Motional’s Pittsburgh office is located in the new Hazelwood Green development, a culmination of the city’s goal of restoring an economic driver to the neighborhood in a thoughtful, inclusive, and sustainable way. With views along the Monongahela river, the Pittsburgh office is in the heart of this new state of the art development.

Mission Summary:

The SQE position is based at the Pittsburgh Technical Center, Pittsburgh PA, and reports to the Supplier Quality Manager based at the Las Vegas, Nevada Technical Center. Quarterly travel to Supplier manufacturing sites is anticipated (at a minimum). 

The SQE will be responsible for executing the Advanced Product Quality Planning (APQP) process with Suppliers selected for potential Generation 3 activities, in addition to pursuing continuous improvement and warranty reduction for the current Generation 2 build. The role involves conducting Program Reviews against established program milestones and escalating issues as necessary. The individual must ensure the supply base adheres to Motional standards, that quality and manufacturing processes are enabled, and that non-conformances are identified and prevented from proceeding to subsequent manufacturing sites. Prompt reaction to and cross-functional resolution of known non-conformances is required.

What you’ll do:

• Ensure supplier adherence to APQP processes, including product Production Part Approval Process (PPAP) submission and approval requirements.
• Review and approve supplier quality plans (Control Plans, Process Failure Mode and Effects Analysis [PFMEA]) for new components and assemblies essential for vehicle launch.
• Conduct reviews of supplier manufacturing processes and quality management systems.
• Facilitate root cause analysis and the implementation of corrective actions for supplier quality issues.
• Execute on-site supplier visits to conduct root cause analysis and verify the effectiveness of corrective actions related to supplier quality issues.
• Implement and monitor supplier part qualification and certification processes (PPAP, Run at Rate).
• Enhance the quality performance of suppliers through on-site workshops, providing technical assistance in developing robust quality systems, or offering other necessary technical support.
• Provide technical assistance during supplier launch, change-over, and ongoing production activities.
  
  

What We’re Looking For:

• A Bachelor's degree is mandatory. A degree in Engineering (Mechanical, Industrial, Electrical, Manufacturing, Welding, Plastics, Materials, Chemical preferred) or an equivalent Technical Degree such as Applied Mathematics, Chemistry, or Physics is acceptable.
• A minimum of 2 years of experience in quality, engineering, and/or manufacturing is required.
• Proficiency in reading and interpreting engineering drawings, performing part measurements, and understanding gage design and function.
• Demonstrated knowledge of Geometric Dimensioning and Tolerancing (GD&T).
• Proven knowledge of manufacturing and assembly plant processes, procedures, tooling, equipment, and facilities.
• Demonstrated knowledge of probability, statistical quality control, and design of experiments.
• Proven ability to investigate complex quality problems and apply sound technical judgment to develop effective solutions.
• Demonstrated ability to concurrently manage multiple projects and lead diverse cross-functional teams.
• High level of interpersonal skills necessary to work both independently and collaboratively.
• Strong oral, written, and presentation communication skills.
• Ability to travel up to 75% (domestic and international).
• This position necessitates the ability to legally operate a motor vehicle on a regular basis.
  
  

Bonus Points:

• One or more years of Original Equipment Manufacturer (OEM) or Tier 1 experience within automotive quality, manufacturing, or engineering functions, including demonstrated experience and capability in any of the following areas:.
• Statistical Problem Solving (e.g., Red X, Six Sigma, DMAIC).
• Product Engineering.
• Lean Manufacturing and/or Manufacturing Quality.
• Manufacturing, Process, and/or Tool Engineering.
• Quality Systems Planning (APQP), including PPAP.

This role is based in our Pittsburgh office and requires in-office days each week.

Senior Vision AI Engineer 
(Cognitive Vision and Industrial AI)

Location: Mid-Atlantic Region
Company: Linque
Reports to: Head of Vision AI

About Proconex

Proconex is a trusted leader in industrial automation and process control solutions, proudly serving the industry for over 75 years. With a rich legacy of delivering high-performance systems and equipment to process industries—including oil & gas, chemicals, power, and life sciences—we are now entering an exciting new chapter.

We are  building on a solid foundation of over 10 years of successful deployments with our next generation of software products. Our software solutions are designed to empower industrial operators with operational analytics, enabling smarter, more efficient, and more reliable operations. This is a unique opportunity to be part of a growth-focused team that is taking proven technology to the next level.

About the Role

Linque is expanding its Vision AI and Cognitive Automation platform focused on applying real-time computer vision and AI to industrial, biopharmaceutical, and process manufacturing environments. We are seeking a Senior Vision AI Engineer to help lead the development, deployment, and customer-facing application of advanced vision AI solutions. This role sits at the intersection of deep technical execution, platform development, and real-world industrial use cases.

Key Responsibilities

• Design, develop, and deploy production-grade computer vision and machine learning models
• Build optimized end-to-end vision pipelines for real-time and near-real-time applications
• Translate complex industrial problems into scalable AI architecture
• Collaborate cross-functionally with product, engineering, and commercial teams
• Participate in technical customer discussions, pilots, and evaluations
• Support prototypes through pilot and production transitions
• Mentor junior engineers and contribute to technical best practices

Required Qualifications

• 5+ years’ experience in computer vision and machine learning
• Strong hands-on experience deploying AI systems in production
• Proficiency in Python and modern ML frameworks (e.g., PyTorch, TensorFlow, Keras)
• Deep knowledge of Video / Image processing tools (e.g. Mask R-CNN, ResNet, U-Net)
• Knowledge of object and anomaly detection (Autoencoders, FastFlow, Transformers)
• Tunning experience for CNNs and Vision Models (e.g., MLFlow, NVIDIA TAO, MMD, MMS)
• Mastery of model interchange and GPU acceleration (e.g. ONNX, CUDA, cuDNN)
• Experience working with image/video pipelines, container orchestration (local and cloud)
• Understanding of the full ML / AI lifecycle

Preferred Qualifications

• Experience with real-time vision systems
• Background in industrial automation or regulated environments
• Experience with edge or cloud deployment
• Ability to communicate complex technical topics clearly

Why Join Linque

• Apply AI to real industrial problems with measurable impact
• Collaborate with experienced AI and industrial leaders
• Influence the evolution of next-generation Vision AI platforms
• Flexible, growth-oriented environment

Apply today to learn more about this exciting new opportunity at Proconex, the exclusive Emerson Impact Partner for the Mid-Atlantic region!

As a Civil Engineer at Atwell, your role will be dynamic and multifaceted, including the opportunity to become a subject matter expert in residential, commercial, and/or industrial land development!

Job Description

• Site Plan Excellence: You'll be responsible for drafting preliminary and final site plans using AutoCAD Civil 3D, ensuring precision and adherence to industry standards.
• Data Analysis: Dive into project survey data to assess existing site conditions, considering various factors, including legal descriptions, ALTA surveys, easement documents, and condo documents.
• Comprehensive Reporting: Prepare a variety of reports, opinions, and recommendations crucial for project direction. This may include hydrology/hydraulic studies, due diligence/site analysis reports, engineer's opinion of probable costs, project schedules, utility computations, detention/retention computations, storm sewer reports, local and state permit applications, stormwater reports, soils reports, earthwork volume calculations, StormCAD reports, WaterCAD reports, and preliminary grading.
• Construction Support: Offer valuable construction-related services, such as permit applications, cut sheets, quantity estimates, and transmittals. Organize site plans, construction plans, and construction documents under the guidance of Senior staff.
• Engineering Software Mastery: Utilize AutoCAD Civil 3D and related engineering software packages to complete assignments efficiently, ensuring they align with established standards.
• Effective Communication: Demonstrate strong written and verbal communication skills when collaborating with current staff members, ensuring seamless project coordination.

Qualifications

• Bachelor’s Degree in Civil Engineering from an Accredited University
• 2+ years of experience
• EIT strongly preferred
• AutoCAD Civil 3D, WaterCAD, StormCAD, and SewerCAD preferred

Disclaimer 

While AI tools may support your application process, this role is built on human talent. Your judgment, experience, and character matter most, so we encourage you to showcase what makes you uniquely you.

Atwell does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any Atwell employee. Resumes from approved vendors must be specifically requested by Atwell and approved by the Atwell Talent Acquisition Team.

#LI-RD1

Key Responsibilities

• Support customers in the design, optimization, and management of electrical infrastructures
• Analyze and improve network performance, reliability, and energy efficiency
• Perform cable design, network sizing, and system modeling
• Conduct network simulations and short-circuit studies
• Provide both technical and cost-related assessments of electrical systems
• Deliver actionable recommendations for infrastructure optimization and long-term sustainability
• Collaborate with cross-functional teams to ensure successful implementation of solutions

Required Qualifications

• Proven experience with applied electrical networks in complex environments such as:
• Data centers
• Semiconductor fabrication facilities
• Airports
• Metro systems
• Industrial sites
• Strong expertise in:
• Cable design
• Network sizing and modeling
• Network simulation
• Short-circuit analysis
• Ability to evaluate both technical performance and financial implications of infrastructure decisions
• Strong customer-facing skills with the ability to explain complex technical topics clearly
• Proficiency with Matlab / Simulink

Preferred Skills

• Experience in energy optimization and sustainability initiatives
• Background in power systems engineering or electrical infrastructure consulting
• Familiarity with industry standards and grid compliance requirements

Salary Range: $90,000-100,000

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience 

Aurora hires talented people with diverse backgrounds who are ready to help build a transportation ecosystem that will make our roads safer, get crucial goods where they need to go, and make mobility more efficient and accessible for all. We’re searching for a Quality Engineer II. The primary objective of this role is to ensure quality in manufacturing and supply chain in support of the development and production of the Aurora Driver and delivering the benefits of self-driving technology safely, quickly, and broadly. A successful candidate is data-driven, excels at complex problem solving, has a strong quality and product focused mindset, and can lead cross-functional teams to identify and eliminate quality problems, issues and risks.

In this role, you will

• Lead the supplier partner and/or CM industrialization process from design through production ramp-up.
• Lead the APQP process and manage PPAP through the start of production with supplier partners and/or CM as well as Aurora’s OEM customers.
• Lead the development of pFMEA, Control Plan, capability analysis, MSAs, DOEs, etc. in alignment with automotive APQP and PPAP requirements and activities.
• Support the development of dFMEAs, PFD, and Work Instructions at supplier partner and/or CM by closely working with Aurora design and NPI teams. 
• Support supplier partner and/or CM with tooling, equipment, and process qualifications by closely working with Aurora design and NPI teams.
• Assess supplier partner and/or CM readiness for each build phase and help manage production risks.
• Lead root cause and corrective action efforts for any supplier partner and/or CM related quality issues from production or field returns.
• Monitor and report supplier partner and/or CM quality metrics both internally and externally to Aurora’s OEM customers to ensure continuous improvement.
• Uses lean tools, statistical techniques and analytical methods to achieve effective problem solving, root cause discovery and corrective action (8D Problem Solving, 5-Why) both internally and externally.
• Closely collaborate with other cross-functional teams throughout the industrialization phases to ensure products meet industry and Aurora’s quality standard.
• Train suppliers on Aurora quality system, process, and review part quality documentations (e.g. PSW elements)
• Support the development and continuous improvement of Aurora quality management systems with a focus on APQP and supplier partner/CM management.
• Travel domestically and internationally ~25%  to supplier partner and/or CM sites to facilitate audits, industrialization activities and issue resolutions.

Required Qualifications

• Bachelor of Science in Electrical, Mechanical, Industrial Engineering, or related fields; or equivalent combination of education and experience.
• 5+ years in quality, supplier quality, or manufacturing - ideally in automotive, aerospace, robotics, or medical devices.
• Hands-on experience launching new products and improving quality systems.
• Strong experience with supplier audits, APQP, PPAP, and production ramp-ups. 
• Excellent analytical abilities, technical writing ability and comprehensive understanding of the quality toolbox (SPC, 8D root cause analysis, tolerancing, control and inspection standards, etc.).
• Familiar with key quality tools: FMEAs, control plans, SPC, MSA, and capability studies.
• Understanding of manufacturing processes for PCBA, electromechanical assemblies, injection molding, casting, and stamping.
• Capable of interpreting engineering drawings and using GD&T
• Knowledge of ISO 9001, IATF 16949 quality systems
• Experience with Google Sheets, Docs, Slides and Gmail.
• Excellent written and verbal communication of status and results, including generating formal reports or presentations for customers.
• Ability to work in a fast-paced team environment.

Desirable Qualifications 

• Certifications like CQE, Six Sigma Green Belt, or Quality Auditor
• Experienced in ISO 26262.
• Proficient in Minitab or other statistical software capabilities.
• Experience with Jira.

The base salary range for this position is $112,000-$180,000 per year. Aurora’s pay ranges are determined by role, level, and location. Within the range, the successful candidate’s starting base pay will be determined based on factors including job-related skills, experience, qualifications, relevant education or training, and market conditions. These ranges may be modified in the future. The successful candidate will also be eligible for an annual bonus, equity compensation, and benefits.

#LI-JH1

#Mid-Senior 

APPLICATIONS ENGINEER - FLOW CONTROL

Overview

We are seeking a talented and motivated Applications Engineer specializing in Flow Control to join our dynamic team in Royersford, PA. In this role, you will play a crucial part in providing technical support and solutions for our flow control products. If you have a passion for engineering and a knack for problem-solving, we want to hear from you!

Responsibilities

• Provide technical support to customers and sales teams regarding flow control products.
• Develop and deliver product demonstrations and training sessions.
• Collaborate with engineering and product management to enhance product offerings.
• Analyze customer requirements and propose tailored solutions.
• Assist in the preparation of technical documentation and marketing materials.
• Participate in product testing and validation processes.
• Stay updated on industry trends and competitor products.

Qualifications

• Bachelor’s degree in Engineering or a related field.
• 2+ years of experience in applications engineering or a similar role.
• Strong understanding of flow control principles and technologies.
• Excellent communication and interpersonal skills.
• Ability to work collaboratively in a team-oriented environment.
• Proficiency in technical software and tools relevant to flow control applications.
• Strong analytical and problem-solving skills.

Are you a skilled sales person with a passion for building lasting relationships and providing top-notch customer support? Join our energy and industrial sales team and work closely with our customers to drive their growth and satisfaction. Apply now to take on this exciting opportunity and make a significant impact!

Job Summary

This entry level professional will contribute to analyzing production processes and determining rates and efficiency improvements. In addition, this individual will support the creation and maintenance of master data, standard costs, routers, and other manufacturing data. Further, the Industrial Engineer I will support manufacturing improvements. The Industrial Engineer I is the first level within the Industrial Engineer career path.

Key Responsibilities

• Contribute to strategic improvement projects, in a multi-disciplinary organization, to obtain cost reductions and improved efficiencies, to achieve profitability targets
• Identify process gaps through direction from Manufacturing Operations Manager
• Estimate production costs for new products, product changes, and development projects
• Perform time studies and efficiency analyses on machines and processes
• Maintain Baan router and work center product master data and standard cost data
• Maintain processes for life-cycle cost management of projects/programs from inception to completion with periodic review to identify causes for variance
• Identify products and/or processes where cost reductions might be realized
• Participate in the monthly Manufacturing and Development Engineering meetings as required
• Follow necessary PPE requirements, appropriate ISO specifications and company procedures
• Maintain project schedule using project management tools and methodology
• Work with Engineering and Production to manage changes to RBU produced products
• Analyze production equipment and type in support of meeting product demand, cost, and quality goals
• Other duties as assigned by one’s Manager

Qualifications

• Bachelor’s Degree in Industrial Engineering, Mechanical Engineering, Electrical Engineering, or related subject
• Excellent analytical skills
• Demonstrates problem solving skills
• General computer knowledge, and efficient in Microsoft Word, Excel, PowerPoint, and Project
• Ability to communicate and work effectively with others
• Knowledge of Project Management tools and techniques
• Knowledge of SAP or other enterprise-wide management software is desirable
• Knowledge of corporate and industry standards

Essential Job Functions

• Must be able to travel by air
• Occasional overseas travel for extended periods as required
• Occasional Domestic Travel as required
• Must be able to sit for extended periods of time
• Must be able to communicate effectively in English
• Must be able to lift 25 lbs.
• Regular and on-time attendance.

Perks & Benefits

Phoenix Contact offers a generous benefits package that includes medical, dental, and vision coverage, 401k matching, and a generous time off package. There are also a wide variety of additional benefits available including 16 weeks fully paid maternity leave & 10 weeks fully paid paternity leave, life insurance, short & long-term disability, on-site gym access, health & wellbeing center, on-site café, walking trails, tuition assistance, and more!

#LI-AF1

About The Role

Antora Energy is seeking a Senior Manufacturing Operations Engineer to serve as our first on-site operations presence at a supplier facility in Pennsylvania. The supplier operates high temperature furnaces that process material that is then integrated into Antora's thermal energy storage systems.

Because this program is new, you will build the operational foundation from the ground up: writing SOPs, defining the end-to-end material flow, establishing quality criteria & tracking, and implementing preventative maintenance schedules. Once production begins, you will own day-to-day execution — coordinating across the supplier's operators, maintenance crews, engineering, quality, EH&S, and logistics teams to ensure Antora's material moves safely, on spec, and on time.

This is a high-autonomy role. You will be Antora's eyes, ears, and decision-maker on site, while staying tightly connected to the broader Operations team at our San Jose headquarters.

What You'll Do

• Production Standup: Develop and implement SOPs, control plans, work instructions, and preventative maintenance schedules for all furnace operations — from receiving raw material through final pack-out and shipping
• Day-to-day Oversight: Monitor and drive execution of furnace loading, thermal processing, unloading, and post-process inspection across the furnace fleet. Track cycle schedules, flag delays, and resolve bottlenecks
• Quality Assurance: Work with Antora’s Quality team to define and enforce incoming, in-process, and final inspection criteria. Assist with root cause analysis and corrective action when material is out of spec
• Supplier Coordination: Serve as Antora's primary on-site liaison with the supplier's operations, maintenance, engineering, controls, quality, EH&S, purchasing, and management teams. Ensure Antora's priorities are understood and acted on
• Safety & Compliance: Ensure all operations meet Antora's & supplier's EH&S standards and applicable regulations. Identify and escalate safety risks proactively
• Material Flow & Logistics: Oversee receiving, inventory management, fixture handling, and outbound shipping of finished material. Maintain accurate records and traceability, including establishing material planning and inventory tracking processes, including evaluation of MRP systems
• Continuous Improvement: Track yield, throughput, and cost metrics. Identify recurring issues and drive process improvements in collaboration with the supplier and Antora's San Jose operations team
• Communication & Reporting: Provide regular production status updates to Antora leadership. Escalate risks and decisions that require HQ input in a timely manner

What We're Looking For

• B.S. or higher in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Materials Science, or a related field.
• 5+ years of experience in manufacturing operations, process engineering, or production management in a heavy industrial or high-temperature processing environment.
• Demonstrated experience writing and implementing SOPs, control plans, and/or quality management documentation.
• Hands-on familiarity with furnace, kiln, or other thermal process operations.
• Track record of coordinating across multiple functional teams (operations, maintenance, quality, EH&S) to deliver production targets.
• Experience with root cause analysis and corrective/preventive action processes.
• Strong project management skills — ability to manage competing priorities and drive accountability in a matrixed or supplier-partner setting.
• Willingness to be based full-time on site in St. Mary's, PA and work in covered, unconditioned, outdoor environments throughout the year.

Bonus Qualifications 

• Experience standing up new production lines or launching operations at a new site (zero-to-one).
• Background in carbon, graphite, ceramics, or other high-temperature material processing.
• Familiarity with lean manufacturing, Six Sigma, or similar continuous improvement frameworks.
• Experience working as a customer representative embedded at a supplier or contract manufacturer.
• Exposure to thermal energy storage or adjacent energy technologies.
• Experience in startup or high-growth manufacturing environments

Work Location: Onsite in St Mary's, PA 

Salary Range:  $97,000 USD - $116,000 USD

Salary Basis:  Annual

Please note that the salary range listed above reflects Antora Energy's estimated pay for this position. The actual salary offered will be within the posted range and determined based on several factors including but not limited to a candidate's experiences, credentials and expertise, as they pertain to the position's requirements.

In addition to a competitive base salary, Antora Energy’s Total Rewards program includes equity compensation in the form of stock options, a premium health benefits package with life and disability insurance, a 401K plan with employer contributions, flexible spending accounts, and an industry leading paid-time-off policy that features flexible and inclusive holiday observance, as well as paid volunteer time off.

Job Summary

An embedded systems engineer is an individual contributor role responsible for designing, developing, and implementing real-time embedded software and firmware solutions. This role supports cross-functional engineering activities, contributes to technology research, and performs sustaining work on existing products. The engineer collaborates with global teams to ensure secure, reliable, and high-performance embedded platforms.

Key Responsibilities

• Design and implement embedded software in C/C++ for real-time systems
• Develop detailed design documentation and contribute to system requirement specifications
• Support system architecture activities and contribute to technology conceptualization
• Assist in identifying and mitigating security vulnerabilities within embedded applications
• Support threat modeling activities for embedded components
• Participate in R&D initiatives and assist in evaluating emerging technologies
• Troubleshoot, maintain, and enhance existing embedded products
• Collaborate with global and local engineering teams to align system development
• Participate in standards-based industry working groups when applicable
• Work independently and within multi-disciplinary teams to complete assignments
• Other duties as assigned.

Qualifications

• BS (MS/ME preferred) in Computer Science, Electrical Engineering or related field
• Knowledge / experience developing embedded systems for high reliability applications (Industrial, Automotive, Medical, Defense, etc.)
• Demonstrated ability to conceptualize and create innovative solutions
• Experience with industry best practices in embedded development and quality assurance
• Proven experience developing applications for embedded Linux in C/C++
• Experience with VHDL / Verilog for FPGA design
• Knowledge of web and cloud technologies
• Source level knowledge of Ethernet based and industrial communication protocols
• 3+ years’ experience leading new technology development and working within cross-functional groups to successfully bring products to market

Essential Job Functions

• Eligible to receive a US passport
• Ability to travel by air as required
• Ability to sit for extended periods and ride in a car for up to 6 hours
• Ability to communicate effectively in English (written & verbal)
• Ability to travel overseas for extended periods if required
• Regular and on-time attendance
• This is a hybrid position unless otherwise specified requiring 3 days in the office.

Perks & Benefits

Phoenix Contact offers a generous benefits package that includes medical, dental, and vision coverage, 401k matching, and a generous time off package. There are also a wide variety of additional benefits available including 16 weeks fully paid maternity leave & 10 weeks fully paid paternity leave, life insurance, short & long-term disability, on-site gym access, health & wellbeing center, on-site café, walking trails, tuition assistance, and more!

#LI-DZ1

Job Summary

The Solution Engineer/SE serve as strategic technical consultants and project leaders, supporting Automation Solutions sales, applied system development, and project initiatives across focused vertical markets. Operating with a high level of autonomy, SEs design, implement, and support advanced solutions that integrate Phoenix Contact’s complex technical products with third-party components to meet specific customer or industry segment needs. These specialists interpret and translate customer specifications into functional concepts, delivering tailored application solutions that address operational challenges and align with industry best practices. Industries served include oil and gas, water/wastewater treatment, building automation, data centers, transportation infrastructure, electric power, automotive, and network & security. Solution Engineers are strategically positioned to drive innovation, organizational agility, and long-term business value.

Responsibilities

• Develop an expert area of specialization (industry/technology) as directed by manager and attain related certifications
• Mentor and advise Associate Solution Engineers, Technical Service, Product Engineering, and Product Management on product performance in the field and suggest design changes to improve product performance and customer satisfaction
• Design training programs and training material to support complex control system projects
• Develop advanced system testing and troubleshooting processes utilizing spectrum analyzers, storage scopes, power monitors, volt meters, and other required test equipment
• Provide applied solution design and engineering support to the Control and Industry Solutions team
• Independently qualify and gather input for designs through functional specification review or by direct customer interaction
• Provide pre-sales technical support and develop a concept framework based on customer requirements and industry standards and practices
• Develop and implement test plans to validate proposed solutions
• Develop and serve as technical lead on ‘proof of concept’ or pilot applications
• Provide project management as required, and advise project team on technical issues throughout the project lifecycle
• Develop, implement, and provide on-site installation start-up support
• Perform application demonstrations together with Phoenix Contact sales engineer and/or PSE at potential customer sites
• Research and understand existing competitive and emerging products and technologies
• Document and internally communicate data supporting the development of new products to meet focus market/customer requirements
• Support the sales effort of Phoenix Contact’s complex technical products when positioned and sold as industry solutions at OEM, end-user, and system integrator focused accounts within primary and supported market segments
• Support Phoenix Contact field personnel and channel partners in technical aspects relating to the sale of systems and solutions
• Develop and conduct control solution presentations and technology seminars to targeted audiences
• Position Phoenix Contact as a technology leader through active involvement in industry related technical associations
• Develop and maintain an expert understanding of industrial networking and communication technologies. Specific expertise in Industrial Ethernet Protocols:  Profinet, Ethernet/IP, and Modbus TCP
• Develop and maintain an expert working knowledge on all Phoenix Contact industrial products with specialized emphasis on IEC 61131 programming, industrial ethernet (wired and wireless), and networked I/O
• Maintain knowledge proficiency through continued participation in industry trade events and conferences including active participation in presenting Phoenix Contact Case Studies, etc.
• Attendance and participation in accordance with corporate policies in local, national, and international meetings

Qualifications

• Minimum Associate’s Technical Degree + equivalent experience. Bachelor’s degree in engineering or technical focus preferred.
• Minimum of 4 years industrial automation experience
• Industry specific controls system design and programming experience
• Motivated self-starter with the ability to work autonomously and as part of a team
• Ability to set priorities and perform simultaneous tasks
• Ability to meet deadlines and adjust to changing priorities to meet business goals
• Excellent written and verbal communication skills
• Proficient computer skills (Word, Excel, PowerPoint)
• Effective interpersonal skills with comfort in delivering group presentations

Essential Job Functions

• 35% Travel Requirement (2% - 5% Overseas)
• Must be able to lift 60 pounds
• Must be able to sit and/or stand for extended periods of time (2-4 hours at a time)
• Must be able to work on a computer for extended periods of time (up to 4 hours at a time)
• Must be able to travel in vehicles (automobiles, trains, and planes) for up to 10 hours
• Must be able to communicate effectively in verbal and written English
• Must comply with company dress code guidelines
• Punctuality and attendance in accordance with company policies
• Timely reporting of expenses
• Regular and on-time attendance.
• This is a hybrid position requiring at least three days in the office, unless otherwise specified.

What’s in it for you?

Phoenix Contact offers a generous benefits package that includes medical, dental, and vision coverage, 401k matching, and a generous time off package. There are also a wide variety of additional benefits available including 16 weeks fully paid maternity leave & 10 weeks fully paid paternity leave, life insurance, short & long-term disability, assistance, and more!

#LI-RD1

The Role:

ElevateBio is seeking an Automation Engineer II to play a key role in owning the BaseCamp facilities controls and automation systems. This role develops support models to ensure reliable operations, manages vendor and software support contracts, and provides technical support for manufacturing, quality, and research automated systems. The Automation Engineer II supports capital projects and facility expansions, ensures new assets are integrated into the automation infrastructure, troubleshoots manufacturing equipment, and partners closely with Quality and Validation to ensure compliance and system readiness.

Success in this role requires strong system ownership, collaboration, and a customer focused mindset. The ideal candidate brings strong technical expertise in facility controls and infrastructure such as BMS, BAS, BacNet, and MTPS; automation systems including SCADA, PLCs, HMIs, and data historians; and regulatory requirements such as 21 CFR Part 11, Annex 11, and data integrity. A passion for learning, attention to detail, and hands on problem solving are essential. Robust, lean automation and data collection are critical to supporting ElevateBio’s strategy to rapidly launch next generation cell and gene therapies for patients.

 Here’s What You’ll Do:

• Manage control and automation systems projects through the entire project life cycle and ensure that systems are maintained in compliance state after go live.
• Work hand in hand with Facilities, Engineering, MSAT and Operations teams to support their projects and operational needs
• Troubleshoot issues with facilities control systems, automation systems or related infrastructure to ensure and improve manufacturing performance (e.g. yield improvements, etc.) while maintaining all those systems in compliance with cGMPs.
• Provide configuration, development, and break/fix day-to-day support of automation systems.
• Manage automation system documentation and SOPs, prepare technical and user documentation, and conduct system training
• Lead automation-related investigations into Quality Event Reports and implement the necessary corrective actions.
• Lead system maintenance and manage automation life cycle (review application patching, document test plans, and execute test scripts)
• Coordinate with business users for development of reports (batch, material, audit trails, etc.) to support efficient operations.
• Manage automation contractors supporting projects, day-to-day systems operations, planned and unplanned maintenance activities and ensure they comply with safety and quality systems.

Requirements:

• Bachelor’s degree in Engineering, Science, or related technological field
• 6+ years’ experience in life-science regulated environment (e.g. FDA) with working knowledge of the regulatory requirements for pharmaceutical applications  
• 4+ years’ experience integrating/interfacing equipment to control systems via OPC, Ethernet IP, etc.
• Experience with PLCs (e.g. Allen Bradley & Siemens), SCADA (e.g. Ignition), Batch Operations (S88/S95), OSI Soft Pi Historian, BMS/BAS (e.g. Siemens Desigo)
• Control panel and automation hardware and infrastructure design experience
• Demonstrated knowledge of 21CFR Part 11, Annex 11, and GAMP5
• Requires working in an pharmaceutical industrial manufacturing environment including gowning, desired with experience in aseptic operations.

Lead Systems Engineer

Location: Royersford, PA (Wilmington, DE)

Position Type: Full-Time

About Proconex

Proconex is a leading solutions provider specializing in industrial automation, engineering, and process control. We are dedicated to delivering high-quality engineering services to our clients, especially in complex, project-based environments within life sciences and other critical industries.

Role Overview

The Lead Systems Engineer will take a hands-on role in the design, configuration, and start-up of Distributed Control Systems (DCS) in highly regulated industries. This position emphasizes technical leadership in executing projects from design to startup, with a focus on DeltaV and other DCS platforms, ensuring quality and compliance throughout the project lifecycle.

Key Responsibilities

• Lead the implementation of automation systems, primarily focusing on Distributed Control Systems (DeltaV or DeltaV MES).
• Design, develop, and test batch control processes, leveraging extensive experience with DCS configurations and system integration.
• Manage all stages of the project lifecycle including planning, installation, commissioning, and on-site support.
• Collaborate with cross-functional teams, providing expertise and coordinating with clients to align project goals, system requirements, and troubleshooting strategies.
• Support and mentor junior engineers, sharing best practices in system design, startup, and troubleshooting.
• Produce and review critical project documentation, such as functional specifications, user requirement specifications, risk assessments, and operational qualification protocols.
• Serve as a primary technical lead in interactions with clients, demonstrating technical solutions and advising on process optimization.

Qualifications

• Experience: 7-10 years in automation engineering with a focus on Distributed Control Systems implementation in a project-driven environment, preferably as a systems integrator.
• Technical Skills: Proven experience with DeltaV DCS or comparable platforms in life sciences with deep knowledge of system design, configuration, and batch processing.
• Industry Knowledge: Background in life sciences is preferred, though a strong control background in any industry will be considered.
• Leadership Abilities: Demonstrated experience in leading project teams or overseeing critical project phases, even if in an informal capacity.
• Education: Bachelor’s degree in Chemical, Electrical, or related Engineering field.

Why Proconex?

Joining Proconex means becoming part of an innovative team where engineering excellence meets real-world applications. You’ll have the opportunity to lead high-impact projects, leverage cutting-edge technology, and contribute to projects that make a difference in critical industries. Apply today to learn more!

Overview

As the Industrial Engineer - Warehouse Design & Automation, you will be a technical leader responsible for designing, engineering, and scaling warehouse facilities across a multi-site fulfillment network. Your primary mission is to translate business demand and growth forecasts into data-driven, buildable warehouse designs that optimize throughput, labor efficiency, space utilization, and cost.

This role partners closely with Operations, Real Estate, Facilities, IT, Finance, and external automation vendors to deliver standardized, scalable solutions for greenfield builds, expansions, and retrofits. You will bring a strong systems mindset, deep understanding of material flow, and a bias for simplicity, operability, and long-term sustainability.

What You’ll Do

Warehouse Design & Engineering

• Design end-to-end warehouse layouts for new facilities, expansions, and retrofits, supporting high-throughput fulfillment operations.
• Engineer material flows from inbound receiving through outbound shipping, ensuring efficient, safe, and ergonomic processes.
• Define building-level requirements including dock counts, clear heights, column spacing, power, floor loading, and equipment zoning, in partnership with cross-functional teams.
• Develop and maintain layout drawings, design assumptions, and engineering narratives for leadership, finance, and vendor review.

MHE & Automation Engineering

• Specify, evaluate, and engineer material handling and automation systems including:
• Conveyors, sorters, and divert systems
• Pick modules, pallet flow, case flow, and mezzanines
• AMRs, AGVs, and goods-to-person solutions
• Packaging, labeling, dimensioning, and weighing systems
  
  
• Develop functional specifications, throughput targets, and redundancy strategies for automation systems.
• Partner with integrators and vendors through RFPs, design reviews, FAT/SAT, commissioning, and go-live support.

Capacity Modeling & Data Analysis

• Build capacity, throughput, and labor models using forecasted volumes, SKU profiles, and order characteristics.
• Analyze peak scenarios, seasonality, and failure modes to stress-test designs.
• Quantify trade-offs between labor, automation, space utilization, service levels, and cost.
• Use post-launch operational data to refine assumptions and continuously improve design standards.

Financial Analysis & Business Case Development

• Develop CapEx and OpEx estimates for MHE and automation investments.
• Support ROI, payback period, and total cost of ownership analyses.
• Partner with Finance and Leadership to support capital planning and investment decisions.
• Drive standardization across facilities to reduce engineering variability and lifecycle cost.

Launch Support & Continuous Improvement

• Support warehouse launches and expansions through go-live and stabilization.
• Partner with Operations, Maintenance, and Controls teams to resolve systemic design issues.
• Perform post-launch audits and feed learnings back into network design standards and playbooks.
• Document and maintain reference designs, engineering standards, and best practices.

What You’ll Need

• Bachelor’s degree in Industrial Engineering, Mechanical Engineering, Systems Engineering, or a related field.
• Alternatively, equivalent hands-on experience designing warehouse automation systems may be considered.
• 5+ years of experience in warehouse design, material handling engineering, or automation.
• Proven experience designing high-volume distribution or fulfillment centers.
• Strong analytical and modeling skills, with advanced proficiency in Excel; SQL, Python, or simulation tools are a plus.
• Proficiency in AutoCAD or similar layout and design tools.
  
  

Preferred Qualifications

• Master’s degree in Industrial Engineering, Mechanical Engineering, Systems Engineering, or a related field.
• Experience in large-scale e-commerce, retail, or 3PL fulfillment networks.
• Familiarity with WMS concepts and system integration dependencies.
• Greenfield warehouse launch experience.
• Experience working directly with automation integrators or MHE vendors.
  
  

Key Attributes

• Strong systems thinker with the ability to design for scale, peak, and failure scenarios.
• Data-driven decision maker who can clearly communicate technical trade-offs to non-technical stakeholders.
• Practical, operations-aware engineer who values simplicity, maintainability, and standardization.
• Builder mindset with a desire to create mechanisms, standards, and repeatable solutions.

Fay, S&B USA Construction is a family of diversified heavy-civil and industrial construction companies recognized for safe and innovative infrastructure solutions.  Our team of experienced professionals demonstrate an unparalleled commitment to safety on all of our projects, which has led to numerous local and national awards.  We excel on projects with tight schedules and difficult working conditions without compromising our number one core value of working safely. Our innovative solutions and customer focused approach provide our clients with unmatched safety, quality and value.

Summary:  

Provide surveying service which includes technical and administrative direction for layout and surveying personnel, including scheduling, training, assigning work activities and monitoring performance. Insures all primary, secondary and layout control data comply with engineering standards. Issues, edits and maintains all field engineering books and records. Ensure all inspections, sign-off, etc. are complete and comply with procedures. Ensure construction work complies with design drawings.  This role will report to the Chief of Surveying.

Responsibilities/Functions:

• Manage all Survey and Layout Activities
• Coordinate and schedule work with Project Directors, Project Managers, Project Engineers, Superintendents and Estimating
• Maintaining a high level of expertise in GPS/Survey equipment, software and methodology
• Maintain, track, inventory, manage and coordinate use of survey and machine and control equipment
• Performs review tasks (QA/QC) for 3D modeling and grading
• Maintain, track, inventory, manage and coordinate use of GPS, survey and machine control equipment
• Provides work control lines and elevations that are required for accurate measurement and correct installation of materials by crafts, i.e., forms for concrete pours, anchor bolts, piping hangers and supports, etc.
• Set-up protocols to assure accuracy of permanent work
• Modifies, directs or assists in the modification existing construction documents
• Provides checking of as-built conditions that require the use of surveying techniques
• Provides topographic and cross-section surveys as required for planning and payment quantities
• Provides quantity calculations as required
• Documents surveying activities and maintains surveying equipment
• Effectively supervises surveying technician and surveying trainee personnel
• Coordinates surveying activities with the assigned engineer to meet the construction requirements
• Communicates and reinforces the Company vision, values and goals
• Performs additional assignments per supervisor’s direction

Essential skills and experience:

• The ideal candidate will be licensed or working toward licensure and have a minimum of 1-3 years of practical field experience in Heavy Highway construction with use of Machine Control and the ability to use design software such as AutoCAD, C3D or Carlson Civil. 

Physical Demands:

While performing the duties of this job, the employee is regularly required to climb or balance; stoop, kneel, or crouch; and see and hear well (either naturally or with correction), stand; walk, (stand for long periods of time) handle, or feel; use arms and hands to reach for, handle and manipulate objects. The employee must frequently work or walk on uneven ground and is required to wear steel toed boots at all times. It is mandatory that the employee wear approved personal protective equipment.  Employee will perform a variety of duties while exposed to outside elements, working at heights, and confined or enclosed spaces.

What We Offer:

Competitive compensation, medical/dental/vision coverage, paid PTO, 401k with a company match, training, career planning, and more.

Core Values:

Work Safely: Safety is our Culture

Deliver Return:  Earning a fair profit increases our long-term value

Value People: Take Care of Employees and They Will Take Care of Clients

Act with Integrity: Honesty Builds Trust

Provide Solutions: Better Solutions Yield Greater Satisfaction

S&B USA Construction and all its affiliate companies are committed to providing equal employment opportunities in all aspects of employment to qualified individuals without regard to the following criteria: race, color, national origin, religion, sex, pregnancy, sexual orientation, gender identity or expression, mental or physical disability, age, familial or marital status, ancestry, military status, veteran status or genetic information as well as any other prohibited criteria under any local, state or federal law applicable to S&B USA Construction. As part of the firm’s equal employment opportunity statement, S&B USA Construction will also take affirmative action to ensure that minorities, females, veterans, and qualified people with disabilities are considered for employment and promotional opportunities.

If a reasonable accommodation is needed for the interview process, Please contact Human Resources at recruiting@shikunusa.com or Phone: 412-471-4200 ext. 1032

Agency Policy:  Please refer to our Agency Policy and disclaimer statement regarding resume submissions.  https://www.shikunusa.com/notice-to-staffing-agencies

#LI-LK1