ABOUT THE ROLE

We are looking for a System Test Engineer with a focus on EMI/EMC to join our rapidly growing team in Costa Mesa, CA. In this role, you will work closely with avionics, system, and software engineers to create test systems for development, qualification, verification, and validation purposes. If you are someone who thrives in a fast-paced environment supporting new developments, active deployments, and customer operated hardware, we are looking for you.

WHAT YOU'LL DO

• Core Responsibility: Own EMC test readiness end-to-end from translating designs into test configurations to driving schedules and deliverables across teams.
• Create test systems to support all phases of product development.
• Define cable harnesses, breakout interfaces, and test hardware setups.
• Collaborate with SW/FW for test modes, stimulation, and telemetry.
• Configure and verify DUT operating modes prior to and during EMC testing.
• Develop and maintain test setup and configuration documentation.
• Track and drive on-time delivery of test hardware, fixtures, and support equipment to the EMC team.
• Proactively manage the test schedule based on hardware availability, coordinate across disciplines, and remove blockers to eliminate dead time.
• Maintain real-time visibility into schedule risks and escalate early to keep milestones on track.
• Participate in design reviews and provide input to identify issues and drive design choices.
• Conduct root cause analysis in support of vehicle integration and field operations.

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or equivalent.
• 3+ years design experience with NX CAD software for 3D modeling and drafting.
• Proficient in designing electrical harnessing for rugged commercial, industrial, aerospace, or military applications.
• Familiarity with common electrical bus interfaces (CAN, Ethernet, RS422, RS232, MIL-STD-1553).
• Proficient with schematic capture and PCB layout tools (e.g., Altium Designer, OrCAD, KiCad).
• Ability to read and interpret schematics, wiring diagrams, and cable harness drawings.
• Proficient with Microsoft Office Suite and engineering documentation tools.
• Must possess excellent communication skills.
• Eligible to obtain and maintain an active U.S. Secret security clearance

REQUIRED QUALIFICATIONS

• Experienced and familiar with aircraft avionics module vendors and avionics component suppliers in UAS programs.
• Exposure to EMC/EMI testing or familiarity with MIL-STD-461G test methods.
• Experience working in or supporting EMC test lab environments (shielded rooms, anechoic chambers).
• Familiarity with EMC test equipment such as spectrum analyzers, LISNs, current probes, or signal generators.
• Experience with simulation tools (e.g., LTspice, MATLAB, ADS) for filter or signal analysis.

ABOUT THE TEAM

The Air Dominance and Strike (AD&S) Electrical Engineering Team is responsible for developing high-reliability avionics, embedded processing, and power systems for Group 5 air vehicles and missile platforms. Working across hardware, software, and mission autonomy, the team delivers flight-critical electronics, PCB assemblies, and FPGA-based processing architectures that enable Anduril's next-generation autonomous air platforms to operate in complex and contested environments. AD&S Electrical Engineers drive end-to-end development, from system architecture and circuit design to verification, integration, and flight test, ensuring scalable, mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and modern air warfare.

ABOUT THE JOB 

We are looking for an Senior Electrical Engineer to join our rapidly growing team in Costa Mesa, CA. In this role, you will be responsible for end-to-end avionics systems and subsystems development. You will also be working on design, integration, testing, and validation processes. This will require knowledge and experience in PCB design, harnessing, process management, and cross-functional teamwork. If you are looking to join a team in rapid avionics development, then this role is for you.

WHAT YOU’LL DO

• Develop high performance, high efficiency, and highly robust avionics solutions for air vehicle platforms
• Develop reliable on-board communication systems to exchange high bandwidth data across various air and ground assets
• Architect, design, and build high-speed digital PCBAs (schematic capture, simulation, board layout)
• Help decide what to do in-house and what to outsource, communicate design requirements with external vendors and help drive the progress
• Develop relationships with external vendors and communicate design requirements to external vendors and suppliers.
• Work cross-functionally between software, firmware and hardware teams
• Develop hardware validation test plans for sub-system and full system products.

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Electrical Engineering, or a closely related field.
• 8+ years relevant experience in electrical hardware design.
• Experience designing high density PCB layouts with an understanding of cutting-edge PCB manufacturing technology.
• Deep understanding of thermal, mechanical, power and performance tradeoffs.
• Experience with creating test plans, benchmarking and performing validation tests to determine performance of complex hardware systems.
• Understanding of high-speed interfaces (PCIe, DDR, USB, MIPI, etc.), power integrity, and signal integrity.
• Knowledgeable of EMI/EMC susceptibility and emissions along with mitigation experience.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

PREFERRED QUALIFICATIONS

• Experience with high performance SOMs (System On a Module).
• Experience in developing FPGA and ASIC architectures.
• Experience with rapid, hands-on prototyping.
• Skilled at soldering and reworking microelectronic components.
• Knowledgeable in RF investigation and analysis with the use of specialized equipment (Spectrum analyzer, Network Analyzer, etc) and RF simulation tool suites.
• Knowledge of state-of-the-art hardware systems, software tools and algorithms for interfaces required for sensors, actuators, firmware development, and inter-communication bus protocols (CAN-FD, Ethernet, SFP, 1553, etc).
• Experience using Linux command line interface (CLI).

• Setup, execute and analyze test experiments per test procedures and record findings into test records
• Support with builds of test harnesses, racks, and environmental setups
• Improve and update automation, consistency, and coverage per engineering instructions
• Troubleshoot and repair of electrical, electronics and integrated circuits to the component level
• Maintain and calibrate electrical and/or mechanical test equipment
• Create assembly instructions and bill of materials for test equipment and fixtures
• Document test plans, user instructions and manuals
• Operate a clean and safe work environment
• Travel to test sites and external laboratories as required

• 4+ years of electronics testing experience in an R&D environment
• Familiarity with reading electrical system and component schematics
• Familiarity with product development life cycle, reliability, and compliance testing
• Familiarity with electronics test equipment such as power supplies, electronic loads, oscilloscope, function generators, data acquisition and measurement sensors
• Strong root cause analysis skills
• Excellent written, verbal, interpersonal and communication skills
• Able to pivot quickly between tasks and prioritize simultaneous tasks in a fast-paced environment
• Eligible to obtain and maintain an active U.S. Secret security clearance

• 5+ years electronics experience including testing
• Associate degree in Electrical/Electronics, Computer, Mechanical Technologies, or related fields
• Familiarity with IPC Quality Standards, IPC-610, IPC-620, J-STD and other assembly and inspection standards
• Experience with High Voltage and High Power Testing such as propulsion inverters and batteries
• Experience with equipment calibration and metrology
• Experience with electrical compliance testing such as EMI/EMC testing

ABOUT THE JOB

We are looking for an Electrical Engineer to join our rapidly growing team in Costa Mesa, CA. In this role, you will be responsible for end-to-end avionics systems and subsystems development. You will also be working on design, integration, testing, and validation processes. This will require knowledge and experience in PCB design, harnessing, process management, and cross-functional teamwork. If you are looking to join a team in high speed avionics development, then this role is for you.

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent, with 3+ years of experience designing, testing, and troubleshooting complex system designs
• Ability to perform power system and electrical loading analysis, simulation, and testing to determine optimal solutions
• High competence using lab test equipment (benchtop power supplies, electronics loads, oscilloscopes, DMM, logic/spectrum analyzers, etc.) with familiarity of thermal and EMI test chambers and using basic software debugging tools
• Familiarity with common electrical bus interfaces (CAN, I2C, SPI, Ethernet, RS232/422, RS485, USB)
• Exceptional organization and communication skills (both written and oral)
• Eligible to obtain and maintain an active U.S. security clearance
• Experience with power design and power management systems
• Hands-on experience with microcontrollers, including bring-up and design work
• Knowledge of modern analog and digital electronics and electronic circuits
• Experience designing mixed-signal PCBs with multiple layer counts, layer stackup and impedance matching for power and sensor applications, understanding correct grounding approaches and employing appropriate board protections and filtering
• Understanding of low voltage and high voltage power electronics and control systems in order to capture system interconnect diagrams and drive cable harnessing designs with proper wire and connector selection

PREFERRED QUALIFICATIONS

• Hands-on experience designing and integrating electrical systems into high-speed air vehicles or missiles
• Familiar with high end consumer or military embedded systems design
• Experience with power systems including batteries and AC power.
• Develop low-level firmware for bring-up and test
• Background in defense and missile systems.
• Comprehensive understanding of the effects of temperature and vibration on electrical designs

ABOUT THE TEAM

The Air Dominance and Strike (AD&S) Electrical Engineering Team is responsible for developing high-reliability avionics, embedded processing, and power systems for Group 5 air vehicles and missile platforms. Working across hardware, software, and mission autonomy, the team delivers flight-critical electronics, PCB assemblies, and FPGA-based processing architectures that enable Anduril's next-generation autonomous air platforms to operate in complex and contested environments. AD&S Electrical Engineers drive end-to-end development, from system architecture and circuit design to verification, integration, and flight test, ensuring scalable, mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and modern air warfare.

ABOUT THE JOB

We are looking for an Avionics Engineer to join our rapidly growing team in Costa Mesa, CA. In this role, you will be tasked with working closely with avionics engineers to review and design electrical integration details to ensure details are documented and communicated to all relevant stakeholders. If you are someone who thrives in a fast-paced environment supporting new developments, active deployments, and customer operated hardware, we are looking for you.

WHAT YOU WILL DO 

• Full cycle PCB design including collecting requirements, schematic design, component selection, supervision or completion of layout, bring-up, test, debug, and system integration
• Conduct bring-up and design work on microcontrollers, ensuring seamless integration within the system
• Troubleshoot issues that span electrical and software boundaries, utilizing both lab equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools}

ADDITIONAL LEARNING & DEVELOPMENT OPPORTUNITIES

• Work in a fast-paced environment supporting new developments, deployments, and customer operated hardware
• Perform power design, including development and integration of power management systems and components
• Develop payloads and subsystems (sensors, payload interfaces, power management, and networking)
• Create system interconnect diagrams and define wire harnesses that connect electronic equipment within a subsystem
• Collaborate closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional, mission-critical products
• Conduct peer-level and cross-discipline design reviews

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent, with 3+ years of experience designing, testing, and troubleshooting complex system designs
• Ability to perform power system and electrical loading analysis, simulation, and testing to determine optimal solutions
• High competence using lab test equipment (benchtop power supplies, electronics loads, oscilloscopes, DMM, logic/spectrum analyzers, etc.) with familiarity of thermal and EMI test chambers and using basic software debugging tools
• Familiarity with common electrical bus interfaces (CAN, I2C, SPI, Ethernet, RS232/422, RS485, USB)
• Exceptional organization and communication skills (both written and oral)
• Eligible to obtain and maintain an active U.S. security clearance
• Experience with power design and power management systems
• Hands-on experience with microcontrollers, including bring-up and design work
• Knowledge of modern analog and digital electronics and electronic circuits
• Experience designing mixed-signal PCBs with multiple layer counts, layer stackup and impedance matching for power and sensor applications, understanding correct grounding approaches and employing appropriate board protections and filtering
• Understanding of low voltage and high voltage power electronics and control systems in order to capture system interconnect diagrams and drive cable harnessing designs with proper wire and connector selection

PREFERRED QUALIFICATIONS

• Familiar with high end consumer or military embedded systems design
• Experience with power systems including batteries and AC power.
• Develop low-level firmware for bring-up and test
• Background in defense and missile systems.
• Comprehensive understanding of the effects of temperature and vibration on electrical designs.

ABOUT THE TEAM 

The Air Dominance and Strike (AD&S) Electrical Engineering Team is responsible for developing high-reliability avionics, embedded processing, and power systems for Group 5 air vehicles and missile platforms. Working across hardware, software, and mission autonomy, the team delivers flight-critical electronics, PCB assemblies, and FPGA-based processing architectures that enable Anduril's next-generation autonomous air platforms to operate in complex and contested environments. AD&S Electrical Engineers drive end-to-end development, from system architecture and circuit design to verification, integration, and flight test, ensuring scalable, mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and modern air warfare. 

ABOUT THE JOB  

We are looking for an Electrical Test Engineer to join our rapidly growing team in Costa Mesa, CA. In this role, you will work closely with avionics, system, and software engineers to create test systems for development, qualification, verification, and validation purposes. If you are someone who thrives in a fast-paced environment supporting new developments, active deployments, and customer operated hardware, we are looking for you. 

WHAT YOU WILL DO 

• Create test systems to support all phases of product development

• Build up and test of avionics system components through lab, ground, and flight tests 

• Manage concurrent involvement in multiple projects at various stages 

• Participate in design reviews and provide input to identify issues and drive design choices 

• Conduct root cause analysis in support of vehicle integration and field operations 

REQUIRED QUALIFICATIONS 

• Bachelor’s degree in electrical engineering, Mechanical Engineering, or equivalent 

• 3+ years hands on experience in using programming of test software (e.g., PXI, cDAQ, cRIO) 

• 3+ years design experience with NX CAD software for 3D modeling and drafting

• Proficient in designing electrical harnessing for rugged commercial, industrial, aerospace, or military applications 

• Familiarity with common electrical bus interfaces (CAN, Ethernet, RS422, RS232, MIL-STD-1553) 

• Must possess excellent communication skills 

• Eligible to obtain and maintain an active U.S. Secret security clearance 

PREFERRED QUALIFICATIONS 

• Experienced and familiar with aircraft avionics module vendors and avionics component suppliers in UAS programs 

ABOUT THE TEAM  

The Air Dominance and Strike (AD&S) Electrical Engineering Team is responsible for developing high-reliability avionics, embedded processing, and power systems for Group 5 air vehicles and missile platforms. Working across hardware, software, and mission autonomy, the team delivers flight-critical electronics, PCB assemblies, and FPGA-based processing architectures that enable Anduril's next-generation autonomous air platforms to operate in complex and contested environments. AD&S Electrical Engineers drive end-to-end development, from system architecture and circuit design to verification, integration, and flight test, ensuring scalable, mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and modern air warfare.  

ABOUT THE JOB   

We are looking for an Electrical Integration Engineer to join our rapidly growing team in Costa Mesa, CA. In this role, you will work closely with avionics, systems, manufacturing, and flight test teams to support the development and test of air vehicle designs. If you are someone who thrives in a fast-paced environment supporting new developments, active deployments, and customer operated hardware, we are looking for you.  

WHAT YOU WILL DO  

• Create support documentation to include block diagrams, ICD’s wiring interconnect diagrams throughout all phases of product development.  

• Build up and test of avionics system components through lab, ground, and flight tests  

• Manage concurrent involvement in multiple projects at various stages  

• Participate in design reviews and provide input to identify issues and drive design choices  

• Conduct root cause analysis in support of vehicle integration and field operations  

REQUIRED QUALIFICATIONS  

• Bachelor’s degree in electrical engineering, Mechanical Engineering, or equivalent  

• Proficient in designing electrical harnessing for rugged commercial, industrial, aerospace, or military applications  

• Familiarity with common electrical bus interfaces (CAN, Ethernet, RS422, RS232, MIL-STD-1553)  

• Must possess excellent communication skills  

• Eligible to obtain and maintain an active U.S. Secret security clearance  

PREFERRED QUALIFICATIONS  

• Experienced and familiar with aircraft avionics module vendors and avionics component suppliers in UAS programs  

• Experience with Siemens Capital software for 2D modeling and drafting. 

ABOUT THE ROLE

We are seeking an experienced Senior EMC Engineer to join our Air Dominance & Strike Electrical Engineering team. The ideal candidate will be responsible for designing, testing, and validating electromagnetic compatibility (EMC) and electromagnetic interference (EMI) solutions for electronic products. This role involves collaborating with cross-functional teams to ensure compliance with industry standards and regulatory requirements.

WHAT YOU'LL DO

• Conduct EMI/EMC testing and analysis on electronic systems and components.
• Drive product maturity through rapid prototyping, design verification, and qualification activities.
• Develop and implement design strategies to mitigate EMI/EMC issues.
• Prepare test plans, reports, and documentation for compliance verification.
• Collaborate with product design teams to ensure EMC requirements are integrated during the design phase.
• Identify program EMI/EMC risks and define strategies for reducing risk through the definition of modeling, simulation, or experimental activities.
• Stay updated on relevant standards (e.g., MIL-STD-461G, MIL-STD-464D, DOD-160, FCC, CISPR, IEC) and regulatory requirements.
• Conduct field tests and assessments to evaluate product performance in real-world environments.
• Work in a fast-paced environment, having to juggle multiple concurrent projects and customers.

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Electrical Engineering, Electronics, or a related field.
• 7+ years of experience in EMI/EMC design and testing.
• Familiarity with EMC/EMI standards and regulations (e.g., MIL-STD-461G, MIL-STD-464D, RTCA DOD-160, FCC, IEC, CISPR, SAE).
• Proven expertise in E3 design, analysis, testing and mitigation strategies. Specialized in HERO, HEMP, Lightning Protection, ESD, RF exposure limits and operational electromagnetic compatibility.
• Proficiency in using EMI/EMC testing equipment (e.g., spectrum analyzers, oscilloscopes, antennas, LISN etc.)
• Experience with simulation tools (e.g., ANSYS, CST Microwave Studio) for EMI analysis.
• Strong analytical and troubleshooting skills for identifying and resolving EMI/EMC issues.
• Excellent verbal and written communication skills for reporting findings and collaborating with teams.
• Ability to manage multiple projects and meet deadlines in a fast-paced environment.
• Full understanding of PCB Layout techniques to meet mechanical, electrical, EMI/EMC, and manufacturing requirements.
• Ability to read and interpret schematics and apply best practices appropriate for each design.
• Familiarity with standard interfaces such as MIPI, DP, I2C, SPI, PCIe, USB, etc.
• Must be able to obtain and maintain a DoD Secret Clearance 

ABOUT THE TEAM   

The Air Dominance and Strike (AD&S) Electrical Engineering Team is responsible for developing high-reliability avionics, embedded processing, and power systems for Group 5 air vehicles and missile platforms. Working across hardware, software, and mission autonomy, the team delivers flight-critical electronics, PCB assemblies, and FPGA-based processing architectures that enable Anduril's next-generation autonomous air platforms to operate in complex and contested environments. AD&S Electrical Engineers drive end-to-end development, from system architecture and circuit design to verification, integration, and flight test, ensuring scalable, mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and modern air warfare.   

ABOUT THE JOB    

We are looking for an Senior Electrical Integration Engineer to join our rapidly growing team in Costa Mesa, CA. In this role, you will work closely with avionics, systems, manufacturing, and flight test teams to support the development and test of air vehicle designs. If you are someone who thrives in a fast-paced environment supporting new developments, active deployments, and customer operated hardware, we are looking for you.   

WHAT YOU WILL DO   

• Create support documentation to include block diagrams, ICD’s wiring interconnect diagrams throughout all phases of product development.   

• Build up and test of avionics system components through lab, ground, and flight tests   

• Manage concurrent involvement in multiple projects at various stages   

• Participate in design reviews and provide input to identify issues and drive design choices   

• Conduct root cause analysis in support of vehicle integration and field operations   

REQUIRED QUALIFICATIONS   

• Bachelor’s degree in electrical engineering, Mechanical Engineering, or equivalent

• Proficient in designing electrical harnessing for rugged commercial, industrial, aerospace, or military applications   

• Familiarity with common electrical bus interfaces (CAN, Ethernet, RS422, RS232, MIL-STD-1553)   

• Must possess excellent communication skills   

• Eligible to obtain and maintain an active U.S. Secret security clearance   

PREFERRED QUALIFICATIONS   

• 4+ years experience designing and integrating electrical systems into high-speed air vehicles or missiles.

• Experienced and familiar with aircraft avionics module vendors and avionics component suppliers in UAS programs   

• Experience with Siemens Capital software for 2D modeling and drafting.