What you’ll do:

• Design and develop fault tolerant and high power density motor controller including drivers, sensors, power stages, and embedded control interfaces
• Be responsible for all aspects of power electronics designs from components, circuits, modules and system integration 
• Passive component design and optimization in power electronics systems
• EMC and Lightning design, analysis, and testing for low voltage and high voltage electronic systems
• Lead new designs from conception into production while working with a multidisciplinary team
• Start to finish ownership of hardware – from specification to design, prototype, reliability validation and manufacturing
• Requirements capture, topology trade-study and performance modeling
• Schematic, layout and PCB assembly design and review
• Design and carry out prototype verification tests for proof of concept
• Analyze test data and reports to verify functional and performance specifications.
• Troubleshoot and execute root cause analysis on prototype and production designs.

What you need:

• Electrical Engineering Degree or equivalent experience.
• 3+ years of relevant electrical system and circuit board design experience.
• Sound knowledge and hands-on experience in traditional and modern power electronic technologies including (not limited to):
• Inverter technology for variable speed motor drive (MOSFET, rectifiers and gate driver PWM technologies).
• Passive power devices, e.g. inductors, capacitors, resistors and transformers.
• Power electronics system architecture design and hardware integration.
• Motor drive and power converters (AC-DC, DC-DC, DC-AC) control technologies.
• Motor control and commutation methods for various types of three phase motors.
• Microcontrollers and processors
• Sensor technology and implementation
• Gate drive design for wide bandgap devices (SiC and GaN)
• Experience with 1-10kW inverters at 400V-1000V
• Experience in using schematic capture and circuit simulation software (e.g. Altium Designer or Xpedition). 
• PCB layout experience
• Experience performing circuit design analyses such as worst-case circuit analysis, fault analysis, and reliability analysis
• Experience in design for test and design for high volume manufacture
• Mastery of all types of lab instruments: oscilloscope, EMC analyzers etc.
• Excellent organizational and communication skills

Bonus Qualifications: 

• Hands on experience with DO-160G testing and DO-254 development
• Masters or Ph. D. in electrical engineering 
• Embedded firmware development experience
• Passion for aviation and eVTOLs

At Archer we aim to attract, retain, and motivate talent that possess the skills and leadership necessary to grow our business. We drive a pay-for-performance culture and reward performance that supports the Company’s business strategy. For this position we are targeting a base pay between $120,000.00 - $150,000.00. Actual compensation offered will be determined by factors such as job-related knowledge, skills, and experience.

Archer is committed to working with and providing reasonable accommodations to job applicants with physical or mental disabilities, and those with sincerely held religious beliefs. Applicants who may require reasonable accommodation for any part of the application or hiring process should provide their name and contact information to Archer’s People Team at people@archer.com. Reasonable accommodations will be determined on a case-by-case basis.

Archer is seeking a Staff Electrical Engineer- Actuators to lead the architecture, design, development and validation of electronics and electromechanical actuators used in flight-critical systems such as propulsion tilt, pitch control surfaces and landing gear. 

What you’ll do:

• Design and develop fault tolerant and high power density actuator controller including motor drivers, sensors, power stages, and embedded control interfaces
• Be responsible for all aspects of power electronics designs from components, circuits, modules and system integration 
• Passive component design and optimization in power electronics systems
• EMC and Lightning design, analysis, and testing for low voltage and high voltage electronic systems
• Lead new designs from conception into production while working with a multidisciplinary team
• Start to finish ownership of hardware – from specification to design, prototype, reliability validation and manufacturing
• Requirements capture, topology trade-study and performance modeling
• Schematic, layout and PCB assembly design and review
• Design and carry out prototype verification tests for proof of concept
• Analyze test data and reports to verify functional and performance specifications.
• Troubleshoot and execute root cause analysis on prototype and production designs.

What you need:

• Electrical Engineering Degree or equivalent experience.
• 3+ years of relevant electrical system and circuit board design experience.
• Sound knowledge and hands-on experience in traditional and modern power electronic technologies including (not limited to):
• Inverter technology for variable speed motor drive (MOSFET, rectifiers and gate driver PWM technologies).
• Passive power devices, e.g. inductors, capacitors, resistors and transformers.
• Power electronics system architecture design and hardware integration.
• Motor drive and power converters (AC-DC, DC-DC, DC-AC) control technologies.
• Motor control and commutation methods for various types of three phase motors.
• Microcontrollers and processors
• Sensor technology and implementation
• Gate drive design for wide bandgap devices (SiC and GaN)
• Experience with 1-10kW inverters at 400V-1000V
• Experience in using schematic capture and circuit simulation software (e.g. Altium Designer or Xpedition). 
• PCB layout experience
• Experience performing circuit design analyses such as worst-case circuit analysis, fault analysis, and reliability analysis
• Experience in design for test and design for high volume manufacturing
• Mastery of all types of lab instruments: oscilloscope, EMC analyzers etc.
• Excellent organizational and communication skills

Bonus Qualifications: 

• Hands on experience with DO-160G testing and DO-254 development
• Masters or Ph. D. in electrical engineering 
• Embedded firmware development experience
• Passion for aviation and eVTOLs

At Archer we aim to attract, retain, and motivate talent that possess the skills and leadership necessary to grow our business. We drive a pay-for-performance culture and reward performance that supports the Company’s business strategy. For this position we are targeting a base pay between $120,000 - $150,000. Actual compensation offered will be determined by factors such as job-related knowledge, skills, and experience.

Archer is committed to working with and providing reasonable accommodations to job applicants with physical or mental disabilities, and those with sincerely held religious beliefs. Applicants who may require reasonable accommodation for any part of the application or hiring process should provide their name and contact information to Archer’s People Team at people@archer.com. Reasonable accommodations will be determined on a case-by-case basis.

What You’ll Do: 

As a BMS Electrical Engineer, you will own hardware designs for Archer’s high voltage battery management system. 

• Lead design of BMS PCBAs, through their full lifecycle - including circuit simulation, schematic capture, layout, routing, reviews, manufacturing, and revisions.
• Work closely with mechanical and software teams, from the beginning of the design process, to ensure that our BMS hardware seamlessly integrates into the battery pack.
• Design circuits for diagnostic coverage, redundancy, and fault-tolerance - working closely with systems and safety teams to ensure that our BMS hardware meets safety goals.
• Own PCBA bring-up and verification, working hands-on with lab equipment to check that the design functions across all operating conditions and fault injection cases.
• Support software development related to new circuits and revisions, updating and authoring interface documents as needed.
• Coordinate builds with PM team, DFM team, supply chain team, and quality team. 
• Support production & manufacturing needs, including design-for-test, root-cause analysis of failures, component traceability, and build process development.
• Work with cross-functional teams to ensure smooth integration of the battery pack with other electrical systems on the aircraft. 
• Work with BMS integration, software, and controls engineers to facilitate hardware fault injection tests on HILs and packs.

What You Need:

• BS or MS degree in Electrical Engineering, Mechanical Engineering or a related field.
• 3+ years of experience designing and verifying complex electrical circuits.
• Experience with high voltage battery systems and BMS electronics.
• Experienced in Altium Designer and circuit simulation tools such as LTSpice.
• Detailed knowledge of PCB design rules including IPC-610 / 2221 / 2222.
• Excellent organizational, communication, and troubleshooting skills

Bonus Qualifications:

• Experience designing for HV battery systems in both aviation and automotive contexts.
• Layout experience with both flexible and rigid board stackups.
• Experience with new product development in regulated industries (e.g., aviation, medical devices).
• Experience with DO-160G, ISO 26262, or related standards.
• Experience designing to industry standards for electromagnetic emissions and susceptibility.

At Archer, we aim to attract, retain, and motivate talent with the skills and leadership needed to grow our business. We drive a pay-for-performance culture and reward performance that support the Company's strategy. For this position, we are targeting a base pay range of $144,000 - $180,000. Actual compensation offered will be determined by job-related knowledge, skills, and experience.

Archer is committed to working with and providing reasonable accommodations to job applicants with physical or mental disabilities, and those with sincerely held religious beliefs. Applicants who may require reasonable accommodation for any part of the application or hiring process should provide their name and contact information to Archer’s People Team at people@archer.com. Reasonable accommodations will be determined on a case-by-case basis.

Principal Application Engineer Lead (Semiconductor HW & SW)

Summary:

• You will support Ethernovia’s field team and local customers developing next-generation Automotive, Robotics, and Physical AI platforms to help integrate Ethernovia’s high-performance Ethernet solutions into advanced hardware & software systems. This is a Hybrid-based position based in San Jose, CA.

Key Responsibilities:

• Interface between Ethernovia’s field team and engineering teams, you will bring strong technical competence and the ability to communicate effectively across our multinational teams
• Work closely with field application and business development teams around the world along with internal hardware, software and architecture teams, to support customer designs from early concept and development through validation and production.
• Hands-on role that requires strong problem-solving skills and the ability to operate across fast-moving technical programs
• Work directly with customer engineering teams and the field teams on complex system integration challenges involving high-speed networking, sensor connectivity, AI compute platforms and robotics architectures.
• Day-to-day activities include;
  • Creating design collateral
  • Close collaboration with system and engineering teams
  • Technical customer support and system bring-up
  • Debugging to support integration efforts across Automotive and Robotics applications including sensor fusion and autonomous systems and AI-driven platforms

Required Experience & Skills:

• Semiconductor Industry: 10+ years of embedded development experience with focus on both hardware and software
• Hands-on design experience with at least one of the following:
  • Ethernet PHYs
  • Ethernet switches
  • PCIe 
• Ability to diagnose and debug problems effectively
• Excellent team working abilities across global teams and confident interacting with engineers through to executive management
• Automotive experience at Tier 1, Tier 2 or OEM level
• B.S. or M.S. in Electrical Engineering

Nice to Have (The "Competitive Advantage"):

• Good understanding of embedded software drivers
• Understanding and experience of OSI network layers 2+
• Experience of Ethernet switches and understanding of IEEE802.1 protocols
• Experience with TSN protocols
• Experience with PCIe protocols and topologies
• Experience covering high speed PCB board design, layout and routing constraints
• Experience with ROS / ROS2, Isaac Sim, CUDA, etc

Personal Skills:

• Excellent communication/documentation skills
• Attention to details
• Collaboration across multidisciplinary and international teams
• Self-motivated and able to work effectively both independently and in a team

What You Can Expect From Ethernovia:

• Technology depth and breadth expansion that can’t be found in a large company
• Opportunity to grow your career as the company grows
• Pre IPO stock options
• Cutting edge technology
• World class team
• Competitive base salary
• Flexible hours
• Medical, dental and vision insurance for employees

Salary Range:

• The actual offered base salary for U.S. locations will vary depending on factors such as work location, individual qualifications, specializations, years of experience, skills, job-related knowledge, and internal equity. The annual salary range for this position is $180,000 - $240,000. The compensation package will also include incentive compensation in the form of pre-IPO ISO options, as well as eligibility for performance bonuses, in addition to base salary and a full range of medical and other benefits.

* Principals Only (No Agencies)

#LI-Hybrid

At Astera Labs, we seek motivated Principal Signal and Power Integrity Engineers to work on our game-changing portfolio of connectivity products for Artificial Intelligence and Machine Learning applications. In this role, you will execute the SI planning, design, modeling, simulation, and lab validation with various system configurations. This position will be onsite.

Basic Qualifications

• Strong academic/technical background in electrical engineering; Bachelor’s is required; Master’s preferred.
• 8+ years of experience supporting or developing complex SoC/silicon products for Server and Networking applications.
• 8+ years of hands-on high-speed SI/PI design, simulation, and measurement experience.
• Have a proven track record with defining hardware system constraints and high-speed technology roadmaps.
• Cross-functional design mentality with the electrical design community to develop systems.
• Self-starting, professional, and hands-on work ethic that can execute intense research in a dynamic environment.
• Proven track record solving problems independently, preferably as a tech lead.
• Entrepreneurial, open-minded behavior, and can-do attitude.
• Authorized to work in the US and start immediately.

Required Experience

• Familiar with SI and PI design challenges for PCIe Gen5/6 and/or 224/448G Ethernet PCB and interconnects
• 2D and 3D EM simulation experience with Cadence/Ansys/ADS/etc. toolsets
• EM modeling of BGA and connector structures
• High-speed SERDES channel simulation, and equalization
• PI simulations with Ansys/Cadence toolsets
• Familiar with VNA, TDR, real-time and sub-sampling oscilloscopes, etc.
• Working knowledge of PCB fabrication limits and trade-offs
• Familiar with industry-standard such as PCI-SIG, and IEEE802.3, especially Electrical sections.
• Strong debugging, analysis, and problem-solving skills with experience leading root cause and correction action teams. An inherent sense of urgency and accountability. Must have the ability to multi-task in a fast-paced environment.

Your base salary will be determined based on your experience and the pay of employees in similar positions. The base salary range is $203,000 USD - $230,000 USD for Principal level, and $237,500 USD - $250,000 USD for Senior Principal level. The actual level is to be determined by the years of experience and interview outcome.

Job Description:

As an Analog/Mixed-Signal IC Design Engineer, you will be part of a key team designing sophisticated advanced node CMOS products. Your responsibilities will include developing and verifying circuits such as PLL, DLL, ADC, regulators, amplifiers, TX, RX, and CDRs to meet performance targets. You will also work on analog and clocking blocks for connectivity applications, using industry-standard tools like Spectre and MATLAB. The company seeks a highly motivated designer for this role

Basic Qualifications:

• Strong academic and technical background in electrical engineering. A Master’s or PhD degree in EE is required, preferably from a top-tier university.
• 2+ years of experience supporting or developing complex analog IC designs.

Required Experience:

• Hands-on experience in designing high-speed mixed-signal circuits including ADC/DAC data converters, RX front-end, TX driver/serializer, low-jitter PLLs, TX/RX calibration, low-jitter CLK distribution are other high-speed analog circuits is a must
• Have a deep understanding of biasing, band-gaps, reference circuits, opamps, comparators and other analog circuits
• Solid track-record for implementation of analog circuits high-speed data transmission.
• Design and tapeout experience in advanced CMOS nodes (ex. 20nm or newer) is a must
• Solid fundamentals in detailed transistor-level design, feedback/stability analysis, and noise/jitter analysis.
• Knowledge of TIA design and drivers for optical applications is highly desirable
• Experience in RFIC design for wireless or wireline communication systems is highly desirable.
• Strong technical independent contributor with a proven ability to drive results.
• Excellent teamwork, presentation, and documentation skills.
• Ability to collaborate with global teams across multiple time zones and deliver under pressure with strict deadlines.
• Strong experience in lab chip bring-up and debugging efforts.

Preferred Experience:

• Relevant research publications and/or patents in analog or RF IC design.
• Familiarity in programming/scripting languages such as Python, Matlab, or C.
• Experience with PCB design.
• Familiarity with Verilog RTL or DSP design concepts.
• Knowledge of optical transceivers.
• Expertise in ESD protection techniques and IC packaging methodologies.

The base salary range is $150,000.00 USD – $200,000.00 USD.

The base salary range for this role in Canada is $110,000 CAD - $130,000 CAD

Your base salary will be determined based on your location, experience, and the pay of employees in similar positions.  

Overview

Astera Labs Inc. is seeking an experienced and self-driven Hardware Lab Engineer to join our dynamic team in developing world class connectivity products for AI infrastructure.

Job Description

This role will work closely with firmware, system validation, quality, and product engineers to support silicon bring-up, characterization, and debug activities through hands-on lab execution. The ideal candidate will have a deep understanding of circuits, hands-on experience with PCBAs and silicon test environments, and the ability to work on complex, open-ended tasks with minimal oversight.

Key Responsibilities

• Setup and maintain test environments for silicon validation and characterization. Configure and update hardware, software, firmware, and applications. Replicate BKCs.
• Conduct hands-on testing of silicon devices including PCIe Gen5/6/7, CXL, Ethernet, and other high-speed interfaces
• Install and configure servers, including FW, BIOS, OS, and network
• RMA intake/triage: inspection, electrical verification, screening (including CSAM inspection), and prioritization
• Manage logistics and communications with external labs
• Organize, track, and distribute lab equipment, hardware, and peripherals
• Ad hoc PCBA rework and soldering of fine-pitch SMD components
• Develop, document, and maintain lab procedures

Required Qualifications

• Bachelor's degree in Electrical Engineering, Computer Engineering, or related field
• 5-12+ years of hands-on experience in lab environments supporting silicon validation or hardware development
• Proficiency with high-speed test equipment (oscilloscopes, protocol analyzers, BERTs, multimeters)
• Experience with high-speed interface testing (PCIe, CXL, DDR, Ethernet, or SerDes)
• Strong programming skills in Python for test automation
• Familiarity with Linux operating systems and command-line tools
• Demonstrated experience coordinating with third-party testing laboratories and managing logistics, including sample shipping, chain of custody, and scheduling
• Strong organizational skills for managing multiple RMA cases simultaneously and prioritizing based on severity/impact

Preferred Qualifications

• Experience with post-silicon validation of ASICs, SoCs, or Retimer/PHY products
• Knowledge of analog/mixed-signal circuit testing and debugging techniques
• Experience with JTAG, I2C, SPI, and other embedded interfaces
• Familiarity with PCB design, schematic reading, and signal integrity concepts
• Knowledge of data center systems architecture (servers, AI platforms, networking equipment)
• Understanding of ATE (Automated Test Equipment) systems and production test methodologies
• Experience with defect screening methodologies including visual inspection, electrical testing, and acoustic imaging
• Experience with complete RMA lifecycle management from intake through root cause analysis and corrective action
• Knowledge of common semiconductor failure modes and failure analysis techniques including die attach inspection, delamination detection, void analysis, and crack identification
• Experience with formal compliance testing and industry standards

The base salary range is $160,000.00 USD – $230,000.00 USD. Your base salary will be determined based on your location, experience, and the pay of employees in similar positions.  

Overview

Astera Labs Inc. is seeking a proactive and self-driven Hardware Lab Technician to join our team in developing world class connectivity products for AI infrastructure.

Job Description

This role works closely with various teams within our lab, including SI/PI, validation, design, NPI, and more. You will also be responsible for organizing and managing an inventory of consumables and peripherals while providing comprehensive support for lab infrastructure and daily operations. The ideal candidate will have hands-on technical skills, a strong work ethic, and the ability to manage various responsibilities in a fast-paced, collaborative environment.

Key Responsibilities

• Operate a manual probe station (MPI TS600-PCB) to probe printed circuit boards and components
• Perform DC and signal integrity measurements on PCBs and evaluation hardware
• Manage critical inventories of Astera products, tools, consumables, and peripherals, including purchasing, organizing, monitoring, and forecasting
• Assemble, inspect, and test modules/subassemblies
• Optimize and maintain lab organization
• Monitor compliance with lab policies, including ESD, cleanliness, food/drink, etc.
• Assist engineers with various other hands-on tasks, including soldering and rework of SMDs on high-density PCBAs

Required Qualifications

• 1 year of experience in a hardware lab environment
• 1 year of manual probe station experience
• Associate’s degree or equivalent technical certification in electronics engineering, electrical engineering, computer engineering, or a similar field
• Self-starter with a bias towards action
• Strong organizational skills and attention to detail
• Effective and clear communication, both written and verbal
• Ability to lift and move up to 40lbs safely

Preferred Qualifications

• 2 years of manual probe station experience
• 2 years of inventory management experience
• Comfortable performing solder rework on 0201 components, micro-coax cables, and fly line/magnet wire
• Fluent in interpreting circuit schematics and board layouts
• Ability to troubleshoot and debug PCBAs using oscilloscopes, multimeters, power supplies, etc.
• Familiarity with Python, Bash, and/or Linux
• Ability to clearly document and communicate findings and measurement results

Role Overview

Astera Labs is seeking a Manager, Package Design Engineering to lead and scale our Package Design team in San Jose. In this high-impact role, you'll own the end-to-end delivery of advanced IC packaging solutions—from early architecture definition through production ramp—enabling the next generation of AI infrastructure and connectivity products.

As the semiconductor industry races toward chiplet-based architectures, 2.5D/3D integration, and ever-increasing bandwidth demands, packaging has become a critical differentiator. You'll build and mentor a high-performing team while driving cross-functional execution with silicon architecture, SIPI, PCB, validation, manufacturing, and external partners including substrate vendors and OSATs. Your work will directly impact Astera Labs' ability to deliver industry-leading PCIe, CXL, and Ethernet connectivity solutions to the world's most demanding hyperscale and AI customers.

This role offers the opportunity to shape design methodology, establish scalable standards, and enable chip-package-board co-design frameworks across multiple product lines in a fast-moving, innovation-driven environment.

Key Responsibilities

• Team Leadership & Execution
  • Build, mentor, and scale a high-performing package design engineering team with clear ownership, accountability, and execution flows
  • Establish design templates, standards, and best-known methods (BKMs) across multiple concurrent programs
  • Lead design reviews, audits, and issue resolution through bring-up and production ramp

• Package Design Delivery
  • Own end-to-end package design execution including FCBGA/FCCSP, monolithic, multi-die, and chiplet-based designs from concept feasibility through tape-out and production
  • Define and review substrate stack-ups, pad stacks, routing strategies, and design constraints to meet electrical, thermal, mechanical, and manufacturability requirements
  • Drive technical tradeoffs across performance, cost, yield, and schedule, ensuring high-quality design closure and on-time delivery

• Cross-Functional Collaboration
  • Partner with SIPI, silicon architecture, system/board design, and product teams to drive chip-package-board co-design and resolve system-level challenges
  • Collaborate with OSATs and substrate vendors to ensure design feasibility, manufacturability, and alignment with evolving design rules and technology roadmaps
  • Support adoption of advanced packaging technologies such as 2.5D, chiplet, CPO/CPC, and heterogeneous integration platforms

• Methodology & Automation
  • Develop and scale design methodologies and automation flows to improve efficiency, quality, and repeatability across the organization

Basic Qualifications

• Bachelor's degree in Electrical Engineering, Materials Science, or related field
• 10+ years of progressive experience in IC package design using tools such as Cadence Allegro APD/SiP
• 5+ years of leadership experience managing teams or technical organizations in IC packaging environments
• Strong hands-on expertise in end-to-end package design with proven delivery of HVM-ready FCBGA/FCCSP packages using Cadence APD tool
• Experience with high-speed SerDes systems (PCIe Gen5/6/7, CXL, Ethernet 100G/200G/400G+) and advanced nodes (7nm, 5nm, 3nm)
• Deep understanding of substrate technologies, stack-ups, routing constraints, assembly processes, and SI/PI fundamentals
• Proven experience working with OSATs and substrate vendors through development and production ramp
• Experience working with OSATs and substrate vendors through development and production ramp
• Experience with advanced packaging architectures such as 2.5D/3D, chiplet, or heterogeneous integration

Preferred Qualifications

• Master's degree in Electrical Engineering or related field
• Experience with advanced packaging architectures such as 2.5D/3D, chiplet, or heterogeneous integration
• Experience implementing automation, scripting (Python, SKILL, Tcl), or workflow optimization
• Background in early package feasibility, platform evaluation, and technology roadmap development
• Familiarity with chip floor planning, architecture, and system-level tradeoffs
• Exposure to SIPI modeling and analysis, thermal, and mechanical performance considerations

The base salary range is $230,000 USD – $265,000 USD. This position can be hired as a Manager Level or Director Level. Your base salary will be determined based on location, experience, and employees' pay in similar positions.

Job Description:

As a Manager of Package Signal & Power Integrity (SIPI) at Astera Labs, you will lead and scale the SIPI engineering function responsible for developing high-performance IC packaging solutions that enable next-generation connectivity products. You will define technical strategy, build and mentor a high-performing team, and drive cross-functional execution from early definition through production. You will partner closely with silicon architecture, package design, PCB board team, hardware validation, manufacturing, and external suppliers (substrate vendors and OSATs) to ensure first-pass success while meeting electrical, cost, schedule, and production goals. You will also drive SIPI methodology evolution, modeling standards, and co-design frameworks across the chip–package–board ecosystem to enable scalable execution across multiple product lines.

Key Responsibilities

• Define and drive the company’s package SIPI strategy across multiple product generations. Ensure robust electrical performance for high-speed interfaces such as PCIe, CXL, Ethernet, and other SerDes protocols (200G/400G+).
• Lead packaging decisions impacting signal integrity, power delivery network (PDN) performance, and substrate design, including selecting packaging platforms, defining substrate stack-up, bump planning, and package architecture to meet high-speed and power integrity requirements.
• Lead cross-functional execution across silicon team, package design, marketing and APPs, PCB board team, validation team, package manufacturing, and external substrate/OSAT partners, managing technical tradeoffs among SIPI performance, cost, DFM, yield, etc., and deliver packaging solutions on schedule.
• Drive simulation-to-measurement correlation strategy, ensuring strong alignment between EM extraction, system-level models, and lab validation (VNA, TDR, high-speed oscilloscope), continuously improving model accuracy, simulation efficiency, and SIPI signoff criteria.
• Build, mentor, and scale a high-performing SIPI engineering organization, establishing clear priorities, accountability, and technical excellence across concurrent programs while driving talent development and resource planning.
• Represent SIPI leadership in executive reviews and major program milestones, clearly communicating technical strategy, risks, tradeoffs, and execution status to senior leadership and cross-functional stakeholders.

Required qualifications:

• 10+ years of progressive experience in Signal and Power Integrity (SIPI) modeling, analysis, and optimization across the chip–package–board system.
• Demonstrated experience leading teams or technical organizations in IC packaging environments.
• Strong ability to translate business objectives into technical roadmaps and execution plans.
• Deep expertise in EM extraction and modeling tools (e.g., ANSYS HFSS, SIwave, 3DLayout, Keysight ADS, etc.).
• Proven track record delivering high-performance packages such as FCBGA, FCCSP, coreless substrate, chiplet-based, and 2.5D architectures.
• Experience supporting high-speed connectivity products (PCIe, Ethernet, or equivalent SerDes technologies).
• Extensive experience in high-speed S-parameter extraction and system-level SI/PI modeling.
• Expert-level knowledge of PDN design including DC IR drop, loop inductance, target impedance, AC transient behavior, and chip-package-model (CPM).
• Experience driving chip–package–board co-design and system-level validation (eye diagram, ERL, transient response, power-aware SI).
• Demonstrated ability to correlate simulation to lab measurement (VNA, TDR, high-speed oscilloscope).
• Strong understanding of tradeoffs between SIPI performance, cost, reliability, and manufacturability.
• Experience leading vendor engagements and managing technical execution through production ramp.

Preferred Qualifications:

• Exposure to system-level performance considerations such as skew optimization, channel budget allocation strategy, or power delivery tradeoffs at the package level.
• Background in early package platform evaluation, technology benchmarking, and roadmap trade studies for next-generation connectivity or AI infrastructure products.
• Experience implementing modeling automation, workflow optimization, or data-driven design review processes to improve team scalability and execution efficiency.
• Experience with advanced packaging architectures including chiplet-based designs, 2.5D/3D integration, silicon interposer, bridge-based interconnect (e.g., EMIB-style), and heterogeneous integration platforms.
• Familiarity with UCIe-based die-to-die interconnect integration and associated SI/PI challenges at the package and substrate level.

This position can be hired as a Manager Level or Director Level. The base salary range is $230,000 USD – $265,000 USD. Your base salary will be determined based on location, experience, and employees' pay in similar positions.

Principal Power and Board Design Engineer 

Overview:
We are seeking a highly skilled and experienced Power and Board Design Engineer to join our team. In this role, you will be responsible for designing and optimizing power delivery systems for our ASIC products, ensuring robust power integrity, and developing board-level designs. Your expertise will be crucial in selecting power components, collaborating with vendors, and utilizing industry-leading tools to deliver high-performance solutions.

Key Responsibilities:

• Develop and optimize power conversion circuits, including DC-DC converters, voltage regulators, and power modules.

• Design and optimize power delivery for ASICs, ensuring stable voltage and current distribution across the board. Address power integrity challenges such as voltage ripple, noise, and impedance mismatches.

• Develop and implement board-level designs, to meet electrical and mechanical requirements with a deep understanding of PCB layout rules and constraints.

• Implement thermal solutions to maintain optimal operating temperatures for components.

• Evaluate and select appropriate power components, such as voltage regulators, capacitors, and inductors, ensuring they meet performance, thermal, and reliability specifications. Also will be asked to do the same evaluation on overall system level design components.

• Work closely with component vendors to identify and source the best power solutions, ensuring compatibility with our ASIC designs and meeting quality standards.

• Work closely with cross-functional teams, including firmware, mechanical, and validation engineers, to integrate designs into complete systems.

• Generate and maintain comprehensive design documentation, including, Specifications, schematics and BOMs.

• Conduct thorough debugging and analysis of power-related or system level issue utilizing lab equipment such as oscilloscopes and power analyzers to identify and resolve problems.

Qualifications:

• Education: Bachelor’s or Master’s degree in electrical engineering or a related field.

• Experience: 8-10 years of experience in power and board design engineering, with a focus on ASIC or high-speed digital designs.

• Technical Skills:

  • Proficiency in Cadence OrCAD and Allegro for schematic capture and PCB layout.

  • Strong understanding of power integrity principles and techniques.

  • Experience with power component selection and vendor collaboration.

  • Hands-on experience with debugging power-related issues using lab equipment.

• Soft Skills:

  • Excellent problem-solving and analytical skills.

  • Strong communication and teamwork abilities.

  • Ability to work in a fast-paced, collaborative environment.

Preferred Qualifications:

• Experience with high-speed interfaces such as PCIe, DDR, and USB.

• Familiarity with electromagnetic interference (EMI) and electromagnetic compatibility (EMC) considerations.

• Familiarity with Design for Manufacturability (DFM) considerations.

• Experience in thermal management and reliability analysis.

Why Join Us:

• Work on cutting-edge ASIC designs in a collaborative and innovative environment.

• Opportunity to influence power design strategies and contribute to product success.

• Access to state-of-the-art tools and resources to enhance your skills and career growth.

If you are passionate about power and board design engineering and meet the qualifications outlined above, we encourage you to apply and become a key contributor to our team.

Base pay range for this role is $209,000 - $230,000. Your base salary will be determined based on your location, experience, and the pay of employees in similar positions.  

Overview: 

The mission of this role is to develop and execute electrical validation tests that quantify parametric device performance and operating margins across all system conditions. The validation team upholds customer requirements to the highest standard and serves as the final authority in certifying a product’s parametric compliance.

Astera Labs is seeking motivated Principal / Senior Principal Post-Silicon Validation Engineers to support our game-changing portfolio of connectivity products for Artificial Intelligence and Machine Learning applications. In this role, you will define comprehensive post-silicon validation plans, automate IC- and board-level testing, and design experiments to identify and root-cause unexpected behavior. You will analyze and report validation results against specifications, collaborate closely with key internal stakeholders, quantify performance margins, and ensure robust, production-ready designs.

Basic Qualifications:

•  Strong academic and technical background in Electrical or Computer Engineering. At minimum, a Bachelor’s is required, and a Master’s is preferred.
•  ≥10 years experience supporting or developing complex SoC/silicon products for Server, Storage, and/or Networking applications.
•  Professional attitude with the ability to prioritize a dynamic list of multiple tasks, to plan and prepare for internal meetings in advance, and to work with minimal guidance and supervision.
• Entrepreneurial, open-minded behavior and can-do attitude. Think and act with the customer in mind!
• Proven track record solving problems independently, preferably as a tech lead
• Required experience
• Experience working on debug and bring-up of complicated SoC’s with high-speed interfaces such as PCIe/802.3 Ethernet
• Strong problem-solving skills, ability to solve problems independently
• Basic knowledge of key, high-speed design blocks such as PLL’s, CTLE, DFE, Tx EQ, PAM4 signaling
• Strong python scripting and coding ability: knowledge of object-oriented programming and basic dev ops using git for source control and collaboration
• Proficiency using high-speed lab equipment such as BERT, Oscilloscope, and VNA

Preferred Experience:

•  Experience in system testing, characterization, margin analysis and optimization of high-speed, multi-gigabit data links over long and short channels
•  Familiarity with PCIe or Ethernet especially Electrical Compliance sections
•  Hands-on experience with signal integrity, especially as it relates to PCIe/Ethernet testing and CEM/NVMe interfaces
•  Working knowledge of C or C++ for embedded FW
•  Familiarity with IEEE 802.3x Ethernet standards and both NRZ and PAM-4 signaling
•  Working knowledge of common serial data specifications such as I2C, SPI, etc
•  Knowledge of schematic capture and PCB layout tools from Cadence, Altium, etc.
•  Knowledge of simulation tools such as MATLAB, Keysight ADS, or PLTS for data analysis and modeling of electrical channel and signal integrity issues

The base salary range is USD 203,00 - USD 250,000. Your base salary will be determined based on your location, experience, and the pay of employees in similar positions.

Job Description

• Develop and perform system validation tests using leading-edge Data Center equipment and scalable automation platforms. The validation team holds customers’ system requirements in the highest regard and is solely responsible for certifying a product’s conformance to this high bar.
• Understand the performance and functionality requirements our ICs must deliver to enable customers developing Data Center systems using Astera Labs’ game-changing portfolio of connectivity products for Artificial Intelligence and Machine Learning applications.
• Formulate a comprehensive validation plan, automate the testing of ICs and board products in a data-centric manner, design experiments to root-cause unexpected behavior, report results and specification compliance in an automated fashion
• Work with key customers directly to understand their care-abouts and highlight the unique capabilities and performance of Astera Labs’ solutions.

Education and Experience Requirements

• Strong academic and technical background in electrical or computer engineering. At minimum, a Bachelor’s is required, and a Master’s is preferred.
• 8-12 years of experience supporting or developing complex SoC/silicon products for Server, Storage, and/or Networking applications.

Desired Qualifications

• Strong knowledge in scripting for automation of validation efforts (e.g. Python, Matlab)
• Experience with silicon bring-up, debugging complex electrical and system performance issues, production ramp.
• Very knowledgeable about common high-speed SerDes protocols like Ethernet, PCIe etc., and the electrical, system level specifications defined in the standard documents (IEEE802.3, PCIe Base Specification etc.)
• Very knowledgeable about SerDes architecture including Tx/Rx equalization, adaptation, CDR, block level requirements and SerDes link jitter budget.
• Experience working with lab equipment such as protocol analyzers, BERT, real-time scopes, sampling scopes and VNA
• Experience with PAM4 SerDes validation (200G/100G/50G)
• Knowledge of schematic capture and PCB layout tools from Cadence, Altium, etc.
• Knowledge of Signal Integrity simulation tools
• Professional attitude with the ability to prioritize a dynamic list of multiple tasks, to plan and prepare for customer/internal meetings in advance, and to work with minimal guidance and supervision.
• Entrepreneurial, open-mind behavior and can-do attitude. Think and act with the customer in mind!

Job Description

• Develop and perform system validation tests using leading-edge Data Center equipment and scalable automation platforms. The validation team holds customers’ system requirements in the highest regard and is solely responsible for certifying a product’s conformance to this high bar.
• Understand the performance and functionality requirements our ICs must deliver to enable customers developing Data Center systems using Astera Labs’ game-changing portfolio of connectivity products for Artificial Intelligence and Machine Learning applications.
• Formulate a comprehensive validation plan, automate the testing of ICs and board products in a data-centric manner, design experiments to root-cause unexpected behavior, report results and specification compliance in an automated fashion.
• Work with key customers directly to understand their care-abouts and highlight the unique capabilities and performance of Astera Labs’ solutions.

Basic qualifications 

• Strong academic and technical background in Electrical or Computer Engineering. At a minimum, a Bachelor’s is required, and a Master’s is preferred.
• ≥12 years' experience supporting or developing complex SoC/silicon products for Server, Storage, and/or Networking applications.
• Basic understanding of x86/ARM architecture, UEFI/Linux boot sequence. 
• Professional attitude with the ability to prioritize a dynamic list of multiple tasks, to plan and prepare for customer/internal meetings in advance, and to work with minimal guidance and supervision.
• Entrepreneurial, open-mind behavior and can-do attitude. Think and act with the customer in mind!

Required experience 

• Hands-on, thorough knowledge of high-speed protocols like CXL, PCIe, NVMe, or Ethernet.
• Experience with Silicon/System bring-up, validation, and debug experience, including in customer systems.
• A strong background in developing bench automation techniques, especially using Python, with emphasis on execution efficiency, repeatability, data analysis and reporting.
• Experience with lab equipment including protocol analyzers, in-circuit debuggers, and CPU-based tool suites.

Preferred experience 

• Working knowledge of C or C++ for embedded FW and device drivers.
• Working knowledge of SerDes architecture including Tx/Rx equalization, adaptation, CDR, block level requirements and SerDes link jitter budget. Experience with PAM4 SerDes is a huge bonus!
• Familiarity with PCIe compliance standards and ability to follow and be involved in compliance consortiums to adapt the tests to be run from X86/ARM based platforms.
• Knowledge of schematic capture and PCB layout tools from Cadence Allegro, Altium, etc.
• Knowledge of simulation tools such as Keysight ADS, Mathworks QCD, etc. for IBIS-AMI analysis.

The base salary range is $205,000.00 USD – $255,000.00 USD. Your base salary will be determined based on your location, experience, and the pay of employees in similar positions. 

Overview

The mission of this role is to develop and execute electrical validation tests to quantify parametric device performance and margins over all system conditions. The validation team holds customers’ requirements in the highest regard and is solely responsible for certifying a product’s parametric conformance to this high bar. At Astera Labs, we are looking for motivated Senior Silicon Validation Engineer to work on our game-changing portfolio of connectivity products for Artificial Intelligence and Machine Learning applications. In this role you will formulate a comprehensive post-Silicon validation plan, automate the testing of ICs and board products, design experiments to root-cause unexpected behavior, report results and specification compliance, and work with key internal customers to quantify margins and ensure robustness. 

Basic Qualifications 

• Strong academic and technical background in Electrical or Computer Engineering. At minimum, a Bachelor’s is required, and a Master’s is preferred. 
• ≥3 years' experience supporting or developing complex SoC/silicon products for Server, Storage, and/or Networking applications. 
• Professional attitude with the ability to prioritize a dynamic list of multiple tasks, to plan and prepare for internal meetings in advance, and to work with minimal guidance and supervision. 
• Entrepreneurial, open-mind behavior and can-do attitude. Think and act with the customer in mind! 
• Proven track record solving problems independently. 

Required Experience 

• Familiarity with DDR4/5 memory standards and DIMM configuration, experience in system testing, characterization, margin analysis and optimization 
• Working knowledge of key, high-speed design blocks such as PLL’s, DFE, Tx EQ 
• Strong python scripting ability: knowledge of object-oriented programming and basic dev ops using git for source control and collaboration 
• Deep background in developing bench automation techniques, preferably using Python, with emphasis on execution efficiency, repeatability, and data analysis. 
• Proficiency using high-speed lab equipment such as BERT, Oscilloscope/high-speed probe, and VNA 

Preferred Experience 

• Hands-on experience with signal integrity, especially as it relates to multi-rank DDR and DDR termination schemes 
• Working knowledge of C or C++ for embedded FW 
• Familiarity with PCIe/CXL compliance standards and ability to drive electrical compliance testing at industry workshops 
• Experience working with DRAM memory vendors on DDR4 or DDR5 to identify issues and working with internal SoC HW/FW teams to improve memory calibration and tuning sequences 
• Working knowledge of common serial data specifications such as I3C, I2C, SPI, etc 
• Knowledge of memory subsystem compliance and RAS is a plus. 
• Knowledge of schematic capture and PCB layout tools from Cadence, Altium, etc. 
• Knowledge of simulation tools such as MATLAB, Keysight ADS, PLTS for data analysis and modeling of signal integrity issues. 

Overview:
We are seeking a highly skilled and experienced Technical Lead Power Engineer to join our team. In this role, you will be responsible for designing and optimizing power delivery systems for our ASIC products, ensuring robust power integrity, and developing board-level designs. Your expertise will be crucial in selecting power components, collaborating with vendors, and utilizing industry-leading tools to deliver high-performance solutions.

Key Responsibilities:

• Develop and optimize power conversion circuits, including DC-DC converters, voltage regulators, and power modules.
• Design high-efficiency, high-reliability power circuits including:
• Buck / boost / buck-boost converters
• Multiphase regulators
• Hot-swap, protection, and sequencing circuits
• Design and optimize power delivery for ASICs, ensuring stable voltage and current distribution across the board. Address power integrity challenges such as voltage ripple, noise, and impedance of mismatches.
• Perform power integrity, transient response, stability, and thermal analysis.
• Evaluate and select appropriate power components, such as voltage regulators, capacitors, and inductors, ensuring they meet performance, thermal, and reliability specifications. Also, will be asked to do the same evaluation on overall system level design components.
• Work closely with component vendors to identify and source the best power solutions, ensuring compatibility with our ASIC designs and meeting quality standards.
• Work closely with cross-functional teams, including firmware, mechanical, and validation engineers, to integrate designs into complete systems.
• Generate and maintain comprehensive design documentation, including, Specifications, schematics and BOMs.
• Conduct thorough debugging and analysis of power-related or system level issue utilizing lab equipment such as oscilloscopes and power analyzers to identify and resolve problems.

Basic Qualifications:

• Education: Bachelor’s or Master’s degree in electrical engineering or related field.
• Experience: 5-8 years of experience in power and board design engineering, with a focus on ASIC or high-speed digital designs.
• Technical Skills:
• Proficiency in Cadence OrCAD and Allegro for schematic capture and PCB layout.
• Strong understanding of power integrity principles and techniques.
• Experience with power component selection and vendor collaboration.
• Hands-on experience with debugging power-related issues using lab equipment.
• Proficiency with lab equipment (oscilloscopes, electronic loads, spectrum analyzers).
• Soft Skills:
• Excellent problem-solving and analytical skills.
• Strong communication and teamwork abilities.
• Ability to work in a fast-paced, collaborative environment.

Preferred Qualifications:

• Familiarity with high-speed interfaces such as PCIe, DDR, and USB.
• Familiarity with electromagnetic interference (EMI) and electromagnetic compatibility (EMC) considerations.
• Familiarity with Design for Manufacturability (DFM) considerations.
• Experience in thermal management and reliability analysis.

Why Join Us:

• Work on cutting-edge ASIC designs in a collaborative and innovative environment.
• Opportunity to influence power design strategies and contribute to product success.
• Access to state-of-the-art tools and resources to enhance your skills and career growth.

If you are passionate about power and board design engineering and meet the qualifications outlined above, we encourage you to apply and become a key contributor to our team.

Base pay range for this role is $170,000 - $195,000. Your base salary will be determined based on your location, experience, and the pay of employees in similar positions.  

Figure is an AI robotics company developing autonomous general-purpose humanoid robots. The goal of the company is to ship humanoid robots with human level intelligence. Its robots are engineered to perform a variety of tasks in the home and commercial markets. Figure is based in San Jose, CA and require 5 days/week in-office collaboration.

We are seeking an Electrical Rework Technician to own PCBA rework, micro-soldering, and board-level repair across Figure’s humanoid robot hardware. This role is focused on high-quality workmanship, precision rework, and fast turnaround of complex electronics during development, validation, and early production.

You will work hands-on with dense, high-value PCBAs, supporting engineering debug, ECOs, and failure recovery while maintaining strict quality and repeatability standards. This role is critical to enabling rapid iteration during development and preventing rework from becoming a bottleneck as hardware matures toward production.

Key Responsibilities:

• Perform precision soldering and rework on complex PCBAs to high workmanship standards
• Execute advanced micro-soldering tasks, including:
  • Fine-pitch SMD components
  • High pin-count connectors
  • QFN, LGA, and BGA rework (including reflow and reballing)
• Diagnose and repair damaged pads, traces, vias, and connectors
• Support engineering debug by implementing board modifications, ECOs, and bodge rework
• Work from schematics, board layouts, and engineering guidance to execute accurate rework
• Document rework actions, common failure modes, and lessons learned
• Help define, improve, and standardize rework procedures and workmanship guidelines
• Train and support technicians and engineers on soldering best practices
• Maintain soldering tools, microscopes, rework stations, and consumables
• Collaborate closely with Electrical Engineering, Hardware Integration, and Manufacturing teams

Requirements:

• 5+ years of professional experience in electronics soldering and PCBA rework
• Extensive hands-on experience with fine-pitch and high-density PCBAs
• Proven expertise in micro-soldering under microscope
• Strong understanding of PCB construction, component packages, and thermal behavior
• Ability to consistently produce clean, reliable, and inspectable rework
• High attention to detail and pride in workmanship
• Comfortable working independently on high-value, time-critical hardware

Bonus Qualifications:

• IPC certification or equivalent professional training
• Experience supporting R&D, robotics, or high-reliability electronics programs
• Ability to read schematics and board layouts to support debug and rework decisions
• Experience feeding rework learnings back into design-for-manufacturing improvements
• Familiarity with early production or EVT/DVT hardware environments

The US hourly range for this full-time position is between $30-$50/hr.

The pay offered for this position may vary based on several individual factors, including job-related knowledge, skills, and experience. The total compensation package may also include additional components/benefits depending on the specific role. This information will be shared if an employment offer is extended. 

Join the Trackonomy Team! 

At Trackonomy, our employee value proposition champions your growth through varied responsibilities and a commitment to innovation. Join us to evolve professionally in a company that reshapes both industries and individuals.

Connection & Community: You're essential to Trackonomy's mission, and every team member is regarded as a founder.  Collectively, our goal is to make a lasting impact on the world, making every endeavor at Trackonomy a meaningful journey.

Growth & Development: Dive into diverse roles and learn from our seasoned leaders. Your potential and passion define your trajectory here. We value innovation and offer unparalleled opportunities, making your career journey transformative. At Trackonomy, your growth is multifaceted. Collaborate and learn directly from senior leaders across various departments. Here, your potential—fueled by capability, passion, and results—determines the scope of your role.  At Trackonomy, merit and opportunity outweigh mere experience. It's a level playing field, offering unique opportunities not found elsewhere.

Impact: Trackonomy is dedicated to impactful tech solutions that better our world. From fire prevention to enhanced security, our innovations don't just change industries; they save lives. Join us to be part of meaningful change.

About Trackonomy 

At Trackonomy, we are pioneering a transformative network of interconnected objects. Our goal is to bring inanimate objects to life, giving them the ability to converse, think, and interact in real-time. Envision a world where our devices seamlessly integrate with every physical entity, facilitating a global conversation among them. Our overarching mission is to craft the operating system for the connected world, one object, and sensor at a time.  Our customers are major players in various verticals such as logistics, industrial, utilities, healthcare, and government. They use our solutions for a wide range of applications like predictive maintenance, workflow optimization, asset protection, safety, security, and environmental monitoring. We are a unicorn, funded by top investors like Kleiner Perkins and 8VC.

Our executive leadership team has experience working together for over two decades, having previously held key roles in the C-suites of renowned companies such as Flextronics, Heptagon, GT-Nexus, and Digital Motors Corporation. Together, we have engineered a revolutionary technology that is yielding extraordinary results. 

Are you ready to be a part of the next chapter in Silicon Valley's hyper-growth IoT success story?

Summary:
We are seeking a Senior NPI Electrical Engineer to lead new hardware products from prototype through high-volume manufacturing. This role owns electrical readiness across the NPI lifecycle, including design validation, failure analysis, and production test strategy, with responsibility for successful transfer to both in-house manufacturing and offshore partners (CMs, OEMs, ODMs). You will work hands-on in builds while driving cross-functional execution to ensure products are robust, testable, and scalable.

Key Responsibilities:

• Lead NPI builds (EVT → DVT → PVT → ramp), ensuring electrical and manufacturing readiness for production
• Drive product transfer to internal manufacturing and external partners, aligning on test strategy, yield targets, quality standards, and build process
• Provide hands-on electrical support during builds, including debugging failures across PCBA assembly, system integration, and test
• Perform deep root cause analysis on prototype and production issues; drive corrective actions across design, quality, and manufacturing teams
• Define, develop, and deploy production test strategies (functional, ICT, system-level), with strong emphasis on coverage, scalability, and reliability
• Design, validate, and maintain test fixtures, equipment, and PCBA programming stations to ensure consistent production performance
• Work with NPI Software Engineer to develop and maintain Python (or similar) scripts for automated testing, programming, and data collection
• Partner closely with technicians and production teams to resolve issues and implement repeatable, operator-friendly processes
• Review schematics and PCB layouts; provide DFM/DFT feedback to improve manufacturability, testability, and reliability
• Analyze yield, test, and field return data to drive continuous improvement in product quality and performance (including DPPM reduction)
• Support ECO implementation and maintain clear, accurate NPI and test documentation
• Collaborate on field failure investigations and customer-reported issues, ensuring learnings are fed back into design and manufacturing

Qualifications:

• Bachelor’s degree in Electrical Engineering or related field
• 5-7 years of experience in electrical engineering, with strong focus on NPI, manufacturing, or product transfer
• Proven experience scaling hardware products from prototype to mass production, including work with offshore manufacturers

Technical Skills:

• Strong foundation in analog and digital circuits, embedded systems, and system-level integration
• Proficient with lab equipment (oscilloscopes, multimeters, logic analyzers, power supplies) for hands-on debugging
• Experience with schematic and PCB tools (e.g., Altium, OrCAD) and design reviews
• Experience developing manufacturing test solutions, including fixture design, test coverage, and automation
• Proficiency in Python or similar scripting languages for test automation and data analysis
• Familiarity with communication protocols (I2C, SPI, UART, USB, etc.)
• Working knowledge of DFM, DFA, and DFT principles

Additional:

• Strong ownership and ability to drive execution across complex, cross-functional programs
• Excellent analytical skills with a data-driven approach to problem solving
• Clear and effective communicator, including with executive stakeholders
• Comfortable operating in fast-paced, high-ambiguity startup environments
• Willingness to travel to manufacturing sites as needed
• Fluent in English; bilingual in Spanish or Chinese preferred

Trackonomy Systems is proud to ensure equal employment opportunities to all individuals regardless of their race, color, religious creed, national origin, ancestry, physical or mental disability, sex, gender, gender identity, gender expression, sexual orientation, age, medical condition, genetic information, marital or registered domestic partnership status, military or veteran status, or any other characteristic protected by state, federal, or local law. 

We strive to provide a stellar experience throughout the application process and ensure all applicants will be given proper consideration based solely on merit and Trackonomy’s business needs.

Trackonomy Systems is dedicated to working with and providing reasonable accommodations to individuals with physical and mental disabilities. If you need assistance or accommodation due to a disability while interviewing, please contact hr@trackonomysystems.com.

When you apply for a job on this site, you acknowledge and agree that the personal data contained in your application will be collected and processed by Trackonomy Systems, Inc. and/or one of its subsidiaries (“Trackonomy”) in accordance with our Applicant Privacy Notice.­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ If you have any questions about our privacy practices, please contact legal@trackonomysystems.com. 

What You'll Do:

What You Need:

Bonus Qualifications:

At Archer, we aim to attract, retain, and motivate talent with the skills and leadership needed to grow our business. We drive a pay-for-performance culture and reward performance that support the Company's strategy. For this position, we are targeting a base pay range of $50,600 - $69,600. Actual compensation offered will be determined by job-related knowledge, skills, and experience.

Archer is committed to working with and providing reasonable accommodations to job applicants with physical or mental disabilities, and those with sincerely held religious beliefs. Applicants who may require reasonable accommodation for any part of the application or hiring process should provide their name and contact information to Archer’s People Team at people@archer.com. Reasonable accommodations will be determined on a case-by-case basis.

Responsibilities 

• Design/Analyze/Test EMI Filters for various Archer Products. Provide inputs regarding value selection, orientation of components, board layout guidelines and grounding strategies for EMI Filters.
• Perform in-depth Circuit and FEM Simulations for Emissions, Susceptibility, ESD and lightning strikes. 
• Provide detailed EMC recommendations to Electrical, Power Electronics and Mechanical Engineers for PCB board layout/Cable shielding strategies, enclosure designs, grounding etc.
• Work closely with EMC Test Engineers to design/test/certify various Archer Products for DO-160G/MIL 461G.
• Work with EMC test labs for Aircraft level and DO-160/MIL 461G pre-compliance/compliance for Archer Products.

Requirements

• Strong background in EMI Analysis/Simulation of Power Electronics/Electric Circuits. 
• Solid knowledge and usage of Circuit Simulation tools (MATLAB, PLECS, PSIM etc.) and Ansys EM tools (Q3D, SIWave, HFSS and Maxwell)
• Detailed Understanding of various EMC Equipment such as LISNs, Antennas, BCI Probes, EMI test receivers, Spectrum Analyzers, Oscilloscopes, Vector Network Analyzer, Impedance Analyzer etc.
• Familiarity with various standards such as DO-160, MIL-461, CISPR 12/16/25/32, UN ECE Regulation 10, FCC Part 15/18 etc.

Bonus Qualifications 

• Prior EMC Per-Compliance and Certification experience in Aerospace (DO 160 or MIL 461) /Automotive Industry (FCC or UN ECE Reg 10).
• Detailed Understanding about SI/PI – Design/Simulation and Measurement.
• Experience with analysis/design/test with Active EMI filters.

At Archer, we aim to attract, retain, and motivate talent with the skills and leadership needed to grow our business. We drive a pay-for-performance culture and reward performance that supports the Company’s strategy. For this position, we are targeting a base pay range of $134,000 - $194,000. Actual compensation offered will be determined by job-related knowledge, skills, and experience.        
                

Archer is committed to working with and providing reasonable accommodations to job applicants with physical or mental disabilities, and those with sincerely held religious beliefs. Applicants who may require reasonable accommodation for any part of the application or hiring process should provide their name and contact information to Archer’s People Team at people@archer.com. Reasonable accommodations will be determined on a case-by-case basis.

As a Staff DFM Engineer, you'll play a critical role in ensuring our printed circuit board assemblies (PCBAs) are optimized for manufacturability, reliability, and scalability in our revolutionary eVTOL aircraft. You'll be the bridge between design and production, driving manufacturing excellence while supporting Archer's mission to transform urban transportation.

What you’ll do:

• Lead PCBA manufacturing strategy for eVTOL applications, establishing scalable build processes from prototype to mass production.
• Qualify and verify manufacturing partners, evaluating technical capabilities, quality systems, and production capacity for both quick-turn prototypes and high-volume manufacturing.
• Develop and maintain DFM standards, creating comprehensive procedures, checklists, and best practices for rigid, flex, and rigid-flex PCB designs.
• Provide expert DFM guidance by reviewing PCBA designs and recommending optimizations to enhance manufacturability, yield, and cost-effectiveness.
• Drive process excellence at subcontractor sites by developing, implementing, and enforcing manufacturing procedures and quality standards.
• Conduct materials research and qualification through Design of Experiments (DoEs) to identify optimal materials for demanding eVTOL aerospace applications.
• Collaborate with eCAD librarians to develop component footprints that meet DFM requirements and manufacturing constraints.
• Lead root cause analysis for PCBA failures encountered during reliability testing and field operations, implementing corrective actions.
• Champion yield improvement initiatives at subcontractor assembly lines through data-driven problem solving.
• Partner cross-functionally with electrical engineering, mechanical engineering, program management, and product lifecycle teams to deliver exceptional results.

What you need:

• BS Degree in Electrical, Mechanical, or Materials Science Engineering with 10+ years or MS with 6+ years of experience in related fields.
• Experience developing and implementing DFM processes for rigid, flex, and rigid-flex printed circuit board designs for aerospace, automotive, or industrial applications.
• Experience developing processes for press-fit applications.
• A working knowledge of the materials, material properties, and processes used in PCBA manufacturing.
• A working knowledge of IPC-610.
• Experience developing, deploying, and enforcing processes at subcontractor sites.
• Experience investigating and resolving issues encountered at subcontractor sites.
• Ability to travel frequently, ~20%.
• Excellent organizational and communication skills.

Bonus Qualifications: 

• Experience with Altium Designer.
• Experienced in the development of RoHS compliant assemblies.
• Experience performing schematic capture for mixed signal, high voltage, and high power applications.

Please note that this job description is intended to provide a general overview of the position and does not include an exhaustive list of responsibilities and qualifications

At Archer we aim to attract, retain, and motivate talent that possess the skills and leadership necessary to grow our business. We drive a pay-for-performance culture and reward performance that supports the Company’s business strategy. For this position we are targeting a base pay between $172,800 -$216,000. Actual compensation offered will be determined by factors such as job-related knowledge, skills, and experience.

Archer is proud to be an Equal Opportunity employer committed to diversity and inclusivity in the workplace. All aspects of employment are decided on the basis of merit, qualifications, and business needs. We do not discriminate based upon race, color, religion, sex, sexual orientation, age, national origin, disability status, protected veteran status, gender identity or any other characteristic protected by federal, state or local laws.

Archer is committed to working with and providing reasonable accommodations to job applicants with physical or mental disabilities, and those with sincerely held religious beliefs. Applicants who may require reasonable accommodation for any part of the application or hiring process should provide their name and contact information to Archer’s People Team at people@archer.com. Reasonable accommodations will be determined on a case-by-case basis.

What You Bring

• Deep Technical Expertise: 10+ years of experience in Supplier Industrialization, Manufacturing Engineering, or Quality Engineering, with a strong focus on electrical and electronic components including PCB/PCBA, wiring harnesses, connectors, semiconductors, and power electronics assemblies.
• Education: Bachelor’s degree in Electrical Engineering, Electronics Engineering, Manufacturing Engineering, or related STEM field (Advanced degree preferred).
• Shop Floor Credibility: Proven ability to troubleshoot complex manufacturing and integration issues on-site at suppliers, particularly in PCBA fabrication and assembly, cable/harness manufacturing, box builds, and high-reliability electrical system integration.
• Systems Thinking: Deep proficiency in AS9100, AS9145 (APQP/PPAP), IPC-A-610, IPC/WHMA-A-620, and structured problem-solving methodologies (8Ds, 5-Whys, Fishbone) within regulated aerospace, automotive, or high-reliability electronics environments.
• Strategic Leadership: Experience building or leading technical teams through an OEM production ramp, with the ability to balance immediate tactical "fires" against long-term process scalability.
• Influence & Communication: Ability to translate complex technical risks into clear, actionable insights for executive leadership and cross-functional partners in Engineering and Supply Chain.

Desired Experience

• Electronics Specialization: Hands-on experience with electronics manufacturing technologies in an aerospace or high regulatory environment. Areas of expertise include: PCBA, wiring harnesses, avionics, flight control systems, and environmental control systems.
• Certification Pedigree: Previous experience supporting FAA/EASA Type Certification (TC) or Production Certification (PC) programs.
• Tooling Mastery: Expertise in assessing supplier tooling, fixturing, and test infrastructure for PCBA and electrical assemblies, ensuring robust process control, thermal stability, durability, and consistent quality at production rate.
• Digital Integration: Experience leveraging PLM, ERP, and QMS systems to drive supplier transparency and data-driven quality decisions.
• Bachelor of Science Degree in STEM field of study. Advanced degree preferred. 
• 7+ years experience in Quality/Operations/Supply chain management.  
• Deep technical expertise of aircraft components or electric vehicle components

Archer is committed to working with and providing reasonable accommodations to job applicants with physical or mental disabilities, and those with sincerely held religious beliefs. Applicants who may require reasonable accommodation for any part of the application or hiring process should provide their name and contact information to Archer’s People Team at people@archer.com. Reasonable accommodations will be determined on a case-by-case basis.

What you’ll do:

1. Lead the hardware and software integration and development tests for the high performance aerospace power electronics (DC-DC, DC-AC, AC-DC) products
2. Responsible to specify, design, and perform testing of electrical aspects of product modules and boards implemented in airborne power conversion and distribution systems
3. Clearly define test plans and procedures, perform test cases and generate test reports for board/module bring-up, design verification and system integration, and support other tests including end-of-line, environmental / electrical stress and safety-of-flight
4. Lead tester designs from conception into production while working with cross-functional teams. Start to finish ownership of tester hardware to characterize / validate features, functions and performance of complex high voltage converters – from specification to design, build, manufacturing, and operation
1. Create development test cases for modules and boards
2. Tester design, covering both hardware and software needs
3. Test station build, bring-up, troubleshoot, operation and maintenance
4. Test station data consolidation, visualization, review and analysis
5. Conduct failure analysis of the modules / boards to understand the root cause and lead the cross-functional team effort to identify the resolutions
6. Support flight test data review and analysis for airborne power electronics products
7. Drive continuous design and performance improvement of power electronics products, and provide constructive and accurate feedbacks to the teams

What you need:

• BS Degree in Electrical Engineering with 3+ years or MS with 1+ years of experience in related fields
• Sound knowledge and hands-on experience in integration and testing of high voltage power electronics converters, mixed signal boards, and power / gate drive boards
• Good understanding of power electronics components and modules, including power semiconductors, gate drivers, magnetic components (transformers, inductors), passive components, connectors, device characterization, converter topologies (DC-DC, DC-AC, AC-DC), mechanical packaging, thermal management, modulation techniques, and control methods
• Experience converting requirements and schematics into test plans with pass / fail criteria
• Familiarity with automated test station hardware and software tools (e.g. NI, Labview)
• Master of all types of lab instruments: power supplies, oscilloscope, signal generators, network analyzer, electronic loads, CAN tools, etc.
• Experience performing the design and build of test stations
• Experience managing vendors that are performing the design and build of test stations
• Experience performing power electronics board and module bring-up and design verification test
• Experience on root cause analysis of power converter module / board failures
• Exceptional analytical problem solving skills for complex hardware / software and attention to details
• Excellent organizational and communication skills

Bonus Qualifications: 

• Hands on experience with DO-160G testing
• Embedded firmware development experience
• Experience with Python, C, C++, Matlab
• Experience in using circuit simulation software, schematic capture, and PCB layout software (e.g. Spice, Altium Designer)
• Passion for aviation and eVTOLs

At Archer, we aim to attract, retain, and motivate talent with the skills and leadership needed to grow our business. We drive a pay-for-performance culture and reward performance that supports the Company’s strategy. For this position, we are targeting a base pay range of $105,600 - $145,200. Actual compensation offered will be determined by job-related knowledge, skills, and experience.        
   

Archer is committed to working with and providing reasonable accommodations to job applicants with physical or mental disabilities, and those with sincerely held religious beliefs. Applicants who may require reasonable accommodation for any part of the application or hiring process should provide their name and contact information to Archer’s People Team at people@archer.com. Reasonable accommodations will be determined on a case-by-case basis.

What you’ll do:

• Lead mechanical design of high power electrical assemblies like DCDC converters, chargers, and motor controllers from a blank sheet to complete design.
• Collaborate with other mechanical, systems, electrical, safety and manufacturing engineers to optimize your design for overall vehicle performance. 
• Solve electric propulsion design challenges like thermal management, HV electrical isolation, HV interconnects, shock and vibration survival, environmental sealing, electromagnetic interference, etc.
• Complete detailed design of components like plastic housings, sheet metal brackets, insulation systems, high voltage connectors, fasteners, structural supports, etc. 
• Analyze designs to ensure they meet requirements using heat transfer, thermal analysis, design for assembly, structural calculations, and failure mode analysis, etc.
• Develop engineering test plans for designs.
• Create assembly and component drawings and work with suppliers to manufacture your designs.
• Lead engineering prototype builds and design validation testing. 

What you need:

• Mechanical Engineering or equivalent degree.
• 4+ years of relevant Mechanical Design experience. 
• Demonstrated ability designing a high voltage electronic assembly from a blank sheet to production.  
• Strong mechanical design analytical skill in structural analysis, fluids, thermals, heat transfer, materials, etc.
• Strong 3D design experience and skill, preferably with NX. 
• Solid understanding of electrical design fundamentals.
• Basic Matlab or Python skill.
• Familiarity with thermal and structural finite element analysis methods and tools (STAR CCM, ANSYS, ICEPACK, COMSOL).
• Experience with GD&T, design for reliability, and design for manufacturing..
• Experience with product life management systems, including BOMs and engineering change orders.
• Experience with high volume manufacturing processes such as injection molding, stamping, soldering, welding, diecast, PCB fabrication, etc.

Bonus Qualifications: 

• Experience designing components for aerospace or automotive requirements
• Hands on experience with aviation DO-160G testing and DO-254 development
• Passion for aviation and eVTOLs

Archer is committed to working with and providing reasonable accommodations to job applicants with physical or mental disabilities, and those with sincerely held religious beliefs. Applicants who may require reasonable accommodation for any part of the application or hiring process should provide their name and contact information to Archer’s People Team at people@archer.com. Reasonable accommodations will be determined on a case-by-case basis.

About the role

Muon seeks a Spacecraft Test Engineer to join our Assembly, Integration, and Test team.  The ideal candidate is a self-motivated engineer and is responsible for understanding every system on the satellite. Engineers on this team must have a working knowledge of design schematics, operations, manufacturing, testing, and flight. A successful Spacecraft Test Engineer demonstrates engineering intuition and critical thinking and is comfortable working under ambiguous requirements. They will interface with other engineers, subject matter experts, and technicians to solve production challenges, support with prototype projects, and to prepare flight hardware as a part of building the satellites.

Responsibilities

• Enable day-to-day execution of spacecraft integration and test flow
• Support non-conformance investigation to determine root cause
• Support AIT in the setup and activation of production lines and development and qualification of hardware test setups
• Support the development of flight hardware, ground support equipment and qualification test assets
• Support electrical engineering during development and pre-production phases of hardware life-cycles, as required
• Perform bring-up and acceptance tests of PCBAs, as required

Qualifications

• B.S. in Computer Science or Computer, Electrical, or related engineering discipline
• 5+ years experience in aerospace or similar industry
• Familiarity with programming and scripting languages or ability to quickly learn them (i.e. Python, Tcl, C++, SQL)
• Hands-on experience using electrical test equipment (multimeters, oscilloscopes, power supplies, etc.)
• Understanding and experience in environmental testing such as vibration, shock, thermal, burn-in, and TVAC
• Excellent verbal and written communication skills
• Demonstrated capability to jump into ill-defined problems and drive positive outcomes
• RF Experience

Nice-to-have Skills

• Experience working in a Class 10k (ISO 7) cleanroom environment
• Documentation and configuration management experience
• Experience writing test plans, procedures and providing go/no-go judgment and rationale
• Experience troubleshooting electronics hardware 
• Proficiency in understanding PCB schematics and layout tools

Salary

The salary range for this role is $123,000 - $139,000 plus a competitive equity grant and comprehensive benefits package. Final compensation will be based on skills, qualifications, experience, and geographic location as assessed during the interview process.

OUR COMPANY

As an early mover in the in-space transportation and infrastructure services, Momentus is at the forefront of the commercialization of space. With an experienced team of aerospace, propulsion, and robotics engineers, Momentus has developed a cost-effective and energy-efficient in-space transport system. 

OUR PEOPLE

Daring problems require daring solutions.  We boldly charge into uncharted territory knowing that no matter the outcome we will benefit from the journey and move closer to our goals no matter what. Our teams know that working at Momentus means more than building innovative technology, it means creating entirely new markets in the space economy. We are level-headed, business-minded strategic thinkers intent on providing immediate value to our customers today while simultaneously preparing for the vast possibilities of the future. If this sounds like you, we should talk.

JOB SUMMARY

We are seeking a Power Systems Engineer to develop, implement, and maintain advanced power systems.  The ideal candidate should be accustomed to working in a fast-paced environment and enjoys working on ensuring the reliability, efficiency, and sustainability of the power supply, addressing both the technical and economic aspects of power system design and operation. Energy systems are critical for powering spacecraft and supporting long-duration missions. 

Key Responsibilities: 

• Design, analyze, and support power systems, including power distribution, power conditioning, and battery interfaces 
• Perform power budgeting, load analysis, and efficiency trade studies across mission phases 
• Ability to analyze and design systems in a collaborative multidiscipline environment 
• High level of proficiency in circuit analysis, test, and troubleshooting 
• Write clear and concise reports that document your work 
• Provide power system expertise during system integration and performance testing  

Required Skills and Experience 

• Proficient in all phases of engineering development (requirements, design, test, and production) 
• Experience using industry-specific tools to analyze and test electronic systems 
• Ability to write technical documents and procedures 
• Experience with spacecraft or aerospace power systems, including battery management systems (BMS) 
• Familiarity with power integrity analysis, grounding strategies, and high-current PCB layout techniques 
• Ability to work independently 
• Excellent technical communications skills 
• Excellent written and verbal communication skills 

Desired Skills and Experience: 

• Previous experience working on DoD and other USG development and deployment programs 
• Ability to hold and maintain a USG Security Clearance 

Education & Work Experience: 

• Master's in Electrical Engineering, Physics, or equivalent with 5+ years  
• Bachelor's degree with 10+ years 

Compensation:

Annual Base Salary Range: $140,000 - $195,000/per year
Base pay is one part of our total compensation package (base+bonus+equity) and is determined within a range. Your actual base salary will be determined on job-related knowledge and skills, education, and experience.  Our benefit plans include medical, dental, and vision insurance, 401k retirement plan, short and long term disability and life insurance. We also offer flexible PTO, along with 11 paid holidays, sick time and paid parental leave.

This is a full-time position in San Jose, California. This position requires access to export-controlled commodities, technical data, technology, software, and services. U.S. citizenship, U.S. legal permanent resident status, or protected person status under 8 U.S.C. § 1324b(a)(3) is required. 

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

To all recruitment agencies: Momentus does not accept agency resumes. Please do not forward resumes to our employees or any company email. Momentus will not be responsible for any fees related to unsolicited resumes.  

OUR COMPANY

As an early mover planning to offer key in-space transportation and infrastructure services, Momentus is at the forefront of the commercialization of space. With an experienced team of aerospace, propulsion, and robotics engineers, Momentus has developed a cost-effective and energy-efficient in-space transport system based on plasma water propulsion technology. 

OUR PEOPLE

Daring problems require daring solutions.  We boldly charge into uncharted territory knowing that no matter the outcome we will benefit from the journey and move closer to our goals no matter what. Our teams know that working at Momentus means more than building innovative technology, it means creating entirely new markets in the space economy. We are level-headed, business-minded strategic thinkers intent on providing immediate value to our customers today while simultaneously preparing for the vast possibilities of the future. If this sounds like you, we should talk.

JOB SUMMARY

We are seeking an Electrical Technician to support spacecraft assembly, integration, and test activities across electrical systems and avionics hardware for Momentus satellite platforms and in-space transportation systems.  

Key Responsibilities: 

Assembly, Integration & Build 

• Assemble spacecraft avionics hardware, including PCBA, wiring harnesses, cable assemblies, and electromechanical subassemblies from engineering drawings and work instructions  
• Fabricate flight and test (EGSE) harnesses including crimping, stripping, soldering, shielding (foil/braid), and connectorization  
• Integrate avionics systems into spacecraft buses and support installation at subsystem and system level  

PCB Assembly & Rework 

• Perform surface-mount (SMT), fine-pitch, and through-hole soldering and rework to IPC standards  
• Execute PCB modifications (component replacement, cut-and-jump, trace repair, conformal coating touch-up)  
• Inspect PCBAs using microscopes and verify workmanship against applicable standards  

Test & Troubleshooting 

• Perform electrical testing including continuity, resistance, voltage/current measurements, and signal verification  
• Operate lab/test equipment such as multimeters, oscilloscopes, power supplies, and data acquisition systems  
• Troubleshoot hardware issues at board, harness, and system level; support root cause and corrective actions  

Inspection & Quality 

• Inspect incoming and in-process hardware (PCBs, harnesses, connectors) for compliance with drawings and standards  
• Verify connector pinouts, cable continuity, and system functionality  
• Support non-conformance resolution and collaborate with Quality and Engineering teams  

Test Operations & Environmental Support 

• Support spacecraft test campaigns including functional test, thermal vacuum (TVAC), vibration, and system validation  
• Assist with setup and operation of test configurations, instrumentation, and test fixtures  
• Monitor and document test results and anomalies  

Documentation & Process Improvement 

• Read and interpret schematics, wiring diagrams, assembly drawings, and work instructions  
• Record build, test, and rework activities in MES/ERP systems  
• Contribute to development and improvement of manufacturing processes, work instructions, and tooling  

Lab & Production Support 

• Maintain ESD-safe workspaces and follow contamination/FOD control procedures  
• Support calibration and upkeep of lab equipment  
• Collaborate cross-functionally with Electrical, Systems, Test, Manufacturing, and Quality Engineering teams 

Required Skills and Experience 

• 2–5+ years of hands-on experience as an electrical/electronics technician in aerospace, defense, or high-reliability manufacturing  
• Proficiency in:  
• Wire harness fabrication (crimping, soldering, shielding, connector assembly)  
• PCB assembly and rework (SMT and through-hole)  
• Reading schematics, wiring diagrams, and engineering drawings  
• Experience using standard electrical test equipment:  
• Multimeters, oscilloscopes, power supplies, continuity testers  
• Strong troubleshooting skills at component, board, and system level  
• Familiarity with IPC standards (J-STD-001, IPC-A-610, IPC/WHMA-A-620)  
• High attention to detail with commitment to quality and workmanship standards  
• Ability to work in fast-paced development and production environments 

Desired Skills and Experience: 

• Experience with spacecraft, satellite avionics, or aerospace hardware  
• Current IPC certifications (J-STD-001, IPC-A-610, IPC/WHMA-A-620)  
• Experience with:  
• RF coax, high-speed data cables, and specialized connectors  
• Environmental testing (TVAC, vibration, thermal cycling)  
• Cleanroom operations (ISO 7 / ISO 8) and contamination control  
• Familiarity with:  
• Altium Designer or ECAD tools  
• MES/ERP systems and digital work instructions  
• Linux-based test environments or automated test systems  
• Ability to support prototype through production builds and process scaling  
• Experience contributing to process development, tooling, or work instruction improvements   

Education & Work Experience: 

• High School Diploma, Associate degree, or technical certification in Electrical Engineering Technology or related field preferred 
• Typical experience level: 
• Entry-Level: 2+ years relevant hands-on technician experience 
• Mid-Level: 4–6+ years with strong autonomy in build, test, and troubleshooting 
• Equivalent combination of education, military training, or trade school experience will be considered 

Compensation: 

Hourly Base Rate Range: $30.00 - $50.00/per hour 
Base pay is one part of our total compensation package (base+equity) and is determined within a range. Your actual base rate will be determined on job-related knowledge and skills, education, and experience.  Our benefit plans include medical, dental, and vision insurance, 401k retirement plan, short and long term disability and life insurance. We also offer PTO, along with 11 paid holidays, sick time, and paid parental leave. 

This is a full-time position in San Jose, California. This position requires access to export-controlled commodities, technical data, technology, software, and services. U.S. citizenship, U.S. legal permanent resident status, or protected person status under 8 U.S.C. § 1324b(a)(3) is required.  

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. 

To all recruitment agencies: Momentus does not accept agency resumes. Please do not forward resumes to our employees or any company email. Momentus will not be responsible for any fees related to unsolicited resumes.   

Figure is an AI Robotics company developing a general-purpose humanoid. Our Humanoid is designed for corporate tasks targeting labor shortages and jobs that are undesirable or unsafe. We are based in San Jose, CA and require 5 days/week in-office collaboration. 

We are looking for a Global Supply Manager to create and own commercial relationships with our suppliers and manufacturing partners. You will be owning setting up our supply chain, helping determine where we manufacture the robots and how we get from prototype to production volumes.

Responsibilities

• Strategic Sourcing: 
  • Develop and execute global sourcing strategies for PCBAs, identifying and qualifying new suppliers worldwide.
  • Conduct market research and analysis to identify industry trends, cost drivers, and emerging technologies in PCBA manufacturing.
  • Negotiate contracts with suppliers, ensuring favorable pricing, terms, and service levels.
  • Manage supplier relationships, fostering collaboration and continuous improvement.

• Procurement: 
  • Oversee the procurement process for PCBAs, ensuring compliance with company policies and procedures.
  • Manage purchase orders, track shipments, and resolve any supply chain disruptions.
  • Collaborate with internal stakeholders (engineering, production, quality) to ensure PCBA specifications and requirements are met.

• Supply Chain Management: 
  • Optimize inventory levels of PCBAs to balance cost, lead time, and demand variability.
  • Implement supply chain risk mitigation strategies, including supplier diversification, buffer stock, and alternative sourcing options.
  • Monitor supplier performance, track key metrics, and drive continuous improvement initiatives.

• Cost Management: 
  • Identify and implement cost reduction opportunities across the PCBA supply chain.
  • Analyze cost data, negotiate pricing, and optimize procurement processes to achieve cost savings targets.

• Quality Management: 
  • Collaborate with suppliers and internal quality teams to ensure PCBA quality meets or exceeds company standards.
  • Participate in supplier audits and quality reviews.
  • Drive continuous improvement in supplier quality performance.

Others: 

• Negotiate long-term deals and supply agreements which will let us build our humanoid robot
• Select a contract manufacturer to build critical components for the humanoid robot with input from engineering
• Work with our business team and track robot and auxiliary equipment costs. Analyze areas to improve.
• Collaborate closely with cross-functional teams, including engineering and manufacturing, to align sourcing activities with the company's product development and production timelines.

Requirements

• 7+ years of experience in supply chain development, or sourcing management
• Hands-on experience in many of the following: PCBA, FATP, PCB, EE components, Contract Manufacturer Management,.. etc.
• Excellent, negotiation and communication skills
• Skilled at establishing strong relationships with suppliers and internal stakeholders.
• Ability to travel internationally 25%+

Bonus Qualifications: 

• Engineering degree
• Previous work at a startup or on a very lean team
• Robotics industry experience

The US base salary range for this full-time position is between $140,000 - $220,000 annually.

The pay offered for this position may vary based on several individual factors, including job-related knowledge, skills, and experience. The total compensation package may also include additional components/benefits depending on the specific role. This information will be shared if an employment offer is extended.

About the role

Muon Space is seeking a motivated and enthusiastic Early Career Electrical Hardware Engineer to join our growing team in San Jose, CA. This is an exciting opportunity to contribute to the design, development, and testing of cutting-edge electrical hardware for our next-generation spacecraft. You will work closely with experienced engineers across various disciplines to bring innovative satellite systems to life. 

Responsibilities

• Contribute to the design and development of electrical systems for spacecraft avionics, including areas such as flight computers, power distribution, guidance and navigation, sensors, actuators, and communication systems.
• Participate in schematic capture and PCB layout with the guidance of senior engineers.
• Assist in the bring-up, testing, and validation of newly designed hardware.
• Collaborate with software engineers on the integration and testing of hardware and software components.
• Build and test early hardware prototypes to evaluate design concepts and mitigate risks.
• Work cross-functionally with mechanical, software, systems, and production teams to ensure successful integration and manufacturability of hardware.
• Contribute to the creation of design documentation, test procedures, and reports.
• Participate in design reviews and provide constructive feedback.

Qualifications

• Prefer, but don’t require B.S. or M.S. in Electrical Engineering, Computer Engineering, or a related field.
• 0-3 years of experience in hardware engineering, preferably with exposure to electronic systems (relevant internships and academic projects will be considered).
• Familiarity with basic electronic components, circuits, and test equipment (e.g., oscilloscopes, multimeters, power supplies).
• Exposure to schematic capture and PCB layout software (e.g., Altium, Cadence/Orcad).
• Understanding of microcontroller basics and common communication interfaces (e.g., UART, SPI, I2C).
• Strong problem-solving skills and a hands-on approach to engineering challenges.
• Excellent communication and teamwork skills.
• A strong desire to learn and contribute in a fast-paced, dynamic environment.

Nice-to-have Skills

• Experience with embedded systems or basic embedded programming concepts.
• Familiarity with environmental testing considerations (e.g., vibration, thermal, EMI).
• Exposure to scripting languages like Python for test automation or data analysis.
• Participation in relevant student projects or clubs (e.g., robotics, aerospace).

About the role

Muon Space is seeking a motivated and enthusiastic Senior Electrical Hardware Engineer to join our growing team in San Jose, CA. This is an exciting opportunity to contribute to the design, development, and testing of cutting-edge electrical hardware for our next-generation spacecraft. You will work closely with experienced engineers across various disciplines to bring innovative satellite systems to life. 

Responsibilities

• Contribute to the design and development of electrical systems for spacecraft avionics, including areas such as flight computers, power distribution, guidance and navigation, sensors, actuators, and communication systems.
• Schematic capture and PCB layout
• Bring-up, testing, and validation of newly designed hardware.
• Collaborate with software engineers on the integration and testing of hardware and software components.
• Build and test early hardware prototypes to evaluate design concepts and mitigate risks.
• Work cross-functionally with mechanical, software, systems, and production teams to ensure successful integration and manufacturability of hardware.
• Contribute to the creation of design documentation, test procedures, and reports.
• Participate in design reviews and provide constructive feedback.
• Mentor other engineers and push the team to new heights in your respective domain

Qualifications

• Prefer, but don’t require B.S. or M.S. in Electrical Engineering, Computer Engineering, or a related field.
• 3-8 years of experience in hardware engineering, preferably with exposure to electronic systems (relevant internships and academic projects will be considered).
• Familiarity with electronic components, circuits, and test equipment (e.g., oscilloscopes, multimeters, power supplies).
• Expert level knowledge in schematic capture and PCB layout software (e.g., Altium, Cadence/Orcad).
• Understanding of microcontrollers and common communication interfaces (e.g., UART, SPI, I2C, CAN, Ethernet).
• Experience with embedded systems, embedded programming concepts and comfortable in a Linux development environment
• Strong problem-solving skills and a hands-on approach to engineering challenges.
• Excellent communication and teamwork skills.
• A strong desire to learn and contribute in a fast-paced, dynamic environment.

Nice-to-have Skills

• Familiarity with environmental testing considerations (e.g., vibration, thermal, EMI).
• Exposure to scripting languages like Python for test automation or data analysis.
• Experience with power electronics for space applications (e.g., batteries, GaN switching converters, load switch design)
• Experience with FPGAs, SoC, or embedded linux platforms
• Leadership experience in clubs or on small teams
• Previous startup experience or experience working in a fast paced environment

Figure is an AI robotics company developing autonomous general-purpose humanoid robots. The goal of the company is to ship humanoid robots with human level intelligence. Its robots are engineered to perform a variety of tasks in the home and commercial markets. 

We are looking for a Commercial Launch Service Technician to compliment our superstar team. The role requires technical expertise and strong mechanical ability to troubleshoot and repair our humanoid robot fleet. This role is unique, you will be on the front line during new site deployments, ensuring that both the robots and their supporting hardware are operational and optimized for customer-site.

Responsibilities: 

• Responsible for the physical setup of humanoid robots and necessary site infrastructure at new commercial or residential locations.
• Perform routine maintenance and inspections of the humanoid robot fleet
• Proficient in troubleshooting mechanical, electrical and software-based issues
• Work closely with engineering, build, validation and fabrication teams to resolve issues quickly
• Verify use-case stability on-site and provide direct, actionable feedback to the Development teams to drive product improvements.
• Maintain detailed and accurate records of all maintenance and repairs
• Develop tools and document diagnostic procedures for process improvement
• Heavy travel to customer or development partner sites, up to 75%
• Ability to follow assembly documentation
• Ability to work under short timelines when needed

Requirements: 

• 3+ years experience working with complex systems
• Familiarity with computer based tools such as but not limited to CMD prompt, Google Suite, in house development GUI’s
• Familiarity with electrical hardware based diagnostic tools such as but not limited to Scope, Digital MultiMeter, Current Probes
• Familiarity with torque tools and mechanical assembly
• Ability to read PCB and Harness schematics 
• Full system architecture diagnostic experience and organized diagnostic processes 
• Ability to remove and replace mechanical components up to 50lbs
• Great attitude and excited to face challenges
• Valid Driver's License and clean driving record

Bonus Qualifications: 

• Catia or CAD based program experience
• Fabrication experience
• PCB Rework experience
• DAQ system implementation experience
• Small brushless motor experience
• Harmonic drive, clutches, torque/force sensor  knowledge
• Robotics experience
• Experience using Jira, Confluence, Slack
• IPC 610, 620 or J-Std-001

The US base salary range for this full-time position is between $35 - $65/hr. 

The pay offered for this position may vary based on several individual factors, including job-related knowledge, skills, and experience. The total compensation package may also include additional components/benefits depending on the specific role. This information will be shared if an employment offer is extended.

OUR COMPANY

As an early mover in the in-space transportation and infrastructure services, Momentus is at the forefront of the commercialization of space. With an experienced team of aerospace, propulsion, and robotics engineers, Momentus has developed a cost-effective and energy-efficient in-space transport system. 

OUR PEOPLE

Daring problems require daring solutions.  We boldly charge into uncharted territory knowing that no matter the outcome we will benefit from the journey and move closer to our goals no matter what. Our teams know that working at Momentus means more than building innovative technology, it means creating entirely new markets in the space economy. We are level-headed, business-minded strategic thinkers intent on providing immediate value to our customers today while simultaneously preparing for the vast possibilities of the future. If this sounds like you, we should talk.

JOB SUMMARY

We are seeking an Electrical Avionics Engineer to design, build, test, and fly a variety of avionics units to support Momentus vehicles. This includes high-performance, low cost, and low-mass flight computers, cameras, and power systems. The ideal candidate should be accustomed to working in a fast-paced environment and enjoys working on challenging problems.

Key Responsibilities:

• Develop avionics units in one or more of the following areas: 
  • Flight computer, data handling, and payload interface systems 
  • Power converters and power distribution systems 
  • Attitude determination sensors and cameras 
  • Radio communication systems 
  • High power microwave amplifiers
• Perform PCB schematic capture and layout 
• Perform detailed technical review of electronics design and PCB layouts
• Assist in developing test plans for flight qualification of avionics (TVAC, vibe, thermal, radiation, EMC/EMI, etc.)

Preferred Skills and Experience:

• Experience with schematic capture and PCB layout in Altium Designer 
• Experience designing electronics for the space environment (LEO, GEO and deep space) including radiation, thermal, and vibe
• Experience defining spacecraft avionics architectures and developing associated budgets
• Experience performing radiation test campaigns
• Familiarity with embedded software development
• Deep technical expertise in at least one of the following areas: 
  • High-speed digital design: FPGAs, microprocessors, high speed memory, high speed communication buses 
  • Power electronics: power converters, load switches, etc. 
  • RF electronics: mixers, local oscillators, power amplifiers 
  • Mixed-signal electronics: ADCs and DACs, image sensors, analog front-ends 
• Experience with circuit simulation software such as LTSpice 
• Experience designing fault-tolerant systems 
• Previous experience working on DoD and other USG development and deployment programs
• Ability to hold and maintain a USG Security Clearance

Education & Work Experience:

• BS degree in Electrical Engineering, or a closely related discipline
• 5-8 years relevant experience.

Compensation:

Annual Base Salary Range: $140,000 - $175,000/per year
Base pay is one part of our total compensation package (base+bonus+equity) and is determined within a range. Your actual base salary will be determined on job-related knowledge and skills, education, and experience.  Our benefit plans include medical, dental, and vision insurance, 401k retirement plan, short and long term disability and life insurance. We also offer flexible PTO, along with 11 paid holidays, sick time and paid parental leave.

This is a full-time position in San Jose, California. This position requires access to export-controlled commodities, technical data, technology, software, and services. U.S. citizenship, U.S. legal permanent resident status, or protected person status under 8 U.S.C. § 1324b(a)(3) is required. 

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

To all recruitment agencies: Momentus does not accept agency resumes. Please do not forward resumes to our employees or any company email. Momentus will not be responsible for any fees related to unsolicited resumes.  

Figure is an AI robotics company developing autonomous general-purpose humanoid robots. The goal of the company is to ship humanoid robots with human level intelligence. Its robots are engineered to perform a variety of tasks in the home and commercial markets. Figure is headquartered in San Jose, CA.

We are looking for a Robot Service Technician to compliment our superstar team. The role requires technical expertise and strong mechanical ability to troubleshoot and repair our humanoid robot fleet.

SHIFT - 10:30pm to 7am

Responsibilities: 

• Perform routine maintenance and inspections of the humanoid robot fleet
• Proficient in troubleshooting mechanical, electrical and software-based issues
• Work closely with engineering, build, validation and fabrication teams to resolve issues quickly
• Maintain detailed and accurate records of all maintenance and repairs
• Develop tools and document diagnostic procedures for process improvement
• Occasional travel to customer or development partner sites
• Ability to follow assembly documentation
• Ability to work under short timelines when needed

Requirements: 

• 3+ years experience working with complex systems
• Familiarity with computer based tools such as but not limited to CMD prompt, Google Suite, in house development GUI’s
• Familiarity with electrical hardware based diagnostic tools such as but not limited to Scope, Digital MultiMeter, Current Probes
• Familiarity with torque tools and mechanical assembly
• Ability to read PCB and Harness schematics 
• Full system architecture diagnostic experience and organized diagnostic processes 
• Ability to remove and replace mechanical components up to 50lbs
• Great attitude and excited to face challenges

Bonus Qualifications: 

• Catia or CAD based program experience
• Fabrication experience
• PCB Rework experience
• DAQ system implementation experience
• Small brushless motor experience
• Harmonic drive, clutches, torque/force sensor  knowledge
• Robotics experience
• Experience using Jira, Confluence, Slack
• IPC 610, 620 or J-Std-001

The US base salary range for this full-time position is between $35 - $65/hr. 

The pay offered for this position may vary based on several individual factors, including job-related knowledge, skills, and experience. The total compensation package may also include additional components/benefits depending on the specific role. This information will be shared if an employment offer is extended. 

Figure is an AI robotics company developing autonomous general-purpose humanoid robots. The goal of the company is to ship humanoid robots with human level intelligence. Its robots are engineered to perform a variety of tasks in the home and commercial markets. Figure is headquartered in San Jose, CA.

We are looking for a Robot Service Technician to compliment our superstar team. The role requires technical expertise and strong mechanical ability to troubleshoot and repair our humanoid robot fleet.

SHIFT - 6:30am to 3pm

Responsibilities: 

• Perform routine maintenance and inspections of the humanoid robot fleet
• Proficient in troubleshooting mechanical, electrical and software-based issues
• Work closely with engineering, build, validation and fabrication teams to resolve issues quickly
• Maintain detailed and accurate records of all maintenance and repairs
• Develop tools and document diagnostic procedures for process improvement
• Occasional travel to customer or development partner sites
• Ability to follow assembly documentation
• Ability to work under short timelines when needed

Requirements: 

• 3+ years experience working with complex systems
• Familiarity with computer based tools such as but not limited to CMD prompt, Google Suite, in house development GUI’s
• Familiarity with electrical hardware based diagnostic tools such as but not limited to Scope, Digital MultiMeter, Current Probes
• Familiarity with torque tools and mechanical assembly
• Ability to read PCB and Harness schematics 
• Full system architecture diagnostic experience and organized diagnostic processes 
• Ability to remove and replace mechanical components up to 50lbs
• Great attitude and excited to face challenges

Bonus Qualifications: 

• Catia or CAD based program experience
• Fabrication experience
• PCB Rework experience
• DAQ system implementation experience
• Small brushless motor experience
• Harmonic drive, clutches, torque/force sensor  knowledge
• Robotics experience
• Experience using Jira, Confluence, Slack
• IPC 610, 620 or J-Std-001

The US base salary range for this full-time position is between $35 - $65/hr. 

The pay offered for this position may vary based on several individual factors, including job-related knowledge, skills, and experience. The total compensation package may also include additional components/benefits depending on the specific role. This information will be shared if an employment offer is extended. 

Figure is an AI robotics company developing autonomous general-purpose humanoid robots. The goal of the company is to ship humanoid robots with human level intelligence. Its robots are engineered to perform a variety of tasks in the home and commercial markets. Figure is headquartered in San Jose, CA.

We are looking for a Robot Service Technician to compliment our superstar team. The role requires technical expertise and strong mechanical ability to troubleshoot and repair our humanoid robot fleet.

SHIFT - 2:30pm to 11pm

Responsibilities: 

• Perform routine maintenance and inspections of the humanoid robot fleet
• Proficient in troubleshooting mechanical, electrical and software-based issues
• Work closely with engineering, build, validation and fabrication teams to resolve issues quickly
• Maintain detailed and accurate records of all maintenance and repairs
• Develop tools and document diagnostic procedures for process improvement
• Occasional travel to customer or development partner sites
• Ability to follow assembly documentation
• Ability to work under short timelines when needed

Requirements: 

• 3+ years experience working with complex systems
• Familiarity with computer based tools such as but not limited to CMD prompt, Google Suite, in house development GUI’s
• Familiarity with electrical hardware based diagnostic tools such as but not limited to Scope, Digital MultiMeter, Current Probes
• Familiarity with torque tools and mechanical assembly
• Ability to read PCB and Harness schematics 
• Full system architecture diagnostic experience and organized diagnostic processes 
• Ability to remove and replace mechanical components up to 50lbs
• Great attitude and excited to face challenges

Bonus Qualifications: 

• Catia or CAD based program experience
• Fabrication experience
• PCB Rework experience
• DAQ system implementation experience
• Small brushless motor experience
• Harmonic drive, clutches, torque/force sensor  knowledge
• Robotics experience
• Experience using Jira, Confluence, Slack
• IPC 610, 620 or J-Std-001

The US base salary range for this full-time position is between $35 - $65/hr. 

The pay offered for this position may vary based on several individual factors, including job-related knowledge, skills, and experience. The total compensation package may also include additional components/benefits depending on the specific role. This information will be shared if an employment offer is extended. 

Figure is an AI robotics company developing autonomous general-purpose humanoid robots. The goal of the company is to ship humanoid robots with human level intelligence. Its robots are engineered to perform a variety of tasks in the home and commercial markets. Figure is based in San Jose, CA and requires 5 days/week in-office collaboration.

We are looking for a HW Reliability Technician to build test setups and execute reliability tests in humanoid robot development from prototype through production.

Responsibilities: 

1. Set up and perform reliability tests at component, module and final product levels. 
2. Build and assemble fixtures and functional check stations for reliability tests.
3. Analyze test data to evaluate product performance against technical requirements/specifications.
4. Maintain and debug test equipment to ensure equipment uptime.
5. Assist failure analysis actions such as visual inspection, function check, teardown analysis, electrical debug, and material analysis.
6. Coordinate with external testing and FA partners for outsourced tasks.
7. Manage multiple work streams and test equipment in parallel, assist test planning and scheduling, ensure timely completion of tests, and report out test results.
8. Document reliability test procedure, test observation, analyze test data, report to reliability engineers and crossfunctional teams. 

Requirements: 

1. Minimum 2 year hands-on experience in hardware reliability testing.
2. Strong experience with operation and maintenance of reliability test equipment, such as ED shakers, temperature humidity chambers, shock/drop towers, IP (ingress protection) testers, salt mist/spray testers, Instron machines. 
3. Experience with measurement and data aquisition equipment, such as accelerometers, strain gauges, thermocouples, digital multimeters, source meters, oscilloscopes.
4. Ability to build and dis-assemble test setups, mechanical assemblies with little to no documentation or engineering support, familiar with torque tools.
5. Ability to use basic hand tools and perform electrical hardware tasks including wiring, soldering, and assembling custom harnesses.
6. Ability to interpret engineering drawings, CAD models, PCBA and harness schematics to set up tests and diagnose issues.
7. Ability to read test code, interpret and diagnose test results.
8. Familiarity with computer based tools such as but not limited to CMD prompt, Google Suite, Confluence, Jira, and in house development GUI’s.
9. Ability to manage multiple test flows and equipment in parallel with attention to details.
10. Ability to learn and execute quickly in a dynamic and fast-paced environment, results-driven.

Bonus Qualification:

1. CATIA 3D design tool experience.
2. Reliability test failure modes and mechanisms knowledge. 
3. Failure analysis experience, such as use of microscopes, X-ray/CT.
4. PCB rework experience.
5. Programming experience, e.g. Python, Java, C++.
6. Experience with 3D printing, machining, or other prototype fabrication methods. 
7. Experience with high volume manufacturing processes.
8. Robotics, automotive, consumer product experience.

The US base salary range for this full-time position is between $45-$65 an hour.

The pay offered for this position may vary based on several individual factors, including job-related knowledge, skills, and experience. The total compensation package may also include additional components/benefits depending on the specific role. This information will be shared if an employment offer is extended. 

Join the Trackonomy Team! 

At Trackonomy, our employee value proposition champions your growth through varied responsibilities and a commitment to innovation. Join us to evolve professionally in a company that reshapes both industries and individuals.

Connection & Community: You're essential to Trackonomy's mission, and every team member is regarded as a founder.  Collectively, our goal is to make a lasting impact on the world, making every endeavor at Trackonomy a meaningful journey.

Growth & Development: Dive into diverse roles and learn from our seasoned leaders. Your potential and passion define your trajectory here. We value innovation and offer unparalleled opportunities, making your career journey transformative. At Trackonomy, your growth is multifaceted. Collaborate and learn directly from senior leaders across various departments. Here, your potential—fueled by capability, passion, and results—determines the scope of your role.  At Trackonomy, merit and opportunity outweigh mere experience. It's a level playing field, offering unique opportunities not found elsewhere.

Impact: Trackonomy is dedicated to impactful tech solutions that better our world. From fire prevention to enhanced security, our innovations don't just change industries; they save lives. Join us to be part of meaningful change.

About Trackonomy 

At Trackonomy, we are pioneering a transformative network of interconnected objects. Our goal is to bring inanimate objects to life, giving them the ability to converse, think, and interact in real-time. Envision a world where our devices seamlessly integrate with every physical entity, facilitating a global conversation among them. Our overarching mission is to craft the operating system for the connected world, one object, and sensor at a time.  Our customers are major players in various verticals such as logistics, industrial, utilities, healthcare, and government. They use our solutions for a wide range of applications like predictive maintenance, workflow optimization, asset protection, safety, security, and environmental monitoring. We are a unicorn, funded by top investors like Kleiner Perkins and 8VC.

Our executive leadership team has experience working together for over two decades, having previously held key roles in the C-suites of renowned companies such as Flextronics, Heptagon, GT-Nexus, and Digital Motors Corporation. Together, we have engineered a revolutionary technology that is yielding extraordinary results. 

Are you ready to be a part of the next chapter in Silicon Valley's hyper-growth IoT success story?

You will be a core engineer of our early-stage team. We work on everything from machine learning, to security, to high performance computing, to IoT devices, to dynamic web apps, etc. Don’t be surprised if you get to touch every system while you work here, often teaming up with other team members on critical work. Some examples of projects you may work on:

Candidates must be comfortable working with microcontrollers and low-level hardware control in a test-driven development environment.

The ideal candidate will have experience working with wireless communications modules, IoT technologies, RF protocols and have great troubleshooting and prototyping skills. 

Experience

• Bachelor’s or Master’s degree in Electronics Engineering
• At least 6+ years of embedded software development with emphasis on C/C++
• Background in real-time embedded systems
• Extensive work in firmware development, testing, and system-level bring-up and debugging
• Skilled in bench modifications and rapid prototyping of hardware/firmware solutions
• Strong interpersonal, organizational, and communication skills
• Effective collaborator who shares knowledge, learns from others, and supports cross-functional teams
• Self-starter with strong motivation and ownership mentality

Preferred Skills

• Background in IoT systems and wireless/wired communication protocols, including BLE, LoRa, and LoRaWAN
• Skilled in firmware development on ARM-based microcontrollers and processors; familiarity with Nordic devices is a plus
• Knowledge of cellular protocols such as LTE, LTE-M/NB-IoT, and industrial wireless electronics
• Hands-on work with cellular modems and GPS/GNSS systems
• Ability to develop device drivers for sensors and communication modems
• Strong understanding of subsystem interfaces such as UART, I2C, SPI, and other standard chip-level protocols
• Proficiency in low-power embedded development, including performing power profiling on target devices
• Knowledge of firmware development best practices including testing, documentation, debugging, and code review
• Understanding of PCB design using schematic capture and layout tools (Eagle/Altium preferred)
• Capability to design bootloaders and implement firmware-over-the-air updates
• Familiarity with scripting languages (Python preferred)
• Ability to read and interpret complex electrical schematics
• Strong foundation in microcontrollers and embedded peripheral driver development
• Knowledge of embedded networking protocols such as RSTP, PTP, LLDP, and UDP/TCP is a plus

The salary range for this role is $120,000 to $200,000, plus bonuses and Pre-IPO equity. It is uncommon for anyone to be hired at or near the top range for their role, and final compensation is based on the facts and circumstances of the case. The compensation range is broad because it reflects many factors, including but not limited to skill sets, experience, and training directly relevant to the role, business and company needs, cultural fit, level, and location. 

Why Trackonomy Systems is a Great Place to work:

Culture and Belonging: Our company’s culture isn’t something you join, it’s something you help build. You will be a role model and live our Vision, Mission, and Values. 

Perks: Trackonomy Systems understands that personal wellness is one of the keys to a happy, healthy and productive work environment. We offer Platinum level Health benefits, Flexible and Health Savings Accounts, Commuter benefits, and an Employee Assistance Program.  We also understand you are planning for the future, so we offer a Pre-IPO equity and a 401k plan.

Career Growth: Trackonomy Systems is invested in the growth of our team members and understands that frequent, two-way feedback is critical to that growth. We encourage regular one-on-ones with your manager, a regular schedule of performance reviews, learning and development opportunities, whether that be towards being a great manager, being a great individual contributor, or a lateral move to gain breadth of knowledge and experience.

Trackonomy Systems is proud to ensure equal employment opportunities to all individuals regardless of their race, color, religious creed, national origin, ancestry, physical or mental disability, sex, gender, gender identity, gender expression, sexual orientation, age, medical condition, genetic information, marital or registered domestic partnership status, military or veteran status, or any other characteristic protected by state, federal, or local law. 

We strive to provide a stellar experience throughout the application process and ensure all applicants will be given proper consideration based solely on merit and Trackonomy’s business needs.

Trackonomy Systems is dedicated to working with and providing reasonable accommodations to individuals with physical and mental disabilities. If you need assistance or accommodation due to a disability while interviewing, please contact hr@trackonomysystems.com.