** This position is not eligible for visa sponsorship for external candidates. Candidates cannot require sponsorship now or in the future**

Job’s mission

Our Global Sales, Services & Spares IQ and Sustaining teams are seeking Snr Engineers I & II, Field Service (level will depend on experience, degree and responsibilities. Please review below) to join ASM at a customer site (TSMC) in North Valley, AZ. Domestic and International travel of at least 75% will be required for this role. As a Senior Field Service Engineer at ASM, you’ll play a critical role in supporting the advanced semiconductor equipment that powers the world’s most transformative technologies. You’ll take the lead on complex troubleshooting, guide and mentor engineers, and strengthen our partnerships by helping customers achieve stable, high‑performance fabrication environments. Your expertise will make a direct impact on tool reliability, customer satisfaction, and the next generation of ASM technology.

What you will be working on

Senior Engineer I, Field Service

• Install, maintain, and repair ASM semiconductor equipment with minimal supervision
  • Lead troubleshooting of complex tool or process issues using structured diagnostic methods
  • Perform root‑cause analysis and recommend targeted, data‑driven corrective actions
  • Review tool‑performance data to identify trends, risks, or improvement opportunities
  • Provide technical guidance and on‑the‑job coaching to less‑experienced engineers
  • Document service activities and support updates to procedures and best practices
  • Communicate solutions, progress, and expectations clearly with customer engineers
  • Participate in escalations alongside cross‑functional ASM engineering teams

Senior Engineer II, Field Service

• Serve as the senior technical lead for equipment installation, performance optimization, and recovery
• Diagnose and resolve highly complex, multi‑factor tool and process issues with limited guidance
• Lead advanced root‑cause analysis and drive long‑term corrective‑action plans that influence global engineering improvements
•  Own the customer‑technical relationship: build trust, anticipate operational needs, and act as ASM’s senior technical representative onsite
• Manage escalations end‑to‑end, aligning expectations, coordinating cross‑functional teams, and communicating clear action plans
• Guide, mentor, and develop engineers through hands‑on instruction, structured training, and knowledge‑sharing
• Champion best practices and contribute to procedure development, improvements, and field‑wide learning
•  Provide detailed field insights to R&D, product, and design teams, including support for beta tools or early‑option deployments

What we are looking for

Senior Engineer I, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 6+ years of experience, OR a Master’s degree with 4+ years of experience OR PhD degree with 0+ years of experience.
• Experience of semiconductor field service or capital‑equipment experience
• Ability to interpret electronic and electromechanical schematics
•  Experience with structured troubleshooting methodologies
• Knowledge of cleanroom and semiconductor safety protocols
• Strong written and verbal communication skills
• Ability to work independently and collaboratively in fast‑paced fab environments
• Willingness to travel domestically and internationally as needed for the role. 
• Proficiency in MS Office

Senior Engineer II, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 8+ years of experience, OR a Master’s degree with 6+ years of experience OR PhD degree with 4+ years of experience.
• Experience in semiconductor field service experience with demonstrated technical leadership
• Advanced knowledge of tool architecture, control algorithms, and multi‑factor troubleshooting
• Experience driving structured root‑cause analysis and long‑term corrective‑action plans
• Proven ability to lead escalations and manage customer‑technical relationships
• Strong communication and mentorship capabilities
• Ability to work autonomously while guiding and developing other engineers
• Willingness to travel domestically and internationally as needed for the role
• Proficiency in MS Office

What sets you apart

Senior Engineer I, Field Service

• Experience supporting beta tools or early‑option equipment
• Knowledge of wafer‑fab operations, robotics, vacuum systems, plasma, RF, or gas handling
• Experience writing or updating procedures or technical documentation
• Strong customer‑service approach and organizational skills
• Familiarity with structured problem‑solving methods

Senior Engineer II, Field Service

• Demonstrated leadership in complex troubleshooting programs or technical initiatives
• Experience owning customer‑technical relationships, including expectations and long‑term partnership building
• Strong capability in mentoring and developing field engineers
• Hands‑on expertise with fab robotics, vacuum systems, plasma, RF, or gas‑delivery systems
• Experience providing structured feedback to engineering or product teams
• Experience evaluating or supporting beta‑stage or early‑option tools

** This position is not eligible for visa sponsorship for external candidates. Candidates cannot require sponsorship now or in the future**

As a Field Service Engineer – Early Career, you’ll take on a hands-on role supporting ASM’s advanced semiconductor equipment and helping our customers keep their fabs running at peak performance. You’ll build real-world expertise through structured training, mentorship, and on-the-job learning while working directly with technologies that power AI, 5G, cloud computing, and next‑generation devices. This is your chance to apply your engineering background, strengthen your technical capabilities, and join a team that’s shaping the future of semiconductor innovation.

In this role, based in North-Valley/Phoenix, AZ at our customer site, you’ll launch your engineering career at the center of cutting‑edge semiconductor manufacturing. It’s an ideal opportunity for early‑career engineers who want to put their education into practice in a high‑tech environment where every day brings something new to learn.

From your first day, you’ll receive training through hands‑on guidance from seasoned engineers onsite. You’ll work with vacuum systems, plasma, chemical delivery, robotics, sensors, advanced metrology, and complex hardware‑software interactions. Your contributions will have a direct impact on tool performance, system uptime, and customer success—playing a meaningful role in enabling leading‑edge logic technology nodes. This experience lays a strong foundation for rapid growth, technical mastery, and a variety of long‑term career paths within ASM.

Shifts available:

Mon-Fri- 8am-5pm (subjected to OT)

What You Will Be Working On 

• Support installation, maintenance, and repair of ASM semiconductor equipment at customer sites 
• Troubleshoot equipment and process issues with guidance from senior engineers 
• Deliver clear, timely, customer‑focused support with a strong safety mindset 
• Working in cleanroom environments while following strict safety and quality standards.
• Assist in identifying and contributing to continuous improvement efforts  
• Participate in customer escalations alongside experienced team members 

What We Are Looking For 

• Bachelor’s or master’s degree in Electromechanical Engineering, Electrical Engineering, Mechanical Engineering, or related field 
• Candidates who are hands-on and mechanically curious, energized by complex systems and real-world problem solving, Comfortable working in fast paced, hightech environments & motivated to build a long-term engineering career. 
• Internship, co‑op, senior design project, lab research, or hands‑on technical experience 
• Ability to read and interpret basic electronic and electromechanical schematics 
• Understanding of safety protocols and willingness to work in cleanroom environments 
• Strong problem‑solving mindset and eagerness to learn 
• Clear communication skills and a strong customer-service mindset 
• Ability to work independently and collaboratively 
• Willingness to travel domestically and internationally 
• Proficiency with Microsoft Office 

What Sets You Apart 

• Demonstrated commitment to safety, quality, and disciplined execution 
• Exposure to semiconductor processes, wafer fabs, robotics, vacuum systems, plasma, or gas handling 
• Experience writing technical documentation in school or project settings 
• Familiarity with customer‑facing or support roles (internships, tutoring, help desk, teamwork) 
• Interest in structured problem‑solving methods, statistical methods, data analysis. 
• Curiosity and learning orientation when working with advanced semiconductor technologies 
• Participation in engineering clubs, competitions, or technical student groups 

Why join ASM? 

2026 is the year to join ASM as a Field Service Engineer. Apply now! 

We are seeking a Preconstruction Manager to support some of the most innovative, complex, and large-scale data center and mission-critical construction projects in the country. This role will be instrumental in delivering RMCI’s first-generation programs as a General Contractor within hyperscale and enterprise data center environments. 

The Preconstruction Manager provides leadership, structure, and technical expertise across all preconstruction activities at RMCI. Working closely with the Chief Estimator, this role ensures that project pursuits, design development, cost modeling, and early‑phase planning are executed with accuracy, clarity, and strategic intent.

Responsibilities

• Design Management & Technical Coordination
  • Manage design-phase communication between RMCI, owners, and design partners.
  • Lead constructability reviews, design coordination meetings, and technical evaluations.
  • Track design evolution and communicate cost, schedule, and risk impacts to the Chief Estimator.
  • Provide guidance on logistics, phasing, site constraints, and feasibility during design development.
  • Support development of early schedules, general conditions, and procurement strategies.
• Estimating Partnership & Cost Development
  • Align preconstruction strategy with estimating strategy to ensure consistent assumptions, scope clarity, and pricing logic.
  • Review plans, specifications, and addenda to identify scope gaps, risks, and opportunities, coordinating with the Chief Estimator on pricing impacts.
  • Support subcontractor outreach, prequalification, and pricing strategy in collaboration with Estimating Team.
  • Participate in GMP development, cost trending, and buyout strategy discussions.
• Documentation, Communication & Workflow Management
  • Oversee all preconstruction documentation, ensuring accuracy and timely distribution.
  • Review and approve meeting minutes, action logs, and document control outputs prepared by the Preconstruction Coordinator.
  • Maintain alignment between preconstruction deliverables, estimating outputs, and project handoff requirements.
• Leadership, Department Oversight, and Internal Collaboration
  • Lead RMCI’s preconstruction efforts with strategic guidance from the VP of Preconstruction.
  • Provide mentorship, direction, and workflow oversight to the Preconstruction Coordinator.
  • Lead turnover meetings, ensuring assumptions, risks, and cost models are clearly communicated.
  • Develop and refine RMCI’s preconstruction standards, templates, processes, and best practices as the department grows.
  • Foster strong collaboration across Estimating, Project Delivery, Operations, Marketing, and Business Development.
• Client, Partner & Trade Partner Engagement
  • Build and maintain strong relationships with owners, designers, subcontractors, and vendors.
  • Lead or support client-facing cost reviews, design meetings, and pursuit presentations.
  • Represent RMCI professionally at industry events, meet‑and‑greets, and preconstruction meetings.

Qualifications

• 5–10 years of experience in preconstruction, estimating, or design management within industrial construction or mission critical facilities.
• Strong understanding of estimating principles, design development, and alternative delivery methods (CMAR, Design‑Build, Design‑Assist).
• Skilled in conceptual estimating, cost modeling, and reviewing plans/specifications for scope gaps and risks.
• Strong communication and client‑facing presentation skills.
• Proficiency with Microsoft Office; experience with Bluebeam, BuildingConnected, and estimating software preferred.
• Highly organized, detail‑oriented, and able to manage multiple pursuits in a fast‑paced environment.
• Experience mentoring or overseeing junior team members.

Education & Certifications

• Required
  • Bachelor’s degree in Construction Management, Engineering, Architecture, Business, or related field
  • Minimum of five years of experience in preconstruction and estimating roles
• Preferred
  • Advanced coursework or certifications in estimating, preconstruction project management, or construction technology.
  • Experience in general contracting, industrial construction, and mission critical facilities.
  • Training or proficiency in estimating software (Sage, OST, Assemble, etc.).

Safety Level
This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

Responsibilities

Qualifications

Responsibilities

Qualifications

We are currently seeking highly motivated Design Modelers to join our team. Design Modelers create and develop accurate 3D models that support estimating, coordination, and construction workflows throughout the project lifecycle.

Responsibilities:

• Create discipline-specific 3D models based on design intent, standards, and project requirement
• Utilize collaboration system (Navisworks) to coordinate model content with other trades involved in the project
• Maintain accurate and organized model geometry throughout the project and apply QA/QC standards
• Interpret drawings, specifications, and field inputs to ensure 3D model accuracy
• Work under supervision to learn and follow Design and project specific modeling standards and processes
• Support coordination efforts by updating and refining model content as direction is provided
• Identify modeling issues or conflicts and communicate them to the Design team for review and resolution
• Document and track modeling progress to support project reporting

Qualifications:

• Experience or technical education in BIM, CAD, drafting, engineering, or construction
• Strong spatial understanding and ability to interpret 2D documents into accurate 3D geometry
• Good problem-solving abilities and attention to detail
• Organized, systematic, and able to perform detailed technical tasks
• Willingness to follow direction, learn new processes, and grow within the team
• Knowledge of mechanical, electrical, or construction systems is highly preferred
• Experience with BIM software (Revit, AutoCAD, or similar) is a plus
• Strong interpersonal skills and ability to work within a team environment

Safety Level 

We are currently seeking a Design Superintendent who will be responsible for overseeing the development of Design Coordinators and ensure consistent execution of processes, procedures, and quality standards across the design department. The Design Superintendent plays a key leadership role in supporting Design Coordinators by reinforcing daily goals, ensuring accountability, and maintaining alignment with NOX’s standards of excellence. This role requires a balance of people’s leadership, process discipline, and quality assurance.

Responsibilities 

• Mentor, train, and develop Design Coordinators with a strong emphasis on electrical systems, constructability and field application to ensure technical and professional growth.
• Support Design Coordinators in setting and reinforcing daily and weekly priorities for their teams.
• Assist in workforce planning by monitoring resource needs, team workloads, and coordinator development progress.
• Address HR and employee-related issues promptly, ensuring alignment with company values and policies.
• Foster a culture of accountability, collaboration, and continuous improvement.
• Ensure all design processes, workflows, and procedures are followed and implemented consistently across projects.
• Support the Director of Design in rolling out new standards, tools, or process updates, ensuring smooth adoption by teams.
• Monitor compliance with company policies and give feedback, coordinating with Workforce Development on training and accountability.
• Oversee QA/QC practices to ensure deliverables meet standards, partnering with Workforce Development to reinforce quality in training.
• Conduct regular checks of design outputs to confirm accuracy, completeness, and alignment with project expectations.
• Provide feedback and coaching to Design Coordinators and Design Modelers on quality-related improvements.
• Act as a communication bridge between coordinators, managers, and leadership, ensuring alignment and accountability.
• Escalate issues or concerns to the Director of Design as needed while supporting resolution at the team level.
• Ensure design team members have the tools, support, and guidance needed to meet their responsibilities.

Qualifications

• 5+ years of experience in design, BIM, construction, or related technical field with strong knowledge of electrical background.
• Proven leadership experience supervising or mentoring teams.
• Strong knowledge of design workflows, QA/QC practices, and process management.
• Excellent communication, organizational, and problem-solving skills.
• Ability to manage employee relations with professionalism and fairness.
• Experience with design tools such as Revit, AutoCAD, or Navisworks (preferred but not required).
• Strong interpersonal skills with the ability to build trust and accountability across team.
• Strong written and verbal communication skills.
• Field experience (preferred).

Safety Level 

This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

• The inherent responsibilities of your role may include physical working conditions. In order to safely and successfully perform job duties you must be able to:  
• Potentially lift up to 50 pounds 
• Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing  
• Potentially operate a motor vehicle, crane, tractor, etc.  
• We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance with the Americans with Disability Act (ADA)

Nox Innovations is now hiring a Fabrication Worker for our Reno, Nevada location. The ideal candidate will demonstrate knowledge of basic hand tools and power tools. This person will assist in and/or perform under supervision of all aspects of fabrication to support the construction industry. They will be tasked with miscellaneous task including but not limited to material handling assembly of prefabricated systems, and other general labor tasks. This position will require mechanical aptitude, mathematical skills, and literacy skills to meet the position’s primary needs.

Responsibilities

• Fabrication & Assembly: Operate machinery (including but not limited to drilling/deburring hand tools, welders, cutters, grinders, hydraulic CNC equipment) to fabricate parts and assemble components according to specifications.
• Blueprint Reading: Interpret technical drawings, blueprints, and specifications to determine the materials, dimensions, and procedures needed for fabrication.
• Quality Control: Inspect and measure finished products to ensure they meet the required quality standards and specifications.
• Maintenance & Safety: Perform routine maintenance on tools and equipment to ensure safe and efficient operation. Adhere to safety protocols and workplace standards.
• Material Handling: Prepare and organize materials needed for the fabrication process, including cutting and shaping metals, plastics, and composites.
• Collaboration: Work closely with other team members to ensure timely production and resolve any issues that arise during the fabrication process.
• Documentation: Maintain accurate records of work orders, production schedules, and inventory usage.
• Problem-Solving: Troubleshoot and resolve issues related to fabrication processes, machinery, or materials.
• Perform jobsite housekeeping and general labor
• Perform other Prefab related duties and assignments as instructed by Supervisor

Qualifications

• Ability to read and interpret technical drawings, blueprints, instructional manuals and understand specifications
• Knowledge of safety procedures and best practices in a manufacturing environment.
• Basic math skills for measuring, calculating dimensions, and material quantities.
• Proficiency in using fabrication tools and machinery
• Ability to lift heavy materials up to 50lbs and stand for extended periods. Comfort with handling tools and machinery·
• Self-motivated and eager to learn
• Ability to follow directions, both written and verbal
• Ability to lift 50 pounds, unassisted, frequently throughout the day
• Ability to stand or be on your feet for long periods of time
• Ability to do the following: bending, squatting, crawling, climbing, kneeling, balancing, pushing, pulling, reaching overhead, and repetitive use of arms, hands, and fingers

Experience:

• Previous experience in a fabrication, manufacturing, or mechanical environment is preferred. Experience with welding, cutting, or machine operation is a plus.

Education & Certifications

• High school diploma or equivalent; technical certifications or training in fabrication or welding are advantageous.

Safety Level

This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

• The inherent responsibilities of your role may include physical working conditions. In order to safely and successfully perform job duties you must be able to:  
• Potentially lift up to 50 pounds 
• Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing  
• Potentially operate a motor vehicle, crane, tractor, etc.  
• We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance with the Americans with Disability Act (ADA)

#NXCLIND1

As a Purchasing Agent, you will be assigned to a specific construction market within our scope of work, playing a pivotal role in ensuring the success of each project from inception to completion. Your responsibilities will encompass vendor management, procurement processes, and ensuring smooth coordination between various teams. You’ll help manage the flow of materials and services, contribute to strategic decision-making, and ensure projects stay on track by delivering on time and within budget.

Location: Phoenix, AZ

Responsibilities

• Build and maintain strong relationships with vendors, continuously enhancing your knowledge of their offerings and capabilities.
• Support estimating personnel with vendor contacts, real time pricing, and lead times for specific items.
• Assist in the decision-making process for awarding engineered buyout and commodity packages. Compile quotes by material type and project phase, and request updated, discounted pricing from vendors using in-house procurement software.
• Create and manage “Hold for Release” purchase orders, and request cutsheets for submittal. Deliver completed procurement plans to the project team for final approval.
• Act as liaison between operations and distribution, ensuring constant, quality communication, detailed tracking logs, complete packing slips, organized deliveries, proper palletization of material and clear Proof of Delivery.
• Help source back-ordered items, confirming change orders to buyout packages, managing return/replacement logistics and being their sole source for procurement.
• Oversee all rental requests across the enterprise, ensuring timely and accurate rental equipment availability. Become an expert in the rental software we use, provide training to operations teams, and manage committed cost forecasting.
• Work closely with the accounting team by regularly reviewing open purchase orders in our payment software. Ensure that committed costs and received amounts are accurate, resolve any discrepancies, and close out completed purchase orders.

Qualifications 

• 5+ years of procurement/purchasing experience, preferably in construction.
• Moderate to strong familiarity with electrical commodity material.
• Strong Interpersonal and collaborative skills.
• Moderate technical skills for software training and implementation.
• Task oriented, adaptable and organized.
• Must have Reliable transportation for commute and occasional jobsite visits.

Education & Certifications

• High School diploma or GED

Safety Level
This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

#NXCLIND1

The primary function of the Human Resource Administrator is to support the NXG People department in driving the operations, administration, culture, and values to our growing workforce. The HR Administrator role will focus heavily on executing on the various administrative tasks within the department as well as answering questions from across the company to help support the workforce. The ideal candidate will be organized, have great time management skills, and service oriented to provide the best employee experience.

Responsibilities

• Manage the HR Inbox, answering and assisting with all questions and triaging incoming emails
• Gather information needed to respond to incoming mail and employee requests, including employment verifications, electrical verification applications, wage claims, unemployment requests, etc.
• Assist with benefits administration, processes, and questions
• Support onboarding new hires as needed, including sending appropriate communications after hire
• Maintains Human Resource Information System records and QA/QC as needed; provide technical guidance
• Assist with ongoing HR audits
• Manage various projects, including employee anniversary recognition, baby baskets, and others as needed
• Complete HR admin operations duties such as processing separations, etc.
• Provide Nox Group and HR policy guidance and interpretation
• Gather and send reports, internally and externally as needed
• Assist with SOPs and process documentation
• Other duties as assigned

Qualifications

• Bi-lingual in Spanish/English preferred
• Highly proficient in Microsoft Excel
• Must be able to handle sensitive and confidential information
• At least 1 year of HR experience, preferably in construction

Education & Certifications

• Bachelor’s degree in a relevant field preferred but not required.

Safety Level

This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

#NXCLIND1

We are seeking a driven, resourceful Talent Acquisition Specialist to join our Recruiting Team and support hiring for some of the most innovative, complex, and large-scale data center and mission-critical construction projects in the country.

This role is ideal for a recruiter who thrives in fast-paced, high-demand environments, enjoys tackling hard-to-fill roles, and is motivated to act as a true talent partner to the business — not just an order taker. You will play a key role in identifying, engaging, and securing top talent across our enterprise while helping shape recruiting strategies that directly impact project success.

Responsibilities:

• Manage the full-cycle recruiting process for professional, technical, and operational roles across the enterprise
• Partner closely with hiring managers and business leaders to develop proactive recruiting strategies, not just fill open requisitions
• Source hard-to-find talent using a variety of tools, networks, and creative sourcing methods
• Conduct thoughtful candidate screenings to evaluate technical capability, culture fit, and long-term potential
• Act as a trusted advisor to hiring managers, providing guidance on talent availability, market conditions, and hiring strategy
• Build and maintain strong pipelines for both high-volume and specialized roles
• Develop meaningful relationships with candidates and effectively sell opportunities and company value
• Coordinate interviews and maintain strong communication with candidates and stakeholders throughout the hiring process
• Participate in job fairs, networking events, and industry outreach to expand talent pipelines
• Support candidate onboarding to ensure a smooth and successful start
• Provide market intelligence and recruiting insights to leadership to improve hiring outcomes
• Collaborate with recruiting and marketing teams to support employer branding and recruitment marketing efforts
• Maintain accurate and organized recruiting activity within the Applicant Tracking System (ATS) (Greenhouse)

Qualifications

• 2+ years of recruiting experience, preferably in construction, engineering, technical, skilled trades, or other fast-paced industries
• Demonstrated success sourcing and hiring for hard-to-fill and/or high-volume roles
• Proven ability to build strong relationships with hiring managers and candidates
• Strong sourcing skills and experience utilizing tools such as LinkedIn Recruiter, Indeed, ZoomInfo, job boards, and social media
• Ability to prioritize multiple roles while maintaining attention to detail and urgency
• Comfortable working in a fast-paced, high-growth environment
• Strong communication skills with the ability to influence and guide hiring decisions
• Experience using an ATS (Greenhouse preferred)
• Proficiency in Microsoft Office applications

Education & Certifications

• Bachelor’s degree in Human Resources, Business, or a related field preferred, or equivalent experience

Safety Requirements

This is a safety-sensitive position, and all applicable policies including drug testing and background checks will apply.

 #NXCLIND1

Nox Group of Companies is seeking an IT Coordinator to join our growing team in Phoenix, Arizona!  

This position coordinates assets and requests for the IT department. This relates to all technology, including workstations, servers, printers, networks, cell phones, desk phones, and vendor-specific hardware and software. The role also implements internal systems and assists IT team members with requests. This position will help Nox Group and its companies grow.

Responsibilities

• Entering devices into the system
• Audit device list for accuracy
• QA device setups
• Ensure IT Requests are moving and the device pickup pile is accurate
• Monitor Shipping for devices
• Ensuring Backlog of devices are accurate
• User Setup
• Separations
• Monitor the ticketing system for stale tickets
• System documentation of maintenance and upgrades.
• Communicate with users as required: keep them informed of incident progress.
• Document maintenance for all computer systems and network infrastructure.
• Review documentation and ensure it meets enterprise standards.
• Review inventory for out-of-date/spec devices

Qualifications

• Detail oriented
• Ability to work in a team and communicate effectively.
• Business awareness: specific knowledge of the users and how IT relates to their department strategy and goals.
• Ability to multi-task and adapt to changes quickly.
• Technical awareness: the ability to match resources to technical issues appropriately.
• Provide service awareness of all organizations' critical IT services for which support is provided.
• Self-motivated with the ability to work in a fast-moving environment.
• Office 365

Education/Certifications

Safety Level
This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

• The inherent responsibilities of your role may include physical working conditions. In order to safely and successfully perform job duties you must be able to:  
  • Potentially lift up to 50 pounds 
  • Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing  
  • Potentially operate a motor vehicle, crane, tractor, etc.  
• We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance to the Americans with Disability Act (ADA)

#NXCLIND1

About the Role

Our Product Pricing & Monetization team sits at the intersection of product and commercial strategy, responsible for holistic pricing and packaging across Gusto's full product suite.

We're looking for a Senior Pricing and Monetization Manager to focus across our platform. portfolio including Gusto Payroll, Gusto Time management and HR, and our suite of embedded financial services for employers and employees. You'll collaborate closely with product, sales, marketing, data, engineering, and finance, with work that is visible to Gusto leadership.

What You'll Do

• Work in partnership across Product, Finance, Marketing, and Go-to-Market to review and recommend monetization and pricing strategies for new product launches and our existing portfolio.
• Be a world-class operator, owning and delivering on cross-functional projects and commercial go-to-market initiatives. In an AI-native environment, strategy, ownership, and execution goes broad. You will be asked to learn, adapt and grow your range of expertise.
• Help shift from a commercial strategy and operations function, to an AI-powered builder program. You’ll ship MVPs, Proof of Concepts, and pilots right into market.
• Decide, Build, and Monitor the key Pricing and Monetization KPIs across our product and go-to-market portfolio.
• Be the pricing and monetization expert and go-to-partner for Monetization and Commercial strategy.
• Work closely with key stakeholders such as: Product, Product Marketing, Sales, Data Science, and Finance. Products will have direct executive line-of-sight and direct impact to our product and business.

What We're Looking For

• Background in fintech, business banking, retirement, E-commerce, payroll, or HR back office SaaS
• Background in B2B / B2C Saas in Payroll, HR, Fintech, ECommerce or related field.
• An AI-native operator who can go from strategy to execution quickly, building Agents instead of processes. You’ll be an expert in Claude.ai, Claude Code, and Cursor.
• A strong analytical mindset with strong attention to detail and creative problem-solving ability. Able to use AI tools to conduct end-to-end technical data analysis.
• Executive relationship management and communication. You’ll be presenting and working on topics for our executives, board, and senior leaders across Gusto.
• Exceptional cross-functional stakeholder management and relationship-building skills. Your success will be defined by your ability to move a broad set of stakeholders towards a common goal.
• Clear, concise communicator, able to distill complex ideas for any audience
• Thrives in fast-moving environments; able to pivot quickly and manage competing priorities
• Curious, growth-oriented, and genuinely passionate about pricing

Nice to Have

• Experience developing and delivering pricing and go-to-market recommendations in product, marketing, finance, or consulting.
• Experience with technical pricing research, like conjoint or max diff analysis, or other quantitative research techniques. 
• Expertise in technical data analysis skills, like SQL, Python or R. Expect underlying foundation coupled with ability to use AI to execute.
• Familiarity with the latest AI tools to help with coding or data analytics tools such as Claude, Cursor, Gumloop

Compensation

Our cash compensation amount for this role is targeted at $152,000 - $180,000/yr in Denver, Phoenix, and Atlanta, and $180,000 - $218,000/yr for San Francisco & New York. The salary range for Toronto is CAD 133,000 - 160,000. Final offer amounts are determined by multiple factors including candidate experience and expertise and may vary from the amounts listed above.

#LI-Hybrid

Legend Biotech is seeking a Cell Therapy Account Specialist, Overlay (Contractor) as part of the Commercial team based in (Phoenix, AZ, Dallas, TX, San Antonio, TX).

Role Overview

The Cell Therapy Account Specialist is responsible for representing Legend’s products and services to a defined customer base, generating and growing sales and consistently achieving or exceeding sales targets within a specific geographic area.

Key Responsibilities

• Work in partnership to drive Carvykti as the preferred CAR-T therapy for multiple myeloma among both community and institution-based oncology customers. This role involves collaborating with other Carvykti representatives to coordinate activities for impactful engagement within the territory.
• Comprehensive understanding of Legend and competitor products in our therapeutic area, and an in-depth knowledge of the complexities associated with the disease state.
• Ability to navigate a complex account environment and understand the needs/issues of various stakeholders at all levels within the account and triage to appropriate internal stakeholders for support.
• Develops an understanding of the issues and opportunities unique to each geography.
• Provides all insights to the cross functional team on appropriate and timely feedback from interactions with healthcare professionals (HCPs), including account business trends and potential changes in therapeutic landscape.
• Leverages intel and insights to develop and assertively implements an account business plan to meet customer needs and achieve corporate goals.
• Works cooperatively with internal team members on various cross-functional projects related to specific accounts or physicians. May work in collaboration with outside partner companies to co-promote products or services.
• Assists in the identification/resolution of issues and opportunities and communicates proactively to marketing and sales management. Manages a territory budget plan for customer engagements, speaker events and other miscellaneous external expenditures.
• Represents Legend at National and/or local symposiums/conventions.
• Demonstrates initiative and willingness to work hands-on with a sense of urgency, in a fast-paced entrepreneurial environment.
• Demonstrates leadership among peers by consistent application and modeling of appropriate, compliant behavior, and conduct.
• Performs all administrative functions required for the position, including reporting call activity and customer information into the appropriate call reporting system in a timely manner, submitting expenses, etc.
• Reports adverse events to Legend’s Drug Safety department and other internal departments as appropriate per required guidelines.
• Actively promotes the appropriate use of Legend’s products to healthcare professionals in accordance with Corporate, PhRMA, and OIG guidelines.
• Strict compliance with all regulatory agencies, state, and federal law is required.
• Adheres to company policies, procedures, and business ethics.

Requirements

• Bachelor’s Degree from accredited college or university.
• Preferred 3 years of Oncology, specialty healthcare sales experience.
• Proven and consistent track record of meeting/exceeding sales objectives, preferably in specialty markets.
• Experienced managing and executing within large community accounts including strategic planning and problem solving.
• Previous sales experience in cell therapy/bone marrow transplant is a plus.
• Previous product launch experience in a highly competitive environment.
• Exceptional interpersonal, communication (written and presentation) skills.
• Possess superior selling skills honed in highly competitive markets.
• Proven expertise in building relationships and influencing.
• Aptitude for rapid learning and retention of technical and scientific product related information.
• Must set high goals and standard of performance and be self-motivated and able to work with a general level of autonomy.
• Demonstrated team work/collaboration.
• Demonstrated ability to read situations quickly, anticipate and adjust for problems and roadblocks.
• Valid driver’s license.
• Agility in multi-tasking.
• Able to travel up to 50-60% of the time.
• Proven track record of attaining organizational objectives.
• Exceptional organizational and time management skills.
• Ability to perform administrative responsibilities accurately and on time.
• Proficiency in Microsoft Office (Word, Excel, Outlook, PowerPoint).

#Li-JK1

#Li-Remote

Business Value Consulting (BVC) is a critical, client-facing role where the consultant will work closely with the MongoDB Sales team, playing a key role in driving the business forward. In a pre-sales perspective, BVCs engage with clients to capture and communicate the potential business value that our solutions provide. For post-Sales, BVCs validate the value, identify optimization opportunities and identify new growth opportunities. You will work across all industries, evaluating the business benefits and financial value to companies primarily in our Enterprise market.

*This role will be focus on North America, with flexibility for the candidates. Significant remote work allows us to support multiple Sales regions across the region. 

Responsibilities

• Support the sales organization, to impact both tactical and strategic opportunity success of our field sales force
• Develop Business Value Consulting collateral for internal and external use: when new MongoDB products are released, and when a gap or need of the practice is identified
• Serve as a mentor to sellers who may be unfamiliar with this role, and further improve the value selling capabilities of the rest
• Engage with customers using a value-based selling approach to build a compelling narrative that covers the current state, the desired future state, the value in closing the gap, and a delivery plan to ensure their success
• Use business, technical, and financial analyses to understand the baseline and future state capabilities of the customer
• Create and present the business case and the forecasted business impact the customer can achieve using MongoDB solutions
• Translate technical concepts and recommendations into business benefits for management and executives
• Travel is required but varies throughout the year

Requirements

• B.A. / B.S. from an accredited college; preference for Business Management, Economics, Finance or related degree
• 5+ years of proven experience as a Business/Technology Strategy Consultant with some Business Case experience
• 1-3+ years of experience working for a vendor in business value consulting role.
• Enterprise business and financial modeling experience, familiarity with key financial metrics: ROI, TCO, NPV, IRR
• Polished presentation and interpersonal skills
• Inquisitive personality to facilitate interview sessions with client roles, both business and technical stakeholders
• Experience addressing executive and senior level stakeholders
• Strong technical understanding of enterprise infrastructure, technology stack, software development methodologies (SDLC, Agile, DevOps), RDBMS and/or NoSQL software

An Ideal Candidate

• Audible-ready, ability to adapt to customer situations 
• Enjoys working in a fast-paced sales environment
• Experience working for a software vendor

About MongoDB

MongoDB is built for change, empowering our customers and our people to innovate at the speed of the market. We have redefined the database for the AI era, enabling innovators to create, transform, and disrupt industries with software. MongoDB’s unified database platform, the most widely available, globally distributed database on the market, helps organizations modernize legacy workloads, embrace innovation, and unleash AI. Our cloud-native platform, MongoDB Atlas, is the only globally distributed, multi-cloud database and is available across AWS, Google Cloud, and Microsoft Azure.

With offices worldwide and over 60,000 customers, including 75% of the Fortune 100 and AI-native startups, relying on MongoDB for their most important applications, we’re powering the next era of software.

Our compass at MongoDB is our Leadership Commitment, guiding how and why we make decisions, show up for each other, and win. It’s what makes us MongoDB. 

To drive the personal growth and business impact of our employees, we’re committed to developing a supportive and enriching culture for everyone. From employee affinity groups, to fertility assistance and a generous parental leave policy, we value our employees’ wellbeing and want to support them along every step of their professional and personal journeys. Learn more about what it’s like to work at MongoDB, and help us make an impact on the world!

MongoDB is committed to providing any necessary accommodations for individuals with disabilities within our application and interview process. To request an accommodation due to a disability, please inform your recruiter.

MongoDB, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type and makes all hiring decisions without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Req ID: 1273414990

Come and join an amazing team – we have had a long-standing presence in the Valley and its commitment to service excellence. We are adding another skilled and dependable Comfort Advisor to join our team.

Does this describe you?

• Enthusiastic
• Sales-focused
• Passionate for customer service
• Goal-oriented
• Adaptable

If the answer is YES, then join our team today ~

Key Responsibilities: 

• Conduct In-Home Consultations: Meet with homeowners to evaluate their HVAC needs, perform assessments, and discuss potential solutions.
• Present HVAC Solutions: Provide detailed explanations of our HVAC products and services, helping customers make informed decisions.
• Prepare Estimates: Develop accurate and competitive pricing estimates based on customer requirements and company guidelines.
• Close Sales: Utilize effective sales techniques to convert consultations into sales, meeting or exceeding sales targets.
• Follow-Up: Maintain customer communication to ensure satisfaction, address concerns, and provide ongoing support.
• Leverage Leads: Work with company-provided leads and self-generated prospects to maximize sales opportunities.
• Attend Training: Participate in ongoing training sessions to stay updated on product knowledge, sales strategies, and industry trends.
• Documentation: Maintain accurate records of sales activities, customer interactions, and installation schedules.

Benefits to Becoming a Comfort Advisor in the HVAC field:

• UNCAPPED earning potential
• Company car and gas card
• Full benefits including Medical, Dental, Vision and 401k
• Paid vacation and holidays
• Real opportunities for career growth

Qualifications:

• At least 1 year of successful sales and/or customer service experience. Consultative sales experience is a plus!
• Strong interest in HVAC systems and sales.
• Excellent communication skills. Ability to understand and explain technical information in a clear and concise manner.
• A positive, coachable, and driven attitude.
• Willingness to work flexible hours, including evenings and weekends.
• A current and valid driver's license in the state where you will work.

What We Offer:

• Competitive base salary with opportunities for unlimited commission as you progress.
• Comprehensive training program to help you succeed.
• Company-provided phone and other essential tools for successful sales presentations.
• Health insurance: Comprehensive medical, dental, and vision coverage.
• Retirement plan: 401(k) with company match.
• Paid time off: Generous vacation, holidays, and sick leave.
• Training and development: Ongoing opportunities for professional growth and advancement.
• Company culture: A supportive, inclusive, and dynamic work environment focusing on teamwork and employee satisfaction.

Work Environment:

Work in field environments across residential job sites, climbing ladders and navigating uneven surfaces. Regularly works in confined spaces and moves materials up to 50 pounds. Operates hand and power tools and vehicles. Must be able to see, hear, and exchange accurate information with customers and team members. Regular exposure to outdoor weather, noise, and dust. Reasonable accommodation may be made to perform essential functions.

Apply today!

#PRO

Smartsheet is seeking change agents to join our Commercial Sales Team as an Account Executive. You will be responsible for increasing software sales and driving expansion across a territory of accounts. You will be motivated, passionate, and opportunistic. You will be a proactive and curious member of the commercial sales team, identifying growth opportunities for clients before they identify a need or gap for themselves.

This remote role is part of the Commercial Sales team based in the US and reports a Manager, Commercial Sales.

You Will:

• Build and manage a sales pipeline to meet or exceed software and services sales quotas within your book of business
• Execute a solution-based sales process encompassing multiple groups within our commercial mature accounts equivalent to (500-4,999 employee size)
• Develop new business opportunities within existing customers by analyzing and proactively targeting high-value needs across multiple departments and lines of business
• Leverage existing relationships to expand Smartsheet's footprint and drive revenue or growth during renewals
• Expand Smartsheet brand awareness at the c-suite, operational and team level
• Facilitate and manage partnerships with Sales Engineers, Solutions Consultants and Customer Success teams to support full sales cycle and close business
• Create and maintain Joint Engagement Plans for strategic solution deals
• Maintain accurate and up-to-date records in Salesforce leveraging MEDDICC qualification guidelines to accurately forecast
• Utilize existing sales enablement tools to successfully implement a territory plan. Identifying top accounts through in-depth account research using internal tools as well as external customer-related resources Smartsheet footprint can add value to the client's business

You Have:

• 5+ years full sales cycle management with a history of proven performance in the SaaS space
• 3+ years of experience managing customer relationships and maintaining relationships in a B2B environment
• A thorough understanding of a SaaS evaluation process and have the ability to execute on each stage in the sales cycle
• 3+ years of experience working with multiple functional departments and roles to manage customer life cycle from initial engagement through implementation to renewal
• The ability to research accounts to uncover opportunities for up-sell within existing plans, and multi-thread opportunities across the organization
• Experience using CRM and power BI software (Salesforce and Tableau) to track daily activities, key metrics and gain territory insights
• Passion for working with new technologies and technical concepts
• Bachelor's degree or the equivalent combination of other post-secondary education

About the Role

Verkada is excited to announce our Account Executive Development Program, “Verkademy”! As an SDR, you’ll be a part of the fastest growing company in Silicon Valley/SF with a short promotion path into a closing role! Ideal candidates should be passionate, high energy and a self-starter with the ability to adapt in a fast-paced sales organization.

About Verkademy

What You'll Do

What You'll Do

US Employee Benefits

Verkada is committed to fostering a workplace environment that prioritizes the holistic health and wellbeing of our employees and their families by offering comprehensive wellness perks, benefits, and resources. Our benefits and perks programs include, but are not limited to:

• Healthcare programs that can be tailored to meet the personal health and financial well-being needs - Premiums are 100% covered for the employee under at least one plan and 80% for family premiums under all plans
• Nationwide medical, vision and dental coverage
• Health Saving Account (HSA) with annual employer contributions and Flexible Spending Account (FSA) with tax saving options
• Expanded mental health support
• Paid parental leave policy & fertility benefits
• Time off to relax and recharge through our paid holidays, firmwide extended holidays, flexible PTO and personal sick time
• Professional development stipend
• Fertility Stipend 
• Wellness/fitness benefits
• Healthy lunches provided daily
• Commuter benefits

Additional Information

What You'll Do

• Source and close new business to consistently meet or exceed quarterly sales quotas
• Build an intimate understanding of Verkada products and their place in the industry
• Manage the full sales cycle: Prospect for new customers, host online demos, create proposals, and close deals
• Maintain accurate pipeline management with expert-level forecasting 
• Aggressively exceed goals consisting of outbound phone calls, emails, online demos, and trials every quarter
• Act as a trusted advisor and subject matter expert to customers and channel partners
• Work closely with Channel Partners & Technical Support to ensure smooth launches and fuel future product growth
• Provide market/client feedback to Verkada’s product/engineering team
• This role will report into a Regional Sales Manager. 

What You Bring

• At least 2+ years of sales experience in a quota-carrying capacity 
• Highly effective communication skills, with ability to build rapport, nurture relationships, and strong presentation skills
• Thrive in a dynamic, competitive,  and fast-paced startup environment
• Bachelors degree preferred but not required 
• Experience in Salesforce is a plus 
• Tenacity, drive to learn, and self-motivated

What is GustoPro?

GustoPro is a cloud-based platform built specifically for accounting firms. It empowers firms to streamline payroll, people operations, and advisory services for their clients, all within a single, integrated platform. GustoPro features client dashboards, automated workflows, robust reporting, and seamless integrations with other accounting software — enabling firms to elevate their client service and accelerate practice growth. Learn more about GustoPro

About The Role

As a Partner Account Executive for GustoPro, you will play a critical role in expanding Gusto's footprint within the accounting market by recruiting new accounting firm partners, enabling them to succeed on the platform, and driving them to a healthy, self-sufficient state before transitioning them to an Account Manager.

Working directly with our Head of Sales and Head of GustoPro Sales, you will shape our new partner sales motion while owning the full arc of partner activation — from first conversation to a successful handoff. The benchmark that tells us activation is working: 10 net new clients added and the firm's 30-day enablement plan complete.

You'll engage with C-level executives and senior payroll specialists at accounting firms, with a focus on large regional and national players. You'll act as a consultant, understanding their unique needs and demonstrating how GustoPro can boost efficiency and help them realize more value for their clients while delivering upside for the firm.

The Partner Onboarding Agreement — a 30-day enablement contract signed at close — is your operating document once a firm is in. It defines milestones, role responsibilities across the firm, and the incentive structure that keeps both sides accountable through activation.

We're looking for a true "builder" — someone who's excited to wear multiple hats, design systems and processes, and run experiments. Comfort with a dynamic environment and the ability to pivot when needed is essential.

Here's what you'll do day-to-day

• Evangelize the GustoPro solution to prospective accounting firms to grow our market share and meet and exceed monthly/quarterly sales targets.
• Collaborate closely with Sales Leaders to build out and refine our new partner sales process, with a focus on accelerating sales cycles (target 60–90 days) and maximizing close rates.
• Conduct compelling and persuasive product demos that showcase the value of GustoPro using data and insights, tailored to resonate with accounting firm executives.
• Negotiate and execute the Partner Onboarding Agreement, aligning on a 30-day enablement plan and client pipeline targets from day one.
• Serve as the primary Gusto contact during the 30-day enablement period — keeping the Champion certification track, Practice Member Academy completion, and Practice Lead go-to-market readiness all on schedule.
• Hold the firm's Strategic Lead accountable to Champion designation and kickoff commitments in Week 1; track certification milestones and coordinate with the partner success team to unlock incentives on time.
• Support Practice Leads in running positioning and discovery workshops and building a migration candidate pipeline across their book of business.
• Drive the partner to 10 net new client adds within 90 days of signing — the activation benchmark — by leading regular status calls, removing blockers, and coordinating migration scheduling across practice areas.
• Coordinate co-marketing activation (co-branded materials, joint email campaigns) once the 10-client milestone unlocks co-op marketing funds, and ensure cross-sell products (HI, 401k, WC, R&D TC) are introduced as adoption deepens.
• Prepare a structured handoff brief for the receiving Account Manager — including certified contacts, migration status, QBR baseline, revenue and usage snapshot, and flagged growth opportunities — and facilitate a warm introduction.
• Navigate and update internal and external stakeholders, including C-suite executives at Gusto, partners, and cross-functional teams throughout the activation window.
• Leverage AI tools and technologies to enhance sales workflows, streamline partner communications, and derive actionable insights from data to drive more effective prospecting, pipeline management, and partner engagement.
• Travel as needed to partner offices for onsite meetings, as well as to industry events and conferences to represent Gusto and strengthen partner relationships.

Here's what we're looking for

• 6+ years total work experience in sales, account management, or customer success, with a strong focus on enterprise clients.
• 3+ years of experience selling B2B SaaS products or managing partner relationships, ideally to accounting firms or related businesses.
• A consistent track record of exceeding sales quotas and building long-term client relationships, including negotiating complex six-figure contracts.
• Experience and comfort working quick sales cycles (60–90 days average).
• Deep understanding of the accounting firm landscape, including their business models, challenges, and technology needs — particularly the CAS/advisory and payroll practices.
• Strong ability to articulate contractual, technical, and financial value points to partners, internal senior leaders, and executive leaders.
• Equally comfortable in a closing motion and a post-close enablement and coordination role — you see getting a firm to 10 clients as part of the sale, not separate from it.
• Strong analytical and problem-solving abilities — you're a strategic thinker who can identify risk and opportunity across a portfolio.
• Ability to quickly learn our product so you are credible with prospects and partners alike.
• Comfort and proficiency with AI-powered tools and technologies, with a willingness to adopt and integrate AI into daily sales and partner management workflows to improve efficiency and outcomes.
• Experience with CRM and sales software (e.g., Salesforce, ZoomInfo, Tableau).

Compensation

Our target on-target earnings (OTE) compensation for this role is $125,000/yr to $150,000/yr in Denver, Las Vegas, Chicago, Atlanta & most remote locations, $155,000/yr to $182,000/yr for San Francisco & New York and $120,000 to $180,000 CAD for Toronto. This OTE is structured with a target 70% base pay and 30% commission pay with an uncapped commission structure. Final offer amounts and the exact base/commission split are determined by multiple factors including candidate location, experience, and expertise and may vary from the amounts listed above.

IT Infrastructure Engineer

Reports to: IT Infrastructure Engineering Senior Manager

FLSA Status: Full time

The Company

Meriton is a national investment holding company with a portfolio of companies in the commercial HVAC industry.  Founded in 2019, we believe merit has everything to do with standards and that nothing is beyond or beneath us.  We base those standards around a set of values that we hold tightly to, ensuring we are building the right thing, at the right time, with the right people.  We know that business is earned – never given – and that’s why we’re serious about what we do.  Working together, we’ll co-create lasting growth by defining big visions and hammering down little details.  Our resources streamline business processes and provide access to a network of teams with extensive industry experience.

The Opportunity

We are seeking a highly skilled and motivated IT Infrastructure Engineer to oversee the company's IT infrastructure, ensuring its stability and efficiency while engineering effective solutions.  This role combines hands‑on execution with engaging external technology partners, as needed, to help implement and embed our IT standards within a portfolio company.  The IT Infrastructure Engineer is also responsible for supporting gap assessments by identifying where a portfolio company does not meet a given standard and helping to address and close those gaps.  Additional responsibilities include building projects such as implementing audio visual solutions for conference rooms and other workspaces, meeting building security requirements including access control and camera systems, addressing low‑voltage needs, and installing network equipment, printers, and other technology equipment as required.  They possess excellent interpersonal and communication skills, both oral and written, and can articulate ideas to both technical and non-technical audiences. 

Responsibilities

• Engineer and maintain IT systems and infrastructure.
• Create and maintain IT infrastructure roadmaps.
• Research and evaluate new infrastructure technologies and services, performing PoCs and pilots where appropriate.
• Collaborate with DevOps, Service Delivery, and Cyber Security teams to design infrastructure that meets performance, reliability, and security requirements.
• Deliver internal training or knowledge sharing sessions on infrastructure tools and processes.
• Provide infrastructure impact assessments for proposed changes and new applications.
• Provide technical input on RFPs and vendor selection related to infrastructure services and solutions.
• Maintain awareness of emerging infrastructure trends and recommend adoption where beneficial.
• Participate in governance forums or CABs as needed to represent infrastructure interests and risks.
• Act as a subject matter expert for infrastructure topics to IT leadership and business stakeholders, advising on feasibility and risk.
• Assess, plan, and execute the transition of network infrastructure to align with company standards. This includes hardware, software, and network configuration.
• Work closely with internal and external stakeholders, including IT teams, vendors, and new company representatives, to ensure successful project execution.
• Identify and mitigate potential risks and issues related to the onboarding and transition process.
• Create and maintain comprehensive documentation for all projects, including project plans, network diagrams, system documentation, architecture diagrams, transition procedures, and standard operating procedures.
• Perform Layer 2 and Layer 3 network troubleshooting and optimization to ensure seamless communication across devices and applications.
• Coordinate with ISPs to address connectivity issues and oversee circuit upgrades or installations.
• Train end users in the use of equipment and software.
• Perform system administration for various enterprise tools and platforms.

Qualifications

• Minimum 5 years of experience in an IT services support role.
• Associate’s degree preferred.
• In-depth knowledge of network infrastructure, including routers, switches, firewalls, and wireless networks.
• Strong PowerShell experience preferred.
• Strong Office 365 administration experience preferred.
• Strong Azure and Windows Server experience.
• Strong knowledge of TCP/IP - LAN, WAN, wLAN and vLAN technologies.
• Strong knowledge of MS Active Directory infrastructure.
• Familiarity with IP Telephony and cell phone technology.
• iOS experience preferred.
• Excellent analytic and problem-solving skills.
• Capable of working independently with minimal supervision.

Additional Information

This position requires travel to Meriton locations and customer sites across the U.S.

This job description is not intended to be all-inclusive; employees may perform other related duties as negotiated to meet the ongoing needs of the organization.

Meriton is an Equal Opportunity Employer. 

IT Specialist II, IT Service Delivery

Reports to: Senior Manager, IT Service Delivery

Compensation: $75K/yr with Bonus Potential

FLSA Status: Full time

The Company

Meriton is a national investment holding company with a portfolio of six operating companies in the commercial HVAC industry. Founded in 2019, Meriton is the parent holding company to successful commercial HVAC businesses in the nation. All Meriton businesses offer innovative commercial systems with flexibility of equipment and solutions to best match each application. The Meriton businesses work with industry professionals and end users from the conceptual stage of projects to provide energy-efficient, value-added solutions to their complex problems. Our sales professionals offer technical expertise and application experience in the design, construction, commissioning, and operation of building mechanical systems.

The overall mission is simple: we want to create value and make a difference every day in our journey to be the best HVAC sales and service organizations in North America. Meriton believes we can succeed in that mission by being the BEST provider for our clients, the BEST partner for manufacturers, the BEST company for our employees, and the BEST investment for our current and future shareholders.

The Opportunity

The IT Specialist II ensures proper computer, software, and network operation so that end users can accomplish appropriate business tasks for all business units. This position assists customers by taking service desk calls on a shift basis and provides support, training, and access management as needed. They are also responsible for the build, deployment, effective maintenance, and tracking of all IT equipment. The IT Specialist II assists in the development of strategies and plans to create technology solutions that are in alignment with business operations. They possess excellent interpersonal and communication skills, both oral and written; able to articulate ideas to both technical and non-technical audiences.

Responsibilities

• New user equipment and account setup, including deployment and license management.
• Train end users in the use of equipment and software
• Actively diagnose and respond to support tickets, incoming calls, emails, and walk-up requests.  Track and monitor the problem to ensure a timely resolution and follow-up.
• Provide both in-person support and support for remote workers.
• Support Apple products such as MacBook, iPad, & iPhone
• Support Microsoft products such as Windows, Office, Office365, and other cloud-based applications and support various vendor applications as needed.
• Support Apple hardware and software to diagnose and resolve issues with desktops, laptops, portable Macintosh systems, and mobile devices.
• Configure and support iPhone and iPad devices.
• Assist staff by providing audio/video conference support for presentations and meetings.
• Provide direct support of cyber security practices maintaining anti-malware, threat management, vulnerability management and anti-phishing technologies.
• Interact with vendors to facilitate repairs of hardware, i.e., printers and laptops.
• Manage inventory of hardware and software assets
• Support development and implementation of new computer projects and new hardware installations as well as software rollouts.
• Perform system administration for various enterprise tools and platforms.
• Perform hardware and software system configuration, maintenance, and upgrades.
• Manage projects of moderate scope, such as: design and implementation, system migrations, and MDM deployments.
• Evaluate products and IT processes and then recommend changes.
• Document IT processes, workflows, and produce system documentation as needed.
• Occasional travel to branch office locations may be required.

Education/Experience

• Minimum 2 years of experience in an IT services support role
• Associate degree preferred
• MacOS experience required
• iOS experience preferred
• InTune experience preferred
• Microsoft (MCP) Certification and/or ITIL (fundamentals level) preferred
• Familiarity with PowerShell required
• Office 365 administration preferred
• Azure and Windows Server experience preferred
• MSP experience preferred
• Knowledge of TCP/IP - LAN, WAN, wLAN and vLAN technologies
• Knowledge of MS Active Directory infrastructure
• Familiarity with IP Telephony and cell phone technology
• Excellent analytic and problem-solving skills
• Capable of working independently with minimal supervision

Key Competencies

Language Skills 
Read and comprehend simple instructions, short correspondence, and memos. Write correspondence. Present information effectively in one-on-one and small group situations to customers, clients, and other organization employees.

Operating Skills
Discern between and prioritize tasks to determine the best way to accomplish goals.  Organize tasks to get results in a timely manner and often against strict deadlines.  Sort out processes and simplify them to maximize workflow.

Behavior Skills
Manage people and situations when conflicts arise.  Seize opportunities with the drive to complete goals.

Reasoning Ability 
Apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.  Handle problems involving several concrete variables in standardized situations. Possess the mental stamina for problem solving and prioritizing multiple tasks.

Personal and Interpersonal Skills
Establish and grow relationships with customers through effective verbal and written communication.  Have a strong dedication to the needs of the customers, manufacturers, and peers.  Have patience and listen actively to all business partners.  Solve problems and skillfully negotiates with a minimum of noise, while managing stress.  Demonstrate integrity and trust through appropriate directness and truthfulness.  Understand personal strengths and weaknesses, seeks feedback, and improves upon shortcomings.

Other Skills/Abilities

Environmental Requirements

Will be required to work in an office environment and occasionally in the field.

Physical Demands
While performing the duties of this job, hands are regularly needed to operate computer keyboard, telephone, and other general equipment. Frequent standing, walking, and sitting is necessary. Occasional climbing, balancing, stooping, kneeling, crouching, or crawling is also necessary. Must be able to regularly lift and/or move up to 25 pounds and frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.

Why Meriton?

• Medical Insurance, Dental Insurance, Vision Insurance
• 100% company match on 401(k) contributions, up to 6% of pay.
• Tuition Reimbursement
• Company-paid Disability insurance (short-term and long-term) 
• Company-paid group life insurance
• Paid Time Off & Holidays 
• Volunteer Hours
• Employee-paid supplemental insurance options
• Employee Assistance Program (EAP)
• FSA, HSA and commuter benefits options
• Paid parental leave
• Career growth and learning
• …and so much more!

This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization.

Additional Information

Meriton is an Equal Opportunity Employer. This job description is not intended to be all-inclusive; employees may perform other related duties as negotiated to meet the ongoing needs of the organization.

Reports to: Turnkey Operations Manager

FLSA Status: Exempt

The Opportunity

As the Field Project Superintendent, this individual will be responsible for directing and coordinating the activities of designated projects, under the Project Manager’s direction, to ensure that the goals or objectives of the project are accomplished within the prescribed timeframe and funding parameters.  Must be detail and customer service oriented and have excellent organizational skills. Position requires a high-energy level, team-oriented, profit-driven, and customer-driven individual who can maintain a sense of urgency and communicate professionally and effectively with the sales teams, customers and manufacturers to ensure timely completion of assigned projects while maintaining customer satisfaction. Must be able to work well with others in a fast-paced & high-volume environment.

Responsibilities

• Provides daily on-site work direction to subcontractors, technicians, designers, and administration, as necessary.
• Under the direction of the Project Manager, manages and executes turnkey projects and controls installations in all areas of responsibility from start to successful completion including compliance with plans and specifications, safety, within scope and within budget of the contract, on-time, materials procurement, billing and collection.

• With the Project Manager, understands the plans and specifications for assigned projects.
• Alerts Project Manager of potential RFI (Request for Information) based on drawing and specification review and site conditions.
• Coordinates the required resources to ensure tasks are done accurately, on time, and within the scope of the contract.
  • Communicates the Project Manager for any issues, barriers, or concerns.
• Evaluates the contractual scope of work.
  • Actively communicated opportunities for additional work to the Project Manager.
  • Communicates both technical and business-related issues with the customers.

• Review labor, material cost plans and specifications for work performance.

• Reviews equipment selections and submittals to be ordered, ensuring all meet contract requirements.
• Coordinates equipment/material deliveries, responsible for equipment inspections upon delivery. Report any damage immediately.
• Schedules equipment and materials to be procured for the projects assigned.
• Coordinates all subcontractor work from outside vendors and suppliers, mechanical, controls and electrical subcontractors including scope.
• Reviews all subcontractor equipment and or material submittals ensuring all meets contract requirements.
• Represents Texas Air Systems as one of the primary on-site leaders for execution of assigned projects.

• Communicate with owners, architects, MEP consultants and general, mechanical, and electrical contractors, and owners during all phases of the project.

• Manages risk and establishes project recovery plans, when required.
• Resolves disputes with minimal need for escalation.
• Ensures project document controls/deliverables follow contract requirements and standards.
• Ensures control technicians complete the loading, device verification, and commissioning of all system controllers.
  • Drive controls pre-commissioning process and participates in final commissioning with the commissioning agent.
  • Validates complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation.
  • Requests and reviews project as-build and commissioning documentation.
  • Assist installers with interpretations of electrical and controls drawings, assist in controls wiring termination process as required.
• Utilizes project management software to punch assigned projects and coordinate subcontractors to complete required punch list items.
• Participate in GC and owner punch walks for assigned projects.
• Develops and maintains viable long-term relationships with contractors, customers, consultants, engineers, and subcontractors.
  • Attends job progress meetings as required.
• Administers warranty process.
  • Evaluate all warranty requests, coordinate any necessary resources to resolve warranty claim.
• Serve as a resource for customer/owner through continuing training and assists in systems troubleshooting after project closeout.
• Ensures all job-site personnel and subcontractors adhere to all safety standards including internal safety programs and OSHA requirements.
• May oversee multiple projects on an ongoing basis and available to walk job sites as needed.
• Protect and mitigate liability.
• Support and participate in company safety training & programs.

Competencies

• Demonstrated verbal and written communication skills.
  • Must have the ability to communicate technical material to a non-technical audience.
• Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write correspondence and effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. 
• Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.   Mental stamina for problem solving and prioritizing multiple tasks. 

Education/Experience

• Minimum 5+ years of experience in the Commercial/Industrial HVAC, controls installation, construction environment
• Experience with large mechanical projects, HVAC equipment, preferably with large central plants (chillers, boilers, etc.), and controls
• Experience in dealing with a large and diverse number of simultaneous challenges, requiring knowledge of many different disciplines and systems preferred.
• The ability to pass and maintain background checks for access into primary schools, universities, etc.
• OSHA 10/30 certification
• CPR &First Aid Certification
• Preferred: Skills in in MS Office (Excel, Word, PowerPoint),
• Preferred: Knowledge and proficient in project management software (PlanGrid, BIM360, Procore)
• Preferred: Bi-Lingual (Spanish)

Work Environment

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essentials functions.  This position will be required to work in an office environment and frequently in the field. 

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essentials functions of this job.  Reasonable accommodation may be made to enable the individuals with disabilities to perform the essentials functions.  While performing the duties of this job, the employee is regularly required to use hands to operate a computer keyboard and telephone, reach with hands and arms. The employee frequently is required to stand, walk, and sit. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.

About the Role:

We are building AI-powered, agentic workflows to transform how service operations scale, resolve customer needs, and maintain quality in high-stakes environments. At Gusto, that means designing systems that can earn the trust of small business owners — where a wrong answer or a missed escalation has real consequences.

As an AI Solutions Architect, you will own the end-to-end design and performance of these workflows in production — where models, tools, data, and human judgment come together to deliver outcomes. This is not a traditional architecture role. You will design, prototype, deploy, and continuously improve AI-driven systems that directly impact customer experience and operational efficiency. You will also play a key role in shaping the evolution of our AI platform by identifying capability gaps, prototyping solutions, and informing the primitives required to scale agentic systems effectively.

You will report into the Service Transformation org and work at the intersection of AI governance, service quality, and operational transformation — operating as the connective tissue between Engineering, CX, Legal, and Compliance as Gus, Gusto's AI assistant, scales.

About the Team:

The mission of our Service Transformation (CXT) team is to quickly evolve and scale how Gusto delivers outstanding service experiences and leverages AI to do so. Our team designs the systems, governance frameworks, and feedback loops that allow Gusto's service model to improve continuously, operate reliably, and earn the trust of the customers and employees who depend on it.

Here’s what you’ll do day-to-day:

• Architect, prototype, and own end-to-end agentic service workflow frameworks, from scoping through production deployment and iteration — including solve and assist targets, HITL protocols, override logic, and downstream quality safeguards
• Analyze SOPs, operational metrics and interaction data to identify and prioritize high-impact automation opportunities based on volume, risk, and customer impact
• Design and implement multi-agent orchestration patterns across tools, data sources, and decision steps within a single end-to-end workflow
• Apply and influence AI platform capabilities in partnership with CoreX (Gusto's AI Platform team) — including orchestration, retrieval, and evaluation — helping define what needs to be built to support production workflows at scale
• Identify platform gaps, prototype workflow-level solutions, and partner with engineering to shape the primitives required for reliable, scalable AI systems
• Serve as the primary CX voice in Legal, Security, Compliance, and CoreX forums — translating CX quality stakes and workflow risk into terms each audience acts on, and ensuring governance requirements are embedded in design, not retrofitted after launch
• Strengthen evaluation frameworks and feedback loops to ensure quality, compliance, and continuous improvement; contribute to Gusto's human evaluation programs and AI governance practices through deep partnership with our internal CX Labs team
• Partner with Data teams to define and track workflow performance — including solve and assist rate, AHT, rework rate, and customer effort score — clearly distinguishing between model-level, workflow-level, and operational drivers
• Build ROI models to quantify workflow impact across efficiency, quality, and cost before and after deployment
• Represent workflow performance and risk to senior stakeholders with appropriate precision and brevity; communicate in a way that drives action, not overwhelm
• Lead through ambiguity and rapid change: the function is still being defined, and you will help define it

Here’s what we're looking for:

• 8+ years in operations, product, or AI roles — with at least 2 years designing and deploying AI-assisted or agentic workflows
• Strong fluency with LLM systems, including prompt design, evaluation, and production behavior at scale
• Hands-on experience with agentic tooling, orchestration frameworks, or MCP-style integrations — conceptual familiarity is not sufficient at this level
• Experience designing human-in-the-loop (HITL) systems with clear escalation logic, override controls, and compliance-aware checkpoints
• Working knowledge of multi-agent systems and tool coordination
• Strong operational judgment: able to define and diagnose workflow metrics 
• Proven track record influencing cross-functional stakeholders — including Product, Engineering, Legal, Security, and Compliance — in writing, in design reviews, and in high-stakes forums
• Familiarity with Responsible AI practices, governance, and risk management in production environments
• Proven ability to operate in high ambiguity, create clarity, and drive alignment across technical and non-technical audiences
• Strong systems thinking with a bias toward execution and measurable outcomes
• Deep empathy for small business customers and the employees who serve them

Our cash compensation amount for this role is $133,470/yr to $173,511/yr in Denver & most major metro locations, and $157,145/yr to $204,289/yr for San Francisco & New York. Final offer amounts are determined by multiple factors including candidate location, experience and expertise and may vary from the amounts listed above.

About the Role:

Gusto is searching for a builder. Not a manager of an existing PEO sales team — a founder-minded sales leader who will design the motion, write the playbook, hire the team, and carry a personal book of business in the early months. This is a 0→1 opportunity to establish Gusto's PEO sales org from the ground up, and we're looking for someone who is energized by that challenge.

You will drive new PEO revenue by selling Gusto's co-employment solution to both prospects and our existing base of 400,000+ customers — Gusto's single biggest competitive advantage over legacy PEOs. The pace is fast, the market opportunity is real, and we're looking for someone who will bring experience, creativity, and a genuine passion for building to the table every single day. You align with our company values and have a knack for building for the long haul. If you're excited to roll up your sleeves, lead by example, and architect something from scratch, let's talk.

About the Team:

You will be the founding leader of Gusto's PEO sales function. In the first 6–12 months, you'll operate as a true player-coach — personally closing deals while simultaneously building the team, tooling, and infrastructure around you. You'll define the ideal customer profile, build out the sales stages and pipeline architecture in Salesforce, and establish the channel strategy (including broker and accountant referral partnerships) that will drive scalable new business over time.

This team will serve as Subject Matter Experts on PEO, guiding prospects through complex buying decisions and partnering closely with HR, benefits, and payroll counterparts to deliver a seamless customer experience. Your biggest unfair advantage: Gusto's existing install base. Like the best scaled PEOs, a meaningful share of your pipeline will come from converting existing payroll customers — and you'll be the one to design and build that on-ramp.

Here’s what you’ll do day-to-day:

• Sell and build simultaneously. For the first 6–12 months, carry a personal book of business while building the team and infrastructure around you. This is a player-coach role that requires someone comfortable operating at both levels.
• Design the sales motion from scratch. Define sales stages, lead routing, funnel metrics, and pipeline architecture in Salesforce. This org doesn't have a pre-built RevOps foundation — you'll build it.
• Own the full talent lifecycle. Partner closely with Recruiting to define hiring profiles, run interviews, and select top PEO sales talent. Onboard new hires for fast ramp and continuously assess team capacity to stay ahead of headcount needs.
• Build and leverage the channel ecosystem. Develop a point of view on broker, GA, and accountant referral channels. Even if you don't own these relationships day one, you'll be expected to shape the strategy and lay the groundwork for a scalable partner channel.
• Convert the install base. Develop the playbook for converting Gusto's existing 500K+ payroll customers to PEO. Understand the unique motion, objections, and value proposition for in-base selling vs. cold-start prospecting.
• Operate with selling season fluency. Understand and plan around PEO's concentrated selling window (Sept–Dec, with ~50–60% of new business landing Jan 1). Build team capacity, pipeline targets, and go-to-market rhythms accordingly.
• Collaborate cross-functionally with Sales, Marketing, and Product leadership to identify market opportunities, drive pipeline, and help shape PEO product strategy.
• Use data to drive decisions — from advisor skill development to team-level initiatives. Track, measure, and report on sales effectiveness; adjust programs as needed.
• Lead with AI fluency. As a people leader at Gusto, you're expected to actively model and drive AI adoption across your team — not just as a user, but as a champion. This means leveraging AI tools to surface pipeline insights, accelerate coaching, improve forecast accuracy, and identify at-risk deals earlier. You'll help your team integrate AI into daily workflows (outreach, call prep, follow-up), experiment with new tooling, and share learnings across the broader sales org. We expect our leaders to stay ahead of the curve and bring a point of view on how AI can make the team meaningfully better.
• Build a culture of excellence. Cultivate each individual's skill set and guide career pathing as they grow within the organization. Ensure the team maintains deep knowledge of PEO compliance, co-employment regulations, and applicable state and federal employment law requirements.

Here’s what we're looking for:

• PEO Expertise: 5+ years of experience in PEO sales, with direct experience standing up a PEO sales org or building a sales team 0→1 in a high-growth environment. We're prioritizing builder profiles over tenure in a mature org.
• Player-Coach Experience: Proven ability to carry personal quota while simultaneously building team, process, and infrastructure. This is not a pure management role in the early stages.
• Selling Season Fluency: Direct experience operating within PEO's Jan 1 selling cycle — Sept–Dec pipeline build, renewal dynamics, and capacity planning. This is a key screen for PEO-specific operating experience vs. generic HCM.
• Install Base Conversion: Experience developing or executing strategies to convert an existing customer base to a higher-tier or adjacent product. Familiarity with in-base PEO conversion motions is a strong plus.
• Channel Strategy: Understanding of broker, GA, and accountant referral channels in the PEO or benefits space. Ability to develop a POV and lay groundwork for scalable partner-sourced pipeline.
• RevOps & Pipeline Architecture: Experience building or significantly contributing to Salesforce pipeline design — sales stages, lead routing, funnel reporting — from an early-stage starting point.
• Management Experience: 5+ years of people management in a sales organization, including direct involvement in recruiting and hiring.
• Results-Oriented: Consistent track record of establishing and exceeding measurable goals.
• Sales Acumen: Strong working knowledge of inbound and outbound sales methodologies in SMB SaaS or HCM/PEO environments.
• Collaboration: Ability to work effectively across Sales, HR, Benefits, and Product teams; excellent interpersonal skills.
• AI Leadership: Demonstrated ability to evaluate, adopt, and champion AI and automation tools in a sales environment. Comfortable going beyond personal usage — setting expectations, building habits, and holding the team accountable to AI-enabled ways of working.
• Technical Proficiency: Salesforce.com (SFDC) experience required, including pipeline and funnel design; familiarity with HCM platforms and benefits administration tools preferred.

Our target on-target earnings (OTE) compensation for this role is $270,000/yr to $280,000/yr in Denver & most remote locations, and $295,000/yr to $318,000/yr for San Francisco, & New York. This OTE is structured with a target 60% base pay and 40% commission pay with an uncapped commission structure. Final offer amounts and the exact base/commission split are determined by multiple factors including candidate location, experience, and expertise and may vary from the amounts listed above.

About You and The Role  

As a Construction Foreman in the Phoenix region, you will be responsible for rolling out our systems in the metro and paving the way imagining how the UAV world meets the built environment - not just for Zipline but for our customers and the industry as a whole. You will manage the entire build process from initial site design handover & constructibility, assist the PM team with scoping & buyout, construction, commissioning, and closeout. You will work closely with the rest of the construction team and contractor base to build strong relationships with key stakeholders and build scalable, repeatable construction processes to expand our network.

You will also be working with the Engineering and Operations teams to tackle all the technical challenges we face head-on to get our customer’s sites operational as quickly as possible. You will have to be technically savvy, and be able to develop relationships with customers, suppliers and contractors. 

What You'll Do  

• Oversee all on-site construction activities for multiple drone launch tower projects.
• Coordinate with project managers, engineers, subcontractors, vendors, and local authorities to ensure smooth project execution.
• Assist in design of site to constructability and cost control, permitting, inspections, and final commissioning of drone tower facilities.
• Schedule and supervise daily tasks for construction crews.
• Monitor progress and adjust schedules as needed to meet project deadlines.
• Ensure compliance with safety standards, building codes, and zoning regulations.
• Maintain quality control throughout all phases of construction. This is both for the typical construction site prep whether performed by Zipline or our partners, as well as, and foremost our Zipline hardware.
• Conduct regular site inspections and ensure all documentation is up to date.
• Manage procurement and delivery of construction materials and equipment via coordination with our warehouse team.
• Report regularly to senior construction leadership with project updates, timelines, and issue resolution.
• Travel frequently 75%+ to be onsite for our projects in in the Sunbelt region with a near term focus on Texas (Dallas, Houston) and Arizona (Phoenix), travel to our head offices in California and other domestic states, and possible international travel to support expansion projects.

What You'll Bring 

• 5+ years of experience as a Construction Superintendent or similar role in commercial or industrial construction.
• Experience with vertical infrastructure (e.g., towers, silos, telecommunications structures) strongly preferred.
• Proven ability to manage multiple job sites simultaneously.
• Proficient with Bluebeam and able to create mark-ups to share digitally with remote workers, or equivalent programs.
• Proficiency in construction management software and tools.
• Strong understanding of construction methods, scheduling, and project management.
• OSHA 30 certification or willingness to obtain.
• Ability to read and interpret blueprints, structural drawings, and technical documents.
• Excellent communication and leadership skills.
• Valid driver’s license and ability to travel 75%+ for extended periods within the Sunbelt region. 
• Must be eligible to work in the US.

Preferred Qualifications

• Prior experience with aviation, aerospace, or drone-related construction projects.
• Bilingual (English/Spanish) preferred.

What Else You Need to Know   

We are seeking an R&D Metrology Engineer to join our dynamic materials development labs. The ideal candidate will be self-motivated, hands-on, and a resourceful problem solver with a strong understanding of materials characterization equipment and methods. In this role, you will work closely with ALD and Epi process engineers to develop and optimize next-generation materials for advanced node semiconductor processing.

This position requires working the early morning shift (1^st shift), including weekend coverage, to ensure optimal utilization and uptime of metrology equipment in a fast-paced R&D environment

Key Responsibilities

• Apply advanced metrology techniques to support the company’s materials and process development roadmap.
• Troubleshoot metrology equipment issues and collaborate with vendors to resolve hardware/software malfunctions.
• Partner with process engineers to select appropriate characterization methods and assist in data interpretation.
• Acquire and analyze metrology data; summarize findings for engineering and management review.
• Maintain tool uptime by partnering with vendors and supporting lab operations during off-hours.
• Train engineers on metrology tools, develop SOPs, and create recovery procedures for tool-down scenarios.
• Monitor uptime data; contribute to tool efficiency and continuous improvement initiatives.
• Develop metrology recipes and applications to streamline operations and solve technical challenges.
• Provide on-call support and ensure smooth lab operations during night and weekend shifts.
• Maintain LEAN 6S standards and contribute to a clean, organized lab environment.
• Stay current with industry trends by attending conferences, seminars, and workshops.

Required Qualifications

• Ph.D. in Materials Science and Engineering (preferred), or other engineering fields, Chemistry, Physics, Engineering, or related field.
• Hands-on experience with TEM, STEM, EDS, EELS, SEM, and FIB.
• Familiarity with techniques such as XRR, XRD, XRF, TXRF, FTIR, SPV, four-point probe, Hall effect, and defect inspection tools.
• Solid understanding of semiconductor processing and device fabrication.
• Proficiency in MS Office and JMP; strong data analysis and reporting skills.
• Excellent communication skills and ability to work independently and collaboratively.
• Availability for night and weekend support as needed.

Preferred Qualifications

• Experience developing metrology recipes and turnkey solutions.
• Background in lab operations and equipment maintenance.
• Programming experience, particularly in scripting or automation for data acquisition, data analysis, and tool control.

Position Overview 

Align offers a wide variety of services centered around the data center white space.  We are a technology solution provider specialized in data center white space design and fit outs. Our services include designing layouts, overhead support systems (to support cable pathways and electrical systems), power striping and redundancy planning for distribution from PDUs to cabinet receptacles, conduit pathways, and low voltage structured cable infrastructure. 

We are seeking an experienced Safety Manager to provide dedicated safety leadership for our data center construction operations. This role ensures that all project activities are planned and executed safely, aligning with our safety management system, regulatory requirements, and client expectations. The ideal candidate brings a strong background in construction safety, especially in high-risk, MEP-heavy, or critical facility environments, and is passionate about preventing serious incidents and driving continuous improvement.   

• This is a full-time position offering a base salary commensurate with experience, comprehensive benefits, paid time off, paid training, and performance-based bonuses.  
• The location for this position is flexible, but we prefer candidates located near these offices: Plano TX, Chicago IL, and Phoenix AZ.   
• Candidates should be open to travel outside the region as needed. 

Responsibilities

• Partner with Data Center Design, Procure and Build leadership, project teams, subcontractors, and clients to support safe work planning and execution  
• Maintain a strong daily presence in the field through safety walks, observations, and coaching conversations  
• Lead and support pre-task planning (JHAs/JSAs), ensuring high-risk work is reviewed and controlled before execution  
• Conduct site inspections, audits, and verification of control measures; ensure timely corrective actions  
• Track and drive closure of safety observations, corrective actions, and near-miss follow-ups  
• Lead or support incident and near-miss investigations, including root cause analysis and corrective actions  
• Develop and deliver safety training and toolbox talks tailored to site-specific risks  
• Monitor and influence high-risk work activities (electrical, LOTO, working at heights, confined space, lifting operations)  
• Track and report safety metrics, trends, and leading indicators to project leadership 
• Partner with clients on safety expectations, coordination, and sitewide initiatives 

Required Qualifications

• Partner with Data Center Design, Procure and Build leadership, project teams, subcontractors, and clients to support safe work planning and execution  
• Maintain a strong daily presence in the field through safety walks, observations, and coaching conversations  
• Lead and support pre-task planning (JHAs/JSAs), ensuring high-risk work is reviewed and controlled before execution  
• Conduct site inspections, audits, and verification of control measures; ensure timely corrective actions  
• Track and drive closure of safety observations, corrective actions, and near-miss follow-ups  
• Lead or support incident and near-miss investigations, including root cause analysis and corrective actions  
• Develop and deliver safety training and toolbox talks tailored to site-specific risks  
• Monitor and influence high-risk work activities (electrical, LOTO, working at heights, confined space, lifting operations)  
• Track and report safety metrics, trends, and leading indicators to project leadership 
• Partner with clients on safety expectations, coordination, and sitewide initiatives 

Preferred Qualifications

• Experience managing safety programs at site or organizational level  
• Bilingual (English + Spanish or Russian) 

To support a fair, consistent, and high-quality hiring experience, some interviews may be recorded. These recordings help our team focus fully on the conversation at hand, rather than note-taking, and allow us to better evaluate and improve our recruitment process. Recordings are used solely for internal purposes such as training, quality assurance, and process improvement. Candidates will be informed in advance and asked to provide consent before any recording takes place.

About the Role

The Revenue Operations team at Gusto is a full-stack team responsible for data, analytics, and operational excellence in pursuit of scaling our revenue growth. The Go-To-Market Analytics team is one functional area, responsible for defining and owning the metrics for scaling our Sales teams. 

Gusto is looking for a Revenue Analytics Engineer to build and maintain foundational data infrastructure that is crucial to growing and scaling our Sales efforts. In this role, you will partner with our GTM analysts to scope and deliver data products for an audience ranging from company and revenue leadership to operational and frontline sales. In doing so, you will own significant portions of our sales data from end-to-end, focusing on the transformation, design, and visualization workflows. In addition, you will establish best practices for systems design and workflows to maximize usefulness of AI at scale. 

This role will report to the Head of Go-To-Market analytics, and partner closely with Data Science, Data Platform, and Business Technology teams. 

Here’s what you’ll do day-to-day:

• Establish relationships with internal stakeholders to determine business needs, scoping and delivering solutions through data products
• Design, build, and maintain data pipelines and dashboards to automate “keep the lights on” work out of manually-managed processes
• Build a data foundation by incorporating business logic into raw data tables, laying the groundwork to enable value-add insights
• Create a dynamic reporting environment based on stakeholder needs
• Identify data discrepancies and set best practices for data logic to create a clean and well-documented environment
• Collaborate with broader data organization as steward to the definition and process management of core Gusto metrics

Here’s what we're looking for:

• Education or work experience in Engineering or Computer Science, or a related technical field 
• 7+ years of experience in an analytics engineering, business intelligence, or technical data analytics role
• Experience with SQL and ETL optimization techniques, especially within cloud-based data warehouses like Redshift, Snowflake, etc.
• Command-line experience and familiarity with version control collaboration tools (git)
• Experience with data pipeline management technologies with dependency checking, such as Airflow, as well as schema design and data modeling tools (dbt)
• Experience with data visualization technologies, e.g., Tableau, Looker, Sigma, Mode, Hex
• Experience with Python and data ingestion tools
• Ability to problem-solve open-ended problems and project manage dependencies and timelines to optimal outcomes
• Ability to demonstrate tools, business intuition, and attention to detail for data validation and QA 

Our cash compensation amount for this role is targeted at $138,000-156,000 in Denver & most remote locations, and $168,000-189,000 in New York & San Francisco Bay Area. Stock equity is additional. Final offer amounts are determined by multiple factors including candidate experience and expertise and may vary from the amounts listed above.

PURPOSE OF POSITION:

The purpose of the Field Service Manager role is to lead and manage the day-to-day field service operations for the C&I/SPD or Enterprise division within the associated U.S. region. This position is responsible for directing field execution activities, supporting successful commissioning and related service work on customer sites. The Field Service Manager oversees Field Service Leads, directs field execution efforts, and ensures all service assignments are completed safely, efficiently, and in accordance with company standards and customer expectations. As a key operational leader, this position balances resource planning, technical support, employee development and oversight, customer collaboration, and continuous process improvement to support both field team and customer.

SUPERVISORY RESPONSIBILITIES:

This position directly supervises Field Service Leads and may also provide indirect oversight to field technicians and engineers through the lead structure. The Field Service Manager carries out management responsibilities in accordance with company policies and applicable laws, including interviewing, hiring, onboarding, mentoring, training, coaching, performance management, and completion of performance evaluations for assigned leads. This role also works in close partnership with Field Service leadership, administrators, operations, commercial teams, and other cross-functional internal departments to support effective field execution, workforce development, and the achievement of broader business objectives.

ESSENTIAL FUNCTIONS:

• Manage field service operations for the assigned division within the U.S. region, with accountability for execution quality, daily project staffing coordination, customer support, and job closeout.

• Oversee scheduling and deployment of field service teams to supporting commissioning and related project work at customer sites.

• Ensure successful completion, documentation, and closeout of commissioning and field service assignments in accordance with customer requirements, internal standards, and project timelines.

• Coordinate with Field Service leadership and associated internal team members to address staffing gaps, shifting priorities, escalation needs, and operational challenges that could impact successful execution.

• Work with clients and internal teams to address urgent or emergency service needs; coordinate dispatch of field resources when necessary and appropriate.

• Collaborate with Field Service Leads and administrative support staff to ensure service paperwork, reports, timesheets, expense items, and other required documentation are submitted timely and jobs are closed out efficiently and accurately.

• Provide product and field service expertise to support technicians, engineers, internal staff, customers, and sales teams with technical questions, issue resolution, and service-related guidance.

• Identify project risks, resource constraints, operational inefficiencies, and execution issues that may adversely affect service success, and escalate concerns appropriately.

• Monitor workforce utilization and report to management when resources are insufficient, not effectively utilized, or when customer requests exceed reasonable operational capacity.

• Incorporate feedback from internal departments, field personnel, customers, and leadership to improve service delivery, communication, scheduling, reporting, and cross-functional coordination.

• Promote and reinforce culture of accountability, responsiveness, professionalism, quality, and safety across the field service team.

• Ensure compliance with company policies, procedures, quality standard, performance expectations, and safety requirements.

• Travel to IEM manufacturing locations, field service offices, and customer sites, as required, to support employees, business needs, and leadership coordination.

• Perform other related duties as assigned by supervisor or management to support the ongoing evolving needs of the business.

• Perform other duties as assigned by management.

COMPETENCIES:

• Leadership & Team Development: Provides clear direction, coaching, mentorship, and accountability to Field Service Leads and supports development of the broader field team.

• Operational Execution: Effectively manages scheduling, service delivery, resource coordination, and job completion in a fast-paced field service environment.

• Customer Focus: Responds professionally to customer needs, service issues, and escalations while balancing business priorities and operational realities.

• Technical Support Orientation: Demonstrates sufficient technical knowledge of commissioning, maintenance, troubleshooting, and power systems service work to support the field team and internal stakeholders.

• Communication: Communicates clearly and professionally with field personnel, leadership, customers, sales teams, and cross-functional partners.

• Problem Solving & Judgment: Identifies risks, evaluates options, and makes sound operational decisions in a timely manner.

• Organization & Priority Management: Manages multiple projects, staffing needs, service requests, deadlines, and competing priorities with strong attention to detail.

• Collaboration: Works effectively across functions and levels of the organization to improve execution and service outcomes.

• Continuous Improvement: Seeks opportunities to improve workflows, closeout practices, reporting processes, and department effectiveness.

• Compliance & Safety Mindset: Reinforces adherence to company policies, customer requirements, and safety expectations in all field service activities.

EDUCATION AND EXPERIENCE:

• Bachelor’s degree in Business, Engineering, Operations, or a related field preferred; equivalent combination of education and relevant field service experience may be considered.

• Minimum 3–5 years of field service, commissioning, maintenance, troubleshooting, or related electrical power systems experience.

• Prior leadership, supervisory, or team lead experience in a field service, construction, industrial, electrical, or mission critical environment preferred.

• Experience supporting service operations involving large electrical systems, commissioning activities, preventive maintenance, and customer site execution strongly preferred.

• Demonstrated experience in employee oversight, scheduling, workforce coordination, and performance management.

• Strong working knowledge of service operations, field documentation requirements, customer support expectations, and safety practices.

• Proficiency with Microsoft Office and other business systems used for scheduling, reporting, and operational tracking.

• Ability to read, interpret, and communicate technical and operational information effectively.

PHYSICAL/MENTAL/ENVIRONMENTAL:

Physical Demands:

Activities: Sitting – 80% Walking/Standing – 20% Lifting: Must be able to bend, lift and carry up to 50lbs. 

Vision: Requires long periods of close work on computer screens, technical documents, drawings, and detailed service information.

Travel: Must be able to travel up to 30% to IEM regional field offices and vendor sites.

Mental Demands: Ability to interpret technical and operational information, analyze issues, prioritize multiple tasks, respond to urgent service needs, support team decision-making, and exercise sound judgment in a fast-paced environment.

Environment: Work is performed primarily in climate-controlled office environments, with regular interaction with field operations and occasional exposure to customer job sites, manufacturing areas, warehouses, and non-climate-controlled environments. When onsite, exposure to heat, cold, dust, noise, vibration, and other industrial conditions may occur.

JOB SUMMARY:

The purpose of the Field Service Support Specialist is to provide technical, operational, and administrative support to IEM’s Field Service team. This role is responsible for supporting field operations through emergency phone support, automation and networking assistance, troubleshooting coordination, technical documentation, reporting, and inventory tracking. The position serves as a key link between Field Service, manufacturing plants, engineering, production, procurement, and other internal teams to help resolve technical and operational issues and support the successful execution of field service activities. This role also assists with scheduling, project coordination, reporting, training materials, and other support activities that contribute to the overall efficiency of the Field Service organization.

SUPERVISORY RESPONSIBILITIES:

• This position has no direct supervisory responsibilities.

ESSENTIAL FUNCTIONS:

• Serve as the first point of contact for 24/7 emergency phone support.

• Provide automation and networking support, guidance, and training to Field Service Engineers and Technicians.

• Support Field Service Technicians with commissioning, troubleshooting, and issue resolution activities.

• Act as a liaison between Field Service and manufacturing plants to help address technical issues.

• Investigate critical problems in depth and collaborate with subject matter experts as needed to support resolution.

• Assist with the development and maintenance of technical documentation, including Methods of Procedure, Sequences of Operation, and training materials.

• Support the Field Service management team with data collection, reporting, and analysis.

• Partner with production, service, and engineering teams to identify and help resolve product or service deficiencies.

• Coordinate with IEM factory personnel to support efficient execution of Field Service operations.

• Assist in monitoring project progress, identifying potential risks or issues, and recommending corrective actions when needed.

• Gather and track data related to Field Service activities, performance metrics, and customer feedback.

• Coordinate with the procurement team to support timely replenishment of Field Service supplies and materials.

• Maintain accurate inventory records, including transaction tracking, documentation, and periodic system audits.

• Track the shipping and receiving of Field Service parts and test equipment delivered to the JAX1 facility.

• Assist in the development and maintenance of an asset tracking system for Field Service tools and equipment.

• Perform other duties as assigned by management.

COMPETENCIES: 

• Technical Troubleshooting: Applies strong technical knowledge to support troubleshooting and resolution of issues related to switchgear, PLC controls, generator controls, networking equipment, and field service operations.

• Problem Solving: Identifies issues, evaluates root causes, and works through practical solutions in a timely and effective manner.

• Communication: Communicates clearly and professionally with Field Service leadership, technicians, plant personnel, and cross-functional teams, both verbally and in writing.

• Customer Focus: Demonstrates professionalism, responsiveness, and a strong service mindset when supporting internal and external customers.

• Collaboration: Works effectively with Field Service, Engineering, Production, Service, Procurement, and other internal teams to support issue resolution and operational goals.

• Prioritization & Time Management: Manages multiple assignments, shifting priorities, and urgent support needs while maintaining quality and responsiveness.

• Attention to Detail: Ensures accuracy and completeness in technical documentation, reports, inventory records, and operational tracking.

• Documentation & Reporting: Organizes, maintains, and supports the development of technical documents, procedures, reports, and training materials.

• Operational Coordination: Supports the planning, scheduling, and coordination of field service activities to help ensure efficient execution and follow-through.

• Data & Reporting Acumen: Gathers, tracks, and reviews field service data, performance metrics, and related information to support reporting and decision-making.

• Adaptability: Adjusts effectively to changing business demands, technical challenges, and operational priorities in a fast-paced environment.

• Professional Judgment: Exercises sound judgment when responding to technical concerns, escalating critical issues, and supporting business needs.

QUALIFICATIONS: 

• Bachelor’s degree in Engineering or a related field, or an equivalent combination of education and relevant experience.

• Strong troubleshooting and problem-solving skills related to switchgear, PLC controls, generator controls, and networking equipment.

• Ability to manage multiple priorities effectively in a fast-paced environment.

• Excellent communication skills with a strong customer-facing presence.

PHYSICAL/MENTAL/ENVIRONMENTAL:

• Physical Demands:

• Activities: Sitting – 75% Walking/Standing – 25%

• Lifting: Must be able to lift and carry up to 25lbs.

• Vision: Requires extended periods of close visual focus and computer screen work

• Travel: Occasional travel (up to 25%) may be required to IEM manufacturing facilities, and regional field offices.

• Mental Demands: Ability to interpret, analyze, and research information, while managing multiple priorities and meeting time-sensitive deadlines.

• Environment: Work is performed primarily in an office setting, with occasional exposure to manufacturing or field environments as needed.

PURPOSE OF POSITION:

The purpose of the Field Service Lead role is to manage, supervise, and optimize the performance of a team of field service technicians and engineers as they perform start-up/commissioning, troubleshooting, and maintenance of IEM products at customer sites. This is a working-lead role, combining hands-on field responsibilities with direct oversight of a team of approximately 8 technicians supporting 2–6 active customer sites.

SUPERVISORY RESPONSIBILITIES:

• Provides daily guidance, work direction, coaching, mentorship, and technical support to field service technicians.

ESSENTIAL FUNCTIONS:

• Lead and coordinate start-up and commissioning activities for electrical equipment across multiple customer sites, ensuring on time completion and minimizing open issues.

• Provide daily supervision, mentorship, and training to field service technicians.

• Serve as the technical lead, offering product expertise and advanced troubleshooting guidance to technicians and engineers.

• Travel to IEM manufacturing or field service facilities as required to participate in or lead training activities, factory witness tests, and shop testing.

• Identify project areas of risk that may adversely affect the success of subordinate technicians and report these risks to management for action.

• Works on job sites to complete project start-up/commissioning, resolving punch list items found at the job site. Works with IEM Project Managers to update punch lists and ensure jobs are closed out and paperwork deliverables are met.

• Coordinate with commercial and administration teams for requests outside of the startup/commissioning scope.

• Ensure technicians have required tools, materials, and documentation to perform work effectively at each site.

• Report product or quality concerns to management and collaborate with production and engineering teams to address identified deficiencies.

• Work with the Division Manager, Field Service Manager, Field Service Support, and Site Operations Representative in scheduling additional field resources and/or teams to cover service needs.

• Perform other duties as assigned by management.

COMPETENCIES:

• Team Leadership & Coaching: Provides day-to-day direction, mentorship, and support to field service technicians, reinforcing accountability, development, and high-quality execution.

• Technical Expertise: Demonstrates strong working knowledge of electrical equipment start-up, commissioning, troubleshooting, and maintenance, and serves as a technical resource to the team.

• Planning & Coordination: Organizes field activities, manpower coverage, tools, materials, and documentation to support multiple active customer sites and meet service demands.

• Customer Focus: Builds and maintains positive customer relationships through professionalism, responsiveness, and effective communication during field activities.

• Problem-Solving & Decision-Making: Identifies field issues, assesses risk, and takes timely, practical action to support project completion and minimize disruption.

• Safety & Compliance: Promotes and follows safe work practices, including LOTO and site-specific safety requirements, and reinforces compliance across the team.

• Communication & Collaboration: Communicates clearly with technicians, managers, project teams, and internal support functions to ensure alignment, issue resolution, and timely closeout of work.

• Organization & Execution: Manages multiple priorities, maintains attention to detail, and ensures field documentation, punch list updates, and follow-up actions are completed accurately and on time.

EDUCATION AND EXPERIENCE:

• Associate degree, vocational training, military experience, or equivalent experience in power distribution systems, including switchgear, UPS, generators, PDUs, or related equipment commissioning activities.

• Minimum of 2 years of field service experience, with an emphasis on start-up and commissioning of electrical equipment.

• Experience with switchgear, electrical distribution systems, and electrical control systems preferred.

• Familiarity with advanced communication protocols and networking concepts preferred.

• Prior supervisory or lead-level experience preferred.

• Understanding of lock-out/tag-out (LOTO) procedures involving multiple power sources required.

• Strong teamwork and communication skills required.

• Ability to work independently with minimal supervision required.

• Effective problem-solving skills required.

• Strong organizational skills and the ability to manage multiple priorities required.

PHYSICAL/MENTAL/ENVIRONMENTAL:

Physical Demands: Activities: Sitting – 20% Walking/Standing – 80% Lifting: Must be able to bend, lift, and carry equipment and materials up to 50lbs. Vision: Long periods of close work on technical equipment, drawings, and computer screens.

Travel: Occasional travel (up to 75%) may be required to IEM regional field offices and vendor sites.

Mental Demands: Ability to interpret technical information, analyze issues, prioritize multiple tasks, solve problems in the field, and make sound decisions in a fast-paced service environment. Environment: climate-controlled office and warehouse environments, with occasional exposure to customer job sites as needed.

About the Role:

We are seeking a highly motivated and licensed Property & Casualty (P&C) Insurance Broker to join our team as part of a critical pilot to launch a P&C broker model at Gusto. You will be essential in evolving Gusto's business insurance channel by acting as a licensed agent to quote and issue business insurance policies with our NEXT Insurance carrier partner. You will use your expertise to provide direct support and an improved experience for small business customers with complex insurance needs, helping to capture meaningfully higher revenue and accelerating the development of our AI Insurance Advisor.

About the Team:

This team is crucial to solving customer experience gaps and optimizing our offline insurance channels. You will be a SME who is part of the "human-in-the-loop" workflows required to train and optimize Gus as an AI insurance advisor. Our collective vision is to be an expert advisor that supports small businesses through every stage of growth, with this pilot being key to establishing our digital insurance agency and licensed agent integration.

Here’s what you’ll do day-to-day:

• Make outbound dials to prospective and existing small business clients to assess their complex P&C insurance needs and recommend suitable coverage options.
• Quote and issue Property & Casualty policies, primarily with the NEXT Insurance carrier, in our offline sales channel.
• Achieve required daily, weekly, and monthly sales activity expectations. 
• Provide human-in-the-loop support to optimize the AI Insurance Advisor, Gus, and assist customers with more complex needs.
• Maintain client relationships, manage policy renewals, and facilitate changes or endorsements to existing policies.
• Act as a trusted liaison between clients and carriers, including assisting clients with reports of losses and claims settlement when necessary.
• Actively work to cross-sell and up-sell additional P&C lines of coverage and strive to achieve monthly production goals for units and/or revenue.
• Maintain accurate and up-to-date client records and policy documentation within CRM systems (SFDC workflow).
• Use AI-powered workflows as a core part of how you sell: running assigned tools daily, surfacing friction and inefficiencies as you find them, and collaborating with your team to influence what gets built or improved next.
• Stay current on industry trends, products, regulations, and underwriting guidelines to provide accurate advice and ensure compliance.

Here’s what we're looking for:

• Experience in the field: Proven experience in insurance sales or brokerage, with coverage level knowledge of commercial P&C products (e.g., Workers' Compensation, BOP, Commercial Auto, E&O). [4+ years]
• Licensing: An active Property & Casualty insurance producer’s license
• Communication & Interpersonal Skills: Excellent verbal and written communication, active listening, and strong interpersonal skills to build rapport and explain complex concepts clearly.
• Sales & Negotiation: Strong sales and negotiation abilities with a proven ability to meet sales targets.
• Technical Proficiency: Working knowledge of carrier quoting systems, proficiency in insurance software, and familiarity with CRM systems like Salesforce (SFDC). 
• Comfortable using AI tools and automation to enhance productivity, decision-making, and problem-solving.
• Mindset: A demonstrated passion for delivering an incredible customer experience and genuine empathy for small business owners.
• Attributes: Highly self-motivated, goal-oriented, and an entrepreneurial ownership mentality to thrive in a fast-paced, high-energy environment.
• AI Fluency: Proven, day-to-day experience integrating AI into how you work - across writing, research, prep, and summarization as a core part of your workflow, with a track record of giving clear, useful feedback that helps improve your tools and processes.

Our cash compensation amount for this role is $109,390 to $134,000 OTE for Denver, Atlanta, Chicago & Las Vegas. $102,855 to $126,000 OTE for Phoenix. Final offer amounts are determined by multiple factors including candidate location, experience and expertise and may vary from the amounts listed above.

Seneca Federal Solutions is part of the Seneca Nation Group (SNG) portfolio of companies. SNG is Seneca Holdings’ federal government contracting business that meets mission-critical needs of federal civilian, defense, and intelligence community customers. Our portfolio comprises multiple subsidiaries that participate in the Small Business Administration 8(a) program. To learn more about SNG, visit the website and follow us on LinkedIn.

Our team of talented individuals is what makes us successful. To support our team, we provide a balanced mix of benefits and programs. Your total rewards package includes competitive pay, benefits, and perks, flexible work-life balance, professional development opportunities, and performance and recognition programs. We offer a comprehensive benefits package that includes medical, dental, vision, life, and disability, voluntary benefit programs (critical illness, hospital, and accident), health savings and flexible spending accounts, and retirement 401K plan. One of our fundamental principles is to offer competitive health and welfare benefits to our team members, providing coverage and care for you and your family. Full-time employees working at least 30 hours a week on a regular basis are eligible to participate in our benefits and paid leave programs.  We pride ourselves on our collaborative work environment and culture, which embraces our mission of providing financial and non-financial benefits back to the members of the Seneca Nation.

Seneca Federal Solutions is seeking a Junior Environmental Planner to provide on-site environmental planning and program support to the Bureau of Indian Affairs (BIA), Division of Environmental, Safety, and Cultural Resources Management (DESCRM), in Phoenix, Arizona. This is an entry- to early-career position designed to support senior and mid-level environmental professionals in the execution of National Environmental Policy Act (NEPA) and related environmental compliance activities across the BIA Western Region.

The position emphasizes office-based support, records management, coordination, and document preparation, with opportunities to gain hands-on experience in federal environmental planning under the guidance of experienced staff.

This position requires working on-site a minimum of four (4) days per week to meet government support and programmatic needs.

Key Responsibilities include, but are not limited to:

Environmental & NEPA Support

• Assist senior and mid-level environmental planners with the preparation, revision, and processing of NEPA documents, including:
• Categorical Exclusion (CatEx) documentation
• Environmental Assessments (EAs)
• Supporting technical memoranda and appendices
• Help compile existing conditions information and background research for environmental documents.
• Support coordination and tracking of NEPA actions through internal databases and tracking systems.
• Assist with quality control reviews to ensure consistency, completeness, and compliance with federal requirements.

Records & Program Support

• Perform environmental records management, including:
• Organizing, cataloging, and digitizing paper and electronic environmental files
• Maintaining document control and version tracking
• Support data calls, information requests, and reporting requirements.
• Assist with preparation of meeting agendas, notes, and summaries for internal and external coordination.

Coordination & Communication

• Support coordination with Federal, Tribal, state, and local partners as directed.
• Maintain contact lists, mailing lists, and project files.
• Assist with logistics for public involvement activities, meetings, and outreach efforts.
• Provide administrative and programmatic support to DESCRM staff as needed.

Field & Travel Support (Limited)

• Participate in occasional site visits or field observations when required, under supervision.
• Provide logistical and documentation support for field activities and reporting.
• Travel may be required on a limited basis.

Required Qualifications

• Bachelor’s degree in Environmental Studies, Environmental Science, Planning, Biology, Anthropology, Geography, Natural Resources, or a closely related field.
• 0–2 years of experience in environmental planning, environmental science, or a related field (internships and academic project experience may count).
• Basic understanding of NEPA and federal environmental compliance.
• Strong organizational, writing, and document management skills.
• Proficiency with Microsoft Office applications (Word, Excel, Outlook).
• Strong attention to detail and ability to follow established procedures.
• Effective written and verbal communication skills.

Preferred Qualifications

• Familiarity with federal environmental programs or work with federal agencies.
• Coursework or experience related to NEPA, ESA, CWA, or cultural resources compliance.
• Experience supporting records management, database tracking, or administrative program support.

Work Location & Schedule

• This position is primarily on-site at the BIA DESCRM office in Phoenix, Arizona.
• Minimum in-office requirement: four (4) days per week.
• Remote work, if available, is limited and based on government direction and workload—not employee preference.

Seneca Federal Solutions is part of the Seneca Nation Group (SNG) portfolio of companies. SNG is Seneca Holdings’ federal government contracting business that meets mission-critical needs of federal civilian, defense, and intelligence community customers. Our portfolio comprises multiple subsidiaries that participate in the Small Business Administration 8(a) program. To learn more about SNG, visit the website and follow us on LinkedIn.

Our team of talented individuals is what makes us successful. To support our team, we provide a balanced mix of benefits and programs. Your total rewards package includes competitive pay, benefits, and perks, flexible work-life balance, professional development opportunities, and performance and recognition programs. We offer a comprehensive benefits package that includes medical, dental, vision, life, and disability, voluntary benefit programs (critical illness, hospital, and accident), health savings and flexible spending accounts, and retirement 401K plan. One of our fundamental principles is to offer competitive health and welfare benefits to our team members, providing coverage and care for you and your family. Full-time employees working at least 30 hours a week on a regular basis are eligible to participate in our benefits and paid leave programs.  We pride ourselves on our collaborative work environment and culture, which embraces our mission of providing financial and non-financial benefits back to the members of the Seneca Nation.

Seneca Federal Solutions is seeking a Mid‑Level Environmental Planner to provide direct technical and regulatory support to the Bureau of Indian Affairs (BIA), Division of Environmental, Safety, and Cultural Resources Management (DESCRM), in Phoenix, Arizona. This position supports environmental planning and compliance activities under the National Environmental Policy Act (NEPA) and related federal statutes across the BIA Western Region.

The Mid‑Level Environmental Planner serves as a key contributor responsible for preparing, reviewing, and coordinating environmental documents, while working closely with senior staff, agency partners, and Tribal stakeholders. The role requires sound professional judgment, strong technical writing skills, and the ability to manage assigned tasks independently within established program frameworks.

This position requires a minimum of two (2) days per week working on-site at the BIA DESCRM office in Phoenix, Arizona. Additional in-office presence may be required based on project needs and government direction.

Key Responsibilities include, but are not limited to:

NEPA & Environmental Compliance

• Prepare, edit, and coordinate NEPA documentation, including:
• Categorical Exclusion (CatEx) documentation
• Environmental Assessments (EAs)
• Supporting technical reports and environmental analyses
• Conduct technical reviews of NEPA documents prepared by others to ensure adequacy, consistency, and compliance with federal requirements.
• Assist in processing NEPA actions through agency tracking systems and databases (e.g., NEPA Tracker).
• Apply knowledge of federal environmental regulations, including NEPA, ESA, CWA, CAA, and related laws, to assigned projects.

Technical Analysis & Review

• Prepare or review technical materials such as:
• Biological assessments and technical memoranda
• Environmental monitoring summaries (e.g., wetlands, endangered species)
• Environmental impact avoidance and mitigation documentation
• Participate in interdisciplinary project coordination involving transportation, utilities, renewable energy, and land management actions.
• Support quality assurance and document control processes.

Coordination & Stakeholder Support

• Coordinate with Federal, Tribal, state, and local agencies under the direction of senior staff.
• Support Tribal consultation and interagency coordination efforts.
• Assist with public involvement activities, including preparation of outreach materials, meeting summaries, and response tracking.
• Maintain project files, correspondence records, and distribution lists.

Programmatic & Office Support

• Provide program support to DESCRM staff, including responding to data calls, organizing records, and supporting project reporting requirements.
• Participate in monthly coordination and reporting activities, as required.
• Assist senior staff with workload tracking, schedules, and task prioritization.

Field & Travel Support

• Participate in site visits and field activities as required.
• Prepare trip summaries and support documentation following fieldwork.
• Occasional travel within or outside the Western Region may be required.

Required Qualifications

• Bachelor’s degree in Environmental Science, Environmental Studies, Planning, Biology, Anthropology, Natural Resources, or a closely related field.
• 3–5 years of professional experience in environmental planning, environmental compliance, or a related field.
• Demonstrated experience preparing or reviewing NEPA documents.
• Working knowledge of applicable federal environmental laws and regulations.
• Strong technical writing and editing skills.
• Excellent organizational, analytical, and communication skills.
• Proficiency with Microsoft Office and document management systems.

Preferred Qualifications

• Experience supporting federal agencies, Tribal governments, or federally funded projects.
• Familiarity with NEPA tracking databases and federal document workflows.
• Experience assisting with biological assessments, environmental monitoring, or regulatory consultations.
• Prior work in the Western United States or on Tribal lands.

Work Location & Schedule

• Hybrid position based in Phoenix, Arizona.
• Minimum in-office requirement: two (2) days per week at the BIA DESCRM office.
• Remaining workdays may be performed remotely, subject to project needs, government requirements, and supervisor approval.
• Additional in-office days may be required during high-priority tasking or surge support.

At Lyft, our purpose is to serve and connect. We aim to achieve this by cultivating a work environment where all team members belong and have the opportunity to thrive.

Flexdrive is a subsidiary of Lyft that works together with Lyft teams to realize our shared mission. 

Flexdrive, a subsidiary of Lyft provides vehicle access to Lyft drivers through a flexible car rental subscription program, is looking for a motivated and organized Operations Associate to join our Phoenix team full-time. Reporting into the Operations Lead, in this role, you will be providing quality in-person experiences by serving customers at our local Flexdrive facilities that offer the Express Drive Program end-to-end rental process and preparing them for the exciting road ahead. If you love working with people, have a passion for operations and the thought of helping Lyft drivers continue to build this incredible ride-sharing movement in [NAME OF MARKET] sounds exciting, we would love to meet you!  

Responsibilities:

• Assists customers with the car rental process, including but not limited to Express Drive customer support, customer Arrival/Check-In, assigning drivers to rental vehicles and processing rental returns
• Prepares Flexdrive rental vehicles for Lyft Drivers, which includes fueling and cleaning, installing telematics, license plates, conducting fleet vehicle inspections, and managing vehicle compliance documents
• Manages vehicle lot organization, vehicle transportation, and other daily rental operations
• Flags vehicle issues, program challenges, and bugs to the Operations Lead and internal/external partners
• Builds trust and works effectively with others to achieve results and team goals
• Upholds Flexdrive’s high standard of service while working with all drivers and be an ambassador for the Lyft brand
• Takes initiative and ownership to "make it happen" and seeks out opportunities to contribute to team success

Experience:

• 1+ year of experience in an in-person customer service role like retail, technical support or hospitality
• Familiarity with the Phoenix area
• Impeccable customer service and problem-solving skills
• Excellent, clear verbal and written communication skills
• What should come easy to you: patience, problem identifying and solving, de-escalating situations, teamwork, and self-governance 
• Team Player Mentality: We are all about THE TEAM, since we all know there is no “I” in TEAM
• Bonus points if you love ride-sharing so much that you're a Lyft driver too! 
• Proficiency in other languages is considered a plus!
• A valid unrestricted driver's license and satisfactory driving record and be insurable under Lyft's policy required

Benefits:

• Great medical, dental, and vision insurance options with additional programs available when enrolled
• Mental health benefits
• Family building benefits
• Child care and pet benefits
• 401(k) plan with company match to help save for your future
• In addition to 12 observed holidays, salaried team members have discretionary paid time off, hourly team members have 15 days paid time off
• 18 weeks of paid parental leave. Biological, adoptive, and foster parents are all eligible
• Subsidized commuter benefits
• Monthly Lyft credits and complimentary Lyft Pink membership

Note: For this role, candidates must reside in states registered for Flexdrive Services LLC.

This role is on-site at a Lyft Flexdrive hub or office location full time. #Onsite

The expected base pay range for this position in the Phoenix area is $16.67 - $20.77, not inclusive of potential equity offering, bonus or benefits. Salary ranges are dependent on a variety of factors, including qualifications, experience and geographic location. Your recruiter can share more information about the salary range specific to your working location and other factors during the hiring process.

Flexdrive is an Equal Opportunity Employer committed to an inclusive workplace that fosters belonging. All qualified applicants will receive consideration for employment without regards to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, age, genetic information, or any other basis prohibited by law. Flexdrive also strives for a healthy and safe workplace and strictly prohibits harassment of any kind. Flexdrive will also consider employment for qualified applicants with criminal histories consistent with applicable federal, state and local law.

Location

This role requires working from our downtown Toronto office 4 days/week (Mon, Tues, Thurs, Fri). Candidates must be based within a 50-mile commuting distance of the office.

About the Role

At Opendoor, AI isn’t a side project - it’s how we work. Across the company, teams default to AI to solve problems, ship faster, and remove friction from everything we do. You will help define the future of how we work by building AI powered workflows, automation, and experiences that drive leverage across Finance — spanning month-end close, SEC Reporting, FP&A, Technical Accounting, Tax, Procurement, Accounts Payable, and Payroll. This is high agency work in high ambiguity - turning messy problems into clean solutions, prototyping fast, and shipping.

You'll make systems design and tooling decisions that affect how our Finance operations scale – so we need people who think critically about what and why they build, the impact it will have on our team, and how to measure success. 

We're looking for AI-native builders who know how to automate complex operational workflows. The accounting and finance domain knowledge can be learned — what matters most is that you're wired to build, that you default to AI in how you approach problems, and that you can map messy business processes into clean, automated systems. 

Why Join Us

• Build AI automation for our Financial Operations from the ground up
• Work on cutting-edge systems directly impacting key Finance processes in a public company 
• Collaborate with talented engineers and finance team members
• Access to enterprise AI tools — Claude Code, Cursor, and LLM APIs. We invest heavily in AI infrastructure so you can build and experiment.

What You'll Do

This is a hands-on individual contributor role. You will design, build, and ship automations — not just evaluate tools or write strategy decks.

• Turn complex Accounting and Finance problems into clear system designs, experiments, and implementation plans
• Build and maintain AI-powered automation that improves operational efficiency, accuracy, and scale across Finance functions
• Automate workflows (journal entries, reconciliations, flux analysis) using SQL, Python, and agentic AI
• Maintain clean, auditable data throughout automated workflows, with dashboards and controls that support both operational and compliance needs
• Partner with the internal SOX team and external auditors to ensure automated processes meet compliance standards and are well-documented
• Build and scale AI literacy across the Finance team through runbooks, documentation, best practices, and hands-on training 

What You'll Bring

• At least 5+ years of work experience building automation, operational workflows, or data systems in any industry. 
• Familiarity with LLM deployment, context engineering and comfortable writing SQL or Python code
• Understanding of machine learning lifecycle concepts: training, evaluation, deployment, monitoring

Systems Thinking: You understand how data flows through operational systems. You can look at a business process, identify the inputs, outputs, dependencies, and failure modes, and design automation around it.

System Design: You take complex, messy problems and reduce them to simple, durable architecture. 

Communication: Articulate problems clearly to both technical and non-technical audiences. You write clean documentation, build dashboards that tell a story, and can walk a stakeholder through your design rationale.

AI Alchemy: You have high agency and a tinkering mindset. You default to experimenting, running variations with new tools and methods - LLMs, automation platforms, coding assistants until you can transmute data into high quality results. You're comfortable writing SQL code, working with APIs, and stitching tools together to ship solutions fast.

Impact Driven: You optimize for impact over novelty, choosing the right tools for the job and ensure performance, scalability and resiliency.

Bonus if you have:

• Experience in Accounting or Finance 
• Comfort working in regulated or compliance-sensitive environments

Tools and Technologies

You'll work across a range of tools and we expect this list to evolve. Ideal candidates will have experience with the following tech stack:

• AI coding assistants: Claude Code, Cursor, or similar 
• Workflow automation: Gumloop or similar platforms
• MCP integrations
• Agentic AI frameworks or building automation flows 
• Data / ERP platforms: Snowflake, NetSuite, Ramp or similar 

Note: Opendoor provides enterprise-level access to all AI tools listed above. Our engineers currently consume billions of AI tokens per month across the company and are not constrained by token limits or personal account restrictions.

Compensation

Our compensation plan consists of a base salary and Opendoor equity  in addition to a comprehensive package of benefits including paid time off, paid holidays, medical/dental/vision insurance, basic life insurance, and 401(k) to eligible employees.  All compensation parameters are based on experience.

 #LI-DM

#LI-Onsite

Job Summary

Role and Responsibilities

• Deliver an excellent customer experience in all interactions
• Resolve new and escalated service tickets, provide guidance for or personally resolve aging and complex issues
• Troubleshoot and resolve client emergencies with minimal oversight, escalating to senior engineering resources where necessary
• Serve as an escalation point to mentor and coach team members
• Assist clients with the design and implementation, installation, configuration and ongoing usability of desktop computers, mobile devices, peripheral equipment, telephony systems, servers, storage, networking and software
• Work with vendor representatives to resolve software and hardware issues
• Install and/or upgrade Microsoft Windows Server Operating Systems
• Perform advanced virus, malware and ransomware mediation
• Provide professional quality server room cable management
• Responsible for creating and maintaining high quality, detailed documentation 
• Resolve backup issues and perform restore testing
• Install, configure, support complex virtual environments with High Availability in VMWare ESXi and Hyper-V environments
• Work with clients to harden security posture through policy and advanced technologies according to Abacus standards and processes
• Communicate with clients as required:  Keeping them informed of incident progress, notifying them of impending changes or agreed upon outages
• Take part in after hours
• On Call rotation as needed – must have a minimum of 6 months experience at Abacus and have supervisor approval before joining rotation.
• Accountable for continued customer satisfaction and coordinates all activities with the client, assists with client training while representing Abacus in a professional manner
• Perform on-site technical and customer service support, to include:
  • Emergency/unscheduled repairs of clients’ on-site technical systems and equipment
  • Performs scheduled maintenance and repairs of clients’ technical systems and equipment
  • Network switch and server room cable management
  • Diagnoses, troubleshoots, repairs, and debugs complex technical and computer systems, and software
  • Follow standard procedures to isolate and fix problems in malfunctioning equipment or software.
  • Performs routine cleanup of client network closets including labeling, removal of unneeded equipment, and updating of documentation
• Demonstrate proficiency in reporting activities, maintaining local spare parts inventories, recording time and travel expense records and client log records
• Exhibit adaptability and is willing to alter shifts and job requirements to meet the needs of clients and Abacus
• Comply with all safety requirements, including but not limited to: completing all required training, following all guidance provided in Abacus policies, procedures, field guidelines, reporting requirements, and technical advisories.  Demonstrates a pro-active approach toward safety, health, and quality in compliance with all Company, governmental and customer requirements
• Lead teams on standard projects (i.e. system migrations, virtual server configurations, server and firewall installations, office setups and moves, VPN tunnel configurations)
• Participate in project planning, solution delivery, mentoring and teaching improved processes to team members
• Follow Abacus’s defined processes, policies, service delivery standards 
• All other duties assigned.

Qualifications and Education Requirements

• Associates degree in technology related field OR equivalent combination of education and work experience
• A minimum of 3+ years of experience in IT Support, working in Microsoft Environments
• Required certifications:  Network +, Server +, Windows Server 70-410, 98-365 or equivalent
• Complete other technical and professional development as outlined in development plan
• Understanding of Windows 2016/2012/2008 servers, Active Directory, SQL, Sharepoint, Exchange Servers, Backup Technologies, Internet/DNS/E-mail/Communication issues
• Knowledge of VMWare, Citrix, VPN and Terminal Services
• Knowledge of VoIP, voicemail, analog, and vendor specific hardware/software
• MSP specific experience strongly desired
• Excellent problem solving and client relationship skills
• Excellent verbal and written communication skills
• Ability to learn and retain new technology skills and troubleshooting processes, team player, maintain calm and present yourself professionally in high stress situations.

Job Summary

Role and Responsibilities

• Deliver an excellent customer experience in all interactions
• Resolve new and escalated service tickets, provide guidance for or personally resolve aging and complex issues
• Troubleshoot and resolve client emergencies with minimal oversight, escalating to senior engineering resources where necessary
• Serve as an escalation point to mentor and coach team members
• Assist clients with the design and implementation, installation, configuration and ongoing usability of desktop computers, mobile devices, peripheral equipment, telephony systems, servers, storage, networking and software
• Work with vendor representatives to resolve software and hardware issues
• Install and/or upgrade Microsoft Windows Server Operating Systems
• Perform advanced virus, malware and ransomware mediation
• Provide professional quality server room cable management
• Responsible for creating and maintaining high quality, detailed documentation 
• Resolve backup issues and perform restore testing
• Install, configure, support complex virtual environments with High Availability in VMWare ESXi and Hyper-V environments
• Work with clients to harden security posture through policy and advanced technologies according to Abacus standards and processes
• Communicate with clients as required:  Keeping them informed of incident progress, notifying them of impending changes or agreed upon outages
• Take part in after hours
• On Call rotation as needed – must have a minimum of 6 months experience at Abacus and have supervisor approval before joining rotation.
• Accountable for continued customer satisfaction and coordinates all activities with the client, assists with client training while representing Abacus in a professional manner
• Perform on-site technical and customer service support, to include:
  • Emergency/unscheduled repairs of clients’ on-site technical systems and equipment
  • Performs scheduled maintenance and repairs of clients’ technical systems and equipment
  • Network switch and server room cable management
  • Diagnoses, troubleshoots, repairs, and debugs complex technical and computer systems, and software
  • Follow standard procedures to isolate and fix problems in malfunctioning equipment or software.
  • Performs routine cleanup of client network closets including labeling, removal of unneeded equipment, and updating of documentation
• Demonstrate proficiency in reporting activities, maintaining local spare parts inventories, recording time and travel expense records and client log records
• Exhibit adaptability and is willing to alter shifts and job requirements to meet the needs of clients and Abacus
• Comply with all safety requirements, including but not limited to: completing all required training, following all guidance provided in Abacus policies, procedures, field guidelines, reporting requirements, and technical advisories.  Demonstrates a pro-active approach toward safety, health, and quality in compliance with all Company, governmental and customer requirements
• Lead teams on standard projects (i.e. system migrations, virtual server configurations, server and firewall installations, office setups and moves, VPN tunnel configurations)
• Participate in project planning, solution delivery, mentoring and teaching improved processes to team members
• Follow Abacus’s defined processes, policies, service delivery standards 
• All other duties assigned.

Qualifications and Education Requirements

• Associates degree in technology related field OR equivalent combination of education and work experience
• A minimum of 3+ years of experience in IT Support, working in Microsoft Environments
• Required certifications:  Network +, Server +, Windows Server 70-410, 98-365 or equivalent
• Complete other technical and professional development as outlined in development plan
• Understanding of Windows 2016/2012/2008 servers, Active Directory, SQL, Sharepoint, Exchange Servers, Backup Technologies, Internet/DNS/E-mail/Communication issues
• Knowledge of VMWare, Citrix, VPN and Terminal Services
• Knowledge of VoIP, voicemail, analog, and vendor specific hardware/software
• MSP specific experience strongly desired
• Excellent problem solving and client relationship skills
• Excellent verbal and written communication skills
• Ability to learn and retain new technology skills and troubleshooting processes, team player, maintain calm and present yourself professionally in high stress situations.

Job Summary

Role and Responsibilities

• Deliver an excellent customer experience in all interactions
• Resolve new and escalated service tickets, provide guidance for or personally resolve aging and complex issues
• Troubleshoot and resolve client emergencies with minimal oversight, escalating to senior engineering resources where necessary
• Serve as an escalation point to mentor and coach team members
• Assist clients with the design and implementation, installation, configuration and ongoing usability of desktop computers, mobile devices, peripheral equipment, telephony systems, servers, storage, networking and software
• Work with vendor representatives to resolve software and hardware issues
• Install and/or upgrade Microsoft Windows Server Operating Systems
• Perform advanced virus, malware and ransomware mediation
• Provide professional quality server room cable management
• Responsible for creating and maintaining high quality, detailed documentation 
• Resolve backup issues and perform restore testing
• Install, configure, support complex virtual environments with High Availability in VMWare ESXi and Hyper-V environments
• Work with clients to harden security posture through policy and advanced technologies according to Abacus standards and processes
• Communicate with clients as required:  Keeping them informed of incident progress, notifying them of impending changes or agreed upon outages
• Take part in after hours
• On Call rotation as needed – must have a minimum of 6 months experience at Abacus and have supervisor approval before joining rotation.
• Accountable for continued customer satisfaction and coordinates all activities with the client, assists with client training while representing Abacus in a professional manner
• Perform on-site technical and customer service support, to include:
  • Emergency/unscheduled repairs of clients’ on-site technical systems and equipment
  • Performs scheduled maintenance and repairs of clients’ technical systems and equipment
  • Network switch and server room cable management
  • Diagnoses, troubleshoots, repairs, and debugs complex technical and computer systems, and software
  • Follow standard procedures to isolate and fix problems in malfunctioning equipment or software.
  • Performs routine cleanup of client network closets including labeling, removal of unneeded equipment, and updating of documentation
• Demonstrate proficiency in reporting activities, maintaining local spare parts inventories, recording time and travel expense records and client log records
• Exhibit adaptability and is willing to alter shifts and job requirements to meet the needs of clients and Abacus
• Comply with all safety requirements, including but not limited to: completing all required training, following all guidance provided in Abacus policies, procedures, field guidelines, reporting requirements, and technical advisories.  Demonstrates a pro-active approach toward safety, health, and quality in compliance with all Company, governmental and customer requirements
• Lead teams on standard projects (i.e. system migrations, virtual server configurations, server and firewall installations, office setups and moves, VPN tunnel configurations)
• Participate in project planning, solution delivery, mentoring and teaching improved processes to team members
• Follow Abacus’s defined processes, policies, service delivery standards 
• All other duties assigned.

Qualifications and Education Requirements

• Associates degree in technology related field OR equivalent combination of education and work experience
• A minimum of 3+ years of experience in IT Support, working in Microsoft Environments
• Required certifications:  Network +, Server +, Windows Server 70-410, 98-365 or equivalent
• Complete other technical and professional development as outlined in development plan
• Understanding of Windows 2016/2012/2008 servers, Active Directory, SQL, Sharepoint, Exchange Servers, Backup Technologies, Internet/DNS/E-mail/Communication issues
• Knowledge of VMWare, Citrix, VPN and Terminal Services
• Knowledge of VoIP, voicemail, analog, and vendor specific hardware/software
• MSP specific experience strongly desired
• Excellent problem solving and client relationship skills
• Excellent verbal and written communication skills
• Ability to learn and retain new technology skills and troubleshooting processes, team player, maintain calm and present yourself professionally in high stress situations.

Job Summary

Role and Responsibilities

• Deliver an excellent customer experience in all interactions
• Resolve new and escalated service tickets, provide guidance for or personally resolve aging and complex issues
• Troubleshoot and resolve client emergencies with minimal oversight, escalating to senior engineering resources where necessary
• Serve as an escalation point to mentor and coach team members
• Assist clients with the design and implementation, installation, configuration and ongoing usability of desktop computers, mobile devices, peripheral equipment, telephony systems, servers, storage, networking and software
• Work with vendor representatives to resolve software and hardware issues
• Install and/or upgrade Microsoft Windows Server Operating Systems
• Perform advanced virus, malware and ransomware mediation
• Provide professional quality server room cable management
• Responsible for creating and maintaining high quality, detailed documentation 
• Resolve backup issues and perform restore testing
• Install, configure, support complex virtual environments with High Availability in VMWare ESXi and Hyper-V environments
• Work with clients to harden security posture through policy and advanced technologies according to Abacus standards and processes
• Communicate with clients as required:  Keeping them informed of incident progress, notifying them of impending changes or agreed upon outages
• Take part in after hours
• On Call rotation as needed – must have a minimum of 6 months experience at Abacus and have supervisor approval before joining rotation.
• Accountable for continued customer satisfaction and coordinates all activities with the client, assists with client training while representing Abacus in a professional manner
• Perform on-site technical and customer service support, to include:
  • Emergency/unscheduled repairs of clients’ on-site technical systems and equipment
  • Performs scheduled maintenance and repairs of clients’ technical systems and equipment
  • Network switch and server room cable management
  • Diagnoses, troubleshoots, repairs, and debugs complex technical and computer systems, and software
  • Follow standard procedures to isolate and fix problems in malfunctioning equipment or software.
  • Performs routine cleanup of client network closets including labeling, removal of unneeded equipment, and updating of documentation
• Demonstrate proficiency in reporting activities, maintaining local spare parts inventories, recording time and travel expense records and client log records
• Exhibit adaptability and is willing to alter shifts and job requirements to meet the needs of clients and Abacus
• Comply with all safety requirements, including but not limited to: completing all required training, following all guidance provided in Abacus policies, procedures, field guidelines, reporting requirements, and technical advisories.  Demonstrates a pro-active approach toward safety, health, and quality in compliance with all Company, governmental and customer requirements
• Lead teams on standard projects (i.e. system migrations, virtual server configurations, server and firewall installations, office setups and moves, VPN tunnel configurations)
• Participate in project planning, solution delivery, mentoring and teaching improved processes to team members
• Follow Abacus’s defined processes, policies, service delivery standards 
• All other duties assigned.

Qualifications and Education Requirements

• Associates degree in technology related field OR equivalent combination of education and work experience
• A minimum of 3+ years of experience in IT Support, working in Microsoft Environments
• Required certifications:  Network +, Server +, Windows Server 70-410, 98-365 or equivalent
• Complete other technical and professional development as outlined in development plan
• Understanding of Windows 2016/2012/2008 servers, Active Directory, SQL, Sharepoint, Exchange Servers, Backup Technologies, Internet/DNS/E-mail/Communication issues
• Knowledge of VMWare, Citrix, VPN and Terminal Services
• Knowledge of VoIP, voicemail, analog, and vendor specific hardware/software
• MSP specific experience strongly desired
• Excellent problem solving and client relationship skills
• Excellent verbal and written communication skills
• Ability to learn and retain new technology skills and troubleshooting processes, team player, maintain calm and present yourself professionally in high stress situations.

Job Summary

Role and Responsibilities

• Deliver an excellent customer experience in all interactions
• Resolve new and escalated service tickets, provide guidance for or personally resolve aging and complex issues
• Troubleshoot and resolve client emergencies with minimal oversight, escalating to senior engineering resources where necessary
• Serve as an escalation point to mentor and coach team members
• Assist clients with the design and implementation, installation, configuration and ongoing usability of desktop computers, mobile devices, peripheral equipment, telephony systems, servers, storage, networking and software
• Work with vendor representatives to resolve software and hardware issues
• Install and/or upgrade Microsoft Windows Server Operating Systems
• Perform advanced virus, malware and ransomware mediation
• Provide professional quality server room cable management
• Responsible for creating and maintaining high quality, detailed documentation 
• Resolve backup issues and perform restore testing
• Install, configure, support complex virtual environments with High Availability in VMWare ESXi and Hyper-V environments
• Work with clients to harden security posture through policy and advanced technologies according to Abacus standards and processes
• Communicate with clients as required:  Keeping them informed of incident progress, notifying them of impending changes or agreed upon outages
• Take part in after hours
• On Call rotation as needed – must have a minimum of 6 months experience at Abacus and have supervisor approval before joining rotation.
• Accountable for continued customer satisfaction and coordinates all activities with the client, assists with client training while representing Abacus in a professional manner
• Perform on-site technical and customer service support, to include:
  • Emergency/unscheduled repairs of clients’ on-site technical systems and equipment
  • Performs scheduled maintenance and repairs of clients’ technical systems and equipment
  • Network switch and server room cable management
  • Diagnoses, troubleshoots, repairs, and debugs complex technical and computer systems, and software
  • Follow standard procedures to isolate and fix problems in malfunctioning equipment or software.
  • Performs routine cleanup of client network closets including labeling, removal of unneeded equipment, and updating of documentation
• Demonstrate proficiency in reporting activities, maintaining local spare parts inventories, recording time and travel expense records and client log records
• Exhibit adaptability and is willing to alter shifts and job requirements to meet the needs of clients and Abacus
• Comply with all safety requirements, including but not limited to: completing all required training, following all guidance provided in Abacus policies, procedures, field guidelines, reporting requirements, and technical advisories.  Demonstrates a pro-active approach toward safety, health, and quality in compliance with all Company, governmental and customer requirements
• Lead teams on standard projects (i.e. system migrations, virtual server configurations, server and firewall installations, office setups and moves, VPN tunnel configurations)
• Participate in project planning, solution delivery, mentoring and teaching improved processes to team members
• Follow Abacus’s defined processes, policies, service delivery standards 
• All other duties assigned.

Qualifications and Education Requirements

• Associates degree in technology related field OR equivalent combination of education and work experience
• A minimum of 3+ years of experience in IT Support, working in Microsoft Environments
• Required certifications:  Network +, Server +, Windows Server 70-410, 98-365 or equivalent
• Complete other technical and professional development as outlined in development plan
• Understanding of Windows 2016/2012/2008 servers, Active Directory, SQL, Sharepoint, Exchange Servers, Backup Technologies, Internet/DNS/E-mail/Communication issues
• Knowledge of VMWare, Citrix, VPN and Terminal Services
• Knowledge of VoIP, voicemail, analog, and vendor specific hardware/software
• MSP specific experience strongly desired
• Excellent problem solving and client relationship skills
• Excellent verbal and written communication skills
• Ability to learn and retain new technology skills and troubleshooting processes, team player, maintain calm and present yourself professionally in high stress situations.

Job Summary

Role and Responsibilities

• Deliver an excellent customer experience in all interactions
• Resolve new and escalated service tickets, provide guidance for or personally resolve aging and complex issues
• Troubleshoot and resolve client emergencies with minimal oversight, escalating to senior engineering resources where necessary
• Serve as an escalation point to mentor and coach team members
• Assist clients with the design and implementation, installation, configuration and ongoing usability of desktop computers, mobile devices, peripheral equipment, telephony systems, servers, storage, networking and software
• Work with vendor representatives to resolve software and hardware issues
• Install and/or upgrade Microsoft Windows Server Operating Systems
• Perform advanced virus, malware and ransomware mediation
• Provide professional quality server room cable management
• Responsible for creating and maintaining high quality, detailed documentation 
• Resolve backup issues and perform restore testing
• Install, configure, support complex virtual environments with High Availability in VMWare ESXi and Hyper-V environments
• Work with clients to harden security posture through policy and advanced technologies according to Abacus standards and processes
• Communicate with clients as required:  Keeping them informed of incident progress, notifying them of impending changes or agreed upon outages
• Take part in after hours
• On Call rotation as needed – must have a minimum of 6 months experience at Abacus and have supervisor approval before joining rotation.
• Accountable for continued customer satisfaction and coordinates all activities with the client, assists with client training while representing Abacus in a professional manner
• Perform on-site technical and customer service support, to include:
  • Emergency/unscheduled repairs of clients’ on-site technical systems and equipment
  • Performs scheduled maintenance and repairs of clients’ technical systems and equipment
  • Network switch and server room cable management
  • Diagnoses, troubleshoots, repairs, and debugs complex technical and computer systems, and software
  • Follow standard procedures to isolate and fix problems in malfunctioning equipment or software.
  • Performs routine cleanup of client network closets including labeling, removal of unneeded equipment, and updating of documentation
• Demonstrate proficiency in reporting activities, maintaining local spare parts inventories, recording time and travel expense records and client log records
• Exhibit adaptability and is willing to alter shifts and job requirements to meet the needs of clients and Abacus
• Comply with all safety requirements, including but not limited to: completing all required training, following all guidance provided in Abacus policies, procedures, field guidelines, reporting requirements, and technical advisories.  Demonstrates a pro-active approach toward safety, health, and quality in compliance with all Company, governmental and customer requirements
• Lead teams on standard projects (i.e. system migrations, virtual server configurations, server and firewall installations, office setups and moves, VPN tunnel configurations)
• Participate in project planning, solution delivery, mentoring and teaching improved processes to team members
• Follow Abacus’s defined processes, policies, service delivery standards 
• All other duties assigned.

Qualifications and Education Requirements

• Associates degree in technology related field OR equivalent combination of education and work experience
• A minimum of 3+ years of experience in IT Support, working in Microsoft Environments
• Required certifications:  Network +, Server +, Windows Server 70-410, 98-365 or equivalent
• Complete other technical and professional development as outlined in development plan
• Understanding of Windows 2016/2012/2008 servers, Active Directory, SQL, Sharepoint, Exchange Servers, Backup Technologies, Internet/DNS/E-mail/Communication issues
• Knowledge of VMWare, Citrix, VPN and Terminal Services
• Knowledge of VoIP, voicemail, analog, and vendor specific hardware/software
• MSP specific experience strongly desired
• Excellent problem solving and client relationship skills
• Excellent verbal and written communication skills
• Ability to learn and retain new technology skills and troubleshooting processes, team player, maintain calm and present yourself professionally in high stress situations.

Role overview

As a Senior Process Engineer at ASM, you will work with semiconductor processing and analytical equipment to research, develop and optimize processes focused on oxidation, annealing, curing, Atomic Layer Deposition (ALD, PEALD), Epitaxy or PECVD for logic, memory, analog, power, and MEMS applications. You will design and conduct complex experiments, measurements and perform the interpretation of complex experimental output. While you deliver creative and inventive solutions, technical publications, and generation of Intellectual Property (IP) are an essential function of this position. 

Note: This role is intended for candidates who are graduating in Spring 2026 or have graduated within the past two years and have 0–2 years of professional work experience.

Responsibilities 

• Creative problem solver with experience in developing new films for emerging applications and experience in chemistry/materials characterization.
• Works with semiconductor processing equipment to research, develop and optimize unit processes focused on the deposition of metal and dielectric films via ALD, PEALD, Epitaxy, and/or PECVD.
• Bringing innovative ideas, staying abreast of state-of-the-art processing applications in the semiconductor industry to be effective.
• Process consulting and accountability including technical papers on advanced process applications and Intellectual Property creation.
• Participates in and drives technical problem-solving sessions using the related scientific method and industry tools, such as Ishikawa diagrams.
• Designs and conducts experiments, in addition to measuring and interpreting experimental output, aimed at fulfilling stated objectives using Design of Experiments (DOE) and Response Surface Methodology (RSM).
• Troubleshoots equipment problems and is personally and actively engaged in problem via “hands-on” modalities.
• Works with customers and central marketing to understand and define requirements to successfully execute and document customer demonstrations.
• Develops methods and techniques for integrating metal and/or oxide films into existing and future device technologies.
• Ensures successful product transfer to customer base by performing demonstrations, training field service personnel, traveling to support remote sites (up to 10% travel required), and drafting documentation regarding process development, tool operation and maintenance.
• Produces technical papers on process, equipment, and device integration improvement strategies and presents to professional audience.
• You may be assigned supervisory duties over supporting process engineering technicians and aides. These supervisory duties could include direct input into employees’ performance evaluations, discipline, and discharge.

Minimum Qualifications

• We are looking for candidates who have graduated within the last 0-2 years or will graduate in Spring or Fall 2025 and are eager to begin or advance their career.
• Master’s or PhD degree in Chemical Engineering, Materials Science, Electrical Engineering, or Physics.
• 0-7+ years of combined education, research, and work experience with:
• Cure, oxidation, ALD, CVD, Epitaxy, PECVD and/or other thin film deposition.
• Materials characterization techniques such as XPS, SIMS, RBS, AFM, XRR, XRD, TEM, SEM and ellipsometry.
• Knowledge of electrical characterization techniques for CMOS devices.
• Application of dielectric and/or metal films for logic and memory structures.
• Training in CFD (computational fluid dynamics), either theoretical or practical is preferred.
• Knowledge of electrical characterization techniques for CMOS devices is preferred.
• Graduating in Fall 2025 or graduated within the past two years.
• 0–2 years of professional work experience.

Preferred Qualifications

• Ability to independently manage complex process development projects, including personnel, project schedules, experimental thrusts, hardware procurement and budgetary oversight.
• Ability to be a process consultant to internal and external customers.
• An authority on interplay between hardware design (e.g., chemical reactor design) and operation and process outputs
• Understanding of requirements for integration of metals as work function materials and barrier layers in FEOL and BEOL process flows
• Demonstrated ability to develop and completely characterize deposition processes using first principles and experimental design techniques (e.g., DOE, RSM).
• Experience with the theory, practice, and interpretation of materials characterization techniques such as XPS, SIMS, RBS, AFM, XRD, HRTEM, FESEM, Auger, Raman and ellipsometry.
• Excellent verbal and written communication skills, with ability to clearly communicate advanced technical constructs in direct and concise manner.

The Opportunity

InCharge Energy is seeking a detail-oriented Electric Vehicle Charging Station (EVCS) Technician to enhance our service operations and contribute to our ongoing growth. Service is at the core of our company, supported by cutting-edge software, expert project management, and seamless equipment integration. These elements reinforce our service division, positioning it as a key driver in the company’s growth strategy. The EVCS Technician will work within the service operations division, reporting directly to the Field Service Manager. This role presents an exciting opportunity to work with state-of-the-art equipment and deliver exceptional service, playing a vital role in our mission to support the transition to electric vehicles. You’ll also receive a company vehicle to use for work purposes, equipped with GPS tracking for safety and accountability.

What You’ll Do

• Diagnose and repair electrical charging infrastructure with precision using advanced tools and techniques, from computer diagnostics to basic electrical repairs
• Maintain meticulous records for all repairs and installations and coordinate seamlessly with third parties/vendors to ensure flawless project execution
• Ensure all services and projects are completed on time, within scope, and budget, with a keen focus on resource allocation and client satisfaction
• Proactively offer clients additional services, including service agreements, preventative maintenance plans, InControl monitoring software, and other revenue-generating items. Create warm leads for the sales team to explore opportunities for selling additional EV chargers and ask for referrals to expand our customer base
• Provide and maintain your own basic hand tools required for performing work on EV chargers
• Adhere to all safety protocols and procedures to ensure a safe working environment. Maintain a high standard of safety practices while working with high voltage and in various environmental conditions
• Track charging infrastructure performance, provide detailed progress reports, and escalate issues to management as needed
• Uphold the highest standards of professionalism at client sites and foster strong relationships with third parties/vendors
• Continue developing your expertise through ongoing training and certifications provided by InCharge Energy.

Your Experience and Capabilities

• 2+ years of hands-on experience in electrical, EV, or a related client-facing role
• Associate’s degree or certification in a relevant technical field
• Journeyman’s license or higher, or formal electrical training, is strongly preferred
• Strong knowledge of electric vehicle charging systems, electric vehicle technology, and electrical systems
• Proven ability to troubleshoot electrical and mechanical issues effectively
• Self-starter with a proactive attitude and adaptability to start-up environments
• Excellent communication skills and attention to detail
• Valid driver’s license, with a clean driving record and ability to travel 75%+ within your assigned territory and nearby regions; occasional travel across the U.S. may be required

Physical and Environmental Demands

• Include but are not limited to: lifting, bending, climbing, kneeling, reaching, sitting, standing, working from ladders, walking, working in extreme temperatures (cold/heat), confined quarters, excessive noise, and high voltage
• Must be comfortable independently operating a vehicle for extended periods and flying domestically for work-related travel

Job Requirements

• Must provide and maintain your own set of hand tools necessary to perform the duties of the role
• Flexibility to work occasional overtime or adjusted hours to support service schedules and customer needs
• Must maintain a clean driving record and comply with all company vehicle and safety policies

Lucid is seeking a Senior Manager, Program Management to support the Supply Chain organization. This role is responsible for leading program management activities for new vehicle programs and launches, sourcing activities, ensuring alignment and execution across the Supply Chain team to deliver on cost, timing, and quality objectives.

BASE SALARY: $150,000 to $190,000 per year, paid semi-monthly

MUST HAVE:

• 5+ years of experience in data engineering within fast-paced, cloud-native environments
• Deep expertise in Python, SQL, Docker, and AWS (S3, Glue, Kinesis, Athena/Presto)
• Experience building and managing scalable ETL pipelines and data lake infrastructure
• Familiarity with distributed systems, Spark, and data quality best practices
• Strong cross-functional collaboration skills to support BI, analytics, and engineering teams

EXPERIENCE: 5+ years of data engineering experience in an AWS-based environment where data powers decision-making across product, marketing, and operations.

YOUR ROLE

Lead scalable data engineering efforts that empower cross-functional teams with reliable, timely, and actionable data, ensuring Launch Potato’s analytics and business intelligence infrastructure fuels strategic growth.

OUTCOMES

• Build and optimize scalable, efficient ETL and data lake processes that proactively catch issues before they impact the business
• Own the ingestion, modeling, and transformation of structured and unstructured data to support reporting and analysis across all business units
• Partner closely with BI and Analytics to deliver clean, query-ready datasets that improve user acquisition, engagement, and revenue growth
• Maintain and enhance database monitoring, anomaly detection, and quality assurance workflows
• Serve as the internal point of contact for reporting infrastructure—delivering ad hoc data analyses and driving consistent data integrity
• Drive adoption and advancement of Looker dashboards by ensuring robust and scalable backend data support
• Contribute to the future of Launch Potato’s data team by mentoring peers and shaping a high-performance, quality-first engineering culture

COMPETENCIES

• Data Engineering Mastery: Demonstrates technical excellence in building data pipelines, troubleshooting distributed systems, and scaling infrastructure using AWS and open-source tools
• Cross-Functional Collaboration: Communicates clearly across technical and non-technical teams, translating business needs into robust data solutions
• Proactive Ownership: Operates with a strong sense of accountability; identifies and solves data issues independently and efficiently
• Quality-Driven Execution: Holds a high bar for data accuracy, auditability, and documentation throughout all systems and workflows
• Strategic Thinking: Anticipates how data infrastructure impacts wider company OKRs and proactively suggests improvements and innovations
• Growth Mindset: Seeks out opportunities to elevate team capabilities, mentor others, and stay ahead of evolving best practices in data engineering

TOTAL COMPENSATION

Base salary is set according to market rates for the nearest major metro and varies based on Launch Potato’s Levels Framework. Your compensation package includes a base salary, profit-sharing bonus, and competitive benefits. Launch Potato is a performance-driven company, which means once you are hired, future increases will be based on company and personal performance, not annual cost of living adjustments.