** This position is not eligible for visa sponsorship for external candidates. Candidates cannot require sponsorship now or in the future**

Job’s mission

Our Global Sales, Services & Spares IQ and Sustaining teams are seeking Snr Engineers I & II, Field Service (level will depend on experience, degree and responsibilities. Please review below) to join ASM at a customer site (TSMC) in North Valley, AZ. Domestic and International travel of at least 75% will be required for this role. As a Senior Field Service Engineer at ASM, you’ll play a critical role in supporting the advanced semiconductor equipment that powers the world’s most transformative technologies. You’ll take the lead on complex troubleshooting, guide and mentor engineers, and strengthen our partnerships by helping customers achieve stable, high‑performance fabrication environments. Your expertise will make a direct impact on tool reliability, customer satisfaction, and the next generation of ASM technology.

What you will be working on

Senior Engineer I, Field Service

• Install, maintain, and repair ASM semiconductor equipment with minimal supervision
  • Lead troubleshooting of complex tool or process issues using structured diagnostic methods
  • Perform root‑cause analysis and recommend targeted, data‑driven corrective actions
  • Review tool‑performance data to identify trends, risks, or improvement opportunities
  • Provide technical guidance and on‑the‑job coaching to less‑experienced engineers
  • Document service activities and support updates to procedures and best practices
  • Communicate solutions, progress, and expectations clearly with customer engineers
  • Participate in escalations alongside cross‑functional ASM engineering teams

Senior Engineer II, Field Service

• Serve as the senior technical lead for equipment installation, performance optimization, and recovery
• Diagnose and resolve highly complex, multi‑factor tool and process issues with limited guidance
• Lead advanced root‑cause analysis and drive long‑term corrective‑action plans that influence global engineering improvements
•  Own the customer‑technical relationship: build trust, anticipate operational needs, and act as ASM’s senior technical representative onsite
• Manage escalations end‑to‑end, aligning expectations, coordinating cross‑functional teams, and communicating clear action plans
• Guide, mentor, and develop engineers through hands‑on instruction, structured training, and knowledge‑sharing
• Champion best practices and contribute to procedure development, improvements, and field‑wide learning
•  Provide detailed field insights to R&D, product, and design teams, including support for beta tools or early‑option deployments

What we are looking for

Senior Engineer I, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 6+ years of experience, OR a Master’s degree with 4+ years of experience OR PhD degree with 0+ years of experience.
• Experience of semiconductor field service or capital‑equipment experience
• Ability to interpret electronic and electromechanical schematics
•  Experience with structured troubleshooting methodologies
• Knowledge of cleanroom and semiconductor safety protocols
• Strong written and verbal communication skills
• Ability to work independently and collaboratively in fast‑paced fab environments
• Willingness to travel domestically and internationally as needed for the role. 
• Proficiency in MS Office

Senior Engineer II, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 8+ years of experience, OR a Master’s degree with 6+ years of experience OR PhD degree with 4+ years of experience.
• Experience in semiconductor field service experience with demonstrated technical leadership
• Advanced knowledge of tool architecture, control algorithms, and multi‑factor troubleshooting
• Experience driving structured root‑cause analysis and long‑term corrective‑action plans
• Proven ability to lead escalations and manage customer‑technical relationships
• Strong communication and mentorship capabilities
• Ability to work autonomously while guiding and developing other engineers
• Willingness to travel domestically and internationally as needed for the role
• Proficiency in MS Office

What sets you apart

Senior Engineer I, Field Service

• Experience supporting beta tools or early‑option equipment
• Knowledge of wafer‑fab operations, robotics, vacuum systems, plasma, RF, or gas handling
• Experience writing or updating procedures or technical documentation
• Strong customer‑service approach and organizational skills
• Familiarity with structured problem‑solving methods

Senior Engineer II, Field Service

• Demonstrated leadership in complex troubleshooting programs or technical initiatives
• Experience owning customer‑technical relationships, including expectations and long‑term partnership building
• Strong capability in mentoring and developing field engineers
• Hands‑on expertise with fab robotics, vacuum systems, plasma, RF, or gas‑delivery systems
• Experience providing structured feedback to engineering or product teams
• Experience evaluating or supporting beta‑stage or early‑option tools

** This position is not eligible for visa sponsorship for external candidates. Candidates cannot require sponsorship now or in the future**

As a Field Service Engineer – Early Career, you’ll take on a hands-on role supporting ASM’s advanced semiconductor equipment and helping our customers keep their fabs running at peak performance. You’ll build real-world expertise through structured training, mentorship, and on-the-job learning while working directly with technologies that power AI, 5G, cloud computing, and next‑generation devices. This is your chance to apply your engineering background, strengthen your technical capabilities, and join a team that’s shaping the future of semiconductor innovation.

In this role, based in North-Valley/Phoenix, AZ at our customer site, you’ll launch your engineering career at the center of cutting‑edge semiconductor manufacturing. It’s an ideal opportunity for early‑career engineers who want to put their education into practice in a high‑tech environment where every day brings something new to learn.

From your first day, you’ll receive training through hands‑on guidance from seasoned engineers onsite. You’ll work with vacuum systems, plasma, chemical delivery, robotics, sensors, advanced metrology, and complex hardware‑software interactions. Your contributions will have a direct impact on tool performance, system uptime, and customer success—playing a meaningful role in enabling leading‑edge logic technology nodes. This experience lays a strong foundation for rapid growth, technical mastery, and a variety of long‑term career paths within ASM.

Shifts available:

Mon-Fri- 8am-5pm (subjected to OT)

What You Will Be Working On 

• Support installation, maintenance, and repair of ASM semiconductor equipment at customer sites 
• Troubleshoot equipment and process issues with guidance from senior engineers 
• Deliver clear, timely, customer‑focused support with a strong safety mindset 
• Working in cleanroom environments while following strict safety and quality standards.
• Assist in identifying and contributing to continuous improvement efforts  
• Participate in customer escalations alongside experienced team members 

What We Are Looking For 

• Bachelor’s or master’s degree in Electromechanical Engineering, Electrical Engineering, Mechanical Engineering, or related field 
• Candidates who are hands-on and mechanically curious, energized by complex systems and real-world problem solving, Comfortable working in fast paced, hightech environments & motivated to build a long-term engineering career. 
• Internship, co‑op, senior design project, lab research, or hands‑on technical experience 
• Ability to read and interpret basic electronic and electromechanical schematics 
• Understanding of safety protocols and willingness to work in cleanroom environments 
• Strong problem‑solving mindset and eagerness to learn 
• Clear communication skills and a strong customer-service mindset 
• Ability to work independently and collaboratively 
• Willingness to travel domestically and internationally 
• Proficiency with Microsoft Office 

What Sets You Apart 

• Demonstrated commitment to safety, quality, and disciplined execution 
• Exposure to semiconductor processes, wafer fabs, robotics, vacuum systems, plasma, or gas handling 
• Experience writing technical documentation in school or project settings 
• Familiarity with customer‑facing or support roles (internships, tutoring, help desk, teamwork) 
• Interest in structured problem‑solving methods, statistical methods, data analysis. 
• Curiosity and learning orientation when working with advanced semiconductor technologies 
• Participation in engineering clubs, competitions, or technical student groups 

Why join ASM? 

2026 is the year to join ASM as a Field Service Engineer. Apply now! 

We are thrilled to announce an opportunity for a Field Superintendent to join our team and support the construction of some of the most challenging and exciting projects in the Southwest. This includes innovative and impactful work in commercial, industrial, mission-critical, and water/wastewater treatment facilities. If you are passionate about leading dynamic teams and driving excellence in construction, we want to hear from you!

Responsibilities 

• Emphasizes a culture of exceptional safety and best-in-class quality to all foremen and craft, including associated trade partners. 
• Responsible for supporting and developing Foremen, including fostering a positive environment for our craft and trade partners to prosper. 
• Provides guidance and support to the Field Engineer regarding survey and layout needs, including providing a schedule as to when such work is required. 
• Assists the Project Superintendent with project schedule development and maintenance, including pull plans, look-ahead schedules, and implementation of the Last Planner System 
• Prepares work plans for critical work and facilitates detailed reviews of such plans with the Field Engineer and Foreman 
• Understands budgeted values for labor, equipment, and consumables; responsible for collaboratively planning work with the Foremen to be commercially successful. 
• Responsible for ensuring efficient crew sizing and makeup is always present and adjusting when necessary. 
• Ensures Foremen are promptly and accurately completing all necessary reports and documentation for their crews (timesheets, daily reports, safety/quality forms, employee evals etc.) 
• Leads coordination and Support for all QC processes for their specific scope or assigned project. 
• Actively participates in daily and weekly project meetings. 
• Promptly reports field issues to the Field Engineer and Project Superintendent 
• Assists this Field Engineer with the development of lift drawings. 
• Develops rapport with owners, clients, engineers, and trade partners while ensuring contractual compliance with all parties. 

#CORBIND1

• Planning and safe execution of Hazardous energy control, T&E, Working at Heights, and confined space. 

Qualifications   

• Working knowledge of all aspects of construction and industry practices, processes, standards, and their impact on project activities 
• Ability to multi-task, collaborate with others, set priorities, and take initiative. 
• Demonstrated success supporting a team through complex project execution. 
• Experience leading project teams and holding them accountable to project goals. 
• Excellent organizational, verbal, written, presentation skills are a must. 
• Proficiency with Microsoft Office Suite (Outlook, Word, Excel, PowerPoint, etc.) 
• STSC trained. 
• Proficiency with Primavera P6 scheduling software a huge plus. 
• Positive and teachable attitude. 
• Possesses excellent organizational, verbal, written and presentation skills. 

Education & Certifications 

• OSHA 30 Certification 

Safety Level
This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

• The inherent responsibilities of your role may include physical working conditions. In order to safely and successfully perform job duties you must be able to:  
• Potentially lift up to 50 pounds 
• Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing  
• Potentially operate a motor vehicle, crane, tractor, etc.  
• We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance to the Americans with Disability Act (ADA)

As the Virtual Construction Field Engineer, you will support the Nox Innovations virtual design team and broader Nox Group construction installation teams with research and validation in the field. This will include design, trade coordination, layout, installation coordination, and validation.

Responsibilities

• Manage the Asset Routing submissions daily by
  • Providing support to the field on routing processes from Virtual Construction (VC) teams
  • Ensuring routing plans are reviewed and constraints are logged and followed up on by Nox Group’s field personnel and Virtual Construction.
• Coordinate & manage internal and external constraints during the modeling process by
  • Maintaining a daily VC constraint log
  • Coordinate constraint resolution
  • Attend VC internal and external coordination meetings to document and coordinate constraints and assist in coordination resolution
  • Monitor & share weekly constraint progression with the project & VC teams
• Assist with the constructability review in the field.  
• Assist the installation team with understanding the scope as needed
• Perform field validations of installation against the design to ensure the design is being followed and report any design to installation deviations to VC Project Engineer
• Provide total station layout points on site as needed.
• Assist installers with knowledge of how to understand and navigate the model and sheet sets, including PF part labels.
• Perform daily coordination between the VC Project Coordinator and the onsite field operations teams to ensure the model and design are aligned.
• Provide updates and support to the VC Project Manager to ensure continuity between the VC Engineers and the onsite Field Operations

Qualifications

• 5+ years’ experience in the construction field, electrical a bonus
• 2+ years’ experience in CAD
• Experience in Project Layout
• Ability to stand for long hours and walk job sites
• Ability to climb a ladder
• Ability to lift up to 45 lbs
• Excellent written and verbal communication ability
• Organized, systematic, and competent in performing detailed tasks
• Has a strong ability to be a team player and leader
• Self-starter and motivated to work efficiently and effectively
• Must possess outstanding interpersonal skills
• Cultural fit—ability to build positive working relationships

Education/Certifications

• High school diploma or G.E.D. equivalent

Safety Level
This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

• The inherent responsibilities of your role may include physical working conditions. In order to safely and successfully perform job duties you must be able to:  
  • Potentially lift up to 50 pounds 
  • Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing  
  • Potentially operate a motor vehicle, crane, tractor, etc.  
• We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance with the Americans with Disability Act (ADA)

#NXCLIND1 

Job's Mission:

As a Software Quality Assurance Engineer at ASM, you will ensure the reliability and effectiveness of our software that drives cutting-edge semiconductor processing equipment. You’ll work on testing and qualifying software, streamlining QA processes to align with CI/CD development, and collaborating with talented global teams. Your contributions will directly impact the functionality and performance of advanced hardware in the semiconductor industry.

What you will be working on:

• Design, develop, test, deploy, maintain, document, and improve software test suites.
• Perform both manual and automated testing in simulation environments and on physical semiconductor manufacturing equipment.
• Execute and analyze the functionality of engineering designs compared to intended outcomes, providing valuable feedback.
• Automate, streamline, and maintain QA processes to integrate seamlessly with CI/CD development workflows.
• Develop and implement quality standards, methods, and procedures to enhance existing business processes.
• Work closely with Process Engineering teams to test systems, validate engineering designs, and identify quality improvements.
• Create and manage tests plans and test cases, ensuring thorough validation of software enhancements and defect fixes.
• Gain an understanding of ASM system operations, including mechanical, electrical, and software functionality.
• Document testing procedures and feedback to ensure quality and consistency across projects.

What we are looking for:

• Bachelor’s + 5 years of experience, Master's +3 years OR PhD + 2 years of experience. Degree in Computer Science, Computer Engineering, or a related field.
• Proficiency in programming languages such as Python, C++, or C#.
• Experience with system quality assurance or engineering for complex electromechanical equipment with integrated software controls.
• Strong written and verbal communication skills for interacting with senior leadership and stakeholders.
• Willingness to travel up to 10% of the time.

What sets you apart

• Familiarity with tools like Jira, Confluence, Git, Test Complete, or TestRail.
• Experience in software configuration management or versioning in a software development environment.
• Knowledge of DevOps and CI/CD pipeline setup.

This role is responsible for leading electrical commissioning efforts within complex construction and mission-critical environments. The position works closely with multidisciplinary teams including engineering, construction, and controls to ensure systems are delivered safely, efficiently, and in accordance with project requirements. The individual will play a key role in driving system readiness, performance, and successful project turnover.

Responsibilities:

• Lead electrical commissioning activities across all project phases, from design review through energization, testing, and final handover.
• Review electrical designs, one-line diagrams, specifications, and control schematics to ensure systems are commissionable and aligned with project requirements.
• Plan and coordinate installation verification, pre-functional checks, energization, and functional testing for electrical systems.
• Oversee QA/QC walkdowns to confirm installation quality and readiness for commissioning.
• Lead and manage safe energization of electrical systems including switchgear, transformers, UPS, and distribution networks.
• Coordinate closely with mechanical, controls/BMS, and construction teams to ensure system integration and readiness.
• Develop and manage electrical commissioning procedures, checklists, and test scripts.
• Identify, track, and drive resolution of commissioning issues through to closure.
• Utilize commissioning tools and platforms to monitor system status, readiness, and progress against project schedules.
• Lead commissioning meetings and provide clear reporting on electrical system readiness, risks, and progress.
• Ensure all electrical systems meet design intent, safety requirements, and client performance expectations prior to handover.
• Support system turnover including documentation completion, as-built verification, and client handover requirements.
• Provide technical leadership, guidance, and mentorship to commissioning engineers and technicians.
• Promote and enforce a strong safety culture, including strict adherence to LOTO, arc flash, and energization procedures.
• Any other duties or responsibilities that may be assigned to you in your role.

Skills Required:

• Strong knowledge of electrical power systems including switchgear, transformers, UPS, and distribution systems.
• Proven experience leading commissioning activities within mission-critical or large-scale construction environments.
• Ability to review and interpret electrical drawings, one-lines, and control schematics.
• Strong understanding of commissioning processes including pre-functional, functional, and integrated testing.
• Experience managing energization procedures and working in high-risk electrical environments.
• Proficiency with commissioning tools and platforms for tracking system readiness and issue resolution.
• Excellent leadership, communication, and stakeholder coordination skills.
• Strong problem-solving skills with the ability to drive issues through to resolution.
• High attention to detail with strong documentation and reporting capabilities.
• Commitment to safety, quality, and compliance with industry standards.

Education / Licenses / Certifications:

• Bachelor’s degree in Electrical Engineering or related field preferred.
• OSHA 10 or OSHA 30 certification preferred.
• NETA certification preferred.
• Professional Engineer (PE) license preferred.
• Proof of education, licenses, and certifications will be required where applicable.

Benefits:

• Medical, Dental and Vision Insurance 
• Life, Short-Term, Long-Term Disability Insurance 
• Training and Education Assistance 
• 401k Retirement Plan 
• Extra Annual Leave with Years of Service 
• Maternity/Paternity Leave 
• Recognition Rewards
  

#INDHP

This role is responsible for supporting the commissioning and startup of medium-voltage electrical systems within complex industrial and mission-critical environments. The position collaborates closely with clients, contractors, utilities, and engineering teams to ensure systems are delivered safely, efficiently, and in accordance with project requirements. The individual will play a key role in driving quality, compliance, and successful system turnover.

Responsibilities:

• Perform commissioning of medium-voltage switchgear, substations, and associated electrical infrastructure.
• Support commissioning of utility interconnections and service entrance systems.
• Commission transformers, protective relays, and grounding systems in accordance with project requirements.
• Oversee commissioning of medium-voltage distribution systems feeding UPS, PDUs, and critical loads.
• Develop, review, and execute commissioning plans, procedures, scripts, and test protocols.
• Coordinate commissioning activities with owners, engineers, contractors, utilities, and Authorities Having Jurisdiction (AHJs).
• Validate system readiness through inspections, functional testing, and integrated systems testing.
• Identify deficiencies, track issues, and verify corrective actions through to closeout.
• Ensure compliance with project specifications, applicable codes and standards (NFPA, NEC, IEEE, NETA, OSHA), and client commissioning requirements.
• Provide on-site technical leadership and mentorship to commissioning staff and field teams.
• Support system start-up, energization, and turnover activities while maintaining strict adherence to safety controls.
• Maintain detailed commissioning documentation, reports, and final turnover records.
• Any other duties or responsibilities that may be assigned to you in your role.

Skills Required:

• Strong knowledge of medium-voltage electrical systems, including switchgear, substations, and power distribution.
• Familiarity with electrical testing standards and practices (NETA, IEEE, NFPA, NEC).
• Proven ability to develop and execute commissioning plans and procedures.
• Strong understanding of system integration, functional testing, and startup processes.
• Excellent troubleshooting and problem-solving skills within energized or pre-energized environments.
• Effective communication and coordination skills with multidisciplinary project teams and stakeholders.
• Ability to lead and mentor field personnel in a fast-paced construction or commissioning environment.
• Strong attention to detail with excellent documentation and reporting capabilities.

Education / Licenses / Certifications

• Bachelor’s degree in Electrical Engineering or related field preferred.
• NETA certification preferred.
• OSHA 10 or OSHA 30 certification preferred.
• Professional Engineer (PE) license preferred.
• Proof of education, licenses, and certifications will be required where applicable.

Benefits:

• Medical, Dental and Vision Insurance 
• Life, Short-Term, Long-Term Disability Insurance 
• Training and Education Assistance 
• 401k Retirement Plan 
• Extra Annual Leave with Years of Service 
• Maternity/Paternity Leave 
• Recognition Rewards
  

#INDHP

Job Title: Project Engineer

Company: Loenbro, LLC
Business Unit/Department: Engineering                                           
Location: Arizona
Reports to:  Senior Project Manager
Employment Type: Full-Time
FLSA Classification: Exempt

About Loenbro

Loenbro is a trusted, long-term construction lifecycle partner to thousands of customers across the U.S. Our market spans all industries and our service offerings include Critical Electrical, Mechanical & Structural, Soft Crafts, Inspection, Underground Maintenance and Installation, and Fabrication. Our expertise lies in simplifying the complex and establishing long-standing relationships with our partners. We have a national presence but a local approach—every customer benefits from our capabilities and our care.

At Loenbro, we don’t just offer jobs—we build careers grounded in integrity, teamwork, excellence, and purpose. Join a team where your expertise is valued, your growth is supported, and your work helps maintain and enhance the critical infrastructure that powers communities across the nation.

Job Summary
Loenbro is currently looking for a Project Engineer to join the team. You will be a key member of our project management team, responsible for overseeing and managing the technical aspects of mission-critical and data center projects. Your expertise in electrical engineering and project management will contribute to the successful execution of projects.

Essential Job Responsibilities

• Project Planning: Collaborate with Project Managers to develop project plans, including scope, schedule, and budget.
• Technical Expertise: Utilize your electrical engineering knowledge to design, review, and ensure the proper installation of electrical systems, adhering to industry standards and best practices.
• Documentation: Create and maintain accurate project documentation, including technical drawings, specifications, and reports.
• Coordination: Coordinate with project teams, contractors, and subcontractors to ensure the smooth execution of projects.
• Quality Assurance: Conduct inspections and quality control checks to ensure that all work meets safety regulations and quality standards.
• Problem Solving: Address technical challenges and issues as they arise during the project, proposing effective solutions.
• Client Interaction: Interact with clients to understand their technical requirements and provide technical support and expertise as needed.

Other duties may be assigned as needed to support business operations.

Minimum Qualifications

Required:

• 1-3 years of experience as a project engineer, preferably in the electrical construction industry or bachelor’s degree in electrical engineering or a related field (preferred).
• Strong technical knowledge of electrical systems and engineering principles.
• Proficiency in AutoCAD or other design software.
• Excellent communication and interpersonal skills.
• Ability to work independently and as part of a team.
• Strong problem-solving and decision-making abilities.
• Commitment to safety and quality.

Physical Demands and Work Environment

The physical demands and work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

Work Environment:

• Indoor office setting with controlled temperature.
• Outdoor industrial sites with exposure to noise, dust, chemicals, extreme weather, uneven terrain, or other environmental factors.
• Fabrication shops with exposure to noise, dust, chemicals, or other environmental factors.

This role requires compliance with all applicable safety regulations, personal protective equipment (PPE) requirements, and Loenbro's Environmental Health and Safety (EH&S) policies.

Benefits

Loenbro offers a competitive salary, comprehensive benefits package, and rewards to those who join our team:

• Medical, dental, and vision insurance
• 401(k) retirement plan with company match
• Paid time off (PTO) and holiday pay
• Life and disability insurance
• Professional development and training opportunities
• Employee assistance program (EAP)

Benefits eligibility may vary based on employment classification and hours worked.

Guided by Core Values (LEAD), grounded in grit and a commitment to excellence, Loenbro betters our families, customers, and local communities.  If you’re ready to be part of a company that LEADS by:

• Living with Integrity
• Exceeding Expectations
• Acting with Urgency
• Delivering Excellence

…we want to hear from you.

Loenbro is an Equal Opportunity Employer

Project Engineer - Mining 

Company: Loenbro, LLC                                                                             
Location: TBD
Employment Type: Full-Time

Job Summary:
Loenbro Southwest is seeking a Mining Project Engineer who will be responsible for supporting the Project Manager and other project participants as needed by ensuring the success of a project through the technical accuracy of all project aspects.

About Loenbro

Loenbro is a trusted, long-term construction lifecycle partner to thousands of customers across the U.S. Our service offerings include Critical Electrical, Mechanical & Structural, Soft Crafts, Inspection, Underground Maintenance and Installation, and Fabrication, and our vertical market focus spans all industries. Our expertise lies in simplifying the complex, so that our clients gain clarity and control in construction and maintenance. We do this by taking full ownership on every interaction, delivering multi-scope project excellence, and establishing long-standing relationships with our partners as we enhance and maintain your critical infrastructure. We have a national presence but a local approach—so that every customer benefits from our capabilities and our care. Through their relationship with us and the One Loenbro model, our customers are able to simplify, control, and succeed in the everyday.

Essential Job Responsibilities

•    Cooperating and communicating with the Project Manager and other project participants and collaborating with all team members to create more efficient project methods and to maintain the project's profitability.
•    For Projects that require Engineering, coordinate with the Preconstruction Group to attain the Engineering required.
•    Coordinate field test methods and methods for monitoring the quality of those tests based on project requirements and internal quality guidelines.
•    Maintain and organize all construction documentation including but not limited to contract drawings, fabrication drawings, specifications, change order documents, quality, and closeout documentation within the appropriate Procore tools and as outlined in the project requirements.
•    Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.
•    Gather and prepare data for submittal or transmittal to the customer, vendors, subcontractors, governmental agencies, and internal use.
•    Coordinate with Third Party Detailing Service for submittal or transmittal to the customer, vendors, subcontractors, governmental agencies, and internal use.
•    Coordinate field surveying, dimension, and field verification with Superintendent or subcontractor including elevation, control points, and compilation of as-built data.
•    Perform material take offs from drawings, specifications, and other contract documents.
•    Prepare purchase requisitions for required project materials and monitor delivery status in support of construction schedule, construction budget, and project specifications.
•    Provide all project administration and correspondence functions including permitting, bonding, and requests for information (RFIs).
•    Assist PM in the development of SSHEP’s and setting up Project Kick Off Meetings.
•    Assist PM in the development of Subcontract Agreements.
•    Assist PM with the development of the Schedule of Values for billing. 
•    Assist PM with the development of Estimates.
•    Coordinate with other Divisions on estimates.
•    Assist PM with Job Walks to ensure quality estimates are developed.
•    Ensure project estimate is compliant with Loenbro standards.
•    Assist PM to develop and maintain the Project schedule. MS Project experience is a must.
•    Integrate Estimate and Projects according to the latest Procore procedures.
•    Assist PM and Superintendent with Daily Planning.
•    Ensure the development of claiming schemes are set up and Quantity Tracking is performed on all Projects.
•    Update Estimate and Projects with change orders according to the PM.
•    Attend site meetings as needed.

Additional Responsibilities:
•    Performs other related duties as assigned.

Minimum Qualifications

Required:

•    Excellent verbal and written communication skills.
•    Excellent interpersonal and customer service skills.
•    Excellent organizational skills and attention to detail.
•    Excellent time management skills with a proven ability to meet deadlines.
•    Strong analytical and problem-solving skills.
•    Strong supervisory and leadership skills.
•    Ability to prioritize tasks and to delegate them when appropriate.
•    Ability to function well in a high-paced and at times stressful environment.
•    Proficient with Microsoft Office Suite or related software.
•    Proficient with Microsoft Project software.
•    Mining and Open Pit Experience Necessary
•    MSHA Related Compliance Knowledge.
•    Diverse Background knowledge in Fabrication, Steel Erection, Piping, Mechanical, Equipment Setting, Concrete, Civil, and Electrical preferred. At least 50% of Expectations is a must.
•    Understands Mining Equipment such as Crushers, Mills, Flotation Equipment, Moly Plants, Thickener Tanks, Smelters, Acid Plants, Process Equipment, Piping- Carbine-Stainless Steel- HDPE- PVC/CPVC, and SX Plants. 
 
Education and Experience:
Bachelor’s degree in engineering or a similar field
Mining/ MSHA Experience- 2-3 years or more

Physical Demands and Work Environment

The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

Work Environment:

• Indoor office setting with controlled temperature.
• Outdoor industrial sites with exposure to weather extremes.
• Potential exposure to noise, dust, chemicals, or other environmental factors.
• Travel requirements: up to 10% of time.

This role requires compliance with all applicable safety regulations, personal protective equipment (PPE) requirements, and Loenbro's Environmental Health and Safety (EH&S) policies.

Benefits

Loenbro offers a competitive salary, comprehensive benefits package, and rewards to those who join our team:

• Medical, dental, and vision insurance
• 401(k) retirement plan with company match
• Paid time off (PTO) and holiday pay
• Life and disability insurance
• Professional development and training opportunities
• Employee assistance program (EAP)

Benefits eligibility may vary based on employment classification and hours worked.

Our Core Values

LEAD with Values:

• Live with Integrity – We do the right thing and do what we say, in every Interaction - and practice stewardship to car for the communities where we live & work.
• Exceed Expectations – We anticipate customer needs, deliver Innovative solutions, and dedicate ourselves to creating outcomes that make a real difference.
• Act with Urgency – We take action, adapt seamlessly, and keep projects moving without compromising quality - because our customers priorities are our priorities.
• Deliver Excellence – We combine our passion for quality, our Industry expertise, and our eye for Innovation to make excellence our standard.

Guided by core values, grounded in grit and a commitment to excellence, Loenbro maintains and enhances the industrial infrastructure that betters our families, customers, and local communities.

Loenbro is an Equal Opportunity Employer.

Senior Engineer I, Software Engineering

As part of ASM’s Software Engineering team, you’ll develop advanced control software that drives the most sophisticated semiconductor equipment in the world. Your work will directly impact robotics, gas flow systems, and temperature control hardware—delivering real-time results in chip manufacturing. Based in Phoenix, you’ll collaborate globally and help shape the future of semiconductor automation and factory integration.

Responsibilities:

• Design, develop, test, deploy, and maintain software for semiconductor manufacturing equipment
• Build software for Windows and real-time operating systems
• Troubleshoot and resolve issues in real-time control systems
• Triage mechanical, electrical, and software bugs
• Lead escalation calls with field engineers and global customers
• Collaborate with QA and Support teams to manage regression testing
• Author and review system specifications, software designs, and test plans
• Investigate internal and external problem reports and propose solutions
• Evaluate and recommend software engineering tools
• Participate in system design and scheduling efforts
• Integrate and support factory automation protocols such as SECS/GEM
• Work closely with automation teams to ensure seamless equipment-factory communication

Requirements:

• BS Degree in Computer Science or related field. MS preferred.
• Strong software development skills in C#
• 5+ years’ experience as a generalist or mid-stack software developer
• Experience in the semiconductor industry
• Hands-on experience with factory automation systems
• Familiarity with SECS/GEM, GEM300, EDA/Interface A protocols
• Experience with AMHS (Automated Material Handling Systems)

What sets you apart

• 10+ years in software development and architecture
• Experience with:
  • Machine control software (especially for semiconductor equipment)
  • Windows and real-time operating systems
  • Multi-threaded and real-time applications
  • GUI development and device drivers
  • Networking, data communications, and EtherCAT
  • Dynamic scheduling algorithms with deadlock avoidance

Senior Engineer I, Software Engineering - Factory Automation 

As part of ASM’s Software Engineering team, you’ll develop advanced control software that drives the most sophisticated semiconductor equipment in the world. Your work will directly impact robotics, gas flow systems, and temperature control hardware—delivering real-time results in chip manufacturing. Based in Phoenix, you’ll collaborate globally and help shape the future of semiconductor automation and factory integration.

Responsibilities:

• Design, develop, test, deploy, and maintain software for semiconductor manufacturing equipment
• Build software for Windows and real-time operating systems
• Troubleshoot and resolve issues in real-time control systems
• Triage mechanical, electrical, and software bugs
• Lead escalation calls with field engineers and global customers
• Collaborate with QA and Support teams to manage regression testing
• Author and review system specifications, software designs, and test plans
• Investigate internal and external problem reports and propose solutions
• Evaluate and recommend software engineering tools
• Participate in system design and scheduling efforts
• Integrate and support factory automation protocols such as SECS/GEM
• Work closely with automation teams to ensure seamless equipment-factory communication

Requirements:

• BS Degree in Computer Science or related field. MS preferred.
• Strong software development skills in C#
• 5+ years’ experience as a generalist or mid-stack software developer
• Experience in the semiconductor industry
• Hands-on experience with factory automation systems
• Familiarity with SECS/GEM, GEM300, EDA/Interface A protocols
• Experience with AMHS (Automated Material Handling Systems)

What sets you apart

• 10+ years in software development and architecture
• Experience with:
  • Machine control software (especially for semiconductor equipment)
  • Windows and real-time operating systems
  • Multi-threaded and real-time applications
  • GUI development and device drivers
  • Networking, data communications, and EtherCAT
  • Dynamic scheduling algorithms with deadlock avoidance

Engineer, Software Support

At ASM, our Software Engineering teams works on delivering software that has immediate, tangible results visible in the operation of semiconductor processing equipment hardware. The hardware includes robotics, gas valves, temperature controllers and other hardware.  

As a Software Support Engineer, you will make an impact by investigating, recreating, and troubleshooting software issues to resolution as reported by our customers. 

Responsibilities:

• Gather information to investigate the issue, reproduce it, determine the root cause, and recommend corrective actions. 
• Troubleshoot and resolve software issues, including embedded software for control systems.  Able to triage mechanical, electrical, and software bugs. 
• Responsible for managing escalation calls with field support engineers 
• Create bug reports for the developer to use when fixing the bug. 
• Work with QA to add replicated bugs to the regression. 
• Travel to customer sites to support installations, training, and troubleshooting of ASM products. 
• Talking to the account team and GPS group (not directly with the customer) when investigating reported issues. 
• The team will handle all issues until they are ready to send to the developer.  

Minimum Qualifications 

• BS+ 4 years experience or MS+ in Computer Science, Computer Engineering, or a related field. 
• Ability to read code and diagnose issues.  
• Software development or test (QA) experience. 
• Ability to travel 10-25% domestic and international.

Preferred Qualifications 

• Preferred expertise in C/C++, C#, Python, Gitlab/Github.
• Experience with semiconductor equipment preferred 
• Experience working with two or more of the following is preferred: software for machine control, Semiconductor Factory Automation, Multi-threaded applications, real-time software, device drivers, or other interrupt-driven software 

Senior Engineer, Software Support

At ASM, our Software Engineering teams works on delivering software that has immediate, tangible results visible in the operation of semiconductor processing equipment hardware. The hardware includes robotics, gas valves, temperature controllers and other hardware.  

As a Senior Software Support Engineer, you will make an impact by investigating, recreating, and troubleshooting software issues to resolution as reported by our customers. 

Responsibilities:

• Gather information to investigate the issue, reproduce it, determine the root cause, and recommend corrective actions. 
• Troubleshoot and resolve software issues, including embedded software for control systems.  Able to triage mechanical, electrical, and software bugs. 
• Responsible for managing escalation calls with field support engineers 
• Create bug reports for the developer to use when fixing the bug. 
• Work with QA to add replicated bugs to the regression. 
• Travel to customer sites to support installations, training, and troubleshooting of ASM products. 
• Talking to the account team and GPS group (not directly with the customer) when investigating reported issues. 
• The team will handle all issues until they are ready to send to the developer.  

Minimum Qualifications 

• BS+ 8 years or MS+ 4 years in Computer Science, Computer Engineering, or a related field. 
• Ability to read code and diagnose issues.  
• Software development or test (QA) experience. 
• Ability to travel 10-25% domestic and international.

Preferred Qualifications 

• Preferred expertise in C/C++, C#, Python, Gitlab/Github.
• Experience with semiconductor equipment preferred 
• Experience working with two or more of the following is preferred: software for machine control, Semiconductor Factory Automation, Multi-threaded applications, real-time software, device drivers, or other interrupt-driven software 

Role overview

As a Senior Process Engineer at ASM, you will work with semiconductor processing and analytical equipment to research, develop and optimize processes focused on oxidation, annealing, curing, Atomic Layer Deposition (ALD, PEALD), Epitaxy or PECVD for logic, memory, analog, power, and MEMS applications. You will design and conduct complex experiments, measurements and perform the interpretation of complex experimental output. While you deliver creative and inventive solutions, technical publications, and generation of Intellectual Property (IP) are an essential function of this position. 

Note: This role is intended for candidates who are graduating in Spring 2026 or have graduated within the past two years and have 0–2 years of professional work experience.

Responsibilities 

• Creative problem solver with experience in developing new films for emerging applications and experience in chemistry/materials characterization.
• Works with semiconductor processing equipment to research, develop and optimize unit processes focused on the deposition of metal and dielectric films via ALD, PEALD, Epitaxy, and/or PECVD.
• Bringing innovative ideas, staying abreast of state-of-the-art processing applications in the semiconductor industry to be effective.
• Process consulting and accountability including technical papers on advanced process applications and Intellectual Property creation.
• Participates in and drives technical problem-solving sessions using the related scientific method and industry tools, such as Ishikawa diagrams.
• Designs and conducts experiments, in addition to measuring and interpreting experimental output, aimed at fulfilling stated objectives using Design of Experiments (DOE) and Response Surface Methodology (RSM).
• Troubleshoots equipment problems and is personally and actively engaged in problem via “hands-on” modalities.
• Works with customers and central marketing to understand and define requirements to successfully execute and document customer demonstrations.
• Develops methods and techniques for integrating metal and/or oxide films into existing and future device technologies.
• Ensures successful product transfer to customer base by performing demonstrations, training field service personnel, traveling to support remote sites (up to 10% travel required), and drafting documentation regarding process development, tool operation and maintenance.
• Produces technical papers on process, equipment, and device integration improvement strategies and presents to professional audience.
• You may be assigned supervisory duties over supporting process engineering technicians and aides. These supervisory duties could include direct input into employees’ performance evaluations, discipline, and discharge.

Minimum Qualifications

• We are looking for candidates who have graduated within the last 0-2 years or will graduate in Spring or Fall 2025 and are eager to begin or advance their career.
• Master’s or PhD degree in Chemical Engineering, Materials Science, Electrical Engineering, or Physics.
• 0-7+ years of combined education, research, and work experience with:
• Cure, oxidation, ALD, CVD, Epitaxy, PECVD and/or other thin film deposition.
• Materials characterization techniques such as XPS, SIMS, RBS, AFM, XRR, XRD, TEM, SEM and ellipsometry.
• Knowledge of electrical characterization techniques for CMOS devices.
• Application of dielectric and/or metal films for logic and memory structures.
• Training in CFD (computational fluid dynamics), either theoretical or practical is preferred.
• Knowledge of electrical characterization techniques for CMOS devices is preferred.
• Graduating in Fall 2025 or graduated within the past two years.
• 0–2 years of professional work experience.

Preferred Qualifications

• Ability to independently manage complex process development projects, including personnel, project schedules, experimental thrusts, hardware procurement and budgetary oversight.
• Ability to be a process consultant to internal and external customers.
• An authority on interplay between hardware design (e.g., chemical reactor design) and operation and process outputs
• Understanding of requirements for integration of metals as work function materials and barrier layers in FEOL and BEOL process flows
• Demonstrated ability to develop and completely characterize deposition processes using first principles and experimental design techniques (e.g., DOE, RSM).
• Experience with the theory, practice, and interpretation of materials characterization techniques such as XPS, SIMS, RBS, AFM, XRD, HRTEM, FESEM, Auger, Raman and ellipsometry.
• Excellent verbal and written communication skills, with ability to clearly communicate advanced technical constructs in direct and concise manner.

This role supports the commissioning and startup of electrical systems within complex construction and mission-critical environments. The position works closely with commissioning engineers, construction teams, and controls specialists to ensure systems are installed, tested, and energized safely and efficiently. The individual will play a key role in supporting system readiness, testing, and successful project handover.

Responsibilities:

• Support commissioning activities across all project phases, from design review through energization, testing, and final handover.
• Review electrical drawings, one-line diagrams, specifications, and control schematics to understand system design and identify potential issues.
• Perform installation verification and QA/QC walkdowns for electrical systems including switchgear, panels, transformers, UPS, and distribution systems.
• Execute pre-functional checklists to ensure systems are safe, complete, and ready for energization.
• Verify critical pre-energization requirements including insulation resistance (megger), continuity, torque checks, labeling, and grounding.
• Support safe energization of electrical systems in coordination with construction teams, vendors, and safety personnel.
• Assist with functional testing of electrical systems including power distribution, interlocks, alarms, and control sequences.
• Coordinate with controls and BMS teams to verify system integration and communication.
• Identify, document, and track commissioning issues through to resolution.
• Maintain accurate commissioning documentation including test records, checklists, and issue logs.
• Utilize commissioning tools and platforms to track system status, energization readiness, and testing progress.
• Participate in commissioning meetings and provide updates on system readiness and testing status.
• Support system turnover activities including completion of documentation and client handover.
• Follow all site safety procedures including LOTO and arc flash requirements while promoting a strong safety culture.
• Any other duties or responsibilities that may be assigned to you in your role.

Skills Required:

• Strong understanding of electrical systems including switchgear, transformers, UPS, and power distribution.
• Ability to read and interpret electrical drawings, one-lines, and control schematics.
• Familiarity with commissioning processes including pre-functional and functional testing.
• Knowledge of electrical testing methods such as insulation resistance (megger) and continuity testing.
• Understanding of safety procedures including LOTO and arc flash requirements.
• Strong attention to detail with excellent documentation and reporting skills.
• Effective communication and coordination skills across multidisciplinary teams.
• Ability to troubleshoot and resolve field issues in a fast-paced environment.
• Experience using commissioning or construction management software tools.
• Ability to work both independently and as part of a team.

Education / Licenses / Certifications:

• Associate’s degree in Electrical Engineering Technology or related field preferred.
• OSHA 10 or OSHA 30 certification preferred.
• Electrical or commissioning-related certifications preferred.
• Proof of education, licenses, and certifications will be required where applicable.

Benefits:

• Medical, Dental and Vision Insurance 
• Life, Short-Term, Long-Term Disability Insurance 
• Training and Education Assistance 
• 401k Retirement Plan 
• Extra Annual Leave with Years of Service 
• Maternity/Paternity Leave 
• Recognition Rewards
  

About the Role:

As the Sales/ Project Engineer for Ziplines Ground Systems and Site Infrastructure, you’ll spearhead the deployment success of Ziplines Offsite Charging sites, the game changing autonomous loading Zipping Point, and other site infrastructure. You’ll be handling all deployment topics, finding innovative solutions that work for partner sites, executing solutions to problems and roadblocks, and driving feedback and product changes to simplify and accelerate the rollout of Ziplines delivery infrastructure. This is a role well suited to technical engineers with great customer engagement skills - you’ll be crafting and designing solutions for new customers by listening to their feedback and needs, providing Zipline's fundamental perspectives and learnings and bringing all stakeholders along for the journey. As part of this you’ll engage in pre-contract discussions as the key technical stakeholder, the lead and manage those projects once signed from initial site evaluation through to construction and initial operation working across internal and external building and infrastructure teams, permitting and AHJ’s, installation teams and contractors, technical operations teams, and internal engineering and product teams.  You’ll work closely with the broader Engineering teams, Deployment and Construction team, Real Estate and Government Affairs,  Community Engagement and Legal teams teams to build strong relationships with key stakeholders and secure the necessary approvals to expand our network.

WHAT YOU’LL DO

• Work with customer teams and internal customer success teams to seamlessly integrate Zipline systems into both existing and newly designed infrastructure, including creating site layouts and related technical documents. Engage with partners’ internal teams to ensure alignment on expectations and timelines.
• Understand our internal and external customer’s business and needs and work with our internal engineering and business teams to refine and roadmap necessary product changes to ensure the successful deployment of the Ground Systems infrastructure. Maintain the high level customer specs and cut-sheets for the Zipline Systems. 
• Develop and lead pre-construction strategies to streamline entitlements and permits for Ziplines Ground System and Site Infrastructure projects. 
• Build and maintain strong relationships with Customer teams and technical staff, City Managers, staff, and City Council members and inspectors to facilitate smooth approvals and permit completion from Planning and Zoning commissions and AHJ’s. Collaborate closely with jurisdictions, land use counsel, Real estate team, and our Legal team to create pathways for deployments in evolving customer and regulatory landscapes.Source and foster relationships with external stakeholders, including local jurisdictions, utilities, and contractors.
• Understand and mitigate the preconstruction, construction, operational and sustaining  risks associated with each project. 
• Manage many parallel small construction projects, site infrastructure installments, construction contractors, and additional real estate development projects.
• Source and manage general contractors and subcontractors across various trades (construction, assembly, electrical) during bid, pre-construction, construction and site commissioning project phases. Evaluate all options and a lean budget, select best vendors to ensure reliable and quality services and products. Source and develop relationships with outside organizations (local jurisdiction, utilities, contractors, OEM and material suppliers etc).
• Develop and implement solutions to problems/projects/applications and associated systems from 0-1-100  across parallel projects and initiatives. 

WHAT YOU’LL BRING

• Bachelor’s degree in Engineering, Real Estate Development, Finance, Business Administration, Urban Planning, Architecture, Construction Management, or a related field 
• 4+  years of experience in a relevant field - technical sales of hardware products at scale, technical product management, real estate development or construction. Experience with technical sales and solution design of contractor installed equipment, and experience in the light commercial construction industry  is strongly preferred. 
• Proven ability to manage entitlements and permits for infrastructure projects in collaboration with internal and customers’ Real Estate and Construction teams. Familiarity with working alongside Authorities Having Jurisdiction (AHJs) to navigate permitting and inspection processes.
• Strong communication skills with the ability to align internal stakeholders on project requirements and provide leadership with regular updates on challenges, risks, and opportunities. Fluency in communicating ideas clearly, whether through quick sketches, sharp technical writing, or strategic presentations tailored to your audience.
• Experience working with External design teams (Architectural, Structural, Civil,Electrical MEPs) on commercial or industrial development  / construction projects. 
• Experience with CAD tools to develop site layouts, indicative construction designs and other technical drawings. 
• Based in the METRO region, with the flexibility to travel up to 20% domestically and internationally to support expansion projects.
• Must be eligible to work in the U.S.

What Else You Need To Know

Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws or our own sensibilities.

We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply! If you’d like to learn more about Zipline and our teams, feel free to check out our Instagram, one of our Reddit AMA’s, or our website!

We are seeking a skilled Engineer II, Electrical Engineering, to join our team, focusing on the design, development, and troubleshooting of electrical circuits for semiconductor tools. This role is pivotal in ensuring the safety and efficacy of our electrical systems, while collaborating with cross-functional teams to create cohesive tool architectures. 

Responsibilities: 

• Design, develop, test, and troubleshoot electrical circuits related to semiconductor tools 

• Ensuring safety is a priority in design and operation, utilizing safety-rated devices 

• Research and select components that meet tool requirements 

• Collaborate with cross-disciplinary teams to design unified tool architecture 

• Create schematic and cable designs 

• Adhere to the company's Engineering Change Order (ECO) process 

• Review documents meticulously, adapt to changes, handle tasks independently, and manage time effectively 

• Work closely with designers and drafters to generate detailed documentation 

• Understanding of pneumatics and PCB design is advantageous 

 Required Skills: 

• Bachelor’s degree in electrical engineering or related field 

• Proven experience in electrical circuit design and troubleshooting 

• Strong knowledge of safety standards and practices 

• Excellent verbal and written communication skills 

• Proficiency in technical writing 

• Familiarity with recognized safety and machinery standards such as NEC, NFPA 79, UL 508A, FM 4910, ISO 13849, EN/IEC 60204-1 & -33, SEMI specifications is a plus 

• Extensive Experience with AutoCAD (Cable Drawing and Schematic) 

• Experience in Design/Component selection 

Your Impact

Axon is committed to improving public safety by developing cutting-edge, innovative technologies. Known for developing the original TASER energy weapon, the Axon engineering team is tasked with continual excellence to keep the organization at the forefront of the market.

Mechanical Design Engineers at Axon have full design ownership over next generation life-saving technology from conceptualization through production, who's work is highly visible to even the most senior executives. our passionate leadership and cross-functional collaboration with product managers, electrical engineers, industrial designers, and manufacturing teams is vital to the success of the team and ensuring the safety of the general public for generations to come.

What You'll Do

Location: Scottsdale, AZ 

• Drive innovative product development from conceptualization to manufacturing
• Utilize creative problem solving skills to lead ideation of new product architectural concepts for subsystem and system level designs
• Construct and analyze high fidelity proof-of-concept prototypes
• Perform detailed mechanical analysis to ensure proper function through FEA, tolerance analysis, testing, and other exploratory means
• Collaborate regularly with both domestic and international stakeholders
• Work autonomously and collaboratively in an empowering and fast-paced environment
• Hone your engineering expertise in a dynamic learning environment focused on personal and professional development

What you bring

• Bachelor’s degree in Mechanical Engineering or equivalent experience
• L9: Minimum 12 years of product design experience in high-end consumer electronic products
• Experience providing technical leadership for teams of 2-5 mechanical engineers
• Proficiency with Creo or similar 3D CAD software
• Knowledge in the design of plastic injection molded, stamped metal, die-cast, and machined parts
• Familiarity with adhesives and bonded joint design
• Experience designing for a high level of dust/water ingress protection
• Experience designing thermal management solutions for dissipating heat from electronics
• Experience with PCB/PCBA flex circuit and other electro-mechanical integration
• Strong DFM/DFA skills, with emphasis on part/assembly tolerance management, to ensure robust designs for high volume manufacturing
• Experience collaborating with external consultants, vendors and manufacturers, including willingness to travel internationally
• Ability to interpret product requirements and translate into quantifiable engineering deliverables
• Experience preserving Industrial Design and UX intent in mechanical design implementation
• Effective communication and strong presentation skills
• Ability to balance and prioritize conflicting design constraints through analysis, testing, and creativity
• Collaboration with peers in a candid cross-functional team culture

Benefits that Benefit You

• Competitive salary, bonus, RSUs, and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• And yes, we have snacks in our offices

Benefits listed herein may vary depending on the nature of your employment and the location where you work

Job's mission

What you will be working on

What we are looking for

What sets you apart

Benefits:

• Health insurance (medical, dental, vision)
• 401(k)Retirement plan
• Paid time off (vacation, sick, flex, and holiday) & Parental Leave Benefit
• Life and disability insurance
• Employee assistance program (EAP), Family support, and parental consulting groups
• Healthcare Concierge
• Health Savings and Flexible Spending Accounts
• Lifestyle Spending Account / Fitness Reimbursement
• Fertility & Family Support Programs
• Wellness Program with medical premium discounts

As a Senior Software Engineer at ASM, you’ll sit at the intersection of cutting-edge software, complex hardware, and real-world customer impact. You’ll be a technical leader who solves the toughest software challenges in semiconductor manufacturing—driving system reliability, safety, and performance for our global customers. In this role, you won’t just fix issues—you’ll lead investigations, influence architecture, and deliver long-term, systemic improvements that power advanced semiconductor technology worldwide.

What You’ll Be Working On

• Lead deep technical investigations into software-related safety interlocks, validating corrective and preventive actions.
• Analyze and optimize multiple interacting subsystems, gaining end-to-end understanding of full platform workflows.
• Drive root cause and corrective action (RCCA) using packet captures, log correlation, and system-level analysis.
• Design and evaluate subsystem architectures, including multi-threading and scheduler interactions.
• Develop, test, deploy, maintain, and continuously improve software for advanced semiconductor manufacturing equipment.
• Troubleshoot complex software issues, including real-time control systems.
• Act as a technical escalation point—supporting field engineers and customers globally.
  Partner with QA and Support to reproduce field issues and strengthen regression coverage.
• Author and review system specifications, software designs, and test plans.
• Investigate internal and external technical inquiries, delivering clear analysis and actionable solutions.
• Evaluate and influence software engineering tools and system design decisions.
• Plan and coordinate rapid software fixes and deployments in high-impact environments.
• Present technical insights, progress, and outcomes in customer QBRs, including findings from complex DOE analyses.

What We’re Looking For

• Bachelor’s degree in Computer Science (or related field) with 7+ years of industry experience, or Master’s degree with 4+ years, or PhD with 3+ years of relevant experience
• Strong software development expertise in C++ and/or C#
• Solid understanding of multi-threaded applications
• Experience working with software documentation, specifications, and APIs
• Good knowledge of software memory architecture and debugging

What Sets You Apart

• Advanced degree (Master’s or PhD) and experience in software architecture and machine control systems, ideally within semiconductor equipment
• Hands-on experience with GUIs, device drivers, and interrupt-driven software
• Knowledge of data communications, networking, and EtherCAT
• Understanding of dynamic scheduling algorithms and deadlock avoidance
• Proficiency with development tools such as debuggers, application builders, and configuration management systems
• Ability to triage and diagnose mechanical, electrical, and software issues holistically
• Strong analytical skills, including designing and interpreting complex DOEs using multivariate methods or PCA

As a Principal Engineer, Global Product Management at ASM, you’ll have the opportunities to get involved in a wider scope of work compared to our larger competitors. While the workload is challenging, you are given the independence and autonomy to perform at your peak. This work requires being innovative, so you must have the ability to collaborate with others to deliver creative solutions, work well under pressure and pay great attention to small details.

This position is responsible for product management & technical marketing activities within the Product Management group. Every day is different, working with different customers and different products. This role is for someone who enjoys and is intellectually curious about the whole process and being part of it. You get to work external global customers that have many different needs and you will be part of the solution.  

Key Responsibilities:

• Product Life Cycle – Drive the product life cycle from concept to high volume manufacturing to obsolescence
• Roadmaps – Maintain product roadmap for a portfolio of products, periodically update roadmap through discussions with customers and internal experts, align product priorities and resources to roadmap
• Customer Engagement – Support Technical Meeting with customers, create and manage customer presentations, detailed market and competitive analysis
• MRS – Own the market requirement spec documents and ensure product development priorities align with MRS and customer needs
• Strategic Marketing – Prepare market strategies for executive R&D expenditure requests, develop roadmap and product strategy presentations for executives within ASM
• Financial – Work with finance department on NPV and IRR for products, maintain cost of ownership models
• Business Planning and Market Analysis – Attend company operation/planning meeting, create Business plan/Operation review materials, create business forecast based on market information, support budget planning, competitive analysis
• Drive teams internally to meet set products profit gross margins
• New Product Introductions – Detailed market analysis for inflections, development of business plans, internal executive alignment, positioning of products
• Support technical activities – Work with product development teams on specifications and data collection requirements, manage customer demo requests, prioritization of product development activities
• Supplier Engagement – Develop key capabilities for new products through collaboration with suppliers
• Product Promotion – Create promotional materials for conferences and launches, Sales and product support training, Introductions to Customer

Requirements:

• 10+ years of semiconductor / capital equipment industry experience, of which a significant portion has been in technical marketing and / or product management roles
• Masters or PhD in Material Science, Electrical/Chemical/Mechanical Engineering or equivalent
• Process, hardware, or device experience in semiconductors or capital equipment
• ALD or CVD experience is a plus
• High level of proficiency or deep understanding of capital equipment systems in semiconductor or similar industry
• Direct customer engagement or supplier management
• Ability to work with multiple internal disciplines on portfolio of products
• Understanding of product life cycle and technical marketing
• Ability to travel globally

What The Role Is

The Operations Specialist II will play a key role in assisting the Operations Manager and Operations Engineer by assuring the highest level of safety, reliability and environmental standards while optimizing asset production and profitability. The Operations Specialist II will be responsible for supporting all day-to-day real-time Reporting, Performance, and Monitoring Center (RPMC) activities acting as the on-shift Operations Specialist for all assets under the CEG 12 GW portfolio including Wind, Solar and Battery Storage. This position requires working 12.5 hour rotating shifts, including nights, weekends, and holidays, to ensure continuous operations and monitoring of the CEG utility fleet.

This position is a full-time, on-site position in our operations center based in Scottsdale, Arizona.

If you don’t meet 100% of the below qualifications but see yourself contributing, please submit your resume.

What You'll Be Doing

• Proactively monitor and evaluate real-time activities, performance, and operational status of Clearway Energy Utility Operating Assets to determine root cause and maintain utmost data integrity for operational events
• Operator will also be expected to understand and proactively identify abnormal operating and alarm conditions that arise during the shift and react accordingly
• Ability to manage power plant operations considering different requirements for each plant based on location, generation type, interconnect requirements, regional regulations and customer contractual requirements in a high stress and time sensitive environment.
• Answer phones and emails during shift
• Coordinate, document, and implement all necessary remedial actions to maximize the availability of the equipment and production/revenue according to pricing, resources, forecasts, and maintenance procedures.
• Interpret and execute activities associated with asset contracts (PPA’s, LGIA’s, O&M agreements) including capacity scheduling/reporting, telemetry issues, or remote-control capability impacts
• Operate multiple power plants IAW regulatory operating requirements (i.e.  CPUC/WECC/Prudent Utility Practices)
• Coordinate with the Field Operations teams, including Site Managers, Supervisors, and technicians in daily activities for plant status verifications, downtime reporting, and safe actions of remote equipment
• Coordinate with external entities such as Scheduling Coordinators, Transmission Operators, and Reliability Entities for the performance of status notifications or Operating Instructions
• Support the commissioning of projects by coordinating test energy scheduling and power plant operations activities ensuring safety, regulatory, environmental, and operating compliance Maintain confidentiality and sensitivity with respect to all functions of DEI

What You'll Bring

• Ability to coordinate multiple activities and ensure safety, quality, and schedule adherence.
• Minimum of two (2) years’ experience in operations is required; three to four (3–4) years preferred. Experience in a Solar, Wind, or BESS Field Technician role may be considered toward this requirement.
• Able to demonstrate competent technical knowledge of plant and system processes and experience in operating electrical and SCADA systems.
• Ability to take direction, identify problems, develop solutions, conduct analysis independently and in collaboration with others
• Ability to work in difficult customer situations and show strong verbal and written communication skills.
• Ability to work in a high-stress environment where decisions directly impact personnel safety and equipment reliability
• Ability to work rotating shifts of 12.5 hours, including nights, weekends, and holidays
• Available for 24-hour on-call duty to meet customer requirements
• GED or High School Diploma
• Must possess a current NERC Reliability Coordinator (RC) certification, or have the ability to obtain certification within six (6) months of start date
• If you don’t meet 100% of the above qualifications but see yourself contributing, please submit your resume.

What Would Be Nice

• Bachelor's degree or formal operations apprenticeship training or equivalent preferred.
• Possess knowledge of functional systems interactions
• Attention to critical elements in a complex and regulated environment.

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

What The Role Is

Reporting to the Manager of Project Engineering, the Project Engineer is responsible for managing the review, coordination, and approval of the detailed design package for Clearway Energy Group’s pipeline of solar and energy storage projects throughout the U.S. As part of the Engineering & Strategic Procurement department, the Project Engineer will also work with internal and external personnel to provide optimized designs, participate in the negotiation and execution of key contract exhibits, and support construction and commissioning activities by reviewing and approving commissioning test reports. The Project Engineer will work closely with Clearway Energy’s internal departments, including Origination, Development, Development Engineering, Construction, Procurement, Project Finance, and O&M; as well as with EPC contractors, Independent Engineers, financing parties, and other consultants, contractors, and stakeholders as needed.

This is a hybrid role based in one of our office locations in San Francisco, San Diego, Scottsdale, Houston, or Denver.

If you don’t meet 100% of the qualifications but see yourself contributing, please submit your resume.

What You'll Be Doing

• Technical lead and primary design and engineering point of contact for the Development and Construction teams, supporting intermediate- to advanced-stage development of utility-scale PV, PV+Storage, and stand-alone energy storage projects.
• Manage all resources, internally or externally, as necessary to obtain or review final site due diligence required to finalize scope, project costs, schedule, energy output, and risks with an independent EPC contractor or developer.
• Review engineering deliverables to ensure the final design meets contractual, cost, and performance requirements for our customers and financing partners.
• Develop, refine, or evaluate energy input assessments and power output expectations. Perform or oversee analyses to optimize site layouts, engineering design, and equipment selection to maximize performance and minimize lifecycle costs.
• Direct activities of designers, consultants, and contractors, and manage meetings and conference calls to achieve efficient use of resources, meet deadlines for deliverables, minimize delays, avoid crises, and resolve conflicts.
• Write, edit, and/or review technical scope of work documents, specifications, procedures, site reports, progress reports, feasibility studies, proposals, presentations, etc. Review and negotiate technical aspects of EPC contracts, interconnect agreements, etc.
• Coordinate with the Development team and external consultants to deliver energy resource predictions and production simulations, shading studies, electrical schematics, plant plans and equipment layouts, system cost estimates, EPC contracts, technical exhibits, etc.
• Review, manage, and maintain contractor deliverables during construction to meet critical contractual and financing milestones, including site, civil, structural, and electrical plans, permitting, and construction documents.
• Support construction as a technical escalation point and owner’s representative to mitigate delays and scope creep to maintain schedules and budgets.
• Represent Clearway (CEG) in interviews, meetings, and negotiations with clients, project developers, suppliers, consultants, utilities, and regulatory authorities.

What You'll Bring

• B.S. degree in mechanical, electrical, or civil engineering, or related subject.
• M.S. degree and/or P.E. desirable.
• Minimum 2+ years of solar/BESS industry experience, including 1+ year of direct EPC experience completing the detailed design, permitting, and construction of solar projects, and 1+ year of storage experience.
• Understanding solar and storage project design, optimization trade-offs, and familiarity with the current solar and storage market, equipment suppliers, contractors, typical technical specifications, and costs.
• Experience with solar and storage project financing and independent engineer requirements.
• Understanding of solar and storage energy estimates, losses, assumptions, and standards.
• Experience with review and negotiation of engineering, procurement, and construction contracts and technical exhibits for solar and storage facilities.
• Experience managing consultants and contractors.
• Working knowledge of relevant U.S. and IEC equipment standards, codes, and construction practices.
• Detail-oriented and self-motivated with the ability to perform in a dynamic and collaborative working environment.
• Ability and willingness to travel (~20%) and occasionally to work after hours on short notice, when necessary.
• Proven ability to organize and prioritize work, manage relationships with clients, colleagues, consultants, and contractors.
• Excellent written and verbal communication, mathematical abilities, analytical and creative design skills, and problem-solving skills; team-oriented with the ability to work alone when needed.

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Hybrid

Job Summary: 

The Inspection Technology Engineer I supports the implementation, validation, and continuous improvement of automated inspection systems used in cylindrical lithium-ion battery cell manufacturing. This role focuses on ensuring inspection systems operate reliably, detect defects accurately, and support safe, high-volume production for EV battery applications.

The role is hands-on and highly collaborative, working closely with Production, Quality Assurance, Equipment Engineering, and EHS teams in a fast-paced environment. The engineer will gain exposure to vision systems, X-ray inspection, metrology, and automated electrical test systems across electrode, assembly, and formation processes.

Responsibilities:

Support inspection, manufacturing, or automation processes on the production floor.

Assist with setup, validation, and optimization of inspection and production equipment.

Analyze basic process and inspection data to support yield and quality improvements.

Support troubleshooting of equipment and process-related issues under guidance.

Participate in new model introductions and process change activities.

Follow SOPs, work instructions, and engineering standards.

Collaborate with technicians, engineers, and cross-functional teams.

Support documentation, reporting, and continuous improvement activities.

Qualifications:

Bachelor’s degree in Engineering (Mechanical, Electrical, Industrial, Manufacturing, or related field).

1+ years of experience in a manufacturing or industrial environment (internship or co-op acceptable).

Basic understanding of manufacturing processes and quality concepts.

Fundamental understanding of automated equipment or inspection systems.

Knowledge of machine vision algorithm libraries (Halcon, OpenCV) and deep learning models.

Exposure to maintenance of in-line inspection systems (Machine Vision, 3D metrology, X-ray and CT).

Understanding of measurement system analysis (MSA) and gage R&R using Minitab.

Skills:

Basic data analysis skills.

Problem-solving mindset with willingness to learn.

Strong communication and teamwork skills.

Ability to follow procedures and engineering standards.

Basic technical documentation skills.

Title: Engineer I, Facility

Location : Queen Creek, AZ

Summary:

The Facility Engineer I will be responsible for overseeing the efficient operation and maintenance of all utility systems and general facility equipment within the battery manufacturing plant. This includes managing critical systems such as electricity, compressed air, water, steam, and HVAC (Heating, Ventilation, Air Conditioning). The role involves ensuring the reliability of utility services and general facilities in support of production processes and handling associated maintenance activities. Additionally, the engineer will improve utility efficiency, manage external contractors, and ensure compliance with safety and regulatory standards.

Responsibilities:

• Oversee the operation, maintenance, and repair of all utility systems, including electrical, compressed air, water, steam, and HVAC systems, ensuring they operate efficiently and without any interruptions
• Monitor utility consumption, identify energy-saving opportunities, and manage utility budgets to reduce costs while maintaining optimal performance of facilities
• Lead troubleshooting and resolution of utility issues and general facility maintenance items. Perform root cause analysis and implement corrective actions to prevent recurrence
• Provide technical information regarding production or processing techniques, materials, properties, and process advantages and limitations that affect long-term planning
• Select and coordinate with external contractors and vendors for utility-related services; including maintenance, repairs and system upgrades
• Negotiate contracts and manage service agreements
• Ensure minimal production interruptions by ensuring safe and timely resolution to planned and unplanned outages 
• Maintain accurate records of utility systems' performances, maintenance schedules, work orders and compliance documentations
• Regularly report on utility performance to senior management
• Maintain cleanliness at work-site in accordance with 5S3R Standards
  • Sort, Set in order, Shine, Standardize, Sustain
  • Right Location, Right Quantity, Right Container
• Ensure work is completed in a safe manner and maintain a safe work environment
• Perform other duties as assigned

Qualifications and Requirements: 

• Minimum of 1 year of facilities experience in production/plant environment
• Bachelor’s or higher degree in engineering or related field required
• Programmable Logic Controller (PLC) experience * Preferred but not required
• Six Sigma certification * Preferred but not required
• Experience with DOE (Design of experiments) * Preferred but not required
• Experience using CAD (Computer-aided design) and coding * Preferred but not required
• Must be able to properly and regularly utilize the following Personal Protective Equipment (PPE) for a period of up to 12 hours
  • Safety glasses
  • Steel-toed shoes
  • Must be able to do perform the following over the course of up to 12 hours per day Lift/push/pull up to 50 pounds on occasion
  • Stoop, twist, bend
  • Reach overhead
  • Stand for lengthy periods

Skills:

• Microsoft Office Suite
• Strong verbal and written communication skills

Job Summary: 
At LG Energy Solution Arizona, Inc., the Engineer II – Cell Quality Assurance will play a key role in improving manufacturing methods and procedures within the battery electrode production process to ensure products meet company quality specifications. Working closely with production, engineering, and quality teams, this role evaluates manufacturing processes, analyzes quality data, and implements improvements to strengthen product reliability and process consistency. The Engineer II applies quality tools such as PPAP, PFMEA, SPC, Gage R&R, calibration systems, and corrective and preventive actions to address production issues and support continuous quality improvement. Through cross-functional collaboration and data-driven analysis, this role helps ensure battery cell components meet established standards for quality, reliability, and performance.

Report To: 
Sr. Manager, Cell Quality Assurance 

Responsibilities:
• Develop and document inspection Standard Operating Procedures (SOPs) to ensure inspection reliability and verify applicability within inspection and testing processes.
• Analyze production process conditions and manufacturing data to identify root causes of electrode nonconformance, including field quality issues, and implement corrective actions in collaboration with cross-functional teams.
• Conduct analysis of nonconforming electrode samples, document investigation results, report findings to headquarters, and implement corrective actions to prevent recurrence.
• Utilize analytical and statistical methods, including Statistical Process Control (SPC), to monitor electrode manufacturing quality, identify potential risk factors, and implement preventive quality measures.
• Perform surveillance audits of electrode production processes to verify compliance with quality standards, procedures, and operational requirements.
• Review and approve PPAP documentation and 4M process changes related to electrode manufacturing to ensure quality requirements are maintained.
• Perform cell validation testing, including performance, safety, and reliability evaluations, to confirm product quality and manufacturing process stability.
• Maintain worksite organization and cleanliness in accordance with 5S3R standards (Sort, Set in Order, Shine, Standardize, Sustain; Right Location, Right Quantity, Right Container) to support safe and efficient electrode inspection and testing operations.

Qualifications:
• Bachelor’s degree in Engineering required (Chemical, Electrical, Mechanical, Industrial, or Manufacturing Engineering preferred).
• 3+ years of experience in Quality Engineering or Manufacturing Engineering within an automotive or high-volume manufacturing environment, including internship or co-op experience.
• Experience supporting high-volume production environments, including development and implementation of Control Plans, PFMEA, and process controls.
• Knowledge of quality methodologies and problem-solving tools, including Minitab, Six Sigma, and 8D problem-solving methods.
• Experience using Microsoft Office and Minitab for data analysis and reporting.
• Knowledge of electrochemistry and lithium-ion battery cell materials (e.g., cathode, anode, separator) preferred.
• Experience performing cell validation testing, including performance, safety, and reliability testing.

Skills:
• Knowledge of APQP, inspection equipment and techniques, and root cause failure analysis methodologies.
• Familiarity with capability studies, statistical analysis, and manufacturing process evaluation.
• Understanding of PFMEA, Control Plans, PPAP, 8D/5-Why problem solving, and fault tree analysis (FTA).
• Knowledge of SOPs, Control Plans, CTQs, and parameters used for conducting process audits.
• Strong data analysis and reporting capabilities, including the ability to prepare technical reports and summarize quality findings.
• Excellent written and verbal communication skills with the ability to collaborate across production, engineering, and quality teams.
• Demonstrated teamwork and effectiveness in achieving organizational goals.

Job Summary: 

At LG Energy Solution Arizona Inc., the Engineer II, Environmental & Sustainability will play a key role in supporting environmental and sustainability initiatives by identifying, evaluating, and controlling workplace and environmental risks. This role ensures compliance with local, state, and federal regulations, while supporting the implementation of company EHS standards and programs. Acting as a technical resource to cross-functional teams, the engineer conducts audits, inspections, and incident investigations, and supports the development of sustainable practices to improve environmental performance and maintain regulatory compliance.

Responsibilities:

• Perform company permit application and renewal activities, including but not limited to air, waste, stormwater, and wastewater permits, as well as required environmental reporting.
• Manage and drive continuous improvement of environmental programs, including wastewater, hazardous waste, air emissions, and stormwater compliance.
• Support and drive the ISO 14001 certification process, identifying areas for continuous improvement across environmental programs to maintain ISO 14001 standards.
• Collaborate with internal teams and external consultants to ensure permit applications and submissions are accurate and completed on time.
• Deploy and manage environmental initiatives to continuously improve the performance of environmental programs and processes.
• Ensure all permits and reports comply with company standards and applicable federal, state, and local environmental regulations.
• Serve as a point of contact and correspond with federal, state, and local regulatory agencies as required.
• Provide environmental review and support for site projects, including participation in management of change (MOC) processes.
• Lead and participate in routine audits to support continuous improvement.
• Maintain workplace cleanliness in accordance with 5S3R standards (5S: Sort, Set in Order, Shine, Standardize, Sustain; 3R: Right Location, Right Quantity, Right Container).
• Perform other duties as assigned.

Qualifications:

• Bachelor’s degree in Engineering, Environmental Science, or a related field.
• 3+ years of experience in environmental reporting, regulatory compliance, or a related function within a manufacturing environment.
• Experience with environmental permits and reporting, including air, wastewater, stormwater, and hazardous waste.
• Knowledge of local, state, and federal environmental regulations and compliance requirements.
• Experience supporting or participating in ISO 14001 environmental management systems.
• Ability to work effectively in a cross-functional, team-oriented environment.

Skills:

• Proficiency in Microsoft Office Suite (Excel, Word, Outlook).
• Strong analytical and problem-solving skills.
• Ability to work independently with minimal supervision and manage multiple priorities.
• Strong written and verbal communication skills, including interaction with internal teams and regulatory agencies.
• Ability to prioritize tasks and meet deadlines in a fast-paced environment.
• Knowledge of advanced manufacturing processes and technologies, including automation, chemicals, and electrical systems.

Title: Engineer II, Facility

Location : Queen Creek, AZ

Summary:

The Facility Engineer II will be responsible for overseeing the efficient operation and maintenance of all utility systems and general facility equipment within the battery manufacturing plant. This includes managing critical systems such as electricity, compressed air, water, steam, and HVAC (Heating, Ventilation, Air Conditioning). The role involves ensuring the reliability of utility services and general facilities in support of production processes and handling associated maintenance activities. Additionally, the engineer will improve utility efficiency, manage external contractors, and ensure compliance with safety and regulatory standards.

Responsibilities:

• Oversee the operation, maintenance, and repair of all utility systems, including electrical, compressed air, water, steam, and HVAC systems, ensuring they operate efficiently and without any interruptions
• Monitor utility consumption, identify energy-saving opportunities, and manage utility budgets to reduce costs while maintaining optimal performance of facilities
• Lead troubleshooting and resolution of utility issues and general facility maintenance items. Perform root cause analysis and implement corrective actions to prevent recurrence
• Provide technical information regarding production or processing techniques, materials, properties, and process advantages and limitations that affect long-term planning
• Select and coordinate with external contractors and vendors for utility-related services; including maintenance, repairs and system upgrades
• Negotiate contracts and manage service agreements
• Ensure minimal production interruptions by ensuring safe and timely resolution to planned and unplanned outages 
• Maintain accurate records of utility systems' performances, maintenance schedules, work orders and compliance documentations
• Regularly report on utility performance to senior management
• Maintain cleanliness at work-site in accordance with 5S3R Standards
  • Sort, Set in order, Shine, Standardize, Sustain
  • Right Location, Right Quantity, Right Container
• Ensure work is completed in a safe manner and maintain a safe work environment
• Perform other duties as assigned

Qualifications and Requirements: 

• Minimum of 3 years of facilities experience in production/plant environment
• Bachelor’s or higher degree in engineering or related field required
• Programmable Logic Controller (PLC) experience * Preferred but not required
• Six Sigma certification * Preferred but not required
• Experience with DOE (Design of experiments) * Preferred but not required
• Experience using CAD (Computer-aided design) and coding * Preferred but not required
• Must be able to properly and regularly utilize the following Personal Protective Equipment (PPE) for a period of up to 12 hours
  • Safety glasses
  • Steel-toed shoes
  • Must be able to do perform the following over the course of up to 12 hours per day Lift/push/pull up to 50 pounds on occasion
  • Stoop, twist, bend
  • Reach overhead
  • Stand for lengthy periods

Skills:

• Microsoft Office Suite
• Strong verbal and written communication skills

Job Summary: 

At LG Energy Solution Arizona, Inc., the Senior Engineer, Process Safety Lead will play a critical role in developing and managing process safety programs essential to lithium-ion battery manufacturing operations. This role oversees Process Safety Management (PSM), permitting systems, high-risk equipment safety, and safety planning for production and facility expansion projects. The position ensures regulatory compliance, mitigates high-hazard risks such as thermal runaway, chemical exposure, and equipment failures, and supports safe, reliable, and efficient plant operations.

Responsibilities:

• Lead the implementation, ongoing management, and continuous improvement of Process Safety Management (PSM) programs applicable to battery manufacturing processes.
• Maintain safety documentation, SOPs, and engineering controls relevant to battery production hazards.
• Oversee safety programs for high-risk equipment and develop inspection, testing, and preventive maintenance standards in partnership with engineering and maintenance teams.
• Lead annual and long-term EHS planning, including risk management programs, incident response strategies, and departmental improvement projects.
• Facilitate Process Hazard Analysis (PHA), Layer of Protection Analysis (LOPA), and Dust Hazard Analysis (DHA) for cyclical reviews and capital projects.
• Provide technical guidance and subject matter expertise to support effective implementation of process safety standards.
• Manage safety data, metrics, and dashboards; track KPIs and generate regular compliance and performance reports.
• Develop and deliver training programs on PSM, contractor safety, permits, equipment safety, and emergency procedures.
• Assist in emergency response planning and conduct tabletop or field drills with relevant teams.
• Support internal and external regulatory audits and ensure timely closure of findings.
• Drive continuous improvement initiatives to strengthen operational safety culture across the plant.
• Maintain cleanliness at the worksite in accordance with 5S3R Standards: Sort, Set in Order, Shine, Standardize, Sustain; Right Location, Right Quantity, Right Container.
• Follow LGESMI existing cleaning SOPs during downtime (e.g., line stop, waiting time, etc.), including cleaning of designated equipment and surrounding work areas.
• Perform other duties as assigned.

Qualifications:

• Bachelor’s degree in Engineering, Environmental Health & Safety, or a related field.
• 7+ years of EHS or process safety experience in battery manufacturing, chemical processing, or another high-hazard manufacturing environment.
• Strong knowledge of lithium-ion battery manufacturing hazards, including NMP, thermal runaway risks, and electrolyte handling and storage.
• Deep understanding of OSHA PSM, EPA RMP, NFPA, and chemical safety regulations applicable to battery production.
• Experience with risk assessment methodologies such as HAZOP, LOPA, and other process and dust hazard analyses.
• Ability to interpret engineering drawings, P&IDs, ventilation diagrams, and safety interlock systems.
• Strong leadership and communication skills for effective cross-functional coordination.

Skills:

Your Impact

As a Senior member of the TASER Electrical Engineering team, you will drive and engage in innovative hands-on design, development, and testing of cutting-edge electronics that are integral to Axon TASER Products. You will apply strong technical expertise and sound engineering judgment to deliver robust, high-quality designs that meet rigorous product and regulatory requirements. In this role, you will own substantial portions of circuit and subsystem designs, support system-level architecture decisions, and collaborate with cross-functional partners across product engineering, firmware, new product introduction, manufacturing, and quality teams. You will also mentor junior engineers and contribute to raising the technical bar within the team while continuing to grow your own technical leadership capabilities. Join a passionate engineering team dedicated to overcoming complex challenges, and help deliver technologies that positively impact Law Enforcement, Public Safety, and their surrounding communities.

Your Day-to-Day

• Research, propose, and develop innovative, industry-leading circuit designs for products such as TASER energy weapons, TASER-enabled devices, wirelessly connected TASER products, and related accessories
• Design, develop, and verify system circuitry and hardware aligned with project objectives and requirements
• Using OrCAD Schematic tools, design embedded Mixed-Signal electronic circuitry that integrates high voltage power supply circuitry, microcontrollers, flashlight/indication/display circuitry and drivers, memory devices (FLASH/EEPROM), switch-mode and linear power supplies, batteries, data interfaces (UART, SPI, I2C, USB), RF transceivers, electromechanical transducers, and other discrete digital and analog components
• Collaborate with PCB designers to guide layout implementation and review designs for signal integrity, power integrity, manufacturability, and reliability using Cadence layout tools
• Collaborate with cross-functional engineering teams, technology partners, and manufacturing teams to oversee electronics development throughout the entire product lifecycle, from concept to mass production
• Lead schematic and layout design inspections to improve the quality of design releases and product reliability
• Develop test methods and create test plans to evaluate and validate designs effectively
• Bring up, characterize, and debug systems and circuits using lab tools such as oscilloscopes, multimeters, logic analyzers, power supplies, hi-pot testers, etc.
• Evaluate and document design outcomes, test results, and related information, then present findings to the design teams for review and further action
• Support regulatory compliance efforts (FCC, CE, IEC, etc.) through design best practices and debug activities
• Optimize performance of electronics design using simulation tools and hands-on measurements
• Develop, evaluate, and help finalize assembly drawings, bill of materials, Geber files, and other design documentation needed for product release
• Partner with new product introduction team to develop and define test requirements documentation for PCBA board level testers and system functional test fixtures on the production line
• Mentor junior engineers and contribute to team knowledge sharing

Basic Qualifications

• Bachelor’s degree in Electrical Engineering or similar engineering discipline
• 6+ years of industry leading electronics design experience with emphasis on designing densely populated, tightly packaged, power control and delivery systems in embedded electronics
• Highly proficient in engineering processes and expectations across all design phases, with the ability to lead hardware design and development from concept through to mass production release
• Experienced system-level design engineer skilled in creating designs that meet product requirements. Proficient in collaborating with product and engineering teams to navigate design trade-offs and selections, ensuring a meticulous approach to minimize errors and deliver successful results
• Proficient in power supply design and selection based on product needs and trade-offs. Experienced in designing with switch-mode power supplies (buck, boost, buck/boost, and flyback), including circuit operation and component selection for custom applications. Strong background in high-voltage power supply design, with expertise in developing, testing, and characterizing custom magnetics considered a significant plus
• Demonstrated expertise and ownership of electronics architecture/design/integration and verification testing in several of the following areas: embedded microcontrollers, power supply design (switch-mode and linear regulators), power delivery networks, motor controllers, memory subsystems (FLASH/EEPROM), high speed and low speed communication interfaces (USB, UART, SPI, I2C), high power interfaces, battery specific applications, battery chargers, high power LED and driver design, and RF subsystem integration
• Experience designing products for electromagnetic compatibility and protecting circuitry against electromagnetic interference and electrostatic discharge events. Familiar with typical EMI/ESD filtering and protection techniques, as well as snubber circuitry design.
• Collaborates effectively with firmware engineering to develop and debug embedded electronic systems
• Strong hands-on proficiency with electronics bring-up, characterization, and debug using laboratory tools: Oscilloscope, power supplies, multimeters, custom jigs, etc.
• Proficient schematic design skills using industry leading design tools, including BOM development. Experience with Cadence/OrCAD desired. Experience developing rigid, flex, and rigid-flex PCB designs.
• Skilled in leading and collaborating with PCB and mechanical design engineers to develop PCB layouts that align with design requirements.
• Experience supporting products through regulatory compliance testing
• Independent contributor capable of developing products within cross-functional and geographically diverse engineering teams
• Strong proficiency in documentation, analysis, and presentation tools, including Word, Excel, and PowerPoint

Preferred Qualifications

• Experience designing tightly packaged, hand-held embedded systems powered by rechargeable batteries, including development with embedded microcontrollers and integration of electromechanical components such as solenoids

Benefits that Benefit You

• Competitive salary and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• And yes, we have snacks in our offices

Your Impact

As an RF Test Engineer, your work will be essential in ensuring that the wireless technologies in Axon's advanced products meet the highest performance, reliability, and compliance standards. Your hands-on expertise will drive the rigorous testing and optimization of RF systems that enable our cutting-edge body-worn cameras, vehicular systems, and connected devices. By leveraging your technical acumen and problem-solving skills, you will be instrumental in identifying and overcoming RF challenges, ensuring robust designs that operate seamlessly in diverse and demanding environments.

You will collaborate with cross-functional teams and global partners to verify and refine wireless designs, using state-of-the-art tools and methodologies. Your work will directly contribute to the development of reliable, high-performance solutions that serve Law Enforcement, Public Safety, and the communities they protect. Through your efforts, you will help deliver transformative technologies that empower public safety professionals and redefine industry standards.

What You’ll Do

• Design and implement test plans to evaluate the performance of wirelessly connected devices, ensuring they meet stringent product and regulatory requirements.
• Record RF test data and organize results, creating clear, actionable reports.
• Present findings and recommendations to cross-functional teams, enabling swift resolution of design challenges.
• Evaluate RF performance characteristics such as Total Radiated Power (TRP), Total Isotropic Sensitivity (TIS), and other over-the-air (OTA) metrics for cellular-enabled wireless devices using advanced equipment. (CMX500 and CMW500 in controlled chamber environments).
• Use instruments like spectrum analyzers and radio communication testers to assess conducted performance of wireless technologies, including LTE, 5G, Wi-Fi, Bluetooth, and GNSS.
• Support product field evaluations to validate RF performance under diverse real-world conditions, such as urban or rural environments
• As part of a collaborative team, investigate and debug issues such as poor sensitivity, low transmit power, or signal interference in wireless devices.
• Assist in the regulatory pre-certification and formal certification test efforts for hardware by preparing test samples, working closely with external test labs, troubleshooting issues, and ensuring successful completion of certification activities.
• Expand your knowledge of RF systems, testing methodologies, and certification standards while working closely with experienced engineers to develop your technical expertise and contribute to innovative designs.

What Your Bring

• Bachelor’s degree in Electrical Engineering, RF Engineering or similar discipline.
• Minimum of 3 years of hands-on embedded RF and wireless device testing experience
• Minimum of 3 years of wireless device test plan development for evaluating performance of various wireless interfaces against system and product requirements
• Solid understanding of basic RF principles and theory, familiar with basic RF technology circuitry stages and topologies.
• Experience characterizing RF components such as filters, switches, passives and signal paths.
• Experience testing modern RF hardware including multiband Wi-Fi, Bluetooth, Cellular (LTE, 5G FR1), and multi-constellation GNSS at the circuit, subsystem and device levels. Cellular experience is a must-have.
• High level of familiarity of cellular certification processes, test requirements, and test methods (PTCRB, CTIA, GCF, Carrier testing, etc), with hands on experience with device pretesting
• Familiarity of worldwide EMC and intentional radiator regulatory standards and test methods (FCC, CE, ETSI, etc). Hands on experience a plus.
• Proficient with hands-on operation of RF equipment such as RF communication testers (CMW, CMX, Litepoint), Network Analyzers, Spectrum Analyzers, RF power meters, Signal Generators, RF Test chambers
• Experience with collaborative RF debug at device and circuit level
• Familiarity reading electronics schematics, layout and mechanical drawings.
• Strong documentation and communication capabilities to effectively report test procedures, test results, and recommendations to the design team
• Motivated to operate independently, within cross-functional in-house design teams, and with external resources and test facilities.

Preferred Qualifications

• Familiar with Linux command line
• Experience with CMWrun test scripting tool

Benefits that Benefit You

• Competitive salary and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• And more...

** This position is not eligible for visa sponsorship for external candidates. Candidates cannot require sponsorship now or in the future**

Job’s mission

Our Global Sales, Services & Spares IQ and Sustaining teams are seeking Snr Engineers I & II, Field Service (level will depend on experience, degree and responsibilities. Please review below) to join ASM at a customer site (Intel) in Chandler, AZ. Domestic and International travel of at least 25% will be required for this role. As a Senior Field Service Engineer at ASM, you’ll play a critical role in supporting the advanced semiconductor equipment that powers the world’s most transformative technologies. You’ll take the lead on complex troubleshooting, guide and mentor engineers, and strengthen our partnerships by helping customers achieve stable, high‑performance fabrication environments. Your expertise will make a direct impact on tool reliability, customer satisfaction, and the next generation of ASM technology.

Shifts available:

• Shift 4 (6pm-6am)- Sun-Tu and every other Saturday
• Shift 5 (6am-6pm)- Sun- Tue and every other Wednesday 
• Shift 6 (6pm- 6am)- Wed-Fri and every other Saturday
• Shift 7 (6am- 6pm)- Wed-Sat and every other Wednesday

What you will be working on

Senior Engineer I, Field Service

• Install, maintain, and repair ASM semiconductor equipment with minimal supervision
  • Lead troubleshooting of complex tool or process issues using structured diagnostic methods
  • Perform root‑cause analysis and recommend targeted, data‑driven corrective actions
  • Review tool‑performance data to identify trends, risks, or improvement opportunities
  • Provide technical guidance and on‑the‑job coaching to less‑experienced engineers
  • Document service activities and support updates to procedures and best practices
  • Communicate solutions, progress, and expectations clearly with customer engineers
  • Participate in escalations alongside cross‑functional ASM engineering teams

Senior Engineer II, Field Service

• Serve as the senior technical lead for equipment installation, performance optimization, and recovery
• Diagnose and resolve highly complex, multi‑factor tool and process issues with limited guidance
• Lead advanced root‑cause analysis and drive long‑term corrective‑action plans that influence global engineering improvements
•  Own the customer‑technical relationship: build trust, anticipate operational needs, and act as ASM’s senior technical representative onsite
• Manage escalations end‑to‑end, aligning expectations, coordinating cross‑functional teams, and communicating clear action plans
• Guide, mentor, and develop engineers through hands‑on instruction, structured training, and knowledge‑sharing
• Champion best practices and contribute to procedure development, improvements, and field‑wide learning
•  Provide detailed field insights to R&D, product, and design teams, including support for beta tools or early‑option deployments

What we are looking for

Senior Engineer I, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 6+ years of experience, OR a Master’s degree with 4+ years of experience OR PhD degree with 0+ years of experience.
• Experience of semiconductor field service or capital‑equipment experience
• Ability to interpret electronic and electromechanical schematics
•  Experience with structured troubleshooting methodologies
• Knowledge of cleanroom and semiconductor safety protocols
• Strong written and verbal communication skills
• Ability to work independently and collaboratively in fast‑paced fab environments
• Willingness to travel domestically and internationally (minimum 25%)
• Proficiency in MS Office

Senior Engineer II, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 8+ years of experience, OR a Master’s degree with 6+ years of experience OR PhD degree with 4+ years of experience.
• Experience in semiconductor field service experience with demonstrated technical leadership
• Advanced knowledge of tool architecture, control algorithms, and multi‑factor troubleshooting
• Experience driving structured root‑cause analysis and long‑term corrective‑action plans
• Proven ability to lead escalations and manage customer‑technical relationships
• Strong communication and mentorship capabilities
• Ability to work autonomously while guiding and developing other engineers
• Willingness to travel domestically and internationally
• Proficiency in MS Office

What sets you apart

Senior Engineer I, Field Service

• Experience supporting beta tools or early‑option equipment
• Knowledge of wafer‑fab operations, robotics, vacuum systems, plasma, RF, or gas handling
• Experience writing or updating procedures or technical documentation
• Strong customer‑service approach and organizational skills
• Familiarity with structured problem‑solving methods

Senior Engineer II, Field Service

• Demonstrated leadership in complex troubleshooting programs or technical initiatives
• Experience owning customer‑technical relationships, including expectations and long‑term partnership building
• Strong capability in mentoring and developing field engineers
• Hands‑on expertise with fab robotics, vacuum systems, plasma, RF, or gas‑delivery systems
• Experience providing structured feedback to engineering or product teams
• Experience evaluating or supporting beta‑stage or early‑option tools

As a Field Service Engineer, you’ll bring the technical discipline, precision, and equipment expertise you developed in the military to support ASM’s advanced semiconductor tools and help our customers keep their fabs running at peak performance. You’ll work with the same mindset you relied on in mission‑critical environments—applying your engineering background and real‑world troubleshooting experience to technologies that power AI, 5G, cloud computing, and next‑generation devices. This is a chance to leverage the skills you gained maintaining complex systems in the field and continue building your technical mastery in a rapidly growing, high‑tech industry. 

In this role, you’ll operate at the center of cutting‑edge semiconductor manufacturing. It’s an ideal opportunity for veterans and transitioning service members who have supported sophisticated mechanical, electrical, or electronic systems and want to apply that expertise in a world‑class technology environment where every day brings new challenges to solve. 

From day one, you’ll receive structured training and hands‑on guidance from experienced engineers onsite. You’ll work with vacuum systems, plasma, chemical delivery, robotics, sensors, advanced metrology, and complex hardware‑software interactions—equipment that will feel familiar if you’ve maintained avionics, electronics, propulsion, navigation, comms, radar, robotics, or similar military systems. Your contributions will directly impact tool performance, system uptime, and customer success, forming a strong foundation for long‑term growth and a variety of career paths within ASM. 

Shifts available:

• Shift 4 (6pm-6am)- Sun-Tu and every other Saturday
• Shift 6 (6pm- 6am)- Wed-Fri and every other Saturday

What you will be working on 

• Install, maintain, troubleshoot, and repair ASM semiconductor equipment at customer sites
• Diagnose mechanical, electrical, and process issues in collaboration with senior engineering staff
• Deliver responsive, customer‑focused service with a strong commitment to safety and operational discipline
• Working in cleanroom environments while following strict safety and quality standards
• Assisting, identifying and contributing to continuous improvement efforts 
• Participate in escalations and cross‑functional problem‑solving
• Work on an assigned shift schedule supporting 24/7 manufacturing operations

What we are looking for 

• Bachelor’s or master’s degree in Mechanical Engineering, Electrical Engineering, Electromechanical Engineering, or related field
• Hands-on technical experience maintaining, repairing, or troubleshooting complex mechanical, electrical, or electronic systems
• Proven ability to diagnose complex system faults, follow technical procedures with precision, and maintain equipment in mission‑critical environments 
• Experience working under strict safety protocols, lock‑out/tag‑out procedures, and high‑reliability operational standards
• Comfort working in shift-based environments where readiness, accountability, and teamwork are essential
• Demonstratedability to stay calm under pressure, adapt quickly to changing conditions, and take ownership of equipment performance in demanding situations 
• Ability to read and interpret electronic and electromechanical schematics
• Strong troubleshooting skills and disciplined adherence to safety
• Ability to work in a cleanroom environment
• Clear and effective written and verbal communication
• Ability to work independently and collaboratively
• Willingness to travel domestically and internationally
•  Proficiency with Microsoft Office 

What sets you apart 

• Experience with equipment, gas handling, or high‑precision machinery
• Experience writing or updating technical documentation
• Background in customer‑facing or technical support roles
• Familiarity with structured problem‑solving, data analysis, or statistical methodologies
• Military experience such as Avionics Technician, Electronics Technician, Nuclear Machinist Mate, Satellite/Communications Systems Technician, or similar specialties

Why join ASM?  

With us, you will have strong long‑term growth potential at the forefront of semiconductor technology. Your first role as an FSE is the foundation - not necessarily the finish line. With clear pathways into technical leadership, operations, product roles, program management, technical sales and process engineering, ASM gives you the flexibility to grow in the direction that fits you best in an industry that makes AI possible.  

2026 is the year to join ASM as a Field Service Engineer. Apply now! 

• Bachelor’s degree in Electromechanical Engineering or related field  
• 1–3 years of technical experience in field service, or manufacturing of OEM capital equipment
• Ability to read and interpret electronic and electromechanical schematics
• Basic knowledge of safety protocols and cleanroom guidelines
• Ability to apply rules and procedures in own activities
• Ability to fully understand tool architecture and control algorithms and explain operating principals to peers
• Clear written and verbal communication skills
• Ability to work independently and in a team
• Willing to travel up to as required for the role domestically and internationally
• Knowledge of safety procedures and cleanroom guidelines
• Proficiency with MS Office

Engineer II, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 4+ years of experience, or a Master’s degree with 0 years of experience
• Experience in field service or semiconductor capital equipment
• Ability to interpret electronic and electromechanical schematics
• Experience with structured troubleshooting methodologies
• Knowledge of cleanroom and semiconductor safety protocols
• Strong communication skills, both written and verbal
• Ability to work independently and within a team
• Willingness to travel domestically and internationally
• Proficiency with MS Office

What sets you apart

Engineer I, Field Service

• Semiconductor field service or capital equipment experience
• Knowledge of wafer fab operations, robotics, vacuum systems, plasma, or gas handling
• Experience writing procedures or process documentation
• Strong customer‑service mindset and organizational skills
• Familiarity with structured problem‑solving methods
• Experience supporting escalations or beta‑site activities

Engineer II, Field Service

• Hands‑on semiconductor field service experience
• Working knowledge of wafer fab operations, robotics, vacuum systems, plasma, RF, or gas handling
• Experience leading structured root‑cause analysis
• Experience providing field data to engineering or design teams
• Background supporting beta‑stage or early‑option tools
• Familiarity with structured problem‑solving techniques
• Strong customer‑service mindset and organizational skills

Your Impact 

This role sits at the intersection of engineering and supply chain, owning component strategy from design through full product lifecycle. You will directly influence product cost, supply resilience, and scalability by driving component selection, supplier strategy, and lifecycle risk management across Axon’s product portfolio. 

What You’ll Do 

Location: Scottsdale, Arizona (HQ) 
Reports to: Director of Category Management  
Direct Reports: none 

• Partner with design engineering teams early in the NPI development process to influence component selection by leveraging your industry experience. 

• Establish strong relationships with manufacturers and their associated representatives in the electronics industry to understand product roadmaps and availability to support current and future product development.  

• Work with the sourcing team to develop and ramp component sources for new products and support the NPI team’s efforts to ensure components are purchased in a timely manner for engineering development builds.  

• Leverage your technical expertise and industry knowledge to select key strategic components to support product scalability for 5+ year lifecycles. 

• Assist the respective Category Managers and cross-functional category teams in developing and executing multidimensional commodity strategies that support the NPI work stream with an emphasis on cost optimization, time to market, technology, quality, supply continuity, supply chain consolidation, service and risk mitigation. 

• Identify and manage the implementation of cost reduction opportunities on new and existing products in collaboration with the category management and continuous engineering teams. 

• Identify risks in our current supply chain and work together with the Category Managers and Continuous Engineering team to qualify additional sources of supply for critical components on our BOM’s. 

• Manage all active BOMs in the electronic component database tool. 

• Own the development and maintenance of the EOL Maintenance Process based on incoming manufacturer Product Change Notices (PCN's). 

• Provide formal reports on obsolescence and environmental solutions for electronic components including DMSMS (Diminishing Manufacturing Sources and Material Shortages) Management, PCN’s, and EOL’s. 

• Provide input to new designs to improve product reliability and longevity. 

• Provide support to the team regarding cost, availability, and technical advantages of various component choices and manufacturer choices. 

• Ensure all existing and new internal part numbers, datasheets and descriptions are correct in our databases. 

• Generate internal standards relating to component selection. 

• Liaise with external agencies regarding reliability and component issues. 

What You Bring 

• BS in Electrical Engineering, or related field. 

• 5+ years of experience in component engineering or related roles. 

• Work experience in a new product introduction (NPI) sourcing environment is preferred. 

• Ability to coordinate cross functionally with groups such as Engineering, Quality, Global Supply Chain, Operations and Contract Manufacturers to resolve issues pertaining to component selection and use. 

• Complete understanding/working knowledge of engineering documentation (i.e., schematics, component data sheets, Gerber files, etc.) and standard document control practices (ECRs, ECOs, deviations, etc.) 

• Ability to work on multiple cross functional projects simultaneously. 

• Ability to develop strong relationships with key stakeholders to drive proper rigor in the supplier selection process. 

• Self-motivated, resourceful, and ability to work in a fast-paced environment. 

• Ability to manage rapid changes typical during the NPI development process. 

• Experience with Arena Product Lifecycle Management (PLM) or equivalent and quality management system (QMS) required. 

• Experience with schematic tools like Cadence\Altium\Siemens is a plus. 

• Experience with electronic database management tools like Silicon Expert, Z2Data, or IHS Markit preferred. 

• Experience with MS Dynamics 365 Enterprise Resource Planning (ERP) System preferred. 

• Experience with Jira project and issue tracking preferred. 

• Experience with Quip, SharePoint and other collaboration tools preferred. 

• Excellent communicator, ability to lead and influence change in the face of complexity and ambiguity.  

• Analytical, fact based with keen attention to detail. 

• Proficient in managing and understanding cross-cultural business practices. 

• Experience in electronic and mechanical component analysis and selection. 

• Familiarity with manufacturing and design environments. 

• Excellent oral and written communications skills. 

• Ability to work with little or no supervision. 
• Willingness to learn new skills and stay up to date on the latest technologies. 
• Familiarity with conflict mineral reporting and other compliance/EHS related tasks 
• Strong interpersonal skills 

• Very organized and high attention to detail. 

• Able to work under high pressure and deliver results. 

• Located or willing to relocate to Scottsdale, AZ. 

• Ability to influence, create win/win situations, and produce results. 
• Previous design experience, schematic capture and layout. 

Benefits that Benefit You 

• Competitive salary and 401k with employer match 

• Discretionary paid time off 

• Paid parental leave for all 

• Medical, Dental, Vision plans 

• Fitness Programs 

• Emotional & Mental Wellness support 

• Learning & Development programs 

• And yes, we have snacks in our offices 

Benefits listed herein may vary depending on the nature of your employment and the location where you work 

Your Impact

As a key member of our Validation team, you’ll help ensure every product and system meets the highest standards before it reaches our customers. You’ll develop Validation Test Procedures (VTPs), create comprehensive test plans, and collaborate with R&D and other teams to execute testing from start to finish. Your technical expertise will guide product evaluations, uncover issues, and drive resolutions alongside cross-functional partners. In this role, you’ll work closely with Engineering, Manufacturing, Quality Assurance, Project Management, and Supply Chain—making your communication skills just as important as your technical know-how.

What You’ll Do
Location: Onsite at our Deer Valley, Arizona location
Reports to: Manager, Hardware Validation & Reliability Engineering
Direct Reports: none

• Develop comprehensive test plans for our products
• Incorporate Statistical Analysis into Validation Testing
• Review & provide input into System & Product Requirements.
• Test Axon product capabilities & features to confirm requirements are met and ensure a smooth customer experience.
• Understanding troubleshooting firmware/software or hardware issue at a system level.
• Participate in occasional field testing of Axon products
• Work with a team of skilled technicians to ensure timely execution of the test plans
• Provide status updates and recommendations based on data results, and lead final reporting of validation efforts
• Leverage Engineering background to improve tests and processes
• Design and hone Validation Test Procedures with an emphasis on repeatability, standardization, and accuracy of testing
• Lead and oversee execution of all validation tests – including Firmware/Software, Mechanical, Environmental, and Electrical
• Document, track, and report test status and results to Engineering teams, following Good Documentation Practices (GDP).
• Support Failure Analysis (FA) and Root Cause Analysis (RCA) on issues found in test
• Work with external labs to coordinate required testing
• Implement and maintain 5S Standard for lab organization and management
• Develop customer usage models of all products

What You Bring

• MS or BS Degree in Engineering, Mechanical, Electrical, Electromechanical, Reliability or equivalent.
• Minimum of (5 years) of experience with validation or qualification testing
• Mechanical and Environmental test experience
• Test standards experience (MIL-STD, ISO, IEC, etc.)
• Test automation and basic code scripting, experience.
• Willingness to drive department improvement efforts
• Good attention to detail and documentation
• Experience in a regulated environment, a plus
• Experience with identifying, reproducing, documenting, and reporting bugs or issues
• Experience presenting test plan and requirements to stakeholders
• Understanding of Product Development Life Cycle
• Familiar with Project Management skill set, certified PMP a plus
• Familiar with Bug and Test Tracking Suites such as JIRA a plus
• Experience with manufacturing and assembly process
• Excellent analytical and problem-solving skills
• Excellent skills in MS Office products
• Ability to influence multi-functional organizations
• Certification in Six Sigma Black Belt or Green Belt ,a plus

Benefits that Benefit You

•Competitive salary and 401k with employer match
•Discretionary paid time off
•Paid parental leave for all
•Medical, Dental, Vision plans
•Fitness Programs
•Emotional & Mental Wellness support
•Learning & Development programs
•And yes, we have snacks in our offices

Benefits listed herein may vary depending on the nature of your employment and the location
where you work

As a Senior Engineer, Global Product Management at ASM, you’ll experience a dynamic and diverse scope of responsibilities that go beyond what’s typically offered at larger organizations. This role is ideal for someone who thrives in a fast-paced, intellectually stimulating environment and values autonomy, innovation, and cross-functional collaboration. 

You’ll be empowered to think creatively and strategically, working closely with global customers and internal teams to deliver cutting-edge solutions. Every day brings new challenges and opportunities to make a meaningful impact across the product lifecycle—from concept to commercialization. 

Key Responsibilities:  

• Product Lifecycle Management: Lead products from initial concept through high-volume manufacturing to end-of-life, ensuring alignment with market needs and business goals. 
• Roadmap Development: Own and maintain product roadmaps across a portfolio, updating regularly through customer insights and internal collaboration. 
• Product Definition: Own and maintain product structure, configuration, and options to support customer requests and efficient manufacturing execution.
• Customer Engagement: Drive technical discussions, create impactful presentations, and conduct detailed market and competitive analyses to support customer interactions.
• Market Requirements Specification (MRS): Develop and manage MRS documents to guide product development priorities and ensure alignment with customer expectations.
• Strategic Marketing: Craft go-to-market strategies, support executive R&D investment decisions, and develop high-level product strategy presentations.
• Financial Analysis: Collaborate with finance to assess product viability using NPV and IRR models; maintain cost-of-ownership frameworks.
• Business Planning & Market Analysis: Contribute to operational planning, business forecasting, and budget development through market intelligence and competitive analysis.
• New Product Introduction (NPI): Conduct market inflection analysis, develop business cases, align internal stakeholders, and position products for successful launch.
• Technical Collaboration: Partner with development teams to define specifications, manage demo requests, and prioritize product development efforts.
• Supplier Engagement: Build strategic supplier relationships to enable key capabilities for new products.
• Product Promotion: Create promotional content for conferences and product launches; deliver training and support to sales teams and customers. 

Requirements: 

• 3–10 years of experience in technical marketing within the semiconductor, capital equipment, or related industries 

• Advanced degree (Master’s or PhD) in Material Science, Electrical, Chemical, or Mechanical Engineering (or equivalent) 

• Strong background in semiconductor processes, hardware, or device technologies 

• Experience with ALD, CVD, Epi, or vacuum systems is a plus 

• Deep understanding of capital equipment systems and their applications 

• Proven track record of direct customer engagement and supplier management 

• Ability to collaborate across disciplines and manage a diverse product portfolio 

• Solid grasp of product lifecycle and technical marketing principles 

• Willingness and ability to travel globally 

Your Impact

As a Senior Member of Axon's Video Electrical Engineering team, you will lead the design, development, and testing of advanced electronics critical to cutting-edge video products and related devices. Your extensive technical expertise, strong understanding of engineering processes, and passion for technology will drive the creation of innovative solutions that exceed the rigorous demands of our customers.

In this role, you will:

• Own the design of critical electronic circuits and systems.
• Collaborate globally with cross-functional engineering teams to deliver world-class products.
• Mentor and inspire junior engineers, fostering technical growth across the team.

Join a dynamic team of innovators dedicated to solving complex challenges, delivering technologies that empower Law Enforcement, Public Safety, and their communities.


Your Day-to-Day

• Research, propose, and develop innovative, industry leading circuit designs for Axon’s future-generation video products, wired and wireless devices, and/or low power accessories.
• Lead project team EE’s and design partners, joining forces to achieve successful completion of hardware objectives.
• Use OrCAD to create embedded mixed-signal circuit schematics, integrating components like application processors, image sensors, high speed memory, high speed digital communication buses, RF transceivers, power supplies, battery charging systems, and more.
• Partner with PCB Design engineers to define, review, and optimize printed circuit board layout designs using Allegro or other layout tools
• Bring up, characterize, optimize, and debug systems and circuits using lab tools such as oscilloscopes, spectrum analyzers, logic analyzers, power supplies, etc.
• Team up with RF Engineers to integrate and validate critical RF circuitry for wirelessly connected devices.
• Assess design outcomes, test results, and related information and present findings to design team and management.
• Enhance design performance through simulation, measurement, and iteration to meet product, system, and regulatory requirements.
• Develop, evaluate, and finalize Bill of Materials and other design documentation needed for product release.
• Share knowledge, guide team members, and help elevate the team’s technical capabilities.

Basic Qualifications

• Bachelor’s degree in Electrical Engineering or similar engineering discipline
• 7+ years of industry embedded electronics design experience with a major focus on designing high-speed, high-density, portable, battery-powered devices, robotics, or low-power vehicular embedded circuits.
• Creative and passionate about innovative design and cutting-edge technology
• Demonstrated ownership of embedded electronics design across multiple subsystems, such as:
• Microcontroller and high-speed applications processors
• Image sensors or image sensor modules
• High speed memory subsystems (DDR4, DDR5, eMMC, xMCP)
• Power delivery networks (SMPS, LDO, PMIC)
• Lithium batteries and charging circuitry
• Audio subsystems (Codec, Mics, Speakers)
• RF integration (GNSS, BT, LTE, 5G)
• High- and low-speed wired interfaces (Ethernet, USB3.x, I2C, SPI, UART)
• Sensor integration (IMU, Radar, TOF)
• Rigid, Flex, and Rigid-Flex PCB design
• Skilled in high-speed, high-density hardware design, including system architecture development, component selection, schematic design, PCB layout management, design verification testing and debug.
• Proficient leading electronics design and development from concept to mass production
• Experience with technical oversight of design partners, ODMs, and JDMs leading to successful electronics design.
• Strong proficiency with point of load power supply design (Switch mode, linear regulators), PMIC integration, power tree development, and power consumption analysis
• Experience with Lithium batteries and battery charging circuit design
• Experience with RF transceiver integration including LTE, Wi-Fi, and GNSS.
• Exceptional hands-on proficiency with electronics bring-up, characterization, and debug using laboratory tools: Oscilloscope, power supplies, multimeters, and custom jigs
• Strong schematic design proficiency using industry leading design tools, including BOM development. Experience with Cadence/OrCAD is preferred.
• Collaborates effectively with PCB engineers to deliver successful PCB designs for multilayer HDI rigid, rigid-flex and flex boards. Experience with Allegro Viewer a plus.
• Experienced in designing electronics to pass regulatory standards (FCC, CE, IEC, etc).
• Independent contributor capable of developing products within cross-functional and geographically diverse engineering teams
• Solid skills with documentation, analysis, and presentations tools, such as Word, Excel, PowerPoint

Compensation and Benefits (these should stay the same)

• Competitive salary and 401K with employer match
• Paid time off at your discretion
• Robust parental leave policy
• An award-winning office/working environment
• Ride along with police officers to see them use our technology and get inspired
• And more...

Your Impact

As a member of the Video Electrical Engineering Sustaining team, you will play a key role in maintaining, debugging, qualifying, and improving the electronics designs behind Axon’s in-market video products. This includes wirelessly connected body-worn cameras, in-vehicle camera systems, high-speed docking stations, and other mass-produced devices. Your technical expertise, engineering process knowledge, and hands-on design and debug skills will be essential to sustaining product continuity by addressing component obsolescence, facilitating design improvements, resolving critical field and production issues, and supporting regulatory testing needed to maintain global certifications or enable entry into new markets.

In this role, you will own design improvement activities while collaborating across cross-functional teams and global partners to help maintain truly world-class products. You will join a passionate engineering team devoted to solving complex challenges and delivering technologies that make a meaningful difference for Law Enforcement, Public Safety, and the communities they serve.

Work Location: This role is based out of our Scottsdale, AZ office. We rely on in-person collaboration and ask that team members work onsite Monday through Fridays unless there is an approved workplace accommodation. We believe that connection fuels innovation, and our in-office culture is designed to foster meaningful teamwork, mentorship, and shared success.

Reports to: Director, Electrical Engineering

What You'll Do 

• Update in-market circuit designs to address component obsolescence, approved component substitutions, second-source requests, cost reduction opportunities, and other post-launch design improvements for mass-produced electronics.
• Partner with cross-functional engineering teams, technology partners, and manufacturing teams to own electronics sustainment throughout the post-launch product lifecycle.
• Execute bench verification and performance evaluation of components and circuits using standard laboratory equipment such as oscilloscopes, spectrum analyzers, logic analyzers, and power supplies.
• Perform hands-on debug, failure analysis, and rework of electronic systems, circuits, and components.
• Use OrCAD Capture and related design tools to update embedded mixed-signal circuit designs for complex electronic products, including processors, sensors, memory, power, audio, RF, and PCB assemblies.
• Work closely with PCB design engineers to define, implement, review, and release PCB layout updates using Allegro or similar layout tools.
• Test and evaluate baseline RF performance of wireless subsystems, including cellular, Wi-Fi, Bluetooth, and GNSS, in assigned in-market products.
• Develop test methods, execute system- and component-level verification, and drive test plans to validate electronic design changes.
• Document design changes, test results, and technical conclusions, and communicate findings clearly to design teams and management.
• Provide hardware support to global regulatory compliance teams, including sample preparation, documentation, and debug, for certifications such as FCC, IC, CE, and PTCRB.
• Update, review, and finalize BOMs and other design documentation to support engineering changes and production release.

What You Bring

• Bachelor’s degree in Electrical Engineering or a related engineering discipline.
• 4+ years of industry experience in electronics design or sustaining engineering for mass-produced, high-speed, high-density, portable battery-powered embedded devices or vehicular embedded electronics.
• Experience identifying and implementing alternate-source electronic components and related circuit changes to improve product quality, address obsolescence, and reduce supply chain risk in production hardware.
• Experience executing engineering change orders, including updates to BOMs, schematics, and PCB layouts.
• Well-developed foundation in analog and digital circuit design.
• Experience with component selection, circuit design, and verification testing in multiple areas such as power supplies, processors and microcontrollers, memory subsystems, wired interfaces, audio, RF subsystems, sensors, protection circuitry, connectors, batteries, and PCBAs/flex PCBAs.
• Experience with high-speed design and validation for hardware interfaces such as USB 3.x, Ethernet, RF, and DDR memory.
• Working knowledge of RF integration and test for Bluetooth, BLE, Wi-Fi, GNSS, and cellular systems.
• Strong hands-on lab skills for board bring-up, characterization, debug, and failure analysis using standard electrical engineering lab equipment.
• Proficiency with schematic capture and BOM development using industry-standard tools; Cadence/OrCAD preferred.
• Experience collaborating with PCB layout engineers to inspect, optimize, and release designs to fabrication; Allegro Viewer experience is a plus.
• Experience supporting regulatory compliance testing and debug for standards such as FCC, CE, and PTCRB.
• Ability to create test plans to validate component and circuit-level changes.
• Proven ability to work autonomously in cross-functional and geographically distributed teams.
• Strong written and verbal communication skills, including documentation, analysis, and presentation development.
•  

Benefits that Benefit You

• Competitive salary and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• And more...

#LI-Onsite

The Key Account Technologists are the ASM product experts who support extensive customer and internal company contacts while driving the introduction of new products, product improvements, and product modifications.  As a Key Account Technologist (KAT) you'll help to expand product market share by helping win development tool of record (DTOR) selections and supporting competitive process application performance of the installed base. Further, the role requires someone who is not only skilled in R&D/Innovation, development, engineering, and design for manufacturability, but also someone who can be a key team member developing and delivering the ALD technology roadmap. This role requires interactions and communication between the product development team and the customer to ensure customer issues and concerns are being addressed with solutions and timelines.  A persistent approach to Product Life Cycle (PLC) will also be required to achieve strong engagement with the new product development team. This position requires Korean, Japanese or Mandarin language skills.

RESPONSIBILITIES:

• Responsible for process application NPI (New Product Introduction), product improvements, and product modifications for key product unit (KPU) installed base
• Develop and maintain relationships with key customers.
• Responsible for managing all the technical account aspects of customers
• Responsible for resolution of process and hardware-related escalations in the field
• Responsible for defining, maintaining, and implementing BKM process for all process applications – including standards, specs, and recipes, installed base performance
• Support highly engaged working relationship between KAT department, ASM’s customer account teams and customers’ engineers to ensure all customer needs and requirements are understood and addressed
• Drive close cooperation with multiple internal stakeholders, especially with Process Development teams, Global Sales, Service and Spares, Account Teams, Engineering and Global Product Management (GPM)

Key SELECTION CRITERIA:

• Excellent Korean, Japanese, or Mandarin language skills, both written and spoken
• 5+ years (or 3+ years with Ph.D.) experience in the semiconductor wafer processing or capital equipment industry
• Master’s degree (or above) in material science, physics, chemical, mechanical or electrical engineering, or related field
• Related work experience can include process engineering, technical marketing, or product support
• Proven ability to drive continuous improvement across operations
• Able to build long term relationships of trust with customers
• Strong written and verbal communication skills including excellent presentation and influencing skills
• Semiconductor experience should be primarily focused on atomic layer deposition (ALD) or chemical vapor deposition (CVD).
• Experience in work function, metallization, silicides, and electrodes in logic or memory is preferred

PERSONAL / professional ATTRIBUTES:

• Self-starter with high energy and strong work ethic
• Highly motivated and results driven
• A proactive change agent
• A strategic thinker with the ability to implement and drive tactics, strong at execution
• A problem solver – communication comes naturally when solving problems and addressing roadblocks.
• Able to independently make and execute decisions in a timely manner, leading people accordingly
• Ability to lead and influence others across cultures
• Highly collaborative and able to manage conflict

Travel:

• Flexibility to travel up to 30% of the time (internationally)

As a Senior Process Engineer at ASM, you will work with semiconductor processing and analytical equipment to research, develop and optimize processes focused on oxidation, annealing, curing, Atomic Layer Deposition (ALD) for logic, memory, analog, power, and MEMS applications. You will design and conduct complex experiments, measurements and perform the interpretation of complex experimental output. While you deliver creative and inventive solutions, technical publications, and generation of Intellectual Property (IP) are an essential function of this position. This position requires Korean, Japanese or Mandarin speaking skills.

Key Responsibilities 

• Creative problem solver with experience in developing new films for emerging applications and experience in chemistry/materials characterization.
• Works with semiconductor processing equipment to research, develop and optimize unit processes focused on the deposition of metal and dielectric films via ALD.
• Bringing innovative ideas, staying abreast of state-of-the-art processing applications in the semiconductor industry to be effective.
• Process consulting and accountability including technical papers on advanced process applications and Intellectual Property creation.
• Participates in and drives technical problem-solving sessions using the related scientific method and industry tools, such as Ishikawa diagrams.
• Designs and conducts experiments, in addition to measuring and interpreting experimental output, aimed at fulfilling stated objectives using Design of Experiments (DOE) and Response Surface Methodology (RSM).
• Troubleshoots equipment problems and is personally and actively engaged in problem via “hands-on” modalities.
• Works with customers and central marketing to understand and define requirements to successfully execute and document customer demonstrations.
• Develops methods and techniques for integrating metal and/or oxide films into existing and future device technologies.
• Ensures successful product transfer to customer base by performing demonstrations, training field service personnel, traveling to support remote sites (up to 10% travel required), and drafting documentation regarding process development, tool operation and maintenance.
• Produces technical papers on process, equipment, and device integration improvement strategies and presents to professional audience.
• You may be assigned supervisory duties over supporting process engineering technicians and aides. These supervisory duties could include direct input into employees’ performance evaluations, discipline, and discharge.

Qualifications

• Master’s or PhD degree in Chemical Engineering, Materials Science, Chemistry, or Physics.
• Experience with Atomic Layer Deposition (ALD)
• Knowledge of electrical characterization techniques for CMOS devices.
• Application of dielectric and/or metal films for logic and memory structures.
• Training in CFD (computational fluid dynamics), either theoretical or practical is preferred.
• Knowledge of electrical characterization techniques for CMOS devices is preferred.

  Skills

• Ability to independently manage complex process development projects, including personnel, project schedules, experimental thrusts, hardware procurement and budgetary oversight.
• Ability to be a process consultant to internal and external customers.
• An authority on interplay between hardware design (e.g., chemical reactor design) and operation and process outputs
• Understanding of requirements for integration of metals as work function materials and barrier layers in FEOL and BEOL process flows
• Demonstrated ability to develop and completely characterize deposition processes using first principles and experimental design techniques (e.g., DOE, RSM).
• Experience with the theory, practice, and interpretation of materials characterization techniques such as XPS, SIMS, RBS, AFM, XRD, HRTEM, FESEM, Auger, Raman and ellipsometry.
• Excellent verbal and written communication skills, with ability to clearly communicate advanced technical constructs in direct and concise manner.

The Key Account Technologists are the ASM product experts who support extensive customer and internal company contacts while driving the introduction of new products, product improvements, and product modifications.  As a Key Account Technologist (KAT) you'll help to expand product market share by helping win development tool of record (DTOR) selections and supporting competitive process application performance of the installed base. Further, the role requires someone who is not only skilled in R&D/Innovation, development, engineering, and design for manufacturability, but also someone who can be a key team member developing and delivering the PECVD technology roadmap. This role requires interactions and communication between the product development team and the customer to ensure customer issues and concerns are being addressed with solutions and timelines.  A persistent approach to Product Life Cycle (PLC) will also be required to achieve strong engagement with the new product development team.

Responsibilities:

• Responsible for process application NPI (New Product Introduction), product improvements, and product modifications for key product unit (KPU) installed base
• Develop and maintain relationships with key customers.
• Responsible for managing all the technical account aspects of customers
• Responsible for resolution of New process escalations in the field during NPI stage
• Responsible for defining and implementing BKM process for all process applications – including standards, specs, and recipes, installed base performance
• Support highly engaged working relationship between KAT department, ASM’s customer account teams and customers’ engineers to ensure all customer needs and requirements are understood and addressed
• Drive close cooperation with multiple internal stakeholders, especially with Process Development teams, Business Development Team, Account Teams, Engineering and Global Product Management (GPM)

Qualifications:

• 5+ years (or 3+ years with Ph.D.) experience in the semiconductor wafer processing or capital equipment industry
• Master’s degree (or above) in material science, physics, chemical, mechanical or electrical engineering, or related field
• Related work experience can include process engineering, technical marketing, or product support
• Proven ability to drive continuous improvement across operations
• Able to build long term relationships of trust with customers
• Strong written and verbal communication skills including excellent presentation and influencing skills
• Semiconductor experience should be primarily focused on PECVD.
• Experience in work function, metallization, silicides, and electrodes in logic or memory is preferred

Attributes:

• Self-starter with high energy and strong work ethic
• Highly motivated and results driven
• A proactive change agent
• A strategic thinker with the ability to implement and drive tactics, strong at execution
• A problem solver – communication comes naturally when solving problems and addressing roadblocks.
• Able to independently make and execute decisions in a timely manner, leading people accordingly
• Ability to lead and influence others across cultures
• Highly collaborative and able to manage conflict

Travel:

• Flexibility to travel up to 30% of the time (internationally)

Be the Expert Others Rely On—Advance EPI Technology at ASM

Global Product Support Engineer

At ASM, our technology enables the world’s most advanced semiconductor manufacturing—and when the challenges are toughest, our experts step in. We’re seeking a Senior Global Product Support Engineer who thrives on solving complex problems, supporting cutting‑edge tools, and making a real difference for customers and field teams worldwide.

In this role, you’ll serve as the go‑to technical authority, supporting advanced EPI systems when issues demand deep expertise beyond first‑line support. Your work will directly impact tool performance, customer confidence, and ASM’s reputation for technical excellence.

What You’ll Do

As a Global Product Support Engineer, you’ll operate at the highest technical level, combining hands‑on problem solving with global collaboration:

• Provide advanced technical support for complex electro‑mechanical equipment and sophisticated software systems
• Diagnose, troubleshoot, repair, and debug issues escalated by field engineers and product support teams
• Act as the escalation point when standard troubleshooting paths are exhausted, delivering clear solutions under pressure
• Partner with engineering teams by reporting design, reliability, and maintenance insights that drive continuous improvement
• Support customer installations and deliver technical training when deeper expertise is required
• Engage directly with customers to resolve highly technical issues and ensure optimal system performance
• Travel globally (up to 50%) to support field operations, customer sites, and critical escalations

What We’re Looking For

You bring strong semiconductor experience, technical depth, and the confidence to lead in high‑stakes situations:

• Proven experience diagnosing and resolving complex technical issues
• Minimum 3 years of experience in semiconductor manufacturing environments
• Bachelor’s degree in Engineering (Mechanical or Electrical Engineering preferred)
• Strong understanding of electro‑mechanical systems and software‑driven equipment
• Excellent analytical and problem‑solving skills
• Ability to clearly communicate complex technical concepts to both technical and non‑technical audiences
• Strong presentation skills and comfort leading technical discussions
• Willingness and ability to travel locally and internationally up to 50%
• Customer‑focused mindset with the ability to remain effective in challenging, time‑critical situations

As a Senior Principal Engineer, Global Product Management, you’ll drive ASM’s product strategy and market leadership by shaping the product roadmap, overseeing the full product lifecycle, and engaging with customers to deliver solutions that push the boundaries of innovation. This role offers the unique opportunity to work across disciplines, collaborate with internal and external stakeholders, and influence the future of semiconductor technology.

What you will be working on

• Product Strategy & Roadmap – Identify key market opportunities and develop product roadmaps to enhance ASM’s market position.
• Product Lifecycle Management – Drive products from concept to high-volume manufacturing and eventual obsolescence.
• Market Requirements Specification (MRS) & Business Planning – Define market requirements, conduct competitive analysis, and develop business plans.
• Customer & Supplier Engagement – Lead technical discussions with customers, create strategic presentations, and coordinate with suppliers to optimize cost, specifications, and timelines.
• Financial & Market Analysis – Work with finance to assess product profitability, manage cost models, and develop pricing strategies.
• New Product Introductions – Support product positioning, go-to-market strategies, and executive alignment for new product launches.
• Technical & Marketing Support – Develop key marketing materials, support sales training, and lead product promotions at conferences.

What we are looking for

• PhD in Materials Science, Electrical Engineering, Chemical Engineering, or a related technical field.
• 5+ years of experience in semiconductor process engineering or semiconductor equipment technology.
• 3+ years of experience in customer support, product management, or product marketing roles.
• Strong understanding of semiconductor capital equipment, supply chain, and product lifecycle management.
• Ability to work cross-functionally and influence internal and external stakeholders.
• Experience engaging directly with customers, presenting technical marketing materials, and defining product value propositions.

What sets you apart

• Experience in competitive analysis, product segmentation, and pricing strategies.
• Strong proficiency in Excel modeling, project management, and analytical skills.
• Demonstrated ability to lead and develop teams while driving strategic initiatives.

As a Process Productivity Engineer at ASM, you will work with our customers as a system level expert focused on product support for new product development. This role will require 25-50% domestic and international travel (depending on product cycle).

Responsibilities: 

• Drives and owns top customer productivity issues (e.g., defect reduction, tool matching, tool availability, etc.) for products in the field across the product life cycle, from new product introduction through high volume manufacturing.  
• Interaction with Hardware, Electrical, Controls, Product Support, Process, and Software engineering teams to become the system level expert on new products transferred to the field. Become an expert on the interaction of the products with the customer processes and resulting tool productivity.
• Provides guidance to engineering during the design phase of new products on key customer requirements and needs, including productivity specifications (e.g., defects, tool matching, throughput, etc.) and process best practices.
• Designs and conducts experiments, in addition to measuring and interpreting experimental output, aimed at fulfilling stated objectives using Design of Experiments (DOE) and Response Surface Methodology (RSM).
• Troubleshoots equipment problems and is personally and actively engaged in problem via “hands-on” modalities.
• Owns marathon qualification of new processes and products in the development lab, including data collection, analysis, and improvement plans. Works closely with Process, Product Support, and Hardware engineering teams providing real time feedback of marathon issues and recommended solutions.
• Ensure processes follow best known practices throughout the product life cycle, from before the first eval shipment through the HVM ramp. Share and proliferate new solutions across internal teams, including Process, Product Support, and Field Support engineering teams.

Education and Requirements:

• Master’s or PhD Degree in Chemical Engineering, Materials Science, Chemistry, Physics, Mechanical Engineering, Electrical Engineering, or related degree.
• Hands-on and/or course work experience with hardware.
• Strong technical troubleshooting and root cause analysis skills.
• Demonstrated ability to characterize processes and/or hardware using first principles and experimental design techniques (e.g., DOE, RSM).
• High motivation, enthusiasm and curiosity to learn.
• Interested in working with new products, testing them and becoming a system level expert.
• Excellent verbal and written communication skills, with ability to clearly communicate advanced technical constructs in direct and concise manner.
• Statistical analysis and script writing in Python, Matlab, or similar is a plus.
• Ability to travel (domestic and international) 25-50%