We're looking for an experienced Mechanical Engineer for unmanned aircraft systems (UAS) is responsible for the design, development, and optimization of mechanical systems for unmanned aerial vehicles (UAVs) and other aerospace applications. This role focuses on creating innovative and reliable mechanical components for UAVs, ensuring their structural integrity, performance, and compliance with industry standards. The engineer will work with cross-functional teams to advance UAS technologies in sectors such as defense, commercial aviation, and space exploration.

Responsibilities:

• Design and Development: Design mechanical components and systems for UAVs and other aerospace vehicles, including airframes, propulsion systems, control surfaces, landing gears, and payload integration.
• Prototyping and Testing: Build and test UAV prototypes to ensure mechanical reliability and performance, including ground and flight tests to validate designs.
• Structural Analysis: Conduct stress, strain, and fatigue analysis on UAV structures and systems to ensure they can withstand operational conditions such as high speeds, altitudes, and varying temperatures.
• Thermal Management: Design and analyze thermal systems to manage heat dissipation, especially for high-performance UAVs and aerospace applications.
• System Integration: Collaborate with electrical, avionics, and software engineers to integrate mechanical systems with sensors, communication, and control systems in unmanned aircraft.
• Material Selection: Evaluate and select lightweight, high-performance materials for UAVs, optimizing for fuel efficiency, durability, and strength.
• Failure Analysis: Perform root cause analysis on mechanical system failures and develop solutions to enhance the safety and performance of UAVs.
• UAV Maintenance and Repair Procedures: Develop guidelines for the inspection, maintenance, and repair of UAV mechanical systems to ensure long- term operational efficiency.
• Regulatory Compliance: Ensure all designs meet relevant UAS regulations and industry standards.
• Engage in R&D for cutting-edge UAS technologies, including autonomous systems, additive manufacturing, and advanced composite materials. 
• Documentation: Create detailed reports, design specifications, maintenance manuals, and testing documentation for UAS mechanical systems. 

Qualifications: 

• Education: Bachelor’s, Mechanical or Aerospace Engineering degree or equivalent experience.
• Experience: 3-7+ years of experience in engineering roles.

Skills:

• Proficiency in CAD and mechanical design software (e.g., SolidWorks)
• Knowledge of geometric dimensioning and tolerancing (GD&T) and drafting
• Experience with design for manufacturability (DFMA) and tooling design
• Experience with finite element analysis (FEA) and other simulation tools
• Knowledge of fluid dynamics, thermodynamics, structural mechanics, and aerodynamics
• Strong analytical, problem-solving skills, and ability to mentor
• Some experience in project management skills

Preferred Qualifications:

• Proficiency in CAD primarily for aerospace and UAS applications
• Proficiency in detailed design including geometric dimensioning and tolerancing (GD&T) and drafting.
• Understanding of UAV manufacturing processes, including 3D printing and advanced composite materials.
• Familiarity with UAV-specific regulations and broader aerospace certification processes (e.g., DO-160, AS9100).
• Strong project management skills

Pay Range by Level for Fort Walton Beach, FL

Level III - $106k - $132k
Level IV - $132k - $160k

About the Team:

The Recovery team is an integral part of the Cape Canaveral launch site, primarily responsible for the design, construction, and operation of the vessels used to recover the Terran R launch vehicle. This scope includes everything from vessel design and maintenance to the safing and securing of the rocket post-flight. We collaborate closely with teams across the company, including launch pad fluids engineers, rocket engine designers, and vehicle operators.

About the Role:

• Assist in bringing the Terran R Recovery barge from concept layouts to detailed plans, followed by supporting construction and activation efforts
• Responsible for the detailed layout, configuration and implementation of Terran R Recovery Barge systems, including everything from consoles and lighting to thrusters, power distribution, fire suppression and fuel storage
• Support build, activation, and certification of the Recovery vessel subsystems
• Safely support system checkouts for vessel power and dynamics systems
• Support operation and troubleshooting of vessel systems leading up to and during the Terran R flight campaigns
• Work with engineers and technicians to develop guides, plans and training to ensure safe operation of the Recovery vessel

About You:

• Bachelor’s degree in Mechanical Engineering, Marine Engineering, Aerospace Engineering, or a related engineering field from an accredited institution
• At least one (1) year of experience in vessel layout, vessel design, vessel construction, or related marine engineering work
• Demonstrated knowledge of engineering fundamentals and first principles
• Proficiency in computer-aided design (CAD) software
• Experience performing engineering analysis using finite element analysis (FEA), hand calculations, or equivalent analytical methods
• Ability to travel for extended periods as required by business needs, including work in shipyards, offshore locations, and industrial environments
• Ability to communicate effectively with cross-functional teams and stakeholders

Nice to haves but not required:

• Experience safely operating or supporting hazardous systems, including high-pressure, high-voltage, and/or cryogenic systems, in accordance with applicable safety standards
• Experience working with or applying regulatory requirements and standards issued by the U.S. Coast Guard (USCG), NASA, or comparable regulatory bodies
• Experience implementing or supporting dynamic positioning (DP) control systems in high-precision operational environments
• Working knowledge of commercial marine vessel regulations, including vessel design, construction, and operational requirements
• Experience working in shipyard or offshore production environments
• Experience supporting vessel build or retrofit programs

Successful candidates must clear a background check administered by the US government to obtain clearance for on-site work at our government partner location in Cape Canaveral, Florida.

Job Summary:

The Quality Engineer is responsible for ensuring that all components and processes in the Cover Glass Integrated Solar Cell Production Line meet internal quality standards and customer specifications. This includes planning, implementing, and monitoring quality control systems, investigating issues, and driving continuous improvement initiatives to enhance product reliability and production efficiency.

Key Responsibilities:

• Quality Control & Assurance:
• Develop and implement quality control procedures for the cover glass lamination, cell integration, laser processing, and encapsulation steps.
• Monitor process quality through in-line inspection, SPC (Statistical Process Control), and end-of-line testing.
• Ensure compliance with ISO 9001 and other relevant quality standards.
• Inspection & Testing:
• Define and oversee inspection criteria for incoming materials (glass, interconnects, encapsulants) and finished products.
• Coordinate root cause analysis for non-conforming materials or processes using tools such as 5 Whys, Fishbone (Ishikawa), and FMEA.
• Use metrology tools (e.g., microscope, profilometer, solar simulator) to verify process integrity.
• Documentation & Reporting:
• Maintain accurate documentation for quality records, audits, deviations, and CAPAs (Corrective and Preventive Actions).
• Generate quality reports and dashboards to track KPIs such as yield, defect rates, and rework costs.
• Process Improvement:
• Collaborate with R&D, production, and engineering teams to optimize manufacturing processes and reduce variability.
• Lead or support Six Sigma or Lean Manufacturing initiatives to improve product quality and manufacturing efficiency.
• Audits & Compliance:
• Participate in internal and external quality audits.
• Ensure compliance with environmental, safety, and product certification standards applicable to solar panel production.

Qualifications:

• Bachelor’s degree in Mechanical Engineering, Materials Science, Electrical Engineering, or related field.
• 2–5 years of quality engineering experience in a high-tech manufacturing environment (solar, semiconductor, glass, or electronics preferred).
• Working knowledge of quality tools (SPC, DOE, FMEA, MSA).
• Familiarity with standards such as ISO 9001, IEC 61215/61730 for solar cells/modules.
• Experience with root cause analysis and continuous improvement methodologies.
• Strong analytical, communication, and documentation skills.

Preferred Skills:

• Experience with optical inspection systems or laser processing quality control.
• Proficiency in using quality software such as Minitab, JMP, or similar.
• Green Belt or higher in Six Sigma is a plus.
• Familiarity with cleanroom protocols and ESD safety.

Job Summary:

The Quality Engineer will oversee and ensure the quality standards and processes throughout the battery pack manufacturing line. This role is critical in maintaining high product reliability, safety, and compliance with industry standards. The engineer will collaborate closely with production, design, and supply chain teams to implement quality control measures, conduct root cause analysis, and drive continuous improvement initiatives.

Key Responsibilities:

• Develop, implement, and maintain quality assurance processes specific to battery pack assembly and testing.
• Perform in-line inspections, process audits, and product testing to ensure compliance with design specifications and safety standards.
• Analyze data from production and testing to identify trends, defects, and areas for improvement.
• Lead root cause analysis and corrective/preventive actions (CAPA) for quality issues detected during production or post-production.
• Collaborate with suppliers and internal teams to ensure incoming components meet quality standards.
• Support validation and qualification of new battery pack designs and manufacturing processes.
• Ensure compliance with industry regulations (e.g., UL, IEC, ISO standards) and customer requirements.
• Document and maintain quality records, inspection reports, and quality control plans.
• Provide training and guidance to production personnel on quality standards and procedures.
• Participate in continuous improvement initiatives such as Lean, Six Sigma, or Kaizen to enhance product quality and process efficiency.
• Coordinate with the safety and reliability engineering teams to assess battery pack performance and durability.
• Support internal and external audits related to quality and manufacturing processes.

Qualifications:

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Chemical Engineering, or related technical field.
• Proven experience (3+ years) in quality engineering within battery pack manufacturing or related industries (e.g., electronics, automotive).
• Strong understanding of battery technologies, pack assembly processes, and safety standards.
• Proficiency with quality management systems (QMS) such as ISO 9001.
• Familiarity with statistical process control (SPC), root cause analysis tools (e.g., 8D, Fishbone), and quality improvement methodologies.
• Experience with test equipment and data acquisition systems used in battery production.
• Strong analytical skills and attention to detail.
• Excellent communication and teamwork skills.
• Knowledge of Arbin cyclers, Amada welding machines, or similar battery testing and assembly equipment is a plus.

Preferred Skills:

• Certification in Quality Engineering (CQE) or Six Sigma Green/Black Belt.
• Experience with battery cell screening, aging, and cycling.
• Familiarity with software tools such as Minitab, JMP, or similar statistical analysis programs.

Position Overview

We are seeking a highly skilled Propulsion Manufacturing Engineer to support the design, assembly, integration, and testing of electric propulsion thrusters for Low Earth Orbit (LEO) satellite applications. The ideal candidate will have hands-on experience with propulsion system hardware, electrical and plasma thrusters, and production line processes to ensure reliable, repeatable, and high-quality manufacturing.

Key Responsibilities

• Develop and maintain manufacturing processes for electric propulsion thrusters and subsystems, including assembly, bonding, welding, and integration.
• Support production line setup, tooling design, and workflow optimization to improve yield, cycle time, and throughput.
• Collaborate with design engineers to ensure manufacturability of propulsion system components and assemblies.
• Define and implement quality control procedures including ESD protection, contamination control, vacuum compatibility, and leak testing.
• Support the assembly, integration, and verification (AIV) of propulsion modules, including electrical connections, harness routing, and fluid/electrical interfaces.
• Troubleshoot and resolve issues related to plasma thrusters, ion engines, Hall-effect thrusters, and PPU integration.
• Conduct DFM/DFX reviews to enhance reliability and manufacturability.
• Develop detailed work instructions, assembly documentation, and test procedures for technicians and operators.
• Participate in qualification and acceptance testing, including vibration, thermal vacuum (TVAC), and functional testing of thruster subsystems.
• Drive continuous improvement initiatives for cost reduction, process automation, and scalability for satellite constellations.

Qualifications

• Bachelor’s or Master’s degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, or related field.
• Hands-on experience with electric propulsion systems (Hall thrusters, ion thrusters, or similar plasma propulsion technologies).
• Familiarity with vacuum chamber operations, leak detection methods, and contamination control.
• Experience with satellite manufacturing standards (ECSS, NASA, IPC, or equivalent).
• Strong knowledge of electrical integration, power processing units (PPUs), and harnessing in propulsion systems.
• Proficiency in CAD software (CATIA, NX, SolidWorks, or similar) for design-for-manufacturing activities.
• Knowledge of manufacturing processes such as precision machining, brazing, welding, additive manufacturing, and surface treatments.
• Strong problem-solving, documentation, and cross-disciplinary collaboration skills.
• Experience in cleanroom and ESD-controlled environments is highly desirable.

Preferred Skills

• Previous experience in LEO satellite propulsion integration.
• Familiarity with thruster lifetime testing and endurance campaigns.
• Understanding of propellant systems (Xenon, Krypton, or alternative propellants).
• Knowledge of automation and digital manufacturing tools.

This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands. 

Position Summary:

The Lead Manufacturing Engineer / Manufacturing Engineering Manager will oversee and optimize manufacturing processes for the Cover Glass Integrated Solar Cell (CIC) production line. This role focuses on improving yield, throughput, process reliability, and equipment efficiency and managing production line personnel. This position will lead cross-functional teams, drive continuous improvement initiatives, and ensure compliance with safety and quality standards.

Key Responsibilities:

• Process Development & Optimization:
• Lead development, qualification, and scaling of processes for cover glass lamination, laser cutting, interconnect integration, and solar cell encapsulation.
• Implement Design for Manufacturability (DFM) principles for new product introductions (NPI).
• Perform root cause analysis and implement corrective actions for process deviations and yield loss.
• Production Support:
• Provide hands-on technical support to resolve day-to-day production issues across the CGISC line.
• Maintain and improve key process parameters (KPPs) to ensure consistent quality and throughput.
• Lead troubleshooting and failure analysis of mechanical and process equipment.
• Equipment & Tooling:
• Specify, procure, and qualify production equipment and fixtures.
• Collaborate with equipment vendors for installation, calibration, and maintenance strategies.
• Leadership & Collaboration:
• Lead engineering teams and mentor junior engineers and technicians.
• Interface with R&D, Quality, Supply Chain, and Maintenance to align manufacturing goals with broader company objectives.
• Lean & Continuous Improvement:
• Apply Lean Manufacturing, Six Sigma, and SPC methods to reduce waste and improve line efficiency.
• Develop and sustain Standard Operating Procedures (SOPs) and Work Instructions.
• Data & Reporting:
• Analyze process data to monitor trends, detect abnormalities, and drive decisions.
• Generate technical documentation, process maps, and reports for stakeholders.

Qualifications:

• Bachelor’s or Master’s degree in Mechanical Engineering, Manufacturing Engineering, Materials Science, or related field.
• 5–10 years of experience in high-tech manufacturing, preferably in photovoltaic, semiconductor, or display panel industries.
• Strong knowledge of glass processing, solar module assembly, laser operations, or thin-film technology.
• Experience with statistical analysis tools (JMP, Minitab), MES systems, and CAD software, or similar.
• Demonstrated leadership in cross-functional project management and production scaling.

Preferred Skills:

• Familiarity with ISO 9001, ISO 14001, or similar quality/environmental standards.
• Knowledge of automation systems, robotics, and cleanroom manufacturing.
• Hands-on experience with FMEA, DOE, and SPC implementation.

Work Environment:

• Split between cleanroom manufacturing floor and engineering office.
• Occasional travel to vendor or partner facilities as required.
• Occasional off-hours support for shift operations or emergencies.

Position Overview

We are seeking a Launch Operations Mechanical Engineer Lead who will own and drive all mechanical integration activities at the launch site. This role provides technical authority and execution leadership throughout the launch campaign, ensuring mechanical readiness, risk mitigation, and flawless execution for flight hardware and Mechanical Ground Support Equipment (MGSE). The Lead serves as the primary on-site mechanical authority, bridging design, manufacturing, and launch operations while mentoring engineers and coordinating across internal and external partners to ensure mission success.

Key Responsibilities

• Lead and own mechanical integration efforts at the launch site, ensuring satellites and launch adapters are flight-ready and fully certified for launch.
• Define and execute the mechanical integration strategy, sequencing, and risk mitigation throughout launch campaigns.
• Lead the design, qualification, and deployment of Mechanical Ground Support Equipment (MGSE).
• Serve as the primary technical authority for mechanical issues during integration, testing, and launch operations.
• Coordinate mechanical activities with systems engineering, integration teams, test operations, launch vehicle providers, and range operations.
• Review and approve mechanical procedures, work instructions, and non-conformance dispositions.
• Provide technical mentorship, guidance, and task leadership to mechanical engineers and technicians.
• Drive continuous improvement across mechanical processes, tooling, and launch site operational workflows.

Qualifications

Education:

Bachelor’s degree in Mechanical Engineering or Aerospace Engineering.

Experience:

• A minimum of 8 years of experience in the aerospace industry or a comparable high‑reliability manufacturing environment.
• Demonstrated ownership of hardware or subsystem integration from design through launch.
• Advanced background in mechanical engineering with extensive aerospace hardware integration and MGSE experience.
• Demonstrated experience as a technical or subsystem lead in launch base or cleanroom environments.
• High proficiency in CAD tools (e.g., Inventor (preferred), CREO, SolidWorks, Catia).
• Deep understanding of aerospace mechanical standards, safety protocols, and configuration control.

Preferred Qualifications:

• Prior experience serving as a lead or responsible engineer during a full launch campaign.
• Advanced proficiency in GD\&T and precision interface management.
• Experience working directly with launch vehicle providers and external partners.
• Experience leading small teams or directing cross‑functional integration efforts.

Soft Skills:

• Strong technical leadership and confident decision‑making capability.
• Excellent cross‑functional communication and stakeholder management skills.
• High attention to detail with strong ownership, accountability, and follow‑
• Ability to lead effectively during critical or time‑sensitive operations.

Technology Stack:

• CAD Tools: AutoDesk Inventor (preferred), SolidWorks, NX, Creo
• Analysis Tools: Finite Element Analysis (FEA) experience preferred
• Data/Documentation Systems: Fusion or equivalent PDM/PLM tools
• General Tools: Microsoft Office Suite

Physical Requirements:

• Hands-on work with flight hardware, test setups, and precision instruments.
• Ability to lift and move up to 50 lbs.
• Availability for extended or irregular shifts during launch campaigns.

This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands. 

Position Overview

We are seeking a Launch Operations Mechanical Engineer who plays a critical role in the final, high‑stakes phase of mission success. This position oversees mechanical processes and equipment at the launch base, ensuring all systems meet rigorous aerospace standards. The role bridges the gap between design and flight, managing the physical build, qualification, and configuration of the satellite while supporting the design of essential Mechanical Ground Support Equipment (MGSE) used across launch site operations. 

Key Responsibilities

• Lead mechanical integration efforts at the launch site, ensuring the satellite is flight-ready and configured according to mission specifications.
• Design and implement Mechanical Ground Support Equipment (MGSE), including handling fixtures, transport containers, and integration stands.
• Oversee the mechanical assembly and qualification testing of satellite hardware to meet safety and performance requirements prior to launch.
• Enforce strict aerospace mechanical standards and safety protocols to mitigate risk and ensure mission reliability.
• Collaborate closely with integration, systems engineering, and launch vehicle teams to align mechanical activities with the overall launch schedule. 

Qualifications 

Education:

Bachelor’s degree in mechanical engineering or aerospace engineering. 

Experience:

• A minimum of 5 years of direct experience in the aerospace industry or a high‑flow manufacturing environment.
• Experience supporting the full lifecycle of a product—from design and build through final qualification and deployment.
• Strong background in mechanical engineering with a focus on aerospace hardware integration and MGSE design.
• Experience working in high-pressure launch base or cleanroom environments where precision is paramount.
• Proficiency in CAD software (e.g., CREO, SolidWorks, or Catia) for developing ground support hardware.
• Deep understanding of aerospace mechanical standards and safety protocols.
• Ability to troubleshoot complex mechanical issues on the fly during critical integration windows.

Preferred Qualifications:

• Experience with automated integration systems used in large‑scale aerospace assembly.
• Advanced proficiency in Geometric Dimensioning and Tolerancing (GD\&T) for high‑precision mechanical interfaces.
• Prior experience overseeing small teams or managing hardware subsystems throughout a launch campaign. 

Soft Skills:

• Strong interpersonal skills.
• Proven ability to collaborate effectively within cross‑functional teams.
• Excellent written and verbal communication skills.
• Meticulous attention to detail to ensure the accuracy of documentation and project deliverables. 

Technology Stack:

• CAD Tools: AutoDesk Inventor, SolidWorks, NX, Creo
• Analysis Tools: Finite Element Analysis (FEA) experience is a plus
• Data/Documentation Systems: Fusion or equivalent PDM/PLM tools
• General Tools: Microsoft Office Suite (Word, Excel, PowerPoint, Project) 

Physical Requirements:

• Ability to work hands-on with flight hardware, test setups, and precision instruments.
• Ability to lift and move up to 25 lbs.
• Availability for occasional extended shifts, particularly during critical launch operations.

This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands. 

Job Summary:

The Environmental Test Engineer (Vibration and TVAC) is responsible for planning, executing, and documenting mechanical and thermal-vacuum tests to verify the environmental durability of spacecraft components, subsystems, and full systems. This engineer ensures test campaigns meet customer and program requirements for qualification and acceptance.

Key Responsibilities:

• Develop and execute test plans and procedures for vibration (sine, random, shock) and thermal vacuum (TVAC) testing.
• Set up, calibrate, and operate test equipment including shakers, thermal chambers, vacuum chambers, and data acquisition systems.
• Collaborate with design, manufacturing, and systems engineering teams to define environmental test requirements.
• Perform real-time test monitoring and troubleshooting to ensure successful completion of test campaigns.
• Ensure all testing complies with relevant standards (e.g., MIL-STD-1540, NASA GEVS, ECSS).
• Coordinate with technicians to configure test setups, instrumentation, and test article fixturing.
• Lead or support root cause investigations for test anomalies or failures.
• Generate detailed test reports including data analysis, plots, and pass/fail criteria.
• Maintain equipment and ensure test facilities meet operational readiness.
• Participate in continuous improvement activities to enhance test efficiency, safety, and reliability.

Required Qualifications:

• Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, or related field.
• 3+ years of experience in environmental testing, preferably in aerospace or defense.
• Hands-on experience with electrodynamic shakers, TVAC chambers, accelerometers, thermal sensors, and DAQ systems.
• Strong knowledge of vibration and thermal environments relevant to spaceflight hardware.
• Familiarity with instrumentation setup, calibration, and data analysis.
• Ability to work in cleanroom environments and follow contamination control procedures.
• Excellent written and verbal communication skills.
• Strong analytical and problem-solving abilities.

Preferred Qualifications:

• Experience with software such as LabVIEW, TestStand, MATLAB, or Python for test automation and data analysis.
• Experience supporting launch vehicle or satellite environmental qualification campaigns.
• Knowledge of industry standards: MIL-STD-810, MIL-STD-1540, ECSS-E-ST-10-03C, etc.
• Familiarity with thermal modeling and simulation tools.

Working Conditions:

• May involve shift work and extended hours during test campaigns.
• Physical requirements may include lifting up to 50 lbs and working in confined or high-vacuum areas.
• Must be able to work in a fast-paced and collaborative environment with strict deadlines.

Position Summary:
We are seeking a highly skilled Battery Pack Engineer to support the design, assembly, testing, and production optimization of advanced battery packs. The ideal candidate will have hands-on experience in battery pack assembly, be familiar with Arbin battery cyclers for performance testing, and have expertise in Amada and Hesse welding machines for precision welding of battery interconnections and busbars. This role involves working closely with production teams, quality engineers, and R&D to ensure high reliability and performance of battery systems.

Key Responsibilities:

• Design & Development:
• Support the development and optimization of battery pack designs, layouts, and electrical schematics.
• Define process parameters for welding, joining, and bonding operations for battery modules.
• Collaborate with R&D on cell selection, pack configuration, and system integration.
• Production Support:
• Oversee battery pack assembly processes, ensuring adherence to quality standards and production schedules.
• Operate and maintain Amada and Hesse welding machines for busbar and tab welding, ensuring proper weld quality and consistency.
• Define and maintain SOPs, process documentation, and assembly work instructions.
• Testing & Validation:
• Perform battery cell and pack testing using Arbin cyclers, including charge/discharge cycling, capacity verification, and performance characterization.
• Support failure analysis, root cause investigations, and corrective actions for battery performance issues.
• Assist in battery safety, environmental, and reliability testing as per industry standards.
• Quality & Safety:
• Ensure compliance with ISO, IATF, and other relevant quality management standards.
• Implement quality control measures for welding joints, electrical connections, and thermal management components.
• Enforce ESD and high-voltage safety protocols during production and testing activities.
• Continuous Improvement:
• Identify opportunities for process automation, efficiency improvement, and cost reduction.
• Provide feedback to equipment and process engineering teams for ongoing optimization.

Qualifications & Skills:

• Education: Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Materials Science, or a related field.
• Experience:
• 2+ years of hands-on experience in battery pack design, assembly, or testing.
• Direct experience with Arbin battery test equipment and Amada welding systems (laser or resistance welding).
• Strong understanding of lithium-ion battery technology, cell balancing, and BMS integration.
• Technical Skills:
• Proficiency in interpreting electrical schematics, CAD drawings, and mechanical assembly diagrams.
• Knowledge of welding parameters (current, pressure, pulse) and weld inspection criteria.
• Familiarity with data acquisition, test data analysis, and failure mode analysis (FMEA).
• Soft Skills:
• Strong problem-solving and troubleshooting skills.
• Ability to work collaboratively in a cross-functional production environment.
• Excellent documentation, communication, and reporting skills.

Job Summary:

The Quality Engineer will be responsible for ensuring that thrusters and electric propulsion systems meet stringent quality standards throughout the production process. This role involves developing, implementing, and maintaining quality control procedures, conducting root cause analysis for defects, and driving continuous improvement initiatives to ensure product reliability and compliance with aerospace industry standards.

Key Responsibilities:

• Develop, implement, and maintain quality assurance and quality control processes for thruster and electric propulsion production lines.
• Perform inspections and audits of incoming materials, in-process components, and finished thrusters to verify compliance with design specifications and quality standards.
• Collaborate closely with manufacturing, engineering, and supply chain teams to identify and resolve quality issues promptly.
• Analyze production data and quality metrics to identify trends and areas for process improvement.
• Lead root cause analysis and corrective/preventive actions (CAPA) for quality non-conformances.
• Ensure compliance with relevant aerospace standards and customer requirements (e.g., AS9100, ISO 9001).
• Develop and maintain quality documentation including inspection plans, test procedures, and control charts.
• Support qualification and validation activities for new production processes and product introductions.
• Participate in supplier quality management and audits to ensure incoming components meet the required standards.
• Provide training and guidance on quality standards and best practices to production staff.
• Facilitate internal and external quality audits and respond to audit findings.
• Drive continuous improvement initiatives to enhance product quality, yield, and reliability.

Qualifications:

• Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, Electrical Engineering, or related field.
• Proven experience (3+ years) in quality engineering within aerospace manufacturing, preferably with electric propulsion or thruster production.
• Strong understanding of electric propulsion systems and their manufacturing processes is highly desirable.
• Proficient with quality tools such as FMEA, SPC, root cause analysis, and 8D problem solving.
• Familiarity with aerospace quality standards (AS9100, ISO 9001) and regulatory requirements.
• Excellent analytical, problem-solving, and communication skills.
• Experience with quality inspection tools and measurement equipment.
• Ability to work collaboratively in cross-functional teams and manage multiple priorities.

Preferred Skills:

• Experience with electrical and vacuum systems.
• Knowledge of thruster assembly, testing, and qualification processes.
• Experience with statistical software and quality data analysis.
• Continuous improvement certifications such as Six Sigma or Lean.

This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands. 

Position Summary

The R&D Mechanical Engineer (Level I- Sr.) is responsible for collaborating or leading the design, testing and certification of innovative electrical power products in collaboration with a diverse team of electrical, mechanical and manufacturing engineers. This role requires a strong intuition of fundamental engineering concepts across multiple disciplines and an ability to effectively manage the product development process under limited direction.

Key Responsibilities

• Ensure the execution and implementation of the New Product Introduction (NPI) engineering work for assigned projects.
• Collaborate with Senior and Lead Engineers in writing detailed engineering specifications and developing concept drawings in collaboration with Sales and other stakeholders.
• Coordinate with Nationally Recognized Testing Laboratories (NRTLs) to define product evaluation and certification scope.
• Lead the creation of detailed design drawings, 3D models and bills of material for prototype equipment and test articles.
• Develop and document test plans according to the relevant standards. Common tests include full-load temperature rise, dielectric and BIL, short-circuit and withstand current, mechanical endurance, component failure, environmental, functional and seismic shake-table tests.
• Support the testing process at in-house and third-party laboratories. Travel up to 20% to support testing and other product development tasks in-person. Evaluate test results and revise designs based on empirical data and established engineering concepts.
• Characterize the electrical, thermal and mechanical performance of common design elements through testing, simulation and/or analytical methods. Develop standard design criteria and models.
• Work closely with manufacturing engineering to implement Design for Manufacturability (DFM) concepts throughout the new product development process.
• Working with Mechanical Designers,
• Conduct failure analyses of existing products and identify opportunities for continuous improvement

Qualifications

• Minimum 3 years of experience designing low and/or medium voltage power distribution equipment or related products.
• BSME or equivalent in experience.
• Experience with NRTL (UL, CSA, etc.) evaluation, testing and certification processes.
• Experience with common standards for electrical equipment (UL 891, 1558, 508A; IEEE C37.20, etc.)
• Design Experience using SolidWorks to produce 3D models is highly preferred.

Position Summary

The BOD (Basis of Design) Program Manager is responsible for the leadership, planning and execution of multiple high priority and/or strategic BOD Projects; high-flow production orders in an engineer to order environment. This role ensures that all Engineering-related milestones (Design Reviews, Design Releases, Production Readiness Reviews, etc.) are completed on time and to the highest standards of quality. The BOD Program Manager will lead, manage and collaborate cross-functionally among Sales, Engineering, Operations, and Senior Management.

Key Responsibilities

• Lead cross-functional Project Teams, successfully driving projects to completion.
• Collaborate and influence resources managers to implement, monitor, and maintain the resources capacity planning for their projects.
• Schedule, facilitate, and document kickoff meetings, design reviews, and Production Readiness Reviews.
• Track progress of design activities across electrical, mechanical, wiring, manufacturing and process engineering disciplines
• Coordinate follow-up communications after Engineering release, ensuring Quality, Operations, and Sales have required documentation
• Act as the central point of communication for Sales, Engineering, Operations, and Senior Management on BOD Project status and deliverables.
• Coordinate with Operations to ensure production readiness: run the meeting, create punch lists, and follow up to resolution and provide formal notification to relevant stakeholders
• Coordinate change management for customer-driven change notices and major design revisions.
• Notify Senior Management and Engineering Leadership of gate review readiness and assist in lessons learned sessions for continuous process improvement
• Report project performance to management stakeholders
• Influence and support Project Management team members on best practices

Qualifications

Competencies:

• Demonstrated ability to plan, execute, and oversee complex process milestones on time and in accordance with company standards
• Proficiency with Project Management tools for scheduling, task tracking, and milestone monitoring
• Exceptional organizational skills to manage multiple tasks, meetings, and priorities simultaneously
• Strong verbal and written communication skills to effectively lead and coordinate cross-functional stakeholders
• Excellent analytical and problem-solving skills to identify process bottlenecks and drive resolution
• Commitment to continuous improvement and implementation of best practices
• Exceptional ability to build and maintain collaborative relationships with key stakeholders, including Senior Management.
• Proficient in Microsoft Office Suite (Project, Word, Excel, PowerPoint), and Microsoft Teams
• Familiarity with engineering review processes, production readiness protocols, and manufacturing process workflows.
• Strong ability to negotiate through conflicts; listening, understanding, problem solving, patience.

Education and Experience

• Bachelor’s degree in Engineering, Program Management, or related field
• 5+ years of project management or related experience within an engineering or manufacturing environment
• Demonstrated capability leading high complexity and/or strategic projects
• Experience facilitating technical design reviews and manufacturing readiness assessments
• Expert written and verbal communication skills
• PMP (Project Management Professional) or equivalent certification a plus

Workplace Conditions

• Flexible work location (on-site, hybrid, or remote based on business needs)
• Travel requirements based on Project and Stakeholder needs
• Collaborative, cross-functional team environment supporting Design Engineering delivery and Project Execution

Compensation

The salary range for this role is $130,000 -$150,000 per year, based on location, experience, and qualifications.

Position Summary

The Lead R&D Engineer is responsible for managing group engineers and leading the design and validation of new low voltage power distribution products. This role includes performing and overseeing complex projects that require extensive 3D modeling and 2D drafting while ensuring design accuracy and alignment with project requirements. The Lead R&D Engineer facilitates the development of innovative products that meet industry standards, regulatory requirements, and customer needs while optimizing performance, manufacturability, and cost. Additionally, the Lead R&D Engineer directly manages engineers and collaborates with the Engineering Manager to proactively identify and address project and personnel challenges, ensuring successful outcomes.

Key Responsibilities

•  Lead the design, analysis, and validation of new medium voltage power distribution products, including metal clad and metal enclosed switchgear, and related components.
• Responsible for managing and mentoring engineers and designers, providing career guidance, constructive feedback, tracking project timelines, and ensuring quality and efficiency in deliverables.
•  Working closely with the Engineering Manager to identify issues quickly and ensure they are addressed in an appropriate and timely manner.
•  Driving group on time performance while minimizing design errors for NPI project deliverables.
• Leading the development of mechanical designs to meet NPI project-specific requirements.
• Conducting peer reviews and providing constructive feedback to team engineers to improve design quality and ensure alignment with project goals.
•  Mentoring and supervising group engineers and designers to foster team growth and ensure efficient workflow in a collaborative environment.

New Process Implementation (NPI):

• Ensure NPI projects comply with customer specifications, industry standards, manufacturability, and internal quality benchmarks.
• Track project metrics such as TTM, design errors, and revision cycles to areas for improvement with the engineering manager.

Technical Leadership and Mentorship:

•  Foster a culture of innovation and continuous improvement within the team.
• Provide guidance and mentorship to team members, promoting professional growth.
• Resolve team conflicts to maintain a productive working environment.
• Assist in training team members in best practices for 3D SolidWorks modeling, 2D AutoCAD drafting, and compliance with design standards.
•  Provide constructive feedback during peer reviews to improve the team's technical output.

Collaboration and Support:

•  Facilitate communication between design and manufacturing teams to align processes.
• Establish a feedback loop with manufacturing engineers to optimize designs for manufacturability and to adjust design standards.
• Act as a point of contact for technical inquiries for the operations team.
• Facilitate communication and collaboration across multiple engineering and manufacturing sites to align expectations and processes.

Qualifications

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering or a related field, MSME is preferred.
•  10+ years of experience in R&D, product development, or a related field within the power distribution industry.
• Demonstrated track record of leading successful engineering projects and developing new technologies.
• Experience in medium voltage power distribution systems, including electrical, thermal, and mechanical considerations.
• Experience in leadership and mentoring and fostering a culture of innovation and continuous improvement.
• Experience working in a design-to-order or custom engineering environment is strongly preferred.
• Ability to manage multiple projects and prioritize tasks effectively in a fast-paced environment.
• Familiarity with low voltage switchgear, panelboards, utility systems, or the power industry is preferred.
• Proficiency in sheet metal design, including manufacturability and cost optimization.
• Strong attention to detail, analytical thinking, and problem-solving abilities.
•  Proficiency with SolidWorks, AutoCAD, or similar; CFD (Computer Fluid Dynamics) or Finite Element Analysis (FEA) experience is a plus.
• Knowledge of IEEE/ANSI C37.20.2, C37.04, C37.06, C37.09; CSA C22.2 No. 31-M89; EEMAC G8-3.2 design guidelines and NFPA70E are desirable.
• Strong communication skills, both written and verbal, with the ability to collaborate across teams.

Location

This position is available in multiple locations, including Franklin (TN), Tualatin (OR), OR Jacksonville (FL).

Position Summary

The Lead R&D Engineer is responsible for managing group engineers and leading the design and validation of new medium voltage power distribution products. This role includes performing and overseeing complex projects that require extensive 3D modeling and 2D drafting while ensuring design accuracy and alignment with project requirements. The Lead R&D Engineer facilitates the development of innovative products that meet industry standards, regulatory requirements, and customer needs while optimizing performance, manufacturability, and cost. Additionally, the Lead R&D Engineer directly manages engineers and collaborates with the Engineering Manager to proactively identify and address project and personnel challenges, ensuring successful outcomes.

Key Responsibilities

•  Lead the design, analysis, and validation of new medium voltage power distribution products, including metal clad and metal enclosed switchgear, and related components.
•  Responsible for managing and mentoring engineers and designers, providing career guidance, constructive feedback, tracking project timelines, and ensuring quality and efficiency in deliverables.
•  Working closely with the Engineering Manager to identify issues quickly and ensure they are addressed in an appropriate and timely manner.
• Driving group on time performance while minimizing design errors for NPI project deliverables.
•  Leading the development of mechanical designs to meet NPI project-specific requirements.
• Conducting peer reviews and providing constructive feedback to team engineers to improve design quality and ensure alignment with project goals.
• Mentoring and supervising group engineers and designers to foster team growth and ensure efficient workflow in a collaborative environment.

New Process Implementation (NPI):

• Ensure NPI projects comply with customer specifications, industry standards, manufacturability, and internal quality benchmarks.
• Track project metrics such as TTM, design errors, and revision cycles to areas for improvement with the engineering manager.

Technical Leadership and Mentorship:

•  Foster a culture of innovation and continuous improvement within the team.
• Provide guidance and mentorship to team members, promoting professional growth.
• Resolve team conflicts to maintain a productive working environment.
• Assist in training team members in best practices for 3D SolidWorks modeling, 2D AutoCAD drafting, and compliance with design standards.
•  Provide constructive feedback during peer reviews to improve the team's technical output.

Collaboration and Support:

•  Facilitate communication between design and manufacturing teams to align processes.
•  Establish a feedback loop with manufacturing engineers to optimize designs for manufacturability and to adjust design standards.
• Act as a point of contact for technical inquiries for the operations team.
•  Facilitate communication and collaboration across multiple engineering and manufacturing sites to align expectations and processes.

Qualifications

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering or a related field, MSME is preferred.
•  10+ years of experience in R&D, product development, or a related field within the power distribution industry.
• Demonstrated track record of leading successful engineering projects and developing new technologies.
• Experience in medium voltage power distribution systems, including electrical, thermal, and mechanical considerations.
• Experience in leadership and mentoring and fostering a culture of innovation and continuous improvement.
• Experience working in a design-to-order or custom engineering environment is strongly preferred.
• Ability to manage multiple projects and prioritize tasks effectively in a fast-paced environment.
• Familiarity with low voltage switchgear, panelboards, utility systems, or the power industry is preferred.
• Proficiency in sheet metal design, including manufacturability and cost optimization.
• Strong attention to detail, analytical thinking, and problem-solving abilities.
•  Proficiency with SolidWorks, AutoCAD, or similar; CFD (Computer Fluid Dynamics) or Finite Element Analysis (FEA) experience is a plus.
• Knowledge of IEEE/ANSI C37.20.2, C37.04, C37.06, C37.09; CSA C22.2 No. 31-M89; EEMAC G8-3.2 design guidelines and NFPA70E are desirable.
• Strong communication skills, both written and verbal, with the ability to collaborate across teams.

Location

This position is available in multiple locations, including Franklin (TN), Tualatin (OR), Jacksonville (FL).

Position Summary:

IEM is currently seeking a Manufacturing Engineer for our Jacksonville, FL location and will report into the Senior Manager of Manufacturing Engineering. We are seeking a hands-on and detail-oriented Manufacturing Engineer with experience working in a medium to high-mix volume manufacturing environment. This role is responsible for driving process improvements, implementing standard work, and leading continuous improvement initiatives using structured problem-solving and Kaizen methodologies. The ideal candidate thrives in a fast-paced, team-oriented setting and has a passion for lean manufacturing and operational excellence.

Key Responsibilities:            

• Design, optimize, and implement manufacturing processes to improve quality, efficiency, and safety.
• Lead and participate in Kaizen events, root cause problem solving (8D, A3, DMAIC), and continuous improvement projects.
• Develop and maintain standard work instructions for production processes.
• Use data-driven analysis (SPC, Pareto, time studies) to identify and resolve process bottlenecks or defects.
• Collaborate with cross-functional teams including Quality, Operations, and Supply Chain to introduce new products and process changes.
• Support equipment selection, process validation, and layout optimization for lean flow.
• Lead PFMEA, control plans, and risk assessments for manufacturing processes.
• Ensure processes comply with quality, safety, and environmental standards.
• Train and mentor operators and technicians on process changes and lean tools.

Qualifications:

• Bachelor's degree in Mechanical, Industrial, or Manufacturing Engineering (or related technical field).
• 3–7 years of experience in a manufacturing or process engineering role. Proven experience with Kaizen, standard work, time studies, line balancing, material flow, and structured problem-solving tools (A3, 5-Why, Fishbone, PDCA, etc.).
• Strong working knowledge of Lean Manufacturing and/or Six Sigma principles.
• Experience with ERP/MES systems, engineering change control, and work instruction platforms.
• Demonstrated career ambition with a track record of growth and increasing responsibility; highly promotable with the potential to take on broader leadership roles within a fast-paced, high-growth organization
• Proficient in Microsoft Office and engineering tools such as AutoCAD, SolidWorks, or equivalent.
• Strong interpersonal, facilitation, and communication skills.

Preferred Qualifications:

• Lean/Six Sigma certification (Green Belt or higher).
• Experience in electrical equipment, assembly-based, or industrial manufacturing environments.
• Familiarity with ISO 9001 or related quality management systems.

IEM is currently seeking a Manufacturing Engineer – Metal Fabrication (E2) to support the commissioning, implementation, and optimization of metal fabrication manufacturing processes within our rapidly expanding switchgear operations. This intermediate-level role involves independent execution of equipment launches, training development, and process optimization activities.

Please note: This position requires 100% onsite presence in our Jacksonville sites and does not offer remote work. 

KEY RESPONSIBILITIES

• Support installation, commissioning, and validation of metal fabrication equipment (CNC punching, press brakes, welding, powder coating, wire processing, and busbar equipment)
• Coordinate with equipment vendors during setup, FAT/SAT, and production ramp-up
• Assist with manufacturing cell layout, material flow, and facility readiness
• Support operator and maintenance training during equipment launch
• Develop, evaluate, and improve manufacturing methods, utilizing knowledge of product design, materials and parts, fabrication processes, tooling and production equipment capabilities, and quality control standards
• Apply lean manufacturing principles to improve safety, ergonomics, and process stability
• Implement and maintain OEE systems to track and improve machine efficiency
• Analyze incidents and quality issues, define and implement corrective actions
• Participate in automation initiatives by employing robotic manufacturing, material handling, and inspection.
• Implement preventative maintenance programs to reduce machine down times.
• Develop standard work, SOPs, and training materials for operators and technicians
• Collaborate with operations, quality, supply chain, facilities, and EHS teams
• Occasional travel to vendors or other IEM facilities as required

QUALIFICATIONS

Required:

• Bachelor’s degree in mechanical, manufacturing, or industrial engineering, or related technical field
• Must have knowledge of CNC machines, metal forming, fabrication processes, and their requirements.
• Minimum 3-year experience in a related manufacturing environment.
• Experience in 3D CAD/CAM Software (Solidworks preferred)
• Competency in GD&T required
• Strong communication skills and ability to work in an on-site production environment
• Excellent problem-solving skills and analytical thinking ability

Preferred:

• Exposure to equipment commissioning or production ramp-up
• Familiarity with Lean manufacturing tools (OEE, SPC, etc.)
• Experience working with CNC equipment OEMs such as Amada or similar
• Ability to manage multiple projects and assignments with high level of autonomy and accountability for results
• Knowledge of machinery design

We are seeking a Manufacturing Engineer - Early Career (E1) to support the commissioning, implementation, and optimization of metal fabrication manufacturing processes within our switchgear operations. This entry-level role focuses on supporting equipment commissioning, training, and early-stage process development under guidance from senior engineers.

Please note: This position requires 100% onsite presence in our Jacksonville sites and does not offer remote work. 

KEY RESPONSIBILITIES

• Support installation, commissioning, and validation of metal fabrication equipment (CNC punching, press brakes, welding, powder coating, wire processing, and busbar equipment)
• Coordinate with equipment vendors during setup, FAT/SAT, and production ramp-up
• Assist with manufacturing cell layout, material flow, and facility readiness
• Develop standard work, SOPs, and training materials for operators and technicians
• Support operator and maintenance training during equipment launch
• Analyze production data to identify opportunities for efficiency, quality, and throughput improvements
• Apply Lean manufacturing principles to improve safety, ergonomics, and process stability
• Collaborate with Operations, Quality, Supply Chain, Facilities, and EHS teams
• Support future equipment procurement, expansion, and optimization initiatives
• Occasional travel to vendors or other IEM facilities as required

QUALIFICATIONS

Required:

• Bachelor’s degree in mechanical, manufacturing, or industrial engineering, or related technical field
• Experience in a manufacturing or process engineering environment
• Experience in 3D CAD/CAM Software (Solidworks preferred)
• Strong communication skills and ability to work in an on-site production environment
• Excellent problem-solving skills and analytical thinking ability

Preferred:

• Experience with metal fabrication processes and equipment
• Exposure to equipment commissioning or production ramp-up
• Familiarity with Lean manufacturing tools

Experience working with CNC equipment OEMs such as Amada or similar

Position Summary

The Mechanical Engineer III in the Enterprise Engineering Division is responsible for executing and supporting the mechanical design, configuration, and documentation of low voltage products. This role works within established system architectures and engineering standards to develop custom and configured solutions that meet customer, manufacturing, and compliance requirements.

Key Responsibilities

• Execute and support the configuration and customization of mechanical designs to meet project- and customer-specific requirements.
• Provide maintenance of line (MOL) support for operational teams across the business
• Perform advanced 3D modeling and create detailed 2D drawings, including customer coordination drawings, fabrication drawings, and assembly documentation.
• Maintain and update bills of materials (BOMs), ensuring alignment with released designs and manufacturing standards.
• Collaborate with cross-functional teams, including project managers, R&D engineering, manufacturing, manufacturing engineers and quality, to ensure designs meet functional, schedule, and cost targets.
• Optimizing and configuring the custom designs of mechanical solutions to meet client-specific requirements, focusing on manufacturability and compliance with industry and internal standards.
• Reviewing designs to maintain accuracy, quality, and compliance with industry guidelines, and UL 891/1558.
• Incorporate manufacturing, testing, field, and installation feedback into design updates and product refinements.
• Contribute to peer reviews of designs to ensure high-quality deliverables and compliance with engineering standards.
• Assisting in identifying and addressing project challenges, ensuring alignment with timelines and client expectations.

Essential Functions

• Apply established system-level configuration strategies and modules that balance technical requirements, manufacturability, and cost-effectiveness.
• Translate product requirements into engineering system specifications and technical documentation
• Support prototyping, testing, validation, and product launches of system configurations
• Prepare high-quality documentation, including fabrication-level drawings and assembly instructions.
• Design and refine mechanical components and assemblies
• Identify and address discrepancies in BOMs promptly to minimize delays and errors during production.
• Analyze field and quality data to drive product improvements
• Contribute to workflow templating and automation initiatives to increase project throughput and reduce errors.
• Provide informal guidance and technical support to junior engineers and designers
• Share best practices related to 3D modeling, drafting standards, fabrication methods and documentation quality.
• Participate in peer reviews to improve overall team output and consistency.
• Work closely with the senior engineers, lead engineers, manufacturing engineers, quality engineers and fabrication teams to refine designs for manufacturability.
• Coordinate with internal stakeholders across engineering and manufacturing locations to support project execution.
• Communicate design intent, assumptions, and changes clearly to relevant teams.

Qualifications

• Experience working in a configure-to-order (CTO) or engineered-product environment preferred.
• Experience in manufacturing and other related cross functional engagement is an asset.
• Exposure to design-to-order or custom engineering environment is an asset.
• Ability to manage multiple projects and prioritize tasks effectively in a fast-paced environment
• Familiarity with low or medium voltage switchgear, utility systems, or the power industry is preferred.
• Proficiency in sheet metal design, including manufacturability and cost optimization.
• Strong attention to detail, analytical thinking, and problem-solving skills.
• Proficiency with SolidWorks, AutoCAD, or Pro E; Finite Element Analysis (FEA) experience is a plus.
• Knowledge of UL891/1558 design guidelines and NFPA70E are desirable.
• Strong communication skills, both written and verbal, with the ability to collaborate across teams.

Education & Experience

• BSME or equivalent required, MSME is preferred
• 7+ years of experience in mechanical design, preferably in CTO or system engineering.

Compensation

The salary range for this role is $91,200-$124,800 per year, based on location, experience, and qualifications.

Position Summary:

IEM is currently seeking a Manufacturing Engineer (Senior-level) for our Jacksonville, FL location and will report into the Senior Manager of Manufacturing Engineering. The Manufacturing Engineer (Senior-level) is a key technical leader responsible for driving strategic initiatives and delivering robust, scalable, and cost-effective manufacturing solutions. This role oversees the development, optimization, and support of advanced manufacturing processes, with a focus on operational excellence, automation, and continuous improvement. The Manufacturing Engineer (Senior-level) will lead cross-functional efforts to implement cutting-edge technologies, ensure regulatory compliance, and achieve world-class performance in quality, safety, and throughput. This position demands deep expertise in Lean, Six Sigma, process validation, and smart manufacturing systems, as well as strong leadership and mentoring capabilities.

Key Responsibilities:

• Lead the design, development, and deployment of advanced manufacturing processes and production systems across new and existing product lines.
• Drive automation and Industry 4.0 initiatives to enable smart, data-driven manufacturing and improve operational agility.
• Serve as the technical authority in cross-functional teams involving operations, quality, R&D, and supply chain to ensure product manufacturability, scalability, and cost-effectiveness.
• Facilitate and lead high-impact kaizen events, root cause investigations (RCA), and the implementation of corrective/preventive actions (CAPA).
• Develop and maintain comprehensive documentation including process flow diagrams, SOPs, work instructions, and training guides to ensure consistency and compliance.
• Optimize production line layouts, material flow, and takt time using Lean methodologies to increase efficiency and reduce waste.
• Own and drive continuous improvement of key performance indicators (KPIs) such as yield, cycle time, scrap rate, and OEE (Overall Equipment Effectiveness).
• Lead capital project initiatives including equipment selection, procurement, commissioning, and validation (IQ/OQ/PQ).
• Ensure all processes and equipment meet applicable safety, quality, and regulatory standards (e.g., ISO, UL, OSHA, FDA as applicable).
• Champion cost reduction strategies through design for manufacturability (DFM), value engineering, and process automation.
  
  Qualifications:
• Bachelor’s degree in Mechanical, Industrial, or Manufacturing Engineering; Master’s degree or advanced technical certifications (e.g., Lean Six Sigma Black Belt) strongly preferred.
• 7–10+ years of progressive experience in a manufacturing engineering role, ideally within high-volume or complex electromechanical production environments.
• Proven expertise in Lean Manufacturing, Six Sigma, Standard Work, process mapping, and statistical process control (SPC).
• Proficient with CAD software, ERP systems, and manufacturing execution systems (MES); experience with digital manufacturing tools and data analytics is a plus.
• Demonstrated hands-on experience with automation systems, robotics, PLCs, machine vision, or other Industry 4.0 technologies.
• Strong leadership, communication, and project management skills, with a track record of cross-functional collaboration and mentoring junior engineers.
• Demonstrated career ambition with a track record of growth and increasing responsibility; highly promotable with the potential to take on broader leadership roles within a fast-paced, high-growth organization
• Strategic thinker with a continuous improvement mindset and a passion for driving operational excellence.

Position Summary

The Senior Mechanical Engineer in the Enterprise Engineering Division is responsible for collaborating with product management, commercial, design, and manufacturing teams to develop and maintain a “system” approach to optimizing and establishing configurations within IEM’s low voltage power products. This role involves extensive 3D modeling and 2D drafting, creating and maintaining BOMs, coordination with internal stakeholders, and ensuring that configurations meet project specifications and industry standards. The Senior Engineer plays a critical role in mentoring junior engineers and collaborating with cross-functional teams to drive successful project delivery.

Key Responsibilities

• Mentoring and providing guidance to junior engineers and designers, fostering skill development within the team.
• Optimizing and configuring the custom designs of mechanical solutions to meet client-specific requirements, focusing on manufacturability and compliance with industry and internal standards.
• Performing advanced 3D modeling and creating detailed 2D drawings, including client coordination drawings and fabrication documentation.
• Collaborating with clients, project managers, and internal teams to ensure designs are aligned with project goals, customer specifications, and timelines.
• Reviewing designs to maintain accuracy, quality, and compliance with industry guidelines, and UL 891/1558.
• Incorporating feedback provided during manufacturing and installation phases to improve product features and ensure seamless execution.
• Conducting peer reviews of designs to ensure high-quality deliverables and compliance with engineering standards.
• Assisting in identifying and addressing project challenges, ensuring alignment with timelines and client expectations.

Essential Functions

• Develop system-level configuration strategies and modules that balance technical requirements, manufacturability, and cost-effectiveness.
• Translate product requirements into engineering system specifications and technical documentation
• Support prototyping, testing, validation, and product launches of system configurations
• Prepare high-quality documentation, including fabrication-level drawings and assembly instructions.
• Design and refine mechanical components and assemblies
• Identify and address discrepancies in BOMs promptly to minimize delays and errors during production.
• Analyze field and quality data to drive product improvements
• Drive workflow templating and automation initiatives to increase project throughput and reduce errors.
• Assist in training junior team members in best practices for 3D SolidWorks modeling, 2D AutoCAD drafting, and compliance with design standards.
• Lead peer reviews to improve the team's technical output.
• Partner with the Lead Engineer, manufacturing engineers, and fabrication teams to refine designs for manufacturability.
• Facilitate communication and collaboration across multiple engineering and manufacturing sites to align expectations and processes.

Qualifications

• Experience mentoring and guiding junior engineers preferred.
• Experience working in a configure-to-order engineering environment with a systems approach strongly preferred.
• Experience working in a design-to-order or custom engineering environment is an asset.
• Experience in manufacturing and other related cross functional engagement is an asset.
• Ability to manage multiple projects and prioritize tasks effectively in a fast-paced environment
• Familiarity with low or medium voltage switchgear, utility systems, or the power industry is preferred.
• Proficiency in sheet metal design, including manufacturability and cost optimization.
• Strong attention to detail, analytical thinking, and problem-solving skills.
• Proficiency with SolidWorks, AutoCAD, or Pro E; Finite Element Analysis (FEA) experience is a plus.
• Knowledge of UL891/1558 design guidelines and NFPA70E are desirable.
• Strong communication skills, both written and verbal, with the ability to collaborate across teams.

Education & Experience

• BSME or equivalent required, MSME is preferred
• 7+ years of experience in mechanical design, preferably in CTO or system engineering.

Compensation

The salary range for this role is $115,200-$174,720 per year, based on location, experience, and qualifications.

About IEM

Industrial Electric Mfg. (IEM) is the largest independent full-line manufacturer of custom power distribution systems in North America. Founded more than 75 years ago in Fremont, California, IEM grew alongside Silicon Valley and today operates over 1.7 million square feet of manufacturing capacity. With $1B+ in annual sales and 10,000+ commissioned projects across technology, data centers, commercial, energy, utilities, healthcare, industrial, and infrastructure markets, IEM continues to deliver exceptional product quality, dependable service, and the flexibility to meet complex technical requirements at scale.

Position Summary

The Switchgear Application Expert is the senior technical escalation point for complex pre‑sales and post‑sales inquiries related to IEM’s low- and medium-voltage switchgear, switchboards, panelboards, and related distribution products. The role provides Tier‑2 and Tier‑3 support across Pre‑Sales, Order Review, Engineering, Production, Field Services, Quality, Product Management, and Customer Support, ensuring that solutions are technically sound, compliant with codes/standards and UL procedures, and manufacturable at scale. The Application Expert combines deep protection & controls, three‑phase power, and standards knowledge with strong cross‑functional collaboration to de‑risk projects, resolve field issues, and drive continuous improvement.

Ideal Candidate Profile

• Seasoned application or engineer with strong power systems with OEM background and familiar with LV and MV distribution equipment who enjoys being the “go‑to” technical expert.
• Comfortable reviewing complex specifications, single‑line diagrams, CDEs, and relay schemes, and explaining trade‑offs to both technical and non‑technical stakeholders.
• Thrives in a fast‑paced environment balancing urgent escalations with long‑term improvements to standards, tools, and processes.

Key Responsibilities

1. App Expert / Cross‑functional Technical Leadership

• Serve as the primary Application Expert for complex and non‑standard applications of IEM switchgear and related products.
• Act as a technical liaison between Sales, Estimation, Engineering, Production, Field Services, Quality, and Product Management, ensuring consistent interpretation of standards, UL procedures, and IEM practices.
• Identify recurring technical issues and lead or support initiatives to improve standard designs, tools, and documentation.

1. Pre‑Sales Inquiries

• Support Estimation and Inside Sales by validating complex CDEs, custom enclosure footprints, and utility‑interface requirements against IEM standard offerings and UL procedures.
• Review IEM quotes and CDEs for alignment with customer specifications, codes, and IEM practices; provide clear technical clarifications and risk flags.
• Perform in‑depth technical reviews for projects with high technical P&C requirements, paralleling controls, unusual system topologies, or non‑standard configurations.
• Determine when proposed solutions fall outside standard UL procedures or IEM product offerings and coordinate with Development / R&D / Product Engineering to define acceptable alternatives or exceptions.

1. Product Team Support

• Provide structured feedback to Product Management and R&D based on trends in pre‑sales questions, production issues, and field events.
• Participate in product roadmap and design reviews as the “voice of application,” ensuring new offers are practical to apply, commission, and service.
• Support validation of new features or product lines through application testing, documentation review, and internal training for Sales, Engineering, and Field Services.

1. Production Support

• Review and advise on installation methods and minor drawing clarifications when production questions arise.
• Evaluate production/installation defects to determine whether material replacement or limited rework is required.
• Lead major technical reviews when production or QC identifies issues that may impact code compliance, UL procedure adherence, safety, or functionality.
• Confirm that electrical and mechanical designs meet applicable codes, standards, and IEM UL procedures; propose robust solutions that minimize shipment delays, rework, and added cost.
• Act as mediator between Engineering, Production, and QC on complex issues, driving clear decisions and documented resolutions.

1. Engineering Support

• Support design engineers with general design reviews and returned customer submittal comments; clarify specifications and ensure project requirements align with IEM standard practices and UL procedures.
• Confirm UR components are correctly selected and within applicable UL files.
• Own major technical reviews that require deeper analysis, research, and justification to meet challenging design or specification requirements.
• Provide expert guidance on power system configuration, protection & controls, and communication architectures for complex projects.

1. Order Review

• Review order entry and acknowledgment forms against the approved quote, CDE, specifications, and single‑line diagrams; identify discrepancies early and work with Engineering to define technical solutions.
• Collaborate with Engineering and Sales to review “show‑stopper” items identified during Tier‑2 review that cannot be resolved without customer buy‑in.
• Define technically sound alternatives, articulate risks and constraints, and support customer discussions as needed.

1. Customer Support (Post‑Sales)

• Address advanced customer questions on submittals, dimensional changes, and specification clarifications that are not yet formal service issues.
• Provide troubleshooting guidance on equipment based on drawings, settings, and documentation prior to Service engagement.
• Lead complex customer escalations involving design interpretation, protection & controls performance, or systemic issues.
• Participate in technical meetings and root‑cause discussions with key customers and internal stakeholders, ensuring a strong technical basis for decisions.

1. Field Services Support

• Provide diagnostic support for high‑profile site events (e.g., mis‑operations, major outages, arc‑flash incidents, or site stoppages).
• Analyze relay/event logs, test reports, and site conditions to identify root causes and recommend corrective and preventive actions.
• Assist in preparing in‑depth corrective action reports, including independent research and coordination with Engineering, Quality, and Product teams.

1. Quality Support

• Support QC teams on testing requirements, guidelines, and interpretation of standards and UL procedures.
• Complete assigned nonconformance investigations, including analysis of cause, risk, and preventive actions.
• Provide technical research and feedback on major quality events, including arc‑flash or site stoppage incidents, and translate findings into updates to standards, templates, or training.

Qualifications

• Bachelor’s degree in electrical engineering (BSEE) or equivalent technical experience.
• 5+ years of experience in application engineering, design engineering, or field service for low- and/or medium-voltage switchgear, switchboards, or related power distribution equipment.
• Strong knowledge of three‑phase power systems, protection and control schemes, and communication protocols commonly used in power systems.
• Solid understanding of applicable codes and standards (e.g., NEC, UL 891/1558/508A, IEEE/ANSI) and how they apply to IEM products and UL procedures.
• Proficiency in reading and interpreting single‑line diagrams, schematics, wiring diagrams, and mechanical assembly drawings; AutoCAD experience strongly preferred.
• Demonstrated ability to perform structured root‑cause analysis and to lead cross‑functional investigations.
• Strong written and verbal communication skills, with the ability to explain complex technical concepts to both technical and non‑technical stakeholders.
• Proven track record of managing multiple priorities in a fast‑paced, project‑driven environment.

Preferred

• Experience with power system analysis and protection coordination tools.
• Prior experience in a deep technical support, field service, or product engineering role for LV/MV equipment.
• Familiarity with data center, industrial, or utility applications where high reliability and availability are critical.

Workplace Conditions

• Onsite or remote role with primary collaboration with the Application Engineering team, Sales, Engineering, Production, Field Services, and Product Management.
• Occasional meetings with colleagues across time zones may require flexibility in working hours.
• Travel expectations: Minimal; may include periodic visits to manufacturing facilities, project sites, or customer locations for investigations or technical meetings.

Position Summary

The Vice President of Design Engineering will lead IEM’s Design-to-Order engineering organization, overseeing a growing team of electrical and mechanical engineers responsible for delivering customized switchgear solutions to exacting customer specifications. This executive role requires a strategic engineering leader with an operational mindset who can balance technical excellence and on-time delivery, while driving continuous improvement.

Key Responsibilities

• Provide strategic direction and leadership for the Design Engineering organization

• Oversee the execution of hundreds of concurrent customer projects

• Establish, monitor, and report key performance indicators related to on-time delivery and defect-free designs

• Transform engineering workflows from a custom one-off low-to-mid fidelity design to standardized, repeatable, high-fidelity customer solutions built on Configure-to-Order building blocks

• Partner closely with Manufacturing, Quality, Supply Chain, and Field Service to ensure designs are manufacturable, serviceable, scalable, and cost-effective

• Provide technical direction and oversight across multiple engineering disciplines

• Provide innovative client-centric solutions within the IEM product portfolio to meet specific customer applications

• Ensure designs comply with relevant industry standards, including IEEE/ANSI, UL, CSA, NEC, and IEC requirements

• Foster a best-in-class work environment to attract and maintain top talent in the organization

Qualifications

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or a related technical discipline required; Master’s degree or MBA preferred

• Minimum of 15 years of progressive engineering leadership experience in a Power Product Manufacturing Environment

• Proven track record leading large engineering organizations (100+ engineers) in design-to-order or engineer-to-order environments

• Deep understanding of electrical switchgear design, power distribution systems, and applicable industry standards

• Proven track record in modernizing engineering design methods/tools, and transforming an organization in a growth environment

• Demonstrated success in driving operational improvements, reducing design cycle times, and implementing engineering systems and tools. Experience with PLM, CAD, and engineering data management systems

Compensation

The salary range for this role is $250,000 – $305,000 per year, based on location, experience, and qualifications.

Work Arrangement
Onsite with occasional travel. Periods of development may require long irregular hours around deadlines, which can include weekends some holidays.

Job Overview
The Principal Aeromechanical Engineer is responsible for leading and overseeing the design, development, and testing of aeromechanical systems and components. They collaborate with cross-functional teams to ensure the successful integration of aerodynamic, mechanical, and structural elements in aircraft and spacecraft designs. They provide technical guidance and mentorship to junior engineers, contribute to project management activities, and stay updated on industry trends and advancements in aeromechanical engineering. 

Essential Functions
•    Lead the design and development of UAS products and subsystems.
•    Build and tests prototype systems to validate designs
•    Make decisions for design challenges and coordination with multidisciplinary engineering groups
•    Evaluate performance of all vehicle designs from initial concept to complete production-ready design
•    Conduct presentations (Formal and Informal) on designs.
•    Uses scientific and engineering principles to assess deficiencies in any given design and the impact of potential changes
•    Makes complex decisions to meet stated and derived requirements
•    Complete assigned tasks within the project schedule and budget
•    Provide guidance and mentorship to others in both their discipline and company values
•    Conduct FEA and CFD simulation analysis on aircraft and powerplants Design airframes and other aeromechanical parts
•    Act as an interface to customers as ideas are communicated

Standard Essential Functions
Regular and reliable attendance on a full time basis [or in accordance with posted schedule].
Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices.
Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications and Competencies
•    Demonstrated competence in Mechanical Engineering processes and design/analysis tools, solving Mechanics & Kinematics problems, solving             Thermodynamics problems
•    Experienced in successfully designing mil-y electronics products
•    Understanding of metallic, plastic, and composite material properties
•    Ability to solve basic structural dynamics problems
•    Proficiency in SolidWorks, Excel, Word, and PowerPoint is required
•    Understanding of industry design and documentation standards (GD&T, ASME, Change Control, etc.)
•    Experienced with designing machined parts, composite parts, injection molded parts, sheet metal parts, wire assemblies, and mechanical                       assemblies for low, medium, and high-volume manufacturing processes
•    Experienced with mechanical, lab, field, flight, and environmental testing
•    Understanding of engineering configuration management processes
•    Ability to work with high-level program requirements, organize, schedule, and delegate tasks to an engineering team
•    Ability to provide leadership to the team

Education / Certifications
•    Bachelor's Degree in Mechanical or Aerospace Engineering.
•    Master's Degree preferred.

Experience
•    Minimum of 10+ years of experience in a progressive technical capacity within an engineering organization

Physical Requirements
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is:

Frequently required to sit, and to reach to use computers and other office equipment

Security Clearance
•    Ability to obtain/maintain a Top Secret/SCI DoD clearance, U.S. Citizenship required.

Location: Cape Canaveral

We are seeking a highly experienced Principal Mission Operations Engineer with a focus on launch automation, vehicle systems, and launch day Concept of Operations (CONOPS) for our Nova launch vehicle. In this critical role, you will develop launch day automation systems, coordinate with engineering teams, and ensure a seamless transition from ground operations through launch, flight, and handoff to orbital or recovery operations. This role will be well served by someone who is an expert in software engineering AND aerospace propulsion systems including tanks and structures.

Key Responsibilities:

• Develop, implement, and refine automation systems to support real-time mission operations and streamline launch day processes.
• Own the Nova Vehicle CONOPS from launch pad evacuation through lift off.
• Build systems for and, on launch day, to monitor telemetry from the Nova launch vehicle and assess real-time launch commit criteria.
• Own the implementation of mission specific challenges like downrange vehicle telemetry, hardware change implementation and operations improvements.
• Work with Kent and Moses Lake teams to streamline integrated vehicle testing as a continuation into Launch Site processing and Launch Operations.
• Aggregate and synthesize engineering inputs from subject matter experts to enable and inform critical decision-making.
• Collaborate closely with the Vehicle Controller, advising on launch sequence adjustments and anomaly resolution when needed.
• Lead the monitoring of vehicle stages through the flight phase, coordinating smooth handoff to orbital operations or recovery teams.
• Drive the continuous improvement of launch day CONOPS to increase operational efficiency and mission success.

Qualifications:

• Bachelor’s or Master’s degree in Software Engineering, Mechanical Engineering, Aerospace Engineering, Electrical Engineering, or related field.
• 8+ years of experience in mission operations, launch systems, or a related aerospace field.
• Proven experience in vehicle automation, telemetry analysis, and operational command and control.
• Strong problem-solving skills, especially in high-stakes, real-time environments.
• Excellent communication skills to effectively interact with multidisciplinary teams and provide guidance under pressure.

Preferred Qualifications:

• Expertise in reusable launch systems.
• Familiarity with mission control software and systems integration.
• Experience in developing launch commit criteria and real-time response protocols

Benefits

• Equity – We know that our employees are the reason we succeed. To give everyone a stake in our future, we are pleased to offer equity in the form of stock options to all regular, full-time employees. 
• Comprehensive benefits program including subsidized medical, dental, and vision insurance 
• Company-paid life and disability insurance 
• 401(k) plan with employer match 
• 4 weeks’ Paid Time Off  
• Holidays – 10 days (including an end-of-year closure) 
• Paid Family/Parental Leave  
• On-site gym or monthly wellness stipend (depending on location) 

Compensation

Target Levels:

• Level 3 Range: $129,150 - $193,620
• Level 4 Range: $151,305 - $252,105
• Level 5 Range: $176,505 - $327,810

Our job posts are intentionally written to attract a wide variety of experience levels, and we make decisions about the right fit on a per-candidate basis. 

Your actual level and base salary will be decided based on your specific experience and skill level.

#LI-CA1

The UAS Chief Engineer provides technical leadership, strategic direction, and execution oversight for the design, development, integration, and sustainment of advanced additively manufacturing unmanned systems. This role is responsible for end-to-end system engineering across air, ground, maritime, and/or multi-domain unmanned platforms, ensuring mission effectiveness, survivability, cybersecurity resilience, and compliance with applicable defense standards and regulations. The Chief Engineer serves as the primary technical authority for their assigned platform or product area, guiding cross-functional engineering teams, aligning technical roadmaps with customer requirements, and ensuring delivery of high-performance, secure, and reliable systems within cost and schedule constraints. This position works closely with government stakeholders, program management, operations, and executive leadership.

Essential Functions

• Provide overall technical leadership for additive manufactured unmanned system development programs, from concept through deployment and sustainment.
• Serve as the technical authority for system architecture, design trade studies, integration strategies, and risk management.
• Research and drive advancements in designs centered around additive manufacturing of UAS across the portfolio
• Lead system engineering processes including requirements development, decomposition, verification, validation, and configuration management.
• Oversee multidisciplinary engineering teams (mechanical, electrical, software, controls, AI/ML, autonomy, communications, cybersecurity, and systems engineering).
• Develop and maintain technical roadmaps aligned with defense customer needs and emerging operational requirements.
• Ensure compliance with applicable DoD standards, MIL-STDs, airworthiness/safety certifications, cybersecurity frameworks (e.g., RMF), and export regulations (e.g., ITAR/EAR).
• Direct integration of autonomy, navigation, sensors, communications, propulsion, and payload systems into cohesive, mission-ready platforms.
• Lead major technical reviews (SRR, PDR, CDR, TRR, PRR), ensuring readiness and program maturity at each phase.
• Identify, assess, and mitigate technical risks related to reliability, survivability, resilience, and mission performance.
• Support proposal development, customer briefings, and technical strategy discussions with government and defense partners.
• Foster innovation in autonomy, AI-enabled decision-making, resilient communications, and human-machine teaming.
• Mentor senior engineering staff and establish best practices in additive manufacturing, systems engineering, and product development.
• Perform other duties as assigned.

Standard Essential Functions

• Regular and reliable attendance on a full time basis [or in accordance with posted schedule].
• Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices.
• Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications and Competencies

• Security Clearance-Ability to obtain/maintain a Top Secret/SCI DoD clearance, U.S. Citizenship required.
• Demonstrated expertise in complex systems engineering for unmanned or autonomous defense systems.
• Extensive knowledge in additive manufacturing of UAS systems; composites, polymers, metals.
• Strong working knowledge of DfX principles; Design for Manufacturability, Procurement, Testability, Modularity, Cost.
• Strong knowledge of platform integration across hardware, embedded systems, software, autonomy, and communications.
• Proven ability to lead large, multidisciplinary technical teams in a regulated defense environment.
• Deep understanding of systems architecture, model-based systems engineering (MBSE), and lifecycle management.
• Familiarity with defense acquisition processes and government contracting environments.
• Working knowledge of cybersecurity requirements for defense systems, including secure communications and resilient architectures.
• Exceptional analytical, problem-solving, and decision-making skills.
• Strong written and verbal communication skills, with experience presenting to senior defense stakeholders.
• Understand of supply chain as it relates to autonomous systems development, rapid production scaling and design for manufacturing.

Education / Certifications

• Bachelor’s degree in Aerospace Engineering, Electrical Engineering, Mechanical Engineering, Systems Engineering, Computer Engineering, or a related technical field required.
• Master’s degree in Engineering, Systems Engineering, Robotics, Computer Science, or related field preferred.

Experience

• 15+ years of progressive engineering experience in defense, aerospace, robotics, or autonomous systems development.
• 10+ years of experience with progressive technical experience in engineering roles, with a proven track record of technical design and development
• 7+ years in senior technical leadership roles (e.g., Lead Engineer, Chief Engineer, Technical Director, or equivalent).
• 7+ years in senior technical engineering roles centered around additive manufacturing principles, programs, and execution
• Demonstrated experience leading at least one full lifecycle unmanned or autonomous system development program.
• Experience interfacing directly with DoD customers, prime contractors, and/or government program offices.
• Background in integrating sensors, navigation systems, propulsion systems, C2 systems, autonomy software, or mission payloads into operational platforms.
• Experience with test and evaluation planning, field demonstrations, and operational deployment support.
• Experience with manufacturing technologies that enable rapid development, test and demonstration of capabilities.
• Experience with safety-critical systems and applicable certification standards.

Physical Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: Frequently required to sit, and to reach to use computers and other office equipment For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time.

About the Role

As a Robotics Hardware Engineer at Applied Intuition, you will serve as the primary technical link between hardware design, GNC, and software teams to deliver integrated, flight-ready systems. You will lead the critical hardware-software bring-up process, driving initial validation of flight systems from the bench to the airfield while defining seamless communication interfaces across flight controllers and ground stations. In this role, you will architect repeatable verification workflows and high-fidelity simulation environments, including Hardware-in-the-Loop (HIL) and Software-in-the-Loop (SIL), to enable rapid iteration and reduce development cycle times. By setting standards for hardware abstraction and building custom real-time monitoring tools, you will ensure the delivery of robust, scalable, and maintainable flight software for next-generation autonomous machines

At Applied Intuition, you will:

• Lead the hardware-software bring-up process, driving initial integration and validation of flight systems from the bench to the airfield.
• Deliver integrated, flight-ready systems by bridging the gap between autopilot firmware, onboard compute, and peripheral vehicle hardware.
• Define and control system interfaces across flight controllers, payloads, and ground stations to ensure seamless communication and data integrity.
• Make critical system-level tradeoffs between embedded software performance, autonomy requirements, and physical hardware constraints.
• Design and scale automated test frameworks, including high-fidelity Hardware-in-the-Loop (HIL) and Software-in-the-Loop (SIL) environments with realistic sensor and vehicle simulation.
• Architect repeatable verification workflows that enable rapid iteration and reduce the cycle time from code change to validated flight behavior.
• Build custom tooling for real-time monitoring and post-flight analysis to convert complex test data into actionable system improvements.
• Serve as the technical authority for integration and verification, acting as the primary link between hardware design, GNC, and software teams.
• Support flight test campaigns as a hands-on technical lead, troubleshooting integration issues and ensuring mission success.
• Set the standards for design patterns and hardware abstraction to ensure robust, scalable, and maintainable flight software.

We're looking for someone who has:

• Degree: Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related technical field.
• 5+ years of experience in robotics hardware integration, embedded systems, or aerospace engineering.
• Deep expertise in vehicle electronics integration, specifically bridging autopilot firmware (e.g., PX4, ArduPilot) with onboard compute (e.g., NVIDIA Jetson, Raspberry Pi) and peripheral sensors.
• Strong proficiency in C++ and Python, with experience writing hardware abstraction layers or drivers for real-time systems.
• Hands-on experience with communication protocols such as CAN, UART, I2C, SPI, and MAVLink.
• Proven track record of building and scaling simulation environments, specifically Hardware-in-the-Loop (HIL) testing for autonomous vehicles or drones.
• Demonstrated ability to lead system-level bring-up, moving complex robotics platforms from initial bench-top prototyping to successful field or flight operations.
• Excellent troubleshooting skills and a collaborative mindset, with the ability to act as the technical "glue" between GNC, software, and mechanical teams.

Security Requirements:

• Must be a U.S. Citizen
• Must hold or be eligible for a U.S. Secret security clearance

For more information about U.S. security clearances: click here.

Nice to have:

• • FAA Part 107 Remote Pilot Certificate.
  • Hands-on experience with R/C systems, drone assembly, or flight operations.

Compensation at Applied Intuition for eligible roles includes base salary, equity, and benefits. Base salary is a single component of the total compensation package, which may also include equity in the form of options and/or restricted stock units, comprehensive health, dental, vision, life and disability insurance coverage, 401k retirement benefits with employer match, learning and wellness stipends, and paid time off. Note that benefits are subject to change and may vary based on jurisdiction of employment.

Applied Intuition pay ranges reflect the minimum and maximum intended target base salary for new hire salaries for the position. The actual base salary offered to a successful candidate will additionally be influenced by a variety of factors including experience, credentials & certifications, educational attainment, skill level requirements, interview performance, and the level and scope of the position.

Please reference the job posting subtitle for where this position will be located. For pay transparency purposes, the base salary range for this full-time position in the location listed is: $100,000 to $150,000 USD annually.

About the Team:  

The Launch team operates at the intersection of every major aspect of Terran R, from stages and payloads to ground systems, launch, landing, and refurbishment. The Cape is the only place where you see it all come together, offering a level of exposure and responsibility unmatched elsewhere in the program. This is where first flights happen, where history is built on top of history, and where the scale of what's underway is unlike anything in modern aerospace. The mission stays the same, but the work evolves with every milestone: from first launch to reuse, high-cadence operations, and beyond. If you're looking to define what's next in space launch and write a new playbook, not just repeat what’s already been done, this is where it happens.

About the Role: 

• Responsible for the design, fabrication, operation, and maintenance of the launch pad and support facilities for Terran R
• Design launch pad propellant and gas infrastructure, to include fluid system design, modeling, pipe stress analysis, fabrication drawings, process and instrumentation diagrams, component lists, and detailed work instructions
• Supervise the construction activation & commissioning, and initial operations of these facilities
• Solve technically challenging problems across a variety of disciplines under varying programmatic pressures

About You:  

• Bachelor's degree in mechanical engineering, aerospace engineering, or a related field and minimum 2 years of combined engineering experience is required
• Experience in thermal and fluid analyses
• General experience with fluid components such as valves, regulators, and instrumentation

Nice to haves but not required:  

• Experience safely operating complex fluid systems, including high pressure gas, cryogenic fluids, flammable liquids and gases, and hydraulics
• General knowledge of launch vehicle ground support equipment and operations, including cryogenic tanks, pumps, valves, instrumentation, or related experience
• Fundamental understanding with ANSYS and other piping analysis software (Caesar, Bentley Autopipe, etc.)
• Experience Working with DOD, USAF, and NASA personnel
• Able to work in high pressure environments and meet aggressive deadlines
• Demonstrated problem solving and critical thinking skills as well as demonstrated customer service excellence and ability to communicate highly effectively in verbal/written form with internal and external customers

Successful candidates must clear a background check administered by the US government to obtain clearance for on-site work at our government partner location in Cape Canaveral, Florida.

About the Team:

The Launch team operates at the intersection of every major aspect of Terran R, from stages and payloads to ground systems, launch, landing, and refurbishment. The Cape is the only place where you see it all come together, offering a level of exposure and responsibility unmatched elsewhere in the program. This is where first flights happen, where history is built on top of history, and where the scale of what's underway is unlike anything in modern aerospace. The mission stays the same, but the work evolves with every milestone: from first launch tor use, high-cadence operations, and beyond. If you're looking to define what's next in space launch and write anew playbook, not just repeat what’s already been done, this is where it happens. 

About the Role:

As a Staff Launch Mechanical Engineer, you will serve as the technical lead and systems architect for launch and ground support hardware supporting Terran R operations. This role is focused on defining system architecture, evaluating design requests, ensuring requirements are met, understanding operational concepts, and resolving complex integration challenges before they impact hardware, schedule, or launch readiness. You will work across vehicle, launch, manufacturing, test, and ground systems teams to translate high-level mission and operational needs into practical, manufacturable concepts. Rather than owning every detailed design activity directly, you will guide technical direction, perform design and manufacturability reviews, create preliminary concepts, and help teams make sound engineering decisions. This role also includes significant involvement in build, integration, and launch execution. You will work closely with engineering, manufacturing, and operations teams to resolve issues in real time, coordinate integration activities, and lead the technical response to unexpected challenges during hardware installation, testing, and launch preparation.

Essential Duties and Responsibilities:

• Lead system architecture and technical direction for launch and ground support hardware, ensuring requirements, interfaces, safety, and concept of operations are fully understood before design begins.
• Create preliminary concepts and conduct design and manufacturability reviews to guide engineering teams toward practical, buildable solutions.
• Coordinate across vehicle, launch, manufacturing, test, and ground systems teams to resolve technical issues and keep work aligned with schedule and operational needs.
• Define manufacturing, integration, and test strategies, partnering closely with technicians and operations teams to support successful build and launch execution.
• Lead troubleshooting and root cause investigations during hardware installation, integration, and launch preparation, making timely technical decisions in a fast-paced environment. 

About You:

• Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, Manufacturing Engineering, or a related field.
• 10+ years of engineering experience in mechanical, structural, manufacturing, launch, test, or ground support systems.
• Experience serving as a technical lead, systems architect, or integration lead for complex engineering programs.
• Strong ability to define requirements, understand concept of operations, and guide cross-functional teams through design and integration challenges.
• Experience leading design reviews, manufacturability reviews, and technical decision-making across multiple engineering disciplines.

Nice to haves but not required:

• Experience supporting launch site operations, hardware integration, refurbishment, or test activities in an aerospace environment.
• Familiarity with structural, fluid, or ground support systems, including high-pressure gas, cryogenic, hydraulic, or launch interface hardware.
• Experience with NASA, Department of Defense, Space Force, or other aerospace industry standards.

Successful candidates must clear a background check administered by the US government to obtain clearance for on-site work at our government partner location in Cape Canaveral, Florida.

About the Team:

The Launch team operates at the intersection of every major aspect of Terran R, from stages and payloads to ground systems, launch, landing, and refurbishment. The Cape is the only place where you see it all come together, offering a level of exposure and responsibility unmatched elsewhere in the program. This is where first flights happen, where history is built on top of history, and where the scale of what's underway is unlike anything in modern aerospace. The mission stays the same, but the work evolves with every milestone: from first launch to reuse, high-cadence operations, and beyond. If you're looking to define what's next in space launch and write a new playbook, not just repeat what’s already been done, this is where it happens.

About the Role:

In this role, you will work closely with Test and Launch design engineers to evaluate and implement optimal manufacturing and integration solutions. You will lead fabrication and integration efforts, including coordination with third-party vendors and full ownership of integration processes. You’ll collaborate with cross-functional teams—including fluids, civil, electrical, and mechanical disciplines—to develop effective integration strategies. You'll also be responsible for selecting techniques and processes that meet design tolerances, while providing input on and approving designs for manufacturability.

About You:

• Bachelor’s degree in Engineering (Manufacturing, Mechanical, Aerospace, or related discipline) or equivalent combination of education and relevant experience
• 5+ years of experience manufacturing with a focus on structural builds, precision tooling, or ground support equipment
• Experience with CAD (NX, Creo, Solidworks, CATIA)
• Experience with partial or full life-cycle ownership of small to large structural build projects including lifting and rigging, integration, and proof testing
• Experience or working knowledge of in-field fabrication techniques including welding, line boring, match drilling, milling operations and metrology required to achieve tight tolerance with structural systems
• Excellent problem solving and critical thinking skills

Nice to haves but not required:

• 7+ years of experience in a partial or full cycle design engineering role
• Experience working with AFSPCMAN 91-710
• Experience Working with DOD, USAF, and NASA
• Experience with large steel/aluminum structures
• Experience with mechanical systems and mechanisms
• Experience checking drawings and reviewing GD&T

Successful candidates must clear a background check administered by the US government to obtain clearance for on-site work at our government partner location in Cape Canaveral, Florida.

About the Team:

The Launch team operates at the intersection of every major aspect of Terran R, from stages and payloads to ground systems, launch, landing, and refurbishment. The Cape is the only place where you see it all come together, offering a level of exposure and responsibility unmatched elsewhere in the program. This is where first flights happen, where history is built on top of history, and where the scale of what's underway is unlike anything in modern aerospace. The mission stays the same, but the work evolves with every milestone: from first launch to reuse, high-cadence operations, and beyond. If you're looking to define what's next in space launch and write a new playbook, not just repeat what’s already been done, this is where it happens.

About the Role:

We are seeking a highly motivated and hands-on Launch Fluids Ground Support Equipment Integration and Build Engineer to be the critical bridge between our world-class engineering designs and the final, operational launch facility. You will be the technical authority on site, ensuring that the ground support equipment (GSE) is realized exactly to the design intent, on schedule, and operationally ready. If you thrive on solving problems in real-time and driving complex build programs from paper to reality, this role is for you.

• Design-to-build translation
• On-site technical authority
• Stakeholder interface
• Procedure generation & activation
• System uptime and operational readiness
• As-built documentation
• Perform any other additional responsibilities necessary to accomplish the mission

 About You:

• Bachelor's degree in mechanical engineering, aerospace engineering, or a related field and minimum 4 years of combined engineering experience
• Demonstrated ability to take ownership of work assignments and drive tasks through completion
• Ability to evaluate detailed information within the context of overall system and program requirements
• Ability to clearly communicate technical and non-technical information to a variety of audiences
• Ability to adapt to changing priorities and work requirements

Nice to haves but not required:

• Experience building and operating complex fluid systems, including high pressure gas, cryogenic fluids, flammable liquids and gases, hydraulics, and big water systems
• General knowledge of launch vehicle ground support equipment and operations, including cryogenic tanks, pumps, valves, instrumentation, or related experience
• Fundamental understanding with AFT Arrow/Fathom, Valcor, and other piping analysis software (Caesar, Bentley Autopipe, etc.)
• Experience Working with DOD, USAF, and NASA personnel
• Demonstrated problem solving and critical thinking skills as well as demonstrated customer service excellence and ability to communicate highly effectively in verbal/written form with internal and external customers

Successful candidates must clear a background check administered by the US government to obtain clearance for on-site work at our government partner location in Cape Canaveral, Florida.

About the Team: 

The Launch team operates at the intersection of every major aspect of Terran R, from stages and payloads to ground systems, launch, landing, and refurbishment. The Cape is the only place where you see it all come together, offering a level of exposure and responsibility unmatched elsewhere in the program. This is where first flights happen, where history is built on top of history, and where the scale of what's underway is unlike anything in modern aerospace. The mission stays the same, but the work evolves with every milestone: from first launch to reuse, high-cadence operations, and beyond. If you're looking to define what's next in space launch and write a new playbook, not just repeat what’s already been done, this is where it happens.

 About the Role: 

• Responsible for designing, fabricating, operating, and maintaining Terran R's launch pad and support facilities
• Design launch pad propellant and gas infrastructure, including fluid system design, modeling, pipe stress analysis, fabrication drawings, process and instrumentation diagrams, component lists, and detailed work instructions 
• Supervise the construction activation & commissioning and initial operations of these facilities
• Solve technically challenging problems across a variety of disciplines under varying programmatic pressures

About You:

• A bachelor's degree in mechanical engineering, aerospace engineering, or a related field and a minimum of four years of combined engineering experience are required
• Demonstrated engineering fundamentals in thermal and fluid analyses
• Working knowledge of fluid components such as valves, regulators, and instrumentation

Nice to haves, but not required: 

• Demonstrated ability to work in high-pressure environments and meet aggressive deadlines
• Demonstrated problem-solving and critical-thinking skills
• Experience safely operating complex fluid systems, including high-pressure gas, cryogenic fluids, flammable liquids and gases, and hydraulics
• In-depth knowledge of launch vehicle ground support equipment and operations, including cryogenic tanks, pumps, valves, and instrumentation, or related experience
• Demonstrated proficiency with ANSYS and other piping analysis software (Caesar, Bentley Autopipe, etc.) 
• Experience Working with DOD, USAF, and NASA personnel 
• Demonstrated customer service excellence and the ability to communicate clearly and effectively with internal and external teams

Successful candidates must clear a background check administered by the US government to obtain clearance for on-site work at our government partner location in Cape Canaveral, Florida.

About the Team:

The Launch team operates at the intersection of every major aspect of Terran R, from stages and payloads to ground systems, launch, landing, and refurbishment. The Cape is the only place where you see it all come together, offering a level of exposure and responsibility unmatched elsewhere in the program. This is where first flights happen, where history is built on top of history, and where the scale of what's underway is unlike anything in modern aerospace. The mission stays the same, but the work evolves with every milestone: from first launch to reuse, high-cadence operations, and beyond. If you're looking to define what's next in space launch and write a new playbook, not just repeat what’s already been done, this is where it happens.

About the Role:

As a Senior Infrastructure Engineer, you connect various internal technical teams to define architectural, structural, heavy civil, electrical, mechanical, plumbing, fire protection, & industrial requirements and will be our owner’s representative to outside facing consultants and contractors. You will work closely with other test & launch team members including infrastructure, fluids, electrical, command & control, mechanical, and support Test Operations during test processing and operations.

You will be responsible for managing the development, design, and construction of new infrastructure projects and will be responsible for the development of construction drawings, request for proposals, competitive bidding, bid evaluations, sub-contractor selections, sub-contractor management, and construction management. You will plan and execute the work to install and operate best-in-class test site solutions to meet stringent cost and schedule requirements in a very competitive environment.

About You:

As a member of the Infrastructure team at Relativity, you will be at the forefront of creating world class launch sites. You enjoy working with teams and are able to work autonomously to ensure project completion. You have a strong background in field engineering, construction engineering, and project management, and you have a passion for taking ideas and designs and making them become a reality in the built environment. You are a learner and doer at heart, who continuously engages across technical and operations teams to achieve amazing outcomes. You are willing to travel up 25% to support ongoing design, construction, testing, and operations across Relativity’s sites

• Bachelor’s degree in civil engineering, structural engineering, or related technical discipline
• 5 years of experience working in the aerospace or construction industry with a mix of hands-on field experience and project management experience
• Experience with design documentation, construction drawings, construction bid solicitation, contractor selection, construction management, field supervision, permitting, QA/QC, and Safety
• Experience with project scoping, budgeting, scheduling from both a day-to-day perspective as well as overall construction management
• Experience with Architectural, Structural, Civil, and MEPF design, construction, and operation
• Understanding of standard construction procedures, best practices, means & methods
• Ability to work within 3D models utilizing NX, AutoCAD or similar CAD programs
• Ability to travel up to 50%

Nice to haves but not required:

• Experience with development, permitting, land use controls, conditional use permits, and working with local government agencies
• Demonstrated customer service excellence and ability to communicate highly effectively in verbal/written form with internal and external customers
• Must have strong interpersonal skills and ability to work in a team environment
• Experience with direct responsibility driving projects forward while managing and reporting progress to remote management
• High organizational skills in managing multiple projects simultaneously
• Ability to design and understand precision technical plans, blueprints, drawings and modeling applications
• Ability to perform and manage technically complex projects using independent judgment and personal initiative
• Recognize and act on opportunities; maintain flexibility to adjust as requirements and priorities shift or constraints change and anticipate them when possible
• Ability to work in dynamic environments to execute real-time tasks in tight operation windows
• Licensed Professional Engineer (P.E.)
• Advanced degree or training in engineering, construction, operations, or project management
• Experience with facilities and systems within the aerospace industry
• Experience designing, building, or operating test or launch GSE within the aerospace industry
• Experience with FEM structural analysis
• Familiar with aerospace planning, procedures and operations, and safety (including LOTO)
• Experience working with state and federal government agencies

Successful candidates must clear a background check administered by the US government to obtain clearance for on-site work at our government partner location in Cape Canaveral, Florida.

Security Clearance
•    Active Top Secret DoD clearance preferred, U.S. Citizenship required.

Work Arrangement
Onsite with occasional travel.

Job Overview
Sr. Aeromechanical Engineers work to solve the nation's hardest problems through rapidly deployed technology solutions. Are you an aerospace or mechanical engineer stuck in a narrow job? Do you want to rapidly build autonomous systems aligned with your hobbies and interests? This job is a lead aeromechanical engineer that takes napkin sketches of airplanes and robots to final production. We work with small teams to move fast and make fielded systems. Here you will lead a small agile team to make these systems a reality from napkin sketch to 1.0 prototype.

Essential Functions
•    Senior role within the engineering team that helps lead in the design and development of UAS products and subsystems.
•    Opportunity to build and tests prototype systems to validate designs
•    Have decision-making abilities for design challenges and coordination with multidisciplinary engineering groups
•    Performance of all vehicle designs from initial concept to complete production-ready design
•    Conduct presentations (Formal and Informal) on designs.
•    Uses scientific and engineering principles to assess deficiencies in any given design and the impact of potential changes
•    Makes complex decisions to meet stated and derived requirements
•    Complete assigned tasks within the project schedule and budget
•    Provide guidance and mentorship to others in both their discipline and company values
•    Conduct FEA and CFD simulation analysis on aircraft and powerplants Design airframes and other aeromechanical parts
•    Act as an interface to customers as ideas are communicated
•    Travel as required

Standard Essential Functions

Regular and reliable attendance on a full-time basis [or in accordance with posted schedule].
Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices. Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications and Competencies
•    Demonstrated competence in Mechanical Engineering processes and design/analysis tools, solving Mechanics & Kinematics problems, solving Thermodynamics problems
•    Experienced in successfully designing mil-y electronics products
•    Demonstrated understanding of metallic, plastic, and composite material properties
•    Demonstrated ability to solve basic structural dynamics problems
•    Proficiency in SolidWorks, Excel, Word, and PowerPoint is required
•    Demonstrated understanding of industry design and documentation standards (GD&T, ASME, Change Control, etc.)
•    Experienced with designing: machined parts, composite parts, injection molded parts, sheet metal parts, wire assemblies, and mechanical assemblies for low, medium, and high-volume                             manufacturing processes
•    Experienced with: mechanical, lab, field, flight, and environmental testing
•    Demonstrated understanding of engineering configuration management processes
•    Demonstrated ability to work with high-level program requirements, organize, schedule, and delegate tasks to an engineering team
•    Demonstrated leadership experience
•    Periods of development may require long irregular hours around deadlines, weekends, and some holidays and in-field test environments

Education / Certifications
•    Bachelor's Degree in Mechanical or Aerospace Engineering

Experience
•    Minimum of 8+ years of experience in a progressive technical capacity within an engineering organization

Physical Requirements
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties the employee is:
Frequently required to sit, and to reach to use computers and other office equipment

Part Time candidates are welcome to apply! 

Shift:

Saturday - Sunday 12:00 pm - 6:00 pm

Pay: $16/hr 

All applicants should have reliable transportation to the warehouse located on Pennsylvania Ave, Sarasota, FL

Are you the person your friends call when something needs to be fixed or repaired? Do you enjoy being hands-on and solving mechanical issues? Are you interested in working in the growing EV shared micromobility industry? If so, you might be the perfect fit for Veo’s Repair Technician!

At Veo, we're bringing the next generation of mobility sharing to cities and universities globally through electric bikes and scooters. We design and engineer our own vehicles, hardware, and software systems to provide a greener, healthier mode of transportation, making the communities we serve more sustainable and livable. We're looking for exceptionally talented individuals who are ready to take on exciting challenges and own creative solutions.

Job Summary:

Veo is seeking repair technicians to maintain and repair our electric vehicle fleet. This role is ideal for mechanically-inclined professionals who enjoy solving problems, are comfortable working with their hands, and are passionate in helping make our communities safe and sustainable. No electric vehicle experience required but experience (professional or hobby) repairing bikes, scooters, cars, or motorcycles are a great fit.

Responsibilities:

• Perform comprehensive repairs on Veo’s electric bikes/scooters from tightening a bolt to replacing a motor 
• Conduct quality checks and routine inspection to ensure all vehicles meet our safety standards
• Follow processes to log and track maintenance record
• Track inventory levels for spare parts on an ongoing basis
• Maintain excellent warehouse organization and set example for teammates
• Perform field tasks as needed such as: swapping batteries and redistribution
• Other duties as assigned

Qualifications & Skills:

• At least 1+ years of experience in maintenance/ auto repair
• Ability to lift, carry, push and pull electric bikes/scooters weighing up to 80 lbs
• Problem-solving mindset and self-motivated
• Comfortable with navigating and using smartphone apps
• Strong communication and interpersonal skills; must be a team player!

Nice to have:

• Previous maintenance experience in bikes, scooters, motorcycles, or automotives
• Basic knowledge in electronics

Perks:

• Full-time employees are eligible for: Medical / Dental / Vision coverage, PTO
• Opportunity to help make the community safe and sustainable
• Free Veo credits!
• Flexible work hours

#VEO2026

We are seeking an experienced Launch Engineer - Vehicle Controller with a focus on launch automation, launch vehicle systems, and software for our Nova launch vehicle. In this critical role, you will develop launch day concept of operations, automation systems, coordinate with engineering teams, and ensure a seamless transition from ground operations through launch, flight, and handoff to orbital or recovery operations. This role will be well served by someone who is an expert in software engineering AND aerospace propulsion systems including tanks and structures.

Key Responsibilities:

• Develop, implement, and refine automation and software to support test and mission operations and streamline test and launch day processes.
• Work closely with Vehicle RE’s to ensure that software is enabling test and launch operations for the integrated vehicle.
• Operate and build systems that monitor telemetry from the Nova launch vehicle and assess real-time launch commit criteria.
• Work with Kent, Moses Lake and Launch Site teams to streamline integrated vehicle testing as a continuation into Launch Site processing and Launch Operations.
• Aggregate and synthesize engineering inputs from subject matter experts to enable and inform critical decision-making.
• Collaborate closely with Mission Operations Engineering, advising on launch sequence adjustments and anomaly resolution when needed.
• Drive the continuous improvement of launch day CONOPS to increase operational efficiency and mission success.

Qualifications:

• Bachelor’s or Master’s degree in Software Engineering, Aerospace Engineering, Electrical Engineering, or related field; advanced degree preferred.
• Minimum 5+ years of experience in mission operations, launch systems, or a related aerospace field.
• Experience in vehicle automation, telemetry analysis, and operational command and control.
• Experience operating and troubleshooting high pressure fluid systems or cryogenic systems
• Experience operating and troubleshooting mechanical/electrical or avionics systems
• Strong problem-solving skills, especially in high-stakes, real-time environments.
• Excellent communication skills to effectively interact with multidisciplinary teams and provide guidance under pressure.

Preferred Qualifications:

• 10+ Years experience in mission operations, launch systems, or a related aerospace field.
• Expertise in reusable launch systems.
• Familiarity with mission control software and systems integration.
• Experience in developing launch commit criteria and real-time response protocols

Benefits

• Equity – We know that our employees are the reason we succeed. To give everyone a stake in our future, we are pleased to offer equity in the form of stock options to all regular, full-time employees. 
• Comprehensive benefits program including subsidized medical, dental, and vision insurance 
• Company-paid life and disability insurance 
• 401(k) plan with employer match 
• 4 weeks’ Paid Time Off  
• Holidays – 10 days (including an end-of-year closure) 
• Paid Family/Parental Leave  
• On-site gym or monthly wellness stipend (depending on location) 

Compensation

Target Levels:

• Level 3 range: $123,000 - $184,400
• Level 4 range: $144,100 - $240,100
• Level 5 range: $168,100 - $312,200

Our job posts are intentionally written to attract a wide variety of experience levels, and we make decisions about the right fit on a per-candidate basis. 

Your actual level and base salary will be decided based on your specific experience and skill level.

We're looking for a Mechanical Engineer V/VI for Unmanned Aircraft Systems (UAS) which is a senior-level role responsible for leading the design, development, and implementation of advanced mechanical systems for UAVs. This position involves strategic oversight, innovative problem-solving, and mentorship of junior engineers. Engineers in this role will contribute to cutting-edge advancements in UAS technologies, driving innovation in areas such as autonomous systems, additive manufacturing, and aerospace materials.

Key Responsibilities:

• Strategic Design Leadership: Lead the design of complex mechanical systems for UAVs, including advanced airframes, propulsion systems, and payload integration.

• Advanced Prototyping and Testing: Oversee the development and testing of UAV prototypes, ensuring compliance with performance and reliability goals.

• Comprehensive Structural Analysis: Conduct and review in-depth stress, strain, and fatigue analysis for UAV mechanical systems operating under extreme conditions.

• Thermal Management Expertise: Develop and implement innovative thermal systems for high-performance UAVs.

• Cross-Functional Integration: Lead collaboration with multidisciplinary teams to integrate mechanical systems with avionics, sensors, and software controls.

• Material Innovation: Drive research and development of advanced materials for UAV applications, focusing on composites and lightweight alloys.

• Failure Analysis and Solutions: Lead root cause analysis of mechanical failures and propose long-term, impactful solutions.

• Regulatory Compliance Leadership: Ensure all designs meet and exceed UAS regulations and industry certifications.

• Research and Development: Spearhead R&D initiatives to advance UAS technologies, including autonomous navigation and advanced manufacturing techniques.

• Mentorship and Leadership: Provide technical guidance and mentorship to junior and mid-level engineers, fostering professional growth within the team.

• Documentation and Reporting: Author comprehensive technical documentation, including design reviews, test reports, and compliance certifications.

Qualifications:

• Education: Bachelor’s, Mechanical or Aerospace Engineering degree or equivalent experience.
• Experience: 10+ years of experience in engineering roles.

Skills:

• Advanced proficiency in CAD and mechanical design software (e.g., SolidWorks)
• Knowledge of geometric dimensioning and tolerancing (GD&T) and drafting
• Experience with design for manufacturability (DFMA) and tooling design
• Experience with finite element analysis (FEA) and other advanced simulation tools
• Experience in fluid dynamics, thermodynamics, structural mechanics, and aerodynamics
• Strong analytical, problem-solving skills, and ability to mentor 
• Proven ability to drive innovation and manage complex engineering projects 

Preferred Qualifications:

• Above experience including 5 years dedicated to UAV development
• Advanced proficiency in CAD primarily for aerospace and UAS applications
• Experience with advanced simulation tools (e.g. FEA, CFD)
• Expertise in structural mechanics, aerodynamics, thermodynamics
• In depth knowledge of UAV manufacturing processes, including 3D printing and advanced composite materials.
• Familiarity with advanced UAV-specific regulations and broader aerospace certification processes (e.g., DO-160, AS9100).

Pay Range by Level:

Level V - $160,000 - $191,000

Level VI - $191,000 - $207,000

#LI-ZB1

Work Arrangement
This is an onsite position with required domestic travel up to 25%.

Job Overview
This is a Flight Test Engineer (FTE) position for UAS development testing and designing of Unmanned Aircraft Systems (UAS), aviation electronic systems, and loitering munitions. The ideal candidate has experience with UAS flight test and project execution and implementing management procedures and controls. This person will provide advisory support and recommend project execution focus areas. This position requires teamwork, patience, a firm understanding of test and evaluation, safety and technical reviews and approvals, and the ability to travel to testing sites.

Essential Functions
• Perform all facets of flight testing, from initial planning through execution, data collection, reduction and analysis, report writing and recommendations    to ensure on-time completion
• Provide project officer leadership required to plan and execute developmental, operational and research test or operate as project engineer or flight        test engineer as required
• Provide a strict flight test disciplined approach to every aspect of flight test planning, execution, and deployed operations
• Provide advisory assistance to facilitate problem-solving and provide recommendations to ensure all flight tests are accomplished and are on time
• Interface with the various test organizations to support technical and safety plan approvals, 
  communicate program office priorities and work daily scheduling issues
• Interface with the prime contractor and subcontractors to support the prioritization and scheduling of test item modifications, maintenance and flight        test requirements
• Review and identify potential issues relating to modification packages for air vehicles, ground control stations, and other support equipment
• Assess and/or evaluate both subjective and objective data acquired through test execution
• Perform other duties as required.

Standard Essential Functions
• Regular and reliable attendance on a full time basis [or in accordance with posted schedule].
• Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is          consistent with the company's policies and practices.
• Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications and Competencies 
• Strong understanding of new concepts quickly and apply them accurately throughout an evolving environment
• Excellent communication, presentation, and interpersonal skills to effectively interface with other departments, customers, government                            representatives, and/or professionals
• Strong ability to professionally represent the organization as a prime technical contact
• Strong ability to provide leadership and guidance to less experienced professionals

Education / Certifications
• Bachelor's degree in Aerospace, Aeronautical, Mechanical Engineering or a related field is 
  required.
• Master's degree in Aerospace, Aeronautical, Mechanical Engineering or a related field is desired.

Experience
• 6+ years of experience in engineering
• At least four (4) of which in the DoD (preferred)
• Must possess test and evaluation experience in an aerospace program with knowledge, experience, and recognized ability to be considered an              aviation test engineering expert
• Experience with UAS flight test preferred
• Experience with ArduPilot mission planning software

Physical Requirements
The physical demands described here are representative of those that must be met by an employee to 
successfully perform the essential functions of this job. Reasonable accommodations may be made to enable 
individuals with disabilities to perform the essential functions. While performing the duties the employee is: 
Frequently required to stand for extended periods of time
Frequently required to lift up to 15 pounds
Occasionally experience a high level of noise, adverse weather or temperature conditions
Frequently required to reach overhead and frequently reach at/below shoulder level
Occasionally required to operate hand tools, equipment, heavy machinery
Occasionally required to operate motor vehicle

Security Clearance
• Ability to obtain/maintain a Top Secret/SCI DoD clearance, U.S. Citizenship required.

Work Arrangement
This is an on-site position.

Job Overview
We are seeking a highly skilled and motivated Senior Structural Engineer specializing in aircraft structures to join our team. As a Structural Engineer, you will play a key role in the design, analysis, and optimization of structural components for our unmanned aerial systems (UAS) and unmanned surface vehicles (USV). You will work closely with our engineering team to develop innovative solutions and enhance the performance and reliability of our products. 

Essential Functions
•    Collaborate with cross-functional teams to lead the structural layout, structural sizing into conceptual design and through detail design.
•    Partner with manufacturing team to generate fabrication and assembly work instructions.
•    Analyzing structural loads on both composite laminates, metallic structures, and plastic components using empirical methods, hand calculations,             finite element analysis (FEA).
•    Conduct static and dynamic structural analyses using finite element analysis (FEA) tools.
•    Prepare detailed technical reports, documentation, and presentations for internal and external stakeholders.
•    Supporting flight test planning, test execution, and aircraft modifications
•    Identify and implement innovative solutions to complex structural engineering challenges.
•    Develop, review, and approve structural designs, ensuring compliance with industry standards and regulatory requirements.
•    Develop structural design guides and toolsets that can be used by other engineers.
•    Perform other duties as assigned.

Standard Essential Functions
Regular and reliable attendance on a full time basis [or in accordance with posted schedule].
Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices.
Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications and Competencies
•    Foundational knowledge of aircraft load paths and structural sizing
•    Expert understanding of the theory and practical application of composite structures and their application to aircraft
•    Proficiency in finite element analysis (FEA) toolsets such as FEMAP or NASTRAN.
•    Proficiency with CAD software (e.g., Solidworks, NX, or CATIA).
•    Strong analytical and problem-solving skills.
•    Excellent communication and teamwork abilities.
•    Excellent analytical and problem-solving skills
•    Ability to work with multiple engineering disciplines on an aggressive schedule.
•    Ability to be flexible in various work scenarios to adjust priorities needed to meet evolving requirements and challenges.
•    Demonstrative ability to be proactive and take initiate during day-to-day tasks
•    Ability work independently, confidently making decisions to guide other towards project goals

Education/Certifications
•    Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, Civil Engineering or related field.
•    Master's Degree us a plus.

Experience
•    8+ years of structural engineering experience
•    Proven experience in structural analysis and design, preferably in aerospace industry.
•    Hands-on design and build experience.
•    Rapid prototyping experience.
•    Defense industry experience is a plus

Physical Requirements
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is:

Frequently required to sit, and to reach to use computers and other office equipment
Occasionally required to stand for extended periods of time
Occasionally required repetitive movements of wrists, hands, and/or fingers
For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the workday, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time.

Security Clearance
•    Ability to obtain/maintain a Top Secret/SCI DoD clearance, U.S. Citizenship required.

Security Clearance
•    Active Top Secret DoD clearance preferred, U.S. Citizenship required.

Work Arrangement
Onsite with occasional travel.

Job Overview
Sr. Aeromechanical Engineers work to solve the nation's hardest problems through rapidly deployed technology solutions. Are you an aerospace or mechanical engineer stuck in a narrow job? Do you want to rapidly build autonomous systems aligned with your hobbies and interests? This job is a lead aeromechanical engineer that takes napkin sketches of airplanes and robots to final production. We work with small teams to move fast and make fielded systems. Here you will lead a small agile team to make these systems a reality from napkin sketch to 1.0 prototype.

Essential Functions
•    Senior role within the engineering team that helps lead in the design and development of UAS products and subsystems.
•    Opportunity to build and tests prototype systems to validate designs
•    Have decision-making abilities for design challenges and coordination with multidisciplinary engineering groups
•    Performance of all vehicle designs from initial concept to complete production-ready design
•    Conduct presentations (Formal and Informal) on designs.
•    Uses scientific and engineering principles to assess deficiencies in any given design and the impact of potential changes
•    Makes complex decisions to meet stated and derived requirements
•    Complete assigned tasks within the project schedule and budget
•    Provide guidance and mentorship to others in both their discipline and company values
•    Conduct FEA and CFD simulation analysis on aircraft and powerplants Design airframes and other aeromechanical parts
•    Act as an interface to customers as ideas are communicated
•    Travel as required

Standard Essential Functions

Regular and reliable attendance on a full-time basis [or in accordance with posted schedule].
Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices. Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications and Competencies
•    Demonstrated competence in Mechanical Engineering processes and design/analysis tools, solving Mechanics & Kinematics problems, solving Thermodynamics problems
•    Experienced in successfully designing mil-y electronics products
•    Demonstrated understanding of metallic, plastic, and composite material properties
•    Demonstrated ability to solve basic structural dynamics problems
•    Proficiency in SolidWorks, Excel, Word, and PowerPoint is required
•    Demonstrated understanding of industry design and documentation standards (GD&T, ASME, Change Control, etc.)
•    Experienced with designing: machined parts, composite parts, injection molded parts, sheet metal parts, wire assemblies, and mechanical assemblies for low, medium, and high-volume                             manufacturing processes
•    Experienced with: mechanical, lab, field, flight, and environmental testing
•    Demonstrated understanding of engineering configuration management processes
•    Demonstrated ability to work with high-level program requirements, organize, schedule, and delegate tasks to an engineering team
•    Demonstrated leadership experience
•    Periods of development may require long irregular hours around deadlines, weekends, and some holidays and in-field test environments

Education / Certifications
•    Bachelor's Degree in Mechanical or Aerospace Engineering

Experience
•    Minimum of 8+ years of experience in a progressive technical capacity within an engineering organization

Physical Requirements
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties the employee is:
Frequently required to sit, and to reach to use computers and other office equipment

Work Arrangement
This is an onsite position.

Job Overview
The Project Engineer 3 provides engineering and technical support for assigned projects, ensuring they are completed safely, on time, within scope, and within budget. This role works closely with project managers, internal engineering team members, contractors, clients, and other stakeholders to coordinate tasks, manage documentation, and solve technical issues during the project lifecycle.

Essential Functions
•    Lead the planning, executing, and closing projects according to deadlines and budgets.
•    Prepare and review project documentation including schedules, reports, submittals, and change orders.
•    Coordinate and communicate with contractors, vendors, clients, and internal teams.
•    Monitor project progress and provide regular updates to project leadership.
•    Support field activities by addressing technical questions and helping to resolve issues.
•    Ensure compliance with safety and quality standards, company policies, and applicable codes and regulations.
•    Participate in design reviews and provide input on constructability and value engineering.
•    Support procurement activities for assigned projects
•    Track project costs and support project billing and invoicing processes.
•    Maintain organized project records and documentation.
•    Perform other duties as required.

Standard Essential Functions
Regular and reliable attendance on a full-time basis [or in accordance with posted schedule].
Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices.

Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications and Competencies
•    Working knowledge of project management, scheduling, requirements, and program office functions
•    Strong understanding of project management principles and engineering practices.
•    Extremely proficiency with Microsoft Office Suite (Word, Excel, Project, Outlook).
•    Strong communication, organizational, and problem-solving skills.
•    Strong ability to work collaboratively in a team environment and adapt to changing priorities.

Education / Certifications
•    Bachelor’s degree in engineering (Aerospace, Mechanical, Electrical, or related field).

Experience
•    6+ years of relevant experience in engineering, aerospace, or project management.

Physical Requirements
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is:

Frequently required to sit, and to reach to use computers and other office equipment
Frequently required to stand for extended periods of time

Security Clearance
•    Ability to obtain/maintain a Top-Secret DoD clearance, U.S. Citizenship required. 

Job Overview

We are a high-paced and agile manufacturing organization that is growing rapidly. We are searching for a multi-faceted production and manufacturing engineer. We are looking for someone who understands formal manufacturing environments and is able to focus on the key elements that will take us to the next level. This role is broad from shaping our MRP system to evolving material and production management systems to planning production.

Essential Functions

• Evaluates existing manufacturing processes to improve them, working broadly from supply chain to business systems to help things run smoothly.
• Develops manufacturing processes by studying product requirements, researching testing methods, and conferring with equipment vendors.
• Designs and implements tooling on the production floor.
• Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout.
• Assures product and process quality by designing and implementing testing methods where required.
• Provides manufacturing decision-making information by calculating production, labor, and material costs.
• Prepares product and process reports by collecting, analyzing, and summarizing information and trends.
• Provides manufacturing engineering information by answering questions and requests.
• Maintains product and company reputation by complying with government regulations.
• Keeps equipment operational by coordinating maintenance and repair services.
• Maintains product and process database by creating assembly work instructions.
• Completes design and development projects by training and guiding technicians.
• Performs other related duties as assigned.

Standard Essential Functions

• Regular and reliable attendance on a full time basis [or in accordance with posted schedule].
• Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices.
• Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications and Competencies

• Highly skilled in CAD/CAM software and manufacturing simulation tools.
• Strong ability to interoperate and explain mechanical and electrical drawings to production technicians.
• Excellent analytical and problem-solving skills.
• Strong Ability to be flexible in various work scenarios to adjust priorities needed to meet evolving requirements and challenges.
• Demonstrative ability to be proactive and take initiate to during day-to-day tasks.
• Strong ability to work independently, confidently making decisions to guide other towards project goals.
• Strong ability to work efficiently in a collaborative team environment.
• Excellent written and verbal communication skills to effectively convey ideas, provide guidance and collaborate with other team members.
• Comprehensive understanding of regulatory and industry standards, such as FAA regulations, AS9100, ISO 9001, and IPC-610/620.

Education / Certifications

• Bachelor of Science in engineering or related field required.

Experience

• Minimum of 6-9 years of manufacturing experience
• Defense manufacturing is a plus
• Experience with an MRP system
• Experience with composites a plus
• Experience working with contract manufacturing a plus
• Experience using CAD or CAM software (SolidWorks preferred)

Physical Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is:

• Frequently required to sit, and to reach to use computers and other office equipment
• Occasionally required to stand for extended periods of time
• Occasionally required to lift up to 15 pounds

For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time.

Security Clearance

• Ability to obtain/maintain a Top Secret DoD clearance, U.S. Citizenship required.

Disclaimer:

AEVEX Aerospace is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Work Arrangement

This is an onsite position in Tampa, FL, Huntsville , or Northern, VA.

Job Overview

The Systems Engineer 3 will contribute to the development, integration, and testing of Unmanned Aerial Systems (UAS). This upper-level role requires a hands-on approach to support subsystem integration and execute test plans to meet aerospace standards under the guidance of senior engineers.

Essential Functions

• Design and implement integration plans for UAS subsystems, ensuring compatibility across mechanical, electrical, and software components.
• Support circuit board design, including schematic capture and PCB layout, using tools such as Altium or Eagle, under senior engineer supervision.
• Conduct benchtop electrical tests, such as power distribution and signal integrity checks, using oscilloscopes, multimeters, and other test equipment.
• Own propulsion system requirements, interfaces, and verification plans for jet and RATO-equipped UAS platforms
• Perform RF testing, including antenna performance and signal propagation, to support communication and telemetry system integration.
• Execute test plans for environmental, functional, and stress testing, following established procedures to meet aerospace standards (e.g., MIL-STD, DO-160).
• Identify and resolve integration issues related to electrical systems & mechanical systems, collaborating with cross-functional teams.
• Prepare technical documentation, including test procedures and reports, to support system validation and certification.
• Support ground test, hot-fire, integration, and flight test planning and execution
• Define propulsion system architectures, including engines, RATO units, ignition systems, fuel delivery, and controls
• Manage propulsion interfaces with airframe, avionics, power, controls, and safety systems
• Coordinate with suppliers and partners on propulsion components and qualification
• Support certification, compliance, and range safety requirements as applicable
• Work on multi-discipline teams with systems engineers, software developers, electrical engineers, and mechanical engineers to support cohesive system design and performance.
• Follow regulations and safety standards during integration and testing activities.
• Perform other duties as required.

Standard Essential Functions

• Regular and reliable attendance on a full time basis [or in accordance with posted schedule].
• Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices.
• Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications

• Excellent at hands on building of mechanical assemblies for support of testing activities, fit checks, etc.
• Proficiency in electrical design tools (e.g., Altium Designer, Eagle) and data analysis tools.
• Familiarity with test equipment (e.g., oscilloscopes, multimeters, signal generators).
• Strong understanding of electrical systems (power management, analog/digital circuits).
• Familiarity of RF principles (signal modulation, antenna performance) is a plus.
• Familiarity of Mechanical Design Software (SolidWorks, Fusion360) is a plus.
• Familiarity with aerospace/MIL standards.
• Strong problem-solving, communication, and teamwork skills
• Proficient knowledge of embedded systems or firmware development.
• Strong written and verbal communication skills, with the ability to clearly convey complex technical information to multidisciplinary teams, program management, and external stakeholders.

Education / Certifications

• Bachelor's Degree in Electrical Engineering, Mechanical Engineering, Aerospace Engineering, Systems Engineering, or a related field.
• Master’s degree in Electrical Engineering, Mechanical Engineering, Aerospace Engineering, Systems Engineering, or a related field desirable.

Experience

• 6+ years of relevant engineering experience supporting defense, aerospace, or related technical programs.
• Hands-on experience with circuit board design and/or benchtop electrical testing.
• Experience with UAS or drone systems through projects.
• Experience with integration and testing of subsystems into aerospace vehicles.
• Experience working with electrical systems, including circuit board design, benchtop electrical testing, and RF work

Physical Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is:

• Frequently required to sit, and to reach to use computers and other office equipment
• Occasionally required repetitive movements of wrists, hands, and/or fingers

For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time.

Security Clearance

• Ability to obtain/maintain a Top Secret DoD clearance, U.S. Citizenship required.

Work Arrangement

This is an onsite position in Tampa, FL, Huntsville , or Northern, VA.

Job Overview

A Mechanical Engineer 3 is responsible for designing, analyzing, and improving mechanical systems and components.

Essential Functions

• Plan and perform engineering research, design, and development in conformance with design, engineering, and customer specifications
• Identify and document requirement through customer interface
• Create and review Mechanical CAD drawings and component layout designs
• Create, review, and maintain assembly drawings for enclosures, circuit boards, internal and external cable assemblies, etc.
• Own mass properties (weight, CG, inertia) and manage configuration trade-offs to meet performance targets
• Design and support tooling, fixtures, and jigs for prototype builds, test, and low-rate production
• Apply DFx principles (DFM, DFA, DFS, DFR) to improve manufacturability, assembly, reliability, serviceability, and cost
• Conduct rapid prototyping (3D printing, composites, machined parts) and hands-on integration
• Conduct tolerance analysis, basic structural trade studies, and environmental considerations
• Support build, integration, and flight test activities; rapidly troubleshoot mechanical issues
• Utilize industry and/or military specifications for Shock, Vibration, Temperature and Humidity requirements to develop and validate products
• Create and maintain engineering documentation (drawings, user instructions, bill of materials, etc.)
• Review mechanical designs and drawings of other Engineers
• Support manufacturing with aiding in work instruction generation, technical guidance on process settings and aid in development/implementation of new manufacturing test/build equipment as need
• Support production/fabrication by working closely with technicians on product build

Participate in design reviews and cross-functional integration efforts

Other duties as assigned

Standard Essential Functions

• Regular and reliable attendance on a full time basis [or in accordance with posted schedule].
• Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices.
• Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications

• Proficient with 2D or 3D engineering design and manufacturing tools (e.g., AutoCAD, ProE or other)
• Adequate knowledge of engineering analysis tools (ANSYS, ProMechanica or similar)
• Proficient with GD&T and engineering drawing standards
• Strong knowledge of Solidworks
• Detail oriented and capable with working in a team environment
• Strong verbal and written communication skills

Education / Certifications

• Bachelor's Degree in Mechanical Engineering or other related discipline.

Experience

• 6-9 years of mechanical engineering experience.
• Hands-on experience with computer-aided engineering (CAE) and computer-aided manufacturing (CAM)

Physical Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is:

• Frequently required repetitive movements of wrists, hands, and/or fingers

For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time.

Security Clearance

• Ability to obtain/maintain a Top Secret DoD clearance, U.S. Citizenship required.

Work Arrangement

This is an onsite position in Tampa, FL, Huntsville , or Northern, VA.

Job Overview

The Sr. Mechanical Engineer   designs, develops, and oversees mechanical systems and components for various projects. Leads engineering teams, manages project timelines, ensures compliance with industry standards, performs technical analysis, and collaborates with cross-functional departments to deliver efficient and reliable mechanical solutions.

Essential Functions

• Investigates, analyzes, plans, designs, develops, implements, tests, to evaluate military weapons systems
• Reviews and prepares engineering and technical analyses, reports, change proposals, and other technical documentation
• Perform system integration, configuration management, quality assurance testing, or acquisition and resource management
• Analyzes designs, develops, implements, tests, or evaluates software, components, or systems related to engineering or functional requirements of military weapons systems, associated support systems, or Leads the execution of complex tasks
• Analyzes designs, develops, implements, tests, or evaluates software related to engineering or functional requirements of military weapons systems and associated support systems.
• Reviews and prepares engineering and technical analyses, reports, change proposals, and other technical documentation
• Own mass properties (weight, CG, inertia) and manage configuration trade-offs to meet performance targets
• Design and support tooling, fixtures, and jigs for prototype builds, test, and low-rate production
• Apply DFx principles (DFM, DFA, DFS, DFR) to improve manufacturability, assembly, reliability, serviceability, and cost
• Lead design reviews and cross-functional integration efforts
• Lead rapid prototyping (3D printing, composites, machined parts) and hands-on integration
• Conduct tolerance analysis, basic structural trade studies, and environmental considerations
• Lead build, integration, and flight test activities; rapidly troubleshoot mechanical issues
• Provide mentorship to other members of the team.
• Performs other related duties as assigned

Standard Essential Functions

• Regular and reliable attendance on a full time basis [or in accordance with posted schedule].
• Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices.
• Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications

• Strong ability to performs tasks with little or no guidance
• Familiarity with 2D or 3D engineering design and manufacturing tools (e.g., AutoCAD, ProE or other)
• Strong knowledge of engineering analysis tools (ANSYS, ProMechanica or similar)
• Extremely Proficient with GD&T and engineering drawing standards
• Strong knowledge of Solidworks
• Extremely detail oriented and capable with working in a team environment

Education / Certifications

• Bachelor's Degree in Mechanical Engineering or other related discipline.
• Master's Degree Desired

Experience

• 9+ years of mechanical engineering experience
• DoD experience highly preferred
• Experience in SolidWorks, SolidWorks Simulation, AutoCAD, electrical circuit design/troubleshooting, printed circuit board design, reverse engineering techniques, and Microsoft Project
• Experience with computer-aided engineering (CAE) and computer-aided manufacturing (CAM)

Physical Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is:

• Frequently required repetitive movements of wrists, hands, and/or fingers
• Frequently required to sit, and to reach to use computers and other office equipment

For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time.

Security Clearance

• Ability to obtain/maintain a Top Secret DoD clearance, U.S. Citizenship required.

Work Arrangement

This is an onsite position in Tampa, FL, Huntsville , or Northern, VA.

Job Overview

A Senior Software Engineer leads the software development team as they create software solutions for AEVEX. This persons serves as an in-house expert, both for managers from other departments who need software solutions and the less experienced staff within the Software department. This person leads software development projects, starting with collecting and studying the information and needs of the user. This person looks at different possible solutions and how feasible those options are. This person is also responsible for keeping the project on track, documenting everything and keeping proprietary information confidential.

Essential Functions

• Responsible for all aspects of the software development process including requirements, design, implementation, functional test, trouble shooting.
• Develop, integrate, and maintain embedded software for UAS platforms, including flight control, sensor interfaces, and vehicle management
• Implement and tune control loops and flight-critical software in coordination with GNC and systems teams
• Work with upper management to define software requirements and take the lead on operational and technical projects.
• Develop drivers and interfaces for sensors, radios, ESCs, and payloads
• Lead specification, design, development, maintenance, integration, documentation, debug and testing of software for Windows and embedded software applications in C and C++.
• Lead embedded applications in custom headless devices with focus on real-time performance aspects including multi-threading, time synchronization.
• Configuration, troubleshooting, data analysis, and integration of a wide variety of applications and equipment such as internal software libraries and products, GPS receivers, LiDAR sensors, Inertial sensors, network routers, radio modems, meteorological sensors, serial port hubs, etc.
• Lead contribute to system integration, test procedures, and documentation
• Support production software builds, configuration management, and field updates
• Lead development, integration and processing Geospatial Information Systems
• Support both military and commercial applications
• Collaborate with autonomy, electrical, and mechanical teams to resolve integration issues
• Perform other related duties as assigned

Standard Essential Functions

• Regular and reliable attendance on a full time basis [or in accordance with posted schedule].
• Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices.
• Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications

• Strong understanding of GPS, Inertial Navigation, Sensor fusion from a software architecture real-time processing perspective
• Strong ability to work independently with little supervision
• Possess excellent organization and problem-solving skills with extensive hands-on experience in software development
• Strong knowledge of communication protocols (e.g. SPI, I2C, UART, CAN)
• Extremely proficient software development of microcontroller level embedded systems

Education / Certifications

• Bachelor's degree in Computer Engineering, Computer Science or related field required, MS preferred.

Experience

• 10+ years of software development experience
• Prior experience developing Autopilot systems, ground control stations, or flight simulation software
• Prior experience with FPGA development

Physical Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is:

• Frequently required to sit, and to reach to use computers and other office equipment

For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time.

Security Clearance

• Ability to obtain/maintain a Top Secret DoD clearance, U.S. Citizenship required.

Work Arrangement

This is an onsite position in Tampa, FL, Huntsville , or Northern, VA.

Job Overview

A Senior Systems Engineer leads projects related to creating system architecture, develops and defines system and product requirements, defines methods for verifying compliance to requirements, creates new solutions for the systems, and helps systems work more effectively. This individual may train or mentor Systems Engineers who have less experience and make decisions on projects and department activities. Their overall purpose is to ensure the product or system runs as efficiently as possible and works consistently to meet the needs of the company.

Essential Functions

• Provide expertise, oversight, and participation in activities involving weapon systems and associated hardware/software development, integration, test, configuration management, and acquisition and resource management for new capabilities to an existing weapon system.
• Develops and documents system and subsystem level specified and derived requirements and allocates requirements through the appropriate work breakdown structure (WBS) as codified in a System Requirements Review (SRR) process
• Lead requirements identification, verification, validation, and testing process
• Lead program technical interchange meetings, program management reviews, executive management reviews, test-related meetings, lab and flight test events, integrated product team meetings, software/hardware design reviews, platform integration meetings, etc.
• Own propulsion system requirements, interfaces, and verification plans for jet and RATO-equipped UAS platforms
• Support ground test, hot-fire, integration, and flight test planning and execution
• Define propulsion system architectures, including engines, RATO units, ignition systems, fuel delivery, and controls
• Manage propulsion interfaces with airframe, avionics, power, controls, and safety systems
• Drive certification, compliance, and range safety requirements as applicable
• Acts as engineering team leader, developing system engineering procedures and controls, managing project efforts, and taking the lead in problem resolution for aircraft research, development, production, and lifecycle acquisition and sustainment activities
• Interfaces with weapons system contractors, vendors, and Government representatives regarding the technical aspects of engineering activities
• Independently applies engineering principles to investigate, analyze, plan, oversee, and evaluate weapons system development and sustainment activities
• Reviews and prepares engineering and technical analyses, reports, change proposals, and other technical documentation
• Perform other duties as assigned.

Standard Essential Functions

• Regular and reliable attendance on a full time basis [or in accordance with posted schedule].
• Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices.
• Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications

• Skilled in use of DOORs, Cameo or other requirements management systems
• Strong project management skills and experience with MS Project
• Experience using workflow management software such as Jira
• Comfort with SysML and Block Diagram Development in tools such as Visio, Cameo, and/or Enterprise Architect
• Skilled working in the setting of an integrated product team (IPT) and/or serving as a lead of one.
• Ability to decompose complex systems into manageable subsystems and architectures that meet requirements.
• Demonstrated Organization and Leadership skills
• Ability to work collaboratively across functional boundaries to apply problem-solving and analytical skills
• Excellent written and verbal communication skills, with the ability to clearly convey complex technical information to multidisciplinary teams, program management, and external stakeholders.

Education / Certifications

• Bachelor's Degree in Electrical Engineering, Mechanical Engineering, Aerospace Engineering, Systems Engineering, or a related field.
• Master’s degree in Electrical Engineering, Mechanical Engineering, Aerospace Engineering, Systems Engineering, or a related field desirable.

Experience

• 9+ years of relevant engineering experience supporting defense, aerospace, or related technical programs.
• 4+ years of system engineering experience on DoD programs/projects applying various MIL-STD, MIL-HDBK, and DoD certification processes

Physical Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is:

• Constantly required to sit, and to reach to use computers and other office equipment

For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time.

Security Clearance

• Ability to obtain/maintain a Top Secret DoD clearance, U.S. Citizenship required.

Work Arrangement

This is an onsite position in Tampa, FL, Huntsville , or Northern, VA.

Job Overview

The Systems Engineer 2 supports the development, integration, and sustainment of complex aerospace and defense systems throughout the program lifecycle. This position contributes to defining system architectures, developing and managing requirements, and ensuring technical solutions meet customer, mission, and regulatory objectives.

Essential Functions

• Support the development, decomposition, and documentation pf system and subsystem-level requirements, including specified and derived requirements, in accordance with program and contract objectives.
• Support the full requirements lifecycle, including identification, traceability, verification, validation, and configuration management.
• Develop and maintain technical documentation such as system block diagrams, interface control documents (ICDs), specifications, user manuals, and standard operating procedures.
• Participate in systems engineering planning, including risk management, resource allocation, schedule coordination, and technical performance assessment.
• Apply disciplined systems engineering principles to analyze, plan, and evaluate design, integration, test, and sustainment activities in accordance with established processes and standards (e.g., INCOSE, MIL-STD, AS9100).
• Contribute to the development and continuous improvement of systems engineering processes, tools, and controls to ensure consistency and compliance across programs.
• Support ground test, hot-fire, integration, and flight test planning and execution
• Assist with defining propulsion system architectures, including engines, RATO units, ignition systems, fuel delivery, and controls
• Manage propulsion interfaces with airframe, avionics, power, controls, and safety systems
• Support certification, compliance, and range safety requirements as applicable
• Support technical issue resolution across research, development, production, and lifecycle sustainment phases for manned and unmanned aircraft systems or mission-related platforms.
• Support the preparation and review of engineering analyses, technical reports, change proposals, and other supporting documentation for internal and customer delivery.
• Participate in and support technical and programmatic reviews, including Technical Interchange Meetings (TIMs), Preliminary and Critical Design Reviews (PDR/CDR), Test Readiness Reviews (TRRs), integration meetings, and flight or laboratory test events.
• Perform other duties as assigned to support successful program execution.

Standard Essential Functions

• Regular and reliable attendance on a full time basis [or in accordance with posted schedule].
• Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices.
• Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications

• Proficient knowledge of Unmanned Aircraft Systems (UAS) operations, maintenance, modification, and research, development, test, and evaluation (RDT&E) activities across the system lifecycle.
• Working familiarity with MIL-STD-810 (environmental testing) and MIL-STD-461/464 (EMI/EMC and electromagnetic environmental effects) test standards, including application in qualification and verification planning.
• Demonstrated proficiency with configuration management tools such as Jama Connect, Windchill, DOORS, or Git, and a solid understanding of CM principles per MIL-HDBK-61A and AS9100 frameworks.
• Working knowledge of scripting languages (e.g., Python, Bash, or Perl) for process automation, data parsing, or test result analysis is desirable but not required.
• Proven ability to plan and prioritize work effectively, manage and prioritize concurrent technical tasks, and make sound, data-driven decisions in a dynamic engineering environment.
• Proficient analytical and problem-solving skills with the ability to synthesize data into practical, actionable engineering solutions.
• Proficient written and verbal communication

Education / Certifications

• Bachelor’s degree in Systems Engineering, Electrical Engineering, Mechanical Engineering, Computer Science, Aerospace Engineering, or a related technical discipline.

Experience

• 3+ years of relevant engineering experience supporting defense, aerospace, or related technical programs.
• Experience with report template scripting (e.g., Jama Velocity templates or equivalent markup) for automating documentation and customizing data exports.

Physical Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is:

• Constantly required to sit, and to reach to use computers and other office equipment
• Frequently required repetitive movements of wrists, hands, and/or fingers

For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time.

Security Clearance

• Ability to obtain/maintain a Top Secret DoD clearance, U.S. Citizenship required.

Work Arrangement

This is an onsite position in Tampa, FL, Huntsville , or Northern, VA.

Job Overview

A Mechanical Engineer 2 is responsible for designing, analyzing, and improving mechanical systems and components.

Essential Functions

• Support the planning and performing engineering research, design, and development in conformance with design, engineering, and customer specifications
• Identify and document requirement through customer interface
• Create and review Mechanical CAD drawings and component layout designs
• Create, review, and maintain assembly drawings for enclosures, circuit boards, internal and external cable assemblies, etc.
• Design and support tooling, fixtures, and jigs for prototype builds, test, and low-rate production
• Apply DFx principles (DFM, DFA, DFS, DFR) to improve manufacturability, assembly, reliability, serviceability, and cost
• Support rapid prototyping (3D printing, composites, machined parts) and hands-on integration
• Assist with conducting tolerance analysis, basic structural trade studies, and environmental considerations
• Support build, integration, and flight test activities; rapidly troubleshoot mechanical issues
• Utilize industry and/or military specifications for Shock, Vibration, Temperature and Humidity requirements to develop and validate products
• Support the creation and maintenance of engineering documentation (drawings, user instructions, bill of materials, etc.)
• Support manufacturing with aiding in work instruction generation, technical guidance on process settings and aid in development/implementation of new manufacturing test/build equipment as need
• Support production/fabrication by working closely with technicians on product build
• Other duties as assigned

Standard Essential Functions

• Regular and reliable attendance on a full time basis [or in accordance with posted schedule].
• Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices.
• Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications

• Familiarity with 2D or 3D engineering design and manufacturing tools (e.g., AutoCAD, ProE or other)
• Familiarity with GD&T and engineering drawing standards
• Familiarity with engineering analysis tools (ANSYS, ProMechanica or similar)
• Proficient knowledge of Solidworks
• Detail oriented and capable with working in a team environment
• Strong verbal and written communication skills

Education / Certifications

• Bachelor's Degree in Mechanical Engineering or other related discipline.

Experience

• 3-6 years of mechanical engineering experience.

Physical Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is:

• Frequently required repetitive movements of wrists, hands, and/or fingers
• Frequently required to sit, and to reach to use computers and other office equipment

For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time.

Security Clearance

• Ability to obtain/maintain a Top Secret DoD clearance, U.S. Citizenship required.

Work Arrangement
This is an onsite position and may require up to 25% travel, within and outside the United States.

Job Overview
The Aeromechanical Engineer II is responsible for the design, test, build, and improvement of unmanned aerial vehicles (UAVs), unmanned surface vehicles (USVs), and their support equipment based on contractual or internal requirements. 

Essential Functions
•    Use Solidworks to design and modify parts and assemblies.
•    Create 2D drawings of parts and assemblies complete with bill of material (BOM) for internal or external fabrication and assembly.
•    Perform aerodynamic analysis and calculations to inform the design and predict the behavior of aircraft.
•    Conduct simulations, testing, and prototyping to validate designs and ensure they meet performance and safety requirements.
•    Collaborate with cross-functional teams, including manufacturing, electrical, software, and systems engineers, to integrate mechanical systems into larger aerospace systems.
•    Perform risk assessments and develop mitigation strategies for potential mechanical failures.
•    Maintain accurate documentation of designs, processes, and test results.
•    Design and oversee the manufacturing and assembly processes of mechanical components, ensuring they meet quality and performance standards.
•    Perform other duties as assigned.

Standard Essential Functions
Regular and reliable attendance on a full time basis 
Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices.
Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications and Competencies
•    Proficiency in CAD software, such as SolidWorks or CATIA.
•    Experience with Finite Element Analysis (FEA) and Computational Fluid Dynamics (CFD).
•    Strong knowledge of materials, manufacturing processes, and quality control procedures.
•    Excellent communication and collaboration skills, with the ability to work effectively in a team environment.
•    Familiarity with 3D printing technologies
•    Understanding of regulatory and industry standards, such as FAA regulations, AS9100, and ISO 9001

Education / Certifications
•    Bachelor's degree in Aerospace, Aeronautical, Mechanical Engineering or a related field.
•    Master's degree in Aerospace, Aeronautical, Mechanical Engineering Engineering or a related field is preferred.
•    Solidworks Certified Professional in Mechanical Design (CSWP) is a plus.

Experience
•    3-6 years of experience in aerospace or a related industry.
•    Experience with UAVs or RC aircraft.
•    Experience in a rapid prototype environment.
•    Experience with Star-CCM+ and XFLR a plus.

Physical Requirements
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties the employee is:
Frequently required to sit, and to reach to use computers and other office equipment

Security Clearance
•    Ability to obtain/maintain a Top-Secret DoD clearance, U.S. Citizenship required.