We are seeking a motivated and mechanically inclined Waste / Ultra-Pure Water (UPW) Operations & Maintenance Technician Intern to support the operation and maintenance of critical water and wastewater systems within a semiconductor or mission-critical facility.

This role provides hands-on experience with advanced UPW generation, distribution, and wastewater treatment systems, while working alongside experienced technicians and engineers in a highly regulated, safety-focused environment.

Responsibilities:

• Support daily operations of UPW generation and distribution systems, including reverse osmosis (RO), electrodeionization (EDI), ion exchange, degasification, UV oxidation, and sub-micron filtration systems under supervision.
• Assist in operating and monitoring wastewater treatment systems, including neutralization systems, pH adjustment, chemical dosing, lift stations, equalization tanks, and biological processes (e.g., MBR/BNR where applicable).
• Perform routine rounds and system readings; record key parameters such as conductivity, resistivity, TOC, pH, flow rates, pressures, and tank levels, and escalate abnormal conditions.
• Assist with preventive and corrective maintenance on mechanical equipment including pumps, valves, filters, membranes, mixers, blowers, and chemical delivery systems.
• Support water quality monitoring and sampling activities to ensure compliance with process requirements and environmental discharge permits.
• Assist with chemical handling and dosing operations (acids, caustics, and treatment chemicals) in accordance with site safety procedures and SDS requirements.
• Support system flushing, regeneration, and sanitization of UPW systems, including resin beds, RO skids, and distribution loops.
• Assist in troubleshooting system issues such as membrane fouling, scaling, flow restrictions, pump failures, and instrumentation inaccuracies.
• Learn and apply safety procedures including lockout/tagout (LOTO), hazardous chemical handling, and confined space entry.
• Support startup and shutdown activities for UPW and wastewater systems, ensuring controlled and compliant operation.
• Assist in maintaining accurate CMMS documentation (e.g., Maximo), including work orders, calibration records, and maintenance logs.
• Observe and support vendor activities such as membrane cleaning, media replacement, and system performance testing.
• Participate in Environmental Health & Safety (EHS) programs, audits, and continuous improvement initiatives focused on safety, compliance, and water conservation.
• Develop an understanding of semiconductor water quality standards, contamination risks, and the critical nature of UPW systems for manufacturing operations.
• Any other duties or responsibilities that may be assigned to you in your role. 

Skills Required:

• Exposure to semiconductor, data center, pharmaceutical, or other mission-critical environments
• Basic knowledge of water/wastewater treatment processes (not required)
• Familiarity with CMMS systems (e.g., Maximo) is a plus
• Enrollment in or recent completion of a technical program (mechanical, environmental, or related field)
• Mechanically inclined with a strong interest in hands-on technical work
• Basic understanding of mechanical systems (pumps, piping, valves, etc.)
• Willingness to learn and work in a fast-paced, mission-critical environment
• Strong attention to detail and commitment to safety

Education / Licenses / Certifications

• High school diploma or equivalent
• Proof of education, licenses, and certifications will be required where applicable.

#LI-DNP

MongoDB is building a world-class team in North America to create tooling that helps customers modernize their applications and migrate their data from legacy relational databases to MongoDB in real-time. As companies modernise legacy workloads and data ecosystems, they are increasingly drawn to the flexibility and scalability of the document model. The tools developed by the Code Generation and Data Migration team are critical in this journey, helping customers with schema modeling, code generation, initial data loads, and continuous data synchronization.

We're looking for a Senior Engineer with a strong background in computer science fundamentals, systems design, experience in the Java ecosystem, streaming systems, and data-intensive applications to join our engineering team. In this role, you will be instrumental in designing, building, and optimizing the underlying data structures, algorithms, and database interactions that power our generative AI platform, code generation and migration tools. This involves crafting sophisticated orchestration layers, robust integration points, and high-performance data systems that seamlessly connect and leverage advanced AI capabilities for code generation and  building a sophisticated data migration suite using a modern technology stack, which includes Java, Spring Boot, Kafka, Debezium, and React.You will work on critical components that ensure the scalability, efficiency, and reliability of our services, collaborating closely with AI researchers, product management and other engineers to design and implement cutting-edge products that solve complex customer challenges.

This role will be based out of North America in the PST and MST zones only.

The ideal candidate for this role will have

• 2+ years of  engineering experience in backend systems, distributed systems, or core platform development
• Experience in one or several of Java, Rust, C/C++, and/or Python, with a strong understanding of systems-level programming, memory management, and performance tuning
• Experience with streaming data platforms such as Apache Kafka and Change Data Capture (CDC) tools like Debezium
• Experience with relational data modeling and hands-on experience with at least one SQL database (Postgres, MySQL, etc)
• Exposure to client-side technologies such as JavaScript and React is a plus
• Good understanding of algorithms, data structures and their time and space complexity
• Curiosity, a positive attitude, and a drive to continue learning
• Excellent verbal and written communication skills

Nice to Have

• Familiarity with cloud-native distributed systems (e.g., Kubernetes)
• Experience with NoSQL databases and understanding of their trade-offs is great, but not required. We'll teach you NoSQL
• Contributions to relevant open-source projects

Position Expectations

• Contribute high-quality, well-tested backend code to the data migration engine and core components of our generative AI orchestration platform
• Collaborate effectively with Product Management, AI researchers and machine learning engineers and designers to build and deliver on the product roadmap
• Work to develop robust and efficient backend services that orchestrate AI functionalities
• Identify and address performance bottlenecks and architectural challenges in our systems, particularly within data flow and orchestration
• Participate actively in code reviews to enforce best practices and patterns
• Help troubleshoot and resolve complex technical issues in our distributed systems
• Give and solicit feedback on technical design documents and pull requests
• Perform tasks related to process such as CI/CD, quality, testing, etc 

Success Measures

Within the first three months, you will have:

• Familiarize yourself with the MongoDB database and aggregation language
• Familiarize yourself with the backend tech stack including Java, Spring Boot, and Kafka
• Set up software development infrastructure (tech stack, build tools, etc) to enable development using the relevant tech stacks
• Started collaborating with your peers and contributed to code reviews

Within six months, you will have:

• Familiarised yourself with the rest of our the application modernization tool stack
• Delivered at least one large scale feature that spans the entire tech stack
• Reviewed and contributed to scope and technical design documents

Within 12 months, you will have:

• Become a key contributor to our backend stack, capable of taking on complex features independently
• Helped recruit and interview new members of the team
• Collaborated effectively with other teams at MongoDB on cross-functional projects

About MongoDB

MongoDB is built for change, empowering our customers and our people to innovate at the speed of the market. We have redefined the database for the AI era, enabling innovators to create, transform, and disrupt industries with software. MongoDB’s unified database platform—the most widely available, globally distributed database on the market—helps organizations modernize legacy workloads, embrace innovation, and unleash AI. Our cloud-native platform, MongoDB Atlas, is the only globally distributed, multi-cloud database and is available across AWS, Google Cloud, and Microsoft Azure.

With offices worldwide and nearly 60,000 customers—including 75% of the Fortune 100 and AI-native startups—relying on MongoDB for their most important applications, we’re powering the next era of software.

Our compass at MongoDB is our Leadership Commitment, guiding how and why we make decisions, show up for each other, and win. It’s what makes us MongoDB. 

To drive the personal growth and business impact of our employees, we’re committed to developing a supportive and enriching culture for everyone. From employee affinity groups, to fertility assistance and a generous parental leave policy, we value our employees’ wellbeing and want to support them along every step of their professional and personal journeys. Learn more about what it’s like to work at MongoDB, and help us make an impact on the world!

MongoDB is committed to providing any necessary accommodations for individuals with disabilities within our application and interview process. To request an accommodation due to a disability, please inform your recruiter.

MongoDB, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type and makes all hiring decisions without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

REQ ID: 425547

At Talkspace, we are committed to fostering a diverse, equitable, inclusive, and belonging-centered workplace where everyone can thrive while making a difference in mental health. Want to help over two million people receive quality mental healthcare? Come join our mission to get therapy into the hands of everyone!

We’re looking for a part-time, contract Therapist (Independent Contract Provider) who is passionate about reaching individuals who need mental healthcare but lack easy access to it. This role is perfect for those seeking the opportunity to work with a diverse client base while enjoying the flexibility and rewards of private practice—without the hassle of administrative work. Let Talkspace handle the insurance billing, marketing, and administrative costs, so you can create your own schedule and focus fully on providing impactful care!

What you'll do:

• Treat clients remotely in your state(s) of licensure on the secure (HIPAA compliant) Talkspace platform
• Conduct client sessions using video, audio, and live messaging services
• Respond to asynchronous client messages each week, in a timely manner
• Complete your required clinical documentation after each client session

About you

• Current license to practice independently without supervision in the state of New Mexico
  • Licensed Clinical Social Worker (LCSW)
  • Licensed Marriage and Family Therapist (LMFT)
  • Licensed Professional Clinical Counselor (LPCC)
• Individual professional malpractice liability insurance policy
• Individual NPI number
• Comfortable learning new online tools and technology 
• Reliable internet connection and video-capable device

Perks

• Clients Ready for You: Talkspace provides new client referrals
• Flexible Schedule: Set your own schedule with no minimum requirement for your weekly hours or caseload size
• No Membership Fees: No provider fees
• Accept Insurance Without Hassle: Talkspace will take care of all aspects of client insurance including credentialing, billing, and claims
• Everything in One Place: Sessions, clinical documentation, resources, and compensation tracking on one platform
• Fully Paid Training: Master the Talkspace platform before your first session
• Clinical Support: Provider Support and IT teams available for any technical or platform related questions
• Free CEUs: NBCC and ASWB accredited continuing education credits via Talkspace-provided Learning Communities
• Health Perks: Access Stride Health to support your health and financial well-being

Compensation

• $70 per hour for live chat, audio, or video sessions (this rate is prorated for 45 and 30 minute sessions)
• Additional compensation for asynchronous messaging
• Earn a new client engagement bonus, varying by plan type

Please note: If you treat clients in multiple states, different rates will apply accordingly. Rates could be subject to change and may vary over time based on the market and shifts in demand.

Why Talkspace

Talkspace is a leading virtual behavioral healthcare provider committed to helping people lead healthier, happier lives through access to high-quality mental healthcare. At Talkspace, we believe that mental healthcare is core to overall health and should be available to everyone. 

Talkspace pioneered the ability to text with a licensed therapist from anywhere and now offers a comprehensive suite of mental health services, including therapy for individuals, teens, and couples, as well as psychiatric treatment and medication management (18+). With Talkspace’s core therapy offerings, members are matched with one of thousands of licensed therapists within days and can engage in live video, audio, or chat sessions, and/or unlimited asynchronous text messaging sessions. 

All care offered at Talkspace is delivered through an easy-to-use, fully-encrypted web and mobile platform that meets HIPAA, federal, and state regulatory requirements. More than 151 million Americans have access to Talkspace through their health insurance plans, employee assistance programs, our partnerships with leading healthcare companies, or as a free benefit through their employer, school, or government agency.

EQUAL OPPORTUNITY EMPLOYER

Talkspace welcomes and celebrates talent from all backgrounds, perspectives, and walks of life to foster an innovative and diverse workforce. We encourage you to apply, even if you don’t meet every qualification or if your path has been nontraditional — such as not completing a formal degree program, taking a career break, or having a prior criminal record — if you believe you could make a great addition to this team. Come as you are and learn about the exciting opportunities on our team.

Individuals seeking employment at Talkspace are considered without regard to race, color, religious creed, sex, national origin, citizenship status, age, physical or mental disability, sexual orientation, marital, parental, veteran or military status, unfavorable military discharge, or any other status protected by applicable federal, state or local law.

How do we define Diversity, Equity, Inclusion, and Belonging at Talkspace? 

Diversity

Diversity encompasses the unique attributes of our employees as individuals. We value and embrace the richness arising from their varied backgrounds, perspectives, and experiences, which include, but are not limited to, age, ability, ethnicity, gender, race, and cultural background.

Equity

Equity refers to a fair and impartial workplace, aiming to ensure equal growth and advancement opportunities for all employees. This involves amplifying underrepresented voices, addressing unconscious biases, and providing inclusive, culturally competent mental health care.

Inclusion

Inclusion signifies the practice of granting equal access to opportunities and resources for all employees, particularly those who might otherwise be excluded or marginalized. It ensures that everyone feels a sense of belonging, value, support, and respect as an individual.

Belonging

Belonging reflects the affinity and positive relationships that develop among employees from diverse backgrounds when businesses actively promote diversity, equity, and inclusion in the workplace.

This role is responsible for leading frontline Sales Development Representatives (SDRs) to deliver consistent, high-quality Sales Accepted Lead (SAL) production aligned to pipeline creation targets. The role drives daily execution, coaching effectiveness, pipeline hygiene, and short-range forecast accuracy through hands-on leadership and disciplined inspection.

Essential Duties & Responsibilities:

• Lead and develop a team of Sales Development Representatives accountable for SAL production, activity standards, and qualification quality within assigned segments or territories.
• Own team SAL attainment and short-range forecasting, ensuring accuracy, transparency, and alignment to defined pipeline creation targets.
• Provide ongoing coaching and skill development to SDRs, including call reviews, messaging refinement, objection handling, qualification standards, and effective opportunity handoff practices.
• Drive disciplined daily inspection of activity metrics, SAL quality, conversion indicators, and data integrity to ensure consistent execution and performance visibility.
• Maintain pipeline hygiene by ensuring leads are worked, dispositioned, documented, and routed accurately within customer relationship management and sales engagement systems.
• Enforce adherence to established qualification criteria, engagement cadences, and service-level expectations to ensure SAL readiness and downstream Sales acceptance.
• Partner with Marketing and Revenue Operations to provide feedback on lead quality, routing effectiveness, campaign outcomes, and process improvements impacting funnel performance.
• Support workforce planning activities such as hiring participation, onboarding support, ramp management, and performance management to sustain productivity and coverage standards.
• Identify performance risks or gaps in SAL production and implement corrective actions through targeted coaching, activity adjustments, or process reinforcement.
• Promote a culture of accountability, data accuracy, responsiveness, and continuous improvement within the Sales Development team.
• Perform other duties and responsibilities as required to support business needs.
• Job Level Competencies Manages experienced, professional employees and/or supervisors; and/or manages large, complex technical and/or business support teams.
• Accountable for the performance and results of a team and/or department. Interprets and administers policies, processes and procedures that affect direct reports and the workflow of the team/department.
• Adapts departmental plans and priorities to address resource and operational challenges. Contributes to budget development and performance standards of department and direct reports. Assignments are defined in the form of objectives.
• Decisions are guided by policies, procedures, business plans and independent judgment.
• Collaborates with team(s), customers/ clients, functional peer group managers and occasionally senior management.
• Participates and presents at meetings with internal and external representatives.
• Decisions may have an impact on work processes and outcomes.
• Erroneous decisions or recommendations may result in serious delays and considerable expenditure of additional time, people and/or financial resources. 

Qualifications:

• Typical experience: 8+ years in related role or experience including 2+ years in management.
• Actual experience may vary depending on role complexity, geography, and internal development opportunities or a comparable mix of training, education, and experience.
• Demonstrated experience leading Sales Development or comparable frontline pipeline-generation teams in a performance-driven environment.
• Proven ability to coach individual contributors to measurable productivity and qualification standards.
• Strong understanding of sales development metrics, including SAL attainment, conversion rates, activity productivity, and pipeline contribution.
• Experience managing shortrange forecasting

This role is responsible for leading frontline Sales Development Representatives (SDRs) to deliver consistent, high-quality Sales Accepted Lead (SAL) production aligned to pipeline creation targets. The role drives daily execution, coaching effectiveness, pipeline hygiene, and short-range forecast accuracy through hands-on leadership and disciplined inspection.

Essential Duties & Responsibilities:

• Lead and develop a team of Sales Development Representatives accountable for SAL production, activity standards, and qualification quality within assigned segments or territories.
• Own team SAL attainment and short-range forecasting, ensuring accuracy, transparency, and alignment to defined pipeline creation targets.
• Provide ongoing coaching and skill development to SDRs, including call reviews, messaging refinement, objection handling, qualification standards, and effective opportunity handoff practices.
• Drive disciplined daily inspection of activity metrics, SAL quality, conversion indicators, and data integrity to ensure consistent execution and performance visibility.
• Maintain pipeline hygiene by ensuring leads are worked, dispositioned, documented, and routed accurately within customer relationship management and sales engagement systems.
• Enforce adherence to established qualification criteria, engagement cadences, and service-level expectations to ensure SAL readiness and downstream Sales acceptance.
• Partner with Marketing and Revenue Operations to provide feedback on lead quality, routing effectiveness, campaign outcomes, and process improvements impacting funnel performance.
• Support workforce planning activities such as hiring participation, onboarding support, ramp management, and performance management to sustain productivity and coverage standards.
• Identify performance risks or gaps in SAL production and implement corrective actions through targeted coaching, activity adjustments, or process reinforcement.
• Promote a culture of accountability, data accuracy, responsiveness, and continuous improvement within the Sales Development team.
• Perform other duties and responsibilities as required to support business needs.
• Job Level Competencies Manages experienced, professional employees and/or supervisors; and/or manages large, complex technical and/or business support teams.
• Accountable for the performance and results of a team and/or department. Interprets and administers policies, processes and procedures that affect direct reports and the workflow of the team/department.
• Adapts departmental plans and priorities to address resource and operational challenges. Contributes to budget development and performance standards of department and direct reports. Assignments are defined in the form of objectives.
• Decisions are guided by policies, procedures, business plans and independent judgment.
• Collaborates with team(s), customers/ clients, functional peer group managers and occasionally senior management.
• Participates and presents at meetings with internal and external representatives.
• Decisions may have an impact on work processes and outcomes.
• Erroneous decisions or recommendations may result in serious delays and considerable expenditure of additional time, people and/or financial resources. 

Qualifications:

• Typical experience: 8+ years in related role or experience including 2+ years in management.
• Actual experience may vary depending on role complexity, geography, and internal development opportunities or a comparable mix of training, education, and experience.
• Demonstrated experience leading Sales Development or comparable frontline pipeline-generation teams in a performance-driven environment.
• Proven ability to coach individual contributors to measurable productivity and qualification standards.
• Strong understanding of sales development metrics, including SAL attainment, conversion rates, activity productivity, and pipeline contribution.
• Experience managing shortrange forecasting

This role is responsible for owning net-new customer acquisition within Enterprise and Government segments by leading complex, multi-stakeholder pursuits and delivering significant new annual recurring revenue (ARR). This role drives strategic revenue growth through advanced qualification rigor, executive-level engagement, and disciplined execution across extended sales cycles.

What you'll do:

• Own and deliver net-new ARR quota within Enterprise segments.
• Develop and execute strategic account plans to convert high-value prospects into new customers.
• Lead complex discovery across executive, procurement, security, and technical stakeholders.
• Navigate regulatory, compliance, and procurement processes associated with Enterprise and Government buyers.
• Build and defend business cases aligned to measurable customer outcomes.
• Manage extended sales cycles with high average selling prices.
• Maintain strong forecast accuracy and opportunity inspection discipline.
• Partner cross-functionally to mitigate technical and commercial risk in high-impact deals.
• Transition new customers to post-sale teams following contract execution.
• Perform other duties and responsibilities as required to support business needs.

What you'll bring:

• 8-10 years of experience in sales
  • Actual experience may vary depending on role complexity, geography, and internal development opportunities or a comparable mix of training, education, and experience.
• Significant experience in Enterprise or complex B2B sales with quota responsibility.
• Demonstrated ability to close large, multi-stakeholder deals.
• Strong executive presence and strategic selling capability.
• Experience navigating procurement, compliance, or regulated buying environments.

Preferred Qualifications:

• Experience selling into Government or highly regulated industries.
• Experience managing long-cycle, high-value transactions.
• Advanced training in structured sales methodologies.

The OTE range for this role is $200,000 - $250,000 and will vary based on a wide range of factors including location, experience, qualifications and team.

This role is responsible for owning net-new customer acquisition within Enterprise and Government segments by leading complex, multi-stakeholder pursuits and delivering significant new annual recurring revenue (ARR). This role drives strategic revenue growth through advanced qualification rigor, executive-level engagement, and disciplined execution across extended sales cycles.

What you'll do:

• Own and deliver net-new ARR quota within Enterprise segments.
• Develop and execute strategic account plans to convert high-value prospects into new customers.
• Lead complex discovery across executive, procurement, security, and technical stakeholders.
• Navigate regulatory, compliance, and procurement processes associated with Enterprise and Government buyers.
• Build and defend business cases aligned to measurable customer outcomes.
• Manage extended sales cycles with high average selling prices.
• Maintain strong forecast accuracy and opportunity inspection discipline.
• Partner cross-functionally to mitigate technical and commercial risk in high-impact deals.
• Transition new customers to post-sale teams following contract execution.
• Perform other duties and responsibilities as required to support business needs.

What you'll bring:

• 8-10 years of experience in sales
  • Actual experience may vary depending on role complexity, geography, and internal development opportunities or a comparable mix of training, education, and experience.
• Significant experience in Enterprise or complex B2B sales with quota responsibility.
• Demonstrated ability to close large, multi-stakeholder deals.
• Strong executive presence and strategic selling capability.
• Experience navigating procurement, compliance, or regulated buying environments.

Preferred Qualifications:

• Experience selling into Government or highly regulated industries.
• Experience managing long-cycle, high-value transactions.
• Advanced training in structured sales methodologies.

The OTE range for this role is $200,000 - $250,000 and will vary based on a wide range of factors including location, experience, qualifications and team.

This role is responsible for owning net-new customer acquisition within Enterprise and Government segments by leading complex, multi-stakeholder pursuits and delivering significant new annual recurring revenue (ARR). This role drives strategic revenue growth through advanced qualification rigor, executive-level engagement, and disciplined execution across extended sales cycles.

What you'll do:

• Own and deliver net-new ARR quota within Enterprise segments.
• Develop and execute strategic account plans to convert high-value prospects into new customers.
• Lead complex discovery across executive, procurement, security, and technical stakeholders.
• Navigate regulatory, compliance, and procurement processes associated with Enterprise and Government buyers.
• Build and defend business cases aligned to measurable customer outcomes.
• Manage extended sales cycles with high average selling prices.
• Maintain strong forecast accuracy and opportunity inspection discipline.
• Partner cross-functionally to mitigate technical and commercial risk in high-impact deals.
• Transition new customers to post-sale teams following contract execution.
• Perform other duties and responsibilities as required to support business needs.

What you'll bring:

• 8-10 years of experience in sales
  • Actual experience may vary depending on role complexity, geography, and internal development opportunities or a comparable mix of training, education, and experience.
• Significant experience in Enterprise or complex B2B sales with quota responsibility.
• Demonstrated ability to close large, multi-stakeholder deals.
• Strong executive presence and strategic selling capability.
• Experience navigating procurement, compliance, or regulated buying environments.

Preferred Qualifications:

• Experience selling into Government or highly regulated industries.
• Experience managing long-cycle, high-value transactions.
• Advanced training in structured sales methodologies.

The OTE range for this role is $200,000 - $250,000 and will vary based on a wide range of factors including location, experience, qualifications and team.

This role is responsible for owning net-new customer acquisition within Enterprise and Government segments by leading complex, multi-stakeholder pursuits and delivering significant new annual recurring revenue (ARR). This role drives strategic revenue growth through advanced qualification rigor, executive-level engagement, and disciplined execution across extended sales cycles.

What you'll do:

• Own and deliver net-new ARR quota within Enterprise segments.
• Develop and execute strategic account plans to convert high-value prospects into new customers.
• Lead complex discovery across executive, procurement, security, and technical stakeholders.
• Navigate regulatory, compliance, and procurement processes associated with Enterprise and Government buyers.
• Build and defend business cases aligned to measurable customer outcomes.
• Manage extended sales cycles with high average selling prices.
• Maintain strong forecast accuracy and opportunity inspection discipline.
• Partner cross-functionally to mitigate technical and commercial risk in high-impact deals.
• Transition new customers to post-sale teams following contract execution.
• Perform other duties and responsibilities as required to support business needs.

What you'll bring:

• 8-10 years of experience in sales
  • Actual experience may vary depending on role complexity, geography, and internal development opportunities or a comparable mix of training, education, and experience.
• Significant experience in Enterprise or complex B2B sales with quota responsibility.
• Demonstrated ability to close large, multi-stakeholder deals.
• Strong executive presence and strategic selling capability.
• Experience navigating procurement, compliance, or regulated buying environments.

Preferred Qualifications:

• Experience selling into Government or highly regulated industries.
• Experience managing long-cycle, high-value transactions.
• Advanced training in structured sales methodologies.

The OTE range for this role is $200,000 - $250,000 and will vary based on a wide range of factors including location, experience, qualifications and team.

This role is responsible for owning net-new customer acquisition within Enterprise and Government segments by leading complex, multi-stakeholder pursuits and delivering significant new annual recurring revenue (ARR). This role drives strategic revenue growth through advanced qualification rigor, executive-level engagement, and disciplined execution across extended sales cycles.

What you'll do:

• Own and deliver net-new ARR quota within Enterprise segments.
• Develop and execute strategic account plans to convert high-value prospects into new customers.
• Lead complex discovery across executive, procurement, security, and technical stakeholders.
• Navigate regulatory, compliance, and procurement processes associated with Enterprise and Government buyers.
• Build and defend business cases aligned to measurable customer outcomes.
• Manage extended sales cycles with high average selling prices.
• Maintain strong forecast accuracy and opportunity inspection discipline.
• Partner cross-functionally to mitigate technical and commercial risk in high-impact deals.
• Transition new customers to post-sale teams following contract execution.
• Perform other duties and responsibilities as required to support business needs.

What you'll bring:

• 8-10 years of experience in sales
  • Actual experience may vary depending on role complexity, geography, and internal development opportunities or a comparable mix of training, education, and experience.
• Significant experience in Enterprise or complex B2B sales with quota responsibility.
• Demonstrated ability to close large, multi-stakeholder deals.
• Strong executive presence and strategic selling capability.
• Experience navigating procurement, compliance, or regulated buying environments.

Preferred Qualifications:

• Experience selling into Government or highly regulated industries.
• Experience managing long-cycle, high-value transactions.
• Advanced training in structured sales methodologies.

The OTE range for this role is $200,000 - $250,000 and will vary based on a wide range of factors including location, experience, qualifications and team.

THE ROLE

Everpure is looking for a Territory Account Executive. In this role, you will be selling remotely into a territory in Everpure's Western region with a focus on mid-market accounts in San Diego, Arizona, and New Mexico. 

WHAT YOU'LL DO

• Directly sell through an inside, direct marketing environment to deliver sales targets and consistently achieve quota
• Drive account strategies and coordinate team selling efforts with partners to close business on a quarterly and annual basis
• Develop channel relationships that will bring the sales and technical resources to each opportunity and lead to closed deals
• Prospect into and penetrate new accounts, reaching decision-makers and closing business
• Develop and present proposals to prospective customers with information that demonstrates the ability of the Everpure solution to meet customers’ business objectives and justify the sale
• Manage pipeline with a keen focus on conversion success and delivering an accurate forecast 

WHAT YOU BRING

• Consistent track record of exceeding quota and driving referenceable business in a B2B technology sales environment 
• Experience working in or understanding sales channel selling models
• A desire to work the bookends of the sale, from prospecting to closing, with a demonstrated achievement in winning net new logos 
• Recognized achievement in building business relationships, solving complex problems for customers, and building a book of business 
• Completion of business value selling (BVS) training or other relevant B2B sales training systems
• A desire to drive change and evangelize new technologies

OVERVIEW

The Sales & Service Lead is integral to the elevating the guest experience at ALO.  They will ensure we deliver our targets for engagement, guest education and interaction, create a service-lead environment on the sales floor, and ultimately create a sanctuary that sets ALO apart from other retailers. 

RESPONSIBILITIES

Sales & Service Leader 

• Lead an exceptional guest experience on the floor through assessing the level of guest connection and technical product education and supporting team members to address gaps through feedback and coaching 
• Continue to build the client relationship daily with our customers 
• Analyze reports in order to strategize and deliver results; support implementing action plans focusing on deficient areas and highlight growth opportunities 
• Ensure effective sales floor coverage through the development of workforce solutions and leading selling initiatives throughout the store as needed. 

Business Leader  

• Partner with Operations & Visual Manager to manage reporting, budgets, expenses, inventory control, supplies, vendor relationships, technology, and facilities to ensure maintained and maximized 
• Demonstrate strong business acumen by leveraging metrics to support business-driving strategies 
• Move dynamically on the retail floor to assess and fulfill the needs of the business, team and guests 

People Leader 

• Leads by example and inspires staff in daily operations and guest experience. 
• Directly oversee the Sales & Service Associates and Cashiers; responsible for recruitment and development of talent 
• Use company performance tools to evaluate each operations associate and provide constant feedback to drive individual growth and improvement in partnership with the store leader 

Business Partner  

• Collaborate with Community & Studio, Operations and Visual Leads to ensure cross-functional training and to ensure the business is well-executed 
• Execute company-level operations-focused directives, projects and initiates, in partnership with the Sales & Service Manager (e.g. from the SCC) 

QUALIFICATIONS: 

• 2+ Years prior work experience in a client-centric, sales environment 
• Proven leadership capabilities demonstrating excellent decision making 
• Values feedback, receptive to receiving feedback and eager to provide 
• High energy, upbeat and enthusiastic with the ability to integrate fun and work 
• Self-motivated with a desire to achieve results and excel individually, and as a team 
• Excellent interpersonal and written communication skills 
• Aligns with and embodies ALO’s Guiding Principles 
• Job Level: Associate

The Sales & Service Lead is full-time and requires 32-40 hours per week fulfilling the job description as stated above. To build a balanced schedule that supports the needs of the business and our teams, we expect all full-time employees to have open availability and are expected to work variable shifts including peak days and weekends. All employees without exception are expected to be able to work during the company’s Blackout period, from the week of American Thanksgiving (including Black Friday and Thanksgiving weekend) through the end of the holiday season (the 1st week of January). 

JUST SOME OF THE PERKS 

• Generous employee discount for ALO, and free membership to ALO Wellness Club, with access to hundreds of streaming fitness and yoga classes with top instructors
• Competitive medical, dental and vision plan options, and enhanced additional benefits such as free virtual access to mental health providers and new parent support for employees and dependents (Full-Time Employees)
• 401K with company matching (Full-Time Employees)
• Monthly Store Incentives
• Clothing Allowance
• Free yoga classes at any of our Sanctuaries (select cities)

#LI-JJ1

#LI-3

#li-onsite

OVERVIEW

The Sales & Service Lead is integral to the elevating the guest experience at ALO.  They will ensure we deliver our targets for engagement, guest education and interaction, create a service-lead environment on the sales floor, and ultimately create a sanctuary that sets ALO apart from other retailers. 

RESPONSIBILITIES

Sales & Service Leader 

• Lead an exceptional guest experience on the floor through assessing the level of guest connection and technical product education and supporting team members to address gaps through feedback and coaching 
• Continue to build the client relationship daily with our customers 
• Analyze reports in order to strategize and deliver results; support implementing action plans focusing on deficient areas and highlight growth opportunities 
• Ensure effective sales floor coverage through the development of workforce solutions and leading selling initiatives throughout the store as needed. 

Business Leader  

• Partner with Operations & Visual Manager to manage reporting, budgets, expenses, inventory control, supplies, vendor relationships, technology, and facilities to ensure maintained and maximized 
• Demonstrate strong business acumen by leveraging metrics to support business-driving strategies 
• Move dynamically on the retail floor to assess and fulfill the needs of the business, team and guests 

People Leader 

• Leads by example and inspires staff in daily operations and guest experience. 
• Directly oversee the Sales & Service Associates and Cashiers; responsible for recruitment and development of talent 
• Use company performance tools to evaluate each operations associate and provide constant feedback to drive individual growth and improvement in partnership with the store leader 

Business Partner  

• Collaborate with Community & Studio, Operations and Visual Leads to ensure cross-functional training and to ensure the business is well-executed 
• Execute company-level operations-focused directives, projects and initiates, in partnership with the Sales & Service Manager (e.g. from the SCC) 

QUALIFICATIONS: 

• 2+ Years prior work experience in a client-centric, sales environment 
• Proven leadership capabilities demonstrating excellent decision making 
• Values feedback, receptive to receiving feedback and eager to provide 
• High energy, upbeat and enthusiastic with the ability to integrate fun and work 
• Self-motivated with a desire to achieve results and excel individually, and as a team 
• Excellent interpersonal and written communication skills 
• Aligns with and embodies ALO’s Guiding Principles 
• Job Level: Associate

The Sales & Service Lead is full-time and requires 32-40 hours per week fulfilling the job description as stated above. To build a balanced schedule that supports the needs of the business and our teams, we expect all full-time employees to have open availability and are expected to work variable shifts including peak days and weekends. All employees without exception are expected to be able to work during the company’s Blackout period, from the week of American Thanksgiving (including Black Friday and Thanksgiving weekend) through the end of the holiday season (the 1st week of January). 

JUST SOME OF THE PERKS 

• Generous employee discount for ALO, and free membership to ALO Wellness Club, with access to hundreds of streaming fitness and yoga classes with top instructors
• Competitive medical, dental and vision plan options, and enhanced additional benefits such as free virtual access to mental health providers and new parent support for employees and dependents (Full-Time Employees)
• 401K with company matching (Full-Time Employees)
• Monthly Store Incentives
• Clothing Allowance
• Free yoga classes at any of our Sanctuaries (select cities)

#LI-JJ1

#LI-3

#li-onsite

We are seeking an experienced Operations Support Specialist to join our team.

Key Responsibilities:

• Manages daily tasks required to perform ongoing support of design, construction, startup and/or operations/ maintenance activities of complex high hazard systems or projects.
• Renders expert opinions towards Radiation Protection and technical issues, provides recommendations to project design, work control, and construction teams in specific areas of expertise.
• Provides independent reviews and assessments in areas of specialized expertise and provides guidance to project teams in delivering results on projects of complex, high- technology nature.
• Interfaces with management personnel and customer representatives. Develops and enforces work standards, assigns schedules, reviews work quality, communicates goals, objectives, and policies of the organization to subordinates.
• Provides leadership for the project team, coordinates with the functional organizations, and supervises senior personnel within the project organization. US Nuclear Navy experience, DOE Plutonium facility experience, and strong conduct of operations knowledge highly desired.

Minimum Requirements:

• Bachelor’s degree in engineering or science or an equivalent combination of education and experience directly related to Radiation Protection.
• Requires eight (8) years of relevant experience, five (5 years) of directly applicable experience in Radiation Protection and/or work planning in a DOE Cat 2 nuclear facility.

Clearance:
Preferred DOE-Q Clearance

The above statements are intended to describe the general nature and level of work being performed by the individual(s) assigned to this position. They are not intended to be an exhaustive list of all duties, responsibilities, and skills required. Cybermedia Technologies management reserves the right to modify, add, or remove duties and to assign other duties as necessary. In addition, where applicable and available, reasonable accommodation(s) may be made to enable individuals with disabilities to perform essential functions of this position.
Please note: Candidate(s) will be required to go through pre-employment screening.
Cybermedia Technologies, Inc. is a proud Equal Opportunity Employer! (EOE; M/F/D/V)

Customer Experience Solutions Specialist | Hawthorne Residential Partners 

Location: Remote  

Customer Experience Solutions Specialist | Position Summary  

The Customer Experience Solutions Specialist (CX Solutions Specialist) plays a key role in shaping and executing the strategy for our core front-of-house technology platforms and CX programs. This position enhances the resident experience and improves operational efficiency across our communities. Leveraging expertise in multifamily technology, data-driven insights, and technical acumen, this role optimizes customer-facing platforms to deliver a superior, people-first resident journey. Additionally, this role helps shape Hawthorne’s voice of customer programs, CRM, survey strategies, and reputation management platforms. 
 

Customer Experience Solutions Specialist |  Job Functions 

Product Strategy 
 

• Develop and optimize Hawthorne’s key technology platforms to enhance customer experience and operational efficiency. 

• Drive product enhancements by prioritizing business needs and staying up to date with the most current product updates and features.  

• Own the product roadmap for CX platforms, including prioritization, timelines, and feature rollout 

• Translate operational and customer needs into clear product requirements and enhancements 

• Identify opportunities to streamline workflows and improve system adoption across teams 

Customer Insights 

• Manage survey and reputation strategies and platforms to generate actionable CX insights. 
• Drive the collection, analysis, and sharing of customer insights to shape strategy and product development. 

• Monitor trends across feedback channels to proactively identify system gaps or friction points 

• Partner with teams to turn insights into actionable improvements within CX platforms 

Technical Expertise 

• Serve as the primary subject matter expert for CX platforms (Knock, RentCafe, etc.) 

• Develop a deep understanding of our customer-facing platforms and technology ecosystem to ensure a holistic approach to customer experience. 

• Oversee system configuration, setup, and ongoing optimization 

• Troubleshoot, analyze and develop CX platforms to ensure optimal performance. 

• Lead, train, and participate in technology pilots that support our CX vision. 

• Respond to and troubleshoot requests submitted through the ticketing system, providing timely resolutions and support across customer experience platforms 

Data & Insights 

• Analyze and report on technology pilots, issues, and CX projects. 

• Oversee the setup and pilots of CX technologies.  

Collaboration: 

• Work closely with operations, digital marketing, software, and training departments to ensure the success of product operations. 

• Manage relationships with vendor partners, ensuring they meet the strategic goals and timelines. 

Required Qualifications: 

• Educational Background: Bachelor’s degree in Business, Marketing, or a related field preferred but not required. 

• Experience: 5+ years in software, operations, or Multifamily services. 

• Analytical & Technical Proficiency: Skilled in data analysis, with technical knowledge of CX platforms and operational systems such as Yardi or Rent Cafe CRM to translate insights into strategic action. 

• Customer-Centric Mindset: Deep commitment to understanding and advocating for residents’ needs, behaviors, and expectations. 

• Communication Skills: Excellent written and verbal communication skills, with experience presenting to executive teams and engaging cross-functional stakeholders. 

• Cross-functional collaboration skills: Experience leading without direct authority. 

Benefits That Matter  

When you join our team, you’re stepping into a culture built around growth, wellbeing, and genuine care for our people. We’re committed to helping you thrive—professionally, personally, and financially.  

Here’s what you can look forward to:  

Personal & Financial Benefits  

• Enjoy Your Time Off: Start with 22 days of vacation, sick, and personal time. 

• Make an Impact: Enjoy 16 hours of paid volunteer time annually. 

• Recharge & Celebrate:  

• 10 paid holidays + 1 floating holiday of your choice  

• 8 hours off to celebrate your birthday 

• Future Planning: Company 401(k) match to support your financial goals. 

• Financial Wellness Reimbursement: Resources to support your long-term financial health. 

• Referral Bonuses: Earn rewards for bringing great talent to the team. 

• Exclusive Discounts: Access to savings at over 1 million retailers and Hawthorne guest suite discounts. 

Personal & Professional Development 

• Comprehensive Onboarding: Feel supported and prepared from day one. 

• Ongoing Learning: Tailored training programs to help you grow your skills and career. 

• Career Pathing: Clear, defined progression opportunities. 

• Hawthorne Cares Fund: Financial assistance available for unexpected emergencies. 

• Celebrate Success: Participate in annual Sales Rally events and contests. 

• Education Reimbursement: We invest in your continued learning. 

Health & Wellness Benefits 

• Medical & Vision: Comprehensive plans designed for peace of mind. 

• Dental & Life Insurance: 100% company-paid coverage. 

• Paid Family Leave: Maternity, paternity, and adoption leave so you can focus on what matters most. 

• 24/7/365 Telehealth Access: Connect with doctors anytime, anywhere. 

• Wellness Incentives: Earn rewards for taking care of your health. 

• Short-Term & Long-Term Disability Plan: Added protection for life’s unexpected moments. 

• Leave Bank: Additional paid time off during medical emergencies or natural disasters. 

• Fitness Reimbursement: Cash toward your gym or fitness membership. 

• Mental Wellness Tools: Free premium health and wellness subscriptions (a $450 value). 

• New Parent Perk: One year of free diapers for growing families.* 

About Hawthorne 

Hawthorne Residential Partners is a leading multifamily real estate management company headquartered in Greensboro, NC. We are proudly ranked among the Top 50 largest multifamily management companies in the United States, managing more than 64,000 apartment homes across 275+ properties and overseeing $12.5+ billion in assets throughout the Southeast, Florida, and Texas. 

Hawthorne is nationally recognized for operational excellence and resident satisfaction and is currently ranked #1 in resident satisfaction among NMHC Top 50 Managers, holding the highest score of any Division I management firm in the country. Guided by our “Live It” culture to leave people better than we found them, we are committed to delivering exceptional living experiences through thoughtful execution and strong performance at every level of the organization. 

Job Summary 

Kairos Power is seeking a highly motivated Senior Engineer will be part of the team focused on Design for Operations and the development and maturation of the Concept of Operations for the KP-FHR, with near term applicability for the Hermes Demonstration Reactor. You will work in close collaboration with systems, nuclear, mechanical, process, I&C engineering groups and operations to ensure major plant functional and operational needs are translated into the design to ensure successful plant operation. If you have power, chemical, or process plant operational and design experience, see how you can leverage it to support the next generation of clean energy. 

Responsibilities 

• Develop and refine the plant’s detailed operational strategy, including operating modes, envelopes and key state points, leveraging deep knowledge of plant performance requirements.
• Translate operational goals into actionable system- and component-level requirements for Structures, Systems and Components (SSCs), balancing performance expectations and design constraints.
• Define anticipated and planned plant transients and collaborate with simulation teams to model and assess system responses and design adequacy.
• Collaborate closely with cross-functional design teams to inform and guide plant-level decisions, ensuring operational requirements and control strategies are incorporated.
• Support design optimization efforts aimed at enhancing plant performance, reliability and availability while mitigating technical risks.
• Support development of design for operations workflows to support delivery of the plant from concept to detailed design included plant commissioning.
• Perform other duties as assigned. 

Qualifications 

• BS or MS Mechanical, Nuclear, Chemical or other related engineering discipline with 6+ years of relevant experience.
• 4+ years of experience in either plant design and/or plant performance analysis.
• Fundamental understanding of power or industrial process plant operation and equipment and the interrelationships between them.
• Plant Performance - Proficient knowledge in power plant steady state performance.
• Plant Dynamics – Proficient knowledge in power plant maneuvering, control of closed-loop heat transport systems, transient thermodynamics and T-H.
• Demonstrated experience applying understanding of plant operations in the development of plant design configuration.
• Demonstrated ability of applying engineering knowledge to deliver results while being able to thrive in an environment with evolving requirements.
• Strong technical writing skills, with the ability to clearly document operational philosophies, assumptions and technical decisions.
• Demonstrated ability to work as part of a team on problems as well as lead/coordinate the timely resolution of issues in cross functional teams.

Knowledge, Skills & Abilities 

• Strong interpersonal skills and able to be independent, resourceful, and proactive in the face of the lack of information or unknowns. 
• Desire and ability to function in a fast-paced small company environment while wearing multiple hats. 
• Working experience with plant simulation tools (e.g., APROS or other simulation platform) is desired.
• Ability to work with highly collaborative team.
• Ability to solve problems quickly and efficiently.
• Prioritizes and ensures safety of one self and others.
• Ability to proactively collect, manage and transfer knowledge.
• Ability to seek different and novel ways to create efficiencies when working on problems, challenges and issues. 

Physical Demands 

• Remaining in a stationary position for prolonged period.

Environmental Conditions 

• General office environment.
• Assessing the accuracy, neatness and thoroughness of the work assigned.
• High-concentration, demanding and fast-paced. 

Safety and PPE 

• Supporting and engaging in Process Hazards Analysis (PHA) and Haz Ops.
• Reading and interpreting hazardous warning signs.
• Reporting issues with equipment or unsafe conditions.
• Wearing proper PPE, to include face mask, face shields, gloves, safety shoes. 

Travel 

• Some travel may be required (up to 20%). 

#LI-Onsite

About Wonderschool
Wonderschool’s mission is to ensure every child has access to early childhood education that helps them realize their full potential. We empower small business owners, childcare providers, to launch and grow in-home programs through cutting-edge software, personalized coaching, and responsive support. We also partner with governments to modernize public childcare infrastructure. Our team is small, fast-moving, and deeply motivated by the impact we create in families and communities across the country.

About the Role
We are looking for a Forward Deployed AI Engineer to lead product development on some of the most strategically important initiatives at Wonderschool. You’ll spend your time working directly with customers (traveling as needed), uncovering pain points, and building AI-powered solutions that drive measurable impact across revenue, operational efficiency, and user experience. You’ll act like a founder inside the company: identifying problems, shipping code, driving adoption, and iterating quickly based on what you learn. This role blends engineering, product, operations, and business leadership, and is ideal for someone who has launched products, acquired users, and driven growth independently. You will work closely with our sales, onboarding, and account management teams to automate workflows, build better customer experiences, and unlock new growth.

This role is inspired by best-in-class FDSEs at companies like Palantir and is perfect for builders who love solving real-world problems in the field, not from behind a desk.

What You’ll Do
Work directly with users and internal teams to identify high-leverage problems and ship product solutions. Write production code (approximately 50% of your time) and ship weekly improvements across the customer journey. Use tools like Widesurf, Cursor, and other AI accelerators to increase your velocity and quality of output. Build and deploy AI-powered tooling that eliminates manual effort and improves the experience for providers, parents, and government partners. Automate onboarding flows, proposal generation, reporting processes, and other operational workflows. Own full loops: talk to users, design solutions, write code, test, deploy, and monitor adoption. Prioritize based on business impact and collaborate across teams to drive measurable results.

What Success Looks Like
You uncover user pain points faster than anyone else and consistently ship solutions that address them. You deploy AI-infused internal tools or product experiences that improve core metrics (conversion, retention, revenue). You fully own feedback loops, from discovery to deployment, and iterate rapidly. Internal teams rely on your tools to operate faster and with fewer resources. You’re moving fast, staying close to the customer, and operating with very little hand-holding.

Who You Are
A builder and founder at heart, you’ve started a company, built products that got users, or made revenue independently. Comfortable talking to users weekly and distilling insight into product decisions. Technical enough to ship production code on your own, experience with Python, JavaScript, or similar languages. Experienced using AI/LLMs and developer tools like Windsurf and Cursor to move faster and smarter. Business-minded, you’ve worked in consulting, managed a P&L, or attended business school and know how to prioritize based on ROI. Comfortable operating in ambiguity and energized by a high-trust, high-impact, in-person environment.

Why Join Us
Make a direct impact on families, small business owners, and communities. Operate with founder-like ownership on the company’s most important priorities. Join a small, fast-moving team with a bias for action. Talk to users, ship weekly, and see your work go live and drive real-world outcomes. Help reimagine early education and child care for the modern era.

Job Summary 

Kairos Power is seeking a highly motivated Senior Engineer will be part of the team focused on Design for Operations and the development and maturation of the Concept of Operations for the KP-FHR, with near term applicability for the Hermes Demonstration Reactor. You will work in close collaboration with systems, nuclear, mechanical, process, I&C engineering groups and operations to ensure major plant functional and operational needs are translated into the design to ensure successful plant operation. If you have power, chemical, or process plant operational and design experience, see how you can leverage it to support the next generation of clean energy. 

Responsibilities 

• Develop and refine the plant’s detailed operational strategy, including operating modes, envelopes and key state points, leveraging deep knowledge of plant performance requirements.
• Translate operational goals into actionable system- and component-level requirements for Structures, Systems and Components (SSCs), balancing performance expectations and design constraints.
• Define anticipated and planned plant transients and collaborate with simulation teams to model and assess system responses and design adequacy.
• Collaborate closely with cross-functional design teams to inform and guide plant-level decisions, ensuring operational requirements and control strategies are incorporated.
• Support design optimization efforts aimed at enhancing plant performance, reliability and availability while mitigating technical risks.
• Support development of design for operations workflows to support delivery of the plant from concept to detailed design included plant commissioning.
• Perform other duties as assigned. 

Qualifications 

• BS or MS Mechanical, Nuclear, Chemical, or other related engineering discipline with 6+ years of relevant experience.
• 4+ years of experience in either plant design and/or plant performance analysis.
• Fundamental understanding of power or industrial process plant operation and equipment and the interrelationships between them.
• Plant Performance - Proficient knowledge in power plant steady state performance.
• Plant Dynamics – Proficient knowledge in power plant maneuvering, control of closed-loop heat transport systems, transient thermodynamics and T-H.
• Demonstrated experience applying understanding of plant operations in the development of plant design configuration.
• Demonstrated ability of applying engineering knowledge to deliver results while being able to thrive in an environment with evolving requirements.
• Strong technical writing skills, with the ability to clearly document operational philosophies, assumptions and technical decisions.
• Demonstrated ability to work as part of a team on problems as well as lead/coordinate the timely resolution of issues in cross functional teams.

Knowledge, Skills & Abilities 

• Strong interpersonal skills and able to be independent, resourceful, and proactive in the face of the lack of information or unknowns. 
• Desire and ability to function in a fast-paced small company environment while wearing multiple hats. 
• Working experience with plant simulation tools (e.g., APROS or other simulation platform) is desired.
• Ability to work with highly collaborative team.
• Ability to solve problems quickly and efficiently.
• Prioritizes and ensures safety of one self and others.
• Ability to proactively collect, manage and transfer knowledge.
• Ability to seek different and novel ways to create efficiencies when working on problems, challenges and issues. 

Physical Demands 

• Remaining in a stationary position for prolonged period.

Environmental Conditions 

• General office environment.
• Assessing the accuracy, neatness and thoroughness of the work assigned.
• High-concentration, demanding and fast-paced. 

Safety and PPE 

• Supporting and engaging in Process Hazards Analysis (PHA) and Haz Ops.
• Reading and interpreting hazardous warning signs.
• Reporting issues with equipment or unsafe conditions.
• Wearing proper PPE, to include face mask, face shields, gloves, safety shoes. 

Travel 

• Some travel may be required (up to 20%). 

The salary range for this position is $140,600 to $165,400 for employees working onsite at our Alameda, CA headquarters. The range provided in this job posting represents the typical range or starting rate of candidates hired in California. Factors that may be used to determine your actual salary may include your education, experience, knowledge, skills, abilities, the market data for your work location, and a comparison to other employees already in the role. 

#LI-Onsite

We are seeking a detail-oriented Mechanical Commissioning Technician to support the commissioning, startup, and validation of mechanical systems in a mission-critical environment. This role is responsible for ensuring systems are installed, tested, and operating in accordance with design specifications and operational requirements.

Responsibilities:

• Execute a structured commissioning process for mechanical systems, including system verification, testing, calibration (as applicable), and validation.
• Perform detailed mechanical system walkdowns to identify deficiencies, incomplete work, or deviations from design; document findings and track resolution.
• Conduct mechanical inspections and functional testing to confirm system readiness and support startup activities.
• Coordinate with engineering, construction, and operations teams to resolve commissioning issues and ensure system performance meets design intent.
• Support system turnover and handover to operations by ensuring all commissioning requirements are completed and documented.
• Maintain accurate commissioning documentation, including reports, checklists, punch lists, and as-built records.
• Follow and enforce strict safety protocols, identifying and mitigating risks related to rotating equipment, pressurized systems, and hazardous processes.
• Perform additional duties as assigned to support project and commissioning objectives.
• Any other duties or responsibilities that may be assigned to you in your role. 

Skills Required:

• Minimum 2+ years of experience commissioning mechanical systems in a mission-critical environment (e.g., data centers, semiconductor facilities, or similar).
• Strong understanding of mechanical systems such as HVAC, piping, pumps, and rotating equipment.
• Experience with commissioning processes, documentation, and system startup procedures.
• Ability to read and interpret engineering drawings, P&IDs, and specifications.
• Strong problem-solving skills and attention to detail.
• Effective communication and coordination skills across cross-functional teams. 

Education / Licenses / Certifications:

• Associate’s or Bachelor’s degree in Mechanical Engineering, Industrial Engineering, or a related field.
• Proof of education, licenses, and certifications will be required where applicable

Benefits:

• Medical, Dental and Vision Insurance 
• Life, Short-Term, Long-Term Disability Insurance 
• Training and Education Assistance 
• 401k Retirement Plan 
• Extra Annual Leave with Years of Service 
• Maternity/Paternity Leave 
• Recognition Rewards
  
  

#INDHP

VSC Fire & Security in Albuquerque, New Mexico is seeking candidates for the position of Integrated Systems Service Technician.

Position Summary:

Integrated Systems Service Technician provides safe and efficient service on multiple integrated systems. Resolves technical issues and gives potential resolution to unresolved issues. Has a good technical knowledge and ability to communicate effectively to understand problems and offer solutions. Technician is customer-oriented and patient to deal with difficult customers. Integrated Systems may include any of the following: Fire Alarm; Intrusion Detection; Access Control; CCTV; IP Cameras; Networking Infrastructure; Telecom; BDA (Bi-Directional Antenna systems); DAS (Distributed Antenna Systems); Audio/Video; Nurse Call; Area of Refuge; Intercom; Crestron; Extron; Honeywell; Notifier; Gamewell FCI; Silent Knight; Fire Lite; Siemens; AutoCall/JCI; or RATH.

 What we offer:

• Excellent pay $35.00 - $45.00 and up based on experience
• Overtime eligible
• Company vehicle and fuel card for applicable positions
• Company cell phone and/or tablet for applicable positions
• Company Laptop for programming FACP's and Security Head-in's.
• Paid vacation and company holidays
• Medical, dental and vision insurance options for you and your family
• Health Savings Account (HSA) or Flexible Spending Account (FSA)
• Company paid life insurance for full time employees
• Employee apparel program
• Company paid long term disability insurance
• Bonus for referring new employees
• Parental leave for full-time employees
• Employee Assistance Program (EAP)
• Boot Allowance
• NICET certification test reimbursement
• Opportunities for training and advancement
• All needed Personal Protective Equipment (PPE) provided

 What you need:

• Two to three years of experience in servicing at least one or more of the following systems: fire alarm, security systems, camera systems, access control, or similar systems.
• Proficient in following written and verbal instructions, with exceptional attention to detail and communication skills.
• Ability to maintain productivity in the field, set goals, and meet service schedule.
• Competent in reading plans, documents, meters, and to discern colors for safety signage.
• Ability to follow written and verbal instructions.
• Exceptional attention to detail and communication skills.
• Eagerness for professional development and growth.
• Ability to pass various background checks.
• Reliable transportation, valid State Driver's License with acceptable driving record for use of company vehicle.
• Desirable (but not required):
  
  • NICET lI or III in FAS along with I or II in ITFAS, Avigilon Cert, other manufacturers certifications.

 What you will do:

• Installs, tests, and repairs security, camera, access control, suppression, and fire alarm systems.
• Troubleshoot system malfunctions and false alarms.
• Program multiple types of systems and test for proper operation.
• Consults with client on system issues; provides recommendations for repair.
• Uses blueprints or building plans to determine proper systems to install/service based on building layout and setting.
• Runs wiring and circuits, installs hardware, and attaches electrical wires.
• Inspects and tests systems, batteries, and electrical wiring; make adjustments, and repairs as required.
• Replaces malfunctioning hardware when necessary.
• Ensures systems comply with NEC and NFPA fire codes.
• Explains and demonstrates system function and operation to end users.
• Performs other related duties as required.
• Be on call as required.
• Serve as the first point of contact for customers seeking technical assistance over the phone or email.
• Perform remote troubleshooting through diagnostic techniques and pertinent questions.
• Provide support for form development and maintenance of inspection forms.
• Tech savvy with working knowledge of office automation products, databases, and remote control.
• Follow design plans for installation jobs and communicate any design, perform service and deficiency jobs, and communicate and document any changes.

Why This Role Matters

As the Senior Facilities Engineer, you will be the primary technical bridge
between our fusion demonstration system design team and the facility
infrastructure. This is a high-impact role responsible for the integration of
complex mechanical and electrical systems that power and support our fusion
demonstration system. You will manage the interface where cutting-edge
science meets industrial-scale engineering, overseeing design consultants to
develop bespoke hardware and ensuring the facility's infrastructure is perfectly
synchronized with the machine’s operational requirements.
This position is based in Albuquerque, NM, and will require up to 50% travel to
our San Leandro, CA facility for the first year to embed with the design team
during the critical engineering phase.

What You'll Do

• Oversee the interface between the fusion demonstration system design
  and the facility infrastructure, ensuring M&E systems (power, cooling,
  and utilities) meet stringent scientific requirements
• Manage relationships and technical deliverables with external design
  consultants to develop large-scale mechanical and electrical hardware
  supporting the system
• Work with the Infrastructure Design Team to ensure facility systems are
  documented and designed appropriately for permitting, construction,
  and long-term operations
• Support the physical assembly and construction of the fusion
  demonstration system, coordinating the installation of critical
  subsystems within the facility
• Support the development of utility systems including high-voltage
  electrical distribution, specialized cooling loops, and vacuum system
  infrastructure
• Support the commissioning and transition of building systems from
  construction into full-scale research operations

What You Bring

• Minimum BS in Mechanical or Electrical Engineering (Dual-discipline
  familiarity is a significant plus)
• 10+ years of experience in the design, construction, and
  commissioning of large-scale industrial or scientific research facilities
• Proven track record managing complex M&E infrastructure, including
  high-voltage power, process piping, and industrial cooling
• Significant experience managing engineering consultants and large-
  scale hardware procurement contracts
• Proactive, "DOer," and self-starter capable of navigating the ambiguity
  of a first-of-a-kind research project
• A positive attitude and the ability to influence cross-functional teams of
  scientists, engineers, and contractors

Bonus Points For

• Previous experience at a National Laboratory (e.g., SNL, LANL, LLNL)
  or similar highly-regulated research environments
• Experience overseeing construction or facilities involving radiological
  shielding, hot cells, or other high-energy physics hazards
• Knowledge of pulsed-power infrastructure, ultra-high vacuum (UHV)
  environments, or cryogenic systems
• PE (Professional Engineer) license
• Experience working closely with PhD scientists and R&D organizations
  to translate theoretical needs into physical hardware

ENSCO Inc is a diverse engineering and technology company that provides engineering, science and advanced technology solutions that guarantee mission success, safety, and security to governments and private industries worldwide. ENSCO provides technical subject matter experts to support the Defense Threat Reduction Agency (DTRA). Duties will include:
• Develop, manage, and implement instrumentation plans and methodologies to meet measurement objectives to support DTRA testing.
• Conduct research, development, and integration efforts for DTRA to maintain currency in state-of-the-art and emerging/developmental data acquisition systems and sensor technologies across the CWMD testing spectrum. • • • Develop and implement rigorous processes to ensure new sensor and data acquisition technologies are properly investigated and validated prior to introduction into the DTRA inventory.

• Direct integrated product support and readiness teams to deliver mission-critical capabilities and continuous operational support.
• Develop and execute LCSPs, Product Support Packages, and DSOR analyses, and influence design through milestone reviews to improve supportability and affordability.
• Lead cross-functional government/contractor partners and drive cost-reduction initiatives while aligning cost, schedule, and performance objectives across the portfolio.

Qualifications Required
• Bachelors + 10 years of experience or Masters +5 years of experience in a science or engineering field.
• 7+ years development and implementation of instrumentation plans for highly complex experiments.
• Experience designing, building, calibrating, and troubleshooting advanced sensors and data acquisition systems (hardware/software) to measure high-frequency phenomena and WMD effects.
• Proven track record in Creating, validating, and implementing instrumentation plans for field tests and laboratory experiments, including monitoring testbed/tunnel construction.
• Demonstrated capability in collecting and analyzing data from tests to evaluate the performance of weapons, sensors, and protective materials.
• Prior knowledge in ensuring test environments accurately simulate real-world, adversarial WMD scenarios (e.g., hardened, deeply buried targets).
• Background in submitting detailed, actionable reports to DTRA on test results, equipment performance, and, potential issues.
• AN ACTIVE DOD TOP SECRET CLEARANCE IS REQUIRED FOR THIS POSITION FOR WHICH YOU MUST BE A U.S. CITIZEN.

Qualifications Desired
• Direct experience with Counter WMD Weapons and Capabilities program with DTRA
• Technical skills to understand and analyze system problems, define potential solutions, and conduct in-depth analysis, assessments and trades and explain methodologies.
• Ability to research, evaluate, interpret, and apply rules, regulations, and procedures to a variety of situations and to recommend timely and economical solutions.
• Ability to communicate clearly, concisely, and with technical accuracy, both orally and in writing, as well as work in a professional manner with peers, management, contractors, academia, and other agencies.
• Strong written and verbal skills including writing reports and presenting results to customers
• CURRENT SCI ADJUDICATED FOR A DTRA PROGRAM IS DESIRED FOR THIS POSITION FOR WHICH YOU MUST BE A U.S. CITIZEN.

Required Certifications: None
U.S. Citizenship Required: Yes
Security Clearance Required: Top Secret
Employment Type: Regular Full-time
Background Check Type: 7 Year Pre-Employment
Drug Screen Required: None
Position Contingent Upon Contract Award: Yes

ENSCO Inc is a diverse engineering and technology company that provides engineering, science and advanced technology solutions that guarantee mission success, safety, and security to governments and private industries worldwide. ENSCO provides technical subject matter experts to support the Defense Threat Reduction Agency (DTRA). Duties will include:
• Provide recommendations and functional analysis of technology specifications to define test objectives and parameters across the Chemical, Biological, Radiological, Nuclear, and Explosive (CBRNE) spectrum for the development of the Statement of Test Objectives (SOTO).
• Provide recommendations and functional analysis of technology specifications across the CBRNE spectrum for the development of the Test Requirements Document (TRD), Test Design Document (TDD), and Test Execution Document (TEP).
• Develop system engineering standards to measure the effectiveness of weapon system technologies against targets within the full WMD and C-WMD spectrum.
• Perform systems engineering assessments supporting Nuclear Fuel Cycle testing events.
• Perform systems engineering assessments supporting improvised explosive devices, pre and post detonation.
• Perform functions in the full spectrum WMD/C-WMD and CBRNE space to define limited access of technology gaps for weapons and weapon systems.
• Perform systems engineering for nuclear and non-nuclear weapons and weapon systems including small unmanned aerial vehicles (sUAS) to support technology growth in defined capability gaps.
• Background in performing job duties in areas with exposure to heavy construction, confined space environments, rattlesnakes, spiders, rodents, radiation, extremes in weather and walking or driving over hazardous terrain, in underground tunnels and target structures.
• Personnel performing this task shall be respiratory qualified and capable of wearing a Self-Contained Breathing Apparatus (SCBA) (approximately 50 lbs.) while performing phased re-entry of test beds and target structures.
• Capable of operating rental vehicles and towing cargo or equipment trailers with a gross combined vehicle weight of less than 26,000 lbs.
• Ability to operate utility terrain vehicles (UTV) as-needed
• Significant travel to test locations will be required.

Qualifications Required
• Bachelors or equivalent with 7+ years development and implementation of instrumentation plans for highly complex experiments.
• Past experience in systems engineering analysis and assessments using counter radio electronic warfare systems demonstrating performance measures against testing of weapon systems, sUAS and improvised explosive devices.
• Capability to perform targeting assistance with national technical means support to WMD/CWMD testing.
• Demonstrated experience in systems engineering analysis to homemade explosives testing defining capabilities and gaps supporting the WMD mission space.
• Ability to perform test bed/test article preparation/verification consistent with test design and requirements documents; serve as on-site point of contact (POC) for technical issues.
• Knowledge in developing test articles and ensuring test support infrastructure at test sites utilized by RD-TS, are in a state of readiness, as specified and resourced by the Contracting Officer's representative(COR), so DTRA and external RDT&E program managers are able to support testing with minimum startup or preparation time.
• Ability to assemble unique Radiation Signature Testing Devices (RSTD).
• Prior experience in working/entering in permit required confined spaces as an entrant, and or rescue and don up to Level A personal protective equipment.
Required training/certification before coming to the position:

• OSHA Permit-Required Confined Space Training, OSHA 510 (Construction), 511 (General Industry), and 7405 (Fall Protection) training or Occupational Safety degree or Associate (or higher) Safety Professional credential
• OSHA Hazardous Waste Operations and Emergency Response (HAZWOPER) 40-hour Training
  • AN ACTIVE DOD TOP SECRET CLEARANCE IS REQUIRED FOR THIS POSITION FOR WHICH YOU MUST BE A U.S. CITIZEN.

Qualifications Desired
• Direct experience with Counter WMD Weapons and Capabilities program with DTRA
• Ability to provide trade-off analyses to enhance performance while minimizing cost and programmatic risk to identify weapon system requirements for identified capability gaps/shortfalls for the purpose of developing technology maturation roadmaps.
• Understanding of the engineering assessments required for the identification of the technology gaps in WMD Defeat and Hard Target Defeat (HTD) weapon systems that currently limit the predictive capability of design limits/margins at the weapon system/subsystem/component levels.
• Experience in working within a matrixed test teams as the Test Scientist, Technical Coordinator, and/or Site Coordinator involved in CWMD testing to include CBRNE agents/materials, pharmaceutical based agents, toxic industrial chemicals & toxic industrial materials, IED and UAS threats.
• Capability to serve in multiple roles including Test Scientist, Technical Coordinator, and/or Site Coordinator duties in accordance with RD-TS policy for Test Operations, Operating Instruction 2 or successor.
• Additional training/certification for the position:

• OSHA Hazardous Waste Operations and Emergency Response (HAZWOPER) 8-hour Refresher Training
• DTRA Site-Specific Underground Training
• First Aid, CPR, and AED training
• sUAS pilot
  • Technical skills to understand and analyze system problems, define potential solutions, and conduct in-depth analysis, assessments and trades and explain methodologies.
  • Strong written and verbal skills including writing reports and presenting results to customers
  • ABILITY TO OBTAIN AN SCI IS DESIRED FOR THIS POSITION FOR WHICH YOU MUST BE A U.S. CITIZEN.

Required Certifications: None
U.S. Citizenship Required: Yes
Security Clearance Required: Top Secret
Employment Type: Regular Full-time
Background Check Type: 7 Year Pre-Employment
Drug Screen Required: None
Position Contingent Upon Contract Award: Yes

Summary

QuEra Computing is seeking a Laser Systems Engineer to support the development and evaluation of laser subsystems used in neutral-atom quantum computing platforms. This role will serve as a key technical liaison for vendor collaboration and test and evaluation activities.

The engineer will work closely with QuEra’s Laser Systems and Quantum Systems teams to support subsystem testing, qualification, and scaling efforts. A core responsibility of this role is coordinating with vendors and partners to ensure that laser and photonic subsystems meet performance, reliability, and integration requirements as QuEra’s quantum computing systems scale.

This position will also serve as the on-site technical interface for test and evaluation activities associated with DARPA’s Quantum Benchmarking Initiative (QBI) and related programs. The role involves coordinating subsystem evaluation, test protocols, and milestone documentation.

The ideal candidate combines hands-on experience with advanced laser systems, strong experimental troubleshooting skills, and the ability to work effectively with external partners and multidisciplinary engineering teams.

~20% travel to partner facilities and vendor sites is required.

Responsibilities

Laser System Scaling and Architecture Development

• Work closley with our Laser System team on supporting the development and scaling of QuEra’s laser infrastructure as quantum systems grow in size and complexity.
• Explore approaches for increasing optical power, stability, and scalability across multi-wavelength laser systems together with the laser system and quantum hardware team.
• Evaluate potential architectures, technologies, and vendor solutions that support higher-power and more scalable laser subsystems.
• Contribute to technical discussions and experiments aimed at improving laser system performance, reliability, and manufacturability as systems transition from experimental prototypes toward larger-scale deployments.

Vendor Collaboration and Subsystem Qualification

• Serve as the technical point of contact for vendors developing laser and optical subsystems.
• Coordinate subsystem testing, qualification, and integration activities with external partners.
• Support vendor evaluation, component qualification, and performance verification for critical optical hardware.

QBI Testing and Evaluation Liaison

• Serve as the on-site technical interface for Quantum Benchmarking Initiative (QBI) test and evaluation activities.
• Coordinate with QuEra’s Laser Systems team to define subsystem test procedures, instrumentation requirements, and evaluation protocols.
• Support milestone documentation, technical reporting, and data collection for federal research programs.

Additional Responsibilities

• Collaborate with photonics, optics, and quantum systems teams to define subsystem interface requirements and integration workflows.
• Assist with development of test infrastructure for evaluating laser performance, stability, and reliability.
• Support procurement, documentation, and lifecycle management of laser and optical components.
• Contribute to development of operational procedures, safety practices, and technical documentation for laser systems.
• Participate in cross-site coordination with QuEra engineering teams and external research partners.

Qualifications

• 5+ years of hands-on experience operating or maintaining advanced laser systems.
• Experience working with free-space optics, fiber optics, and optomechanical assemblies.
• Strong skills in optical alignment, beam diagnostics, and troubleshooting complex optical systems.
• Familiarity with laser control electronics, feedback systems, or instrumentation used in optical experiments.
• Experience working in laboratory or prototype environments with uptime or experimental reliability requirements.
• Solid understanding of laser safety practices for high-power optical systems.

Preferred Qualifications

• Master’s or Ph.D. in Optics, Physics, Electrical Engineering, Photonics, or a related field.
• Experience with AMO systems, cold-atom experiments, or photonics platforms for quantum technologies.
• Familiarity with laser stabilization techniques (familiarity with laser characterization and performance verification techniques).
• Experience collaborating with external vendors or research partners on photonic or optical subsystems.
• Prior experience working on DARPA, DOE, or other federally funded R&D programs and preparing milestone documentation.
• Strong technical communication and documentation skills.

QuEra is committed to cultivating a diverse work environment and is proud to be an equal opportunity employer. We highly value diversity in our current and future employees and do not discriminate (including in our hiring and promotion practices) based on race, religion, color, national origin, gender, gender expression, sexual orientation, age, marital status, veteran status, disability status, or any other characteristic protected by law.

#LI-NB1

ENSCO Inc is a diverse engineering and technology company that provides engineering, science and advanced technology solutions that guarantee mission success, safety, and security to governments and private industries worldwide. ENSCO provides technical subject matter experts to support the Defense Threat Reduction Agency (DTRA). Duties will include:
• Develop, manage, and implement instrumentation plans and methodologies to meet measurement objectives to support DTRA testing.
• Conduct research, development, and integration efforts for DTRA to maintain currency in state-of-the-art and emerging/developmental data acquisition systems and sensor technologies across the CWMD testing spectrum. • • • Develop and implement rigorous processes to ensure new sensor and data acquisition technologies are properly investigated and validated prior to introduction into the DTRA inventory.

• Direct integrated product support and readiness teams to deliver mission-critical capabilities and continuous operational support.
• Develop and execute LCSPs, Product Support Packages, and DSOR analyses, and influence design through milestone reviews to improve supportability and affordability.
• Lead cross-functional government/contractor partners and drive cost-reduction initiatives while aligning cost, schedule, and performance objectives across the portfolio.

Qualifications Required
• Bachelors + 10 years of experience or Masters +5 years of experience in a science or engineering field.
• 7+ years development and implementation of instrumentation plans for highly complex experiments.
• Experience designing, building, calibrating, and troubleshooting advanced sensors and data acquisition systems (hardware/software) to measure high-frequency phenomena and WMD effects.
• Proven track record in Creating, validating, and implementing instrumentation plans for field tests and laboratory experiments, including monitoring testbed/tunnel construction.
• Demonstrated capability in collecting and analyzing data from tests to evaluate the performance of weapons, sensors, and protective materials.
• Prior knowledge in ensuring test environments accurately simulate real-world, adversarial WMD scenarios (e.g., hardened, deeply buried targets).
• Background in submitting detailed, actionable reports to DTRA on test results, equipment performance, and, potential issues.
• AN ACTIVE DOD TOP SECRET CLEARANCE IS REQUIRED FOR THIS POSITION FOR WHICH YOU MUST BE A U.S. CITIZEN.

Qualifications Desired
• Direct experience with Counter WMD Weapons and Capabilities program with DTRA
• Technical skills to understand and analyze system problems, define potential solutions, and conduct in-depth analysis, assessments and trades and explain methodologies.
• Ability to research, evaluate, interpret, and apply rules, regulations, and procedures to a variety of situations and to recommend timely and economical solutions.
• Ability to communicate clearly, concisely, and with technical accuracy, both orally and in writing, as well as work in a professional manner with peers, management, contractors, academia, and other agencies.
• Strong written and verbal skills including writing reports and presenting results to customers
• CURRENT SCI ADJUDICATED FOR A DTRA PROGRAM IS DESIRED FOR THIS POSITION FOR WHICH YOU MUST BE A U.S. CITIZEN.

Required Certifications: None
U.S. Citizenship Required: Yes
Security Clearance Required: Top Secret
Employment Type: Regular Full-time
Background Check Type: 7 Year Pre-Employment
Drug Screen Required: None
Position Contingent Upon Contract Award: Yes

ENSCO Inc is a diverse engineering and technology company that provides engineering, science and advanced technology solutions that guarantee mission success, safety, and security to governments and private industries worldwide. ENSCO provides technical subject matter experts to support the Defense Threat Reduction Agency (DTRA). Duties will include:
• Provide recommendations and functional analysis of technology specifications to define test objectives and parameters across the Chemical, Biological, Radiological, Nuclear, and Explosive (CBRNE) spectrum for the development of the Statement of Test Objectives (SOTO).
• Provide recommendations and functional analysis of technology specifications across the CBRNE spectrum for the development of the Test Requirements Document (TRD), Test Design Document (TDD), and Test Execution Document (TEP).
• Develop system engineering standards to measure the effectiveness of weapon system technologies against targets within the full WMD and C-WMD spectrum.
• Perform systems engineering assessments supporting Nuclear Fuel Cycle testing events.
• Perform systems engineering assessments supporting improvised explosive devices, pre and post detonation.
• Perform functions in the full spectrum WMD/C-WMD and CBRNE space to define limited access of technology gaps for weapons and weapon systems.
• Perform systems engineering for nuclear and non-nuclear weapons and weapon systems including small unmanned aerial vehicles (sUAS) to support technology growth in defined capability gaps.
• Background in performing job duties in areas with exposure to heavy construction, confined space environments, rattlesnakes, spiders, rodents, radiation, extremes in weather and walking or driving over hazardous terrain, in underground tunnels and target structures.
• Personnel performing this task shall be respiratory qualified and capable of wearing a Self-Contained Breathing Apparatus (SCBA) (approximately 50 lbs.) while performing phased re-entry of test beds and target structures.
• Capable of operating rental vehicles and towing cargo or equipment trailers with a gross combined vehicle weight of less than 26,000 lbs.
• Ability to operate utility terrain vehicles (UTV) as-needed
• Significant travel to test locations will be required.

Qualifications Required
• Bachelors or equivalent with 7+ years development and implementation of instrumentation plans for highly complex experiments.
• Past experience in systems engineering analysis and assessments using counter radio electronic warfare systems demonstrating performance measures against testing of weapon systems, sUAS and improvised explosive devices.
• Capability to perform targeting assistance with national technical means support to WMD/CWMD testing.
• Demonstrated experience in systems engineering analysis to homemade explosives testing defining capabilities and gaps supporting the WMD mission space.
• Ability to perform test bed/test article preparation/verification consistent with test design and requirements documents; serve as on-site point of contact (POC) for technical issues.
• Knowledge in developing test articles and ensuring test support infrastructure at test sites utilized by RD-TS, are in a state of readiness, as specified and resourced by the Contracting Officer's representative(COR), so DTRA and external RDT&E program managers are able to support testing with minimum startup or preparation time.
• Ability to assemble unique Radiation Signature Testing Devices (RSTD).
• Prior experience in working/entering in permit required confined spaces as an entrant, and or rescue and don up to Level A personal protective equipment.
Required training/certification before coming to the position:

• OSHA Permit-Required Confined Space Training, OSHA 510 (Construction), 511 (General Industry), and 7405 (Fall Protection) training or Occupational Safety degree or Associate (or higher) Safety Professional credential
• OSHA Hazardous Waste Operations and Emergency Response (HAZWOPER) 40-hour Training
  • AN ACTIVE DOD TOP SECRET CLEARANCE IS REQUIRED FOR THIS POSITION FOR WHICH YOU MUST BE A U.S. CITIZEN.

Qualifications Desired
• Direct experience with Counter WMD Weapons and Capabilities program with DTRA
• Ability to provide trade-off analyses to enhance performance while minimizing cost and programmatic risk to identify weapon system requirements for identified capability gaps/shortfalls for the purpose of developing technology maturation roadmaps.
• Understanding of the engineering assessments required for the identification of the technology gaps in WMD Defeat and Hard Target Defeat (HTD) weapon systems that currently limit the predictive capability of design limits/margins at the weapon system/subsystem/component levels.
• Experience in working within a matrixed test teams as the Test Scientist, Technical Coordinator, and/or Site Coordinator involved in CWMD testing to include CBRNE agents/materials, pharmaceutical based agents, toxic industrial chemicals & toxic industrial materials, IED and UAS threats.
• Capability to serve in multiple roles including Test Scientist, Technical Coordinator, and/or Site Coordinator duties in accordance with RD-TS policy for Test Operations, Operating Instruction 2 or successor.
• Additional training/certification for the position:

• OSHA Hazardous Waste Operations and Emergency Response (HAZWOPER) 8-hour Refresher Training
• DTRA Site-Specific Underground Training
• First Aid, CPR, and AED training
• sUAS pilot
  • Technical skills to understand and analyze system problems, define potential solutions, and conduct in-depth analysis, assessments and trades and explain methodologies.
  • Strong written and verbal skills including writing reports and presenting results to customers
  • ABILITY TO OBTAIN AN SCI IS DESIRED FOR THIS POSITION FOR WHICH YOU MUST BE A U.S. CITIZEN.

Required Certifications: None
U.S. Citizenship Required: Yes
Security Clearance Required: Top Secret
Employment Type: Regular Full-time
Background Check Type: 7 Year Pre-Employment
Drug Screen Required: None
Position Contingent Upon Contract Award: Yes

Summary

QuEra Computing is seeking a Quantum Scientist to develop system- and algorithm-level performance models for large-scale neutral-atom quantum computers. This role focuses on translating device- and architecture-level models into quantitative estimates of algorithmic fidelity, runtime, and time-to-solution for representative quantum workloads.

Working at the interface of quantum algorithms, architecture and benchmarking, you will analyze how hardware constraints and effective error models impact end-to-end computational performance. You will develop system-level performance and runtime models that map device and architecture characteristics to algorithmic success probability, throughput, and time-to-solution. You will collaborate closely with hardware theory, experimental, and application development teams. Your work will directly support internal design decisions and external benchmarking efforts, including participation in programs such as DARPA’s Quantum Benchmarking Initiative (QBI). The ideal candidate combines deep theoretical understanding with practical data-driven insight.

Qualifications

• 5+ years of experience in performance modeling, simulation, or analysis of quantum systems or other complex computational/physical systems.
• Strong background in quantum information science, computational physics, or a closely related quantitative discipline.
• Proficiency in numerical modeling and data analysis using Python or Julia.
• Demonstrated ability to analyze experimental or simulated data and correlate results with abstracted models.
• Strong written and verbal communication skills for technical documentation and cross-disciplinary collaboration.

Preferred Qualifications

• Experience with benchmarking or performance modeling in quantum computing platforms (neutral atoms, ions, superconducting qubits, or similar).
• Experience developing or using abstracted error and performance models to evaluate system- and algorithm-level behavior.
• Prior participation in federally funded research programs (e.g., DARPA, DOE) or large collaborative research efforts.
• Track record of publications or technical contributions related to system-level performance analysis or benchmarking.

QuEra is committed to cultivating a diverse work environment and is proud to be an equal opportunity employer. We highly value diversity in our current and future employees and do not discriminate (including in our hiring and promotion practices) based on race, religion, color, national origin, gender, gender expression, sexual orientation, age, marital status, veteran status, disability status, or any other characteristic protected by law.

#LI-NB1

Why This Role Matters

The Rigging, Fixtures and Ground Support Equipment Engineer will design, analyze, and procure custom handling equipment for lifting, in factory movement and overland transportation of Pacific Fusion’s large custom hardware. You will utilize your expertise in heavy lifts, speciality rigging and in factory movement to create innovative designs to address unique installation and transportation challenges on rapid timelines across multiple locations. In this role you will work collaboratively with engineers, production employees, and scientists to optimize equipment designs across the company for safety, efficiency, and cost as we bring our demonstration system online. This role needs to be onsite at our Los Lunas, New Mexico facility. 

What You'll Do

• Design, analyze, and procure a broad range of lifting and transportation fixtures and handling equipment for specialty hardware.

• Working closely with relevant engineers to meet strict technical and operational requirements.

• Use industry standards and relevant regulations to apply best practices for future designs and improve existing designs.

• Review all lift and transport fixture designs for structural integrity under dynamic and static loading.

• Create and/or review detailed CAD models, FEA, and mechanical fabrication drawings of all custom fixtures and handling equipment.

• Document equipment testing requirements and findings to optimize next revision of designs.

• Mentor larger design engineering workforce on lift and transport fixture best practices.

What You Bring

• Bachelor’s degree in Mechanical or Civil Engineering, with Structural focus or Masters degree preferred.

• 7+ years experience in designing and analyzing lift, transportation, and handling fixtures for large hardware with a proven track record of rigor, creative problem solving, and success.

• Deep knowledge of rigging equipment, lifting techniques, load path analysis, and safety standards (e.g., ASME B30 series, OSHA 1926).

• Expertise in design and analysis (structural and FEA) of custom lift, transportation, and handling fixtures for large and heavy hardware.

• Expertise in variety of cranes (bridge, gantry, mobile, et.c), forklifts, below-the-hook lift fixtures.

• Experience in road-transport vehicle options, custom road-transport container/fixtures, permitting requirements for oversized loads.

• Proficiency in CAD to create detailed design, drawings, and FEA.

• Ability to work independently and collaboratively in a fast-paced startup environment.

• Strong communication, documentation, and organizational skills.

Bonus Points For

• PE license.

• Design for lift fixtures in nuclear facilities, including remotely connected and operated lift fixtures.

• Experience with integrating hydraulic and/or motorized systems into fixture designs to precisely align large and heavy hardware.

• Experience in designing end of arm manipulator systems for robotic applications.

• Experience working in industries such as: nuclear, energy, aerospace, and/or construction.

Job Summary

Kairos Power is seeking a highly motivated Process Engineer with expertise in the development and implementation of chemical and physical processes stream related equipment, to support the Kairos Power fuels program. In this role, you will work within an engineering team to design, construct, commission, and optimize performance of the process equipment necessary for TRISO particle fabrication. You will also work cross-functionally with facility operations, facility engineers, quality assurance, and environmental, health and safety (EHS) to enable supporting functions.

Responsibilities

• Interpret process engineering information communicated via Process Flow Diagrams (PFDs), including heat and material balances, process envelopes, and their integration into mechanical designs.
• Develop equipment specifications and size equipment such as tanks, vessels, valves, lines, and pumps based on process needs.
• Prepare equipment lists and data sheets for equipment.
• Develop and/or approve manufacturing drawings for custom-designed equipment.
• Interface with vendors for procurement of equipment and instruments.
• Work with the Lead Responsible Engineer to develop the equipment commissioning plan and procedures.
• Coordinate with facility operations to implement, test, and optimize TRISO fuel fabrication processes.
• Provide technical oversight of fuel fabrication processes and incorporate best practices for continuous improvement.
• Work with other engineers and technologists to understand mechanical deficiencies and opportunities for process equipment improvements, incorporating those learnings into design improvements.
• Partner with manufacturing team and participate in equipment manufacturing, assembly, and test certification of process equipment skids.
• Perform other duties as assigned.

Qualifications

• Bachelor’s degree in Chemical Engineering, Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, or similar discipline.
• 5+ years performing duties in a process or mechanical engineering role in a chemical, pharmaceutical, industrial, or manufacturing setting.
• Experience in generating Process Flow Diagrams (PFDs), Heat & Material Balances (H&MBs), Piping & Instrumentation Diagrams (P&IDs), equipment lists, and utility consumption lists.
• Experience working with hazardous processes and chemicals, including the implementation of appropriate safety controls.
• Experience in commissioning new vendor-supplied equipment, as well as being able to commission in-house designed equipment.

Knowledge, Skills & Abilities

• Proficient with engineering software programs including CAD, SolidWorks, and modeling software.
• Ability to work with highly collaborative teams.
• Ability to identify opportunities for improvement of existing equipment.
• Ability to verify process designs against mechanical designs, in keeping with operational and maintenance interfaces to ensure that systems and facility are optimal from an installation, integration, operational and maintenance perspective.
• Familiar with process documentation, including PFDs and P&IDs, and how they inform industrial system operations and integration.
• Strong problem-solving and organizational skills, able to manage multiple priorities in dynamic environments while maintaining attention to detail.
• Excellent written and verbal communication skills, with the ability to clearly document plans and effectively convey information across engineering, operations, and leadership teams.
• Ability to be proactive and adaptable.
• Prioritizes and ensures safety of oneself and others.
• Ability to proactively collect, manage and transfer knowledge.
• Ability to seek different and novel ways to create efficiencies when working on problems, challenges and issues.

Physical Demands

• Ascending or descending ladders, stairs, scaffolding, ramps, scissor lifts, articulated boom lifts and the like.
• Moving self in different positions to accomplish tasks in various environments including tight and confined spaces.
• Remaining in a stationary position, often standing, or sitting for prolonged periods.
• Moving about to accomplish tasks or moving from one worksite to another.
• Adjusting, moving, transporting, installing, positioning, or removing objects up to 10 pounds in all directions.
• Communicating with others to exchange information.

Environmental Conditions

• General office environment.
• Noisy environments.
• Odors or fumes from chemicals or chemical reactions.
• Assessing the accuracy, neatness and thoroughness of the work assigned.
• High-concentration, demanding and fast-paced.

Safety and PPE

• Reading and interpreting hazardous warning signs.
• Reporting issues with equipment or unsafe conditions.

Travel

• Some travel may be required, up to 5%

Additional Requirements

• Seldom requires working weekends.
• Occasionally requires schedule flexibility.
• Seldom requires extended hours to support launch and critical project timelines.

• Onsite: #LI-Onsite

Job Summary  

Kairos Power is seeking a highly motivated Instrumentation, Controls and Electrical (IC&E) Engineer with expertise in the development and implementation of instrumentation and control systems for chemical and physical processes to support the Kairos Power fuels program. In this role, you will work within a process and mechanical engineering team to facilitate design, construct, commission, and optimize process equipment and automation systems necessary for TRISO particle fabrication. You will also work cross-functionally with facility operations, facility engineers, quality assurance, and environmental, health & safety (EHS) to enable supporting functions. 

Responsibilities  

• Perform IC&E engineering functions, including supporting the development and implementation of process automation control to support the responsible engineer’s process control narrative and safety design approach.
• Support the responsible engineer in the development of equipment and instrumentation specifications to enable process control for tanks, vessels, valves, lines, and pumps based on process and operational needs as outlined by the responsible engineer.
• Support responsible engineers in the preparation of and maintenance of equipment and instrumentation lists and data sheets.
• Support the responsible engineer in working with the CAD design team to plan cabling, instrumentation and electrical/interface requirements on skid designs supporting process automation.
• Support the responsible engineer in interfacing with vendors and suppliers for procurement of equipment and instruments.
• Support the responsible engineer to develop the equipment commissioning plan, procedures and test documentation.
• Collaborate with the responsible engineer in coordinating with facility operations to implement, optimize and sustain TRISO fuel fabrication processes and associated control systems.
• Support responsible engineers in providing technical instrumentation oversight for fuel fabrication processes and identify opportunities for continuous improvement to improve safety, yield, reliability, maintainability, and operational efficiency. 
• Support responsible engineers in process hazard analyses (e.g., HAZOPs, What-If analyses) by participating in team-based, design and operational safety reviews.
• Support responsible engineers in troubleshooting of process upsets, instrumentation equipment failures and quality deviations during fabrication, commissioning and operations.
• Perform other duties as assigned. 

Qualifications 

• Bachelor’s degree in Electrical Engineering, Controls Engineering, Instrumentation Engineering, or similar discipline or an equivalent combination of relevant education and experience may be considered. 
• 1+ years of experience performing duties as an IC&E engineer in a chemical, pharmaceutical, industrial, or manufacturing setting.
• Experience in reading and interpreting PFDs, P&IDs, equipment lists, and utility consumption lists.
• Experience working with hazardous processes and chemicals and implementing appropriate safety controls.
• Experience in commissioning new vendor supplied equipment, as well as being able to commission in-house designed equipment.

Knowledge, Skills & Abilities 

• Capability in using Cause-and-Effect (C&E) diagrams developed by responsible engineers, to inform controls sequencing.
• Ability to interpret CAD drawings to support IC&E design needs, in terms of cable routing.
• Proven team player with excellent verbal, written communication/presentation and interpersonal skills.
• Ability to work with highly collaborative teams.
• Being able to identify opportunities for improvement of existing equipment.
• Ability to support design reviews by comparing process design intent against mechanical designs and identifying installation, integration, operational, and maintenance interface considerations under guidance.  
• Familiar with process documentation, including PFDs and P&IDs, and how they inform industrial system operations and integration.
• Strong problem-solving and organizational skills, able to manage multiple priorities in dynamic environments while maintaining attention to detail.
• Ability to clearly document plans and effectively convey information across engineering, operations and leadership teams.
• Ability to be proactive and adaptable.
• Prioritizes and ensures safety of oneself and others.
• Ability to proactively collect, manage and transfer knowledge.
• Ability to seek different and novel ways to create efficiencies when working on problems, challenges and issues. 

Physical Conditions 

• Ascending or descending ladders, stairs, scaffolding, ramps, scissor lifts, articulated boom lifts and the like.
• Moving self in different positions to accomplish tasks in various environments including tight and confined spaces.
• Remaining in a stationary position, often standing or sitting for prolonged periods.
• Moving about to accomplish tasks or moving from one worksite to another.
• Adjusting, moving, transporting, installing, positioning, or removing objects up to 10 pounds in all directions.
• Communicating with others to exchange information. 

Environmental Conditions  

• General office environment.
• Noisy environments.
• Odors or fumes from chemicals or chemical reactions.
• Accessing the accuracy, neatness and thoroughness of the work assigned.
• High-concentration, demanding and fast-paced.

Safety and PPE  

• Reading and interpreting hazardous warning signs.
• Reporting issues with equipment or unsafe conditions.
• Wearing proper PPE, to include face mask, face shields, gloves, safety shoes, etc. 

Travel  

• Some travel may be required, up to 5% 

Additional Requirements   

• Seldomly requires working weekends.
• Occasionally requires schedule flexibility.
• Seldomly requires extended hours to support launch and critical project timelines.  

#LI-Onsite

Job Summary

Kairos Power is seeking a Director of Product Cost Strategy and Forecasting to lead the development and execution of the company’s product cost architecture and forecasting systems. This leader will own the methodologies, tools, and processes that enable Kairos Power to estimate and forecast the cost of its reactor systems, fuel, salt, and supporting infrastructure with accuracy, transparency, and consistency. These cost insights will directly inform corporate forecasting, pricing, contracting, and investment decisions as the company transitions from demonstration to commercial deployment.

Reporting to the Senior Director of Strategic Initiatives, the Director of Product Cost Strategy and Forecasting will collaborate closely with the Director of FP&A, Cost Accounting Manager, and technical leaders across Engineering, Manufacturing, and Supply Chain. The role requires exceptional cross-functional coordination and the ability to bridge technical, financial, and operational disciplines. The successful candidate will combine strong analytical capability with a practical understanding of engineered systems and manufacturing economics to drive predictable, competitive, and continuously improving product costs across Kairos Power’s programs.

Responsibilities

Forecasting and Methodology

• In close collaboration with cross-functional stakeholders, support and coach the relevant technology teams and cost owners in the development of an enterprise-wide cost forecasting framework that integrates engineering, manufacturing, and financial data to inform planning, pricing, and contracting decisions
• Develop and maintain parameterized cost models across major domains—including salt, fuel, reactor hardware, construction, and shared infrastructure—ensuring transparency, traceability, and consistency in assumptions and data sources.
• Define and document cost estimation methodologies, inputs, and governance processes to ensure alignment with corporate forecasting and investor-facing financial models.
• Establish and manage a regular forecasting cadence synchronized with company planning cycles, enabling leadership to make data-driven investment, pricing, and contracting decisions.
• Work closely with Engineering and other technical cost owners to ensure assumptions are well-documented, realistic, and consistently applied across systems, serving as both a coach and partner in developing cost maturity.

Cross-Functional Collaboration

• Partner with Finance, Accounting, and FP&A to ensure cost forecasts directly inform budgeting, scenario analysis, and long-range financial planning.
• Work with the Cost Accounting Manager to reconcile forecasts against actuals, perform root-cause variance analyses, and refine assumptions based on observed performance.
• Collaborate with Engineering, Supply Chain, and Manufacturing teams to identify and track cost drivers, anticipate future cost impacts, and inform design and sourcing decisions.
• Coordinate with the Strategy team and FP&A to align product cost models with corporate pro forma, techno-economic, and investor-facing analyses.
• Foster strong communication and data-sharing practices across disciplines to ensure a unified understanding of cost structure, risk, and opportunity.

Insights and Decision Support

• Develop learning-curve and scaling frameworks that quantify expected cost improvements across successive product generations and manufacturing expansions.
• Conduct sensitivity and scenario analyses to assess the impact of design changes, production scaling, introduction of new capabilities, and supply-chain dynamics on total cost.
• Analyze cost trends, anomalies, and one-time events to distinguish between structural and transient cost drivers.
• Provide data-driven recommendations to drive cost reduction, operational efficiency, and improved market competitiveness.
• Support internal pricing and contracting discussions by confirming that proposed pricing and commercial terms align with established cost targets and financial assumptions, and by quantifying impacts when they do not.

Reporting and Communication

• Develop and maintain reporting tools that clearly communicate cost forecasts, trends, and key drivers to executive leadership.
• Translate complex cost analyses into concise and actionable insights that support strategic decision-making.
• Prepare and deliver presentations, summaries, and visualizations that convey cost performance, forecast accuracy, and improvement opportunities.
• Ensure cost transparency in internal and customer-facing reporting, including support for cost-plus and open-book contracting frameworks.
• Collaborate with FP&A, Accounting, and Strategy to maintain consistent cost narratives across internal and external communications.

Team Leadership

• Build and lead a small team responsible for product cost forecasting and analysis, providing mentorship, structure, and technical direction.
• Foster a culture of rigor, transparency, and continuous improvement in cost modeling and forecast accuracy, aligned with the Kairos Power culture and mission.
• Establish clear development paths for team members as the cost forecasting function expands to support commercial deployment.
• Collaborate with leaders across Engineering, Finance, and Manufacturing to reinforce shared ownership of cost outcomes and cross-functional problem-solving.
• Encourage innovation in modeling methods, data integration, and visualization to enhance both accuracy and usability of cost information.

Other duties as assigned

Qualifications

• Bachelor’s degrees in Engineering, Corporate Finance or related discipline required; advanced degree in Engineering or Corporate Finance preferred
• 10+ years of experience in cost forecasting, cost engineering, or manufacturing finance, including a minimum of five years in a leadership role
• Experience at a manufacturer or hardware developer within the past five years
• The successful candidate will have a proven track record of developing and managing cost forecasting systems for complex engineered products or large-scale manufacturing programs.
• Strong analytical skills and proficiency in developing detailed cost and financial models are essential.
• The role requires the ability to integrate technical, operational, and financial data to support decision-making, along with exceptional communication skills and experience presenting to executive stakeholders.
• Familiarity with ERP systems such as NetSuite or Oracle and advanced Excel modeling capability are expected.
• Candidates must be comfortable operating in a fast-paced, cross-functional environment and managing multiple priorities simultaneously.
• An advanced degree in business administration, engineering, data science, economics, or a related field is preferred.
• Candidates with extensive experience leading progressively responsible roles in cost estimation, product cost management, or manufacturing economics will be strongly preferred, particularly those who have built or scaled cost forecasting functions in complex manufacturing or capital project environments.
• Experience in clean energy, aerospace, advanced manufacturing, or other capital-intensive project environments is highly valuable.
• Knowledge of cost accounting principles, variance analysis, and open-book or cost-plus contracting models is preferred.
• Familiarity with learning-curve modeling, sensitivity analysis, and cost scaling methodologies is an advantage.
• Proficiency with data analysis and visualization tools such as Python, Power BI, or Tableau is desirable.
• Candidates with demonstrated success leading cross-functional cost management initiatives and influencing decision-making in dynamic, fast-paced organizations will be especially well suited for this role.

Knowledge, Skills, and Abilities

• Excellent written and verbal communication skills and strong organizational skills
• Strong analytical and problem-solving skills and attention to detail
• Ability to work with highly collaborative team and proven team player working with various teams
• Ability to solve problems quickly and efficiently
• Prioritizes and ensures safety of oneself and others
• Ability to proactively collect, manage and transfer knowledge
• Ability to seek different and novel ways to create efficiencies when working on problems, challenges and issues

Physical Demands

• Remaining in a stationary position, often standing, or sitting for prolonged periods
• Moving about to accomplish tasks or moving from one worksite to another
• Communicating with others to exchange information

Environmental Conditions

• General office environment
• Assessing the accuracy, neatness and thoroughness of the work assigned
• High-concentration, demanding and fast-paced

Safety and PPE

• Reading and interpreting hazardous warning signs
• Reporting issues with equipment or unsafe conditions

Travel

• If candidate not physically located in Albuquerque, NM, travel is up to 20-30% 

Additional Requirements

• Requires occasional working weekends
• Requires occasional schedule flexibility
• Requires occasional extended hours to support launch and critical project timelines

The salary for this position is $209,400 to $261,800 for employees working onsite at our Alameda, CA headquarters. The range provided in this job posting represents the typical range or starting rate of candidates hired in California. Factors that maybe used to determine your actual salary may include your education, experience, knowledge, skills, abilities, the market data for your work location, and a comparison to other employees already in the role. 

#LI-Onsite

Why This Role Matters

Pacific Fusion (PF) is seeking a Project Engineer to support a large, complex, first-of-a-kind R&D and light industrial facility.

The successful candidate will be responsible for supporting the project team in executing the construction execution plan—including maintaining a strong on-site presence, managing RFIs and submittals, reviewing and approving change orders, tracking project risks, and validating contractor forecasts and progress—while facilitating key design, construction, commissioning, and turnover milestones.

The role is embedded on site and works day-to-day with the Construction Manager and General Contractor (GC). The Project Engineer serves as a critical owner-side execution and commercial control resource for preconstruction and construction activities, supporting field coordination, risk and contingency management, scope control, quality closeout, and disciplined cost and schedule performance.

What You'll Do

• Maintain daily on-site presence supporting construction activities.  Monitor progress, identify issues early, and escalate proactively. Coordinate between PF, GC, designers, and subcontractors. Participate in safety walks, inspections, and coordination meetings.  Support punch list, quality closeout, and turnover readiness. 
• Manage RFI workflows and drive timely resolution. Lead owner-side review and approval of change orders, validating entitlement, scope, cost, and schedule impacts.
• Maintain the project risk register and partner with the PF Cost Engineer to manage contingency usage and forecasting. Review contractor cost reports and update the owner’s Estimate at Completion (EAC), proactively identifying emerging risks.
• Support schedule execution, progress verification, commissioning coordination, and turnover readiness, while providing general project management support and acting as a delegate to the Construction Manager as needed.

What You Bring

• Bachelor’s degree in Engineering, Construction Management, or a related technical field (or equivalent hands-on construction experience in lieu of a degree)
• 3–7+ years of experience in project engineering, field engineering, or construction management on commercial, industrial, or large capital projects
• Direct experience managing RFIs, submittals, and construction documentation
• Experience reviewing and validating change orders, including scope, cost, and entitlement considerations
• Strong understanding of construction means and methods
• Ability to work independently in a fast-paced, startup or low-process environment
• Comfortable working full-time on active construction sites

Bonus Points For

• General Contractor or subcontractor background with hands-on field experience
• Exposure to risk tracking, contingency management, or cost forecasting
• Experience on complex, industrial, high-tech, or first-of-a-kind facilities
• Startup or scale-up company experience
• OSHA 30 certification
• Proficiency with common construction project management platforms such as Procore, Autodesk Construction Cloud (ACC), BIM 360, Primavera P6, MS Project or similar tools

Barbaricum is seeking an experienced Joint Terminal Attack Controller (JTAC) Instructor to join our dedicated team in direct support of the United States Air Force Special Operations Command (AFSOC) as a JTAC Instructor / Simulator Operator.

This role focuses on providing advanced JTAC training to Special Tactics Squadron (STS) personnel as well as supporting training with CAS simulators utilizing Live, Virtual, and Constructive (LVC) environments.  Previous CAS Simulator Experience helpful but is not a requirement for the position; all required simulator training can be provided after hire.    

This position offers relocation assistance and is bonus eligible after personnel complete their onboarding period.  Candidates must be comfortable working in expeditionary conditions and high-tempo training environments. 

Core Responsibilities:

• Deliver JTAC, JTAC-I, and JTAC-SEE instruction in classroom, field, and simulator-based settings.
• Operate, maintain, and troubleshoot simulator systems including JTC-TRS and other government-furnished systems.
• Support and track JTAC progression through training records, qualification folders, and reporting documentation.
• Implement and update CAS and SUAS training scenarios in accordance with service doctrine and unit guidance.
• Perform software updates, scenario loads, and database management for simulators as certified.
• Provide simulator calibration, system diagnostics, and scripted software execution in coordination with help desks.
• Produce monthly simulator usage and status reports and communicate discrepancies to unit leadership.
• Assist with range and air asset scheduling, deconfliction, and inter-unit coordination for live training execution.
• Act as Opposing Force (OPFOR) and deliver instruction in complex tactical environments.
• Support no-notice evaluations, sustain training documentation, and maintain unit academics programs.
• Participate in exercises, conferences, planning sessions, and symposiums.
• Provide emergency response support during training activities, including medical evacuation advisories.
• Operate JTAC-related communications, safety, and mobility systems, including BAO kits, SUAS platforms, and tactical vehicles.

Qualifications:

• Active DoD Secret clearance with ability to obtain Top Secret; current TS/SCI highly preferred.
• JTAC Instructor (JTAC-I) qualified and current within the last 4 years.
• Must have held JTAC-I and/or JTAC-SEE rating.
• Minimum of 2 years of SOF background, or equivalent augmentation in operational deployments as a JTAC.
• Proficient in written and spoken English.
• Demonstrated ability to work in austere field environments under variable weather and operational conditions.
• Experience operating standard office systems and military automation platforms in both classified and unclassified settings.
• Familiarity with Microsoft Office suite and ability to produce training briefs, instructional content, and technical reports.
• Willingness to work long hours, including nights, weekends, and holidays in support of mission training cycles.
• Ability to travel regularly, including OCONUS, with overnight stays and operations in temporary facilities.
• Experience operating radios (PRC series, MBITR), NVGs, IR devices, and other JTAC-specific equipment.

Company Overview

Kairos Power, is a new nuclear energy technology and engineering company whose mission is to enable the world’s transition to clean energy, with the ultimate goal to dramatically improve people’s quality of life while protecting the environment. This goal will be accomplished through the commercialization of the fluoride-salt-cooled, high-temperature reactor (FHR) that can be deployed with robust safety, affordable costs, and flexible operation to accommodate the expansion of variable renewables.

Job Summary 

Kairos Power is seeking a Facilities Mechanical Technician with broad building and mechanical expertise supporting industrial, commercial and/or R&D facilities. This position will be located at the Kairos Power Southwest facility in Albuquerque, New Mexico and will report to the Facilities Department. The Facilities Maintenance Technician will support a variety of facilities maintenance tasks across the site including performing inspections, installations, repairs, replacements, and other general tasks on existing facility infrastructure. The role will also conduct testing, operations, troubleshooting, and mechanical work in support of the engineering teams onsite.  

The ideal candidate will have hands-on experience performing/coordinating maintenance on boilers, chillers, and HVAC systems and experience working with R&D test equipment, manufacturing equipment, and other commercial building systems including Building Management Systems (BMS), fire protection, fire alarms, access control, security cameras, and security alarms. 

Responsibilities

• Provide technical support for required mechanical tasks in collaboration with internal facilities, construction, engineering and project teams
• Complete preventative and corrective maintenance/troubleshooting on site Boilers, Chillers, HVAC, and other mechanical systems (plumbing, compressed air, etc.)
• Support the scope and coordination with facilities contractors to complete required projects/work on site
• Maintain a detailed understanding and knowledge of the building’s mechanical, electrical, and plumbing systems
• Support the construction and operations of Boilers, Chillers, HVAC and other building systems equipment in support of R&D testing at the facility
• Development of operating standards and Standard Operating Procedures (SOPs) for mechanical equipment (Boilers, Chillers, Reverse Osmosis (RO), HVAC, etc.)
• Perform lockout/tagout to isolate components and de-energize equipment.
• Ability to test, troubleshoot, and repair malfunctioning systems, apparatus, or components by using basic electrical test equipment (voltmeters, ohmmeters)
• Carry out skilled maintenance tasks encompassing inspections, operations, installation, and troubleshooting of building equipment such as bridge cranes and dock equipment
• Manage small facilities projects, work orders, and preventive maintenance tasks using computerized management maintenance systems (CMMS) and app-based systems
• Document and communicate results of preventive maintenance tasks including visual inspections, defect detection, hazard identification, and code compliance
• Analyze, prepare, and deliver reports; fill out preventative maintenance requests, deficiency reports, and work orders using a computer and other equipment.
• Provide effective and timely customer service to internal clients and team members.
• Comply with national, local, and company safety codes, procedures, policies and practices.
• Participate in emergency response activities related to mechanical system failures or facility outages, including on-call or after-hours support as required.
• Support regulatory inspections, audits, and corrective action implementation related to mechanical systems and facilities compliance.
• Assist with lifecycle planning, equipment replacement evaluations, and maintenance optimization initiatives.
• Other duties as assigned.

Qualifications

• High school diploma, GED, or equivalent and completion of related accredited program or equivalent work experience in industrial or commercial maintenance, with emphasis on mechanical and general building work
• 3+ years of experience working with HVAC, plumbing, boilers, chillers, or related systems in industrial, commercial and/or R&D facilities
• Certifications/Licenses for completing work on Boilers, Chillers, or refrigerant systems in the state of New Mexico.
• Experience testing, commissioning, troubleshooting, and repairing mechanical equipment.
• Experience in reading plumbing and mechanical diagrams, drawings, schematics, & specifications.
• Experience with Building Management System (BMS), Building Automation System (BAS), Energy Management System (EMS), and/or HVAC remote operation systems troubleshooting.
• Must have experience establishing a safe workplace utilizing NFPA 70E as a safety standard (LOTO etc.); intermediate knowledge of OSHA and EPA regulations, and adherence to applicable Environment, Health, and Safety (EHS) laws and regulations is also required

Knowledge, Skills & Abilities

• Ability to maintain, inspect, operate, install, repair, replace, test, and troubleshoot mechanical, plumbing, and other mechanical system components.
• Ability to oversee mechanical commissioning, testing, and maintenance activities performed by consultants or mechanical contractors.
• Customer service and interpersonal skills necessary to interact effectively in writing and verbally with technical, administrative, and management personnel.
• Ability to work effectively independently and as a team member.
• Strong computer-based skills including ability to utilize software to create and update work orders, send and receive e-mails and internal messages, participate in computer-based training, web-based meetings, and utilize internal company applications.
• Ability to operate motor vehicles and be insured on company vehicles
• Ability to work with highly collaborative team
• Ability to solve problems quickly and efficiently
• Prioritizes and ensures safety of oneself and others
• Ability to proactively collect, manage and transfer knowledge
• Ability to seek different and novel ways to create efficiencies when working on problems, challenges and issues
• Knowledge of applicable building codes, mechanical codes, and industry standards relevant to facility mechanical systems.
• Ability to prioritize and manage multiple maintenance tasks in a dynamic operational environment.
• Ability to recognize abnormal equipment conditions and escalate issues appropriately to minimize downtime and safety risk.

Physical Conditions 

• Setting up and transferring temporary structures (e.g. scaffolding, ladders)
• Moving self in different positions to accomplish tasks in various environments including tight and confined spaces
• Remaining in a stationary position, often standing, or sitting for prolonged periods
• Moving about to accomplish tasks or moving from one worksite to another
• Adjusting, moving, transporting, installing, positioning, or removing objects up to 50 pounds in all directions
• Communicating with others to exchange information
• Operating motor vehicles, heavy equipment or machinery
• Use hand tools
• Repetitive assembly operations of manufacturing test fixtures and test setups in collaboration with engineering and manufacturing teams 

Environmental Conditions

• General office environment
• Low temperatures
• High temperatures
• Outdoor environment or elements such as precipitation and wind 
• Noisy environments
• Small and/or enclosed spaces
• Odors or fumes from chemicals or chemical reactions
• Elevated heights
• Assessing the accuracy, neatness and thoroughness of the work assigned
• High-concentration, demanding and fast-paced
• Exposure to moving mechanical parts and energized or pressurized systems during inspection, maintenance, and testing activities.
• Variable lighting conditions in areas such as mechanical rooms, rooftops, or equipment enclosures.

Safety and PPE 

• Reading and interpreting hazardous warning signs
• Manipulating, cleaning and disposal of hazardous materials
• Reporting issues with equipment or unsafe conditions
• Color identification: detecting, distinguishing, recognizing and identifying colors
• Wearing proper PPE, to include face mask, face shields, gloves, safety shoes, etc.
• Compliance with lockout/tagout, confined space, fall protection, and hazard communication procedures when performing assigned work.

Travel 

• Some travel may be required, up to 5% 

Certification

• Holds certifications or licensure for operations and maintenance of boilers in the state of New Mexico
• Preferred but not required to be certified to handle refrigerant in the state of New Mexico
• Capable of obtaining forklift and boom lift certification
• Completion of OSHA 30 Construction Safety Training preferred
• First Aid/CPR/AED Training is a plus 

Additional Requirements

• Occasionally requires overtime 
• Seldom requires working weekends 
• Occasionally requires schedule flexibility
• Occasionally requires extended hours to support critical project timelines

#LI-Onsite

Job Summary

Kairos Power is seeking a highly motivated Regulatory Compliance Engineer III with a background in nuclear operations. In this role, you will collaborate with engineering operations, site integration, design, safety analysis, and licensing teams to develop facility operating solutions that align with Kairos Power’s Mission and comply with Nuclear Regulatory Commission (NRC) regulations, license conditions and licensing commitments.  Additionally, you will be a key interface for communications between Kairos Power facility operations and the NRC staff providing oversight of the facility.

This role will be onsite in Oak Ridge, TN. 

Responsibilities

• Provide regulatory guidance and support to the operations team to develop facility operation strategies and implement programs and procedures and to ensure compliance with NRC regulations, license conditions and commitments is maintained.
• Serve as the point of contact for NRC personnel performing oversight of facility operations.
• Lead preparation for, performance of and responses to NRC inspections of facility operations.
• Maintain facility Technical Specifications, FSAR and other licensing basis documents.
• Support 10 CFR 50.59 and 10 CFR Part 21 screenings and evaluations.
• Identify potential regulatory risks and develop mitigation strategies.
• Perform event reportability determinations and develop NRC event notifications in accordance with regulatory requirements and license conditions.
• Prepare correspondence with the NRC including periodic reports, responses to inspection findings, requests for information, licensee event reports, and operator licensing applications.
• Other duties as assigned.

Qualifications

• B.S. degree in Nuclear , Mechanical, Electrical, Civil Engineering, or related field.
• 3+ years of experience in nuclear facility operations, with NRC-licensed operator (SRO or RO license) experience preferred.
• Regulatory compliance experience is not required – we are willing to provide training, experience interacting directly with the NRC is preferred.
• Experience developing compliance-based programs and procedures - Procedure Professionals Association (PPA) certification preferred.

Knowledge, Skills & Abilities

• Understanding of NRC regulations (10 CFR Part 50, 10 CFR Part 21, etc.) and regulatory guidance (regulatory guides, inspection procedures, etc.).
• Demonstrated technical writing ability.
• Knowledge of operational protocols and implementation of operating procedures.
• Demonstrated coordination skills including advisory, relationship and stakeholder management skills fit to handle a small / start-up environment.
• Demonstrated ability to earn the trust of team members and management.
• Eager to learn and develop skills in nuclear compliance, with a proactive and growth-oriented mindset.
• Entrepreneurial, adaptable and collaborative, and fully committed to Kairos Power’s mission.
• Strong team player with exceptional communication and interpersonal skills, effective at all organizational levels.
• Proactive and accountable, driven to meet milestones while embracing challenges with respect and determination.
• Ability to work with highly collaborative team.
• Ability to problem solve quickly and efficiently.
• Ability to proactively collect, manage and transfer knowledge.
• Ability to seek different and novel ways to create efficiencies when working on problems, challenges and issues.
• Prioritizes and ensures safety of oneself and others.

Physical Demands

• Ascending or descending ladders, stairs, scaffolding, ramps, scissor lifts, articulated boom lifts and the like.
• Setting up and transferring temporary structures (e.g. scaffolding, ladders).
• Moving self in different positions to accomplish tasks in various environments including tight and confined spaces.
• Remaining in a stationary position, often standing or sitting for prolonged periods.
• Moving about to accomplish tasks or moving from one worksite to another.
• Adjusting, moving, transporting, installing, positioning, or removing objects up to 30 pounds in all directions.
• Communicating with others to exchange information.

Environmental Conditions

• General office environment.
• Outdoor environment or elements such as precipitation and wind.
• Noisy environments.
• Assessing the accuracy, neatness and thoroughness of the work assigned.
• High-concentration, demanding and fast-paced.
• Manufacturing/Industrial Environments.
• Radiological/Controlled Environments.

Safety and PPE

• Reading and interpreting hazardous warning signs.
• Reporting issues with equipment or unsafe conditions.
• Color identification: detecting, distinguishing, recognizing and identifying colors.
• Wearing proper PPE, to include face mask, face shields, gloves, safety shoes, etc.

Travel

• Some travel may be required, up to 35%

Additional Requirements

• Requires schedule flexibility occasionally.
• Requires non-standard work-week hours occasionally,
• Requires extended hours to support launch and critical project timelines occasionally.

• Onsite: #LI-Onsite

Job Summary 

The Inventory Management System (IMS) team is seeking a highly motivated and passionate Engineer to join our efforts in designing, building, and commissioning high-temperature skids for molten salt systems. The ideal candidate will have a strong foundation in process, chemical, and mechanical engineering, with the ability to apply these skills to high-temperature design challenges. 

 In this role, you will contribute to the development of critical process systems for the Hermes reactor, our first-of-a-kind low-power nuclear demonstration reactor. As a key member of the IMS team, you will assist in designing, commissioning, and operating components to manage and control the reactor’s molten salt coolant inventory. The position requires an aptitude for chemical engineering, systems integration, and industrial or pilot-scale system deployment. You will collaborate closely with mechanical design, plant layout, piping, instrumentation, and operations teams to integrate and optimize these systems. 

Responsibilities  

• Support design of high temperature piping loops, vessels, heaters, and instruments to manage the Hermes molten salt coolant inventory.
• Perform engineering calculations to support defining hydraulic, thermal, or other design parameters such as pipe size, required pump head, heat loss, hydraulic losses in a pipe loop, etc.
• Lead the design and construction of test platforms, including component prototypes, scaled system demonstrations, and engineering studies to inform IMS system design and performance.
• Develop and document engineering calculations, technical studies, and design rationale through clear and concise technical reports, memos, and presentations.
• Support system commissioning, startup, and operational readiness activities, including procedure development and execution.
• Assist with requirements definition, design verification, and validation activities to ensure IMS systems meet functional and regulatory expectations.
• Leverage expertise in Process Flow Diagrams (PFDs) and Piping and Instrumentation Diagrams (P&IDs) to communicate and collaborate effectively across teams.
• Contribute to Failure Modes and Effects Analysis (FMEA) and Hazard and Operability (HAZOP) studies, ensuring robust safety and performance across system interfaces.
• Work cross-functionally with mechanical, instrumentation, controls, and operations teams to integrate and optimize IMS designs in alignment with reactor requirements. 
• Other duties as assigned. 

Qualifications  

• Bachelor’s or Master’s degree in Chemical, Mechanical, Nuclear Engineering, or a related field with 3+ years of relevant experience in process/system design or related roles.
• Experience designing systems for high-temperature processes, molten salts, liquid metals, hazardous chemicals, or petrochemical processes is preferred.
• Demonstrated ability to bring hardware design projects to completion and through commissioning, for industrial-scale systems or lab test stands.
• Familiarity with ASME vessel and piping codes is a plus.
• Experience with SolidWorks or other CAD software desired.
• Demonstrated capacity for autonomous problem-solving and willingness to own a wide range of technical and non-technical tasks. 

Knowledge, Skills & Abilities 

• Proficient in interpreting PFDs, P&IDs, and process equipment datasheets, with the ability to translate these into functional design and implementation plans.
• Knowledge of HazOp process and demonstrated experience designing processes with a safety-first mindset to create robust systems. Prioritizes and ensures safety of oneself and others.
• Knowledge of system commissioning practices, startup sequencing, and operational troubleshooting for process systems.
• Ability to work with highly collaborative team with excellent verbal, written communication/presentation, and interpersonal skills. Ability to proactively collect, manage and transfer knowledge.
• Ability to quickly and effectively work with manufacturing/assembly teams to pivot or troubleshoot when hardware build issues are discovered while maintaining delivery schedule. 

Physical Conditions  

• Remaining in a stationary position, often standing or sitting for prolonged periods.
• Adjusting, moving, transporting, installing, positioning, or removing objects up to 30 pounds in all directions.
• Occasionally moving self in different positions to accomplish tasks in various environments including tight and confined spaces (laboratory/shop environment). 

Environmental Conditions  

• General office environment.
• High-concentration, demanding and fast-paced environment.
• Occasional laboratory or shop environment exposure (loud noises, PPE required, chemical fumes possible). 

Safety and PPE 

• Reading and interpreting hazardous warning signs.
• Reporting issues with equipment or unsafe conditions.
• Wearing proper PPE, to include face mask, face shields, gloves, safety shoes, etc. 

Travel  

• Some travel may be required, up to 20%. 

Additional Requirements  

• Requires occasional extended hours to support critical project timelines. 

The salary range for this position is $106,300 to $125,100 for employees working onsite at our Alameda, CA headquarters. The range provided in this job posting represents the typical range or starting rate of candidates hired in California. Factors that maybe used to determine your actual salary may include your education, experience, knowledge, skills, ability and the market data for your work location, and a comparison to other employees already in the role.

#LI-Onsite

Job Summary 

Reporting to the Fuel Operations Manager, this position contributes to the development and production of pebble fuel for Kairos Power’s fluoride-salt-cooled, high-temperature reactor. The individual selected for this position will help construct, operate, and maintain and assemble equipment and work with engineers to execute the annular fuels R&D program. As part of an operations team, the individual selected for this position will run the manufacturing process for the facility, as well as implement other mechanical assembly, support and operation as required by code or regulation. This individual thrives in a fast-paced, positive environment, which values continuous improvement and accountability.

Responsibilities

Mechanical Assembly and Troubleshooting 

• Carefully assembling mechanical components according to detailed instructions and blueprints.
• Aligning and positioning parts to ensure proper fit and function.
• Using hand tools, power tools, and specialized fixtures to secure components.
• Checking for tolerances and quality control during assembly.
• Performs troubleshooting of malfunctioning equipment and develops solutions to restore equipment to operation.
• Assists engineering staff in developing the critical operations program and critical spares list.
• Read and interpret design plans, and prepare layouts for assembling components
• Participate in engineering reviews and studies to support future equipment and facility upgrades.

Facility Operations

• Execute the manufacturing processes associated with the annular fuels program.
• Support the day-to-day operations of the facility; Startup, run, and shutdown heavy machinery and auxiliary equipment.
• Assist in performing and evaluating both destructive and non-destructive tests on annular fuel. Document results under the QA program.
• Identify equipment issues, provide recommended corrective actions, and participate in root cause analysis as necessary.
• Perform lockout-tagout of mechanical and electrical equipment.
• Work with hazardous chemicals and radiological materials within gloveboxes, fume hoods, or other engineered containment enclosures.
• Use tools such as drills, grinders, calipers, and presses, etc.
• Operate mobile equipment such as forklifts, loaders, scissor lifts, and aerial lifts.
• Understand and adhere to all safety rules and regulations.
• Other duties as assigned.

Qualifications

• Combination of education and/or work experience equivalent to 6+ years in mechanical assembly, pipefitting, or mechanical trades. Experience in maintenance, fabrication shops, manufacturing, or process plant work experience preferred.
• High school diploma or GED certificate required. Associates degree in Mechatronics, Millwright, or completion of trade school/vocational certification program preferred.
• Experience working from procedures, P&IDs, construction drawings, work permits, and technical manuals.
• Experience developing or contributing to work instructions and standard operating procedures preferred.
• Certification in forklift or aerial lift operation (or ability to obtain).

Knowledge, Skills & Abilities

• Thorough knowledge of mechanical parts like hydraulics, motors, welding, and belt systems and how to work safely in those environments
• Strong mechanical aptitude and experience in a heavy manufacturing environment.
• Ability to read and interpret blueprints and schematics.
• Strong problem-solving and time management skills
• Capacity and willingness to learn and perform new duties or more complex assignments.
• Ability to work within a highly collaborative team
• Ability to solve problems quickly and efficiently
• Prioritizes and ensures safety of oneself and others
• Ability to proactively collect, manage, and transfer knowledge
• Ability to seek different and novel ways to create efficiencies when working on problems, challenges, and issues

Physical Demands

• Moving self in different positions to accomplish tasks in various environments including tight and confined spaces
• Moving about to accomplish tasks or moving from one worksite to another
• Adjusting, moving, transporting, installing, positioning, or removing objects up to 40 pounds in all directions
• Communicating with others to exchange information
• Operating motor vehicles, heavy equipment, or machinery
• Repetitive assembly operations of manufacturing test fixtures and test setups in collaboration with engineering and manufacturing teams 
• Use hand tools

Environmental Conditions 

• High temperatures occasionally
• Noisy environments occasionally
• Lab or Manufacturing Environment
• Odors or fumes from chemicals or chemical reactions
• Assessing the accuracy, neatness and thoroughness of the work assigned
• High-concentration, demanding and fast-paced
• Rigging activities or environments involving heavy load movement
• Elevated heights
• Radiological or Controlled Environment

Safety and PPE

• Reading and interpreting hazardous warning signs
• Reporting issues with equipment or unsafe conditions
• Wearing proper PPE, to include face mask, face shields, respirators, gloves, safety shoes, etc.

Certification

• Certification in forklift or aerial lift operation (or ability to obtain).

Additional Requirements

• Occasionally requires working weekends
• Occasionally requires schedule flexibility
• Occasionally requires non-standard work-week hours
• Occasionally requires extended hours to support launch and critical project timelines

#LI-Onsite

Job Summary 

Kairos Power is seeking a highly motivated Senior Electron Beam Welding Engineer that will be responsible for in-house electron beam welding (EBW) capability development and technology maturation. In this role, you will work on the Welding Development team to assist in the advancement and implementation of welding and manufacturing capabilities. The candidate will partner with design, testing, materials, modeling & simulation, and reliability engineers to develop weld joint design, weld techniques, weld specifications, and inspection methods needed for welded KP-FHR and test platform assemblies.

Responsibilities

Procedure Development & Qualification

• Design, develop, and maintain EBW procedures and supporting documentation (WPS/PQR) to meet material, joint, and quality requirements in compliance with applicable codes, standards (e.g., AWS, ASME, API), and regulatory expectations.
• Develop and execute weld qualification plans, including test coupons and validation trials, in coordination with quality and materials teams
• Anticipate future welding needs by aligning EBW procedures and qualification strategies with evolving product designs, manufacturing processes, and regulatory demands.

Quality Assurance & Process Optimization

• Oversee and review EBW inspections to verify compliance with design specifications and applicable quality standards.
• Analyze weld test data to identify trends, determine root causes of defects, and implement corrective actions to enhance welding performance and reliability.
• Lead continuous improvement initiatives to optimize EBW processes, increase efficiency, reduce cost, and maintain high-quality output.

Collaboration & Training

• Partner with design engineers, production teams, and key stakeholders to integrate EBW processes into the manufacturing workflow effectively.
• Provide hands-on training and mentorship to welding technicians and operators on EBW techniques, safety protocols, and industry best practices.

Technical Documentation & Reporting

• Develop and maintain comprehensive technical documentation, including process instructions, work procedures, and detailed reports.
• Ensure accurate recordkeeping of EBW procedures, inspection results, and quality control data to support traceability and continuous improvement.

Equipment Ownership & Maintenance

• Ensure performance, reliability, and availability of EBW systems, including high-vacuum chambers, beam control units, and power supplies.
• Monitor and calibrate critical parameters (e.g., beam alignment, focus, power output, vacuum integrity) to maintain process consistency and compliance with specifications.
• Lead maintenance and upgrade initiatives, including preventive planning, troubleshooting, vendor coordination, and system improvements to enhance automation and long-term equipment reliability.

Other Duties as Assigned

Qualifications

• Bachelor’s degree or higher in Welding Engineering, Materials Science, Mechanical Engineering, or a related technical field
• Minimum 5 years of welding engineering experience, with substantial hands-on experience in EBW required
• Experience with weld inspection methods, including both destructive testing and non-destructive examination (NDE) techniques
• Hands-on experience working with austenitic stainless steels, carbon steels, piping systems, and pressure vessels
• Experience leading cross-functional projects or mentoring junior engineers and technicians is preferred.
• Experience with manual and CNC machining operations is preferred

Knowledge, Skills & Abilities

• Strong knowledge of EBW processes, high-vacuum systems, and high-voltage equipment operation
• Proficient in reading and interpreting complex engineering and assembly drawings, including weld symbols and geometric dimensioning & tolerancing (GD&T)
• Familiarity with ASME Boiler and Pressure Vessel Code and AWS structural welding standards
• Skilled in using CAD software such as SolidWorks for part modeling and drawing generation
• Proficient with computers and digital tools used in technical documentation, data analysis, and process development
• Familiarity with the calibration, preventive maintenance, and troubleshooting of EBW systems and associated instrumentation.
• Strong problem-solving skills and ability to drive continuous improvement through data-driven analysis and collaboration
• Proven ability to manage multiple priorities in a fast-paced, agile manufacturing or development environment
• Excellent verbal and written communication skills; able to collaborate effectively across engineering, production, and quality teams
• Ability to collect, manage, and transfer technical knowledge across teams or documentation systems
• Committed to fostering a safe, inclusive, and high-performing workplace
• Ability to work with highly collaborative team.
• Ability to solve problems quickly and efficiently.
• Prioritizes and ensures safety of oneself and others.
• Ability to seek different and novel ways to create efficiencies when working on problems, challenges and issues.

Physical Demands

• Ascending or descending ladders, stairs, scaffolding, ramps, scissor lifts, articulated boom lifts and the like
• Setting up and transferring temporary structures (e.g. scaffolding, ladders)
• Moving self in different positions to accomplish tasks in various environments including tight and confined spaces
• Remaining in a stationary position, often standing, or sitting for prolonged periods
• Moving about to accomplish tasks or moving from one worksite to another
• Adjusting, moving, transporting, installing, positioning, or removing objects up to 50 pounds in all directions
• Communicating with others to exchange information
• Operating motor vehicles, heavy equipment or machinery
• Use hand tools
• Repetitive assembly operations of manufacturing test fixtures and test setups in collaboration with engineering and manufacturing teams 

Environmental Conditions

• Low temperatures
• High temperatures
• Outdoor environment or elements such as precipitation and wind 
• Noisy environments
• Small and/or enclosed spaces
• Odors or fumes from chemicals or chemical reactions
• Elevated heights
• Accessing the accuracy, neatness and thoroughness of the work assigned
• High-concentration, demanding and fast-paced
• General office environment
• Manufacturing/Industrial Environment

Safety and PPE

• Reading and interpreting hazardous warning signs
• Wearing proper PPE, to include face mask, face shields, gloves, safety shoes, etc.
• Reporting issues with equipment or unsafe conditions

Travel

• Some travel may be required (up to 20%) to other Kairos Power offices or external suppliers

Additional Requirements

• Occasionally requires overtime
• Occasionally requires working weekends 
• Occasionally requires schedule flexibility
• Occasionally requires non-standard work-week hours 
• Occasionally requires extended hours to support launch and critical project timelines

#LI-Onsite

Job Summary 

Kairos Power is seeking a highly motivated fabricator with expertise relevant to fabrication of piping systems. In this role you will contribute to successful completion of piping systems for the various systems of our reactors. This role requires in position and out of position welding. You will be responsible for meeting timelines and increased improvement of the pipe welding capabilities. This includes manual tig welding as well as orbital welding. The candidate must have knowledge of infrastructure, setup, operation, and maintenance requirement for advanced shop equipment. Candidate shall have knowledge of modern fabrication techniques, and proven record of successful cross-functional collaboration. Candidate ideally takes pride in their craftsmanship, organization, and attention to detail. We offer a fast moving and exciting environment.

Responsibilities 

• Fabricate and assemble piping systems to meet engineering and print specifications.
• Perform high-quality TIG and orbital welding on a variety of materials and pipe schedules.
• Interpret and work from isometric drawings, blueprints, and technical specifications.
• Provide fast turn-around prototypes for engineering development and testing.
• Collaborate closely with Engineering teams to problem solve fabrication issues and execute work request.
• Propose optimal/innovative fabrication techniques for given jobs.
• Participate as a team member on large-scale fabrication projects, ensuring timelines and quality standards are met.
• Fabricate piping systems to meet print requirements.
• Conduct training occasionally on machine capability and best practices to enhance fabrication of piping systems.
• Maintain current welding certifications and documentation in accordance to company and ASME standards.
• Ensure all work complies with applicable safety standards, procedures, and codes.
• Maintain equipment, tools, and the fabrication workspace in safe and reliable condition.
• Other duties as assigned

Qualifications

• High School Diploma or GED and 3+ years related experience and/or training
• 1-3 years working in a fabrication/welding shop desired
• GTAW experience involving variety of materials including tubing to schedule 160 pipe
• Ability to pass 6G super coupon weld certification
• Experience with manual tools required
• Experience with Manual machining (Lathe and Mill) desired
• Experience with 3D CAD software desired
• Experience working with Stainless material and vessel fabrication desired

Knowledge, Skills & Abilities 

• Knowledge of ASME Boiler and Pressure Vessel Code
• Ability to read and understand isometric drawings for piping
• Ability to work with highly collaborative team
• Ability to solve problems quickly and efficiently
• Prioritizes and ensures safety of oneself and others
• Ability to proactively collect, manage and transfer knowledge
• Ability to seek different and novel ways to create efficiencies when working on problems, challenges and issues

Physical Demands

• Ascending or descending ladders, stairs, scaffolding, ramps, scissor lifts, articulated boom lifts and the like
• Moving self in different positions to accomplish tasks in various environments including tight and confined spaces
• Remaining in a stationary position, often standing, or sitting for prolonged periods
• Moving about to accomplish tasks or moving from one worksite to another
• Adjusting, moving, transporting, installing, positioning, or removing objects up to 50 pounds in all directions
• Communicating with others to exchange information
• Operating motor vehicles, heavy equipment or machinery
• Use hand tools
• Repetitive assembly operations of manufacturing test fixtures and test setups in collaboration with engineering and manufacturing teams 

Environmental Conditions 

• Low temperatures
• High temperatures
• Outdoor environment or elements such as precipitation and wind
• Noisy environments
• Small and/or enclosed spaces
• Odors or fumes from chemicals or chemical reactions
• Elevated heights
• Assessing the accuracy, neatness and thoroughness of the work assigned
• High-concentration, demanding and fast-paced
• Manufacturing/Industrial Environments

Safety and PPE 

• Reading and interpreting hazardous warning signs
• Manipulating, cleaning and disposal of hazardous materials
• Reporting issues with equipment or unsafe conditions
• Wearing proper PPE, to include face mask, face shields, gloves, safety shoes, etc.

Certification

• Capable of obtaining forklift and boom lift certification 

Additional Requirements 

• Occasionally requires overtime
• Occasionally requires working weekends
• Occasionally requires schedule flexibility 
• Occasionally requires non-standard work-week hours 
• Occasionally requires extended hours to support launch and critical project timelines 

#LI-Onsite

Job Summary 

Kairos Power is seeking a highly motivated Operator to support our plant operations and testing team. In this role, you will contribute to the development and deployment of the company’s engineering testing capabilities including assembly, maintenance and operation of large-scale hardware and equipment. This role will require the individual to start and work on-site in Albuquerque, NM for approximately 2 years in preparation for our operation in Oak Ridge, TN. Long-term, this individual may have the opportunity to transition and support operations on-site at our facility in Oak Ridge, TN. The ideal candidate takes pride in his/her hands-on work, organizational skills, has experience in 24/7 plant or large-scale testing operations, and will ultimately contribute to the training and transfer of knowledge/key learnings between operators at each location.

Responsibilities 

• Assembles and installs process and auxiliary equipment into assigned facilities. Frequently uses heavy equipment such as forklifts, telehandlers, and overhead hoists to support installation. 
• Commissions, operates, and maintains mechanical and electrical equipment.
• Prepares, reviews and executes system and component level commissioning, operating and maintenance procedures.
• Performs acceptance testing following new equipment installation including hydrostatic, pneumatic, I/O checks, and electrical component calibrations checks.
• Supports day-to-day operations of the assigned facility including startup, monitor, and shutdown processes and auxiliary equipment.
• Performs chemistry sampling and analysis using standardized analytical instruments and procedures.
• Monitors equipment performance by interpreting and trending process parameters. Takes corrective action to place malfunctioning equipment in a safe state.
• Performs minor preventative and corrective maintenance on mechanical and electrical equipment to include filter replacements, equipment cleaning, and consumable replacements.
• Performs equipment troubleshooting as necessary.
• Perform Lockout-Tagout of mechanical and electrical equipment.
• Reviews and executes hazardous operations per standardized operating procedures.
• Assists engineering staff to execute the R&D test program.
• Other duties as assigned

Qualifications 

• Associate or Bachelors degree in an Engineering Technology program or equivalent or 2+ years of experience as a plant operator or technician (mechanical, electrical, instrumentation, chemicals, power plant, military, or similar backgrounds are highly desired)
• Ability to start and work on-site at the Albuquerque, NM site for approximately 2 years to develop in-depth understanding of company’s large-scale hardware, equipment, and processes
• Ability and willingness to transition between Kairos Power sites in support of operations work and process development, including opportunity to potentially transition to support on-site operations at our future facility in Oakridge, TN
• Ability to understand and follow technical procedures
• Ability and interest in being cross trained and learning different processes to perform other jobs as needed
• Ability and willingness to work with hazardous materials in PPE including full-face respirator and Tyvek suit
• Familiarity with basic hand tools
• Mechanically inclined with an ability to operate plant equipment, hands-on experience with plant equipment and operations desired
• Experience with Instrumentation and Controls systems
• Computer skills including spreadsheet use
• Ability to communicate with others effectively
• Ability to read P&ID and mechanical/electrical drawings
• Ability to work with highly collaborative team
• Ability to solve problems quickly and efficiently
• Always works in a safe and compliant manner
• Prioritizes and ensures safety of oneself and others
• Ability to proactively collect, manage and transfer knowledge
• Ability to seek different and novel ways to create efficiencies when working on problems, challenges, and issues

Physical Conditions 

• Ascending or descending ladders, stairs, scaffolding, ramps, scissor lifts, articulated boom lifts and the like
• Setting up and transferring temporary structures (e.g. scaffolding, ladders)
• Moving self in different positions to accomplish tasks in various environments including tight and confined spaces
• Remaining in a stationary position, often standing, or sitting for prolonged periods
• Moving about to accomplish tasks or moving from one worksite to another
• Adjusting, moving, transporting, installing, positioning, or removing objects up to 50 pounds in all directions
• Communicating with others to exchange information
• Operating motor vehicles, heavy equipment and machinery
• Repetitive assembly operations of manufacturing test fixtures and test setups in collaboration with engineering and manufacturing teams 

Environmental Conditions

• Shop floor environment
• Low temperatures
• High temperatures
• Outdoor environment or elements such as precipitation and wind
• Noisy environments
• Small and/or enclosed spaces
• Odors or fumes from chemicals or chemical reactions
• Evaluated heights
• Accessing the accuracy, neatness and thoroughness of the work assigned
• High-concentration, demanding and fast-paced

Safety and PPE

• Reading and interpreting hazardous warning signs
• Manipulating, cleaning and disposal of hazardous materials
• Reporting issues with equipment or unsafe conditions
• Wearing proper PPE, to include full-face respirator, face shields, gloves, safety shoes, and non-permeable suit
• Handling of Beryllium (Be)

Travel 

• Some travel may be required, 5% or less

Certification  

• Capable of obtaining forklift and boom lift certification 

Additional Requirements   

• Requires occasional overtime
• Requires occasional working weekends
• Requires occasional schedule flexibility
• Requires occasional working 2nd shift, beginning at 7:00pm local time
• Requires occasional extended hours to support launch and critical project timelines 

#LI-Onsite