** This position is not eligible for visa sponsorship for external candidates. Candidates cannot require sponsorship now or in the future**

Job’s mission

Our Global Sales, Services & Spares IQ and Sustaining teams are seeking Snr Engineers I & II, Field Service (level will depend on experience, degree and responsibilities. Please review below) to join ASM at a customer site (TSMC) in North Valley, AZ. Domestic and International travel of at least 75% will be required for this role. As a Senior Field Service Engineer at ASM, you’ll play a critical role in supporting the advanced semiconductor equipment that powers the world’s most transformative technologies. You’ll take the lead on complex troubleshooting, guide and mentor engineers, and strengthen our partnerships by helping customers achieve stable, high‑performance fabrication environments. Your expertise will make a direct impact on tool reliability, customer satisfaction, and the next generation of ASM technology.

What you will be working on

Senior Engineer I, Field Service

• Install, maintain, and repair ASM semiconductor equipment with minimal supervision
  • Lead troubleshooting of complex tool or process issues using structured diagnostic methods
  • Perform root‑cause analysis and recommend targeted, data‑driven corrective actions
  • Review tool‑performance data to identify trends, risks, or improvement opportunities
  • Provide technical guidance and on‑the‑job coaching to less‑experienced engineers
  • Document service activities and support updates to procedures and best practices
  • Communicate solutions, progress, and expectations clearly with customer engineers
  • Participate in escalations alongside cross‑functional ASM engineering teams

Senior Engineer II, Field Service

• Serve as the senior technical lead for equipment installation, performance optimization, and recovery
• Diagnose and resolve highly complex, multi‑factor tool and process issues with limited guidance
• Lead advanced root‑cause analysis and drive long‑term corrective‑action plans that influence global engineering improvements
•  Own the customer‑technical relationship: build trust, anticipate operational needs, and act as ASM’s senior technical representative onsite
• Manage escalations end‑to‑end, aligning expectations, coordinating cross‑functional teams, and communicating clear action plans
• Guide, mentor, and develop engineers through hands‑on instruction, structured training, and knowledge‑sharing
• Champion best practices and contribute to procedure development, improvements, and field‑wide learning
•  Provide detailed field insights to R&D, product, and design teams, including support for beta tools or early‑option deployments

What we are looking for

Senior Engineer I, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 6+ years of experience, OR a Master’s degree with 4+ years of experience OR PhD degree with 0+ years of experience.
• Experience of semiconductor field service or capital‑equipment experience
• Ability to interpret electronic and electromechanical schematics
•  Experience with structured troubleshooting methodologies
• Knowledge of cleanroom and semiconductor safety protocols
• Strong written and verbal communication skills
• Ability to work independently and collaboratively in fast‑paced fab environments
• Willingness to travel domestically and internationally as needed for the role. 
• Proficiency in MS Office

Senior Engineer II, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 8+ years of experience, OR a Master’s degree with 6+ years of experience OR PhD degree with 4+ years of experience.
• Experience in semiconductor field service experience with demonstrated technical leadership
• Advanced knowledge of tool architecture, control algorithms, and multi‑factor troubleshooting
• Experience driving structured root‑cause analysis and long‑term corrective‑action plans
• Proven ability to lead escalations and manage customer‑technical relationships
• Strong communication and mentorship capabilities
• Ability to work autonomously while guiding and developing other engineers
• Willingness to travel domestically and internationally as needed for the role
• Proficiency in MS Office

What sets you apart

Senior Engineer I, Field Service

• Experience supporting beta tools or early‑option equipment
• Knowledge of wafer‑fab operations, robotics, vacuum systems, plasma, RF, or gas handling
• Experience writing or updating procedures or technical documentation
• Strong customer‑service approach and organizational skills
• Familiarity with structured problem‑solving methods

Senior Engineer II, Field Service

• Demonstrated leadership in complex troubleshooting programs or technical initiatives
• Experience owning customer‑technical relationships, including expectations and long‑term partnership building
• Strong capability in mentoring and developing field engineers
• Hands‑on expertise with fab robotics, vacuum systems, plasma, RF, or gas‑delivery systems
• Experience providing structured feedback to engineering or product teams
• Experience evaluating or supporting beta‑stage or early‑option tools

** This position is not eligible for visa sponsorship for external candidates. Candidates cannot require sponsorship now or in the future**

As a Field Service Engineer – Early Career, you’ll take on a hands-on role supporting ASM’s advanced semiconductor equipment and helping our customers keep their fabs running at peak performance. You’ll build real-world expertise through structured training, mentorship, and on-the-job learning while working directly with technologies that power AI, 5G, cloud computing, and next‑generation devices. This is your chance to apply your engineering background, strengthen your technical capabilities, and join a team that’s shaping the future of semiconductor innovation.

In this role, based in North-Valley/Phoenix, AZ at our customer site, you’ll launch your engineering career at the center of cutting‑edge semiconductor manufacturing. It’s an ideal opportunity for early‑career engineers who want to put their education into practice in a high‑tech environment where every day brings something new to learn.

From your first day, you’ll receive training through hands‑on guidance from seasoned engineers onsite. You’ll work with vacuum systems, plasma, chemical delivery, robotics, sensors, advanced metrology, and complex hardware‑software interactions. Your contributions will have a direct impact on tool performance, system uptime, and customer success—playing a meaningful role in enabling leading‑edge logic technology nodes. This experience lays a strong foundation for rapid growth, technical mastery, and a variety of long‑term career paths within ASM.

Shifts available:

Mon-Fri- 8am-5pm (subjected to OT)

What You Will Be Working On 

• Support installation, maintenance, and repair of ASM semiconductor equipment at customer sites 
• Troubleshoot equipment and process issues with guidance from senior engineers 
• Deliver clear, timely, customer‑focused support with a strong safety mindset 
• Working in cleanroom environments while following strict safety and quality standards.
• Assist in identifying and contributing to continuous improvement efforts  
• Participate in customer escalations alongside experienced team members 

What We Are Looking For 

• Bachelor’s or master’s degree in Electromechanical Engineering, Electrical Engineering, Mechanical Engineering, or related field 
• Candidates who are hands-on and mechanically curious, energized by complex systems and real-world problem solving, Comfortable working in fast paced, hightech environments & motivated to build a long-term engineering career. 
• Internship, co‑op, senior design project, lab research, or hands‑on technical experience 
• Ability to read and interpret basic electronic and electromechanical schematics 
• Understanding of safety protocols and willingness to work in cleanroom environments 
• Strong problem‑solving mindset and eagerness to learn 
• Clear communication skills and a strong customer-service mindset 
• Ability to work independently and collaboratively 
• Willingness to travel domestically and internationally 
• Proficiency with Microsoft Office 

What Sets You Apart 

• Demonstrated commitment to safety, quality, and disciplined execution 
• Exposure to semiconductor processes, wafer fabs, robotics, vacuum systems, plasma, or gas handling 
• Experience writing technical documentation in school or project settings 
• Familiarity with customer‑facing or support roles (internships, tutoring, help desk, teamwork) 
• Interest in structured problem‑solving methods, statistical methods, data analysis. 
• Curiosity and learning orientation when working with advanced semiconductor technologies 
• Participation in engineering clubs, competitions, or technical student groups 

Why join ASM? 

2026 is the year to join ASM as a Field Service Engineer. Apply now! 

We are thrilled to announce an opportunity for a Field Superintendent to join our team and support the construction of some of the most challenging and exciting projects in the Southwest. This includes innovative and impactful work in commercial, industrial, mission-critical, and water/wastewater treatment facilities. If you are passionate about leading dynamic teams and driving excellence in construction, we want to hear from you!

Responsibilities 

• Emphasizes a culture of exceptional safety and best-in-class quality to all foremen and craft, including associated trade partners. 
• Responsible for supporting and developing Foremen, including fostering a positive environment for our craft and trade partners to prosper. 
• Provides guidance and support to the Field Engineer regarding survey and layout needs, including providing a schedule as to when such work is required. 
• Assists the Project Superintendent with project schedule development and maintenance, including pull plans, look-ahead schedules, and implementation of the Last Planner System 
• Prepares work plans for critical work and facilitates detailed reviews of such plans with the Field Engineer and Foreman 
• Understands budgeted values for labor, equipment, and consumables; responsible for collaboratively planning work with the Foremen to be commercially successful. 
• Responsible for ensuring efficient crew sizing and makeup is always present and adjusting when necessary. 
• Ensures Foremen are promptly and accurately completing all necessary reports and documentation for their crews (timesheets, daily reports, safety/quality forms, employee evals etc.) 
• Leads coordination and Support for all QC processes for their specific scope or assigned project. 
• Actively participates in daily and weekly project meetings. 
• Promptly reports field issues to the Field Engineer and Project Superintendent 
• Assists this Field Engineer with the development of lift drawings. 
• Develops rapport with owners, clients, engineers, and trade partners while ensuring contractual compliance with all parties. 

#CORBIND1

• Planning and safe execution of Hazardous energy control, T&E, Working at Heights, and confined space. 

Qualifications   

• Working knowledge of all aspects of construction and industry practices, processes, standards, and their impact on project activities 
• Ability to multi-task, collaborate with others, set priorities, and take initiative. 
• Demonstrated success supporting a team through complex project execution. 
• Experience leading project teams and holding them accountable to project goals. 
• Excellent organizational, verbal, written, presentation skills are a must. 
• Proficiency with Microsoft Office Suite (Outlook, Word, Excel, PowerPoint, etc.) 
• STSC trained. 
• Proficiency with Primavera P6 scheduling software a huge plus. 
• Positive and teachable attitude. 
• Possesses excellent organizational, verbal, written and presentation skills. 

Education & Certifications 

• OSHA 30 Certification 

Safety Level
This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

• The inherent responsibilities of your role may include physical working conditions. In order to safely and successfully perform job duties you must be able to:  
• Potentially lift up to 50 pounds 
• Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing  
• Potentially operate a motor vehicle, crane, tractor, etc.  
• We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance to the Americans with Disability Act (ADA)

As the Virtual Construction Field Engineer, you will support the Nox Innovations virtual design team and broader Nox Group construction installation teams with research and validation in the field. This will include design, trade coordination, layout, installation coordination, and validation.

Responsibilities

• Manage the Asset Routing submissions daily by
  • Providing support to the field on routing processes from Virtual Construction (VC) teams
  • Ensuring routing plans are reviewed and constraints are logged and followed up on by Nox Group’s field personnel and Virtual Construction.
• Coordinate & manage internal and external constraints during the modeling process by
  • Maintaining a daily VC constraint log
  • Coordinate constraint resolution
  • Attend VC internal and external coordination meetings to document and coordinate constraints and assist in coordination resolution
  • Monitor & share weekly constraint progression with the project & VC teams
• Assist with the constructability review in the field.  
• Assist the installation team with understanding the scope as needed
• Perform field validations of installation against the design to ensure the design is being followed and report any design to installation deviations to VC Project Engineer
• Provide total station layout points on site as needed.
• Assist installers with knowledge of how to understand and navigate the model and sheet sets, including PF part labels.
• Perform daily coordination between the VC Project Coordinator and the onsite field operations teams to ensure the model and design are aligned.
• Provide updates and support to the VC Project Manager to ensure continuity between the VC Engineers and the onsite Field Operations

Qualifications

• 5+ years’ experience in the construction field, electrical a bonus
• 2+ years’ experience in CAD
• Experience in Project Layout
• Ability to stand for long hours and walk job sites
• Ability to climb a ladder
• Ability to lift up to 45 lbs
• Excellent written and verbal communication ability
• Organized, systematic, and competent in performing detailed tasks
• Has a strong ability to be a team player and leader
• Self-starter and motivated to work efficiently and effectively
• Must possess outstanding interpersonal skills
• Cultural fit—ability to build positive working relationships

Education/Certifications

• High school diploma or G.E.D. equivalent

Safety Level
This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

• The inherent responsibilities of your role may include physical working conditions. In order to safely and successfully perform job duties you must be able to:  
  • Potentially lift up to 50 pounds 
  • Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing  
  • Potentially operate a motor vehicle, crane, tractor, etc.  
• We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance with the Americans with Disability Act (ADA)

#NXCLIND1 

Lucid Motors is seeking a Senior SQA and Test Infrastructure Development Engineer to help build the next generation of test, automation, and validation systems that power our in‑vehicle compute platforms, embedded controllers, and advanced driver‑assistance technologies. You will play a key role in ensuring that Lucid’s software and hardware meet the highest standards of safety, reliability, and performance—supporting everything from firmware development to large‑scale automotive validation.

This role sits at the intersection of DevOps, embedded systems, and automotive test engineering, enabling fast, safe, and scalable development for the world’s most advanced electric vehicles.

What you’ll be doing

• Architect and maintain DevOps pipelines and test automation infrastructure optimized for automotive and embedded development workflows, including cross‑compilation, ECU flashing, and hardware‑in‑the‑loop (HIL) validation
• Build internal tools and services that streamline embedded software testing, firmware deployment, and continuous integration for safety‑critical systems
• Collaborate with Embedded Software, Vehicle Integration, and Test Engineering teams to design scalable test environments for Lucid’s in‑vehicle compute modules and real‑time embedded platforms
• Implement containerized and cloud‑native systems using Docker and Kubernetes to orchestrate distributed test execution across lab and cloud resources
• Integrate automotive‑specific workflows into CI/CD systems, including static analysis, MISRA compliance, traceability, and automated regression testing
• Develop monitoring, logging, and diagnostic tools to ensure high availability and performance of embedded test infrastructure
• Support and extend test frameworks used for ECU validation, vehicle‑level testing, and manufacturing test

What we need to see

• BS/MS in Computer Science, Electrical Engineering, Computer Engineering, or related field
• 5+ years of experience in DevOps, embedded test infrastructure, or automation tooling
• Strong proficiency in Python and experience with frameworks such as Flask or Django
• Experience with embedded Linux, cross‑compilation, and deploying applications to embedded targets
• Familiarity with automotive communication protocols such as CAN bus, or Automotive Ethernet
• Experience with HIL/SIL systems, embedded test benches, or automotive validation environments such as vector Tools
• Proficiency with version control systems such as GIT or GitLab
• Strong Linux knowledge—deployment, debugging, system monitoring, and automation
• Familiarity with bash scripting and Linux‑based automation workflows

Ways to stand out from the crowd

• Background in deploying or maintaining embedded test automation systems, including HIL rigs or ECU validation setups
• Experience with real‑time operating systems (RTOS) or embedded firmware development
• Exposure to manufacturing test environments for automotive ECUs, embedded boards, or in‑vehicle compute modules
• Familiarity with cloud platforms (AWS, Azure, GCP) and infrastructure‑as‑code tools such as Terraform or Ansible
• Passion for building robust CI/CD pipelines and developer‑facing infrastructure for embedded systems

Bonus Qualifications – Agentic AI Tools & Intelligent Automation

Lucid is increasingly leveraging agentic AI systems to accelerate development, automate complex workflows, and enhance test intelligence. Experience with any of the following is a strong plus:

• Building or integrating AI‑driven DevOps agents for automated debugging, test generation, or pipeline optimization
• Experience with LLM‑powered tools for code analysis, anomaly detection, or automated documentation
• Familiarity with AI‑assisted test case generation, including reinforcement‑learning‑based or model‑based testing
• Experience using or developing autonomous agents that interact with CI/CD systems, embedded hardware, or cloud infrastructure
• Knowledge of AI‑driven observability platforms for predictive monitoring, log intelligence, or automated root‑cause analysis
• Understanding of agent orchestration frameworks such as LangChain, LangGraph, or similar tools
• Experience integrating AI agents with automotive workflows such as ECU flashing, HIL orchestration, or embedded diagnostics

Job's Mission:

As a Software Quality Assurance Engineer at ASM, you will ensure the reliability and effectiveness of our software that drives cutting-edge semiconductor processing equipment. You’ll work on testing and qualifying software, streamlining QA processes to align with CI/CD development, and collaborating with talented global teams. Your contributions will directly impact the functionality and performance of advanced hardware in the semiconductor industry.

What you will be working on:

• Design, develop, test, deploy, maintain, document, and improve software test suites.
• Perform both manual and automated testing in simulation environments and on physical semiconductor manufacturing equipment.
• Execute and analyze the functionality of engineering designs compared to intended outcomes, providing valuable feedback.
• Automate, streamline, and maintain QA processes to integrate seamlessly with CI/CD development workflows.
• Develop and implement quality standards, methods, and procedures to enhance existing business processes.
• Work closely with Process Engineering teams to test systems, validate engineering designs, and identify quality improvements.
• Create and manage tests plans and test cases, ensuring thorough validation of software enhancements and defect fixes.
• Gain an understanding of ASM system operations, including mechanical, electrical, and software functionality.
• Document testing procedures and feedback to ensure quality and consistency across projects.

What we are looking for:

• Bachelor’s + 5 years of experience, Master's +3 years OR PhD + 2 years of experience. Degree in Computer Science, Computer Engineering, or a related field.
• Proficiency in programming languages such as Python, C++, or C#.
• Experience with system quality assurance or engineering for complex electromechanical equipment with integrated software controls.
• Strong written and verbal communication skills for interacting with senior leadership and stakeholders.
• Willingness to travel up to 10% of the time.

What sets you apart

• Familiarity with tools like Jira, Confluence, Git, Test Complete, or TestRail.
• Experience in software configuration management or versioning in a software development environment.
• Knowledge of DevOps and CI/CD pipeline setup.

Senior Engineer I, Software Engineering

As part of ASM’s Software Engineering team, you’ll develop advanced control software that drives the most sophisticated semiconductor equipment in the world. Your work will directly impact robotics, gas flow systems, and temperature control hardware—delivering real-time results in chip manufacturing. Based in Phoenix, you’ll collaborate globally and help shape the future of semiconductor automation and factory integration.

Responsibilities:

• Design, develop, test, deploy, and maintain software for semiconductor manufacturing equipment
• Build software for Windows and real-time operating systems
• Troubleshoot and resolve issues in real-time control systems
• Triage mechanical, electrical, and software bugs
• Lead escalation calls with field engineers and global customers
• Collaborate with QA and Support teams to manage regression testing
• Author and review system specifications, software designs, and test plans
• Investigate internal and external problem reports and propose solutions
• Evaluate and recommend software engineering tools
• Participate in system design and scheduling efforts
• Integrate and support factory automation protocols such as SECS/GEM
• Work closely with automation teams to ensure seamless equipment-factory communication

Requirements:

• BS Degree in Computer Science or related field. MS preferred.
• Strong software development skills in C#
• 5+ years’ experience as a generalist or mid-stack software developer
• Experience in the semiconductor industry
• Hands-on experience with factory automation systems
• Familiarity with SECS/GEM, GEM300, EDA/Interface A protocols
• Experience with AMHS (Automated Material Handling Systems)

What sets you apart

• 10+ years in software development and architecture
• Experience with:
  • Machine control software (especially for semiconductor equipment)
  • Windows and real-time operating systems
  • Multi-threaded and real-time applications
  • GUI development and device drivers
  • Networking, data communications, and EtherCAT
  • Dynamic scheduling algorithms with deadlock avoidance

Senior Engineer I, Software Engineering - Factory Automation 

As part of ASM’s Software Engineering team, you’ll develop advanced control software that drives the most sophisticated semiconductor equipment in the world. Your work will directly impact robotics, gas flow systems, and temperature control hardware—delivering real-time results in chip manufacturing. Based in Phoenix, you’ll collaborate globally and help shape the future of semiconductor automation and factory integration.

Responsibilities:

• Design, develop, test, deploy, and maintain software for semiconductor manufacturing equipment
• Build software for Windows and real-time operating systems
• Troubleshoot and resolve issues in real-time control systems
• Triage mechanical, electrical, and software bugs
• Lead escalation calls with field engineers and global customers
• Collaborate with QA and Support teams to manage regression testing
• Author and review system specifications, software designs, and test plans
• Investigate internal and external problem reports and propose solutions
• Evaluate and recommend software engineering tools
• Participate in system design and scheduling efforts
• Integrate and support factory automation protocols such as SECS/GEM
• Work closely with automation teams to ensure seamless equipment-factory communication

Requirements:

• BS Degree in Computer Science or related field. MS preferred.
• Strong software development skills in C#
• 5+ years’ experience as a generalist or mid-stack software developer
• Experience in the semiconductor industry
• Hands-on experience with factory automation systems
• Familiarity with SECS/GEM, GEM300, EDA/Interface A protocols
• Experience with AMHS (Automated Material Handling Systems)

What sets you apart

• 10+ years in software development and architecture
• Experience with:
  • Machine control software (especially for semiconductor equipment)
  • Windows and real-time operating systems
  • Multi-threaded and real-time applications
  • GUI development and device drivers
  • Networking, data communications, and EtherCAT
  • Dynamic scheduling algorithms with deadlock avoidance

Engineer, Software Support

At ASM, our Software Engineering teams works on delivering software that has immediate, tangible results visible in the operation of semiconductor processing equipment hardware. The hardware includes robotics, gas valves, temperature controllers and other hardware.  

As a Software Support Engineer, you will make an impact by investigating, recreating, and troubleshooting software issues to resolution as reported by our customers. 

Responsibilities:

• Gather information to investigate the issue, reproduce it, determine the root cause, and recommend corrective actions. 
• Troubleshoot and resolve software issues, including embedded software for control systems.  Able to triage mechanical, electrical, and software bugs. 
• Responsible for managing escalation calls with field support engineers 
• Create bug reports for the developer to use when fixing the bug. 
• Work with QA to add replicated bugs to the regression. 
• Travel to customer sites to support installations, training, and troubleshooting of ASM products. 
• Talking to the account team and GPS group (not directly with the customer) when investigating reported issues. 
• The team will handle all issues until they are ready to send to the developer.  

Minimum Qualifications 

• BS+ 4 years experience or MS+ in Computer Science, Computer Engineering, or a related field. 
• Ability to read code and diagnose issues.  
• Software development or test (QA) experience. 
• Ability to travel 10-25% domestic and international.

Preferred Qualifications 

• Preferred expertise in C/C++, C#, Python, Gitlab/Github.
• Experience with semiconductor equipment preferred 
• Experience working with two or more of the following is preferred: software for machine control, Semiconductor Factory Automation, Multi-threaded applications, real-time software, device drivers, or other interrupt-driven software 

Senior Engineer, Software Support

At ASM, our Software Engineering teams works on delivering software that has immediate, tangible results visible in the operation of semiconductor processing equipment hardware. The hardware includes robotics, gas valves, temperature controllers and other hardware.  

As a Senior Software Support Engineer, you will make an impact by investigating, recreating, and troubleshooting software issues to resolution as reported by our customers. 

Responsibilities:

• Gather information to investigate the issue, reproduce it, determine the root cause, and recommend corrective actions. 
• Troubleshoot and resolve software issues, including embedded software for control systems.  Able to triage mechanical, electrical, and software bugs. 
• Responsible for managing escalation calls with field support engineers 
• Create bug reports for the developer to use when fixing the bug. 
• Work with QA to add replicated bugs to the regression. 
• Travel to customer sites to support installations, training, and troubleshooting of ASM products. 
• Talking to the account team and GPS group (not directly with the customer) when investigating reported issues. 
• The team will handle all issues until they are ready to send to the developer.  

Minimum Qualifications 

• BS+ 8 years or MS+ 4 years in Computer Science, Computer Engineering, or a related field. 
• Ability to read code and diagnose issues.  
• Software development or test (QA) experience. 
• Ability to travel 10-25% domestic and international.

Preferred Qualifications 

• Preferred expertise in C/C++, C#, Python, Gitlab/Github.
• Experience with semiconductor equipment preferred 
• Experience working with two or more of the following is preferred: software for machine control, Semiconductor Factory Automation, Multi-threaded applications, real-time software, device drivers, or other interrupt-driven software 

Role overview

As a Senior Process Engineer at ASM, you will work with semiconductor processing and analytical equipment to research, develop and optimize processes focused on oxidation, annealing, curing, Atomic Layer Deposition (ALD, PEALD), Epitaxy or PECVD for logic, memory, analog, power, and MEMS applications. You will design and conduct complex experiments, measurements and perform the interpretation of complex experimental output. While you deliver creative and inventive solutions, technical publications, and generation of Intellectual Property (IP) are an essential function of this position. 

Note: This role is intended for candidates who are graduating in Spring 2026 or have graduated within the past two years and have 0–2 years of professional work experience.

Responsibilities 

• Creative problem solver with experience in developing new films for emerging applications and experience in chemistry/materials characterization.
• Works with semiconductor processing equipment to research, develop and optimize unit processes focused on the deposition of metal and dielectric films via ALD, PEALD, Epitaxy, and/or PECVD.
• Bringing innovative ideas, staying abreast of state-of-the-art processing applications in the semiconductor industry to be effective.
• Process consulting and accountability including technical papers on advanced process applications and Intellectual Property creation.
• Participates in and drives technical problem-solving sessions using the related scientific method and industry tools, such as Ishikawa diagrams.
• Designs and conducts experiments, in addition to measuring and interpreting experimental output, aimed at fulfilling stated objectives using Design of Experiments (DOE) and Response Surface Methodology (RSM).
• Troubleshoots equipment problems and is personally and actively engaged in problem via “hands-on” modalities.
• Works with customers and central marketing to understand and define requirements to successfully execute and document customer demonstrations.
• Develops methods and techniques for integrating metal and/or oxide films into existing and future device technologies.
• Ensures successful product transfer to customer base by performing demonstrations, training field service personnel, traveling to support remote sites (up to 10% travel required), and drafting documentation regarding process development, tool operation and maintenance.
• Produces technical papers on process, equipment, and device integration improvement strategies and presents to professional audience.
• You may be assigned supervisory duties over supporting process engineering technicians and aides. These supervisory duties could include direct input into employees’ performance evaluations, discipline, and discharge.

Minimum Qualifications

• We are looking for candidates who have graduated within the last 0-2 years or will graduate in Spring or Fall 2025 and are eager to begin or advance their career.
• Master’s or PhD degree in Chemical Engineering, Materials Science, Electrical Engineering, or Physics.
• 0-7+ years of combined education, research, and work experience with:
• Cure, oxidation, ALD, CVD, Epitaxy, PECVD and/or other thin film deposition.
• Materials characterization techniques such as XPS, SIMS, RBS, AFM, XRR, XRD, TEM, SEM and ellipsometry.
• Knowledge of electrical characterization techniques for CMOS devices.
• Application of dielectric and/or metal films for logic and memory structures.
• Training in CFD (computational fluid dynamics), either theoretical or practical is preferred.
• Knowledge of electrical characterization techniques for CMOS devices is preferred.
• Graduating in Fall 2025 or graduated within the past two years.
• 0–2 years of professional work experience.

Preferred Qualifications

• Ability to independently manage complex process development projects, including personnel, project schedules, experimental thrusts, hardware procurement and budgetary oversight.
• Ability to be a process consultant to internal and external customers.
• An authority on interplay between hardware design (e.g., chemical reactor design) and operation and process outputs
• Understanding of requirements for integration of metals as work function materials and barrier layers in FEOL and BEOL process flows
• Demonstrated ability to develop and completely characterize deposition processes using first principles and experimental design techniques (e.g., DOE, RSM).
• Experience with the theory, practice, and interpretation of materials characterization techniques such as XPS, SIMS, RBS, AFM, XRD, HRTEM, FESEM, Auger, Raman and ellipsometry.
• Excellent verbal and written communication skills, with ability to clearly communicate advanced technical constructs in direct and concise manner.

About the Role

The Ground System Deployments team is looking for an innovative, collaborative and self-driven Civil Project Engineer to join the team to ensure the successful deployment of Zipline’s Ground Systems in all possible applications and configurations. 

This role is well suited to seasoned civil engineers looking to apply their experience designing novel and innovative sites, foundations and structures to advance and accelerate the new and growing industry of  autonomous drone delivery ground systems. 

With broad scope to influence the design of current and next generation systems this role will jopin a stellar team responsible for the site level designs, layouts, civil designs, structural and foundation designs and implementation. Interacting with various mechanical, structural and electrical engineering stakeholders across the organization this role will  ensure the overall system and its site design work hand in hand to ensure the successful deployment of Ziplines Ground Systems within cost and timeline goals. 

This role has a mandate to drive positive change through the organization - as problems or scenarios occur this individual will be tasked with both 0 to 1 problem/project responsibility and also working with the broad engineering and deployments organization to implement foundation changes to product and process as needed. 

This position can be based out of our San Francisco, Dallas or Houston Offices. Onsite is preferred, but this role can be remote flexible with up to 50% travel for the right candidate.

WHAT YOU’LL DO

• Act as the Civil Engineer of Record for Zipline projects in Texas and other jurisdictions
• Create, refine and update civil layouts for the sites. Act as the Zipline representative for any technical clarifications from cities or jurisdictions regarding our designs. 
• Contribute to the civil and site design standards of Zipline sites. 
• Contribute to the pavement, drainage, and sitescape designs and approaches of Zipline sites and structures. 
• Advise on permitting, codes and and other certification efforts relevant to the projects and structures.  
• Engage and interact with cities and relevant inspectors or relevant external parties to ensure timely project approvals and deployment. 
• Ensure relevant and applicable civil strategies are investigated and implemented where appropriate - grading designs, curb designs, pavement designs
• Understand our internal and external customer’s business and needs and work with our internal engineering and business teams to refine and roadmap necessary changes to ensure the successful deployment of the Ground Systems infrastructure. 
• Source and develop relationships with outside organizations (local jurisdiction, utilities, contractors, OEM and material suppliers etc).
• Evaluate all options and a lean budget, select best vendors to ensure reliable and quality services and products.
• Understand and mitigate the preconstruction, construction, operational and sustaining  risks associated with each project. 
• Interact directly with internal and external partners and stakeholders as needed. 
• Domestic travel to project sites expected on an ad-hoc basis. 

WHAT YOU’LL BRING

• Civil Professional Engineering qualification with stamping capacity in Texas (or the ability to quickly obtain stamping capacity in Texas). Ability to stamp in Arizona and other sunbelt states a strong preference, or the ability and capacity to quickly gain this qualification. 
• Bachelor's degree or higher  with minimum 6 years of experience.
• The individual should have an Engineering background (Civil, others acceptable with relevant experience and stamping capacity) and have worked in the construction, electrical design/EPC, or renewable energy industry, or equivalent industries for 4+ years. The individual should have experience (4yrs+) in working with:
  • Civil codes and building standards, and applicable design and management software.
  • Technical Product Management, Technical Program Management or applicable areas.
  • Systems engineering and  system architecture.
  • External design teams (Architectural, Structural, Civil,Electrical MEPs) on commercial or industrial development  / construction projects.
  • Experience with automated logistics, UAV aviation, EVSE Charging, Renewable Energy and Battery Energy Storage Systems or equivalent industries a plus. 

• Strong candidates should have excellent communications skills to:
  • Drive internal alignment of requirements for projects based on business needs.
  • Provide leadership team with updates on scope, schedule and budgets. 
  • Drive external parties for the implementation of real estate projects. 
• Must be eligible to work in the US.

What Else You Need To Know

Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws or our own sensibilities.

We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply!

About the Role:

As the Sales/ Project Engineer for Ziplines Ground Systems and Site Infrastructure, you’ll spearhead the deployment success of Ziplines Offsite Charging sites, the game changing autonomous loading Zipping Point, and other site infrastructure. You’ll be handling all deployment topics, finding innovative solutions that work for partner sites, executing solutions to problems and roadblocks, and driving feedback and product changes to simplify and accelerate the rollout of Ziplines delivery infrastructure. This is a role well suited to technical engineers with great customer engagement skills - you’ll be crafting and designing solutions for new customers by listening to their feedback and needs, providing Zipline's fundamental perspectives and learnings and bringing all stakeholders along for the journey. As part of this you’ll engage in pre-contract discussions as the key technical stakeholder, the lead and manage those projects once signed from initial site evaluation through to construction and initial operation working across internal and external building and infrastructure teams, permitting and AHJ’s, installation teams and contractors, technical operations teams, and internal engineering and product teams.  You’ll work closely with the broader Engineering teams, Deployment and Construction team, Real Estate and Government Affairs,  Community Engagement and Legal teams teams to build strong relationships with key stakeholders and secure the necessary approvals to expand our network.

WHAT YOU’LL DO

• Work with customer teams and internal customer success teams to seamlessly integrate Zipline systems into both existing and newly designed infrastructure, including creating site layouts and related technical documents. Engage with partners’ internal teams to ensure alignment on expectations and timelines.
• Understand our internal and external customer’s business and needs and work with our internal engineering and business teams to refine and roadmap necessary product changes to ensure the successful deployment of the Ground Systems infrastructure. Maintain the high level customer specs and cut-sheets for the Zipline Systems. 
• Develop and lead pre-construction strategies to streamline entitlements and permits for Ziplines Ground System and Site Infrastructure projects. 
• Build and maintain strong relationships with Customer teams and technical staff, City Managers, staff, and City Council members and inspectors to facilitate smooth approvals and permit completion from Planning and Zoning commissions and AHJ’s. Collaborate closely with jurisdictions, land use counsel, Real estate team, and our Legal team to create pathways for deployments in evolving customer and regulatory landscapes.Source and foster relationships with external stakeholders, including local jurisdictions, utilities, and contractors.
• Understand and mitigate the preconstruction, construction, operational and sustaining  risks associated with each project. 
• Manage many parallel small construction projects, site infrastructure installments, construction contractors, and additional real estate development projects.
• Source and manage general contractors and subcontractors across various trades (construction, assembly, electrical) during bid, pre-construction, construction and site commissioning project phases. Evaluate all options and a lean budget, select best vendors to ensure reliable and quality services and products. Source and develop relationships with outside organizations (local jurisdiction, utilities, contractors, OEM and material suppliers etc).
• Develop and implement solutions to problems/projects/applications and associated systems from 0-1-100  across parallel projects and initiatives. 

WHAT YOU’LL BRING

• Bachelor’s degree in Engineering, Real Estate Development, Finance, Business Administration, Urban Planning, Architecture, Construction Management, or a related field 
• 4+  years of experience in a relevant field - technical sales of hardware products at scale, technical product management, real estate development or construction. Experience with technical sales and solution design of contractor installed equipment, and experience in the light commercial construction industry  is strongly preferred. 
• Proven ability to manage entitlements and permits for infrastructure projects in collaboration with internal and customers’ Real Estate and Construction teams. Familiarity with working alongside Authorities Having Jurisdiction (AHJs) to navigate permitting and inspection processes.
• Strong communication skills with the ability to align internal stakeholders on project requirements and provide leadership with regular updates on challenges, risks, and opportunities. Fluency in communicating ideas clearly, whether through quick sketches, sharp technical writing, or strategic presentations tailored to your audience.
• Experience working with External design teams (Architectural, Structural, Civil,Electrical MEPs) on commercial or industrial development  / construction projects. 
• Experience with CAD tools to develop site layouts, indicative construction designs and other technical drawings. 
• Based in the METRO region, with the flexibility to travel up to 20% domestically and internationally to support expansion projects.
• Must be eligible to work in the U.S.

What Else You Need To Know

Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws or our own sensibilities.

We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply! If you’d like to learn more about Zipline and our teams, feel free to check out our Instagram, one of our Reddit AMA’s, or our website!

Position Overview

Woolpert is hiring a Program Director for the Mission Critical team. The Program Director must be a licensed Architect or Engineer and is primarily responsible for sales and growth within the Mission Critical practice area through the establishment and improvement of client relationships. This position is also responsible for working across practice areas and service lines to develop business opportunities and ensure services are performed in a manner compatible with the goal of being an industry leader. This position reports to Mission Critical Market Director.  

We are unable to provide visa sponsorship for this position. Applicants must already possess work authorization in the country the job is located.     #LI-SN1

What You Will Do:

Business Development  

• Build and enhance existing client relationships to identify and initiate additional project opportunities within a client base for the service line, practice area and firm. 
• Identify and build new client relationships that match the client and project type focus and overall business strategy of the service line and practice area. 
• Promote SNHA (a Woolpert company) as an industry leader for specified market/practice and service(s) with new and existing clients. 
• Early project feasibility and strategic design input. 
• Collaborate with the MC Market Director and Building Sector Leader to define the EU market sales goals. 

Collaboration and support 

• Mentor and assist project managers in negotiating project schedules, fees, scope and contract terms.  
• Work with Project Managers to identify, address and resolve any project issues impacting client goals, objectives and/or client satisfaction.   
• Define and communicate client needs and expectations. 
• Ensure continuous stakeholder (client, client’s manager, etc.) communications addressing, resolving, and anticipating project issues. 

What You Will Bring:

Qualifications and Experience 

• BA/BS or MA/MS in Architecture, Mechanical Engineering, Civil Engineering, Electrical Engineering or similar field of study required. 
• 15 or more years of related experience in the Mission Critical Datacenter industry
• Current Professional Registration  
• Office 365: Word, Excel, Teams, SharePoint, Outlook, PowerPoint, basic AutoCad and Bluebeam (Essential). 
• Ability to travel within reason to meet the needs and demands of the practice area 

General Aptitude 

• Ability to make sound decisions/recommendations based on the evaluation and synthesis of information and data. 
• Demonstrates an enterprising, innovative, proactive management approach. 
• Possesses high levels of demonstrated leadership ability. 
• Ability to research and define multiple project scopes, schedules, and budgets. 
• Ability to establish and maintain rapport with clients, vendors, management and employees. 
• Possesses strong negotiation and problem-solving skills.  
• Possesses excellent facilitation and/or meeting skills.  
• Possesses excellent presentation and communication (oral and written) skills. 
• Strong understanding of project management and ability to facilitate technical discussions when needed.  
• Strong organizational skills to successfully manage multiple, competing priorities.
• Engaging with good interpersonal skills.

Benefits You Will Love

Certified as a Great Place to Work, Woolpert is one of the fastest-growing architecture, engineering, and geospatial companies in the world. With over 75 offices and countless projects around the globe, you’ll work on meaningful assignments that improve quality of life around the world. In addition to offering competitive pay, we provide employees with a robust set of unique benefits, including:

• Freedom to Work program: Set your own schedule and location (as appropriate).
• Principal program: Earn the opportunity to become an owner of the firm.
• Flexible paid time off/vacation: Take time off when it makes sense for you and your team.
• Career development: Explore a wide range of learning and growth opportunities within and across industries.
• Health, life, vision, and dental insurance: Cover all your medical bases.
• Paid sick time, retirement plan, fitness reimbursement, pet insurance, identity protection, technology stipend, employee assistance program, and more!

Job's mission

What you will be working on

What we are looking for

What sets you apart

Benefits:

• Health insurance (medical, dental, vision)
• 401(k)Retirement plan
• Paid time off (vacation, sick, flex, and holiday) & Parental Leave Benefit
• Life and disability insurance
• Employee assistance program (EAP), Family support, and parental consulting groups
• Healthcare Concierge
• Health Savings and Flexible Spending Accounts
• Lifestyle Spending Account / Fitness Reimbursement
• Fertility & Family Support Programs
• Wellness Program with medical premium discounts

As a Senior Software Engineer at ASM, you’ll sit at the intersection of cutting-edge software, complex hardware, and real-world customer impact. You’ll be a technical leader who solves the toughest software challenges in semiconductor manufacturing—driving system reliability, safety, and performance for our global customers. In this role, you won’t just fix issues—you’ll lead investigations, influence architecture, and deliver long-term, systemic improvements that power advanced semiconductor technology worldwide.

What You’ll Be Working On

• Lead deep technical investigations into software-related safety interlocks, validating corrective and preventive actions.
• Analyze and optimize multiple interacting subsystems, gaining end-to-end understanding of full platform workflows.
• Drive root cause and corrective action (RCCA) using packet captures, log correlation, and system-level analysis.
• Design and evaluate subsystem architectures, including multi-threading and scheduler interactions.
• Develop, test, deploy, maintain, and continuously improve software for advanced semiconductor manufacturing equipment.
• Troubleshoot complex software issues, including real-time control systems.
• Act as a technical escalation point—supporting field engineers and customers globally.
  Partner with QA and Support to reproduce field issues and strengthen regression coverage.
• Author and review system specifications, software designs, and test plans.
• Investigate internal and external technical inquiries, delivering clear analysis and actionable solutions.
• Evaluate and influence software engineering tools and system design decisions.
• Plan and coordinate rapid software fixes and deployments in high-impact environments.
• Present technical insights, progress, and outcomes in customer QBRs, including findings from complex DOE analyses.

What We’re Looking For

• Bachelor’s degree in Computer Science (or related field) with 7+ years of industry experience, or Master’s degree with 4+ years, or PhD with 3+ years of relevant experience
• Strong software development expertise in C++ and/or C#
• Solid understanding of multi-threaded applications
• Experience working with software documentation, specifications, and APIs
• Good knowledge of software memory architecture and debugging

What Sets You Apart

• Advanced degree (Master’s or PhD) and experience in software architecture and machine control systems, ideally within semiconductor equipment
• Hands-on experience with GUIs, device drivers, and interrupt-driven software
• Knowledge of data communications, networking, and EtherCAT
• Understanding of dynamic scheduling algorithms and deadlock avoidance
• Proficiency with development tools such as debuggers, application builders, and configuration management systems
• Ability to triage and diagnose mechanical, electrical, and software issues holistically
• Strong analytical skills, including designing and interpreting complex DOEs using multivariate methods or PCA

As a Principal Engineer, Global Product Management at ASM, you’ll have the opportunities to get involved in a wider scope of work compared to our larger competitors. While the workload is challenging, you are given the independence and autonomy to perform at your peak. This work requires being innovative, so you must have the ability to collaborate with others to deliver creative solutions, work well under pressure and pay great attention to small details.

This position is responsible for product management & technical marketing activities within the Product Management group. Every day is different, working with different customers and different products. This role is for someone who enjoys and is intellectually curious about the whole process and being part of it. You get to work external global customers that have many different needs and you will be part of the solution.  

Key Responsibilities:

• Product Life Cycle – Drive the product life cycle from concept to high volume manufacturing to obsolescence
• Roadmaps – Maintain product roadmap for a portfolio of products, periodically update roadmap through discussions with customers and internal experts, align product priorities and resources to roadmap
• Customer Engagement – Support Technical Meeting with customers, create and manage customer presentations, detailed market and competitive analysis
• MRS – Own the market requirement spec documents and ensure product development priorities align with MRS and customer needs
• Strategic Marketing – Prepare market strategies for executive R&D expenditure requests, develop roadmap and product strategy presentations for executives within ASM
• Financial – Work with finance department on NPV and IRR for products, maintain cost of ownership models
• Business Planning and Market Analysis – Attend company operation/planning meeting, create Business plan/Operation review materials, create business forecast based on market information, support budget planning, competitive analysis
• Drive teams internally to meet set products profit gross margins
• New Product Introductions – Detailed market analysis for inflections, development of business plans, internal executive alignment, positioning of products
• Support technical activities – Work with product development teams on specifications and data collection requirements, manage customer demo requests, prioritization of product development activities
• Supplier Engagement – Develop key capabilities for new products through collaboration with suppliers
• Product Promotion – Create promotional materials for conferences and launches, Sales and product support training, Introductions to Customer

Requirements:

• 10+ years of semiconductor / capital equipment industry experience, of which a significant portion has been in technical marketing and / or product management roles
• Masters or PhD in Material Science, Electrical/Chemical/Mechanical Engineering or equivalent
• Process, hardware, or device experience in semiconductors or capital equipment
• ALD or CVD experience is a plus
• High level of proficiency or deep understanding of capital equipment systems in semiconductor or similar industry
• Direct customer engagement or supplier management
• Ability to work with multiple internal disciplines on portfolio of products
• Understanding of product life cycle and technical marketing
• Ability to travel globally

We are looking for a Property Coordinator to assist in directing and coordinating activities of on-site management. This person will assist in effectively implementing procedures, cost controls and policies, maintaining good tenant and client/owner relations, as well as assisting the Property Management team in maintaining invoice records and contacting vendors/setting up accounts. 

Responsibilities: 

• Answer management phones and assist with Tenant needs 
• Respond to inquiries by providing routine information and or taking and delivering messages. 
• Receive and distribute and review all purchase orders, track purchase orders in Workspace, alert personnel of any problems or unresolved purchase orders, run monthly reports. 
• Coordinate special events such as holiday events/parties, welcome lunches, book fairs, blood drives, food drives etc. 
• Maintain inventory of office supplies and property staff directory. 
• Monitor outside vendors for compliance of contracts and certificate of insurance 
• Assist with preparing and administering service agreements 
• Establish and maintain record keeping and filing systems; classifies, sorts and files correspondence for tenant files and other documents 
• Responsible for accounts payable, accounts receivable and reporting. 
• Organize and code invoices in Workspace 
• Assist Chief Engineer with update of electrical analysis worksheet as utility invoices come in 
• Responsible for issuing Purchase Orders, tracking, and assigning the purchase orders to invoices as they are processed for payment 
• Applying tenant rents and open credits 
• Compiling and reviewing Tenant Billings and other misc. charges 
• Provide management team with aged delinquency reports and send late letters  

Desired Competency, Experience and Skills: 

• Must have a minimum high school education. Associates, B.A. or B.S. college degree preferred 
• Minimum of 2 years previous commercial property management experience 
• Experience with MRI, Workspace and Yardi software 
• Previous experience in real estate accounting and familiarity with monthly accounting cycle, including an understanding of A/P, A/R, commercial leases. 
• Possess professional demeanor and excellent interpersonal skills. 
• Have access to reliable transportation and maintain a valid driver's license. 
• Computer literate and proficient on MS Word, Excel, PowerPoint, 
• Excellent communication skills, both verbal and written 
• Ability to work independently 

This position is 100% in-office. The role requires working in office during standard business hours. Remote work or telecommuting is not an option for this position.

#ZIP

Your Impact

As a key member of our Validation team, you’ll help ensure every product and system meets the highest standards before it reaches our customers. You’ll develop Validation Test Procedures (VTPs), create comprehensive test plans, and collaborate with R&D and other teams to execute testing from start to finish. Your technical expertise will guide product evaluations, uncover issues, and drive resolutions alongside cross-functional partners. In this role, you’ll work closely with Engineering, Manufacturing, Quality Assurance, Project Management, and Supply Chain—making your communication skills just as important as your technical know-how.

What You’ll Do
Location: Onsite at our Deer Valley, Arizona location
Reports to: Manager, Hardware Validation & Reliability Engineering
Direct Reports: none

• Develop comprehensive test plans for our products
• Incorporate Statistical Analysis into Validation Testing
• Review & provide input into System & Product Requirements.
• Test Axon product capabilities & features to confirm requirements are met and ensure a smooth customer experience.
• Understanding troubleshooting firmware/software or hardware issue at a system level.
• Participate in occasional field testing of Axon products
• Work with a team of skilled technicians to ensure timely execution of the test plans
• Provide status updates and recommendations based on data results, and lead final reporting of validation efforts
• Leverage Engineering background to improve tests and processes
• Design and hone Validation Test Procedures with an emphasis on repeatability, standardization, and accuracy of testing
• Lead and oversee execution of all validation tests – including Firmware/Software, Mechanical, Environmental, and Electrical
• Document, track, and report test status and results to Engineering teams, following Good Documentation Practices (GDP).
• Support Failure Analysis (FA) and Root Cause Analysis (RCA) on issues found in test
• Work with external labs to coordinate required testing
• Implement and maintain 5S Standard for lab organization and management
• Develop customer usage models of all products

What You Bring

• MS or BS Degree in Engineering, Mechanical, Electrical, Electromechanical, Reliability or equivalent.
• Minimum of (5 years) of experience with validation or qualification testing
• Mechanical and Environmental test experience
• Test standards experience (MIL-STD, ISO, IEC, etc.)
• Test automation and basic code scripting, experience.
• Willingness to drive department improvement efforts
• Good attention to detail and documentation
• Experience in a regulated environment, a plus
• Experience with identifying, reproducing, documenting, and reporting bugs or issues
• Experience presenting test plan and requirements to stakeholders
• Understanding of Product Development Life Cycle
• Familiar with Project Management skill set, certified PMP a plus
• Familiar with Bug and Test Tracking Suites such as JIRA a plus
• Experience with manufacturing and assembly process
• Excellent analytical and problem-solving skills
• Excellent skills in MS Office products
• Ability to influence multi-functional organizations
• Certification in Six Sigma Black Belt or Green Belt ,a plus

Benefits that Benefit You

•Competitive salary and 401k with employer match
•Discretionary paid time off
•Paid parental leave for all
•Medical, Dental, Vision plans
•Fitness Programs
•Emotional & Mental Wellness support
•Learning & Development programs
•And yes, we have snacks in our offices

Benefits listed herein may vary depending on the nature of your employment and the location
where you work

As a Senior Engineer, Global Product Management at ASM, you’ll experience a dynamic and diverse scope of responsibilities that go beyond what’s typically offered at larger organizations. This role is ideal for someone who thrives in a fast-paced, intellectually stimulating environment and values autonomy, innovation, and cross-functional collaboration. 

You’ll be empowered to think creatively and strategically, working closely with global customers and internal teams to deliver cutting-edge solutions. Every day brings new challenges and opportunities to make a meaningful impact across the product lifecycle—from concept to commercialization. 

Key Responsibilities:  

• Product Lifecycle Management: Lead products from initial concept through high-volume manufacturing to end-of-life, ensuring alignment with market needs and business goals. 
• Roadmap Development: Own and maintain product roadmaps across a portfolio, updating regularly through customer insights and internal collaboration. 
• Product Definition: Own and maintain product structure, configuration, and options to support customer requests and efficient manufacturing execution.
• Customer Engagement: Drive technical discussions, create impactful presentations, and conduct detailed market and competitive analyses to support customer interactions.
• Market Requirements Specification (MRS): Develop and manage MRS documents to guide product development priorities and ensure alignment with customer expectations.
• Strategic Marketing: Craft go-to-market strategies, support executive R&D investment decisions, and develop high-level product strategy presentations.
• Financial Analysis: Collaborate with finance to assess product viability using NPV and IRR models; maintain cost-of-ownership frameworks.
• Business Planning & Market Analysis: Contribute to operational planning, business forecasting, and budget development through market intelligence and competitive analysis.
• New Product Introduction (NPI): Conduct market inflection analysis, develop business cases, align internal stakeholders, and position products for successful launch.
• Technical Collaboration: Partner with development teams to define specifications, manage demo requests, and prioritize product development efforts.
• Supplier Engagement: Build strategic supplier relationships to enable key capabilities for new products.
• Product Promotion: Create promotional content for conferences and product launches; deliver training and support to sales teams and customers. 

Requirements: 

• 3–10 years of experience in technical marketing within the semiconductor, capital equipment, or related industries 

• Advanced degree (Master’s or PhD) in Material Science, Electrical, Chemical, or Mechanical Engineering (or equivalent) 

• Strong background in semiconductor processes, hardware, or device technologies 

• Experience with ALD, CVD, Epi, or vacuum systems is a plus 

• Deep understanding of capital equipment systems and their applications 

• Proven track record of direct customer engagement and supplier management 

• Ability to collaborate across disciplines and manage a diverse product portfolio 

• Solid grasp of product lifecycle and technical marketing principles 

• Willingness and ability to travel globally 

The Key Account Technologists are the ASM product experts who support extensive customer and internal company contacts while driving the introduction of new products, product improvements, and product modifications.  As a Key Account Technologist (KAT) you'll help to expand product market share by helping win development tool of record (DTOR) selections and supporting competitive process application performance of the installed base. Further, the role requires someone who is not only skilled in R&D/Innovation, development, engineering, and design for manufacturability, but also someone who can be a key team member developing and delivering the ALD technology roadmap. This role requires interactions and communication between the product development team and the customer to ensure customer issues and concerns are being addressed with solutions and timelines.  A persistent approach to Product Life Cycle (PLC) will also be required to achieve strong engagement with the new product development team. This position requires Korean, Japanese or Mandarin language skills.

RESPONSIBILITIES:

• Responsible for process application NPI (New Product Introduction), product improvements, and product modifications for key product unit (KPU) installed base
• Develop and maintain relationships with key customers.
• Responsible for managing all the technical account aspects of customers
• Responsible for resolution of process and hardware-related escalations in the field
• Responsible for defining, maintaining, and implementing BKM process for all process applications – including standards, specs, and recipes, installed base performance
• Support highly engaged working relationship between KAT department, ASM’s customer account teams and customers’ engineers to ensure all customer needs and requirements are understood and addressed
• Drive close cooperation with multiple internal stakeholders, especially with Process Development teams, Global Sales, Service and Spares, Account Teams, Engineering and Global Product Management (GPM)

Key SELECTION CRITERIA:

• Excellent Korean, Japanese, or Mandarin language skills, both written and spoken
• 5+ years (or 3+ years with Ph.D.) experience in the semiconductor wafer processing or capital equipment industry
• Master’s degree (or above) in material science, physics, chemical, mechanical or electrical engineering, or related field
• Related work experience can include process engineering, technical marketing, or product support
• Proven ability to drive continuous improvement across operations
• Able to build long term relationships of trust with customers
• Strong written and verbal communication skills including excellent presentation and influencing skills
• Semiconductor experience should be primarily focused on atomic layer deposition (ALD) or chemical vapor deposition (CVD).
• Experience in work function, metallization, silicides, and electrodes in logic or memory is preferred

PERSONAL / professional ATTRIBUTES:

• Self-starter with high energy and strong work ethic
• Highly motivated and results driven
• A proactive change agent
• A strategic thinker with the ability to implement and drive tactics, strong at execution
• A problem solver – communication comes naturally when solving problems and addressing roadblocks.
• Able to independently make and execute decisions in a timely manner, leading people accordingly
• Ability to lead and influence others across cultures
• Highly collaborative and able to manage conflict

Travel:

• Flexibility to travel up to 30% of the time (internationally)

As a Senior Process Engineer at ASM, you will work with semiconductor processing and analytical equipment to research, develop and optimize processes focused on oxidation, annealing, curing, Atomic Layer Deposition (ALD) for logic, memory, analog, power, and MEMS applications. You will design and conduct complex experiments, measurements and perform the interpretation of complex experimental output. While you deliver creative and inventive solutions, technical publications, and generation of Intellectual Property (IP) are an essential function of this position. This position requires Korean, Japanese or Mandarin speaking skills.

Key Responsibilities 

• Creative problem solver with experience in developing new films for emerging applications and experience in chemistry/materials characterization.
• Works with semiconductor processing equipment to research, develop and optimize unit processes focused on the deposition of metal and dielectric films via ALD.
• Bringing innovative ideas, staying abreast of state-of-the-art processing applications in the semiconductor industry to be effective.
• Process consulting and accountability including technical papers on advanced process applications and Intellectual Property creation.
• Participates in and drives technical problem-solving sessions using the related scientific method and industry tools, such as Ishikawa diagrams.
• Designs and conducts experiments, in addition to measuring and interpreting experimental output, aimed at fulfilling stated objectives using Design of Experiments (DOE) and Response Surface Methodology (RSM).
• Troubleshoots equipment problems and is personally and actively engaged in problem via “hands-on” modalities.
• Works with customers and central marketing to understand and define requirements to successfully execute and document customer demonstrations.
• Develops methods and techniques for integrating metal and/or oxide films into existing and future device technologies.
• Ensures successful product transfer to customer base by performing demonstrations, training field service personnel, traveling to support remote sites (up to 10% travel required), and drafting documentation regarding process development, tool operation and maintenance.
• Produces technical papers on process, equipment, and device integration improvement strategies and presents to professional audience.
• You may be assigned supervisory duties over supporting process engineering technicians and aides. These supervisory duties could include direct input into employees’ performance evaluations, discipline, and discharge.

Qualifications

• Master’s or PhD degree in Chemical Engineering, Materials Science, Chemistry, or Physics.
• Experience with Atomic Layer Deposition (ALD)
• Knowledge of electrical characterization techniques for CMOS devices.
• Application of dielectric and/or metal films for logic and memory structures.
• Training in CFD (computational fluid dynamics), either theoretical or practical is preferred.
• Knowledge of electrical characterization techniques for CMOS devices is preferred.

  Skills

• Ability to independently manage complex process development projects, including personnel, project schedules, experimental thrusts, hardware procurement and budgetary oversight.
• Ability to be a process consultant to internal and external customers.
• An authority on interplay between hardware design (e.g., chemical reactor design) and operation and process outputs
• Understanding of requirements for integration of metals as work function materials and barrier layers in FEOL and BEOL process flows
• Demonstrated ability to develop and completely characterize deposition processes using first principles and experimental design techniques (e.g., DOE, RSM).
• Experience with the theory, practice, and interpretation of materials characterization techniques such as XPS, SIMS, RBS, AFM, XRD, HRTEM, FESEM, Auger, Raman and ellipsometry.
• Excellent verbal and written communication skills, with ability to clearly communicate advanced technical constructs in direct and concise manner.

The Key Account Technologists are the ASM product experts who support extensive customer and internal company contacts while driving the introduction of new products, product improvements, and product modifications.  As a Key Account Technologist (KAT) you'll help to expand product market share by helping win development tool of record (DTOR) selections and supporting competitive process application performance of the installed base. Further, the role requires someone who is not only skilled in R&D/Innovation, development, engineering, and design for manufacturability, but also someone who can be a key team member developing and delivering the PECVD technology roadmap. This role requires interactions and communication between the product development team and the customer to ensure customer issues and concerns are being addressed with solutions and timelines.  A persistent approach to Product Life Cycle (PLC) will also be required to achieve strong engagement with the new product development team.

Responsibilities:

• Responsible for process application NPI (New Product Introduction), product improvements, and product modifications for key product unit (KPU) installed base
• Develop and maintain relationships with key customers.
• Responsible for managing all the technical account aspects of customers
• Responsible for resolution of New process escalations in the field during NPI stage
• Responsible for defining and implementing BKM process for all process applications – including standards, specs, and recipes, installed base performance
• Support highly engaged working relationship between KAT department, ASM’s customer account teams and customers’ engineers to ensure all customer needs and requirements are understood and addressed
• Drive close cooperation with multiple internal stakeholders, especially with Process Development teams, Business Development Team, Account Teams, Engineering and Global Product Management (GPM)

Qualifications:

• 5+ years (or 3+ years with Ph.D.) experience in the semiconductor wafer processing or capital equipment industry
• Master’s degree (or above) in material science, physics, chemical, mechanical or electrical engineering, or related field
• Related work experience can include process engineering, technical marketing, or product support
• Proven ability to drive continuous improvement across operations
• Able to build long term relationships of trust with customers
• Strong written and verbal communication skills including excellent presentation and influencing skills
• Semiconductor experience should be primarily focused on PECVD.
• Experience in work function, metallization, silicides, and electrodes in logic or memory is preferred

Attributes:

• Self-starter with high energy and strong work ethic
• Highly motivated and results driven
• A proactive change agent
• A strategic thinker with the ability to implement and drive tactics, strong at execution
• A problem solver – communication comes naturally when solving problems and addressing roadblocks.
• Able to independently make and execute decisions in a timely manner, leading people accordingly
• Ability to lead and influence others across cultures
• Highly collaborative and able to manage conflict

Travel:

• Flexibility to travel up to 30% of the time (internationally)

Be the Expert Others Rely On—Advance EPI Technology at ASM

Global Product Support Engineer

At ASM, our technology enables the world’s most advanced semiconductor manufacturing—and when the challenges are toughest, our experts step in. We’re seeking a Senior Global Product Support Engineer who thrives on solving complex problems, supporting cutting‑edge tools, and making a real difference for customers and field teams worldwide.

In this role, you’ll serve as the go‑to technical authority, supporting advanced EPI systems when issues demand deep expertise beyond first‑line support. Your work will directly impact tool performance, customer confidence, and ASM’s reputation for technical excellence.

What You’ll Do

As a Global Product Support Engineer, you’ll operate at the highest technical level, combining hands‑on problem solving with global collaboration:

• Provide advanced technical support for complex electro‑mechanical equipment and sophisticated software systems
• Diagnose, troubleshoot, repair, and debug issues escalated by field engineers and product support teams
• Act as the escalation point when standard troubleshooting paths are exhausted, delivering clear solutions under pressure
• Partner with engineering teams by reporting design, reliability, and maintenance insights that drive continuous improvement
• Support customer installations and deliver technical training when deeper expertise is required
• Engage directly with customers to resolve highly technical issues and ensure optimal system performance
• Travel globally (up to 50%) to support field operations, customer sites, and critical escalations

What We’re Looking For

You bring strong semiconductor experience, technical depth, and the confidence to lead in high‑stakes situations:

• Proven experience diagnosing and resolving complex technical issues
• Minimum 3 years of experience in semiconductor manufacturing environments
• Bachelor’s degree in Engineering (Mechanical or Electrical Engineering preferred)
• Strong understanding of electro‑mechanical systems and software‑driven equipment
• Excellent analytical and problem‑solving skills
• Ability to clearly communicate complex technical concepts to both technical and non‑technical audiences
• Strong presentation skills and comfort leading technical discussions
• Willingness and ability to travel locally and internationally up to 50%
• Customer‑focused mindset with the ability to remain effective in challenging, time‑critical situations

As a Senior Principal Engineer, Global Product Management, you’ll drive ASM’s product strategy and market leadership by shaping the product roadmap, overseeing the full product lifecycle, and engaging with customers to deliver solutions that push the boundaries of innovation. This role offers the unique opportunity to work across disciplines, collaborate with internal and external stakeholders, and influence the future of semiconductor technology.

What you will be working on

• Product Strategy & Roadmap – Identify key market opportunities and develop product roadmaps to enhance ASM’s market position.
• Product Lifecycle Management – Drive products from concept to high-volume manufacturing and eventual obsolescence.
• Market Requirements Specification (MRS) & Business Planning – Define market requirements, conduct competitive analysis, and develop business plans.
• Customer & Supplier Engagement – Lead technical discussions with customers, create strategic presentations, and coordinate with suppliers to optimize cost, specifications, and timelines.
• Financial & Market Analysis – Work with finance to assess product profitability, manage cost models, and develop pricing strategies.
• New Product Introductions – Support product positioning, go-to-market strategies, and executive alignment for new product launches.
• Technical & Marketing Support – Develop key marketing materials, support sales training, and lead product promotions at conferences.

What we are looking for

• PhD in Materials Science, Electrical Engineering, Chemical Engineering, or a related technical field.
• 5+ years of experience in semiconductor process engineering or semiconductor equipment technology.
• 3+ years of experience in customer support, product management, or product marketing roles.
• Strong understanding of semiconductor capital equipment, supply chain, and product lifecycle management.
• Ability to work cross-functionally and influence internal and external stakeholders.
• Experience engaging directly with customers, presenting technical marketing materials, and defining product value propositions.

What sets you apart

• Experience in competitive analysis, product segmentation, and pricing strategies.
• Strong proficiency in Excel modeling, project management, and analytical skills.
• Demonstrated ability to lead and develop teams while driving strategic initiatives.

We are seeking R&D-oriented Engineers to join our team in the development and improvement of semiconductor manufacturing equipment, specifically focusing on plasma-based chambers.

Key Responsibilities:

· Conduct research and development of components and mechanisms, including concept creation, feasibility studies, and practical evaluation/testing.

· Perform hardware characterization, define process window, and analyze process-hardware interaction.

· Design experiments, collect data, analyze results, and compile reports on various process development experiments

· Develop new equipment and functionalities, as well as improve existing equipment, from specification to detailed design.

· Ability to function in multi-disciplined fields (Process development, Hardware development and Metrology)

Required Skills:

· PhD in Physics, Engineering (Chemical, Electrical, Mechanical, or related fields), Material Science or Master degree with at least 3 years professional experience.

· In-depth knowledge of low-pressure RF plasma systems, including ICP, CCP, and microwave plasma sources

· Strong understanding of plasma-surface interactions, and precursor/plasma chemistry. Familiarity with PECVD, PEALD, RIE process mechanisms.

· Excellent communication skills for technical documentation, cross-functional collaboration, and customer-facing discussions

Preferred Skills:

· Familiarity with epitaxial silicon growth and characterization

· Familiarity with EM and multi-physics simulation tools (e.g., COMSOL, High Frequency Simulation software such as Ansys HFSS, CST studio )

· Familiarity with plasma diagnostics (e.g., Langmuir probes, OES, VI probes)

· Familiarity with common thin-film & chemical characterization & metrology techniques including: SEM, TEM, XRD, Ellipsometry, XPS / AES as well as ICP-MS, particle analysis, sheet resistance probe analysis etc

As a Process Productivity Engineer at ASM, you will work with our customers as a system level expert focused on product support for new product development. This role will require 25-50% domestic and international travel (depending on product cycle).

Responsibilities: 

• Drives and owns top customer productivity issues (e.g., defect reduction, tool matching, tool availability, etc.) for products in the field across the product life cycle, from new product introduction through high volume manufacturing.  
• Interaction with Hardware, Electrical, Controls, Product Support, Process, and Software engineering teams to become the system level expert on new products transferred to the field. Become an expert on the interaction of the products with the customer processes and resulting tool productivity.
• Provides guidance to engineering during the design phase of new products on key customer requirements and needs, including productivity specifications (e.g., defects, tool matching, throughput, etc.) and process best practices.
• Designs and conducts experiments, in addition to measuring and interpreting experimental output, aimed at fulfilling stated objectives using Design of Experiments (DOE) and Response Surface Methodology (RSM).
• Troubleshoots equipment problems and is personally and actively engaged in problem via “hands-on” modalities.
• Owns marathon qualification of new processes and products in the development lab, including data collection, analysis, and improvement plans. Works closely with Process, Product Support, and Hardware engineering teams providing real time feedback of marathon issues and recommended solutions.
• Ensure processes follow best known practices throughout the product life cycle, from before the first eval shipment through the HVM ramp. Share and proliferate new solutions across internal teams, including Process, Product Support, and Field Support engineering teams.

Education and Requirements:

• Master’s or PhD Degree in Chemical Engineering, Materials Science, Chemistry, Physics, Mechanical Engineering, Electrical Engineering, or related degree.
• Hands-on and/or course work experience with hardware.
• Strong technical troubleshooting and root cause analysis skills.
• Demonstrated ability to characterize processes and/or hardware using first principles and experimental design techniques (e.g., DOE, RSM).
• High motivation, enthusiasm and curiosity to learn.
• Interested in working with new products, testing them and becoming a system level expert.
• Excellent verbal and written communication skills, with ability to clearly communicate advanced technical constructs in direct and concise manner.
• Statistical analysis and script writing in Python, Matlab, or similar is a plus.
• Ability to travel (domestic and international) 25-50%

As a Senior Process Engineer at ASM, you will work with semiconductor processing and analytical equipment to research, develop and optimize processes focused on oxidation, annealing, curing, Atomic Layer Deposition (ALD, PEALD), Epitaxy or PECVD for logic, memory, analog, power, and MEMS applications. You will design and conduct complex experiments, measurements and perform the interpretation of complex experimental output. While you deliver creative and inventive solutions, technical publications, and generation of Intellectual Property (IP) are an essential function of this position. This job posting is for applicants with 2+ years of industry work experience. 

Key Responsibilities 

• Creative problem solver with experience in developing new films for emerging applications and experience in chemistry/materials characterization.
• Works with semiconductor processing equipment to research, develop and optimize unit processes focused on the deposition of metal and dielectric films via ALD, PEALD, Epitaxy, and/or PECVD.
• Bringing innovative ideas, staying abreast of state-of-the-art processing applications in the semiconductor industry to be effective.
• Process consulting and accountability including technical papers on advanced process applications and Intellectual Property creation.
• Participates in and drives technical problem-solving sessions using the related scientific method and industry tools, such as Ishikawa diagrams.
• Designs and conducts experiments, in addition to measuring and interpreting experimental output, aimed at fulfilling stated objectives using Design of Experiments (DOE) and Response Surface Methodology (RSM).
• Troubleshoots equipment problems and is personally and actively engaged in problem via “hands-on” modalities.
• Works with customers and central marketing to understand and define requirements to successfully execute and document customer demonstrations.
• Develops methods and techniques for integrating metal and/or oxide films into existing and future device technologies.
• Ensures successful product transfer to customer base by performing demonstrations, training field service personnel, traveling to support remote sites (up to 10% travel required), and drafting documentation regarding process development, tool operation and maintenance.
• Produces technical papers on process, equipment, and device integration improvement strategies and presents to professional audience.
• You may be assigned supervisory duties over supporting process engineering technicians and aides. These supervisory duties could include direct input into employees’ performance evaluations, discipline, and discharge.

Qualifications

• Master’s or PhD degree in Chemical Engineering, Materials Science, Electrical Engineering, or Physics.
• 2+ years of work experience with:
  • Cure, oxidation, ALD, CVD, Epitaxy, PECVD and/or other thin film deposition.
  • Materials characterization techniques such as XPS, SIMS, RBS, AFM, XRR, XRD, TEM, SEM and ellipsometry.
• Knowledge of electrical characterization techniques for CMOS devices.
• Application of dielectric and/or metal films for logic and memory structures.
• Training in CFD (computational fluid dynamics), either theoretical or practical is preferred.
• Knowledge of electrical characterization techniques for CMOS devices is preferred.

  Skills

• Ability to independently manage complex process development projects, including personnel, project schedules, experimental thrusts, hardware procurement and budgetary oversight.
• Ability to be a process consultant to internal and external customers.
• An authority on interplay between hardware design (e.g., chemical reactor design) and operation and process outputs
• Understanding of requirements for integration of metals as work function materials and barrier layers in FEOL and BEOL process flows
• Demonstrated ability to develop and completely characterize deposition processes using first principles and experimental design techniques (e.g., DOE, RSM).
• Experience with the theory, practice, and interpretation of materials characterization techniques such as XPS, SIMS, RBS, AFM, XRD, HRTEM, FESEM, Auger, Raman and ellipsometry.
• Excellent verbal and written communication skills, with ability to clearly communicate advanced technical constructs in direct and concise manner.

As a Principal Process Engineer at ASM, you will work with semiconductor processing and analytical equipment to research, develop and optimize processes focused on oxidation, annealing, curing, Atomic Layer Deposition (ALD, PEALD), Epitaxy or PECVD for logic, memory, analog, power, and MEMS applications. You will utilize your extensive technical domain expertise to deliver innovative solutions to our product teams. You will design and conduct complex experiments, measurements and perform the interpretation of complex experimental output. While you deliver creative and inventive solutions, technical publications, and generation of Intellectual Property (IP) are an essential function of this position.

Key Responsibilities 

• Creative problem solver with experience in developing new films for emerging applications and experience in chemistry/materials characterization.
• Works with semiconductor processing equipment to research, develop and optimize unit processes focused on the deposition of metal and dielectric films via ALD, PEALD, Epitaxy, and/or PECVD.
• Bringing innovative ideas, staying abreast of state-of-the-art processing applications in the semiconductor industry to be effective.
• Process consulting and accountability including technical papers on advanced process applications and Intellectual Property creation.
• Provides mentorship to other Process Engineers within the team.
• Participates in and drives technical problem-solving sessions using the related scientific method and industry tools, such as Ishikawa diagrams.
• Designs and conducts experiments, in addition to measuring and interpreting experimental output, aimed at fulfilling stated objectives using Design of Experiments (DOE) and Response Surface Methodology (RSM).
• Troubleshoots equipment problems and is personally and actively engaged in problem via “hands-on” modalities.
• Works with customers and central marketing to understand and define requirements to successfully execute and document customer demonstrations.
• Develops methods and techniques for integrating metal and/or oxide films into existing and future device technologies.
• Ensures successful product transfer to customer base by performing demonstrations, training field service personnel, traveling to support remote sites (up to 10% travel required), and drafting documentation regarding process development, tool operation and maintenance.
• Produces technical papers on process, equipment, and device integration improvement strategies and presents to professional audience.
• You may be assigned supervisory duties over supporting process engineering technicians and aides. These supervisory duties could include direct input into employees’ performance evaluations, discipline, and discharge.

Qualifications

• Master’s or PhD degree in Chemical Engineering, Materials Science, Electrical Engineering, or Physics
• 7+ years of combined education, research, and work experience with:
  • Cure, oxidation, ALD, CVD, Epitaxy, PECVD and/or other thin film deposition.
  • Materials characterization techniques such as XPS, SIMS, RBS, AFM, XRR, XRD, TEM, SEM and ellipsometry.
• Knowledge of electrical characterization techniques for CMOS devices.
• Application of dielectric and/or metal films for logic and memory structures.
• Training in CFD (computational fluid dynamics), either theoretical or practical is preferred.
• Knowledge of electrical characterization techniques for CMOS devices is preferred.

Skills

• Ability to independently manage complex process development projects, including personnel, project schedules, experimental thrusts, hardware procurement and budgetary oversight.
• Ability to be a process consultant to internal and external customers.
• An authority on interplay between hardware design (e.g., chemical reactor design) and operation and process outputs
• Understanding of requirements for integration of metals as work function materials and barrier layers in FEOL and BEOL process flows
• Demonstrated ability to develop and completely characterize deposition processes using first principles and experimental design techniques (e.g., DOE, RSM).
• Experience with the theory, practice, and interpretation of materials characterization techniques such as XPS, SIMS, RBS, AFM, XRD, HRTEM, FESEM, Auger, Raman and ellipsometry.
• Excellent verbal and written communication skills, with ability to clearly communicate advanced technical constructs in direct and concise manner.

We are seeking a highly motivated System Engineer to join our Sensor Technology Group, a dynamic team driving innovation in advanced sensor solutions for semiconductor manufacturing equipment. This role offers a unique opportunity to work at the intersection of mechanical, electrical, chemical, and materials engineering, contributing to the development of next-generation sensor systems that enable precision, reliability, and performance in semiconductor fabrication.

Responsibilities:

• Lead and support the design, integration, and validation of sensor systems within semiconductor equipment platforms.
• Collaborate cross-functionally with hardware, software, and process engineering teams to define system requirements and architecture.
• Develop and execute test plans to evaluate sensor performance under various operating conditions.
• Analyze data to identify trends, troubleshoot issues, and optimize sensor functionality.
• Drive continuous improvement in sensor system reliability, manufacturability, and cost-effectiveness.
• Support technology transfer from R&D to production, including documentation and training.
• Stay current with emerging sensor technologies and industry trends.

Requirements:

• Bachelor’s or Master’s degree in mechanical engineering, Electrical Engineering, Chemical Engineering, Materials Science, or a related field.
• 3+ years of experience in system engineering, preferably in semiconductor equipment or high-tech industries.
• Experience with system integration, data acquisition, and signal processing.
• Experience in tools such as JMP, Python, or similar for data analysis.
• Excellent problem-solving skills and ability to work in a fast-paced, collaborative environment.
• Strong communication skills and ability to present technical concepts to diverse audiences.

Preferred Qualifications:

• Relevant work experience in semiconductor equipment or a similar industry.
• knowledge of semi-conductor vacuum system, automatic wafer transfer (mechatronic: robotics, servo control, sensor and actuators) and integration into complex wafer processing system.
• Understanding of sensor technologies (e.g., thermal, optical, chemical, pressure, flow).
• Semiconductor related metrology knowledge (instrumentation to qualify & measure thickness, particles, electrical resistivity, etc.)
• Experience transitioning third party tools and service to in-house is particularly interesting

As a Principal Engineer, Surface Technology (Surface Modification) reporting to Surface Technology Group, you will work with other ASM global technology team members including materials scientists, equipment engineers, process, quality and field service engineers as well as external customers to solve time critical or strategic technology challenges and develop unique advanced solutions in collaborative partnerships.

The position requires the individual to:

• Drive improvements in Thermal & Plasma Enhanced ALD system component longevity, emissivity, stability, refurbishment / service strategy and process performance to enable reliable and efficient deposition of a range of next generation advanced thin film materials exhibiting various electrical & physical properties.
• Work independently to develop new approaches to modify surfaces of internal ALD chamber components to improve performance, lifetime, defectivity and CoO for customers processing various materials for use as functional/active layers in semiconductor device stacks.
• Connect process conditions, physical characterization, and electrical response towards understanding of mechanisms.
• Specify, procure and develop state-of-the-art advanced process equipment.
• Formulate new surface texturing and dry coating strip methods.
• Leverage advanced knowledge of media blast, multi-axis automated control systems, e-beam and pulsed laser process technologies.
• Direct / manage projects & relationships with critical 3^rd party suppliers & supporting institutions.
• Have a passion for surface engineering processes, be inquisitive to drive projects & root-cause failure investigations whilst being systematic & entrepreneurial in mind-set.
• Demonstrate experience within a high-volume semiconductor clean room environment.
• Be based within the ASM Phoenix AZ campus but open to travel (<10%) to customer and supplier global sites when necessary.

Preferred Qualifications:

• Bachelor’s degree or advanced degree studying Materials Science, Physics, Chemical Engineering, Chemistry, Electrical Engineering or similar technical / scientific field.
• Minimum 1-5 years of industrial experience preferably using automated blast or industrial laser or e-beam systems.
• Expertise in high volume semiconductor cleaning  environments highly advantageous.
• Solid understanding of Design-of-Experiments execution and statistical data analysis.
• Familiarity with common surface characterization & metrology techniques including: Optical microscopy, SEM, TEM, XPS / AES, profilometry, CMM as well as ICP-MS, particle analysis etc.
• Ability to engage with customers both on a highly technical basis and personally.
• Self-motivated, results-oriented with high commitment to work quality in a fast-paced environment.
• Proven ability to solve complex analytical problems and provide robust solutions based on solid technical background.

In this role as a Senior Engineer, Surface Technology (Parts Coating) reporting within the Surface Technology Group, you will work with other ASM global technology team members including materials scientists, equipment engineers, process, quality and field service engineers as well as external customers to solve time critical or strategic technology challenges and develop unique advanced solutions in collaborative partnerships.

The position requires the individual to:

• Drive improvements in Thermal & Plasma Enhanced ALD system parts longevity, stability, refurbishment / service strategy and process performance to enable reliable and efficient deposition of a range of next generation advanced thin film materials exhibiting various electrical & physical properties.
• Work independently to develop new approaches to coat, protect and refurbish internal vacuum chamber components to improve performance, lifetime, defectivity and CoO for customers processing various materials for use as functional/active layers in semiconductor device stacks.
• Connect process conditions, physical characterization, and electrical response towards understanding of mechanisms.
• Specify, procure and develop state-of-the-art advanced process equipment.
• Formulate new protective and release coating formulations.
• Leverage advanced knowledge of various atmospheric & vacuum based etch & surface treatment approaches and utilize expertise in a range of surface / bulk characterization methods.
• Direct / manage projects & relationships with critical 3^rd party suppliers & supporting institutions.
• Have a passion for surface engineering processes, be inquisitive to drive projects & root-cause failure investigations whilst being systematic & entrepreneurial in mind-set.
• Demonstrate experience within a high volume semiconductor clean room environment.
• Be based within the ASM Phoenix AZ campus but open to occasional travel to additional global ASM, customer and supplier global sites when necessary.

Preferred Qualifications:

• Bachelors science degree ideally involving theory & practice of an appropriate thin film deposition technique whilst studying Materials Science, Physics, Chemical Engineering, Chemistry, Electrical Engineering or similar technical field.
• Minimum 1-5 years of experience in ALD (atomic layer deposition), PECVD (plasma enhanced chemical vapor deposition) or PVD (physical vapor deposition) technology,
• Expertise in coating equipment design and electro-mechanical development approaches highly advantageous.
• Experience using ASM EmerALD systems a plus.
• Solid understanding of Design-of-Experiments execution and statistical data analysis.
• Familiarity with common thin-film & chemical characterization & metrology techniques including: Optical microscopy, SEM, TEM, XRD, Ellipsometry, XPS / AES as well as ICP-MS, particle analysis, sheet resistance probe analysis etc.

• Ability to engage with customers both on a highly technical basis and personally.
• Ability to self-manage projects from conception to high volume production necessary
• Self-motivated, results-oriented with high commitment to work quality in a fast-paced environment.
• Proven ability to solve complex analytical problems and provide robust solutions based on solid technical background.

Job’s mission

What you will be working on

• Design and develop electromechanical systems integrating robotics with advanced control architectures.
• Implement visual-aided closed-loop control systems with real-time motion adjustment.
• Apply image processing algorithms using OpenCV, MATLAB, or similar libraries to guide robotic motion.
• Develop and tune servo control systems for precision and stability.
• Program and deploy control software for robotic platforms and embedded controllers (C/C++, Python, ROS).
• Develop, debug, and maintain PLC programs using Siemens, Allen-Bradley, or Beckhoff platforms.
• Collaborate with mechanical, electrical, and software teams for seamless integration.
• Participate in prototyping, testing, validation, and field deployment.
• Document system architecture, design decisions, and performance metrics.
• Provide technical support for troubleshooting and maintenance.

What we are looking for

• BS in Robotics, Mechatronics, Electrical Engineering, or related field with 12+ years of experience; MS with 8+ years; PhD with 4+ years.
• Proven expertise in control systems, including PID tuning, kinematics, and dynamic modeling.
• Hands-on experience with machine vision and image processing.
• Strong background in servo drive configuration and motor control.
• Proficiency in control software development for embedded and real-time systems.
• Experience with PLC programming and industrial communication protocols.
• Excellent problem-solving skills and ability to work independently or in teams.
• Strong communication skills for documentation and collaboration.

What sets you apart

• Familiarity with robotic frameworks such as ROS and tools like MATLAB/Simulink, LabVIEW, or TwinCAT.
• Knowledge of low-level communication interfaces (CAN bus, I2C, SPI, UART).
• Basic mechanical design principles and CAD tools.
• Experience with sensor integration (cameras, LIDAR, proximity sensors) and real-time data processing.
• Skills in actuator control and trajectory planning.
• Knowledge of semiconductor manufacturing processes and automation requirements.
• Experience with industrial robots or willingness to learn these applications.

Your Impact

As a Manufacturing Quality Engineer II, you will be a key member of the Global Quality team. You will support the full product lifecycle, ensuring high-quality manufacturing processes and products that meet or exceed Axon’s standards and customer expectations.

What You’ll Do 

• Participate in the Axon Product Lifecycle (APL) process to ensure compliance with quality deliverables including issue resolution (CAPA), validation plans, CTQ identification, FAIR/PPAP documentation, and quality monitoring implementation.
• Lead nonconforming material review (NCMR/MRB) and manage material dispositions with cross-functional teams.
• Drive and manage 8D investigations and root cause analysis (RCA); implement effective corrective and preventive actions.
• Develop and maintain FAIRs, PPAP documentation, and AQL sampling plans for incoming, in-process, and final inspections.
• Provide engineering support to Receiving Inspection including Gage R&R studies, MSA, and inspection procedure development.
• Support new product introduction (NPI) through validation, process control, and risk mitigation strategies (e.g., PFMEA).
• Perform risk assessment and drive risk mitigation and execution for line stoppages, shipment stoppages, product launch blockers and other highly escalated situations.
• Implement and monitor Statistical Process Control (SPC) systems to drive continuous improvement.
• Use DMAIC principles and statistical analysis (e.g., Minitab, JMP) to identify process improvement opportunities.
• Interface with manufacturing, engineering, and design teams to drive process consistency and yield improvements.
• Participate in internal and supplier audits; ensure compliance with industry standards (e.g., IPC-A-610).
• Manage quality-related documentation including procedures, inspection plans, and training materials.
• Partner with supply chain and procurement to ensure supplier quality and performance metrics are met.
• Support Lean Manufacturing initiatives and contribute to Kaizen events and value stream mapping.
• Communicate effectively across departments to ensure quality alignment and customer satisfaction.
• Demonstrate strong ownership and ability to work autonomously in a fast-paced, ambiguous environment.

What You Bring

• Bachelor’s degree in Mechanical, Electrical, Industrial, Quality Engineering, or related discipline.
• 3+ years of experience in a production/manufacturing quality engineering role.
• Experience with CAPA, RCA/8D, PPAP, FAIR, PFMEA, and validation activities.
• Certified Six Sigma Green Belt or Black Belt (CSSGB/CSSBB) or equivalent experience in process improvement.
• Strong knowledge of IPC-A-610 and relevant industry standards.
• Proficiency in MS Office tools and statistical analysis software such as Minitab, JMP, or similar.
• Strong understanding of engineering drawings, specifications, GD&T, and inspection techniques.
• Experience with Quality Management Systems (QMS), ISO 9001 or AS9100 is a plus.
• Excellent communication, problem-solving, and technical report writing skills.
• Strong time management, multitasking, and organizational skills.
• Proactive, results-oriented, and able to thrive in a dynamic environment.
• Internal or external audit experience preferred.

Benefits that Benefit You

• Competitive salary and 401(k) with employer match

• Discretionary paid time off

• Paid parental leave for all

• Medical, Dental, Vision insurance

• Fitness programs and wellness support

• Learning & development opportunities

• Office snacks and collaborative spaces

  Benefits listed may vary based on employment type and location.

Your Impact

As a Manufacturing Test Engineer, you’ll play a critical role in ensuring the quality and performance of the devices that help save lives and keep communities safer. You’ll develop and support advanced automated test systems used in the production of our cutting-edge body-worn cameras, smart weapons, and other connected devices. Your work will directly impact our ability to scale with quality, reliability, and speed.

What You’ll Do

Location: Onsite at our Pinnacle location in Phoenix, AZ
Reports to: Manufacturing Engineering Manager, Video
Direct Reports: N/A

• Design, develop, and maintain robust automated test systems for Axon’s manufacturing lines, leveraging LabVIEW and TestStand
• Collaborate with cross-functional teams—hardware, firmware, software, and manufacturing—to define test strategies and implement scalable solutions
• Drive continuous improvement in test coverage, reliability, and efficiency to meet Axon’s quality and throughput goals
• Support New Product Introduction (NPI) by developing and deploying test systems that scale from prototype to mass production
• Troubleshoot complex test issues and perform root cause analysis on hardware and system-level failures
• Generate detailed test documentation and support the training of technicians and operators
• Create Statements of Work (SOW) and other technical specifications for third party integrators.
• Perform design reviews, software audits and acceptance testing with third party integrators.
• Collaborate on mechanical fixture design.
• Analyze test data, generate reports, and provide feedback to engineering and quality teams.
• Ensure compliance with safety and quality standards in a fast-paced, high-growth environment

What You Bring

• Bachelor’s degree in Electrical Engineering, Computer Engineering, or a related technical field
• 8+ years of progressive experience in test engineering, with a proven track record in developing and leading automated test solutions for electronic hardware, preferably in manufacturing environments
• 5+ years of advanced, hands-on experience with LabVIEW for complex test and measurement systems, including architecture design, reusable code modules, real-time data acquisition, instrument drivers, user interfaces, and integration with external hardware.
• 2+ years (ideally 4+ years at senior level) of experience with NI TestStand for architecting, sequencing, deploying, and maintaining automated test executive systems; strong proficiency in custom step types, code modules, process models, report generation, and database integration.
• Ability to read, interpret, and critique electrical schematics; design, build, debug, and optimize custom test fixtures of medium complexity; troubleshoot hardware faults at component and system levels to root cause; ensure fixture reliability, repeatability, and safety in production environments for a range of electronic products.
• Solid understanding of manufacturing test methods for digital and analog electronics
• Excellent communication, documentation, and cross-functional collaboration abilities
• Passion for Axon’s mission and a desire to work on impactful, real-world products

Benefits that Benefit You

• Competitive salary and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• And yes, we have snacks in our offices

Benefits listed herein may vary depending on the nature of your employment and the location where you work.

Your impact

The Maintenance Engineer is responsible for improving equipment reliability, availability, and maintainability in an automated manufacturing environment. This role provides engineering ownership of preventive, predictive, and corrective maintenance strategies for automated production systems, ensuring safe, stable, and cost-effective operation. The Maintenance Engineer partners closely with Manufacturing, Controls, and Maintenance teams to reduce downtime, extend asset life, and support production scaling.

What You'll Do:

Location: Onsite at our Phoenix, AZ Pinnacle office or our Mesa, AZ Skybridge facility.
Reports to: Senior Manager, Manufacturing Engineering - Assets Reliability
Direct Reports: N/A

• Ensure that automated manufacturing equipment is reliable. This includes robots, PLC-controlled machines, conveyors, vision systems, and material handling equipment.
• Lead root cause analysis (RCA) for recurring failures, downtime events, and chronic equipment issues.
• Develop and implement corrective actions to eliminate repeat failures and improve mean time between failures (MTBF).
• Design, optimize, and sustain preventive and predictive maintenance programs aligned with equipment criticality.
• Analyze maintenance data and downtime trends to refine maintenance intervals and task effectiveness.
• Use maintenance techniques based on conditions when appropriate. This includes methods such as vibration, thermal, and runtime-based techniques.
• Create and update maintenance procedures. Write troubleshooting guides. Keep equipment documentation current.
• Standardize maintenance practices across similar equipment and production lines.
• Support spare parts strategy, critical spares identification, and inventory optimization.

Cross-Functional Collaboration

• Partner with Controls Engineers on PLC diagnostics, automation troubleshooting, and system upgrades.
• Assist Maintenance Technicians. Offer troubleshooting support, training, and technical advice.
• Collaborate with Manufacturing Engineering and Operations to support new equipment launches and process changes.

Continuous Improvement & Cost Reduction

• Drive reliability-focused continuous improvement initiatives to reduce downtime, maintenance cost, and production risk.
• Support capital equipment evaluations with maintainability and lifecycle cost input.
• Track and report key metrics including downtime, MTTR, MTBF, maintenance cost, and equipment availability.

Operational Support

• Provide on-floor engineering support during critical downtime events and production ramp-ups.
• Participate in daily production, maintenance, and reliability meetings.
• Support off-shift or weekend activities during launches, major repairs, or critical issues as required.

Qualifications

Required

• Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Mechatronics, or related field.
• 3–6 years of experience in maintenance, reliability, or automation engineering within a manufacturing environment.
• Strong understanding of automated equipment, electrical systems, and mechanical components.
• Experience performing root cause analysis and implementing corrective actions.
• Ability to work effectively in fast-paced, production-driven environments.

What you Bring

• Experience with PLC-based automation systems is important. This includes performing diagnostics and troubleshooting.
• Familiarity with CMMS systems and maintenance data analysis.
• Lean Manufacturing or Reliability Engineering experience.
• Experience supporting high-volume or high-mix automated production lines.
• Equipment reliability and failure analysis
• Automation troubleshooting
• Preventive and predictive maintenance strategy
• Cross-functional communication
• Data-driven problem solving
• Regular presence on the manufacturing floor required.
• Ability to support hands-on troubleshooting activities.
• Occasional off-shift or weekend work may be required during critical events.

Benefits listed herein may vary depending on the nature of your employment and the location where you work

As a Principal Engineer (Hardware), Advanced Packaging, you will play a key role in advancing ASM’s semiconductor process technologies. You’ll leverage your expertise in thin-film deposition and materials characterization to develop innovative solutions for next-generation devices. Your work will directly influence product performance and enable breakthroughs in logic, memory, and power applications. We are currently recruiting for multiple openings. 

What you will be working on

• Research, develop, and optimize semiconductor processes focused on Advanced Packaging including depositions and surface preparation.
• Design and conduct complex experiments using DOE and RSM methodologies; interpret and analyze experimental data.
• Troubleshoot equipment issues through hands-on engagement and ensure successful product transfer to customers.
• Provide expert technical support for complex electro/mechanical equipment and computer systems.
• Respond to and resolve issues escalated by first-line product support teams.
• Report design, reliability, and maintenance problems to engineering teams for resolution.
• Assist in customer installations and provide technical training as needed.
• Deliver support for highly technical or sophisticated products to customers and users.
• Travel globally up to 50% of the time to support field operations.

What we are looking for

• Master’s or PhD in Mechanical or Electrical Engineering preferred
• 10+ years of combined education, research, and work experience in thin-film deposition and advanced packaging processes.
• At least 5 years of experience in semiconductor process engineering or semiconductor equipment technology.
• 2-5 years of experience in customer support, product management, or product marketing roles.
• Demonstrated knowledge of hardware to process dependencies and comfort with fingerprinting chamber / tool critical components
• Proven experience in diagnosing and troubleshooting complex technical issues
• Strong understanding of electro/mechanical equipment and software systems
• Excellent problem-solving and analytical skills
• Ability to communicate effectively with both technical and non-technical stakeholders
• Strong presentation experience and skills
• Willingness and ability to travel globally up to 50% of the time; local and international
• Customer-focused mindset with the ability to manage challenging situations

As a Senior Software Engineer at ASM, you’ll sit at the intersection of cutting-edge software, complex hardware, and real-world customer impact. You’ll be a technical leader who solves the toughest software challenges in semiconductor manufacturing—driving system reliability, safety, and performance for our global customers. In this role, you won’t just fix issues—you’ll lead investigations, influence architecture, and deliver long-term, systemic improvements that power advanced semiconductor technology worldwide.

What You’ll Be Working On

• Lead deep technical investigations into software-related safety interlocks, validating corrective and preventive actions.
• Analyze and optimize multiple interacting subsystems, gaining end-to-end understanding of full platform workflows.
• Drive root cause and corrective action (RCCA) using packet captures, log correlation, and system-level analysis.
• Design and evaluate subsystem architectures, including multi-threading and scheduler interactions.
• Develop, test, deploy, maintain, and continuously improve software for advanced semiconductor manufacturing equipment.
• Troubleshoot complex software issues, including real-time control systems.
• Act as a technical escalation point—supporting field engineers and customers globally.
  Partner with QA and Support to reproduce field issues and strengthen regression coverage.
• Author and review system specifications, software designs, and test plans.
• Investigate internal and external technical inquiries, delivering clear analysis and actionable solutions.
• Evaluate and influence software engineering tools and system design decisions.
• Plan and coordinate rapid software fixes and deployments in high-impact environments.
• Present technical insights, progress, and outcomes in customer QBRs, including findings from complex DOE analyses.

What We’re Looking For

• Bachelor’s degree in Computer Science (or related field) with 10+ years of industry experience, or Master’s degree with 4+ years, or PhD with 3+ years of relevant experience
• Strong software development expertise in C++ and/or C#
• Experience developing for Windows and real-time operating systems
• Solid understanding of multi-threaded applications
• Experience working with software documentation, specifications, and APIs

What Sets You Apart

• Advanced degree (Master’s or PhD) and experience in software architecture and machine control systems, ideally within semiconductor equipment
• Hands-on experience with GUIs, device drivers, and interrupt-driven software
• Knowledge of data communications, networking, and EtherCAT
• Understanding of dynamic scheduling algorithms and deadlock avoidance
• Proficiency with development tools such as debuggers, application builders, and configuration management systems
• Ability to triage and diagnose mechanical, electrical, and software issues holistically
• Strong analytical skills, including designing and interpreting complex DOEs using multivariate methods or PCA

As a (Senior) Principal Engineer (Process and Hardware), Advanced Packaging, you will play a key role in advancing ASM’s semiconductor process technologies. You’ll leverage your expertise in thin-film deposition and materials characterization to develop innovative solutions for next-generation devices. Your work will directly influence product performance and enable breakthroughs in logic, memory, and power applications. We are currently recruiting for multiple openings. 

What you will be working on

• Research, develop, and optimize semiconductor processes focused on Advanced Packaging including depositions and surface preparation.
• Design and conduct complex experiments using DOE and RSM methodologies; interpret and analyze experimental data.
• Collaborate with customers and marketing teams to define requirements and execute demonstrations.
• Troubleshoot equipment issues through hands-on engagement and ensure successful product transfer to customers.
• May supervise process engineering technicians and provide input on performance evaluations.
• Provide expert technical support for complex electro/mechanical equipment and computer systems.
• Respond to and resolve issues escalated by first-line product support teams.
• Report design, reliability, and maintenance problems to engineering teams for resolution.
• Assist in customer installations and provide technical training as needed.
• Deliver support for highly technical or sophisticated products to customers and users.
• Travel globally up to 50% of the time to support field operations.

What we are looking for

• Master’s or PhD in Chemical Engineering, Materials Science, Mechanical or Electrical Engineering preferred
• 10+ years of combined education, research, and work experience in thin-film deposition and advanced packaging processes.
• At least 5 years of experience in semiconductor process engineering or semiconductor equipment technology.
• 2-5 years of experience in customer support, product management, or product marketing roles.
• Demonstrated knowledge of hardware to process dependencies and comfort with fingerprinting chamber / tool critical components
• Ability to manage complex process development projects, including schedules, budgets, and personnel.
• Proven experience in diagnosing and troubleshooting complex technical issues
• Strong understanding of electro/mechanical equipment and software systems
• Excellent problem-solving and analytical skills
• Ability to communicate effectively with both technical and non-technical stakeholders
• Strong presentation experience and skills
• Willingness and ability to travel globally up to 50% of the time; local and international
• Customer-focused mindset with the ability to manage challenging situations

Role overview

At ASM, the Software Engineering team works on delivering software that has immediate, tangible results visible in the operation of semiconductor processing equipment hardware. The hardware includes robotics, gas valves, temperature controllers and other hardware. Come join our team and have the opportunity to:

• Develop Advance software for cutting edge tech
• See your work have real results by driving the most advanced HW in the SEMI industry
• Work with a global team full of talented Software Engineers
• Solve complex problems using AI/ML/Advanced Algorithms/Data Science
• Be part to the team that leads the next generation of SEMI manufacture control Software technology and trends
• Travel globally and visit major chip makers FAB sites
• Work in Phoenix, the heart of the next SEMI tech hub

Note: This role is intended for candidates who are graduating in Spring 2026 or have graduated within the past two years and have 0–2 years of professional work experience.

Responsibilities

• Design, develop, test, deploy, maintain and improve software for our semiconductor manufacturing equipment
• Developing for Windows and Windows Real-time Operating Systems
• Troubleshoot and resolve computer software issues, including real-time software control systems
• Able to triage mechanical, electrical and software bugs
• Responsible to manage escalation calls with field support engineers and customers at a national and global level
• Work with QA / Support team to add replicated bugs to regression
• Author, revise, and review system specifications, software designs, test plans, and other software documentation.
• Investigate both internal and external inquiries, questions and problem reports. Offer problem analysis, solutions, or alternatives as a result of these investigations.
• Evaluate software engineering tools.
• Participate in system design teams.
• Travel to customer sites to support installations, training, and troubleshooting of ASM products.
• Develop schedules for software development efforts.
• Provide engineering solutions to resolve all software issues
• Evaluating new software and hardware tools for possible department use

Minimum Qualifications

• Strong software development skills in C++ 
• 1+ years’ experience as a generalist or mid-stack software development with a Bachelor's degree OR recently graduated with Masters degree in Computer Science, Computer Engineering or Computer Systems
• Graduating in Fall 2025 or graduated within the past two years
• 0–2 years of professional work experience

Preferred Qualifications

• Strong software development skills in C++ and C#
• Educational background in Computer Science or Computer Systems
• Experience working with multiple items listed below
  • Software for Machine Control (including Semiconductor equipment) 
  • Developing for Windows and Windows Real-time Operating Systems
  • Multi-threaded applications
  • Real-time software
  • Graphical User Interfaces
  • Device drivers or other interrupt driven software preferred
  • Data Communications and Networking
  • Knowledge of programming tools such as text editors, debuggers, application builders and configuration management tools.
  • Ability to read code and understand the functionality implemented and the ability to translate the functionality into another piece of software
  • Comprehend software documentation including specification and design documents, communication interface specific and API description

working as part of the Global Quality team, this role will work alongside Business Unit Engineers, Product Support, Field Teams, Supplier Quality, Manufacturing, and other business functions toward the goal of resolving “non-conformance” issues that are encountered by our manufacturing & field teams and determined to be either high customer impact or systemically caused. This role also includes meeting directly with Customers as well as presenting solutions and status to both customers and various levels of ASM management.

Responsibilities:

• Act as Single Point of Contact, on behalf of Global Quality, for given product lines
• Also act as Single Point of Contact for key customer Field Teams on quality concerns
• These responsibilities require building a fundamental understanding of the quality concern identified, determining the best solution path and driving appropriate action
• Drive, within ASM’s Toll Gate process, building in quality for New Product Introductions
• Work with BU personnel to create Critical Part definition, Design FMEAs and score progress in a Design For Quality scorecard
• Drive down Non-Conformances (NCs) for given product lines & customers
• Through NC data analytics, identify trends, systemic issues, repeat issues, their causes and drive team solutions
• Work with other members of the Quality teams and management to roll out efficiency and continuous improvement efforts
• Working with cross-functional teams, institute solutions focused on permanently solving root cause and preventing similar occurrences
• Communicate solutions & experiences with colleagues to solve common issues existing across multiple products

Qualification:

• Bachelor’s degree, Master’s preferred, in Mechanical, Electrical or Material Science Eng;  PhD is a plus
• 7-10 years of experience in semiconductor, or similar technical industry, in engineering role with a strong focus on quality
• Experience with Structured Problem Solving (e.g. 8D, C4, A3 etc.) and FMEA
• Experience with Project Management
• Experience with Quality Management Systems, Quality Assurance and Process Control; part fabrication experience is a plus
• Six Sigma Green Belt; Black Belt is a plus
• Ability to build organizational awareness and collaborate in a global setting is required
• Ability to influence, persuade, and position the value-building quality within products
• Strong analytical skills with the ability to use logic and data to make factual assessments
• Ability to drive or oversee issues to full resolution