ABOUT THE TEAM

Anduril’s Tactical Recon & Strike (TRS) is a division with two missions: 1) build highly capable autonomous drones, and 2) build solid rocket motors at scale. We transform products like Ghost, Anvil, Bolt, and Altius from early concepts into fully operational capabilities by partnering closely with specialist engineering, operations, and production teams. Through our Anduril Rocket Motor Systems (RMS) team, we design and manufacture solid rocket motors using advanced materials, proprietary formulations, and high-volume production methods—delivering safe, reliable propulsion systems that support a wide range of mission requirements. TRS hires software engineers & hardware engineers, who are excited to build across a diverse and powerful portfolio—from autonomous aerial systems to high-performance solid rocket motors. Our teams contribute to highly capable autonomous robotics systems and propulsion products that operate reliably in the most demanding mission environment.

ABOUT THE JOB

RAIL has two primary customers:

• Mission Autonomy (MA) — Mission Autonomy at Anduril is responsible for coordinating mission-level behaviors by manipulating hardware. For example, “fly to these waypoints,” “enter radio silence mode,” or “arm munitions.”
• Robotics Business Lines — These teams own specific Anduril robots end-to-end, as well as individual pieces of hardware on those robots.

RAIL bridges the gap between Mission Autonomy and diverse sets of hardware by creating common hardware interfaces. To allow Anduril to effortlessly integrate with new hardware. RAIL enables Anduril to scale and deploy ambitious new robot designs on short timelines by leveraging learnings and investments from our existing portfolio of diverse hardware and products.

For example, Anduril procures autopilots from a multitude of different hardware vendors. Each autopilot has a subtly different hardware interface — some use MAVLINK, some use STANAG, others use bespoke vendor-specific serial interfaces. Despite having different interfaces, they all provide standard functionality that flies along a set of waypoints.

As an author of advanced mission behavior, I shouldn’t care whether my autopilot speaks MAVLINK or STANAG — I just want my vehicle to get flying. RAIL abstracts away these subtle hardware differences from Mission Autonomy by providing a shared, common interface as a layer between Mission Autonomy and low-level hardware integrations. RAIL also provides other valuable features such as hardware custody management and access-control semantics, shared-memory IPC approaches and flexible observability plugins, to name a few.

RAIL is uniquely situated within Anduril. As the layer between Mission Autonomy and low-level-hardware at Anduril, you will find yourself developing a broad set of expertise working with nearly every robotics team at Anduril. To date, we’ve flown all across our US offices and test sites to launch new initiatives with Ghost, Altius, Dive, and Fury. Come help RAIL build the future of robot autonomy at Anduril!

WHAT YOU'LL DO

• Own major feature development and rollout of large features for our products — RAIL works with nearly every robotics team at Anduril — humility, empathy, and strong collaboration skills are key to success on the RAIL team!
• Write and maintain core systems that all robotics platforms at Anduril will use.
• Work closely with our vehicle software teams during product development, understanding their needs, and delivering high leverage software they are able to use bring their product to market.

REQUIRED QUALIFICATIONS

• 4+ years of C++ or Rust experience in a Linux development environment — you will be expected to learn Rust on the job, but prior Rust experience is not required
• BS in Robotics, Computer Science, Mechatronics, Electrical Engineering, Mechanical Engineering, or related field
• Proven understanding of data structures, algorithms, concurrency, and code optimization
• Experience troubleshooting and analyzing remotely deployed software systems
• Experience working with and testing electrical and mechanical systems
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Experience programming for embedded and physical devices
• Eligible to obtain and hold a US DoD Security Clearance
• Python and/or Go experience
• Multi-agent coordination of UAVs

ABOUT THE TEAM

Anduril’s Tactical Recon & Strike (TRS) is a division with two missions: 1) build highly capable autonomous drones, and 2) build solid rocket motors at scale. We transform products like Ghost, Anvil, Bolt, and Altius from early concepts into fully operational capabilities by partnering closely with specialist engineering, operations, and production teams. Through our Anduril Rocket Motor Systems (RMS) team, we design and manufacture solid rocket motors using advanced materials, proprietary formulations, and high-volume production methods—delivering safe, reliable propulsion systems that support a wide range of mission requirements. TRS hires software engineers & hardware engineers, who are excited to build across a diverse and powerful portfolio—from autonomous aerial systems to high-performance solid rocket motors. Our teams contribute to highly capable autonomous robotics systems and propulsion products that operate reliably in the most demanding mission environment.

ABOUT THE JOB

RAIL has two primary customers:

• Mission Autonomy (MA) — Mission Autonomy at Anduril is responsible for coordinating mission-level behaviors by manipulating hardware. For example, “fly to these waypoints,” “enter radio silence mode,” or “arm munitions.”
• Robotics Business Lines — These teams own specific Anduril robots end-to-end, as well as individual pieces of hardware on those robots.

RAIL bridges the gap between Mission Autonomy and diverse sets of hardware by creating common hardware interfaces. To allow Anduril to effortlessly integrate with new hardware. RAIL enables Anduril to scale and deploy ambitious new robot designs on short timelines by leveraging learnings and investments from our existing portfolio of diverse hardware and products.

For example, Anduril procures autopilots from a multitude of different hardware vendors. Each autopilot has a subtly different hardware interface — some use MAVLINK, some use STANAG, others use bespoke vendor-specific serial interfaces. Despite having different interfaces, they all provide standard functionality that flies along a set of waypoints.

As an author of advanced mission behavior, I shouldn’t care whether my autopilot speaks MAVLINK or STANAG — I just want my vehicle to get flying. RAIL abstracts away these subtle hardware differences from Mission Autonomy by providing a shared, common interface as a layer between Mission Autonomy and low-level hardware integrations. RAIL also provides other valuable features such as hardware custody management and access-control semantics, shared-memory IPC approaches and flexible observability plugins, to name a few.

RAIL is uniquely situated within Anduril. As the layer between Mission Autonomy and low-level-hardware at Anduril, you will find yourself developing a broad set of expertise working with nearly every robotics team at Anduril. To date, we’ve flown all across our US offices and test sites to launch new initiatives with Ghost, Altius, Dive, and Fury. Come help RAIL build the future of robot autonomy at Anduril!

WHAT YOU'LL DO

• Own major feature development and rollout of large features for our products — RAIL works with nearly every robotics team at Anduril — humility, empathy, and strong collaboration skills are key to success on the RAIL team!
• Write and maintain core systems that all robotics platforms at Anduril will use.
• Work closely with our vehicle software teams during product development, understanding their needs, and delivering high leverage software they are able to use bring their product to market.

REQUIRED QUALIFICATIONS

• 4+ years of C++ or Rust experience in a Linux development environment — you will be expected to learn Rust on the job, but prior Rust experience is not required
• BS in Robotics, Computer Science, Mechatronics, Electrical Engineering, Mechanical Engineering, or related field
• Proven understanding of data structures, algorithms, concurrency, and code optimization
• Experience troubleshooting and analyzing remotely deployed software systems
• Experience working with and testing electrical and mechanical systems
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Experience programming for embedded and physical devices
• Eligible to obtain and hold a US DoD Security Clearance
• Python and/or Go experience
• Multi-agent coordination of UAVs

The Test and Evaluation team at Anduril plays a crucial role in our mission, ensuring that every product meets the highest standards of performance and reliability. Our team conducts full system level development testing, new production acceptance testing, software validation testing and much more. This position is looking for a highly motivated flight test engineer with emphasis in software/hardware capability development and evaluation for the Altius UAS platform. Altius is a Group 2/3 autonomous vehicle specializing in intelligence, surveillance and reconnaissance (ISR) missions. You will be responsible for the evaluation of the software and hardware capabilities for operational suitability as well as Altius’s integration into the full suite of Anduril systems to complete complex operations.

What you’ll do

• As a flight test engineer, under minimal supervision, you will be responsible for test planning, execution, reporting, and evaluating the system under test (software and/or hardware).
• Test duties include:
• Candidate will support and plan test events conducted at test sites as required by the specific test.
• Configuration management of test owned assets. This includes specific to test configuration management (hardware components, specific payloads, software/firmware configuration) as well as fleet management (facilitate and track required maintenance, planning/assigning asset requirements for current testing and future efforts).
• Generation of evaluation test plans and reports focusing on system functionality and suitability of software and hardware integration efforts. In addition to technical test planning, planning includes safety (risk, hazards, develop mitigations) and logistical (available hardware, airspace, personnel resources, timeline/scheduling).
• Generate and execute test cards, conduct pre and post flight briefings, and manage test events with diverse support teams (pilots, engineering subject matter experts (SME), operations). Testing execution will include operating Altius when conducting system evaluation testing.
• Collaborate with SMEs and cross functional teams within the business line through development and production testing, reporting of test findings, and test status. This includes adjudication of testing tasks and characterization of issues, observations, and detailing results.
• Interface daily with hardware and software engineering teams.
• Collect metrics for flight test events to include sortie information and delays.

Required Qualifications

• A bachelor’s degree or a related technical discipline from an accredited institution
• Must possess the ability to understand new concepts quickly; apply them accurately; organize, schedule, and coordinate work phases; and determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems.
• Must have strong communication (written and verbal) and interpersonal skills. Must play in active role in strengthening communication channels both within the team and externally (engineering, program leadership, operations).
• Methodical, thorough, and detail oriented.
• Ability to work independently and as part of a team; able to perform complex tasks in one or more engineering areas.
• Willingness to learn new skills and concepts.
• Current or able to acquire an FAA 14 CFR Part 107: Small Unmanned Aircraft Systems certification.
• Current or able to acquire an FAA 14 CFR Part 61: Certification Pilots, Flight Instructors, and Ground Instructors (ground test complete is the ONLY requirement).
• Previous experience or working knowledge of National Airspace and UAS operating guidelines and regulations.
• Ability to obtain a security clearance.
• Able to work extended hours as required.
• Ability to travel as required for planning and testing.

Preferred Qualifications

• Strong software and documentation experience; familiarity with Linux based operating systems, networking, ssh, and command line.
• 3+ years flight test engineering or system level testing experience.
• Knowledge and experience with Group 2/3 fixed wing systems
• Experience working DOD programs.

About the Team

The Tactical Recon & Strike (TRS) team at Anduril develops small aerial drones (Group 1-3) along with all the necessary equipment for testing, deployment, and operation. The team transforms products like Ghost, Anvil, Altius, and Bolt from initial concepts into operational systems. We work closely with specialized teams to tackle some of our customers' most complex challenges. Currently, we are seeking a technical operations engineer for the Altius program, where you will leverage your operational and technical expertise to shape and deploy a solution of maximum effectiveness and reliability. Your scope will include standing up forward-deployed operations in austere environments, ensuring the successful combat employment of Anduril products, and shaping the long-term sustainment of these products. In addition, you will be a core participant in customer demonstrations and customer trainings, and test events closer to home.

About the Job

As a member of the Technical Operations team for TRS, you will play a critical role in bridging product engineering and deployed operations. You will be involved in unmanned air vehicle development programs, using your technical and operational expertise to deliver reliable solutions in challenging, remote environments. The Technical Operations team also plays an essential role in shaping the field sustainment of these products through various test and evaluation events, customer demonstrations, and deployments.

What you’ll do

• Support military operations by executing flight operations, conducting field maintenance, providing customer field support and training.
• Deploy our products to austere locations and work alongside our customers for extended periods of time.
• Tackle complex issues related to hardware, software, and networking in unstructured situations, driving them to resolution.
• Communicate field issue status to internal and customer teams, keeping them informed.
• Support the development and implementation of comprehensive operational and logistical plans for various events.
• Ensure high availability and performance of aerial systems.
• Maintain support plans for hardware and software.
• Assist in event planning and resource allocation, keeping key stakeholders informed about Technical Operations requirements.
• Incident response root-cause analyses (RCAs) for air systems in the field.
• Conduct post-incident reviews and implement preventive measures.
• Maintain up-to-date documentation.

What you’ll need

REQUIRED QUALIFICATIONS

• 3+ years of experience in technical field operations, deployment execution, or similar hands-on operational roles.
• Proven ability to master a technical system and support it in austere environments; Demonstrate deep subject matter expertise and trusted track record of impact.
• Advanced troubleshooting skills; able to resolve complex, non-routine issues at the interface of hardware, software, and networking.
• Excellent communication skills; comfortable leading technical discussions and explaining complex concepts to diverse audiences. Demonstrated ability to train peers or customers on the operation of a product
• Proven capability to mentor and develop team members.
• Experience performing data-driven root cause analysis and troubleshooting on complex system
• Willingness to travel up to 80% domestically and internationally, including to austere field environments
• Eligibility to obtain and maintain a U.S. Secret or Top Secret security clearance and support operations involving sensitive materials
• Willingness to work with energetics material (warheads).
• Must be able to obtain and maintain 14 CFR Part 107 and 14 CFR 61 Ground School. Must be able to obtain and maintain a FAA Class II Medical.
• Ability to meet health and medical requirements in advance of deployments in accordance with DFARS 252.225-7040, DoDI 3020.41, and/or any additional requirements outlined by region or supporting force, as applicable
• Ability to relocate, if not already local, to Atlanta, GA.

PREFERRED QUALIFICATIONS

• Bachelor's degree in Engineering, Technology, or related technical field.
• Familiarity with Linux/Unix OS; comfortable obtaining data from software platforms using command-line tools
• Proficiency with work order management systems (e.g., JIRA, Foundry, Odoo) and configuration control processes.
• Strong understanding of networking, antenna concepts, and spectrum analysis
• Experience developing operational and logistics plans for moving people and equipment over long distances.
• Prior military or overseas contracting experience

ABOUT THE TEAM

Anduril’s Tactical Recon & Strike (TRS) is a division with two missions: 1) build highly capable autonomous drones, and 2) build solid rocket motors at scale. We transform products like Ghost, Anvil, Bolt, and Altius from early concepts into fully operational capabilities by partnering closely with specialist engineering, operations, and production teams. Through our Anduril Rocket Motor Systems (RMS) team, we design and manufacture solid rocket motors using advanced materials, proprietary formulations, and high-volume production methods—delivering safe, reliable propulsion systems that support a wide range of mission requirements. TRS hires software engineers & hardware engineers, who are excited to build across a diverse and powerful portfolio—from autonomous aerial systems to high-performance solid rocket motors. Our teams contribute to highly capable autonomous robotics systems and propulsion products that operate reliably in the most demanding mission environment.

Must be eligible to obtain and maintain an active U.S. Secret security clearance. 

ABOUT THE JOB

Success in this position hinges on three key facets:

1. Systems and engineering mindset - the ability to understand and assess technical concept. Identifying system dependencies, interfaces, technical risks and the impact of key architectural decisions with the engineering team.
2. Execution focused - digging into the details, charting the path and owning the outcome. You will be expected to utilize your technical aptitude in conjunction with your program management, and leadership skills to deliver the best outcome for Anduril and the customer.
3. Collaborative partnership - managing customer relationships and shaping the future of the program with the government.

WHAT YOU'LL DO

• In partnership with the General Manager, Program Managers, and Chief Engineer, you will own the development and deployment of Anduril’s TRS technologies to meet the operational needs of the Department of Defense.
• Drive the technical execution of development programs from concept through delivery. Ensure all engineering deliverables meet contractual requirements, milestones, and technical standards.
• Serve as a bridge between Program Managers and engineering functional teams.
• Develop strong, trusting relationships with Anduril’s DOD customers, ensuring we have tight feedback loops that enable us to shape solutions, rapidly iterate, and ultimately field solutions faster
• Autonomously execute on broad and/or ambiguous requirements from internal engineering, customers, and third party corporate partners to own successful delivery of outcomes on multiple programs simultaneously
• Responsible for end to end execution of the program technical scope
• Develop and implement lightweight processes, tools, and metrics for program planning, scope management, risk management, and customer communication to enable Anduril to move rapidly
• Own all pieces of work and become a trusted partner and advisor to Anduril’s engineers

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Engineering, Business Administration, or a related field (technical background preferred)
• Minimum of 5 years experience managing the development of complex technical systems throughout the product lifecycle
• Proven track record of successfully managing complex, multi-million-dollar projects and driving their on-time, on-budget completion
• Strong strategic thinking, analytical, and problem-solving abilities with the ability to move seamlessly between tactical and the 30,000 ft level
• Experience coordinating multiple internal and external teams within a complex engineering or technology-focused organization
• Exceptional communication skills, both written and verbal, with the ability to present complex information clearly and concisely to diverse audiences
• Comfortable with 50% travel 

ABOUT THE TEAM

Anduril’s Tactical Recon & Strike (TRS) is a division with two missions: 1) build highly capable autonomous drones, and 2) build solid rocket motors at scale. We transform products like Ghost, Anvil, Bolt, and Altius from early concepts into fully operational capabilities by partnering closely with specialist engineering, operations, and production teams. Through our Anduril Rocket Motor Systems (RMS) team, we design and manufacture solid rocket motors using advanced materials, proprietary formulations, and high-volume production methods—delivering safe, reliable propulsion systems that support a wide range of mission requirements. TRS hires software engineers & hardware engineers, who are excited to build across a diverse and powerful portfolio—from autonomous aerial systems to high-performance solid rocket motors. Our teams contribute to highly capable autonomous robotics systems and propulsion products that operate reliably in the most demanding mission environment.

ABOUT THE JOB

As a Systems Engineer at Anduril, you will be a pivotal force in the Tactical Recon & Strike division, working on cutting-edge products like Altius, Anvil, Bolt, and Ghost. This role demands a proactive problem-solver with a strong background in electrical engineering, systems engineering principles and safety-critical development. You will drive the technical direction, ensure robust product design, and guide cross-functional teams to deliver critical capabilities that empower our mission. If you thrive in a fast-paced environment and are passionate about building revolutionary defense technology from the ground up, we encourage you to apply.

WHAT YOU'LL DO

• Drive systems thinking, processes, and capabilities for core Anduril Products including Altius, Anvil, Bolt and Ghost.
• Partner with product leads to scope, staff, and deliver capabilities to achieve company milestones working directly with the Business Lines to understand product requirements and deliverables.
• Partner with functional engineering teams to drive architectural design for safety, reliability, usability, modularity, upgradability, maintainability, and diagnosability into systems, subsystems, and interfaces.
• Drive system & subsystem requirements with functional engineering teams, defining risk reduction and verification & validation strategies for system of systems as well as subsystem assemblies.
• Execute and manage System Hazard Analyses (SHAs) and subsystem Failure Modes and Effects Analyses (FME(C)As) to drive safety and reliability centric requirements
• Coordinate and execute test events involving various levels of system integration from in-lab software simulations to flight test.
• Interpret & apply key industry & defense standard requirements for safety and interoperability, e.g. STANAG, MIL-STD-882, MIL-STD-464, MIL-STD-331, MIL-STD-1901A, JOTPs, etc.
• Demonstrate strong ownership, acting as a trusted technical partner to functional engineers and leaders across the organization.
• Ensure requirements are tied tightly to the organization’s capability roadmap, fostering efficient development and rapid iteration.
• Identify and drive to resolution key cross-team dependencies and inefficiencies.
• Autonomously lead and execute complex technical initiatives based on high-level goals from internal engineering, program office, and third-party partners, successfully delivering outcomes across multiple programs simultaneously.

REQUIRED QUALIFICATIONS

• Degree in Engineering, Aerospace Engineering, Mechanical Engineering, Electrical Engineering, Robotics, or a related field
• 5+ years experience in defense or safety-critical industry, particularly with safety-critical development standards, reliability and safety fault/hazard analysis, and requirements-driven verification and validation strategies
• Demonstrated proficiency in the application of engineering standards into engineering processes
• Proven ability to be a self-starter and to own task & risks from identification through closure
• Experience writing verifiable system-level, subsystem level, and software/hardware/component-level requirements
• Experience conducting safety & reliability analyses such as PHAs, SHAs, FME(C)As, or FTAs
• Experience and proficiency with systems and Python
• Familiarity with modern software development practices and designs, unit testing, integration test, and release processes
• Competence with test equipment such as oscilloscopes, logic analyzers, debuggers (JTAG, SWD, etc), current-probes, and automation of tests
• Comfortable working with ambiguity, evolving priorities, and challenging problems
• Excellent communication and presentation skills
• Must be willing to travel for test field events up to 25%
• Eligible to obtain and maintain an active Secret U.S. security clearance

PREFERRED QUALIFICATIONS

• Experience developing electromechanical system models to inform the design, operation, and troubleshooting of complex subsystems
• Hands-on manufacturing and/or flight testing experience
• Experience in design engineering
• Experience in software engineering
• Understanding of aerodynamics, avionics, and flight systems

ABOUT THE JOB

As a Manager over Shipping & Receiving, you will create a strategic plan to optimize warehouse operations, create a standard set of metrics to monitor team performance, set goals for improving performance, and identify areas to reduce cost while maintaining quality. The right person for this role has extensive supply chain knowledge, has developed SOPs and implemented them, has implemented or improved ERP/WMS, and has a track record of managing expensive inventory. If you are someone who can operate autonomously to keep a warehouse team motivated and enjoys process improvement this may be the role for you.

WHAT YOU’LL DO:

• Develop and implement material management strategies, policies, and procedures to comply with regulations.
• Hiring & training talent who can manage material flow per Anduril guidelines.
• Develop processes that increase the efficiency (speed & elimination of waste) and effectiveness of Anduril materials management.
• Implement necessary systems that match Anduril Federal policies on management of government property & inventory management.
• Implement End-to-End material management measures, including FIFO adherence, material variances, cycle time optimization, scrap/obsolescence management, cycle/physical counting, and audits, etc., to ensure inventory accuracy and to mitigate stockouts or overstocking. This includes the development & improvement of critical metrics.
• Collaborate with cross-functional teams, including procurement, production, manufacturing engineering, logistics, and quality, to aid in accurate demand forecasting, procurement planning, and timely delivery of materials.
• Collaborate with production planning and manufacturing teams to align material availability with production schedules, minimize disruptions, and meet customer demand on time.
• Analyze material usage trends, identify opportunities for process improvements, and implement lean practices to optimize material handling, storage, and distribution.
• Utilize ERP & WMS software systems and tools to track inventory, generate reports, and provide data-driven insights to support decision-making and optimize material-related processes.
• Ensure compliance with regulatory requirements, safety standards, and quality control protocols in all material management activities.
• Lead and develop a high-performing warehouse team, providing guidance, training, and performance feedback to foster a culture of excellence and continuous improvement.

QUALIFICATIONS

• Bachelor's degree in supply chain management, logistics, business administration, or equivalent work experience
• 5+ years of experience in material management, inventory control, or supply chain management roles in an aerospace and/or defense manufacturing environment
• 2+ years of experience managing a lead of supervisors, associates or technicians
• Ability to be onsite, local to Atlanta, GA

PREFERRED QUALIFICATIONS

• Associate’s or Bachelor’s degree in supply chain, manufacturing or related operations field
• Strong understanding of production rate, critical path analysis, and key warehouse fundamentals
• Strong understanding for receiving and deployment documentation for domestic and international shipments
• Strong knowledge of AS9100 standards and OSHA laws
• Experience being hands-on and boots on the ground in the warehouse with proven skills in both process and equipment troubleshooting, and ability to adapt to constantly changing warehouse environments
• Ability to identify safety issues with warehouse vehicles to ensure safe operations
• Knowledge of 5S, lean manufacturing or 6-Sigma principles
• Proficient with computer use (standard browser, word processing applications) and ability to present data
• Reliable, organized and detail-oriented with excellent verbal & written communication skills
• Forklift certification

ABOUT THE JOB

We are looking for Electrical Engineers to join our rapidly growing team! We have positions open in Costa Mesa, CA. These roles are targeted to start on a quarterly basis beginning in 2026. We hire self-motivated people, those who hold a higher bar for themselves than anyone else could hold for them. If you are a eager to solve tough problems, then this role might be for you!

WHAT YOU’LL DO

• Design electronics from concept to functional prototype, including hardware selection, PCB design, and system level integration.
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both lab equipment (Oscilloscopes, DMM, etc.) and software debugging tools.
• Develop low-level firmware/software for microcontrollers, embedded Linux systems, and supporting development & testing tools.
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products.
• Work in a fast-paced environment supporting new developments, active deployments, and customer operated hardware.
• Concurrently manage involvement in multiple projects at various stages.

REQUIRED QUALIFICATIONS

• Must be pursuing or have recently completed a Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related field.
• 3 months - 2 years of technical work to include technical internship and able to start full time in 2026. 
• Familiarity with test equipment such as oscilloscopes, logic analyzers, debuggers, current-probes, and automation of tests.
• Familiarity with software development processes and tools such as git, Github, JIRA, etc.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with embedded Linux development, including device trees, hardware drivers, bootloaders, and basic Unix/Linux tools.
• Exceptional organization and communication skills (both written and oral).
• Experience with Altium Designer or equivalent electronic design automation tools.
• Proficiency with C/C++ and common languages (Python, Rust, Haskell, etc.)
• Must be a U.S. Person due to required access to U.S. export controlled information or facilities; U.S. clearance eligibility may be required depending on program.

PREFERRED QUALIFICATIONS

• Have a bias for action. If you see a problem, you want to solve and fix it.
• Be naturally curious about the technologies and tools you use.
• Low-ego, high ownership, and mission oriented.

ABOUT THE TEAM

We are seeking an exceptional Senior, Cost Accounting to execute full stack cost accounting for a portion of Anduril’s portfolio of products. This role is critical to driving accuracy, insight, and control across our development, manufacturing,
and production operations. Reporting to the Manager, Cost Accounting, the Senior will ensure consistent and compliant application of Anduril’s standard costing methodology and be responsible for detailed transactional and balance sheet reconciliation review. The ideal candidate will bring deep technical competency, strong leadership skills, and a risk-based approach in support of the company’s preparation for a potential future IPO.

WHAT YOU’LL DO

• Perform asset capitalization, depreciation, and management for deployed internal and subscription assets.
• Responsible for the recognition and accounting treatment of hardware treatment. Including , where applicable, COGS, maintenance and repair, returns, operations and sustainment, and capitalization.
• Perform and continuously improve standard costing practices to ensure accurate product costing, variance analysis, and margin reporting for designated product lines and production sites.
• Perform work order review, variance analysis, and closure for designated product lines and production sites.
• Responsible for a portion of the Company’s cost accounting close process, including cost roll-ups, variance analysis, absorption reporting, and reconciliations of inventory and work-in-process.
• Support the adherence to internal controls to strengthen financial accuracy and compliance; identify and remediate control deficiencies as needed.
• Administer physical and cycle count programs across designated sites, ensuring completeness, accuracy, and proper valuation of inventory.
• Interface directly with external auditors on cost accounting and inventory- related matters during the annual financial statement audit.
• Partner with Operations, Supply Chain, and Engineering to analyze manufacturing performance, cost drivers, and production efficiency opportunities.
• Support pricing, cost proposal, and audit requirements related to U.S. government contracts (FAR/CAS).
• Contribute to IPO readiness initiatives, including audit preparation, systems scalability, and establishment of SOX-compliant financial controls.
• Support the Manager with preparing insightful cost analyses and recommendations to support strategic and operational decision-making.
• Support the Manager with a continuous improvement mindset, prioritizing automation to enhance efficiency and accuracy in all financial processes.

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Accounting, Finance, or related field required; CPA or CMA preferred.
• 5-7 years of progressive cost accounting experience in manufacturing.
• Proven experience with standard costing in complex, low-volume, high-dollar manufacturing environments, with ability to grow into a high-volume environment.
• Strong knowledge of U.S. government contracting cost principles (FAR/CAS).
• Demonstrated experience with maintaining effective internal controls and supporting external audits.
• Advanced proficiency with ERP systems (e.g., Oracle, SAP, or similar) and data analysis tools.
• Demonstrated ability to communicate effectively across functions and influence senior leadership.
• Experience in a privately held company preparing for an IPO is highly desirable.
• Exceptional analytical, organizational, and leadership skills with a focus on continuous improvement and operational excellence.

ABOUT THE TEAM

At Anduril, our recruiting team is the driving force behind building a world-class organization. We are passionate, innovative, and deeply committed to finding exceptional talent that fuels our mission. By collaborating with leaders across engineering, operations, and technology, we shape and execute hiring strategies that are as dynamic and forward-thinking as the company itself. Our team thrives in a fast-paced environment, setting the standard for excellence, creativity, and strategic talent acquisition—ensuring that every new hire contributes to Anduril's continued success.

This role is a 6-month contract. Location: Costa Mesa, CA or Atlanta, GA.

ABOUT THE JOB

We are seeking a Hardware Recruiter to join our Tactical Recon & Strike recruiting team. Based in our Costa Mesa, CA or Atlanta, GA office, you will operate independently as a subject matter expert, ensuring we recruit top-tier talent and shape our long-term talent strategy. As a key member of Anduril's hardware recruiting team, you will be responsible for the company's talent management as we continue to rapidly grow. Your work will be hands-on and involve collaborating with leaders and individual contributors to define the hiring needs of the company. To achieve this, you will be given the autonomy and tools to execute on our strategy to build and develop Anduril's world class team. We are looking for someone who can handle high levels of ownership while tackling every aspect of recruiting and is excited to be part of small team where no task is too big or too small. 

WHAT YOU’LL DO

• Operate Autonomously: Serve as a trusted talent advisor for complex hiring across the TRS division to recruit for: Electrical Engineers, Mechanical Engineers, Firmware Engineers, etc.
• Develop and optimize recruiting strategies using prospecting techniques, tools, and automation to continuously improve candidate management and data extraction processes.
• Collaborate closely with the talent acquisition team, hiring managers, and senior leadership to shape recruitment strategy, guide process improvements, and drive high-impact, complex hiring projects.
• Possess and apply breadth and depth in recruiting tools and general industry best practices, acting as a SME in adherence to process in our systems that impact our reporting and broader hiring strategy.
• Leverage a deep understanding of labor market and trends related to hiring.
• Own and execute pipeline direction, driving results through metrics-based measurement, including sourcing outreach, candidate-driven data, and offer/close rates.
• Exhibit extensive recruiting experience and in-depth knowledge paired with company hiring objectives to resolve complex talent problems and improve processes.
• Manage the hiring roadmap and execution to meet goals for multiple teams, effectively communicating objectives and priorities.
• Direct the application of existing principles and processes while guiding the development of new policies and ideas.

REQUIRED QUALIFICATIONS

• BA Degree in Human Resource Management, Business Administration, or a related field.
• 5-10 years of experience in talent acquisition, preferably in divisional hiring.
• Demonstrated leadership in ambiguous, fast-paced environments with a focus on strategic stakeholder alignment.
• True Ownership: Accountability for outcomes, with a commitment to improving all aspects of the business.
• Proven ability to convey complex information in simple terms and drive a data-driven narrative.
• Strong cross-functional collaboration skills and a track record of influencing organizational best practices.
• Deep knowledge of recruitment technology and a passion for innovating processes to achieve creative and effective TA goals.
• Must be eligible to obtain and maintain a DoD Security Clearance.

PREFERRED QUALIFICATIONS

• Experience in startups, tech, and relevant hardware domains (AAV, UAS, AUV, Weapons, or related programs).
• Ability to work independently with little supervision.
• Flexible and solution-oriented in troubleshooting routine obstacles.
• Direct, succinct, and timely sharing of information, with strong active listening skills.
• Continuous Learner: Low ego, high curiosity; embraces candid feedback and uses setbacks as opportunities to iterate and excel.

ABOUT THIS JOB

Anduril’s Altius Manufacturing Engineering team is seeking a Senior Automation Engineer to join our team. The Altius Manufacturing Engineering team is responsible for producing all Altius UAV variants at our factory in Atlanta, GA. As a member of this team, you will have the opportunity to help define what production automation looks like for Altius production lines.

WHAT YOU’LL DO

• Design, build, and commission automated manufacturing systems to improve production throughput, product quality, and operator safety
• Work with product-specific design & manufacturing teams to scope the appropriate level of automation
• Own the design and integration of automation cells including robot / cobot applications, conveyance, bespoke electromechanical systems, and automated inspection  
• Work with IE and Facilities teams to lay out production lines in new and existing Anduril factories
• Generate 2D and 3D CAD files for automation lines and their systems / components
• Enforce and contribute to Anduril’s internal processes & standards, including requirements definition, vendor solicitation, commissioning sequences, and safety buyoffs
• Partner with cross-functional teams to troubleshoot equipment issues, reduce downtime, and drive continuous improvement initiatives

REQUIRED QUALIFICATIONS 

• Bachelor's degree in Robotics, Computer Science, Mechanical Engineering, Electrical Engineering, or similar
• 6+ years of experience designing and commissioning automated production equipment
• Proficient CAD modeling in NX, Solidworks or AutoCAD
• Experience with at least one major conveyance system (fixed/palletized, AGV/AMR, slat, overhead carrier, etc)
• Proficient in robot / cobot selection and integration, including path planning, EOAT design, dresspacks, and safety
• Experience integrating various control components including PLCs, HMIs, pushbuttons, stack lights, safety scanners, etc
• Must be a U.S. Person due to required access to U.S. export controlled information or facilities

PREFERRED QUALIFICATIONS 

• 9+ years of experience designing and commissioning automated production equipment
• Strong 3D CAD in NX
• Experience with multiple conveyance systems (fixed/palletized, AGV/AMR, slat, overhead carrier, etc)
• Experience with automated dispense systems (adhesives, TIMs, paint, coatings, etc)
• Experience with control panel layout, electrical component selection, and cable routing
• Experience integrating with MES and QMS

ABOUT THE JOB:

We are seeking a Systems Administrator to own the deployment, maintenance, and support of software and tools across our manufacturing lines. This role blends traditional system administration with elements of network administration, focusing on ensuring production systems are secure, reliable, and optimized for factory operations. You’ll collaborate with engineers, operators, and cybersecurity experts to keep our manufacturing environment running smoothly at scale.

WHAT YOU"LL DO:

• Deploy, configure, and maintain hardware, servers, and software systems across the manufacturing line while managing their full lifecycle, including provisioning, updates, tracking, and retirement.
• Design, configure, and support network infrastructure—switches, VLANs, routing, wireless, and segmentation—to ensure reliable, low-latency connectivity for production environments.
• Build, harden, and maintain physical and virtual servers for manufacturing applications, ensuring performance, security, and high availability.
• Monitor system, server, and network performance across the factory floor, proactively identifying and resolving issues that could impact production throughput or on-time manufacturing.
• Support deployment and integration of factory stations, endpoints, and production equipment, coordinating with engineering and operations to ensure smooth transitions and minimal downtime.
• Implement security controls, access management, and compliance standards across servers, endpoints, and network infrastructure.
• Troubleshoot complex hardware, software, and network issues in time-sensitive manufacturing environments and provide clear updates to stakeholders.
• Document deployment processes, configurations, and troubleshooting guides, while recommending improvements that increase scalability, reliability, and factory efficiency.

REQUIRED QUALIFICATIONS:

• 5+ years as a Systems or Network Administrator in manufacturing, industrial, or high-throughput environments, with strong experience managing servers, endpoints, and production equipment.
• Proficiency in Windows/Linux system administration, including server buildout, virtualization, imaging, and endpoint lifecycle management.
• Hands-on expertise configuring and troubleshooting network components such as switches, firewalls, VLANs, routing, DNS, and VPN services.
• Ability to diagnose and resolve hardware, software, server, and networking issues in fast-paced, production-critical environments.
• Experience with asset tracking, configuration management, and maintaining accurate inventories of deployed hardware and systems.
• Strong understanding of security principles, including access controls, endpoint hardening, and secure network design.
• Excellent communication and documentation skills, with the ability to clearly convey system status, risks, and updates.
• Eligible to obtain and maintain a U.S. either SECRET or TS clearance

PREFERRED QUALIFICATIONS:

• Experience supporting MES, ERP, or factory software platforms, as well as OT networks, PLCs, or SCADA systems.
• Background in designing or supporting hybrid IT/OT network architectures, virtualization platforms (VMware/Hyper-V), or containerized environments.
• Familiarity with automation tools such as Ansible, Terraform, or SCCM for server or system deployment and configuration.
• Experience with asset management platforms, CMDBs, or reliability engineering practices like redundancy and failover planning.
• Relevant certifications such as Server+, Azure Administrator, CCNA, or ITIL.

ABOUT THE TEAM

Anduril’s Tactical Reconnaissance & Strike (TRS) Finance group is seeking a Finance Manager to join our team and support the Small Drones business line. This role will own core FP&A responsibilities (close insights, forecasting, budgeting, and executive reporting) while partnering closely with Engineering, Product, Program Management, Growth, and Contracts to improve execution, investment decisions, and overall business performance.

We are not looking for someone that will just be a service provider but someone that will have a seat at the table and drive strategic & operational growth within Small Drones—helping build a scalable financial operating system for a rapidly evolving Small Drones analytics portfolio.

ABOUT THE JOB

In practice, this role will support important decisions with analytical insight and strategic and tactical recommendations to drive the long-term success of the Small Drones business line. You will lead business line forecasting, budgeting, and performance management, and communicate your findings to senior leadership. You will partner cross-functionally to operationalize hypotheses, take action, and continuously improve financial and operational rigor.

This role requires a strong interest in solving puzzles with an ability to recognize patterns and collaborate via cross-functional partnership to drive effective decision-making. Success in this position comes from a dynamic mindset, strong analytical skills, attention to detail, and an operating posture that balances speed with rigor—especially in environments with evolving requirements and high mission impact. The ideal candidate can work autonomously with minimal direction, can own ambiguous workstreams end-to-end, and consistently drives work to completion.

WHAT YOU’LL DO

• Business Line FP&A (Forecasting, Budgeting, Close Insights)
• Own the Small Drones financial operating rhythm: monthly close insights, forecasting, and variance drivers tied to engineering delivery and customer milestones
• Lead annual and quarterly planning cycles, including target setting, resource allocation, and performance tracking against business objectives
• Develop executive-ready reporting, dashboards, and narratives for AD&S leadership to drive decision-making
• Partner with cross-functional leaders to surface risks and opportunities early and drive corrective actions
• Unit Economics, Cost Structure, and Scaling Analysis
• Develop and maintain business-line models to quantify unit economics (Analytics + integration + support), margin drivers, and scaling assumptions
• Analyze cost drivers across labor, infrastructure, test, security/compliance, and field support to improve predictability and efficiency
• Support build/buy/partner decisions and quantify ROI for tooling, infrastructure, and capability investments
• Headcount Planning & Workforce Analytics
• Create comprehensive headcount and new hiring budgeting plans aligned to roadmap delivery and program commitments
• Lead the headcount forecasting and reporting process, ensuring alignment with financial, operational and technical goals
• Partner with People function, Talent Acquisition and department leaders to analyze staffing needs, hiring plans, and workforce costs
• Support functional leaders to develop workforce plans as part of the annual planning process
• Develop and maintain models to project salaries, benefits, and personnel-related expenses, ensuring accuracy in financial planning
• Track actuals vs. forecast for headcount, compensation, and benefits, providing insights on variances and trends
• IRAD & Internal Investment Management
• Partner closely with Small Drones engineering and product leaders to create comprehensive budgeting plans for IRAD programs and strategic initiatives
• Manage IRAD budget tracking, including burn, staffing mix, milestone outcomes, and post-gate spend visibility
• Support trade studies for where to invest IRAD vs. customer-funded development to accelerate product maturity and repeatability
• Program / Customer Execution Finance (Plus: Proposals and Pricing Support)
• Support program performance management by tracking actuals vs. forecast for key cost elements and deliverables; provide actionable insights to Program Management and Engineering leaders
• Develop metrics and a monitoring plan to ensure effective implementation of program financial plans while identifying ways to continually improve performance
• Support pricing strategy and proposal development for Small Drones pursuits as needed, including modeling scope assumptions and post-award baseline set-up
• Partner with Growth, Contracts, and Program teams to support deal constructs, assumptions, and change management to improve deliverability and financial outcomes
• Process Improvement and Tooling
• Establish and continuously improve reporting processes and tools to increase transparency, speed, and decision quality
• Drive process improvements across planning, forecasting, and performance management; standardize recurring deliverables where possible

REQUIRED QUALIFICATIONS

• Bachelor's degree in Finance, Accounting, Economics, or a related field; MBA or relevant professional certification (CPA, CFA) is a plus
• 5+ years of experience in financial analysis, modeling, and forecasting within a corporate FP&A, investment banking or consulting environment
• Experience supporting program finance, program execution cadence, or defense contracting environments is a plus
• Experience supporting proposals, pricing, or deal finance in a cross-functional environment is a plus
• Experience in analytics, aerospace, defense, or adjacent complex product environments is a plus
• Strong expertise in cash flow management and working capital optimization
• Advanced proficiency in Excel, financial modeling, and data analysis tools
• Demonstrated ability to lead process improvement initiatives in a finance function
• Excellent communication and presentation skills, with the ability to convey complex financial information in an understandable manner
• Proven track record of managing multiple projects in a deadline-driven environment
• Ability to work autonomously with minimal direction, take ownership of ambiguous workstreams, and drive deliverables to completion
• Experience with financial reporting tools and ERP systems (i.e. Anaplan, Oracle, Foundry)
• Must be authorized to work in the United States

ABOUT THE JOB

As a Manufacturing Engineering Technician, you’ll play a critical part in ensuring production operations run smoothly and efficiently. Your primary responsibility will be responding to and resolving production system issues in real-time, leveraging your strong Linux knowledge and troubleshooting skills to unblock a plethora of problems ranging from networking to hardware connectivity on our Group 3 UAS platform: Altius. Working closely with our Production Operations, Manufacturing Engineering, and Software Engineering teams, you will focus on diagnosing problems, curating and documenting troubleshooting workflows, and escalating deeper technical challenges to engineering support. 

This role combines on-the-ground technical troubleshooting, operational rigor, and proactive process improvement. You’ll act as the first line of defense for keeping production systems up and running, ensuring minimal downtime for critical manufacturing processes. Key to success in this role will be robust Linux systems expertise, strong communication, and strong collaboration skills. You’ll also have opportunities to impact long-term improvements by building tools, scripts, and documentation to streamline future troubleshooting efforts.

WHAT YOU'LL DO

• Provide hands-on, real-time technical support to resolve Linux-based production system issues.
• Debug hardware, software, and networking faults using diagnostic tools like logs, network traffic analyzers (e.g., Wireshark)
• Investigate and resolve recurring issues such as system bricking, connectivity problems, and compatibility errors
• Develop, maintain, and curate documentation, troubleshooting guides, and standard operating procedures (SOPs) for common problems
• Collaborate with cross-functional teams to escalate complex issues and drive systemic problem resolution
• Use Bash/Python scripting to build lightweight tools and automate repetitive debugging tasks
• Advocate for systems/process improvements, and communicate tooling needs to engineering teams responsible for long-term solutions
• Support production technicians when systems become blocked and ensure seamless handoffs with second-line support (T2 escalation)

REQUIRED QUALIFICATIONS

• 2+ years of hands-on experience with Linux systems in a troubleshooting or support role.
• Proficiency with Bash scripting/familiarity with Python
• Strong understanding of diagnostic tools
• Demonstrated ability to troubleshoot and triage hardware and software issues
• Experience operating in high-pressure environments where uptime is critical (manufacturing, robotics, IoT, cloud systems, etc.)
• Effective communication skills with the ability to distill technical findings into actionable plans for technical and non-technical stakeholders
• Experience collaborating with cross-functional teams in a production or technical support setting
• Willingness to work production hours and overtime as needed

PREFERRED QUALIFICATIONS

• Familiarity with manufacturing or robotics systems with Linux-based deployments
• Interest in automation devices, home electronics, or personal projects involving Arduino, Raspberry Pi, or similar technologies
• Knowledge of hardware troubleshooting, including connectors, harnesses, and pin configurations
• Experience documenting and curating detailed knowledge bases, workflow tools, or SOPs
• Exposure to enterprise-scale systems, IoT devices, or environments with similar high-availability requirements
• A passion for figuring out complex systems, diving deep into logs, and building tools to improve future workflows

ABOUT THE TEAM

Anduril’s Tactical Recon & Strike (TRS) is a division with two missions: 1) build highly capable autonomous drones, and 2) build solid rocket motors at scale. We transform products like Ghost, Anvil, Bolt, and Altius from early concepts into fully operational capabilities by partnering closely with specialist engineering, operations, and production teams. Through our Anduril Rocket Motor Systems (RMS) team, we design and manufacture solid rocket motors using advanced materials, proprietary formulations, and high-volume production methods—delivering safe, reliable propulsion systems that support a wide range of mission requirements. TRS hires software engineers & hardware engineers, who are excited to build across a diverse and powerful portfolio—from autonomous aerial systems to high-performance solid rocket motors. Our teams contribute to highly capable autonomous robotics systems and propulsion products that operate reliably in the most demanding mission environment.

ABOUT THE JOB

The Mission Operations team is responsible for managing the execution, growth, and success of our client accounts. Working across product, engineering, sales, and logistics teams, our Mission Operations Engineers own the client relationships and develop, plan, and deploy Anduril products in support of their missions. They work side-by-side with clients to understand their specific problem sets and then shape Anduril's offerings alongside our engineering teams to fit the mission needs. Because the problems we solve are uniquely challenging, our Mission Operations Engineers naturally gravitate toward finding solutions and are adept at navigating organizational hurdles. They are ultimately responsible for client and mission success and therefore play a critical role in the shaping and future of Anduril Industries

• Serve as a customer-facing Account Manager. This position is in-office and will be located in Atlanta, GA, but will require nationwide and international travel to service and manage forward deployed accounts (up to 75% travel). You will be working directly with a key strategic partners to develop and deploy Anduril’s ALTIUS UAS and other TRS products and to meet customer and operational needs. You will own the execution of contract deliverables to include developing and implementing measures of performance and effectiveness, writing technical reports, and creating user engagement roadmaps.
• Support engagement with all service components of the US DOD, local government organizations, and other partner nation’s defense forces as required to integrate Anduril products laterally for increased adoption.
• Orchestrate the deployment of Anduril products. Lead the planning and deployment of Anduril’s flagship products in support of client missions. Through collaboration with our engineering, logistics, and technical operations teams, Mission Operators are in charge of deploying our products to the field, training end users, and ensuring the high performance of our products. We are obsessed about engagement and keeping our finger on the pulse of how clients interact with our products. This helps us improve the user experience and evolve their operational tactics and techniques. If something isn’t quite right, we work with product teams to quickly address the issue on behalf of our client.
• Grow your business through client success. In addition to the operational and executive relationships you own, you will be responsible for meeting commercial targets that drive top line growth. This requires establishing committed and trust-based partnerships with our clients to not only help them solve their immediate problems, but also to foresee future opportunities where Anduril's technology can make them more effective. Understanding Anduril's value proposition and articulating how we can have an impact on a client’s problem set, from the executive level to the end user, is critical to positioning Anduril for the future.
• Shape our products to meet mission needs. Work side-by-side with our clients to understand their specific mission challenges and represent the client as you work with Anduril engineers to shape products that solve critical national and international security challenges. Engineers rely on Mission Operators to understand the lay of the land and bring a perspective that informs the product development process.
• Collaborate across nearly every Anduril. Successfully deploying our complex hardware and software products requires collaborating with nearly every internal team - engineering, product, logistics, finance, legal, contracting, technical operations, and many more. You’ll be responsible for ensuring each party is engaged and informed, and will therefore become well-versed in what it takes to really bring the best of our products to our clients.
• Translate customer requirements and technical information in support of program contract deliverables and development of Anduril products to meet customer operational needs. Essentially, you will ensure the end user’s needs are incorporated and represented in the design and function of our products.

WHAT YOU'LL NEED

• Mission First Mindset. We put the needs of the mission and our clients first and understand that the US and its allies have no preordained right to victory in any future conflict. We actively seek out opportunities to better understand our clients’ mission needs, with a goal to build the best possible products for the warfighter and radically evolve our national and international defense capabilities. We push ourselves and the limits of our capabilities in the pursuit of this goal.
• Ownership Mentality. We’re looking for owners; those who have a natural bias to assume responsibility, a healthy dose of skepticism, and contribute to a culture of performance. We empower our Mission Operators to quickly assume high levels of responsibility and entrust them to actively own their account and shape its success. Our Mission Operators are just as comfortable helping to shape a proposal or pitch a new client as they are working with engineers on new features or deploying products in the field.
• Technical Aptitude and Intellectual Curiosity. We are first and foremost a technology company, working at the leading edge of capabilities like machine learning, autonomy, distributed networking, and multi-modal sensor fusion. Do you have a natural desire to see beyond simple cause and effect relationships to really understand how complex systems operate? Do you actively seek out opportunities to educate yourself? These capabilities form the foundation of our product offerings, so we are looking for those who are comfortable communicating technical concepts and can articulate them in the context of the client’s mission.
• Structured Thinker and Problem Solver. Leading technical programs requires clear communication and well thought-out plans. We are looking for assertive communicators who bring a thoughtful perspective and honest dialogue. A solution-driven approach, the ability to distill complexity into its essential, digestible components, and the ability to supervise execution are critical to ensure mission success.
• High Value Team Member. Do you enjoy working as part of a team? At Anduril, the path to success weaves through the organization - account teams, engineering, logistics, technical operations, and more. It requires humility, an eagerness to learn, and empathy toward your fellow team member. We assume best intentions and empathize with clients just as we do with our colleagues. Can you develop rapport at both the user and executive levels? Do you enjoy sharing successes? We are a low ego group that promotes teamwork and collaboration to bring about success.
• 360 Degree Leader. We are a flat, non-hierarchical organization with a matrix structure that is dynamic and evolving. We expect you to be self-aware enough to recognize your position of unstated leadership within the company. You should have a demonstrated ability to lead and influence people through both formal and informal constructs and in situations where there is lack of clarity across teams. Finally, we need people who identify gaps and breakdowns and solve them immediately, rather than point them out and step back. You should also seek 360 feedback to help inform your growth trajectory as a leader.

QUALIFICATIONS

• Experience with programming, scripting, or networking a plus
• Prior military or contracting experience can be helpful
• PMP or similar certifications a plus
• Travel up to 75%
• US Person Status is required, as this position needs to access export-controlled data.

PREFERRED QUALIFICATIONS

• Experience and familiarity with US defense posture and policy
• Direct experience leading and developing military operational planning, targeting, and fires systems and workflows
• Working level understanding of NATO and our ally’s defense and national security policy, budgeting process, public-private partnerships
• Familiarity with or direct experience working in partnership with host nation’s defense forces, Joint Staff, and Ministry of Defense and understanding of their respective organizational structures and interests
• Familiarity with doctrinal, functional, and technical command and control concepts, processes, and principles
• Prior military or government acquisition and/or government contracting experience

ABOUT THE TEAM:

Anduril’s Tactical Recon & Strike (TRS) Division is seeking a Program Manager to join our team. Anduril’s Tactical Recon & Strike (TRS) is a division with two missions: 1) build highly capable autonomous drones, and 2) build solid rocket motors at scale. We transform products like Ghost, Anvil, Bolt, and Altius from early concepts into fully operational capabilities by partnering closely with specialist engineering, operations, and production teams. Through our Anduril Rocket Motor Systems (RMS) team, we design and manufacture solid rocket motors using advanced materials, proprietary formulations, and high-volume production methods—delivering safe, reliable propulsion systems that support a wide range of mission requirements. TRS hires software engineers & hardware engineers, who are excited to build across a diverse and powerful portfolio—from autonomous aerial systems to high-performance solid rocket motors. Our teams contribute to highly capable autonomous robotics systems and propulsion products that operate reliably in the most demanding mission environment. We work in close coordination with specialist teams to solve some of the hardest problems facing our customers.

Anduril is seeking a highly skilled, mission-driven, highly organized, detail-oriented, and responsive Program Manager to provide critical tactical support and operational oversight for our strategic defense clients, driving the adoption, expansion, and long-term success of Anduril's cutting-edge Launched Effects. You will serve as a trusted advisor, deeply understanding client operational requirements and translating them into impactful solutions that leverage our solutions. This role requires a unique blend of strategic thinking, technical aptitude, exceptional relationship-building skills, and a passionate commitment to national security. In addition, this role achieves results by focused on the day-to-day management of client accounts, ensuring the smooth deployment, ongoing functionality, and optimal performance of Anduril's Launched Effects solutions. You will be the primary point of contact for operational queries, issue resolution, logistics coordination, and direct support to ensure our military and government customers' success.

• Strategic Client Engagement:
• Serve as the lead point of contact for key defense accounts focused on Launched Effects solutions, establishing and nurturing strong, enduring relationships with military leadership, program offices, and operational end-users.
• Develop a deep understanding of client mission objectives, operational environments, and strategic priorities to proactively identify and position Anduril's Launched Effects products.
• Navigate complex government procurement processes, contracting mechanisms (e.g., DIU, SBIR, OTA), and funding cycles to ensure successful program execution and growth.
• Champion client needs internally, collaborating closely with Anduril's Engineering, Product, and Integration teams to inform product roadmap and ensure timely, high-quality solution delivery.
• Daily Client Operations & Support:
• Serve as the primary point of contact for assigned clients, managing day-to-day communications, operational requests, and urgent support needs related to Launched Effects product line.
• Address client inquiries promptly and effectively, providing direct solutions or coordinating with internal technical support, engineering, and logistics teams for rapid resolution of issues.
• Track and document all client interactions, support tickets, and operational feedback in the CRM system (e.g., Salesforce) with meticulous detail.
• Ensure clients receive timely updates on product enhancements, revisions, and relevant technical documentation.
• Solution Adoption & Growth:
• Drive the successful adoption and integration of Anduril's Launched Effects products into client operations, demonstrating clear mission value and operational superiority.
• Identify and cultivate opportunities for expansion within existing accounts, including upselling new features, capabilities, cross-selling adjacent Anduril technologies, and securing follow-on contracts.
• Develop comprehensive account plans, sales strategies, and proposals that align with client requirements and Anduril's strategic objectives.
• Conduct compelling technical demonstrations, presentations, and product briefings to diverse audiences, from technical specialists to general officers.
• Tactical Execution & Deliverables:
• Coordinate the scheduling and logistics for product demonstrations, training sessions, and field support visits with clients and internal teams.
• Monitor the operational status and usage data of deployed Launched Effects products, proactively identifying potential issues or areas for improvement in coordination with technical teams.
• Process and track client orders for system upgrades, spare parts, consumables, and additional training modules.
• Facilitate contract renewals by ensuring all terms and conditions of current agreements are met and documented.
• Prepare and deliver routine operational status reports, usage metrics, and support summaries to clients and internal stakeholders.
• Internal Coordination & Problem Solving:
• Act as the liaison between client operational teams and Anduril's internal engineering, product, and field support teams to ensure client requirements are accurately relayed and understood for immediate action.
• Troubleshoot basic technical issues on-site or remotely, escalating complex problems to the appropriate technical experts.
• Support the integration and qualification and testing of new Launched Effects system by coordinating client access and feedback.
• Assist in identifying and documenting client needs for future product features based on immediate operational feedback.
• Performance & Reporting:
• Forecast and track key account metrics, including revenue targets, program milestones, and operational deployment success.
• Provide regular, insightful reports to internal leadership on account status, strategic opportunities, competitive landscape, and challenges.
• Manage contract negotiations, ensuring favorable terms that support long-term partnerships and Anduril's business goals.
• Domain Expertise & Market Intelligence:
• Maintain an expert-level understanding of Anduril's Launched Effects product portfolio, including technical specifications, operational advantages, and future development pathways.
• Stay abreast of industry trends in rocket motor systems, applications and defense technologies, as well as evolving national security threats and doctrine.
• Gather and synthesize client feedback and market intelligence to contribute to Anduril's product development and competitive strategy.
• Compliance & Documentation:
• Ensure all client activities comply with contractual agreements, security protocols, and relevant government regulations.
• Maintain accurate and up-to-date client records, contact information, and equipment inventory.

REQUIRED QUALIFICATIONS:

• Education & Experience:
• Bachelor's degree in a technical field (e.g., Engineering, Computer Science), Business Administration, or a related discipline.
• 5+ years of progressive experience in program/project management, sales, or business development within the defense, aerospace, or government contracting sector.
• Demonstrated experience with unmanned aerial systems (UAS), autonomous platforms, AI/ML applications, or Launched Effects technologies is highly desirable.
• Active Secret or Top Secret security clearance, or the ability to obtain and maintain one, is required.
• Demonstrated ability to manage multiple tasks, prioritize effectively, and maintain exceptional attention to detail in a fast-paced environment.
• Proven track record of successfully managing complex client relationships and closing significant contracts with U.S. government entities (DoD, IC, etc.).
• Prior military experience, especially in an operational or procurement role related to advanced systems, is a significant advantage.
• Skills & Competencies:
• Exceptional verbal and written communication skills, presentation, and interpersonal skills, with the ability to articulate complex technical concepts to both technical and non-technical audiences.
• Strong strategic thinking and problem-solving abilities, with a capacity to connect client needs to innovative technical solutions.
• Proficiency in using CRM software (e.g., Salesforce) for documentation, tracking, and reporting. Includes program management tools.
• Ability to coordinate logistics, schedules, and resources efficiently.
• Highly responsive, proactive, and client-focused with a strong sense of urgency.
• Demonstrated ability to negotiate effectively, manage multiple priorities, and thrive in a fast-paced, high-stakes environment.
• Relentless commitment to supporting national security missions and delivering operational excellence.
• A deep sense of mission and commitment to strengthening national security through technological innovation.
• Ability to travel frequently (up to 50% or more) to client sites, operational environments, and Anduril facilities as required.

ABOUT THE TEAM

Anduril’s Tactical Reconnaissance & Strike (TRS) Finance group is seeking a Finance Analyst to join our team and support across multiple business lines. This role will support core FP&A responsibilities (close insights, forecasting, budgeting, and executive reporting) while leading a variety of special projects and/or ad-hoc analyses in support of the finance department and company initiatives. This role partners closely with Engineering, Product, Program Management, Growth, and Contracts to improve execution, investment decisions, and overall business performance.

ABOUT THE JOB

As a Financial Analyst, you will be responsible for EAC budgeting and maintenance, income statement and balance sheet forecasting, and internal reporting requirements under the Anduril Tactial Recon & Strike business lines. In this role you will support multiple contracts in parallel and interact closely with program management, functional stakeholders, and business line leadership to ensure Anduril is delivering on its financial commitments. You should be comfortable supporting and explaining financial contract performance and variance analysis to cross functional teams and executives. This is a critical role in a fast-growing company that is looking for problem solvers and innovators.

WHAT YOU’LL DO

• Work with program management to develop and maintain ETC forecasts and EAC integrity
• Contract profit margin analysis and surveillance
• Income statement and balance sheet forecasting by contract and business line
• Weekly, monthly, and ad hoc financial reporting to program management and business line leadership
• Review the month-end close output for the Intelligence business lines, ensuring monthly revenue is appropriate and reflects actual performance on the contracts
• Support quarterly business reviews, long range planning, and other management data calls
• Look around the corner to mitigate future potential issues and implement best practices and process improvements
• Participate in special projects or ad-hoc analysis in support of finance department and company initiatives

REQUIRED QUALIFICATIONS

• Bachelor’s Degree or above in Finance or related field
• 2+ years experience as a financial analyst
• Ability to operate independently in a fast paced environment
• Strong time management skills with ability to manage multiple tasks simultaneously and meet deadlines under pressure
• Able to understand and communicate financial performance and variance analysis to stakeholders
• Customer service mindset
• Proficiency in Microsoft Excel
• Must be a U.S. Person due to required access to U.S. export controlled information or facilities

PREFERRED QUALIFICATIONS

• Defence and/or Tech industry experience

ABOUT THE TEAM

Anduril’s Tactical Recon & Strike (TRS) is a division with two missions: 1) build highly capable autonomous drones, and 2) build solid rocket motors at scale. We transform products like Ghost, Anvil, Bolt, and Altius from early concepts into fully operational capabilities by partnering closely with specialist engineering, operations, and production teams. Through our Anduril Rocket Motor Systems (RMS) team, we design and manufacture solid rocket motors using advanced materials, proprietary formulations, and high-volume production methods—delivering safe, reliable propulsion systems that support a wide range of mission requirements. TRS hires software engineers & hardware engineers, who are excited to build across a diverse and powerful portfolio—from autonomous aerial systems to high-performance solid rocket motors. Our teams contribute to highly capable autonomous robotics systems and propulsion products that operate reliably in the most demanding mission environment.

ABOUT THE JOB

As a Robotics Software Engineer on our TRS team, you'll be at the forefront of cutting-edge autonomous systems development. You'll tackle diverse challenges in autonomy, systems integration, robotics, and networking, making critical engineering decisions that directly impact mission success. Your role will be pivotal in ensuring Anduril's products work seamlessly together to achieve a variety of crucial outcomes. You'll develop innovative solutions for complex robotics problems, balance pragmatic engineering trade-offs with mission-critical requirements, and collaborate across teams to integrate software with hardware systems. Contributing to the entire product lifecycle, from concept to deployment, you'll rapidly prototype and iterate on software solutions. We're looking for someone who thrives in a fast-paced environment and isn't afraid to tackle ambiguous problems. Your "Whatever It Takes" mindset will be key in executing tasks efficiently, scalably, and pragmatically, always keeping the mission at the forefront of your work. This role offers the opportunity to make a significant impact on next-generation defense technology, working with state-of-the-art robotics and autonomous systems. You'll be part of a team that values innovation, quick iteration, and delivering high-quality solutions that meet real-world needs.

Must be eligible to obtain and maintain an active U.S. Secret security clearance. This position will be located at our office in Atlanta, GA (relocation benefits provided.)

WHAT YOU'LL DO

• Develop and maintain core robotics libraries, including frame transformations, targeting, and guidance systems, that will be utilized across all Anduril robotics platforms
• Lead the development and implementation of major features for our products, such as designing and building Software-in-the-Loop simulators for advanced systems like Altius
• Optimize performance of existing products, primarily focused on our Altius Drone product line
• Collaborate closely with hardware and manufacturing teams throughout the product development lifecycle, providing timely feedback to influence and enhance final hardware designs
• Troubleshoot and resolve complex issues in deployed systems, ensuring optimal performance in the field
• Contribute to the design and implementation of multi-agent coordination systems for UAVs
• Participate in the full software development lifecycle, from concept and design through testing and deployment
• Stay current with emerging technologies and industry trends, recommending and implementing innovations to improve our products and processes

REQUIRED QUALIFICATIONS

• Bachelor's degree in Robotics, Computer Science, or related field
• 7+ years of professional software development experience
• Strong proficiency in C++ or Rust, with experience in Linux development environments
• Demonstrated expertise in data structures, algorithms, concurrency, and code optimization
• Proven experience troubleshooting and analyzing remotely deployed software systems
• Hands-on experience working with and testing electrical and mechanical systems
• Ability to collaborate effectively with cross-functional teams, including hardware and manufacturing
• Strong problem-solving skills and a "Whatever It Takes" mindset
• Excellent communication skills, both written and verbal
• Eligible to obtain and maintain an active U.S. Secret security clearance
• Willingness to relocate to Atlanta, GA 

PREFERRED QUALIFICATIONS

• Master's or Ph.D. in a relevant field (e.g., Robotics, Computer Science, Electrical Engineering)
• Expertise in one or more advanced robotics areas: motion planning, perception, localization, mapping, or controls
• Experience with performance optimization and metrics for complex robotic systems
• Proficiency in Python, Rust, and/or Go, in addition to C++
• Hands-on experience programming for embedded systems and physical devices
• Background in multi-agent coordination, particularly with UAVs
• Demonstrated ability to solve complex frame transformation problems (e.g., target localization, multi-degree-of-freedom robotic arms)
• Experience with real-time operating systems and distributed computing
• Familiarity with machine learning and AI applications in robotics
• Knowledge of sensor fusion techniques and implementation
• Understanding of aerodynamics and flight dynamics as applied to UAV systems
• Experience with simulation environments for robotics testing and development
• Track record of contributions to open-source robotics projects or relevant publications

WHAT YOU’LL DO

• Design, build, and commission automated manufacturing systems to improve production throughput, product quality, and operator safety
• Work with product-specific design & manufacturing teams to scope the appropriate level of automation
• Own the design and integration of automation cells including robot / cobot applications, conveyance, bespoke electromechanical systems, and automated inspection  
• Work with IE and Facilities teams to lay out production lines in new and existing Anduril factories
• Generate 2D and 3D CAD files for automation lines and their systems / components
• Enforce and contribute to Anduril’s internal processes & standards, including requirements definition, vendor solicitation, commissioning sequences, and safety buyoffs
• Partner with cross-functional teams to troubleshoot equipment issues, reduce downtime, and drive continuous improvement initiatives

REQUIRED QUALIFICATIONS 

• Bachelor's degree in Robotics, Computer Science, Mechanical Engineering,
  Electrical Engineering, or similar
• 6+ years of experience designing and commissioning automated production equipment
• Proficient CAD modeling in NX, Solidworks or AutoCAD
• Proficient in Robot / Cobot selection and integration, including path planning, EOAT design, dresspacks, and safety
• Experience with at least one major conveyance system (fixed/palletized, AGV/AMR, slat, overhead carrier, etc)
• Experience integrating various control components including PLCs, HMIs, pushbuttons, stack lights, safety scanners, etc
• Must be a U.S. Person due to required access to U.S. export controlled information or facilities

PREFERRED QUALIFICATIONS 

• 9+ years of experience designing and commissioning automated production equipment
• Strong 3D CAD in NX
• Experience with automated dispense systems (adhesives, TIMs, paint, coatings, etc)
• Experience with multiple conveyance systems (fixed/palletized, AGV/AMR, slat, overhead carrier, etc)
• Experience with control panel layout, electrical component selection, and cable routing
• Experience integrating with MES and QMS

Note: This position will be four 10-hour work shifts per week.  Hours are 3:30pm - 2am, Monday -Thursday

ABOUT THE JOB

As a Manufacturing Engineering Technician, you’ll play a critical part in ensuring production operations run smoothly and efficiently. Your primary responsibility will be responding to and resolving production system issues in real-time, leveraging your strong Linux knowledge and troubleshooting skills to unblock a plethora of problems ranging from networking to hardware connectivity on our Group 3 UAS platform: Altius. Working closely with our Production Operations, Manufacturing Engineering, and Software Engineering teams, you will focus on diagnosing problems, curating and documenting troubleshooting workflows, and escalating deeper technical challenges to engineering support. 

This role combines on-the-ground technical troubleshooting, operational rigor, and proactive process improvement. You’ll act as the first line of defense for keeping production systems up and running, ensuring minimal downtime for critical manufacturing processes. Key to success in this role will be robust Linux systems expertise, strong communication, and strong collaboration skills. You’ll also have opportunities to impact long-term improvements by building tools, scripts, and documentation to streamline future troubleshooting efforts.

WHAT YOU'LL DO

• Provide hands-on, real-time technical support to resolve Linux-based production system issues.
• Debug hardware, software, and networking faults using diagnostic tools like logs, network traffic analyzers (e.g., Wireshark)
• Investigate and resolve recurring issues such as system bricking, connectivity problems, and compatibility errors
• Develop, maintain, and curate documentation, troubleshooting guides, and standard operating procedures (SOPs) for common problems
• Collaborate with cross-functional teams to escalate complex issues and drive systemic problem resolution
• Use Bash/Python scripting to build lightweight tools and automate repetitive debugging tasks
• Advocate for systems/process improvements, and communicate tooling needs to engineering teams responsible for long-term solutions
• Support production technicians when systems become blocked and ensure seamless handoffs with second-line support (T2 escalation)

REQUIRED QUALIFICATIONS

• 2+ years of hands-on experience with Linux systems in a troubleshooting or support role.
• Proficiency with Bash scripting/familiarity with Python
• Strong understanding of diagnostic tools
• Demonstrated ability to troubleshoot and triage hardware and software issues
• Experience operating in high-pressure environments where uptime is critical (manufacturing, robotics, IoT, cloud systems, etc.)
• Effective communication skills with the ability to distill technical findings into actionable plans for technical and non-technical stakeholders
• Experience collaborating with cross-functional teams in a production or technical support setting
• Willingness to work production hours and overtime as needed

PREFERRED QUALIFICATIONS

• Familiarity with manufacturing or robotics systems with Linux-based deployments
• Interest in automation devices, home electronics, or personal projects involving Arduino, Raspberry Pi, or similar technologies
• Knowledge of hardware troubleshooting, including connectors, harnesses, and pin configurations
• Experience documenting and curating detailed knowledge bases, workflow tools, or SOPs
• Exposure to enterprise-scale systems, IoT devices, or environments with similar high-availability requirements
• A passion for figuring out complex systems, diving deep into logs, and building tools to improve future workflows

Note: This position will be four 10-hour work shifts per week.  Hours are 3:30pm - 2am, Monday -Thursday

ABOUT THE JOB

We are looking for Software Engineers to join our rapidly growing team! We have positions open in Costa Mesa, CA. These roles are targeted to start on a quarterly basis beginning in 2026. We hire self-motivated people, those who hold a higher bar for themselves than anyone else could hold for them. If you are eager to solve tough problems, then this role might be for you! 

WHAT YOU’LL DO

• Support the software solutions that are deployed to customers and key stakeholders.
• Write code to improve products and scale the mission capability to more customers.
• Collaborate across multiple teams to plan, build, and test complex functionality.
• Create and analyze metrics that are leveraged for debugging and monitoring.
• Triage issues, root cause failures, and coordinate next-steps.
• Work on real, meaningful projects and learn from experienced professionals along the way.

REQUIRED QUALIFICATIONS

• Must be pursuing or have completed a Bachelor’s or Master’s degree in Computer Science, Computer/Software Engineering, Mathematics, Physics, or a related field.
• 3 months - 2 years of technical work to include technical internship and able to start full time in 2026. 
• Familiarity with algorithms, data structures, storage systems, cloud infrastructure, front-end frameworks, and other technical tools.
• Proficiency in a variety of programming languages such as C++, Go, Rust, Java, and Python.
• A desire to work on software and applications that have real-world impact.
• Must be a U.S. Person due to required access to U.S. export controlled information or facilities; U.S. clearance eligibility may be required depending on program.

PREFERRED QUALIFICATIONS

• Have a bias for action. If you see a problem, you want to solve and fix it.
• Be naturally curious about the technologies and tools you use.
• Low-ego, high ownership, and mission oriented.

Anduril is an equal-opportunity employer, and we encourage candidates from all backgrounds to apply. If you are someone passionate to work on problems that matter, we’d love to hear from you!

ABOUT THE TEAM

The Tactical Recon & Strike team at Anduril develops aerial small drones (Group 1-3) and all equipment to test, deploy and operate. The team is responsible for taking products like Ghost, Anvil, Bolt and Altius from paper sketches to operational systems. We work in close coordination with specialist teams to solve some of the hardest problems facing our customers. We are looking for software engineers, hardware engineers, roboticists, and front-end mobile developers who are excited about creating a powerful robotics platform that can be tasked and viewed in real-time through a variety of interfaces.

ABOUT THE ROLE

We are looking for a Senior Firmware Engineer to join our team in Atlanta! 

WHAT YOU’LL DO

• Develop and ship production firmware for avionics, launch and ground support solutions, integrating with embedded Linux-based software and electro-mechanical end-to-end systems
• Implement and share ownership of existing CICD pipelines (evaluation hooks, performance/quality guardrails, and integration surfaces)
• Design and implement fault-tolerant low-level firmware drivers, middleware, and application software for microcontrollers in an RTOS environment (e.g., Zephyr), effectively managing concurrency and resource sharing through mutexes, semaphores, message queues, and event flags
• Collaborate on architecture and design emphasizing balance between loosely coupled concepts while considering determinism, complexity, stability, latency, power and memory constraints.
• Build firmware evaluation tools that interrogate code at compile-time and runtime, for quality, ruggedness and performance, in both virtual and on-target environments
• Help select microcontrollers and peripherals and review schematics with electrical engineering team
• Partner cross-functionally (software, hardware, mechanical, test and automation) to debug, profile and harden systems to persist in the face of real-world challenges

REQUIRED QUALIFICATIONS

• BS or MS in CS/CE/EE or equivalent industry experience
• Experience: 7+ years of experience in firmware/embedded software development, with a focus on embedded systems.
• Strong C or C++ coding ability for embedded systems
• Experience integrating microcontrollers with analog and digital sensors
• Extensive experience with popular RTOS platforms and a strong understanding of real-time scheduling algorithms and task management
• Experience developing firmware in bare-metal environments
• Solid understanding and application of coding best practices, board bring up and debugging
• Debugging skills with JTAG, SWD, Oscilloscopes, and Logic analyzers
• Familiarity with common bus protocols such as USB, SPI, I2C, CAN, RS232, RS485, Ethernet, etc.
• Experience running unit tests, nightly build hardware in the loop validations, static code analysis
• Experience operating and deploying Continuous Integration Tools (ie. Jenkins, CircleCI, JFrog Artifactory) and automatic build environments (Ninja, Cmake, Makefiles, etc.)
• U.S. Persons status is required as this position needs to access export controlled data

PREFERRED QUALIFICATIONS

• Experience with one or more microcontroller cores (ARM, AVR, MSP430, PIC, etc.)
• Have a bias for action. If you see a problem, you want to solve and fix it
• Experience developing custom boards within the Zephyr RTOS ecosystem
• Be naturally curious about the technologies and tools you use

ABOUT THE TEAM

Anduril’s Tactical Recon & Strike (TRS) is a division with two missions: 1) build highly capable autonomous drones, and 2) build solid rocket motors at scale. We transform products like Ghost, Anvil, Bolt, and Altius from early concepts into fully operational capabilities by partnering closely with specialist engineering, operations, and production teams. Through our Anduril Rocket Motor Systems (RMS) team, we design and manufacture solid rocket motors using advanced materials, proprietary formulations, and high-volume production methods—delivering safe, reliable propulsion systems that support a wide range of mission requirements. TRS hires software engineers & hardware engineers, who are excited to build across a diverse and powerful portfolio—from autonomous aerial systems to high-performance solid rocket motors. Our teams contribute to highly capable autonomous robotics systems and propulsion products that operate reliably in the most demanding mission environment.

THE ROLE

This position is on the TRS Core Infrastructure team and will be focused on building the infrastructure to field TRS Products such as Altius, Ghost, Bolt and Anvil. Our charter is to provide the foundation for teams across Anduril to deploy cutting edge TRS autonomy and to tie it all together into an easy-to-use product. The solutions that you will create address the current needs of our customers and will have immediate impact towards the success of our products.

WHAT YOU'LL DO

• Design, build, test, and release the testing infrastructure used during development & validation of Anduril Products including Software in the Loop (SITL) and Hardware in the Loop (HITL).
• Collaborate with cross-functional teams to integrate automated testing best practices into the software development lifecycle.
• Build tools in Python to facilitate development, testing, and release.
• Develop and maintain continuous integration/continuous delivery (CI/CD) pipelines.
• Interface with engineers developing every aspect of the system from low-level Linux drivers to cutting edge autonomy and streamlined user interfaces.
• Ensure that the testing infrastructure is robust and ready to facilitate the rapid development needed to keep pace with emerging product needs.

REQUIRED QUALIFICATIONS

• At least 3+ years working with a variety of programming languages such as Python, Rust, C++, Go, etc.
• Want to work on building the tools that engineers and technicians will use to ensure that Anduril products are ready to be deployed.
• Experience with modern build and deployment tooling (e.g. CircleCI, Docker, NixOS, Terraform).
• Are passionate about developer experience and always strive to provide the most streamlined testing pipeline.
• Have an intuition for finding solutions to complex problems that involve multiple first and third party technologies (related to simulation, data management, compute infrastructure, networking, and more).
• Enjoy collaborating with team members and partners in the autonomy domain, and building technologies and processes which enable engineers to rapidly develop and test autonomous systems at scale.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

PREFERRED QUALIFICATIONS

• You've built or invented something: an app, a website, game, startup.
• Previous experience working in an engineering setting: a startup (or startup-like environment), engineering school, etc.
• Professional software development lifecycle experience using tools such as version control, CI/CD systems, etc.
• A deep, demonstrated understanding of how computers and networks work, from a single desktop to a multi-cluster cloud node (UDP, TCP, gRPC, REST, etc.).
• Have built user interfaces using popular frontend frameworks (React, PySide, etc.).
• Experience creating automated Software in the Loop (SITL) and Hardware in the Loop (HITL) tests for robotics or embedded products.
• Experience building scalable backend software systems with various data storage and processing requirements.
• Experience with industry standard cloud platforms (AWS, Azure), CI/CD tools, and software infrastructure fundamentals (networking, security, distributed systems).
• Ability to quickly understand and navigate complex systems and established code bases.
• Experience designing complex software systems, and iterating upon designs via a technical design review process.
• Familiarity with industry standard monitoring, logging, and data management tools and best practices.
• A bias towards rapid delivery and iteration.

ABOUT THE JOB

In this role, you will support the Altius business line by contributing your technical expertise and fostering strategic collaboration across various hardware and software development teams. As a valued member of our team, you will play an integral role in developing and testing innovative solutions designed to address real-world challenges. This position underscores the importance of an iterative approach to our operations - design, test, field, and refine - thereby driving continuous improvement of our systems and services.

If you are someone who has hands-on experience throughout the entire new product development life cycle from concept to customer delivery, loves to build world-class product reliability, work with many multi-disciplinary teams, and be accountable for results, then this role is for you.

WHAT YOU'LL DO

• Own various approaches to achieve product development goals through end-to-end product testing and operating procedural definition.
• Interface with internal operations and product teams to identify and solve system or product reliability issues.
• Conduct end-to-end testing to establish robust QA matrices for our products.
• Drive continuous improvement initiatives to enhance engineering processes and efficiency.
• Formulate and refine operational procedures and workflows.
• Train colleagues on the procedures and workflows developed for new engineering capabilities.
• Provide valuable feedback to engineering teams to improve product functionality.
• Lead new project initiatives, focusing on product operations and user maintenance planning.
• Architect and implement cutting-edge sustainment strategies for advanced defense systems.
• Spearhead the development of comprehensive lifecycle support plans for Anduril's innovative products.
• Collaborate with cross-functional teams to optimize product design for long-term supportability.

REQUIRED QUALIFICATIONS

• Strong aptitude for problem solving in unstructured situations at the interface of hardware, software, and networking. Ability to drive challenging and vague technical problems to clarity and resolution.
• Experience working on advanced hardware systems.
• Familiarity with government testing protocols, compliance, and regulations.
• Experience with Aircraft Reliability Engineering.
• Must be eligible to obtain and maintain a U.S. Secret security clearance.
• Ability to travel as required for planning and testing (30%).

PREFERRED QUALIFICATIONS

• Technical writing experience developing standards, specifications, user guides, and policies.
• Proficiency in CAD software and product lifecycle management tools.
• Aircraft, spacecraft, or UAV operations experience.
• Training experience.
• Minimum of 3 years industry experience. 
• Prior military or government agency exposure / experience.

ABOUT THE TEAM

Anduril’s Tactical Recon & Strike (TRS) is a division with two missions: 1) build highly capable autonomous drones, and 2) build solid rocket motors at scale. We transform products like Ghost, Anvil, Bolt, and Altius from early concepts into fully operational capabilities by partnering closely with specialist engineering, operations, and production teams. Through our Anduril Rocket Motor Systems (RMS) team, we design and manufacture solid rocket motors using advanced materials, proprietary formulations, and high-volume production methods—delivering safe, reliable propulsion systems that support a wide range of mission requirements. TRS hires software engineers & hardware engineers, who are excited to build across a diverse and powerful portfolio—from autonomous aerial systems to high-performance solid rocket motors. Our teams contribute to highly capable autonomous robotics systems and propulsion products that operate reliably in the most demanding mission environment.

ABOUT THE JOB

We are looking to bring on a Electrical Test engineer to design and deliver test systems for Anduril’s electronic products. This person will work with the cross-functional organizations to identify gaps in test coverage and own the design and delivery of the hardware and software test solution. A strong Test Design Engineer will need to have a proven track record of delivering user-friendly test solution for validating electronic components and sub-assemblies and has a background in hardware, software, integration and production support.

WHAT YOU'LL DO

• Lead and own Hardware Qualification test plan definition for new products and new features, in collaboration with firmware, software, and hardware design teams
• Determine test strategies that optimize product safety, product reliability, risk mitigation, FMEA coverage, and schedule
• Design and execution of PCBA and electrical system components with hands on testing and rework as necessary
• Data analysis and clear communication of results and collaboration with design engineers to resolve any product problems found via test
• Design and implement next generation test automation hardware systems to facilitate fast and repeatable testing of product
• Manage purchasing, build, integration and final commissioning of functional testers
• Develop test procedures and test automation from component level to system level
• Support board bring-up and bench validation as needed
• Support Design Engineer with DFT, provide feedback from test results to improve quality and test coverage
• Support manufacture test bring-up and yield
• Support quality field failure analysis
• Familiarity with measurement analysis techniques such as Gage RR and Process Capability Analysis

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 3+ years of experience designing functional test equipment and PCBAs
• Experience in Schematic Capture and PCBA layout.
• Knowledge of a scripting language to develop automation: Python, C#, MATLAB or SHELL. Experience using NI TestStand is a plus
• Instrument control using VISA and SCPI
• Understanding of peripherals and developing test and validation strategies
• Experience with computer hardware communication bus protocols: USB, I2C, I2S, CSI, Ethernet, SPI, PCIe, HDMI, CAN, etc
• Understanding of memory hierarchy and developing test and validation strategy
• Understanding of Product Release Cycle from prototype to production and key deliverables of each phase
• Collaborate with a cross-functional team to support product development from prototype to production
• Experience with hands-on electrical engineering work

PREFERRED QUALIFICATIONS

• Understanding both hardware and software integration and test process
• Advance proficiency in MS Word, Excel, PowerPoint and VISIO
• Understanding of lab safety protocols when working in all types of lab environment
• A detail-oriented individual who strives in an environment that values effective team collaboration
• Self-motivated: Demonstrate ability to set direction and proactively identify and fills gaps where needed

ABOUT THE TEAM:

Anduril’s Tactical Recon & Strike (TRS) Division is seeking a Program Manager to join our team. Anduril’s Tactical Recon & Strike (TRS) is a division with two missions: 1) build highly capable autonomous drones, and 2) build solid rocket motors at scale. We transform products like Ghost, Anvil, Bolt, and Altius from early concepts into fully operational capabilities by partnering closely with specialist engineering, operations, and production teams. Through our Anduril Rocket Motor Systems (RMS) team, we design and manufacture solid rocket motors using advanced materials, proprietary formulations, and high-volume production methods—delivering safe, reliable propulsion systems that support a wide range of mission requirements. TRS hires software engineers & hardware engineers, who are excited to build across a diverse and powerful portfolio—from autonomous aerial systems to high-performance solid rocket motors. Our teams contribute to highly capable autonomous robotics systems and propulsion products that operate reliably in the most demanding mission environment. We work in close coordination with specialist teams to solve some of the hardest problems facing our customers.

Anduril is seeking a highly skilled, mission-driven, highly organized, detail-oriented, and responsive Program Manager to provide critical tactical support and operational oversight for our strategic defense clients, driving the adoption, expansion, and long-term success of Anduril's cutting-edge Launched Effects. You will serve as a trusted advisor, deeply understanding client operational requirements and translating them into impactful solutions that leverage our solutions. This role requires a unique blend of strategic thinking, technical aptitude, exceptional relationship-building skills, and a passionate commitment to national security. In addition, this role achieves results by focused on the day-to-day management of client accounts, ensuring the smooth deployment, ongoing functionality, and optimal performance of Anduril's Launched Effects solutions. You will be the primary point of contact for operational queries, issue resolution, logistics coordination, and direct support to ensure our military and government customers' success.

• Strategic Client Engagement:
• Serve as the lead point of contact for key defense accounts focused on Launched Effects solutions, establishing and nurturing strong, enduring relationships with military leadership, program offices, and operational end-users.
• Develop a deep understanding of client mission objectives, operational environments, and strategic priorities to proactively identify and position Anduril's Launched Effects products.
• Navigate complex government procurement processes, contracting mechanisms (e.g., DIU, SBIR, OTA), and funding cycles to ensure successful program execution and growth.
• Champion client needs internally, collaborating closely with Anduril's Engineering, Product, and Integration teams to inform product roadmap and ensure timely, high-quality solution delivery.
• Daily Client Operations & Support:
• Serve as the primary point of contact for assigned clients, managing day-to-day communications, operational requests, and urgent support needs related to Launched Effects product line.
• Address client inquiries promptly and effectively, providing direct solutions or coordinating with internal technical support, engineering, and logistics teams for rapid resolution of issues.
• Track and document all client interactions, support tickets, and operational feedback in the CRM system (e.g., Salesforce) with meticulous detail.
• Ensure clients receive timely updates on product enhancements, revisions, and relevant technical documentation.
• Solution Adoption & Growth:
• Drive the successful adoption and integration of Anduril's Launched Effects products into client operations, demonstrating clear mission value and operational superiority.
• Identify and cultivate opportunities for expansion within existing accounts, including upselling new features, capabilities, cross-selling adjacent Anduril technologies, and securing follow-on contracts.
• Develop comprehensive account plans, sales strategies, and proposals that align with client requirements and Anduril's strategic objectives.
• Conduct compelling technical demonstrations, presentations, and product briefings to diverse audiences, from technical specialists to general officers.
• Tactical Execution & Deliverables:
• Coordinate the scheduling and logistics for product demonstrations, training sessions, and field support visits with clients and internal teams.
• Monitor the operational status and usage data of deployed Launched Effects products, proactively identifying potential issues or areas for improvement in coordination with technical teams.
• Process and track client orders for system upgrades, spare parts, consumables, and additional training modules.
• Facilitate contract renewals by ensuring all terms and conditions of current agreements are met and documented.
• Prepare and deliver routine operational status reports, usage metrics, and support summaries to clients and internal stakeholders.
• Internal Coordination & Problem Solving:
• Act as the liaison between client operational teams and Anduril's internal engineering, product, and field support teams to ensure client requirements are accurately relayed and understood for immediate action.
• Troubleshoot basic technical issues on-site or remotely, escalating complex problems to the appropriate technical experts.
• Support the integration and qualification and testing of new Launched Effects system by coordinating client access and feedback.
• Assist in identifying and documenting client needs for future product features based on immediate operational feedback.
• Performance & Reporting:
• Forecast and track key account metrics, including revenue targets, program milestones, and operational deployment success.
• Provide regular, insightful reports to internal leadership on account status, strategic opportunities, competitive landscape, and challenges.
• Manage contract negotiations, ensuring favorable terms that support long-term partnerships and Anduril's business goals.
• Domain Expertise & Market Intelligence:
• Maintain an expert-level understanding of Anduril's Launched Effects product portfolio, including technical specifications, operational advantages, and future development pathways.
• Stay abreast of industry trends in rocket motor systems, applications and defense technologies, as well as evolving national security threats and doctrine.
• Gather and synthesize client feedback and market intelligence to contribute to Anduril's product development and competitive strategy.
• Compliance & Documentation:
• Ensure all client activities comply with contractual agreements, security protocols, and relevant government regulations.
• Maintain accurate and up-to-date client records, contact information, and equipment inventory.

REQUIRED QUALIFICATIONS:

• Education & Experience:
• Bachelor's degree in a technical field (e.g., Engineering, Computer Science), Business Administration, or a related discipline.
• 5+ years of progressive experience in program/project management, sales, or business development within the defense, aerospace, or government contracting sector.
• Demonstrated experience with unmanned aerial systems (UAS), autonomous platforms, AI/ML applications, or Launched Effects technologies is highly desirable.
• Active Secret or Top Secret security clearance, or the ability to obtain and maintain one, is required.
• Demonstrated ability to manage multiple tasks, prioritize effectively, and maintain exceptional attention to detail in a fast-paced environment.
• Proven track record of successfully managing complex client relationships and closing significant contracts with U.S. government entities (DoD, IC, etc.).
• Prior military experience, especially in an operational or procurement role related to advanced systems, is a significant advantage.
• Skills & Competencies:
• Exceptional verbal and written communication skills, presentation, and interpersonal skills, with the ability to articulate complex technical concepts to both technical and non-technical audiences.
• Strong strategic thinking and problem-solving abilities, with a capacity to connect client needs to innovative technical solutions.
• Proficiency in using CRM software (e.g., Salesforce) for documentation, tracking, and reporting. Includes program management tools.
• Ability to coordinate logistics, schedules, and resources efficiently.
• Highly responsive, proactive, and client-focused with a strong sense of urgency.
• Demonstrated ability to negotiate effectively, manage multiple priorities, and thrive in a fast-paced, high-stakes environment.
• Relentless commitment to supporting national security missions and delivering operational excellence.
• A deep sense of mission and commitment to strengthening national security through technological innovation.
• Ability to travel frequently (up to 50% or more) to client sites, operational environments, and Anduril facilities as required.

ABOUT THE TEAM

Anduril’s Tactical Reconnaissance & Strike (TRS) Finance group is seeking a Finance Analyst to join our team and support across multiple business lines. This role will support core FP&A responsibilities (close insights, forecasting, budgeting, and executive reporting) while leading a variety of special projects and/or ad-hoc analyses in support of the finance department and company initiatives. This role partners closely with Engineering, Product, Program Management, Growth, and Contracts to improve execution, investment decisions, and overall business performance.

ABOUT THE JOB

As a Financial Analyst, you will be responsible for EAC budgeting and maintenance, income statement and balance sheet forecasting, and internal reporting requirements under the Anduril Tactial Recon & Strike business lines. In this role you will support multiple contracts in parallel and interact closely with program management, functional stakeholders, and business line leadership to ensure Anduril is delivering on its financial commitments. You should be comfortable supporting and explaining financial contract performance and variance analysis to cross functional teams and executives. This is a critical role in a fast-growing company that is looking for problem solvers and innovators.

WHAT YOU’LL DO

• Work with program management to develop and maintain ETC forecasts and EAC integrity
• Contract profit margin analysis and surveillance
• Income statement and balance sheet forecasting by contract and business line
• Weekly, monthly, and ad hoc financial reporting to program management and business line leadership
• Review the month-end close output for the Intelligence business lines, ensuring monthly revenue is appropriate and reflects actual performance on the contracts
• Support quarterly business reviews, long range planning, and other management data calls
• Look around the corner to mitigate future potential issues and implement best practices and process improvements
• Participate in special projects or ad-hoc analysis in support of finance department and company initiatives

REQUIRED QUALIFICATIONS

• Bachelor’s Degree or above in Finance or related field
• 2+ years experience as a financial analyst
• Ability to operate independently in a fast paced environment
• Strong time management skills with ability to manage multiple tasks simultaneously and meet deadlines under pressure
• Able to understand and communicate financial performance and variance analysis to stakeholders
• Customer service mindset
• Proficiency in Microsoft Excel
• Must be a U.S. Person due to required access to U.S. export controlled information or facilities

PREFERRED QUALIFICATIONS

• Defence and/or Tech industry experience

Anduril’s Production organization is seeking a Director of Quality to join our team. The Quality team works with our customers, internal teams, and suppliers to ensure the deployment of reliable products that meet all mission requirements. We develop cutting-edge Quality processes and methods to secure scalable, long-term business success.

As the leader of the Quality team, you will work inside and outside the organization to develop strategies, define and execute plans, and implement processes that deliver reliable products. The right person for this role has knowledge of manufacturing, product development, and continuous improvement. If you are someone who loves to build world-class Quality processes, develop teams, and be accountable for results, then this role is for you.

What You’ll Do

• Own all aspects of Quality for the Atlanta division to support production of 1000’s of high-quality products per year
• Lead and own supplier and manufacturing quality to improve yields and reliability across the product lifecycle
• Lead and own the Quality Management System with a sustainable path to maintain AS9100 certification
• Leading the Root Cause Corrective Action (RCCA) program
• Own and improve key performance indicators (KPIs) for Quality across the manufacturing organization (Cost of Poor Quality, Escapes, Supplier Defects, and others)
• Carry out containment, RCCA, and disposition actions of any quality “escapes” or defective material
• Establish and implement a Zero Defects program
• Partner with other functional teams such as Manufacturing, Engineering, Program Management, Supply Chain, and Deployment Operations to execute success

Required Qualifications

• Bachelor’s degree in Engineering or similar technical field
• 10+ years of relevant experience working with OEM suppliers and manufacturing operations building complex hardware and software systems
• 5+ years experience working in a AS9100 regulated environment
• Experience in engineering, manufacturing, or quality within the aerospace/defense, automotive, or medical device fields
• Proven record in strategy and execution of Quality Management Systems in a certified AS9100 enterprise
• Working knowledge of product development methodologies such as Failure Modes and Effects Analysis (FMEA), Change Management, and Advanced Product Quality Planning (APQP)
• A strong ownership mindset with demonstrated capability to drive projects from start to finish
• Proven ability to track, prioritize and drive to success multiple concurrent projects with a strong operational background
• Hands-on leader. You're resourceful, forward-thinking, drawn to building from ambiguous and unsolved problems and have an "own the outcome" mindset.
• Influence and partnering with a diverse group of stakeholders, able to partner with deeply technical as well as operational, business-minded leaders on key Quality and Manufacturing topics
• U.S. Person status is required as this position needs to access export-controlled data

Preferred Qualifications

• Master’s degree in a technical field
• Experience as an auditor for AS9100 or other ISO 9001-based QMS standard (e.g., ISO 13485, IATF 16949).
• Experience with low volume manufacturing

ABOUT THE TEAM

The Tactical Reconnaissance and Strike division at Anduril develops a diverse set of robotic systems. The team is responsible for taking products like Ghost, Anvil, Altius, and Bolt from paper sketches to operational systems. We work in close coordination with specialist teams like Perception, Autonomy, and Manufacturing to solve some of the hardest problems facing our customers. We are looking for software engineers, roboticists, and full-stack and mobile developers who are excited about creating a powerful robotics platform that can be tasked and viewed in real-time through a variety of interfaces.
Must be eligible to obtain and maintain an active U.S. Secret security clearance. This position will be located at our office in Atlanta, GA (relocation benefits provided.)

ABOUT THE JOB

We are looking for Android Engineers to join our team. As an Android Engineer at Anduril you will be architecting and building out user interface applications from backend to frontend, deploying them to users, and making sure they're meeting users' requirements. You will be working alongside a team of engineers with diverse backgrounds as well as engaging with internal and external stakeholders. Your decisions will have a large impact on the company today and into the future. We believe that simple systems are easier to understand, maintain, and scale. You will be making trade-offs as you work to ensure that our systems are prepared to scale — being able to effectively communicate these trade-offs with your teammates is key.

What You’ll Do

• Design, build, test, and deploy real-time, map-based user interfaces for displaying and interacting with sensor data and controlling the Ghost, Altius, and Bolt aircraft from an Android application through the Android Tactical Assault Kit’s (ATAK) plugin ecosystem to enable tactical control for end users.
• Define and implement APIs for network communications, real-time telemetry, vehicle configuration, sensor/payload control with full motion video streaming, manual controls, and autonomous tasking.
• Help define foundational software architectures, visual designs, and user experience/interaction workflows for multiple UAS, working directly with chief engineers, product designers, program managers, flight test engineers, and end-user customers to demonstrate capability and iterate on feedback.
• Work directly with Android frontend technologies like Jetpack Compose, high-performance backend technologies like Java/Kotlin/C++/Rust/Golang, and software product lifecycle technologies likes CMake/Cargo/gradle/NixOS/CircleCI/Docker.
• Work directly with the Android Tactical Assault Kit (ATAK) SDK and the TAK Product Centers’ developer community (see tak.gov for more information).
• Work alongside engineers using multiple other full stack technologies like TypeScript/React, C++/Qt, and C#/.NET.
• Test and evaluate your software at multiple levels of rigor using simulations, benchtop hardware, and live flight assets.

Required Qualifications

• Degree in Computer Science, Computer Engineering, Aerospace Engineering, or another related technical degree.
• Experience developing software for user interface applications, especially high-traffic, data-intensive, or map-based systems
• Proficiency with modern Android programming languages including Jetpack Compose, XML, Java, and Kotlin.
• Proficiency with modern backend/middleware programming languages such as C++, Rust, or Golang.
• Familiarity with client/server networking technologies and relationships such as TCP/UDP/Multicast, HTTP (REST), or protobuf/gRPC.
• Proven ability to empathize with users, to break down user needs into software features, and to balance the ideal user experience with practical engineering constraints.
• Willingness to provide on call support to various clients
• Ability to travel up to 30% of the time, potentially including some international travel
• Eligible to obtain and maintain an active U.S. Secret security clearance

Preferred Qualifications

• Experience working with the DoD where safety is paramount, regulations must be balanced, and operational environments are tightly controlled.
• Experience with robotic systems where hardware, physical actuators, datalink networks, sensors and effectors are employed to translate software concepts to physical interactions with the world.
• Experience in a startup or small company working environment where deadlines are tight, requirements are open-ended, and the teams are often fewer than 10 people.
• Experience with 3D geospatial analysis and mapping software such as ArcGIS, Cesium, MapBox, or TAK.
• Experience developing user interface software that does not require Internet access or has local/offline functionality.
• Exposure to build system and software lifecycle technologies such as CMake, Cargo, gradle, NixOS, CircleCI, Gitlab-CI, Docker, Python, Bash, and other developer operations tools.
• Exposure to technologies related to Ghost, Altius, or Bolt such as flight mechanics, UAV control, mesh networking, full motion video processing, and intelligence/surveillance/reconnaissance sensors.
• Exposure to aviation such as a hobbyist RC piloting, holding a Private Pilot License or Part 107 Remote Pilot License, or similar.

ABOUT THE TEAM

Anduril’s Tactical Recon & Strike (TRS) is a division with two missions: 1) build highly capable autonomous drones, and 2) build solid rocket motors at scale. We transform products like Ghost, Anvil, Bolt, and Altius from early concepts into fully operational capabilities by partnering closely with specialist engineering, operations, and production teams. Through our Anduril Rocket Motor Systems (RMS) team, we design and manufacture solid rocket motors using advanced materials, proprietary formulations, and high-volume production methods—delivering safe, reliable propulsion systems that support a wide range of mission requirements. TRS hires software engineers & hardware engineers, who are excited to build across a diverse and powerful portfolio—from autonomous aerial systems to high-performance solid rocket motors. Our teams contribute to highly capable autonomous robotics systems and propulsion products that operate reliably in the most demanding mission environment.

ABOUT THE JOB

We are looking to bring on a Senior Test Automation Engineer, Hardware to design and deliver test systems for Anduril’s electronic products. This person will work to identify gaps in test coverage and own the design and delivery of the hardware and software test solution. A strong Test Design Engineer will need to have a proven track record of delivering turn-key test solutions for electronic components and systems and a background in hardware, software, integration and sustainment.

WHAT YOU'LL DO

• Manage a small team of Test Automation Engineers to deliver End to End test solutions for customers
• Define, own, and execute End of Line test plans for a set of new products and features, in collaboration with firmware, software, and hardware design teams
• Define and implement test strategies that optimize product safety, product reliability, risk mitigation, FMEA coverage, and schedule
• Design and execution of PCBA and electrical system components with hands on testing and rework as necessary
• Data analysis and clear communication of results and collaboration with design engineers to resolve any product problems found via test
• Design and implement next generation test automation hardware systems to facilitate fast and repeatable testing of product
• Execution and management of purchasing, build, integration and final commissioning of functional testers
• Develop test procedures and test automation from component level to system level
• Support board bring-up and bench validation as needed
• Support Design Engineer with DFT, provide feedback from test results to improve quality and test coverage
• Support manufacture test bring-up and yield
• Support in Root Cause Analysis process
• Lead and participate as a key contributor in design reviews
• Provide technical mentorship to engineering teams

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 8+ years of hands on electrical engineering experience designing functional test equipment
• 5+ years of experience in Schematic Capture and/or PCBA layout (experience with Altium Designer is a plus)
• 2+ years of experience in scripting language to develop automation (C/C++/C#, Python, or MATLAB – experience in LabVIEW is a plus)
• Experience with peripherals and developing test and validation strategies
• Advanced experience with computer hardware communication bus protocols: USB, I2C, I2S, CSI, Ethernet, SPI, PCIe, HDMI, CAN, serial comms, etc.
• Collaborate with a cross-functional team to support product development from prototype to production
• Understanding of lab safety protocols when working in all types of lab environment
• Familiarity with measurement analysis techniques such as Gage RR and Process Capability Analysis
• Understanding both hardware and software integration and test process
• Experience with source code revision and control (experience with GitHub is a plus)
• Must be eligible for a Security Clearance

PREFERRED QUALIFICATIONS

• Master’s Degree in Electrical Engineering or equivalent
• Proficiency in MS Word, Excel, PowerPoint and VISIO
• A detail-oriented individual who strives in an environment that values effective team collaboration
• Hands-on experience with NI TestStand software
• Experience in Product Release Cycle from prototype to production and key deliverables of each phase
• Experience RF test equipment such as Vector Network Analyzers, Spectrum Analyzers, Signal Generators, and Power Meters
• Experience with testing RF components like power amplifiers, transmitters, receivers, and filters
• Experience with wired networking technologies (Gigabit, 10Gigabit)
• Hands-on experience with complex networking equipment, a deep understanding of networking protocols, test design and implementation chops and a background in IP network design

ABOUT THE TEAM

Anduril’s Tactical Recon & Strike (TRS) is a division with two missions: 1) build highly capable autonomous drones, and 2) build solid rocket motors at scale. We transform products like Ghost, Anvil, Bolt, and Altius from early concepts into fully operational capabilities by partnering closely with specialist engineering, operations, and production teams. Through our Anduril Rocket Motor Systems (RMS) team, we design and manufacture solid rocket motors using advanced materials, proprietary formulations, and high-volume production methods—delivering safe, reliable propulsion systems that support a wide range of mission requirements. TRS hires software engineers & hardware engineers, who are excited to build across a diverse and powerful portfolio—from autonomous aerial systems to high-performance solid rocket motors. Our teams contribute to highly capable autonomous robotics systems and propulsion products that operate reliably in the most demanding mission environment.

THE ROLE

This position is on the TRS Core Infrastructure team and will be focused on building the infrastructure to field TRS Products such as Altius, Ghost, Bolt and Anvil. Our charter is to provide the foundation for teams across Anduril to deploy cutting edge TRS autonomy and to tie it all together into an easy-to-use product. The solutions that you will create address the current needs of our customers and will have immediate impact towards the success of our products.

WHAT YOU'LL DO

• Design, build, test, and release the testing infrastructure used during development & validation of Anduril Products including Software in the Loop (SITL) and Hardware in the Loop (HITL).
• Collaborate with cross-functional teams to integrate automated testing best practices into the software development lifecycle.
• Build tools in Python to facilitate development, testing, and release.
• Develop and maintain continuous integration/continuous delivery (CI/CD) pipelines.
• Interface with engineers developing every aspect of the system from low-level Linux drivers to cutting edge autonomy and streamlined user interfaces.
• Ensure that the testing infrastructure is robust and ready to facilitate the rapid development needed to keep pace with emerging product needs.

REQUIRED QUALIFICATIONS

• At least 3+ years working with a variety of programming languages such as Python, Rust, C++, Go, etc.
• Want to work on building the tools that engineers and technicians will use to ensure that Anduril products are ready to be deployed.
• Experience with modern build and deployment tooling (e.g. CircleCI, Docker, NixOS, Terraform).
• Are passionate about developer experience and always strive to provide the most streamlined testing pipeline.
• Have an intuition for finding solutions to complex problems that involve multiple first and third party technologies (related to simulation, data management, compute infrastructure, networking, and more).
• Enjoy collaborating with team members and partners in the autonomy domain, and building technologies and processes which enable engineers to rapidly develop and test autonomous systems at scale.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

PREFERRED QUALIFICATIONS

• You've built or invented something: an app, a website, game, startup.
• Previous experience working in an engineering setting: a startup (or startup-like environment), engineering school, etc.
• Professional software development lifecycle experience using tools such as version control, CI/CD systems, etc.
• A deep, demonstrated understanding of how computers and networks work, from a single desktop to a multi-cluster cloud node (UDP, TCP, gRPC, REST, etc.).
• Have built user interfaces using popular frontend frameworks (React, PySide, etc.).
• Experience creating automated Software in the Loop (SITL) and Hardware in the Loop (HITL) tests for robotics or embedded products.
• Experience building scalable backend software systems with various data storage and processing requirements.
• Experience with industry standard cloud platforms (AWS, Azure), CI/CD tools, and software infrastructure fundamentals (networking, security, distributed systems).
• Ability to quickly understand and navigate complex systems and established code bases.
• Experience designing complex software systems, and iterating upon designs via a technical design review process.
• Familiarity with industry standard monitoring, logging, and data management tools and best practices.
• A bias towards rapid delivery and iteration.

WHAT YOU’LL DO

• Design, build, and commission automated manufacturing systems to improve production throughput, product quality, and operator safety
• Work with product-specific design & manufacturing teams to scope the appropriate level of automation
• Own the design and integration of automation cells including Robot / Cobot applications, conveyance, bespoke electromechanical systems, and automated inspection  
• Work with IE and Facilities teams to lay out production lines in new and existing Anduril factories
• Generate 2D and 3D CAD files for automation lines and their systems / components
• Enforce and contribute to Anduril’s internal processes & standards, including requirements definition, vendor solicitation, commissioning sequences, and safety buyoffs
• Partner with cross-functional teams to troubleshoot equipment issues, reduce downtime, and drive continuous improvement initiatives

REQUIRED QUALIFICATIONS 

• Bachelor's degree in Robotics, Computer Science, Mechanical Engineering,
  Electrical Engineering, or similar
• 6+ years of experience designing and commissioning automated production equipment
• Proficient CAD modeling in NX, Solidworks or AutoCAD
• Proficient in robot / cobot selection and integration, including path planning, EOAT design, dresspacks, and safety
• Experience with at least one major conveyance system (fixed/palletized, AGV/AMR, slat, overhead carrier, etc)
• Experience integrating various control components including PLCs, HMIs, pushbuttons, stack lights, safety scanners, etc
• Must be a U.S. Person due to required access to U.S. export controlled information or facilities

PREFERRED QUALIFICATIONS 

• 9+ years of experience designing and commissioning automated production equipment
• Strong 3D CAD in NX
• Experience with automated dispense systems (adhesives, TIMs, paint, coatings, etc)
• Experience with multiple conveyance systems (fixed/palletized, AGV/AMR, slat, overhead carrier, etc)
• Experience with control panel layout, electrical component selection, and cable routing
• Experience integrating with MES and QMS

ABOUT THE TEAM:

Anduril’s Tactical Recon & Strike (TRS) Division is seeking a Program Manager to join our team. Anduril’s Tactical Recon & Strike (TRS) is a division with two missions: 1) build highly capable autonomous drones, and 2) build solid rocket motors at scale. We transform products like Ghost, Anvil, Bolt, and Altius from early concepts into fully operational capabilities by partnering closely with specialist engineering, operations, and production teams. Through our Anduril Rocket Motor Systems (RMS) team, we design and manufacture solid rocket motors using advanced materials, proprietary formulations, and high-volume production methods—delivering safe, reliable propulsion systems that support a wide range of mission requirements. TRS hires software engineers & hardware engineers, who are excited to build across a diverse and powerful portfolio—from autonomous aerial systems to high-performance solid rocket motors. Our teams contribute to highly capable autonomous robotics systems and propulsion products that operate reliably in the most demanding mission environment. We work in close coordination with specialist teams to solve some of the hardest problems facing our customers.

Anduril is seeking a highly skilled, mission-driven, highly organized, detail-oriented, and responsive Program Manager to provide critical tactical support and operational oversight for our strategic defense clients, driving the adoption, expansion, and long-term success of Anduril's cutting-edge Launched Effects. You will serve as a trusted advisor, deeply understanding client operational requirements and translating them into impactful solutions that leverage our solutions. This role requires a unique blend of strategic thinking, technical aptitude, exceptional relationship-building skills, and a passionate commitment to national security. In addition, this role achieves results by focused on the day-to-day management of client accounts, ensuring the smooth deployment, ongoing functionality, and optimal performance of Anduril's Launched Effects solutions. You will be the primary point of contact for operational queries, issue resolution, logistics coordination, and direct support to ensure our military and government customers' success.

• Strategic Client Engagement:
• Serve as the lead point of contact for key defense accounts focused on Launched Effects solutions, establishing and nurturing strong, enduring relationships with military leadership, program offices, and operational end-users.
• Develop a deep understanding of client mission objectives, operational environments, and strategic priorities to proactively identify and position Anduril's Launched Effects products.
• Navigate complex government procurement processes, contracting mechanisms (e.g., DIU, SBIR, OTA), and funding cycles to ensure successful program execution and growth.
• Champion client needs internally, collaborating closely with Anduril's Engineering, Product, and Integration teams to inform product roadmap and ensure timely, high-quality solution delivery.
• Daily Client Operations & Support:
• Serve as the primary point of contact for assigned clients, managing day-to-day communications, operational requests, and urgent support needs related to Launched Effects product line.
• Address client inquiries promptly and effectively, providing direct solutions or coordinating with internal technical support, engineering, and logistics teams for rapid resolution of issues.
• Track and document all client interactions, support tickets, and operational feedback in the CRM system (e.g., Salesforce) with meticulous detail.
• Ensure clients receive timely updates on product enhancements, revisions, and relevant technical documentation.
• Solution Adoption & Growth:
• Drive the successful adoption and integration of Anduril's Launched Effects products into client operations, demonstrating clear mission value and operational superiority.
• Identify and cultivate opportunities for expansion within existing accounts, including upselling new features, capabilities, cross-selling adjacent Anduril technologies, and securing follow-on contracts.
• Develop comprehensive account plans, sales strategies, and proposals that align with client requirements and Anduril's strategic objectives.
• Conduct compelling technical demonstrations, presentations, and product briefings to diverse audiences, from technical specialists to general officers.
• Tactical Execution & Deliverables:
• Coordinate the scheduling and logistics for product demonstrations, training sessions, and field support visits with clients and internal teams.
• Monitor the operational status and usage data of deployed Launched Effects products, proactively identifying potential issues or areas for improvement in coordination with technical teams.
• Process and track client orders for system upgrades, spare parts, consumables, and additional training modules.
• Facilitate contract renewals by ensuring all terms and conditions of current agreements are met and documented.
• Prepare and deliver routine operational status reports, usage metrics, and support summaries to clients and internal stakeholders.
• Internal Coordination & Problem Solving:
• Act as the liaison between client operational teams and Anduril's internal engineering, product, and field support teams to ensure client requirements are accurately relayed and understood for immediate action.
• Troubleshoot basic technical issues on-site or remotely, escalating complex problems to the appropriate technical experts.
• Support the integration and qualification and testing of new Launched Effects system by coordinating client access and feedback.
• Assist in identifying and documenting client needs for future product features based on immediate operational feedback.
• Performance & Reporting:
• Forecast and track key account metrics, including revenue targets, program milestones, and operational deployment success.
• Provide regular, insightful reports to internal leadership on account status, strategic opportunities, competitive landscape, and challenges.
• Manage contract negotiations, ensuring favorable terms that support long-term partnerships and Anduril's business goals.
• Domain Expertise & Market Intelligence:
• Maintain an expert-level understanding of Anduril's Launched Effects product portfolio, including technical specifications, operational advantages, and future development pathways.
• Stay abreast of industry trends in rocket motor systems, applications and defense technologies, as well as evolving national security threats and doctrine.
• Gather and synthesize client feedback and market intelligence to contribute to Anduril's product development and competitive strategy.
• Compliance & Documentation:
• Ensure all client activities comply with contractual agreements, security protocols, and relevant government regulations.
• Maintain accurate and up-to-date client records, contact information, and equipment inventory.

REQUIRED QUALIFICATIONS:

• Education & Experience:
• Bachelor's degree in a technical field (e.g., Engineering, Computer Science), Business Administration, or a related discipline.
• 5+ years of progressive experience in program/project management, sales, or business development within the defense, aerospace, or government contracting sector.
• Demonstrated experience with unmanned aerial systems (UAS), autonomous platforms, AI/ML applications, or Launched Effects technologies is highly desirable.
• Active Secret or Top Secret security clearance, or the ability to obtain and maintain one, is required.
• Demonstrated ability to manage multiple tasks, prioritize effectively, and maintain exceptional attention to detail in a fast-paced environment.
• Proven track record of successfully managing complex client relationships and closing significant contracts with U.S. government entities (DoD, IC, etc.).
• Prior military experience, especially in an operational or procurement role related to advanced systems, is a significant advantage.
• Skills & Competencies:
• Exceptional verbal and written communication skills, presentation, and interpersonal skills, with the ability to articulate complex technical concepts to both technical and non-technical audiences.
• Strong strategic thinking and problem-solving abilities, with a capacity to connect client needs to innovative technical solutions.
• Proficiency in using CRM software (e.g., Salesforce) for documentation, tracking, and reporting. Includes program management tools.
• Ability to coordinate logistics, schedules, and resources efficiently.
• Highly responsive, proactive, and client-focused with a strong sense of urgency.
• Demonstrated ability to negotiate effectively, manage multiple priorities, and thrive in a fast-paced, high-stakes environment.
• Relentless commitment to supporting national security missions and delivering operational excellence.
• A deep sense of mission and commitment to strengthening national security through technological innovation.
• Ability to travel frequently (up to 50% or more) to client sites, operational environments, and Anduril facilities as required.

ABOUT THE TEAM

We are seeking an experienced System Safety Engineer to join our rapidly growing team in Atlanta, GA in support of our Altius product line. Altius is a versatile platform designed to provide on-demand capability that can be launched from ground, air, or sea to conduct a variety of mission types. We work closely with our broader Engineering team to ensure these cutting-edge systems are safe and effective for development, testing, and deployment in complex operational environments.

As a System Safety Engineer at Anduril, you will leverage your extensive knowledge of advanced Reliability & System Safety tools and methodologies to drive excellence in our safety processes. You will support the Reliability Engineering, Systems Engineering, and Hardware & Software development teams across the product development lifecycle by guiding Functional Hazard Analysis, Fault Trees, System Safety Assessments, and Hazard Management and Hazard Mitigation activities for your product(s). The right person for this role has knowledge of design and development with a safety focus on sUAS, as well as exposure to test, analysis, manufacturing, and continuous improvement in a production environment. If you are someone who has hands-on experience throughout the new product development life cycle from concept to customer delivery, loves to build world-class Reliability and Safety processes, can work efficiently across multi disciplinary teams, and be accountable for results, then this role is for you.

WHAT YOU'LL DO

REQUIRED QUALIFICATIONS

PREFERRED QUALIFICATIONS

ABOUT THE TEAM

Anduril’s Tactical Reconnaissance & Strike (TRS) Finance group is seeking a Finance Manager to join our team and support the Small Drones business line. This role will own core FP&A responsibilities (close insights, forecasting, budgeting, and executive reporting) while partnering closely with Engineering, Product, Program Management, Growth, and Contracts to improve execution, investment decisions, and overall business performance.

We are not looking for someone that will just be a service provider but someone that will have a seat at the table and drive strategic & operational growth within Small Drones—helping build a scalable financial operating system for a rapidly evolving Small Drones analytics portfolio.

ABOUT THE JOB

In practice, this role will support important decisions with analytical insight and strategic and tactical recommendations to drive the long-term success of the Small Drones business line. You will lead business line forecasting, budgeting, and performance management, and communicate your findings to senior leadership. You will partner cross-functionally to operationalize hypotheses, take action, and continuously improve financial and operational rigor.

This role requires a strong interest in solving puzzles with an ability to recognize patterns and collaborate via cross-functional partnership to drive effective decision-making. Success in this position comes from a dynamic mindset, strong analytical skills, attention to detail, and an operating posture that balances speed with rigor—especially in environments with evolving requirements and high mission impact. The ideal candidate can work autonomously with minimal direction, can own ambiguous workstreams end-to-end, and consistently drives work to completion.

WHAT YOU’LL DO

• Business Line FP&A (Forecasting, Budgeting, Close Insights)
• Own the Small Drones financial operating rhythm: monthly close insights, forecasting, and variance drivers tied to engineering delivery and customer milestones
• Lead annual and quarterly planning cycles, including target setting, resource allocation, and performance tracking against business objectives
• Develop executive-ready reporting, dashboards, and narratives for AD&S leadership to drive decision-making
• Partner with cross-functional leaders to surface risks and opportunities early and drive corrective actions
• Unit Economics, Cost Structure, and Scaling Analysis
• Develop and maintain business-line models to quantify unit economics (Analytics + integration + support), margin drivers, and scaling assumptions
• Analyze cost drivers across labor, infrastructure, test, security/compliance, and field support to improve predictability and efficiency
• Support build/buy/partner decisions and quantify ROI for tooling, infrastructure, and capability investments
• Headcount Planning & Workforce Analytics
• Create comprehensive headcount and new hiring budgeting plans aligned to roadmap delivery and program commitments
• Lead the headcount forecasting and reporting process, ensuring alignment with financial, operational and technical goals
• Partner with People function, Talent Acquisition and department leaders to analyze staffing needs, hiring plans, and workforce costs
• Support functional leaders to develop workforce plans as part of the annual planning process
• Develop and maintain models to project salaries, benefits, and personnel-related expenses, ensuring accuracy in financial planning
• Track actuals vs. forecast for headcount, compensation, and benefits, providing insights on variances and trends
• IRAD & Internal Investment Management
• Partner closely with Small Drones engineering and product leaders to create comprehensive budgeting plans for IRAD programs and strategic initiatives
• Manage IRAD budget tracking, including burn, staffing mix, milestone outcomes, and post-gate spend visibility
• Support trade studies for where to invest IRAD vs. customer-funded development to accelerate product maturity and repeatability
• Program / Customer Execution Finance (Plus: Proposals and Pricing Support)
• Support program performance management by tracking actuals vs. forecast for key cost elements and deliverables; provide actionable insights to Program Management and Engineering leaders
• Develop metrics and a monitoring plan to ensure effective implementation of program financial plans while identifying ways to continually improve performance
• Support pricing strategy and proposal development for Small Drones pursuits as needed, including modeling scope assumptions and post-award baseline set-up
• Partner with Growth, Contracts, and Program teams to support deal constructs, assumptions, and change management to improve deliverability and financial outcomes
• Process Improvement and Tooling
• Establish and continuously improve reporting processes and tools to increase transparency, speed, and decision quality
• Drive process improvements across planning, forecasting, and performance management; standardize recurring deliverables where possible

REQUIRED QUALIFICATIONS

• Bachelor's degree in Finance, Accounting, Economics, or a related field; MBA or relevant professional certification (CPA, CFA) is a plus
• 5+ years of experience in financial analysis, modeling, and forecasting within a corporate FP&A, investment banking or consulting environment
• Experience supporting program finance, program execution cadence, or defense contracting environments is a plus
• Experience supporting proposals, pricing, or deal finance in a cross-functional environment is a plus
• Experience in analytics, aerospace, defense, or adjacent complex product environments is a plus
• Strong expertise in cash flow management and working capital optimization
• Advanced proficiency in Excel, financial modeling, and data analysis tools
• Demonstrated ability to lead process improvement initiatives in a finance function
• Excellent communication and presentation skills, with the ability to convey complex financial information in an understandable manner
• Proven track record of managing multiple projects in a deadline-driven environment
• Ability to work autonomously with minimal direction, take ownership of ambiguous workstreams, and drive deliverables to completion
• Experience with financial reporting tools and ERP systems (i.e. Anaplan, Oracle, Foundry)
• Must be authorized to work in the United States

ABOUT THE TEAM

Anduril’s Tactical Recon & Strike (TRS) is a division with two missions: 1) build highly capable autonomous drones, and 2) build solid rocket motors at scale. We transform products like Ghost, Anvil, Bolt, and Altius from early concepts into fully operational capabilities by partnering closely with specialist engineering, operations, and production teams. Through our Anduril Rocket Motor Systems (RMS) team, we design and manufacture solid rocket motors using advanced materials, proprietary formulations, and high-volume production methods—delivering safe, reliable propulsion systems that support a wide range of mission requirements. TRS hires software engineers & hardware engineers, who are excited to build across a diverse and powerful portfolio—from autonomous aerial systems to high-performance solid rocket motors. Our teams contribute to highly capable autonomous robotics systems and propulsion products that operate reliably in the most demanding mission environment.

The Electrical Test Engineering team at Anduril develops test systems used to ensure the quality and reliability of our aerial and ground based systems. The team works on air vehicles such as the ALTIUS and develop complex manufacturing test solutions to our internal manufacturing team or contract manufacturers. We work closely and cross-functionally with the rest of our Product Engineering groups that include Electrical, Mechanical and Firmware Engineering to solve and improve our manufacturing process, product quality and reliability.

ABOUT THE JOB

We are looking to bring on a Senior Electrical Test Engineer to design and deliver test systems for Anduril’s electronic products. This person will work with the test of the organization to identify gaps in test coverage and own the design and delivery of the hardware and software test solution. A strong Senior Electrical Test Engineer will need to have a proven track record of delivering turn key test solution for electronic components and systems and has a background in hardware, software, integration and sustainment.

WHAT YOU'LL DO

• Lead and own Hardware Qualification test plan definition for new products and new features, in collaboration with firmware, software, and hardware design teams
• Determine test strategies that optimize product safety, product reliability, risk mitigation, FMEA coverage, and schedule
• Design and execution of PCBA and electrical system components with hands on testing and rework as necessary
• Data analysis and clear communication of results and collaboration with design engineers to resolve any product problems found via test
• Design and implement next generation test automation hardware systems to facilitate fast and repeatable testing of product
• Manage purchasing, build, integration and final commissioning of functional testers
• Develop test procedures and test automation from component level to system level
• Support board bring-up and bench validation as needed
• Support Design Engineer with DFT, provide feedback from test results to improve quality and test coverage
• Support manufacture test bring-up and yield
• Support quality field failure analysis
• Familiarity with measurement analysis techniques such as Gage RR and Process Capability Analysis

REQUIRED QUALIFICATIONS

• Bachelor’s Degree or Master’s Degree in Electrical Engineer or equivalent
• 8+ years of experience designing functional test equipment and PCBAs
• Experience in Schematic Capture and PCBA layout.
• Knowledge of scripting language to develop automation. Python, Matlab, PERL or SHELL. Experience in LabVIEW is a plus
• Instrument control using VISA and SCPI
• Understanding of peripherals and developing test and validation strategies
• Experience with computer hardware communication bus protocols: USB, I2C, I2S, CSI, Ethernet, SPI, PCIe, HDMI, CAN, etc
• Understanding of memory hierarchy and developing test and validation strategy
• Understanding of Product Release Cycle from prototype to production and key deliverables of each phase
• Collaborate with a cross-functional team to support product development from prototype to production
• Experience with hands-on electrical engineering work

PREFERRED QUALIFICATIONS

• Understanding both hardware and software integration and test process
• Advance proficiency in MS Word, Excel, PowerPoint and VISIO
• Understanding of lab safety protocols when working in all types of lab environment
• A detail-oriented individual who strives in an environment that values effective team collaboration
• Self-motivated: Demonstrate ability to set direction and proactively identify and fills gaps where needed

As a key member of Anduril's software recruiting team, you will be responsible for the company's talent management as we continue to rapidly grow. Your work will be hands-on and involve collaborating with leaders and individual contributors to define the hiring needs of the company. To achieve this, you will be given the autonomy and tools to execute on our strategy to build and develop Anduril's world class team. We are looking for someone who can handle high levels of ownership while tackling every aspect of recruiting and is excited to be part of small team where no task is too big or too small. We are searching for a Senior Technical Recruiter who will be working directly with multiple small drone teams and recruiting for software engineers with robotics domain experience.

This role is open to 6 month contract only. Location: Costa Mesa, CA or Atlanta, GA.

WHAT YOU’LL DO

• Move fast, with a process for consistently sourcing, tracking and maintaining a high volume of candidates while maintaining open lines of communication with stakeholders
• Establish deep trust and partnership with business leaders to help influence talent strategy while executing on hiring deliverables
• Build trust through consisteny and a strong operating rhythm in partnership with cross-functional stakeholders to help scale and manage company growth
• Embed yourself into the business and into your teams to understand the product positioning and market fit, technical roadmap, and culture of the team
• Develop a strong understanding of the mission while learning how to effectively pitch the team and opportunity, ultimately closing exceptional technical talent for the organization
• Track and analyze pipeline and performance data to gain insights into areas of opportunity and translate that into a data-driven narrative that enables increased momentum
• Build recruiting strategies that contribute to the long-range growth of the company, implementing best practices around referrals and process improvements where needed
• Act as a subject matter expert in prospecting techniques and tools used for information retrieval, data extraction, web-scraping, continuous process improvement, process automation, and candidate management
• Conduct interviews of potential candidates, demonstrating ability to anticipate hiring manager preferences through high interview-to-offer ratios
• Engage passive candidates using Linkedin Recruiter, Gem, Boolean strings, referral and SOBO campaigns
• Provide a consistent and positive candidate experience throughout the entire recruiting process with proactive communication and engagement

REQUIRED QUALIFICATIONS

• 6+ years experience recruiting and sourcing for technical roles and closing top tier engineering talent (startup/software experience preferred)
• Experience hiring candidates within facets of robotics (computer vision, perception, motion planning, localization, mapping, etc.)
• 4+ years of client interaction experience, including working with Hiring Managers and Directors, taking new requirements, reviewing profiles and updating pipeline progress
• Experience acting in a consultative manner where your guidance has led to improved outcomes, and a positive candidate experience, while earning the respect of your peers and clients
• Strong understanding of the technical skills and experience required for Engineering positions within the business
• Clear and effective communication with candidates to understand motivation, drivers, and fit within the organization
• Experience managing various funnels of candidates and keeping track of their progress throughout the recruitment process
• Working knowledge of applicant tracking and HRIS systems
• Working knowledge of interview techniques and applicant screening methods
• Familiar with a wide variety of sourcing avenues

PREFERRED QUALIFICATIONS

• Experience in Startup, Tech, and relevant domain experience (AAV, UAS, AUV, Weapons or related programs)
• Are self-sufficient and are able to work with little direct supervision
• Resilient and creative – ideal candidates will be flexible enough to face routine obstacles, trouble shoot, and create a solution on the fly
• Attention and Communication – ideal candidates will be direct and succinct. They will share information in a timely and efficient manner, improving collaboration and productivity, while practicing active listening and engagement with intent
• Ownership – Be accountable for your universe and in tune with the business. Everyone on this team takes full responsibility for helping Anduril achieve its mission. That means seeking to improve all aspects of our company even in ways that are not explicitly part of our job while leveling up anything you can directly impact in realtime
• Low ego, high curiosity – Value learning over being right. Embraces delivering and receiving candid feedback, and see every setback as an opportunity to iterate and improve

ABOUT THE TEAM

Anduril’s Tactical Recon & Strike (TRS) is a division with two missions: 1) build highly capable autonomous drones, and 2) build solid rocket motors at scale. We transform products like Ghost, Anvil, Bolt, and Altius from early concepts into fully operational capabilities by partnering closely with specialist engineering, operations, and production teams. Through our Anduril Rocket Motor Systems (RMS) team, we design and manufacture solid rocket motors using advanced materials, proprietary formulations, and high-volume production methods—delivering safe, reliable propulsion systems that support a wide range of mission requirements. TRS hires software engineers & hardware engineers, who are excited to build across a diverse and powerful portfolio—from autonomous aerial systems to high-performance solid rocket motors. Our teams contribute to highly capable autonomous robotics systems and propulsion products that operate reliably in the most demanding mission environment.

ABOUT THE JOB

Anduril is seeking a senior finance professional to lead the Tactical Reconnaissance and Strike (TRS) finance team. This role will provide leadership and management of division and business line finance teams as TRS continues to rapidly scale. This person will oversee financial planning and analysis, program finance, strategic finance and pricing and is expected to recommend and execute on new strategies that drive both top- and bottom-line impact.

The TRS finance and business teams will rely on this leader to develop, grow, and sustain strong collaborate relationships with internal and external Anduril stakeholders. In practice, the Head of Finance will support TRS’s rapid growth and make important decisions that drive the long-term success of our business. You will communicate your findings to senior leadership and partner with others to operationalize the hypotheses and takeaways. This role requires a strong interest in solving puzzles with an ability to recognize patterns and collaborate via cross-functional partnerships drive decision-making. You will be tasked with identifying business opportunities, formulating hypotheses, and conducting in-depth analyses which illuminate opportunities to drive success.

WHAT YOU’LL DO

• Daily partnership with Senior Leaders within TRS to bring first class financial expertise and fractional CFO level support to the business.
• Manage the processes for financial forecasting and budgets, and oversee the preparation of division, business line, product and program level financial reporting.
• Evaluate financial performance by comparing and analyzing actual results with forecasts, highlighting trends and analyzing causes of unexpected variances.
• Work with senior TRS and corporate finance leaders to identify and implement ways to improve business performance and finance systems, tools and processes.
• Lead the development of executive-level reporting and present financial insights to senior management.
• Get deep in the operations and support the team in creating bottoms-up, data-driven models to understand segmentation, pricing optimization, scenarios, and financial returns of our products and investments.
• Manage and scale a dedicated finance team in line with the needs of the business by developing and hiring best-in-class talent and implementing best practices and tools to ensure a well-controlled yet flexible finance organization.
• Own performance dashboards, alerting, and investigation into KPI health. Assess the impact of financial decisions on KPIs while developing strategies which drive demonstrable impact against these metrics.
• Develop deep relationships with our customers (both internal and external) and oversee customer program reporting, monthly invoicing, and monthly financial status reporting.

REQUIRED QUALIFICATIONS

• Bachelor's degree in Finance, Accounting, Economics, or a related field; MBA or relevant professional certification (CPA, CFA) is a plus.
• 10-15 years of finance experience working for Big Tech, Defense, Large Manufacturing, or Government contracting, with 3-5 years in a senior leadership position.
• Advanced proficiency in Excel, financial modeling and data analysis tools, and experience with financial reporting tools and ERP systems (i.e. Oracle Fusion, Oracle EPM, Anaplan, Foundry).
• Demonstrated track record of owning problems end-to-end in a finance function.
• Intellectually curious - you seek to understand the why behind the numbers.
• Highly technical - you value precision and accuracy when it comes to your work, and you can rapidly dissect complex quantitative problems.
• Critical thinker - you consider problems from all angles to remove bias.
• Results-oriented - you will do whatever it takes to get the job done.
• Exceptional written and oral communication skills. You drive consensus through grounded arguments, interpersonal skills, and negotiation skills.
• Creative problem-solver - able to identify obstacles and present viable solutions.
• Comfortable working in a fast-moving, ambiguous environment.
• Excited by large breadth of problems.
• Confidence to execute in highly visible and accountable positions.
• Must be authorized to work in the United States.
• Must be security clearance eligible.

ABOUT THE TEAM

Anduril’s Tactical Recon & Strike (TRS) is a division with two missions: 1) build highly capable autonomous drones, and 2) build solid rocket motors at scale. We transform products like Ghost, Anvil, Bolt, and Altius from early concepts into fully operational capabilities by partnering closely with specialist engineering, operations, and production teams. Through our Anduril Rocket Motor Systems (RMS) team, we design and manufacture solid rocket motors using advanced materials, proprietary formulations, and high-volume production methods—delivering safe, reliable propulsion systems that support a wide range of mission requirements. TRS hires software engineers & hardware engineers, who are excited to build across a diverse and powerful portfolio—from autonomous aerial systems to high-performance solid rocket motors. Our teams contribute to highly capable autonomous robotics systems and propulsion products that operate reliably in the most demanding mission environment.

The guidance, navigation, and control (GNC) team within TRS performs implementation, analysis, test, and validation for GNC software solutions supporting our autonomous drone fleet. Applications include attitude and position control, waypoint and terminal guidance engagements, and navigating contested environments including communication and GPS denied environments.

ABOUT THE JOB

This role will be responsible for guidance and control law development and validation, hardware and software in-the-loop test and analysis, and cutting edge navigation solutions supporting the entire range of drones within TRS.

This position will be on-site at our Atlanta GA location. (relocation benefits provided.)

WHAT YOU’LL DO

• Develop, debug, and test flight controllers and guidance algorithms
• Develop and test Software-In-The-Loop and Hardware-In-The-Loop tests in preparation for flight testing
• Work closely with the flight software team to define requirements, integrate GNC software and test functionality in simulation
• Review test data captured from the flight control system, subsystems, and other test instrumentation to verify vehicle performance, evaluate GNC algorithm/controller behavior, or debug incidents during testing or from fielded assets
• Develop models required to support functional evaluation of GNC software

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Robotics, Mechanical Engineering, Electrical Engineering, Aerospace Engineering, or a related field with a focus on dynamic systems and control
• 8 years professional experience in a GNC role, preferably on airborne platforms
• Experience with Matlab and Simulink
• Experience in modeling and simulation of linear and nonlinear dynamic systems and model linearization
• A passion for defending the Unites States of America and its allies
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Master’s Degree of PhD in Robotics, Mechanical Engineering, Electrical Engineering, Aerospace Engineering, or a related field with a focus on dynamic systems and control
• Experience with state estimation - Kalman filtering, sensor fusion, etc.
• Experience with integrating and debugging navigation systems for aerial platforms
• Experience with flight control design and analysis for fixed and rotary wing aircraft or missile systems
• Experience with guidance algorithm development
• C/C++ Proficiency
• Experience with Simulink Embedded Coder

ABOUT THE ROLE

Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century’s most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril’s family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years.

The Supply Chain Systems Analyst role will act as one of the core Business Systems and Optimization leads for Anduril’s Supply Chain team and will support the end-to-end Supply Chain Digital and Process ecosystem. As such, the role will collaborate with internal Supply Chain teams (Procurement, Purchasing, Planning, Program Management) and external teams (IT, Engineering, Business Systems, Strategy, Legal, People, etc.) to develop system implementation plans intended to enhance our digital landscape and increase efficiencies throughout our end-to-end processes, all with a focus on introducing scale and resiliency into our growing people and tools footprint.

WHAT YOU’LL DO

• Provide business systems (ERP/MES) support to manufacturing/material teams to ensure process adherence and data integrity when executing production plans
• Support and execute functional processes, user support, and data maps or Supply Chain within Procurement, Purchasing, Program Management, Material Management, etc.
• Align internal Supply Chain with other related verticals (i.e., Finance, Accounting, Engineering, Manufacturing, etc.) on company goals, forecasted scale, requirements, constraints, prioritization and corresponding timelines
• Collaborate with IT teams to execute agreed-upon enhancement roadmap to deliver critical business value, from project planning and requirement setting and resource planning, through implementation and sprint planning, to training and business rollout
• Act as one of the main SMEs/PoCs for System, Process and Data roadmap for Supply Chain Operations (i.e., Sourcing, Purchasing, Supplier Quality, Material Planning, Supplier Execution, Inventory/WHSE, etc.).Scope and deploy a Supply Chain Reporting/KPI suite, including both supply partner facing (i.e., Supplier Portal) and internal KPI dashboards to inform leaders of the health, scale, risks, and opportunities for Supply Chain
• Work with IT teams in defining requirements for home-grown applications and platforms. Lead the business end of development-to deployment. Ensure design with focus on critical business capabilities with and a high degree of usability, efficiency, automation and integration into the larger system and process landscape
• Work with Supply Chain leaders to create and optimize business processes to ensure efficiencies across the organization and support rapid scale/growth. Develop internal ad-hoc tools as needed to plug process gaps ahead of larger system fixes

QUALIFICATIONS

• B.S. in Engineering, Supply Chain or equivalent degree
• 3+ years of experience with supply chain IT systems, user support, and data analytics
• Must be a U.S. Person due to required access to U.S. export controlled information or facilities

PREFERRED QUALIFICATIONS:

• Experience in large-scale implementation and sustainment of ERP/WMS, Oracle highly preferred
• Experience working within a HW development company in an early-stage company environment
• Previous experience developing, documenting and executing supply chain focused digital ecosystems
• Strong understanding of developing and defining dashboards and KPI's for supply chain operations
• Strong communication and collaboration skills (throughout all levels of the organization and across multiple business/functional verticals)
• Must be a U.S. Person due to required access to U.S. export controlled information or facilities

As a key member of Anduril's software recruiting team, you will be responsible for the company's talent management as we continue to rapidly grow. Your work will be hands-on and involve collaborating with leaders and individual contributors to define the hiring needs of the company. To achieve this, you will be given the autonomy and tools to execute on our strategy to build and develop Anduril's world class team. We are looking for someone who can handle high levels of ownership while tackling every aspect of recruiting and is excited to be part of small team where no task is too big or too small. We are searching for a Senior Technical Recruiter who will be working directly with multiple small drone teams and recruiting for software engineers with robotics domain experience.

This role is open to 6 month contract only. Location: Costa Mesa, CA or Atlanta, GA.

WHAT YOU’LL DO

• Move fast, with a process for consistently sourcing, tracking and maintaining a high volume of candidates while maintaining open lines of communication with stakeholders
• Establish deep trust and partnership with business leaders to help influence talent strategy while executing on hiring deliverables
• Build trust through consisteny and a strong operating rhythm in partnership with cross-functional stakeholders to help scale and manage company growth
• Embed yourself into the business and into your teams to understand the product positioning and market fit, technical roadmap, and culture of the team
• Develop a strong understanding of the mission while learning how to effectively pitch the team and opportunity, ultimately closing exceptional technical talent for the organization
• Track and analyze pipeline and performance data to gain insights into areas of opportunity and translate that into a data-driven narrative that enables increased momentum
• Build recruiting strategies that contribute to the long-range growth of the company, implementing best practices around referrals and process improvements where needed
• Act as a subject matter expert in prospecting techniques and tools used for information retrieval, data extraction, web-scraping, continuous process improvement, process automation, and candidate management
• Conduct interviews of potential candidates, demonstrating ability to anticipate hiring manager preferences through high interview-to-offer ratios
• Engage passive candidates using Linkedin Recruiter, Gem, Boolean strings, referral and SOBO campaigns
• Provide a consistent and positive candidate experience throughout the entire recruiting process with proactive communication and engagement

REQUIRED QUALIFICATIONS

• 6+ years experience recruiting and sourcing for technical roles and closing top tier engineering talent (startup/software experience preferred)
• Experience hiring candidates within facets of robotics (computer vision, perception, motion planning, localization, mapping, etc.)
• 4+ years of client interaction experience, including working with Hiring Managers and Directors, taking new requirements, reviewing profiles and updating pipeline progress
• Experience acting in a consultative manner where your guidance has led to improved outcomes, and a positive candidate experience, while earning the respect of your peers and clients
• Strong understanding of the technical skills and experience required for Engineering positions within the business
• Clear and effective communication with candidates to understand motivation, drivers, and fit within the organization
• Experience managing various funnels of candidates and keeping track of their progress throughout the recruitment process
• Working knowledge of applicant tracking and HRIS systems
• Working knowledge of interview techniques and applicant screening methods
• Familiar with a wide variety of sourcing avenues

PREFERRED QUALIFICATIONS

• Experience in Startup, Tech, and relevant domain experience (AAV, UAS, AUV, Weapons or related programs)
• Are self-sufficient and are able to work with little direct supervision
• Resilient and creative – ideal candidates will be flexible enough to face routine obstacles, trouble shoot, and create a solution on the fly
• Attention and Communication – ideal candidates will be direct and succinct. They will share information in a timely and efficient manner, improving collaboration and productivity, while practicing active listening and engagement with intent
• Ownership – Be accountable for your universe and in tune with the business. Everyone on this team takes full responsibility for helping Anduril achieve its mission. That means seeking to improve all aspects of our company even in ways that are not explicitly part of our job while leveling up anything you can directly impact in realtime
• Low ego, high curiosity – Value learning over being right. Embraces delivering and receiving candid feedback, and see every setback as an opportunity to iterate and improve

ABOUT THE JOB

We are looking for Mechanical Engineers to join our rapidly growing team! We have positions open in Costa Mesa, CA. These roles are targeted to start on a quarterly basis beginning in 2026. We hire self-motivated people, those who hold a higher bar for themselves than anyone else could hold for them. If you are eager to solve tough problems, then this role might be for you!

WHAT YOU’LL DO

• Design & build prototypes, analyze failures, and transition successful projects into production.
• Present design reviews, run analysis, visit vendors, design & execute hardware test plans.
• Use first principles physics as a basis for every decision.
• Get exposure to missile integration and testing.
• Travel to test sites and vendors as needed.

REQUIRED QUALIFICATIONS

• Must be pursuing or have recently completed a Bachelor’s or Master’s degree in Mechanical Engineering, Computer Engineering, or a related field.
• 3 months - 2 years of technical work to include technical internship and able to start full time in 2026.
• Demonstrated hands-on fabrication or laboratory skills.
• CAD skills (any platform) and ability to make high quality engineering drawings that meet common industry standards.
• High competence with, and fluid use of, engineering first principles.
• Must be a U.S. Person due to required access to U.S. export controlled information or facilities; U.S. clearance eligibility may be required depending on program.

PREFERRED QUALIFICATIONS

• Ability to integrate electrical components into designs (motors, controllers, sensors etc.).
• Experience with machining, sheet metal, injection molding, and/or 3D printing.
• Have a bias for action. If you see a problem, you want to solve and fix it.
• Be naturally curious about the technologies and tools you use.
• Low-ego, high ownership, and mission oriented.

Anduril is an equal-opportunity employer, and we encourage candidates from all backgrounds to apply. If you are someone passionate to work on problems that matter, we’d love to hear from you!