ABOUT THE TEAM

Anduril’s Drones team is seeking a highly motivated Manufacturing Engineer who is early in their career and wants to join our rapidly growing team. In this pivotal role, you will be responsible for bridging the gap between cutting-edge design and efficient, high-volume production for our advanced Unmanned Aerial Systems (UAS) like Bolt, Ghost, Anvil, and future autonomous platforms.

As our team continues to quickly grow, we are looking for motivated candidates that are inspired to work within an extremely energetic, creative, and innovative team that is passionate about drone technology and high-rate production. We work in a highly dynamic environment where collaboration and idea sharing are a way of life.

WHAT YOU'LL DO

• Provide daily sustaining support to ensure each product line performs as intended, including real-time problem-solving related to mechanical fitment issues, electrical and harnessing issues, as well as software and firmware issues.
• Work with design engineers during the development process to drive design for manufacturing best practices into the design effort, and help facilitate the transition from design to prototype to rate production.
• Work hand in hand with the broader production team to solve complex issues to ensure customer demand is met.
• Write documentation required for successfully manufacturing hardware at scale, such as work instructions, quality plans, inspection requirements, etc.
• Develop novel tooling solutions for fabrication and assembly of structural parts
• Contribute to end-customer hardware mechanical or electrical design, including interconnects, board fabrication and inspection, etc.
• Analyze metrics for continuous improvement initiatives (cost reduction, QI reduction & capacity increase).
• Instill a culture of innovation, teamwork, and accountability within the manufacturing engineering product team.

Required Qualifications

• A degree in a technical field such as engineering or manufacturing
• 1+ years of experience in a relevant field, preferably manufacturing or design of electromechanical hardware
• Demonstrated ability to deliver electromechanical hardware in a resource-constrained environment
• Demonstrated in-kind or direct team leadership skills, with backing examples
• Experience physically manufacturing hardware via any means (machining, fabrication, soldering, assembly, etc.)
• A genuine interest in manufacturing, thirst for learning, and high degree of ownership
• U.S. Person status is required as this position needs to access export controlled data

PREFERRED QUALIFICATIONS

• Experience building successful production operations from scratch, often working with very little definition
• Harness & PCBA fabrication experience or proven competency in mechanical system design and analysis
• Ownership of a complex bill of materials for an electromechanical product
• Interesting work on personal or extracurricular project is a plus.

ABOUT THE JOB

WHAT YOU’LL DO:

Strategic and Technical Leadership:

• Recruit, mentor, develop, and lead a high-performing team of manufacturing engineers and integration & test engineers and foster a culture of innovation, excellence, collaboration, and continuous improvement.
• Serve as the primary manufacturing engineering lead for several assigned space programs, ensuring technical alignment and execution.
• Oversee the development, implementation, and optimization of manufacturing processes for complex, high-precision space-qualified hardware, including structures, propulsion, avionics, thermal systems, and optical components.
• Drive the vision and strategy for growing Anduril's space program, identifying new opportunities and areas for innovation.

New Product Introduction: 

• Ensure robust Design for Manufacturability (DFM) and Design for Assembly (DFA) principles are integrated throughout the product lifecycle, influencing design decisions from early concept phases.
• Lead Manufacturing Readiness Reviews (MRR) and production readiness assessments.
• Lead Test Readiness Reviews (TRR) and test campaign readiness assessments.
• Oversee the design, development, documentation, and optimization of manufacturing processes for highly complex, space components, sub-systems, and integrated systems.
• Establish and enforce rigorous quality control standards and inspection methods, ensuring all hardware meets stringent space-grade requirements and a zero-defect mentality.
• Provide technical guidance on manufacturing facility layout, equipment selection, and tooling design for both pilot builds and production environments, including cleanroom operations.

Cross-Functional Collaboration:

• Serve as the primary manufacturing engineering interface with Design Engineering, Supply Chain, Program Management, Test, and Operations.
• Collaborate with Supply Chain to assess supplier manufacturing capabilities, quality, and readiness for critical components.
• Support proposals, technical reviews, and customer briefings, representing manufacturing engineering capabilities and strategy.

REQUIRED QUALIFICATIONS:

• Degree in a technical field preferred such as engineering, math, or a hard science.
• At least 12+ years of experience in a relevant field, preferably space and satellite manufacturing, systems engineering, or design of electromechanical hardware.
• Demonstrated ability to creatively deliver electromechanical hardware in a resource-constrained environment.
• Experience in unit-level/space vehicle/system integration, assembly, and environmental testing (eg., vibration, thermal vacuum, acoustic, shock, and EMI/EMC)
• Background in integration and testing of avionics/optical payloads, solar, propulsion, ADCS, or other space hardware.
• Proven team leadership skills, with examples of successfully managing and developing a diverse team.
• Personal experience physically manufacturing hardware through various methods (machining, fabrication, soldering, assembly, etc.). Work on personal or extracurricular projects is a plus.
• Possess the ability to understand new concepts quickly; apply them accurately; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems.
• Familiarity with CAD software, Manufacturing Execution systems, and ERP/MRP systems.
• A genuine interest in manufacturing and a thirst for learning, particularly in the space domain.
• Willingness to travel frequently (>25%) to support global manufacturing operations
• Demonstrated success in scaling product testing and production from one to tens/hundreds.
• Active security clearance or ability to obtain a security clearance.

PREFERRED QUALIFICATIONS

• Experience in test hardware and software development
• Software scripting experience in python
• Experience writing test plans, procedures, and work instruction documentation.
• Ability to work effectively in space manufacturing environments.
• Demonstrated skill at driving and questioning design and customer requirements.

ABOUT THE JOB

Anduril's Manufacturing Engineering is seeking a Manufacturing Equipment Engineer to join our team. The Manufacturing Engineering department develops and implements robust manufacturing processes and tooling solutions to ensure Anduril's defense products are produced efficiently, reliably, and at scale at Anduril.

As a Manufacturing Equipment Engineer, you will support continuous operations and enable world class manufacturing of cutting edge defense products. As a Sustaining Equipment Engineer, you will drive Overall Equipment Efficiency (OEE) by continuously enhancing critical systems, including PLC/HMI logic, robotics, mechanical/electrical subsystems, and conveyance infrastructure. You will also play a key role in cross-functional teams, developing, introducing, and ensuring the long-term sustainment of new models, products, and materials. The right person for the role has a proven track record of significantly improving Overall Equipment Efficiency through sophisticated automation enhancements and successful collaboration on new product development.. If you are someone who has an analytical mindset, a relentless drive for continuous improvement in OEE, and excellent collaboration skills to work effectively across teams, then this role is for you.

This role will be based temporarily at Santa Ana, CA for a 3 month training period before transitioning to Asheville, OH. 

WHAT YOU’LL DO

• Analyze and optimize production equipment to ensure safety while maximizing Overall Equipment Effectiveness (OEE) in cost effective means while driving to achieve world-class quality levels
• Champion continuous improvement projects to maximize yield, cycle time, and availability of equipment. Report metrics to upper management
• Work hand in hand with process engineering and maintenance teams to resolve equipment issues, improve equipment reliability, and provide technical guidance
• Support operations to aggressively ramp newly launched products to full-scale production
• Develop Scada system to monitor, gather, and process real-time production data
• Perform in-depth root cause analysis for equipment failures and implement robust corrective and preventive actions to enhance system reliability and uptime.
• Collaborate with cross-functional teams including design engineering, quality, and production to ensure production related issues are rapidly resolved

REQUIRED QUALIFICATIONS

• Bachelor's degree in Electrical Engineering, Mechanical Engineering, Manufacturing Engineering, or a related technical field.
• 5+ years of experience in a manufacturing environment, specifically focused on equipment engineering, automation, or reliability.
• Demonstrated expertise in programming and troubleshooting PLCs (e.g., Allen-Bradley, Siemens), HMIs, and industrial automation systems.
• Strong understanding of robotics, motion control systems, and mechanical/electrical subsystems in a production setting.
• Proven ability to lead and execute continuous improvement initiatives (e.g., Lean, Six Sigma) resulting in measurable OEE gains.
• Strong troubleshooting and problem-solving skills with ability to implement effective solutions quickly
• Excellent problem-solving abilities, analytical skills, and attention to detail.
• Experience working in a fast-paced, high-volume manufacturing environment.
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Experience with Vision Systems for automated inspection and guidance.
• Proficiency in CAD software (e.g., SolidWorks, AutoCAD) for equipment design and layout.
• Lean Six Sigma certification (Green Belt or Black Belt).
• Prior experience in the defense, aerospace, or med-tech industries.
• Currently possesses and is able to maintain an active U.S. Secret security clearance

ABOUT THE TEAM

Anduril Intelligence Systems (AIS) is focused on positioning Anduril as a lead provider of specialized engineering and products for Intelligence Community (IC) customers. We work within the IC to understand their requirements, shape their concepts of operation, and deliver exquisite capability across their problem set. We aim to develop and deploy critically needed capabilities that address our customers’ most pressing national security requirements.

ABOUT THE JOB

We are seeking a Manufacturing Operations Manager, Intelligent Systems to join our manufacturing team at Anduril. Here you will work on cutting-edge technology aimed at advancing the state-of-the-possible. The Manager of Manufacturing Operations will build and manage a team of highly talented technicians to produce multiple platforms of hardware for strategic military and commercial customers. This is a highly dynamic role that requires both frontline technical and people management skills. The Manufacturing Operations Manager, Intelligent Systems is at the forefront of delivering exceptional customer experiences, fostering team development, and overseeing day-to-day vehicle delivery operations. Success in this role demands consistent achievement across customer satisfaction, team management, operations, and financial goals

The ideal candidate will have high volume mixed production and new product introduction (NPI) to scaled production experience. The ideal candidate combines technical acumen for effective communication, strong time-management skills, and a passion for leading transformative change. The ideal candidate should be energetic, highly organized, and deeply committed to sustainable energy. While individual contributions are valued, teamwork is crucial for achieving the highest level of success.

**This role requires candidates to relocate to Costa Mesa for a 3 to 6 month training program. Housing, transportation, etc. will be provided during your stay.

WHAT YOU’LL DO

• Manage technician staff in the production and delivery of various hardware through factory acceptance. You will have the critical task of managing the priorities, equipment, and people associated with the production line
• Set priorities and direct daily operations to include timely issuing and completion of work orders to the production floor
• Ensure all operators are following safety procedures and their teams' safety training is current, documenting EHS incidents, correcting proactively workplace hazards in the areas, and empowering others to continuously improve operations
• Manage, coach, mentor and support production technicians
• Prioritize work activities for operators to achieve target on time delivery goals
• Ensure quality standards are being met throughout the entire production process and support no defects from leaving a station or team area
• Be able to provide high level reports out to Production Managers, Directors, and Head of Manufacturing as needed.
• Be an active participant in 5S and continuous improvement activities
• Complete transactions in production systems (NetSuite / JIRA Anduril MES) on daily basis
• Work cross functionally to ensure inventory levels are maintained and accurate in each work area
• Provide weekly report out of production progress, blockers, risks, needs. Generate daily pass downs and weekly production reports for engineering and operations team
• Lead daily communication with cross functional team such as engineering, technicians, supply chain, logistics, and quality as necessary
• Build a positive and collaborative team culture that promotes product knowledge, skills development, and X-training
• Show up every day with a high level of urgency and enthusiasm to get the job done

REQUIRED QUALIFICATIONS

• 7+ years experience in production-oriented or electro-mechanical technician fields with at least 3+ years in a supervisor or production operations lead/manager role in a high volume mixed product production environment
• Experience working with ERP and MES systems
• A full understanding of the product life cycle (NPI to scaled production), LEAN manufacturing principals, and change management (ECOs)
• Can interpret technical documentation (mechanical drawings, work instructions, building plans, equipment specs, electrical schematics, etc.)
• Extremely reliable, organized and detail-oriented with excellent verbal & written communication skills
• You have a passion for employee development and enjoy the process of training and developing both new hires and veteran production staff
• Have proven skills in both process and equipment troubleshooting, allowing you to easily adapt to constantly changing production environments
• Experience supporting process development
• Knowledge of 5S, lean manufacturing or 6-Sigma principles
• Excellent written and verbal communication skills
• Currently possesses and is able to maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Associate’s or Bachelor’s degree in a technical field (engineering, business, or applied science)
• Lean six sigma green belt certified
• Working knowledge of AS9100 standards and OSHA laws
• Experience in small electronic assembly

Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century’s most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril’s family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years.

ABOUT THE JOB

The Manufacturing Team is responsible for rapidly iterating and building cutting-edge defense hardware, including static equipment, moving ground equipment, and flight vehicles. Within manufacturing engineering, The Industrial Engineering team is responsible for optimizing Anduril’s manufacturing operations for innovative, high volume, cost effective manufacturing. The IE team works across the lifecycle, from developing new production lines to scaling to continuous improvement. In this position, you will have the opportunity to help define what industrial engineering looks like for Anduril at a global scale. You’ll support increasing efficiencies throughout our end-to-end processes, all with a focus on introducing scale and resiliency into our growing people and tools footprint. If you thrive in fast-paced, technical environments and excel at juggling multiple responsibilities, we want to hear from you.

WHAT YOU'LL DO:

Project Planning and Execution

• Define project scope, create schedules, and manage all phases from conception to completion
• Develop and manage project budgets, track costs, and ensure adequate staffing and tools are available
• Collaborate with cross-functional teams including manufacturing engineering, manufacturing operations design engineering, business lines, and facilities - gathering requirements, providing updates, managing expectations, and addressing concerns.
• Lead initiatives across Anduril sites to solve ongoing production issues, set up new facilities and production lines, and support deployment and harmonization of Industrial Engineering across global sites.

Data Analysis and Reporting

• Execute scrappy analyses on short-timelines to get answers quickly, while also considering more scalable solutions that will make Anduril successful in the long term
• Analyze manufacturing data to identify trends, patterns, and areas for improvement manufacturing processes.
• Facilitate data-driven decision-making by providing timely and accurate manufacturing information.

Systems and Processes Improvement

• Analyze best practices across teams and develop ways to standardize and implement across all teams.
• Assist in the documentation and standardization of business procedures and reporting protocols.
• Collaborate with digital tools team to evaluate solutions to improve the efficiency of industrial engineers in delivering solutions such as simulations, capacity plans, facility layouts
• Support adoption tracking for new IE standards across distributed team

Capacity Planning and Management

• Work with space planning and capacity management teams to understand product and facility plans of record and marry to test plans of record
• Develop a playbook and tactical plans for product facility moves

REQUIRED QUALIFICATIONS:

• Bachelor’s degree in engineering, data science, business, or related field.
• 2+ years of experience in a manufacturing environment, with a focus on data analysis, program support, or process improvement.
• Strong analytical aptitude and can intuitively think about problems in terms of numbers and data-models
• Strong written and verbal communication abilities, with the capacity to present complex data clearly to diverse audiences
• A reliable self-starter, highly organized, resourceful, with attention to detail
• Must be a U.S. Person due to required access to U.S. export controlled information or facilities.

PREFERRED QUALIFICATIONS:

• Experience working in a manufacturing environment
• Familiarity with MES, ERP, and PLM systems and how they interface with each other and with operations
• Familiarity with Confluence/JIRA, SharePoint and Airtable

ABOUT THE TEAM

Anduril’s Space Manufacturing team is seeking an experienced and dynamic Senior Space Vehicle EO/IR Integration and Test Engineer to join our Space Assembly, Integration, and Test team. The Space Manufacturing team is responsible for assembly, integration, and test of ground support equipment, PCBA, unit-level, and integrated systems that are vital for our aerospace and defense operations. Your expertise will help ensure that our products meet the highest standards of quality and reliability at Anduril.

As the Senior Space Vehicle EO/IR Integration and Test Engineer, you will lead satellite integration and testing campaigns, focusing on EO/IR systems such as photon detecting imagers from visible through long wave infrared wavebands including CMOS and CCD focal planes, thermal sensors including microbolometers, as well as LIDAR and laser range finders. Your responsibilities include developing integration plans and procedures, resolving test anomalies, managing test campaign. schedule, and conducting environmental tests (e.g, TVAC, shock, vibration, EMI/EMC). The role requires collaboration with cross-functional engineering teams and expertise in space systems. This position offers ownership of mission-critical projects, opportunities to work with cutting-edge technology and develop processes to ensure successful integration and test of space systems. Offers career growth in a dynamic, fast-paced environment.

WHAT YOU’LL DO

• Lead end-to-end integration and test (I&T) campaigns for space vehicles, focusing on EO/IR payloads
• Develop and implement integration and test plans, along with associated operational procedures
• Manage schedules and timelines for space vehicle I&T operations to meet project deliverables
• Diagnose and resolve anomalies or non-conformances encountered during integration and testing processes
• Conduct environmental test campaigns, including thermal vacuum (TVAC), shock, vibration, EMI/EMC, and acoustics testing
• Utilize and modify test scripts for test automation, diagnostics, and troubleshooting during space vehicle testing
• Operate and maintain test equipment such as bus control test racks for space vehicle test campaign
• Collaborate with cross-functional teams, including systems, thermal, mechanical, electrical, firmware, and software engineers, to ensure integration and test success
• Contribute to the development and refinement of I&T processes for the growing Space AI&T team, with opportunities to expand into mechanical and optical integration tasks

REQUIRED QUALIFICATIONS

• Minimum Bachelor’s degree in Electrical Engineering, Aerospace Engineering, System Engineering, or a similar field
• At least 8+ years of experience in. relevant field, preferably space and satellite manufacturing, systems engineering, or design of EO/IR hardware
• Proven experience leading large-scale space vehicle I&T campaigns with focus on EO/IR systems
• Expertise in developing integration and test plans with associated procedures
• Strong ability to troubleshoot and resolve anomalies/non-conformances during integration and testing
• Hands-on experience with environmental test campaigns (e.g., TVAC, shock, vibration, EMI/EMC, acoustics)
• Proficiency in Python scripting for test automation and diagnostics
• Experience working with collimators, integrating spheres, theodolites, laser trackers, interferometers, and other optical test equipment
• Experience working with classified systems, including performing keying operations
• Demonstrated experience utilizing MES/ERP/MRP systems for tracking and managing integration tasks
• Active security clearance or ability to obtain a security clearance

PREFERRED QUALIFICATIONS

• Background in testing and integrating electro-optical (EO) and infrared (IR) payloads or instruments
• Experience with advanced payload analyses and laboratory measurements with photon transfer, dark current, radiometry, responsivity, distortion mapping, boresight alignments, non-uniformity corrections, point spread function, modulation transfer function, and more
• Experience with optical test equipment from Labsphere, 4D Technologies, Leica, SORL, and other industry leaders
• Familiarity with integrating space vehicles and payloads at launch sites, including pre-launch checkouts and troubleshooting
• Ability to use CAD tools for reviewing or assisting with design modifications related to integration processes
• Strong understanding of industry standards for shock, vibration, acoustics, TVAC, and EMI/EMC testing
• Advanced experience with handling secure systems and classified operations beyond baseline keying activities
• Familiarity with scaling integration and test processes for companies that build multiple satellites at once
• History of leading cross-functional engineering teams across hardware, software, thermal, mechanical, and structural disciplines
• Previous involvement in the preparation and integration of satellites for launch and mission finalization
• Advanced ability to develop or extensively modify Python test scripts for automation and diagnostics
• Experience working in fast-paced aerospace companies or startups, showcasing adaptability and innovative problem-solving skills

ABOUT THE PRODUCT

ABOUT THE TEAM

Anduril’s Manufacturing Team is seeking a Senior Industrial Engineer to join our team with an emphasis on manufacturing optimization. The role will support the development of simulation and optimization models to predict the behavior of manufacturing processes to drive real world adaptations. Executing on this responsibility will entail active collaboration with other Anduril teams, including but not limited to Supply Chain, Engineering, Quality, and Business Operations. The Manufacturing Team is responsible for rapidly iterating and building cutting-edge defense hardware, including static equipment, moving ground equipment, sensors, undersea, and flight vehicles, and scaling these products in our new 5M sq ft manufacturing facility, Arsenal-1.

ABOUT THE ROLE

The right person for this role can demonstrate holistic ownership on solving operational challenges with creative solutions in a fast-paced, resource-limited environment. This person will be flexible to change and ambiguity in their working environment, while working to ensure products are built and shipped on-time under stringent quality standards. If you are someone who thrives as the connective tissue among operational stakeholders to bring a production team forward, then this role is for you.

ABOUT THE JOB

Anduril's Manufacturing Engineering is seeking a Manufacturing Tooling Engineer to join our team in Ohio. The Manufacturing Engineering department develops and implements robust manufacturing processes and tooling solutions to ensure Anduril's defense products are produced efficiently, reliably, and at scale at Anduril.

As Manufacturing Tooling Engineer, you will design, develop, and maintain innovative tooling systems that enhance our manufacturing capabilities and production efficiency. The right person for this role has strong mechanical design skills, expertise in CAD software, experience with tool fabrication processes, and knowledge of manufacturing systems integration. If you are someone who thrives in a fast-paced environment, enjoys solving complex tooling challenges, and is passionate about supporting cutting-edge defense technology manufacturing with creative tooling solutions then this role is for you.

This role will be based temporarily at Santa Ana, CA for a 3 month training period before transitioning to Asheville, OH.

WHAT YOU’LL DO

• Build things that build things
• Design and develop custom tooling, fixtures, and jigs to support manufacturing operations across multiple product lines
• Design integrated end of arm tooling for manufacturing operations that demand high quality and repeatability
• Create detailed technical drawings, 3D models, and specifications for tool fabrication using advanced CAD software
• Troubleshoot and resolve tooling-related issues in production environments to minimize downtime
• Collaborate with cross-functional teams including design engineers, manufacturing engineers, and production staff to integrate tooling solutions with manufacturing systems
• Conduct failure analysis on tooling and implement design improvements to enhance performance and durability. Develop and release PM procedures.
• Manage tooling budgets, vendor relationships, and outside fabrication of specialized tooling
• Support continuous improvement initiatives aimed at reducing costs and improving manufacturing throughput
• Ensure all tooling designs comply with safety standards and regulatory requirements

REQUIRED QUALIFICATIONS 

• Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or related technical field
• 5+ years of experience in manufacturing tooling design and implementation
• Expert capability with (at least one) 3D CAD software (NX, SolidWorks, Inventor, or CATIA)
• Demonstrated experience with tooling design for precision manufacturing processes
• Knowledge of machining processes, materials properties, and manufacturing methods
• Expert in GD&T (Geometric Dimensioning and Tolerancing)
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS 

• Experience in defense, aerospace, or other high-reliability manufacturing environments
• Knowledge of automation systems and integration with tooling solutions
• Experience with tool lifecycle management and maintenance planning
• Familiarity with lean manufacturing principles and Six Sigma methodologies
• Background in rapid prototyping and iterative design
• Currently possesses and is able to maintain an active U.S. Secret security clearance

ABOUT THE TEAM:

Anduril’s Drones team is seeking a highly motivated and experienced Lead Manufacturing Engineer to join our rapidly growing team. In this pivotal role, you will be responsible for bridging the gap between cutting-edge design and efficient, high-volume production for our advanced Unmanned Aerial Systems (UAS) like Bolt, Ghost, Anvil, and future autonomous platforms.

As a Lead Manufacturing Engineer in Drones, you will support products from the early design phase, develop/improve the manufacturing process and support production ramps for several products. The diverse responsibilities of this role will require you to leverage your technical expertise as well as leadership skills to set objectives, build cross-functional teams, and drive rapid project execution. You will play a crucial role in optimizing manufacturing processes, reducing costs, and increasing efficiencies on existing technologies while also developing new products and scaling to full scale production.

WHAT YOU’LL DO:

• Build, mentor, and lead a high-performing team of Manufacturing Engineers with deep product knowledge in mechanical, electrical, system integration, and end of line tests
• Lead the transition of products from concept to prototype, pilot, and full production with speed, flexibility, scalability, and first-time quality
• Provide daily sustaining support to ensure each product line performs as intended, including real-time problem-solving related to mechanical fitment issues, electrical and harnessing issues, as well as software and firmware issues
• Work with cross functional team (design, quality, supply chain, etc.) during the development process to drive design for manufacturing best practices into the design effort, and help facilitate the transition from design to prototype to rate production
• Own documentation required for successfully manufacturing product group hardware at scale, such as MBOM’s, work instructions & requirements, etc.
• Uphold and advise on quality management and business application programs as they pertain to manufacturing within your area
• Facilitate make versus buy decisions, and coordinate with internal supply chain teams to manage vendors to ensure quality deliveries on time
• Contribute to end-customer hardware mechanical or electrical design, including interconnects, board fabrication and inspection, etc.
• Analyze metrics for continuous improvement initiatives (cost reduction, QI reduction & capacity increase)
• Instill a culture of innovation, teamwork, and accountability within the manufacturing engineering product team

REQUIRED QUALIFICATIONS:

• Degree in a technical field such as engineering, math, or a hard science
• 5+ years in manufacturing or similar prototyping position
• Demonstrated in-kind or direct team leadership skills, with backing examples
• An attitude of world-class mission assurance, quality, attention to detail, and dedication
• A genuine interest in manufacturing and thirst for learning
• Demonstrated ability to creatively deliver hardware in a resource-constrained environment
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS:

• Experience building or transforming successful production operation organizations and leading large-scale change management initiatives that influence culture, define tools & processes and improve competencies.
• Harness & PCBA fabrication experience including prior work with or setup/modification/monitoring SMT processes.
• Experience leading and managing teams on fast-paced, complex projects.
• Hands-on experience with R/C and/or autonomous flight vehicles, flight controllers, or other related control systems.
• Software scripting experience in any language.
• Experience in NX/Teamcenter

As the Head of Manufacturing Test Engineering, your role encompasses the strategic oversight and tactical management of production systems to support high-volume products at Arsenal. You are charged with ensuring rigorous testing protocols are in place, resulting in the consistent delivery of superior quality products to our customers. Furthermore, your leadership guarantees the fulfillment of manufacturing's test throughput requirements. This position demands an innovative approach to resolving complex testing challenges, advancing scalability, and enhancing our automation, throughput, user interfaces, and data analytics methodologies.

WHAT YOU’LL DO

• Direct the manufacturing test engineering team, set objectives, guide initiatives, and assess team outcomes.
• Architect and oversee the manufacturing test strategy to ensure scalable operations across Anduril, transitioning from pre-production to full-scale output.
• Strategize and implement advancements in manufacturing testing, focusing on automation, uniformity, and operational streamlining.
• Evaluate test data, compile findings, and identify opportunities for product and process enhancements.
• Establish a robust test infrastructure capable of evaluating diverse hardware scales and complexities.
• Communicate strategic visions to key stakeholders, guiding the scaling of platforms from pre-production (LRIP) through to mass production (FRP).
• Collaborate with product development for design testability, ensuring seamless production integration.
• Lead the procurement and implementation of new test equipment, performing cost-benefit and ROI analyses as needed.
• Champion initiatives that enhance safety, reduce costs, improve quality, and increase productivity through testing.
• Develop test protocols within our digital tool stack and provide comprehensive training to technicians and engineers.
• Determine data collection needs and develop architecture for actionable reporting of data.
• Administer testing budgets and predict resource requirements for personnel, equipment, and materials.
• Implement comprehensive training and documentation to elevate team expertise and support knowledge transfer.
• Cultivate a culture focused on innovation, collaboration, and accountability in the engineering department.
• Act as the go-to technical authority for manufacturing test matters, advising on and troubleshooting complex issues.
• Design proactive maintenance and calibration protocols for manufacturing test equipment.

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Electrical/Electronics, Computer, Mechanical Engineering, or a related field.
• Minimum of 5 years of relevant industry experience leading manufacturing test engineering.
• Expertise in Linux, C#, Python, and NixOS.
• Solid experience with PCBA/electronic assembly testing and knowledge of testing standards.
• Proficiency in using electronic test equipment.
• Strong analytical skills for root cause analysis of non-conforming hardware.
• Familiar with Product Life Cycle (PLM) systems, Manufacturing Execution Systems (MES), and Test Execution Systems (TES)
• Experience in managing projects that integrate electrical, mechanical, and software/firmware systems.
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Advanced degree in a relevant engineering discipline.
• Demonstrated ability to lead the development of manufacturing test systems and teams.
• Proficiency in LabVIEW, MATLAB, and test automation.
• Knowledge of PCBA design, mechanical design, and ESS testing.
• Familiarity with various hardware communication protocols.
• Experience with HASS & ESS-related testing (Thermal, Vibration, etc.)
• Currently possesses and is able to maintain an active U.S. Secret security clearance

ABOUT THE TEAM

Anduril’s Industrial Engineering team is seeking a Lead Industrial Engineer to join our team. The Manufacturing organization is responsible for rapidly iterating and building cutting-edge defense hardware, including static equipment, moving ground equipment, sensors, undersea and flight vehicles, and scaling these products in our new 5M sq ft manufacturing facility, Arsenal-1.

The Industrial Engineering team is responsible for optimizing Anduril’s manufacturing operations for innovative, high volume, cost effective manufacturing. The IE team works across the lifecycle, from developing new production lines to scaling to continuous improvement.

ABOUT THE JOB

We are looking for a Lead Industrial Engineer to join our rapidly growing team in Costa Mesa. In this role, you will be responsible for leading an industrial engineering team across a portfolio of product lines, driving production operations to achieve KPIs, supporting the development of new production lines and the implementation of new products, developing and deploying industrial engineering best practices, and driving rapid project execution. If you can demonstrate holistic ownership in solving operational challenges with creative solutions in a fast-paced, resource-limited environment, while remaining flexible in the face of change and ambiguity and providing data-driven solutions and recommendations, then this role is for you.

WHAT YOU'LL DO

Owning Strategic Projects

• Own the design and bring up of production lines and factories, collaborating closely with Facilities, Manufacturing Engineering, Mfg Ops, and Material Flow organizations.
• Partner with manufacturing leadership to assess and solve build plan scenarios and align factory design strategy for future manufacturing sites.
• Lead initiatives across Anduril sites to solve ongoing production issues, set up new facilities and production lines, and support deployment and harmonization of Industrial Engineering across global sites.

Team Leadership and Support

• Effectively lead a team of Industrial Engineers across multiple products or a family of products to setup and optimize production systems.
• Play a key role in the growth of the Industrial Engineering organization by creating and standardizing internal tools and processes, mentoring and training junior team members, and fostering a collaborative and productive environment rooted in accountability.
• Be a trusted subject matter expert for Industrial Engineering fundamentals and tools such as capacity and labor modeling, factory design, simulation, process improvement, and data analytics.

Industrial Engineering

• Produce and maintain capacity models and production ramp plans to define labor planning, capex requirements, workstation design, and throughput gaps.
• Design effective facility layouts and production lines using CAD and simulation which meet process requirements, enable production targets, optimize resource allocation and material flow, and maximize productivity and quality.
• Identify and champion improvements to key causes of high variability or production bottlenecks, driving actions to resolution across disciplines and stakeholders.
• Leverage a data-driven approach to production design and process improvements to improve throughput.

REQUIRED QUALIFICATIONS

• Bachelor's degree in Industrial Engineering, Operations Excellence, or a related field.
• Minimum of 8+ years of experience in industrial engineering or similar position.
• Demonstrated ability to scale production in a resource-constrained environment.
• Demonstrated ability to measurably improve production metrics, such as cost, yield, and throughput.
• Deep understanding of the requirements of manufacturing systems, processes, and organizations to enable scalable production.
• Proficiency in Industrial Engineering tools such as CAD (2D & 3D), Excel, Minitab, etc.
• Excellent project management skills and experience leading cross-functional projects.
• Strong analytical, problem-solving, and decision-making capabilities.
• Ability to manage multiple priorities in a fast-paced and dynamic environment.
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Experience building or transforming successful production operation organizations and leading large-scale initiatives that influence culture, define tools and processes, and improve competencies.
• Experience leading and managing teams on fast-paced, complex projects.
• Exposure to defense, aerospace, or automotive industries.
• Previous experience designing, building out, and commissioning factories (greenfield or brownfield).
• Current active U.S. Secret security clearance

ABOUT THE TEAM:

Anduril’s Missiles Manufacturing team is seeking a Lead Manufacturing Engineer to lead the manufacturing process development for our products. The Manufacturing Team is responsible for rapidly iterating and building cutting-edge defense hardware, including static equipment, moving ground equipment, and complex vehicles. This responsibility includes everything in the manufacturing value-chain including, but not limited to, Design for Manufacturability, tool design & selection, process creation & optimization, vendor sourcing & interaction, quality planning, and work documentation associated with the hardware.

ABOUT THE ROLE:

As a Lead Manufacturing Engineer, you will be responsible for leading a manufacturing engineering team to drive process improvements, ensure the highest quality of production, and support the development and implementation of new products. The diverse responsibilities of this role will require you to leverage your technical expertise as well as leadership skills to set objectives, build cross-functional teams, and drive rapid project execution. You will play a crucial role in optimizing manufacturing processes, reducing costs, and increasing efficiencies on existing technologies while developing new products and scaling to full scale production. 

WHAT YOU’LL DO:

• Execute the manufacturing of a certain product or set of products, from initial prototyping through large full-scale production.
• Lead a team responsible for delivering on-time completion of development and production units within a product group.
• Work with design engineers during the development process to drive design for manufacturing best practices into the design effort, and help facilitate the transition from design to prototype to rate production.
• Act as a manufacturing lead for mechanical fabrication and avionics with subject matter expertise in these areas and key experience in design for manufacturability.
• Own documentation required for successfully manufacturing product group hardware at scale, such as MBOM’s, work instructions & requirements, etc.
• Uphold and advise on quality management and business application programs as they pertain to manufacturing within your area.
• Facilitate make versus buy decisions, and coordinate with internal supply chain teams to manage vendors to ensure quality deliveries on time.
• Collaborate with internal customers and manufacturing planning teams to define capacity planning actions to meet customer needs and expectations.
• Analyze metrics for continuous improvement initiatives (cost reduction, QI reduction & capacity increase).
• Instill a culture of innovation, teamwork, and accountability within the manufacturing engineering product team.
• Develop production and test methodologies and implement best practices to enable scaling production capabilities for larger, more complex products.
• Travel to suppliers and partner sites to do initial sourcing work, solve ongoing production issues, and implement process procedures as required.

REQUIRED QUALIFICATIONS:

• Degree in a technical field such as engineering, math, or a hard science.
• 8+ years in manufacturing or similar prototyping position.
• Demonstrated in-kind or direct team leadership skills, with backing examples.
• An attitude of world-class mission assurance, quality, attention to detail, and dedication.
• A genuine interest in manufacturing and thirst for learning.
• Demonstrated ability to creatively deliver hardware in a resource-constrained environment.
• Personal experience physically manufacturing hardware via any means (machining, fabrication, soldering, assembly, etc.). Work on personal or extracurricular projects is a plus.
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Experience building or transforming successful production operation organizations and leading large-scale change management initiatives that influence culture, define tools & processes and improve competencies.
• Harness & PCBA fabrication experience including prior work with or setup/modification/monitoring SMT processes.
• Experience leading and managing teams on fast-paced, complex projects.
• Hands-on experience with R/C and/or autonomous flight vehicles, flight controllers, or other related control systems.
• Software scripting experience in any language.
• Current active U.S. Secret security clearance

ABOUT THE JOB

WHAT YOU’LL DO:

Strategic and Technical Leadership:

• Recruit, mentor, develop, and lead a high-performing team of manufacturing engineers and integration & test engineers and foster a culture of innovation, excellence, collaboration, and continuous improvement.
• Serve as the primary manufacturing engineering lead for several assigned space programs, ensuring technical alignment and execution.
• Oversee the development, implementation, and optimization of manufacturing processes for complex, high-precision space-qualified hardware, including structures, propulsion, avionics, thermal systems, and optical components.
• Drive the vision and strategy for growing Anduril's space program, identifying new opportunities and areas for innovation.

New Product Introduction: 

• Ensure robust Design for Manufacturability (DFM) and Design for Assembly (DFA) principles are integrated throughout the product lifecycle, influencing design decisions from early concept phases.
• Lead Manufacturing Readiness Reviews (MRR) and production readiness assessments.
• Lead Test Readiness Reviews (TRR) and test campaign readiness assessments.
• Oversee the design, development, documentation, and optimization of manufacturing processes for highly complex, space components, sub-systems, and integrated systems.
• Establish and enforce rigorous quality control standards and inspection methods, ensuring all hardware meets stringent space-grade requirements and a zero-defect mentality.
• Provide technical guidance on manufacturing facility layout, equipment selection, and tooling design for both pilot builds and production environments, including cleanroom operations.

Cross-Functional Collaboration:

• Serve as the primary manufacturing engineering interface with Design Engineering, Supply Chain, Program Management, Test, and Operations.
• Collaborate with Supply Chain to assess supplier manufacturing capabilities, quality, and readiness for critical components.
• Support proposals, technical reviews, and customer briefings, representing manufacturing engineering capabilities and strategy.

REQUIRED QUALIFICATIONS:

• Degree in a technical field preferred such as engineering, math, or a hard science.
• At least 8+ years of experience in a relevant field, preferably space and satellite manufacturing, systems engineering, or design of electromechanical hardware.
• Demonstrated ability to creatively deliver electromechanical hardware in a resource-constrained environment.
• Experience in unit-level/space vehicle/system integration, assembly, and environmental testing (eg., vibration, thermal vacuum, acoustic, shock, and EMI/EMC)
• Background in integration and testing of avionics/optical payloads, solar, propulsion, ADCS, or other space hardware.
• Proven team leadership skills, with examples of successfully managing and developing a diverse team.
• Personal experience physically manufacturing hardware through various methods (machining, fabrication, soldering, assembly, etc.). Work on personal or extracurricular projects is a plus.
• Possess the ability to understand new concepts quickly; apply them accurately; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems.
• Familiarity with CAD software, Manufacturing Execution systems, and ERP/MRP systems.
• A genuine interest in manufacturing and a thirst for learning, particularly in the space domain.
• Willingness to travel frequently (>25%) to support global manufacturing operations
• Demonstrated success in scaling product testing and production from one to tens/hundreds.
• Active security clearance or ability to obtain a security clearance.

PREFERRED QUALIFICATIONS

• Experience in test hardware and software development
• Software scripting experience in python
• Experience writing test plans, procedures, and work instruction documentation.
• Ability to work effectively in space manufacturing environments.
• Demonstrated skill at driving and questioning design and customer requirements.

ABOUT THE TEAM:

Anduril’s Missiles Manufacturing team is seeking a Senior Manufacturing Engineer to lead the development of manufacturing processes for our advanced defense products. This team is responsible for rapidly iterating and producing cutting-edge hardware, including static equipment, ground systems, and complex vehicles.

ABOUT THE ROLE:

As a Senior Manufacturing Engineer, you will play a key role in shaping the manufacturing design for Anduril’s Missile division. Your core responsibilities include ensuring the highest production quality and supporting the development and implementation of new products for several program designs. The role encompasses the entire manufacturing value chain, including Design for Manufacturability, tool design and selection, process creation and optimization, vendor sourcing and collaboration, quality planning, and documentation for hardware production.

WHAT YOU’LL DO:

• Execute the manufacturing of a certain product or set of products, from initial prototyping through large full-scale production.
• Work with design engineers during the development process to drive design for manufacturing best practices into the design effort, and help facilitate the transition from design to prototype to rate production.
• Act as a manufacturing liason for mechanical fabrication and avionics with subject matter expertise in these areas and key experience in design for manufacturability.
• Own documentation required for successfully manufacturing product group hardware at scale, such as MBOM’s, work instructions & requirements, etc.
• Advise on quality management and business application programs as they pertain to manufacturing within your area.
• Collaborate with internal customers and manufacturing planning teams to define capacity planning actions to meet customer needs and expectations.
• Analyze metrics for continuous improvement initiatives (cost reduction, QI reduction & capacity increase).
• Instill a culture of innovation, teamwork, and accountability within the manufacturing engineering product team.
• Develop production and test methodologies and implement best practices to enable scaling production capabilities for larger, more complex products.
• Travel to suppliers and partner sites to do initial sourcing work, solve ongoing production issues, and implement process procedures as required.

REQUIRED QUALIFICATIONS:

• Degree in a technical field such as engineering, math, or a hard science.
• 5+ years in manufacturing or similar prototyping position.
• An attitude of world-class mission assurance, quality, attention to detail, and dedication.
• A genuine interest in manufacturing and thirst for learning.
• Demonstrated ability to creatively deliver hardware in a resource-constrained environment.
• Personal experience physically manufacturing hardware via any means (machining, fabrication, soldering, assembly, etc.). Work on personal or extracurricular projects is a plus.
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Experience building or transforming successful production operation organizations and leading large-scale change management initiatives that influence culture, define tools & processes and improve competencies.
• Harness & PCBA fabrication experience including prior work with or setup/modification/monitoring SMT processes.
• Hands-on experience with R/C and/or autonomous flight vehicles, flight controllers, or other related control systems.
• Current active U.S. Secret security clearance

ABOUT THE JOB

The Manufacturing Team is responsible for rapidly iterating and building cutting-edge defense hardware, including static equipment, moving ground equipment, and flight vehicles. In this position, you will own large parts of the end-to-end manufacturing KPI tracking - enhancing transparency and generating actional reports to support strategic and tactical decision making. You’ll support increasing efficiencies throughout our end-to-end processes, all with a focus on introducing scale and resiliency into our growing people and tools footprint. If you thrive in fast-paced, technical environments and excel at juggling multiple responsibilities, we want to hear from you.

WHAT YOU'LL DO:

Program Oversight and Support

• Support program managers and manufacturing leadership in preparation and management of critical technical and business forums
• Provide structure to ambiguity and helping drive manufacturing engineering stakeholders towards decisions on tactical and strategic issues
• Develop and execute strategies to drive business impact and outcomes

Data Analysis and Reporting 

• Execute scrappy analyses on short-timelines to get answers quickly, while also considering more scalable solutions that will make Anduril successful in the long term
• Analyze manufacturing data to identify trends, patterns, and areas for improvement manufacturing processes.
• Facilitate data-driven decision-making by providing timely and accurate manufacturing information.

Systems and Processes Improvement

• Develop an understanding of how our manufacturing engineering systems (ERP, MRP, PLM etc.) function and how to leverage data from them to equip manufacturing engineering teams with insights and tools to make tactical and strategic decisions.
• Analyze best practices across teams and develop ways to standardize and implement across all teams.
• Assist in the documentation and standardization of business procedures and reporting protocols.

REQUIRED QUALIFICATIONS:

• Bachelor’s degree in engineering, data science, business, or related field.
• 5+ years of experience in a manufacturing environment, with a focus on data analysis, program support, or process improvement.
• Strong analytical aptitude and can intuitively think about problems in terms of numbers and data-models
• Strong written and verbal communication abilities, with the capacity to present complex data clearly to diverse audiences
• A reliable self-starter, highly organized, resourceful, with attention to detail
• Must be a U.S. Person due to required access to U.S. export controlled information or facilities.

PREFERRED QUALIFICATIONS:

• Experience working in a manufacturing environment
• Familiarity with MES, ERP, and PLM systems and how they interface with each other and with operations
• Familiarity with Confluence/JIRA, SharePoint and Airtable
• Familiarity with SQL, Typescript, PowerBI, Tableau, Foundry, Databricks

ABOUT THE TEAM

Anduril’s Space Manufacturing team is seeking an experienced and dynamic Senior Space Vehicle Electrical Integration and Test Engineer to join our Space Assembly, Integration, and Test team. The Space Manufacturing team is responsible for assembly, integration, and test of ground support equipment, PCBA, unit-level, and integrated systems that are vital for our aerospace and defense operations. Your expertise will help ensure that our products meet the highest standards of quality and reliability at Anduril.

As the Senior Space Vehicle Electrical Integration and Test Engineer, you will lead satellite integration and testing campaigns, focusing on electrical systems such as avionics and power payloads, and harness wiring for a specific program. Your responsibilities include developing integration plans and procedures, resolving test anomalies, managing test campaign. schedule, and conducting environmental tests (e.g, TVAC, shock, vibration, EMI/EMC). The role requires collaboration with cross-functional engineering teams and expertise in space systems. This position offers ownership of mission-critical projects, opportunities to work with cutting-edge technology and develop processes to ensure successful integration and test of space systems. Offers career growth in a dynamic, fast-paced environment.

WHAT YOU’LL DO

• Lead end-to-end integration and test (I&T) campaigns for space vehicles, including electrical systems such as avionics, power payloads, and harness wiring.
• Develop and implement integration and test plans, along with associated operational procedures.
• Manage schedules and timelines for all space vehicle I&T operations to meet project deliverables.
• Diagnose and resolve anomalies or non-conformances encountered during integration and testing processes.
• Conduct environmental test campaigns, including thermal vacuum (TVAC), shock, vibration, EMI/EMC, and acoustics testing.
• Utilize and modify test scripts for test automation, diagnostics, and troubleshooting during space vehicle testing.
• Operate and maintain test equipment such as radio test racks, and bus control test racks for space vehicle test campaign.
• Collaborate with cross-functional teams, including systems, thermal, mechanical, electrical, firmware, and software engineers, to ensure integration and test success..
• Contribute to the development and refinement of I&T processes for the growing Space AI&T team, with opportunities to expand into mechanical and optical integration tasks.

REQUIRED QUALIFICATIONS

• Minimum Bachelor’s degree in Electrical Engineering, Aerospace Engineering, System Engineering, or a similar field.
• At least 8+ years of experience in. relevant field, preferably space and satellite manufacturing, systems engineering, or design of electrical hardware.
• Proven experience leading large-scale space vehicle I&T campaigns, including avionics, power systems, and harness wiring.
• Expertise in developing integration and test plans with associated procedures.
• Strong ability to troubleshoot and resolve anomalies/non-conformances during integration and testing.
• Hands-on experience with environmental test campaigns (e.g., TVAC, shock, vibration, EMI/EMC, acoustics).
• Proficiency in Python scripting for test automation and diagnostics.
• Familiarity with test equipment for testing radio and bus electronics
• Experience working with classified systems, including performing keying operations.
• Demonstrated experience utilizing MES/ERP/MRP systems for tracking and managing integration tasks.
• Active security clearance or ability to obtain a security clearance

PREFERRED QUALIFICATIONS

• Background in testing and integrating electro-optical (EO) and infrared (IR) payloads or instruments.
• Familiarity with integrating space vehicles and payloads at launch sites, including pre-launch checkouts and troubleshooting.
• Ability to use CAD tools for reviewing or assisting with design modifications related to integration processes.
• Strong understanding of industry standards for shock, vibration, acoustics, TVAC, and EMI/EMC testing.
• Advanced experience with handling secure systems and classified operations beyond baseline keying activities.
• Familiarity with scaling integration and test processes for companies that build multiple satellites at once
• History of leading cross-functional engineering teams across hardware, software, thermal, mechanical, and structural disciplines.
• Previous involvement in the preparation and integration of satellites for launch and mission finalization.
• Advanced ability to develop or extensively modify Python test scripts for automation and diagnostics.
• Experience working in fast-paced aerospace companies or startups, showcasing adaptability and innovative problem-solving skills.

ABOUT THE JOB

Anduril's Manufacturing Engineering is seeking a Senior Manufacturing Tooling Engineer to join our team in Ohio. The Manufacturing Engineering department develops and implements robust manufacturing processes and tooling solutions to ensure Anduril's defense products are produced efficiently, reliably, and at scale at Anduril.

As Manufacturing Tooling Engineer, you will design, develop, and maintain innovative tooling systems that enhance our manufacturing capabilities and production efficiency. The right person for this role has strong mechanical design skills, expertise in CAD software, experience with tool fabrication processes, and knowledge of manufacturing systems integration. If you are someone who thrives in a fast-paced environment, enjoys solving complex tooling challenges, and is passionate about supporting cutting-edge defense technology manufacturing with creative tooling solutions then this role is for you.

This role will be based temporarily at Santa Ana, CA for a 3 month training period before transitioning to Asheville, OH.

WHAT YOU’LL DO

• Build things that build things
• Design and develop custom tooling, fixtures, and jigs to support manufacturing operations across multiple product lines
• Design integrated end of arm tooling for manufacturing operations that demand high quality and repeatability
• Create detailed technical drawings, 3D models, and specifications for tool fabrication using advanced CAD software
• Troubleshoot and resolve tooling-related issues in production environments to minimize downtime
• Collaborate with cross-functional teams including design engineers, manufacturing engineers, and production staff to integrate tooling solutions with manufacturing systems
• Conduct failure analysis on tooling and implement design improvements to enhance performance and durability. Develop and release PM procedures.
• Manage tooling budgets, vendor relationships, and outside fabrication of specialized tooling
• Support continuous improvement initiatives aimed at reducing costs and improving manufacturing throughput
• Ensure all tooling designs comply with safety standards and regulatory requirements

REQUIRED QUALIFICATIONS 

• Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or related technical field
• 8+ years of experience in manufacturing tooling design and implementation
• Expert capability with (at least one) 3D CAD software (NX, SolidWorks, Inventor, or CATIA)
• Demonstrated experience with tooling design for precision manufacturing processes
• Knowledge of machining processes, materials properties, and manufacturing methods
• Expert in GD&T (Geometric Dimensioning and Tolerancing)
• Currently possesses and is able to maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS 

• Experience in defense, aerospace, or other high-reliability manufacturing environments
• Knowledge of automation systems and integration with tooling solutions
• Experience with tool lifecycle management and maintenance planning
• Familiarity with lean manufacturing principles and Six Sigma methodologies
• Background in rapid prototyping and iterative design

ABOUT THE TEAM

Anduril’s Manufacturing Team is seeking a Senior Industrial Engineer to join our team. The role will support the development of simulation and optimization models to predict the behavior of manufacturing processes to drive real world adaptations. Executing on this responsibility will entail active collaboration with other Anduril teams, including but not limited to Supply Chain, Engineering, Quality, and Business Operations. The Manufacturing Team is responsible for rapidly iterating and building cutting-edge defense hardware, including static equipment, moving ground equipment, sensors, undersea, and flight vehicles, and scaling these products in our new 5M sq ft manufacturing facility, Arsenal-1.

ABOUT THE ROLE

The right person for this role can demonstrate holistic ownership on solving operational challenges with creative solutions in a fast-paced, resource-limited environment. This person will be flexible to change and ambiguity in their working environment, while working to ensure products are built and shipped on-time under stringent quality standards. If you are someone who thrives as the connective tissue among operational stakeholders to bring a production team forward, then this role is for you.

This role will be based temporarily at Santa Ana, CA for a 3 month training period before transitioning to Asheville, OH.

WHAT YOU'LL DO

• Capture the current process including all physical constraints, business rules and detailed decision logic into a 3D simulation-based virtual factory to serve as process and operational knowledge base
• Create feasible results, plans and schedules for shop floor, warehouse, factory & supply chain execution in all the relevant time ranges by ensuring that all scheduled operations are resource capacity, material, and timeline feasible
• Maintain an adaptive, data generated and driven virtual factory to always retain a “current status” digital reference model for determining future performance of the factory/supply chain whenever required for different transformation projects and investment decisions
• Own the design of new production lines and work station layouts, both for low rate and full-rate production, leveraging a data-driven approach
• Proactively identify high variation processes, imbalances and bottlenecks caused by line layout, equipment constraints, staffing shortages, and other production inputs; flag constraints with the appropriate owners across Manufacturing, Supply Chain, Engineering, and Quality and drive to resolution
• Translate and drive action from metrics, KPIs, and reporting associated with monitoring production line health and efficiency, such as cycle time, throughput rate, capacity, utilization, and first pass yield
• Produce and maintain capacity plans, balanced line layouts, staffing allocations, and time standards for manufacturing work content
• Collaborate and drive operational improvements end-to-end for next-generation defense products as we scale in maturity and production rate
• Work across domains, from execution-based work to the strategic future state of a product or business line

REQUIRED QUALIFICATIONS

• 8+ years past experience in a fast-paced manufacturing environment
• Experience with Technomatix “Plant Sim” simulation software or equivalent DES (Promodel, FlexSim, Simio, etc,) OR basic knowledge in object-oriented computer programming (example languages: Python, R, C++, Java, etc.) OR working with large data sets with SQL or No-SQL
• Ability to read technical documentation such as facility drawings, assembly drawings, technical specifications and procedures for manufacturing processes for electronics, mechanical and electromechanical assembly, system tests, and/or structures work
• Ability to work in ambiguity
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Bachelor's degree in Manufacturing Engineering, Industrial Engineering, or related technical field
• Prior work designing and/or setting up new production lines or factories - from process mapping through to collaborating with infrastructure design partners and detailed work station design
• Experience with Lean Manufacturing and/or Continuous Improvement and Six Sigma principles in action
• Experience interacting with data via data visualization applications or SQL queries
• Ability to completely own a value chain from start to finish, measuring each step of the process, creating actionable tasks that culminated in a significant and sustainable business improvement
• Prior experience with ERP, WMS and MES systems
• Knowledge stochastic \ deterministic models when to apply them
• Proficient in handling large data sets, including filtering, identifying trends, and graphical representation.
• Candidate should have knowledge of design engineering and manufacturing engineering processes including:
• 3D CAD design/modeling of parts and assemblies
• 3D factory layout
• Manufacturing process planning of fabricated parts, and complex discrete assembly process
• Manufacturing simulation of assembly processes, human ergonomics, and discrete event simulation
• Strong manufacturing data analytics and statistical analysis background with proficiency in statistical process control

ABOUT THE ROLE

Anduril’s Space Manufacturing team is seeking a Staff Manufacturing Engineer to join our team. The Space Manufacturing team is responsible for assembly, integration, and test of ground support equipment, PCBA, unit-level, and integrated systems that are vital for our aerospace and defense operations. Your expertise will help ensure that our products meet the highest standards of quality and reliability at Anduril.

As a Staff Manufacturing Engineer on our Space team, you will be a technical leader responsible for owning the manufacturing strategy and execution for complex spacecraft hardware. Your responsibilities the entire manufacturing value-chain, including Design for Manufacturability, advanced manufacturing process development, tooling design & selection, supplier technical management, quality system implementation, and comprehensive work documentation. You will lead a cross-functional initiatives, mentor junior engineers, and drive manufacturing excellence across PCBA, box-level electronics, electro-optical instruments, and integrated spacecraft systems. 

The ideal candidate demonstrates proven leadership in solving complex technical challenges with innovative, practical solutions in fast-paced, resource-constrained environments. You have successfully scaled manufacturing processes from prototype through production and have a track record of delivering high-reliability hardware on aggressive timelines.

WHAT YOU’LL DO

• Lead the development, documentation, and continuous improvement of manufacturing processes for PCBAs, box-level assemblies, electro-optical instruments, and integrated spacecraft systems, ensuring compliance with space-grade standards (IPC-610/620 Class 3, NASA-STD-8739 series)
• Drive Design for Manufacturability (DFM/DFA) initiatives from concept through production, partnering with design engineers to optimize producibility, yield, and cost while providing hands-on technical leadership to manufacturing technicians
• Own quality assurance for assigned manufacturing processes, lead root cause analyses (RCA) and corrective actions for non-conformances, and proactively mitigate risks through PFMEA, process validation, and quality planning
• Specify, qualify, and deploy advanced assembly tools, fixtures, test equipment, and automation solutions, including custom tooling design using CAD/3D modeling capabilities
• Implement and optimize Manufacturing Execution Systems (MES), ERP/MRP workflows, and digital manufacturing tools to enhance traceability, efficiency, and data-driven decision-making
• Establish and manage technical relationships with suppliers and contract manufacturers, conducting assessments, audits, and qualification activities while driving quality improvements and manufacturability enhancements
• Lead or participate in design reviews (PDR, CDR), manufacturing readiness reviews (MRR), and production readiness reviews (PRR) for flight hardware programs
• Collaborate across engineering disciplines (systems, electrical, mechanical, optical, test, quality) and communicate effectively with program management, supply chain, and executive leadership on manufacturing status, risks, and mitigation strategies
• Analyze production data and lead scaling efforts from low-rate to high-rate production, implementing continuous improvement programs (Lean, Six Sigma) to optimize throughput, reduce cycle times, and enhance product reliability while reducing costs
• Define manufacturing strategy for spacecraft product lines, mentor and develop junior engineers and technicians, and represent Manufacturing Engineering in cross-functional leadership forums and strategic planning session

REQUIRED QUALIFICATIONS 

• 12+ years of manufacturing engineering experience in aerospace, space systems, aviation, defense, or other high-reliability industries, with a proven track record leading complex manufacturing programs from development through production
• Bachelor's degree in Electrical Engineering, Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, or related technical discipline required
• Deep knowledge of aerospace and high-reliability electronics standards, including IPC-610/620 Class 3, IPC J-STD-001 Space Addendum, and NASA-STD-8739 series (soldering, wire harness, conformal coating)
• Expert-level understanding of PCBA manufacturing processes (SMT, through-hole, conformal coating, potting, component selection/screening) and strong technical knowledge of box-level assembly (cabling, harnessing, mechanical integration, thermal management, EMI/EMC)
• Hands-on experience implementing and optimizing Manufacturing Execution Systems (MES), ERP/MRP systems (SAP, Oracle, Odoo, Aligni), digital work instructions, and manufacturing process controls (SPC, Lean, Six Sigma)
• Demonstrated expertise in root cause analysis (8D, 5-Why, Fishbone, PFMEA), driving corrective/preventive actions (CAPA), and developing/executing process validation, first article inspection (FAI), and manufacturing qualification plans
• Ability to influence design for manufacturability and collaborate with electrical, mechanical, and systems design teams, with experience designing or specifying custom tooling, fixtures, and test equipment for complex assemblies
• Strong technical communication skills with ability to present to cross-functional teams and executive leadership, and proven ability to lead cross-functional initiatives across engineering, quality, supply chain, and operations
• Experience mentoring and developing junior engineers and technicians
• Proven success in fast-paced, startup, or rapid development environments while maintaining meticulous attention to detail and quality, with a hands-on mindset and willingness to work directly on the manufacturing floor alongside technicians
• Must be eligible to obtain and maintain a U.S. Top Secret security clearance

PREFERRED QUALIFICATIONS 

• Master's degree or equivalent advanced experience
• Direct experience manufacturing satellites, spacecraft, or space-based instruments (flight hardware), including spacecraft environmental testing (TVAC, vibration, shock, acoustics) and launch site integration support
• Familiarity with space-grade materials, processes, and workmanship standards such as NASA-STD-8739 series, ECSS standards, and IPC Space Addendum requirements
• Harness and cable assembly design capability, including schematic reading/drawing using tools like Altium, AutoCAD Electrical, or similar design software
• Experience with electro-optical or infrared sensor assembly, including optical alignment, cleaning protocols, contamination control, and cleanroom manufacturing practices
• Knowledge of advanced manufacturing technologies including selective soldering, automated optical inspection (AOI), X-ray inspection, conformal coating systems, and additive manufacturing (3D printing) for tooling or flight hardware
• Proven track record scaling production from prototype/LRIP to high-rate production (tens to hundreds of units), with experience implementing automation or semi-automation solutions for electronics assembly
• Lean Manufacturing or Six Sigma certification (Green Belt, Black Belt) with demonstrated project results and continuous improvement achievements
• Experience managing technical relationships with PCBA suppliers, cable/harness vendors, and contract manufacturers, including supplier audits, qualification activities, and AS9100
• Proficiency with CAD/3D modeling software (NX Design, SolidWorks, CREO, Fusion 360) and scripting tools (Python, MATLAB) for tooling design, DFM reviews, and data analysis
• Experience leading multi-disciplinary manufacturing programs with P&L or budget authority and recognized subject matter expertise in spacecraft manufacturing or high-reliability electronics
• Active Top Secret or TS/SCI clearance is a significant plus

ABOUT THE TEAM

Our Manufacturing Team is dedicated to rapidly iterating and building cutting-edge drone hardware for operational and testing applications. Our responsibilities span the entire manufacturing value-chain—from design for manufacturability, tooling design and selection, process creation and optimization, to quality planning and comprehensive work documentation.

ABOUT THE JOB

We are looking for a Manufacturing Specialist to join our rapidly growing team in Santa Ana, CA. In this role, you will be responsible for the assembly, repair, and testing of advanced drone systems while supporting new product introductions and process improvements. You will work closely with manufacturing and support engineers, draft and update technical documentation, and build fixtures to ensure the highest quality and reliability of our drone hardware. This will require expertise in mechanical troubleshooting, precision machining, blueprint reading, and hands-on maintenance and repair. If you are someone who thrives in a dynamic, fast-paced environment, with strong communication skills and a passion for continuous improvement, then this role is for you.

WHAT YOU’LL DO

• Collaborate with manufacturing and support engineers on production processes and new product introductions
• Execute repair and maintenance tasks for drones and assemble fixtures according to quality standards
• Conduct rigorous testing and qualification validations while driving process improvements
• Draft, write, and update procedures for drone manufacturing and repair
• Design and build tooling and fixtures to support new testing requirements
• Travel up to 20% for offsite test support and project requirements

REQUIRED QUALIFICATIONS

• Proven experience in high volume manufacturing and assembly within aerospace, military, or other high-reliability industries.
• 5 years of strong mechanical troubleshooting and repair skills, with experience in maintaining and upgrading production processes.
• Excellent blueprint reading, technical documentation, and test procedure development skills.
• Ability to work effectively in a fast-paced, dynamic environment while maintaining meticulous attention to detail.
• Must be a U.S. Person due to required access to U.S. export controlled information or facilities

PREFERRED QUALIFICATIONS

• Prior experience with drone systems or related unmanned aerial vehicles (UAVs).
• Demonstrated capability to train new hires or lead small teams in a manufacturing environment.
• Familiarity with lean manufacturing methodologies (5S, TPM) and process improvement strategies.
• Experience in drafting and revising standard operating procedures for technical processes.

ABOUT THE TEAM:

Anduril’s Missiles Manufacturing team is seeking a Manufacturing Engineer, Missiles to lead the development of manufacturing processes for our advanced defense products. This team is responsible for rapidly iterating and producing cutting-edge technology for advanced missiles.

Missiles Overview
https://www.anduril.com/barracuda

ABOUT THE ROLE:

As a Manufacturing Engineer, Missiles you will play a key role in shaping the manufacturing design for Anduril’s Missile division. Your core responsibilities include ensuring the highest production quality and supporting the development and implementation of new products for several program designs. The role encompasses the entire manufacturing value chain, including Design for Manufacturability, tool design and selection, process creation and optimization, vendor sourcing and collaboration, quality planning, and documentation for hardware production.

WHAT YOU’LL DO:

• Execute the manufacturing of a certain product or set of products, from initial prototyping through large full-scale production.
• Work with design engineers during the development process to drive design for manufacturing best practices into the design effort, and help facilitate the transition from design to prototype to rate production.
• Own documentation required for successfully manufacturing product group hardware at scale, such as MBOM’s, work instructions & requirements, etc.
• Advise on quality management and business application programs as they pertain to manufacturing within your area.
• Collaborate with internal customers and manufacturing planning teams to define capacity planning actions to meet customer needs and expectations.
• Develop production and test methodologies and implement best practices to enable scaling production capabilities for larger, more complex products.
• Travel to suppliers and partner sites to do initial sourcing work, solve ongoing production issues, and implement process procedures as required.

REQUIRED QUALIFICATIONS:

• Degree in a technical field such as engineering, math, or a hard science.
• 3+ years in manufacturing or similar prototyping position.
• An attitude of world-class mission assurance, quality, attention to detail, and dedication.
• A genuine interest in manufacturing and thirst for learning.
• Demonstrated ability to creatively deliver hardware in a resource-constrained environment.
• Personal experience physically manufacturing hardware via any means (machining, fabrication, soldering, assembly, etc.). Work on personal or extracurricular projects is a plus.
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Harness & PCBA fabrication experience including prior work with or setup/modification/monitoring SMT processes.
• Hands-on experience with R/C and/or autonomous flight vehicles, flight controllers, or other related control systems.
• Current active U.S. Secret security clearance

ABOUT THE TEAM 

Anduril’s Manufacturing Development team is seeking a Senior Manufacturing Engineer to join our team. The team defines the ‘What’, ‘When’, ‘Why’ and ‘How’ for manufacturing, from advanced manufacturing engineering to NPI to manufacturing operations.

ABOUT THE JOB 

This role includes championing Design for Manufacturing (DFM, DFA, DFx), reviewing and consulting on manufacturing plans for complex systems, and supporting manufacturing development on strategic programs. If you are excited to distill Anduril’s vision for production and the manufacturing lifecycle into actionable initiatives and deploy them across manufacturing teams and sites, this role is for you. 

WHAT YOU’LL DO 

• Define, lead and manage manufacturing engineering and operations initiatives from ideation through targeted pilots and broad roll-out.
• Collaborate closely with engineers and technicians to deeply understand their pain points, needs, and the intricacies of their workflows.
• Champion best practices across global manufacturing engineering teams. Define and share what good looks like via lunch and learns, templates, etc.
• Facilitate early engagement with cross-functional teams including product design, supply chain, business line, configuration management, quality, and EHS.
• Own new business processes for manufacturing engineering and industrial engineering. Balance standardization with adaptability for scalable, high-impact solutions.
• Identify areas of improvement on programs and provide actionable recommendations. Provide guidance on feasibility and risk for new manufacturing projects
• Align manufacturing engineering milestones with integrated program schedule. 

REQUIRED QUALIFICATIONS 

• 3+ years of experience in manufacturing engineering, manufacturing operations, design engineering, digital manufacturing, program management, or engineering transformation. 
• 6+ years of experience overall in relevant domains. 
• Extensive experience collaborating with stakeholders to implement or improve products, tools, or manufacturing processes (especially involving product integration).
• Proven experience successfully transitioning new products and/or production systems from development to full-scale production. 
• Business impact mindset and a process thinker. 
• Must be a U.S. Person due to required access to U.S. export controlled information or facilities.

PREFERRED QUALIFICATIONS 

• 8 – 10+ years experience in relevant domains.
• Experience leading organizational change.
• Experience from engineering to production with deep knowledge of development, co-design, and engineering phases of product lifecycle. 

ABOUT THE ROLE

Anduril’s Space Manufacturing team is seeking a Senior Manufacturing Engineer to join our team. The Space Manufacturing team is responsible for assembly, integration, and test of ground support equipment, PCBA, unit-level, and integrated systems that are vital for our aerospace and defense operations. Your expertise will help ensure that our products meet the highest standards of quality and reliability at Anduril.

As a Senior Manufacturing Engineer on our Space team, you will be a technical leader responsible for owning the manufacturing strategy and execution for complex spacecraft hardware. Your responsibilities the entire manufacturing value-chain, including Design for Manufacturability, advanced manufacturing process development, tooling design & selection, supplier technical management, quality system implementation, and comprehensive work documentation. You will lead a cross-functional initiatives, mentor junior engineers, and drive manufacturing excellence across PCBA, box-level electronics, electro-optical instruments, and integrated spacecraft systems.

The ideal candidate demonstrates proven leadership in solving complex technical challenges with innovative, practical solutions in fast-paced, resource-constrained environments. You have successfully scaled manufacturing processes from prototype through production and have a track record of delivering high-reliability hardware on aggressive timelines.

WHAT YOU’LL DO

• Lead the development, documentation, and continuous improvement of manufacturing processes for PCBAs, box-level assemblies, electro-optical instruments, and integrated spacecraft systems, ensuring compliance with space-grade standards (IPC-610/620 Class 3, NASA-STD-8739 series)
• Drive Design for Manufacturability (DFM/DFA) initiatives from concept through production, partnering with design engineers to optimize producibility, yield, and cost while providing hands-on technical leadership to manufacturing technicians
• Own quality assurance for assigned manufacturing processes, lead root cause analyses (RCA) and corrective actions for non-conformances, and proactively mitigate risks through PFMEA, process validation, and quality planning
• Specify, qualify, and deploy advanced assembly tools, fixtures, test equipment, and automation solutions, including custom tooling design using CAD/3D modeling capabilities
• Implement and optimize Manufacturing Execution Systems (MES), ERP/MRP workflows, and digital manufacturing tools to enhance traceability, efficiency, and data-driven decision-making
• Establish and manage technical relationships with suppliers and contract manufacturers, conducting assessments, audits, and qualification activities while driving quality improvements and manufacturability enhancements
• Lead or participate in design reviews (PDR, CDR), manufacturing readiness reviews (MRR), and production readiness reviews (PRR) for flight hardware programs
• Collaborate across engineering disciplines (systems, electrical, mechanical, optical, test, quality) and communicate effectively with program management, supply chain, and executive leadership on manufacturing status, risks, and mitigation strategies
• Analyze production data and lead scaling efforts from low-rate to high-rate production, implementing continuous improvement programs (Lean, Six Sigma) to optimize throughput, reduce cycle times, and enhance product reliability while reducing costs
• Define manufacturing strategy for spacecraft product lines, mentor and develop junior engineers and technicians, and represent Manufacturing Engineering in cross-functional leadership forums and strategic planning session

REQUIRED QUALIFICATIONS 

• 8+ years of manufacturing engineering experience in aerospace, space systems, aviation, defense, or other high-reliability industries, with a proven track record leading complex manufacturing programs from development through production
• Bachelor's degree in Electrical Engineering, Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, or related technical discipline required. Master's degree or equivalent advanced experience preferred
• Deep knowledge of aerospace and high-reliability electronics standards, including IPC-610/620 Class 3, IPC J-STD-001 Space Addendum, and NASA-STD-8739 series (soldering, wire harness, conformal coating)
• Expert-level understanding of PCBA manufacturing processes (SMT, through-hole, conformal coating, potting, component selection/screening) and strong technical knowledge of box-level assembly (cabling, harnessing, mechanical integration, thermal management, EMI/EMC)
• Hands-on experience implementing and optimizing Manufacturing Execution Systems (MES), ERP/MRP systems (SAP, Oracle, Odoo, Aligni), digital work instructions, and manufacturing process controls (SPC, Lean, Six Sigma)
• Demonstrated expertise in root cause analysis (8D, 5-Why, Fishbone, PFMEA), driving corrective/preventive actions (CAPA), and developing/executing process validation, first article inspection (FAI), and manufacturing qualification plans
• Ability to influence design for manufacturability and collaborate with electrical, mechanical, and systems design teams, with experience designing or specifying custom tooling, fixtures, and test equipment for complex assemblies
• Strong technical communication skills with ability to present to cross-functional teams and executive leadership, and proven ability to lead cross-functional initiatives across engineering, quality, supply chain, and operations
• Proven success in fast-paced, startup, or rapid development environments while maintaining meticulous attention to detail and quality, with a hands-on mindset and willingness to work directly on the manufacturing floor alongside technicians
• Must be eligible to obtain and maintain a U.S. Top Secret security clearance

PREFERRED QUALIFICATIONS 

• Direct experience manufacturing satellites, spacecraft, or space-based instruments (flight hardware), including spacecraft environmental testing (TVAC, vibration, shock, acoustics) and launch site integration support
• Familiarity with space-grade materials, processes, and workmanship standards such as NASA-STD-8739 series, ECSS standards, and IPC Space Addendum requirements
• Harness and cable assembly design capability, including schematic reading/drawing using tools like Altium, AutoCAD Electrical, or similar design software
• Experience with electro-optical or infrared sensor assembly, including optical alignment, cleaning protocols, contamination control, and cleanroom manufacturing practices
• Knowledge of advanced manufacturing technologies including selective soldering, automated optical inspection (AOI), X-ray inspection, conformal coating systems, and additive manufacturing (3D printing) for tooling or flight hardware
• Proven track record scaling production from prototype/LRIP to high-rate production (tens to hundreds of units), with experience implementing automation or semi-automation solutions for electronics assembly
• Lean Manufacturing or Six Sigma certification (Green Belt, Black Belt) with demonstrated project results and continuous improvement achievements
• Experience managing technical relationships with PCBA suppliers, cable/harness vendors, and contract manufacturers, including supplier audits, qualification activities, and AS9100
• Proficiency with CAD/3D modeling software (NX Design, SolidWorks, CREO, Fusion 360) and scripting tools (Python, MATLAB) for tooling design, DFM reviews, and data analysis
• Experience leading multi-disciplinary manufacturing programs with P&L or budget authority and recognized subject matter expertise in spacecraft manufacturing or high-reliability electronics
• Active Top Secret or TS/SCI clearance is a significant plus

ABOUT THE TEAM:

We are looking for a proactive, detail-oriented Project Coordinator to join our Manufacturing Engineering team. The Manufacturing Team is responsible for rapidly iterating and building cutting-edge defense hardware, including static equipment, moving ground equipment, and flight vehicles. You will coordinate deployment and communication of new tools, processes, and capabilities across the department. You’ll be the glue that connects the product aligned teams to the automation team within manufacturing engineering. If you thrive in fast-paced, technical environments and excel at juggling multiple responsibilities, we want to hear from you. 

WHAT YOU'LL DO

Project Coordination

• Monitor project tasks, assign responsibilities, and track progress to ensure completion
• Identify and address issues, analyze risks, and coordinate to help the project stay on course
• Generate detailed Gantt chart schedules to ensure cross-functional alignment and on time delivery of Manufacturing Engineering deliverables
• Proactively identify potential schedule risks (e.g., supply chain delays for hardware, technical hurdles, resource conflicts, external dependencies)
• Ensure that the right people (engineers, specialists), equipment, and facilities are available when needed according to the schedule

Communication

• Facilitate communication among automation team and manufacturing engineering product aligned teams and stakeholders
• Manage and organize department communication channels, document storage and information share (SharePoint, Confluence, Box, Slack)
• Develop standardized documentation templates
• Develop presentation frameworks for department-wide meetings and executive reviews
• Distill meeting notes into actionable items, ensuring our teams remain honest and accountable

Engagement and Support

• Develop and execute strategies to engage manufacturing engineers across all Anduril sites
• Manage department-wide calendar and support meetings for department leadership as needed
• Coordinate events for professional development and employee appreciation for the department

REQUIRED QUALIFICATIONS

• Minimum 1-2 years professional experience as a project or program coordinator
• Excellent communication skills and ability to collaborate cross-functionally
• A reliable self-starter, highly organized, resourceful, with attention to detail
• A team player who is highly collaborative with the ability to handle complex projects
• Must be a U.S. Person due to required access to U.S. export controlled information or facilities

PREFERRED QUALIFCATIONS

• Bachelor's degree in Electrical Engineering, Mechanical Engineering, Manufacturing Engineering, or a related technical field.
• Knowledge and/or experience of Confluence/JIRA, SharePoint and Airtable are a plus
• Experience working in a manufacturing environment

ABOUT THE JOB

Anduril's Manufacturing Engineering is seeking a Senior Manufacturing Equipment Engineer to join our team. The Manufacturing Engineering department develops and implements robust manufacturing processes and tooling solutions to ensure Anduril's defense products are produced efficiently, reliably, and at scale at Anduril.

As a Senior Manufacturing Equipment Engineer, you will support continuous operations and enable world class manufacturing of cutting edge defense products. As a Sustaining Equipment Engineer, you will drive Overall Equipment Efficiency (OEE) by continuously enhancing critical systems, including PLC/HMI logic, robotics, mechanical/electrical subsystems, and conveyance infrastructure. You will also play a key role in cross-functional teams, developing, introducing, and ensuring the long-term sustainment of new models, products, and materials. The right person for the role has a proven track record of significantly improving Overall Equipment Efficiency through sophisticated automation enhancements and successful collaboration on new product development.. If you are someone who has an analytical mindset, a relentless drive for continuous improvement in OEE, and excellent collaboration skills to work effectively across teams, then this role is for you.

This role will be based temporarily at Santa Ana, CA for a 3 month training period before transitioning to Asheville, OH. 

WHAT YOU’LL DO

• Analyze and optimize production equipment to ensure safety while maximizing Overall Equipment Effectiveness (OEE) in cost effective means while driving to achieve world-class quality levels
• Champion continuous improvement projects to maximize yield, cycle time, and availability of equipment. Report metrics to upper management
• Work hand in hand with process engineering and maintenance teams to resolve equipment issues, improve equipment reliability, and provide technical guidance
• Support operations to aggressively ramp newly launched products to full-scale production
• Develop Scada system to monitor, gather, and process real-time production data
• Perform in-depth root cause analysis for equipment failures and implement robust corrective and preventive actions to enhance system reliability and uptime.
• Collaborate with cross-functional teams including design engineering, quality, and production to ensure production related issues are rapidly resolved

REQUIRED QUALIFICATIONS

• Bachelor's degree in Electrical Engineering, Mechanical Engineering, Manufacturing Engineering, or a related technical field.
• 8+ years of experience in a manufacturing environment, specifically focused on equipment engineering, automation, or reliability.
• Demonstrated expertise in programming and troubleshooting PLCs (e.g., Allen-Bradley, Siemens), HMIs, and industrial automation systems.
• Strong understanding of robotics, motion control systems, and mechanical/electrical subsystems in a production setting.
• Proven ability to lead and execute continuous improvement initiatives (e.g., Lean, Six Sigma) resulting in measurable OEE gains.
• Strong troubleshooting and problem-solving skills with ability to implement effective solutions quickly
• Excellent problem-solving abilities, analytical skills, and attention to detail.
• Experience working in a fast-paced, high-volume manufacturing environment.
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Experience with Vision Systems for automated inspection and guidance.
• Proficiency in CAD software (e.g., SolidWorks, AutoCAD) for equipment design and layout.
• Lean Six Sigma certification (Green Belt or Black Belt).
• Prior experience in the defense, aerospace, or med-tech industries.
• Currently possesses and is able to maintain an active U.S. Secret security clearance