** This position is not eligible for visa sponsorship for external candidates. Candidates cannot require sponsorship now or in the future**

Job’s mission

Our Global Sales, Services & Spares IQ and Sustaining teams are seeking Snr Engineers I & II, Field Service (level will depend on experience, degree and responsibilities. Please review below) to join ASM at a customer site (TSMC) in North Valley, AZ. Domestic and International travel of at least 75% will be required for this role. As a Senior Field Service Engineer at ASM, you’ll play a critical role in supporting the advanced semiconductor equipment that powers the world’s most transformative technologies. You’ll take the lead on complex troubleshooting, guide and mentor engineers, and strengthen our partnerships by helping customers achieve stable, high‑performance fabrication environments. Your expertise will make a direct impact on tool reliability, customer satisfaction, and the next generation of ASM technology.

What you will be working on

Senior Engineer I, Field Service

• Install, maintain, and repair ASM semiconductor equipment with minimal supervision
  • Lead troubleshooting of complex tool or process issues using structured diagnostic methods
  • Perform root‑cause analysis and recommend targeted, data‑driven corrective actions
  • Review tool‑performance data to identify trends, risks, or improvement opportunities
  • Provide technical guidance and on‑the‑job coaching to less‑experienced engineers
  • Document service activities and support updates to procedures and best practices
  • Communicate solutions, progress, and expectations clearly with customer engineers
  • Participate in escalations alongside cross‑functional ASM engineering teams

Senior Engineer II, Field Service

• Serve as the senior technical lead for equipment installation, performance optimization, and recovery
• Diagnose and resolve highly complex, multi‑factor tool and process issues with limited guidance
• Lead advanced root‑cause analysis and drive long‑term corrective‑action plans that influence global engineering improvements
•  Own the customer‑technical relationship: build trust, anticipate operational needs, and act as ASM’s senior technical representative onsite
• Manage escalations end‑to‑end, aligning expectations, coordinating cross‑functional teams, and communicating clear action plans
• Guide, mentor, and develop engineers through hands‑on instruction, structured training, and knowledge‑sharing
• Champion best practices and contribute to procedure development, improvements, and field‑wide learning
•  Provide detailed field insights to R&D, product, and design teams, including support for beta tools or early‑option deployments

What we are looking for

Senior Engineer I, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 6+ years of experience, OR a Master’s degree with 4+ years of experience OR PhD degree with 0+ years of experience.
• Experience of semiconductor field service or capital‑equipment experience
• Ability to interpret electronic and electromechanical schematics
•  Experience with structured troubleshooting methodologies
• Knowledge of cleanroom and semiconductor safety protocols
• Strong written and verbal communication skills
• Ability to work independently and collaboratively in fast‑paced fab environments
• Willingness to travel domestically and internationally as needed for the role. 
• Proficiency in MS Office

Senior Engineer II, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 8+ years of experience, OR a Master’s degree with 6+ years of experience OR PhD degree with 4+ years of experience.
• Experience in semiconductor field service experience with demonstrated technical leadership
• Advanced knowledge of tool architecture, control algorithms, and multi‑factor troubleshooting
• Experience driving structured root‑cause analysis and long‑term corrective‑action plans
• Proven ability to lead escalations and manage customer‑technical relationships
• Strong communication and mentorship capabilities
• Ability to work autonomously while guiding and developing other engineers
• Willingness to travel domestically and internationally as needed for the role
• Proficiency in MS Office

What sets you apart

Senior Engineer I, Field Service

• Experience supporting beta tools or early‑option equipment
• Knowledge of wafer‑fab operations, robotics, vacuum systems, plasma, RF, or gas handling
• Experience writing or updating procedures or technical documentation
• Strong customer‑service approach and organizational skills
• Familiarity with structured problem‑solving methods

Senior Engineer II, Field Service

• Demonstrated leadership in complex troubleshooting programs or technical initiatives
• Experience owning customer‑technical relationships, including expectations and long‑term partnership building
• Strong capability in mentoring and developing field engineers
• Hands‑on expertise with fab robotics, vacuum systems, plasma, RF, or gas‑delivery systems
• Experience providing structured feedback to engineering or product teams
• Experience evaluating or supporting beta‑stage or early‑option tools

** This position is not eligible for visa sponsorship for external candidates. Candidates cannot require sponsorship now or in the future**

As a Field Service Engineer – Early Career, you’ll take on a hands-on role supporting ASM’s advanced semiconductor equipment and helping our customers keep their fabs running at peak performance. You’ll build real-world expertise through structured training, mentorship, and on-the-job learning while working directly with technologies that power AI, 5G, cloud computing, and next‑generation devices. This is your chance to apply your engineering background, strengthen your technical capabilities, and join a team that’s shaping the future of semiconductor innovation.

In this role, based in North-Valley/Phoenix, AZ at our customer site, you’ll launch your engineering career at the center of cutting‑edge semiconductor manufacturing. It’s an ideal opportunity for early‑career engineers who want to put their education into practice in a high‑tech environment where every day brings something new to learn.

From your first day, you’ll receive training through hands‑on guidance from seasoned engineers onsite. You’ll work with vacuum systems, plasma, chemical delivery, robotics, sensors, advanced metrology, and complex hardware‑software interactions. Your contributions will have a direct impact on tool performance, system uptime, and customer success—playing a meaningful role in enabling leading‑edge logic technology nodes. This experience lays a strong foundation for rapid growth, technical mastery, and a variety of long‑term career paths within ASM.

Shifts available:

Mon-Fri- 8am-5pm (subjected to OT)

What You Will Be Working On 

• Support installation, maintenance, and repair of ASM semiconductor equipment at customer sites 
• Troubleshoot equipment and process issues with guidance from senior engineers 
• Deliver clear, timely, customer‑focused support with a strong safety mindset 
• Working in cleanroom environments while following strict safety and quality standards.
• Assist in identifying and contributing to continuous improvement efforts  
• Participate in customer escalations alongside experienced team members 

What We Are Looking For 

• Bachelor’s or master’s degree in Electromechanical Engineering, Electrical Engineering, Mechanical Engineering, or related field 
• Candidates who are hands-on and mechanically curious, energized by complex systems and real-world problem solving, Comfortable working in fast paced, hightech environments & motivated to build a long-term engineering career. 
• Internship, co‑op, senior design project, lab research, or hands‑on technical experience 
• Ability to read and interpret basic electronic and electromechanical schematics 
• Understanding of safety protocols and willingness to work in cleanroom environments 
• Strong problem‑solving mindset and eagerness to learn 
• Clear communication skills and a strong customer-service mindset 
• Ability to work independently and collaboratively 
• Willingness to travel domestically and internationally 
• Proficiency with Microsoft Office 

What Sets You Apart 

• Demonstrated commitment to safety, quality, and disciplined execution 
• Exposure to semiconductor processes, wafer fabs, robotics, vacuum systems, plasma, or gas handling 
• Experience writing technical documentation in school or project settings 
• Familiarity with customer‑facing or support roles (internships, tutoring, help desk, teamwork) 
• Interest in structured problem‑solving methods, statistical methods, data analysis. 
• Curiosity and learning orientation when working with advanced semiconductor technologies 
• Participation in engineering clubs, competitions, or technical student groups 

Why join ASM? 

2026 is the year to join ASM as a Field Service Engineer. Apply now! 

As the Virtual Construction Field Engineer, you will support the Nox Innovations virtual design team and broader Nox Group construction installation teams with research and validation in the field. This will include design, trade coordination, layout, installation coordination, and validation.

Responsibilities

• Manage the Asset Routing submissions daily by
  • Providing support to the field on routing processes from Virtual Construction (VC) teams
  • Ensuring routing plans are reviewed and constraints are logged and followed up on by Nox Group’s field personnel and Virtual Construction.
• Coordinate & manage internal and external constraints during the modeling process by
  • Maintaining a daily VC constraint log
  • Coordinate constraint resolution
  • Attend VC internal and external coordination meetings to document and coordinate constraints and assist in coordination resolution
  • Monitor & share weekly constraint progression with the project & VC teams
• Assist with the constructability review in the field.  
• Assist the installation team with understanding the scope as needed
• Perform field validations of installation against the design to ensure the design is being followed and report any design to installation deviations to VC Project Engineer
• Provide total station layout points on site as needed.
• Assist installers with knowledge of how to understand and navigate the model and sheet sets, including PF part labels.
• Perform daily coordination between the VC Project Coordinator and the onsite field operations teams to ensure the model and design are aligned.
• Provide updates and support to the VC Project Manager to ensure continuity between the VC Engineers and the onsite Field Operations

Qualifications

• 5+ years’ experience in the construction field, electrical a bonus
• 2+ years’ experience in CAD
• Experience in Project Layout
• Ability to stand for long hours and walk job sites
• Ability to climb a ladder
• Ability to lift up to 45 lbs
• Excellent written and verbal communication ability
• Organized, systematic, and competent in performing detailed tasks
• Has a strong ability to be a team player and leader
• Self-starter and motivated to work efficiently and effectively
• Must possess outstanding interpersonal skills
• Cultural fit—ability to build positive working relationships

Education/Certifications

• High school diploma or G.E.D. equivalent

Safety Level
This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

• The inherent responsibilities of your role may include physical working conditions. In order to safely and successfully perform job duties you must be able to:  
  • Potentially lift up to 50 pounds 
  • Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing  
  • Potentially operate a motor vehicle, crane, tractor, etc.  
• We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance with the Americans with Disability Act (ADA)

#NXCLIND1 

How you’ll demonstrate Ownership

We are seeking an AI Platform Engineer to join the Cognite Atlas AI Product team in Phoenix, AZ, to engineer, build, and operate the production-grade, multi-cloud platform that enables our internal and partner teams to build, deploy, and manage industrial AI agents. You will be responsible for creating the core services, frameworks, and infrastructure for our "agent builder workbench" and agent runtime, focusing on scalability, reliability, cost-efficiency, and security. Your work will directly impact industrial efficiency and sustainability, which is critical to our mission of powering a high-tech, sustainable, and profitable industrial future.

The Impact you bring to Cognite

• Design, build, and maintain the core Python SDKs and services for the Atlas AI platform. Create clean abstractions that empower Solution Engineers to easily define and test agents and workflows.
• Build the core agentic runtime, ensuring it is scalable, meets its SLOs, and can reliably manage the state, orchestration, and execution of industrial agents.
• Develop a robust, governed, and secure framework for AI agent tool-use. Engineer the platform components that allow solution engineers to safely add new tools (e.g., API calls, database queries) and that manage the secure execution, monitoring, and access control for those tools.
• Manage the LLM serving layer, including deploying and optimizing models for low-latency/high-throughput inference. Build and maintain model routing logic to select the most appropriate model (e.g., performance vs. cost) for a given task.
• Implement evaluation and observability for all AI services. Create standardized frameworks for systematically evaluating the performance, accuracy, cost, and safety of LLMs and agentic workflows. Drive the implementation of robust, automated testing strategies for LLM-based systems.
• Own the full development lifecycle for services in a production SaaS environment. This includes establishing automated code coverage goals, rigorous code reviews, defining SLOs, participating in on-call rotations, and ensuring a fast and effective incident response process.
• Work closely with the Lead Architect to translate the technical vision into implemented, production-grade services. Act as a key partner for the Solution Engineers (your internal customers) to understand their needs and abstract common patterns into reusable, robust platform components.
• Stay up to date on the latest developments in the field, and mentor junior developers.

Required Qualifications

• Bachelor's or Master’s degree in Computer Science or a related field, or equivalent practical experience.
• 8+ years of professional experience in backend software engineering, platform engineering, or MLOps, with a proven track record of architecting and operating complex systems at scale.
• 2+ years of hands-on experience building applications or platforms on top of AI/ML models or LLMs.
• Expert-level proficiency in Python and a strong background in software architecture, robust API design, and building maintainable, well-documented SDKs for other developers.
• Hands-on experience with Kubernetes (K8s) and building services on managed PaaS in a multi-cloud environment (AWS, Azure, GCP). Strong understanding of Infrastructure as Code (e.g., Terraform).
• Proven experience building and operating production-grade SaaS software. Understanding of the full development life cycle, including CI/CD, monitoring, telemetry, and on-call incident response.
• Practical experience with LLM orchestration frameworks (Bedrock, Vertex, Semantic Kernel, LangChain).
• Strong verbal and written communication skills, with the ability to articulate complex technical designs and decisions clearly.

Preferred Experience

• Hands-on experience deploying and managing LLMs in production using high-performance serving frameworks.
• Experience with MLOps/LLMOps tools for tracing, monitoring, and evaluating LLM applications (LangSmith, Arize, Phoenix, or equivalent).
• Experience with RAG Infrastructure, embedding generation pipelines, vector database integrations, and high-performance vector similarity search APIs.

A snapshot of our many perks and benefits as a Cogniter

 

 

 

Learn more about us

 

 

 

• Impact 2025
• Cognite's Industrial AI: Moonshot
• We’re globally recognized domain experts with an international presence that spans Phoenix, Houston, Oslo Tokyo, Bengaluru, and Abu Dhabi.

 

 

Equal Opportunity

Cognite is committed to creating a diverse and inclusive environment at work and is proud to be an equal opportunity employer. All qualified applicants will receive the same level of consideration for employment.

Job's Mission:

As a Software Quality Assurance Engineer at ASM, you will ensure the reliability and effectiveness of our software that drives cutting-edge semiconductor processing equipment. You’ll work on testing and qualifying software, streamlining QA processes to align with CI/CD development, and collaborating with talented global teams. Your contributions will directly impact the functionality and performance of advanced hardware in the semiconductor industry.

What you will be working on:

• Design, develop, test, deploy, maintain, document, and improve software test suites.
• Perform both manual and automated testing in simulation environments and on physical semiconductor manufacturing equipment.
• Execute and analyze the functionality of engineering designs compared to intended outcomes, providing valuable feedback.
• Automate, streamline, and maintain QA processes to integrate seamlessly with CI/CD development workflows.
• Develop and implement quality standards, methods, and procedures to enhance existing business processes.
• Work closely with Process Engineering teams to test systems, validate engineering designs, and identify quality improvements.
• Create and manage tests plans and test cases, ensuring thorough validation of software enhancements and defect fixes.
• Gain an understanding of ASM system operations, including mechanical, electrical, and software functionality.
• Document testing procedures and feedback to ensure quality and consistency across projects.

What we are looking for:

• Bachelor’s + 5 years of experience, Master's +3 years OR PhD + 2 years of experience. Degree in Computer Science, Computer Engineering, or a related field.
• Proficiency in programming languages such as Python, C++, or C#.
• Experience with system quality assurance or engineering for complex electromechanical equipment with integrated software controls.
• Strong written and verbal communication skills for interacting with senior leadership and stakeholders.
• Willingness to travel up to 10% of the time.

What sets you apart

• Familiarity with tools like Jira, Confluence, Git, Test Complete, or TestRail.
• Experience in software configuration management or versioning in a software development environment.
• Knowledge of DevOps and CI/CD pipeline setup.

IT Infrastructure Engineer

Reports to: IT Infrastructure Engineering Senior Manager

FLSA Status: Full time

The Company

Meriton is a national investment holding company with a portfolio of companies in the commercial HVAC industry.  Founded in 2019, we believe merit has everything to do with standards and that nothing is beyond or beneath us.  We base those standards around a set of values that we hold tightly to, ensuring we are building the right thing, at the right time, with the right people.  We know that business is earned – never given – and that’s why we’re serious about what we do.  Working together, we’ll co-create lasting growth by defining big visions and hammering down little details.  Our resources streamline business processes and provide access to a network of teams with extensive industry experience.

The Opportunity

We are seeking a highly skilled and motivated IT Infrastructure Engineer to oversee the company's IT infrastructure, ensuring its stability and efficiency while engineering effective solutions.  This role combines hands‑on execution with engaging external technology partners, as needed, to help implement and embed our IT standards within a portfolio company.  The IT Infrastructure Engineer is also responsible for supporting gap assessments by identifying where a portfolio company does not meet a given standard and helping to address and close those gaps.  Additional responsibilities include building projects such as implementing audio visual solutions for conference rooms and other workspaces, meeting building security requirements including access control and camera systems, addressing low‑voltage needs, and installing network equipment, printers, and other technology equipment as required.  They possess excellent interpersonal and communication skills, both oral and written, and can articulate ideas to both technical and non-technical audiences. 

Responsibilities

• Engineer and maintain IT systems and infrastructure.
• Create and maintain IT infrastructure roadmaps.
• Research and evaluate new infrastructure technologies and services, performing PoCs and pilots where appropriate.
• Collaborate with DevOps, Service Delivery, and Cyber Security teams to design infrastructure that meets performance, reliability, and security requirements.
• Deliver internal training or knowledge sharing sessions on infrastructure tools and processes.
• Provide infrastructure impact assessments for proposed changes and new applications.
• Provide technical input on RFPs and vendor selection related to infrastructure services and solutions.
• Maintain awareness of emerging infrastructure trends and recommend adoption where beneficial.
• Participate in governance forums or CABs as needed to represent infrastructure interests and risks.
• Act as a subject matter expert for infrastructure topics to IT leadership and business stakeholders, advising on feasibility and risk.
• Assess, plan, and execute the transition of network infrastructure to align with company standards. This includes hardware, software, and network configuration.
• Work closely with internal and external stakeholders, including IT teams, vendors, and new company representatives, to ensure successful project execution.
• Identify and mitigate potential risks and issues related to the onboarding and transition process.
• Create and maintain comprehensive documentation for all projects, including project plans, network diagrams, system documentation, architecture diagrams, transition procedures, and standard operating procedures.
• Perform Layer 2 and Layer 3 network troubleshooting and optimization to ensure seamless communication across devices and applications.
• Coordinate with ISPs to address connectivity issues and oversee circuit upgrades or installations.
• Train end users in the use of equipment and software.
• Perform system administration for various enterprise tools and platforms.

Qualifications

• Minimum 5 years of experience in an IT services support role.
• Associate’s degree preferred.
• In-depth knowledge of network infrastructure, including routers, switches, firewalls, and wireless networks.
• Strong PowerShell experience preferred.
• Strong Office 365 administration experience preferred.
• Strong Azure and Windows Server experience.
• Strong knowledge of TCP/IP - LAN, WAN, wLAN and vLAN technologies.
• Strong knowledge of MS Active Directory infrastructure.
• Familiarity with IP Telephony and cell phone technology.
• iOS experience preferred.
• Excellent analytic and problem-solving skills.
• Capable of working independently with minimal supervision.

Additional Information

This position requires travel to Meriton locations and customer sites across the U.S.

This job description is not intended to be all-inclusive; employees may perform other related duties as negotiated to meet the ongoing needs of the organization.

Meriton is an Equal Opportunity Employer. 

We are seeking an R&D Metrology Engineer to join our dynamic materials development labs. The ideal candidate will be self-motivated, hands-on, and a resourceful problem solver with a strong understanding of materials characterization equipment and methods. In this role, you will work closely with ALD and Epi process engineers to develop and optimize next-generation materials for advanced node semiconductor processing.

This position requires working the early morning shift (1^st shift), including weekend coverage, to ensure optimal utilization and uptime of metrology equipment in a fast-paced R&D environment

Key Responsibilities

• Apply advanced metrology techniques to support the company’s materials and process development roadmap.
• Troubleshoot metrology equipment issues and collaborate with vendors to resolve hardware/software malfunctions.
• Partner with process engineers to select appropriate characterization methods and assist in data interpretation.
• Acquire and analyze metrology data; summarize findings for engineering and management review.
• Maintain tool uptime by partnering with vendors and supporting lab operations during off-hours.
• Train engineers on metrology tools, develop SOPs, and create recovery procedures for tool-down scenarios.
• Monitor uptime data; contribute to tool efficiency and continuous improvement initiatives.
• Develop metrology recipes and applications to streamline operations and solve technical challenges.
• Provide on-call support and ensure smooth lab operations during night and weekend shifts.
• Maintain LEAN 6S standards and contribute to a clean, organized lab environment.
• Stay current with industry trends by attending conferences, seminars, and workshops.

Required Qualifications

• Ph.D. in Materials Science and Engineering (preferred), or other engineering fields, Chemistry, Physics, Engineering, or related field.
• Hands-on experience with TEM, STEM, EDS, EELS, SEM, and FIB.
• Familiarity with techniques such as XRR, XRD, XRF, TXRF, FTIR, SPV, four-point probe, Hall effect, and defect inspection tools.
• Solid understanding of semiconductor processing and device fabrication.
• Proficiency in MS Office and JMP; strong data analysis and reporting skills.
• Excellent communication skills and ability to work independently and collaboratively.
• Availability for night and weekend support as needed.

Preferred Qualifications

• Experience developing metrology recipes and turnkey solutions.
• Background in lab operations and equipment maintenance.
• Programming experience, particularly in scripting or automation for data acquisition, data analysis, and tool control.

The Maneuver Dominance team at Anduril develops operationally relevant, multi-asset autonomy. We are focused on building the next generation of autonomous capabilities by leveraging existing Anduril platforms like Ghost or Altius, bringing 3rd party platforms into Anduril's Lattice ecosystem, and developing breakthrough systems that will shape the future of the battlefield. If you are interested in working in an extremely innovative and fast paced environment, where your work directly makes an impact and difference in the products that are fielded this a fantastic opportunity.

As an Aviation Maintenance Engineer you will ensure the airworthiness and mission readiness of developmental UAS platforms across assembly, maintenance, and flight test operations. You will work alongside a team of engineers, test pilots, and test specialists, contributing hands-on mechanical expertise to aircraft assessment, maintenance coordination, and reporting on all facets of aircraft readiness. This role is central to enabling safe and efficient developmental flight test under both civil and military approval frameworks.

What You'll Do

• Assist with many aspects of aircraft assembly, planned and preventative maintenance, and operation including mechanical integration (flight control surfaces, propulsion), composites fabrication, and avionics build/integration/test.
• Troubleshoot, repair, and maintain aircraft and subsystems including landing gear, fuel system, flight control, and propulsion.
• Perform common airframe construction techniques.
• Complete aircraft and equipment documentation.
• Troubleshoot, repair, and maintain site support equipment.
• Communicate mechanical assessment with engineering and production.
• Perform validation and testing of various electronic components using equipment such as multimeters, oscilloscopes, network analyzers, and test racks.
• Perform proper FOD and tool control practices.

Required Qualifications

• 5+ years rotorcraft experience.
• Valid FAA Airframe & Powerplant (A&P) license.
• Excellent communication and teamwork abilities.
• Proficient with computer use (standard browser, word processing applications).
• Willing to be multi-capable, including some electronics troubleshooting and repair.
• Strong problem-solving skills and attention to detail.
• Ability to rapidly change roles/responsibilities while working in a fast paced, challenging work environment.
• Willing to travel international and domestic on an as needed basis.

Preferred Qualifications

• US security clearance eligible.
• Experience with both electric and turbine power plants.

About the Role

The Revenue Operations team at Gusto is a full-stack team responsible for data, analytics, and operational excellence in pursuit of scaling our revenue growth. The Go-To-Market Analytics team is one functional area, responsible for defining and owning the metrics for scaling our Sales teams. 

Gusto is looking for a Revenue Analytics Engineer to build and maintain foundational data infrastructure that is crucial to growing and scaling our Sales efforts. In this role, you will partner with our GTM analysts to scope and deliver data products for an audience ranging from company and revenue leadership to operational and frontline sales. In doing so, you will own significant portions of our sales data from end-to-end, focusing on the transformation, design, and visualization workflows. In addition, you will establish best practices for systems design and workflows to maximize usefulness of AI at scale. 

This role will report to the Head of Go-To-Market analytics, and partner closely with Data Science, Data Platform, and Business Technology teams. 

Here’s what you’ll do day-to-day:

• Establish relationships with internal stakeholders to determine business needs, scoping and delivering solutions through data products
• Design, build, and maintain data pipelines and dashboards to automate “keep the lights on” work out of manually-managed processes
• Build a data foundation by incorporating business logic into raw data tables, laying the groundwork to enable value-add insights
• Create a dynamic reporting environment based on stakeholder needs
• Identify data discrepancies and set best practices for data logic to create a clean and well-documented environment
• Collaborate with broader data organization as steward to the definition and process management of core Gusto metrics

Here’s what we're looking for:

• Education or work experience in Engineering or Computer Science, or a related technical field 
• 7+ years of experience in an analytics engineering, business intelligence, or technical data analytics role
• Experience with SQL and ETL optimization techniques, especially within cloud-based data warehouses like Redshift, Snowflake, etc.
• Command-line experience and familiarity with version control collaboration tools (git)
• Experience with data pipeline management technologies with dependency checking, such as Airflow, as well as schema design and data modeling tools (dbt)
• Experience with data visualization technologies, e.g., Tableau, Looker, Sigma, Mode, Hex
• Experience with Python and data ingestion tools
• Ability to problem-solve open-ended problems and project manage dependencies and timelines to optimal outcomes
• Ability to demonstrate tools, business intuition, and attention to detail for data validation and QA 

Our cash compensation amount for this role is targeted at $138,000-156,000 in Denver & most remote locations, and $168,000-189,000 in New York & San Francisco Bay Area. Stock equity is additional. Final offer amounts are determined by multiple factors including candidate experience and expertise and may vary from the amounts listed above.

Location

This role requires working from our downtown Toronto office 4 days/week (Mon, Tues, Thurs, Fri). Candidates must be based within a 50-mile commuting distance of the office.

About the Role

At Opendoor, AI isn’t a side project - it’s how we work. Across the company, teams default to AI to solve problems, ship faster, and remove friction from everything we do. You will help define the future of how we work by building AI powered workflows, automation, and experiences that drive leverage across Finance — spanning month-end close, SEC Reporting, FP&A, Technical Accounting, Tax, Procurement, Accounts Payable, and Payroll. This is high agency work in high ambiguity - turning messy problems into clean solutions, prototyping fast, and shipping.

You'll make systems design and tooling decisions that affect how our Finance operations scale – so we need people who think critically about what and why they build, the impact it will have on our team, and how to measure success. 

We're looking for AI-native builders who know how to automate complex operational workflows. The accounting and finance domain knowledge can be learned — what matters most is that you're wired to build, that you default to AI in how you approach problems, and that you can map messy business processes into clean, automated systems. 

Why Join Us

• Build AI automation for our Financial Operations from the ground up
• Work on cutting-edge systems directly impacting key Finance processes in a public company 
• Collaborate with talented engineers and finance team members
• Access to enterprise AI tools — Claude Code, Cursor, and LLM APIs. We invest heavily in AI infrastructure so you can build and experiment.

What You'll Do

This is a hands-on individual contributor role. You will design, build, and ship automations — not just evaluate tools or write strategy decks.

• Turn complex Accounting and Finance problems into clear system designs, experiments, and implementation plans
• Build and maintain AI-powered automation that improves operational efficiency, accuracy, and scale across Finance functions
• Automate workflows (journal entries, reconciliations, flux analysis) using SQL, Python, and agentic AI
• Maintain clean, auditable data throughout automated workflows, with dashboards and controls that support both operational and compliance needs
• Partner with the internal SOX team and external auditors to ensure automated processes meet compliance standards and are well-documented
• Build and scale AI literacy across the Finance team through runbooks, documentation, best practices, and hands-on training 

What You'll Bring

• At least 5+ years of work experience building automation, operational workflows, or data systems in any industry. 
• Familiarity with LLM deployment, context engineering and comfortable writing SQL or Python code
• Understanding of machine learning lifecycle concepts: training, evaluation, deployment, monitoring

Systems Thinking: You understand how data flows through operational systems. You can look at a business process, identify the inputs, outputs, dependencies, and failure modes, and design automation around it.

System Design: You take complex, messy problems and reduce them to simple, durable architecture. 

Communication: Articulate problems clearly to both technical and non-technical audiences. You write clean documentation, build dashboards that tell a story, and can walk a stakeholder through your design rationale.

AI Alchemy: You have high agency and a tinkering mindset. You default to experimenting, running variations with new tools and methods - LLMs, automation platforms, coding assistants until you can transmute data into high quality results. You're comfortable writing SQL code, working with APIs, and stitching tools together to ship solutions fast.

Impact Driven: You optimize for impact over novelty, choosing the right tools for the job and ensure performance, scalability and resiliency.

Bonus if you have:

• Experience in Accounting or Finance 
• Comfort working in regulated or compliance-sensitive environments

Tools and Technologies

You'll work across a range of tools and we expect this list to evolve. Ideal candidates will have experience with the following tech stack:

• AI coding assistants: Claude Code, Cursor, or similar 
• Workflow automation: Gumloop or similar platforms
• MCP integrations
• Agentic AI frameworks or building automation flows 
• Data / ERP platforms: Snowflake, NetSuite, Ramp or similar 

Note: Opendoor provides enterprise-level access to all AI tools listed above. Our engineers currently consume billions of AI tokens per month across the company and are not constrained by token limits or personal account restrictions.

Compensation

Our compensation plan consists of a base salary and Opendoor equity  in addition to a comprehensive package of benefits including paid time off, paid holidays, medical/dental/vision insurance, basic life insurance, and 401(k) to eligible employees.  All compensation parameters are based on experience.

 #LI-DM

#LI-Onsite

Role overview

As a Senior Process Engineer at ASM, you will work with semiconductor processing and analytical equipment to research, develop and optimize processes focused on oxidation, annealing, curing, Atomic Layer Deposition (ALD, PEALD), Epitaxy or PECVD for logic, memory, analog, power, and MEMS applications. You will design and conduct complex experiments, measurements and perform the interpretation of complex experimental output. While you deliver creative and inventive solutions, technical publications, and generation of Intellectual Property (IP) are an essential function of this position. 

Note: This role is intended for candidates who are graduating in Spring 2026 or have graduated within the past two years and have 0–2 years of professional work experience.

Responsibilities 

• Creative problem solver with experience in developing new films for emerging applications and experience in chemistry/materials characterization.
• Works with semiconductor processing equipment to research, develop and optimize unit processes focused on the deposition of metal and dielectric films via ALD, PEALD, Epitaxy, and/or PECVD.
• Bringing innovative ideas, staying abreast of state-of-the-art processing applications in the semiconductor industry to be effective.
• Process consulting and accountability including technical papers on advanced process applications and Intellectual Property creation.
• Participates in and drives technical problem-solving sessions using the related scientific method and industry tools, such as Ishikawa diagrams.
• Designs and conducts experiments, in addition to measuring and interpreting experimental output, aimed at fulfilling stated objectives using Design of Experiments (DOE) and Response Surface Methodology (RSM).
• Troubleshoots equipment problems and is personally and actively engaged in problem via “hands-on” modalities.
• Works with customers and central marketing to understand and define requirements to successfully execute and document customer demonstrations.
• Develops methods and techniques for integrating metal and/or oxide films into existing and future device technologies.
• Ensures successful product transfer to customer base by performing demonstrations, training field service personnel, traveling to support remote sites (up to 10% travel required), and drafting documentation regarding process development, tool operation and maintenance.
• Produces technical papers on process, equipment, and device integration improvement strategies and presents to professional audience.
• You may be assigned supervisory duties over supporting process engineering technicians and aides. These supervisory duties could include direct input into employees’ performance evaluations, discipline, and discharge.

Minimum Qualifications

• We are looking for candidates who have graduated within the last 0-2 years or will graduate in Spring or Fall 2025 and are eager to begin or advance their career.
• Master’s or PhD degree in Chemical Engineering, Materials Science, Electrical Engineering, or Physics.
• 0-7+ years of combined education, research, and work experience with:
• Cure, oxidation, ALD, CVD, Epitaxy, PECVD and/or other thin film deposition.
• Materials characterization techniques such as XPS, SIMS, RBS, AFM, XRR, XRD, TEM, SEM and ellipsometry.
• Knowledge of electrical characterization techniques for CMOS devices.
• Application of dielectric and/or metal films for logic and memory structures.
• Training in CFD (computational fluid dynamics), either theoretical or practical is preferred.
• Knowledge of electrical characterization techniques for CMOS devices is preferred.
• Graduating in Fall 2025 or graduated within the past two years.
• 0–2 years of professional work experience.

Preferred Qualifications

• Ability to independently manage complex process development projects, including personnel, project schedules, experimental thrusts, hardware procurement and budgetary oversight.
• Ability to be a process consultant to internal and external customers.
• An authority on interplay between hardware design (e.g., chemical reactor design) and operation and process outputs
• Understanding of requirements for integration of metals as work function materials and barrier layers in FEOL and BEOL process flows
• Demonstrated ability to develop and completely characterize deposition processes using first principles and experimental design techniques (e.g., DOE, RSM).
• Experience with the theory, practice, and interpretation of materials characterization techniques such as XPS, SIMS, RBS, AFM, XRD, HRTEM, FESEM, Auger, Raman and ellipsometry.
• Excellent verbal and written communication skills, with ability to clearly communicate advanced technical constructs in direct and concise manner.

Who Are We Looking For?
Vestwell is looking for a dedicated and self-motivated Senior People & Workplace Experience Partner to join our People Team. We are building a team of world-class talent and are looking for a strong partner who can collaborate with multiple internal teams and stakeholders. You will provide comprehensive support in the day-to-day operations of the people team, ensuring the efficient delivery of new employee orientation and onboarding, the accuracy and maintenance of employee records, and work closely with other departments to provide customer-focused, effective People service to the organization for the achievement of the organization’s goals and objectives. You will also ensure that all office administrative activities are efficiently handled, including supply and equipment management, file management, administrative support, and related activities.

As Senior People & Workplace Experience Partner, you will have a front row seat and a direct impact on the next phase of our growth. Our ideal candidate is passionate about innovation, embodies our Vestwell Core Values, and takes initiative to ensure the well-being and growth of our employees.

What Will You Be Doing?

People Business Partnerships

• Manage core People Operations functions, including onboarding, offboarding, and time off administration
• Support employee relations discussions in partnership with the People Partner Team, guiding internal conversations, mitigating risk, and resolving conflicts
• Support the deployment of various People Team policies, procedures, and initiatives, including but not limited to performance management, internal mobility, recruitment and hiring needs, compliance and learning and development.
• Maintain compliance with local, state, and federal employment laws and regulations
• Ensure accuracy and integrity of employee data and internal documentation across People systems (e.g., Rippling, Sparrow, Envoy)

Workplace & Office Operations

• Oversee day-to-day office operations, ensuring a seamless and productive workplace experience for employees across hybrid and in-office environments
• Partner with Workplace Experience to manage office vendors, supplies, seating, and space planning to support team growth and collaboration
• Coordinate and execute in-office events, team gatherings, and employee engagement initiatives that promote Vestwell’s culture
• Act as the primary point of contact for office-related needs, including facilities issues, employee requests, and general workplace support
• Support budget tracking and expense management related to office operations, vendors, and employee experience initiatives
• Collaborate with leadership to continuously improve the in-office experience and align workplace operations with employee needs and company growth

Requirements

The Necessities

• 4-6 years of Human Resources / People Operations experience, preferably at a high-growth tech company/start-up
• Experience building, maintaining, and presenting HR data analytics
• Ability to manage both operational/administrative and strategic people team initiatives
• High emotional and social intelligence with experience fostering positive, strong relationships with diverse groups of people
• Excellent verbal and written communication skills that demonstrate a high level of professionalism
• Highly organized and detail-oriented; you can handle multiple projects and dynamic priorities without missing a beat
• Passionate about people and how they function together to create a valuable organization

The Extras

• Experience working in a high-paced startup environment or SaaS environment
• Prior experience using Rippling
• Experience supporting a hybrid team 

This role will be based in our Phoenix office and will be part of Vestwell's hybrid in-office operation.

The expected base salary range for this position is $95K - $110K base. This position is eligible to participate in the Company Bonus Pool and is eligible to receive new hire equity in the Company. Please note that salary bands are based on NY and other similar metro areas and may differ based on where the role is ultimately hired.

About the Role

The Ground System Deployments team is looking for an innovative, collaborative and self-driven Civil Project Engineer to join the team to ensure the successful deployment of Zipline’s Ground Systems in all possible applications and configurations. 

This role is well suited to seasoned civil engineers looking to apply their experience designing novel and innovative sites, foundations and structures to advance and accelerate the new and growing industry of  autonomous drone delivery ground systems. 

With broad scope to influence the design of current and next generation systems this role will jopin a stellar team responsible for the site level designs, layouts, civil designs, structural and foundation designs and implementation. Interacting with various mechanical, structural and electrical engineering stakeholders across the organization this role will  ensure the overall system and its site design work hand in hand to ensure the successful deployment of Ziplines Ground Systems within cost and timeline goals. 

This role has a mandate to drive positive change through the organization - as problems or scenarios occur this individual will be tasked with both 0 to 1 problem/project responsibility and also working with the broad engineering and deployments organization to implement foundation changes to product and process as needed. 

This position can be based out of our San Francisco, Dallas or Houston Offices. Onsite is preferred, but this role can be remote flexible with up to 50% travel for the right candidate.

WHAT YOU’LL DO

• Act as the Civil Engineer of Record for Zipline projects in Texas and other jurisdictions
• Create, refine and update civil layouts for the sites. Act as the Zipline representative for any technical clarifications from cities or jurisdictions regarding our designs. 
• Contribute to the civil and site design standards of Zipline sites. 
• Contribute to the pavement, drainage, and sitescape designs and approaches of Zipline sites and structures. 
• Advise on permitting, codes and and other certification efforts relevant to the projects and structures.  
• Engage and interact with cities and relevant inspectors or relevant external parties to ensure timely project approvals and deployment. 
• Ensure relevant and applicable civil strategies are investigated and implemented where appropriate - grading designs, curb designs, pavement designs
• Understand our internal and external customer’s business and needs and work with our internal engineering and business teams to refine and roadmap necessary changes to ensure the successful deployment of the Ground Systems infrastructure. 
• Source and develop relationships with outside organizations (local jurisdiction, utilities, contractors, OEM and material suppliers etc).
• Evaluate all options and a lean budget, select best vendors to ensure reliable and quality services and products.
• Understand and mitigate the preconstruction, construction, operational and sustaining  risks associated with each project. 
• Interact directly with internal and external partners and stakeholders as needed. 
• Domestic travel to project sites expected on an ad-hoc basis. 

WHAT YOU’LL BRING

• Civil Professional Engineering qualification with stamping capacity in Texas (or the ability to quickly obtain stamping capacity in Texas). Ability to stamp in Arizona and other sunbelt states a strong preference, or the ability and capacity to quickly gain this qualification. 
• Bachelor's degree or higher  with minimum 6 years of experience.
• The individual should have an Engineering background (Civil, others acceptable with relevant experience and stamping capacity) and have worked in the construction, electrical design/EPC, or renewable energy industry, or equivalent industries for 4+ years. The individual should have experience (4yrs+) in working with:
  • Civil codes and building standards, and applicable design and management software.
  • Technical Product Management, Technical Program Management or applicable areas.
  • Systems engineering and  system architecture.
  • External design teams (Architectural, Structural, Civil,Electrical MEPs) on commercial or industrial development  / construction projects.
  • Experience with automated logistics, UAV aviation, EVSE Charging, Renewable Energy and Battery Energy Storage Systems or equivalent industries a plus. 

• Strong candidates should have excellent communications skills to:
  • Drive internal alignment of requirements for projects based on business needs.
  • Provide leadership team with updates on scope, schedule and budgets. 
  • Drive external parties for the implementation of real estate projects. 
• Must be eligible to work in the US.

What Else You Need To Know

Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws or our own sensibilities.

We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply!

Position Overview

Woolpert is hiring a Program Director for the Mission Critical team. The Program Director must be a licensed Architect or Engineer and is primarily responsible for sales and growth within the Mission Critical practice area through the establishment and improvement of client relationships. This position is also responsible for working across practice areas and service lines to develop business opportunities and ensure services are performed in a manner compatible with the goal of being an industry leader. This position reports to Mission Critical Market Director.  

We are unable to provide visa sponsorship for this position. Applicants must already possess work authorization in the country the job is located.     #LI-SN1

What You Will Do:

Business Development  

• Build and enhance existing client relationships to identify and initiate additional project opportunities within a client base for the service line, practice area and firm. 
• Identify and build new client relationships that match the client and project type focus and overall business strategy of the service line and practice area. 
• Promote SNHA (a Woolpert company) as an industry leader for specified market/practice and service(s) with new and existing clients. 
• Early project feasibility and strategic design input. 
• Collaborate with the MC Market Director and Building Sector Leader to define the EU market sales goals. 

Collaboration and support 

• Mentor and assist project managers in negotiating project schedules, fees, scope and contract terms.  
• Work with Project Managers to identify, address and resolve any project issues impacting client goals, objectives and/or client satisfaction.   
• Define and communicate client needs and expectations. 
• Ensure continuous stakeholder (client, client’s manager, etc.) communications addressing, resolving, and anticipating project issues. 

What You Will Bring:

Qualifications and Experience 

• BA/BS or MA/MS in Architecture, Mechanical Engineering, Civil Engineering, Electrical Engineering or similar field of study required. 
• 15 or more years of related experience in the Mission Critical Datacenter industry
• Current Professional Registration  
• Office 365: Word, Excel, Teams, SharePoint, Outlook, PowerPoint, basic AutoCad and Bluebeam (Essential). 
• Ability to travel within reason to meet the needs and demands of the practice area 

General Aptitude 

• Ability to make sound decisions/recommendations based on the evaluation and synthesis of information and data. 
• Demonstrates an enterprising, innovative, proactive management approach. 
• Possesses high levels of demonstrated leadership ability. 
• Ability to research and define multiple project scopes, schedules, and budgets. 
• Ability to establish and maintain rapport with clients, vendors, management and employees. 
• Possesses strong negotiation and problem-solving skills.  
• Possesses excellent facilitation and/or meeting skills.  
• Possesses excellent presentation and communication (oral and written) skills. 
• Strong understanding of project management and ability to facilitate technical discussions when needed.  
• Strong organizational skills to successfully manage multiple, competing priorities.
• Engaging with good interpersonal skills.

Benefits You Will Love

Certified as a Great Place to Work, Woolpert is one of the fastest-growing architecture, engineering, and geospatial companies in the world. With over 75 offices and countless projects around the globe, you’ll work on meaningful assignments that improve quality of life around the world. In addition to offering competitive pay, we provide employees with a robust set of unique benefits, including:

• Freedom to Work program: Set your own schedule and location (as appropriate).
• Principal program: Earn the opportunity to become an owner of the firm.
• Flexible paid time off/vacation: Take time off when it makes sense for you and your team.
• Career development: Explore a wide range of learning and growth opportunities within and across industries.
• Health, life, vision, and dental insurance: Cover all your medical bases.
• Paid sick time, retirement plan, fitness reimbursement, pet insurance, identity protection, technology stipend, employee assistance program, and more!

Our Mission: 

To actively connect people to their next great opportunity. 

Who We Are: 

ZipRecruiter is a leading online employment marketplace. Powered by AI-driven smart matching technology, the company actively connects job seekers with millions of businesses of all sizes through innovative mobile app, web, and email services, as well as partnerships with the best job sites on the web. ZipRecruiter has the #1 rated job search app on iOS & Android. 

Summary of Job

The internal title of this role is referred to as a Product Strategist at ZipRecruiter. The requirements and responsibilities align with a sales engineer role.

The product strategist will work directly with assigned Enterprise sales teams as a strategic partner throughout the client lifecycle. This partnership will increase probability of winning new deals or deal renewals, increase Enterprise client retention, and accelerate sales revenue growth.

Key focuses:

• Integral part of the pre-sales and process for key accounts, meeting with customers on calls and in-person, as needed to perform Discovery
• Develop rapport as a product and industry expert, both internally and externally
• Lead technical and complex discovery to ensure we have a holistic and accurate understanding of a customer’s needs/challenges and requirements
• Lead the design of deal strategy, pricing, and proposal
• Analyze industry and performance data to develop data-driven client narratives
• Share insights and recommendations internally with marketing, product, operations, finance, sales and leadership

Minimum Requirements:

• 5+ years experience in a client-facing role with Fortune 1000 companies
• Excellent communicator with strong skills to effectively write, speak, educate, and persuade at all levels
• Expert problem solving backed by innate curiosity
• Adept at writing documentation, presenting strategy, and communicating technical concepts to non-technical team members
• Data-driven mindset to help our customers understand how to think about performance
• Proven ability to lead teams and work cross-functionally in a highly collaborative environment
• Strategic thinker with strong project management skills
• Consultative approach to selling
• Highly analytical
• Data-driven storyteller
• Experience in Job-advertising or Digital-advertising industries highly favored
• Detail-oriented, organized, and strong time-management skills
• Ability to learn quickly, adapt to feedback, and work in a rapidly changing environment
• Easily builds rapport and establishes relationships with customers and colleagues
• Listens patiently, probing for and clarifying to get necessary details
• Excellent problem-solving skills working in ambiguity and limited direction
• Advanced knowledge of Google G Suite and MS Office Suite (Word, Excel, PPT)

As part of our team you’ll enjoy:

• Competitive salary
• Exceptional benefits package
• Flexible Vacation & Paid Time Off
• Employer-matched 401(k) plan 

Category: Sales & Biz Dev

#LI-Remote

The US base salary range for this full-time position is $125,000. Our salary ranges are determined by role, level, and location, and the range displayed on each job posting reflects the minimum and maximum target for new hire salaries for the position across all US locations. Within the range, individual pay is determined by work location, role-related knowledge and skills, depth of experience, relevant education or training, and additional role-related considerations.

Depending on the position offered, equity, bonuses, commission, or other forms of compensation may also be provided as part of a total compensation package, in addition to a full range of medical, financial, and other benefits.

As a Principal Engineer, Global Product Management at ASM, you’ll have the opportunities to get involved in a wider scope of work compared to our larger competitors. While the workload is challenging, you are given the independence and autonomy to perform at your peak. This work requires being innovative, so you must have the ability to collaborate with others to deliver creative solutions, work well under pressure and pay great attention to small details.

This position is responsible for product management & technical marketing activities within the Product Management group. Every day is different, working with different customers and different products. This role is for someone who enjoys and is intellectually curious about the whole process and being part of it. You get to work external global customers that have many different needs and you will be part of the solution.  

Key Responsibilities:

• Product Life Cycle – Drive the product life cycle from concept to high volume manufacturing to obsolescence
• Roadmaps – Maintain product roadmap for a portfolio of products, periodically update roadmap through discussions with customers and internal experts, align product priorities and resources to roadmap
• Customer Engagement – Support Technical Meeting with customers, create and manage customer presentations, detailed market and competitive analysis
• MRS – Own the market requirement spec documents and ensure product development priorities align with MRS and customer needs
• Strategic Marketing – Prepare market strategies for executive R&D expenditure requests, develop roadmap and product strategy presentations for executives within ASM
• Financial – Work with finance department on NPV and IRR for products, maintain cost of ownership models
• Business Planning and Market Analysis – Attend company operation/planning meeting, create Business plan/Operation review materials, create business forecast based on market information, support budget planning, competitive analysis
• Drive teams internally to meet set products profit gross margins
• New Product Introductions – Detailed market analysis for inflections, development of business plans, internal executive alignment, positioning of products
• Support technical activities – Work with product development teams on specifications and data collection requirements, manage customer demo requests, prioritization of product development activities
• Supplier Engagement – Develop key capabilities for new products through collaboration with suppliers
• Product Promotion – Create promotional materials for conferences and launches, Sales and product support training, Introductions to Customer

Requirements:

• 10+ years of semiconductor / capital equipment industry experience, of which a significant portion has been in technical marketing and / or product management roles
• Masters or PhD in Material Science, Electrical/Chemical/Mechanical Engineering or equivalent
• Process, hardware, or device experience in semiconductors or capital equipment
• ALD or CVD experience is a plus
• High level of proficiency or deep understanding of capital equipment systems in semiconductor or similar industry
• Direct customer engagement or supplier management
• Ability to work with multiple internal disciplines on portfolio of products
• Understanding of product life cycle and technical marketing
• Ability to travel globally

Overview

Changing the world of luxury electrified mobility needs great people who like to have fun and achieve results as a team. As part of this journey, we are currently seeking a Staff Program Manager, Vehicle Programs with end-to-end vehicle development experience and demonstrated ability to excel in a fast-paced environment, drive cross-functional alignment across Engineering, Manufacturing, Design, and Finance and apply the appropriate level of urgency to advance our vehicle line program deliverables. This role will lead operational delivery across current and future model years, ensuring technical maturity, timing discipline, and financial stewardship. This person will be based at our Phoenix, AZ, Casa Grade, AZ or Southfield, MI location.

Responsibilities

• Lead the cross-functional vehicle product development process from conceptual design phase to market introduction for existing or a new vehicle line 
• Translate product strategy into executable program plans, ensuring alignment with Manufacturing, Quality, Sales, Marketing, Powertrain, Engineering, Digital, Homologation and Finance to prioritize features, timing, resource allocation and investment decisions.
• Own and proactively manage the technical product description, evaluate design and engineering decisions with the Program Chief Engineer, ensuring feature maturity, integration readiness, and compliance with vehicle-level performance objectives.
• Be responsible for key vehicle financial and budgetary activities including the costed bill of materials, the program prototype budget, PMO budgets (headcount, expense, etc.) and resource allocation 
• Coordinate build configurations and review vehicle test plans with the cross-functional teams to ensure readiness for vehicle production and build volumes meet product development requirements  
• Proactively evaluate design and engineering decisions with the Program Chief Engineer, making sure they don’t cause any gap in correlation with the program schedule, budget and scope
• Track and manage program performance, using metrics on timing, cost, mass, feature readiness, and quality to drive transparent weekly reporting and executive reviews.
• Proactively identify and mitigate key program risks and possible deviations related to e.g. product architecture or any other required technical changes, ensuring proactive resolution of design, supplier, or manufacturing issues that could impact cost, quality, or launch timing
• Design and implement effective program management processes incl. configuration management, issue tracking and change management, embedding lessons learnt and best practices from initiation to completion.

Qualifications

• 8+ years of experience in technical leadership, system engineering and/or technical program management 
• 10+ years of professional experience in the automotive industry 
• Experience leading a whole vehicle program from concept to launch
• Strong organizational skills, attention to detail, and a proven ability to take ownership of technical product descriptions and schedules, consistently delivering projects on time  
• A proven track record of development and delivery of technical product  
• Wide experience in automotive hardware development, including integration and validation  
• Familiarity with systems engineering and project management principles  
• Experienced with project management tools like Jira, Confluence, and Smartsheets  
• Excellent communication skills at all organizational levels  
• Proficient in root-cause analysis and evaluation of engineering decisions  
• Ability to travel as needed 

Education 

• Bachelor's degree in an Engineering discipline or equivalent work experience. Master's degree preferred.

Overview

Changing the world of luxury electrified mobility needs great people who like to have fun and achieve results as a team. As part of this journey, we are currently seeking a dynamic Program Management professional that can demonstrate an ability to thrive in a fast-paced environment, work independently, and apply the correct level of urgency to advance our vehicle line program deliverables. This person will be based in our Phoenix, AZ location.

• Serve as a key member of the vehicle line program management team, contributing from the conceptual design phase through to the start of production for a new vehicle line.
• Manage the technical product description, including hardware and software features, ensure they are developed on time and meet system design specification, mechanical packaging, unit testing, verification, integration and validation process needs. 
• Identify, assess and mitigate program risks by working with cross functional teams across the company such as engineering, enterprise and operations.
• Lead efforts to align build configurations and vehicle test plans with the cross-functional teams to ensure build volumes meet product development requirements. 
• Execute cross-functional system release plan, including requirements from areas such as product marketing, product management, software integration, infotainment system, ADAS etc. 
• Design and implement effective program management processes and best practices from initiation to completion in partnership with hardware, software and manufacturing teams. 
• Execute solid root-cause analysis with the ability to identify and predict possible deviations related to product architecture or any other required technical changes to meet program goals.
• Proactively evaluate design and engineering decisions with the Program Chief Engineer, ensuring that there are no discrepancies in the correlation with the program's schedule, budget, and scope.
• Ensures on time execution of engineering change requests across various HW and SW teams by working closely with supply chain, engineering and NPI. 
• Expedite revisions, corrections, and implementations of necessary changes to previously published documentation with the cross-functional teams. 
• Manage critical program databases including confluence pages and Kanban boards to ensure information cascade and accuracy. 
• Foster strong cross-dimensional partnerships and effectively prioritize workload demands to meet project deadlines. 

• Solid understanding of automotive systems, HW & SW development cycles and manufacturing processes. 
• A proven track record of product development and on time delivery of complex technical products. 
• Wide experience in automotive hardware development processes, including integration, validation and chance management processes. 
• Experience building, developing, and managing highly effective program management tools and processes. 
• Quickly grasp complex problems and effectively guide the engineering team to decisions while coordinating action plans.
• Solid root-cause analysis sense with the ability to correlate product architecture modifications to technical changes. 

• Bachelors in an Engineering discipline, or equivalent work experience. Master's degree preferred. 
• Proven experience of delivering a program or product through various stages of development cycles
• 5+ years of experience in technical leadership, system engineering and/or technical program management, preferably automotive related 
• 7+ years of professional experience in the automotive industry preferred
• Experience working with tools such as Jira, Jama, Gantt charts, Smartsheet and 3dx.

The mission of Speechify is to make sure that reading is never a barrier to learning.

Over 50 million people use Speechify’s text-to-speech products to turn whatever they’re reading – PDFs, books, Google Docs, news articles, websites – into audio, so they can read faster, read more, and remember more. Speechify’s text-to-speech reading products include its iOS app, Android App, Mac App, Chrome Extension, and Web App. Google recently named Speechify the Chrome Extension of the Year and Apple named Speechify its App of the Day.

Today, nearly 200 people around the globe work on Speechify in a 100% distributed setting – Speechify has no office. These include frontend and backend engineers, AI research scientists, and others from Amazon, Microsoft, and Google, leading PhD programs like Stanford, high growth startups like Stripe, Vercel, Bolt, and many founders of their own companies.

Overview

With the growth of our iOS app, being the #18 productivity app in the App Store category and also our recent recognition as Apple's 2025 Design Award for Inclusivity, we find the need for a Senior iOS Engineer to help us support the new user base as well as work on new and exciting projects to push our missing forward.   

This is a key role and ideal for someone who thinks strategically, enjoys fast-paced environments, passionate about making product decisions, and has experience building great user experiences that delight users.

We are a flat organization that allows anyone to become a leader by showing excellent technical skills and delivering results consistently and fast. Work ethic, solid communication skills, and obsession with winning are paramount. 

Our interview process involves several technical interviews and we aim to complete them within 1 week. 

What You’ll Do

• Opportunity to lead key engineering and product decisions
• Actively shipping production code for the Speechify iOS app
• Work within a dedicated product team
• Participate in product discussions to shape the product roadmap
• Maintain and enhance the existing complex app architecture

An Ideal Candidate Should Have

• Experience. You've worked on products that scaled to a large user base
• Track record. You have worked on various products from inception to decent traction. You have been responsible for engineering the product
• Customer obsession. We expect every team member whose responsibilities directly impact customers to be constantly obsessed about providing the best possible experience
• Product thinking. You make thoughtful decisions about the evolution of your product and support internal teams and designers into taking the right direction
• Speed. You work quickly to generate ideas and know how to decide which things can ship now and what things need time
• Focus. We’re a high-growth startup with a busy, remote team. You know how and when to engage or be heads down
• Technical skills. Swift, SwiftUI

Technical Requirements:

• Swift Programming Language
• SwiftUI experience
• Experience in Multithreading Programming
• Working with CI/CD infrastructure
• Experience with Fastlane
• SOLID principles, the ability to write every single class according to SOLID
• Experience with Git and understanding of different Git strategies

What We offer:

• A fast-growing environment where you can help shape the company and product
• An entrepreneurial crew that supports risk, intuition, and hustle
• The opportunity to make a big impact in a transformative industry
• A competitive salary, a collegiate atmosphere, and a commitment to building a great asynchronous culture
• Work on a product that millions of people use and where daily feedback includes users sharing that they cried when they first found the product because it was so impactful on their lives
• Support people with learning differences like Dyslexia, ADD, Low Vision, Concussions, Autism, and Second Language Learners, and give reading superpowers to professionals all over the world
• Work in one of the fastest growing sectors of tech: Intersection of Artificial Intelligence and Audio 

The United States Based Salary range for this role is: 140,000-200,000 USD/Year + Bonus + Stock depending on experience

Think you’re a good fit for this job? 

Tell us more about yourself and why you're interested in the role when you apply.
And don’t forget to include links to your portfolio and LinkedIn.

Not looking but know someone who would make a great fit? 

Refer them! 

Speechify is committed to a diverse and inclusive workplace.

Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

ABOUT ROCKET MONEY 🔮

Rocket Money’s mission is to meaningfully improve the financial prosperity of millions of people. Rocket Money offers members a unique understanding of their finances and a suite of valuable services that save them time and money – ultimately giving them a leg up on their financial journey.

ABOUT THE TEAM 🤝

Data Platform Engineers at Rocket Money further our mission by building and maintaining the infrastructure that enables our company to understand our users and products through reliable, scalable data systems. We build the foundational platform that ingests, processes, and serves data—enabling our Data Analytics, Machine Learning, and Software Engineering teams to build data products efficiently. We work closely with engineering teams to ensure data is captured correctly at the source, design resilient pipelines, and create self-service capabilities that empower stakeholders.

The Data Platform team is in an exciting phase of growth and formalization. While we have established tools and processes in place (dbt, BigQuery, Terraform), we're actively building the comprehensive standards, practices, and systems that will scale with Rocket Money as it grows. We're looking for engineers who can take ownership and evolve workflows into reliable, well-documented, production-grade systems. This is an opportunity to shape architectural decisions, establish team practices, and define how Rocket Money works with data for years to come.

We have a strong preference for process-oriented systems thinkers who excel in balancing stakeholder requirements, technical debt, and organizational complexity—and who thrive in environments where they need to create structure from ambiguity. You'll need to be comfortable making principled decisions, taking ownership not just of code but of outcomes, and operating with significant autonomy as we build the platform together.

ABOUT THE ROLE 🤹

In this role, you will:

• Be an end-to-end owner of our data platform infrastructure, ensuring its security, usability, and performance. Work closely with analytics engineers, machine learning engineers, and software engineers to ensure the platform meets their needs.
• Make collaborative decisions about data tooling, pipeline design, and governance, and implement opinionated interfaces that facilitate easy and best-practice-aligned development for other teammates.
• Continuously improve failure rates for data sources by moving alerting “to the left”; i.e. catching and quarantining bugs/failures as close to the source as possible.
• Analyze patterns in how source data is generated, modeled, and consumed. Work with stakeholders to implement the best solution when new data sources are added.
• Take ownership of existing tools and workflows that may be functional but lack formal structure, documentation, or reliability measures. You'll assess what's working, identify gaps, and systematically improve systems to production-grade quality.
• Document everything you build knowing that you're creating the foundation others will build upon. Your runbooks, architecture decision records, and system documentation will become the institutional knowledge of our data platform.
• Proactively communicate with multiple stakeholders on platform capabilities, technical constraints, architectural decisions, project priorities, and platform support.
• Confidently juggle multiple projects and priorities in our fast-paced environment and work with stakeholders and platform teammates to ensure infrastructure changes, migrations, and improvements are delivered on schedule.
• Automate aggressively and deliberately; anything from GitHub Actions to Slack Workflows to minimize repetitive tasks. Effectively judge when the level of effort is appropriate and avoid over-engineering.

ABOUT YOU 🦄

• You have 6+ years of experience working with data infrastructure, data engineering, or platform engineering within a fast-paced environment. You are highly proficient with SQL, Python, and cloud-based Infrastructure-as-Code (e.g. Terraform), and comfortable working with bash/shell scripting.
• You have 4+ years of production experience with modern data stacks including data warehouses (BigQuery, Snowflake, or Redshift), orchestration tools, managed ingestion services, and infrastructure as code (Terraform, Pulumi, or CloudFormation).
• You have 2+ years of experience building and maintaining production data pipelines, whether through ELT tools, custom applications, streaming systems, or event-driven architectures.
• You've successfully "professionalized" data infrastructure before—taking scrappy, working systems and evolving them into reliable, well-documented, production-grade platforms. You can articulate what "production-ready" means in a data context.
• You have a bias toward action and aren't paralyzed by imperfect solutions. You understand when "good enough for now with a plan to improve" beats "perfect but six months late." You ship incrementally and iterate based on feedback.
• You're comfortable being the first person to tackle a problem. You don't need extensive mentorship or detailed tickets—you can take a high-level business need and figure out the technical approach. That said, you know when to ask for help and can articulate what you need.
• You take ownership seriously—not just of writing code, but of outcomes. When you build something, you implement monitoring, write runbooks, create alerts, and ensure it can be maintained by others. You think about the full lifecycle of systems, not just initial delivery.
• You have strong opinions, weakly held. You can make and defend architectural decisions, but you're open to feedback and willing to change course when presented with better information. You can disagree and commit.
• You understand that "building from scratch" doesn't mean rejecting existing tools—it means thoughtfully selecting, configuring, and integrating managed services and open-source solutions to create a cohesive platform. You know when to build and when to buy.
• You have experience making big changes to critical data infrastructure. You’ve successfully re-architected, migrated, or upgraded data tooling that has strict SLA’s, without significantly affecting downstream stakeholders.

Bonus points if:

• You have led a data infrastructure migration or modernization project where you defined the vision, approach, and implementation.
• You have created internal tools, frameworks, or CLIs that improved how teams work with data (not just one-off scripts).
• You have established data platform best practices like CI/CD workflows, testing frameworks, or observability standards where none existed.
• Expertise in cloud platforms and technologies analogous to our stack:
  • Our stack: GCP (BigQuery, Datastream, Cloud Functions, Vertex AI, GCS), dbt, Fivetran, Postgres, Python, Terraform, Looker, Retool
  • Analogous experience: AWS (Redshift, DMS, Lambda, SageMaker, S3) or Azure (Synapse, Data Factory, Functions), Snowflake, Airbyte/Stitch, infrastructure as code tools, BI platforms

WE OFFER 💫

• Health, Dental & Vision Plans
• Life Insurance
• Long/Short Term Disability
• Competitive Pay
• 401k Matching
• Team Member Stock Purchasing Program (TMSPP)
• Learning & Development Opportunities
• Tuition Reimbursement
• Unlimited PTO
• Daily Lunch, Snacks & Coffee (in-office only)
• Commuter benefits (in-office only)

Additional information: Salary range of $160,000 - $200,000 + bonus + benefits. Base pay offered may vary depending on job-related knowledge, skills, and experience.

Rocket Money, Inc. is an Affirmative Action and Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records.

If you're a PE-licensed engineer who wants real ownership over high-profile projects — not just a seat at the table, but the head of it — this role was built for you.

At Atwell, we don't hand you a project and wish you luck. We give you the autonomy, the team, and the resources to drive outcomes that shape how communities are built and experienced for decades.

————————————————
What You'll Own
————————————————

- Full-cycle delivery of residential and commercial land development projects — from proposal to closeout
- Budgets, scopes, contracts, and schedules with real accountability
- Complex engineering and permitting challenges with the autonomy to influence direction
- Client relationships and external representation for Atwell
- A project team you'll mentor, develop, and lead

————————————————
What You Bring
————————————————

- PE license (required)
- Bachelor's in Civil Engineering or related field
- 6+ years in residential and/or commercial land development
- Deep knowledge of local codes, permitting, and construction practices
- Experience leading multidisciplinary teams and managing client expectations
- Familiarity with tools like Vision, Newforma, or Buzzsaw

————————————————
Why Atwell?
————————————————

- Work that leaves a mark — projects that shape communities for generations
- A clear path to senior leadership as your responsibilities grow
- High-performing, collaborative culture with colleagues who push you to be better
- Freedom to make technical decisions that matter

Disclaimer 

While AI tools may support your application process, this role is built on human talent. Your judgment, experience, and character matter most, so we encourage you to showcase what makes you uniquely you.

Atwell does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any Atwell employee. Resumes from approved vendors must be specifically requested by Atwell and approved by the Atwell Talent Acquisition Team.

#LI-BL1

Atwell is seeking an experienced and driven Project Manager with a strong background in residential and commercial land development to lead high impact projects across diverse markets. If you're passionate about shaping communities through thoughtful design and want to take ownership of challenging, high-profile projects, this is your opportunity to thrive.

What You’ll Do:

• Lead full cycle project delivery from proposal to closeout in residential and commercial land development

• Collaborate with clients, internal teams, and leadership to ensure success, profitability, and technical excellence

• Oversee project budgets, proposals, contracts, scopes, and schedules

• Mentor and direct project teams; promote internal communication and knowledge sharing

• Maintain strong client relationships and represent Atwell in all external communications

• Tackle complex engineering and permitting challenges with the autonomy to influence project direction and outcomes

What You Bring:

• Professional Engineer (PE) license required

• Bachelor’s degree in Civil Engineering or a related discipline

• 4 plus years of experience in residential and/or commercial land development

• Deep understanding of local development codes, permitting processes, and construction practices

• Experience managing multidisciplinary teams and client expectations

• Proficiency with project management tools like Vision and familiarity with document management platforms (e.g. Newforma, Buzzsaw, etc.)

Why Atwell?

• Be part of a firm that values collaboration, creativity, and client focus

• Lead meaningful work that shapes the future of land development and improves the way communities grow

• Work alongside industry leading professionals in a supportive and high performing culture

• Enjoy a clear path for career advancement, with opportunities to evolve into senior leadership as you take on increasing responsibility

• Gain the freedom to drive your own projects and make technical decisions that matter

Disclaimer 

While AI tools may support your application process, this role is built on human talent. Your judgment, experience, and character matter most, so we encourage you to showcase what makes you uniquely you.

Atwell does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any Atwell employee. Resumes from approved vendors must be specifically requested by Atwell and approved by the Atwell Talent Acquisition Team.

#LI-JK1

Job Description

The Enterprise Data Engineer supports the organization’s core enterprise systems and data platforms, with responsibilities spanning ERP technical support, data pipeline development, and system integrations. This role helps ensure reliable system operations while enabling scalable analytics and reporting solutions across the organization.  This role also serves as a key technical partner to the software development team, assisting with the management of on-premises infrastructure and the modernization of deployment workflows.

Key Responsibilities

• Provide technical support and troubleshooting for the organization’s ERP platform and related integrations.
• Assist with ERP system maintenance, upgrades, testing, and performance monitoring.
• Design, develop, and maintain data pipelines and ETL processes supporting the Microsoft Fabric data platform.
• Integrate data from ERP and other business systems to support analytics and reporting initiatives.
• Collaborate with BI developers and analysts to support Power BI datasets and reporting solutions.
• Develop and maintain integrations between enterprise systems, including ERP, Quickbase, and other applications.
• Document system configurations, data pipelines, and integration processes while supporting ongoing platform improvements.
• Infrastructure Bridge: Provide secondary support for the development team’s on-premises Windows/IIS environment, ensuring server stability for hosted applications and databases.
• Deployment Support: Partner with software developers to transition manual "local" deployments into automated CI/CD pipelines within Azure DevOps.
• Environment Stewardship: Monitor on-premises SQL Server health (backups, performance, and storage) to support both the ERP and the broader data platform.

Qualifications

• ERP: Experience supporting ERP or enterprise business systems.
• SQL: Strong SQL and data troubleshooting skills.
• ETL: Experience with ETL processes and modern data platforms (Microsoft Fabric, Azure Data Factory, Synapse, or similar).
• BI: Familiarity with Power BI data models and analytics environments.
• DevOps Mindset: Basic experience with (or a strong desire to learn) Azure DevOps pipeline configuration and automation.
• Windows Server Familiarity: Practical knowledge of IIS (site configuration/SSL)
• Automation Scripting: Ability to use PowerShell or similar tools to automate routine server maintenance or data movement tasks.

Disclaimer 

While AI tools may support your application process, this role is built on human talent. Your judgment, experience, and character matter most, so we encourage you to showcase what makes you uniquely you.

Atwell does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any Atwell employee. Resumes from approved vendors must be specifically requested by Atwell and approved by the Atwell Talent Acquisition Team.

#LI-WS

Sr. Principal Engineer, Systems (Plasma & Multi-Scale Simulation Scientist)

Simulation and Modeling Hub 

Role Summary 

We are seeking a Senior Plasma & Multi-Scale Simulation Scientist to strengthen and expand plasma modeling capabilities within the Simulation and Modeling Hub (S&M-Hub). This role focuses on bridging plasma physics, surface chemistry, and feature-scale behavior to enable predictive, physics-based simulation workflows supporting advanced semiconductor process development (PEALD, PECVD, ALE, RIE). 

Key Responsibilities 

• Develop and apply plasma simulation models (fluid and hybrid CCP/ICP) 

• Bridge multiple scales including plasma–surface interactions, molecular/first-principles insights, and feature-scale behavior 

• Integrate plasma modeling with CFD, thermal, and multi-physics simulations 

• Collaborate with experimental teams to validate models using in-situ and ex-situ diagnostics 

• Translate modeling insights into actionable process and equipment guidance 

• Contribute to S&M-Hub roadmap development, best practices, and advanced modeling workflows 

Required Qualifications 

• Ph.D. in Applied Physics, Plasma Physics, Materials Science, Chemical Engineering, or related field 

• Strong background in plasma-assisted semiconductor processes (PEALD, PECVD, ALE, RIE) 

• Demonstrated experience in computational plasma modeling 

• Ability to connect fundamental modeling with experimental validation and manufacturing relevance 

Preferred Qualifications 

• Experience with first-principles, molecular dynamics, or surface reaction modeling 

• Exposure to feature-scale or device-relevant plasma simulations 

• Familiarity with multi-physics coupling and reduced-order (ROM) or hybrid modeling approaches 

• Experience in industrial R&D or advanced technology development environments 

Our Atomic Layer Deposition (ALD) Chamber Engineering team is seeking innovative and driven and experienced Mechanical Engineers to join their teams. Our ALD and team is at the forefront of developing cutting-edge technologies. As a Mechanical Engineer at ASM, you will contribute to designing, developing, and optimizing high-precision equipment. Collaborating with cross-disciplinary teams, you will play a critical role in solving complex engineering challenges, ensuring product reliability, and driving technological advancements. 

Responsibilities:

• Apply sound engineering principles, product specifications and research data to create designs for systems and products for semiconductor industry.
• Perform engineering calculations including structural, thermal and fluid dynamics problems
• Create and revise Creo Parametric CAD models and detail drawings, ranging in complexity from simple piece parts to large assemblies
• Determine feasibility of product proposals, resolve problems based on technical inputs and develop new designs maintaining product design safety criteria. Apply statistics to optimize and deliver “first time right” designs.
• Prepare product/system designs and related engineering documentation for the manufacturing and testing of prototype and production released products. The documentation shall be complete and easy to follow.
• Project management duties include report generation, schedule creation and maintenance, design reviews and interdepartmental coordination.
• Provide assistance in establishing product configuration and structures on new products and features in both development and manufacturing environments.
• Present and participate in design reviews for unique customer driven specials, product enhancements and other new designs.
• Create, manage and execute engineering project plans, including task scheduling with Gantt charts and resource and cost estimates,
• Travel to customer sites/supplier sites to participate in technical discussions.
• Assist marketing and vendors in preparation of cost estimates dealing with nonstandard options, new system features and product enhancements. 
• Support projects in conjunction with technical staff, managers and manufacturing groups. Support development, installation and testing of hardware to verify performance. Create test plans, verify and approve test procedures. 
• Interface with other organizations on new product updates and ensure a smooth transition of the product into the manufacturing cycle.
• Evaluate change requests and complete all aspects of engineering change orders.

Qualifications:

• Masters in Mechanical Engineering or related degree, PhD strongly preferred. 
• Experience in engineering, design, and development of complex mechanical systems including: reactors, vacuum chambers, gas delivery systems, pneumatics, water cooling circuits, and vacuum systems required.

Skills:

• Semiconductor capital equipment or heavy capital equipment preferred.
• Deposition product knowledge a plus (CVD, ALD, EPI, PVD)
• Knowledgeable in the requirements for CE, NFPA, Semi S2-95 and other relevant standards as applicable to semiconductor manufacturing equipment.
• Understanding of materials: metals, plastics, surface coatings and surface finishes.
• Computer background in Microsoft applications, CREO and AutoCAD.
• Proficiency in ASME Y14.5 and/or ISO 1101:2017 preferred geometric dimension and tolerance
• Has knowledge of best practices and how own area integrates with others; recommends product and process improvements.
• Able to work with a diverse team to achieve requirements and specifications on complex projects.
• Capability to provide and maintain resource coordination and reporting, interfacing with other organizations and outside vendors on resource requirements.
• A critical thinker with proven ability to create effective solutions to complex engineering problems.
• Excellent verbal and written communication; ability to present design concepts to peers and management in a professional and effective manner.
• Ability to work in a team environment with aggressive deadlines and multiple priorities while maintaining a team player attitude.
• Perform self-inspection of all work and is responsible for ensuring that all work performed adheres to documentation requirements, company policies and procedures.

Your Impact

As a key member of our Validation team, you’ll help ensure every product and system meets the highest standards before it reaches our customers. You’ll develop Validation Test Procedures (VTPs), create comprehensive test plans, and collaborate with R&D and other teams to execute testing from start to finish. Your technical expertise will guide product evaluations, uncover issues, and drive resolutions alongside cross-functional partners. In this role, you’ll work closely with Engineering, Manufacturing, Quality Assurance, Project Management, and Supply Chain—making your communication skills just as important as your technical know-how.

What You’ll Do
Location: Onsite at our Deer Valley, Arizona location
Reports to: Manager, Hardware Validation & Reliability Engineering
Direct Reports: none

• Develop comprehensive test plans for our products
• Incorporate Statistical Analysis into Validation Testing
• Review & provide input into System & Product Requirements.
• Test Axon product capabilities & features to confirm requirements are met and ensure a smooth customer experience.
• Understanding troubleshooting firmware/software or hardware issue at a system level.
• Participate in occasional field testing of Axon products
• Work with a team of skilled technicians to ensure timely execution of the test plans
• Provide status updates and recommendations based on data results, and lead final reporting of validation efforts
• Leverage Engineering background to improve tests and processes
• Design and hone Validation Test Procedures with an emphasis on repeatability, standardization, and accuracy of testing
• Lead and oversee execution of all validation tests – including Firmware/Software, Mechanical, Environmental, and Electrical
• Document, track, and report test status and results to Engineering teams, following Good Documentation Practices (GDP).
• Support Failure Analysis (FA) and Root Cause Analysis (RCA) on issues found in test
• Work with external labs to coordinate required testing
• Implement and maintain 5S Standard for lab organization and management
• Develop customer usage models of all products

What You Bring

• MS or BS Degree in Engineering, Mechanical, Electrical, Electromechanical, Reliability or equivalent.
• Minimum of (5 years) of experience with validation or qualification testing
• Mechanical and Environmental test experience
• Test standards experience (MIL-STD, ISO, IEC, etc.)
• Test automation and basic code scripting, experience.
• Willingness to drive department improvement efforts
• Good attention to detail and documentation
• Experience in a regulated environment, a plus
• Experience with identifying, reproducing, documenting, and reporting bugs or issues
• Experience presenting test plan and requirements to stakeholders
• Understanding of Product Development Life Cycle
• Familiar with Project Management skill set, certified PMP a plus
• Familiar with Bug and Test Tracking Suites such as JIRA a plus
• Experience with manufacturing and assembly process
• Excellent analytical and problem-solving skills
• Excellent skills in MS Office products
• Ability to influence multi-functional organizations
• Certification in Six Sigma Black Belt or Green Belt ,a plus

Benefits that Benefit You

•Competitive salary and 401k with employer match
•Discretionary paid time off
•Paid parental leave for all
•Medical, Dental, Vision plans
•Fitness Programs
•Emotional & Mental Wellness support
•Learning & Development programs
•And yes, we have snacks in our offices

Benefits listed herein may vary depending on the nature of your employment and the location
where you work

The mission of Speechify is to make sure that reading is never a barrier to learning.

Over 50 million people use Speechify’s text-to-speech products to turn whatever they’re reading – PDFs, books, Google Docs, news articles, websites – into audio, so they can read faster, read more, and remember more. Speechify’s text-to-speech reading products include its iOS app, Android App, Mac App, Chrome Extension, and Web App. Google recently named Speechify the Chrome Extension of the Year and Apple named Speechify its Design award winner for inclusivity for 2025.

Today, nearly 200 people around the globe work on Speechify in a 100% distributed setting – Speechify has no office. These include frontend and backend engineers, AI research scientists, and others from Amazon, Microsoft, and Google, leading PhD programs like Stanford, high growth startups like Stripe, Vercel, Bolt, and many founders of their own companies.

Overview

With the growth of our Android app, being the most used text-to-speech app in the Play Store, we find the need for a Senior Android Engineer to help us support the new user base as well as work on new and exciting projects to push us forward.   

This is a key role and ideal for someone who thinks strategically, enjoys fast-paced environments, passionate about making product decisions, and has experience building great user experiences that delight users.

We are a flat organization that allows anyone to become a leader by showing excellent technical skills and delivering results consistently and fast. Work ethic, solid communication skills, and obsession with winning are paramount. 

Our interview process involves several technical interviews and we aim to complete them within 1 week. 

What You’ll Do

• Owning major features and working closely with our design team - take ownership of features inside the app and become responsible of delivering high quality features
• Shape the future of our Android team
• Own, maintain and improve reliability metrics for key features
• Participate in discussions across different teams - Product, Design, Engineering
• Review pull requests, and support other teammates
• Handle critical issues or cope with unexpected challenges 
• Take ownership of feature releases and provide nightly builds for the QA team

An Ideal Candidate Should Have

• 5+ years of software engineering experience
• Familiarity with Android components
• Experience building or contributing to at least one Android app
• Product design intuition and user empathy
• Drive to push the boundaries of Android UI/UX
• Understanding of the importance of tests and how to approach writing tests
• Self-drive to improve the app and codebase above and beyond what's outlined in the spec
• Rock solid experience with Kotlin, Kotlin Coroutines, Kotlin Flow, Dagger 2, MVVM, Clean Architecture, Background Services, Music Player Service, Android Animations, Jetpack Navigation, JUnit tests
• Excellent communication skills
• User oriented problem solving approach
• Driven with continuous feedback from leaders

Bonus:

• Experience building, maintaining, or otherwise contributing to open source projects in Android
• Experience with iOS, Web or NodeJS

Technologies we use:

• Kotlin
• Kotlin Coroutines
• Kotlin Flow
• Jetpack Navigation
• Dagger 2
• Room
• Custom Views, Canvas & Paint
• Jetpack Compose
• JUnit

What We offer:

• A fast-growing environment where you can help shape the company and product.
• An entrepreneurial-minded team that supports risk, intuition, and hustle.
• A hands-off management approach so you can focus and do your best work.
• An opportunity to make a big impact in a transformative industry.
• Competitive salaries, a friendly and laid-back atmosphere, and a commitment to building a great asynchronous culture.
• Opportunity to work on a life-changing product that millions of people use.
• Build products that directly impact and support people with learning differences like dyslexia, ADD, low vision, concussions, autism, and more.
• Work in one of the fastest growing sectors of tech, the intersection of artificial intelligence and audio.

The United States Based Salary range for this role is: 140,000-200,000 USD/Year + Bonus + Stock depending on experience

Think you’re a good fit for this job? 

Tell us more about yourself and why you're interested in the role when you apply.
And don’t forget to include links to your portfolio and LinkedIn.

Not looking but know someone who would make a great fit? 

Refer them! 

Speechify is committed to a diverse and inclusive workplace. 

Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

About the Role:

Under the general direction of the Professional Services Operations Lead, the Engineer will provide clients with remote and on-site support services across North America (and international locations, as applicable) in a wide range of client environments.  Physical Infrastructure design/Installation, wireless design, and hardware configuration are standard tasks the Engineer will perform.  Environments can include, but are not limited to, traditional data center facilities, warehouses, office buildings, MDF/IDF closets, headends, and remote outdoor facilities.

*** This is a 100% Onsite requirement with heavy travel***

What You’ll Do:

• Accurately document network infrastructure and design.
• Perform systems engineering, design, analysis, and experimentation of wireless networks.
• Plan, design, engineer, configure, maintain, defend, troubleshoot, and repair classified and unclassified wireless LANs, including wireless access points and their interconnection to the wired infrastructure.
• Provide recommendations for wireless network optimization, additions, and upgrades to meet requirements.
• Perform RF coverage studies, throughput testing,g and wireless site surveys.
• Conduct a root cause analysis of communication issues.
• Lead/assist with proof-of-concept trials with new technologies.
• Develop and maintain standards, reports, and various other types of documentation.
• Determine Wireless Access Point (WAP) placement to optimize coverage across various client environments.
• Conduct client-facing meetings (in person/virtual) in a professional manner.
• Maintain a high level of customer satisfaction.
• Identify building structural components to safely and securely accommodate wall-mounted infrastructure.
• Installation and decommission of all types of enterprise-level equipment and infrastructure in various types of environments.
• Configure various devices (laptops, desktops, servers, switches) with static IP addresses, subnets, gateways, and DNS servers.
• Research /resolve unforeseen problems with little to no consultation.
• Provide guidance and shadowing opportunities for lower-level technicians to ensure adherence to best practices.
• Perform firmware and/or BIOS updates on server, storage, and networking hardware platforms.
• Support lower-level peers in performing crisis management in the event of critical situations or major service outages.
• Provide remote console access to various devices via WebEx, Teams, or Zoom screen sharing.
• Perform basic or pre-defined tasks as directed by the team lead.
• Actively participate during the service transition phase to perform knowledge transfer and documentation.
• Review, report, and maintain accurate records, document all issues/concerns, and submit to the client.
• Assist in performing root cause analysis.
• Determine when/if escalation to leadership is necessary.
• May perform other duties as assigned by supervisor.
• Follow the company's best practices and Standard Operating Procedures.
• Travel is required for physical network installation and configuration.

Qualifications & Interests:

• A minimum of 5 years of experience in enterprise-level network design and support, including: IEEE 802.1, WAN/LAN, optimization, load balancing, routing, switching, QOS, TCP/IP, P2P, and P2MP wireless equipment, with hands-on experience administering Cisco wireless access points and controllers.
• A valid driver's license is required. 
• Prior MSP experience desired.
• Thorough understanding of Ekahau Pro Suite and Sidekick functionality.
• CompTIA A+ certification preferred.
• CompTIA Network+ and Cisco CCNA certifications (or equivalent experience preferred).
• Ability to conduct clear and concise communication in English (written and verbal).
• Fundamental understanding of all Office365 products and their operation.
• Strong attention to detail and quality.
• Thorough understanding of subnetting (Ex, 255.255.255.0 = /24)
• Thorough understanding of console connectivity and OOB management.
• Ability to identify power circuits and circuit breakers.
• Ability to properly identify various device port assignments.
• Ability to identify various power receptacle types (NEMA 5-15, C13/14/15, C19/20, L5-20, L6-30, etc.).
• Ability to properly identify various device port types (RJ45-Console, DB9, SFP, RJ45 Ethernet).
• Ability to properly identify various fiber optic cables and optics (LC, SC, FC, Single Mode, Multimode, SR vs LR Optics).
• Ability to properly terminate and test CAT5 and CAT6 cables (Keystones, punch down panels, and ends).
• Ability to properly run power/data cables, label and dress to Trace3 standards.
• Thorough comprehension of fiber and copper patch panel function and A-Z port identification.

• Ability to travel domestically up to 85% - 90% of the time.

PHYSICAL DEMANDS:

 This role blends active movement with desk-based responsibilities. Candidates should be comfortable with:

• Standing and walking for long stretches across different areas of the facility.
• Lifting items—sometimes heavy, up to 65 to 200 pounds (assisted)—including navigating stairs and placing objects overhead.
• Occasionally, working from ladders when tasks require elevation.
• Performing physical motions such as bending, crouching, and reaching on a regular basis.
• Sitting for extended periods while handling administrative or computer-related tasks.
• Reading printed documents and screens with clarity, including close-up work and adjusting focus as needed.
• Communicating effectively in person and by phone, with clear hearing and speech.

WORK ENVIRONMENT:

• The job takes place in environments where animals are present, which may involve exposure to pet dander, medical tools, and related substances.
• Travel by car and air (up to 75%) is required.
• Employees will often be surrounded by coworkers and clients, with frequent conversations happening nearby.
• Noise levels and indoor temperatures may fluctuate depending on the setting.

POSITION SUMMARY

We are seeking a skilled and motivated Field Engineer to join our team. In this hands-on role, you will serve as the critical link between our software engineering team and real-world deployment environments. You will execute, monitor, and troubleshoot software systems in active warehouse and industrial settings, ensuring seamless sensor deployments and high-quality execution across field operations.

KEY RESPONSIBILITIES

• Execute software front-ends (GUI and command-line interfaces) in field warehouse environments
• Troubleshoot software execution issues in real-time, ensuring minimal disruption to operations
• Collaborate closely with the broader software engineering team on issue diagnosis and continuous improvement
• Manage and monitor the quality of software execution in real-time during deployments
• Deploy and configure arrays of sensors into industrial warehouse settings
• Unpack, assemble, configure, disassemble, and transport technical equipment to and from field sites
• Maintain clear, accurate documentation of deployments, issues, and resolutions

REQUIRED QUALIFICATIONS

• 4+ years of experience in a relevant technical field role
• Willingness and ability to travel to field sites as required
• Proficiency with Linux, Bash, and/or Zsh environments
• Strong hands-on ability to unpack, assemble, disassemble, and transport technical equipment
• Demonstrated documentation skills — able to produce clear, thorough technical records
• Strong problem-solving skills with comfort working in fast-paced, dynamic environments
• Effective communicator — able to relay technical findings to both field and remote engineering teams

PREFERRED QUALIFICATIONS (BONUS POINTS)

The following are not required but will make your application stand out:

Software & Systems

• Familiarity with motion capture ecosystems: Optitrack, Manus, StretchSense, or Rokoko
• Experience with AR/VR headsets or Zed stereo cameras
• Basic Python scripting ability for automation or diagnostics
• Experience with AWS CLI and foundational cloud services
• Experience with real-time monitoring tools
• Experience with remote system administration

Hardware & Connectivity

• Knowledge of hardware communication protocols: I2C, SPI, UART
• Experience deploying sensor arrays or IoT devices in the field
• Familiarity with industrial automation or warehouse management systems

Documentation & Operations

• Experience writing technical documentation, SOPs, or deployment guides
• Experience with machine shop tools and physical fabrication

Salary Range: $110,000-$120,000/K

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience 

As a Senior Engineer II, Mechanical Engineering at ASM, you will play a pivotal role in design and development of high‑precision ALD chamber and semiconductor equipment systems. In this role, you will apply solid mechanical engineering fundamentals to solve complex design challenges, support new product development, and ensure reliable transition from design to manufacturing. Working closely with cross‑functional teams, you will help drive product quality, performance, and innovation. 

What you will be working on 

• Design and develop mechanical systems and components for semiconductor equipment, applying sound engineering principles, product specifications, and research data. 
• Perform engineering calculations related to structural, thermal, and fluid dynamics to support robust and reliable designs. 
• Create and maintain Creo Parametric 3D CAD models and detailed drawings, ranging from individual parts to complex assemblies. 
• Evaluate the feasibility of product proposals, resolve technical issues, and develop new designs in compliance with product safety and design standards. 
• Manage Continuous Improvement Projects (CIPs) and ensure clear communication across teams and with external partners. 
• Prepare complete and clear engineering documentation to support prototype builds, manufacturing, and testing of released products. 
• Support engineering project activities, including report preparation, schedule planning, design reviews, and coordination with cross‑functional teams. 
• Establish product configurations and structures for new products and features in both development and manufacturing environments. 
• Participate in and present at design reviews for new designs, product enhancements, and customer‑specific solutions. 
• Support hardware development, installation, and testing to verify performance; create, review, and approve test plans and test procedures. 
• Interface with manufacturing, suppliers, and other engineering teams to ensure smooth product transfer into the manufacturing cycle. 
• Review and process engineering change requests (ECR/ECO) and support continuous product and process improvements. 
• Travel to customer or supplier sites as needed to support technical discussions and project execution. 
• Maintain a strong commitment to safety in all activities. 

What we are looking for 

• Master’s degree in mechanical engineering or related disciplines. 
• Several years of hands‑on experience in mechanical design and development of complex systems within semiconductor or capital equipment industries. 
• Practical experience with mechanical systems such as vacuum chambers, reactors, susceptor heaters, gas delivery systems, pneumatics, cooling circuits. 
• Ability to perform simulation and engineering analysis (e.g., structural, thermal, fluid dynamics) to support robust and reliable designs. 
• Proficiency in Creo (or equivalent CAD tools) and ability to create detailed engineering drawings 
• Solid understanding of materials, manufacturing processes, and mechanical design fundamentals. 
• Strong problem‑solving skills and the ability to work effectively in a cross‑functional, fast‑paced environment. 

What sets you apart 

• PhD in Mechanical Engineering or related degree.  
• Experience with semiconductor deposition equipment (ALD, CVD). 
• Strong capability to run and interpret Multiphysics simulations (structural, thermal, CFD) and apply the results to improve design specifications. 
• Experience with Susceptor heaters, Vacuum and electrostatic chucks. 
• Proficiency in GD&T standards (ASME Y14.5 and/or ISO 1101). 
• Experience supporting products through the full lifecycle, from concept and design to manufacturing release. 
• Ability to independently manage technical tasks while contributing effectively as a team player. 

The Key Account Technologists are the ASM product experts who support extensive customer and internal company contacts while driving the introduction of new products, product improvements, and product modifications.  As a Key Account Technologist (KAT) you'll help to expand product market share by helping win development tool of record (DTOR) selections and supporting competitive process application performance of the installed base. Further, the role requires someone who is not only skilled in R&D/Innovation, development, engineering, and design for manufacturability, but also someone who can be a key team member developing and delivering the ALD technology roadmap. This role requires interactions and communication between the product development team and the customer to ensure customer issues and concerns are being addressed with solutions and timelines.  A persistent approach to Product Life Cycle (PLC) will also be required to achieve strong engagement with the new product development team. This position requires Korean, Japanese or Mandarin language skills.

RESPONSIBILITIES:

• Responsible for process application NPI (New Product Introduction), product improvements, and product modifications for key product unit (KPU) installed base
• Develop and maintain relationships with key customers.
• Responsible for managing all the technical account aspects of customers
• Responsible for resolution of process and hardware-related escalations in the field
• Responsible for defining, maintaining, and implementing BKM process for all process applications – including standards, specs, and recipes, installed base performance
• Support highly engaged working relationship between KAT department, ASM’s customer account teams and customers’ engineers to ensure all customer needs and requirements are understood and addressed
• Drive close cooperation with multiple internal stakeholders, especially with Process Development teams, Global Sales, Service and Spares, Account Teams, Engineering and Global Product Management (GPM)

Key SELECTION CRITERIA:

• Excellent Korean, Japanese, or Mandarin language skills, both written and spoken
• 5+ years (or 3+ years with Ph.D.) experience in the semiconductor wafer processing or capital equipment industry
• Master’s degree (or above) in material science, physics, chemical, mechanical or electrical engineering, or related field
• Related work experience can include process engineering, technical marketing, or product support
• Proven ability to drive continuous improvement across operations
• Able to build long term relationships of trust with customers
• Strong written and verbal communication skills including excellent presentation and influencing skills
• Semiconductor experience should be primarily focused on atomic layer deposition (ALD) or chemical vapor deposition (CVD).
• Experience in work function, metallization, silicides, and electrodes in logic or memory is preferred

PERSONAL / professional ATTRIBUTES:

• Self-starter with high energy and strong work ethic
• Highly motivated and results driven
• A proactive change agent
• A strategic thinker with the ability to implement and drive tactics, strong at execution
• A problem solver – communication comes naturally when solving problems and addressing roadblocks.
• Able to independently make and execute decisions in a timely manner, leading people accordingly
• Ability to lead and influence others across cultures
• Highly collaborative and able to manage conflict

Travel:

• Flexibility to travel up to 30% of the time (internationally)

As a Senior Process Engineer at ASM, you will work with semiconductor processing and analytical equipment to research, develop and optimize processes focused on oxidation, annealing, curing, Atomic Layer Deposition (ALD) for logic, memory, analog, power, and MEMS applications. You will design and conduct complex experiments, measurements and perform the interpretation of complex experimental output. While you deliver creative and inventive solutions, technical publications, and generation of Intellectual Property (IP) are an essential function of this position. This position requires Korean, Japanese or Mandarin speaking skills.

Key Responsibilities 

• Creative problem solver with experience in developing new films for emerging applications and experience in chemistry/materials characterization.
• Works with semiconductor processing equipment to research, develop and optimize unit processes focused on the deposition of metal and dielectric films via ALD.
• Bringing innovative ideas, staying abreast of state-of-the-art processing applications in the semiconductor industry to be effective.
• Process consulting and accountability including technical papers on advanced process applications and Intellectual Property creation.
• Participates in and drives technical problem-solving sessions using the related scientific method and industry tools, such as Ishikawa diagrams.
• Designs and conducts experiments, in addition to measuring and interpreting experimental output, aimed at fulfilling stated objectives using Design of Experiments (DOE) and Response Surface Methodology (RSM).
• Troubleshoots equipment problems and is personally and actively engaged in problem via “hands-on” modalities.
• Works with customers and central marketing to understand and define requirements to successfully execute and document customer demonstrations.
• Develops methods and techniques for integrating metal and/or oxide films into existing and future device technologies.
• Ensures successful product transfer to customer base by performing demonstrations, training field service personnel, traveling to support remote sites (up to 10% travel required), and drafting documentation regarding process development, tool operation and maintenance.
• Produces technical papers on process, equipment, and device integration improvement strategies and presents to professional audience.
• You may be assigned supervisory duties over supporting process engineering technicians and aides. These supervisory duties could include direct input into employees’ performance evaluations, discipline, and discharge.

Qualifications

• Master’s or PhD degree in Chemical Engineering, Materials Science, Chemistry, or Physics.
• Experience with Atomic Layer Deposition (ALD)
• Knowledge of electrical characterization techniques for CMOS devices.
• Application of dielectric and/or metal films for logic and memory structures.
• Training in CFD (computational fluid dynamics), either theoretical or practical is preferred.
• Knowledge of electrical characterization techniques for CMOS devices is preferred.

  Skills

• Ability to independently manage complex process development projects, including personnel, project schedules, experimental thrusts, hardware procurement and budgetary oversight.
• Ability to be a process consultant to internal and external customers.
• An authority on interplay between hardware design (e.g., chemical reactor design) and operation and process outputs
• Understanding of requirements for integration of metals as work function materials and barrier layers in FEOL and BEOL process flows
• Demonstrated ability to develop and completely characterize deposition processes using first principles and experimental design techniques (e.g., DOE, RSM).
• Experience with the theory, practice, and interpretation of materials characterization techniques such as XPS, SIMS, RBS, AFM, XRD, HRTEM, FESEM, Auger, Raman and ellipsometry.
• Excellent verbal and written communication skills, with ability to clearly communicate advanced technical constructs in direct and concise manner.

The Role...

Armis Security is seeking a highly motivated Sales Specialist to join our dynamic team. This role focuses on one of our core products and is crucial for driving technical sales and pre-sales activities. The ideal candidate will have a strong background in technical sales or as a Sales Engineer, with a deep understanding and passion for vulnerability solutions and remediation. You’ll wear many hats in this role, quickly growing into a commercially-focussed SME for the offering. 

What you will do:

• Act as a technical overlay specialist for Application Security in the sales process. Collaborate closely with the sales team to understand customer requirements and propose solutions that effectively demonstrate the value.
• Lead and support pre-sales activities including technical presentations, demonstrations, and solution scoping. Work closely with prospects to understand their technical challenges and requirements.
• Become a subject matter expert on Application Security and related vulnerability and remediation technologies. Articulate the technical benefits and competitive advantages of Application Security to both technical and non-technical audiences.
• Engage with prospects and customers to build strong relationships and understand their pain points. Provide expert guidance on how Application Security can address their specific vulnerability management needs.
• Work closely with product management and engineering teams to provide feedback from the field and influence the product roadmap. Act as a liaison between customers and internal teams to ensure customer success.
• Stay current with industry trends, competitive landscape, and emerging technologies in vulnerability management and remediation.

What we expect...

• 7+ years in a Sales Engineer, Solutions Architect, SME overlay, or similar technical sales role within the cybersecurity industry.
• A clear track record of success against targets and quota at similar or adjacent scaling Cyber security companies. 
• Strong understanding of vulnerability management solutions is essential. Experience with Application Security or similar competing products (inferior of course), is highly preferred.
• Excellent presentation and communication skills, both verbal and written. Ability to effectively convey technical concepts to diverse audiences.
• Proven ability to understand customer needs and build relationships based on trust and credibility.
• Genuine enthusiasm for cybersecurity, vulnerability management, and the impact of proactive remediation strategies.

A self-motivated, independent thinker who understands the Enterprise customer segment. The salary range guidance for this position is: $130,000-$160,000 The salary range listed does not include other forms of compensation or benefits (i.e. bonuses, commissions, stocks, health insurance benefits, etc.) offered to candidates. Visit our careers site for more information on benefits at Armis.

The choices you make in your career journey matter. You want to do interesting work in an important field while also having time to live your life, which is why we place so much value in your life-work balance. Armis sets you up for success with comprehensive health benefits, discretionary time off, paid holidays including monthly me days, and a highly inclusive and diverse workplace. Put your unique experiences and perspective to work in an environment where they will enable you to thrive, grow, and live your life with integrity. Armis is proud to be an equal opportunity employer. We never discriminate based on race, ethnicity, color, ancestry, national origin, religion, sex, sexual orientation, gender identity, age, disability, veteran status, genetic information, marital status or any other legally protected (or not) status. In compliance with federal law, all persons hired will be required to submit satisfactory proof of identity and legal authorization. Please click here to review our privacy practices.

The Key Account Technologists are the ASM product experts who support extensive customer and internal company contacts while driving the introduction of new products, product improvements, and product modifications.  As a Key Account Technologist (KAT) you'll help to expand product market share by helping win development tool of record (DTOR) selections and supporting competitive process application performance of the installed base. Further, the role requires someone who is not only skilled in R&D/Innovation, development, engineering, and design for manufacturability, but also someone who can be a key team member developing and delivering the PECVD technology roadmap. This role requires interactions and communication between the product development team and the customer to ensure customer issues and concerns are being addressed with solutions and timelines.  A persistent approach to Product Life Cycle (PLC) will also be required to achieve strong engagement with the new product development team.

Responsibilities:

• Responsible for process application NPI (New Product Introduction), product improvements, and product modifications for key product unit (KPU) installed base
• Develop and maintain relationships with key customers.
• Responsible for managing all the technical account aspects of customers
• Responsible for resolution of New process escalations in the field during NPI stage
• Responsible for defining and implementing BKM process for all process applications – including standards, specs, and recipes, installed base performance
• Support highly engaged working relationship between KAT department, ASM’s customer account teams and customers’ engineers to ensure all customer needs and requirements are understood and addressed
• Drive close cooperation with multiple internal stakeholders, especially with Process Development teams, Business Development Team, Account Teams, Engineering and Global Product Management (GPM)

Qualifications:

• 5+ years (or 3+ years with Ph.D.) experience in the semiconductor wafer processing or capital equipment industry
• Master’s degree (or above) in material science, physics, chemical, mechanical or electrical engineering, or related field
• Related work experience can include process engineering, technical marketing, or product support
• Proven ability to drive continuous improvement across operations
• Able to build long term relationships of trust with customers
• Strong written and verbal communication skills including excellent presentation and influencing skills
• Semiconductor experience should be primarily focused on PECVD.
• Experience in work function, metallization, silicides, and electrodes in logic or memory is preferred

Attributes:

• Self-starter with high energy and strong work ethic
• Highly motivated and results driven
• A proactive change agent
• A strategic thinker with the ability to implement and drive tactics, strong at execution
• A problem solver – communication comes naturally when solving problems and addressing roadblocks.
• Able to independently make and execute decisions in a timely manner, leading people accordingly
• Ability to lead and influence others across cultures
• Highly collaborative and able to manage conflict

Travel:

• Flexibility to travel up to 30% of the time (internationally)

As a Senior Principal Engineer, Global Product Management, you’ll drive ASM’s product strategy and market leadership by shaping the product roadmap, overseeing the full product lifecycle, and engaging with customers to deliver solutions that push the boundaries of innovation. This role offers the unique opportunity to work across disciplines, collaborate with internal and external stakeholders, and influence the future of semiconductor technology.

What you will be working on

• Product Strategy & Roadmap – Identify key market opportunities and develop product roadmaps to enhance ASM’s market position.
• Product Lifecycle Management – Drive products from concept to high-volume manufacturing and eventual obsolescence.
• Market Requirements Specification (MRS) & Business Planning – Define market requirements, conduct competitive analysis, and develop business plans.
• Customer & Supplier Engagement – Lead technical discussions with customers, create strategic presentations, and coordinate with suppliers to optimize cost, specifications, and timelines.
• Financial & Market Analysis – Work with finance to assess product profitability, manage cost models, and develop pricing strategies.
• New Product Introductions – Support product positioning, go-to-market strategies, and executive alignment for new product launches.
• Technical & Marketing Support – Develop key marketing materials, support sales training, and lead product promotions at conferences.

What we are looking for

• PhD in Materials Science, Electrical Engineering, Chemical Engineering, or a related technical field.
• 5+ years of experience in semiconductor process engineering or semiconductor equipment technology.
• 3+ years of experience in customer support, product management, or product marketing roles.
• Strong understanding of semiconductor capital equipment, supply chain, and product lifecycle management.
• Ability to work cross-functionally and influence internal and external stakeholders.
• Experience engaging directly with customers, presenting technical marketing materials, and defining product value propositions.

What sets you apart

• Experience in competitive analysis, product segmentation, and pricing strategies.
• Strong proficiency in Excel modeling, project management, and analytical skills.
• Demonstrated ability to lead and develop teams while driving strategic initiatives.

As a Principal Process Engineer at ASM, you will work with semiconductor processing and analytical equipment to research, develop and optimize processes focused on oxidation, annealing, curing, Atomic Layer Deposition (ALD, PEALD), Epitaxy or PECVD for logic, memory, analog, power, and MEMS applications. You will utilize your extensive technical domain expertise to deliver innovative solutions to our product teams. You will design and conduct complex experiments, measurements and perform the interpretation of complex experimental output. While you deliver creative and inventive solutions, technical publications, and generation of Intellectual Property (IP) are an essential function of this position.

Key Responsibilities 

• Creative problem solver with experience in developing new films for emerging applications and experience in chemistry/materials characterization.
• Works with semiconductor processing equipment to research, develop and optimize unit processes focused on the deposition of metal and dielectric films via ALD, PEALD, Epitaxy, and/or PECVD.
• Bringing innovative ideas, staying abreast of state-of-the-art processing applications in the semiconductor industry to be effective.
• Process consulting and accountability including technical papers on advanced process applications and Intellectual Property creation.
• Provides mentorship to other Process Engineers within the team.
• Participates in and drives technical problem-solving sessions using the related scientific method and industry tools, such as Ishikawa diagrams.
• Designs and conducts experiments, in addition to measuring and interpreting experimental output, aimed at fulfilling stated objectives using Design of Experiments (DOE) and Response Surface Methodology (RSM).
• Troubleshoots equipment problems and is personally and actively engaged in problem via “hands-on” modalities.
• Works with customers and central marketing to understand and define requirements to successfully execute and document customer demonstrations.
• Develops methods and techniques for integrating metal and/or oxide films into existing and future device technologies.
• Ensures successful product transfer to customer base by performing demonstrations, training field service personnel, traveling to support remote sites (up to 10% travel required), and drafting documentation regarding process development, tool operation and maintenance.
• Produces technical papers on process, equipment, and device integration improvement strategies and presents to professional audience.
• You may be assigned supervisory duties over supporting process engineering technicians and aides. These supervisory duties could include direct input into employees’ performance evaluations, discipline, and discharge.

Qualifications

• Master’s or PhD degree in Chemical Engineering, Materials Science, Electrical Engineering, or Physics
• 7+ years of combined education, research, and work experience with:
  • Cure, oxidation, ALD, CVD, Epitaxy, PECVD and/or other thin film deposition.
  • Materials characterization techniques such as XPS, SIMS, RBS, AFM, XRR, XRD, TEM, SEM and ellipsometry.
• Knowledge of electrical characterization techniques for CMOS devices.
• Application of dielectric and/or metal films for logic and memory structures.
• Training in CFD (computational fluid dynamics), either theoretical or practical is preferred.
• Knowledge of electrical characterization techniques for CMOS devices is preferred.

Skills

• Ability to independently manage complex process development projects, including personnel, project schedules, experimental thrusts, hardware procurement and budgetary oversight.
• Ability to be a process consultant to internal and external customers.
• An authority on interplay between hardware design (e.g., chemical reactor design) and operation and process outputs
• Understanding of requirements for integration of metals as work function materials and barrier layers in FEOL and BEOL process flows
• Demonstrated ability to develop and completely characterize deposition processes using first principles and experimental design techniques (e.g., DOE, RSM).
• Experience with the theory, practice, and interpretation of materials characterization techniques such as XPS, SIMS, RBS, AFM, XRD, HRTEM, FESEM, Auger, Raman and ellipsometry.
• Excellent verbal and written communication skills, with ability to clearly communicate advanced technical constructs in direct and concise manner.

As a Senior Process Engineer at ASM, you will work with semiconductor processing and analytical equipment to research, develop and optimize processes focused on oxidation, annealing, curing, Atomic Layer Deposition (ALD, PEALD), Epitaxy or PECVD for logic, memory, analog, power, and MEMS applications. You will design and conduct complex experiments, measurements and perform the interpretation of complex experimental output. While you deliver creative and inventive solutions, technical publications, and generation of Intellectual Property (IP) are an essential function of this position. This job posting is for applicants with 2+ years of industry work experience. 

Key Responsibilities 

• Creative problem solver with experience in developing new films for emerging applications and experience in chemistry/materials characterization.
• Works with semiconductor processing equipment to research, develop and optimize unit processes focused on the deposition of metal and dielectric films via ALD, PEALD, Epitaxy, and/or PECVD.
• Bringing innovative ideas, staying abreast of state-of-the-art processing applications in the semiconductor industry to be effective.
• Process consulting and accountability including technical papers on advanced process applications and Intellectual Property creation.
• Participates in and drives technical problem-solving sessions using the related scientific method and industry tools, such as Ishikawa diagrams.
• Designs and conducts experiments, in addition to measuring and interpreting experimental output, aimed at fulfilling stated objectives using Design of Experiments (DOE) and Response Surface Methodology (RSM).
• Troubleshoots equipment problems and is personally and actively engaged in problem via “hands-on” modalities.
• Works with customers and central marketing to understand and define requirements to successfully execute and document customer demonstrations.
• Develops methods and techniques for integrating metal and/or oxide films into existing and future device technologies.
• Ensures successful product transfer to customer base by performing demonstrations, training field service personnel, traveling to support remote sites (up to 10% travel required), and drafting documentation regarding process development, tool operation and maintenance.
• Produces technical papers on process, equipment, and device integration improvement strategies and presents to professional audience.
• You may be assigned supervisory duties over supporting process engineering technicians and aides. These supervisory duties could include direct input into employees’ performance evaluations, discipline, and discharge.

Qualifications

• Master’s or PhD degree in Chemical Engineering, Materials Science, Electrical Engineering, or Physics.
• 2+ years of work experience with:
  • Cure, oxidation, ALD, CVD, Epitaxy, PECVD and/or other thin film deposition.
  • Materials characterization techniques such as XPS, SIMS, RBS, AFM, XRR, XRD, TEM, SEM and ellipsometry.
• Knowledge of electrical characterization techniques for CMOS devices.
• Application of dielectric and/or metal films for logic and memory structures.
• Training in CFD (computational fluid dynamics), either theoretical or practical is preferred.
• Knowledge of electrical characterization techniques for CMOS devices is preferred.

  Skills

• Ability to independently manage complex process development projects, including personnel, project schedules, experimental thrusts, hardware procurement and budgetary oversight.
• Ability to be a process consultant to internal and external customers.
• An authority on interplay between hardware design (e.g., chemical reactor design) and operation and process outputs
• Understanding of requirements for integration of metals as work function materials and barrier layers in FEOL and BEOL process flows
• Demonstrated ability to develop and completely characterize deposition processes using first principles and experimental design techniques (e.g., DOE, RSM).
• Experience with the theory, practice, and interpretation of materials characterization techniques such as XPS, SIMS, RBS, AFM, XRD, HRTEM, FESEM, Auger, Raman and ellipsometry.
• Excellent verbal and written communication skills, with ability to clearly communicate advanced technical constructs in direct and concise manner.

We are seeking R&D-oriented Engineers to join our team in the development and improvement of semiconductor manufacturing equipment, specifically focusing on plasma-based chambers.

Key Responsibilities:

· Conduct research and development of components and mechanisms, including concept creation, feasibility studies, and practical evaluation/testing.

· Perform hardware characterization, define process window, and analyze process-hardware interaction.

· Design experiments, collect data, analyze results, and compile reports on various process development experiments

· Develop new equipment and functionalities, as well as improve existing equipment, from specification to detailed design.

· Ability to function in multi-disciplined fields (Process development, Hardware development and Metrology)

Required Skills:

· PhD in Physics, Engineering (Chemical, Electrical, Mechanical, or related fields), Material Science or Master degree with at least 3 years professional experience.

· In-depth knowledge of low-pressure RF plasma systems, including ICP, CCP, and microwave plasma sources

· Strong understanding of plasma-surface interactions, and precursor/plasma chemistry. Familiarity with PECVD, PEALD, RIE process mechanisms.

· Excellent communication skills for technical documentation, cross-functional collaboration, and customer-facing discussions

Preferred Skills:

· Familiarity with epitaxial silicon growth and characterization

· Familiarity with EM and multi-physics simulation tools (e.g., COMSOL, High Frequency Simulation software such as Ansys HFSS, CST studio )

· Familiarity with plasma diagnostics (e.g., Langmuir probes, OES, VI probes)

· Familiarity with common thin-film & chemical characterization & metrology techniques including: SEM, TEM, XRD, Ellipsometry, XPS / AES as well as ICP-MS, particle analysis, sheet resistance probe analysis etc

As a Process Productivity Engineer at ASM, you will work with our customers as a system level expert focused on product support for new product development. This role will require 25-50% domestic and international travel (depending on product cycle).

Responsibilities: 

• Drives and owns top customer productivity issues (e.g., defect reduction, tool matching, tool availability, etc.) for products in the field across the product life cycle, from new product introduction through high volume manufacturing.  
• Interaction with Hardware, Electrical, Controls, Product Support, Process, and Software engineering teams to become the system level expert on new products transferred to the field. Become an expert on the interaction of the products with the customer processes and resulting tool productivity.
• Provides guidance to engineering during the design phase of new products on key customer requirements and needs, including productivity specifications (e.g., defects, tool matching, throughput, etc.) and process best practices.
• Designs and conducts experiments, in addition to measuring and interpreting experimental output, aimed at fulfilling stated objectives using Design of Experiments (DOE) and Response Surface Methodology (RSM).
• Troubleshoots equipment problems and is personally and actively engaged in problem via “hands-on” modalities.
• Owns marathon qualification of new processes and products in the development lab, including data collection, analysis, and improvement plans. Works closely with Process, Product Support, and Hardware engineering teams providing real time feedback of marathon issues and recommended solutions.
• Ensure processes follow best known practices throughout the product life cycle, from before the first eval shipment through the HVM ramp. Share and proliferate new solutions across internal teams, including Process, Product Support, and Field Support engineering teams.

Education and Requirements:

• Master’s or PhD Degree in Chemical Engineering, Materials Science, Chemistry, Physics, Mechanical Engineering, Electrical Engineering, or related degree.
• Hands-on and/or course work experience with hardware.
• Strong technical troubleshooting and root cause analysis skills.
• Demonstrated ability to characterize processes and/or hardware using first principles and experimental design techniques (e.g., DOE, RSM).
• High motivation, enthusiasm and curiosity to learn.
• Interested in working with new products, testing them and becoming a system level expert.
• Excellent verbal and written communication skills, with ability to clearly communicate advanced technical constructs in direct and concise manner.
• Statistical analysis and script writing in Python, Matlab, or similar is a plus.
• Ability to travel (domestic and international) 25-50%

Engineer, Field Process - Phoenix, AZ

As a member of the Global Sales and Services business unit, our HVM (High Volume Manufacturing) Field Process Engineering team is the on-site process application expert in improving process run on our tool sets at our customer locations. In this role, the Field Process Engineer drives the process improvement projects, is responsible for tracing tool performance and ensuring the ASM products meet our customer requirements. The Field Process Engineer is a technical bridge between the customer process teams, the customers hardware teams and the customer account team.

The Field Process Engineer is a key customer interface and must demonstrate responsibility and proper communication when interacting with the customer. Delivering customer satisfaction is a key objective in this role.
 

What you'll be working on

On-site process support:

• Serve as the single point of contact for customers, troubleshooting malfunctions, managing concerns and resolving escalations effectively. 
• Translate technical ability and seamless communication with customers throughout the resolution process, providing clean updates and support. 
• Lead equipment qualification during installation start-up to ensure achieve customer process specifications are achieved, customer schedule is achieved, and ASM budget is achieved.
• Trace achievement of customer specifications through installation, start-up, and warranty phases, and drive containment, short-term solutions, and long-term solutions that ensure the customers’ requirements are achieved.
• Develop, maintain, and ensure relevance of technical information used by internal and external stakeholders – especially sharing lessons learned within our key account organization and Global Sales and Services business unit.
• Ensure communication vehicles, telephone, email, and presentation, etc., facilitate efficient and consistent follow-up with internal and external stakeholders.
• Work closely with the Customer to design and conduct experiments to meet the Customer’s needs (new development, CIP, troubleshooting, tool-to-tool matching).
• Evaluate, understand, and identify current customer needs, while also anticipating future needs and building long-term sustainable relationships and solutions.
• Drive continuous improvement for the customer experience through team, process, and support tool development.

What we are looking for:

• Bachelor of Science or Master's in Chemical Engineering, Materials Science, or Physics.
• Must have experience directly supporting semiconductor customers to manage escalations and drive support through ways of working.  
• Broad technical experience and business perspective preferably in the Semiconductor / Capital Equipment industry.
• Knowledge of and experience with semiconductor device applications, vacuum techniques, film characterization and metrology techniques, and deposition processes and equipment. Preference will be given to candidates who have a demonstrated history of working in HVM environments, preferably with ASM equipment.
• Experience with advanced troubleshooting/structured problem analysis methodologies
• Experience designing and conducting experiments, in addition to measuring and interpreting experimental output, aimed at fulfilling stated objectives using DOEs and statistical methods.
• Proactively support escalations, develop and manage action plans, and ensure clear communication between customer, service team, business unit, or other sub-suppliers.
• Minimal travel required, typically under 10%, on an as‑needed basis for training, technical engagement, or customer site support.
• In case of escalations, additional hours and working weekends may be required

What sets you apart:

We are seeking a highly motivated System Engineer to join our Sensor Technology Group, a dynamic team driving innovation in advanced sensor solutions for semiconductor manufacturing equipment. This role offers a unique opportunity to work at the intersection of mechanical, electrical, chemical, and materials engineering, contributing to the development of next-generation sensor systems that enable precision, reliability, and performance in semiconductor fabrication.

Responsibilities:

• Lead and support the design, integration, and validation of sensor systems within semiconductor equipment platforms.
• Collaborate cross-functionally with hardware, software, and process engineering teams to define system requirements and architecture.
• Develop and execute test plans to evaluate sensor performance under various operating conditions.
• Analyze data to identify trends, troubleshoot issues, and optimize sensor functionality.
• Drive continuous improvement in sensor system reliability, manufacturability, and cost-effectiveness.
• Support technology transfer from R&D to production, including documentation and training.
• Stay current with emerging sensor technologies and industry trends.

Requirements:

• Bachelor’s or Master’s degree in mechanical engineering, Electrical Engineering, Chemical Engineering, Materials Science, or a related field.
• 3+ years of experience in system engineering, preferably in semiconductor equipment or high-tech industries.
• Experience with system integration, data acquisition, and signal processing.
• Experience in tools such as JMP, Python, or similar for data analysis.
• Excellent problem-solving skills and ability to work in a fast-paced, collaborative environment.
• Strong communication skills and ability to present technical concepts to diverse audiences.

Preferred Qualifications:

• Relevant work experience in semiconductor equipment or a similar industry.
• knowledge of semi-conductor vacuum system, automatic wafer transfer (mechatronic: robotics, servo control, sensor and actuators) and integration into complex wafer processing system.
• Understanding of sensor technologies (e.g., thermal, optical, chemical, pressure, flow).
• Semiconductor related metrology knowledge (instrumentation to qualify & measure thickness, particles, electrical resistivity, etc.)
• Experience transitioning third party tools and service to in-house is particularly interesting

As a Principal Engineer, Surface Technology (Surface Modification) reporting to Surface Technology Group, you will work with other ASM global technology team members including materials scientists, equipment engineers, process, quality and field service engineers as well as external customers to solve time critical or strategic technology challenges and develop unique advanced solutions in collaborative partnerships.

The position requires the individual to:

• Drive improvements in Thermal & Plasma Enhanced ALD system component longevity, emissivity, stability, refurbishment / service strategy and process performance to enable reliable and efficient deposition of a range of next generation advanced thin film materials exhibiting various electrical & physical properties.
• Work independently to develop new approaches to modify surfaces of internal ALD chamber components to improve performance, lifetime, defectivity and CoO for customers processing various materials for use as functional/active layers in semiconductor device stacks.
• Connect process conditions, physical characterization, and electrical response towards understanding of mechanisms.
• Specify, procure and develop state-of-the-art advanced process equipment.
• Formulate new surface texturing and dry coating strip methods.
• Leverage advanced knowledge of media blast, multi-axis automated control systems, e-beam and pulsed laser process technologies.
• Direct / manage projects & relationships with critical 3^rd party suppliers & supporting institutions.
• Have a passion for surface engineering processes, be inquisitive to drive projects & root-cause failure investigations whilst being systematic & entrepreneurial in mind-set.
• Demonstrate experience within a high-volume semiconductor clean room environment.
• Be based within the ASM Phoenix AZ campus but open to travel (<10%) to customer and supplier global sites when necessary.

Preferred Qualifications:

• Bachelor’s degree or advanced degree studying Materials Science, Physics, Chemical Engineering, Chemistry, Electrical Engineering or similar technical / scientific field.
• Minimum 1-5 years of industrial experience preferably using automated blast or industrial laser or e-beam systems.
• Expertise in high volume semiconductor cleaning  environments highly advantageous.
• Solid understanding of Design-of-Experiments execution and statistical data analysis.
• Familiarity with common surface characterization & metrology techniques including: Optical microscopy, SEM, TEM, XPS / AES, profilometry, CMM as well as ICP-MS, particle analysis etc.
• Ability to engage with customers both on a highly technical basis and personally.
• Self-motivated, results-oriented with high commitment to work quality in a fast-paced environment.
• Proven ability to solve complex analytical problems and provide robust solutions based on solid technical background.

In this role as a Senior Engineer, Surface Technology (Parts Coating) reporting within the Surface Technology Group, you will work with other ASM global technology team members including materials scientists, equipment engineers, process, quality and field service engineers as well as external customers to solve time critical or strategic technology challenges and develop unique advanced solutions in collaborative partnerships.

The position requires the individual to:

• Drive improvements in Thermal & Plasma Enhanced ALD system parts longevity, stability, refurbishment / service strategy and process performance to enable reliable and efficient deposition of a range of next generation advanced thin film materials exhibiting various electrical & physical properties.
• Work independently to develop new approaches to coat, protect and refurbish internal vacuum chamber components to improve performance, lifetime, defectivity and CoO for customers processing various materials for use as functional/active layers in semiconductor device stacks.
• Connect process conditions, physical characterization, and electrical response towards understanding of mechanisms.
• Specify, procure and develop state-of-the-art advanced process equipment.
• Formulate new protective and release coating formulations.
• Leverage advanced knowledge of various atmospheric & vacuum based etch & surface treatment approaches and utilize expertise in a range of surface / bulk characterization methods.
• Direct / manage projects & relationships with critical 3^rd party suppliers & supporting institutions.
• Have a passion for surface engineering processes, be inquisitive to drive projects & root-cause failure investigations whilst being systematic & entrepreneurial in mind-set.
• Demonstrate experience within a high volume semiconductor clean room environment.
• Be based within the ASM Phoenix AZ campus but open to occasional travel to additional global ASM, customer and supplier global sites when necessary.

Preferred Qualifications:

• Bachelors science degree ideally involving theory & practice of an appropriate thin film deposition technique whilst studying Materials Science, Physics, Chemical Engineering, Chemistry, Electrical Engineering or similar technical field.
• Minimum 1-5 years of experience in ALD (atomic layer deposition), PECVD (plasma enhanced chemical vapor deposition) or PVD (physical vapor deposition) technology,
• Expertise in coating equipment design and electro-mechanical development approaches highly advantageous.
• Experience using ASM EmerALD systems a plus.
• Solid understanding of Design-of-Experiments execution and statistical data analysis.
• Familiarity with common thin-film & chemical characterization & metrology techniques including: Optical microscopy, SEM, TEM, XRD, Ellipsometry, XPS / AES as well as ICP-MS, particle analysis, sheet resistance probe analysis etc.

• Ability to engage with customers both on a highly technical basis and personally.
• Ability to self-manage projects from conception to high volume production necessary
• Self-motivated, results-oriented with high commitment to work quality in a fast-paced environment.
• Proven ability to solve complex analytical problems and provide robust solutions based on solid technical background.

As a Senior Mechanical Engineer for our Value Engineering team at ASM, you will play a pivotal role in enhancing aftermarket product value by refining designs, streamlining manufacturing processes, and reducing costs. This role is focused on achieving the ideal balance between functionality, reliability, and cost efficiency in a highly competitive, innovation-driven market.

Key Responsibilities

• Ensure quality of aftermarket parts by collaborating closely with suppliers, resolving issues related to parts falling outside of specifications, and working with Engineering to document and implement corrective actions.
• Engage with customers and local account teams to address field reported issues related to aftermarket part performance and quality.
• Lead and implement ASM process protocols, frequently reviewing and enhancing field service solutions.
• Manage Continuous Improvement Projects (CIPs) and ensure clear communication across teams and with external partners.
• Define project scopes, generate detailed reports, and track progress against timelines.
• Collaborate with global teams—including technicians, engineers, procurement, manufacturing, and management—to address project-specific requirements.
• Deliver reliable, high-quality solutions and develop new Best-Known Methods (BKMs) for field and customer use.
• Travel domestically and internationally as needed (10–20%).
• Maintain a strong commitment to safety in all activities.

Qualifications

• Bachelor’s degree in mechanical engineering or a related field
• Minimum 3 year hardware and process engineering experience within the semiconductor industry; strong understanding of semiconductor fab operations required; ASM specific experience desired
• Proficient in reviewing 3D CAD models and interpreting/redlining engineering drawings.
• Demonstrated ability in cross-functional communication, data analysis, and presentation; strong interpersonal skills for working with suppliers, internal teams, and customers
• Experience in executing Failure Analysis (FA), including planning, real-time reporting, and timely closure of corrective actions.
• Previous experience in Supplier Quality Control is a plus     
• Solid understanding of materials, including metals, plastics, coatings, and finishes.
• Knowledge of deposition technologies (CVD, ALD, EPI, PVD) is a plus.
• Proficiency in Microsoft Office, Creo, and AutoCAD; experience with FEA and CFD analysis is preferred.
• Strong understanding of ANSI Y14.5 standards for geometric dimensioning and tolerancing