The Project Leader has technical responsibility of Work Package projects with an estimated engineering count of 30-80 FTEs. The responsibilities of the Project Leader are to manage the technical project activities according to agreed deliverables, quality and cost as well as ensuring compliance with customer requirements. Additional responsibilities are to qualify the internal staffing of projects, develop and adhere to project timeline and report the operational situation during internal reviews.

Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty in accordance with defined standards. Other duties or tasks may be assigned as required. The essential duties and responsibilities are as follows:

Customer/Bid & Offer

• Review technical requirements set by customer
• Participate in quotation activities
• Support client meetings and on/off-site visits
• Monitor delivery progress with the customer
• Support negotiation with the customer

Project Management

• Manage project team and tasks on a day-to-day basis
• Report/communicate to external technical stakeholder
• Monitor delivery progress on projects
• Manage technical scope of projects
• Responsible for quality of deliverables
• Prepare customer Steering Committee meetings
• Evaluate activities/roles that should be near-/offshore, if any
• Support definition of roles and responsibilities in project organization​
• Support validation of project organization and team members
• Monitor technical skills of team members
• Report operational/financial situation during ALTEN internal monthly financial review​s
• Identify technical/project training needs on projects
• Support efforts to change/improve engagement model with clients
• Drive and support AI implementation

Supervisory Needs and Responsibilities:

• Supervise and manage team by providing guidance/mentorship, assigning tasks, setting goals, and evaluating performance of team members.
• Make strategic decisions based on alignment with ALTEN leadership and the overall organizational strategy.

Minimum Qualifications and Skills: To perform this job successfully, an individual should meet each requirement. The requirements listed below are representative of the required knowledge, skills, and/or ability.      

Education and Experience

• Bachelor’s degree (B.S.) from a technical college or university in Engineering
• Minimum 8 years of total experience, including a minimum of 2 years in a Project Leadership role
• Must possess hands-on experience with project management
• Must have experience from following product through complete development cycle (concept, development, prototyping to industrialization)
• Understanding of prototyping and manufacturing processes.

Preferred Qualifications and Skills: To perform this job successfully, an individual should be able to perform each essential duty. The requirements listed below are representative of preferred knowledge, skills, and/or ability.

Education and Experience

• Demonstrated ability to manage projects successfully to customer requirements (scope, cost, schedule, margin, delivery of contractual deliverables)
• Experience from workshop/floor environment
• Experience from working in a startup environment
• Degree or professional experience in Electrical Engineering

Language Ability

• Ability to read, write, speak, analyze and interpret all forms of communication and business correspondence.
• Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the engineers.

Reasoning Ability

• Ability to systematically analyze complex problems, draw relevant conclusions and implement appropriate solutions.
• Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

Computer Skills

• To perform this job successfully, an individual should have extensive knowledge of the following software programs:
  • Microsoft Office suite of programs (Word, Excel, PowerPoint, Power BI, and Outlook)

Physical Demands and Working Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.

Physical Demands

• While performing the duties of this job, the employee is frequently required to sit or stand.
• The employee is occasionally required to stand; walk; use hands to handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear.
• The employee must occasionally lift and/or move up to 30 pounds.
• Specific vision abilities required by this job include depth perception and the ability to adjust focus.

Work Environment

• Mainly from customer location with potential for remote work depending on client.

Project Location

• The Project Leader needs to be located in San Francisco, CA to have proximity to client.

Salary: $130,000 - $145,000

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience. 

Key Responsibilities

Assist in developing and organizing project plans, schedules, and defined deliverables.
Monitor ongoing activities to support on-time milestone completion and maintain updated tracking logs and action registers.
Gather, organize, and summarize technical and program data for leadership visibility and decision-making.
Act as a liaison among cross-functional teams, engineering staff, management, and customers when appropriate.
Ensure project records and documentation are accurate, current, and stored in accordance with company procedures.
Identify potential schedule impacts or risks and communicate concerns to the PCE or appropriate stakeholders.
Support the preparation and distribution of planning documents, progress reports, and related materials.
Encourage compliance with internal engineering standards and project governance processes.
Assist with resource coordination efforts, including assignment tracking, time reporting updates, and material requests.
Participate in technical and program meetings, capturing notes, decisions, and follow-up actions.
Contribute to risk tracking and escalation activities as directed by engineering leadership.
Help coordinate design reviews, audits, and configuration control efforts.
Provide logistical support for project-related meetings and occasional travel coordination.
Support adherence to applicable regulatory, quality, and industry standards.
Track completion of key deliverables, review gates, and required program milestones.

Qualifications

Bachelor’s degree in Engineering, a scientific discipline, or another related technical area.
Approximately two or more years of professional experience in an engineering environment, project support function, or similar role.
Exposure to cross-functional or multidisciplinary projects; experience in aerospace or industrial settings is advantageous.
Working knowledge of project management concepts and commonly used tools such as scheduling software and spreadsheet applications.
Experience contributing to projects within highly regulated industries (e.g., aerospace, automotive, or similar sectors).
Understanding of technical documentation standards and configuration control methodologies.
Academic coursework or demonstrated interest in project management principles.

Core Competencies

Teamwork: Ability to collaborate effectively within diverse, cross-functional groups.
Organization & Attention to Detail: Capable of managing multiple tasks, maintaining schedules, and ensuring documentation accuracy.
Communication Skills: Clear and professional verbal and written communication suited for technical teams and leadership.
Analytical Thinking: Practical problem-solving skills with the ability to interpret and organize technical information.
Proactive Mindset: Takes initiative in identifying potential issues and elevating them appropriately.

Work Environment & Travel

Occasional travel may be required (up to 10%).
Flexibility to work additional hours as project needs dictate.
Other related duties may be assigned as necessary.

Salary Range: $80,000-$100,000

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience 

We are seeking an experienced Project Manager with a strong background in tooling and industrial equipment procurement and installation. This role will lead end-to-end project execution for new equipment installations, upgrades, and tooling projects, ensuring alignment with production requirements, budget, and timeline.

Responsibilities:

• Develop detailed project plans, schedules, and budgets for tooling and equipment projects.
• Coordinate cross-functional teams including engineering, operations, maintenance, and suppliers.
• Monitor project progress, identify risks, and implement mitigation strategies.
• Source and evaluate suppliers for tooling and industrial equipment.
• Negotiate contracts, pricing, and delivery terms to ensure cost-effective procurement.
• Manage vendor relationships and oversee compliance with specifications and quality standards.
• Oversee installation, testing, and commissioning of industrial equipment and tooling.
• Ensure adherence to safety standards and regulatory requirements during installation.
• Validate equipment performance and handover to operations.
• Track project costs and ensure adherence to approved budgets.
• Prepare regular status reports for stakeholders and management.
• Drive continuous improvement in project execution and cost efficiency.

Qualifications:

• 2+ years of project management experience in manufacturing or industrial environments.
• Proven expertise in tooling and industrial equipment procurement and installation.
• Skills:
• Strong knowledge of manufacturing processes and equipment specifications.
• Excellent negotiation and vendor management skills.
• Proficiency in project management tools (MS Project, SAP, or similar).
• Strong communication and leadership abilities.
• Preferred
• PMP or equivalent project management certification.
• Experience with lean manufacturing principles and continuous improvement initiatives.

Salary Range: $75,000

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience.

Job Purpose: ln collaboration with the Global Account Managers (GAM) and the Business Units, the Director Salesops and Performance (DSP) coordinates the Sales activity for dedicated market sector(s) and set of Global Customers in each geography to achieve annual sales ambitions in top line growth, market share and profitability

Main Duties & Responsibilities

■ Market Strategy Support

• Support analysis of Alten and its competitors’ performance in designated market sectors
• Propose insights based on benchmarks, historical data and understanding of market trends
• Identify and escalate risks that would impact Alten business
• Animate a global community to share market trends and provide actionable take aways
• Provide on demand analysis of market sub-segment or Global customers
• Periodically assess list of selected Global customers

■ Commercial Support

• Act as Business Partner to GAM for selected accounts
• Interact with customers at senior level to support commercial activity, identify and address risk/opportunities
• Coach Managers to animate internal/external commercial rituals for Global Accounts

■ Sales Performance Management

• Monitor sales momentum and pipeline health
• Generate data-driven insights from CRM analytics to guide sales strategies
• Create dashboards and reports to provide visibility into key sales performance metrics
• Drive win/loss analysis and recommendations for continuous improvement of sales performance

■ RFI/RFQ Management

• Orchestrate RFI answer across geographies and Alten organizations in coordination with Bid team
• Support large RFQ for selected accounts
• Sales Process and tools
• Contribute to streamline and improve efficiency of the end-to-end sales process and tools
• Ensure central repository of documents and data to support sales activity

■ Lead Sales Operations Team

• Recruit, mentor of develop Sales Operations Managers and Analysts
• Set goals for the team and manage workload
• Guarantee high service level

Qualifications:

• 8+ yrs of experience in automotive/trucking sales operations position 
• Bachelor's degree required, Master's degree preferred
• Expertise of automotive/trucking industries
• Experience with tracking sales metrics on a CRM
• Experience working with global teams
• Experience driving and supporting day to day activities of sales personelle
• Experience supporting Bid, RFI and RFQ activities

Salary Range: 100,000-125,000 + Bonus 

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience 

Note: Due to the nature of the work, only US Persons (citizens or permanent residents) need apply for this position. 

Responsibilities;

• Proactively builds solid and long-term candidate relationships and networks for current and future talent needs, by interacting with potential candidates on social media and professional networks (e.g. LinkedIn, CB, Handshake, and Jobvite.)
• Crafting and sending recruiting emails.
• Execute sourcing searches (cold calling, networking, identifying applicant associations/pools/professional groups and affiliations, websites, Boolean searches, targeted companies/individuals etc.), managing candidate experience through the sourcing process.
• Provide talent market insights, competitive intelligence and talent demographics as appropriate to enable Recruitment Manager and Business Managers to be best informed on market conditions.
• Develop recruitment campaigns for specific vacancies to provide diverse pools/ pipelines of high quality candidates
• Screen candidates to determine availability, interest level, business unit needs, and qualifications
• Establish and maintain accurate and well documented pipelines of searches, recruiting activity, contact data, etc.
• Ensures compliance with all policies
• Assist with special projects as needed
• Ability to navigate databases (Greenhouse experience a plus)

Skills and qualification required

• 0-2 years Engineering Recruiting experience, preferably in Engineering or other highly technical fields
• Preferably Bachelors degree holder
• Applicant Tracking Systems and Vendor Management Systems (i.e. Beeline, Job Diva, Fieldglass) knowledge
• Microsoft Office knowledge
• Very good interpersonal and communication skills to use in a multicultural context
• Autonomous and rigorous person with high technical interest
• Able to manage his/her own priorities while also being a team player keeping a focus on the company’s interests

Responsibilities include:

• Supports administrative tasks of Programs, Engineering, Sales and Support departments and Executive Team.
• Event coordination for office meetings, company meetings, group events, holiday parties, and customer events.
• Manages hospitality activities for receiving customers.
• Coordinates facility service providers including construction coordination
• Coordinate surveys and announcements.
• Coordinate company calendar.
• Coordinates shipping and receiving, and US Mail.
• Keeps weekly and monthly KPI charts up to date.
• Monthly expense reports.
• Purchases office supplies.
• Manages preparation of lunchroom and common areas.
• Manages office space and preparation for new employees.
• Manages company organizational chart and seating chart.
• Supports release of documents into documentation control.
• Manages and organizes receiving records.

Skills/Qualifications required:

• Ability to be fully on-site 
• High school diploma requied, College degree preferred
• 2 yrs minimum of Office Experience
• Facilities experience (Managing contractors such as maintenance, locksmiths, etc.) 
• Experience managing/running an office (or equivalent experience running a household)
• Experience Coordinating events 
• Organized and detail oriented.
• Self-starter.

Salary: $15-25 / hour

We are seeking a highly motivated Senior Cost Engineer to join our dynamic team.  

In this role, you will collaborate closely with Engineering, Purchasing, Product Planning, and Finance to drive end-to-end product cost across the product lifecycle. This role combines technical understanding and financial analysis to influence design and feature decisions, ensure alignment to cost targets, and improve product value and competitiveness.

Key responsibilities:

• Deliver product cost forecast and cost analyses in start cost projects including risks and opportunities.
• Drive product cost throughout the project/product lifecycle, ensuring alignment with strategic cost targets, including breaking down the overall cost target into product cost requirements at system/component level.
• Drive design to cost initiatives to create cost-efficient solutions
• Collaborate across commodities and stakeholders to balance QDCF-S (Quality, Delivery, Cost, Features, Sustainability) in design concepts.
• Act as the voice of the customer on cost, feature & value trade-offs.
• Drive innovation and continuous improvement in cost management practices, leveraging benchmarks and digital tools.
• Develop and maintain cost models using finance processes and tools to support decision-making.
• Promote cost-conscious behaviors by mentoring/coaching and sharing best practices.

Required qualifications:

• Bachelor’s degree in Finance, Engineering, or a related field (or equivalent experience).
• Strong analytical skills, including financial modeling and cost analysis.
• Ability to interpret technical data and translate it into financial implications and recommendations.
• Proven collaboration and communication skills in cross-functional, matrixed environments.

Salary Range: $90,000 - $100,000 

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience.

Key Responsibilities

• Support customers in the design, optimization, and management of electrical infrastructures
• Analyze and improve network performance, reliability, and energy efficiency
• Perform cable design, network sizing, and system modeling
• Conduct network simulations and short-circuit studies
• Provide both technical and cost-related assessments of electrical systems
• Deliver actionable recommendations for infrastructure optimization and long-term sustainability
• Collaborate with cross-functional teams to ensure successful implementation of solutions

Required Qualifications

• Proven experience with applied electrical networks in complex environments such as:
• Data centers
• Semiconductor fabrication facilities
• Airports
• Metro systems
• Industrial sites
• Strong expertise in:
• Cable design
• Network sizing and modeling
• Network simulation
• Short-circuit analysis
• Ability to evaluate both technical performance and financial implications of infrastructure decisions
• Strong customer-facing skills with the ability to explain complex technical topics clearly
• Proficiency with Matlab / Simulink

Preferred Skills

• Experience in energy optimization and sustainability initiatives
• Background in power systems engineering or electrical infrastructure consulting
• Familiarity with industry standards and grid compliance requirements

Salary Range: $90,000-100,000

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience 

What You’ll Do

• Program, set up, and operate CNC mills, lathes, multi‑axis machines, grinders, EDM, and manual equipment to optimize performance and minimize downtime
• Read and apply engineering drawings, blueprints, and advanced GD&T
• Perform complex offsets, tool compensation, and program adjustments to maintain tight tolerances
• Manufacture precision components to tolerances of .0001" or better with minimal supervision
• Troubleshoot machining, tooling, and material issues and implement corrective actions
• Recommend and execute process, tooling, and programming improvements
• Partner with Tool Design to develop fixtures, jigs, and custom tooling
• Conduct in‑process and final inspections using precision measurement equipment
• Share knowledge and best practices to support team development
• Adhere to safety, quality, and 5S workplace standards

Required Qualifications

• AA/AS degree or equivalent technical training with 8+ years of relevant machining experience
• Advanced expertise in CNC and manual machining and programming
• Strong working knowledge of GD&T and precision measurement
• Ability to work independently and resolve complex technical problems
• High mechanical aptitude and attention to detail

Preferred Qualifications

• Aerospace or defense manufacturing experience
• Machining certifications or advanced technical education
• Tool and die or specialized machining background
• Experience with continuous improvement methodologies
• Strong communication and mentoring skills

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience.

Note: Due to the nature of the work, only US Persons (citizens or permanent residents) need apply for this position.

We are seeking an experienced Aircraft Exterior Lighting Engineer to lead the design, development, and validation of advanced exterior lighting systems for next-generation aircraft. This role will focus on delivering reliable, compliant, and high-performance lighting solutions across a range of platforms, including conventional and electric aircraft.

The ideal candidate has hands-on experience with aircraft lighting systems and a strong understanding of environmental, electrical, and regulatory considerations.

Key Responsibilities

Design and develop aircraft exterior lighting systems, including:

Navigation (position) lights

Anti-collision lighting

Landing and taxi lights

Recognition and logo lighting

Perform and document engineering analyses, including:

Electrical load and power consumption assessments

Thermal performance and heat dissipation analysis

Environmental durability (vibration, temperature extremes, moisture exposure)

Support system integration activities and ensure compatibility with aircraft electrical and structural systems

Collaborate with cross-functional teams including electrical, mechanical, and certification engineering

Ensure compliance with applicable regulatory and environmental standards

Support testing and qualification activities, including environmental and EMI/EMC validation

Contribute to design reviews, technical documentation, and continuous improvement efforts

Required Qualifications

Bachelor’s degree in Electrical Engineering, Aerospace Engineering, Mechanical Engineering, or related field

Direct experience designing or supporting aircraft exterior lighting systems

Familiarity with DO-160 environmental testing and qualification standards

Knowledge of EMI/EMC principles and their impact on aircraft systems

Experience performing electrical and thermal analyses

Strong understanding of aircraft electrical systems and integration considerations

Experience in eVTOL, UAV, or electric aircraft development programs

Familiarity with LED-based lighting technologies and control systems

Experience with simulation or analysis tools for thermal and electrical performance

Knowledge of certification requirements for exterior lighting systems

Experience working with suppliers and managing component development

Salary Range: $100,000-$125,000

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience 

We are seeking an experienced Aircraft Exterior Lighting Engineer to lead the design, development, and validation of advanced exterior lighting systems for next-generation aircraft. This role will focus on delivering reliable, compliant, and high-performance lighting solutions across a range of platforms, including conventional and electric aircraft.

The ideal candidate has hands-on experience with aircraft lighting systems and a strong understanding of environmental, electrical, and regulatory considerations.

Key Responsibilities

Design and develop aircraft exterior lighting systems, including:

• Navigation (position) lights
• Anti-collision lighting
• Landing and taxi lights
• Recognition and logo lighting
• Perform and document engineering analyses, including:
• Electrical load and power consumption assessments
• Thermal performance and heat dissipation analysis
• Environmental durability (vibration, temperature extremes, moisture exposure)
• Support system integration activities and ensure compatibility with aircraft electrical and structural systems
• Collaborate with cross-functional teams including electrical, mechanical, and certification engineering
• Ensure compliance with applicable regulatory and environmental standards
• Support testing and qualification activities, including environmental and EMI/EMC validation
• Contribute to design reviews, technical documentation, and continuous improvement efforts

Required Qualifications

• Bachelor’s degree in Electrical Engineering, Aerospace Engineering, Mechanical Engineering, or related field
• Direct experience designing or supporting aircraft exterior lighting systems
• Familiarity with DO-160 environmental testing and qualification standards
• Knowledge of EMI/EMC principles and their impact on aircraft systems
• Experience performing electrical and thermal analyses
• Strong understanding of aircraft electrical systems and integration considerations
• Experience in eVTOL, UAV, or electric aircraft development programs
• Familiarity with LED-based lighting technologies and control systems
• Experience with simulation or analysis tools for thermal and electrical performance
• Knowledge of certification requirements for exterior lighting systems
• Experience working with suppliers and managing component development

Salary Range: $100,000-$125,000

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience 

Key Responsibilities

Develop aircraft-level verification test cases derived from system requirements and applicable regulatory standards

Ensure end-to-end traceability between requirements, verification methods, test cases, and results

Author, review, and maintain key verification artifacts, including:

• Verification Plans
• Test Procedures and Automated Test Scripts
• Verification Reports and Compliance Documentation
• Support the integration and execution of verification activities across multiple environments, including:
• Ground testing (bench testing, iron bird, system integration labs)
• Flight test verification programs
• Collaborate with systems engineering, safety, and certification teams to ensure alignment with development and compliance objectives
• Contribute to continuous improvement of verification processes, tools, and methodologies

Required Qualifications

• Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, or related field
• Experience with FAA certification processes (Part 23, Part 27, or similar)
• Familiarity with ARP4754A and ARP4761 development and safety assessment processes
• Exposure to DO-160 environmental testing standards
• Experience supporting flight test programs and verification activities
• Strong understanding of systems engineering principles, requirements validation, and verification methodologies
• Experience with scripting or automation tools (e.g., Python, MATLAB, or similar)
• Experience working in integrated test environments (iron bird, SIL/HIL systems)
• Knowledge of requirements management and traceability tools (e.g., DOORS, Jama, Polarion)
• Familiarity with data analysis and test automation frameworks
• Strong technical writing and documentation skills

Salary Range: $100,000-$125,000

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience 

Key Responsibilities

Develop aircraft-level verification test cases derived from system requirements and applicable regulatory standards

Ensure end-to-end traceability between requirements, verification methods, test cases, and results

Author, review, and maintain key verification artifacts, including:

Verification Plans
Test Procedures and Automated Test Scripts
Verification Reports and Compliance Documentation
Support the integration and execution of verification activities across multiple environments, including:
Ground testing (bench testing, iron bird, system integration labs)
Flight test verification programs
Collaborate with systems engineering, safety, and certification teams to ensure alignment with development and compliance objectives
Contribute to continuous improvement of verification processes, tools, and methodologies

Required Qualifications

Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, or related field
Experience with FAA certification processes (Part 23, Part 27, or similar)
Familiarity with ARP4754A and ARP4761 development and safety assessment processes
Exposure to DO-160 environmental testing standards
Experience supporting flight test programs and verification activities
Strong understanding of systems engineering principles, requirements validation, and verification methodologies
Experience with scripting or automation tools (e.g., Python, MATLAB, or similar)
Experience working in integrated test environments (iron bird, SIL/HIL systems)
Knowledge of requirements management and traceability tools (e.g., DOORS, Jama, Polarion)
Familiarity with data analysis and test automation frameworks
Strong technical writing and documentation skills

Salary Range: $100,000-$125,000

Key Responsibilities

• Direct the engineering, design, and development of electrical power generation systems and associated hardware.
• Manage and guide a team of engineers to successfully deliver projects, ensuring high technical standards, product quality, and on-time completion.
• Promote effective collaboration across multidisciplinary teams, including design, analysis, manufacturing, and testing functions.
• Support and mentor engineering personnel, encouraging skill development, innovation, and continuous improvement.
• Verify that all designs comply with applicable regulations, safety requirements, and customer expectations.
• Drive the creation of innovative engineering approaches to address complex technical problems.
• Oversee test planning and execution, evaluate results, identify deficiencies, and implement solutions to achieve performance and safety objectives.
• Evaluate technical risks and establish mitigation plans to minimize project impact.
• Act as the primary technical liaison between internal teams, customers, and stakeholders, providing updates and presenting engineering progress and solutions.
• Travel may be required on an occasional basis, both within the United States and internationally (less than 10%).

Education and Experience

• Bachelor’s or Master’s degree in Aerospace Engineering or a closely related discipline.
• Minimum of 3 years of experience in aerospace engineering, including demonstrated leadership in technical roles.

Skills and Qualifications

• Background in systems engineering within regulated environments, working across multidisciplinary teams and products.
• Familiarity with industry standards such as ARP4754A, RTCA/DO-254, RTCA/DO-178C, or similar aerospace compliance frameworks.
• Strong knowledge of aerospace design, production, and validation processes.
• Understanding of regulatory requirements from agencies such as FAA and EASA.
• Excellent analytical thinking, problem-solving, and decision-making capabilities.
• Strong communication, organization, and project coordination skills.
• Ability to manage complex projects and think strategically across multiple engineering domains.
• Experience with electrical systems engineering in aerospace applications.
• Proficiency with requirements management tools (e.g., Windchill RV&S, IBM Rational DOORS, or equivalent).
• Familiarity with engineering software such as CATIA, SolidWorks, or similar platforms.
• Knowledge of system integration and verification, particularly for aircraft electrical power generation and distribution, including requirements decomposition.
• Demonstrated adaptability, with a willingness to learn new tools, take on challenges, and contribute to team improvements.

Salary Range: $90,000-$105,000

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience 

We are seeking a Senior Electrical Utilities Engineer to act as the site’s Owner’s Engineer
for ongoing capital projects in a GMP manufacturing environment. This role involves highpower, industrial electrical activities on utilities and building infrastructure.
You will act as a technical back-checker engineering contractors, validating that designs, specifications, and installations are compliant with NEC, North Carolina codes, and the
company safety standards.
Responsibilities:
• Review and approve single-line diagrams, load studies, and power distribution designs
• Validate switchgear, MCCs, transformers, breakers, cabling, grounding
• Verify motor sizing and protection (ex: 200 HP motors, VFDs, starters)
• Ensure compliance with:
o NEC
o State of North Carolina electrical codes
o GMP / EHS standards
• Act as technical lead for engineering firms
• Identify design gaps, safety risks, and non-compliances
• Support construction reviews, redlines, FAT/SAT
• Be the electrical owner rep for capital and brownfield projects
Requirements:
• 10+ years experience in industrial / utilities electrical engineering
• Strong background in:
o Power distribution
o High-voltage and high-power systems
o Industrial motors and drives
• Experience acting as Owner’s Engineer
• Strong NEC knowledge
• Experience in pharma, biotech, life sciences, or GMP manufacturing environments
• Experience managing EPCs, contractors, inspectors, AHJs
• Comfortable walking down sites and reviewing as-built installations
Nice to have:
• Pharma manufacturing or clean utility systems
• Brownfield capital projects
• Experience in regulated environments (FDA, GMP, EHS)
• Multi-discipline project exposure (HVAC, piping interfaces)

Salary Range: $100,000-140,000

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience 

The Supplier Field Expeditor / Field Representative acts as the onsite representative at supplier facilities to ensure timely delivery, quality compliance, and adherence to contractual and technical requirements.
This role is responsible for monitoring production progress, mitigating supply chain risks, and serving as the primary point of contact between the business and the supplier to protect program schedules and product integrity.
 
Key Responsibilities
Schedule & Production Oversight
•    Monitor supplier manufacturing progress against committed schedules
•    Track critical milestones (machining, assembly, inspection, shipment)
•    Identify delays, capacity constraints, or material shortages
•    Drive corrective actions to recover schedule
Supplier Performance Monitoring
•    Ensure supplier compliance with contractual, technical, and quality requirements
•    Verify production processes align with approved documentation
•    Confirm readiness prior to shipment
•    Provide structured reporting on supplier health and risk level
Quality & Compliance Interface
•    Support surveillance of aerospace quality standards (e.g., AS9100)
•    Witness inspections or key production steps as required
•    Escalate quality non-conformances or process deviations
•    Coordinate with Quality and Engineering teams
Risk Identification & Escalation
•    Proactively identify supply chain risks (capacity, workforce, tooling, material)
•    Communicate risk exposure to  program leadership
•    Support development of mitigation and recovery plans
Cross-Functional Coordination
•    Serve as liaison between Procurement, Engineering, Quality, and the supplier
•    Facilitate resolution of technical or logistical issues
•    Support supplier improvement initiatives
 
Required Qualifications
•    5+ years experience in aerospace, manufacturing, or supply chain operations
•    Strong understanding of production processes (machining, assembly, fabrication, etc.)
•    Familiarity with aerospace quality standards (AS9100 preferred)
•    Experience with supplier management or onsite representation
•    Ability to read engineering drawings and technical documentation
•    Strong communication and escalation skills
•    Willingness to travel or be stationed at supplier sites
 

Salary Range: 85,000-110,000

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience 

The Supplier Field Expeditor / Field Representative acts as the onsite representative at supplier facilities to ensure timely delivery, quality compliance, and adherence to contractual and technical requirements.
This role is responsible for monitoring production progress, mitigating supply chain risks, and serving as the primary point of contact between the business and the supplier to protect program schedules and product integrity.
 
Key Responsibilities
Schedule & Production Oversight
•    Monitor supplier manufacturing progress against committed schedules
•    Track critical milestones (machining, assembly, inspection, shipment)
•    Identify delays, capacity constraints, or material shortages
•    Drive corrective actions to recover schedule
Supplier Performance Monitoring
•    Ensure supplier compliance with contractual, technical, and quality requirements
•    Verify production processes align with approved documentation
•    Confirm readiness prior to shipment
•    Provide structured reporting on supplier health and risk level
Quality & Compliance Interface
•    Support surveillance of aerospace quality standards (e.g., AS9100)
•    Witness inspections or key production steps as required
•    Escalate quality non-conformances or process deviations
•    Coordinate with Quality and Engineering teams
Risk Identification & Escalation
•    Proactively identify supply chain risks (capacity, workforce, tooling, material)
•    Communicate risk exposure to  program leadership
•    Support development of mitigation and recovery plans
Cross-Functional Coordination
•    Serve as liaison between Procurement, Engineering, Quality, and the supplier
•    Facilitate resolution of technical or logistical issues
•    Support supplier improvement initiatives
 
Required Qualifications
•    5+ years experience in aerospace, manufacturing, or supply chain operations
•    Strong understanding of production processes (machining, assembly, fabrication, etc.)
•    Familiarity with aerospace quality standards (AS9100 preferred)
•    Experience with supplier management or onsite representation
•    Ability to read engineering drawings and technical documentation
•    Strong communication and escalation skills
•    Willingness to travel or be stationed at supplier sites

Salary Range: $85,000-110,000

The Supplier Field Expeditor / Field Representative acts as the onsite representative at supplier facilities to ensure timely delivery, quality compliance, and adherence to contractual and technical requirements.
This role is responsible for monitoring production progress, mitigating supply chain risks, and serving as the primary point of contact between the business and the supplier to protect program schedules and product integrity.
 
Key Responsibilities
Schedule & Production Oversight
•    Monitor supplier manufacturing progress against committed schedules
•    Track critical milestones (machining, assembly, inspection, shipment)
•    Identify delays, capacity constraints, or material shortages
•    Drive corrective actions to recover schedule
Supplier Performance Monitoring
•    Ensure supplier compliance with contractual, technical, and quality requirements
•    Verify production processes align with approved documentation
•    Confirm readiness prior to shipment
•    Provide structured reporting on supplier health and risk level
Quality & Compliance Interface
•    Support surveillance of aerospace quality standards (e.g., AS9100)
•    Witness inspections or key production steps as required
•    Escalate quality non-conformances or process deviations
•    Coordinate with Quality and Engineering teams
Risk Identification & Escalation
•    Proactively identify supply chain risks (capacity, workforce, tooling, material)
•    Communicate risk exposure to  program leadership
•    Support development of mitigation and recovery plans
Cross-Functional Coordination
•    Serve as liaison between Procurement, Engineering, Quality, and the supplier
•    Facilitate resolution of technical or logistical issues
•    Support supplier improvement initiatives
 
Required Qualifications
•    5+ years experience in aerospace, manufacturing, or supply chain operations
•    Strong understanding of production processes (machining, assembly, fabrication, etc.)
•    Familiarity with aerospace quality standards (AS9100 preferred)
•    Experience with supplier management or onsite representation
•    Ability to read engineering drawings and technical documentation
•    Strong communication and escalation skills
•    Willingness to travel or be stationed at supplier sites

Salary Range: $85,000-110,000

Fleet Support Engineer

Vehicle Development

We are seeking an experienced Fleet Support Engineer to ensure the reliability, performance, and operational readiness of our vehicle fleet. This role sits at the intersection of hardware, software, and operations, requiring strong technical expertise in sensor systems and a hands-on approach to diagnosing and resolving field issues. The ideal candidate thrives in fast-paced environments, works effectively across teams, and takes ownership of complex technical challenges from investigation through resolution.

What You’ll Do

• Act as the escalation lead for sensor and perception-related issues impacting fleet operations.
• Analyze vehicle logs and system data to isolate faults, determine root causes, and drive corrective actions.
• Create and continuously refine technical documentation and troubleshooting procedures for field technicians.
• Support integration and validation of new sensor hardware, including LiDAR, radar, and camera systems.
• Establish repeatable diagnostic workflows to improve efficiency in identifying calibration, communication, and data quality issues.
• Review historical vehicle and fleet-level datasets to detect recurring problems and performance trends.
• Partner with hardware, software, and systems engineering teams to strengthen monitoring tools and diagnostic visibility.
• Implement fleet-wide corrective measures and verify their effectiveness through structured validation metrics.
• Identify and define critical data signals needed to measure system health and confirm issue resolution.
• Contribute to ongoing improvements in vehicle reliability and operational uptime.
• Provide occasional after-hours support when necessary (advance notice provided).
• Travel periodically within the U.S. to assist at operational locations.

What You Bring

• 6+ years of experience in transportation, aerospace, robotics, electric vehicles, or autonomous systems, with significant exposure to perception hardware.
• Bachelor’s degree in Electrical Engineering, Computer Engineering, or a related technical discipline.
• Hands-on experience troubleshooting low- and high-voltage systems safely.
• Familiarity with Unified Diagnostic Services (UDS) and vehicle communication frameworks.
• Strong understanding of system architecture, including hardware/software integration and network communications.
• Ability to interpret schematics, wiring diagrams, and connector pinouts.
• Systems-level thinking with the capability to decompose complex vehicle behavior into component-level issues.
• Proactive, collaborative mindset with strong cross-functional communication skills.
• Ability to successfully complete a background screening.

Nice to Have

• Experience supporting electric vehicle platforms.
• Background in remote vehicle diagnostics and field support.
• Proficiency with Linux environments and Python for log parsing or fleet-scale data analysis.
• Experience developing or maintaining software that interfaces directly with hardware.
• Knowledge of networking fundamentals, including TCP/IP and socket-level communication.
• Familiarity with industry-standard vehicle diagnostic tools.

Salary Range: $100,000-125,000

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience 

We are seeking a Systems Engineer with strong V&V verification experience to support the development, certification, and verification of aircraft systems for electric aviation platforms. This role sits at the intersection of systems engineering, safety, certification, and V&V verification, with hands-on involvement across requirements definition,  modeling, testing, and compliance demonstration at the Component, System, and Aircraft levels.

The ideal candidate is deeply comfortable working in a certification-driven environment, understands the criticality of clear, traceable requirements, and can collaborate effectively with certification engineers, DERs, design engineers, test teams, and suppliers.

Key Responsibilities

Systems Engineering & Requirements

• • Develop, manage, and validate aircraft-, system-, and component-level requirements
  • Generate and maintain requirements aligned with customer, regulatory, and certification needs
  • Ensure bidirectional traceability between requirements, verification methods, and compliance evidence
  • Manage requirements within an ALM environment (e.g., Polarion)
  • Provide critical design feedback related to safety, requirements completeness, and verification readiness

Safety & Certification

• • Apply SAE ARP4754A and ARP4761 processes throughout the system lifecycle
  • Support and contribute to Functional Hazard Assessments (FHA), Fault Tree Analysis (FTA), and FMEA
  • Participate in certification planning and compliance demonstrations
  • Interface with certification engineers and DERs to support FAA approval activities
  • Support certification programs under Part 23 / 27 / 33, including electric propulsion systems

Verification & Validation

• • Author, execute, and maintain verification plans, procedures, and test reports
  • Define and execute requirements-based test strategies at the appropriate level (Component, System, Aircraft)
  • Coordinate and execute lab, integration, and system-level tests
  • Verify systems such as:
    • Vibrations, airframe, fuselage
    • Interiors
    • Doors & Transparencies
    • Cabin Equipment
    • Environmental Control Systems
    • Interior Lighting
    • Smoke Detection Systems
    • etc
  • Ensure verification activities align with overall certification schedules
  • Track and report verification status keeping traceability to support program management decisions

Modeling, Analysis & Test Support

• • Perform system behavior modeling to support validation activities
  • Support test automation and data analysis where applicable
  • Ensure verification deliverables meet certification expectations

Minimum Qualifications

• Bachelor’s degree in Mechanical, Electrical, Software Engineering, or related field
• 10+ years (up to 15+ preferred) experience on Part 23 or 27 aircraft or rotorcraft programs
• Strong working knowledge of:
  • SAE ARP4754A
  • SAE ARP4761
  • FAA Order 8110.4C
  • RTCA DO-160G, DO-331, DO-178C
• Experience with ARP4754A-based verification
• Experience with requirements-based testing and traceability audits
• Proficiency with ALM and verification tools (Polarion, JIRA, Confluence)
• Experience with solid modeling tools (Onshape, SolidWorks, CATIA, or equivalent)
• Comfortable working in a cross-functional, certification-focused environment
• Ability to work fully onsite in Burlington, VT.

Preferred / Above-and-Beyond Qualifications

• Experience with:
  • Part 23 Amendment 64
  • ASTM F3338
  • Part 33 certification or electric propulsion systems
• Familiarity with:
  • Polarion ALM
  • CATIA
  • ANSYS
  • Mil-HDBK-217 / Mil-HDBK-21
  • Reliability tools (PTC Windchill, Isograph, Relyence)
• Test and automation experience using:
  • LabVIEW
  • Python or other test automation frameworks
• Background in aerospace verification & validation
• Prior experience in a certifying environment (Part 23, 25, 27, 29, or DO-based programs EASA or FAA)

Tools & Work Environment

• Google G-Suite (Docs, Sheets, Slides, Drive, Calendar, etc.)
• Slack and collaborative engineering workflows
• ALM-driven, traceability-heavy certification environment

Salary: $120,000 - $130,000

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience 

Note: Due to the nature of the work, only US Persons (citizens or permanent residents) need apply for this position.

Position Responsibilities

• Engineer mechanical components and subassemblies for rotating machinery to satisfy customer specifications and targeted performance objectives, working under the guidance of a lead engineer
• Create detailed 3D CAD models and 2D engineering drawings, and perform supporting analyses such as tolerance accumulation, bearing load calculations, and preload assessments
• Ensure designs comply with company requirements and applicable industry standards, including GD&T and design-for-manufacturability principles
• Serve as a technical contributor in design, manufacturing, and test reviews by evaluating designs, identifying risks, and recommending corrective actions
• Execute assigned tasks in alignment with approved budgets and project schedules
• Review customer requirements and contribute to technical proposals, cost estimates, test plans, process qualification documents, bills of materials, schedules, and engineering reports as needed
• Proactively identify and resolve technical issues affecting current products or new development efforts
• Maintain clear, timely communication with peers and leadership regarding technical progress, challenges, and potential risks
• Assist with testing and validation activities for both new and existing products, with oversight from senior engineering staff
• Follow established safety practices and actively support continuous improvement of health, safety, and environmental initiatives
• Support occasional domestic and international travel (typically once per quarter)
• Be available for extended or off-hour work during peak project phases when required

Education and Experience

• Bachelor’s degree in Mechanical Engineering or a closely related discipline
• Minimum of four (4) years of experience in mechanical design within a product development and manufacturing environment

Technical Skills and Competencies

• Hands-on experience designing rotating machinery such as motors, generators, or similar systems
• Ability to create and interpret engineering drawings and specifications, including proper application of GD&T
• Sound engineering judgment across multiple mechanical disciplines
• Strong analytical and problem-solving capabilities
• Effective interpersonal and collaboration skills for working with cross-functional teams and customers
• Well-developed organizational, documentation, and reporting skills
• Proficiency in developing 3D CAD models and 2D drawings
• Working knowledge of Microsoft Office tools
• Familiarity with common shop and inspection tools, including measurement equipment

Preferred Qualifications

• Experience designing bearing systems and wound components
• Knowledge of rotor dynamics principles
• Familiarity with oil and air cooling approaches for rotating equipment
• Exposure to aerospace standards such as DO-160, ARP4754A, and ARP4761
• Experience using CATIA

Salary Range:$85,000-90,000

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience 

Position Responsibilities

• Engineer mechanical components and subassemblies for rotating machinery to satisfy customer specifications and targeted performance objectives, working under the guidance of a lead engineer
• Create detailed 3D CAD models and 2D engineering drawings, and perform supporting analyses such as tolerance accumulation, bearing load calculations, and preload assessments
• Ensure designs comply with company requirements and applicable industry standards, including GD&T and design-for-manufacturability principles
• Serve as a technical contributor in design, manufacturing, and test reviews by evaluating designs, identifying risks, and recommending corrective actions
• Execute assigned tasks in alignment with approved budgets and project schedules
• Review customer requirements and contribute to technical proposals, cost estimates, test plans, process qualification documents, bills of materials,
• schedules, and engineering reports as needed
• Proactively identify and resolve technical issues affecting current products or new development efforts
• Maintain clear, timely communication with peers and leadership regarding technical progress, challenges, and potential risks
• Assist with testing and validation activities for both new and existing products, with oversight from senior engineering staff
• Follow established safety practices and actively support continuous improvement of health, safety, and environmental initiatives
• Support occasional domestic and international travel (typically once per quarter)
• Be available for extended or off-hour work during peak project phases when required

Education and Experience

• Bachelor’s degree in Mechanical Engineering or a closely related discipline
• Minimum of four (4) years of experience in mechanical design within a product development and manufacturing environment

Technical Skills and Competencies

• Hands-on experience designing rotating machinery such as motors, generators, or similar systems
• Ability to create and interpret engineering drawings and specifications, including proper application of GD&T
• Sound engineering judgment across multiple mechanical disciplines
• Strong analytical and problem-solving capabilities
• Effective interpersonal and collaboration skills for working with cross-functional teams and customers
• Well-developed organizational, documentation, and reporting skills
• Proficiency in developing 3D CAD models and 2D drawings
• Working knowledge of Microsoft Office tools
• Familiarity with common shop and inspection tools, including measurement equipment
• Exposure to aerospace standards such as DO-160, ARP4754A, and ARP4761
• Experience designing bearing systems and wound components
• Knowledge of rotor dynamics principles
• Familiarity with oil and air cooling approaches for rotating equipment
  Experience using CATIA

Salary Range:$85,000-90,000

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience 

We are seeking a Mid-Level Avionic Software Engineer with hands-on experience developing safety-critical aerospace software in accordance with DO-178 standards, typically at Design Assurance Level (DAL) A or B. The ideal candidate has 5–8 years of experience and is comfortable contributing across the software lifecycle, from requirements and implementation to integration and verification, within a highly regulated engineering environment.

Responsibilities:

• Contribute to the design, development, implementation, and verification of embedded avionic software in compliance with DO-178C (DAL A or B).

• Implement and optimize software components and algorithms for constrained, real-time embedded environments.

• Support system integration activities by collaborating with systems, hardware, and test engineering teams.

• Participate in defining software architecture and interface requirements, ensuring traceability and adherence to aerospace standards.

• Perform and participate in formal design and code reviews to ensure safety, quality, and regulatory compliance.

• Assist with hardware bring-up, low-level debugging, and troubleshooting using tools such as oscilloscopes, logic analyzers, and protocol analyzers.

• Work with embedded communication protocols (e.g., CAN, SPI, I2C, ARINC 429, MIL-STD-1553) to ensure reliable system interactions.

Qualifications;

• Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, Computer Science, or a related technical discipline.

• 5–8 years of experience in embedded software development within aerospace or other safety-critical industries.

• Direct experience working with DO-178C development, verification, and certification processes (DAL A or B strongly preferred).

• Proficiency in C and/or C++, with familiarity in Python or other scripting languages for test or automation tasks.

• Solid understanding of embedded systems design, RTOS concepts, timing constraints, and low-level hardware interfaces.

• Ability to work fully on-site in Raleigh, North Carolina.

Salary Range: $100,000 - $130,000 

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience 

**Due to the nature of the work, only US Persons (citizens or permanent residents) need apply for this position**

Summary: 

 Essential Duties and Responsibilities: As Manager of Sales for ALTEN you will be responsible for sales and consulting services, recruitment, and management of engineering consultants in a professional and international environment. In short, your job will be to strive for happy Alten consultants and satisfied customers. By coaching your consultants and by creating continuous opportunities for them you create a dynamic and committed environment which helps stimulate business and support our customers.   

ALTEN offers a well-defined career path which enables you as a manager to stay and grow professionally within the company. Other duties or tasks may be assigned as required. Management may modify, change or add to the duties of this description at any time without notice. The essential duties and responsibilities include the following: 

Supervisory Needs and Responsibilities  

• Generate new leads by customer prospecting and sales activities. 
• Experience within coaching and developing account managers/business development managers

• Establish and maintain excellent customer relations. 

• Represent ALTEN at career fairs, job fairs and other relevant events.  

• Work closely with customers in order to understand and define their need in detail. 

• Continuously interview and match candidates in order to have already qualified talent ready to meet customer’s current and anticipated needs. 

• Complete background checks and coach candidates before interviews with customers. 

• Support the candidates in getting started on new assignments. 

• As you recruit consultants into your open positions, you will also assume management responsibilities for those consultants, eventually building your own group of ALTEN employees. 

• Help your consultants with their professional development and needs with the target to maintain employee satisfaction and increase retention. 

• Coach your team members through all the aspects described above. Follow up and report KPI’s weekly, take responsibility for the teams actions and performance. 

• Be able to coach Account Managers to meet their goals, take action and act on performance issues within the team by close coaching and guidance. 

• Be part of Business Unit strategic planning meetings, define targets and bonuses, represent company at Operational reviews, participate in regional ALTEN US meetings and potentially be appointed as Director of Sales. 
• ALTEN’s business model and corporate functions will support you with the structure and processes needed to maintain your consultants through their career with ALTEN. 

Minimum Qualifications Skills:  

• MSc or BSc degree in engineering or business is required 

• 5 – 6 years of Business Development, Account Management and/or Sales, with minimum of 1 years which in Sales Leadership experience required 

• Previous documented full life cycle recruiting and/or sales experience with an emphasis in engineering and product development is preferred 

• Experience coaching team members required 

• Excellent communications skills with all levels of candidates, clients and employees. 

• Strong analytical, organizational, and decision-making skills. 

• Ability to work under minimal supervision. 

• Ability to work a flexible schedule as needed. 
• Candidates MUST HAVE ENGINEERING SERVICES EXPERIENCE TO BE CONSIDERED.