ABOUT THE JOB

We are seeking a highly motivated and experienced Electrical Engineer to join our team in Costa Mesa, California. You will work closely with the program leadership and a wide spectrum of cross-departments as part of a team focused on solving hard problems and changing the industry forever. In this role you will be responsible for designing and supporting the integration of various subsystems, supporting testing efforts, and ensuring overall system performance meets the required specifications and standards. Join our dynamic team and help us build the next generation of autonomous flight systems.

WHAT YOU'LL DO

• Full cycle PCB design including collecting requirements, schematic design, component selection, supervision or completion of layout, bring-up, test, debug and system integration
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both lab equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools
• Development of payloads and subsystems (sensors, payload interfaces, power management, and networking)
• Develop system interconnect diagrams and define wire harnesses that connect electronic equipment within a subsystem
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products
• Work in a fast-paced environment supporting new developments and customer operated hardware
• Conduct peer-level and cross-discipline design reviews
• Design and support the integration & testing of an rotorcraft system through TRLs 3-8.
• Conduct vehicle platform system design & analysis as required by your supported program or effort
• Conduct design reviews, perform requirements analysis, and plan system verification to ensure compliance with project goals and industry standards
• Work within a dynamic team of multidisciplinary engineers and specialists throughout the life of product design, integration, and test effort

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 4+ years of experience designing, testing, and troubleshooting complex board designs
• Knowledge of modern analog and digital electronics and electronic circuits.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Familiarity with software development processes and tools such as git, Github, JIRA, etc
• Comfortable with a variety of electronic CAD tools (Altium preferred, Eagle and others acceptable)
• Experience in design for signal integrity / power integrity
• Experience with battery systems and ability to support alternate battery systems design
• Experience with high reliability systems
• Experience with radio frequency-based systems
• Experience with rapid payload/sensor integration
• Experience in designing and integrating high power electronics
• Experience in fieldable system design
• Comfortable in conducting worst case circuit or uncertainty analysis
• High-ownership and a bias toward action – if you see a problem, you want to solve and fix it
• Eligible to obtain and maintain an active U.S. Secret security clearance
• Ability to travel 25% with potential surges above 25%

PREFERRED QUALIFICATIONS

• Experience designing electrical and power systems for autonomous rotorcraft.
• Experience with battery systems both primary and secondary chemistries.
• Experience with High Voltage Power Electronics.
• Experience with inverters and high power electric motors.
• Understanding of MIL-STD-461, MIL-STD-810G
• Outstanding leadership and interpersonal skills
• Familiarity with running a qualification campaign for flight hardware
• Familiarity with designing for rugged environments
• Experience with electro-mechanical and electrical design concepts
• Experience with Formula SAE, Baja SAE, Design Build Fly, etc.

ABOUT THE TEAM

Anduril’s Air and Ground Deterrence (AGD) Division develops integrated robotic systems designed to provide multi-domain situational awareness and force protection across land, sea, and air. From detection to tracking, identification, deterrence, and defeat, our family of networked sensors and effectors enables our customers to rapidly detect and identify potential threats. close the kill chain against a broad range of Unmanned Aerial System (UAS) threats.

Working across product, engineering, sales, logistics, operations, and mission success, the multidisciplinary Sentry Hardware team with AGD serves as the key system integrator of the Anduril Sentry Family of Systems (FoS). In particular, the Sentry Electrical Engineering Team drives end-to-end development, from electrical architecture and ruggedized hardware design to verification, integration, and test, ensuring scalable, production and mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and other key stakeholders.

ABOUT THE JOB

The Sentry Engineering team builds hardware products and systems that leverage artificial intelligence to provide highly accurate, persistent autonomous awareness across land, sea and air. With an AI-enabled edge processing, continuous 360 pan / tilt capability, and a variety of radars and sensors, Sentry can autonomously identify, detect, and track objects of interest to bring increased awareness to borders, military bases, oil and gas pipelines, airports and other critical infrastructure.

We are looking for an Electrical Sustainment Engineer to join our rapidly growing team in Irvine, CA. This role will own rapidly developed, ruggedized electronics design in addition to scaling legacy design concepts to support full-rate production. In this role, you will partner with our Architecture and Product Management team to help drive system requirements prior to owning full PCB and/or electrical system design. This will require identifying high risk areas, creating and validating electronics designs for embedded compute and/or power systems, and testing for long term-reliability while considering manufacturability and testability in the design.

If you are someone who enjoys designing mission-critical electrical circuit cards and integrated systems with the freedom to drive product development from often undefined requirements then this role is for you.

WHAT YOU’LL DO

• Take ownership as the main point of contact for electrical integration activities.
• Provide hands on and in-field support of prototype and production level product.
• Collaborate with mechanical engineers to optimize selection, design and integration of high power components, modules and distribution.
• Trade-off component and module selections against size, weight, power and EMC requirements.
• Collaborate with design team to achieve reliability goals at a system level in context of concepts of operation.

REQUIRED QUALIFICATIONS

• Self starter with the ability to design digital & analog electronics from concept and functional prototype, to production ready product.
• Ability to troubleshoot existing hardware to find root cause of issues and implement improvements to improve the design.
• Develop clear documentation to capture design requirements, specifications, test coverage, and test reports.
• Complete full cycle PCB design including collecting requirements, schematic design, component selection, completion of layout, bring-up, test, debug, validation, characterization, and integration with the system.
• Work closely with other mechanical, software, firmware, and test engineers to deliver fully functional products.
• Work in a fast-paced environment supporting new developments, active deployments, and customer operated hardware.
• Concurrently manage involvement in multiple projects at various stages.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

PREFERRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 4+ years of experience designing, testing and troubleshooting complex board designs and products.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with switch mode power supply design and testing.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Exceptional organization and communication skills (both written and oral).
• Proficient with Altium Designer or equivalent electronic design automation design tools.
• Proficiency with scripting languages (Python, Matlab, etc.)
• Ability to root cause Full stack HLOS application to hardware component level issues.

ABOUT THE TEAM 

Anduril Intelligence Systems (AIS) is focused on positioning Anduril as a lead provider of specialized engineering and products for Intelligence Community (IC) customers. We work within the IC to understand their requirements, shape their concepts of operation, and deliver exquisite capability across their problem set. We aim to develop and deploy critically needed capabilities that address our customers’ most pressing national security requirements.

ABOUT THE JOB

We are looking for an Electrical Engineer to join our rapidly growing team in Reston, Virginia. In this role you will be responsible for designing, developing, augmenting, adapting, troubleshooting, and managing fabrication of printed circuit boards (PCB) through to working electronic devices. The PCB designs you support will be complex, multilayer printed circuit boards that meet rigorous performance and reliability standards. You will collaborate closely with cross-functional teams, including AIS and program leadership, project managers, electrical & mechanical engineers, software engineers, vendors, suppliers, and manufacturers to develop and deliver innovative solutions and ensure seamless integration of completed electronics, firmware, and application software into final deliverable products. This position will require the ability to work on both existing and new designs, troubleshoot and reverse engineer existing PCB designs, and have a strong understanding of the manufacturing process. You will need to work within tight timelines and resource constraints.

WHAT YOU’LL DO 

• Work directly with project managers to produce PCB designs supporting AIS programs
• Apply modern design standards and guidelines to create highly reliable, highly manufacturable assemblies
• Implement designs that can support reuse of existing System-on-Chip, System-on-Module cores, or all new designs, as needed, that focus on edge computation, FPGA, deployment, high precision sensors, RF, and both low and high-power designs
• Own the end-to-end design-to-manufacture pipeline and bill of material (BOM), coordinating external PCB design and manufacturing, and assembly, as needed, across multiple fabrication and assembly houses
• Work in a fast-paced environment, juggling multiple concurrent projects and customers
• Work well on your own and as part of interdisciplinary teams

REQUIRED QUALIFICATIONS

• Bachelor’s degree in electrical engineering or similar and 5+ years of professional experience in PCB design
• Ability to read and interpret schematics and apply best practices appropriate for each design
• Expertise in PCB fabrication processes, limitations, design rules, and best practices
• Experience using Altium Designer CAD tools
• Experience developing component libraries and library management
• Experience reworking existing physical and soft PCB designs into different form factors
• Experience with a variety of board types, including high density and high layer count (greater than 16) digital designs, power electronics, flex circuits, and RF circuits
• Experience with high-density interconnect (HDI) and thicker boards (greater than 1.6mm)
• Experience with high-speed digital interfaces and controlled impedance routing requirements like USB, PCIe, Ethernet, SERDES, and DDR memory
• Strong communication skills
• Currently possesses and is able to maintain an active U.S. Top Secret SCI security clearance with Full Scope Polygraph

PREFERRED QUALIFICATIONS

• 5+ years of professional experience in PCB design
• Familiarity with other design tools such as OrCAD, Cadence, or Allegro
• Experience in applying relevant IPC standards, CID, CID+ certification
• Experience with high-pin count packages (FPGA fanout)
• Experience with signal and power integrity rules and their effect on layout

ABOUT THE JOB

Anduril is seeking a Chief Engineer to lead the design, development, and technical integration for a product line of critical network capabilities. This role is not just about leading; it's about re-envisioning the technical future of secure, resilient, and high-bandwidth communication for all of Anduril and the DoW’s autonomous platforms and integrated defense solutions. A successful candidate will not only have a strong technical background, but must also possess a vision for leadership that embraces Anduril’s mission to disrupt the defense technology ecosystem across technical and programmatic domains.

As Chief Engineer, you will be responsible for the end-to-end technical success and architectural coherence of complex, multi-disciplinary network systems. You will operate at the intersection of complex engineering challenges in embedded systems, networking protocols, mechanical integration, and strategic program execution. You will work directly with our most senior technical leaders, program managers, and customers to define, build, and deliver cutting-edge networking capabilities that impact national security.

WHAT YOU’LL DO

• Technical Vision & Architecture: Own and define the comprehensive technical architecture, design principles, and engineering roadmap for complex, distributed network systems. Ensure technical consistency, scalability, performance, and cyber-resilience across all technical domains (embedded software, UI/UX design, network protocols, hardware integration, ruggedized mechanical designs).
• System Integrity & Risk Management: Serve as the ultimate technical arbiter, ensuring the integrity, reliability, security, and survivability of our network systems in contested and high security environments. Proactively identify and mitigate technical risks related to performance, security, and physical robustness.
• Engineering Leadership & Mentorship: Provide decisive technical leadership and guidance to large, multi-disciplinary engineering teams (Mechanical, Electrical, Software) to deliver high quality products that can be manufactured at scale. Foster a culture of technical excellence, rigorous design, rapid iteration, and continuous improvement, ensuring seamless collaboration across disciplines.
• Strategic Technical Guidance: Translate strategic objectives and customer needs into actionable technical requirements and solutions. Drive trade studies, technology selections, and critical design decisions related to network topology, protocol selection, embedded hardware integration, power management, thermal management, and software-defined networking.
• Stakeholder Engagement: Act as the primary technical interface with internal stakeholders (Product, Program Management, Executive Leadership) and external stakeholders (customers, partners, regulatory bodies), clearly articulating complex technical concepts, challenges, and solutions for network capabilities.
• Rapid Prototyping, Fielding, and Scaled Production: Drive aggressive timelines for design, development, integration, and testing of network systems, supporting rapid prototyping, fielding, and scaled production of operational capabilities for defense applications.

REQUIRED QUALIFICATIONS

• 15+ years of progressive experience in complex network systems engineering, R&D, and product development, with a significant portion in a leadership or Chief Engineer capacity for multi-disciplinary systems.
• Deep and broad technical expertise across network system design and implementation, encompassing significant experience in at least two of the following areas, with a strong understanding of the others:
  • Software Engineering: Network protocols (e.g., IP, routing, transport layer), distributed systems, embedded networking, real-time operating systems, cybersecurity for networks, data link layer implementation.
  • Electrical Engineering: Digital communications, power systems for ruggedized network nodes, high-speed digital design for embedded processors, PCB design for communication systems.
  • Mechanical Engineering: Ruggedized enclosure design, thermal management for radios and processors, vibration/shock mitigation, integration of network hardware onto various platforms (airborne, ground, maritime, soldier-worn).
  • Cross-disciplinary systems integration experience, particularly bridging the gap between hardware and software for robust network performance in demanding environments.
• Proven ability to define, architect, and lead the development of highly complex, integrated network systems from concept through deployment and sustainment.
• Exceptional leadership skills with a track record of building, mentoring, and inspiring high-performing multi-disciplinary technical teams in fast-paced, challenging environments.
• Demonstrated experience in strategic technical planning, roadmapping, and managing technical debt while delivering on aggressive schedules for networking products.
• Strong problem-solving acumen, with the ability to break down highly ambiguous technical challenges related to network performance and resilience, and drive to practical, innovative solutions.
• Excellent communication, presentation, and interpersonal skills to effectively convey complex technical concepts to diverse audiences, including executives, customers, and technical teams across different engineering disciplines.
• Bachelor's degree in Computer Science, Electrical Engineering, Mechanical Engineering, Aerospace Engineering, Robotics, or a related technical field. Master's or Ph.D. preferred.
• Minimum Secret Security Clearance required. (Active TS/SCI strongly preferred).

PREFERRED QUALIFICATIONS

• Background in cybersecurity for network infrastructure and resilience against near-peer nation state cyber risks.
• Experience with network modeling, simulation, and analysis tools for predicting performance in diverse environments.
• Demonstrated ability to drive technical decisions involving significant financial and programmatic impact for network system development.
• Familiarity with military communication standards and requirements (e.g., Joint All-Domain Command and Control (JADC2) concepts).

ABOUT THE TEAM

Anduril’s Air and Ground Deterrence (AGD) Division develops integrated robotic systems designed to provide multi-domain situational awareness and force protection across land, sea, and air. From detection to tracking, identification, deterrence, and defeat, our family of networked sensors and effectors enables our customers to rapidly detect and identify potential threats. close the kill chain against a broad range of Unmanned Aerial System (UAS) threats.

Working across product, engineering, sales, logistics, operations, and mission success, the multidisciplinary Sentry Hardware team with AGD serves as the key system integrator of the Anduril Sentry Family of Systems (FoS). In particular, the Sentry Electrical Engineering Team drives end-to-end development, from electrical architecture and ruggedized hardware design to verification, integration, and test, ensuring scalable, production and mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and other key stakeholders.

ABOUT THE JOB

The Sentry Engineering team builds hardware products and systems that leverage artificial intelligence to provide highly accurate, persistent autonomous awareness across land, sea and air. With an AI-enabled edge processing, continuous 360 pan / tilt capability, and a variety of radars and sensors, Sentry can autonomously identify, detect, and track objects of interest to bring increased awareness to borders, military bases, oil and gas pipelines, airports and other critical infrastructure.

We are looking for an Electrical Engineer to join our rapidly growing team in Irvine, CA. This role will own rapidly developed, ruggedized electronics design in addition to scaling legacy design concepts to support full-rate production. In this role, you will partner with our Architecture and Product Management team to help drive system requirements prior to owning full PCB and/or electrical system design. This will require identifying high risk areas, creating and validating electronics designs for embedded compute and/or power systems, and testing for long term-reliability while considering manufacturability and testability in the design.

If you are someone who enjoys designing mission-critical electrical circuit cards and integrated systems with the freedom to drive product development from often undefined requirements then this role is for you.

WHAT YOU’LL DO

• Take ownership as the main point of contact for electrical integration activities.
• Provide hands on and in-field support of prototype and production level product.
• Collaborate with mechanical engineers to optimize selection, design and integration of high power components, modules and distribution.
• Trade-off component and module selections against size, weight, power and EMC requirements.
• Collaborate with design team to achieve reliability goals at a system level in context of concepts of operation.

REQUIRED QUALIFICATIONS

• Minimum 5 years of professional experience
• Self starter with the ability to design digital & analog electronics from concept and functional prototype, to production ready product.
• Ability to troubleshoot existing hardware to find root cause of issues and implement improvements to improve the design.
• Develop clear documentation to capture design requirements, specifications, test coverage, and test reports.
• Complete full cycle PCB design including collecting requirements, schematic design, component selection, completion of layout, bring-up, test, debug, validation, characterization, and integration with the system.
• Work closely with other mechanical, software, firmware, and test engineers to deliver fully functional products.
• Work in a fast-paced environment supporting new developments, active deployments, and customer operated hardware.
• Concurrently manage involvement in multiple projects at various stages.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

PREFERRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 5+ years of experience designing, testing and troubleshooting complex board designs and products.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with switch mode power supply design and testing.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Exceptional organization and communication skills (both written and oral).
• Proficient with Altium Designer or equivalent electronic design automation design tools.
• Proficiency with scripting languages (Python, Matlab, etc.)
• Ability to root cause Full stack HLOS application to hardware component level issues.

ABOUT THE TEAM

Anduril’s Air and Ground Deterrence (AGD) Division develops integrated robotic systems designed to provide multi-domain situational awareness and force protection across land, sea, and air. From detection to tracking, identification, deterrence, and defeat, our family of networked sensors and effectors enables our customers to rapidly detect and identify potential threats. close the kill chain against a broad range of Unmanned Aerial System (UAS) threats.

Working across product, engineering, sales, logistics, operations, and mission success, the multidisciplinary Sentry Hardware team with AGD serves as the key system integrator of the Anduril Sentry Family of Systems (FoS). In particular, the Sentry Electrical Engineering Team drives end-to-end development, from electrical architecture and ruggedized hardware design to verification, integration, and test, ensuring scalable, production and mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and other key stakeholders.

ABOUT THE JOB

The Sentry Engineering team builds hardware products and systems that leverage artificial intelligence to provide highly accurate, persistent autonomous awareness across land, sea and air. With an AI-enabled edge processing, continuous 360 pan / tilt capability, and a variety of radars and sensors, Sentry can autonomously identify, detect, and track objects of interest to bring increased awareness to borders, military bases, oil and gas pipelines, airports and other critical infrastructure.

We are looking for an Electrical Engineer to join our rapidly growing team in Irvine, CA. This role will own rapidly developed, ruggedized electronics design in addition to scaling legacy design concepts to support full-rate production. In this role, you will partner with our Architecture and Product Management team to help drive system requirements prior to owning full PCB and/or electrical system design. This will require identifying high risk areas, creating and validating electronics designs for embedded compute and/or power systems, and testing for long term-reliability while considering manufacturability and testability in the design.

If you are someone who enjoys designing mission-critical electrical circuit cards and integrated systems with the freedom to drive product development from often undefined requirements then this role is for you.

WHAT YOU’LL DO

• Take ownership as the main point of contact for electrical integration activities.
• Provide hands on and in-field support of prototype and production level product.
• Collaborate with mechanical engineers to optimize selection, design and integration of high power components, modules and distribution.
• Trade-off component and module selections against size, weight, power and EMC requirements.
• Collaborate with design team to achieve reliability goals at a system level in context of concepts of operation.

REQUIRED QUALIFICATIONS

• Minimum 5 years of professional experience
• Self starter with the ability to design digital & analog electronics from concept and functional prototype, to production ready product.
• Ability to troubleshoot existing hardware to find root cause of issues and implement improvements to improve the design.
• Develop clear documentation to capture design requirements, specifications, test coverage, and test reports.
• Complete full cycle PCB design including collecting requirements, schematic design, component selection, completion of layout, bring-up, test, debug, validation, characterization, and integration with the system.
• Work closely with other mechanical, software, firmware, and test engineers to deliver fully functional products.
• Work in a fast-paced environment supporting new developments, active deployments, and customer operated hardware.
• Concurrently manage involvement in multiple projects at various stages.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

PREFERRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 5+ years of experience designing, testing and troubleshooting complex board designs and products.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with switch mode power supply design and testing.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Exceptional organization and communication skills (both written and oral).
• Proficient with Altium Designer or equivalent electronic design automation design tools.
• Proficiency with scripting languages (Python, Matlab, etc.)
• Ability to root cause Full stack HLOS application to hardware component level issues.

ABOUT THE TEAM

Anduril's Space team is dedicated to expanding our AI-powered capabilities into the final frontier, enhancing Space Domain Awareness, Space Control, and Command and Control for U.S. military and allied partners. We're developing fully integrated hardware and software systems, including Lattice for Space Missions and modular payloads, to address growing threats in space and ensure our Guardians maintain a decisive advantage in this contested warfighting domain.

ABOUT THE JOB

This position involves working in a multi-disciplinary environment on the design, fabrication and flight testing of advanced payloads for Space. We are interested in candidates that are excited to work on new projects from conceptualization through production.

WHAT YOU’LL DO

• Work with EE Manager and Systems Engineer to develop requirements
• Create a Block Diagram of the proposed design
• Make a Schematic for the design in Altium
• Simulation of the circuit design
• Perform Layout or work with a Layout Engineer to design the PCB
• Generate Drawings and Documentation for the design
• Perform Design Validation Testing (DVT) on the finished PCBA
• Support testing and test development
• Debug support

REQUIRED QUALIFICATIONS

• 5+ years of relevant experience
• B.S. in Electrical or Computer Engineering or equivalent
• Team player with strong organization and communication skills
• Experience with schematic design
• Experience performing board bring-up
• Experience performing schematic reviews
• Ability to work independently under tight deadlines with minimal supervision, delivering quality results in fast-paced environments.
• Experience developing checklists and procedures for developed designs
• Experience developing technical drawings and documentation
• Experience with power circuit design and implementation
• Familiarity with lab equipment (DMM, O-Scope, Power Supply, etc)
• Must be authorized to work in the United States

PREFERRED QUALIFICATIONS

• Schematic and layout design in Altium
• Experience performing PDN analysis
• Experience with differential pair routing and debugging
• Proficient in soldering
• Knowledge of common communication busses (I2C, SPI, UART, RS-422/485, Eth, PCIe)
• 2+ years of experience in New Space

ABOUT THE TEAM

Anduril's Space team is dedicated to expanding our AI-powered capabilities into the final frontier, enhancing Space Domain Awareness, Space Control, and Command and Control for U.S. military and allied partners. We're developing fully integrated hardware and software systems, including Lattice for Space Missions and modular payloads, to address growing threats in space and ensure our Guardians maintain a decisive advantage in this contested warfighting domain.

ABOUT THE JOB

This position involves working in a multi-disciplinary environment on the design, fabrication and flight testing of advanced payloads for Space. We are interested in candidates that are excited to work on new projects from conceptualization through production.

WHAT YOU’LL DO

• Work with EE Manager and Systems Engineer to develop requirements
• Create a Block Diagram of the proposed design
• Make a Schematic for the design in Altium
• Simulation of the circuit design
• Perform Layout or work with a Layout Engineer to design the PCB
• Generate Drawings and Documentation for the design
• Perform Design Validation Testing (DVT) on the finished PCBA
• Support testing and test development
• Debug support

REQUIRED QUALIFICATIONS

• 12+ years of relevant experience
• B.S. in Electrical or Computer Engineering or equivalent
• Team player with strong organization and communication skills
• Experience with schematic design
• Experience performing board bring-up
• Experience performing schematic reviews
• Ability to work independently under tight deadlines with minimal supervision, delivering quality results in fast-paced environments.
• Experience developing checklists and procedures for developed designs
• Experience developing technical drawings and documentation
• Experience with power circuit design and implementation
• Familiarity with lab equipment (DMM, O-Scope, Power Supply, etc)
• Must be authorized to work in the United States

PREFERRED QUALIFICATIONS

• Schematic and layout design in Altium
• Experience performing PDN analysis
• Experience with differential pair routing and debugging
• Proficient in soldering
• Knowledge of common communication busses (I2C, SPI, UART, RS-422/485, Eth, PCIe)
• 4+ years of experience in New Space

ABOUT THE TEAM

Anduril's Space team is dedicated to expanding our AI-powered capabilities into the final frontier, enhancing Space Domain Awareness, Space Control, and Command and Control for U.S. military and allied partners. We're developing fully integrated hardware and software systems, including Lattice for Space Missions and modular payloads, to address growing threats in space and ensure our Guardians maintain a decisive advantage in this contested warfighting domain.

ABOUT THE JOB

This position involves working in a multi-disciplinary environment on the design, fabrication and flight testing of advanced payloads for Space. We are interested in candidates that are excited to work on new projects from conceptualization through production.

WHAT YOU’LL DO

• Work with EE Manager and Systems Engineer to develop requirements
• Create a Block Diagram of the proposed design
• Make a Schematic for the design in Altium
• Simulation of the circuit design
• Perform Layout or work with a Layout Engineer to design the PCB
• Generate Drawings and Documentation for the design
• Perform Design Validation Testing (DVT) on the finished PCBA
• Support testing and test development
• Debug support

REQUIRED QUALIFICATIONS

• 8+ years of relevant experience
• B.S. in Electrical or Computer Engineering or equivalent
• Team player with strong organization and communication skills
• Experience with schematic design
• Experience performing board bring-up
• Experience performing schematic reviews
• Ability to work independently under tight deadlines with minimal supervision, delivering quality results in fast-paced environments.
• Experience developing checklists and procedures for developed designs
• Experience developing technical drawings and documentation
• Experience with power circuit design and implementation
• Familiarity with lab equipment (DMM, O-Scope, Power Supply, etc)
• Must be authorized to work in the United States

PREFERRED QUALIFICATIONS

• Schematic and layout design in Altium
• Experience performing PDN analysis
• Experience with differential pair routing and debugging
• Proficient in soldering
• Knowledge of common communication busses (I2C, SPI, UART, RS-422/485, Eth, PCIe)
• 3+ years of experience in New Space

ABOUT THE TEAM

The Intelligence Systems team is focused on positioning Anduril as a lead provider of specialized engineering and products for Intelligence Community (IC) customers. We work within the IC to understand their requirements, shape their concepts of operation, and deliver exquisite capability across their problem set. We aim to develop and deploy critically needed capabilities that address our customers’ most pressing national security requirements.

ABOUT THE JOB

We are seeking a Senior RF Test Engineer specializing in EMI/EMC to join our expanding team in Santa Ana, CA. This role focuses on leading EMI/EMC (Electromagnetic Interference/Electromagnetic Compatibility) test design initiatives for our cutting-edge products.

WHAT YOU’LL DO

• Evaluation of high-speed digital, precision analog, RF, and high-power designs for EMI/EMC compliance.
• Work with design teams to establish manufacturing EMC test limits based on development characterization tests.
• Conduct tests to assess electromagnetic emissions and susceptibility performance.
• Troubleshoot and resolve EMI/EMC performance issues at the component level.
• Work in a fast-paced environment, having to juggle multiple concurrent projects and customers.
• Stay updated on military and aerospace EMI/EMC standards (MIL-STD-461, DO-160, MIL-STD-704)
• Ability to generate requirements and work cross functionally with Mechanical, Thermal, Validation engineers
• Factory and manufacturing support from a design, DfX, quality, debug, and failure analysis perspective

REQUIRED QUALIFICATIONS

• 8+ years of professional experience in designing hardware products for EMI/EMC compliance.
• Knowledge of EMI/EMC Test Equipment such as spectrum analyzers, antennas, LISN, NF Probes, GTEM & Anechoic Chamber etc.
• Knowledgeable with analog and digital circuit design and PCB Layout techniques to meet mechanical, electrical, EMI/EMC, and manufacturing requirements.
• Ability to read and interpret schematics and apply best practices appropriate for each design.
• Ability to design / edit test automation software such as LabVIEW using multiple architectures
• Familiarity with standard interfaces such as MIPI, DP, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, SOC devices and technologies.
• Ability to determine work priorities based on broad direction from management.
• Excellent communication skills and ability to work effectively with others.
• Ability to work within our company and team culture.
• Active U.S. Secret security clearance

WHAT YOU'LL DO

• Design embedded electronics from concept to functional prototype, including hardware selection, schematic & PCB design, board bring-up, and system level integration
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both lab equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools
• Work with modern SoCs and networking hardware to build Anduril platforms
• Work closely with firmware/software engineers for processor/peripheral selection, board bring up, and troubleshooting.
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products
• Work in a fast-paced environment supporting new developments, active deployments, and customer operated hardware
• Concurrently manage involvement in multiple projects at various stages

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering
• 8+ years of experience designing, testing, and troubleshooting complex hardware, embedded systems, and products
• Demonstrated experience with multi-gigabit SERDES, DDR memory busses, Ethernet MAC and PHY interfaces, FPGAs, and common communication busses like SPI and I2C
• Experience with microprocessor and microcontroller selection, configuration, and interfacing
• Experience with component, schematic capture, high speed board design, and guiding PCB layout.
• Competence with test equipment such as oscilloscopes, logic analyzers, debuggers, current-probes, and automation of tests
• Familiarity with product development processes and tools
• Knowledge of embedded software development, including use of timers, interrupts, hardware peripherals such as SPI controllers and ADCs
• Knowledge of embedded Linux development, including device trees, hardware drivers, bootloaders, and basic Unix/Linux tools
• Exceptional organization and communication skills (both written and oral)
• Proficient with Altium Designer or equivalent electronic design tools
• Familiar with common programming languages like Python for test automation.
• Must be able to obtain and hold a U.S. Top Secret Security Clearance

PsiQuantum’s mission is to build the first useful quantum computers—machines capable of delivering the breakthroughs the field has long promised. Since our founding in 2016, our singular focus has been to build and deploy million-qubit, fault-tolerant quantum systems. 

Quantum computers harness the laws of quantum mechanics to solve problems that even the most advanced supercomputers or AI systems will never reach. Their impact will span energy, pharmaceuticals, finance, agriculture, transportation, materials, and other foundational industries. 

Our architecture and approach is based on silicon photonics. By leveraging the advanced semiconductor manufacturing industry—including partners like GlobalFoundries—we use the same high-volume processes that already produce billions of chips for telecom and consumer electronics. Photonics offers natural advantages for scale: photons don’t feel heat, are immune to electromagnetic interference, and integrate with existing cryogenic cooling and standard fiber-optic infrastructure. 

In 2024, PsiQuantum announced government-funded projects to support the build-out of our first utility-scale quantum computers in Brisbane, Australia, and Chicago, Illinois. These initiatives reflect a growing recognition that quantum computing will be strategically and economically defining—and that now is the time to scale. 

PsiQuantum also develops the algorithms and software needed to make these systems commercially valuable. Our application, software, and industry teams work directly with leading Fortune 500 companies—including Lockheed Martin, Mercedes-Benz, Boehringer Ingelheim, and Mitsubishi Chemical—to prepare quantum solutions for real-world impact. 

Quantum computing is not an extension of classical computing. It represents a fundamental shift—and a path to mastering challenges that cannot be solved any other way. The potential is enormous, and we have a clear path to make it real. 

Come join us. 

Job Summary:

The mission of PsiQuantum's Principal Hardware Design Engineer role is to support the Electronics team by owning hardware designs integral to the underlying system of the quantum computer. This engineer will collaborate in cross-functional teams of thermal, mechanical, firmware, optical engineers. The designs will meet the requirements of the overall system architecture and physical framework of the quantum computer.

Responsibilities:

• Define, Design and deliver production ready high-speed embedded hardware systems.
• Design, create schematics, and oversee PCB layout of analog and digital circuitry consisting of but not limited to high-speed transceivers, 10+ Gbps electrical and optical data links, FPGA's, microcontrollers, clock distribution, and power distribution.
• Ensure signal integrity and EMI suppression is accounted for in all designs.
• Design and create test set-ups for testing of electro-optic modules.
• Characterize, optimize, and debug analog, digital, and electro-optic circuitry using equipment such as mixed signal & sampling oscilloscopes, vector network analyzers, signal generators, multimeters, DC power supplies.
• Develop software to drive measurements.
• Analyze data and extract key performance parameters.
• Maintain detailed documentation of hardware designs, test results, and design changes.
• Software tools:
  • Orcad Schematic Capture and Allegro PCB Layout
  • C++, Python, RTL (VHDL or Verilog)
  • Keysight PathWave ADS
  • Microsoft Office

Experience/Qualifications:

• 7 years of experience with a Master Degree.
• 9-12 years of experience with a B.S. Degree.
• Results oriented.
• Delivers on commitments.
• Attention to detail.
• Data-driven in decision-making.
• Strong problem-solving skills.
• Proven team player with an ability to work effectively across departments, sites, time zones in direct and matrix team environments.
• Excellent verbal and written communication skills with an ability to communicate effectively to a variety of audiences ranging from senior leadership and technical experts to entry-level staff.

PsiQuantum provides equal employment opportunity for all applicants and employees. PsiQuantum does not unlawfully discriminate on the basis of race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, national origin, ancestry, citizenship, age, physical or mental disability, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, or any other basis protected by applicable laws.

Note: PsiQuantum will only reach out to you using an official PsiQuantum email address and will never ask you for bank account information as part of the interview process. Please report any suspicious activity to recruiting@psiquantum.com.

We are not accepting unsolicited resumes from employment agencies.

Graphcore is a globally recognised leader in Artificial Intelligence computing systems. The company designs advanced semiconductors and data centre hardware that provide the specialised processing power needed to drive AI innovation, while delivering the efficiency required to support its broader adoption.   

As part of the SoftBank Group, Graphcore is a member of an elite family of companies responsible for some of the world’s most transformative technologies. We are opening a new AI Engineering Campus in Austin, which will play a central role in Graphcore's work building the future of AI computing. 

The Electrical Engineer will play a pivotal role in designing innovative hardware systems for AI/ML applications. We are seeking a motivated Electrical Engineer with 2–4 years of experience in schematic capture, PCB design, and server hardware development. This role includes close collaboration with multiple partners to drive designs from concept through mass production. The ideal candidate is comfortable working across organizational boundaries, ensuring design quality, manufacturability, and on-time delivery in a fast-paced environment.

Responsibilities:

• Develop and maintain electrical schematics for various printed circuit assemblies
• Design and layout multilayer PCBs
• Work closely with partners to review designs, provide technical guidance, and ensure alignment with system requirements
• Drive design for manufacturability (DFM), design for assembly (DFA), and design for testability (DFT)
• Support server subsystem integration
• Participate in design reviews
• Support prototype builds, board bring-up, debugging, and validation
• Track and resolve design issues, including root cause analysis and corrective actions
• Ensure proper documentation, revision control, and engineering change management (ECO/ECN processes)

Requirements:

• Bachelor’s degree in electrical engineering
• 2–4 years of experience in schematic capture and PCB design
• Proficiency with PCB design and schematic tools
• Strong understanding of analog and digital circuit design fundamentals
• Experience with multilayer PCB layout
• Experience with lab equipment (oscilloscope, multimeter, logic analyzer)

Differentiators:

• Experience with server platforms or data center hardware
• Knowledge of power delivery network (PDN) design for high-power systems
• Familiarity with signal integrity and power integrity analysis tools
• Experience with compliance and validation (EMI/EMC, safety, regulatory)
• Exposure to global manufacturing environments and supply chain coordination
• Familiarity with PLM systems and change management workflows

We welcome people of different backgrounds and experiences and are committed to building an inclusive work environment that makes Graphcore a great home for everyone. We are an equal opportunity employer and want to build a work environment where everyone is happy, productive and respectful so they can do their best work. If you have a disability or additional need that requires accommodation, just let us know.

Basic Qualifications

• BS / MS in Electrical, Electronics, Compute, Aerospace Engineering, or equivalent
• Experienced in automotive industry. (TIER1/TIER2 preferred)
• Experience in embedded electrical designs
• Familiar with EMI/EMC design, test and troubleshooting
• Familiar with electrical architecture topologies, Functional Safety (ISO 26262) and other industry standards
• Solid understanding of system/component design
• Familiar with vehicle bus, e.g. ETH/CAN/LIN/LVDS, communication protocols and troubleshooting tools
• Experience in thermal management of ECU embedded electronics
• Ability to participate and lead schematic and layout design reviews
• Good knowledge of state-of-the-art hardware systems, software tools and algorithms for interfaces required for actuators, firmware development, in-vehicle bus architectures, in-vehicle CPU/GPU/NPU computing platforms, image and audio signal processors, connectivity
• Knowledge of ADAS, Infotainment Systems and Zonal Architectures, Software defined vehicles
• Being able to support more than one expertise domain is a plus
• Power Integrity and Signal Integrity experience is a plus
• Experience in an architectural hardware/system role is a plus

Should have experience in:

• Min 2 Yrs. Schematic and Layout design
• Experience in Altium is a big plus
• High complex multilayer layout design
• PCB design rules
• PCB to Mechanical interface and constraints
• HW debugging, investigations, problem solving with electrical lab equipment

ABOUT THE TEAM: 

Our products are complex, integrated hardware-software products in which state-of-the-art electrical systems for power, compute, communications, and controls play a critical, differentiating role. We have successfully delivered a dozen products and have another dozen in the works. We need a senior, experienced, electrical engineering leader to oversee the team developing the electrical subsystems for these products. You will own a large, multi-discipline electrical team and will be responsible for independently developing and executing a comprehensive technical vision across our products. You will be a key senior leader and will partner with other engineering and production teams to make your vision a reality. You will independently lead and manage your team and will be responsible for resource planning, hiring, and mentoring your team members. Your vision is key to the growth and success of our products and will have a meaningful impact on U.S. military command and control capabilities.

WHAT YOU’LL DO:

Our products are complex, integrated hardware-software products in which state-of-the-art electrical systems for power, compute, communications, and controls play a critical, differentiating role. We have successfully delivered a dozen products and have another dozen in the works. We need a senior, experienced, electrical engineering leader to oversee the team developing the electrical subsystems for these products. You will own a large, multi-discipline electrical team and will be responsible for independently developing and executing a comprehensive technical vision across our products. You will be a key senior leader and will partner with other engineering and production teams to make your vision a reality. You will independently lead and manage your team and will be responsible for resource planning, hiring, and mentoring your team members. Your vision is key to the growth and success of our products and will have a meaningful impact on U.S. military command and control capabilities.

You will:

• Oversee a 40+ member electrical engineering department, including electrical architecture, PCB design, harness design, firmware development, system integration, and test
• Own the design and integration of electrical subsystems for multiple products simultaneously
• Drive the transition of electrical designs from prototype to production
• Independently lead people management functions for the entire team, including overseeing personnel growth, resource planning, and hiring
• Review electrical engineering designs and oversee the definition and implementation of best practices
• Partner with mechanical, systems, manufacturing, and supply chain leaders to integrate electrical designs into products and repeatably build them in production
• Manage electrical engineering resources across current and emergent needs to maintain on-time delivery and reliable execution of program requirements
• Author and drive a compelling vision for our electrical engineering roadmap that helps to guide our products into the next generation of features
• Partner with business leaders to triage limited resources against new opportunities, using your business acumen to inform product planning

Qualifications:

• Proven track-record of owning the design and delivery of electrical systems for complex hardware products
• Demonstrated ability to independently design and integrate electrical components into production scale products
• Deep technical fluency and passion for engineering details
• Experience working on both high-power (>100kW) and low power (<20W) ground or automotive systems
• Past leadership of large, multi-discipline, electrical engineering teams
• Strong people management and hiring skills
• Success working in start-up, scale-up, or other high-ambiguity environments
• Business acumen and the ability to use financial metrics to guide engineering decisions
• 10+ years overseeing the development of complex electrical systems
• Bachelors degree or higher in electrical engineering
• U.S. Security Clearance eligible

ABOUT THE TEAM

Anduril’s Maritime Division has assembled a diverse team of experts in software, robotics, artificial intelligence, sensor fusion, and data analysis to create software and hardware solutions that radically evolve the capabilities of our customers. We are fielding the next generation of autonomous systems to tackle the extremely challenging industry demands of maritime operations. Anduril has brought to market a unique, ultra-long-range, full-ocean-depth underwater vessel platform and a completely refreshed maritime vehicle and flexible manufacturing architecture that scales from "small" to "extra-large" vehicle sizes. Today, Anduril is executing on billion-dollar contracts while simultaneously performing Robot-as-a-Service (RaaS) AUV operations.

We are continuing to expand our product portfolio, now moving into the surface maritime domain. Products like Dive-XL, Dive-LD, Copperhead, Seabed Sentry, and surface products in the pipeline will create a system-of-systems that enable a multitude of autonomous missions across all maritime domains. If you are passionate about solving problems that have real impact and working on systems that directly contribute to achieving national strategic priorities, we want you to join Anduril’s Maritime Division and help us build the future of defense capability.

ABOUT THE JOB

We are seeking a highly motivated and experienced Electrical Engineer to aid the technical development of a holistic support system for service, maintenance, deployment, launch, and recovery of the Copperhead family of vehicles. This role involves close collaboration with electrical and systems teams as well as customer representatives to ensure effective support and execution of Copperhead missions in a variety of rugged environments.

As a key member of our Quincy, MA based team, the Electrical Engineer will work closely with the program leadership and a wide spectrum of cross-departments focused on solving hard problems and changing the trajectory of the industry. This position will be responsible for designing and supporting the integration of various electrical subsystems, supporting testing efforts, and ensuring overall system performance meets the required specifications and standards.

Join our dynamic team and help us build the next generation of autonomous maritime systems!

WHAT YOU'LL DO

• Develop electrical schematics, power system single line diagrams, system interconnect diagrams and define wire harnesses that connect electronic equipment within a subsystem and between subsystems
• Integrate a variety of existing electrical sub-systems to provide novel capability with an eye towards maintaining commonality with other Anduril Maritime systems.
• Design electrical interfaces and enclosures for integration of sensors, and peripheral equipment for autonomous systems
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both test equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools
• Develop subsystems (sensors, interfaces, power management, and networking) for bespoke capabilities
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products
• Work in a fast-paced environment balancing schedule against cost and performance parameters
• Conduct peer-level and cross-discipline design reviews, perform requirements analysis, and plan system verification to ensure compliance with project goals and industry standards

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent with 4+ years of experience designing, testing, and troubleshooting electrical systems
• Knowledge of modern analog and digital electronics and electronic circuits
• Experience developing schematics, interconnect diagrams, and wiring harnesses
• Experience with PCB design including collecting requirements, schematic design (Altium, Eagle), component selection, supervision or completion of layout, bring-up, test, debug and system integration
• Familiarity with networking and standard interfaces such as Ethernet, CAN, I2C, USB, MODBUS, ProfiNet, etc
• Competence with test equipment such as multi-meter, oscilloscopes, logic analyzers, and automation of tests
• Experience with electro-mechanical and electrical design concepts
• Experience in design for signal integrity / power integrity
• Experience in designing and integrating low-power electronics
• Experience in fieldable system design
• High-ownership and a bias toward action – if you see a problem, you want to solve and fix it
• Eligible to obtain and maintain an active U.S. Secret security clearance
• Ability to travel 5%

PREFERRED QUALIFICATIONS

• Experience designing electronic circuits and hardware kits
• Experience designing electrical and power systems for autonomous systems
• Familiarity with software development processes and tools such as git, Github, JIRA, etc
• Comfortable in conducting worst case circuit or uncertainty and fault analysis
• Experience with high reliability and/or autonomous systems
• Familiarity with designing for rugged environments

ABOUT THE TEAM 

The Anduril Imaging team develops state-of-the-art imaging systems across both hardware and software, deployed to tackle the most significant security challenges of America and its allies.  The team is heavily involved in utilizing computer vision, perception, electro-optical, infrared, and sensor data to give our war fighters and allies an advantage.   

ABOUT THE JOB 

The Imaging team is seeking an Embedded Software Engineer to help design a new product lines. In this role, you will work closely with an interdisciplinary technical team to define, complete the design and analysis, build prototypes leading to ground and flight testing, and mature the prototypes into products. 

WHAT YOU’LL DO

• Design firmware for embedded hardware, from concept to functional prototype, board bring-up, and system level integration
• Write C/C++ for ARM processers in modern FPGAs, SoCs, and SoMs
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both lab equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools
• Work closely with hardware and software engineers for component selection, troubleshooting, and product support
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products
• Develop firmware across multiple products at various stages of their development cycle

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering, Computer Engineering, or equivalent
• 5+ years of experience developing firmware for for embedded processors using C/C++
• Experience with configuration control system like (eg Git , Github etc..)
• Experience with testing, supporting, and troubleshooting complex hardware, embedded systems, and products
• Competence with test equipment such as oscilloscopes, logic analyzers, debuggers, current-probes, and automation of tests
• Eligible to obtain and maintain an active U.S. Secret security clearance 

PREFERRED QUALIFICATIONS 

• 5+ years of experience FPGA devices
• Demonstrated experience designing for common communication busses like SPI, I2C, CAN
• Embedded software development experience with the use of timers and interrupts
• Experience with developing HDL firmware for Xilinx FPGA devices and embedded real-time systems with C/C++
• Experience with component selection, schematic capture, high speed board design, and PCB layout
• Knowledge of embedded Linux development, including device trees, hardware drivers, bootloaders, and basic Unix/Linux tools
• Familiar with common programming languages like Python and MATLAB
• Familiarity with infrared image sensor technology

Team Description:

We build the electrical systems that make high-bandwidth brain–computer interfaces possible. This includes neural signal acquisition and stimulation to wireless power delivery, embedded processing, and system integration—all within devices small enough to be implanted in the human body and efficient enough to operate under strict thermal and power constraints. Our work sits at the intersection of analog, RF, digital, and biological systems. Many problems in this space do not present clean abstractions or clear failure modes. Success often depends on careful measurement, iteration, and engineering judgment across multiple interacting systems.

Job Description and Responsibilities:

We are looking for an experienced, hands-on electrical engineer for implant electronics board design, integration with our custom chips, testing, and quality control. You will have the opportunity to contribute to advanced projects, not only work on incremental changes, and be an integral member of a small, fast-moving team. You will be working on all phases of board design (part selection, schematic design, layout, and bring-up) as well as collaborating closely with chip designers, firmware engineers, mechanical engineers, and microfabrication experts for system integration.

• Utilize electrical engineering fundamentals and best system design practices to build on your ability to deliver high-performant, reliable, and manufacturable extremely size-constraint systems
• Gain understanding of all phases of system and board design, from system definition to part selection, schematic design, layout, bring up, and design verification
• Contribute to R&D investigations and experiments to demonstrate feasibility of new technology for the implant and the charger
• Gain experience working cross functionally to ensure successful systems integration
• Contribute to system improvements that decrease latency and increase battery life, reliability, and safety
• Develop ability to design and deploy systems for implant-charger hardware in the loop testing, and manufacturing line quality control

Required Qualifications: 

• Strong EE fundamentals
• Experience designing PCBs for low power and size constrained applications
• Experience with PCB CAD tools (Altium, Eagle, KiCad, Allegro)
• Experience with sensors, power management, and signal/power integrity
• Comfortable with common communication protocols (SPI, UART, I2C, etc.)
• Comfortable with lab equipment (oscilloscope, VNA, etc.)
• Basic C and Python programming skills

Preferred Qualifications:

• Experience with firmware development for embedded systems (C/C++)
• Experience with wireless systems (BLE, WIFI, Zigbee)
• Experience building and bringing-up MCUs or FPGA
• Proficiency with ME CAD tools (Solidworks, AutoCAD)
• Experience with analog circuit design

Expected Compensation:

The anticipated hourly rate for this position is listed below.

California Hourly Flat Rate:
$35/Hr USD

Team Description:

The Convoy team, a specialized group within the Robot Mechanical Engineering team, is working on developing a first-of-its-kind brain-controlled assistive robotic arm (ARA). Our focus is on developing high-dimensional neural control of hardware, specifically robotic arms and hands. We design and integrate robotics systems, work directly with our clinical trial participants, and collaborate cross-functionally with hardware, software, electrical, and BCI engineers. We believe this work may be one of the best and most advanced paths to giving physical independence back to users with unmet medical needs.

Job Description and Responsibilities:

As a Mechanical & Robotics Engineer at Neuralink, you will design and produce hardware solutions for our assistive robotic arm. Your responsibilities may also include working on our brain-computer interface devices, surgical robotics, automation, microfabrication, and more. You will have the opportunity to own projects from concept to production, leveraging your mechanical engineering background in the challenging field of brain interfaces and human-robot interaction. Your responsibilities will include:

• Designing and integrating robot mechanical and electrical components and assemblies with a heavy emphasis on usability and safety
• Collaborating with clinical trial participants, neuroscientists, biologists, and engineers to establish design criteria
• Rapidly and effectively building systems to meet project goals
• Applying analytical methods, including calculations and simulations, for the design and optimization of structures and mechanical components
• Actively driving every phase of device launch, from hands-on early feasibility prototyping through manufacturing release

Required Qualifications:

• Bachelor’s degree in one of the following disciplines or equivalent experience: Mechanical Engineering, Robotics, Mechatronics
• Strong understanding of engineering first principles
• Minimum of 3 years of mechanical engineering industry experience, including internships and project teams where you owned products from concept to production
• Proficient in 3D CAD

Preferred Qualifications: 

• Experience with robotic systems such as robot arms, grippers, actuators, human-robot interaction
• Multidisciplinary experience in robotics software and control (e.g., Python, ROS, MATLAB, control theory)
• Electrical engineering proficiency (e.g., PCB design, wire harnessing, circuit design)
• Proficiency with conventional machining and rapid prototyping technologies

ABOUT THE ROLE

We are looking for a System Test Engineer with a focus on EMI/EMC to join our rapidly growing team in Costa Mesa, CA. In this role, you will work closely with avionics, system, and software engineers to create test systems for development, qualification, verification, and validation purposes. If you are someone who thrives in a fast-paced environment supporting new developments, active deployments, and customer operated hardware, we are looking for you.

WHAT YOU'LL DO

• Core Responsibility: Own EMC test readiness end-to-end from translating designs into test configurations to driving schedules and deliverables across teams.
• Create test systems to support all phases of product development.
• Define cable harnesses, breakout interfaces, and test hardware setups.
• Collaborate with SW/FW for test modes, stimulation, and telemetry.
• Configure and verify DUT operating modes prior to and during EMC testing.
• Develop and maintain test setup and configuration documentation.
• Track and drive on-time delivery of test hardware, fixtures, and support equipment to the EMC team.
• Proactively manage the test schedule based on hardware availability, coordinate across disciplines, and remove blockers to eliminate dead time.
• Maintain real-time visibility into schedule risks and escalate early to keep milestones on track.
• Participate in design reviews and provide input to identify issues and drive design choices.
• Conduct root cause analysis in support of vehicle integration and field operations.

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or equivalent.
• 3+ years design experience with NX CAD software for 3D modeling and drafting.
• Proficient in designing electrical harnessing for rugged commercial, industrial, aerospace, or military applications.
• Familiarity with common electrical bus interfaces (CAN, Ethernet, RS422, RS232, MIL-STD-1553).
• Proficient with schematic capture and PCB layout tools (e.g., Altium Designer, OrCAD, KiCad).
• Ability to read and interpret schematics, wiring diagrams, and cable harness drawings.
• Proficient with Microsoft Office Suite and engineering documentation tools.
• Must possess excellent communication skills.
• Eligible to obtain and maintain an active U.S. Secret security clearance

REQUIRED QUALIFICATIONS

• Experienced and familiar with aircraft avionics module vendors and avionics component suppliers in UAS programs.
• Exposure to EMC/EMI testing or familiarity with MIL-STD-461G test methods.
• Experience working in or supporting EMC test lab environments (shielded rooms, anechoic chambers).
• Familiarity with EMC test equipment such as spectrum analyzers, LISNs, current probes, or signal generators.
• Experience with simulation tools (e.g., LTspice, MATLAB, ADS) for filter or signal analysis.

ABOUT THE TEAM 

The Anduril Imaging team develops state-of-the-art imaging systems across both hardware and software, deployed to tackle the most significant security challenges of America and its allies.  The team is heavily involved in utilizing computer vision, perception, electro-optical, infrared, and sensor data to give our war fighters and allies an advantage.   

ABOUT THE JOB 

The Imaging team is seeking a Firmware Engineer to help design a new product lines. In this role, you will work closely with an interdisciplinary technical team to define, complete the design and analysis, build prototypes leading to ground and flight testing, and mature the prototypes into products. 

WHAT YOU’LL DO

• Design firmware for embedded hardware, from concept to functional prototype, board bring-up, and system level integration
• Write C/C++ for ARM processers in modern FPGAs, SoCs, and SoMs
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both lab equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools
• Work closely with hardware and software engineers for component selection, troubleshooting, and product support
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products
• Develop firmware across multiple products at various stages of their development cycle

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering, Computer Engineering, or equivalent
• 5+ years of experience developing firmware for for embedded processors using C/C++
• Experience with configuration control system like (eg Git , Github etc..)
• Experience with testing, supporting, and troubleshooting complex hardware, embedded systems, and products
• Competence with test equipment such as oscilloscopes, logic analyzers, debuggers, current-probes, and automation of tests
• Eligible to obtain and maintain an active U.S. Secret security clearance 

PREFERRED QUALIFICATIONS 

• 5+ years of experience FPGA devices
• Demonstrated experience designing for common communication busses like SPI, I2C, CAN
• Embedded software development experience with the use of timers and interrupts
• Experience with developing HDL firmware for Xilinx FPGA devices and embedded real-time systems with C/C++
• Experience with component selection, schematic capture, high speed board design, and PCB layout
• Knowledge of embedded Linux development, including device trees, hardware drivers, bootloaders, and basic Unix/Linux tools
• Familiar with common programming languages like Python and MATLAB
• Familiarity with infrared image sensor technology

Position Overview

We are seeking a skilled Mechatronics or Aerospace Technician to join our electric propulsion system production line. The technician will be responsible for assembling, testing, and troubleshooting advanced electric propulsion components and subsystems, ensuring that products meet stringent aerospace and quality standards. The ideal candidate will have a strong background in mechanical, electrical, and control systems, as well as experience in high-reliability manufacturing environments.

Key Responsibilities

• Assembly & Integration
• Assemble and integrate mechanical, electrical, and mechatronic components for electric propulsion systems (thrusters, power units, fluid systems).
• Perform precision alignment and mounting of propulsion components using specialized tools and fixtures.
• Install sensors, actuators, harnesses, and control units.
• Testing & Calibration
• Conduct functional, electrical, and mechanical tests on propulsion subsystems, including leak checks, vibration tests, and thermal cycling.
• Perform sensor calibration, actuator tuning, and electrical continuity tests.
• Record and analyze test data to ensure compliance with engineering specifications.
• Troubleshooting & Maintenance
• Diagnose and resolve assembly, wiring, and control system issues.
• Execute preventive maintenance and repairs on assembly equipment and test rigs.
• Process & Documentation
• Follow work instructions, technical drawings, and schematics with high accuracy.
• Document assembly steps, test results, and any deviations or non-conformities.
• Support continuous process improvements and participate in root-cause analysis for failures.
• Collaboration & Compliance
• Work closely with engineers, quality teams, and production supervisors to ensure smooth operations.
• Adhere to aerospace manufacturing standards, ESD controls, and cleanroom protocols when required.
• Comply with all safety regulations and environmental requirements.

Qualifications & Skills

• Education:
• Associate degree or technical diploma in Mechatronics, Aerospace Technology, Electrical Engineering, or a related field (Bachelor’s degree is a plus).
• Relevant certifications (IPC, NASA-STD, or similar) preferred.
• Technical Skills:
• Proficiency in reading mechanical and electrical schematics, 3D CAD drawings, and assembly instructions.
• Experience with electrical wiring, harnessing, and PCB assembly.
• Familiarity with sensors, actuators, and control systems.
• Knowledge of vacuum systems, propulsion technology, or high-voltage components is a strong plus.
• Other Competencies:
• Strong problem-solving skills and attention to detail.
• Ability to work under minimal supervision and meet tight deadlines.
• Excellent communication and teamwork abilities.

Physical & Work Environment Requirements

• Ability to work in a cleanroom or controlled environment when required.
• Comfortable with standing, lifting components (up to 25 lbs), and working with precision tools.
• Availability for flexible shifts, including potential overtime.

This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands. 

What You’ll Do 

1. Contribute to the design, iteration, and qualification ofKatalyst’s spacecraft Electrical Power System (EPS), including power conversion, power distribution, battery interface electronics, solar array interfaces, protection circuitry, and subsystem power interfaces. 
2. Design,modify, and review schematics, PCB layouts, interface definitions, and analysis packages for spacecraft power electronics, with emphasis on switch-mode power supplies, DC/DC converters, load switching, current sensing, fault protection, and EMI-aware layout practices. 
3. Support integrated operation of EPS hardware during functional, performance, and qualification testing, working directly with test engineers to execute bench, thermal vacuum, vibration, and other qualification test campaigns.
4. Help own integrated functional testing of EPS hardware with avionics, flight software, mechanisms, payloads, and other spacecraft subsystems, ensuring power interfaces behave correctly across nominal, off-nominal, and fault cases.
5. Plan and execute targeted stress, margin, and performance testing, exercising hardware across design extremes such as input voltage range, load transients, thermal limits, startup sequencing, fault response, and converter stability.
6. Help define design changes and architecture improvements for future spacecraft power systems, including EPS feature upgrades, power budget impacts, redundancy considerations, telemetry needs, and mission-specific power requirements.

Your Ideal Background

1. Bachelor’s degree in electrical engineering or equivalent field.
2. 3+ years of experience designing, testing, or integrating power electronics, spacecraft EPS hardware, battery/solar power interfaces, or closely related high-reliability power systems.
3. Strong understanding of switch-mode power supply design, DC/DC converter architectures, compensation/stability, magneticsselection, protection circuitry, and practical power electronics debugging. 
4. Experience designing ormodifying schematics and PCB layouts for power electronics, including high-current routing, grounding, thermal considerations, creepage/clearance, current sensing, and EMI/EMC-aware layout practices. 
5. Proficiency in Altium or a similar ECAD tool for schematic capture, PCB layout review, design release, and documentation.
6. Exposure to spacecraft or embedded-system power architectures, including power distribution, load switching, battery management interfaces, solar array regulation, or power telemetry.
7. Exposure to common digital communication standards (SPI, I2C, UART, CAN, Ethernet) and mixed-signal design best practices for telemetry, control, and power-system interfaces.
8. Hands-on experience with hardware bring-up, bench testing, and debugging using oscilloscopes, electronic loads, power supplies, DMMs, logic analyzers, and related lab equipment.
9. Experience writing or executing test procedures, documenting results, and driving board- or component-level troubleshooting through root cause and corrective action.
10. Experience integrating power electronics with other spacecraft or embedded subsystems; exposure to environmental testing such as thermal vacuum or vibration is a plus but not required. 

Additional Requirements: Must be willing to work extended hours and weekends as needed.

Compensation and Benefits: Your base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. The anticipated salary range for this role is $105,000 - $145,000 annually.

Base salary is just one part of your total rewards package at Katalyst. You will also be eligible for long-term incentives, in the form of the Employee Stock Option and Equity Plan, as well as a relocation bonus and other discretionary bonuses. You will also receive access to comprehensive medical, vision, and dental coverage, and unlimited Paid Time Off.

At Katalyst our work on projects involving the U.S. Department of Defense requires adherence to International Traffic in Arms Regulations (ITAR), 22 C.F.R. Parts 120-130, which requires compliance with U.S. export laws before allowing employees to perform certain positions. Currently, our available roles necessitate access to ITAR-controlled information, and as a result, Katalyst would have to ensure any non-US person is authorized access to ITAR information before the commencement of employment. We are committed to equal employment opportunities and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin.

The Role

We are seeking a Senior RFIC Layout Designer to drive the physical implementation of advanced RF and mixed-signal integrated circuits for next-generation satellite communication systems. This is a senior individual contributor role focused on hands-on layout execution and top-level integration, working closely with cross-functional teams to deliver high-performance silicon.

Responsibilities

• Execute high-quality layout for RF, analog, and mixed-signal blocks in advanced FinFET nodes (e.g., LNA, RF amplifiers, mixers, PLL, LO generation, ADC/DAC, baseband filters, bandgap/bias/LDO)
• Contribute to top-level layout integration, including block placement, routing, power planning, and floorplanning.
• Contribute to layout strategies to meet performance, area, power, reliability, and manufacturability targets.
• Ensure robust implementation of matching and symmetry for sensitive RF/analog structures, and high-frequency routing and parasitic control.
• Ensure robust implementation of EM/IR, ESD, latch-up, and reliability considerations
• Collaborate closely with RF/analog designers, digital implementation teams, package/PCB engineers, and CAD to ensure seamless integration.
• Participate in establishing review processes (layout reviews, signoff checks, and quality metrics) to ensure first-pass silicon success.
• Drive full-chip physical signoff, including DRC/LVS/ERC closure, EM/IR and reliability verification.
• Own tapeout readiness and interface with foundry and EDA partners as needed.

Qualifications 

• 5+ years of RF/analog/mixed-signal layout experience.
• Extensive hands-on experience with advanced FinFET process technologies (≤16nm preferred).
• Proven track record of top-level SoC layout integration and successful silicon tapeouts.
• Experience collaborating with distributed teams, including collaborating with external layout vendors.
• Deep understanding of RF and analog layout techniques and device physics, including high-frequency effects, parasitics, and isolation strategies.
• Extensive hands-on experience with power planning and full-chip physical architecture.
• Strong proficiency with industry-standard tools.

Nice to Have

• Experience with high-frequency RF systems for wireless or satellite communications.
• Experience working on large mixed-signal SoCs with significant digital content.
• Exposure to reliability requirements for space or high-reliability applications.
• Experience developing methodologies in a high-growth environment.

Compensation and Benefits:

• Base salary range for this role is $120,000 – $180,000 + equity in the company
• Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level
• Comprehensive benefits package including paid time off, medical/dental/vision/ coverage, life insurance, paid parental leave, and many other perks

ABOUT THE TEAM    

The Air Dominance and Strike (AD&S) Electrical Engineering Team is responsible for developing high-reliability avionics, embedded processing, and power systems for Group 5 air vehicles and missile platforms. Working across hardware, software, and mission autonomy, the team delivers flight-critical electronics, PCB assemblies, and FPGA-based processing architectures that enable Anduril's next-generation autonomous air platforms to operate in complex and contested environments. AD&S Electrical Engineers drive end-to-end development, from system architecture and circuit design to verification, integration, and flight test, ensuring scalable, mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and modern air warfare.    

ABOUT THE JOB     

We are looking for an Electrical Integration Engineer to join our rapidly growing team in Costa Mesa, CA. In this role, you will work closely with avionics, systems, manufacturing, and flight test teams to support the development and test of air vehicle designs. If you are someone who thrives in a fast-paced environment supporting new developments, active deployments, and customer operated hardware, we are looking for you.    

WHAT YOU WILL DO    

• Create support documentation to include block diagrams, ICD’s wiring interconnect diagrams throughout all phases of product development

• Build up and test of avionics system components through lab, ground, and flight tests    

• Manage concurrent involvement in multiple projects at various stages    

• Participate in design reviews and provide input to identify issues and drive design choices    

• Conduct root cause analysis in support of vehicle integration and field operations    

REQUIRED QUALIFICATIONS    

• Bachelor’s degree in electrical engineering, Mechanical Engineering, or equivalent 

• Knowledge of Linux command line syntax, Virtual Machines, IP addressing and subnet structures, interpret system diagrams, lab equipment usage (power supply, voltmeter, oscilloscope, SA, SG, VNA), troubleshooting skills

• Proficient in designing electrical harnessing for rugged commercial, industrial, aerospace, or military applications    

• Familiarity with common electrical bus interfaces (CAN, Ethernet, RS422, RS232, MIL-STD-1553)    

• Must possess excellent communication skills    

• Eligible to obtain and maintain an active U.S. Secret security clearance    

PREFERRED QUALIFICATIONS    

• 3+ years experience designing and integrating electrical systems into high-speed air vehicles

• Experienced and familiar with aircraft avionics module vendors and avionics component suppliers in UAS programs    

• Experience with Siemens Capital software for 2D modeling and drafting. 

ABOUT THE TEAM

The Anduril Imaging team develops state-of-the-art imaging systems across both hardware and software, deployed to tackle the most significant security challenges of America and its allies. The team is heavily involved in utilizing computer vision, perception, electro-optical, infrared, and sensor data to give our war fighters and allies an advantage.

ABOUT THE JOB

As an Electrical Hardware Engineer at Anduril Imaging, you will design and develop advanced electronics for airborne EO/IR systems, focusing on sensor electronics, aircraft interfaces, and power management. Your role will involve hands-on testing and collaboration with cross-functional teams to ensure optimal performance and integration of cutting-edge technologies.

WHAT YOU’LL DO

• Contribute to the design, development, and testing of electronics for airborne EO/IR systems, including sensor electronics, aircraft interfaces, and power management.
• Support systems engineering teams in defining and refining requirements based on physics-based models of sensor and system performance.
• Assist in the design and development of PCB layouts in collaboration with the electrical engineering team.
• Participate in system testing at laboratory, ground, and flight test levels, providing detailed data analysis and feedback.
• Conduct troubleshooting and testing of electronic components and subsystems to ensure optimal performance.
• Work closely with technical leads and project teams to support system integration efforts.
• Document test results, system designs, and processes to maintain thorough technical records.

REQUIRED QUALIFICATIONS

• 5+ years of experience in electrical engineering, focusing on system-level design, development, and testing.
• A degree in Electrical Engineering or equivalent.
• Experience with analog and digital electronics design, testing, and troubleshooting.
• Proficiency in laboratory skills, including setting up and running experiments.
• Familiarity with PCB design tools and methodologies.
• Excellent problem-solving skills with a detail-oriented mindset.
• Ability to collaborate effectively within a multidisciplinary engineering team
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Experience in sensor or communication systems, such as RF, EO/IR, or optical technologies.
• Familiarity with analytical tools and programming languages such as MATLAB, Python, or C++.
• Understanding of system integration processes and workflows in aerospace or defense environments.

ABOUT THE TEAM
Anduril’s Maritime Division has assembled a diverse team of experts in software, robotics, artificial intelligence, sensor fusion, and data analysis to create software and hardware solutions that radically evolve the capabilities of our customers. We are fielding the next generation of autonomous systems to tackle the extremely challenging industry demands of maritime operations. Anduril has brought to market a unique, ultra-long-range, full-ocean-depth underwater vessel platform and a completely refreshed maritime vehicle and flexible manufacturing architecture that scales from "small" to "extra-large" vehicle sizes. Today, Anduril is executing on billion-dollar contracts while simultaneously performing Robot-as-a-Service (RaaS) AUV operations.

We are continuing to expand our product portfolio, now moving into the surface maritime domain. Products like Dive-XL, Dive-LD, Copperhead, Seabed Sentry, and surface products in the pipeline will create a system-of-systems that enable a multitude of autonomous missions across all maritime domains. If you are passionate about solving problems that have real impact and working on systems that directly contribute to achieving national strategic priorities, we want you to join Anduril’s Maritime Division and help us build the future of defense capability.

ABOUT THE JOB
We are seeking a highly motivated and experienced Electrical Engineer to join our team in Costa Mesa, California. You will work closely with the program leadership and a wide spectrum of cross-departments as part of a team focused on solving hard problems and changing the industry forever. In this role you will be responsible for designing and supporting the integration of various electrical subsystems, supporting testing efforts, and ensuring overall system performance meets the required specifications and standards. Join our dynamic team and help us build the next generation of autonomous maritime systems.

WHAT YOU'LL DO

• Develop electrical schematics, power system single line diagrams, system interconnect diagrams and define wire harnesses that connect electronic equipment within a subsystem and between subsystems
• Design electrical interfaces and enclosures for integration of sensors, and peripheral equipment with autonomous systems
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both test equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools
• Develop subsystems (sensors, interfaces, power management, and networking) for bespoke capabilities
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products
• Work in a fast-paced environment balancing schedule against cost and performance parameters
• Conduct peer-level and cross-discipline design reviews, perform requirements analysis, and plan system verification to ensure compliance with project goals and industry standards

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent with 5+ years of experience designing, testing, and troubleshooting electrical systems
• Knowledge of modern analog and digital electronics and electronic circuits
• Experience developing schematics, interconnect diagrams, and wiring harnesses
• Comfortable with a variety of electronic CAD tools (NX, SolidWorks, others acceptable)
• Familiarity with networking and standard interfaces such as Ethernet, CAN, I2C, USB, MODBUS, ProfiNet, etc
• Competence with test equipment such as multi-meter, oscilloscopes, logic analyzers, and automation of tests
• Experience with electro-mechanical and electrical design concepts
• Experience in design for signal integrity / power integrity
• Experience in designing and integrating low-power electronics
• Experience in fieldable system design
• Familiarity with developing and executing test plans for complex systems
• High-ownership and a bias toward action – if you see a problem, you want to solve and fix it
• Eligible to obtain and maintain an active U.S. Secret security clearance
• Ability to travel 25% with potential surges above 25%

PREFERRED QUALIFICATIONS

• Experience designing electronic circuits and hardware kits
• Experience designing electrical and power systems for autonomous systems
• Familiarity with common MCU, CPU, FPGA devices and technologies
• Experience with PCB design including collecting requirements, schematic design (Altium, Eagle), component selection, supervision or completion of layout, bring-up, test, debug and system integration
• Familiarity with software development processes and tools such as git, Github, JIRA, etc
• Comfortable in conducting worst case circuit or uncertainty and fault analysis
• Experience with high reliability and/or autonomous systems
• Familiarity with designing for rugged environments

ABOUT THE TEAM

Anduril’s Tactical Recon & Strike (TRS) is a division with two missions: 1) build highly capable autonomous drones, and 2) build solid rocket motors at scale. We transform products like Ghost, Anvil, Bolt, and Altius from early concepts into fully operational capabilities by partnering closely with specialist engineering, operations, and production teams. Through our Anduril Rocket Motor Systems (RMS) team, we design and manufacture solid rocket motors using advanced materials, proprietary formulations, and high-volume production methods—delivering safe, reliable propulsion systems that support a wide range of mission requirements. TRS hires software engineers & hardware engineers, who are excited to build across a diverse and powerful portfolio—from autonomous aerial systems to high-performance solid rocket motors. Our teams contribute to highly capable autonomous robotics systems and propulsion products that operate reliably in the most demanding mission environment.

ABOUT THE JOB

We are looking for an Electrical Engineer to join the team! TRS focuses on rapid prototyping and iterative development to enable fast deployment of products in support of defense for the US and our allies.

WHAT YOU’LL DO

• Design embedded control electronics from concept to production, including hardware selection, schematic & PCB design, board bring-up, system-level integration, and flight test.
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both lab equipment (Oscilloscopes, DMM, etc.) and software debugging tools.
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products.
• Work in a fast-paced environment supporting new developments, active deployments, and customer operated hardware.

REQUIRED QUALIFICATIONS

• Lab-based prototyping / research and development experience.
• Bachelor’s Degree in Electrical Engineering, Computer Engineering, or equivalent.
• 3+ years of experience designing, testing, and troubleshooting complex embedded systems and products.
• Demonstrated experience designing and integrating mixed signal circuits.
• Competence with test equipment such as oscilloscopes, logic analyzers, debuggers, current-probes, and automation of tests.
• Proficient with Altium Designer or equivalent electronic design automation design tools.
• U.S. Person status is required as this position needs to access export controlled data.

PREFERRED QUALIFICATIONS

• Proficiency with embedded software and firmware (C/Linux is a plus).
• Familiarity with software development processes and tools such as git, Github, JIRA, etc.
• Experience with developing for a safety-critical environment (human in the loop).
• Experience working on products used in extreme environments (automotive, aerospace, defense, etc.).
• Knowledge of software protocols for embedded development, including use of timers, interrupts, hardware peripherals such as SPI controllers and ADCs.

ABOUT THE TEAM

The Air Dominance and Strike (AD&S) Electrical Engineering Team is responsible for developing high-reliability avionics, embedded processing, and power systems for Group 5 air vehicles and missile platforms. Working across hardware, software, and mission autonomy, the team delivers flight-critical electronics, PCB assemblies, and FPGA-based processing architectures that enable Anduril's next-generation autonomous air platforms to operate in complex and contested environments. AD&S Electrical Engineers drive end-to-end development, from system architecture and circuit design to verification, integration, and flight test, ensuring scalable, mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and modern air warfare.

ABOUT THE JOB

We are looking for an Avionics Engineer to join our rapidly growing team in Costa Mesa, CA. In this role, you will be tasked with working closely with avionics engineers to review and design electrical integration details to ensure details are documented and communicated to all relevant stakeholders. If you are someone who thrives in a fast-paced environment supporting new developments, active deployments, and customer operated hardware, we are looking for you.

WHAT YOU WILL DO 

• Full cycle PCB design including collecting requirements, schematic design, component selection, supervision or completion of layout, bring-up, test, debug, and system integration
• Conduct bring-up and design work on microcontrollers, ensuring seamless integration within the system
• Troubleshoot issues that span electrical and software boundaries, utilizing both lab equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools}

ADDITIONAL LEARNING & DEVELOPMENT OPPORTUNITIES

• Work in a fast-paced environment supporting new developments, deployments, and customer operated hardware
• Perform power design, including development and integration of power management systems and components
• Develop payloads and subsystems (sensors, payload interfaces, power management, and networking)
• Create system interconnect diagrams and define wire harnesses that connect electronic equipment within a subsystem
• Collaborate closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional, mission-critical products
• Conduct peer-level and cross-discipline design reviews

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent, with 3+ years of experience designing, testing, and troubleshooting complex system designs
• Ability to perform power system and electrical loading analysis, simulation, and testing to determine optimal solutions
• High competence using lab test equipment (benchtop power supplies, electronics loads, oscilloscopes, DMM, logic/spectrum analyzers, etc.) with familiarity of thermal and EMI test chambers and using basic software debugging tools
• Familiarity with common electrical bus interfaces (CAN, I2C, SPI, Ethernet, RS232/422, RS485, USB)
• Exceptional organization and communication skills (both written and oral)
• Eligible to obtain and maintain an active U.S. security clearance
• Experience with power design and power management systems
• Hands-on experience with microcontrollers, including bring-up and design work
• Knowledge of modern analog and digital electronics and electronic circuits
• Experience designing mixed-signal PCBs with multiple layer counts, layer stackup and impedance matching for power and sensor applications, understanding correct grounding approaches and employing appropriate board protections and filtering
• Understanding of low voltage and high voltage power electronics and control systems in order to capture system interconnect diagrams and drive cable harnessing designs with proper wire and connector selection

PREFERRED QUALIFICATIONS

• Familiar with high end consumer or military embedded systems design
• Experience with power systems including batteries and AC power.
• Develop low-level firmware for bring-up and test
• Background in defense and missile systems.
• Comprehensive understanding of the effects of temperature and vibration on electrical designs.

We are seeking Firmware Intern for Summer 2026 (May/June - August/September). This is a paid, in-person, 12 week internships based out of Costa Mesa, CA.

What You’ll Do

• Design electronics from concept to functional prototype, including hardware selection, PCB design, and system level integration.
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both lab equipment (Oscilloscopes, DMM, etc.) and software debugging tools.
• Develop low-level firmware/software for microcontrollers, embedded Linux systems, and supporting development & testing tools.
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products.
• Work in a fast-paced environment supporting new developments, active deployments, and customer operated hardware.
• Concurrently manage involvement in multiple projects at various stages

Required Qualifications

• Perusing Bachelor’s Degree in Electrical Engineering, Computer Engineering, or equivalent.
• Must be a rising senior at the time of their internship and returning to school at the end of their internship to continue their academic studies for at least one quarter/semester.
• U.S. Person status is required as this position needs to access export controlled data.
• Ability to complete an in-person 12-week internship in one of our offices.

Preferred Qualifications

• Familiarity with test equipment such as oscilloscopes, logic analyzers, debuggers, current-probes, and automation of tests.
• Familiarity with software development processes and tools such as git, Github, JIRA, etc.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with embedded Linux development, including device trees, hardware drivers, bootloaders, and basic Unix/Linux tools.
• Exceptional organization and communication skills (both written and oral).
• Experience with Altium Designer or equivalent electronic design automation tools.
• Proficiency with C/C++ and common languages (Python, Rust, Haskell, etc.)

ABOUT THE JOB

As an Electrical Engineer in the Manufacturing organization you will design and build complex systems and PCBA platforms to test our products. Data acquisition and physical layer interfaces using FPGA, MCU, and off-the-shelf equipment will enable testing our systems to stringent standards ensuring that we are consistently shipping the highest quality products to our customers. You will work in a multi-disciplinary design team, managing requirements, capturing custom circuits, and designing complex assemblies and harnesses. You will work with firmware engineers to enable board support packages for embedded Linux, and bring up MCU RTOS platforms. In this role you’ll need to think creatively and come up with solutions to solve difficult testing problems and push to continuously improve our methods of automation, throughput, user interfaces, and data analytics.

WHAT YOU’LL DO

• Build things that test things. Design Circuits and Schematics that will be built into test automation platforms.
• Integrate your designs into Anduril’s PDM systems. You will follow the same process for component design and release that our product design teams use.
• Design and source PCB Assemblies with varying complexity - from FPGA based data acquisition boards, to MCU platform data interfaces, breakout boards, wiring harnesses, or peripheral modules.
• Architect and source circuit board test fixtures, integrating your designs with internally developed and off-the-shelf data acquisition equipment.
• Build internal library for test circuit for data acquisition, leverage your expertise for DFM / DFT.
• Bring up, Debug, and Characterize circuits, low speed interfaces (I2C, SPI, CAN, etc.) and high speed signals (RF, memory, USB).

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Electrical/Electronics, Computer Engineering, or related fields.
• 5+ years of relevant industry experience with emphasis on product designs that have gone to manufacturing.
• Experience with Professional Electronics Design packages (Altium, Cadence, PADs, etc.) for schematic capture and layout.
• Expertise in PCBA Design. Ability to design and fabricate your own designs, or guide contract manufacturing resources.
• Familiarity with electronics test equipment such as power supplies, electronic loads, oscilloscope, function generators, spectrum analyzers, data acquisition and measurement sensors.
• Familiar with Product Life Cycle (PLM) systems and releasing designs for production.
• Must be a U.S. Person due to required access to U.S. export controlled information or facilities

PREFERRED QUALIFICATIONS

• 7+ years of relevant industry experience.
• Experience with scripting tools Python for configuration and automation of setup tasks.
• Familiarity with FPGA PCBA platforms - RTL, design synthesis, and bare-metal coding.
• Master’s of Science in Electrical/Electronics Engineering or related field.
• Active Security Clearance or ability to obtain one.

WHAT YOU'LL DO

• Design embedded electronics from concept to functional prototype, including hardware selection, schematic & PCB design, board bring-up, and system level integration
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both lab equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools
• Work with modern SoCs and networking hardware to build Anduril platforms
• Work closely with firmware/software engineers for processor/peripheral selection, board bring up, and troubleshooting.
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products
• Work in a fast-paced environment supporting new developments, active deployments, and customer operated hardware
• Concurrently manage involvement in multiple projects at various stages

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering
• 10+ years of experience designing, testing, and troubleshooting complex hardware, embedded systems, and products
• Demonstrated experience with multi-gigabit SERDES, DDR memory busses, Ethernet MAC and PHY interfaces, FPGAs, and common communication busses like SPI and I2C
• Experience with microprocessor and microcontroller selection, configuration, and interfacing
• Experience with component, schematic capture, high speed board design, and guiding PCB layout.
• Competence with test equipment such as oscilloscopes, logic analyzers, debuggers, current-probes, and automation of tests
• Familiarity with product development processes and tools
• Knowledge of embedded software development, including use of timers, interrupts, hardware peripherals such as SPI controllers and ADCs
• Knowledge of embedded Linux development, including device trees, hardware drivers, bootloaders, and basic Unix/Linux tools
• Exceptional organization and communication skills (both written and oral)
• Proficient with Altium Designer or equivalent electronic design tools
• Familiar with common programming languages like Python for test automation.
• Must be able to obtain and hold a U.S. Top Secret Security Clearance

WHAT YOU'LL DO

• Full cycle PCB design including collecting requirements, schematic design, component selection, supervision or completion of layout, bring-up, test, debug and integration with the system.
• Development of fuzing circuitry for missile systems.
• Closely collaborate with vehicle development teams to design, document, and produce tailored fuzing systems and effectors.
• Develop system interconnect diagrams and define wire harnesses that connect electronic equipment within the vehicle.
• Provide support and collaborate within other air vehicle subsystem development constraints.
• Vendor surveys and evaluation to support sourcing for system components.
• Conduct peer-level and cross-discipline design reviews.
• Build up and test system components through lab, ground, and flight tests.
• Low level firmware development for bring-up and test.
• Root cause analysis in support of field operations.

REQUIRED QUALIFICATIONS

• BS or higher degree in Electrical Engineering or equivalent, with 5+ years of experience designing, testing, and troubleshooting complex board designs.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Comfortable with a variety of electronic CAD tools (Altium preferred, Eagle and others acceptable)
• Experience in design for signal integrity / power integrity
• Knowledge of modern analog and digital electronics and electronic circuits.
• Test experience including data acquisition, data analysis, and project coordination.
• Eligible to obtain and maintain an active U.S. Secret security clearance
• Ability to travel as required for testing (surges up to 25%).
• Passion for defending the United States and her allies.
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Active U.S. security clearance (DoD Secret or Top-Secret or DOE L or Q).
• 5-10 years’ work experience as an individual contributing engineer, focused on electrical design, analysis, and testing of fuzing and/or ordnance systems.
• Understanding of DO-254, DO-178C, DO-160 and relevant avionics design standards for UAS.
• Familiarity with electrical component suppliers.
• Experience in UAS, missiles, or maritime programs.
• Experience with the DoD Weapons Safety Boards.
• Experience designing and scaling production of components at volume.
• Experience developing or testing complex electrical systems.
• Experience with MIL-STD-1316, MIL-STD-882E, MIL-STD-2105.
• Experience with JOTP-052 and JOTP-054.
• Experience with explosive operations and/or handling munitions.

ABOUT THE TEAM

The Air Dominance and Strike (AD&S) Electrical Engineering Team is responsible for developing high-reliability avionics, embedded processing, and power systems for Group 5 air vehicles and missile platforms. Working across hardware, software, and mission autonomy, the team delivers flight-critical electronics, PCB assemblies, and FPGA-based processing architectures that enable Anduril's next-generation autonomous air platforms to operate in complex and contested environments. AD&S Electrical Engineers drive end-to-end development, from system architecture and circuit design to verification, integration, and flight test, ensuring scalable, mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and modern air warfare.

ABOUT THE JOB 

We are looking for an Senior Electrical Engineer to join our rapidly growing team in Costa Mesa, CA. In this role, you will be responsible for end-to-end avionics systems and subsystems development. You will also be working on design, integration, testing, and validation processes. This will require knowledge and experience in PCB design, harnessing, process management, and cross-functional teamwork. If you are looking to join a team in rapid avionics development, then this role is for you.

WHAT YOU’LL DO

• Develop high performance, high efficiency, and highly robust avionics solutions for air vehicle platforms
• Develop reliable on-board communication systems to exchange high bandwidth data across various air and ground assets
• Architect, design, and build high-speed digital PCBAs (schematic capture, simulation, board layout)
• Help decide what to do in-house and what to outsource, communicate design requirements with external vendors and help drive the progress
• Develop relationships with external vendors and communicate design requirements to external vendors and suppliers.
• Work cross-functionally between software, firmware and hardware teams
• Develop hardware validation test plans for sub-system and full system products.

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Electrical Engineering, or a closely related field.
• 8+ years relevant experience in electrical hardware design.
• Experience designing high density PCB layouts with an understanding of cutting-edge PCB manufacturing technology.
• Deep understanding of thermal, mechanical, power and performance tradeoffs.
• Experience with creating test plans, benchmarking and performing validation tests to determine performance of complex hardware systems.
• Understanding of high-speed interfaces (PCIe, DDR, USB, MIPI, etc.), power integrity, and signal integrity.
• Knowledgeable of EMI/EMC susceptibility and emissions along with mitigation experience.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

PREFERRED QUALIFICATIONS

• Experience with high performance SOMs (System On a Module).
• Experience in developing FPGA and ASIC architectures.
• Experience with rapid, hands-on prototyping.
• Skilled at soldering and reworking microelectronic components.
• Knowledgeable in RF investigation and analysis with the use of specialized equipment (Spectrum analyzer, Network Analyzer, etc) and RF simulation tool suites.
• Knowledge of state-of-the-art hardware systems, software tools and algorithms for interfaces required for sensors, actuators, firmware development, and inter-communication bus protocols (CAN-FD, Ethernet, SFP, 1553, etc).
• Experience using Linux command line interface (CLI).

ABOUT THE TEAM

Anduril’s Tactical Recon & Strike (TRS) is a division with two missions: 1) build highly capable autonomous drones, and 2) build solid rocket motors at scale. We transform products like Ghost, Anvil, Bolt, and Altius from early concepts into fully operational capabilities by partnering closely with specialist engineering, operations, and production teams. Through our Anduril Rocket Motor Systems (RMS) team, we design and manufacture solid rocket motors using advanced materials, proprietary formulations, and high-volume production methods—delivering safe, reliable propulsion systems that support a wide range of mission requirements. TRS hires software engineers & hardware engineers, who are excited to build across a diverse and powerful portfolio—from autonomous aerial systems to high-performance solid rocket motors. Our teams contribute to highly capable autonomous robotics systems and propulsion products that operate reliably in the most demanding mission environment.

ABOUT THE JOB

We are looking for a Senior Electrical Engineer to join our team in Atlanta, GA.

WHAT YOU’LL DO

• Design and own embedded control electronics from concept to production, including hardware selection, schematic & PCB design, board bring-up, and system level integration
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both lab equipment (Oscilloscopes, DMM, etc.) and software debugging tools
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products
• Work in a fast-paced environment supporting new developments, active deployments, and customer operated hardware
• Helped managed product sustainment in a production process with engineering improvements, product cost down, and sourcing engineering support
• Concurrently manage involvement in multiple projects at various stages

REQUIRED QUALIFICATIONS

• Comfortable working in a fast-paced environment
• Bachelor’s Degree in Electrical Engineering, Computer Engineering, or equivalent
• 8+ years of experience designing, testing, and troubleshooting complex embedded systems and products
• Demonstrated experience with some of the following: 8- and 32-bit Microcontrollers, Linux-based SOCs, Ethernet, common communication busses (SPI, I2C), and power regulation
• Power management and supply design experience - low power DC; medium voltage AC; battery storage systems
• Network management and switch design experience - Ethernet Gbit switch/PHY; configuring Ethernet switches (SW/PC)
• Competence with test equipment such as oscilloscopes, logic analyzers, debuggers, current-probes, and automation of tests
• Exceptional organization and communication skills (both written and oral)
• Proficient with Altium Designer or equivalent electronic design automation design tools
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Proficiency with C
• Familiarity with software development processes and tools such as git, Github, JIRA, etc
• Experience with developing for a safety-critical environment
• Experience working on products used in tough environments (automotive, aerospace, defense, etc.)
• Knowledge of embedded software development, including use of timers, interrupts, hardware peripherals such as SPI controllers and ADCs

ABOUT THE TEAM 

The Anduril Battlespace Awareness Radar team develops state-of-the-art radar systems, deployed to tackle the most significant security challenges of America and its allies. The Radar team is seeking an experienced Senior Electrical Engineer to transform ambitious concepts into manufacturable reality for the next generation of US radars. The Radar team is responsible for all aspects of radar system development, from the ideation stage through initial production.  In this role, you will work closely with an interdisciplinary technical team to design high-speed mixed-signal architectures and circuits, manage signal integrity in complex PCBs, and mature prototypes into products.

ABOUT THE JOB 

TO BE UPDATED 

WHAT YOU’LL DO

• Design combinations of high-speed digital, precision analog, RF, and high-power architectures
• Design embedded electronics from concept to functional prototype, including hardware selection, schematic & PCB design, board bring-up, and system level integration
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both lab equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools
• Work with modern SoCs and networking hardware to build Anduril platforms
• Work closely with firmware/software engineers for processor/peripheral selection, board bring up, and troubleshooting.
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products
• Work in a fast-paced environment, having to juggle multiple concurrent projects and customers.

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering
• 8+ years of experience designing, testing, and troubleshooting complex hardware, embedded systems, and products
• Demonstrated experience with multi-gigabit SERDES, DDR memory busses, Ethernet MAC and PHY interfaces, FPGAs, and common communication busses like SPI and I2C
• Experience with microprocessor and microcontroller selection, configuration, and interfacing
• Experience with component, schematic capture, high speed board design, and guiding PCB layout.
• Competence with test equipment such as oscilloscopes, logic analyzers, debuggers, current-probes, sprectrum/network analyzers, and automation of tests
• Familiarity with product development processes and tools
• Knowledge of embedded software development, including use of timers, interrupts, hardware peripherals such as SPI controllers and ADCs
• Experience with signal integrity and power integrity rules and simulation
• Exceptional organization and communication skills (both written and oral)
• Proficient with Altium Designer or equivalent electronic design tools
• Familiar with common programming languages like Python for test automation.
• Must be eligible to obtain and hold a U.S. Secret Security Clearance

PREFERRED QUALIFICATIONS

• Familiar with RF design and layout
• Past experience with placement and routing of PCBs
• Experience with JESD204 and PCIe
• Familiarity with military standards (MIL-STD-461/704/1275)
• Experience with high speed ADC/DAC's and software defined radios

We request transcripts as part of the early application process to understand your academic background and how your coursework supports the skills deemed critical for the role. Transcripts help us assess your technical and analytical abilities, complementing our interview process in which we also evaluate practical experience and cultural fit. If you choose not to share your transcripts, you will need to provide detailed information regarding your academic performance in relevant courses, including projects and coursework specifics, to ensure we evaluate your academic accomplishments properly. If you do provide academic transcripts, feel free to redact non-technical information (e.g., student ID, dates, non-technical coursework, etc.). Unofficial transcripts obtained online acceptable for this assessment.

ABOUT THE JOB

Anduril is looking for a skilled Electrical Engineer to take charge of the design and development of cutting-edge avionics systems for UAVs. In this role, you will work closely with cross-functional teams to design, test, and deliver high-performance electrical systems. The ideal candidate will have extensive hands-on experience with analog and digital electronics, PCB design, and avionics standards, along with the ability to lead technical teams, ensuring the successful execution of projects. This is an exciting opportunity to lead innovative projects and drive the technical direction of key initiatives, while collaborating with internal teams to push the boundaries of technology.

WHAT YOU’LL DO

• Hands-on Engineering: Actively participate in the design, testing, and troubleshooting of circuits, PCB layouts, and other electronic systems.
• Collaboration: Work closely with cross-functional teams, including software, firmware, and mechanical engineers, to ensure seamless integration of electrical systems.
• Mentorship: Provide technical guidance and mentorship to junior engineers, helping to develop the team's capabilities.
• System Testing and Validation: Oversee system-level testing and validation to ensure designs meet performance, safety, and reliability standards.
• Vendor Coordination: Interface with vendors to source and select appropriate components for designs, ensuring quality and timely delivery.
• Project Management: Support project timelines and ensure that technical milestones are met, reporting on progress to senior management.

REQUIRED QUALIFICATIONS

• Experience: 5+ years of experience in electrical engineering, with a focus on avionics, UAV systems, or similar industries.
• Technical Expertise: Strong hands-on knowledge of analog and digital circuit design, PCB design, and avionics systems.
• Project Management: Ability to oversee the technical aspects of projects from concept to delivery, ensuring that deadlines and specifications are met
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Familiarity with avionics design standards like DO-254, MIL-STD-810, and others.
• Proficiency with Altium Designer or equivalent PCB design tools.
• Strong problem-solving skills with a focus on delivering innovative solutions.

WHAT YOU’LL DO

• Lead an electrical engineering team in creating embedded compute solutions for vehicle management, DSP, and networking
• Own the full PCB development cycle of host boards for FPGAs / SoCs / SoMs (Developing requirements, schematic capture, board layout, bring-up, test, and integration)
• Develop and improve workflows throughout the FPGA / HDL design cycle (Architecture, functional block definition, simulation, system testing, HDL library standardization)
• Collaborate with internal stakeholders to develop a strategy for developing and rolling out your compute solutions across Anduril in a scalable manner
• Create, maintain and communicate product development schedules with sufficient detail to ensure that all assigned personnel are aware of their tasks and deadlines.

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 7+ years of experience designing, testing and troubleshooting complex board designs in military, automotive or similar hardware.
• Experience with leading an Electrical Engineering team focused on Digital Design
• Proficiency in an HDL language (VHDL, Verilog)
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Experience in design for signal integrity / power integrity.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Proficient with Altium Designer or equivalent electronic design automation design tool
• Eligible to obtain and maintain an active U.S. Top Secret security clearance

PREFERRED QUALIFICATIONS

• Understanding and familiarity with DO-254, DO-178C, DO-160, DO-311A
• Understanding and familiarity with MIL-STD-810, MIL-STD-704, MIL-STD-461
• Expertise in computer networking
• Experience with implementing enhanced security measures

WHAT YOU’LL DO

• Lead an electrical engineering team in creating embedded compute solutions for vehicle management, DSP, and networking
• Own the full PCB development cycle of host boards for FPGAs / SoCs / SoMs (Developing requirements, schematic capture, board layout, bring-up, test, and integration)
• Develop and improve workflows throughout the FPGA / HDL design cycle (Architecture, functional block definition, simulation, system testing, HDL library standardization)
• Collaborate with internal stakeholders to develop a strategy for developing and rolling out your compute solutions across Anduril in a scalable manner
• Create, maintain and communicate product development schedules with sufficient detail to ensure that all assigned personnel are aware of their tasks and deadlines.

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 7+ years of experience designing, testing and troubleshooting complex board designs in military, automotive or similar hardware.
• Experience with leading an Electrical Engineering team focused on Digital Design
• Proficiency in an HDL language (VHDL, Verilog)
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Experience in design for signal integrity / power integrity.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Proficient with Altium Designer or equivalent electronic design automation design tool
• Eligible to obtain and maintain an active U.S. Top Secret security clearance

PREFERRED QUALIFICATIONS

• Understanding and familiarity with DO-254, DO-178C, DO-160, DO-311A
• Understanding and familiarity with MIL-STD-810, MIL-STD-704, MIL-STD-461
• Expertise in computer networking
• Experience with implementing enhanced security measures

ABOUT THE ROLE

We are seeking highly experienced Senior Electrical Architects to play a pivotal role in defining and shaping the electrical architecture for our product lines. These roles will bridge the critical gap between high-level systems concepts and detailed electrical design, ensuring robust, scalable, and manufacturable solutions for our advanced defense systems. You will be instrumental in translating strategic Concepts of Operations (CONOPS) into actionable electrical requirements and architecture that will guide the entire product development lifecycle.

WHAT YOU'LL DO

• Lead the definition and development of robust, scalable, and maintainable electrical architectures for complex product lines.
• Conduct architectural trades, balancing performance, manufacturing feasibility, and future scalability.
• Bridge the gap between traditional Systems Engineering and Electrical Engineering by translating high-level CONOPS into detailed electrical requirements and functional modules.
• Allocate functions to specific electrical modules and subsystems, defining constraints, interfaces, and communications protocols.
• Flow module and subsystem information to PCB design and harnessing teams to guide designs in line with the overarching electrical architecture.

REQUIRED QUALIFICATIONS

• Proven ability to think strategically and define the long-term architectural vision for a product line
• Deep understanding of various communication protocols (e.g., Ethernet, CAN, RS-485, SDI, GMSL, SPI, I2C, PCIe) and their application in complex embedded systems
• Familiarity with embedded systems hardware, including MCUs, CPUs, and FPGAs, and their architectural implications
• Experience with full-cycle PCB design
• Experience with harnessing design and connector selection
• Successful track record of releasing products to production and delivering to end-users at scale
• Excellent communication, collaboration, and influencing skills to work across diverse engineering disciplines.
• Ability to obtain or have active DoD Top Secret Clearance with the ability to obtain SCI access,
• Must possess a Bachelor of Science degree in Electrical Engineering, or a related field AND 5+ years of experience in electrical engineering with a strong emphasis on systems architecture

DESIRED QUALIFICATIONS

• Experience with MIL-STD compliance.
• Utilize and bridge requirements management tools (e.g., DOORS) and Model-Based Systems Engineering (MBSE) tools (e.g., Cameo Systems Modeler) to ensure traceability and coherence from system-level to electrical requirements.

• Setup, execute and analyze test experiments per test procedures and record findings into test records
• Support with builds of test harnesses, racks, and environmental setups
• Improve and update automation, consistency, and coverage per engineering instructions
• Troubleshoot and repair of electrical, electronics and integrated circuits to the component level
• Maintain and calibrate electrical and/or mechanical test equipment
• Create assembly instructions and bill of materials for test equipment and fixtures
• Document test plans, user instructions and manuals
• Operate a clean and safe work environment
• Travel to test sites and external laboratories as required

• 4+ years of electronics testing experience in an R&D environment
• Familiarity with reading electrical system and component schematics
• Familiarity with product development life cycle, reliability, and compliance testing
• Familiarity with electronics test equipment such as power supplies, electronic loads, oscilloscope, function generators, data acquisition and measurement sensors
• Strong root cause analysis skills
• Excellent written, verbal, interpersonal and communication skills
• Able to pivot quickly between tasks and prioritize simultaneous tasks in a fast-paced environment
• Eligible to obtain and maintain an active U.S. Secret security clearance

• 5+ years electronics experience including testing
• Associate degree in Electrical/Electronics, Computer, Mechanical Technologies, or related fields
• Familiarity with IPC Quality Standards, IPC-610, IPC-620, J-STD and other assembly and inspection standards
• Experience with High Voltage and High Power Testing such as propulsion inverters and batteries
• Experience with equipment calibration and metrology
• Experience with electrical compliance testing such as EMI/EMC testing

WHAT YOU’LL DO

• Technical lead for electrical engineering team, creating embedded compute solutions for vehicle management, DSP, and networking.
• Own the full PCB development cycle of host boards for FPGAs / SoCs / SoMs (Developing requirements, schematic capture, board layout, bring-up, test, and integration).
• Develop and improve workflows throughout the FPGA / HDL design cycle (Architecture, functional block definition, simulation, system testing, HDL library standardization).
• Collaborate with internal stakeholders to develop a strategy for developing and rolling out your compute solutions across Anduril in a scalable manner.
• Create, maintain and communicate product development schedules with sufficient detail to ensure that all assigned personnel are aware of their tasks and deadlines.

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 15+ years of experience designing, testing and troubleshooting complex board designs in military, automotive or similar hardware.
• Experience with leading an Electrical Engineering team focused on Digital Design
• Proficiency in an HDL language (VHDL, Verilog)
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Experience in design for signal integrity / power integrity.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Proficient with Altium Designer or equivalent electronic design automation design tool
• Eligible to obtain and maintain an active U.S. Top Secret security clearance

PREFERRED QUALIFICATIONS

• Understanding and familiarity with DO-254, DO-178C, DO-160, DO-311A
• Understanding and familiarity with MIL-STD-810, MIL-STD-704, MIL-STD-461
• Expertise in computer networking
• Experience with implementing enhanced security measures

ABOUT THE TEAM

Intelligence Systems is focused on positioning Anduril as a lead provider of specialized engineering and products for Intelligence Community (IC) customers. We work within the IC to understand their requirements, shape their concepts of operation, and deliver exquisite capability across their problem set. We aim to develop and deploy critically needed capabilities that address our customers’ most pressing national security requirements. As the Manager of Manufacturing Test Engineering, your role encompasses the strategic oversight and tactical management of production systems to support high-volume products across the portfolio. You are charged with ensuring rigorous testing protocols are in place, resulting in the consistent delivery of superior quality products to our customers. Furthermore, your leadership guarantees the fulfillment of manufacturing's test throughput requirements. This position demands an innovative approach to resolving complex testing challenges, advancing scalability, and enhancing our automation, throughput, user interfaces, and data analytics methodologies.

ABOUT THE JOB

As an Electrical Engineer in the Manufacturing organization you will design and build complex systems and PCBA platforms to test our products. Data acquisition and physical layer interfaces using FPGA, MCU, and off-the-shelf equipment will enable testing our systems to stringent standards ensuring that we are consistently shipping the highest quality products to our customers. You will work in a multi-disciplinary design team, managing requirements, capturing custom circuits, and designing complex assemblies and harnesses. You will work with firmware engineers to enable board support packages for embedded Linux, and bring up MCU RTOS platforms. In this role you’ll need to think creatively and come up with solutions to solve difficult testing problems and push to continuously improve our methods of automation, throughput, user interfaces, and data analytics.

WHAT YOU’LL DO

• Build things that test things. Design Circuits and Schematics that will be built into test automation platforms.
• Integrate your designs into Anduril’s PDM systems. You will follow the same process for component design and release that our product design teams use.
• Design and source PCB Assemblies with varying complexity - from FPGA based data acquisition boards, to MCU platform data interfaces, breakout boards, wiring harnesses, or peripheral modules.
• Architect and source circuit board test fixtures, integrating your designs with internally developed and off-the-shelf data acquisition equipment.
• Build internal library for test circuit for data acquisition, leverage your expertise for DFM / DFT.
• Bring up, Debug, and Characterize circuits, low speed interfaces (I2C, SPI, CAN, etc.) and high speed signals (RF, memory, USB).

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Electrical/Electronics, Computer Engineering, or related fields.
• 5+ years of relevant industry experience with emphasis on product designs that have gone to manufacturing.
• Experience with Professional Electronics Design packages (Altium, Cadence, PADs, etc.) for schematic capture and layout.
• Expertise in PCBA Design. Ability to design and fabricate your own designs, or guide contract manufacturing resources.
• Familiarity with electronics test equipment such as power supplies, electronic loads, oscilloscope, function generators, spectrum analyzers, data acquisition and measurement sensors.
• Familiar with Product Life Cycle (PLM) systems and releasing designs for production.
• Currently possesses and is able to maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• 8+ years of relevant industry experience.
• Experience with scripting tools Python for configuration and automation of setup tasks.
• Familiarity with FPGA PCBA platforms - RTL, design synthesis, and bare-metal coding.
• Master’s of Science in Electrical/Electronics Engineering or related field.

ABOUT THE TEAM

Our Quality Engineering team is a dedicated group of professionals committed to ensuring the highest standards of quality in our processes. We play a crucial role in maintaining the integrity and reliability of our products, working collaboratively to identify, analyze, and resolve quality issues. Our team thrives on a culture of continuous improvement and innovation, leveraging data-driven insights to enhance processes and outcomes.

ABOUT THE JOB

We are seeking a Quality Engineer to join our growing team in Fort Collins, CO. You will work inside and outside the organization to define, develop, and execute processes to ensure the delivery of high quality, reliable and performant radar products to end customers.  You will help drive Anduril's internal quality management system to meet AS9100 requirements.  You will partner across the product development organization, production organization, and field operations organizations to continuously improve product quality at the various lifecycle phases of the product through the use of root cause analyses, corrective actions, and failure analyses.  This role will be dynamic and full of new engagement, challenges and opportunities.  If you are someone who has passion for the quality of their work, enjoys hands-on engagement with design engineering, production and vendors, possesses strong analytical skills and attention to detail, then this opportunity is for you! Your proactive problem-solving approach will be vital to our quality initiatives.

WHAT YOU’LL DO

• Own Calibration procedure and calibration of production assets along with dev. assets.
• Own 6S for the production and development areas.
• Reviewing Engineering drawings, manufacturing and inspection work instructions
• Verifying and inspecting incoming inspection of PCBAs, COTS and mechanical components.
• Ensuring non-conformance's and RCCA's are accurately controlled, documented and dispositioned
• Maintain quality records and support QMS requirements IAW AS9100
• Trending Quality metrics and performing/leading root cause analysis and corrective action
• Review PCB/PCBA schematics, layouts, assembly drawings, and create test documentation

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Electrical Engineering or similar technical field
• 2+ years of experience with PCBAs, electrical assemblies, or electronics manufacturing
• Experience working in AS9100 environment (Preferred)
• Ability to interpret PCB schematics, layouts, and BOMs along with Mechanical components drawings and BOMs.
• Familiarity with PCBA manufacturing processes and component-level troubleshooting
• Hands-on experience with test equipment (multimeter, oscilloscope, power supplies)
• Must be a U.S. Person due to required access to U.S. export controlled information or facilities

PREFERRED QUALIFICATIONS

• Working knowledge of product development methodologies such as Failure Modes and Effects Analysis (FMEA), Change Management, and Advanced Product Quality Planning (APQP) and Geometric Dimensioning and Tolerancing (GD&T)
• Working knowledge of electro-mechanical design and relevant manufacturing processes.
• Knowledge of ISO 9001 or AS9100 standard.
• Familiarity with IPC-A-600 & IPC-A-610 or standards is preferred.