ABOUT THE JOB

We are seeking a highly motivated and experienced Electrical Engineer to join our team in Costa Mesa, California. You will work closely with the program leadership and a wide spectrum of cross-departments as part of a team focused on solving hard problems and changing the industry forever. In this role you will be responsible for designing and supporting the integration of various subsystems, supporting testing efforts, and ensuring overall system performance meets the required specifications and standards. Join our dynamic team and help us build the next generation of autonomous flight systems.

WHAT YOU'LL DO

• Full cycle PCB design including collecting requirements, schematic design, component selection, supervision or completion of layout, bring-up, test, debug and system integration
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both lab equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools
• Development of payloads and subsystems (sensors, payload interfaces, power management, and networking)
• Develop system interconnect diagrams and define wire harnesses that connect electronic equipment within a subsystem
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products
• Work in a fast-paced environment supporting new developments and customer operated hardware
• Conduct peer-level and cross-discipline design reviews
• Design and support the integration & testing of an rotorcraft system through TRLs 3-8.
• Conduct vehicle platform system design & analysis as required by your supported program or effort
• Conduct design reviews, perform requirements analysis, and plan system verification to ensure compliance with project goals and industry standards
• Work within a dynamic team of multidisciplinary engineers and specialists throughout the life of product design, integration, and test effort

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 5+ years of experience designing, testing, and troubleshooting complex board designs
• Knowledge of modern analog and digital electronics and electronic circuits.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Familiarity with software development processes and tools such as git, Github, JIRA, etc
• Comfortable with a variety of electronic CAD tools (Altium preferred, Eagle and others acceptable)
• Experience in design for signal integrity / power integrity
• Experience with battery systems and ability to support alternate battery systems design
• Experience with high reliability systems
• Experience with radio frequency-based systems
• Experience with rapid payload/sensor integration
• Experience in designing and integrating high power electronics
• Experience in fieldable system design
• Comfortable in conducting worst case circuit or uncertainty analysis
• High-ownership and a bias toward action – if you see a problem, you want to solve and fix it
• Eligible to obtain and maintain an active U.S. Secret security clearance
• Ability to travel 25% with potential surges above 25%

PREFERRED QUALIFICATIONS

• Experience designing electrical and power systems for autonomous rotorcraft.
• Experience with battery systems both primary and secondary chemistries.
• Experience with High Voltage Power Electronics.
• Experience with inverters and high power electric motors.
• Understanding of MIL-STD-461, MIL-STD-810G
• Outstanding leadership and interpersonal skills
• Familiarity with running a qualification campaign for flight hardware
• Familiarity with designing for rugged environments
• Experience with electro-mechanical and electrical design concepts
• Experience with Formula SAE, Baja SAE, Design Build Fly, etc.

• Execute comprehensive test plans: set up, configure, and operate benchtop test equipment (oscilloscopes, power supplies, multimeters, signal generators, etc.) to verify performance of PCBs and integrated electronic systems.
• Perform precision PCB rework and assembly, including surface-mount (SMT) and through-hole soldering, component replacement, and jumper wire installation under a microscope. This also includes conformal coating and staking operations.
• Build, assemble, and modify complex cable and wire harness assemblies, including crimping contacts, soldering various connector types, and routing wires according to schematics and build documentation.
• Troubleshoot and diagnose failures in electronic assemblies (PCBs and harnesses) down to the component level using schematics, layouts, and wiring diagrams, then execute necessary repairs.
• Accurately document test data, rework actions, assembly details, and failure modes to support engineering analysis and continuous improvement.
• Lab maintenance: Assist in maintaining the lab environment to clean and safe standards, including equipment calibration.

• 4+ years of hands-on experience in electronics testing, assembly, and rework in an R&D or production environment.
• Strong technical literacy: Ability to read and interpret complex electrical schematics, assembly drawings, wiring diagrams, bill of materials (BOMs), and technical datasheets.
• Demonstrated proficiency in fine-pitch SMT and through-hole soldering (IPC J-STD-001 or equivalent standards). Experience with PCB rework, component replacement, and modification.
• Proven experience in building and modifying complex cable and wire harness assemblies, including crimping, soldering various connector types, and routing (IPC-620 or equivalent standards).
• Proficiency in diagnosing electronic failures to the component level using standard test equipment and documentation.
• Understanding of product development lifecycles, reliability, and compliance testing.
• Excellent written, verbal, interpersonal and communication skills.
• Self-organizing: Able to prioritize simultaneous tasks in an electronics lab/test environment.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

• Education: Associate degree in Electrical/Electronics, Computer, Mechanical Technologies, or related fields.
• Active IPC-610, IPC-620, and J-STD-001 certifications.
• Experience using ECAD viewers (Altium, Eagle, OrCAD, etc.) to locate components on a board layout.
• Environmental testing: Familiarity with thermal chambers, vibration tables, and burn-in procedures.

Job Description

• Develop and perform system validation tests using leading-edge Data Center equipment and scalable automation platforms. The validation team holds customers’ system requirements in the highest regard and is solely responsible for certifying a product’s conformance to this high bar.
• Understand the performance and functionality requirements our AI fabric Switches must deliver to enable customers developing Data Center systems using Astera Labs’ game-changing portfolio of connectivity products for Artificial Intelligence and Machine Learning applications.
• Formulate a comprehensive validation plan for AI fabric switch products. automate the testing of ICs and board products in a data-centric manner, design experiments to root-cause unexpected behavior, report results and specification compliance in an automated fashion.
• Work with key customers directly to understand their care-abouts and highlight the unique capabilities and performance of Astera Labs’ solutions.

Basic Qualifications 

• Strong academic and technical background in Electrical or Computer Engineering. At a minimum, a Bachelor’s is required, and a Master’s is preferred.
• ≥3 years' experience supporting or developing complex SoC/silicon products for Server, Storage, and/or Networking applications.
• Basic understanding of x86/ARM architecture, UEFI/Linux boot sequence. 
• Good understanding of High Speed Signaling Principles.
• Professional attitude with the ability to prioritize a dynamic list of multiple tasks, to plan and prepare for customer/internal meetings in advance, and to work with minimal guidance and supervision.
• Entrepreneurial, open-mind behavior and can-do attitude. Think and act with the customer in mind!

Required Experience 

• Hands-on, thorough knowledge of high-speed protocols like  PCIe, CXL, NVMe, or Ethernet.
• Experience with Silicon/System bring-up, validation, and debug experience, including in customer systems.
• A strong background in developing bench automation techniques, especially using Python, with emphasis on execution efficiency, repeatability, data analysis and reporting.
• Experience with lab equipment including protocol analyzers, in-circuit debuggers, and CPU-based tool suites.
• Ability to work on multiple projects.

Preferred Experience 

• Working knowledge of C or C++ for embedded FW and device drivers.
• Familiarity with PCIe compliance standards and ability to follow and be involved in compliance consortiums to adapt the tests to be run from X86/ARM based platforms.
• Knowledge of schematic capture and PCB layout tools from Cadence Allegro, Altium, etc.
• Exceptional interpersonal and collaboration skills, with a proven track record of effectively leading, influencing, and navigating complex matrixed environments.

Your base salary will be determined based on your experience and the pay of employees in similar positions. The base salary range is $135,000 USD - $165,000 USD for Senior Level, and $160,000 USD - $195,000 USD for Staff Level.

ABOUT THE TEAM 

The Anduril Battlespace Awareness Radar team develops state-of-the-art radar systems, deployed to tackle the most significant security challenges of America and its allies. The Radar team is seeking an experienced Senior Electrical Engineer to transform ambitious concepts into manufacturable reality for the next generation of US radars. The Radar team is responsible for all aspects of radar system development, from the ideation stage through initial production.  In this role, you will work closely with an interdisciplinary technical team to design high-speed mixed-signal architectures and circuits, manage signal integrity in complex PCBs, and mature prototypes into products.

ABOUT THE JOB 

TO BE UPDATED 

WHAT YOU’LL DO

• Design combinations of high-speed digital, precision analog, RF, and high-power architectures
• Design embedded electronics from concept to functional prototype, including hardware selection, schematic & PCB design, board bring-up, and system level integration
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both lab equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools
• Work with modern SoCs and networking hardware to build Anduril platforms
• Work closely with firmware/software engineers for processor/peripheral selection, board bring up, and troubleshooting.
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products
• Work in a fast-paced environment, having to juggle multiple concurrent projects and customers.

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering
• 8+ years of experience designing, testing, and troubleshooting complex hardware, embedded systems, and products
• Demonstrated experience with multi-gigabit SERDES, DDR memory busses, Ethernet MAC and PHY interfaces, FPGAs, and common communication busses like SPI and I2C
• Experience with microprocessor and microcontroller selection, configuration, and interfacing
• Experience with component, schematic capture, high speed board design, and guiding PCB layout.
• Competence with test equipment such as oscilloscopes, logic analyzers, debuggers, current-probes, sprectrum/network analyzers, and automation of tests
• Familiarity with product development processes and tools
• Knowledge of embedded software development, including use of timers, interrupts, hardware peripherals such as SPI controllers and ADCs
• Experience with signal integrity and power integrity rules and simulation
• Exceptional organization and communication skills (both written and oral)
• Proficient with Altium Designer or equivalent electronic design tools
• Familiar with common programming languages like Python for test automation.
• Must be eligible to obtain and hold a U.S. Secret Security Clearance

PREFERRED QUALIFICATIONS

• Familiar with RF design and layout
• Past experience with placement and routing of PCBs
• Experience with JESD204 and PCIe
• Familiarity with military standards (MIL-STD-461/704/1275)
• Experience with high speed ADC/DAC's and software defined radios

We request transcripts as part of the early application process to understand your academic background and how your coursework supports the skills deemed critical for the role. Transcripts help us assess your technical and analytical abilities, complementing our interview process in which we also evaluate practical experience and cultural fit. If you choose not to share your transcripts, you will need to provide detailed information regarding your academic performance in relevant courses, including projects and coursework specifics, to ensure we evaluate your academic accomplishments properly. If you do provide academic transcripts, feel free to redact non-technical information (e.g., student ID, dates, non-technical coursework, etc.). Unofficial transcripts obtained online acceptable for this assessment.

CHAOS Industries is redefining modern defense with a multi-product portfolio that gives the ultimate advantage—domain dominance. The company's products are powered by Coherent Distributed Networks (CDN™), empowering warfighters, commercial air operators, and border protection teams to act faster, adapt rapidly, and stay ahead of evolving threats. 

CHAOS Industries was founded in 2022 and has raised a total of $1 billion in funding from leading investors, including 8VC, Accel, and Valor Equity Partners. The company is headquartered in Los Angeles, with offices in Washington, D.C., San Francisco, San Diego, Seattle, and London. For more information, please visit www.chaosinc.com.

Role Overview: 

CHAOS is seeking a Sr. Principal Electrical Engineer with expertise in digital circuit design and signal integrity analysis to serve as a technical authority for high-reliability digital electronics used in aerospace and military applications. This role spans the full product lifecycle, from early architecture and requirements shaping through detailed design, analysis, verification, production support, and fielded system sustainment. 

The ideal candidate is a senior digital hardware technical authority with deep high-speed board design, signal integrity, and power integrity expertise; a track record of setting design direction across programs; and the ability to guide cross-disciplinary teams through ambiguous, high-consequence hardware challenges. 

This is a full-time, on-site position in Hawthorne, CA. 

 
Responsibilities: 

• Act as a technical authority for high-speed digital circuit design, signal integrity, and power integrity across multiple programs or product lines 

• Lead design and review of complex PCBAs involving FPGAs, processors, memory devices, data converters, clocks, high-speed serial interfaces, and mixed-signal boundaries 

• Lead digital hardware architecture trades and define design approaches that satisfy system performance, schedule, manufacturability, reliability, and qualification requirements 

• Set standards, procedures, and review practices for digital board design, stack-up definition, layout constraints, SI/PI analysis, bring-up, and verification 

• Resolve complex cross-disciplinary technical issues involving digital hardware, FPGA/software interfaces, RF coexistence, power distribution, EMI/EMC, thermal behavior, and mechanical packaging 

• Guide PCB layout strategy for controlled impedance, length matching, return paths, grounding, shielding, decoupling, power distribution networks, and isolation of sensitive circuits 

• Serve as the senior technical interface with customers, vendors, suppliers, and internal program leadership for digital hardware topics 

• Mentor engineers and coordinate technical activities across digital, FPGA, embedded software, RF, power, mechanical, manufacturing, and test teams 

• Serve as technical authority for hardware integration, verification, qualification testing, production transition, failure analysis, and field support 

Minimum Requirements: 

• Bachelor's degree in Electrical Engineering with 15+ years of relevant engineering experience 

• Demonstrated technical leadership of complex high-speed digital hardware 

• Strong understanding of digital design fundamentals, including timing, clocking, controlled impedance, signal integrity, power integrity, grounding, decoupling, and return-path management 

• Extensive experience with digital board design involving FPGAs, processors, memory devices, high-speed data converters, and board-level communication interfaces 

• Experience setting PCB layout strategy and design review criteria for high-speed digital, mixed-signal, and high-reliability electronics 

• Hands-on experience leading board bring-up, system integration, troubleshooting, verification, qualification, production transition, and failure analysis activities 

• Demonstrated ability to set technical direction and lead engineers through ambiguous, cross-disciplinary hardware challenges 

• Ability to obtain and maintain a U.S. security clearance 

Preferred Requirements: 

• Advanced Degree (MS or PhD) in Electrical Engineering, Systems Engineering, Physics, Mathematics or related discipline 

• Experience with Avionics platforms 

• Experience using Altium Designer 

• Expertise with signal integrity and/or power integrity analysis tools such as HyperLynx, Sigrity, ADS, Ansys SIwave, or equivalent 

• Experience with DDR, PCIe, Ethernet, JESD204, SERDES, LVDS, or similar high-speed interfaces in high-reliability systems 

• Familiarity with EMI/EMC mitigation techniques and aerospace standards such as RTCA/DO-160, MIL-STD-461, MIL-STD-810, and MIL-STD-1275 

• Experience establishing design standards, analysis templates, qualification approaches, or review processes for engineering teams 

• Experience designing for manufacturability and leading transition from prototype hardware to production 

Why CHAOS?

• Health Benefits: Medical, dental, and vision benefits 100% paid for by the company
• Additional benefits: 401k (+ 50% company match up to 6% of pay), FSA, HSA, life insurance, and more
• Our Perks: Free daily lunch, ‘No meeting Fridays’, unlimited PTO, casual dress code
• Compensation Components: Competitive base salaries, generous pre-IPO stock option grants, relocation assistance, and (coming soon!) annual bonuses
• Team Growth: 250 employees and counting across 5 global offices

The stated compensation range reflects only the targeted base compensation range and excludes additional earnings such as bonus, equity, and benefits. If your compensation requirements fall outside of the range, we still encourage you to apply. The salary range for this role is an estimate based on a range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. 

Recruiting Agencies: CHAOS Industries does not accept unsolicited resumes or outreach. Unsolicited submissions will not be reviewed or compensated.

#LI-onsite

CHAOS Industries is redefining modern defense with a multi-product portfolio that gives the ultimate advantage—domain dominance. The company's products are powered by Coherent Distributed Networks (CDN™), empowering warfighters, commercial air operators, and border protection teams to act faster, adapt rapidly, and stay ahead of evolving threats. 

CHAOS Industries was founded in 2022 and has raised a total of $1 billion in funding from leading investors, including 8VC, Accel, and Valor Equity Partners. The company is headquartered in Los Angeles, with offices in Washington, D.C., San Francisco, San Diego, Seattle, and London. For more information, please visit www.chaosinc.com.

Role Overview: 

CHAOS is seeking a Staff Electrical Engineer with expertise in digital circuit design and signal integrity analysis to lead the design and integration of high-reliability digital electronics for aerospace and military applications. This role spans the full product lifecycle, from requirements definition and architecture trades through schematic design, layout guidance, analysis, board bring-up, verification, production support, and field testing of mission-critical systems. 

The ideal candidate is a digital circuit designer with strong hands-on board design experience, practical signal integrity and power integrity judgment, and the ability to coordinate complex technical tasks across FPGA, software, RF, power, mechanical, manufacturing, and test teams with little supervision. 

This is a full-time, on-site position in Hawthorne, CA. 

 
Responsibilities: 

• Lead design of high-speed digital circuit cards and subsystems in accordance with customer requirements, applicable aerospace and military standards, and internal design practices 

• Design PCBAs involving FPGAs, processors, memory devices, data converters, clocks, high-speed serial interfaces, and mixed-signal boundaries 

• Contribute to digital hardware architectures, detailed schematics, stack-up recommendations, routing constraints, and design analyses for mission-critical electronics 

• Perform signal integrity and power integrity analysis for high-speed interfaces, memory buses, clocks, power distribution networks, and mixed-signal board environments 

• Define PCB layout constraints for controlled impedance, length matching, return paths, grounding, shielding, decoupling, and isolation of sensitive circuits 

• Collaborate with FPGA, embedded software, RF, power, mechanical, manufacturing, and test engineers to ensure digital hardware integrates cleanly within larger systems 

• Plan and support board bring-up, integration, troubleshooting, verification, qualification testing, and production transition activities 

• Generate and maintain schematics, analysis reports, design documentation, BOMs, interface documentation, and test plans 

• Serve as a technical interface with vendors, suppliers, and customers for digital hardware design topics 

Minimum Requirements: 

• Bachelor's degree in Electrical Engineering with 8+ years of relevant engineering experience 

• Experience designing high-speed digital hardware  

• Strong understanding of digital design fundamentals, including timing, clocking, controlled impedance, signal integrity, power integrity, grounding, decoupling, and return-path management 

• Experience with digital board design involving FPGAs, processors, memory devices, high-speed data converters, and board-level communication interfaces 

• Hands-on experience with hardware integration and lab test equipment, including oscilloscopes, logic analyzers, power supplies, and protocol or signal measurement equipment 

• Demonstrated ability to work independently on complex technical problems with a high level of attention to detail 

• Ability to obtain and maintain a U.S. security clearance 

Preferred Requirements: 

• Advanced Degree (MS or PhD) in Electrical Engineering, Systems Engineering, Physics, Mathematics or related discipline 

• Experience with Avionics platforms 

• Experience using Altium Designer 

• Experience with mixed RF, analog, power, and digital electronics in tightly integrated aerospace or defense hardware 

• Experience with DDR, PCIe, Ethernet, JESD204, SERDES, LVDS, or similar high-speed interfaces 

• Familiarity with EMI/EMC mitigation techniques and aerospace standards such as RTCA/DO-160, MIL-STD-461, MIL-STD-810, and MIL-STD-1275 

• Experience performing design margin analysis, derating analysis, tolerance analysis, or worst-case circuit analysis 

• Experience designing for manufacturability and transition to production 

Why CHAOS?

• Health Benefits: Medical, dental, and vision benefits 100% paid for by the company
• Additional benefits: 401k (+ 50% company match up to 6% of pay), FSA, HSA, life insurance, and more
• Our Perks: Free daily lunch, ‘No meeting Fridays’, unlimited PTO, casual dress code
• Compensation Components: Competitive base salaries, generous pre-IPO stock option grants, relocation assistance, and (coming soon!) annual bonuses
• Team Growth: 250 employees and counting across 5 global offices

The stated compensation range reflects only the targeted base compensation range and excludes additional earnings such as bonus, equity, and benefits. If your compensation requirements fall outside of the range, we still encourage you to apply. The salary range for this role is an estimate based on a range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. 

Recruiting Agencies: CHAOS Industries does not accept unsolicited resumes or outreach. Unsolicited submissions will not be reviewed or compensated.

#LI-onsite

CHAOS Industries is redefining modern defense with a multi-product portfolio that gives the ultimate advantage—domain dominance. The company's products are powered by Coherent Distributed Networks (CDN™), empowering warfighters, commercial air operators, and border protection teams to act faster, adapt rapidly, and stay ahead of evolving threats. 

CHAOS Industries was founded in 2022 and has raised a total of $1 billion in funding from leading investors, including 8VC, Accel, and Valor Equity Partners. The company is headquartered in Los Angeles, with offices in Washington, D.C., San Francisco, San Diego, Seattle, and London. For more information, please visit www.chaosinc.com.

Role Overview: 

CHAOS is seeking a Sr. Principal RF Engineer with deep expertise in RF circuit design to serve as a technical authority for high-reliability RF and microwave electronics used in aerospace and defense applications. This role spans the full product lifecycle, from early architecture and requirements shaping through detailed design, simulation, verification, production support, and fielded system sustainment. 

The ideal candidate is an internally and externally recognized RF circuit technical authority who can set technical direction, establish design practices, mentor other engineers, and resolve the most complex RF, microwave, packaging, test, and system integration issues across multiple programs. 

This is a full-time, on-site position in Hawthorne, CA. 

 
Responsibilities: 

• Lead design, analysis, prototyping, and tuning of complex RF circuit boards incorporating catalog MMICs, including LNAs, power amplifiers, baluns, filters, mixers, and associated bias and matching networks 

• Lead architecture development and component trade studies to meet system-level RF performance requirements across programs or product lines 

• Set direction for schematics, layouts, and design documentation in accordance with customer requirements, aerospace standards, and internal design practices 

• Serve as technical authority for linear, nonlinear, and electromagnetic simulations using industry-standard tools (e.g., HFSS, ADS, AWR, or equivalent) 

• Guide PCB layout (Altium) and RF stack-up definition, including impedance control, grounding, shielding, and isolation techniques 

• Lead RF testing and characterization, including integration and troubleshooting at the board, module, and subsystem levels 

• Set direction for the design and specification of RF test equipment, fixtures, and automation 

• Mentor engineers and drive cross-disciplinary technical alignment across systems, power, digital, mechanical, and software teams to ensure RF designs integrate cleanly within larger systems 

• Serve as technical authority from development through production and post-production, including failure analysis and field support 

Minimum Requirements: 

• Bachelor's degree in Electrical Engineering with 15+ years of progressively responsible RF engineering experience 

• Demonstrated technical leadership developing RF hardware for aerospace, defense, avionics, radar, EW, communications, or space systems 

• Expert understanding of RF fundamentals, including gain, noise figure, linearity, phase noise, stability, and impedance matching 

• Hands-on experience leading RF test activities using RF test equipment (e.g., VNAs, spectrum analyzers, signal generators, power meters) 

• Demonstrated ability to lead analysis, troubleshooting, and resolution of complex RF circuit performance issues 

• Strong attention to detail and ability to set technical direction in fast-paced, development-focused environments 

• Ability to obtain and maintain a U.S. security clearance 

Preferred Requirements: 

• Advanced Degree (MS or PhD) in Electrical Engineering, Systems Engineering, Physics, Mathematics or related discipline 

• Recognized expertise with power amplifier design, analysis, and integration 

• Expertise with EMI/EMC considerations for RF systems and compliance with applicable aerospace standards 

• Experience setting direction for mixed-signal or RF/digital interfaces 

• Expert knowledge of manufacturing considerations for RF hardware, including tolerance analysis and yield drivers 

• Experience leading support for production hardware and fielded systems 

• Experience setting RF PCB layout best practices and design-for-manufacturing considerations 

• Familiarity with DO-160, MIL-STD-461, or similar aerospace/defense standards 

• Familiarity with RF antenna design principles 

Why CHAOS?

• Health Benefits: Medical, dental, and vision benefits 100% paid for by the company
• Additional benefits: 401k (+ 50% company match up to 6% of pay), FSA, HSA, life insurance, and more
• Our Perks: Free daily lunch, ‘No meeting Fridays’, unlimited PTO, casual dress code
• Compensation Components: Competitive base salaries, generous pre-IPO stock option grants, relocation assistance, and (coming soon!) annual bonuses
• Team Growth: 250 employees and counting across 5 global offices

The stated compensation range reflects only the targeted base compensation range and excludes additional earnings such as bonus, equity, and benefits. If your compensation requirements fall outside of the range, we still encourage you to apply. The salary range for this role is an estimate based on a range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. 

Recruiting Agencies: CHAOS Industries does not accept unsolicited resumes or outreach. Unsolicited submissions will not be reviewed or compensated.

#LI-onsite

CHAOS Industries is redefining modern defense with a multi-product portfolio that gives the ultimate advantage—domain dominance. The company's products are powered by Coherent Distributed Networks (CDN™), empowering warfighters, commercial air operators, and border protection teams to act faster, adapt rapidly, and stay ahead of evolving threats. 

CHAOS Industries was founded in 2022 and has raised a total of $1 billion in funding from leading investors, including 8VC, Accel, and Valor Equity Partners. The company is headquartered in Los Angeles, with offices in Washington, D.C., San Francisco, San Diego, Seattle, and London. For more information, please visit www.chaosinc.com.

Role Overview: 

CHAOS is seeking a Staff RF Engineer with deep expertise in RF circuit design to lead the design, analysis, integration, and verification of high-reliability RF and microwave electronics for aerospace and defense applications. This role works as part of a cross-functional, agile development team and spans the full product lifecycle, from early architecture and component trade studies through detailed design, testing, production support, and post-production sustainment of mission-critical systems. 

The ideal candidate is an experienced RF circuit designer with strong hands-on experience across RF boards, MMIC-based designs, packaging constraints, and test environments, and can provide sound technical judgment when balancing performance, risk, manufacturability, and schedule. 

This is a full-time, on-site position in Hawthorne, CA. 

 
Responsibilities: 

• Lead design, analysis, prototyping, and tuning of RF circuit boards incorporating catalog MMICs, including LNAs, power amplifiers, baluns, filters, mixers, and associated bias and matching networks 

• Perform architecture development and component trade studies to meet system-level RF performance requirements 

• Develop schematics, layouts, and design documentation in accordance with customer requirements, aerospace standards, and internal design practices 

• Conduct linear, nonlinear, and electromagnetic simulations using industry-standard tools (e.g., HFSS, ADS, AWR, or equivalent) 

• Support PCB layout (Altium) and RF stack-up definition, including impedance control, grounding, shielding, and isolation techniques 

• Plan and execute RF testing and characterization, including integration and troubleshooting at the board, module, and subsystem levels 

• Contribute to the design and specification of RF test equipment, fixtures, and automation 

• Collaborate with systems, power, digital, mechanical, and software engineers to ensure RF designs integrate cleanly within larger systems 

• Serve as a technical contributor from development through production and post-production, including failure analysis and field support 

Minimum Requirements: 

• Bachelor's degree in Electrical Engineering with 8+ years of progressively responsible RF engineering experience 

• Experience developing RF hardware for aerospace, defense, avionics, radar, EW, communications, or space systems 

• Strong understanding of RF fundamentals, including gain, noise figure, linearity, phase noise, stability, and impedance matching 

• Hands-on experience with RF test equipment (e.g., VNAs, spectrum analyzers, signal generators, power meters) 

• Demonstrated ability to analyze, troubleshoot, and resolve complex RF circuit performance issues 

• Strong attention to detail and ability to operate effectively in fast-paced, development-focused environments 

• Ability to obtain and maintain a U.S. security clearance 

Preferred Requirements: 

• Advanced Degree (MS or PhD) in Electrical Engineering, Systems Engineering, Physics, Mathematics or related discipline 

• Experience with power amplifier design, analysis, and integration 

• Familiarity with EMI/EMC considerations for RF systems and compliance with applicable aerospace standards 

• Experience with mixed-signal or RF/digital interfaces 

• Knowledge of manufacturing considerations for RF hardware, including tolerance analysis and yield drivers 

• Experience supporting production hardware and fielded systems 

• Experience with RF PCB layout best practices and design-for-manufacturing considerations 

• Familiarity with DO-160, MIL-STD-461, or similar aerospace/defense standards 

• Familiarity with RF antenna design principles 

Why CHAOS?

• Health Benefits: Medical, dental, and vision benefits 100% paid for by the company
• Additional benefits: 401k (+ 50% company match up to 6% of pay), FSA, HSA, life insurance, and more
• Our Perks: Free daily lunch, ‘No meeting Fridays’, unlimited PTO, casual dress code
• Compensation Components: Competitive base salaries, generous pre-IPO stock option grants, relocation assistance, and (coming soon!) annual bonuses
• Team Growth: 250 employees and counting across 5 global offices

The stated compensation range reflects only the targeted base compensation range and excludes additional earnings such as bonus, equity, and benefits. If your compensation requirements fall outside of the range, we still encourage you to apply. The salary range for this role is an estimate based on a range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. 

Recruiting Agencies: CHAOS Industries does not accept unsolicited resumes or outreach. Unsolicited submissions will not be reviewed or compensated.

#LI-onsite

We are looking for a Staff Quantum Control Hardware Engineer to join our Networking, Sensing, and Security division. As a Staff Engineer, you’ll be part of a cross-functional team whose mission is to lead IonQ on its journey to build the world’s best quantum computers and networked systems to solve the world’s most complex problems.  

In this role, you will design the critical physical layer interface for next-generation quantum networking nodes and high-precision sensing devices. You will build the low-noise, high-precision mixed-signal hardware necessary to control optical sources and read single-photon detectors with the fidelity required for secure quantum communication and entanglement distribution. This is an exciting opportunity to define the hardware architecture that will enable the future of the quantum internet and ultra-secure communications.

Responsibilities: 

• Design and develop low-noise, high-precision mixed-signal circuit boards (DACs/ADCs) to drive optical modulators and laser sources for quantum networking protocols. 
• Engineer ultra-low-noise readout interfaces for single-photon detectors used in Quantum Key Distribution (QKD) and sensing applications.  
• Ensure hardware designs maintain the signal integrity and coherence required to preserve quantum states during transmission and transduction.  
• Collaborate closely with FPGA Engineers to receive timing specifications and deliver signal conditioning specs for synchronization across network nodes. 
• Lead the full hardware lifecycle from schematic capture and PCB layout to simulation, testing, and system integration within a sensing or security testbed.  
• Troubleshoot complex hardware interactions to minimize phase noise and jitter in networking hardware.  
• Mentor junior hardware engineers and drive technical decision-making regarding the physical layer architecture for security products.

You’d be a good fit with:

• Bachelor’s or Master’s degree in Electrical Engineering, Physics, or a related engineering discipline.
• 8+ years of experience (or equivalent) in mixed-signal hardware design and PCB layout.
• Deep expertise in designing low-noise analog circuits and high-precision instrumentation.  
• Proven experience with high-speed ADCs/DACs and signal conditioning chains.  
• Proficiency with EDA tools for schematic capture and PCB layout (e.g., Altium, Cadence).  
• Strong understanding of signal integrity, power integrity, and grounding in sensitive measurement systems.

You’d be a great fit with: 

• Experience designing hardware for low-latency networks, optical communications, or quantum communications.
• Knowledge of precision sensing applications (e.g., magnetometry, atomic clocks).
• Familiarity with FPGA interfacing for high-speed protocol timing.
• Background in controlling fiber-optic components.

Location: This role will work onsite at our offices located in Bothell, WA or Vista, CA.
Travel: Up to 10%
Job ID:  1251

The approximate base salary range for this position is $128,119 - $167,740. The total compensation package includes base, bonus, and equity.

Location: This role is based at our Louisville, CO office with the option to work a few days a week remotely. 
Travel: Up to 5%
Job ID: 1570

The Role

Capella is looking for an energetic Senior Electrical Engineer Manager who will be responsible for leading and managing a team of electrical engineers who design, develop, and test electrical systems and components. This role involves supporting project execution, ensuring compliance with industry standards, and driving innovation of our electrical systems within our satellite.

This role will sit within the Spacecraft Engineering team at Capella Space. This team contains a variety of engineering disciplines that design and develop the satellite and payload systems.

Responsibilities

Leadership and Management:

• Lead, mentor, and develop a team of electrical engineers, providing guidance, support, and performance feedback of a distributed team across two offices.
• Assign people to tasks and manage workloads to ensure timely project completion.
• Foster a collaborative and innovative team environment.

Project Oversight:

• Oversee the design, development, and testing of electrical systems and components for our application.
• Allocate resources effectively to meet project goals and deadlines.
• Support systems engineering requirements.

Technical Expertise:

• Provide technical expertise and guidance on electrical design, integration, and troubleshooting.
• Stay current with industry trends, emerging technologies, and regulatory requirements.
• Drive continuous improvement in electrical engineering practices and processes.

Compliance and Quality Assurance:

• Ensure compliance with aerospace industry standards, including safety, reliability, and regulatory requirements.
• Implement and enforce quality assurance procedures to maintain high standards in all engineering activities.

Qualifications

• Education: Bachelor’s degree in Electrical Engineering; a Master’s degree or higher is preferred.
• Experience: 
• Minimum of 12 years of experience designing, testing, and troubleshooting complex board designs and systems in a hardware R&D lab environment, with 4 years in a managerial or leadership role.
• Proven experience in aerospace systems, or similar high reliability industry, and components is highly desirable.
• Skills: 
• Understanding of hardware evaluation methodologies, including development of test cases/suites, performance analysis, test automation, and data analysis 
• Extensive experience with oscilloscopes, logic analyzers, thermal chambers, and other test equipment 
• Experience with I2C, SPI, PCIe, USB, etc. 
• Experience designing modern analog and digital electronics 
• Experience in PCB schematic capture & layout
• Experience with Altium designer tools or other similar electronic CAD tools 
• Experience designing high reliability systems 
• Knowledge of the PCBA fabrication and assembly process 
• Familiarity with PLM tools and strong revision control practices 
• Excellent design and manufacturing documentation skills with attention to detail 
• Ability to work autonomously by determining and evaluating different courses of action independently 
• Strong technical communication skills to be used in a highly collaborative environment

Required Qualification

To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Capella Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.

Compensation 

The approximate base salary range for this position is $192k - $220k DOE. The total compensation package includes base salary, bonus, equity, and a range of benefits available on our career site. 

About Skyloom 

Skyloom, an IonQ company, is a telecommunications company founded with the mission to develop, deploy, and operate one of the fundamental pieces of tomorrow's space communication infrastructure to provide data transport services on a planetary scale. If you have a strong sense of purpose, focus, urgency, and willingness to compete, or if working on space lasers excites you, join our team to develop the future generation of space communication technology.

Skyloom is building the orbital infrastructure for the next renaissance in global connectivity. As Earth’s first space-based telecommunications company, we deliver fiberless, planetary-scale data transport that dramatically increases bandwidth, availability, and resiliency—while reducing latency and total cost of operations.

Our proprietary optical technology enables secure, ultra-high-capacity connections across our end-to-end, multi-orbit network or within your own infrastructure, unlocking a new standard for global communications.

Location: This role will be onsite in our Broomfield, Colorado office. 
Travel: Up to 5%
Job ID:  1516

The Role

At Skyloom, we’re building cutting-edge optical communication systems for space. We’re looking for an Electrical Engineer with a strong hands-on mindset to help test, debug, and validate electronic assemblies (PCBA and Card Circuit Assembly) across development and production.

This role is ideal for an engineer who enjoys working in the lab, solving real hardware problems, and collaborating across disciplines. Experience with complex electronic systems is key, deep aerospace or space background is a plus, but not required.

You’ll work closely with hardware, firmware, optical, manufacturing, and test teams to bring advanced electronic systems from prototypes to flight-ready production.

Responsibilities: 

Hardware Test & Debug

• Test and debug PCBAs and electronic subsystems, including multi-board systems.
• Perform functional and performance testing during development, qualification, and production.
• Support hardware bring-up and troubleshooting using lab instrumentation.

Validation & Production Support

• Verify electrical and functional requirements.
• Support design verification and production acceptance testing.
• Help identify root causes of failures and support corrective actions.
• Contribute to test procedures, acceptance criteria, and production documentation.

Interfaces & Signal Integrity

• Test and validate common communication interfaces (Ethernet, SPI, I²C, UART, etc.).
• Assist with debugging signal integrity issues in high-speed or mixed-signal designs (e.g., SERDES-based links, LVDS, etc.).

Collaboration

• Work cross-functionally with hardware, firmware, optical, manufacturing and AIT teams.
• Support environmental testing activities (thermal, vibration, etc.) as needed.
• Collaborate with international partners to support system integration and testing.

Requirements: 

• Bachelor’s degree in Electrical Engineering or related field.
• 3-6 years of relevant experience (flexible depending on skill set).
• Solid foundation in electrical engineering fundamentals (digital, analog, or mixed-signal).
• Hands-on experience testing or debugging electronic hardware.
• Comfort working in a lab environment using standard test equipment (oscilloscopes, power supplies, logic analyzers, etc.).
• Experience with PCBAs, prototypes, or production hardware.

Preferred Qualifications: 

• Experience in aerospace, defense, or other regulated industries.
• Exposure to optoelectronics, RF, or communication systems.
• Basic scripting or embedded programming (Python, C/C++ or similar languages).
• Interest in growing into more complex system-level testing or aerospace testing roles.
• Lab environment use, such as, power meter and optic spectrum analyzer. 
• Fluency in Spanish with strong written and verbal communication skills.

Compensation 

The approximate base salary range for this position is $110,000 - $115,000. The total compensation package includes base, bonus, equity, and a range of benefit options found on our career site.   

**Benefits will be provided by Skyloom, Inc., an IonQ Company, and will differ from the benefits listed on the IonQ website.**

About Skyloom 

Skyloom, an IonQ company, is a telecommunications company founded with the mission to develop, deploy, and operate one of the fundamental pieces of tomorrow's space communication infrastructure to provide data transport services on a planetary scale. If you have a strong sense of purpose, focus, urgency, and willingness to compete, or if working on space lasers excites you, join our team to develop the future generation of space communication technology.

Skyloom is building the orbital infrastructure for the next renaissance in global connectivity. As Earth’s first space-based telecommunications company, we deliver fiberless, planetary-scale data transport that dramatically increases bandwidth, availability, and resiliency—while reducing latency and total cost of operations.

Our proprietary optical technology enables secure, ultra-high-capacity connections across our end-to-end, multi-orbit network or within your own infrastructure, unlocking a new standard for global communications.

Location: This role will be onsite in our Broomfield, Colorado office. 
Travel: Up to 5%
Job ID:  1444

The Role

The AIT Mechanical Integration Technician plays a key role in Skyloom’s Assembly, Integration, and Test (AIT) operations. This position is responsible for the hands-on mechanical assembly of flight and non-flight hardware, including precision components, subassemblies, harnesses, and opto-mechanical structures.

Responsibilities 

• Assemble mechanical, electromechanical, and opto-mechanical components following work instructions.
• Identify and organize tools and components based on technical descriptions and BOMs.
• Perform precision inspections using metrology tools to meet aerospace-level specifications.
• Conduct mechanical and functional tests; troubleshoot and perform repairs when required.
• Document test outcomes, deviations, and failure analysis results.
• Collaborate with engineering to implement corrective actions and fixture updates.
• Maintain ESD and FOD controls and follow space-grade cleanliness standards.
• Report deviations in parts, tools, or workflows.
• Support continuous improvement initiatives within AIT.
• Adapt quickly to shifting priorities in a fast-paced environment.

Qualifications

• 1–3 years of experience in mechanical assembly, AIT, electronics, PCB assembly, or high-precision manufacturing.
• Familiarity with precision fasteners and metric hardware.
• Proficiency using basic math for measurements.
• Ability to read and follow detailed work instructions and drawings.
• Effective communication skills in English.
• Ability to comply with safety, ESD, and PPE requirements.
• High school diploma or GED.

Preferred Qualifications

• Experience in aerospace, cleanroom, AIT, or precision assembly environments.
• Familiarity with space hardware or optical components.
• Experience with ERP/MES systems such as Odoo.
• Interest in skill development within a multidisciplinary and international team.

Compensation 

The approximate base salary range for this position is $88,270- $110,000. The total compensation package includes base, bonus, equity, and a range of benefit options found on our career site. 

  **Benefits will be provided by Skyloom, Inc., an IonQ Company, and will differ from the benefits listed on the IonQ website.**

Description:

Architect and develop mission-critical software for a next-generation automated oligo synthesizer, enabling precise control of mechanical, fluidic, and electrical systems. You’ll own the full-stack software infrastructure, from low-level hardware communication (USB/SPI/serial) and embedded firmware integration to GUI design, data analysis tools, and database management — ensuring seamless operation for end-user scientists.

Responsibilities:

Own the Software Development Life Cycle (SDLC) for instrument control software: design, implement, debug, test, and deploy across Java/Python/C++ codebases.

Modernize and refactor legacy systems while ensuring backward compatibility with low level software + embedded firmware (custom PCB controller) and hardware messaging protocols.

Collaborate cross-functionally with engineers, scientists, and IT to translate user feedback into scalable software improvements (UI/UX, performance, reliability).

Develop data analysis pipelines (Python scripts, databases) and real-time monitoring tools for high-speed acquisition and process optimization.

Act as SME for software architecture: document APIs, mentor junior engineers, and align technical decisions with long-term product roadmaps.

Onsite Requirement: This is a fully onsite role due to the hands-on nature of instrument control, hardware integration, and close collaboration with engineering and scientific teams.

Qualifications:

Requires Bachelor’s degree in Computer Science, Computer Science & Engineering, Software Engineering, Electrical Engineering or a related field.

Technical Non-Negotiables: 6–8 years in full-stack software development for instrumentation/robotics/embedded systems.

Expertise in:

Java: core codebase, multi-threaded code and GUI desktop applications (JavaFX or Swing).

Java, Maven, NetBeans IDE and Mercurial.

Python: scripting, data analysis tools.

Low-level comms protocols: USB, Serial, SPI, I2C.

Microcontrollers/embedded firmware (hands-on debugging).

GUI development (e.g., Java FX, Swing, Qt, or other modern frameworks).

Proven leadership in architecting complex systems (design patterns, version control, continuous improvement (CI) / continuous development (CD)).

Soft Skills & Culture Fit:

“Product mindset”: Balance technical rigor with end-user needs (scientists’ workflows).

Communicate complex ideas clearly to both engineers and non-technical stakeholders.

Autonomy: Self-driven in ambiguous, R&D-paced environments.

Benefit:

• Medical Insurance/ Vision Insurance/ Dental Insurance
• 401(k) & Retirement Savings Plan (RSP)
• Short Term Disability Insurance
• New Child Leave
• Paid Time Off
• Paid Company Holidays per year
• Paid Sick Days (earned based on hours worked)
• Compassionate Leave
• Jury Duty Leave
• Float day
• Personal days

Perks: 

• Free colleague meals during shift
• Onsite massages Charis
• Onsite gyms
  
  

Compensation:
Salary range: $150,000 – $170,000 total compensation, including bonus, depending on experience and qualifications.

Description:

Architect and develop mission-critical Java software for next-generation automated instruments, enabling precise control of microcontrollers, valves, sensors, and pressure regulators. Own the full-stack software infrastructure, from low-level hardware communication (USB/SPI/serial) and embedded firmware integration to GUI design, data pipelines, and database management, ensuring reliability for end-user scientists.

Responsibilities:

1. Java-Centric Development:
2. Lead high-level Java development for instrument control, including multi-threaded applications, GUI frameworks (JavaFX/Swing), and hardware abstraction layers.
   • Modernize legacy Java codebases while maintaining backward compatibility with embedded systems (custom controller PCB based on industry standard microcontroller).
3. Hardware Integration:
   • Interface with microcontrollers, sensors, and actuators via protocols (SPI/I2C/serial) and real-time messaging systems.
   • Debug and optimize low-level communication between software and hardware components.
4. Database & Systems Management:
   • Design and maintain relational databases for instrument metadata, experiment logs, and process analytics.
   • Implement data analysis pipelines (Python/Java) for real-time monitoring, post-processing analysis and process optimization.
5. Technical Leadership:
   • Act as SME for software architecture: document APIs, enforce good design practices, and mentor junior engineers if needed.
   • Drive CI/CD pipelines, version control (Mercurial/Git), and automated testing frameworks.

Onsite Requirement: This is a fully onsite role due to the hands-on nature of instrument control, hardware integration, and close collaboration with engineering and scientific teams.

Qualifications:

Requires Bachelor’s degree in Computer Science, Computer Science & Engineering, Software Engineering, Electrical Engineering or a related Engineering field.

Experience: 6–8 years in Java development for instrumentation/robotics/embedded systems (or equivalent).

Technical Skills:

Java Expertise: Core Java, multi-threading, JavaFX/Swing, Maven, NetBeans.

Hardware Protocols: USB, Serial, SPI, I2C (hands-on debugging).

Bonus: Python scripting, Qt/GUI frameworks, embedded firmware (C/C++).

Soft Skills & Culture Fit:

“Product mindset”: Balance technical rigor with end-user needs (scientists’ workflows).

Communicate complex ideas clearly to both engineers and non-technical stakeholders.

Autonomy: Self-driven in ambiguous, R&D-paced environments.

Benefit:

• Medical Insurance/ Vision Insurance/ Dental Insurance
• 401(k) & Retirement Savings Plan (RSP)
• Short Term Disability Insurance
• New Child Leave
• Paid Time Off
• Paid Company Holidays per year
• Paid Sick Days (earned based on hours worked)
• Compassionate Leave
• Jury Duty Leave
• Float day
• Personal days

Perks: 

• Free colleague meals during shift
• Onsite massages Charis
• Onsite gyms

Compensation:
Salary range: $140,000 – $170,000 total compensation, including bonus, depending on experience and qualifications.

ABOUT THE TEAM

Anduril’s Tactical Recon & Strike (TRS) is a division with two missions: 1) build highly capable autonomous drones, and 2) build solid rocket motors at scale. We transform products like Ghost, Anvil, Bolt, and Altius from early concepts into fully operational capabilities by partnering closely with specialist engineering, operations, and production teams. Through our Anduril Rocket Motor Systems (RMS) team, we design and manufacture solid rocket motors using advanced materials, proprietary formulations, and high-volume production methods—delivering safe, reliable propulsion systems that support a wide range of mission requirements. TRS hires software engineers & hardware engineers, who are excited to build across a diverse and powerful portfolio—from autonomous aerial systems to high-performance solid rocket motors. Our teams contribute to highly capable autonomous robotics systems and propulsion products that operate reliably in the most demanding mission environment.

ABOUT THE JOB

As an Electrical Engineering Manager, you will lead the design and development of safety-critical circuitry for Ignition Safety Devices (ISD) and Electronic Safe and Arm Devices (ESAD). You will be responsible for specifying and testing ISDs and ESADs, including environmental testing. In addition to your technical tasks, you will provide leadership to ISD and ESAD programs throughout their lifecycle, from concept to production. The ideal candidate has hands-on experience with the development of ISDs, ESADs, and related devices, deep technical understanding of their design and production, and excellent management skills. If you are a hands-on leader, have an entrepreneurial spirit, and enjoy being the point person for getting a project across the finish line, then this role is for you.

WHAT YOU'LL DO

• Design & Integration: Lead the design and development of embedded control electronics from concept to production—including hardware selection, schematic & PCB design, board bring-up, and system integration.
• Hands-On Engineering: Actively participate in the design and troubleshooting of high voltage circuitry (up to 2kV) and power management systems.
• Program Support & Planning: Drive ISD and ESAD programs from concept to production by contributing to program planning and execution.
• Customer Interaction: Conduct design reviews with customers and incorporate their feedback into the development process.
• Team Leadership: Manage day-to-day interdisciplinary technical teams while handling multiple projects concurrently.
• Troubleshooting Expertise: Diagnose and resolve issues crossing electrical and software disciplines using lab equipment (oscilloscopes, DMMs) and software debugging tools.
• Fast-Paced Environment: Thrive in a dynamic setting supporting new developments, active deployments, and customer-operated hardware.
• Systems Engineering: Execute systems engineering functions for ISDs and ESADs, collaborating with peers and cross-discipline teams.
• Continuous Improvement: Implement best practices and drive continuous improvement efforts in design and production processes.

REQUIRED QUALIFICATIONS

• Bachelor’s in Electrical or Computer Engineering (or equivalent).
• 8+ years of experience developing ruggedized electrical hardware.
• Experience leading a team of engineers.
• Technical expertise in high voltage circuitry design (up to 2kV), power management and supply design, and proficient with Altium Designer (or equivalent).
• Test & Troubleshooting: Experienced in using oscilloscopes, logic analyzers, debuggers, current probes, and test automation.
• Communication & Organization: Exceptional written, oral, and interpersonal skills.
• Willing to travel for customer, safety board, and test reviews; thrives in fast-paced environments.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

PREFERRED QUALIFICATIONS

• Hands-on experience with the design and development of safety-critical systems.
• Experience specifically with ISDs and/or ESADs.
• Familiarity with software development processes and tools such as git, Github, JIRA, etc.
• Experience with developing for a safety-critical environment.
• Experience working on products used in tough environments (automotive, aerospace, defense, etc.).
• Proficiency with C
• Knowledge of embedded software development, including use of timers, interrupts, hardware peripherals such as SPI controllers and ADCs

Role Overview

SirenOpt is looking for a Staff Electrical Engineer – High Voltage Systems to help architect, design, and validate the high-voltage electrical systems behind our next-generation metrology platform.

This is a hands-on, high-impact role for someone who enjoys working close to the technology, solving hard problems quickly, and helping shape products in an early-stage startup environment.

This role is ideal for an engineer who is energized by deep tech, thrives in cross-functional environments, and is motivated by the opportunity to build something genuinely new.

You will work closely with a small, highly capable team to turn advanced plasma science into robust, manufacturable, field-ready systems.

What You’ll Do

• Lead and contribute to the electrical design and validation of SirenOpt’s plasma-based metrology systems.
• Design high-voltage and mixed-signal electronics from concept through schematic capture, layout guidance, bring-up, debug, testing, and integration.
• Collaborate with mechanical, systems, software, algorithm, and project engineers to develop reliable and scalable products.
• Research and evaluate new concepts, components, and architectures for advanced low-temperature plasma instrumentation.
• Work closely with customers and internal stakeholders to refine designs based on real-world use, integration needs, and product feedback.
• Create and maintain core technical documentation, including requirements, schematics, wiring diagrams, validation plans, and test reports.
• Help translate frontier R&D into practical hardware that can perform in demanding industrial environments.

What We’re Looking For

• B.S., M.S., or PhD in Electrical Engineering or a related field, with 5+ years of relevant industry experience.
• Strong experience in high-voltage PCB design, ideally above 5 kV.
• Hands-on experience across the full PCB development cycle, including concept, schematics, layout, manufacturing support, bring-up, testing, and HW/SW integration.
• Experience with mixed-signal designs that combine analog, digital, and high-voltage circuitry.
• Familiarity with DfX practices such as DFM and DFT, along with structured engineering review processes.
• Ability to work effectively in a fast-moving, multidisciplinary environment with a high degree of ownership.
• Strong communication skills and a practical, problem-solving mindset.

Nice to Have

• Experience in electron optics, electron beam systems, plasma systems, or similar high-voltage applications.
• Familiarity with CE, UL, or other regulatory compliance frameworks.
• Experience with high-precision industrial systems used in metrology, automation, or advanced material processing.
• Exposure to metrology sensors or instrumentation for advanced materials.

Why Join SirenOpt

• Help define a new category in advanced materials metrology.
• Work on genuinely novel deep-tech hardware with real scientific and industrial impact.
• Join an early-stage team where your decisions directly shape the product, technology, and company.
• Build systems at the intersection of plasma science, electronics, sensing, and AI-driven analytics.
• Contribute to technology that can expand what researchers and industry teams are able to see, measure, and optimize.

Role Overview

SirenOpt is looking for a Staff Electrical Engineer – FPGA / MPSoC & Digital Signal Processing Systems to lead the architecture, design, implementation, and validation of high-performance programmable logic, embedded processing, and FPGA-based digital signal processing systems powering our next-generation metrology platform.

This is a hands-on, high-impact role for someone who enjoys working close to the technology, solving hard problems quickly, and helping shape products in an early-stage startup environment.

This role is ideal for an engineer who is energized by deep tech, thrives in cross-functional environments, and is motivated by the opportunity to build something genuinely new.

You will work closely with a small, highly capable team to turn advanced sensing, digital signal processing, and control concepts into robust, high-performance, field-ready systems.

What You’ll Do

• Lead the architecture, design, implementation, and validation of FPGA, MPSoC, and FPGA-based digital signal processing systems for SirenOpt’s metrology platform.
• Develop designs from concept through architecture definition, RTL development, modeling, simulation, verification, testbench development, bench testing, and system bring-up.
• Build and maintain robust simulation and verification environments to validate functionality, timing, performance, and reliability at both block and system levels.
• Design and implement FPGA-based digital signal processing pipelines for real-time sensing and metrology applications, including FIR filters, synchronization pipelines, control loops, and low-latency data paths.
• Implement, evaluate, and refine signal-processing and control algorithms such as PID, ADPLL, filtering, and signal-conditioning methods for high-performance measurement systems.
• Use MATLAB and Python for algorithm development, modeling, data analysis, system validation, and signal and electrical data characterization.
• Perform large-scale data analysis to evaluate signal quality, characterize system behavior, and guide design tradeoffs and performance optimization.
• Collaborate closely with hardware, electrical, software, algorithm, and systems engineers to support end-to-end FPGA, MPSoC, firmware, and hardware integration.
• Read and interpret schematics to understand board-level architecture, interfaces, signal paths, power domains, and subsystem dependencies.
• Bring up new boards in the lab, troubleshoot issues independently, and debug hardware/firmware interactions using oscilloscopes, logic analyzers, signal generators, power supplies, and related lab equipment.
• Help translate frontier R&D concepts into scalable, reliable, and manufacturable digital systems.

What We’re Looking For

• B.S., M.S., or PhD in Electrical Engineering, Computer Engineering, or a related field, with 5+ years of relevant industry experience.
• Strong experience with end-to-end FPGA and MPSoC design, including architecture, RTL development, simulation, synthesis, timing closure, verification, and board bring-up.
• Advanced experience with FPGA-based digital signal processing for real-time systems, including FIR filters, synchronization methods, streaming pipelines, and control-oriented digital design.
• Strong experience with algorithm modeling and analysis using MATLAB and Python.
• Experience implementing and validating signal-processing and control techniques such as PID, ADPLL, filtering, and signal characterization workflows.
• Strong command of HDL/RTL implementation for digital signal processing, control, and high-performance data-path design.
• Hands-on experience developing testbenches, verification environments, and bench-level validation workflows.
• Strong understanding of firmware/hardware integration and system-level debugging in tightly coupled digital platforms.
• Ability to read and understand electrical schematics and work effectively at the board and subsystem level.
• Proven experience troubleshooting and bringing up hardware in the lab using standard electrical test equipment.
• Experience working in a fast-moving, multidisciplinary environment with a high degree of ownership and technical independence.
• Strong communication skills and a practical, problem-solving mindset.

Nice to Have

• Experience providing technical leadership for hardware and firmware engineering teams in complex product development environments.
• Experience with image processing or vision-related algorithm pipelines.
• PCB design experience, including familiarity with board-level layout considerations and signal integrity tradeoffs.
• Experience with high-speed interfaces, instrumentation systems, or real-time sensing platforms.
• Familiarity with mixed-signal systems and integration with ADCs, DACs, sensors, and embedded processors.
• Exposure to metrology systems, scientific instrumentation, or advanced materials applications.

Why Join SirenOpt

• Help define a new category in advanced materials metrology.
• Work on genuinely novel deep-tech hardware with real scientific and industrial impact.
• Join an early-stage team where your decisions directly shape the product, technology, and company.
• Build systems at the intersection of plasma science, electronics, sensing, AI-driven analytics, programmable logic, and advanced digital signal processing.
• Contribute to technology that can expand what researchers and industry teams are able to see, measure, and optimize.

Senior Electrical Engineering Technician

Position Summary

The Senior Electrical Engineering Technician provides advanced technical support to the electrical engineering team in the design, development, testing, and maintenance of electrical and electronic systems. This role involves complex troubleshooting, prototype development/EDVT, system integration, and mentoring junior technicians. The Senior EE Technician ensures engineering projects meet technical specifications, quality standards, and project timelines.

Key Responsibilities

· Support electrical engineers in the design, development, and validation of electrical and electronic systems.

· Build, modify and debug prototypes, wiring harnesses, and circuit boards.

· Perform diagnostics and troubleshooting on electrical and electronic equipment and systems.

· Develop and maintain test setups, automated test systems, and validation procedures.

· Conduct electrical testing and data analysis using lab instruments such as oscilloscopes, spectrum analyzers, power supplies, and data acquisition systems.

· Review schematics, wiring diagrams, and engineering drawings to ensure proper implementation.

· Document test procedures, engineering changes, and technical findings.

· Partner with mechanical engineering, manufacturing, and quality teams to support product development.

· Mentor junior technicians and help drive best practices in the lab.

Required Qualifications

· Associate degree or technical diploma in Electrical Engineering Technology, Electronics Technology, or related field (Bachelor’s degree preferred).

· 5+ years of hands-on experience in electrical or electronics engineering support roles.

· Strong knowledge of electrical circuits, analog and digital electronics, and electronic components.

· Proficiency in reading and interpreting schematics, wiring diagrams, and technical documentation.

· Experience using electronic test equipment such as oscilloscopes, multimeters, function generators, and logic analyzers.

· Excellent troubleshooting and root-cause analysis skills.

· Strong documentation, communication, and teamwork abilities.

Preferred Skills

· PCB assembly, soldering, and rework, including surface-mount components.

· Experience with CAD or schematic tools (Altium, KiCad, AutoCAD Electrical).

· Familiarity with embedded systems or microcontrollers.

· Exposure to automated testing, data acquisition systems, or Python-based test scripting.

Work Period: July 2026 to December 2026

Location & Schedule: This is a full-time, 40-hour-per-week position with 5 days per week onsite in Needham, MA.  There is no relocation or housing assistance for this position.

Join the SharkNinja Early Edge Experience: Built for early career talent. Geared toward impact. Driven by speed. Whether you're in a co-op or internship, our early talent program is designed to provide valuable exposure to the industry and a fast-paced professional environment. You’ll dive into meaningful projects and tasks that sharpen your skills and deepen your knowledge. Along the way, you’ll benefit from professional development opportunities, community events, and connections that make your experience well-rounded and enriching. Your time with us will culminate in an opportunity to showcase your contributions and learnings to SharkNinja leaders because this is a program for those ready to shape what’s next — fast.

This role: As a key member of the Shark Electrical Engineering team, you’ll play a hands-on role in supporting the development and testing of next-generation Shark products. From circuit-level troubleshooting to lab-based validation and verification, you’ll work alongside experienced engineers to refine electrical systems, test new components, and ensure our products meet the highest standards of performance and reliability. Your work will directly contribute to turning bold ideas into trusted tools for consumers around the world. If you're technically curious, solution-oriented, and ready to make an impact from day one, we want to hear from you!

 Here are some of the EXCITING things you’ll get to do:

• Contribute to the development of cutting-edge technologies that will power the next generation of Shark products
• Support senior engineers in designing and testing analog and digital circuits, including low-noise analog systems, microprocessors, A/D and D/A converters, and power supply architectures
• Assist with board bring-up, debugging, and validation of real-time embedded electronics
• Help develop and refine microprocessor-based control and communication platforms through simulation, analysis, prototyping, and hands-on lab testing
• Collaborate on cross-functional problem-solving to support released products and conduct failure analysis for field-reported issues
• Participate in technical reviews and contribute to design documentation, test plans, and technical reports
• Work closely with Mechanical Engineering, Marketing, and Product Testing teams to ensure electrical solutions align with product goals and user expectations
• Gain hands-on experience with real products, real challenges, and real impact in a fast-paced innovation environment

 ATTRIBUTES & SKILLS:

• Education: Must be currently enrolled in a bachelor’s, master’s, or doctoral program, or have graduated within the past year
• Must be an electrical engineering major
• Must be able to work a full-time, 40-hour-per-week schedule with 5 days per week onsite in Needham, MA
• Strong understanding of Bipolar and CMOS technologies; foundational knowledge in power electronics is preferred
• Able to quickly develop visual and physical representations of product functions and electrical layouts
• Combines creativity with technical expertise to generate innovative, real-world solutions
• Experience with electrical design tools such as LTSpice; familiarity with PCB design software like Altium is a plus
• Exposure to product-level testing including DC/AC performance, power consumption, BLDC motors, and EMC considerations is a bonus
• Prior internship or project experience in consumer electronics or small appliances is a strong asset
• Hands-on lab experience with test equipment (oscilloscopes, function generators, power supplies, SMUs); surface mount soldering skills are a plus
• Proficient in Microsoft 365; experience with Visual Basic programming is a plus
• Embodies SharkNinja's success drivers:
  • Rarely Satisfied – Adopt a “no delays” mentality in delivering against market needs/timing
  • Progress over Perfection - Make quick, daily progress and continuously adapts to achieve results rather than requiring perfect planning
  • Details Make the Difference - Can coordinate timelines & deliverables to ensure accuracy and consistency across all consumer-facing materials
  • Winning is a Team Sport - Ability to develop strong cross-functional relationships
  • Communicate for Impact - Strong communication skills - ability to deliver effective presentations to all levels of management

Please note that, due to the high volume of applications for early talent roles, response times may vary depending on the specific role and timeline. Our team appreciates your patience!

Principal Electrical Engineer 

Overview 

We are seeking a highly experienced Principal Engineer, Electrical Engineering to serve as a technical leader within our electronics organization. This role is ideal for a hands-on expert who leads through influence, deep expertise, and ownership of complex systems 

You will play a critical role in shaping electrical and embedded system architecture, driving engineering excellence, and guiding cross-functional teams to deliver innovative consumer products from concept through high-volume production. This position requires a strong voice in technical decision-making, the ability to mentor informally, and a passion for building robust, scalable designs. 

Key Responsibilities (Technical Leadership) 

• Own and drive system-level architecture for electrical and embedded designs across multiple product programs.  

• Act as a technical authority in power electronics and embedded systems, guiding design decisions and trade-offs.  

• Lead by influence across cross-functional teams (ME, ID, Product, Manufacturing), ensuring alignment and strong execution.  

• Drive engineering rigor and best practices in schematic design, PCB layout, firmware integration, and validation.  

• Lead design reviews and technical deep dives, challenging assumptions and raising the bar for quality and innovation.  

• Provide mentorship and guidance to engineers through collaboration, design reviews, and technical coaching.  

• Identify risks early and drive resolution, ensuring product performance, reliability, and compliance.  
• Champion DFM/DFT and scalable design principles, working closely with manufacturing and suppliers.  

Technical & Program Responsibilities 

• Design and develop consumer product electronics from concept through production and sustaining support.  

• Contribute directly through schematic capture and PCB design oversight  

• Support DVT (design verification testing), EMC, and regulatory compliance (UL, FCC, CE, IEC).  

• Collaborate with Product Marketing and cross-functional teams to translate requirements into robust technical solutions.  

• Lead prototype development, testing, and validation, including interpretation of results and design iteration.  

• Support field issue investigation and root cause analysis, driving continuous product improvement.  
• Partner with suppliers and contract manufacturers to ensure high-quality, cost-effective implementations.  

What We’re Looking For 

• 10+ years of experience in electrical engineering with a strong track record at the senior/principal level  

• Deep expertise in power electronics (AC/DC, motor control, thermal systems) and embedded systems design.  

• Strong experience in analog and digital design, including schematic capture and PCB layout 

• Proven ability to lead complex programs through influence, not authority.  

• Experience delivering high-volume consumer products from concept to production.  

• Strong understanding of DFM, DFT, and regulatory compliance.  
• Excellent problem-solving and communication skills, with the ability to drive clarity across teams.  

How You Lead 

• Set the technical bar for the organization through your work and decision-making  

• Influence outcomes across teams through credibility and expertise  

• Mentor by doing, elevating others through collaboration and feedback  

• Drive alignment in ambiguity, helping teams converge on the right solutions  
• Own critical decisions and outcomes, ensuring successful product delivery  

This role is perfect for someone who wants to stay deeply hands-on while operating at a leadership level, shaping products, influencing teams, and driving engineering excellence. 

Innovators Wanted – Join Our Extraordinary Electrical Engineering Talent Community!

At SharkNinja, we are always seeking world-class engineering talent eager to push the boundaries of product design innovation. Whether you are a technical leader, a complex problem solver, or an engineer driven by curiosity and hands-on experimentation, we want to hear from you!

This role will focus on team management and embedded electronic design and product development for our ambitious product roadmap of vacuum & cleaning products. The successful candidate will have experience in analog and digital embedded design, including both hardware (schematic capture and PCB layout) and firmware (C and ASM), preferably in consumer products or similar. This team member will participate in ideas on how to best use electronics to comply with marketing and engineering requirements and support overall development from conceptualization to implementation of new products. This engineer will be directly involved in the design and building of prototypes that will drive new products to expand and improve our costumer experience with Shark brand products.
 
Duties & Responsibilities:

Design analog and digital circuits including low noise analog circuits, A/D and D/A converters, microprocessors, communication interfaces, linear and switched-mode power supplies.
Perform design, debugging, and board bring-up of analog and digital real-time embedded electronics for microprocess-based control and communication hardware platform using combination of simulation, analysis, prototyping and testing.
Perform design, debugging, and board bring-up of analog and digital real-time embedded electronics for microprocess-based control and communication hardware platform using combination of simulation, analysis, prototyping and testing.
Contribute to project work directly through architecture, schematics and software design while supporting DVT, DQTP, EMC and compliance testing.
Collaborate with other engineering disciplines and Product Marketing to provide initial cost estimates for EBOM, as well as final product implementation based upon thorough analysis of product requirements.
Design and development of consumer product electronics from initial concept to on-going product support within our global development organization.
Support fielded products and perform analysis of field-reported issues

Functional Skills & Knowledge:

 Ability to work in a fast paced, deadline-driven environment
Ability to work independently and in a team demonstrating initiative with minimal guidance
Excellent communication skills (verbal and written) along with good sound interpersonal skill

Education & Experience:

BS in Electrical Engineering and 5+ years related experience, or advanced degree and 3+ years related experience Previous industry experience working for a consumer products company or a consultant company in the consumer goods space is highly desirable.
Experience in all aspects of electrical design: component selection, system architecture, documentation, test and debugging

#LI-LS1

Work Period: July 2026 to December 2026

Location & Schedule: This is a full-time, 40-hour-per-week position with 5 days per week onsite in Needham, MA.  There is no relocation or housing assistance for this position.

Join the SharkNinja Early Edge Experience: Built for early career talent. Geared toward impact. Driven by speed. Whether you're in a co-op or internship, our early talent program is designed to provide valuable exposure to the industry and a fast-paced professional environment. You’ll dive into meaningful projects and tasks that sharpen your skills and deepen your knowledge. Along the way, you’ll benefit from professional development opportunities, community events, and connections that make your experience well-rounded and enriching. Your time with us will culminate in an opportunity to showcase your contributions and learnings to SharkNinja leaders because this is a program for those ready to shape what’s next — fast.

This role: As a key member of the Ninja Electrical Engineering team, you’ll play a hands-on role in supporting the development and testing of next-generation Ninja products. From circuit-level troubleshooting to lab-based validation and verification, you’ll work alongside experienced engineers to refine electrical systems, test new components, and ensure our products meet the highest standards of performance and reliability. Your work will directly contribute to turning bold ideas into trusted tools for consumers around the world. If you're technically curious, solution-oriented, and ready to make an impact from day one, we want to hear from you!

 Here are some of the EXCITING things you’ll get to do:

• Contribute to the development of cutting-edge technologies that will power the next generation of Ninja products
• Support senior engineers in designing and testing analog and digital circuits, including low-noise analog systems, microprocessors, A/D and D/A converters, and power supply architectures
• Assist with board bring-up, debugging, and validation of real-time embedded electronics
• Help develop and refine microprocessor-based control and communication platforms through simulation, analysis, prototyping, and hands-on lab testing
• Collaborate on cross-functional problem-solving to support released products and conduct failure analysis for field-reported issues
• Participate in technical reviews and contribute to design documentation, test plans, and technical reports
• Work closely with Mechanical Engineering, Marketing, and Product Testing teams to ensure electrical solutions align with product goals and user expectations
• Gain hands-on experience with real products, real challenges, and real impact in a fast-paced innovation environment

 ATTRIBUTES & SKILLS:

• Education: Must be currently enrolled in a bachelor’s, master’s, or doctoral program, or have graduated within the past year
• Must be an electrical engineering major
• Must be able to work a full-time, 40-hour-per-week schedule with 5 days per week onsite in Needham, MA
• Strong understanding of Bipolar and CMOS technologies; foundational knowledge in power electronics is preferred
• Able to quickly develop visual and physical representations of product functions and electrical layouts
• Combines creativity with technical expertise to generate innovative, real-world solutions
• Experience with electrical design tools such as LTSpice; familiarity with PCB design software like Altium is a plus
• Exposure to product-level testing including DC/AC performance, power consumption, BLDC motors, and EMC considerations is a bonus
• Prior internship or project experience in consumer electronics or small appliances is a strong asset
• Hands-on lab experience with test equipment (oscilloscopes, function generators, power supplies, SMUs); surface mount soldering skills are a plus
• Proficient in Microsoft 365; experience with Visual Basic programming is a plus
• Embodies SharkNinja's success drivers:
  • Rarely Satisfied – Adopt a “no delays” mentality in delivering against market needs/timing
  • Progress over Perfection - Make quick, daily progress and continuously adapts to achieve results rather than requiring perfect planning
  • Details Make the Difference - Can coordinate timelines & deliverables to ensure accuracy and consistency across all consumer-facing materials
  • Winning is a Team Sport - Ability to develop strong cross-functional relationships
  • Communicate for Impact - Strong communication skills - ability to deliver effective presentations to all levels of management

Please note that, due to the high volume of applications for early talent roles, response times may vary depending on the specific role and timeline. Our team appreciates your patience!

At SharkNinja, our purpose is to positively impact people’s lives every day in every home around the world. We work very hard to provide our consumers with high quality, exciting 5-star products that make life easier. We thrive on passion and innovation, and are looking for great people, with great ideas, who want to create the next big thing and develop as they do.  We take a team approach to our projects, where everyone has a voice. SharkNinja recognize the importance of diversity in the workplace and are committed to hiring a diverse team. 

Summary of Position 

This role is for an individual contributor and will focus on technical leadership of embedded electronic design and product development lifecycle for our product roadmap. The successful candidate will have experience in analog and digital embedded design, including both hardware (schematic capture and PCB layout) and firmware (C and ASM), preferably in consumer products or similar. The role would need to collaborate with cross-functional teams to define the product electrical and firmware architecture, work with contract manufacturers and global electrical engineering team to implement the designs while conducting the timely reviews with broader team and monitoring the progress.  Role requires familiarity with all product development aspects such as team task tracking, BOM cost tracking, DFMEA, documentation and PLM systems. 

Role Functions: 

• Oversee the design and development of consumer products from initial concept to production within our global EE organization
• Day-to-day coordination of team tasks to enable the delivery of functional prototypes for research and internal review
• Collaborate with Engineering and Product Marketing teams to provide initial cost estimates for EBOM and work effort to support advanced development and prototype needs, as well as final product implementation based upon thorough review of product requirements
• Define product electrical and firmware architecture as an input for the contract manufacturers and global teams
• Work with compliance team and ensure that the product meets global certification standards for consumer electronics
• Ensure the development of clear and concise firmware and hardware specifications/ documentation and solutions to meet product requirements
• Interact with team members from other disciplines to complete project deliverables, solve problems
• Work with global EE leadership to report the project status, review, meet and update the organizational objectives
• Be able to lead and mentor junior engineers and technologists. 

Requirements  

• BS or MS in Electrical Engineering (or equivalent) 
• Minimum of 5+ years’ experience in a technical leadership role involving the design, development and delivery of embedded hardware and firmware projects
• Experience in aspects of electrical design: component selection, system architecture, design verification and documentation
• Experience of delivering products while meeting Design for Manufacturability, testability and reliability guidelines.
• Experience in the development of embedded firmware of microcontrollers, including design, test and debugging.
• Experience of resolving compliance testing and EMI/EMC issue through methodical RCA.
• Ability to work with ambiguous requirements and the ability to “find order in chaos”.
• Ability to work in a fast paced, deadline-driven environment
• Ability to work with minimal supervision or guidance  
• A broad view and understanding of the product development process, and effective experience leading multi-disciplined team efforts in the evolution of products from concept through testing, verification and approval
• Solid analytical skills with a strong attention to detail
• Excellent communication skills (verbal and written) along with good sound interpersonal skills 

Desirable:

• Familiarity with compilers, IDE’s, JIRA, SVN is a plus
•  Previous industry experience working for a consumer product company or a consultant company in the consumer goods space is highly desirable.

Vast is looking for an Electrical Engineer, Crew Avionics, reporting to the Manager of Human Interface Avionics, to support the development of the systems that will be required for the design and build of artificial-gravity human-rated space stations. 

This will be a full-time, exempt position located in our Long Beach location. 

Responsibilities: 

• Own hardware from “cradle to grave”, coordinating with other teams to rapidly iterate on and deliver quality avionics products. You will own your hardware products in both success and in failure, though in the case of the latter you can expect support and resources rather than reprimand.
• Translate high-level operational requirements into detailed electrical specifications and design documents.
• Perform trade studies and analyses to select optimal components, technologies, and design approaches.
• Ensure that development and testing is carried out in a safe and controlled manner, prioritizing the safety of employees and the astronaut crew above all else. 
• Design and develop complex multi-layer printed circuit boards (PCBs) for flight hardware, adhering to rigorous space-grade standards.
• Schematic capture, component selection, and layout for high-reliability boards in a punishing space environment.
• Work with the PCB layout design team to help with the layout phase of design, and occasionally step up and layout a coupon or even flight PCB yourself 
• Perform signal integrity, power integrity, and EMI/EMC analysis to ensure robust designs.
• Analysis & Simulation:
• Conduct circuit analysis, worst-case analysis, fault tolerance analysis, and derating analysis.
• Utilize simulation tools (e.g., SPICE, MATLAB/Simulink) for design verification and optimization.
• Test & Verification:
• Develop and execute comprehensive test plans for PCBs and integrated systems.
• Troubleshoot and debug hardware, identify root causes, and implement corrective actions.
• Support environmental testing (vibration, shock, thermal vacuum, radiation, EMC) and flight qualification campaigns.
• Documentation & Review:
• Generate clear and concise design documentation, test procedures, and reports.
• Participate in design reviews and provide technical guidance to junior engineers.
• Participate in design reviews for peer’s PCB designs.
• Collaboration:
• Work closely with cross-functional teams including software, mechanical, systems engineering, manufacturing, test, and operations to ensure seamless cooperation on bringing the design to its final integration, flight, and decommissioning. 
• Communicate technical information effectively to both technical and non-technical stakeholders.

Minimum Qualifications:

• Bachelor’s degree in Electrical Engineering or a related field.
• Some experience in electrical engineering, with a focus on system and PCB design.

Preferred Skills & Experience:

• Proficiency in schematic capture and PCB layout tools (e.g., Altium Designer, Cadence Allegro, KiCad).
• Experience with analog and digital circuit design, microcontrollers, FPGAs, and communication interfaces (e.g., I2C, SPI, Ethernet, RS-422).
• Understanding of signal integrity, power integrity, and EMI/EMC principles.
• Experience with simulation tools (eg. SPICE) to evaluate design decisions and de-risk new circuit designs before spending the money on hardware. 
• Experience with hardware testing, troubleshooting, and debugging.
• Familiarity with audio electronics (speakers/microphones/amplifiers
• Experience with high-reliability/fault-tolerant electronics for aerospace or defense applications.
• Familiarity with space-grade components and radiation effects.
• Experience with human-machine interface (HMI) design principles.
• Experience designing audio systems - whether professionally or for your home movie theater!
• Experience designing lighting systems - whether professionally or for your spooky Halloween LED display!
• Familiarity with complex system architectures.
• Experience with environmental testing for flight hardware.
• Proficiency in scripting languages (e.g., Python) for automation and data analysis.
• Hands-on engineering - equal willingness to work at your desktop computer, with a soldering iron in the lab, and with a broom to clean up afterwards. 
• Ability to work effectively in a fast-paced, dynamic, and team-oriented environment.
• Excellent problem-solving and communication skills.
• Ability to independently but also collaboratively as a teammate to achieve ambitious goals.
• Willing to make mistakes, take responsibilities, work independently and be transparent about your work

Additional Requirements:

• Able to lift 25 lbs unassisted.
• Willingness to work evenings and/or weekends to support critical mission milestones.

Pay Range: 

• Electrical Design Engineer I: $103,000
• Electrical Design Engineer II: $112,340 - $159,468
• Senior Electrical Design Engineer: $137,760 - $195,552

ABOUT THE TEAM

Anduril’s Air and Ground Deterrence (AGD) Division develops integrated robotic systems designed to provide multi-domain situational awareness and force protection across land, sea, and air. From detection to tracking, identification, deterrence, and defeat, our family of networked sensors and effectors enables our customers to rapidly detect and identify potential threats. close the kill chain against a broad range of Unmanned Aerial System (UAS) threats.

Working across product, engineering, sales, logistics, operations, and mission success, the multidisciplinary Sentry Hardware team with AGD serves as the key system integrator of the Anduril Sentry Family of Systems (FoS). In particular, the Sentry Electrical Engineering Team drives end-to-end development, from electrical architecture and ruggedized hardware design to verification, integration, and test, ensuring scalable, production and mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and other key stakeholders.

ABOUT THE JOB

The Sentry Engineering team builds hardware products and systems that leverage artificial intelligence to provide highly accurate, persistent autonomous awareness across land, sea and air. With an AI-enabled edge processing, continuous 360 pan / tilt capability, and a variety of radars and sensors, Sentry can autonomously identify, detect, and track objects of interest to bring increased awareness to borders, military bases, oil and gas pipelines, airports and other critical infrastructure.

We are looking for an Electrical Sustainment Engineer to join our rapidly growing team in Irvine, CA. This role will own rapidly developed, ruggedized electronics design in addition to scaling legacy design concepts to support full-rate production. In this role, you will partner with our Architecture and Product Management team to help drive system requirements prior to owning full PCB and/or electrical system design. This will require identifying high risk areas, creating and validating electronics designs for embedded compute and/or power systems, and testing for long term-reliability while considering manufacturability and testability in the design.

If you are someone who enjoys designing mission-critical electrical circuit cards and integrated systems with the freedom to drive product development from often undefined requirements then this role is for you.

WHAT YOU’LL DO

• Take ownership as the main point of contact for electrical integration activities.
• Provide hands on and in-field support of prototype and production level product.
• Collaborate with mechanical engineers to optimize selection, design and integration of high power components, modules and distribution.
• Trade-off component and module selections against size, weight, power and EMC requirements.
• Collaborate with design team to achieve reliability goals at a system level in context of concepts of operation.

REQUIRED QUALIFICATIONS

• Self starter with the ability to design digital & analog electronics from concept and functional prototype, to production ready product.
• Ability to troubleshoot existing hardware to find root cause of issues and implement improvements to improve the design.
• Develop clear documentation to capture design requirements, specifications, test coverage, and test reports.
• Complete full cycle PCB design including collecting requirements, schematic design, component selection, completion of layout, bring-up, test, debug, validation, characterization, and integration with the system.
• Work closely with other mechanical, software, firmware, and test engineers to deliver fully functional products.
• Work in a fast-paced environment supporting new developments, active deployments, and customer operated hardware.
• Concurrently manage involvement in multiple projects at various stages.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

PREFERRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 4+ years of experience designing, testing and troubleshooting complex board designs and products.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with switch mode power supply design and testing.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Exceptional organization and communication skills (both written and oral).
• Proficient with Altium Designer or equivalent electronic design automation design tools.
• Proficiency with scripting languages (Python, Matlab, etc.)
• Ability to root cause Full stack HLOS application to hardware component level issues.

ABOUT THE TEAM 

Anduril Intelligence Systems (AIS) is focused on positioning Anduril as a lead provider of specialized engineering and products for Intelligence Community (IC) customers. We work within the IC to understand their requirements, shape their concepts of operation, and deliver exquisite capability across their problem set. We aim to develop and deploy critically needed capabilities that address our customers’ most pressing national security requirements.

ABOUT THE JOB

We are looking for an Electrical Engineer to join our rapidly growing team in Reston, Virginia. In this role you will be responsible for designing, developing, augmenting, adapting, troubleshooting, and managing fabrication of printed circuit boards (PCB) through to working electronic devices. The PCB designs you support will be complex, multilayer printed circuit boards that meet rigorous performance and reliability standards. You will collaborate closely with cross-functional teams, including AIS and program leadership, project managers, electrical & mechanical engineers, software engineers, vendors, suppliers, and manufacturers to develop and deliver innovative solutions and ensure seamless integration of completed electronics, firmware, and application software into final deliverable products. This position will require the ability to work on both existing and new designs, troubleshoot and reverse engineer existing PCB designs, and have a strong understanding of the manufacturing process. You will need to work within tight timelines and resource constraints.

WHAT YOU’LL DO 

• Work directly with project managers to produce PCB designs supporting AIS programs
• Apply modern design standards and guidelines to create highly reliable, highly manufacturable assemblies
• Implement designs that can support reuse of existing System-on-Chip, System-on-Module cores, or all new designs, as needed, that focus on edge computation, FPGA, deployment, high precision sensors, RF, and both low and high-power designs
• Own the end-to-end design-to-manufacture pipeline and bill of material (BOM), coordinating external PCB design and manufacturing, and assembly, as needed, across multiple fabrication and assembly houses
• Work in a fast-paced environment, juggling multiple concurrent projects and customers
• Work well on your own and as part of interdisciplinary teams

REQUIRED QUALIFICATIONS

• Bachelor’s degree in electrical engineering or similar and 5+ years of professional experience in PCB design
• Ability to read and interpret schematics and apply best practices appropriate for each design
• Expertise in PCB fabrication processes, limitations, design rules, and best practices
• Experience using Altium Designer CAD tools
• Experience developing component libraries and library management
• Experience reworking existing physical and soft PCB designs into different form factors
• Experience with a variety of board types, including high density and high layer count (greater than 16) digital designs, power electronics, flex circuits, and RF circuits
• Experience with high-density interconnect (HDI) and thicker boards (greater than 1.6mm)
• Experience with high-speed digital interfaces and controlled impedance routing requirements like USB, PCIe, Ethernet, SERDES, and DDR memory
• Strong communication skills
• Currently possesses and is able to maintain an active U.S. Top Secret SCI security clearance with Full Scope Polygraph

PREFERRED QUALIFICATIONS

• 5+ years of professional experience in PCB design
• Familiarity with other design tools such as OrCAD, Cadence, or Allegro
• Experience in applying relevant IPC standards, CID, CID+ certification
• Experience with high-pin count packages (FPGA fanout)
• Experience with signal and power integrity rules and their effect on layout

ABOUT THE JOB

Anduril is seeking a Chief Engineer to lead the design, development, and technical integration for a product line of critical network capabilities. This role is not just about leading; it's about re-envisioning the technical future of secure, resilient, and high-bandwidth communication for all of Anduril and the DoW’s autonomous platforms and integrated defense solutions. A successful candidate will not only have a strong technical background, but must also possess a vision for leadership that embraces Anduril’s mission to disrupt the defense technology ecosystem across technical and programmatic domains.

As Chief Engineer, you will be responsible for the end-to-end technical success and architectural coherence of complex, multi-disciplinary network systems. You will operate at the intersection of complex engineering challenges in embedded systems, networking protocols, mechanical integration, and strategic program execution. You will work directly with our most senior technical leaders, program managers, and customers to define, build, and deliver cutting-edge networking capabilities that impact national security.

WHAT YOU’LL DO

• Technical Vision & Architecture: Own and define the comprehensive technical architecture, design principles, and engineering roadmap for complex, distributed network systems. Ensure technical consistency, scalability, performance, and cyber-resilience across all technical domains (embedded software, UI/UX design, network protocols, hardware integration, ruggedized mechanical designs).
• System Integrity & Risk Management: Serve as the ultimate technical arbiter, ensuring the integrity, reliability, security, and survivability of our network systems in contested and high security environments. Proactively identify and mitigate technical risks related to performance, security, and physical robustness.
• Engineering Leadership & Mentorship: Provide decisive technical leadership and guidance to large, multi-disciplinary engineering teams (Mechanical, Electrical, Software) to deliver high quality products that can be manufactured at scale. Foster a culture of technical excellence, rigorous design, rapid iteration, and continuous improvement, ensuring seamless collaboration across disciplines.
• Strategic Technical Guidance: Translate strategic objectives and customer needs into actionable technical requirements and solutions. Drive trade studies, technology selections, and critical design decisions related to network topology, protocol selection, embedded hardware integration, power management, thermal management, and software-defined networking.
• Stakeholder Engagement: Act as the primary technical interface with internal stakeholders (Product, Program Management, Executive Leadership) and external stakeholders (customers, partners, regulatory bodies), clearly articulating complex technical concepts, challenges, and solutions for network capabilities.
• Rapid Prototyping, Fielding, and Scaled Production: Drive aggressive timelines for design, development, integration, and testing of network systems, supporting rapid prototyping, fielding, and scaled production of operational capabilities for defense applications.

REQUIRED QUALIFICATIONS

• 15+ years of progressive experience in complex network systems engineering, R&D, and product development, with a significant portion in a leadership or Chief Engineer capacity for multi-disciplinary systems.
• Deep and broad technical expertise across network system design and implementation, encompassing significant experience in at least two of the following areas, with a strong understanding of the others:
  • Software Engineering: Network protocols (e.g., IP, routing, transport layer), distributed systems, embedded networking, real-time operating systems, cybersecurity for networks, data link layer implementation.
  • Electrical Engineering: Digital communications, power systems for ruggedized network nodes, high-speed digital design for embedded processors, PCB design for communication systems.
  • Mechanical Engineering: Ruggedized enclosure design, thermal management for radios and processors, vibration/shock mitigation, integration of network hardware onto various platforms (airborne, ground, maritime, soldier-worn).
  • Cross-disciplinary systems integration experience, particularly bridging the gap between hardware and software for robust network performance in demanding environments.
• Proven ability to define, architect, and lead the development of highly complex, integrated network systems from concept through deployment and sustainment.
• Exceptional leadership skills with a track record of building, mentoring, and inspiring high-performing multi-disciplinary technical teams in fast-paced, challenging environments.
• Demonstrated experience in strategic technical planning, roadmapping, and managing technical debt while delivering on aggressive schedules for networking products.
• Strong problem-solving acumen, with the ability to break down highly ambiguous technical challenges related to network performance and resilience, and drive to practical, innovative solutions.
• Excellent communication, presentation, and interpersonal skills to effectively convey complex technical concepts to diverse audiences, including executives, customers, and technical teams across different engineering disciplines.
• Bachelor's degree in Computer Science, Electrical Engineering, Mechanical Engineering, Aerospace Engineering, Robotics, or a related technical field. Master's or Ph.D. preferred.
• Minimum Secret Security Clearance required. (Active TS/SCI strongly preferred).

PREFERRED QUALIFICATIONS

• Background in cybersecurity for network infrastructure and resilience against near-peer nation state cyber risks.
• Experience with network modeling, simulation, and analysis tools for predicting performance in diverse environments.
• Demonstrated ability to drive technical decisions involving significant financial and programmatic impact for network system development.
• Familiarity with military communication standards and requirements (e.g., Joint All-Domain Command and Control (JADC2) concepts).

ABOUT THE TEAM

Anduril’s Air and Ground Deterrence (AGD) Division develops integrated robotic systems designed to provide multi-domain situational awareness and force protection across land, sea, and air. From detection to tracking, identification, deterrence, and defeat, our family of networked sensors and effectors enables our customers to rapidly detect and identify potential threats. close the kill chain against a broad range of Unmanned Aerial System (UAS) threats.

Working across product, engineering, sales, logistics, operations, and mission success, the multidisciplinary Sentry Hardware team with AGD serves as the key system integrator of the Anduril Sentry Family of Systems (FoS). In particular, the Sentry Electrical Engineering Team drives end-to-end development, from electrical architecture and ruggedized hardware design to verification, integration, and test, ensuring scalable, production and mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and other key stakeholders.

ABOUT THE JOB

The Sentry Engineering team builds hardware products and systems that leverage artificial intelligence to provide highly accurate, persistent autonomous awareness across land, sea and air. With an AI-enabled edge processing, continuous 360 pan / tilt capability, and a variety of radars and sensors, Sentry can autonomously identify, detect, and track objects of interest to bring increased awareness to borders, military bases, oil and gas pipelines, airports and other critical infrastructure.

We are looking for an Electrical Engineer to join our rapidly growing team in Irvine, CA. This role will own rapidly developed, ruggedized electronics design in addition to scaling legacy design concepts to support full-rate production. In this role, you will partner with our Architecture and Product Management team to help drive system requirements prior to owning full PCB and/or electrical system design. This will require identifying high risk areas, creating and validating electronics designs for embedded compute and/or power systems, and testing for long term-reliability while considering manufacturability and testability in the design.

If you are someone who enjoys designing mission-critical electrical circuit cards and integrated systems with the freedom to drive product development from often undefined requirements then this role is for you.

WHAT YOU’LL DO

• Take ownership as the main point of contact for electrical integration activities.
• Provide hands on and in-field support of prototype and production level product.
• Collaborate with mechanical engineers to optimize selection, design and integration of high power components, modules and distribution.
• Trade-off component and module selections against size, weight, power and EMC requirements.
• Collaborate with design team to achieve reliability goals at a system level in context of concepts of operation.

REQUIRED QUALIFICATIONS

• Minimum 5 years of professional experience
• Self starter with the ability to design digital & analog electronics from concept and functional prototype, to production ready product.
• Ability to troubleshoot existing hardware to find root cause of issues and implement improvements to improve the design.
• Develop clear documentation to capture design requirements, specifications, test coverage, and test reports.
• Complete full cycle PCB design including collecting requirements, schematic design, component selection, completion of layout, bring-up, test, debug, validation, characterization, and integration with the system.
• Work closely with other mechanical, software, firmware, and test engineers to deliver fully functional products.
• Work in a fast-paced environment supporting new developments, active deployments, and customer operated hardware.
• Concurrently manage involvement in multiple projects at various stages.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

PREFERRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 5+ years of experience designing, testing and troubleshooting complex board designs and products.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with switch mode power supply design and testing.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Exceptional organization and communication skills (both written and oral).
• Proficient with Altium Designer or equivalent electronic design automation design tools.
• Proficiency with scripting languages (Python, Matlab, etc.)
• Ability to root cause Full stack HLOS application to hardware component level issues.

ABOUT THE TEAM

Anduril’s Air and Ground Deterrence (AGD) Division develops integrated robotic systems designed to provide multi-domain situational awareness and force protection across land, sea, and air. From detection to tracking, identification, deterrence, and defeat, our family of networked sensors and effectors enables our customers to rapidly detect and identify potential threats. close the kill chain against a broad range of Unmanned Aerial System (UAS) threats.

Working across product, engineering, sales, logistics, operations, and mission success, the multidisciplinary Sentry Hardware team with AGD serves as the key system integrator of the Anduril Sentry Family of Systems (FoS). In particular, the Sentry Electrical Engineering Team drives end-to-end development, from electrical architecture and ruggedized hardware design to verification, integration, and test, ensuring scalable, production and mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and other key stakeholders.

ABOUT THE JOB

The Sentry Engineering team builds hardware products and systems that leverage artificial intelligence to provide highly accurate, persistent autonomous awareness across land, sea and air. With an AI-enabled edge processing, continuous 360 pan / tilt capability, and a variety of radars and sensors, Sentry can autonomously identify, detect, and track objects of interest to bring increased awareness to borders, military bases, oil and gas pipelines, airports and other critical infrastructure.

We are looking for an Electrical Engineer to join our rapidly growing team in Irvine, CA. This role will own rapidly developed, ruggedized electronics design in addition to scaling legacy design concepts to support full-rate production. In this role, you will partner with our Architecture and Product Management team to help drive system requirements prior to owning full PCB and/or electrical system design. This will require identifying high risk areas, creating and validating electronics designs for embedded compute and/or power systems, and testing for long term-reliability while considering manufacturability and testability in the design.

If you are someone who enjoys designing mission-critical electrical circuit cards and integrated systems with the freedom to drive product development from often undefined requirements then this role is for you.

WHAT YOU’LL DO

• Take ownership as the main point of contact for electrical integration activities.
• Provide hands on and in-field support of prototype and production level product.
• Collaborate with mechanical engineers to optimize selection, design and integration of high power components, modules and distribution.
• Trade-off component and module selections against size, weight, power and EMC requirements.
• Collaborate with design team to achieve reliability goals at a system level in context of concepts of operation.

REQUIRED QUALIFICATIONS

• Minimum 5 years of professional experience
• Self starter with the ability to design digital & analog electronics from concept and functional prototype, to production ready product.
• Ability to troubleshoot existing hardware to find root cause of issues and implement improvements to improve the design.
• Develop clear documentation to capture design requirements, specifications, test coverage, and test reports.
• Complete full cycle PCB design including collecting requirements, schematic design, component selection, completion of layout, bring-up, test, debug, validation, characterization, and integration with the system.
• Work closely with other mechanical, software, firmware, and test engineers to deliver fully functional products.
• Work in a fast-paced environment supporting new developments, active deployments, and customer operated hardware.
• Concurrently manage involvement in multiple projects at various stages.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

PREFERRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 5+ years of experience designing, testing and troubleshooting complex board designs and products.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with switch mode power supply design and testing.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Exceptional organization and communication skills (both written and oral).
• Proficient with Altium Designer or equivalent electronic design automation design tools.
• Proficiency with scripting languages (Python, Matlab, etc.)
• Ability to root cause Full stack HLOS application to hardware component level issues.

ABOUT THE TEAM

Anduril's Space team is dedicated to expanding our AI-powered capabilities into the final frontier, enhancing Space Domain Awareness, Space Control, and Command and Control for U.S. military and allied partners. We're developing fully integrated hardware and software systems, including Lattice for Space Missions and modular payloads, to address growing threats in space and ensure our Guardians maintain a decisive advantage in this contested warfighting domain.

ABOUT THE JOB

This position involves working in a multi-disciplinary environment on the design, fabrication and flight testing of advanced payloads for Space. We are interested in candidates that are excited to work on new projects from conceptualization through production.

WHAT YOU’LL DO

• Work with EE Manager and Systems Engineer to develop requirements
• Create a Block Diagram of the proposed design
• Make a Schematic for the design in Altium
• Simulation of the circuit design
• Perform Layout or work with a Layout Engineer to design the PCB
• Generate Drawings and Documentation for the design
• Perform Design Validation Testing (DVT) on the finished PCBA
• Support testing and test development
• Debug support

REQUIRED QUALIFICATIONS

• 5+ years of relevant experience
• B.S. in Electrical or Computer Engineering or equivalent
• Team player with strong organization and communication skills
• Experience with schematic design
• Experience performing board bring-up
• Experience performing schematic reviews
• Ability to work independently under tight deadlines with minimal supervision, delivering quality results in fast-paced environments.
• Experience developing checklists and procedures for developed designs
• Experience developing technical drawings and documentation
• Experience with power circuit design and implementation
• Familiarity with lab equipment (DMM, O-Scope, Power Supply, etc)
• Must be authorized to work in the United States

PREFERRED QUALIFICATIONS

• Schematic and layout design in Altium
• Experience performing PDN analysis
• Experience with differential pair routing and debugging
• Proficient in soldering
• Knowledge of common communication busses (I2C, SPI, UART, RS-422/485, Eth, PCIe)
• 2+ years of experience in New Space

ABOUT THE TEAM

Anduril's Space team is dedicated to expanding our AI-powered capabilities into the final frontier, enhancing Space Domain Awareness, Space Control, and Command and Control for U.S. military and allied partners. We're developing fully integrated hardware and software systems, including Lattice for Space Missions and modular payloads, to address growing threats in space and ensure our Guardians maintain a decisive advantage in this contested warfighting domain.

ABOUT THE JOB

This position involves working in a multi-disciplinary environment on the design, fabrication and flight testing of advanced payloads for Space. We are interested in candidates that are excited to work on new projects from conceptualization through production.

WHAT YOU’LL DO

• Work with EE Manager and Systems Engineer to develop requirements
• Create a Block Diagram of the proposed design
• Make a Schematic for the design in Altium
• Simulation of the circuit design
• Perform Layout or work with a Layout Engineer to design the PCB
• Generate Drawings and Documentation for the design
• Perform Design Validation Testing (DVT) on the finished PCBA
• Support testing and test development
• Debug support

REQUIRED QUALIFICATIONS

• 12+ years of relevant experience
• B.S. in Electrical or Computer Engineering or equivalent
• Team player with strong organization and communication skills
• Experience with schematic design
• Experience performing board bring-up
• Experience performing schematic reviews
• Ability to work independently under tight deadlines with minimal supervision, delivering quality results in fast-paced environments.
• Experience developing checklists and procedures for developed designs
• Experience developing technical drawings and documentation
• Experience with power circuit design and implementation
• Familiarity with lab equipment (DMM, O-Scope, Power Supply, etc)
• Must be authorized to work in the United States

PREFERRED QUALIFICATIONS

• Schematic and layout design in Altium
• Experience performing PDN analysis
• Experience with differential pair routing and debugging
• Proficient in soldering
• Knowledge of common communication busses (I2C, SPI, UART, RS-422/485, Eth, PCIe)
• 4+ years of experience in New Space

ABOUT THE TEAM

Anduril's Space team is dedicated to expanding our AI-powered capabilities into the final frontier, enhancing Space Domain Awareness, Space Control, and Command and Control for U.S. military and allied partners. We're developing fully integrated hardware and software systems, including Lattice for Space Missions and modular payloads, to address growing threats in space and ensure our Guardians maintain a decisive advantage in this contested warfighting domain.

ABOUT THE JOB

This position involves working in a multi-disciplinary environment on the design, fabrication and flight testing of advanced payloads for Space. We are interested in candidates that are excited to work on new projects from conceptualization through production.

WHAT YOU’LL DO

• Work with EE Manager and Systems Engineer to develop requirements
• Create a Block Diagram of the proposed design
• Make a Schematic for the design in Altium
• Simulation of the circuit design
• Perform Layout or work with a Layout Engineer to design the PCB
• Generate Drawings and Documentation for the design
• Perform Design Validation Testing (DVT) on the finished PCBA
• Support testing and test development
• Debug support

REQUIRED QUALIFICATIONS

• 8+ years of relevant experience
• B.S. in Electrical or Computer Engineering or equivalent
• Team player with strong organization and communication skills
• Experience with schematic design
• Experience performing board bring-up
• Experience performing schematic reviews
• Ability to work independently under tight deadlines with minimal supervision, delivering quality results in fast-paced environments.
• Experience developing checklists and procedures for developed designs
• Experience developing technical drawings and documentation
• Experience with power circuit design and implementation
• Familiarity with lab equipment (DMM, O-Scope, Power Supply, etc)
• Must be authorized to work in the United States

PREFERRED QUALIFICATIONS

• Schematic and layout design in Altium
• Experience performing PDN analysis
• Experience with differential pair routing and debugging
• Proficient in soldering
• Knowledge of common communication busses (I2C, SPI, UART, RS-422/485, Eth, PCIe)
• 3+ years of experience in New Space

ABOUT THE TEAM

The Intelligence Systems team is focused on positioning Anduril as a lead provider of specialized engineering and products for Intelligence Community (IC) customers. We work within the IC to understand their requirements, shape their concepts of operation, and deliver exquisite capability across their problem set. We aim to develop and deploy critically needed capabilities that address our customers’ most pressing national security requirements.

ABOUT THE JOB

We are seeking a Senior RF Test Engineer specializing in EMI/EMC to join our expanding team in Santa Ana, CA. This role focuses on leading EMI/EMC (Electromagnetic Interference/Electromagnetic Compatibility) test design initiatives for our cutting-edge products.

WHAT YOU’LL DO

• Evaluation of high-speed digital, precision analog, RF, and high-power designs for EMI/EMC compliance.
• Work with design teams to establish manufacturing EMC test limits based on development characterization tests.
• Conduct tests to assess electromagnetic emissions and susceptibility performance.
• Troubleshoot and resolve EMI/EMC performance issues at the component level.
• Work in a fast-paced environment, having to juggle multiple concurrent projects and customers.
• Stay updated on military and aerospace EMI/EMC standards (MIL-STD-461, DO-160, MIL-STD-704)
• Ability to generate requirements and work cross functionally with Mechanical, Thermal, Validation engineers
• Factory and manufacturing support from a design, DfX, quality, debug, and failure analysis perspective

REQUIRED QUALIFICATIONS

• 8+ years of professional experience in designing hardware products for EMI/EMC compliance.
• Knowledge of EMI/EMC Test Equipment such as spectrum analyzers, antennas, LISN, NF Probes, GTEM & Anechoic Chamber etc.
• Knowledgeable with analog and digital circuit design and PCB Layout techniques to meet mechanical, electrical, EMI/EMC, and manufacturing requirements.
• Ability to read and interpret schematics and apply best practices appropriate for each design.
• Ability to design / edit test automation software such as LabVIEW using multiple architectures
• Familiarity with standard interfaces such as MIPI, DP, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, SOC devices and technologies.
• Ability to determine work priorities based on broad direction from management.
• Excellent communication skills and ability to work effectively with others.
• Ability to work within our company and team culture.
• Active U.S. Secret security clearance

WHAT YOU'LL DO

• Design embedded electronics from concept to functional prototype, including hardware selection, schematic & PCB design, board bring-up, and system level integration
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both lab equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools
• Work with modern SoCs and networking hardware to build Anduril platforms
• Work closely with firmware/software engineers for processor/peripheral selection, board bring up, and troubleshooting.
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products
• Work in a fast-paced environment supporting new developments, active deployments, and customer operated hardware
• Concurrently manage involvement in multiple projects at various stages

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering
• 8+ years of experience designing, testing, and troubleshooting complex hardware, embedded systems, and products
• Demonstrated experience with multi-gigabit SERDES, DDR memory busses, Ethernet MAC and PHY interfaces, FPGAs, and common communication busses like SPI and I2C
• Experience with microprocessor and microcontroller selection, configuration, and interfacing
• Experience with component, schematic capture, high speed board design, and guiding PCB layout.
• Competence with test equipment such as oscilloscopes, logic analyzers, debuggers, current-probes, and automation of tests
• Familiarity with product development processes and tools
• Knowledge of embedded software development, including use of timers, interrupts, hardware peripherals such as SPI controllers and ADCs
• Knowledge of embedded Linux development, including device trees, hardware drivers, bootloaders, and basic Unix/Linux tools
• Exceptional organization and communication skills (both written and oral)
• Proficient with Altium Designer or equivalent electronic design tools
• Familiar with common programming languages like Python for test automation.
• Must be able to obtain and hold a U.S. Top Secret Security Clearance

PsiQuantum’s mission is to build the first useful quantum computers—machines capable of delivering the breakthroughs the field has long promised. Since our founding in 2016, our singular focus has been to build and deploy million-qubit, fault-tolerant quantum systems. 

Quantum computers harness the laws of quantum mechanics to solve problems that even the most advanced supercomputers or AI systems will never reach. Their impact will span energy, pharmaceuticals, finance, agriculture, transportation, materials, and other foundational industries. 

Our architecture and approach is based on silicon photonics. By leveraging the advanced semiconductor manufacturing industry—including partners like GlobalFoundries—we use the same high-volume processes that already produce billions of chips for telecom and consumer electronics. Photonics offers natural advantages for scale: photons don’t feel heat, are immune to electromagnetic interference, and integrate with existing cryogenic cooling and standard fiber-optic infrastructure. 

In 2024, PsiQuantum announced government-funded projects to support the build-out of our first utility-scale quantum computers in Brisbane, Australia, and Chicago, Illinois. These initiatives reflect a growing recognition that quantum computing will be strategically and economically defining—and that now is the time to scale. 

PsiQuantum also develops the algorithms and software needed to make these systems commercially valuable. Our application, software, and industry teams work directly with leading Fortune 500 companies—including Lockheed Martin, Mercedes-Benz, Boehringer Ingelheim, and Mitsubishi Chemical—to prepare quantum solutions for real-world impact. 

Quantum computing is not an extension of classical computing. It represents a fundamental shift—and a path to mastering challenges that cannot be solved any other way. The potential is enormous, and we have a clear path to make it real. 

Come join us. 

Job Summary:

The mission of PsiQuantum's Principal Hardware Design Engineer role is to support the Electronics team by owning hardware designs integral to the underlying system of the quantum computer. This engineer will collaborate in cross-functional teams of thermal, mechanical, firmware, optical engineers. The designs will meet the requirements of the overall system architecture and physical framework of the quantum computer.

Responsibilities:

• Define, Design and deliver production ready high-speed embedded hardware systems.
• Design, create schematics, and oversee PCB layout of analog and digital circuitry consisting of but not limited to high-speed transceivers, 10+ Gbps electrical and optical data links, FPGA's, microcontrollers, clock distribution, and power distribution.
• Ensure signal integrity and EMI suppression is accounted for in all designs.
• Design and create test set-ups for testing of electro-optic modules.
• Characterize, optimize, and debug analog, digital, and electro-optic circuitry using equipment such as mixed signal & sampling oscilloscopes, vector network analyzers, signal generators, multimeters, DC power supplies.
• Develop software to drive measurements.
• Analyze data and extract key performance parameters.
• Maintain detailed documentation of hardware designs, test results, and design changes.
• Software tools:
  • Orcad Schematic Capture and Allegro PCB Layout
  • C++, Python, RTL (VHDL or Verilog)
  • Keysight PathWave ADS
  • Microsoft Office

Experience/Qualifications:

• 7 years of experience with a Master Degree.
• 9-12 years of experience with a B.S. Degree.
• Results oriented.
• Delivers on commitments.
• Attention to detail.
• Data-driven in decision-making.
• Strong problem-solving skills.
• Proven team player with an ability to work effectively across departments, sites, time zones in direct and matrix team environments.
• Excellent verbal and written communication skills with an ability to communicate effectively to a variety of audiences ranging from senior leadership and technical experts to entry-level staff.

PsiQuantum provides equal employment opportunity for all applicants and employees. PsiQuantum does not unlawfully discriminate on the basis of race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, national origin, ancestry, citizenship, age, physical or mental disability, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, or any other basis protected by applicable laws.

Note: PsiQuantum will only reach out to you using an official PsiQuantum email address and will never ask you for bank account information as part of the interview process. Please report any suspicious activity to recruiting@psiquantum.com.

We are not accepting unsolicited resumes from employment agencies.

Graphcore is a globally recognised leader in Artificial Intelligence computing systems. The company designs advanced semiconductors and data centre hardware that provide the specialised processing power needed to drive AI innovation, while delivering the efficiency required to support its broader adoption.   

As part of the SoftBank Group, Graphcore is a member of an elite family of companies responsible for some of the world’s most transformative technologies. We are opening a new AI Engineering Campus in Austin, which will play a central role in Graphcore's work building the future of AI computing. 

The Electrical Engineer will play a pivotal role in designing innovative hardware systems for AI/ML applications. We are seeking a motivated Electrical Engineer with 2–4 years of experience in schematic capture, PCB design, and server hardware development. This role includes close collaboration with multiple partners to drive designs from concept through mass production. The ideal candidate is comfortable working across organizational boundaries, ensuring design quality, manufacturability, and on-time delivery in a fast-paced environment.

Responsibilities:

• Develop and maintain electrical schematics for various printed circuit assemblies
• Design and layout multilayer PCBs
• Work closely with partners to review designs, provide technical guidance, and ensure alignment with system requirements
• Drive design for manufacturability (DFM), design for assembly (DFA), and design for testability (DFT)
• Support server subsystem integration
• Participate in design reviews
• Support prototype builds, board bring-up, debugging, and validation
• Track and resolve design issues, including root cause analysis and corrective actions
• Ensure proper documentation, revision control, and engineering change management (ECO/ECN processes)

Requirements:

• Bachelor’s degree in electrical engineering
• 2–4 years of experience in schematic capture and PCB design
• Proficiency with PCB design and schematic tools
• Strong understanding of analog and digital circuit design fundamentals
• Experience with multilayer PCB layout
• Experience with lab equipment (oscilloscope, multimeter, logic analyzer)

Differentiators:

• Experience with server platforms or data center hardware
• Knowledge of power delivery network (PDN) design for high-power systems
• Familiarity with signal integrity and power integrity analysis tools
• Experience with compliance and validation (EMI/EMC, safety, regulatory)
• Exposure to global manufacturing environments and supply chain coordination
• Familiarity with PLM systems and change management workflows

We welcome people of different backgrounds and experiences and are committed to building an inclusive work environment that makes Graphcore a great home for everyone. We are an equal opportunity employer and want to build a work environment where everyone is happy, productive and respectful so they can do their best work. If you have a disability or additional need that requires accommodation, just let us know.

Basic Qualifications

• BS / MS in Electrical, Electronics, Compute, Aerospace Engineering, or equivalent
• Experienced in automotive industry. (TIER1/TIER2 preferred)
• Experience in embedded electrical designs
• Familiar with EMI/EMC design, test and troubleshooting
• Familiar with electrical architecture topologies, Functional Safety (ISO 26262) and other industry standards
• Solid understanding of system/component design
• Familiar with vehicle bus, e.g. ETH/CAN/LIN/LVDS, communication protocols and troubleshooting tools
• Experience in thermal management of ECU embedded electronics
• Ability to participate and lead schematic and layout design reviews
• Good knowledge of state-of-the-art hardware systems, software tools and algorithms for interfaces required for actuators, firmware development, in-vehicle bus architectures, in-vehicle CPU/GPU/NPU computing platforms, image and audio signal processors, connectivity
• Knowledge of ADAS, Infotainment Systems and Zonal Architectures, Software defined vehicles
• Being able to support more than one expertise domain is a plus
• Power Integrity and Signal Integrity experience is a plus
• Experience in an architectural hardware/system role is a plus

Should have experience in:

• Min 2 Yrs. Schematic and Layout design
• Experience in Altium is a big plus
• High complex multilayer layout design
• PCB design rules
• PCB to Mechanical interface and constraints
• HW debugging, investigations, problem solving with electrical lab equipment

ABOUT THE TEAM: 

Our products are complex, integrated hardware-software products in which state-of-the-art electrical systems for power, compute, communications, and controls play a critical, differentiating role. We have successfully delivered a dozen products and have another dozen in the works. We need a senior, experienced, electrical engineering leader to oversee the team developing the electrical subsystems for these products. You will own a large, multi-discipline electrical team and will be responsible for independently developing and executing a comprehensive technical vision across our products. You will be a key senior leader and will partner with other engineering and production teams to make your vision a reality. You will independently lead and manage your team and will be responsible for resource planning, hiring, and mentoring your team members. Your vision is key to the growth and success of our products and will have a meaningful impact on U.S. military command and control capabilities.

WHAT YOU’LL DO:

Our products are complex, integrated hardware-software products in which state-of-the-art electrical systems for power, compute, communications, and controls play a critical, differentiating role. We have successfully delivered a dozen products and have another dozen in the works. We need a senior, experienced, electrical engineering leader to oversee the team developing the electrical subsystems for these products. You will own a large, multi-discipline electrical team and will be responsible for independently developing and executing a comprehensive technical vision across our products. You will be a key senior leader and will partner with other engineering and production teams to make your vision a reality. You will independently lead and manage your team and will be responsible for resource planning, hiring, and mentoring your team members. Your vision is key to the growth and success of our products and will have a meaningful impact on U.S. military command and control capabilities.

You will:

• Oversee a 40+ member electrical engineering department, including electrical architecture, PCB design, harness design, firmware development, system integration, and test
• Own the design and integration of electrical subsystems for multiple products simultaneously
• Drive the transition of electrical designs from prototype to production
• Independently lead people management functions for the entire team, including overseeing personnel growth, resource planning, and hiring
• Review electrical engineering designs and oversee the definition and implementation of best practices
• Partner with mechanical, systems, manufacturing, and supply chain leaders to integrate electrical designs into products and repeatably build them in production
• Manage electrical engineering resources across current and emergent needs to maintain on-time delivery and reliable execution of program requirements
• Author and drive a compelling vision for our electrical engineering roadmap that helps to guide our products into the next generation of features
• Partner with business leaders to triage limited resources against new opportunities, using your business acumen to inform product planning

Qualifications:

• Proven track-record of owning the design and delivery of electrical systems for complex hardware products
• Demonstrated ability to independently design and integrate electrical components into production scale products
• Deep technical fluency and passion for engineering details
• Experience working on both high-power (>100kW) and low power (<20W) ground or automotive systems
• Past leadership of large, multi-discipline, electrical engineering teams
• Strong people management and hiring skills
• Success working in start-up, scale-up, or other high-ambiguity environments
• Business acumen and the ability to use financial metrics to guide engineering decisions
• 10+ years overseeing the development of complex electrical systems
• Bachelors degree or higher in electrical engineering
• U.S. Security Clearance eligible

ABOUT THE TEAM

Anduril’s Maritime Division has assembled a diverse team of experts in software, robotics, artificial intelligence, sensor fusion, and data analysis to create software and hardware solutions that radically evolve the capabilities of our customers. We are fielding the next generation of autonomous systems to tackle the extremely challenging industry demands of maritime operations. Anduril has brought to market a unique, ultra-long-range, full-ocean-depth underwater vessel platform and a completely refreshed maritime vehicle and flexible manufacturing architecture that scales from "small" to "extra-large" vehicle sizes. Today, Anduril is executing on billion-dollar contracts while simultaneously performing Robot-as-a-Service (RaaS) AUV operations.

We are continuing to expand our product portfolio, now moving into the surface maritime domain. Products like Dive-XL, Dive-LD, Copperhead, Seabed Sentry, and surface products in the pipeline will create a system-of-systems that enable a multitude of autonomous missions across all maritime domains. If you are passionate about solving problems that have real impact and working on systems that directly contribute to achieving national strategic priorities, we want you to join Anduril’s Maritime Division and help us build the future of defense capability.

ABOUT THE JOB

We are seeking a highly motivated and experienced Electrical Engineer to aid the technical development of a holistic support system for service, maintenance, deployment, launch, and recovery of the Copperhead family of vehicles. This role involves close collaboration with electrical and systems teams as well as customer representatives to ensure effective support and execution of Copperhead missions in a variety of rugged environments.

As a key member of our Quincy, MA based team, the Electrical Engineer will work closely with the program leadership and a wide spectrum of cross-departments focused on solving hard problems and changing the trajectory of the industry. This position will be responsible for designing and supporting the integration of various electrical subsystems, supporting testing efforts, and ensuring overall system performance meets the required specifications and standards.

Join our dynamic team and help us build the next generation of autonomous maritime systems!

WHAT YOU'LL DO

• Develop electrical schematics, power system single line diagrams, system interconnect diagrams and define wire harnesses that connect electronic equipment within a subsystem and between subsystems
• Integrate a variety of existing electrical sub-systems to provide novel capability with an eye towards maintaining commonality with other Anduril Maritime systems.
• Design electrical interfaces and enclosures for integration of sensors, and peripheral equipment for autonomous systems
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both test equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools
• Develop subsystems (sensors, interfaces, power management, and networking) for bespoke capabilities
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products
• Work in a fast-paced environment balancing schedule against cost and performance parameters
• Conduct peer-level and cross-discipline design reviews, perform requirements analysis, and plan system verification to ensure compliance with project goals and industry standards

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent with 4+ years of experience designing, testing, and troubleshooting electrical systems
• Knowledge of modern analog and digital electronics and electronic circuits
• Experience developing schematics, interconnect diagrams, and wiring harnesses
• Experience with PCB design including collecting requirements, schematic design (Altium, Eagle), component selection, supervision or completion of layout, bring-up, test, debug and system integration
• Familiarity with networking and standard interfaces such as Ethernet, CAN, I2C, USB, MODBUS, ProfiNet, etc
• Competence with test equipment such as multi-meter, oscilloscopes, logic analyzers, and automation of tests
• Experience with electro-mechanical and electrical design concepts
• Experience in design for signal integrity / power integrity
• Experience in designing and integrating low-power electronics
• Experience in fieldable system design
• High-ownership and a bias toward action – if you see a problem, you want to solve and fix it
• Eligible to obtain and maintain an active U.S. Secret security clearance
• Ability to travel 5%

PREFERRED QUALIFICATIONS

• Experience designing electronic circuits and hardware kits
• Experience designing electrical and power systems for autonomous systems
• Familiarity with software development processes and tools such as git, Github, JIRA, etc
• Comfortable in conducting worst case circuit or uncertainty and fault analysis
• Experience with high reliability and/or autonomous systems
• Familiarity with designing for rugged environments

ABOUT THE TEAM 

The Anduril Imaging team develops state-of-the-art imaging systems across both hardware and software, deployed to tackle the most significant security challenges of America and its allies.  The team is heavily involved in utilizing computer vision, perception, electro-optical, infrared, and sensor data to give our war fighters and allies an advantage.   

ABOUT THE JOB 

The Imaging team is seeking an Embedded Software Engineer to help design a new product lines. In this role, you will work closely with an interdisciplinary technical team to define, complete the design and analysis, build prototypes leading to ground and flight testing, and mature the prototypes into products. 

WHAT YOU’LL DO

• Design firmware for embedded hardware, from concept to functional prototype, board bring-up, and system level integration
• Write C/C++ for ARM processers in modern FPGAs, SoCs, and SoMs
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both lab equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools
• Work closely with hardware and software engineers for component selection, troubleshooting, and product support
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products
• Develop firmware across multiple products at various stages of their development cycle

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering, Computer Engineering, or equivalent
• 5+ years of experience developing firmware for for embedded processors using C/C++
• Experience with configuration control system like (eg Git , Github etc..)
• Experience with testing, supporting, and troubleshooting complex hardware, embedded systems, and products
• Competence with test equipment such as oscilloscopes, logic analyzers, debuggers, current-probes, and automation of tests
• Eligible to obtain and maintain an active U.S. Secret security clearance 

PREFERRED QUALIFICATIONS 

• 5+ years of experience FPGA devices
• Demonstrated experience designing for common communication busses like SPI, I2C, CAN
• Embedded software development experience with the use of timers and interrupts
• Experience with developing HDL firmware for Xilinx FPGA devices and embedded real-time systems with C/C++
• Experience with component selection, schematic capture, high speed board design, and PCB layout
• Knowledge of embedded Linux development, including device trees, hardware drivers, bootloaders, and basic Unix/Linux tools
• Familiar with common programming languages like Python and MATLAB
• Familiarity with infrared image sensor technology