Position Summary:

IEM is currently seeking a Supplier Quality Engineer for our Jacksonville, FL. locations and will report into the Director of Quality. The top priorities of this position will be to develop and maintain strong relationships with suppliers and vendors, as well as implement Vendor Management program and supporting metrics. Significant involvement with all areas of vendors/suppliers and manufacturing, while also increasing our communication and collaboration with key departments is instrumental in this position.

Please note: This position requires 100% in-office presence in our Jacksonville, FL. offices and does not offer remote work.
 

 ESSENTIAL FUNCTIONS:

• Ensuring suppliers for IEM maintains all regulations and requirements
• Updating the supplier database with continuously updated records of performance
• Creating quality control guidelines and protocols
• Providing advice to vendors on how to reduce defect rates
• Performing logistics tasks, such as communicating with vendors when supplies don’t meet quality standards
• Assessing products and supplies from vendors to ensure their quality
• Creating and promoting strategies to increase the quality and efficiency of systems and products
• Conducting audits of supplier management quality systems
• Acting as a liaison between vendors and company leaders, determining solutions to any challenges to quality standards
• Visiting vendor facilities to ensure they uphold quality standards
• Developing and maintaining relationships with suppliers and vendors
• Oversee and develop process improvements strategies and document
• Develop & implement Vendor Management program and supporting metrics
• Any other related duties in connection with the position including but not limited to:
• Risk Assessments, PFMEA, Six Sigma, 5S, FOD Prevention, Kaizen, IPC Standards
• Understanding of UL, CSA and other regulatory requirements
• Must abide by Health and Safety Rules and have demonstrated commitment to good housekeeping/organizational practices
• Responsible for compliance to company and regulatory standards
• Maintain and develop strong working relationships with other departments outside vendors
• Strive for continuous improvement in all aspects of the work environment, this includes active participation in company committees, project teams and relevant job training
• Commit to self-development goals as discussed with your Vice President and attend company-sponsored training
• Perform other duties as assigned by Vice President
• The candidate will be expected to perform additional duties as assigned to support the team and organization

COMPETENCIES:

• Verbal and written communication proficiency
• Attention to detail
• Thorough compliance knowledge
• Organizational and time management skills
• Reliable with a respect to confidentiality
• Quality management systems
• Root-cause analysis
• Quality Control
• Technical Skills
• Quality Engineering
• Collaboration
• Statistics
• Continual improvement process
• Supply chain experience
• Quality Assurance

EDUCATION AND EXPERIENCE:

• Diploma in relevant field with work experience
• Related experience on Infor Syteline ERP systems
• Advanced proficiency of Microsoft Office applications (Access, Outlook, Excel and PowerPoint)
• Excellent verbal and written communication skills
• Ability to multi-task and prioritize in a fast-paced manufacturing environment
• Understanding of Mechanical Engineering and/or Electrical Engineering and/or Materials Engineering
• Demonstrated career ambition with a track record of growth and increasing responsibility; highly promotable with the potential to take on broader leadership roles within a fast-paced, high-growth organization

PHYSICAL/MENTAL/ENVIRONMENTAL:

Physical Demands:

Activities: Sitting – 70% Walking/Standing – 30% Travel – 30%

Lifting: Must be able to lift up to 10lbs.

Vision: Long periods of close work on computer screen.

Mental Demands: Interpret, analyze, research and handle multiple tasks simultaneously.

Environment: Climate controlled office space 70% with 30% in production areas.

Supplier Quality Engineer 

About Otto Aerospace 
OTTO is developing the world’s first fifth-generation business jet, designed for sustainability through the innovative use of advanced super-laminar aerodynamics and high-precision, net-shaped composites. Flight tests of our technology demonstrator validate a dramatic reduction in fuel burn and allow a sizeable improvement in cabin comfort. Otto Aviation is designing world-class aircraft from first principles physics and delivering ground-breaking aircraft and economic performance. 

 About the Role 

Otto Aerospace is seeking a Sr. Supplier Quality Engineer (SQE) to join our Safety and Quality Assurance Office. The ideal candidate will have experience in developing, implementing, and executing Supplier Quality programs in support of aerospace product development and manufacturing activities. This role will write and maintain supplier-related procedures, including the Supplier Quality Manual and Quality Clauses, and will partner closely with the Supply Chain team to establish strong, collaborative relationships with our suppliers. As a growing startup, the SQE will support internal quality initiatives as needed. This position offers significant opportunities for career growth both vertically and across the organization. 

 The Safety and Quality Assurance Office is responsible for establishing, promoting, and maintaining the highest standards of product safety, regulatory compliance, workplace health and safety, and product quality throughout the design, manufacturing, and operational lifecycle of our aircraft. Operating within a startup environment focused on innovation and growth, our team develops and manages the Safety Management System (SMS), Quality Management System (QMS), Environmental Health and Safety programs (EHS), auditing, training, operational safety, and continuous improvement initiatives. Our mission is to build a culture of proactive risk management, operational excellence, and transparency to ensure that every product and workplace environment meets or exceeds all regulatory, safety, and customer expectations. 

 What You’ll Do 

• Contribute to the development, implementation, and management of the Supplier Quality Management System
• Write and maintain all supplier quality documentation, including the Supplier Quality Manual, supplier-related quality procedures, and quality flow-down clauses for procurement activities
• Work closely with the Supply Chain team to qualify, monitor, and develop suppliers to meet company and regulatory requirements
• Develop and execute supplier audit and surveillance programs
• Support supplier selection, source inspection, first article inspection (FAI), and nonconformance resolution activities
• Coordinate supplier corrective action requests (SCARs) and verify the effectiveness of supplier corrective actions
• Analyze supplier performance data to identify trends and drive continuous improvement initiatives 
• Support internal quality system activities, such as internal audits, root cause investigations, and corrective/preventive actions
• Participate in cross-functional initiatives and support the continuous improvement of companywide quality processes 
• Represent Supplier Quality in internal and external meetings, including supplier reviews and readiness assessments
• Able to travel to supplier locations 25-40% of the time

 Who You Are 

 Education 

• Bachelor’s degree in engineering or a related technical field  

 Experience 

• 3-5+ years of experience in supplier quality engineering in the aerospace or aviation industry

 Required Skills 

• Strong understanding of AS9100, aerospace supplier quality requirements, and quality system development
• Experience developing and writing supplier quality procedures, manuals, and procurement quality clauses
• Ability to conduct supplier audits and assessments against industry standards and internal requirements
• Familiarity with manufacturing processes, inspection techniques, and root cause/corrective action methodologies
• Excellent communication skills and ability to collaborate effectively across functions
• Experience in a startup or fast-paced environment is highly desirable
• Lead Auditor Certification (AS9100 or ISO 9001) preferred
• Experience with PPAP, APQP, FAI, and other advanced quality planning tools
• Hands-on experience with ERP and quality management systems
• Strong organizational skills and the ability to thrive in a dynamic, evolving environment

 Where You'll Be 

This role will be remote with 25% travel until mid/late 2026, at which time it will transition to full onsite in Jacksonville, FL  

 Benefits 

Otto Aerospace provides a robust benefits package that includes competitive salaries, subsidized medical, dental, and vision coverage, 401(k) opportunities, paid short term disability, voluntary long-term disability and additional term life, with 15 paid days off, 15 paid holidays, and paid sick leave. Depending on seniority and role, some roles qualify for potential bonuses and stock options. 

 Otto Aerospace is an Equal Opportunity Employer  

We are committed to diversity, equity, and inclusion in every aspect of our hiring process. All applicants will be considered for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability. We believe that a diverse team brings fresh perspectives, innovative ideas, and greater success. The more inclusive we are, the stronger we become. Applicants must be legally authorized to work in the U.S. 

#LI-Remote

ChenMoore is hiring a Senior Project Manager / Civil Engineering. Candidates should be able to efficiently plan and organize workload, demonstrate success working with a team of professionals, a commitment to quality, good communication skills, and a positive work ethic. The candidate would focus on civil infrastructure (including water and wastewater) utilities, storm water and land development projects for both public and private sector clients. This role will require travel and coordination with professionals from other offices within Florida.

Responsibilities:

• Planning, design, and construction management of civil engineering projects. Projects may include land & site development, water/wastewater infrastructure, and storm water projects for both private and public sector clients.
• Managing activities related to project scope, schedule, cost, quality, communications, resources, and risk elements to optimize client service, quality, and fiscal responsibility.
• Project outlines, project initiation, project schedules, project executions, and project closeout
• Lead specification and contract document preparation including permitting, and stakeholder involvement.
• Manage day-to-day activities of project engagements including clients and project teams.
• Successfully interface with multi-disciplinary design teams
• Achieve project objectives including quality/scopes, budgets, and schedules.
• Mentor engineering staff.
• Assist in marketing business opportunities with key clients and development of responses to RFPs/RFQs
• Develop and maintain continuing business relationships with clients as part of ongoing business development efforts.
• Participate in local water and wastewater, and other professional organizations.

Qualifications:

• Must possess a bachelor’s degree in civil or environmental engineering; a master’s degree is a plus.
• 8+ years of relevant experience is preferred. Less experienced candidates shall be considered.
• Professional Engineer (PE) license in the State of Florida is required.
• Excellent technical writing skills
• Strong client relationship skills
• Outstanding organizational skills
• Strong sense of urgency, project responsibility and initiative
• Ability to work independently and as part of a team.
• Excellent verbal, written and interpersonal skills.

Position Overview 

The RAN Deployment Engineer is responsible for executing all deployment, installation, and integration activities required to enable stable satellite‑to‑mobile connectivity across India and within global delivery programs. This role supports gateway and cell‑site builds, performs beam surveys, validates field installations, uploads configurations, and conducts probe‑based integration checks to ensure RAN readiness for satellite network activation. 

The position works closely with regional engineering teams, the NOC, vendors, and global deployment groups to resolve technical blockers, uphold high integration quality, and support seamless service enablement. 

Operating at the intersection of field engineering and advanced satellite‑RAN deployment, this role demands precision during installation, disciplined validation practices, and continuous coordination with cross‑functional teams. The RAN Deployment Engineer must balance technical accuracy, operational urgency, and regulatory variations across India to ensure smooth and consistent readiness for global satellite network activation.

Key Responsibilities 

Field Deployment & Installation Activities 

• Deliver RAN deployment activities including cell‑site builds, managing end-to-end field installation processes for satellite-RAN infrastructure 

• Execute installation checks and commissioning procedures to validate proper equipment mounting, cabling, power connections, and environmental controls 

• Validate CIQ inputs/outputs and CIQ-to-SCF generation to avoid deployment rework 

• Validate Cell site router to Core integration, transport readiness 

• Perform configuration uploads and software provisioning to ensure RAN equipment is properly configured according to deployment specifications 

• Perform and validate BPMS to eNB port mapping, transport, clocking, and interface readiness 

• Support Beam Go / No-Go readiness reviews and provide technical sign-off inputs 

• Own technical handover from Delivery to Service Acceptance, ensuring all acceptance criteria and artifacts are met 

• Enable stable satellite‑mobile connectivity through systematic installation, integration, and validation of RAN components and interfaces 

Technical Validation & Testing 

• Perform probe validations and acceptance testing to verify RAN functionality, connectivity, and performance against established criteria 

• Conduct integration testing between satellite-RAN equipment and terrestrial network components to ensure seamless connectivity 

• Execute acceptance tasks including functional testing, performance validation, and documentation completion for site commissioning 

• Execute Acceptance checks with vendors for handover to Service Acceptance 

Coordination & Collaboration 

• Coordinate with regional engineering, NOC, vendors, and global deployment teams to align deployment activities with project schedules and technical requirements 

• Interface with network operations centres to ensure proper monitoring integration and operational readiness during deployment phases 

• Work with vendor teams to resolve equipment issues, on site hardware delivery, coordinate software updates, and ensure proper installation procedures 

• Collaborate with global deployment teams to maintain consistency in deployment standards and share lessons learned across regions 

Technical Issue Resolution & Quality Assurance 

• Resolve technical blockers encountered during deployment including equipment failures, configuration issues, and integration challenges 

• Troubleshoot complex technical problems affecting RAN performance, connectivity, or functionality during installation and commissioning 

• Ensure reliable RAN readiness supporting global satellite network activation through comprehensive validation and quality assurance processes 

• Document and escalate unresolved issues to appropriate technical teams while implementing temporary workarounds to maintain deployment schedules  

Qualifications  

Education 

• Bachelor's degree in electrical engineering, telecommunications engineering, computer engineering, or related technical field 

• Associate degree with relevant telecommunications experience accepted  

Experience 

• Minimum 4+ years in telecommunications field deployment, network installation, or wireless infrastructure commissioning 

• 2+ years hands-on experience with RAN deployment, cell site installation, or wireless network infrastructure and CIQ handling 

• Proven experience with field installation, testing, and commissioning of complex telecommunications equipment  

Required Technical Expertise 

• Strong understanding of RAN technologies, wireless communications principles, and telecommunications infrastructure 

• Knowledge of installation procedures for telecommunications equipment including Rack, eNodeB antennas, transceivers, GPS & CSR and network infrastructure 

• Familiarity with configuration management, software provisioning, and equipment commissioning processes  

Preferred Qualifications 

• Experience with satellite communications systems, satellite-RAN integration, or space-terrestrial network deployment 

• Background in field deployment roles at wireless carriers, equipment vendors, or telecommunications contractors 

• Knowledge of safety procedures and compliance requirements for telecommunications field work 

• Experience with network monitoring systems and performance validation tools 

• Familiarity with project coordination and deployment management practices  

Professional Skills 

• Strong problem-solving and troubleshooting skills for complex technical issues in field environments 

• Excellent communication skills for coordination with multiple technical teams and stakeholders 

• Proven ability to work independently in field environments while maintaining safety and quality standards 

• Experience with technical documentation, test reporting, and deployment validation procedures  

Technology Proficiency 

• Proficiency with RF testing equipment including spectrum analysers, power meters 

• Experience with network configuration tools and equipment management systems 

• Familiarity with field measurement software and data collection tools used in wireless deployment 

• Knowledge of safety equipment and procedures required for telecommunications field work  

Skills & Competencies 

• Field Installation Expertise: Hands-on experience with telecommunications equipment installation, cabling, and commissioning procedures 

• RF Testing & Validation: Proficiency with RF measurement equipment and wireless network performance validation techniques 

• Technical Troubleshooting: Systematic approach to identifying and resolving complex technical issues in field environments 

• Safety Consciousness: Commitment to safety procedures and compliance with telecommunications industry safety standards 

• Documentation & Reporting: Clear technical writing and accurate documentation of deployment activities and test results 

• Team Coordination: Effective collaboration across multiple technical disciplines and organizational boundaries  

Cross-Functional Interfaces 

This role collaborates regularly with: 

• Internal: Regional Engineering Teams, Network Operations Center, RF Engineering, Field Operations, Quality Assurance, Program Management, Safety and Compliance 

• External: Equipment vendors, installation contractors, testing laboratories, site owners, local regulatory authorities  

Physical Requirements 

• Role will be based in United States with extensive travel for field deployment activities across multiple regions (~50%) 

• Ability to perform physical field work including equipment installation,  

• Valid driver's license and ability to travel to remote deployment sites as required by project schedules 

• Ability to work flexible hours including weekends and extended shifts during critical deployment phases 

This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands. 

Position Summary:

The Lead Manufacturing Engineer / Manufacturing Engineering Manager will oversee and optimize manufacturing processes for the Cover Glass Integrated Solar Cell (CIC) production line. This role focuses on improving yield, throughput, process reliability, and equipment efficiency and managing production line personnel. This position will lead cross-functional teams, drive continuous improvement initiatives, and ensure compliance with safety and quality standards.

Key Responsibilities:

• Process Development & Optimization:
• Lead development, qualification, and scaling of processes for cover glass lamination, laser cutting, interconnect integration, and solar cell encapsulation.
• Implement Design for Manufacturability (DFM) principles for new product introductions (NPI).
• Perform root cause analysis and implement corrective actions for process deviations and yield loss.
• Production Support:
• Provide hands-on technical support to resolve day-to-day production issues across the CGISC line.
• Maintain and improve key process parameters (KPPs) to ensure consistent quality and throughput.
• Lead troubleshooting and failure analysis of mechanical and process equipment.
• Equipment & Tooling:
• Specify, procure, and qualify production equipment and fixtures.
• Collaborate with equipment vendors for installation, calibration, and maintenance strategies.
• Leadership & Collaboration:
• Lead engineering teams and mentor junior engineers and technicians.
• Interface with R&D, Quality, Supply Chain, and Maintenance to align manufacturing goals with broader company objectives.
• Lean & Continuous Improvement:
• Apply Lean Manufacturing, Six Sigma, and SPC methods to reduce waste and improve line efficiency.
• Develop and sustain Standard Operating Procedures (SOPs) and Work Instructions.
• Data & Reporting:
• Analyze process data to monitor trends, detect abnormalities, and drive decisions.
• Generate technical documentation, process maps, and reports for stakeholders.

Qualifications:

• Bachelor’s or Master’s degree in Mechanical Engineering, Manufacturing Engineering, Materials Science, or related field.
• 5–10 years of experience in high-tech manufacturing, preferably in photovoltaic, semiconductor, or display panel industries.
• Strong knowledge of glass processing, solar module assembly, laser operations, or thin-film technology.
• Experience with statistical analysis tools (JMP, Minitab), MES systems, and CAD software, or similar.
• Demonstrated leadership in cross-functional project management and production scaling.

Preferred Skills:

• Familiarity with ISO 9001, ISO 14001, or similar quality/environmental standards.
• Knowledge of automation systems, robotics, and cleanroom manufacturing.
• Hands-on experience with FMEA, DOE, and SPC implementation.

Work Environment:

• Split between cleanroom manufacturing floor and engineering office.
• Occasional travel to vendor or partner facilities as required.
• Occasional off-hours support for shift operations or emergencies.

Job Summary:

The Quality Engineer is responsible for ensuring that all components and processes in the Cover Glass Integrated Solar Cell Production Line meet internal quality standards and customer specifications. This includes planning, implementing, and monitoring quality control systems, investigating issues, and driving continuous improvement initiatives to enhance product reliability and production efficiency.

Key Responsibilities:

• Quality Control & Assurance:
• Develop and implement quality control procedures for the cover glass lamination, cell integration, laser processing, and encapsulation steps.
• Monitor process quality through in-line inspection, SPC (Statistical Process Control), and end-of-line testing.
• Ensure compliance with ISO 9001 and other relevant quality standards.
• Inspection & Testing:
• Define and oversee inspection criteria for incoming materials (glass, interconnects, encapsulants) and finished products.
• Coordinate root cause analysis for non-conforming materials or processes using tools such as 5 Whys, Fishbone (Ishikawa), and FMEA.
• Use metrology tools (e.g., microscope, profilometer, solar simulator) to verify process integrity.
• Documentation & Reporting:
• Maintain accurate documentation for quality records, audits, deviations, and CAPAs (Corrective and Preventive Actions).
• Generate quality reports and dashboards to track KPIs such as yield, defect rates, and rework costs.
• Process Improvement:
• Collaborate with R&D, production, and engineering teams to optimize manufacturing processes and reduce variability.
• Lead or support Six Sigma or Lean Manufacturing initiatives to improve product quality and manufacturing efficiency.
• Audits & Compliance:
• Participate in internal and external quality audits.
• Ensure compliance with environmental, safety, and product certification standards applicable to solar panel production.

Qualifications:

• Bachelor’s degree in Mechanical Engineering, Materials Science, Electrical Engineering, or related field.
• 2–5 years of quality engineering experience in a high-tech manufacturing environment (solar, semiconductor, glass, or electronics preferred).
• Working knowledge of quality tools (SPC, DOE, FMEA, MSA).
• Familiarity with standards such as ISO 9001, IEC 61215/61730 for solar cells/modules.
• Experience with root cause analysis and continuous improvement methodologies.
• Strong analytical, communication, and documentation skills.

Preferred Skills:

• Experience with optical inspection systems or laser processing quality control.
• Proficiency in using quality software such as Minitab, JMP, or similar.
• Green Belt or higher in Six Sigma is a plus.
• Familiarity with cleanroom protocols and ESD safety.

Job Summary:

The Environmental Test Engineer (Vibration and TVAC) is responsible for planning, executing, and documenting mechanical and thermal-vacuum tests to verify the environmental durability of spacecraft components, subsystems, and full systems. This engineer ensures test campaigns meet customer and program requirements for qualification and acceptance.

Key Responsibilities:

• Develop and execute test plans and procedures for vibration (sine, random, shock) and thermal vacuum (TVAC) testing.
• Set up, calibrate, and operate test equipment including shakers, thermal chambers, vacuum chambers, and data acquisition systems.
• Collaborate with design, manufacturing, and systems engineering teams to define environmental test requirements.
• Perform real-time test monitoring and troubleshooting to ensure successful completion of test campaigns.
• Ensure all testing complies with relevant standards (e.g., MIL-STD-1540, NASA GEVS, ECSS).
• Coordinate with technicians to configure test setups, instrumentation, and test article fixturing.
• Lead or support root cause investigations for test anomalies or failures.
• Generate detailed test reports including data analysis, plots, and pass/fail criteria.
• Maintain equipment and ensure test facilities meet operational readiness.
• Participate in continuous improvement activities to enhance test efficiency, safety, and reliability.

Required Qualifications:

• Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, or related field.
• 3+ years of experience in environmental testing, preferably in aerospace or defense.
• Hands-on experience with electrodynamic shakers, TVAC chambers, accelerometers, thermal sensors, and DAQ systems.
• Strong knowledge of vibration and thermal environments relevant to spaceflight hardware.
• Familiarity with instrumentation setup, calibration, and data analysis.
• Ability to work in cleanroom environments and follow contamination control procedures.
• Excellent written and verbal communication skills.
• Strong analytical and problem-solving abilities.

Preferred Qualifications:

• Experience with software such as LabVIEW, TestStand, MATLAB, or Python for test automation and data analysis.
• Experience supporting launch vehicle or satellite environmental qualification campaigns.
• Knowledge of industry standards: MIL-STD-810, MIL-STD-1540, ECSS-E-ST-10-03C, etc.
• Familiarity with thermal modeling and simulation tools.

Working Conditions:

• May involve shift work and extended hours during test campaigns.
• Physical requirements may include lifting up to 50 lbs and working in confined or high-vacuum areas.
• Must be able to work in a fast-paced and collaborative environment with strict deadlines.

Position Summary:
We are seeking a highly skilled Battery Pack Engineer to support the design, assembly, testing, and production optimization of advanced battery packs. The ideal candidate will have hands-on experience in battery pack assembly, be familiar with Arbin battery cyclers for performance testing, and have expertise in Amada and Hesse welding machines for precision welding of battery interconnections and busbars. This role involves working closely with production teams, quality engineers, and R&D to ensure high reliability and performance of battery systems.

Key Responsibilities:

• Design & Development:
• Support the development and optimization of battery pack designs, layouts, and electrical schematics.
• Define process parameters for welding, joining, and bonding operations for battery modules.
• Collaborate with R&D on cell selection, pack configuration, and system integration.
• Production Support:
• Oversee battery pack assembly processes, ensuring adherence to quality standards and production schedules.
• Operate and maintain Amada and Hesse welding machines for busbar and tab welding, ensuring proper weld quality and consistency.
• Define and maintain SOPs, process documentation, and assembly work instructions.
• Testing & Validation:
• Perform battery cell and pack testing using Arbin cyclers, including charge/discharge cycling, capacity verification, and performance characterization.
• Support failure analysis, root cause investigations, and corrective actions for battery performance issues.
• Assist in battery safety, environmental, and reliability testing as per industry standards.
• Quality & Safety:
• Ensure compliance with ISO, IATF, and other relevant quality management standards.
• Implement quality control measures for welding joints, electrical connections, and thermal management components.
• Enforce ESD and high-voltage safety protocols during production and testing activities.
• Continuous Improvement:
• Identify opportunities for process automation, efficiency improvement, and cost reduction.
• Provide feedback to equipment and process engineering teams for ongoing optimization.

Qualifications & Skills:

• Education: Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Materials Science, or a related field.
• Experience:
• 2+ years of hands-on experience in battery pack design, assembly, or testing.
• Direct experience with Arbin battery test equipment and Amada welding systems (laser or resistance welding).
• Strong understanding of lithium-ion battery technology, cell balancing, and BMS integration.
• Technical Skills:
• Proficiency in interpreting electrical schematics, CAD drawings, and mechanical assembly diagrams.
• Knowledge of welding parameters (current, pressure, pulse) and weld inspection criteria.
• Familiarity with data acquisition, test data analysis, and failure mode analysis (FMEA).
• Soft Skills:
• Strong problem-solving and troubleshooting skills.
• Ability to work collaboratively in a cross-functional production environment.
• Excellent documentation, communication, and reporting skills.

Summary:

The Associate Electrical Test Engineer is responsible for the development and execution of tests to ensure the quality of our products. Additionally, is responsible for analyzing the product features, test requirements, creating customized quality checks, and writing up final test procedures for the approval of the sub-system lead engineer. Test engineer is also responsible for the execution of the test procedure as well as for preparing the test report. Broad-based knowledge of engineering and product design, a good eye for detail, and the ability to think out of the box are important requirements for this role.

Duties and Responsibilities:​ 

• Meeting with the product design team and sub-system lead engineers to determine product testing requirements.
• Writing test plans, test procedures and developing test processes to maturity.
• Execution of the test procedure.
• Training of technical staff and providing technical support when needed.
• Development, evaluation and implementation of automation into test processes wherever possible.
• Ensuring all tests and procedures meet company and industry standards.
• Preparing test reports for management.
• Providing subject-matter expertise on test equipment and methods to product engineering teams.

Minimum Qualifications: 

• Bachelor’s degree in Electrical, Mechatronics, Aerospace or Computer engineering field or Associates Degree in Electrical Engineering with 2 years of direct experience
• Flexibility/adaptability in a fast-paced & dynamic environment.
• Excellent English written and verbal communication skills.
• U.S Citizen or Permanent Resident.
• Must be able to read, write, and speak English. 

Preferred Qualifications: 

• Experience in a research, development, test or other laboratory environment.
• Experience with common laboratory software (LabView, Ansys, MATLab etc).
• Experience with test automation.
• Familiarity with general purpose electronics test equipment: power supplies, digital multimeters, source meters.
• Familiarity with battery systems, and battery cycling equipment.
• Familiarity with photovoltaic (PV) solar cells and their design, test or manufacturing processes.
• Familiarity with environmental test chambers, vibe table.
• Experience in quality control or inspection of complicated electronics, particularly those used for aerospace or defense applications.
• Good problem-solving skills and ability to troubleshoot complicated systems.

PURPOSE OF POSITION

The Test Engineer is responsible for designing, developing, and executing test procedures for IEM products and components. This role ensures product quality and performance by analyzing test results, identifying issues, and leading extensive troubleshooting efforts, while supporting the development of robust test processes and driving continuous improvement across the test organization.

ESSENTIAL FUNCTIONS

• Design and develop test procedures and protocols.
• Execute functional and electrical testing on products and components.
• Collaborate with engineering and production teams to resolve product issues.
• Analyze test data and identify trends, issues, and root causes.
• Develop and improve testing methods and processes.
• Support troubleshooting and failure analysis.
• Ensure compliance with safety standards and testing procedures.
• Maintain accurate test documentation and reports.
• Perform other duties as assigned.
• Relay protection and trip function testing.
• Troubleshoot and resolve wiring errors, component failures, and control logic issues.
• Recommend upgrades or new test technologies to improve accuracy, capability, and efficiency.
• FWT Support (Factory Witness Testing).
• Provide technical explanations, perform test demonstrations, and address questions or issues that arise during FWT events.

SUPERVISION OF PERSONNEL

None.

COMPETENCIES

• Strong understanding of electrical systems and testing methods.
• Experience developing test plans, drawings, and technical documentation.
• Ability to read and interpret schematics and technical drawings.
• Experience with lean or Six Sigma methodologies is a plus.
• Experience with automated test systems (LabVIEW, Python, NI, etc.)
• Familiarity with PLC systems or embedded systems testing.
• Background in high-reliability industries (aerospace, defense, medical devices).
• Attention to detail and documentation accuracy.
• Clear and professional communication.
• Safety-conscious behavior with strict adherence to NFPA 70E and departmental safety standards.
• Problem-solving and analytical thinking.

EDUCATION AND EXPERIENCE

• Associate’s or Bachelor’s degree in Electrical Engineering or related field preferred.
• 4+ years or experience in testing, engineering, or related field.

PHYSICAL / MENTAL / ENVIRONMENTAL

Physical Demands:

Activities: Sitting, Walking/Standing

Lifting: Frequently lift to 50 lbs.

Bending: Must be able to bend, squat, crawl, and climb.

Vision: Long periods of close work on a computer screen; ability to see small or detailed items.

Mental Demands: Interpret, analyze, research, and handle multiple tasks simultaneously.

Environment: Shop/warehouse. Not climate controlled. Exposure to excessive heat and cold, wet/humid conditions, noise/vibration, hazards, dust, and fumes.

PURPOSE OF POSITION:

The purpose of the Continuous Improvement Engineer, IEM360 role is to provide high-impact support role responsible for deploying and sustaining our enterprise-wide operating system across functions and sites. Modeled on world-class systems such as the Danaher Business System and Crane Business System, IEM360 is IEM’s framework for driving continuous improvement, lean enterprise transformation, and strategic execution. The IEM360 CI Engineer partners with functional and plant leaders to drive measurable improvements in Safety, Quality, Delivery, Cost, and Growth.

SUPERVISORY RESPONSIBILITIES:

• This position has no direct supervisory responsibilities.
• The position requires collaboration with other roles to drive measurable improvements in Safety, Quality, Delivery, Cost, and Growth.

ESSENTIAL FUNCTIONS:

• Lead IEM360 Deployment: Drive the implementation of IEM Business System tools and processes across operations, supply chain, engineering, and commercial functions, ensuring alignment with strategic objectives.
• Kaizen Facilitation: Plan, lead, and coach cross-functional kaizen events focused on lean fundamentals, standard work, visual management, flow, problem-solving, and strategic growth/capacity initiatives.
• Capability Building: Develop internal capability by training and coaching team members and leaders at all levels in lean thinking, daily management, and continuous improvement practices.
• Business System Maturity: Assess business system maturity across plants and functions; create and execute improvement roadmaps using tools such as maturity models, Hoshin Kanri, tiered daily management, and KPI dashboards.
• Change Leadership: Act as a catalyst for cultural transformation, enabling teams to embrace standardization, accountability, and data-driven decision-making.
• Performance Management: Partner with site leadership to embed IEM360 into key processes such as policy deployment (Hoshin), S&OP, new product introduction, and operational reviews.
• Best Practice Sharing: Identify, document, and disseminate internal best practices. Benchmark against external best-in-class organizations and adapt appropriately for IEM.

COMPETENCIES:

• Proven ability to work independently, take initiative, and manage responsibilities with minimal supervision.
• Hands-on leader and coach; thrives on the shop floor and in frontline engagement.
• High emotional intelligence with the ability to influence without authority.
• Comfortable navigating ambiguity and building structure in evolving organizations.
• Results-driven, with a bias for action and accountability.
• Excellent verbal and written communication skills
• Strong analytical and problem-solving abilities
• Excellent interpersonal and customer service skills.
• Excellent organizational and time management skills and attention to detail.
• Proficient in Microsoft Office Suite or related software

EDUCATION AND EXPERIENCE:

• Bachelor’s degree in engineering, Business, Operations, or a related field; MBA or Master’s preferred.
• 3-5 years of experience in manufacturing, operations, or continuous improvement, preferably in a multi-site or matrixed industrial environment.
• Deep understanding of Lean principles (e.g., 5S, value stream mapping, standard work, visual management, PDCA, SMED, A3 problem-solving).
• Demonstrated success leading cross-functional kaizen events and system-wide CI initiatives.
• Understanding of basic ops finance, including P&L impact, cost drivers, and fixed vs. variable costs
• Strong facilitation, project management, and communication skills.
• Experience working in or with a formal business system (e.g., DBS, CBS, strongly preferred)
• Exceptional communication and interpersonal skills with the ability to influence stakeholders at all levels.

PHYSICAL/MENTAL/ENVIRONMENTAL:

Willingness to travel (~25%) across IEM’s manufacturing locations.

Physical Demands: Activities: Sitting – 60% Walking/Standing – 40%

Lifting: Must be able to lift up to 20lbs.

Vision: Long periods of close work on a computer screen.

Mental Demands: Interpret, analyze, research and handle multiple tasks simultaneously.

Environment: Climate controlled office and non-climate-controlled production floor.

Position Summary:

IEM is currently seeking a Manufacturing Engineer for our Jacksonville, FL location and will report into the Senior Manager of Manufacturing Engineering. We are seeking a hands-on and detail-oriented Manufacturing Engineer with experience working in a medium to high-mix volume manufacturing environment. This role is responsible for driving process improvements, implementing standard work, and leading continuous improvement initiatives using structured problem-solving and Kaizen methodologies. The ideal candidate thrives in a fast-paced, team-oriented setting and has a passion for lean manufacturing and operational excellence.

Key Responsibilities:            

• Design, optimize, and implement manufacturing processes to improve quality, efficiency, and safety.
• Lead and participate in Kaizen events, root cause problem solving (8D, A3, DMAIC), and continuous improvement projects.
• Develop and maintain standard work instructions for production processes.
• Use data-driven analysis (SPC, Pareto, time studies) to identify and resolve process bottlenecks or defects.
• Collaborate with cross-functional teams including Quality, Operations, and Supply Chain to introduce new products and process changes.
• Support equipment selection, process validation, and layout optimization for lean flow.
• Lead PFMEA, control plans, and risk assessments for manufacturing processes.
• Ensure processes comply with quality, safety, and environmental standards.
• Train and mentor operators and technicians on process changes and lean tools.

Qualifications:

• Bachelor's degree in Mechanical, Industrial, or Manufacturing Engineering (or related technical field).
• 3–7 years of experience in a manufacturing or process engineering role. Proven experience with Kaizen, standard work, time studies, line balancing, material flow, and structured problem-solving tools (A3, 5-Why, Fishbone, PDCA, etc.).
• Strong working knowledge of Lean Manufacturing and/or Six Sigma principles.
• Experience with ERP/MES systems, engineering change control, and work instruction platforms.
• Demonstrated career ambition with a track record of growth and increasing responsibility; highly promotable with the potential to take on broader leadership roles within a fast-paced, high-growth organization
• Proficient in Microsoft Office and engineering tools such as AutoCAD, SolidWorks, or equivalent.
• Strong interpersonal, facilitation, and communication skills.

Preferred Qualifications:

• Lean/Six Sigma certification (Green Belt or higher).
• Experience in electrical equipment, assembly-based, or industrial manufacturing environments.
• Familiarity with ISO 9001 or related quality management systems.

IEM is currently seeking a Quality Engineer - Customer Account Manager for our Jacksonville, FL or Surrey, B.C offices and will report into the VP of Quality & Reliability. As a Quality Engineer – Customer Account Manager, you will be the primary point of contact for the Customer and Commercial Teams about quality-related issues. Collect root cause analysis data and provide corrective feedback due to quality issues. Responsible for ensuring that the products produced meet quality standards required to minimize quality costs and maximize customer satisfaction whilst ensuring that procedures and processes are adhered to. Ensure incoming materials meet required quality standards. Support new product introductions to ensure the robustness of product. Work in a team environment to develop and implement best practices that emphasize defect prevention, reduction in variation and waste and provide for continuous improvements in meeting all customer requirements. Manage the customer specific requirements and coordinate technical support. Work on many phases or sub-tasks of projects or entire projects of moderate complexity, with results impacting on project completion. Work mostly independently under general supervision, reviewed at project milestones and/or on completion by Senior Management.

Please note: This position requires 100% in-office presence and does not offer remote work.

Key Responsibilities:

• Build strong, working relationships with customer and in-house commercial teams to ensure complete and transparent communication and support.
• Coordinate activities to evaluate and resolve sometimes technically challenging engineering and quality-related problems encountered in the customer’s facility
• Determine and collect relevant data for product and installation improvements to understand any problems and decide when to appropriately escalate issues
• Investigate reports of defective, damaged or malfunctioning parts, assemblies, equipment or systems to determine nature and scope of problem that the customer is experiencing
• Initiate containment of stock at all locations and prevent further nonconforming production
• Investigate the fault and extent of potential recall
• Examine defective part for conformance to engineering design drawings or specifications
• Identify anomalies on engineering drawings back to the design function
• Maintain records to oversee recording of information by others to ensure engineering drawings and documents are current and that engineering related production problems and resolutions are documented
• Provide feedback to company on what the issues are
• Evaluate findings to formulate corrective action plan and coordinate implementation
• Control clean cut-offs throughout and ensure containment is managed while on-going corrective actions are implemented
• Organize any re-work of finished goods that may be necessary
• Report into the customer what the root causes were to quality issues, the containment measures and corrective actions taken to ensure resolution
• Review engineering specifications, orders and related information to maintain current knowledge of manufacturing methods, procedures and activities
• Assist with training of quality awareness
• Monitor and report on Key Performance Indicators (KPIs) in order to adhere to process and prevent occurrence of any non-conformity relating to product, process or system
• Assist with new product introduction, representing the customer and support and manage pre-production trial runs and first off sample approvals
• Promote the use of customer preferred techniques for continuous improvement such as Six-Sigma, Poka-Yoke (Error Proofing), Kaizen
• Participate in the development and refinement of Design and Process FMEA’s (Failure Mode and Effects Analysis) and represent the customer’s views
• Manage and coordinate customer PPM, DO, DPU, cost recovery and supplier warranty indicators
• Keep up with current and developing manufacturing and engineering trends that concern the customer’s product
• Contribute to continuous improvement activities
• Quality control of work by appropriate reviews
• Support and lead process improvement activities
• Write reports and present progress at project meetings and to clients
• Plan projects or subtasks so they may be tracked and presented
• Perform root cause analysis and resolve problems
• Provide advice and guidance to management teams as required
• Provide support to all internal departments to maintain and improve product quality
• Communicate efficiently with IEM and customer’s management
• Liaise and communicate with other departments, customers, and other service providers
• Participate in cross-functional teams in the development of new products or changes related to current products in meeting customer requirements
• Develop quality relationships with the customer
• Comply with the Health, Safety and Environmental Policies both in-house and at the customer
• The candidate will be expected to perform additional duties as assigned to support the team and organization

Qualifications:

• Bachelor's in Business/Commercial or Manufacturing/Engineering degree preferred
• Minimum of 5 years of experience in Quality Assurance
• Demonstrated experience of 3 to 5 years in engaging with customers and suppliers
• Previous experience in a manufacturing environment
• Ability to work independently with minimal supervision
• Proficient in 8D, CARs, and quality systems
• Knowledgeable in Lean Manufacturing, APQP, PPAP, FMEA
• Familiarity with ISO9001
• Understanding of engineering drawings and manufacturing processes
• Adaptability to diverse and dynamic environments
• Strong planning and prioritization skills
• Effective communication, negotiation, and presentation abilities
• Proficient problem-solving skills
• Understanding of Health and Safety practices
• Team player with analytical skills
• Awareness of cost and financial impacts
• Commercial and financial awareness is advantageous
• Understanding of customer expectations and of quality failure/cost
• Demonstrated career ambition with a track record of growth and increasing responsibility; highly promotable with the potential to take on broader leadership roles within a fast-paced, high-growth organization

Compensation actually offered for this role will take into account internal equity and also may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered. 

[Surrey, B.C. Compensation Range: CAD 34.62/hr - 56.25/hr] 
[Jacksonville, FL Compensation Range: $85,000 - 125,000] 

Position Summary

The R&D Mechanical Engineer (Level I- Sr.) is responsible for collaborating or leading the design, testing and certification of innovative electrical power products in collaboration with a diverse team of electrical, mechanical and manufacturing engineers. This role requires a strong intuition of fundamental engineering concepts across multiple disciplines and an ability to effectively manage the product development process under limited direction.

Key Responsibilities

• Ensure the execution and implementation of the New Product Introduction (NPI) engineering work for assigned projects.
• Collaborate with Senior and Lead Engineers in writing detailed engineering specifications and developing concept drawings in collaboration with Sales and other stakeholders.
• Coordinate with Nationally Recognized Testing Laboratories (NRTLs) to define product evaluation and certification scope.
• Lead the creation of detailed design drawings, 3D models and bills of material for prototype equipment and test articles.
• Develop and document test plans according to the relevant standards. Common tests include full-load temperature rise, dielectric and BIL, short-circuit and withstand current, mechanical endurance, component failure, environmental, functional and seismic shake-table tests.
• Support the testing process at in-house and third-party laboratories. Travel up to 20% to support testing and other product development tasks in-person. Evaluate test results and revise designs based on empirical data and established engineering concepts.
• Characterize the electrical, thermal and mechanical performance of common design elements through testing, simulation and/or analytical methods. Develop standard design criteria and models.
• Work closely with manufacturing engineering to implement Design for Manufacturability (DFM) concepts throughout the new product development process.
• Working with Mechanical Designers,
• Conduct failure analyses of existing products and identify opportunities for continuous improvement

Qualifications

• Minimum 3 years of experience designing low and/or medium voltage power distribution equipment or related products.
• BSME or equivalent in experience.
• Experience with NRTL (UL, CSA, etc.) evaluation, testing and certification processes.
• Experience with common standards for electrical equipment (UL 891, 1558, 508A; IEEE C37.20, etc.)
• Design Experience using SolidWorks to produce 3D models is highly preferred.

Location: South Bay, Florida

Travel: 75%

Position Summary

The Project Engineer I is an entry-level role supporting both office and field operations by assisting with project planning, coordination, documentation, and execution in alignment with budget, schedule, and contract requirements. This position applies engineering principles in soils mechanics, hydraulics, structural theory, and surveying while gaining hands-on field experience. Working closely with project managers, superintendents, and field teams, the Project Engineer I ensures project efficiency, compliance, and quality while upholding Forgen’s Core Values and safety culture.

Forgen Overview

Forgen is a leading geotechnical and specialty civil construction company operating across North America. We are dedicated to delivering innovative solutions for complex civil, geotechnical, and environmental challenges, guided by our core values of integrity, passion, teamwork, and smart work.

Key Responsibilities

Office Tasks:

• Assist in the development of project cost estimates, proposals, and material take-offs.
• Perform technical analysis of the remediation methodologies of various previously remediated projects.
• Perform other administrative or office duties as required or as assigned.
• Travel to project sites as necessary for extended durations.
• Adhere to all federal, state, and local regulations.

Field Tasks:

• Preparing project submittals.
• Maintaining project record documents.
• Perform technical review of contract plans and specifications.
• Provide oversight and documentation related to project quality control in accordance with the contract plans, specifications, and company policies and procedures.
• Preparing daily construction reports and progress tracking.
• Manage, interpret, and perform site surveying.
• Assist with the management of subcontractors.
• Assist with the procurement or rental of equipment and materials.
• Assist Project Manager with project daily cost reporting and tracking.
• Perform additional assignments and special projects as directed.

Basic Qualifications

• Bachelor’s degree in Civil Engineering, Construction Management, or a related field.
• 0-3 years of experience in construction or engineering.
• Proficiency in Microsoft Office and basic project management software.
• Ability to read and interpret construction documents.
• Strong organizational and communication skills.
• Valid driver’s license, ability to drive for the company.

Preferred Qualifications

• Internship or co-op experience in construction or engineering, specifically site surveying, earthwork, In-Situ Stabilization, mechanics of solids (particularly of soils), hydraulics, theory of structure, strength of materials, engineering geology.
• Proficiency in AutoCAD Civil 3D, Primavera P6, Microsoft Project, and USACE QCS systems.
• Experience with site surveying using both conventional and GPS methods.
• Assisting in the development of cost estimates and proposals.
• Experience with materials procurement and purchasing.

Preferred Competencies

• Problem Solving & Risk Assessment: Evaluate risks and effectively resolve challenges, champion safety and deliver exceptional quality standards.
• Autonomy & Prioritization: Self-motivated, ability to work independently, prioritize and meet deadlines.
• Collaboration & Feedback: Committed to integrity, communication, teamwork and proactive customer responsiveness.

Physical Demands & Work Environment

This office and field hybrid role requires frequent computer use and effective communication. Site work may involve extended periods of standing or walking and required PPE, with potential exposure to heavy equipment, chemicals, dust, fumes, uneven terrain, and extreme weather.

This job description outlines the general scope of work and is not exhaustive. Employees may be assigned additional duties as needed. Requirements may be adjusted to accommodate disabilities, except where they pose a direct safety risk.

Perks and Benefits

Forgen offers a comprehensive benefits package, including medical, dental, vision, retirement plans, bonuses, paid time off, and more. We support a flexible work model for most non-craft positions and provide additional perks like education assistance, wellness programs, and employee awards.

Work Arrangement
Onsite with occasional travel. Periods of development may require long irregular hours around deadlines, which can include weekends some holidays.

Job Overview
The Principal Aeromechanical Engineer is responsible for leading and overseeing the design, development, and testing of aeromechanical systems and components. They collaborate with cross-functional teams to ensure the successful integration of aerodynamic, mechanical, and structural elements in aircraft and spacecraft designs. They provide technical guidance and mentorship to junior engineers, contribute to project management activities, and stay updated on industry trends and advancements in aeromechanical engineering. 

Essential Functions
•    Lead the design and development of UAS products and subsystems.
•    Build and tests prototype systems to validate designs
•    Make decisions for design challenges and coordination with multidisciplinary engineering groups
•    Evaluate performance of all vehicle designs from initial concept to complete production-ready design
•    Conduct presentations (Formal and Informal) on designs.
•    Uses scientific and engineering principles to assess deficiencies in any given design and the impact of potential changes
•    Makes complex decisions to meet stated and derived requirements
•    Complete assigned tasks within the project schedule and budget
•    Provide guidance and mentorship to others in both their discipline and company values
•    Conduct FEA and CFD simulation analysis on aircraft and powerplants Design airframes and other aeromechanical parts
•    Act as an interface to customers as ideas are communicated

Standard Essential Functions
Regular and reliable attendance on a full time basis [or in accordance with posted schedule].
Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices.
Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications and Competencies
•    Demonstrated competence in Mechanical Engineering processes and design/analysis tools, solving Mechanics & Kinematics problems, solving             Thermodynamics problems
•    Experienced in successfully designing mil-y electronics products
•    Understanding of metallic, plastic, and composite material properties
•    Ability to solve basic structural dynamics problems
•    Proficiency in SolidWorks, Excel, Word, and PowerPoint is required
•    Understanding of industry design and documentation standards (GD&T, ASME, Change Control, etc.)
•    Experienced with designing machined parts, composite parts, injection molded parts, sheet metal parts, wire assemblies, and mechanical                       assemblies for low, medium, and high-volume manufacturing processes
•    Experienced with mechanical, lab, field, flight, and environmental testing
•    Understanding of engineering configuration management processes
•    Ability to work with high-level program requirements, organize, schedule, and delegate tasks to an engineering team
•    Ability to provide leadership to the team

Education / Certifications
•    Bachelor's Degree in Mechanical or Aerospace Engineering.
•    Master's Degree preferred.

Experience
•    Minimum of 10+ years of experience in a progressive technical capacity within an engineering organization

Physical Requirements
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is:

Frequently required to sit, and to reach to use computers and other office equipment

Security Clearance
•    Ability to obtain/maintain a Top Secret/SCI DoD clearance, U.S. Citizenship required.

We are seeking a Staff Software Engineer to join the KSAT Architecture Team — the engineering powerhouse behind our core product. This is a full-stack role requiring mastery of a Ruby on Rails backend, modern front-end technologies (Vue 3+, Svelte), and complex AWS infrastructure. As a Staff Engineer, you are a technical leader in day-to-day operations. This is not a people-management role; instead, you will drive direction through architectural ownership, high-impact code contributions, and cross-team influence. You will navigate a platform ecosystem & microservices, many of which are deployed across 6 AWS regions, ensuring we meet rigorous FedRAMP Moderate, SOC 2, and ISO 27001 standards.This individual in this role is responsible for developing new and exciting products for KnowBe4’s customers, alongside other engineers in a fast-paced, agile development environment.

Requirements:

• Architectural Leadership: Own the evolution of major subsystems, including GraphQL APIs, event-driven service communication (EventBridge/SQS), and data scaling.
• Full-Stack Development: Deliver primary technical contributions across Ruby/Rails APIs, SvelteKit/TypeScript frontends, and AWS serverless infrastructure.
• Scaling Operations: Optimize our serverless background processing framework, currently supporting 400+ Lambda-backed workers.
• Data Strategy: Architect multi-tenant patterns across MySQL, PostgreSQL, DynamoDB, and Redis while maintaining strict tenant isolation and compliance.
• Cross-Functional Coordination: Translate strategic goals into technical roadmaps, collaborating with Product, Security, and Infrastructure teams.
• Mentorship: Set the bar for code quality and architectural patterns through rigorous reviews and technical guidance for senior engineers.

Qualifications:

• BS + 10 years of experience OR
• MS + 5 years of experience OR
• Ph.D. + 4 years of experience
• Backend & Systems: 5+ years of scaling production Ruby on Rails apps. Expertise in GraphQL (batch loading, complexity management) and relational database tuning (MySQL/Postgres) for high-traffic multi-tenant systems.
• Frontend Mastery: Proficiency in modern frameworks (Vue Preferred, Sveltekit or React) and strict TypeScript. Proven ability to lead large-scale frontend migrations using Vite and Tailwind CSS.
• Cloud: Deep experience with AWS (ECS/Fargate, Lambda, EventBridge, S3). Strong proficiency with Terraform for Infrastructure-as-Code and GitLab CI/CD.
• Distributed Systems: Experience designing event-driven architectures and managing asynchronous processing at scale.
• Leadership: Demonstrated experience at the Staff level—writing Architecture Decision Records (ADRs) and building for compliance-regulated environments (FedRAMP/SOC 2).

Clearwater positions open to candidates located in greater Tampa Bay area. 

The Professional Services Engineer is a key technical resource supporting post-sales activities and customer success. This role combines product expertise with strong customer relationship skills to ensure successful implementation, configuration, and ongoing support of product deployments. The ideal candidate will have a broad knowledge of the product portfolio, excellent troubleshooting abilities, and the capacity to work closely with customers to maximize the value of their purchased solutions.

Responsibilities:

• Develop and maintain comprehensive knowledge of products and security awareness practices.
• Implement and configure products for small to mid-sized business customers post-purchase.
• Build and maintain strong relationships with key customer contacts.
• Record and track customer deployment activities.
• Support Snr. Professional Services colleagues and mentor junior team members as needed.
• Adhere to and promote security awareness practices
• Work closely with the Account Management team to ensure customers receive value from their purchased solution(s).
• Independently troubleshoot and resolve the majority of technical issues, seeking assistance from senior colleagues for more complex problems.
• Complete all policy requests received from customers or when supporting other team members.

Minimum Qualifications:

• Familiarity with standard concepts, practices and procedures within the IT Security Field
• Minimum of 1 year experience in similar or related position
• Two-year degree preferred
• Familiarity with firewall and email protocols is preferred
• Excellent verbal and written communications
• Highly organized and result-oriented
• Excellent time management and organization skills
• Can demonstrate technical troubleshooting and analysis ability
• Can demonstrate integrity, accountability, respect and commitment
• Strong collaborative and teamwork skills
• Must be able to work with minimal supervision

Security Clearance
•    Active Top Secret DoD clearance preferred, U.S. Citizenship required.

Work Arrangement
Onsite with occasional travel.

Job Overview
Sr. Aeromechanical Engineers work to solve the nation's hardest problems through rapidly deployed technology solutions. Are you an aerospace or mechanical engineer stuck in a narrow job? Do you want to rapidly build autonomous systems aligned with your hobbies and interests? This job is a lead aeromechanical engineer that takes napkin sketches of airplanes and robots to final production. We work with small teams to move fast and make fielded systems. Here you will lead a small agile team to make these systems a reality from napkin sketch to 1.0 prototype.

Essential Functions
•    Senior role within the engineering team that helps lead in the design and development of UAS products and subsystems.
•    Opportunity to build and tests prototype systems to validate designs
•    Have decision-making abilities for design challenges and coordination with multidisciplinary engineering groups
•    Performance of all vehicle designs from initial concept to complete production-ready design
•    Conduct presentations (Formal and Informal) on designs.
•    Uses scientific and engineering principles to assess deficiencies in any given design and the impact of potential changes
•    Makes complex decisions to meet stated and derived requirements
•    Complete assigned tasks within the project schedule and budget
•    Provide guidance and mentorship to others in both their discipline and company values
•    Conduct FEA and CFD simulation analysis on aircraft and powerplants Design airframes and other aeromechanical parts
•    Act as an interface to customers as ideas are communicated
•    Travel as required

Standard Essential Functions

Regular and reliable attendance on a full-time basis [or in accordance with posted schedule].
Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices. Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications and Competencies
•    Demonstrated competence in Mechanical Engineering processes and design/analysis tools, solving Mechanics & Kinematics problems, solving Thermodynamics problems
•    Experienced in successfully designing mil-y electronics products
•    Demonstrated understanding of metallic, plastic, and composite material properties
•    Demonstrated ability to solve basic structural dynamics problems
•    Proficiency in SolidWorks, Excel, Word, and PowerPoint is required
•    Demonstrated understanding of industry design and documentation standards (GD&T, ASME, Change Control, etc.)
•    Experienced with designing: machined parts, composite parts, injection molded parts, sheet metal parts, wire assemblies, and mechanical assemblies for low, medium, and high-volume                             manufacturing processes
•    Experienced with: mechanical, lab, field, flight, and environmental testing
•    Demonstrated understanding of engineering configuration management processes
•    Demonstrated ability to work with high-level program requirements, organize, schedule, and delegate tasks to an engineering team
•    Demonstrated leadership experience
•    Periods of development may require long irregular hours around deadlines, weekends, and some holidays and in-field test environments

Education / Certifications
•    Bachelor's Degree in Mechanical or Aerospace Engineering

Experience
•    Minimum of 8+ years of experience in a progressive technical capacity within an engineering organization

Physical Requirements
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties the employee is:
Frequently required to sit, and to reach to use computers and other office equipment

Security Clearance
•    Active Top Secret DoD clearance preferred, U.S. Citizenship required.

Work Arrangement
Onsite with occasional travel.

Job Overview
Sr. Aeromechanical Engineers work to solve the nation's hardest problems through rapidly deployed technology solutions. Are you an aerospace or mechanical engineer stuck in a narrow job? Do you want to rapidly build autonomous systems aligned with your hobbies and interests? This job is a lead aeromechanical engineer that takes napkin sketches of airplanes and robots to final production. We work with small teams to move fast and make fielded systems. Here you will lead a small agile team to make these systems a reality from napkin sketch to 1.0 prototype.

Essential Functions
•    Senior role within the engineering team that helps lead in the design and development of UAS products and subsystems.
•    Opportunity to build and tests prototype systems to validate designs
•    Have decision-making abilities for design challenges and coordination with multidisciplinary engineering groups
•    Performance of all vehicle designs from initial concept to complete production-ready design
•    Conduct presentations (Formal and Informal) on designs.
•    Uses scientific and engineering principles to assess deficiencies in any given design and the impact of potential changes
•    Makes complex decisions to meet stated and derived requirements
•    Complete assigned tasks within the project schedule and budget
•    Provide guidance and mentorship to others in both their discipline and company values
•    Conduct FEA and CFD simulation analysis on aircraft and powerplants Design airframes and other aeromechanical parts
•    Act as an interface to customers as ideas are communicated
•    Travel as required

Standard Essential Functions

Regular and reliable attendance on a full-time basis [or in accordance with posted schedule].
Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices. Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications and Competencies
•    Demonstrated competence in Mechanical Engineering processes and design/analysis tools, solving Mechanics & Kinematics problems, solving Thermodynamics problems
•    Experienced in successfully designing mil-y electronics products
•    Demonstrated understanding of metallic, plastic, and composite material properties
•    Demonstrated ability to solve basic structural dynamics problems
•    Proficiency in SolidWorks, Excel, Word, and PowerPoint is required
•    Demonstrated understanding of industry design and documentation standards (GD&T, ASME, Change Control, etc.)
•    Experienced with designing: machined parts, composite parts, injection molded parts, sheet metal parts, wire assemblies, and mechanical assemblies for low, medium, and high-volume                             manufacturing processes
•    Experienced with: mechanical, lab, field, flight, and environmental testing
•    Demonstrated understanding of engineering configuration management processes
•    Demonstrated ability to work with high-level program requirements, organize, schedule, and delegate tasks to an engineering team
•    Demonstrated leadership experience
•    Periods of development may require long irregular hours around deadlines, weekends, and some holidays and in-field test environments

Education / Certifications
•    Bachelor's Degree in Mechanical or Aerospace Engineering

Experience
•    Minimum of 8+ years of experience in a progressive technical capacity within an engineering organization

Physical Requirements
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties the employee is:
Frequently required to sit, and to reach to use computers and other office equipment

Work Arrangement

This is an onsite position in Tampa, FL, Huntsville , or Northern, VA.

Job Overview

The Sr. Mechanical Engineer   designs, develops, and oversees mechanical systems and components for various projects. Leads engineering teams, manages project timelines, ensures compliance with industry standards, performs technical analysis, and collaborates with cross-functional departments to deliver efficient and reliable mechanical solutions.

Essential Functions

• Investigates, analyzes, plans, designs, develops, implements, tests, to evaluate military weapons systems
• Reviews and prepares engineering and technical analyses, reports, change proposals, and other technical documentation
• Perform system integration, configuration management, quality assurance testing, or acquisition and resource management
• Analyzes designs, develops, implements, tests, or evaluates software, components, or systems related to engineering or functional requirements of military weapons systems, associated support systems, or Leads the execution of complex tasks
• Analyzes designs, develops, implements, tests, or evaluates software related to engineering or functional requirements of military weapons systems and associated support systems.
• Reviews and prepares engineering and technical analyses, reports, change proposals, and other technical documentation
• Own mass properties (weight, CG, inertia) and manage configuration trade-offs to meet performance targets
• Design and support tooling, fixtures, and jigs for prototype builds, test, and low-rate production
• Apply DFx principles (DFM, DFA, DFS, DFR) to improve manufacturability, assembly, reliability, serviceability, and cost
• Lead design reviews and cross-functional integration efforts
• Lead rapid prototyping (3D printing, composites, machined parts) and hands-on integration
• Conduct tolerance analysis, basic structural trade studies, and environmental considerations
• Lead build, integration, and flight test activities; rapidly troubleshoot mechanical issues
• Provide mentorship to other members of the team.
• Performs other related duties as assigned

Standard Essential Functions

• Regular and reliable attendance on a full time basis [or in accordance with posted schedule].
• Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices.
• Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications

• Strong ability to performs tasks with little or no guidance
• Familiarity with 2D or 3D engineering design and manufacturing tools (e.g., AutoCAD, ProE or other)
• Strong knowledge of engineering analysis tools (ANSYS, ProMechanica or similar)
• Extremely Proficient with GD&T and engineering drawing standards
• Strong knowledge of Solidworks
• Extremely detail oriented and capable with working in a team environment

Education / Certifications

• Bachelor's Degree in Mechanical Engineering or other related discipline.
• Master's Degree Desired

Experience

• 9+ years of mechanical engineering experience
• DoD experience highly preferred
• Experience in SolidWorks, SolidWorks Simulation, AutoCAD, electrical circuit design/troubleshooting, printed circuit board design, reverse engineering techniques, and Microsoft Project
• Experience with computer-aided engineering (CAE) and computer-aided manufacturing (CAM)

Physical Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is:

• Frequently required repetitive movements of wrists, hands, and/or fingers
• Frequently required to sit, and to reach to use computers and other office equipment

For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time.

Security Clearance

• Ability to obtain/maintain a Top Secret DoD clearance, U.S. Citizenship required.

Work Arrangement

This is an onsite position in Tampa, FL, Huntsville , or Northern, VA.

Job Overview

A Mechanical Engineer 3 is responsible for designing, analyzing, and improving mechanical systems and components.

Essential Functions

• Plan and perform engineering research, design, and development in conformance with design, engineering, and customer specifications
• Identify and document requirement through customer interface
• Create and review Mechanical CAD drawings and component layout designs
• Create, review, and maintain assembly drawings for enclosures, circuit boards, internal and external cable assemblies, etc.
• Own mass properties (weight, CG, inertia) and manage configuration trade-offs to meet performance targets
• Design and support tooling, fixtures, and jigs for prototype builds, test, and low-rate production
• Apply DFx principles (DFM, DFA, DFS, DFR) to improve manufacturability, assembly, reliability, serviceability, and cost
• Conduct rapid prototyping (3D printing, composites, machined parts) and hands-on integration
• Conduct tolerance analysis, basic structural trade studies, and environmental considerations
• Support build, integration, and flight test activities; rapidly troubleshoot mechanical issues
• Utilize industry and/or military specifications for Shock, Vibration, Temperature and Humidity requirements to develop and validate products
• Create and maintain engineering documentation (drawings, user instructions, bill of materials, etc.)
• Review mechanical designs and drawings of other Engineers
• Support manufacturing with aiding in work instruction generation, technical guidance on process settings and aid in development/implementation of new manufacturing test/build equipment as need
• Support production/fabrication by working closely with technicians on product build

Participate in design reviews and cross-functional integration efforts

Other duties as assigned

Standard Essential Functions

• Regular and reliable attendance on a full time basis [or in accordance with posted schedule].
• Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices.
• Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications

• Proficient with 2D or 3D engineering design and manufacturing tools (e.g., AutoCAD, ProE or other)
• Adequate knowledge of engineering analysis tools (ANSYS, ProMechanica or similar)
• Proficient with GD&T and engineering drawing standards
• Strong knowledge of Solidworks
• Detail oriented and capable with working in a team environment
• Strong verbal and written communication skills

Education / Certifications

• Bachelor's Degree in Mechanical Engineering or other related discipline.

Experience

• 6-9 years of mechanical engineering experience.
• Hands-on experience with computer-aided engineering (CAE) and computer-aided manufacturing (CAM)

Physical Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is:

• Frequently required repetitive movements of wrists, hands, and/or fingers

For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time.

Security Clearance

• Ability to obtain/maintain a Top Secret DoD clearance, U.S. Citizenship required.

Work Arrangement

This is an onsite position in Tampa, FL, Huntsville , or Northern, VA.

Job Overview

The Systems Engineer 2 supports the development, integration, and sustainment of complex aerospace and defense systems throughout the program lifecycle. This position contributes to defining system architectures, developing and managing requirements, and ensuring technical solutions meet customer, mission, and regulatory objectives.

Essential Functions

• Support the development, decomposition, and documentation pf system and subsystem-level requirements, including specified and derived requirements, in accordance with program and contract objectives.
• Support the full requirements lifecycle, including identification, traceability, verification, validation, and configuration management.
• Develop and maintain technical documentation such as system block diagrams, interface control documents (ICDs), specifications, user manuals, and standard operating procedures.
• Participate in systems engineering planning, including risk management, resource allocation, schedule coordination, and technical performance assessment.
• Apply disciplined systems engineering principles to analyze, plan, and evaluate design, integration, test, and sustainment activities in accordance with established processes and standards (e.g., INCOSE, MIL-STD, AS9100).
• Contribute to the development and continuous improvement of systems engineering processes, tools, and controls to ensure consistency and compliance across programs.
• Support ground test, hot-fire, integration, and flight test planning and execution
• Assist with defining propulsion system architectures, including engines, RATO units, ignition systems, fuel delivery, and controls
• Manage propulsion interfaces with airframe, avionics, power, controls, and safety systems
• Support certification, compliance, and range safety requirements as applicable
• Support technical issue resolution across research, development, production, and lifecycle sustainment phases for manned and unmanned aircraft systems or mission-related platforms.
• Support the preparation and review of engineering analyses, technical reports, change proposals, and other supporting documentation for internal and customer delivery.
• Participate in and support technical and programmatic reviews, including Technical Interchange Meetings (TIMs), Preliminary and Critical Design Reviews (PDR/CDR), Test Readiness Reviews (TRRs), integration meetings, and flight or laboratory test events.
• Perform other duties as assigned to support successful program execution.

Standard Essential Functions

• Regular and reliable attendance on a full time basis [or in accordance with posted schedule].
• Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices.
• Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications

• Proficient knowledge of Unmanned Aircraft Systems (UAS) operations, maintenance, modification, and research, development, test, and evaluation (RDT&E) activities across the system lifecycle.
• Working familiarity with MIL-STD-810 (environmental testing) and MIL-STD-461/464 (EMI/EMC and electromagnetic environmental effects) test standards, including application in qualification and verification planning.
• Demonstrated proficiency with configuration management tools such as Jama Connect, Windchill, DOORS, or Git, and a solid understanding of CM principles per MIL-HDBK-61A and AS9100 frameworks.
• Working knowledge of scripting languages (e.g., Python, Bash, or Perl) for process automation, data parsing, or test result analysis is desirable but not required.
• Proven ability to plan and prioritize work effectively, manage and prioritize concurrent technical tasks, and make sound, data-driven decisions in a dynamic engineering environment.
• Proficient analytical and problem-solving skills with the ability to synthesize data into practical, actionable engineering solutions.
• Proficient written and verbal communication

Education / Certifications

• Bachelor’s degree in Systems Engineering, Electrical Engineering, Mechanical Engineering, Computer Science, Aerospace Engineering, or a related technical discipline.

Experience

• 3+ years of relevant engineering experience supporting defense, aerospace, or related technical programs.
• Experience with report template scripting (e.g., Jama Velocity templates or equivalent markup) for automating documentation and customizing data exports.

Physical Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is:

• Constantly required to sit, and to reach to use computers and other office equipment
• Frequently required repetitive movements of wrists, hands, and/or fingers

For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time.

Security Clearance

• Ability to obtain/maintain a Top Secret DoD clearance, U.S. Citizenship required.

Work Arrangement

This is an onsite position in Tampa, FL, Huntsville , or Northern, VA.

Job Overview

The Systems Engineer 3 will contribute to the development, integration, and testing of Unmanned Aerial Systems (UAS). This upper-level role requires a hands-on approach to support subsystem integration and execute test plans to meet aerospace standards under the guidance of senior engineers.

Essential Functions

• Design and implement integration plans for UAS subsystems, ensuring compatibility across mechanical, electrical, and software components.
• Support circuit board design, including schematic capture and PCB layout, using tools such as Altium or Eagle, under senior engineer supervision.
• Conduct benchtop electrical tests, such as power distribution and signal integrity checks, using oscilloscopes, multimeters, and other test equipment.
• Own propulsion system requirements, interfaces, and verification plans for jet and RATO-equipped UAS platforms
• Perform RF testing, including antenna performance and signal propagation, to support communication and telemetry system integration.
• Execute test plans for environmental, functional, and stress testing, following established procedures to meet aerospace standards (e.g., MIL-STD, DO-160).
• Identify and resolve integration issues related to electrical systems & mechanical systems, collaborating with cross-functional teams.
• Prepare technical documentation, including test procedures and reports, to support system validation and certification.
• Support ground test, hot-fire, integration, and flight test planning and execution
• Define propulsion system architectures, including engines, RATO units, ignition systems, fuel delivery, and controls
• Manage propulsion interfaces with airframe, avionics, power, controls, and safety systems
• Coordinate with suppliers and partners on propulsion components and qualification
• Support certification, compliance, and range safety requirements as applicable
• Work on multi-discipline teams with systems engineers, software developers, electrical engineers, and mechanical engineers to support cohesive system design and performance.
• Follow regulations and safety standards during integration and testing activities.
• Perform other duties as required.

Standard Essential Functions

• Regular and reliable attendance on a full time basis [or in accordance with posted schedule].
• Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices.
• Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications

• Excellent at hands on building of mechanical assemblies for support of testing activities, fit checks, etc.
• Proficiency in electrical design tools (e.g., Altium Designer, Eagle) and data analysis tools.
• Familiarity with test equipment (e.g., oscilloscopes, multimeters, signal generators).
• Strong understanding of electrical systems (power management, analog/digital circuits).
• Familiarity of RF principles (signal modulation, antenna performance) is a plus.
• Familiarity of Mechanical Design Software (SolidWorks, Fusion360) is a plus.
• Familiarity with aerospace/MIL standards.
• Strong problem-solving, communication, and teamwork skills
• Proficient knowledge of embedded systems or firmware development.
• Strong written and verbal communication skills, with the ability to clearly convey complex technical information to multidisciplinary teams, program management, and external stakeholders.

Education / Certifications

• Bachelor's Degree in Electrical Engineering, Mechanical Engineering, Aerospace Engineering, Systems Engineering, or a related field.
• Master’s degree in Electrical Engineering, Mechanical Engineering, Aerospace Engineering, Systems Engineering, or a related field desirable.

Experience

• 6+ years of relevant engineering experience supporting defense, aerospace, or related technical programs.
• Hands-on experience with circuit board design and/or benchtop electrical testing.
• Experience with UAS or drone systems through projects.
• Experience with integration and testing of subsystems into aerospace vehicles.
• Experience working with electrical systems, including circuit board design, benchtop electrical testing, and RF work

Physical Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is:

• Frequently required to sit, and to reach to use computers and other office equipment
• Occasionally required repetitive movements of wrists, hands, and/or fingers

For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time.

Security Clearance

• Ability to obtain/maintain a Top Secret DoD clearance, U.S. Citizenship required.

Work Arrangement

This is an onsite position in Tampa, FL, Huntsville , or Northern, VA.

Job Overview

A Mechanical Engineer 2 is responsible for designing, analyzing, and improving mechanical systems and components.

Essential Functions

• Support the planning and performing engineering research, design, and development in conformance with design, engineering, and customer specifications
• Identify and document requirement through customer interface
• Create and review Mechanical CAD drawings and component layout designs
• Create, review, and maintain assembly drawings for enclosures, circuit boards, internal and external cable assemblies, etc.
• Design and support tooling, fixtures, and jigs for prototype builds, test, and low-rate production
• Apply DFx principles (DFM, DFA, DFS, DFR) to improve manufacturability, assembly, reliability, serviceability, and cost
• Support rapid prototyping (3D printing, composites, machined parts) and hands-on integration
• Assist with conducting tolerance analysis, basic structural trade studies, and environmental considerations
• Support build, integration, and flight test activities; rapidly troubleshoot mechanical issues
• Utilize industry and/or military specifications for Shock, Vibration, Temperature and Humidity requirements to develop and validate products
• Support the creation and maintenance of engineering documentation (drawings, user instructions, bill of materials, etc.)
• Support manufacturing with aiding in work instruction generation, technical guidance on process settings and aid in development/implementation of new manufacturing test/build equipment as need
• Support production/fabrication by working closely with technicians on product build
• Other duties as assigned

Standard Essential Functions

• Regular and reliable attendance on a full time basis [or in accordance with posted schedule].
• Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices.
• Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications

• Familiarity with 2D or 3D engineering design and manufacturing tools (e.g., AutoCAD, ProE or other)
• Familiarity with GD&T and engineering drawing standards
• Familiarity with engineering analysis tools (ANSYS, ProMechanica or similar)
• Proficient knowledge of Solidworks
• Detail oriented and capable with working in a team environment
• Strong verbal and written communication skills

Education / Certifications

• Bachelor's Degree in Mechanical Engineering or other related discipline.

Experience

• 3-6 years of mechanical engineering experience.

Physical Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is:

• Frequently required repetitive movements of wrists, hands, and/or fingers
• Frequently required to sit, and to reach to use computers and other office equipment

For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time.

Security Clearance

• Ability to obtain/maintain a Top Secret DoD clearance, U.S. Citizenship required.

Position Overview 

McAdams is seeking a seasoned Senior Project Manager with expertise in Water Resources to lead complex, multidisciplinary projects and support the continued growth of our Central Florida practice. This is a high-impact role for a leader who blends technical excellence, project delivery, and business development—driving results for premier clients while helping scale McAdams’ expanding Water Resources market presence. 

At McAdams, we invest in growth-minded leaders who are eager to build, innovate, and elevate those around them. This role offers autonomy to shape strategy, influence market direction, and expand capabilities—supported by a collaborative leadership team, strong internal resources, and a platform for long-term career development. This opportunity is well-suited for a leader who thrives in an entrepreneurial environment, values continuous improvement, and is motivated by creating lasting community impact. 

Key Responsibilities 

• Lead growth of the Water Resources practice in Central Florida by leveraging market insight, client relationships, and pursuit strategies to secure new work and expand McAdams’ market presence.  
• Drive business development activities including client positioning, proposal development, interviews, and contract negotiations, with accountability for pursuit strategy and outcomes.  
• Serve as a trusted advisor to clients by understanding their business initiatives and challenges to identify new opportunities, expand existing relationships, and cross-sell firm services.  
• Develop and negotiate scopes, fees, schedules, and contracts that appropriately define project requirements while ensuring profitability, risk management, and delivery viability.  
• Provide leadership and accountability for project execution, ensuring successful delivery that meets or exceeds client, stakeholder, and regulatory and permitting requirements in alignment with McAdams’ standards.  
• Oversee project financial performance and resource planning, managing budgets, staffing, schedules, and workload to achieve project and business objectives.  
• Lead technical direction and quality control for water resources projects, including review of analyses, designs, reports, and deliverables to ensure technical excellence.  
• Mentor, develop, and inspire team members, fostering an entrepreneurial, collaborative, and high-performing culture aligned with firm growth goals. 

Skills + Experience  

• Bachelor’s degree in civil engineering or a related engineering discipline  
• Professional Engineer (PE) license  
• 10+ years of progressive experience in Water Resources and municipal consulting, preferably within the Architecture, Engineering, and Construction (AEC) industry  
• Proven ability to lead small to large, complex projects through planning, design, and delivery—independently and within multidisciplinary team environments  
• Strong understanding of project financial performance, including budgets, profitability, revenue forecasting, and schedule impacts  
• Experience managing teams to deliver high-quality technical solutions while meeting client expectations and business objectives  
• Demonstrated success in developing, managing, and expanding key client relationships within the public sector  
•  Experience supporting or leading pursuit strategies, proposal development, and client interviews to win new work  
• Established relationships with municipalities, public agencies, and/or regulatory entities in Central Florida, with the ability to leverage those relationships to grow market presence  
• Strong interest in and commitment to advancing and growing the Water Resources practice in Central Florida  
• Excellent technical writing, verbal communication, and interpersonal skills  
• Self-driven, well-organized, and team-oriented leader who mentors others and fosters collaboration across disciplines 

Work Environment + Physical Demands 

The characteristics described below are representative of those encountered while performing the essential functions of this position. When properly requested and when feasible (without undue hardship to the company), reasonable accommodation will be made to enable individuals with disabilities to perform essential job functions. 

• Work will primarily be in an office setting with limited opportunities to be exposed to adverse environmental conditions, however when conducting field work, exposure to outside environmental conditions should be expected.  
• Work will be primarily working with fingers by picking, pinching, typing, and grasping often with repetitive motion.  
• Must have visual acuity for viewing a computer screen, the ability to talk, hear and sit for extended periods of time. 
• Must be able to carry, lift and push/pull up to 5 pounds frequently and up to 30 pounds occasionally. When working in the field, the need to carry, lift and push/pull up to 50 or higher pounds may occur.  
• Field based work will involve long-term standing and frequent walking as well as include common hazards encountered while maneuvering through project sites.  
• Must have the ability to see, smell, hear, talk, climb, balance, stoop, kneel and twist, crouch, crawl, reach, grasp, sit, stand, and walk.  
• Additional physical duties may be required as necessary. 

Position Overview 

The Land Development Engineering lead for the Orlando (ORL) metro will spearhead the growth, direction, and performance of McAdams’ Land Development Design practice. This leader will build and sustain strong relationships with private developers, municipal partners, and key regional stakeholders across Central Florida, while leading a high-performing, multi-disciplinary team delivering exceptional residential, commercial, and mixed-use projects.  

As Lead, you'll be accountable for operational excellence, project delivery quality, and business development results, ensuring consistent execution aligned with McAdams’ standards, culture, and long-term strategic objectives. This role also champions talent development—coaching, mentoring, and expanding the team to support growth, elevate technical excellence, and strengthen McAdams’ presence in the ORL market.  

At McAdams, we invest in growth-minded leaders who are eager to build, innovate, and elevate those around them. You will have the autonomy to shape strategy, influence market direction, and expand capabilities—backed by a collaborative leadership team, robust internal resources, and a strong platform for long-term career development. This role is ideal for a leader who thrives in an entrepreneurial environment and is motivated by meaningful impact, continuous improvement, and helping others succeed.  

Key Responsibilities 

• Lead the strategic direction, vision, and growth of the ORL Land Development practice.  
• Cultivate trusted relationships with Central Florida developers, landowners, municipalities, and reviewing agencies.  
• Proactively identify new business opportunities and lead pursuit strategies for major development projects.  
• Oversee execution of large-scale, multi-disciplinary land development projects with strong project controls and financial performance.  
• Ensure predictable project outcomes through effective scheduling, budgeting, and risk management.  
• Recruit, hire, and develop high-performing teams to support long-term practice growth.  
• Mentor staff and promote a collaborative, learning-focused environment that supports career development.  
• Drive operational excellence, resource planning, and compliance with company standards and industry regulations.  

Skills + Experience  

• Professional Engineer (PE) license required 
• 10+ years of progressive experience in land development engineering  
• Proven leadership delivering large-scale residential, commercial, and mixed-use projects 
• Strong credibility with Central Florida developers, municipalities, and regulatory agencies  
• Demonstrated ability to manage multi-disciplinary teams and complex project portfolios 
• Experience in business development and growing a regional practice 
• Excellent communication, leadership presence, and emotional intelligence 

Work Environment + Physical Demands 

The characteristics described below are representative of those encountered while performing the essential functions of this position. When properly requested and when feasible (without undue hardship to the company), reasonable accommodation will be made to enable individuals with disabilities to perform essential job functions. 

• Work will primarily be in an office setting with limited opportunities to be exposed to adverse environmental conditions. 
• Work will be primarily working with fingers by picking, pinching, typing, and grasping often with repetitive motion.  
• Must have visual acuity for viewing a computer screen, the ability to talk, hear and sit for extended periods of time. 
• Must be able to carry, lift and push/pull up to 5 pounds frequently and up to 30 pounds occasionally.  
• Additional physical duties may be required as necessary. 

Position Overview 

The Land Development Engineering lead for the Orlando (ORL) or Tampa (TPA) metro will spearhead the growth, direction, and performance of McAdams’ Land Development Design practice. This leader will build and sustain strong relationships with private developers, municipal partners, and key regional stakeholders across Central Florida, while leading a high-performing, multi-disciplinary team delivering exceptional residential, commercial, and mixed-use projects.  

As Lead, you'll be accountable for operational excellence, project delivery quality, and business development results, ensuring consistent execution aligned with McAdams’ standards, culture, and long-term strategic objectives. This role also champions talent development—coaching, mentoring, and expanding the team to support growth, elevate technical excellence, and strengthen McAdams’ presence in the ORL market.  

At McAdams, we invest in growth-minded leaders who are eager to build, innovate, and elevate those around them. You will have the autonomy to shape strategy, influence market direction, and expand capabilities—backed by a collaborative leadership team, robust internal resources, and a strong platform for long-term career development. This role is ideal for a leader who thrives in an entrepreneurial environment and is motivated by meaningful impact, continuous improvement, and helping others succeed.  

Key Responsibilities 

• Lead the strategic direction, vision, and growth of the ORL Land Development practice.  
• Cultivate trusted relationships with Central Florida developers, landowners, municipalities, and reviewing agencies.  
• Proactively identify new business opportunities and lead pursuit strategies for major development projects.  
• Oversee execution of large-scale, multi-disciplinary land development projects with strong project controls and financial performance.  
• Ensure predictable project outcomes through effective scheduling, budgeting, and risk management.  
• Recruit, hire, and develop high-performing teams to support long-term practice growth.  
• Mentor staff and promote a collaborative, learning-focused environment that supports career development.  
• Drive operational excellence, resource planning, and compliance with company standards and industry regulations.  

Skills + Experience  

• Professional Engineer (PE) license required 
• 10+ years of progressive experience in land development engineering  
• Proven leadership delivering large-scale residential, commercial, and mixed-use projects 
• Strong credibility with Central Florida developers, municipalities, and regulatory agencies  
• Demonstrated ability to manage multi-disciplinary teams and complex project portfolios 
• Experience in business development and growing a regional practice 
• Excellent communication, leadership presence, and emotional intelligence 

Work Environment + Physical Demands 

The characteristics described below are representative of those encountered while performing the essential functions of this position. When properly requested and when feasible (without undue hardship to the company), reasonable accommodation will be made to enable individuals with disabilities to perform essential job functions. 

• Work will primarily be in an office setting with limited opportunities to be exposed to adverse environmental conditions. 
• Work will be primarily working with fingers by picking, pinching, typing, and grasping often with repetitive motion.  
• Must have visual acuity for viewing a computer screen, the ability to talk, hear and sit for extended periods of time. 
• Must be able to carry, lift and push/pull up to 5 pounds frequently and up to 30 pounds occasionally.  
• Additional physical duties may be required as necessary. 

ChenMoore is hiring a Senior Civil Engineering Project Manager. Candidates should be able to efficiently plan and organize workload, demonstrate success working with a team of professionals, a commitment to quality, good communication skills, and a positive work ethic. The candidate would focus on water/wastewater utility infrastructure, storm water, drainage, roadway, and land development projects for both municipal sector clients. This role will require travel and coordination with professionals from other offices within Florida.

Responsibilities:

• Project Management of planning, design, and construction management of water/wastewater utility infrastructure, storm water, drainage, roadway, and land development projects. Projects may include Wastewater Conveyance, Water Supply, Water Distribution, Master planning services including hydraulic modeling for public sector clients.
• Managing activities related to project scope, schedule, cost, quality, communications, resources, and risk elements to optimize client service, quality, and fiscal responsibility.
• Project outlines, project initiation, project schedules, project executions, and project closeout
• Lead specification and contract document preparation including permitting, and stakeholder involvement.
• Manage day-to-day activities of project engagements including clients and project teams.
• Successfully interface with multi-disciplinary design teams
• Achieve project objectives including quality/scopes, budgets, and schedules.
• Mentor engineering staff
• Assist in marketing business opportunities with key clients and development of responses to RFPs/RFQs
• Develop and maintain continuing business relationships with clients as part of ongoing business development efforts.
• Participate in local water and wastewater, and other professional organizations.

Qualifications:

• Bachelor’s degree in civil or environmental engineering
• Master’s degree is a plus.
• 10+ years of relevant experience is required.
• Professional Engineer (PE) license required.
• Excellent technical writing skills
• Strong client relationship skills
• Outstanding organizational skills
• Strong sense of urgency, project responsibility and initiative
• Ability to work independently and as part of a team.
• Excellent verbal, written and interpersonal skills

Location: South Bay, FL

Position Summary

Apply the general knowledge of the physical sciences and mathematics underlying engineering and specialized knowledge of the mechanics of solids (particularly of soils), hydraulics, theory of structure, strength of materials, engineering geology and surveying. The Project Engineer will assist with the overall execution of projects in accordance with the established budget, schedule, contract plans and specifications.  Ensure the company’s safety culture is documented, communicated, and enforced in accordance with the company’s established policies and procedures.

Forgen Overview

Forgen is a leading geotechnical and specialty civil construction company operating across North America. We are dedicated to delivering innovative solutions for complex civil, geotechnical, and environmental challenges, guided by our core values of integrity, passion, teamwork, and smart work.

Key Responsibilities

• Perform Project specific engineering support, including:
  • Preparing project submittals.
  • Maintaining project record documents.
  • Perform technical review of contract plans and specifications.
  • Provide oversight and documentation related to project quality control in accordance with the contract plans, specifications, and company policies and procedures.
  • Preparing daily construction reports and progress tracking.
  • Manage, interpret, and perform site surveying.
  • Assist with the management of subcontractors.
  • Assist with the procurement or rental of equipment and materials.
  • Assist Project Manager with project daily cost reporting and tracking.
• Perform Office engineering support, including:
  • Assist in the development of project cost estimates, proposals, and material take-offs.
  • Perform technical analysis of the remediation methodologies of various previously remediated projects.
  • Perform other administrative or office duties as required or as assigned.
  • Travel to project sites as necessary for extended durations.
  • Adhere to all federal, state, and local regulations.
• Excellent computer skills including knowledge and experience with Microsoft Office, Outlook, and Excel.
• Must be able to thoroughly understand the scope of a project through plans and project specifications.
• Advanced knowledge of construction engineering technology, codes and standards, and an in-depth understanding of the interdependence and relationship between other functional units.
• Perform additional assignments and special projects as directed.

Basic Qualifications

• BS, Civil Engineering, Construction Management or equivalent preferred but not mandatory.
• 5 – 10 years of experience doing the following:
  • Experience with AutoCAD Civil 3D software.
  • Experience with Primavera P6 scheduling software.
  • Experience with Microsoft Project scheduling software.
  • Experience with USACE QCS System.
  • Experience with site surveying, both conventional and GPS.
  • Assisting with the development of cost estimates and proposals.
  • Prior experience with materials procurement and purchasing.
• Valid Driver’s License and ability to drive on behalf of company business.

Preferred Qualifications

• The following safety training is preferred, but not mandatory. Company will provide additional training, as necessary.
• 40 Hour HAZWOPER training.
• Competent Person Safety Training
• 8-Hour Supervisory Training
• 30-Hour OSHA Construction Safety Training
• First Aid and CPR

Physical Demands & Work Environment

This office-based role requires frequent computer use and effective communication, with occasional travel to project sites as needed. Site visits may involve extended periods of standing or walking and required PPE, with potential exposure to heavy equipment, chemicals, dust, fumes, uneven terrain, and extreme weather.

This job description outlines the general scope of work and is not exhaustive. Employees may be assigned additional duties as needed. Requirements may be adjusted to accommodate disabilities, except where they pose a direct safety risk.

Perks and Benefits

Forgen offers a comprehensive benefits package, including medical, dental, vision, retirement plans, bonuses, paid time off, and more. We support a flexible work model for most non-craft positions and provide additional perks like education assistance, wellness programs, and employee awards.

Location: West Palm Beach, FL

Travel: 75% (Primarily assigned to project sites)

Position Summary

The Project Engineer II is a mid-level, field-focused role responsible for supporting project execution with significant time spent onsite at active construction projects. With a minimum of three years of relevant experience, this role applies advanced engineering principles in soil mechanics, hydraulics, structural theory, and geotechnical construction to ensure safe, efficient, and compliant field operations.

The Project Engineer II works closely with project managers, superintendents, field engineers, subcontractors, and craft teams. This position takes increased ownership of field coordination, production tracking, quality control, and technical problem solving. While some office-based responsibilities are required, the role is primarily field-heavy, requiring extended durations on project sites and direct engagement in daily construction activities. The Project Engineer II upholds Forgen’s Core Values and safety culture in all aspects of work.

Forgen Overview

Forgen is a leading geotechnical and specialty civil construction company operating across North America. We are dedicated to delivering innovative solutions for complex civil, geotechnical, and environmental challenges, guided by our core values of integrity, passion, teamwork, and smart work.

Key Responsibilities

Field Responsibilities (Primary Focus)

• Serve as an onsite engineering resource for daily field operations, working closely with superintendents and craft teams.
• Prepare and coordinate project submittals and ensure implementation in the field.
• Perform detailed technical reviews of contract plans, specifications, and field conditions; identify constructability issues and recommend solutions.
• Provide oversight, documentation, and verification of quality control activities, ensuring compliance with project requirements and company procedures.
• Manage field surveying activities using both conventional and GPS equipment; interpret and communicate layout information to crews.
• Track daily quantities, production rates, equipment utilization, and workforce assignments to support cost and schedule performance.
• Prepare daily construction reports, progress updates, and documentation for field records.
• Coordinate subcontractor activities, monitor work progress, and help resolve field issues.
• Assist with equipment and material procurement, delivery tracking, and onsite inventory management.
• Support field implementation of safety, environmental, and quality plans.
• Provide engineering judgment and technical support to resolve onsite challenges quickly and effectively.
• Perform additional field assignments and special projects as directed.

Office Responsibilities

• Support development of project cost estimates, proposals, scopes, and material take-offs.
• Prepare and update project budgets, schedules, and cost tracking tools with increasing autonomy.
• Conduct technical analyses and evaluate remediation approaches and lessons learned from past projects.
• Assist with project controls, including forecasting, production analysis, and cost reporting.
• Complete administrative tasks as needed to support overall project delivery.
• Travel to project sites for extended durations as required.

Basic Qualifications

• Bachelor’s degree in Civil Engineering, Construction Management, or a related field.
• Minimum 3 years of construction or engineering experience, with a strong preference for heavy civil, geotechnical, or environmental fieldwork.
• Demonstrated ability to work effectively in a field-based role with extended time onsite.
• Proficiency in Microsoft Office and project management tools.
• Ability to read and interpret construction documents, geotechnical data, and specifications.
• Strong communication, organization, and problem-solving skills.
• Valid driver’s license and ability to drive for company purposes.

Preferred Qualifications

• Field experience in geotechnical or environmental construction, including earthwork, site surveying, ground improvement, deep foundations, or in-situ stabilization.
• Proficiency with AutoCAD Civil 3D, Primavera P6, Microsoft Project, and USACE QCS systems.
• Experience coordinating equipment, materials, vendors, and subcontractors in the field.
• GPS-based surveying experience and familiarity with machine control systems.
• Experience developing cost estimates, proposals, and procurement packages.

Preferred Competencies

• Field Leadership & Problem Solving: Ability to identify risks early, troubleshoot issues, and support safe, effective field execution.
• Autonomy & Prioritization: Self-directed; able to manage multiple tasks and shifting priorities onsite.
• Collaboration & Communication: Builds strong working relationships with field leaders, subcontractors, and project teams; communicates clearly and proactively.

Physical Demands & Work Environment

This office and field hybrid role requires frequent computer use and effective communication, with occasional travel to project sites as needed. Site visits may involve extended periods of standing or walking and required PPE, with potential exposure to heavy equipment, chemicals, dust, fumes, uneven terrain, and extreme weather.

This job description outlines the general scope of work and is not exhaustive. Employees may be assigned additional duties as needed. Requirements may be adjusted to accommodate disabilities, except where they pose a direct safety risk.

Perks and Benefits

Forgen offers a comprehensive benefits package, including medical, dental, vision, retirement plans, bonuses, paid time off, and more. We support a flexible work model for most non-craft positions and provide additional perks like education assistance, wellness programs, and employee awards.

Location: West Palm Beach, FL

Position Summary

Forgen is seeking students pursuing degrees in Civil Engineering, Construction Management, or related field; and other interested candidates to join our various project locations for internship opportunities.

This internship applies the general knowledge of the physical sciences and mathematics underlying engineering and specialized knowledge of the mechanics of solids (particularly of soils), hydraulics, theory of structure, strength of materials, engineering geology and surveying. The Project Engineer Intern assists with the overall execution of projects in accordance with the established budget, schedule, contract plans and specifications.  Ensure the company’s safety culture is documented, communicated, and enforced in accordance with the company’s established policies and procedures.

Forgen Overview

Forgen is a leading geotechnical and specialty civil construction company operating across North America. We are dedicated to delivering innovative solutions for complex civil, geotechnical, and environmental challenges, guided by our core values of integrity, passion, teamwork, and smart work.

Key Responsibilities

• • Field Tasks:
• Prepare project submittals.
• Maintain project record documents.
• Perform technical review of contract plans and specifications.
• Provide oversight and documentation related to project quality control in accordance with the contract plans, specifications, and company policies and procedures.
• Prepare daily construction reports and progress tracking.
• Manage, interpret, and perform site surveying.
• Assist with the management of subcontractors.
• Assist with the procurement or rental of equipment and materials.
• Assist Project Manager with project daily cost reporting and tracking.
• Travel to project sites as necessary for extended durations.
  • Office Tasks:
• Assist in the development of project cost estimates, proposals, and material take-offs.
• Perform technical analysis of the remediation methodologies of various previously remediated projects.
• Perform other administrative or office duties as required or as assigned.
• Adhere to all federal, state, and local regulations.
• Knowledge and experience with Microsoft Office, Outlook, and Excel.
• Perform additional assignments and special projects as directed.

Basic Qualifications

• Candidates must be working towards a BS degree in Civil Engineering, Construction Management, or equivalent.
• Valid Driver’s License and ability to drive on behalf of company business.

Preferred Qualifications

• Experience with AutoCAD Civil 3D software.
• Experience with Primavera P6 scheduling software.
• Experience with Microsoft Project scheduling software.
• Experience with USACE QCS System.
• Experience with site surveying, both conventional and GPS.
• Assisting with the development of cost estimates and proposals.
• Prior project experience with In-Situ Stabilization.
• Prior experience with materials procurement and purchasing.

Preferred Competencies

• Must be self-motivated and interested in learning all aspects of environmental and geotechnical construction.
• Problem Solving & Risk Assessment: Evaluate risks and effectively resolve challenges, champion safety and deliver exceptional quality standards.
• Autonomy & Prioritization: Self-motivated, ability to work independently, prioritize and meet deadlines.

Physical Demands & Work Environment

This office and field hybrid role requires frequent computer use and effective communication. Site work may involve extended periods of standing or walking and required PPE, with potential exposure to heavy equipment, chemicals, dust, fumes, uneven terrain, and extreme weather.

This job description outlines the general scope of work and is not exhaustive. Employees may be assigned additional duties as needed. Requirements may be adjusted to accommodate disabilities, except where they pose a direct safety risk.

Location: South Bay, Florida

Position Summary

The Quality Control Engineer is responsible for ensuring that all construction activities and deliverables meet or exceed project specifications, contract requirements, and industry standards. This role involves developing and implementing quality control plans, conducting inspections and tests, and collaborating with project teams to resolve quality issues.

Forgen Overview

Forgen is a leading geotechnical and specialty civil construction company operating across North America. We are dedicated to delivering innovative solutions for complex civil, geotechnical, and environmental challenges, guided by our core values of integrity, passion, teamwork, and smart work.

Key Responsibilities

• Develop, implement, and maintain project-specific Quality Control Plans (QCPs) in compliance with contract documents and company standards.
• Perform and document inspections, tests, and audits of construction activities, materials, and workmanship to verify compliance with project specifications and regulatory requirements.
• Coordinate with project managers, superintendents, subcontractors, and clients to address and resolve quality-related issues in a timely manner.
• Track, report, and monitor non-conformance items and corrective actions to ensure continuous improvement.
• Maintain organized and accurate quality records, including inspection reports, testing data, and certifications.
• Provide training and guidance to project teams on quality standards, procedures, and best practices.
• Support safety and environmental compliance initiatives, ensuring that quality control processes align with Forgen’s Incident and Injury Free (IIF) culture.
• Participate in pre-construction meetings, progress meetings, and closeout reviews to represent the quality control function.

Basic Qualifications

• Bachelor’s degree in Civil Engineering, Construction Management, Environmental Engineering, or a related technical field preferred.
• Equivalent combination of education, training, and relevant experience in quality control, construction, or engineering disciplines will be considered in lieu of a formal degree.
• Minimum of 2+ years of experience in quality control for heavy civil, geotechnical, or environmental construction projects.
• Solid understanding of construction methods, specifications, and applicable industry standards (e.g., ASTM, AASHTO, ACI).
• Strong attention to detail with effective organizational and documentation skills.
• Ability to communicate clearly and work collaboratively with multidisciplinary teams.
• Proficiency in Microsoft Office Suite; familiarity with construction management software is a plus.
• Willingness and ability to travel and work on active project sites as required.
• Demonstrated commitment to quality, safety, and continuous improvement.

Preferred Qualifications

• The following safety training is preferred, but not mandatory. Company will provide additional training, as necessary.
  • 40-Hour HAZWOPER Training
  • 8-Hour OSHA Refresher.
  • Competent Person Safety Training.
  • 30-Hour OSHA Construction Safety Training.
  • EM 385-1-1 Training

Physical Demands & Work Environment

This role requires lifting up to 50 pounds, extended standing or walking on project sites, climbing in and out of equipment, and working in confined spaces or at heights. Work conditions and demands may vary, with possible exposure to heavy machinery, chemicals, dust, fumes, noise, and extreme weather. Proper PPE, including protective eyewear, gloves, a hard hat, and steel-toed boots, is required. Effective communication, tool use, and adherence to safety protocols are essential.

This job description outlines the general scope of work and is not exhaustive. Employees may be assigned additional duties as needed. Requirements may be adjusted to accommodate disabilities, except where they pose a direct safety risk.

Perks and Benefits

Forgen offers a comprehensive benefits package, including medical, dental, vision, retirement plans, bonuses, paid time off, and more. We support a flexible work model for most non-craft positions and provide additional perks like education assistance, wellness programs, and employee awards.

Senior Engineer, Systems Engineering

About Otto Aerospace  

OTTO is developing the world’s first fifth-generation business jet, designed for sustainability through the innovative use of advanced super-laminar aerodynamics and high-precision, net-shaped composites. Flight tests of our technology demonstrator validate a dramatic reduction in fuel burn and allow for a sizeable improvement in cabin comfort. Otto Aerospace is designing world-class aircraft from first principles of physics and delivering ground-breaking aircraft and economic performance.  

 About the Role  
Otto Aerospace is seeking a dynamic engineer to join our Aircraft Integration Team. The ideal candidate will have a background in aerospace systems engineering with familiarity with systems typically found on Part 23 and Part 25 aircraft including landing gear, fuel system, flight controls, avionics, environmental controls, etc. You will be joining a team developing the world’s most efficient aircraft. Otto Aerospace is seeking first principles engineers who work great in a team atmosphere and know how to get things done 
  

What You'll Do  

• Define aircraft and system requirements in line with Otto’s mission objectives and regulatory requirements
• Participate in validation and verification planning with system owners to ensure successful traceability to the aircraft-level requirements 
• Document and maintain certification requirements necessary for entry-into-service
• Help maintain a database of aircraft level requirements for design teams to reference
• Work with different teams to resolve cross functional design issues 
• Define and show compliance for aircraft systems to 14 CFR Part 23 and Part 25 regulatory certification requirements
• Work with pilots to develop requirements for operations and flight quality
• Work with maintenance and operation experts on meeting reliability and maintainability targets

Who You Are  

Education  

• B.S., in Mechanical or Aerospace Engineering, or equivalent.

Experience  

• 7+ years of Systems Engineering experience, preferably in aerospace 
• Knowledge of mechanical and electromechanical systems common in modern Part 23 / Part 25 business aircraft
• Experience with aerospace requirements management software like JAMA, DOORS, Magic, or similar
• Knowledge of FAR Part 23 and Part 25 certification requirements 
• Understanding and experience with RTCA DO-160G, DO-254, DO-178, SAE ARP4754A and ARP4761
• Knowledge of industry standards and hands-on experience 
• Overall knowledge of mechanical systems, propulsion, and structures and key interfaces to aircraft system
• Strong verbal and written communication skills 
• Ability to closely coordinate with manufacturing to support MRB activities

 Required Skills 

• Active Listening: Practice to gain insight and truly understand all project stakeholders
• Critical Thinking: Make prompt, informed and value-based decisions for the project
• Organization: Focus on agenda, schedules, frameworks, and methodologies, as well as communicating tasks, updates, progress, and blockers
• Problem Solving: Assess issues from different vantage points and formulate the best solution in addressing specific challenges
• Self-Motivation: Exude highest level of commitment and motivation to see it through from start to finish
• Teamwork and Team Building: Establish a collaborative culture where people with unique personalities and skills happily work together and accountable to shared goal 
• Strong Business Communication: Use the right language, tone and storytelling techniques when communicating, describing, or explaining issues over email, chat, reports, presentations and other forms and channels of communication 

 Where You'll Be  

** This role will initially be remote with 25% travel to our temporary facility at Meacham Airport in Fort Worth, TX. In mid to late 2026, or once our new headquarters in Jacksonville, FL is ready for occupancy, the role will transition to onsite at that location.   

Benefits  

 Otto Aerospace provides a robust benefits package that includes competitive salaries, subsidized medical, dental, and vision coverage, 401(k) opportunities, paid short term disability, voluntary long-term disability and additional term life, with 15 paid days off, 13 paid company holidays, and paid sick leave. Depending on seniority and role, some roles qualify for potential bonuses and stock options.  

 Otto Aerospace is an Equal Opportunity Employer   

We are committed to diversity, equity, and inclusion in every aspect of our hiring process. All applicants will be considered for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability. We believe that a diverse team brings fresh perspectives, innovative ideas, and greater success. The more inclusive we are, the stronger we become. Applicants must be legally authorized to work in the U.S.  

#LI-Remote

Job Description: 

ChenMoore is hiring an entry level or early career Electrical Engineer. Candidates should be able to efficiently plan and organize their workload with their team, demonstrate success working with a team of professionals, a commitment to quality, good communication skills, and a positive work ethic. 

Responsibilities:

• Candidate shall work on various aspects of electrical engineering design, plan preparation, permitting and construction oversight while working in a project team environment.
• Candidate would contribute to projects including collecting existing utility data; performing modeling and simulation; distribution, transmission, substation, protection & controls.
• Prepare project design drawings within MicroStation and/or AutoCAD.
• Develop project specific detail drawings.
• Calculate project construction quantity estimates.
• Assist with technical specifications, cost estimates, reports, schedules, and other related tasks.
• Learn and adhere to client-specific standards.
• Coordinate with team members and client representatives.
• Periodic travel to project sites for field investigation and or construction support.
• Project outlines, project initiation, project schedules, project executions, and project closeout.
• Interface with multi-disciplinary design teams.

Qualifications:

• Must possess a bachelor’s degree in electrical or mechanical or environmental engineering.
• Master’s degree is a plus.
• 0 - 2 years of experience working for a firm in the A/E/C industry.
• The expectation is that such candidate would be working towards becoming a Professional Engineer (P.E.)
• Excellent technical writing skills
• Outstanding organizational skills
• Strong sense of urgency, project responsibility and initiative
• Ability to work independently and as part of a team.
• Excellent verbal, written and interpersonal skills.
• Ability to quickly learn and apply complex systems.

About the Position

Dexis is seeking up to two Senior Programmers to provide the J8-S with high quality, defendable programming and technical support. The Senior Programmer works as an interface between the programmers and the subject matter experts to ensure that models developed fully and accurately translate and represent the special operations capabilities. They will be responsible for day to day management of programming efforts and ensure new hardware requirements, IT maintenance requirements, and software upgrades are articulated to the Task Lead. The Senior Programmer will assist the task lead in developing work plans for programmers, database administrator, and network manager, and will keep the Task Lead appraised of information technology resources necessary to complete tasks in accordance with scheduled milestones and budgetary constraints. They will perform quality checks of all programming products and interact continually with the Task Lead to discuss concerns, and ensure total product/service satisfaction.

The mission of the USSOCOM J8-S is to provide senior leadership independent analysis and studies involving current and future Special Operations Force (SOF) requirements, inform J8 decisions in development of the USSOCOM Program Objective Memorandum (POM), and inform and collaborate with Office of the Secretary of War (OSW) in developing various analytic products and guidance. Additionally, the division plays a key role providing reliable analytic tools and products enabling the Command’s senior leaders to make informed and defendable resourcing decisions. Additionally, the J8-S provides a wide range of analytic support to the headquarters; the analytic support provided by the J8-S team has wide reaching impact on component commands, Theater Special Operations Commands (TSOCs), the Joint Staff (JS), and OSW.

This full-time position is located in the Tampa area and is required to be on-site full time, subject to change if requirements shift. This position is contingent upon contract award.

Responsibilities

• Provide Senior-level programmers the requisite skills to accomplish programming and development tasks to support the J8.
• Perform duties as Baseline and Privileged Use Certified Information Assurance Technical (IAT) Level II in accordance with DoW 8570.01-M, DOW Instruction 8140.01, USSOCOM Manual 380-3, and the SIE OPORD.
• Oversee development of software coded solutions, to include: modeling and simulations, spreadsheets, data entry, web, geographic information systems (GIS) and database efforts to support requests for data.
• Provide technical expertise with regards to hardware requirements and software modeling/coding efforts
• Complete software programming, bug fixes, and integration activities
  • Primary developer/integrator for JMA models (SCRAAM, and SOFAMS) and tools (including Leveler/Grapher, Reporter, Date Movement Tool, Scenario Grouper, Resource Set Shaper, Scenario Disengagement Tool, and the Scenario Pass and Priority Tool).
  • Oversee coding and integration of contractor developed new software models and tools.
• Oversee and assemble model documentation.
• Liaison with the Database Administrator, and Network Systems Engineer for software design, database design, hardware configurations and communication requirements.
• Maintain software and data on the system including SOFAMS and associated databases, SCRAAM, the Special Operations Forces Ammunition Requirement Model (SOFARM), SOF Logistics Model, and other analytic products.
  • Support the Development Network through continuous software development to include testing and refinement of models and tools.
  • Modify/develop/train on the use of software to meet USSOCOM modeling software requirements as required.
  • Act as the software application administrator for software residing on the JMA LAN, for software residing on J8-S desktop computers used to collect and analyze JMA data, and for any required Commercial Off-The-Shelf (COTS) software. This includes databases containing climatic, threat, environmental, and weapon system performance data (friendly and hostile); data input forms, digital mapping systems used for data input, extraction, and display; quality control tools for examining the database entries; and the software that utilizes the JMA database.
  • Install, test and maintain software upgrades when provided and/or directed by the Government, to include periodic version upgrades to correct problems, improve efficiency and usability, and/or provide greater capability.
  • Interface with the Global Force Management (GFM) and the GSOS process to determine model requirements (inputs), manage data fidelity, analyze results; and develop model products. Develop software tools; maintain the database, and design model products and web-based interfaces.
  • Provide a continuously updated version of SOFAMS as the primary software model that tracks requirements. Provide the J8-S the software for each functional SOA to enter CONOPs in all mission areas (Special Forces, Ranger, MARSOC, NSW, MISO, CAO, ARSOAC & AFSOC).
  • Provide and maintain a Leveler Module compatible with the SOFAMS software to track and illustrate all requirements entered using the SOFAMS software.
  • Maintain and provide continuous upgrades to the SCRAAM model to match time-based resources to requirements constrained by user-developed rules.
• Provide development and maintenance capability to maintain the stand-alone network crucial to the mission of the J8-S that is configured to operate models simultaneously, multiple databases and support the variety of analysis required of the J8-S.
• Evaluate and make recommendations on new hardware and software with the objective of increasing efficiency, productivity, accuracy, and integration within the JMA system.
• Evaluate and make recommendations on the impact of new or emerging technologies on SOF capability assessments, analyses, and processes using JMA data, data from other approved databases, historical data, models, and analytic tools whenever possible to ensure the integrity of methodologies and the continuity of relevant analytic processes throughout the command.
• Provide insights and recommendations regarding potential new technology needs that have been derived from the JMA SOFAMS or as a result of JMA related analyses. This support shall include the critical evaluation of existing methodologies, processes, models and analytic tools as well as new commercial and Government-owned software and models. All contractor proposed changes to any part of the Network Suite System must be approved by J8-S.
• Use the latest database design and support methodologies to enhance retrieval of stored data and to ensure the fastest retrieval speeds and higher operating efficiencies.
• Re-evaluate the database structure during the production phase of the JMA cycle and make recommendation to determine where improvements could be made.
• Evaluate, integrate, install, test and maintain new software components to increase the reliability and efficiency of the JMA databases.
• Ensure analysts can enter data, define data queries, and use analytic tools to examine and analyze the results. Create on-line tutorials and help files, commercially available programmed instruction, self-paced manuals and drill tasks, and manuals requiring instructor interface.
• Document processes and training developed to ensure that a historical record is maintained. SCRAAM and SOFAMS training files will include, but is not limited to: CONOP modeling; data collection tools; the use of analytic tools in support of force, platform, and equipment analyses.

A lead Senior Programmer will be identified and have the following additional duties:

• Work as an interface between the programmers and the subject matter experts to ensure that models developed fully and accurately translate and represent the special operations capabilities
• Be responsible for day to day management of programming efforts and ensure new hardware requirements IT maintenance requirements, and software upgrades are articulated to the Task Lead.
• Assist the task lead in developing work plans for programmers, database administrator, and network manager.
• Keep the Task Lead appraised of information technology resources necessary to complete tasks in accordance with scheduled milestones and budgetary constraints.
• Perform quality checks of all programming products and interact continually Task Lead to discuss concerns, and ensure total product/service satisfaction.

Qualifications 

• Bachelor's Degree in Computer Science, Management Information Systems or related Information Technology discipline
• 10+ years of development experience in a role as Programmer/Analyst, Senior Programmer or Application Developer. Experiences shall include:
  • Systems Analysis and Design, Systems Architecture or Data Modeling
  • RDBMS and/or NoSQL/Non-relational database development, to include the writing of advanced queries and stored procedures
  • Development of various COTS/GOTS software applications and solutions using various development languages or frameworks such as: .Net/JAVA/JavaScript/Python/R
• 2 years of experience (can be concurrent with the 10 years above) performing the role of Lead Developer and/or Data Architect.
• Baseline and Privileged Use Certified Information Assurance Technical (IAT) Level I; IAT Level II must be obtained within 6 months of start date
• Top Secret Clearance desired but must possess a current DoW Secret clearance, and be upgradable to Top Secret within 4 months and eligible for SCI access and ACCM read-on.

ESA seeks a highly motivated Water Resource Engineer to join our team of engineers and scientists in the Southeast region. We are looking for a dedicated and enthusiastic team member with 10+ years of work experience with progressing management experience, a passion for water resources and restoration, and the desire to learn and grow. This is a full-time, overtime-exempt role. Strong preference given to candidates within a 1-hour commutable distance to one of these ESA Office locations: Tampa or Orlando. Qualified candidates located elsewhere in Florida (or willing to relocate to Florida at their own expense) will also be considered. 

This role will involve some travel and field work as needed for in-person team collaborations and site visits as-needed. This is an in-office role, with the potential for hybrid flexibility with proven performance and supervisor approval. Qualified Florida remote candidates may be considered.

Who You Are 

• Water resources engineer with 10+ years of professional experience with an emphasis on freshwater restoration design within the southeastern United States, preferably Florida and some project management experience.
• You hold a Bachelor’s degree or higher in civil or environmental engineering, or a closely related discipline and are a professionally licensed engineer (PE). A Florida Professional Engineers license is desirable.  If not licensed in Florida, willing and able to obtain licensure within 6 months of hire. 
• You are enthusiastic and experienced in designing moderately complex freshwater restoration projects including water control structures, ditch blocks, low water crossings, weirs, seepage swales, and grading as well as rehabilitation/repair of water control structures.
• You have prepared design plans for a variety of projects and have knowledge of state and federal regulations related to implementation, permitting or monitoring of water resource projects.
• You have experience with preparing technical specifications, engineer opinion of probable costs, and construction bid packages
• You are experienced in performing field inspections of existing water control structures and evaluation of existing water control system designs in freshwater, riverine, or tidal systems (Florida experience preferred).
• You are highly familiar with steps to gather data, perform analyses, prepare reports, and communicate results, including working closely with colleagues in related fields.
• You possess strong skills and experience using Microsoft tools, design and mapping software such as AutoCAD, ArcGIS, or others.
• You have experience with stormwater hydrology and hydraulic modeling (i.e. SWMM, WWHM, TRUST, HEC-RAS, ICPR etc.).
• You are an effective communicator who fosters teamwork and inclusion, and shares knowledge and expertise with more junior staff through mentoring and direct supervision. 
• You are an effective team member who proactively identifies and contributes constructively to address project or team issues to foster collaboration. 
• You present information clearly and speak persuasively about complex topics to clients, agency staff, teaming partners, other project stakeholders and the general public. 
• Experienced in project management including preparing scope and fee proposals.
• You have led, managed, mentored, and/or supervised multidisciplinary teams including delegating and guiding junior-level staff through simple to complex tasks.
• You can work independently from our Florida offices and are able to perform field visits through the state of Florida, Alabama, and others as project needs arise. Hybrid remote working may be considered after onboarding and job training, with proven performance and supervisor approval.
• You enjoy fieldwork and can walk long distances carrying a backpack; and are able to lift at least 50 pounds. You are confident working outside, in remote and rural settings, as well as in urban environments. Physical outdoor work may include, but may not be limited to, work in all types of weather, traversing uneven ground and sometimes steep terrain in vegetated environments, agricultural fields, arid lands, and along stream banks. You may be exposed to inclement weather and uncomfortable working conditions. Some early morning, late night and/or weekend work, as well as long hours may be required
• Must hold a valid driver's license with a clean DMV record
• Preference given to qualified candidates with any of the following skillsets:
  • Proficiency in hydrodynamic and water quality numerical simulation modeling and analyses (Princeton Ocean Model, EFDC, CH3D, WASP, CE-QUAL-ICM, CE-QUAL-W2, QUAL2K) in rivers, lakes, estuaries, and/or coastal areas
  • Proficiency in ArcGIS Pro and Hydro Tools
  • Familiar with Florida ecosystem
  • Experience with performing construction observations
  • Experience with surveying and field data collection
  • Experience with performing drainage design for Department of Transportation projects
  • Skilled in identification of vegetation and/or soils
  • Comfortable working in and around freshwater, are able to walk long distances carrying a backpack, and able to lift at least 50 pounds. 
  • Certified/Trained Boat Operator

What You Will Do for ESA

 You will lead, manage, and assist with the preparation of freshwater resources analyses, reports, designs, permit applications, construction drawings, technical specifications and other project documentation.

• You will have the opportunity to lead, manage, or participate in topographic, geologic, natural resource and related field data collection to support engineering analysis and design.
• You will collaborate with engineers, ecologists, hydrologists, geomorphologists, numerical modelers, landscape architects, biologists, and other specialists in advancing restoration approaches and other project solutions from concept to implementation.
• Provide mentorship and support for more junior staff, including reviewing their work for accuracy and clarity and providing constructive feedback and career development guidance while working on projects together.  
• Demonstrate your understanding of project management principles and practices and be responsible for the development of design and permitting documents in accordance with applicable guidelines and requirements, while delivering assignments within budget and schedule.  
• Consistently demonstrate your solid writing skills and excellent oral and presentation skills while participating in and/or leading client and agency meetings, and marketing tasks including having the responsibility for preparing scopes of work and budgets for proposals or contract negotiations, providing technical input, and participating in interviews or industry conferences.  
• You will thrive in a fast-paced, challenging environment and be able to manage multiple responsibilities and deadlines, while working as a team or independently.
• Live in Florida and be available for occasional travel to project sites, industry conferences and team collaboration events.
• Other ad hoc tasks as needed

What’s Special About Our Team

By joining our team in the Southeast, you’ll become part of the local region’s strong culture where we value creative thinking, teamwork, and multi-disciplinary integration and have ample opportunities for cross-disciplinary engagement and project exposure. You’ll also benefit from the expertise of our national Engineering Hydrology & Design (EH&D) group. Our EH&D team includes engineers, hydrologists, geomorphologists, scientists and water quality specialists who provide expertise for many municipalities in the Southeast, Pacific Northwest, Southern and Northern California. 

Locally and nationwide, ESA’s work matters because it helps communities shape a positive future for their citizens. 

To read about some of our exciting projects check out these links: Lemon Bay Preserve, Balm-Boyette Stallion Creek Restoration,  Surface Water Improvement Plans, Rock Creek Ponds Ecosystem Restoration, Tidal Creeks Water Quality Assessment Framework and Florida RESTORE Act

What’s Special About ESA

Joining ESA means becoming part of a close-knit team of environmental professionals who contribute to outstanding projects, improve environmental stewardship, and advance a more sustainable and resilient future for our communities and wild places.

At ESA, we provide benefits such as medical, dental, and vision insurance (paid at 70% for you AND your family), annual allocations of company share through our ESOP, a 401(k) plan with company match, and paid vacation, sick leave, and holidays, to name a few.

We also provide specific programs whether you want to further your technical expertise, sharpen your business acumen, or help lead the next generation of employee-owners. We want to support you in reaching your career goals through tuition reimbursement, professional development bonuses, and attendance at conferences.

ESA seeks a highly motivated Water Resource Engineer to join our team of engineers and scientists in the Southeast region. We are looking for a dedicated and enthusiastic team member with 5+ years of work experience, a passion for water resources and restoration, and the desire to learn and grow. This is a full-time, salaried, overtime-exempt role. Strong preference given to candidates within a 1-hour commutable distance to one of these ESA Office locations: Tampa or Orlando. Qualified candidates located elsewhere in Florida (or willing to relocate to Florida at their own expense) will also be considered. 

This role will involve some travel and field work as needed for in-person team collaborations and site visits as-needed. This is an in-office role, with the potential for hybrid flexibility with proven performance and supervisor approval. Qualified Florida remote candidates may be considered.

Who You Are 

• Water resources engineer with 5+ years of professional experience with an emphasis on freshwater restoration design within the southeastern United States, preferably Florida.
• You hold a bachelor’s degree or higher in civil or environmental engineering or a closely related discipline and are a professionally licensed engineer (PE). A Florida Professional Engineer's license is desirable.  If not licensed in Florida, expected to be willing and able to obtain FL licensure within 12 months of hire. 
• You are enthusiastic and experienced in designing moderately complex freshwater restoration projects, including water control structures, ditch blocks, low water crossings, weirs, seepage swales, and grading, as well as rehabilitation/repair of water control structures.
• You have prepared design plans for a variety of projects and have knowledge of state and federal regulations related to implementation, permitting or monitoring of water resource projects.
• You have experience with preparing technical specifications, engineer opinion of probable costs, and construction bid packages
• You are experienced in performing field inspections of existing water control structures and evaluation of existing water control system designs in freshwater, riverine, or tidal systems (Florida experience preferred).
• You are highly familiar with steps to gather data, perform analyses, prepare reports, and communicate results, including working closely with colleagues in related fields.
• You possess strong skills and experience using Microsoft tools, design and mapping software such as AutoCAD, ArcGIS, or others.
• You have experience with stormwater hydrology and hydraulic modeling (i.e. SWMM, WWHM, TRUST, HEC-RAS, ICPR etc.).
• You are an effective communicator who fosters teamwork and inclusion, and shares knowledge and expertise with more junior staff through mentoring and direct supervision. 
• You are an effective team member who proactively identifies and contributes constructively to address project or team issues to foster collaboration. 
• You present information clearly and speak persuasively about complex topics to clients, agency staff, teaming partners, other project stakeholders and the general public. 
• You can work independently from our Florida offices and are able to perform field visits through the state of Florida, Alabama, and others as project needs arise. Hybrid remote working may be considered after onboarding and job training, with proven performance and supervisor approval.
• You enjoy fieldwork and can walk long distances carrying a backpack; and are able to lift at least 50 pounds. You are confident working outside, in remote and rural settings, as well as in urban environments. Physical outdoor work may include, but may not be limited to, work in all types of weather, traversing uneven ground and sometimes steep terrain in vegetated environments, agricultural fields, arid lands, and along stream banks. You may be exposed to inclement weather and uncomfortable working conditions. Some early morning, late night and/or weekend work, as well as long hours may be required. 
• Must hold a valid driver's license with a clean DMV record.
• Preference given to qualified candidates with any of the following skillsets:
  • Proficiency in hydrodynamic and water quality numerical simulation modeling and analyses (Princeton Ocean Model, EFDC, CH3D, WASP, CE-QUAL-ICM, CE-QUAL-W2, QUAL2K) in rivers, lakes, estuaries, and/or coastal areas
  • Highly skilled in AutoCAD Civil 3D
  • Proficiency in ArcGIS Pro and Hydro Tools
  • Familiar with Florida ecosystem
  • Experience with performing construction observations
  • Experience with surveying and field data collection
  • Experience in performing drainage design for Department of Transportation projects
  • Skilled in identification of vegetation and/or soils
  • Knowledge of preparing scope and fee proposals.
  • You have led, managed, mentored, and/or supervised multidisciplinary teams including delegating and guiding junior-level staff through simple to complex tasks
  • Comfortable working in and around freshwater, are able to walk long distances carrying a backpack, and able to lift at least 50 pounds 
  • Certified/Trained Boat Operator

What You Will Do for ESA

• You will lead, manage, and assist with the preparation of freshwater resources analyses, reports, designs, permit applications, construction drawings, technical specifications and other project documentation.
• You will have the opportunity to lead, manage, or participate in topographic, geologic, natural resource and related field data collection to support engineering analysis and design.
• You will collaborate with engineers, ecologists, hydrologists, geomorphologists, numerical modelers, landscape architects, biologists, and other specialists in advancing restoration approaches and other project solutions from concept to implementation.
• Provide mentorship and support for more junior staff, including reviewing their work for accuracy and clarity and providing constructive feedback and career development guidance while working on projects together.  
• Demonstrate your understanding of project management principles and practices and be responsible for the development of design and permitting documents in accordance with applicable guidelines and requirements, while delivering assignments within budget and schedule.  
• Consistently demonstrate your solid writing skills and excellent oral and presentation skills while participating in and/or leading client and agency meetings, and marketing tasks including having the responsibility for preparing scopes of work and budgets for proposals or contract negotiations, providing technical input, and participating in interviews or industry conferences.  
• You will thrive in a fast-paced, challenging environment and be able to manage multiple responsibilities and deadlines, while working as a team or independently.
• Live in Florida and be available for occasional travel to project sites, industry conferences and team collaboration events.
• Other ad hoc tasks as needed

What’s Special About Our Team in the Southeast

By joining our team in the Southeast, you’ll become part of the local region’s strong culture where we value creative thinking, teamwork, and multi-disciplinary integration and have ample opportunities for cross-disciplinary engagement and project exposure. You’ll also benefit from the expertise of our national Engineering Hydrology & Design (EH&D) group. Our EH&D team includes engineers, hydrologists, geomorphologists, scientists and water quality specialists who provide expertise for many municipalities in the Southeast, Pacific Northwest, Southern and Northern California. 

Locally and nationwide, ESA’s work matters because it helps communities shape a positive future for their citizens. 

To read about some of our exciting projects check out these links: Lemon Bay Preserve, Balm-Boyette Stallion Creek Restoration,  Surface Water Improvement Plans, Rock Creek Ponds Ecosystem Restoration, Tidal Creeks Water Quality Assessment Framework and Florida RESTORE Act

What’s Special About ESA

Joining ESA means becoming part of a close-knit team of environmental professionals who contribute to outstanding projects, improve environmental stewardship, and advance a more sustainable and resilient future for our communities and wild places.

At ESA, we provide benefits such as medical, dental, and vision insurance (paid at 70% for you AND your family), annual allocations of company share through our ESOP, a 401(k) plan with company match, and paid vacation, sick leave, and holidays, to name a few.

We also provide specific programs whether you want to further your technical expertise, sharpen your business acumen, or help lead the next generation of employee-owners. We want to support you in reaching your career goals through tuition reimbursement, professional development bonuses, and attendance at conferences.

ESA seeks a highly motivated Coastal Engineer to join our team of engineers and scientists in the Southeast region. We are looking for a dedicated and enthusiastic team member with 2+ years of work experience, a passion for coastal processes and restoration, and the desire to learn and grow. This is a full-time and exempt role with office and field work expected. Strong preference given to candidates within a 1-hour commutable distance to one of these ESA Office locations: Tampa or Boynton Beach. Qualified candidates within a 1-hr commutable distance to other ESA offices including Sarasota, Orlando, & Pensacola will also be considered.  This role will involve some travel and field work as needed for in-person team collaborations and site visits as-needed. This is an in-office role, with the potential for hybrid flexibility with proven performance and supervisor approval.

Who You Are 

• 2+ years of professional experience in coastal analyses with an emphasis on living shorelines, beach nourishment, dredging, inlet management, or natural systems restoration.
• You hold a bachelor’s degree or higher in coastal, environmental, civil, or ocean engineering, or a closely related discipline.
• You are enthusiastic and experienced in performing analyses to support the design or monitoring of beach, dune, shoreline, inlet, or creek enhancement and restoration projects.
• You are familiar with steps to gather data, perform analyses, prepare reports, and communicate results, including working closely with colleagues in related fields.
• You possess skills and experience using Microsoft tools, design, and modeling software such as AutoCAD, ArcGIS, MATLAB, or others.
• You are an effective communicator who fosters teamwork and inclusion. You present information clearly and work in an organized manner.
• You possess effective time management skills. 
• You accept feedback willing and are eager to learn from a variety of senior staff through project work, direct supervision and in-house mentoring programs.
• You can work independently from our Florida offices and are able and willing to travel for and perform occasional field visits through the state of Florida, Alabama, and others as project needs arise (coastal).
• You enjoy fieldwork and can walk long distances carrying a backpack; and are able to lift at least 50 pounds. You are confident working outside, in remote and rural settings, as well as in urban environments. Physical outdoor work may include, but may not be limited to, work in all types of weather, traversing uneven ground and sometimes steep terrain in vegetated environments, agricultural fields, arid lands, and along stream banks. You may be exposed to inclement weather and uncomfortable working conditions. Some early morning, late night and/or weekend work, as well as long hours may be required.
• Must have valid driver's license
• Live near Tampa or Boynton Beach offices and be available for occasional travel to project sites, industry conferences and team collaboration events.  Qualified candidates within a 1-hr commutable distance to other ESA offices including Sarasota, Orlando, & Pensacola will also be considered.
• Preference given to qualified candidates with any of the following preferred skillsets:
  • Experience with performing construction observations during active coastal construction projects such as dredging, beach nourishment, coastal structures, living shorelines, wetlands creation, artificial reefs or other.
  • Experience with field data collection related to coastal projects: waves, currents, beach profiles, sediment sampling, natural resources, geophysical or geotechnical data.
  • Experience with environmental permitting (USACE, FDEP, other).
  • Scientific diving or snorkeling experience.
  • Certified/Trained Boat Operator

What You Will Do for ESA

• You will assist with the preparation of coastal processes analyses, reports, designs, permit applications, construction drawings, technical specifications and other project documentation.
• You will have the opportunity to participate in hydrographic, topographic, geologic, natural resource and related field data collection to support engineering analysis and design.
• You will collaborate with engineers, scientists, hydrologists, geomorphologists, numerical modelers, landscape architects, ecologists, biologists, and other specialists in advancing coastal resilience and restoration approaches and other project solutions from concept to implementation.
• Consistently demonstrate your solid writing skills and prepare draft documents that are clear, concise, well-written and supported.
• You will thrive in a fast-paced, challenging environment and be able to manage multiple responsibilities and deadlines, while working on a team or independently.
• Provide peer review for the work of others and take initiative to provide mentoring to more junior staff.
• Other ad hoc tasks as needed

What’s Special About Our Team

By joining our team in the Southeast Engineering & Hydrology Design (EHD) Team, you’ll become part of the local region’s strong culture where we value creative thinking, teamwork, and multi-disciplinary integration and have ample opportunities for cross-disciplinary engagement and project exposure. You’ll also benefit from the expertise of our national Engineering Hydrology & Design (EH&D) group. Our EH&D team includes engineers, hydrologists, geomorphologists, scientists and water quality specialists who provide expertise for many municipalities in the Southeast, Pacific Northwest, Southern and Northern California. You will have the opportunity to be exposed to well-respected technical leaders nationwide.

Locally and nationally, ESA’s work matters because it helps communities shape a positive future for their citizens. 

To read about some of our exciting projects check out these links: Sebastian Inlet District, Philippe Park Living Shoreline, Fowl River, Surfers Point Shoreline Management, Ocean Beach Master Plan, Lemon Bay Preserve, Balm-Boyette Stallion Creek Restoration and Florida RESTORE Act

What’s Special About ESA

Joining ESA means becoming part of a close-knit team of environmental professionals who contribute to outstanding projects, improve environmental stewardship, and advance a more sustainable and resilient future for our communities and wild places.

At ESA, we provide benefits such as medical, dental, and vision insurance (paid at 70% for you AND your family), annual allocations of company share through our ESOP, a 401(k) plan with company match, and paid vacation, sick leave, and holidays, to name a few.

We also provide specific programs whether you want to further your technical expertise, sharpen your business acumen, or help lead the next generation of employee-owners. We want to support you in reaching your career goals through tuition reimbursement, professional development bonuses, and attendance at conferences.

As a Coastal Engineer at RES, you’ll bring deep technical expertise and leadership to coastal resilience projects in Florida. You’ll serve as a subject matter expert in your discipline—leading and assisting teams through innovative and complex coastal resilience projects requiring regulatory approvals, project delivery, and implementation. You’ll play a key role in leading the coastal design projects, mentoring junior staff, driving quality across multiple projects, and guiding our clients through technically and logistically challenging resilience efforts. See some of the projects our engineers work on here.

Why You’ll Love This Job

• RES is a leader in innovative nature-based solutions, including coastal adaptation – you will be at home.

• You’re the go-to expert. Whether your specialty is stream geomorphology or BMP design, your experience and insights guide some of our most critical technical decisions.
• You’ll get to lead and grow others. You’ll manage projects and mentor junior engineers—shaping not only deliverables but the next generation of RES leaders.
• Your work will be built. You’ll see your designs come to life on the ground, with opportunities to participate in fieldwork and construction oversight.
• You’ll have client-facing influence. You’ll help build partnerships, manage contracts, and ensure that our technical solutions meet real-world needs.
• You’ll work at the intersection of ecology and engineering. Whether you're restoring an eroding shoreline in response to degradation including climate change or creating a water quality enhancement project to uplift an estuary, your work will make a measurable environmental impact.

A Day in the Life

You may start your day by reviewing a design or plan sets for an artificial reef project headed for agency review. Tacos for lunch. Midday, you're on a call with a client to walk through design revisions, balancing technical needs with site constraints and budget. Later, you’re reviewing erosion and sediment control details submitted by a junior engineer for a coastal shoreline project in Miami—offering feedback and making sure it aligns with regulatory standards.

Depending on the project phase, you might lead a shoreline conditions assessment, design a nature based coastal enhancement, evaluate value engineering for a permitted project, develop permit plans or verify construction matches the plans as the Engineer of Record. Throughout the day, you will lead conversations with marine scientists, engineers, clients, and regulators that are part of the RES Team —turning complex challenges into clear solutions and ensuring projects stay on track and consistent with permits.

We would love to talk to you if you have many of the following:

• Bachelor’s or Master’s degree in Coastal, Civil or Marine Engineering field
• Licensed Professional Engineer in Florida, or the ability to become licensed within six months through reciprocity if licensed in another state
• 10+ years of progressive engineering experience designing nature-based coastal resilience and waterfront projects such as artificial reefs, living seawalls, breakwaters, mangrove shorelines (8+ years with advanced degree)
• Construction management experience
• Experience leading coastal proposal pursuits
• Advanced proficiency with design tools such as AutoCAD Civil 3D, GIS, coastal modeling software (e.g. MIKE21) or similar platforms
• Demonstrated ability to manage large, complex design projects from concept through construction as design lead
• Experience leading coastal permitting and coordination with federal, state, and county agencies that include Coastal Construction Control Line (CCCL) permitting
• Valid driver’s license in the US for over one year and ability to travel to field sites as needed

What will make you stand out?

• Direct experience with coastal permitting in Miami-Dade, Broward, and Monroe Counties
• Experience securing water quality improvement “credits” for nutrient reductions (TN, TP, TSS) for living shorelines projects
• Experience involving innovative stormwater designs (BMP sizing, regional stormwater standards)
• Direct experience with Federal/State/Local environmental regulations and understanding of the Federal Clean Water Act, State Stormwater Rule, and other state and federal environmental regulations, and permitting processes. 
• Staff management and mentoring experience
• Presentation and public speaking experience

You Will Thrive in This Position If You:

• Are recognized as a subject matter expert in your area of design and enjoy solving challenging technical problems, many times with innovative solutions
• Lead with confidence and clarity—whether managing a field team, mentoring junior staff, guiding a client or negotiating with a regulator
• Balance technical precision with project deadlines, scope, and cost considerations
• Can lead multiple projects and teams simultaneously without losing sight of quality
• Care deeply about ecological function, water quality, and making a measurable environmental impact