Ability to work independently and within a team
• Willingness to travel domestically and internationally
• Proficiency with MS Office

What sets you apart

Engineer I, Field Service

• Semiconductor field service or capital equipment experience
• Knowledge of wafer fab operations, robotics, vacuum systems, plasma, or gas handling
• Experience writing procedures or process documentation
• Strong customer‑service mindset and organizational skills
• Familiarity with structured problem‑solving methods
• Experience supporting escalations or beta‑site activities

Engineer II, Field Service

• Hands‑on semiconductor field service experience
• Working knowledge of wafer fab operations, robotics, vacuum systems, plasma, RF, or gas handling
• Experience leading structured root‑cause analysis
• Experience providing field data to engineering or design teams
• Background supporting beta‑stage or early‑option tools
• Familiarity with structured problem‑solving techniques
• Strong customer‑service mindset and organizational skills

Our Atomic Layer Deposition (ALD) Chamber Engineering team is seeking innovative and driven and experienced Mechanical Engineers to join their teams. Our ALD and team is at the forefront of developing cutting-edge technologies. As a Mechanical Engineer at ASM, you will contribute to designing, developing, and optimizing high-precision equipment. Collaborating with cross-disciplinary teams, you will play a critical role in solving complex engineering challenges, ensuring product reliability, and driving technological advancements. 

Responsibilities:

• Apply sound engineering principles, product specifications and research data to create designs for systems and products for semiconductor industry.
• Perform engineering calculations including structural, thermal and fluid dynamics problems
• Create and revise Creo Parametric CAD models and detail drawings, ranging in complexity from simple piece parts to large assemblies
• Determine feasibility of product proposals, resolve problems based on technical inputs and develop new designs maintaining product design safety criteria. Apply statistics to optimize and deliver “first time right” designs.
• Prepare product/system designs and related engineering documentation for the manufacturing and testing of prototype and production released products. The documentation shall be complete and easy to follow.
• Project management duties include report generation, schedule creation and maintenance, design reviews and interdepartmental coordination.
• Provide assistance in establishing product configuration and structures on new products and features in both development and manufacturing environments.
• Present and participate in design reviews for unique customer driven specials, product enhancements and other new designs.
• Create, manage and execute engineering project plans, including task scheduling with Gantt charts and resource and cost estimates,
• Travel to customer sites/supplier sites to participate in technical discussions.
• Assist marketing and vendors in preparation of cost estimates dealing with nonstandard options, new system features and product enhancements. 
• Support projects in conjunction with technical staff, managers and manufacturing groups. Support development, installation and testing of hardware to verify performance. Create test plans, verify and approve test procedures. 
• Interface with other organizations on new product updates and ensure a smooth transition of the product into the manufacturing cycle.
• Evaluate change requests and complete all aspects of engineering change orders.

Qualifications:

• Masters in Mechanical Engineering or related degree, PhD strongly preferred. 
• Experience in engineering, design, and development of complex mechanical systems including: reactors, vacuum chambers, gas delivery systems, pneumatics, water cooling circuits, and vacuum systems required.

Skills:

• Semiconductor capital equipment or heavy capital equipment preferred.
• Deposition product knowledge a plus (CVD, ALD, EPI, PVD)
• Knowledgeable in the requirements for CE, NFPA, Semi S2-95 and other relevant standards as applicable to semiconductor manufacturing equipment.
• Understanding of materials: metals, plastics, surface coatings and surface finishes.
• Computer background in Microsoft applications, CREO and AutoCAD.
• Proficiency in ASME Y14.5 and/or ISO 1101:2017 preferred geometric dimension and tolerance
• Has knowledge of best practices and how own area integrates with others; recommends product and process improvements.
• Able to work with a diverse team to achieve requirements and specifications on complex projects.
• Capability to provide and maintain resource coordination and reporting, interfacing with other organizations and outside vendors on resource requirements.
• A critical thinker with proven ability to create effective solutions to complex engineering problems.
• Excellent verbal and written communication; ability to present design concepts to peers and management in a professional and effective manner.
• Ability to work in a team environment with aggressive deadlines and multiple priorities while maintaining a team player attitude.
• Perform self-inspection of all work and is responsible for ensuring that all work performed adheres to documentation requirements, company policies and procedures.

Your Impact 

This role sits at the intersection of engineering and supply chain, owning component strategy from design through full product lifecycle. You will directly influence product cost, supply resilience, and scalability by driving component selection, supplier strategy, and lifecycle risk management across Axon’s product portfolio. 

What You’ll Do 

Location: Scottsdale, Arizona (HQ) 
Reports to: Director of Category Management  
Direct Reports: none 

• Partner with design engineering teams early in the NPI development process to influence component selection by leveraging your industry experience. 

• Establish strong relationships with manufacturers and their associated representatives in the electronics industry to understand product roadmaps and availability to support current and future product development.  

• Work with the sourcing team to develop and ramp component sources for new products and support the NPI team’s efforts to ensure components are purchased in a timely manner for engineering development builds.  

• Leverage your technical expertise and industry knowledge to select key strategic components to support product scalability for 5+ year lifecycles. 

• Assist the respective Category Managers and cross-functional category teams in developing and executing multidimensional commodity strategies that support the NPI work stream with an emphasis on cost optimization, time to market, technology, quality, supply continuity, supply chain consolidation, service and risk mitigation. 

• Identify and manage the implementation of cost reduction opportunities on new and existing products in collaboration with the category management and continuous engineering teams. 

• Identify risks in our current supply chain and work together with the Category Managers and Continuous Engineering team to qualify additional sources of supply for critical components on our BOM’s. 

• Manage all active BOMs in the electronic component database tool. 

• Own the development and maintenance of the EOL Maintenance Process based on incoming manufacturer Product Change Notices (PCN's). 

• Provide formal reports on obsolescence and environmental solutions for electronic components including DMSMS (Diminishing Manufacturing Sources and Material Shortages) Management, PCN’s, and EOL’s. 

• Provide input to new designs to improve product reliability and longevity. 

• Provide support to the team regarding cost, availability, and technical advantages of various component choices and manufacturer choices. 

• Ensure all existing and new internal part numbers, datasheets and descriptions are correct in our databases. 

• Generate internal standards relating to component selection. 

• Liaise with external agencies regarding reliability and component issues. 

What You Bring 

• BS in Electrical Engineering, or related field. 

• 5+ years of experience in component engineering or related roles. 

• Work experience in a new product introduction (NPI) sourcing environment is preferred. 

• Ability to coordinate cross functionally with groups such as Engineering, Quality, Global Supply Chain, Operations and Contract Manufacturers to resolve issues pertaining to component selection and use. 

• Complete understanding/working knowledge of engineering documentation (i.e., schematics, component data sheets, Gerber files, etc.) and standard document control practices (ECRs, ECOs, deviations, etc.) 

• Ability to work on multiple cross functional projects simultaneously. 

• Ability to develop strong relationships with key stakeholders to drive proper rigor in the supplier selection process. 

• Self-motivated, resourceful, and ability to work in a fast-paced environment. 

• Ability to manage rapid changes typical during the NPI development process. 

• Experience with Arena Product Lifecycle Management (PLM) or equivalent and quality management system (QMS) required. 

• Experience with schematic tools like Cadence\Altium\Siemens is a plus. 

• Experience with electronic database management tools like Silicon Expert, Z2Data, or IHS Markit preferred. 

• Experience with MS Dynamics 365 Enterprise Resource Planning (ERP) System preferred. 

• Experience with Jira project and issue tracking preferred. 

• Experience with Quip, SharePoint and other collaboration tools preferred. 

• Excellent communicator, ability to lead and influence change in the face of complexity and ambiguity.  

• Analytical, fact based with keen attention to detail. 

• Proficient in managing and understanding cross-cultural business practices. 

• Experience in electronic and mechanical component analysis and selection. 

• Familiarity with manufacturing and design environments. 

• Excellent oral and written communications skills. 

• Ability to work with little or no supervision. 
• Willingness to learn new skills and stay up to date on the latest technologies. 
• Familiarity with conflict mineral reporting and other compliance/EHS related tasks 
• Strong interpersonal skills 

• Very organized and high attention to detail. 

• Able to work under high pressure and deliver results. 

• Located or willing to relocate to Scottsdale, AZ. 

• Ability to influence, create win/win situations, and produce results. 
• Previous design experience, schematic capture and layout. 

Benefits that Benefit You 

• Competitive salary and 401k with employer match 

• Discretionary paid time off 

• Paid parental leave for all 

• Medical, Dental, Vision plans 

• Fitness Programs 

• Emotional & Mental Wellness support 

• Learning & Development programs 

• And yes, we have snacks in our offices 

Benefits listed herein may vary depending on the nature of your employment and the location where you work 

Your Impact

As a key member of our Validation team, you’ll help ensure every product and system meets the highest standards before it reaches our customers. You’ll develop Validation Test Procedures (VTPs), create comprehensive test plans, and collaborate with R&D and other teams to execute testing from start to finish. Your technical expertise will guide product evaluations, uncover issues, and drive resolutions alongside cross-functional partners. In this role, you’ll work closely with Engineering, Manufacturing, Quality Assurance, Project Management, and Supply Chain—making your communication skills just as important as your technical know-how.

What You’ll Do
Location: Onsite at our Deer Valley, Arizona location
Reports to: Manager, Hardware Validation & Reliability Engineering
Direct Reports: none

• Develop comprehensive test plans for our products
• Incorporate Statistical Analysis into Validation Testing
• Review & provide input into System & Product Requirements.
• Test Axon product capabilities & features to confirm requirements are met and ensure a smooth customer experience.
• Understanding troubleshooting firmware/software or hardware issue at a system level.
• Participate in occasional field testing of Axon products
• Work with a team of skilled technicians to ensure timely execution of the test plans
• Provide status updates and recommendations based on data results, and lead final reporting of validation efforts
• Leverage Engineering background to improve tests and processes
• Design and hone Validation Test Procedures with an emphasis on repeatability, standardization, and accuracy of testing
• Lead and oversee execution of all validation tests – including Firmware/Software, Mechanical, Environmental, and Electrical
• Document, track, and report test status and results to Engineering teams, following Good Documentation Practices (GDP).
• Support Failure Analysis (FA) and Root Cause Analysis (RCA) on issues found in test
• Work with external labs to coordinate required testing
• Implement and maintain 5S Standard for lab organization and management
• Develop customer usage models of all products

What You Bring

• MS or BS Degree in Engineering, Mechanical, Electrical, Electromechanical, Reliability or equivalent.
• Minimum of (5 years) of experience with validation or qualification testing
• Mechanical and Environmental test experience
• Test standards experience (MIL-STD, ISO, IEC, etc.)
• Test automation and basic code scripting, experience.
• Willingness to drive department improvement efforts
• Good attention to detail and documentation
• Experience in a regulated environment, a plus
• Experience with identifying, reproducing, documenting, and reporting bugs or issues
• Experience presenting test plan and requirements to stakeholders
• Understanding of Product Development Life Cycle
• Familiar with Project Management skill set, certified PMP a plus
• Familiar with Bug and Test Tracking Suites such as JIRA a plus
• Experience with manufacturing and assembly process
• Excellent analytical and problem-solving skills
• Excellent skills in MS Office products
• Ability to influence multi-functional organizations
• Certification in Six Sigma Black Belt or Green Belt ,a plus

Benefits that Benefit You

•Competitive salary and 401k with employer match
•Discretionary paid time off
•Paid parental leave for all
•Medical, Dental, Vision plans
•Fitness Programs
•Emotional & Mental Wellness support
•Learning & Development programs
•And yes, we have snacks in our offices

Benefits listed herein may vary depending on the nature of your employment and the location
where you work

As a Senior Engineer, Global Product Management at ASM, you’ll experience a dynamic and diverse scope of responsibilities that go beyond what’s typically offered at larger organizations. This role is ideal for someone who thrives in a fast-paced, intellectually stimulating environment and values autonomy, innovation, and cross-functional collaboration. 

You’ll be empowered to think creatively and strategically, working closely with global customers and internal teams to deliver cutting-edge solutions. Every day brings new challenges and opportunities to make a meaningful impact across the product lifecycle—from concept to commercialization. 

Key Responsibilities:  

• Product Lifecycle Management: Lead products from initial concept through high-volume manufacturing to end-of-life, ensuring alignment with market needs and business goals. 
• Roadmap Development: Own and maintain product roadmaps across a portfolio, updating regularly through customer insights and internal collaboration. 
• Product Definition: Own and maintain product structure, configuration, and options to support customer requests and efficient manufacturing execution.
• Customer Engagement: Drive technical discussions, create impactful presentations, and conduct detailed market and competitive analyses to support customer interactions.
• Market Requirements Specification (MRS): Develop and manage MRS documents to guide product development priorities and ensure alignment with customer expectations.
• Strategic Marketing: Craft go-to-market strategies, support executive R&D investment decisions, and develop high-level product strategy presentations.
• Financial Analysis: Collaborate with finance to assess product viability using NPV and IRR models; maintain cost-of-ownership frameworks.
• Business Planning & Market Analysis: Contribute to operational planning, business forecasting, and budget development through market intelligence and competitive analysis.
• New Product Introduction (NPI): Conduct market inflection analysis, develop business cases, align internal stakeholders, and position products for successful launch.
• Technical Collaboration: Partner with development teams to define specifications, manage demo requests, and prioritize product development efforts.
• Supplier Engagement: Build strategic supplier relationships to enable key capabilities for new products.
• Product Promotion: Create promotional content for conferences and product launches; deliver training and support to sales teams and customers. 

Requirements: 

• 3–10 years of experience in technical marketing within the semiconductor, capital equipment, or related industries 

• Advanced degree (Master’s or PhD) in Material Science, Electrical, Chemical, or Mechanical Engineering (or equivalent) 

• Strong background in semiconductor processes, hardware, or device technologies 

• Experience with ALD, CVD, Epi, or vacuum systems is a plus 

• Deep understanding of capital equipment systems and their applications 

• Proven track record of direct customer engagement and supplier management 

• Ability to collaborate across disciplines and manage a diverse product portfolio 

• Solid grasp of product lifecycle and technical marketing principles 

• Willingness and ability to travel globally 

As a Senior Engineer II, Mechanical Engineering at ASM, you will play a pivotal role in design and development of high‑precision ALD chamber and semiconductor equipment systems. In this role, you will apply solid mechanical engineering fundamentals to solve complex design challenges, support new product development, and ensure reliable transition from design to manufacturing. Working closely with cross‑functional teams, you will help drive product quality, performance, and innovation. 

What you will be working on 

• Design and develop mechanical systems and components for semiconductor equipment, applying sound engineering principles, product specifications, and research data. 
• Perform engineering calculations related to structural, thermal, and fluid dynamics to support robust and reliable designs. 
• Create and maintain Creo Parametric 3D CAD models and detailed drawings, ranging from individual parts to complex assemblies. 
• Evaluate the feasibility of product proposals, resolve technical issues, and develop new designs in compliance with product safety and design standards. 
• Manage Continuous Improvement Projects (CIPs) and ensure clear communication across teams and with external partners. 
• Prepare complete and clear engineering documentation to support prototype builds, manufacturing, and testing of released products. 
• Support engineering project activities, including report preparation, schedule planning, design reviews, and coordination with cross‑functional teams. 
• Establish product configurations and structures for new products and features in both development and manufacturing environments. 
• Participate in and present at design reviews for new designs, product enhancements, and customer‑specific solutions. 
• Support hardware development, installation, and testing to verify performance; create, review, and approve test plans and test procedures. 
• Interface with manufacturing, suppliers, and other engineering teams to ensure smooth product transfer into the manufacturing cycle. 
• Review and process engineering change requests (ECR/ECO) and support continuous product and process improvements. 
• Travel to customer or supplier sites as needed to support technical discussions and project execution. 
• Maintain a strong commitment to safety in all activities. 

What we are looking for 

• Master’s degree in mechanical engineering or related disciplines. 
• Several years of hands‑on experience in mechanical design and development of complex systems within semiconductor or capital equipment industries. 
• Practical experience with mechanical systems such as vacuum chambers, reactors, susceptor heaters, gas delivery systems, pneumatics, cooling circuits. 
• Ability to perform simulation and engineering analysis (e.g., structural, thermal, fluid dynamics) to support robust and reliable designs. 
• Proficiency in Creo (or equivalent CAD tools) and ability to create detailed engineering drawings 
• Solid understanding of materials, manufacturing processes, and mechanical design fundamentals. 
• Strong problem‑solving skills and the ability to work effectively in a cross‑functional, fast‑paced environment. 

What sets you apart 

• PhD in Mechanical Engineering or related degree.  
• Experience with semiconductor deposition equipment (ALD, CVD). 
• Strong capability to run and interpret Multiphysics simulations (structural, thermal, CFD) and apply the results to improve design specifications. 
• Experience with Susceptor heaters, Vacuum and electrostatic chucks. 
• Proficiency in GD&T standards (ASME Y14.5 and/or ISO 1101). 
• Experience supporting products through the full lifecycle, from concept and design to manufacturing release. 
• Ability to independently manage technical tasks while contributing effectively as a team player. 

The Key Account Technologists are the ASM product experts who support extensive customer and internal company contacts while driving the introduction of new products, product improvements, and product modifications.  As a Key Account Technologist (KAT) you'll help to expand product market share by helping win development tool of record (DTOR) selections and supporting competitive process application performance of the installed base. Further, the role requires someone who is not only skilled in R&D/Innovation, development, engineering, and design for manufacturability, but also someone who can be a key team member developing and delivering the ALD technology roadmap. This role requires interactions and communication between the product development team and the customer to ensure customer issues and concerns are being addressed with solutions and timelines.  A persistent approach to Product Life Cycle (PLC) will also be required to achieve strong engagement with the new product development team. This position requires Korean, Japanese or Mandarin language skills.

RESPONSIBILITIES:

• Responsible for process application NPI (New Product Introduction), product improvements, and product modifications for key product unit (KPU) installed base
• Develop and maintain relationships with key customers.
• Responsible for managing all the technical account aspects of customers
• Responsible for resolution of process and hardware-related escalations in the field
• Responsible for defining, maintaining, and implementing BKM process for all process applications – including standards, specs, and recipes, installed base performance
• Support highly engaged working relationship between KAT department, ASM’s customer account teams and customers’ engineers to ensure all customer needs and requirements are understood and addressed
• Drive close cooperation with multiple internal stakeholders, especially with Process Development teams, Global Sales, Service and Spares, Account Teams, Engineering and Global Product Management (GPM)

Key SELECTION CRITERIA:

• Excellent Korean, Japanese, or Mandarin language skills, both written and spoken
• 5+ years (or 3+ years with Ph.D.) experience in the semiconductor wafer processing or capital equipment industry
• Master’s degree (or above) in material science, physics, chemical, mechanical or electrical engineering, or related field
• Related work experience can include process engineering, technical marketing, or product support
• Proven ability to drive continuous improvement across operations
• Able to build long term relationships of trust with customers
• Strong written and verbal communication skills including excellent presentation and influencing skills
• Semiconductor experience should be primarily focused on atomic layer deposition (ALD) or chemical vapor deposition (CVD).
• Experience in work function, metallization, silicides, and electrodes in logic or memory is preferred

PERSONAL / professional ATTRIBUTES:

• Self-starter with high energy and strong work ethic
• Highly motivated and results driven
• A proactive change agent
• A strategic thinker with the ability to implement and drive tactics, strong at execution
• A problem solver – communication comes naturally when solving problems and addressing roadblocks.
• Able to independently make and execute decisions in a timely manner, leading people accordingly
• Ability to lead and influence others across cultures
• Highly collaborative and able to manage conflict

Travel:

• Flexibility to travel up to 30% of the time (internationally)

Job’s mission

As ASM accelerates its global PLM modernization journey, you’ll play a pivotal role in shaping how our engineers design, build, and innovate. You will guide the evolution of enterprise Teamcenter solutions that power our product development and manufacturing workflows across a global engineering community. Your work will help streamline collaboration, sharpen data quality, and bring next‑generation semiconductor technology to life faster and more reliably.

What you will be working on

• Work closely with engineering and manufacturing teams to translate business needs into scalable PLM and Teamcenter solutions.
• Support user adoption by guiding use cases, partnering with vendors, and driving enhancements that elevate product capabilities and business processes.
• Identify opportunities and challenges across current workflows and help shape the PLM technology strategy and roadmap.
• Maintain, optimize, and evolve Teamcenter configurations, processes, integrations, and supporting tools.
• Lead complex, multi‑team technology initiatives that deliver measurable improvements in efficiency and engineering experience.
• Apply project management practices that help teams work more effectively and collaboratively.
• Use your understanding of PLM architecture—workflows, APIs, runtime behavior, and system characteristics—to build scalable, reliable solutions.
• Manage PLM processes and tools in an electro‑mechanical environment.
• Drive integrations and automation with adjacent business systems including Oracle and Agile.
• Develop and monitor PLM data metrics to maintain stability, data accuracy, and smooth operation.
• Partner with cross‑functional users to gather insights and enhance product development, manufacturing, and operations workflows.
• Monitor and enhance Engineering Change processes to support quality and faster cycle times.
• Define product structure and Bill of Material (BOM) standards that ensure consistent, high‑quality data.
• Champion continuous improvement across PLM processes and lifecycle governance.
• Collaborate with developers to scope and implement new features that support evolving business needs.
• Deliver training, workshops, and guidance to promote PLM best practices and adoption.
• Stay current with industry trends and emerging technologies to drive ongoing improvement within PLM and engineering systems.

What we are looking for

• BS + 8 years, OR MS + 4 years, OR PhD with relevant experience in Mechanical, Industrial, or related engineering fields.
• Extensive experience implementing Siemens Teamcenter PLM solutions including configuration, setup, upgrades, and solution design.
• Experience leading requirements gathering, fit‑gap analysis, functional design, system testing, solution delivery, and user acceptance.
• Experience leading at least one full Teamcenter implementation in a complex engineering or manufacturing environment.
• Hands‑on experience with Teamcenter modules, BMIDE, ITK, and AWC development.
• Experience supporting PLM processes within an electro‑mechanical product environment.
• Experience integrating PLM with enterprise applications such as Oracle and Agile.
• Experience partnering with design engineering, manufacturing, and operations teams to drive improvements.
• Experience improving Engineering Change processes and lifecycle governance.
• Experience defining product structures and BOM standards.
• Ability to deliver training and support ongoing PLM adoption.
• Understanding of PLM architecture including workflows, APIs, and system behavior.

What sets you apart

• Experience with PLM and 3D CAD in the semiconductor industry.
• Experience with NPI lifecycle management, BOM configuration, and engineering change processes.
• Experience developing PLM metrics and dashboards.
• Experience supporting globally distributed engineering teams.
• Experience leading modernization or transformation initiatives within PLM or Engineering IT.

Be the Expert Others Rely On—Advance EPI Technology at ASM

Global Product Support Engineer

At ASM, our technology enables the world’s most advanced semiconductor manufacturing—and when the challenges are toughest, our experts step in. We’re seeking a Senior Global Product Support Engineer who thrives on solving complex problems, supporting cutting‑edge tools, and making a real difference for customers and field teams worldwide.

In this role, you’ll serve as the go‑to technical authority, supporting advanced EPI systems when issues demand deep expertise beyond first‑line support. Your work will directly impact tool performance, customer confidence, and ASM’s reputation for technical excellence.

What You’ll Do

As a Global Product Support Engineer, you’ll operate at the highest technical level, combining hands‑on problem solving with global collaboration:

• Provide advanced technical support for complex electro‑mechanical equipment and sophisticated software systems
• Diagnose, troubleshoot, repair, and debug issues escalated by field engineers and product support teams
• Act as the escalation point when standard troubleshooting paths are exhausted, delivering clear solutions under pressure
• Partner with engineering teams by reporting design, reliability, and maintenance insights that drive continuous improvement
• Support customer installations and deliver technical training when deeper expertise is required
• Engage directly with customers to resolve highly technical issues and ensure optimal system performance
• Travel globally (up to 50%) to support field operations, customer sites, and critical escalations

What We’re Looking For

You bring strong semiconductor experience, technical depth, and the confidence to lead in high‑stakes situations:

• Proven experience diagnosing and resolving complex technical issues
• Minimum 3 years of experience in semiconductor manufacturing environments
• Bachelor’s degree in Engineering (Mechanical or Electrical Engineering preferred)
• Strong understanding of electro‑mechanical systems and software‑driven equipment
• Excellent analytical and problem‑solving skills
• Ability to clearly communicate complex technical concepts to both technical and non‑technical audiences
• Strong presentation skills and comfort leading technical discussions
• Willingness and ability to travel locally and internationally up to 50%
• Customer‑focused mindset with the ability to remain effective in challenging, time‑critical situations

The Key Account Technologists are the ASM product experts who support extensive customer and internal company contacts while driving the introduction of new products, product improvements, and product modifications.  As a Key Account Technologist (KAT) you'll help to expand product market share by helping win development tool of record (DTOR) selections and supporting competitive process application performance of the installed base. Further, the role requires someone who is not only skilled in R&D/Innovation, development, engineering, and design for manufacturability, but also someone who can be a key team member developing and delivering the PECVD technology roadmap. This role requires interactions and communication between the product development team and the customer to ensure customer issues and concerns are being addressed with solutions and timelines.  A persistent approach to Product Life Cycle (PLC) will also be required to achieve strong engagement with the new product development team.

Responsibilities:

• Responsible for process application NPI (New Product Introduction), product improvements, and product modifications for key product unit (KPU) installed base
• Develop and maintain relationships with key customers.
• Responsible for managing all the technical account aspects of customers
• Responsible for resolution of New process escalations in the field during NPI stage
• Responsible for defining and implementing BKM process for all process applications – including standards, specs, and recipes, installed base performance
• Support highly engaged working relationship between KAT department, ASM’s customer account teams and customers’ engineers to ensure all customer needs and requirements are understood and addressed
• Drive close cooperation with multiple internal stakeholders, especially with Process Development teams, Business Development Team, Account Teams, Engineering and Global Product Management (GPM)

Qualifications:

• 5+ years (or 3+ years with Ph.D.) experience in the semiconductor wafer processing or capital equipment industry
• Master’s degree (or above) in material science, physics, chemical, mechanical or electrical engineering, or related field
• Related work experience can include process engineering, technical marketing, or product support
• Proven ability to drive continuous improvement across operations
• Able to build long term relationships of trust with customers
• Strong written and verbal communication skills including excellent presentation and influencing skills
• Semiconductor experience should be primarily focused on PECVD.
• Experience in work function, metallization, silicides, and electrodes in logic or memory is preferred

Attributes:

• Self-starter with high energy and strong work ethic
• Highly motivated and results driven
• A proactive change agent
• A strategic thinker with the ability to implement and drive tactics, strong at execution
• A problem solver – communication comes naturally when solving problems and addressing roadblocks.
• Able to independently make and execute decisions in a timely manner, leading people accordingly
• Ability to lead and influence others across cultures
• Highly collaborative and able to manage conflict

Travel:

• Flexibility to travel up to 30% of the time (internationally)

We are seeking R&D-oriented Engineers to join our team in the development and improvement of semiconductor manufacturing equipment, specifically focusing on plasma-based chambers.

Key Responsibilities:

· Conduct research and development of components and mechanisms, including concept creation, feasibility studies, and practical evaluation/testing.

· Perform hardware characterization, define process window, and analyze process-hardware interaction.

· Design experiments, collect data, analyze results, and compile reports on various process development experiments

· Develop new equipment and functionalities, as well as improve existing equipment, from specification to detailed design.

· Ability to function in multi-disciplined fields (Process development, Hardware development and Metrology)

Required Skills:

· PhD in Physics, Engineering (Chemical, Electrical, Mechanical, or related fields), Material Science or Master degree with at least 3 years professional experience.

· In-depth knowledge of low-pressure RF plasma systems, including ICP, CCP, and microwave plasma sources

· Strong understanding of plasma-surface interactions, and precursor/plasma chemistry. Familiarity with PECVD, PEALD, RIE process mechanisms.

· Excellent communication skills for technical documentation, cross-functional collaboration, and customer-facing discussions

Preferred Skills:

· Familiarity with epitaxial silicon growth and characterization

· Familiarity with EM and multi-physics simulation tools (e.g., COMSOL, High Frequency Simulation software such as Ansys HFSS, CST studio )

· Familiarity with plasma diagnostics (e.g., Langmuir probes, OES, VI probes)

· Familiarity with common thin-film & chemical characterization & metrology techniques including: SEM, TEM, XRD, Ellipsometry, XPS / AES as well as ICP-MS, particle analysis, sheet resistance probe analysis etc

As a Process Productivity Engineer at ASM, you will work with our customers as a system level expert focused on product support for new product development. This role will require 25-50% domestic and international travel (depending on product cycle).

Responsibilities: 

• Drives and owns top customer productivity issues (e.g., defect reduction, tool matching, tool availability, etc.) for products in the field across the product life cycle, from new product introduction through high volume manufacturing.  
• Interaction with Hardware, Electrical, Controls, Product Support, Process, and Software engineering teams to become the system level expert on new products transferred to the field. Become an expert on the interaction of the products with the customer processes and resulting tool productivity.
• Provides guidance to engineering during the design phase of new products on key customer requirements and needs, including productivity specifications (e.g., defects, tool matching, throughput, etc.) and process best practices.
• Designs and conducts experiments, in addition to measuring and interpreting experimental output, aimed at fulfilling stated objectives using Design of Experiments (DOE) and Response Surface Methodology (RSM).
• Troubleshoots equipment problems and is personally and actively engaged in problem via “hands-on” modalities.
• Owns marathon qualification of new processes and products in the development lab, including data collection, analysis, and improvement plans. Works closely with Process, Product Support, and Hardware engineering teams providing real time feedback of marathon issues and recommended solutions.
• Ensure processes follow best known practices throughout the product life cycle, from before the first eval shipment through the HVM ramp. Share and proliferate new solutions across internal teams, including Process, Product Support, and Field Support engineering teams.

Education and Requirements:

• Master’s or PhD Degree in Chemical Engineering, Materials Science, Chemistry, Physics, Mechanical Engineering, Electrical Engineering, or related degree.
• Hands-on and/or course work experience with hardware.
• Strong technical troubleshooting and root cause analysis skills.
• Demonstrated ability to characterize processes and/or hardware using first principles and experimental design techniques (e.g., DOE, RSM).
• High motivation, enthusiasm and curiosity to learn.
• Interested in working with new products, testing them and becoming a system level expert.
• Excellent verbal and written communication skills, with ability to clearly communicate advanced technical constructs in direct and concise manner.
• Statistical analysis and script writing in Python, Matlab, or similar is a plus.
• Ability to travel (domestic and international) 25-50%

We are seeking a highly motivated System Engineer to join our Sensor Technology Group, a dynamic team driving innovation in advanced sensor solutions for semiconductor manufacturing equipment. This role offers a unique opportunity to work at the intersection of mechanical, electrical, chemical, and materials engineering, contributing to the development of next-generation sensor systems that enable precision, reliability, and performance in semiconductor fabrication.

Responsibilities:

• Lead and support the design, integration, and validation of sensor systems within semiconductor equipment platforms.
• Collaborate cross-functionally with hardware, software, and process engineering teams to define system requirements and architecture.
• Develop and execute test plans to evaluate sensor performance under various operating conditions.
• Analyze data to identify trends, troubleshoot issues, and optimize sensor functionality.
• Drive continuous improvement in sensor system reliability, manufacturability, and cost-effectiveness.
• Support technology transfer from R&D to production, including documentation and training.
• Stay current with emerging sensor technologies and industry trends.

Requirements:

• Bachelor’s or Master’s degree in mechanical engineering, Electrical Engineering, Chemical Engineering, Materials Science, or a related field.
• 3+ years of experience in system engineering, preferably in semiconductor equipment or high-tech industries.
• Experience with system integration, data acquisition, and signal processing.
• Experience in tools such as JMP, Python, or similar for data analysis.
• Excellent problem-solving skills and ability to work in a fast-paced, collaborative environment.
• Strong communication skills and ability to present technical concepts to diverse audiences.

Preferred Qualifications:

• Relevant work experience in semiconductor equipment or a similar industry.
• knowledge of semi-conductor vacuum system, automatic wafer transfer (mechatronic: robotics, servo control, sensor and actuators) and integration into complex wafer processing system.
• Understanding of sensor technologies (e.g., thermal, optical, chemical, pressure, flow).
• Semiconductor related metrology knowledge (instrumentation to qualify & measure thickness, particles, electrical resistivity, etc.)
• Experience transitioning third party tools and service to in-house is particularly interesting

Job’s mission

What you will be working on

• Design and develop electromechanical systems integrating robotics with advanced control architectures.
• Implement visual-aided closed-loop control systems with real-time motion adjustment.
• Apply image processing algorithms using OpenCV, MATLAB, or similar libraries to guide robotic motion.
• Develop and tune servo control systems for precision and stability.
• Program and deploy control software for robotic platforms and embedded controllers (C/C++, Python, ROS).
• Develop, debug, and maintain PLC programs using Siemens, Allen-Bradley, or Beckhoff platforms.
• Collaborate with mechanical, electrical, and software teams for seamless integration.
• Participate in prototyping, testing, validation, and field deployment.
• Document system architecture, design decisions, and performance metrics.
• Provide technical support for troubleshooting and maintenance.

What we are looking for

• BS in Robotics, Mechatronics, Electrical Engineering, or related field with 12+ years of experience; MS with 8+ years; PhD with 4+ years.
• Proven expertise in control systems, including PID tuning, kinematics, and dynamic modeling.
• Hands-on experience with machine vision and image processing.
• Strong background in servo drive configuration and motor control.
• Proficiency in control software development for embedded and real-time systems.
• Experience with PLC programming and industrial communication protocols.
• Excellent problem-solving skills and ability to work independently or in teams.
• Strong communication skills for documentation and collaboration.

What sets you apart

• Familiarity with robotic frameworks such as ROS and tools like MATLAB/Simulink, LabVIEW, or TwinCAT.
• Knowledge of low-level communication interfaces (CAN bus, I2C, SPI, UART).
• Basic mechanical design principles and CAD tools.
• Experience with sensor integration (cameras, LIDAR, proximity sensors) and real-time data processing.
• Skills in actuator control and trajectory planning.
• Knowledge of semiconductor manufacturing processes and automation requirements.
• Experience with industrial robots or willingness to learn these applications.

As a Senior Mechanical Engineer for our Value Engineering team at ASM, you will play a pivotal role in enhancing aftermarket product value by refining designs, streamlining manufacturing processes, and reducing costs. This role is focused on achieving the ideal balance between functionality, reliability, and cost efficiency in a highly competitive, innovation-driven market.

Key Responsibilities

• Ensure quality of aftermarket parts by collaborating closely with suppliers, resolving issues related to parts falling outside of specifications, and working with Engineering to document and implement corrective actions.
• Engage with customers and local account teams to address field reported issues related to aftermarket part performance and quality.
• Lead and implement ASM process protocols, frequently reviewing and enhancing field service solutions.
• Manage Continuous Improvement Projects (CIPs) and ensure clear communication across teams and with external partners.
• Define project scopes, generate detailed reports, and track progress against timelines.
• Collaborate with global teams—including technicians, engineers, procurement, manufacturing, and management—to address project-specific requirements.
• Deliver reliable, high-quality solutions and develop new Best-Known Methods (BKMs) for field and customer use.
• Travel domestically and internationally as needed (10–20%).
• Maintain a strong commitment to safety in all activities.

Qualifications

• Bachelor’s degree in mechanical engineering or a related field
• Minimum 3 year hardware and process engineering experience within the semiconductor industry; strong understanding of semiconductor fab operations required; ASM specific experience desired
• Proficient in reviewing 3D CAD models and interpreting/redlining engineering drawings.
• Demonstrated ability in cross-functional communication, data analysis, and presentation; strong interpersonal skills for working with suppliers, internal teams, and customers
• Experience in executing Failure Analysis (FA), including planning, real-time reporting, and timely closure of corrective actions.
• Previous experience in Supplier Quality Control is a plus     
• Solid understanding of materials, including metals, plastics, coatings, and finishes.
• Knowledge of deposition technologies (CVD, ALD, EPI, PVD) is a plus.
• Proficiency in Microsoft Office, Creo, and AutoCAD; experience with FEA and CFD analysis is preferred.
• Strong understanding of ANSI Y14.5 standards for geometric dimensioning and tolerancing

In this role as a Senior Engineer, Surface Technology (Parts Coating) reporting within the Surface Technology Group, you will work with other ASM global technology team members including materials scientists, equipment engineers, process, quality and field service engineers as well as external customers to solve time critical or strategic technology challenges and develop unique advanced solutions in collaborative partnerships.

The position requires the individual to:

• Drive improvements in Thermal & Plasma Enhanced ALD system parts longevity, stability, refurbishment / service strategy and process performance to enable reliable and efficient deposition of a range of next generation advanced thin film materials exhibiting various electrical & physical properties.
• Work independently to develop new approaches to coat, protect and refurbish internal vacuum chamber components to improve performance, lifetime, defectivity and CoO for customers processing various materials for use as functional/active layers in semiconductor device stacks.
• Connect process conditions, physical characterization, and electrical response towards understanding of mechanisms.
• Specify, procure and develop state-of-the-art advanced process equipment.
• Formulate new protective and release coating formulations.
• Leverage advanced knowledge of various atmospheric & vacuum based etch & surface treatment approaches and utilize expertise in a range of surface / bulk characterization methods.
• Direct / manage projects & relationships with critical 3^rd party suppliers & supporting institutions.
• Have a passion for surface engineering processes, be inquisitive to drive projects & root-cause failure investigations whilst being systematic & entrepreneurial in mind-set.
• Demonstrate experience within a high volume semiconductor clean room environment.
• Be based within the ASM Phoenix AZ campus but open to occasional travel to additional global ASM, customer and supplier global sites when necessary.

Preferred Qualifications:

• Bachelors science degree ideally involving theory & practice of an appropriate thin film deposition technique whilst studying Materials Science, Physics, Chemical Engineering, Chemistry, Electrical Engineering or similar technical field.
• Minimum 1-5 years of experience in ALD (atomic layer deposition), PECVD (plasma enhanced chemical vapor deposition) or PVD (physical vapor deposition) technology,
• Expertise in coating equipment design and electro-mechanical development approaches highly advantageous.
• Experience using ASM EmerALD systems a plus.
• Solid understanding of Design-of-Experiments execution and statistical data analysis.
• Familiarity with common thin-film & chemical characterization & metrology techniques including: Optical microscopy, SEM, TEM, XRD, Ellipsometry, XPS / AES as well as ICP-MS, particle analysis, sheet resistance probe analysis etc.

• Ability to engage with customers both on a highly technical basis and personally.
• Ability to self-manage projects from conception to high volume production necessary
• Self-motivated, results-oriented with high commitment to work quality in a fast-paced environment.
• Proven ability to solve complex analytical problems and provide robust solutions based on solid technical background.