We are seeking a skilled Water Treatment Engineer to support the performance, reliability, and optimization of ultrapure and wastewater treatment systems in a semiconductor manufacturing environment. The ideal candidate will have hands-on experience with wastewater treatment systems, strong data analysis skills, and a proven ability to troubleshoot and enhance complex water treatment processes.

Responsibilities:

• Monitor and assess the condition and performance of wastewater treatment systems
• Analyze operational data (pressure, flow rate, conductivity, etc.) to optimize system performance
• Adjust maintenance schedules based on system performance data and trends.
• Troubleshoot and optimize chemical dosing and regeneration parameters to minimize downtime and improve reliability.
• Identify and analyze biological, chemical, or particulate fouling sources.
• Collaborate with engineering teams to modify operational parameters or implement pre-treatment strategies.
• Develop, update, and maintain standard operating procedures (SOPs) to ensure compliance with performance and safety standards.
• Any other duties or responsibilities that may be assigned to you in your role.

Skills Required:

• 3+ years in wastewater or ultrapure water treatment system operations and maintenance engineering.
• Semiconductor or high-purity water treatment experience is a plus.
• Strong technical knowledge of water treatment systems
• Excellent analytical, troubleshooting, and problem-solving skills.
• Ability to interpret and act on complex system data.

Education / Licenses / Certifications:

• Bachelor’s degree in Mechanical, Chemical, Environmental Engineering, or a related discipline preferred.
• Proof of education, licenses, and certifications will be required where applicable. 

Benefits:

• Medical, Dental and Vision Insurance 
• Life, Short-Term, Long-Term Disability Insurance 
• Training and Education Assistance 
• 401k Retirement Plan 
• Extra Annual Leave with Years of Service 
• Maternity/Paternity Leave 
• Recognition Rewards

#LI-DNP

Position Summary

The Lead R&D Engineer is responsible for managing group engineers and leading the design and validation of new medium voltage power distribution products. This role includes performing and overseeing complex projects that require extensive 3D modeling and 2D drafting while ensuring design accuracy and alignment with project requirements. The Lead R&D Engineer facilitates the development of innovative products that meet industry standards, regulatory requirements, and customer needs while optimizing performance, manufacturability, and cost. Additionally, the Lead R&D Engineer directly manages engineers and collaborates with the Engineering Manager to proactively identify and address project and personnel challenges, ensuring successful outcomes.

Key Responsibilities

•  Lead the design, analysis, and validation of new medium voltage power distribution products, including metal clad and metal enclosed switchgear, and related components.
•  Responsible for managing and mentoring engineers and designers, providing career guidance, constructive feedback, tracking project timelines, and ensuring quality and efficiency in deliverables.
•  Working closely with the Engineering Manager to identify issues quickly and ensure they are addressed in an appropriate and timely manner.
• Driving group on time performance while minimizing design errors for NPI project deliverables.
•  Leading the development of mechanical designs to meet NPI project-specific requirements.
• Conducting peer reviews and providing constructive feedback to team engineers to improve design quality and ensure alignment with project goals.
• Mentoring and supervising group engineers and designers to foster team growth and ensure efficient workflow in a collaborative environment.

New Process Implementation (NPI):

• Ensure NPI projects comply with customer specifications, industry standards, manufacturability, and internal quality benchmarks.
• Track project metrics such as TTM, design errors, and revision cycles to areas for improvement with the engineering manager.

Technical Leadership and Mentorship:

•  Foster a culture of innovation and continuous improvement within the team.
• Provide guidance and mentorship to team members, promoting professional growth.
• Resolve team conflicts to maintain a productive working environment.
• Assist in training team members in best practices for 3D SolidWorks modeling, 2D AutoCAD drafting, and compliance with design standards.
•  Provide constructive feedback during peer reviews to improve the team's technical output.

Collaboration and Support:

•  Facilitate communication between design and manufacturing teams to align processes.
•  Establish a feedback loop with manufacturing engineers to optimize designs for manufacturability and to adjust design standards.
• Act as a point of contact for technical inquiries for the operations team.
•  Facilitate communication and collaboration across multiple engineering and manufacturing sites to align expectations and processes.

Qualifications

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering or a related field, MSME is preferred.
•  10+ years of experience in R&D, product development, or a related field within the power distribution industry.
• Demonstrated track record of leading successful engineering projects and developing new technologies.
• Experience in medium voltage power distribution systems, including electrical, thermal, and mechanical considerations.
• Experience in leadership and mentoring and fostering a culture of innovation and continuous improvement.
• Experience working in a design-to-order or custom engineering environment is strongly preferred.
• Ability to manage multiple projects and prioritize tasks effectively in a fast-paced environment.
• Familiarity with low voltage switchgear, panelboards, utility systems, or the power industry is preferred.
• Proficiency in sheet metal design, including manufacturability and cost optimization.
• Strong attention to detail, analytical thinking, and problem-solving abilities.
•  Proficiency with SolidWorks, AutoCAD, or similar; CFD (Computer Fluid Dynamics) or Finite Element Analysis (FEA) experience is a plus.
• Knowledge of IEEE/ANSI C37.20.2, C37.04, C37.06, C37.09; CSA C22.2 No. 31-M89; EEMAC G8-3.2 design guidelines and NFPA70E are desirable.
• Strong communication skills, both written and verbal, with the ability to collaborate across teams.

Location

This position is available in multiple locations, including Franklin (TN), Tualatin (OR), Jacksonville (FL).

Position Summary

The BOD (Basis of Design) Program Manager is responsible for the leadership, planning and execution of multiple high priority and/or strategic BOD Projects; high-flow production orders in an engineer to order environment. This role ensures that all Engineering-related milestones (Design Reviews, Design Releases, Production Readiness Reviews, etc.) are completed on time and to the highest standards of quality. The BOD Program Manager will lead, manage and collaborate cross-functionally among Sales, Engineering, Operations, and Senior Management.

Key Responsibilities

• Lead cross-functional Project Teams, successfully driving projects to completion.
• Collaborate and influence resources managers to implement, monitor, and maintain the resources capacity planning for their projects.
• Schedule, facilitate, and document kickoff meetings, design reviews, and Production Readiness Reviews.
• Track progress of design activities across electrical, mechanical, wiring, manufacturing and process engineering disciplines
• Coordinate follow-up communications after Engineering release, ensuring Quality, Operations, and Sales have required documentation
• Act as the central point of communication for Sales, Engineering, Operations, and Senior Management on BOD Project status and deliverables.
• Coordinate with Operations to ensure production readiness: run the meeting, create punch lists, and follow up to resolution and provide formal notification to relevant stakeholders
• Coordinate change management for customer-driven change notices and major design revisions.
• Notify Senior Management and Engineering Leadership of gate review readiness and assist in lessons learned sessions for continuous process improvement
• Report project performance to management stakeholders
• Influence and support Project Management team members on best practices

Qualifications

Competencies:

• Demonstrated ability to plan, execute, and oversee complex process milestones on time and in accordance with company standards
• Proficiency with Project Management tools for scheduling, task tracking, and milestone monitoring
• Exceptional organizational skills to manage multiple tasks, meetings, and priorities simultaneously
• Strong verbal and written communication skills to effectively lead and coordinate cross-functional stakeholders
• Excellent analytical and problem-solving skills to identify process bottlenecks and drive resolution
• Commitment to continuous improvement and implementation of best practices
• Exceptional ability to build and maintain collaborative relationships with key stakeholders, including Senior Management.
• Proficient in Microsoft Office Suite (Project, Word, Excel, PowerPoint), and Microsoft Teams
• Familiarity with engineering review processes, production readiness protocols, and manufacturing process workflows.
• Strong ability to negotiate through conflicts; listening, understanding, problem solving, patience.

Education and Experience

• Bachelor’s degree in Engineering, Program Management, or related field
• 5+ years of project management or related experience within an engineering or manufacturing environment
• Demonstrated capability leading high complexity and/or strategic projects
• Experience facilitating technical design reviews and manufacturing readiness assessments
• Expert written and verbal communication skills
• PMP (Project Management Professional) or equivalent certification a plus

Workplace Conditions

• Flexible work location (on-site, hybrid, or remote based on business needs)
• Travel requirements based on Project and Stakeholder needs
• Collaborative, cross-functional team environment supporting Design Engineering delivery and Project Execution

Compensation

The salary range for this role is $130,000 -$150,000 per year, based on location, experience, and qualifications.

The Account Manager is responsible for developing long-term customer relationships and maximizing account penetration and customer retention with contractor and consulting engineer accounts. Promotes CMS products and services by providing technical solutions to the customer's business and operational needs as well as demonstrating applicable technical knowledge. Seeks to expand the depth of offerings within each account. Participates as a member of account team on key and target customers and projects. 

The company culture values honesty, integrity, dedication, resourcefulness, independence, and taking ownership.

Location: Portland, OR. 100% commission position/eligible for draw.
This position is eligible for full benefits, including medical, dental, vision, paid time off, and retirement options.

Job responsibilities include (but are not limited to) the following:

• Identifies potential opportunities with existing and new customers.

• Collects project data and compares to CMS’s capabilities.

• Develops relationships with multiple buying influences in the customer’s organization, including project managers, project engineers, construction, purchasing, and accounts payable.

• Builds partnering relationships with contractors and consultants responsible for the decision-making process to drive the sales of CMS offerings. Actively listens, probes and identifies concerns.

• Determines project needs, constraints, and responsibilities to meet customer’s HVAC system design and installation requirements.

• Develops, evaluates, and discusses possible solutions with customer.

• Responsible for project take-off, selection, and pricing of equipment and services.

• Develops project fulfillment schedule. Responsible for ordering, tracking, customer follow-up, and management of project.

• Responsible for the preparation and review of the proposal. Determines price and selling strategy.

• Reviews and compares contract terms and conditions with CMS contract standards.

• Presents the proposal and negotiates price, terms, and conditions with customer.

• Determines customer needs, develops and executes an account specific business plan.

• Assists in the development of CMS sales and marketing plans and strategies. Aids in the implementation of these strategies and action plans. Provides total account business activity reports and annual forecasts.

• Coordinates with consulting engineers in writing project specifications.

• Authorizes replacement, credit, or refund as necessary to facilitate the refund/exchange process including negotiation of back charges and customer disputes.

• Positively and credibly influences system design and construction with contractors and consultants. Frequently creates competitive, high quality and timely estimates, bids, proposals, and cost/benefit analysis. Effectively writes, presents and communicates bids. Negotiates value, addresses resistance when demonstrated and closes the sale.

• Assists customers in answering technical questions on HVAC systems, CMS products, system application alternatives, installation, operation, maintenance, and problem resolution.

• Flexibility to work outside normal work hours, as required.

• Maintains memberships with ASHRAE, USGBC and other industry organizations. Actively attends meetings.

Education & Experience Requirements:

Bachelor's degree in engineering from four-year college or university; or equivalent combination of education and experience.

Familiarity with HVAC systems and temperature control equipment preferred. The Account Manager works in a typical office environment with occasional visits to project sites, which includes outdoor work and work in mechanical/equipment rooms.

Account Managers must have exceptional written and verbal communications skills. Candidate must demonstrate the ability and willingness to communicate in a clear, concise, and diplomatic manner. Outstanding attention to detail and excellent organizational skills are critical, as are honesty and the ability to develop and maintain deep customer relationships based on trust. Candidate must be passionate about helping our customers to be successful, and must continually strive to improve their understanding of our customers in order to provide first-class customer service.

Position Summary

The Lead R&D Engineer is responsible for managing group engineers and leading the design and validation of new low voltage power distribution products. This role includes performing and overseeing complex projects that require extensive 3D modeling and 2D drafting while ensuring design accuracy and alignment with project requirements. The Lead R&D Engineer facilitates the development of innovative products that meet industry standards, regulatory requirements, and customer needs while optimizing performance, manufacturability, and cost. Additionally, the Lead R&D Engineer directly manages engineers and collaborates with the Engineering Manager to proactively identify and address project and personnel challenges, ensuring successful outcomes.

Key Responsibilities

•  Lead the design, analysis, and validation of new medium voltage power distribution products, including metal clad and metal enclosed switchgear, and related components.
• Responsible for managing and mentoring engineers and designers, providing career guidance, constructive feedback, tracking project timelines, and ensuring quality and efficiency in deliverables.
•  Working closely with the Engineering Manager to identify issues quickly and ensure they are addressed in an appropriate and timely manner.
•  Driving group on time performance while minimizing design errors for NPI project deliverables.
• Leading the development of mechanical designs to meet NPI project-specific requirements.
• Conducting peer reviews and providing constructive feedback to team engineers to improve design quality and ensure alignment with project goals.
•  Mentoring and supervising group engineers and designers to foster team growth and ensure efficient workflow in a collaborative environment.

New Process Implementation (NPI):

• Ensure NPI projects comply with customer specifications, industry standards, manufacturability, and internal quality benchmarks.
• Track project metrics such as TTM, design errors, and revision cycles to areas for improvement with the engineering manager.

Technical Leadership and Mentorship:

•  Foster a culture of innovation and continuous improvement within the team.
• Provide guidance and mentorship to team members, promoting professional growth.
• Resolve team conflicts to maintain a productive working environment.
• Assist in training team members in best practices for 3D SolidWorks modeling, 2D AutoCAD drafting, and compliance with design standards.
•  Provide constructive feedback during peer reviews to improve the team's technical output.

Collaboration and Support:

•  Facilitate communication between design and manufacturing teams to align processes.
• Establish a feedback loop with manufacturing engineers to optimize designs for manufacturability and to adjust design standards.
• Act as a point of contact for technical inquiries for the operations team.
• Facilitate communication and collaboration across multiple engineering and manufacturing sites to align expectations and processes.

Qualifications

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering or a related field, MSME is preferred.
•  10+ years of experience in R&D, product development, or a related field within the power distribution industry.
• Demonstrated track record of leading successful engineering projects and developing new technologies.
• Experience in medium voltage power distribution systems, including electrical, thermal, and mechanical considerations.
• Experience in leadership and mentoring and fostering a culture of innovation and continuous improvement.
• Experience working in a design-to-order or custom engineering environment is strongly preferred.
• Ability to manage multiple projects and prioritize tasks effectively in a fast-paced environment.
• Familiarity with low voltage switchgear, panelboards, utility systems, or the power industry is preferred.
• Proficiency in sheet metal design, including manufacturability and cost optimization.
• Strong attention to detail, analytical thinking, and problem-solving abilities.
•  Proficiency with SolidWorks, AutoCAD, or similar; CFD (Computer Fluid Dynamics) or Finite Element Analysis (FEA) experience is a plus.
• Knowledge of IEEE/ANSI C37.20.2, C37.04, C37.06, C37.09; CSA C22.2 No. 31-M89; EEMAC G8-3.2 design guidelines and NFPA70E are desirable.
• Strong communication skills, both written and verbal, with the ability to collaborate across teams.

Location

This position is available in multiple locations, including Franklin (TN), Tualatin (OR), OR Jacksonville (FL).

Position Summary

The R&D Mechanical Engineer (Level I- Sr.) is responsible for collaborating or leading the design, testing and certification of innovative electrical power products in collaboration with a diverse team of electrical, mechanical and manufacturing engineers. This role requires a strong intuition of fundamental engineering concepts across multiple disciplines and an ability to effectively manage the product development process under limited direction.

Key Responsibilities

• Ensure the execution and implementation of the New Product Introduction (NPI) engineering work for assigned projects.
• Collaborate with Senior and Lead Engineers in writing detailed engineering specifications and developing concept drawings in collaboration with Sales and other stakeholders.
• Coordinate with Nationally Recognized Testing Laboratories (NRTLs) to define product evaluation and certification scope.
• Lead the creation of detailed design drawings, 3D models and bills of material for prototype equipment and test articles.
• Develop and document test plans according to the relevant standards. Common tests include full-load temperature rise, dielectric and BIL, short-circuit and withstand current, mechanical endurance, component failure, environmental, functional and seismic shake-table tests.
• Support the testing process at in-house and third-party laboratories. Travel up to 20% to support testing and other product development tasks in-person. Evaluate test results and revise designs based on empirical data and established engineering concepts.
• Characterize the electrical, thermal and mechanical performance of common design elements through testing, simulation and/or analytical methods. Develop standard design criteria and models.
• Work closely with manufacturing engineering to implement Design for Manufacturability (DFM) concepts throughout the new product development process.
• Working with Mechanical Designers,
• Conduct failure analyses of existing products and identify opportunities for continuous improvement

Qualifications

• Minimum 3 years of experience designing low and/or medium voltage power distribution equipment or related products.
• BSME or equivalent in experience.
• Experience with NRTL (UL, CSA, etc.) evaluation, testing and certification processes.
• Experience with common standards for electrical equipment (UL 891, 1558, 508A; IEEE C37.20, etc.)
• Design Experience using SolidWorks to produce 3D models is highly preferred.

About IEM

Industrial Electric Mfg. (IEM) is the largest independent full-line manufacturer of custom power distribution systems in North America. Founded more than 75 years ago in Fremont, California, IEM grew alongside Silicon Valley and today operates over 1.7 million square feet of manufacturing capacity. With $1B+ in annual sales and 10,000+ commissioned projects across technology, data centers, commercial, energy, utilities, healthcare, industrial, and infrastructure markets, IEM continues to deliver exceptional product quality, dependable service, and the flexibility to meet complex technical requirements at scale.

Position Summary

The Switchgear Application Expert is the senior technical escalation point for complex pre‑sales and post‑sales inquiries related to IEM’s low- and medium-voltage switchgear, switchboards, panelboards, and related distribution products. The role provides Tier‑2 and Tier‑3 support across Pre‑Sales, Order Review, Engineering, Production, Field Services, Quality, Product Management, and Customer Support, ensuring that solutions are technically sound, compliant with codes/standards and UL procedures, and manufacturable at scale. The Application Expert combines deep protection & controls, three‑phase power, and standards knowledge with strong cross‑functional collaboration to de‑risk projects, resolve field issues, and drive continuous improvement.

Ideal Candidate Profile

• Seasoned application or engineer with strong power systems with OEM background and familiar with LV and MV distribution equipment who enjoys being the “go‑to” technical expert.
• Comfortable reviewing complex specifications, single‑line diagrams, CDEs, and relay schemes, and explaining trade‑offs to both technical and non‑technical stakeholders.
• Thrives in a fast‑paced environment balancing urgent escalations with long‑term improvements to standards, tools, and processes.

Key Responsibilities

1. App Expert / Cross‑functional Technical Leadership

• Serve as the primary Application Expert for complex and non‑standard applications of IEM switchgear and related products.
• Act as a technical liaison between Sales, Estimation, Engineering, Production, Field Services, Quality, and Product Management, ensuring consistent interpretation of standards, UL procedures, and IEM practices.
• Identify recurring technical issues and lead or support initiatives to improve standard designs, tools, and documentation.

1. Pre‑Sales Inquiries

• Support Estimation and Inside Sales by validating complex CDEs, custom enclosure footprints, and utility‑interface requirements against IEM standard offerings and UL procedures.
• Review IEM quotes and CDEs for alignment with customer specifications, codes, and IEM practices; provide clear technical clarifications and risk flags.
• Perform in‑depth technical reviews for projects with high technical P&C requirements, paralleling controls, unusual system topologies, or non‑standard configurations.
• Determine when proposed solutions fall outside standard UL procedures or IEM product offerings and coordinate with Development / R&D / Product Engineering to define acceptable alternatives or exceptions.

1. Product Team Support

• Provide structured feedback to Product Management and R&D based on trends in pre‑sales questions, production issues, and field events.
• Participate in product roadmap and design reviews as the “voice of application,” ensuring new offers are practical to apply, commission, and service.
• Support validation of new features or product lines through application testing, documentation review, and internal training for Sales, Engineering, and Field Services.

1. Production Support

• Review and advise on installation methods and minor drawing clarifications when production questions arise.
• Evaluate production/installation defects to determine whether material replacement or limited rework is required.
• Lead major technical reviews when production or QC identifies issues that may impact code compliance, UL procedure adherence, safety, or functionality.
• Confirm that electrical and mechanical designs meet applicable codes, standards, and IEM UL procedures; propose robust solutions that minimize shipment delays, rework, and added cost.
• Act as mediator between Engineering, Production, and QC on complex issues, driving clear decisions and documented resolutions.

1. Engineering Support

• Support design engineers with general design reviews and returned customer submittal comments; clarify specifications and ensure project requirements align with IEM standard practices and UL procedures.
• Confirm UR components are correctly selected and within applicable UL files.
• Own major technical reviews that require deeper analysis, research, and justification to meet challenging design or specification requirements.
• Provide expert guidance on power system configuration, protection & controls, and communication architectures for complex projects.

1. Order Review

• Review order entry and acknowledgment forms against the approved quote, CDE, specifications, and single‑line diagrams; identify discrepancies early and work with Engineering to define technical solutions.
• Collaborate with Engineering and Sales to review “show‑stopper” items identified during Tier‑2 review that cannot be resolved without customer buy‑in.
• Define technically sound alternatives, articulate risks and constraints, and support customer discussions as needed.

1. Customer Support (Post‑Sales)

• Address advanced customer questions on submittals, dimensional changes, and specification clarifications that are not yet formal service issues.
• Provide troubleshooting guidance on equipment based on drawings, settings, and documentation prior to Service engagement.
• Lead complex customer escalations involving design interpretation, protection & controls performance, or systemic issues.
• Participate in technical meetings and root‑cause discussions with key customers and internal stakeholders, ensuring a strong technical basis for decisions.

1. Field Services Support

• Provide diagnostic support for high‑profile site events (e.g., mis‑operations, major outages, arc‑flash incidents, or site stoppages).
• Analyze relay/event logs, test reports, and site conditions to identify root causes and recommend corrective and preventive actions.
• Assist in preparing in‑depth corrective action reports, including independent research and coordination with Engineering, Quality, and Product teams.

1. Quality Support

• Support QC teams on testing requirements, guidelines, and interpretation of standards and UL procedures.
• Complete assigned nonconformance investigations, including analysis of cause, risk, and preventive actions.
• Provide technical research and feedback on major quality events, including arc‑flash or site stoppage incidents, and translate findings into updates to standards, templates, or training.

Qualifications

• Bachelor’s degree in electrical engineering (BSEE) or equivalent technical experience.
• 5+ years of experience in application engineering, design engineering, or field service for low- and/or medium-voltage switchgear, switchboards, or related power distribution equipment.
• Strong knowledge of three‑phase power systems, protection and control schemes, and communication protocols commonly used in power systems.
• Solid understanding of applicable codes and standards (e.g., NEC, UL 891/1558/508A, IEEE/ANSI) and how they apply to IEM products and UL procedures.
• Proficiency in reading and interpreting single‑line diagrams, schematics, wiring diagrams, and mechanical assembly drawings; AutoCAD experience strongly preferred.
• Demonstrated ability to perform structured root‑cause analysis and to lead cross‑functional investigations.
• Strong written and verbal communication skills, with the ability to explain complex technical concepts to both technical and non‑technical stakeholders.
• Proven track record of managing multiple priorities in a fast‑paced, project‑driven environment.

Preferred

• Experience with power system analysis and protection coordination tools.
• Prior experience in a deep technical support, field service, or product engineering role for LV/MV equipment.
• Familiarity with data center, industrial, or utility applications where high reliability and availability are critical.

Workplace Conditions

• Onsite or remote role with primary collaboration with the Application Engineering team, Sales, Engineering, Production, Field Services, and Product Management.
• Occasional meetings with colleagues across time zones may require flexibility in working hours.
• Travel expectations: Minimal; may include periodic visits to manufacturing facilities, project sites, or customer locations for investigations or technical meetings.

As a Mechatronics Specialist/Engineer, you will play a pivotal role in designing and optimizing state-of-the-art electromechanical systems. Your expertise will drive the innovation of our motor designs and control systems, enhancing efficiency and performance.

Responsibilities:

• Specify, test, and tune BLDC motors, harmonic drives, and customized gearboxes.
• Design motor control firmware (FOC) for maximum efficiency and torque density.
• Collaborate with mechanical engineers on joint design and thermal management.

Required Skills:

• Deep understanding of electromechanical systems and motor physics.
• Experience writing firmware in C/C++ for microcontrollers.
• Hands-on experience with industrial communication protocols (EtherCAT, CAN bus).

Position Summary

A rapidly growing company is seeking a detail-oriented and highly skilled Mid-Level QA Engineer to join the team. This role plays a crucial part in ensuring software and hardware quality, verifying feature implementations, and maintaining stability throughout the development lifecycle.

The QA Engineer will work closely with the development and product teams to define test plans and test cases based on requirements documents or user stories, execute structured test plans, test new features, and validate bug fixes. The successful candidate will be responsible for maintaining test coverage across web and mobile applications, identifying defects, and ensuring products meet high-quality standards before release.

This role is specifically focused on bridging quality on in-house charging station production to ensure both hardware and software meet the company’s quality standards. The QA Engineer will work closely with charging station developers, mechanical engineers, and software engineers to ensure that charging stations are thoroughly tested with an emphasis on quality across the product stack.

In addition to traditional QA responsibilities, this role includes hands-on validation of charging station hardware and real-world system behavior. The ideal candidate will be comfortable working with physical devices, executing real charging scenarios, and validating how software, firmware, and hardware interact under real operating conditions.

Key Responsibilities

• Design and maintain test plans and test cases based on product requirements and system behavior.
• Perform testing across integrated systems (device + backend + application), ensuring correct behavior across system interactions.
• Execute and validate end-to-end charging workflows, including real-world scenarios with vehicle charging sessions.
• Verify system behavior under varying conditions (e.g., multiple vehicles, load distribution, prioritization, and state transitions).
• Validate charging performance, including charge rates and power delivery against expected system behavior.
• Test system behavior under edge conditions (e.g., network interruptions, restarts, partial failures).
• Debug issues across hardware, firmware, backend, and application layers by analyzing logs and observed system behavior.
• Identify, document, and reproduce defects across testing, staging, and production environments.
• Collaborate with engineering, product, and hardware teams to ensure quality across the full system.

Years of Experience

• 3–5 years of experience in QA or testing roles, with a preference for candidates who have demonstrated strong problem-solving ability, ownership, and the ability to ramp quickly in complex, integrated system environments.

Hard Requirements

Technical Skillset

• Strong proficiency in manual testing techniques across software and integrated systems (black box and grey box), including the ability to validate behavior beyond individual features.
• Experience testing or validating integrated systems (device + backend + application), with an understanding of how components interact in real-world scenarios.
• Experience with test case management tools (e.g., TestRail) and ability to design, organize, and maintain effective test coverage.
• Familiarity with project management tools (e.g., JIRA) and working within Agile development environments.
• Experience with API testing tools (e.g., Postman), including validating request/response flows and system integrations.
• Basic knowledge of SQL for data validation and verifying system behavior across backend services.
• Strong working knowledge of UNIX/Linux environments, including the ability to test, observe, and troubleshoot directly on charging station devices.
• Familiarity with Git and command-line tools for navigating codebases, logs, and system environments.
• Ability to interpret and correlate device logs, backend logs, and system outputs to diagnose issues across multiple system layers.
• Strong troubleshooting skills, with the ability to investigate issues across hardware, firmware, and software boundaries.

Core Expertise

• Comprehensive Testing Skills — Strong expertise in manual testing across web, mobile, and integrated systems, with a solid understanding of black box and grey box techniques.
• System & Integration Validation — Ability to validate end-to-end workflows and system behavior across multiple components, including real-world scenarios involving hardware and backend interactions.
• Debugging & Diagnostic Skills — Proficiency in using developer tools, logs, and system data to troubleshoot issues across device, backend, and application layers.
• Technical Proficiency — Strong understanding of REST APIs, SQL for data validation, and basic web technologies. Ability to validate system integrations and ensure data integrity.
• Cross-Platform & Real-World Testing — Experience testing across platforms (web, mobile, and devices), with the ability to identify platform-specific issues and validate behavior under varying system conditions.
• Agile & Cross-Functional Collaboration — Experience working in Agile environments and collaborating effectively with software, firmware, and hardware teams.
• Communication & Documentation — Strong written and verbal communication skills, with the ability to clearly document defects, test results, and system behavior.

Bonus Skills (Preferred, but not Required)

• Strong understanding of version control systems (e.g., Git) and command-line interfaces.
• Experience with automated testing tools (e.g., Playwright, Selenium) or performance testing tools (e.g., JMeter, Siege).
• Familiarity with EV charging protocols (e.g., OCPP, ISO15118) or similar communication frameworks within the EV ecosystem.
• Understanding of CI/CD pipelines and how testing integrates into release workflows, including build validation, regression testing, and deployment verification.
• Experience supporting or coordinating software release processes, including working across development, QA, and operations teams to ensure smooth, stable, and timely deployments.
• Experience setting up and maintaining test environments, including configuration, deployment, and troubleshooting.
• Experience validating releases in staging or production-like environments, with an understanding of rollout risks and system-level impact.

Additional Bonus

• Hands-on experience in testing for integrated systems.
• Background in mechanical or electrical engineering.
• Background in software engineering.

Soft Skills

• Attention to Detail: Exceptional attention to detail to catch subtle errors and inconsistencies that could lead to larger issues down the line.
• Critical Thinking: The ability to approach problems methodically and use data-driven insights to make informed decisions. A keen analytical mind that questions assumptions and seeks new solutions.
• Adaptability: The capacity to quickly adjust to new challenges and changes in project requirements or technologies, maintaining effectiveness in a dynamic environment.
• Team Collaboration: Strong team player skills, with the ability to work cooperatively with developers, other QA testers, and project managers to achieve common goals.
• Leadership Potential: While primarily a contributor role, potential for leadership is a plus, including the ability to mentor junior staff or lead testing segments of projects.

Why Join

• Be part of a dynamic and fast-growing company
• Competitive Salary
• Benefits Package includes:
• Medical, Dental and Vision insurance
• Paid Holidays
• Paid Time Off
• Ability to Participate in Electric Vehicle Incentive Program
• Ability to Participate in Company 401K Plan with match
• Quarterly Mental Health Days
• Employee Educational Reimbursement

Final compensation will be determined based on experience and skills, but will sit in a range of $80,000 - $90,000

The company is an Equal Opportunity Employer (EOE) and offers a remote-friendly work environment with benefits and the opportunity for personal growth as well as advancement within the company.

Engagement Structure

This role begins as a 1099 independent contractor engagement for up to three (3) months, with the intention of converting to a permanent, full-time position based on mutual fit and performance during the contract period. Benefits listed above apply upon conversion to a permanent employee.

** This position is not eligible for visa sponsorship for external candidates. Candidates cannot require sponsorship now or in the future**

As a Field Service Engineer – Early Career, you’ll take on a hands-on role supporting ASM’s advanced semiconductor equipment and helping our customers keep their fabs running at peak performance. You’ll build real-world expertise through structured training, mentorship, and on-the-job learning while working directly with technologies that power AI, 5G, cloud computing, and next‑generation devices. This is your chance to apply your engineering background, strengthen your technical capabilities, and join a team that’s shaping the future of semiconductor innovation.

In this role, based in Hillsboro, OR at our customer site, you’ll launch your engineering career at the center of cutting‑edge semiconductor manufacturing. It’s an ideal opportunity for early‑career engineers who want to put their education into practice in a high‑tech environment where every day brings something new to learn.

From your first day, you’ll receive training through hands‑on guidance from seasoned engineers onsite. You’ll work with vacuum systems, plasma, chemical delivery, robotics, sensors, advanced metrology, and complex hardware‑software interactions. Your contributions will have a direct impact on tool performance, system uptime, and customer success—playing a meaningful role in enabling leading‑edge logic technology nodes. This experience lays a strong foundation for rapid growth, technical mastery, and a variety of long‑term career paths within ASM.

Shifts available:

Shift 4 (7pm-8am)- Sun-Tu and every other Saturday
Shift 6 (7pm-8am)- Wed- Fri and every other Saturday

What You Will Be Working On 

• Support installation, maintenance, and repair of ASM semiconductor equipment at customer sites 
• Troubleshoot equipment and process issues with guidance from senior engineers 
• Deliver clear, timely, customer‑focused support with a strong safety mindset 
• Working in cleanroom environments while following strict safety and quality standards.
• Assist in identifying and contributing to continuous improvement efforts  
• Participate in customer escalations alongside experienced team members 

What We Are Looking For 

• Bachelor’s or master’s degree in Electromechanical Engineering, Electrical Engineering, Mechanical Engineering, or related field 
• Candidates who are hands-on and mechanically curious, energized by complex systems and real-world problem solving, Comfortable working in fast paced, hightech environments & motivated to build a long-term engineering career. 
• Internship, co‑op, senior design project, lab research, or hands‑on technical experience 
• Ability to read and interpret basic electronic and electromechanical schematics 
• Understanding of safety protocols and willingness to work in cleanroom environments 
• Strong problem‑solving mindset and eagerness to learn 
• Clear communication skills and a strong customer-service mindset 
• Ability to work independently and collaboratively 
• Willingness to travel domestically and internationally 
• Proficiency with Microsoft Office 

What Sets You Apart 

• Demonstrated commitment to safety, quality, and disciplined execution 
• Exposure to semiconductor processes, wafer fabs, robotics, vacuum systems, plasma, or gas handling 
• Experience writing technical documentation in school or project settings 
• Familiarity with customer‑facing or support roles (internships, tutoring, help desk, teamwork) 
• Interest in structured problem‑solving methods, statistical methods, data analysis. 
• Curiosity and learning orientation when working with advanced semiconductor technologies 
• Participation in engineering clubs, competitions, or technical student groups 

Why join ASM? 

2026 is the year to join ASM as a Field Service Engineer. Apply now! 

About Johnson Barrow

Johnson Barrow is a leading HVAC manufacturers’ representative in the Pacific Northwest, dedicated to helping people succeed by delivering unbiased consultative services and premium quality mechanical equipment. For over 60 years, we have partnered with engineers, contractors, and building owners to design and implement high-performance building systems that balance energy efficiency, operational reliability, and occupant comfort. Our culture is entrepreneurial at its core — we empower our people to think like business owners, act with urgency, and build lasting relationships. Guided by our values, we stand by every project from concept through completion, advocating for our customers every step of the way.

Job Description: 

As an Outside Sales Engineer, you will be responsible for driving business growth and building strong relationships with customers, contractors, and engineering firms in Central Oregon. Utilizing your HVAC product knowledge and applications expertise, you will identify and develop new business opportunities, manage sales processes, and ensure quality customer support. This position plays a critical role in achieving annual sales targets while contributing to the long-term development of the region’s business. 

Key Responsibilities: 

• Establish and maintain strong relationships with owners, engineers, contractors, and end-users. 

• Identify and develop opportunities with new and existing customers using HVAC product knowledge and applications expertise. 

• Drive annual sales growth and secure long-term business opportunities in the Northwest region. 

• Provide technical expertise on system design, product selection, and specification writing. 

• Prepare detailed sales proposals, estimates, and take-offs tailored to customer needs. 

• Manage projects from the design phase through commissioning, ensuring quality and customer satisfaction. 

• Facilitate smooth communication and workflow between branch office staff, customers, and partners. 

• Process and analyze feasibility assessments and bid documents for potential projects. 

• Maintain and expand your technical product knowledge to better serve customer needs. 

• Deliver high standards of customer support throughout the sales cycle and beyond. 

Education and Experience: 

• Bachelor’s degree in mechanical engineering*   

• Three years of experience direct selling, marketing, or designing HVAC products for mechanical contractors or design engineers. 

• Three years of business development and relationship management within the HVAC industry. 

Skills and Qualifications 

• Three years’ experience in Sales and marketing, with the ability to strategically present HVAC equipment solutions to mechanical contractors and engineers, including mentoring quotations and presenting proposals. 

• Three years’ technical experience in pre-sale and post-sale support for HVAC equipment from over 100 manufacturers. 

• Three years’ experience utilizing customer relationship management skills, including anticipating and meeting customer needs effectively. 

• Three years of experience using organizational and communication skills to manage jobs at various stages of development. 

• Three years’ experience creatively and proactively utilizing problem-solving abilities to address application issues, delivery delays, billing discrepancies, and job site concerns. 

• Five years’ experience and proficiency in Microsoft Windows applications for selection, pricing, quoting, submittals, ordering, expediting, and billing for HVAC projects, as well as effective communication with factories and customers. 

* in lieu of a Bachelor’s degree in mechanical engineering, will accept an additional 2 years of experience as delineated above. 

Pay Range: $100,000 base salary or depending on experience, converting to a commission structure after first year

Total Rewards

At Johnson Barrow, we believe in recognizing and rewarding the contributions of our employees. Our total rewards package is designed to support your financial success, personal well-being, and professional growth, and includes:

· Competitive compensation with bonus opportunities tied to individual and company performance

· Medical, dental, and vision insurance

· Health savings account (HSA) and flexible spending account (FSA) options

· Life and disability insurance

· 401(k) retirement savings plan with company match

· Paid time off (vacation, sick leave, and holidays)

· Employee assistance program (EAP)

· Professional development and training opportunities

· Tuition reimbursement program

· Volunteer time and wellness initiatives

EEO Statement

At Johnson Barrow, we believe our strength comes from the diverse experiences, backgrounds, and perspectives of our people. We are committed to creating a workplace where everyone feels respected, valued, and supported to succeed. We welcome applicants of all races, colors, ancestries, national origins, religions, creeds, ages, sexes, genders, gender identities and expressions, sexual orientations, marital or family statuses, pregnancies, physical or mental disabilities, genetic information, veteran or military statuses, and any other characteristics protected by applicable federal, state, provincial, or local laws. Guided by our core values: Helping People Succeed, Building Partnerships for Life, Relentless Customer Service, and a Sense of Urgency, we strive to ensure every team member can contribute fully and thrive.

As a Field Service Engineer, you’ll bring the technical discipline, precision, and equipment expertise you developed in the military to support ASM’s advanced semiconductor tools and help our customers keep their fabs running at peak performance. You’ll work with the same mindset you relied on in mission‑critical environments—applying your engineering background and real‑world troubleshooting experience to technologies that power AI, 5G, cloud computing, and next‑generation devices. This is a chance to leverage the skills you gained maintaining complex systems in the field and continue building your technical mastery in a rapidly growing, high‑tech industry. 

In this role, you’ll operate at the center of cutting‑edge semiconductor manufacturing. It’s an ideal opportunity for veterans and transitioning service members who have supported sophisticated mechanical, electrical, or electronic systems and want to apply that expertise in a world‑class technology environment where every day brings new challenges to solve. 

From day one, you’ll receive structured training and hands‑on guidance from experienced engineers onsite. You’ll work with vacuum systems, plasma, chemical delivery, robotics, sensors, advanced metrology, and complex hardware‑software interactions—equipment that will feel familiar if you’ve maintained avionics, electronics, propulsion, navigation, comms, radar, robotics, or similar military systems. Your contributions will directly impact tool performance, system uptime, and customer success, forming a strong foundation for long‑term growth and a variety of career paths within ASM. 

Shifts available:

• Shift 4 (6pm-6am)- Sun-Tu and every other Saturday
• Shift 6 (6pm- 6am)- Wed-Fri and every other Saturday

What you will be working on 

• Install, maintain, troubleshoot, and repair ASM semiconductor equipment at customer sites
• Diagnose mechanical, electrical, and process issues in collaboration with senior engineering staff
• Deliver responsive, customer‑focused service with a strong commitment to safety and operational discipline
• Working in cleanroom environments while following strict safety and quality standards
• Assisting, identifying and contributing to continuous improvement efforts 
• Participate in escalations and cross‑functional problem‑solving
• Work on an assigned shift schedule supporting 24/7 manufacturing operations

What we are looking for 

• Bachelor’s or master’s degree in Mechanical Engineering, Electrical Engineering, Electromechanical Engineering, or related field
• Hands-on technical experience maintaining, repairing, or troubleshooting complex mechanical, electrical, or electronic systems
• Proven ability to diagnose complex system faults, follow technical procedures with precision, and maintain equipment in mission‑critical environments 
• Experience working under strict safety protocols, lock‑out/tag‑out procedures, and high‑reliability operational standards
• Comfort working in shift-based environments where readiness, accountability, and teamwork are essential
• Demonstratedability to stay calm under pressure, adapt quickly to changing conditions, and take ownership of equipment performance in demanding situations 
• Ability to read and interpret electronic and electromechanical schematics
• Strong troubleshooting skills and disciplined adherence to safety
• Ability to work in a cleanroom environment
• Clear and effective written and verbal communication
• Ability to work independently and collaboratively
• Willingness to travel domestically and internationally
•  Proficiency with Microsoft Office 

What sets you apart 

• Experience with equipment, gas handling, or high‑precision machinery
• Experience writing or updating technical documentation
• Background in customer‑facing or technical support roles
• Familiarity with structured problem‑solving, data analysis, or statistical methodologies
• Military experience such as Avionics Technician, Electronics Technician, Nuclear Machinist Mate, Satellite/Communications Systems Technician, or similar specialties

Why join ASM?  

With us, you will have strong long‑term growth potential at the forefront of semiconductor technology. Your first role as an FSE is the foundation - not necessarily the finish line. With clear pathways into technical leadership, operations, product roles, program management, technical sales and process engineering, ASM gives you the flexibility to grow in the direction that fits you best in an industry that makes AI possible.  

2026 is the year to join ASM as a Field Service Engineer. Apply now! 

** This position is not eligible for visa sponsorship for external candidates. Candidates cannot require sponsorship now or in the future**

• Bachelor’s degree in Electromechanical Engineering or related field  
• 1–3 years of technical experience in field service, or manufacturing of OEM capital equipment
• Ability to read and interpret electronic and electromechanical schematics
• Basic knowledge of safety protocols and cleanroom guidelines
• Ability to apply rules and procedures in own activities
• Ability to fully understand tool architecture and control algorithms and explain operating principals to peers
• Clear written and verbal communication skills
• Ability to work independently and in a team
• Willing to travel as required for the role domestically and internationally
• Knowledge of safety procedures and cleanroom guidelines
• Proficiency with MS Office

Engineer II, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 4+ years of experience, or a Master’s degree with 0 years of experience
• Experience in field service or semiconductor capital equipment
• Ability to interpret electronic and electromechanical schematics
• Experience with structured troubleshooting methodologies
• Knowledge of cleanroom and semiconductor safety protocols
• Strong communication skills, both written and verbal
• Ability to work independently and within a team
• Willingness to travel domestically and internationally
• Proficiency with MS Office

What sets you apart

Engineer I, Field Service

• Semiconductor field service or capital equipment experience
• Knowledge of wafer fab operations, robotics, vacuum systems, plasma, or gas handling
• Experience writing procedures or process documentation
• Strong customer‑service mindset and organizational skills
• Familiarity with structured problem‑solving methods
• Experience supporting escalations or beta‑site activities

Engineer II, Field Service

• Hands‑on semiconductor field service experience
• Working knowledge of wafer fab operations, robotics, vacuum systems, plasma, RF, or gas handling
• Experience leading structured root‑cause analysis
• Experience providing field data to engineering or design teams
• Background supporting beta‑stage or early‑option tools
• Familiarity with structured problem‑solving techniques
• Strong customer‑service mindset and organizational skills

What we can offer: 

A crafted employee experience designed to foster professional growth, a focus on health & well-being and an internal community that will set you up for success. 

We offer an environment that enables colleagues to demonstrate their capabilities, focus on their work and create value.  At LG, you're encouraged to take a creative and individual approach to challenges with strong emphasis placed on performance and skill—and equal, merit-based opportunities across the board. We want our colleagues to grow with our global business. That's why we deliver sure rewards for exceptional performance and offer industry-leading benefits. Come join the team! 

The Opportunity:

We are currently seeking a Regional Sales Engineer Western US to join our new Process Cooling sales team in the Eco Solutions division!  California, Arizona, Colorado, Oregon, Washington 

The Regional Sales Engineer is key to the success of the chiller and data center business in the United States.  The successful candidate will have strong sales, relationship building, leadership and communication skills at all levels of an organization.  Additionally, the successful Regional Sales Engineer will have a strong strategic grasp of the market and the ability to contribute to go to market strategy.  The Regional Sales Engineer will be expected to provide actionable competitor intelligence and regular performance analysis to sales management.  

• Develop, maintain, and monitor a target list of key data center and/or process cooling customers and work with 3rd party independent reps as appropriate to hit target sales.
• Grow strong relationships as the point of contact for these owner customers and channel partners.
• Build an opportunity pipeline for process cooling; provide monthly forecasts for awards and revenue; and communicate regularly with the director of process cooling.
• Work with marketing and engineering to create compelling sales presentations & proposals highlighting LG’s value proposition and differentiation.
• Personally sell LG cooling technologies including chiller products to both reps and customers. 
• Providing ongoing training and education of reps and customers regarding process cooling technology and LG advantages focusing on chillers.
• Enable required customer support directly or with the help of LG’s customer call center and field support teams.
• Be an internal expert and customer advocate to influence product and process roadmap decisions.

Qualifications:

• Bachelors, Mechanical or Electrical Engineering degree or equivalent related work experience.
• Minimum of 5 years’ experience as a Sales Engineer in the HVAC, process cooling, or data center industry. 
• Knowledge of process cooling equipment design, especially chiller knowledge, is desired.
• Ability to travel throughout the U.S.
• Willingness to pursue and attend additional training related to performance of job.
• Motivated and Self-Starter, able to work independently from remote locations.
• Strong understanding of project specifications and blueprints.
• Dynamic personality with great leadership, management, sales and communication skills.

#LI-GJ1