Overview

The EE/SW Integration Manager at the OEM level owns system-level & sub-system-level electrical and software integration strategy, execution, and release readiness across multiple vehicle programs. The EE/SW Integration Sr. Manager is responsible for ensuring that all electrical and software systems deliver the intended vehicle-level functional performance. This role goes beyond architecture compliance and focuses on feature behavior, timing performance, system robustness, drivability impact, and cross-domain interaction quality. The position owns system-level validation and readiness of how the vehicle behaves under real-world conditions, including transient events, edge cases, environmental stress, and feature concurrency. Work directly with MSTs, software engineers, systems engineers, validation teams, and suppliers to ensure robust delivery.

What you’ll do

Become part of an iconic brand that is set to revolutionize the electric pick-up truck & rugged SUV marketplace by achieving the following:

Roles and Responsibilities

• Overview of the roles and responsibilities are listed below for reference (scope to be adjusted further along the program development based on need).
• Own L2 system + sub-system integration of all domain controllers and distributed ECUs into the vehicle E/E architecture.
• Own L2 Test infrastructure HW/SW builds, model builds to drive HIL, SIL, MIL implementation frameworks for automation toolchain, test and release.
• Own Software Integration & Validation per vehicle software maturity, performance and release gates and approve vehicle integration builds (per milestones).
• Ensure alignment to OEM-defined zonal or domain-based architectures.
• Validation responsible for network topology, gateway routing strategies, signal database integrity (DBC, ARXML), bandwidth utilization and bus loading.
• Validate and manage vehicle communication across CAN / CAN-FD, LIN, Automotive Ethernet (100/1000BASE-T1), FlexRay network framework.
• Validate and release bootloader compatibility, flashing strategy, partitioning strategy (AUTOSAR Classic/Adaptive), Memory and CPU utilization budgets.
• Coordinate integration across Powertrain / Electrification (BMS, inverter, charging), Body & Comfort, ADAS / AD compute platforms, Infotainment & Connectivity, Central Compute / Zonal Controllers.
• Validate that system behavior meets system requirement specifications (SRS) under nominal conditions, boundary conditions, fault injection scenarios, high bus load scenarios, low voltage and cold crank conditions.
• Ensure feature-level integration synchronization, power mode management, Wake-up/sleep strategy robustness.
• Own system-level regression test planning, drive root cause analysis of cross-domain issues and help support integration war-room activities during DV/PV builds.
• Release and validate functional KPIs such as defect leakage rate, integration maturity index, build stability metrics, bus load margins, SW flash success rate etc.
• Validate wake-up/sleep strategies across ECUs, ensure no unintended current draw or parasitic drain and correct power state transitions during vehicle power cycles, start/stop/sleep, OTA updates/events.
• Validate UDS/DoIP response timing, diagnostic sessions do not degrade functional performance, DTC accuracy and freeze frame integrity and robustness.
• Leadership Competencies:
  • Strong system-level thinking, technical arbitration capability
  • Structured problem solving
  • Program milestone ownership, ability to operate in high-pressure launch environments
  • Build and mentor new engineers & teams from ground-up

Location & Travel Expectations:

• This role will be based out of the Scout Motors corporate headquarters in Charlotte, NC. 
• This role requires 4-5 days per week in the office, with regular in-person meetings and events. 
• Applicants should expect that the role will require the ability to convene with Scout colleagues in person and travel to participate in events on behalf of the company from time to time.

What you’ll bring 

We expect all Scout employees to have integrity, curiosity, resourcefulness, and strive to exhibit a positive attitude, as well as a growth mindset. You’ll be comfortable with change and flexible in a fast-paced, high-growth environment. You’ll take a collaborative approach to achieve ambitious goals. Here's what else you'll bring:

• Master’s degree in electrical engineering, Computer Engineering, Computer Science, or a related field with 10+ years of experience.
• Strong understanding of vehicle E/E architecture and ECU-level software stacks, automotive communication protocols (CAN, LIN, FlexRay, Ethernet), UDS diagnostics (ISO 14229) and diagnostic communication tools.
• Expert knowledge of Jira, GitHub/GitLab, Jenkins, and Artifactory. ALM/PLM Proficiency in Siemens Polarion, IBM DOORS Next Gen, or PTC Windchill.
• Strong understanding, development and verification of plant and control models in MATLAB/Simulink for execution in hardware in the loop test environment, dSpace control desk and automation desk.
• Strong understanding of 1st principles in Engineering, result/solution oriented.
• Familiarity with SW for embedded systems, EE systems and architecture
• Familiarity with A2B, CAN, Automotive Ethernet, LIN, LVDS communication protocols and Vehicle Network tools, such as CANalyzer, CANoe, etc.
• Expertise with complex problem solving, data analysis, access/interpret/drive results with extended teams.
• Knowledge of Automotive design and development process, system requirements, and general engineering best practices.

What you'll gain

The benefits of joining Scout include the chance to build products and a company from the ground up.  This is a chance to create something new and lasting – with an iconic brand at its foundation.  In addition, Scout provides competitive compensation and benefits to support your physical, mental, and financial wellbeing. Program specifics are detailed in company policies and employee benefit guides, select highlights:

• Competitive insurance including:
  • Medical, dental, vision and income protection plans
• 401(k) program with:
  • An employer match and immediate vesting
• Generous Paid Time Off including:
  • 20 days planned PTO, as accrued
  • 40 hours of unplanned PTO and 14 company or floating holidays, annually
  • Up to 16 weeks of paid parental leave for biological and adoptive parents of all genders
  • Paid leave for circumstances related to bereavement, jury duty, voting time, or military leave
• Corporate Vehicle Program with:
  • Eligibility for 1 assigned vehicle
  • A mobility stipend

Pay Transparency

This is a full-time, exempt position eligible to receive a base salary and to participate in an annual performance bonus program. Final salary offered will be determined based on factors including but not limited to the candidate's skills and experience. The annual performance bonus program is preset and not candidate dependent.

Initial base salary range = $160,000.00 - $192,500.00

Internal leveling code: M7

What you’ll do

Become part of an iconic brand that is set to revolutionize the electric pick-up truck & rugged SUV marketplace by achieving the following:

• Responsible for developing Scout Exterior Lighting Standards to ensure a robust product. Ensuring appropriate vehicle connection points for electrical are present in the base truck and SUV vehicle architectures.
• Participate in and/or lead development of RFQ packages, tech reviews, and supplier selection.
• Lead Product Development Team(s) to collaborate cross functionally across Scout internal functions, and suppliers to set design direction, and lead development, packaging, and execution of unique Scout accessories to bring them to market.
• Contribute to the development of product specification books, test plans, DVP&R, DFMEA, Control Plans, and Quality Assurance requirements.
• Direct design and analysis groups to create 3D math models (CAD), complete 3D packaging, and validate with analytical models (Optics, FEA, CFD, etc.) to fulfill functional and design requirements, and ensure compatibility, using Design Rules, Regulatory items, and attributes, such as NVH, water management, craftsmanship, etc.
• Be a key member and decision maker within the technical leadership team and liaison with all Scout functional teams.
• Develop and maintain all component and subsystem requirements and specifications, including device transmittals and interface control documents (ICD).
• Ensure all program targets, including Piece Cost, ED&D Budget, Timing, Weight, and Quality, are met.
• Track open issues and collaborate with other functional groups as needed to drive issues to resolution efficiently and effectively.
• Ensure on-time validation and adequate testing coverage for all requirements (component, system, and vehicle) is achieved and traceability is maintained for assigned systems and components.
• Conduct product evaluation and design reviews during prototype and pre-production development phases.
• Develop prototypes for virtual and physical verification testing, including field testing.
• Proactively stay attuned to new advancements, market trends, consumer experience and propose system improvements accordingly.
• Follow automotive industry design best practices, such as: Robust Engineering, Design for Manufacturability, and Design for Serviceability.

Location & Travel Expectations:

• This role may be based out of the Scout Motors corporate headquarters in Charlotte, NC. 
• This role requires 4-5 days per week in the office, with regular in-person meetings and events. 
• Applicants should expect that the role will require the ability to convene with Scout colleagues in person and travel to participate in events on behalf of the company from time to time.
• Any Additional Travel Requirements (optional): Must be able to support International travel, as needed. Passport Required

What you’ll bring 

We expect all Scout employees to have integrity, curiosity, resourcefulness, and strive to exhibit a positive attitude, as well as a growth mindset. You’ll be comfortable with change and flexible in a fast-paced, high-growth environment. You’ll take a collaborative approach to achieve ambitious goals. Here's what else you'll bring: 

• Bachelor’s or master’s degree in mechanical engineering, electrical engineering, or a relevant field
• Min 8 years experience required in position okay for lighting areas and relevant automotive assignments. Including all three phases of product development (Design, Test and Launch)
• Skilled in utilizing CATIA for designing and developing detailed parts
• Strong technical skills and expertise in lighting components and systems, coupled with a 1st principles approach to problem solving
• High level of oral and written communication skills.
• Excellent organization and prioritization skills.
• Familiarity with computer-aided engineering (CAE) or direct experience in this field
• An ability to build strong working relationships with people across all organizational levels/functional teams
• Strong sense of teamwork, able to act as mentor to less experienced engineers.
• Experience working on Electric Vehicle programs desirable.
• Comfort with the ambiguity and ability to thrive in fast-paced environments

What you'll gain

The benefits of joining Scout include the chance to build products and a company from the ground up.  This is a chance to create something new and lasting – with an iconic brand at its foundation.  In addition, Scout provides competitive compensation and benefits to support your physical, mental, and financial wellbeing. Program specifics are detailed in company policies and employee benefit guides, select highlights:

• Competitive insurance including:
  • Medical, dental, vision and income protection plans
• 401(k) program with:
  • An employer match and immediate vesting
• Generous Paid Time Off including:
  • 20 days planned PTO, as accrued
  • 40 hours of unplanned PTO and 14 company or floating holidays, annually
  • Up to 16 weeks of paid parental leave for biological and adoptive parents of all genders
  • Paid leave for circumstances related to bereavement, jury duty, voting time, or military leave

Pay Transparency

This is a full-time, exempt position eligible to receive a base salary and to participate in an annual performance bonus program. Final salary offered will be determined based on factors including but not limited to the candidate's skills and experience. The annual performance bonus program is preset and not candidate dependent.

Initial Base Salary Range: $130,000.00 - $160,000.00

Internal Leveling Code: IC8

What you’ll do

Become part of an iconic brand that is set to revolutionize the electric pick-up truck & rugged SUV marketplace by achieving the following:

• Design and implement extensible, maintainable, and performant Kotlin-based Android/AOSP/AAOS apps, frameworks, and SDKs 
• Deliver new features, enhancements, and bug fixes at a high velocity 
• Leverage test driven development principles to maximize code quality 
• Actively contribute to code quality by participating in code reviews 
• Author design documentation, technical specifications, and delivery plans; define roadmaps 
• Embrace and refine team coding standards and processes 
• Track and leverage new Android/AOSP/AAOS technologies, software engineering best practices, and design patterns 
• Collaborate with cross-functional teams, including UX Design, product, and other main systems engineering partners 
• Provide technical leadership within the engineering org 

Location & Travel Expectations:

• This role may be based out of the Scout Motors corporate headquarters in Charlotte, NC / Fremont, California. 
• This role requires 4-5 days per week in the office, with regular in-person meetings and events. 
• Applicants should expect that the role will require the ability to convene with Scout colleagues in person and travel to participate in events on behalf of the company from time to time.

What you’ll bring 

We expect all Scout employees to have integrity, curiosity, resourcefulness, and strive to exhibit a positive attitude, as well as a growth mindset. You’ll be comfortable with change and flexible in a fast-paced, high-growth environment. You’ll take a collaborative approach to achieve ambitious goals. Here's what else you'll bring: 

• BS/MS degree in computer science or related field 
• Extensive understanding of Android OS, AOSP app optimization, performance, and frameworks 
• Exceptional software development skills with Kotlin, Java, and Android Studio 
• Extensive knowledge of software architecture, design patterns, and software development best practices 
• Highly productive and motivated, able to work independently with minimal direction; able to transform ambiguity into actionable deliverables 
• 5+ years of Android application software development experience 
• 10+ years of software development experience 
• Excellent verbal and written communication skills 
• Excellent collaborative skills, ability to provide and receive guidance 
• Effective problem solving skills, able to consider alternative options and select the optimal solution 
• Thoughtful, pragmatic approach that considers tradeoffs (e.g.: future proofing vs. over-engineering) 
• Embraces software engineering KPIs, including delivery velocity, quality, planning 

What you'll gain

The benefits of joining Scout include the chance to build products and a company from the ground up.  This is a chance to create something new and lasting – with an iconic brand at its foundation.  In addition, Scout provides competitive compensation and benefits to support your physical, mental, and financial wellbeing. Program specifics are detailed in company policies and employee benefit guides, select highlights:

• Competitive insurance including:
  • Medical, dental, vision and income protection plans
• 401(k) program with:
  • An employer match and immediate vesting
• Generous Paid Time Off including:
  • 20 days planned PTO, as accrued
  • 40 hours of unplanned PTO and 14 company or floating holidays, annually
  • Up to 16 weeks of paid parental leave for biological and adoptive parents of all genders
  • Paid leave for circumstances related to bereavement, jury duty, voting time, or military leave

Pay Transparency

This is a full-time, exempt position eligible to receive a base salary and to participate in an annual performance bonus program. Final salary offered will be determined based on factors including but not limited to the candidate's skills and experience. The annual performance bonus program is preset and not candidate dependent.

Initial Base Salary Range: $140,000.00 - $170,000.00

Initial Base Salary Range: $154,000 - $187,000

Internal Leveling Code: IC9

What you’ll do

Become part of an iconic brand that is set to revolutionize the electric pick-up truck & rugged SUV marketplace by achieving the following:

• Install, configure, and maintain AI platform and tools.
• Design, deploy, and operate infrastructure supporting ML and LLM workloads.
• Build, containerize, and deploy AI services using Docker.
• Build and maintain Machine Learning CI/CD pipelines for training, testing, and deployment.
• Deploy and manage AI services across cloud and on-prem environments.
• Automate infrastructure provisioning using Terraform and Infrastructure-as-Code best practices.
• Monitor system performance, reliability, and scalability of AI platforms.
• Implement observability for agentic AI systems to ensure reliability, transparency, and debuggability.
• Perform regular security updates, patching, access control, and vulnerability remediation.
• Integrate AI tools with APIs, data platforms, and internal systems.
• Research, evaluate, and prototype new AI, LLM, and MLOps tools.
• Troubleshoot infrastructure, data, and deployment issues.
• Research, test, and prototype emerging AI technologies.
• Document system architecture, deployment processes, and operational runbooks.

Location & Travel Expectations:

• This role is based out of the Scout Motors corporate headquarters in Charlotte, NC.
• This role requires 4-5 days per week in the office, with regular in-person meetings and events. 
• Applicants should expect that the role will require the ability to convene with Scout colleagues in person and travel to participate in events on behalf of the company from time to time.

What you’ll bring 

We expect all Scout employees to have integrity, curiosity, resourcefulness, and strive to exhibit a positive attitude, as well as a growth mindset. You’ll be comfortable with change and flexible in a fast-paced, high-growth environment. You’ll take a collaborative approach to achieve ambitious goals. Here's what else you'll bring: 

• Bachelor's degree in computer science, information technology, or related field or equivalent work experience.
• 7+ years Practical experience with LLM platforms, LLMOps, and MLOps.
• Experience deploying and maintaining AI or data platforms in production.
• Hands-on experience with AI/automation tools.
• Experience designing and orchestrating agentic automation workflows.
• Strong experience with Terraform and Infrastructure-as-Code.
• Proven experience deploying applications using Docker (Docker files, image optimization, container lifecycle).
• Expertise with cloud platforms such as AWS.
• Expertise with CI/CD tooling (GitHub Actions, GitLab CI).
• Strong Knowledge of Kubernetes and orchestration.
• Solid understanding of networking.
• Experience supporting high-availability, production AI systems.
• Scripting skills (Python, PySpark, Bash).
• Knowledge of security best practices, patch management, and access controls.
• Collaborate with engineering, data, and product teams to support AI initiatives.
• Excellent problem-solving and troubleshooting skills. When a problem occurs, you run towards it not away.
• Effective communication and collaboration skills. You treat colleagues with respect. You have a desire for clean implementations but are also humble in discussing alternative solutions and options.
• A teaching and coaching approach to guiding engineers and teams in approaches.
• Minimum of High School Diploma, GED or equivalent required for all roles at Scout Motors, Inc.

What you'll gain

The benefits of joining Scout include the chance to build products and a company from the ground up.  This is a chance to create something new and lasting – with an iconic brand at its foundation.  In addition, Scout provides competitive compensation and benefits to support your physical, mental, and financial wellbeing. Program specifics are detailed in company policies and employee benefit guides, select highlights:

• Competitive insurance including:
  • Medical, dental, vision and income protection plans
• 401(k) program with:
  • An employer match and immediate vesting
• Generous Paid Time Off including:
  • 20 days planned PTO, as accrued
  • 40 hours of unplanned PTO and 14 company or floating holidays, annually
  • Up to 16 weeks of paid parental leave for biological and adoptive parents of all genders
  • Paid leave for circumstances related to bereavement, jury duty, voting time, or military leave

Pay Transparency

This is a full-time, exempt position eligible to receive a base salary and to participate in an annual performance bonus program. Final salary offered will be determined based on factors including but not limited to the candidate's skills and experience. The annual performance bonus program is preset and not candidate dependent.

Initial base salary range = $140,000.00 - $170,000.00

Internal leveling code: IC8

What you’ll do

Become part of an iconic brand that is set to revolutionize the electric pick-up truck & rugged SUV marketplace by achieving the following:

• Responsible for engineering design, and developing vehicle exterior systems including bumpers, fascia, grilles, brackets, exterior trim, bumper beams, hitches and structural reinforcements.
• Develop Scout Bumper/Fascia Standards and Requirements to ensure a robust product. Ensure seamless integration into production processes while meeting all required program milestones and deliverables.
• Participate in and/or lead development of Request for Quotation (RFQ) packages, technical reviews, and supplier selection.
• Lead Product Development Team(s) to collaborate cross functionally across Scout internal functions, and suppliers to set design direction, and lead development, packaging, and execution of unique Scout components to develop creative and feasible designs that meet both aesthetic and functional requirements.
• Ensure all program targets, including Piece Cost, Investment, ED&D Budget, Timing, Weight, and Quality, are met. 
• Contribute to the development of product specification books, test plans, DVP&R, DFMEA, Control Plans, and Quality Assurance requirements.
• Direct design and analysis groups to create 3D math models/Computer Aided Design(CAD), complete 3D packaging, and validate with analytical models (FEA, CFD, Crash, etc.) to fulfill functional and design requirements, and ensure compatibility, using Design Rules, Regulatory items, and attributes, such as NVH, water management, craftsmanship, etc.
• Ensure all exterior components meet global safety regulations and work within defined manufacturing processes such as injection molding, painting and assembly.
• Be a key member and decision maker within the technical leadership team and liaison with all Scout functional teams.
• Develop and maintain all component and subsystem requirements and specifications, including device transmittals and interface control documents (ICD).
• Track open issues and collaborate with other functional groups as needed to drive issues to resolution efficiently and effectively.
• Ensure on-time validation and adequate testing coverage for all requirements (component, system, and vehicle) is achieved and traceability is maintained for assigned systems and components.
• Conduct product evaluation and design reviews during prototype and pre-production development phases.
• Develop prototypes for virtual and physical verification testing, including field testing.
• Lead development and execution of exterior components including close collaboration with tool shops, suppliers to support tooling design build, debugging, and production readiness.
• Support product launches and post-launch activities by troubleshooting fit, finish, manufacturing concerns, while driving continuous improvement initiatives focused on quality, cost and design robustness.
• Proactively stay attuned to new advancements, market trends, consumer experience and propose system improvements accordingly.
• Follow automotive industry design best practices, such as: Robust Engineering, Design for Manufacturability, and Design for Serviceability.

Location & Travel Expectations:

• This role may be based out of the Scout Motors corporate headquarters in Charlotte, NC. 
• This role requires 4-5 days per week in the office, with regular in-person meetings and events. 
• Applicants should expect that the role will require the ability to convene with Scout colleagues in person and travel to participate in events on behalf of the company from time to time.
• Travel: Domestic and international travel must be supported. Passport required.

What you’ll bring 

We expect all Scout employees to have integrity, curiosity, resourcefulness, and strive to exhibit a positive attitude, as well as a growth mindset. You’ll be comfortable with change and flexible in a fast-paced, high-growth environment. You’ll take a collaborative approach to achieve ambitious goals. Here's what else you'll bring: 

• 5+ years of experience in vehicle exterior bumpers, fascia, Class A components and/or trim mechanical areas and relevant automotive assignments. Including all three phases of product development (Design, Test and Launch)
• Exterior systems technical skills/expertise with a 1st principles approach to problem solving.
• Bachelor’s degree in mechanical or relevant engineering field.
• Demonstrated experience in solving complex technical challenges in product design and development.
• Computer aided design (CAD) tools, including CATIA V5/V6 experience is highly recommended.
• Product lifecycle management (PLM) tools, including Teamcenter experience is highly recommended, VW Toolbase a plus.
• Computer aided engineering (CAE) awareness and/or direct experience.
• An ability to build strong working relationships with people across all organizational levels.
• Strong understanding of mechanical design principles, including GD&T (Geometric Dimensioning & Tolerancing), material selection, and design for manufacturing (DFM).
• Hands-on experience in automotive product launch, including prototype builds and production ramp-up.
• Familiarity with design and engineering considerations for high-volume automotive production.
• Ability to work collaboratively within cross-functional teams, including suppliers, design studios, and vehicle engineering teams.
• Excellent communication skills to effectively present technical concepts, findings, and recommendations to both technical and non-technical stakeholders.

What you'll gain

The benefits of joining Scout include the chance to build products and a company from the ground up.  This is a chance to create something new and lasting – with an iconic brand at its foundation.  In addition, Scout provides competitive compensation and benefits to support your physical, mental, and financial wellbeing. Program specifics are detailed in company policies and employee benefit guides, select highlights:

• Competitive insurance including:
  • Medical, dental, vision and income protection plans
• 401(k) program with:
  • An employer match and immediate vesting
• Generous Paid Time Off including:
  • 20 days planned PTO, as accrued
  • 40 hours of unplanned PTO and 14 company or floating holidays, annually
  • Up to 16 weeks of paid parental leave for biological and adoptive parents of all genders
  • Paid leave for circumstances related to bereavement, jury duty, voting time, or military leave

Pay Transparency

This is a full-time, exempt position eligible to receive a base salary and to participate in an annual performance bonus program. Final salary offered will be determined based on factors including but not limited to the candidate's skills and experience. The annual performance bonus program is preset and not candidate dependent.

Initial Base Salary Range: $110,000.00 - $135,000.00

Internal Leveling Code: IC9

ABOUT THE JOB

As a Product Quality Engineer, you will work inside & outside the organization to define, develop, and execute processes that deliver high quality aerospace structures (composites and metallic). This role focuses on collaborating and driving early engagement with our design team, and manufacturing team, to meet our quality requirements and to evaluate manufacturing performance. The right person for this role has knowledge of, aerospace quality standards, supply chain quality, inspection methods, root cause analysis, and continuous improvement. An ideal candidate for this role has experiences in aerospace manufacturing, product development, supplier quality, metrology, and quality planning. If you are someone who loves to build world-class quality processes and aerospace products, work hands-on with engineering, and be accountable for results of a growing team, then this role is for you.

WHAT YOU'LL DO

• Drive product development and production for aerospace programs using processes such as drawing and work instruction reviews, quality planning, inspection, end-of-line metrics, verification, validation, and qualification of processes, parts, and sub- assemblies.
• Drive clarity & resolution for production ambiguities associated with product maturity and process stability.
• Champion the transition from new product introduction (NPI) to a sustainable & predictable, rate manufacturing
• Coordinate quality requirements with the Supply Chain team and develop processes for incoming part and material acceptance.
• Ensure the execution of product and process requirements. Define and improve such requirements.
• Lead Root Cause and Corrective Action (RCCA), Material Review Board (MRB) activities, and inspection process Review the effectiveness of actions and share lessons learned across the product team. Establish metrics for measuring quality and the factors that predict quality performance.
• Support the continuous improvement of the Quality Management System. Define and improve required documentation and activities.
• Write, implement, and execute to project and program wide quality planning documentation.
• Leverage resources to deliver quality through the product development cycle.
• Design, develop, and leverage elements of the Anduril QMS to meet and exceed aerospace customers’ quality expectations.
• Understand qualification of internal and external manufacturing processes including measurement methods, PPAP/FAI, inspection methods & test protocol & acceptance test plans for aerospace programs.
• Lead the transition from engineering qualification to manufacturing variance testing for product quality coverage.
• Coordinate with supplier quality engineers who are supporting the design, development and procurement activities with the suppliers for aerospace programs.
• Create training documentation for manufacturing and quality personnel to support manufacturing and quality inspection.

REQUIRED QUALIFICATIONS

• Full-time on site in Anduril’s Morrisville, NC facility
• Bachelor’s degree in Engineering or similar technical field.
• Experience in Engineering, Manufacturing, or Quality on aerospace vehicles or systems.
• Working knowledge of design review and quality management of aerospace parts, assemblies, hardware, and raw materials.
• Experience partnering with production, design engineering, manufacturing engineering, and customer facing team members to deliver to customer requirements.
• Working knowledge of mechanical manufacturing processes. Application of industry standards and best practices.
• Experience with CAD systems such as NX, SolidWorks, or CATIA
• A strong ownership mindset with demonstrated capability to drive projects from start to completion.
• Analytical skills and experiences for data mining, data quality, metrics generation, issue management systems, and statistical analysis tools.
• Must be a U.S. Person due to required access to U.S. export controlled information or facilities

PREFERRED QUALIFICATIONS

• Working knowledge on composite and metallic airframe manufacturing processes and related defects
• 1+ years of experience with developing quality systems in highly complex manufacturing environments and suppliers. Working knowledge of AS9100/ AS6500 / ISO 9001-based Quality Management System requirements.
• Working knowledge of product development methodologies such as Failure Modes and Effects Analysis (FMEA), Advanced Product Quality Planning (APQP), Production Part Approval Process (PPAP) elements such as Measurement Systems Analysis (MSA), and Geometric Dimensioning and Tolerancing (GD&T).
• Experience with government contracts and MIL standard requirements commonly applied to quality requirements for aerial vehicles.
• Experience with manufacturing execution systems.

Our office, Queen City Endodontics - Hutcheson in Charlotte, NC is seeking a talented part-time Dental Assistant to join our busy specialty practice. 

We are looking for a talented and skilled Dental Assistant to help us accomplish our mission to improve the lives of our patients by providing a world-class specialty experience for every patient. Here is what you need to know about the role, our team and why we could be the right next step in your career.  

Your Responsibilities 

You will ensure excellent patient service and lift administrative and basic dental tasks off the Dentist’s shoulders. You will be focused on ensuring that the patients' needs, concerns, and questions are answered. You will help keep the patient relaxed and comfortable during their visit, being the patients go to resource during their visit which includes the following: 

• Welcoming patients to the dental office 
• Preparing patients for treatment, ensuring their comfort 
• Selecting and set up instruments, equipment, and supplies 
• Sterilizing instruments according to regulations 
• Assisting the dentist through 4-handed dentistry 
• Providing oral hygiene and post-operative care instructions 
• Keeping the dental room clean and well-stocked 
• Scheduling appointments and post op visits 
• Maintaining accurate patient records  
• Assisting with payment procedures 

As one of the essential members of our office, you will also help to facilitate/coordinate other office responsibilities as needed.  

Your Background 

You are a resourceful dental assistant who loves helping patients receive the experience they deserve and helping the Dentist to provide it. You're excited by the prospect of a patient leaving your office in a healthier, stronger, and more comfortable / happier being, each and every day. You’re a kind, passionate and collaborative problem-solver who is able to proactively adjust to shifting priorities, and values the chance to make an important impact.  

You also have the following: 

• At least 1-2 years of proven experience as dental assistant, endodontics preferred
• Knowledge of dental instruments and sterilization methods 
• Understanding of health & safety regulations 
• Ability to perform regulated non-surgical tasks 
• Good computer skills 
• Excellent communication and people skills 
• A strong attention to detail 
• Well-organized and reliable 
• A high school diploma  
• A certificate from an accredited dental assistant program (if required by law) 
• An active state radiology license (if required by law) 

If this sounds like you, you will fit right in with the team! 

Why You Should Join Our Team  

A career with us is a chance to work with everyone involved in the future of Specialty dental care. Dental Assistants, Sterilization Technicians, Specialists, Office Managers, Patient Care Coordinators and many more all work together to improve the patient care experience and great clinical results.  

We strive to build and maintain an environment where employees from all backgrounds are valued, respected, and have the opportunity to succeed. You will also find a culture of continuous learning and a commitment to supporting our team members in all aspects of their lives—at home, at work and everywhere in between.  

Your Benefits & Perks 

• BCBS Medical & Dental insurance Options 
• VSP Vision Coverage      
• Complimentary Life Insurance Policy (employee only)
• Short-term & Long-Term Disability   
• Pet Insurance Coverage  
• 401(k) plan w/match options
• HSA / FSA Account Access 
• Identity Theft Protection 
• Legal Services Package 
• Hospital/Accident/Critical Care Coverage 
• Paid Time Off 

8430 University Executive Park Dr, Ste 600 Charlotte, NC 28262

#priority

ABOUT THE JOB

As a Production Manager at Anduril North Carolina, you will be a pivotal strategic leader, orchestrating the daily execution and long-term vision of our operational landscape. This role demands a high-impact professional with a proven ability to lead and drive a diverse portfolio of critical projects, leveraging advanced data analytics and strategic insights to optimize performance, enhance efficiency, and achieve ambitious operational objectives across multiple projects. You will be at the forefront of shaping our operational future, ensuring scalable and resilient processes.

WHAT YOU'LL DO

• Lead Composite Production Operations: Lead and manage a dedicated team of highly skilled technicians in the production of advanced composite structures, ensuring efficient, high-quality manufacturing and timely delivery.
• Drive Production Excellence: Strategically plan and tactically direct monthly production operations to consistently achieve and exceed on-time delivery (OTD) goals and overall production performance targets, with a focus on composite layup, curing, and assembly processes.
• Champion Quality & Safety: Instill a culture of uncompromising quality and safety, rigorously upholding standards unique to composite manufacturing (e.g., material handling, cure cycles, NDT, ply-level inspection), minimizing defects, and fostering a secure, compliant, and pristine work environment.
• Develop & Mentor Talent: Develop and mentor production Leads/Supervisors, providing active coaching and support to cultivate professional growth, enhance leadership skills, and facilitate robust cross-training initiatives.
• Lead Continuous Improvement: Drive and implement Lean manufacturing principles (e.g., 6S, Kaizen) and other continuous improvement methodologies to optimize composite manufacturing processes, enhance efficiency, reduce waste (e.g. scrap, rework), and solve complex operational challenges.
• Strategic Communication: Ensure clear and strategic communication of production priorities, progress, potential risks, and resource requirements to senior leadership and cross-functional stakeholders, including close collaboration with the PBP team, fostering a collaborative and informed environment.
• Utilized data-driven analysis and Key Performance Indicators (KPIs) to strategically direct and optimize advanced composite manufacturing operations for mission-critical structures.
• Manufacturing Maturation: Transition products from development to production grade manufacturing operations. Identify the key areas that need to develop and improve for each product’s manufacturing processes.

REQUIRED QUALIFICATIONS

• Minimum of 7 years of progressive experience in advanced composite manufacturing and production environments (e.g., aerospace, defense, automotive, marine), including at least 3 years in a direct leadership or management capacity.
• Demonstrated mastery of ERP and MES systems, coupled with a deep, practical understanding and application of NPI (New Product Introduction) processes, Lean manufacturing principles, and change management (ECOs)
• Ability to transition products from development to production. Experience capturing key shop floor metrics (like OEE) and driving actions to improve them.
• Proven track record of success in employee development, coaching, and mentorship, cultivating high-performing teams.
• Exceptional verbal and written communication skills, combined with superior organizational abilities and meticulous attention to detail.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

PREFERRED QUALIFICATIONS

• Composite materials and fabrication processes (e.g., pre-preg layup, resin infusion, filament winding, autoclave curing, bonding, machining, pressed composites).
• Exceptional ability to interpret and apply complex technical documentation specific to composites (e.g., engineering drawings with ply schedules, fiber orientation, material specifications, cure cycles, vacuum bagging procedures, work instructions) to effectively troubleshoot composite manufacturing processes, tooling, and equipment.

What We Offer

• Competitive base salary with performance-based bonus potential

• 4 weeks of PTO

• Health, dental, and vision plans

• 401(k) retirement savings plan with employer match and planning resources

• Collaborative, team-based culture that fuels innovation

• Paid time off, holidays, and employee recognition programs celebrating your achievements

• Community engagement and STEM outreach opportunities to give back locally

Job Summary of the Sales Representative

The Sales Representative will work with the Area Managers to achieve sales revenue targets and grow market share for a specified territory by promoting, selling and servicing Axogen’s portfolio of nerve repair products. The Sales Rep will also practice good, ethical territory management in terms of organization, planning administration and expense planning and control. They need to increase sales and revenue by aggressively targeting and developing existing as well as new accounts. The Sales Rep will also train appropriate medical staff on Axogen products and procedures as well as meet expectations as defined by the Sales Management Team.

Job Requirements of the Sales Representative

• Bachelor’s degree required
• 2+ years sales experience; medical device experience preferred
• Computer literacy; good written and verbal communication skills
• Willing to travel as necessary
• Must reside in the territory

Job Responsibilities of the Sales Representative

The specific duties of the Sales Representative include but are not limited to:

• Develop and maintain accurate account and territory records
• Effectively manage time to ensure maximum coverage of targeted accounts within territory in order to achieve optimum level of exposure and results
• Develop and act on plans which identify growth opportunities within current and competitive customer accounts
• Manage field inventory to optimally balance availability of product with inventory costs
• Control and manage expenses in the most cost effective manner for the company
• Establish and maintain effective working relationships with internal/external key decision makers, customers and their staff, administrative staff, etc.
• Plan, implement and deliver effective sales/product presentations to customers, defining objectives and measuring success
• Probe to understand and confirm customers’ needs, handle objections and gain commitment
• Proactively develop knowledge, skills and abilities in all relevant areas i.e. clinical, technical, product and sales skills
• Participate in product and skill development programs and activities such as classroom education, role playing, on-th-job training, and other relevant activities that assist in the development of the team and yourself
• Adherence with all company policies and procedures i.e. Sunshine Act, AdvaMed, etc.
• Compliance with all safety standards, policies and regulations
• Compliance with all company policies, procedures and SOPs

Territory

#LI-AC1

Benefits/Compensation

Your Opportunity

Scion is paving a path in student living and the Facilities Technician is an integral part in the execution of our vision. This position responds to maintenance and repair service requests, carries out preventive maintenance tasks, prepares apartments for turnovers, and stays on top of requesting required supplies in a timely matter. The Facilities Technician ensures safety and functionality of the property’s buildings and equipment and ensures optimal service is provided to our customers.

The Facilities Technician is a solution-oriented professional who excels in a fast-paced, agile, collegiate environment. This role demands superior customer service and unwavering follow through.

Your Benefits

• FLSA Status Non-Exempt
• Discretionary annual bonus
• Paid Time Off + Floating holidays
• Health Insurance
• Dental Insurance
• Vision Insurance
• 401k Matching
• Paid Parental Leave
• Learning reimbursement opportunities

Your Responsibilities

• Maintain the physical condition of the property according to The Scion Group’s Standard Operating Procedures, OSHA and Industry
• Perform physically demanding work to maintain the asset, and other property features to minimize liability
• Execute maintenance objectives and daily assignments with the Facilities
• Perform minor and routine maintenance/repair in a timely and professional manner.
• Assist in assuring all service requests are completed
• Document work performed and parts used; and submit daily upon completion, including legible notes on what was done, the supplies used, further follow-up and materials needed, date and signature of
• Promote good public relations with residents, service staff, contractors, and management through great “people” attitude and resident
• Routinely perform duties including basic appliance repair, basic carpentry, plumbing/fixture repair, painting, and basic electric & lighting to make apartments ready on a timely basis, and ensure meeting completion dates set by the Facility Manager or Supervisor.
• Complete preventive maintenance tasks assigned to you.
• Clean coils and condensers, lubricate equipment, maintain air filters and perform minor repair work as
• Perform routine clean up at repair location or in maintenance shop, keeping working area clean and

The responsibilities listed above may not be all-inclusive.

What We Require

• High school/GED
• Certified Pool Operator (CPO), or intention to obtain within six months
• Clear and effective communication skills
• Knowledge of safety procedures with a safety conscious attitude, record of punctuality and dependability, ability to work with pressure of aggressive deadlines, and flexible schedule to accommodate after-hours and weekend emergencies
• Valid driver’s license
• Demonstrated ability to access computer programs and use or learn basic computer operations related to position requirements.
• Ability and willingness to travel when required
• Ability to stand 8 hours or longer per day and lift up to 100 lbs. as necessary

Operational Details

• Job location is at the assigned property. May be required to travel periodically.
• Serves in an “on-call” capacity, except during approved PTO periods.

The Scion Group LLC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, religion, creed, national origin, color, gender, sex, sexual orientation, gender identity or expression, age, physical or mental disability (as long as the employee/applicant is otherwise qualified for the job with or without a reasonable accommodation), genetic information, HIV/AIDS status, marital status, uniformed service, veteran status, pregnancy or other legally protected status or category under federal or state law. The Scion Group LLC complies with applicable state and local laws governing nondiscrimination in employment in all locations in which the Company has properties. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation, training and other terms and conditions of employment. The Scion Group LLC is committed to the principles of equal employment opportunities.

IND3 #wearehiring #werehiring

***This position is located in Raleigh, NC***

Your Opportunity

Scion is paving a path in student living and the Facilities Technician II is an integral part in the execution of our vision. This position responds to maintenance and repair service requests, carries out preventive maintenance tasks, prepares apartments for turnovers, and stays on top of requesting required supplies in a timely matter. The Facilities Technician II ensures safety and functionality of the property’s buildings and equipment and ensures optimal service is provided to our customers.

The Facilities Technician II is an experienced technician who excels in a fast-paced, agile, collegiate environment. This role demands superior problem solving, technical abilities and unwavering follow through.

Your Benefits

• FLSA Status Non-Exempt
• Discretionary annual bonus
• Paid Time Off + Floating Holidays
• Health Insurance
• Dental Insurance
• Vision Insurance
• 401k Matching
• Paid Parental Leave
• Learning reimbursement opportunities

Your Responsibilities

• Maintain the physical condition of the property according to The Scion Group’s Standard Operating Procedures, OSHA and Industry’s
• Perform physically demanding work to maintain the asset, and other property features to minimize liability
• Assume responsibility (as required) over operating, system monitoring/diagnostics, and preventative testing for major building systems.
• Operate system monitoring/diagnostics, preventative testing for life safety systems such as: fire pumps, fire alarm monitoring panels, dry/wet sprinkler systems, visual and audible alarms, back flow preventers, smoke detectors, CO2 sensors/alarms, fire extinguishers, emergency lighting, means of egress, and fire
• Assist in creating emergency and disaster preparedness plans and
• Maintain key management protocols and security, unlocking apartment doors and accompany/escort various vendors as
• Coordinate delivery and work schedules with vendors, contractors as approved by the Facilities Manager or Supervisor.
• Coordinate maintenance objectives and daily assignments with the Manager or
• Diagnose and perform routine maintenance/repair in a timely and professional
• Assure all service requests are completed

The responsibilities listed above may not be all-inclusive.

 What We Require

• High school/GED or trade school diploma and with minimum of 3-5 years of full-time general maintenance experience, or an equivalent combination
• HVAC certification/EPA 608 certification (Core, Type I, II & III)
• Certified Pool Operator (CPO), or intention to obtain within six months
• Clear and effective communication skills
• Knowledge of key management and security systems
• Knowledge of safety procedures with a safety conscious attitude, record of punctuality and dependability, ability to work with pressure of aggressive deadlines, and flexible schedule to accommodate after-hours and weekend emergencies
• Valid driver’s license
• Demonstrated ability to access computer programs and use or learn basic computer operations related to position requirements (ie. Entrata, CMMS, Building Automation system & Digital Control System)
• Ability and willingness to travel when required
• Ability to stand 8 hours or longer per day and lift up to 100 lbs. as necessary

Operational Details

• Job location is at the assigned property. May be required to travel periodically.
• Serves in an “on-call” capacity, except during approved PTO periods.

 The Scion Group LLC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, religion, creed, national origin, color, gender, sex, sexual orientation, gender identity or expression, age, physical or mental disability (as long as the employee/applicant is otherwise qualified for the job with or without a reasonable accommodation), genetic information, HIV/AIDS status, marital status, uniformed service, veteran status, pregnancy or other legally protected status or category under federal or state law. The Scion Group LLC complies with applicable state and local laws governing nondiscrimination in employment in all locations in which the Company has properties. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation, training and other terms and conditions of employment. The Scion Group LLC is committed to the principles of equal employment opportunities.

IND3 #wearehiring #werehiring 

***This position is located in Raleigh, NC***

Your Opportunity

Scion is paving a path in student living and the Facilities Technician II is an integral part in the execution of our vision. This position responds to maintenance and repair service requests, carries out preventive maintenance tasks, prepares apartments for turnovers, and stays on top of requesting required supplies in a timely matter. The Facilities Technician II ensures safety and functionality of the property’s buildings and equipment and ensures optimal service is provided to our customers.

The Facilities Technician II is an experienced technician who excels in a fast-paced, agile, collegiate environment. This role demands superior problem solving, technical abilities and unwavering follow through.

Your Benefits

• FLSA Status Non-Exempt
• Discretionary annual bonus
• Paid Time Off + Floating Holidays
• Health Insurance
• Dental Insurance
• Vision Insurance
• 401k Matching
• Paid Parental Leave
• Learning reimbursement opportunities

Your Responsibilities

• Maintain the physical condition of the property according to The Scion Group’s Standard Operating Procedures, OSHA and Industry’s
• Perform physically demanding work to maintain the asset, and other property features to minimize liability
• Assume responsibility (as required) over operating, system monitoring/diagnostics, and preventative testing for major building systems.
• Operate system monitoring/diagnostics, preventative testing for life safety systems such as: fire pumps, fire alarm monitoring panels, dry/wet sprinkler systems, visual and audible alarms, back flow preventers, smoke detectors, CO2 sensors/alarms, fire extinguishers, emergency lighting, means of egress, and fire
• Assist in creating emergency and disaster preparedness plans and
• Maintain key management protocols and security, unlocking apartment doors and accompany/escort various vendors as
• Coordinate delivery and work schedules with vendors, contractors as approved by the Facilities Manager or Supervisor.
• Coordinate maintenance objectives and daily assignments with the Manager or
• Diagnose and perform routine maintenance/repair in a timely and professional
• Assure all service requests are completed

The responsibilities listed above may not be all-inclusive.

 What We Require

• High school/GED or trade school diploma and with minimum of 3-5 years of full-time general maintenance experience, or an equivalent combination
• HVAC certification/EPA 608 certification (Core, Type I, II & III)
• Certified Pool Operator (CPO), or intention to obtain within six months
• Clear and effective communication skills
• Knowledge of key management and security systems
• Knowledge of safety procedures with a safety conscious attitude, record of punctuality and dependability, ability to work with pressure of aggressive deadlines, and flexible schedule to accommodate after-hours and weekend emergencies
• Valid driver’s license
• Demonstrated ability to access computer programs and use or learn basic computer operations related to position requirements (ie. Entrata, CMMS, Building Automation system & Digital Control System)
• Ability and willingness to travel when required
• Ability to stand 8 hours or longer per day and lift up to 100 lbs. as necessary

Operational Details

• Job location is at the assigned property. May be required to travel periodically.
• Serves in an “on-call” capacity, except during approved PTO periods.

 The Scion Group LLC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, religion, creed, national origin, color, gender, sex, sexual orientation, gender identity or expression, age, physical or mental disability (as long as the employee/applicant is otherwise qualified for the job with or without a reasonable accommodation), genetic information, HIV/AIDS status, marital status, uniformed service, veteran status, pregnancy or other legally protected status or category under federal or state law. The Scion Group LLC complies with applicable state and local laws governing nondiscrimination in employment in all locations in which the Company has properties. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation, training and other terms and conditions of employment. The Scion Group LLC is committed to the principles of equal employment opportunities.

IND3 #wearehiring #werehiring 

***This position is located in Raleigh, NC***

Your Opportunity

Scion is paving a path in student living and the Facilities Technician II is an integral part in the execution of our vision. This position responds to maintenance and repair service requests, carries out preventive maintenance tasks, prepares apartments for turnovers, and stays on top of requesting required supplies in a timely matter. The Facilities Technician II ensures safety and functionality of the property’s buildings and equipment and ensures optimal service is provided to our customers.

The Facilities Technician II is an experienced technician who excels in a fast-paced, agile, collegiate environment. This role demands superior problem solving, technical abilities and unwavering follow through.

Your Benefits

• FLSA Status Non-Exempt
• Discretionary annual bonus
• Paid Time Off + Floating Holidays
• Health Insurance
• Dental Insurance
• Vision Insurance
• 401k Matching
• Paid Parental Leave
• Learning reimbursement opportunities

Your Responsibilities

• Maintain the physical condition of the property according to The Scion Group’s Standard Operating Procedures, OSHA and Industry’s
• Perform physically demanding work to maintain the asset, and other property features to minimize liability
• Assume responsibility (as required) over operating, system monitoring/diagnostics, and preventative testing for major building systems.
• Operate system monitoring/diagnostics, preventative testing for life safety systems such as: fire pumps, fire alarm monitoring panels, dry/wet sprinkler systems, visual and audible alarms, back flow preventers, smoke detectors, CO2 sensors/alarms, fire extinguishers, emergency lighting, means of egress, and fire
• Assist in creating emergency and disaster preparedness plans and
• Maintain key management protocols and security, unlocking apartment doors and accompany/escort various vendors as
• Coordinate delivery and work schedules with vendors, contractors as approved by the Facilities Manager or Supervisor.
• Coordinate maintenance objectives and daily assignments with the Manager or
• Diagnose and perform routine maintenance/repair in a timely and professional
• Assure all service requests are completed

The responsibilities listed above may not be all-inclusive.

 What We Require

• High school/GED or trade school diploma and with minimum of 3-5 years of full-time general maintenance experience, or an equivalent combination
• HVAC certification/EPA 608 certification (Core, Type I, II & III)
• Certified Pool Operator (CPO), or intention to obtain within six months
• Clear and effective communication skills
• Knowledge of key management and security systems
• Knowledge of safety procedures with a safety conscious attitude, record of punctuality and dependability, ability to work with pressure of aggressive deadlines, and flexible schedule to accommodate after-hours and weekend emergencies
• Valid driver’s license
• Demonstrated ability to access computer programs and use or learn basic computer operations related to position requirements (ie. Entrata, CMMS, Building Automation system & Digital Control System)
• Ability and willingness to travel when required
• Ability to stand 8 hours or longer per day and lift up to 100 lbs. as necessary

Operational Details

• Job location is at the assigned property. May be required to travel periodically.
• Serves in an “on-call” capacity, except during approved PTO periods.

 The Scion Group LLC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, religion, creed, national origin, color, gender, sex, sexual orientation, gender identity or expression, age, physical or mental disability (as long as the employee/applicant is otherwise qualified for the job with or without a reasonable accommodation), genetic information, HIV/AIDS status, marital status, uniformed service, veteran status, pregnancy or other legally protected status or category under federal or state law. The Scion Group LLC complies with applicable state and local laws governing nondiscrimination in employment in all locations in which the Company has properties. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation, training and other terms and conditions of employment. The Scion Group LLC is committed to the principles of equal employment opportunities.

IND3 #wearehiring #werehiring 

Your Opportunity

Scion is paving a path in student living and the Facilities Technician II is an integral part in the execution of our vision. This position responds to maintenance and repair service requests, carries out preventive maintenance tasks, prepares apartments for turnovers, and stays on top of requesting required supplies in a timely matter. The Facilities Technician II ensures safety and functionality of the property’s buildings and equipment and ensures optimal service is provided to our customers.

The Facilities Technician II is an experienced technician who excels in a fast-paced, agile, collegiate environment. This role demands superior problem solving, technical abilities and unwavering follow through.

Your Benefits

• FLSA Status Non-Exempt
• Discretionary annual bonus
• Paid Time Off + Floating Holidays
• Health Insurance
• Dental Insurance
• Vision Insurance
• 401k Matching
• Paid Parental Leave
• Learning reimbursement opportunities

Your Responsibilities

• Maintain the physical condition of the property according to The Scion Group’s Standard Operating Procedures, OSHA and Industry’s
• Perform physically demanding work to maintain the asset, and other property features to minimize liability
• Assume responsibility (as required) over operating, system monitoring/diagnostics, and preventative testing for major building systems.
• Operate system monitoring/diagnostics, preventative testing for life safety systems such as: fire pumps, fire alarm monitoring panels, dry/wet sprinkler systems, visual and audible alarms, back flow preventers, smoke detectors, CO2 sensors/alarms, fire extinguishers, emergency lighting, means of egress, and fire
• Assist in creating emergency and disaster preparedness plans and
• Maintain key management protocols and security, unlocking apartment doors and accompany/escort various vendors as
• Coordinate delivery and work schedules with vendors, contractors as approved by the Facilities Manager or Supervisor.
• Coordinate maintenance objectives and daily assignments with the Manager or
• Diagnose and perform routine maintenance/repair in a timely and professional
• Assure all service requests are completed

The responsibilities listed above may not be all-inclusive.

 What We Require

• High school/GED or trade school diploma and with minimum of 3-5 years of full-time general maintenance experience, or an equivalent combination
• HVAC certification/EPA 608 certification (Core, Type I, II & III)
• Certified Pool Operator (CPO), or intention to obtain within six months
• Clear and effective communication skills
• Knowledge of key management and security systems
• Knowledge of safety procedures with a safety conscious attitude, record of punctuality and dependability, ability to work with pressure of aggressive deadlines, and flexible schedule to accommodate after-hours and weekend emergencies
• Valid driver’s license
• Demonstrated ability to access computer programs and use or learn basic computer operations related to position requirements (ie. Entrata, CMMS, Building Automation system & Digital Control System)
• Ability and willingness to travel when required
• Ability to stand 8 hours or longer per day and lift up to 100 lbs. as necessary

Operational Details

• Job location is at the assigned property. May be required to travel periodically.
• Serves in an “on-call” capacity, except during approved PTO periods.

 The Scion Group LLC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, religion, creed, national origin, color, gender, sex, sexual orientation, gender identity or expression, age, physical or mental disability (as long as the employee/applicant is otherwise qualified for the job with or without a reasonable accommodation), genetic information, HIV/AIDS status, marital status, uniformed service, veteran status, pregnancy or other legally protected status or category under federal or state law. The Scion Group LLC complies with applicable state and local laws governing nondiscrimination in employment in all locations in which the Company has properties. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation, training and other terms and conditions of employment. The Scion Group LLC is committed to the principles of equal employment opportunities.

IND3 #wearehiring #werehiring 

Your Opportunity

Scion is paving a path in student living and the Facilities Technician is an integral part in the execution of our vision. This position responds to maintenance and repair service requests, carries out preventive maintenance tasks, prepares apartments for turnovers, and stays on top of requesting required supplies in a timely matter. The Facilities Technician ensures safety and functionality of the property’s buildings and equipment and ensures optimal service is provided to our customers.

The Facilities Technician is a solution-oriented professional who excels in a fast-paced, agile, collegiate environment. This role demands superior customer service and unwavering follow through.

Your Benefits

• FLSA Status Non-Exempt
• Discretionary annual bonus
• Paid Time Off + Floating holidays
• Health Insurance
• Dental Insurance
• Vision Insurance
• 401k Matching
• Paid Parental Leave
• Learning reimbursement opportunities

Your Responsibilities

• Maintain the physical condition of the property according to The Scion Group’s Standard Operating Procedures, OSHA and Industry
• Perform physically demanding work to maintain the asset, and other property features to minimize liability
• Execute maintenance objectives and daily assignments with the Facilities
• Perform minor and routine maintenance/repair in a timely and professional manner.
• Assist in assuring all service requests are completed
• Document work performed and parts used; and submit daily upon completion, including legible notes on what was done, the supplies used, further follow-up and materials needed, date and signature of
• Promote good public relations with residents, service staff, contractors, and management through great “people” attitude and resident
• Routinely perform duties including basic appliance repair, basic carpentry, plumbing/fixture repair, painting, and basic electric & lighting to make apartments ready on a timely basis, and ensure meeting completion dates set by the Facility Manager or Supervisor.
• Complete preventive maintenance tasks assigned to you.
• Clean coils and condensers, lubricate equipment, maintain air filters and perform minor repair work as
• Perform routine clean up at repair location or in maintenance shop, keeping working area clean and

The responsibilities listed above may not be all-inclusive.

What We Require

• High school/GED
• Certified Pool Operator (CPO), or intention to obtain within six months
• Clear and effective communication skills
• Knowledge of safety procedures with a safety conscious attitude, record of punctuality and dependability, ability to work with pressure of aggressive deadlines, and flexible schedule to accommodate after-hours and weekend emergencies
• Valid driver’s license
• Demonstrated ability to access computer programs and use or learn basic computer operations related to position requirements.
• Ability and willingness to travel when required
• Ability to stand 8 hours or longer per day and lift up to 100 lbs. as necessary

Operational Details

• Job location is at the assigned property. May be required to travel periodically.
• Serves in an “on-call” capacity, except during approved PTO periods.

The Scion Group LLC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, religion, creed, national origin, color, gender, sex, sexual orientation, gender identity or expression, age, physical or mental disability (as long as the employee/applicant is otherwise qualified for the job with or without a reasonable accommodation), genetic information, HIV/AIDS status, marital status, uniformed service, veteran status, pregnancy or other legally protected status or category under federal or state law. The Scion Group LLC complies with applicable state and local laws governing nondiscrimination in employment in all locations in which the Company has properties. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation, training and other terms and conditions of employment. The Scion Group LLC is committed to the principles of equal employment opportunities.

IND3 #wearehiring #werehiring 

Your Opportunity

Scion is paving a path in student living and the Facilities Technician II is an integral part in the execution of our vision. This position responds to maintenance and repair service requests, carries out preventive maintenance tasks, prepares apartments for turnovers, and stays on top of requesting required supplies in a timely matter. The Facilities Technician II ensures safety and functionality of the property’s buildings and equipment and ensures optimal service is provided to our customers.

The Facilities Technician II is an experienced technician who excels in a fast-paced, agile, collegiate environment. This role demands superior problem solving, technical abilities and unwavering follow through.

Your Benefits

• FLSA Status Non-Exempt
• Discretionary annual bonus
• Paid Time Off + Floating Holidays
• Health Insurance
• Dental Insurance
• Vision Insurance
• 401k Matching
• Paid Parental Leave
• Learning reimbursement opportunities

Your Responsibilities

• Maintain the physical condition of the property according to The Scion Group’s Standard Operating Procedures, OSHA and Industry’s
• Perform physically demanding work to maintain the asset, and other property features to minimize liability
• Assume responsibility (as required) over operating, system monitoring/diagnostics, and preventative testing for major building systems.
• Operate system monitoring/diagnostics, preventative testing for life safety systems such as: fire pumps, fire alarm monitoring panels, dry/wet sprinkler systems, visual and audible alarms, back flow preventers, smoke detectors, CO2 sensors/alarms, fire extinguishers, emergency lighting, means of egress, and fire
• Assist in creating emergency and disaster preparedness plans and
• Maintain key management protocols and security, unlocking apartment doors and accompany/escort various vendors as
• Coordinate delivery and work schedules with vendors, contractors as approved by the Facilities Manager or Supervisor.
• Coordinate maintenance objectives and daily assignments with the Manager or
• Diagnose and perform routine maintenance/repair in a timely and professional
• Assure all service requests are completed

The responsibilities listed above may not be all-inclusive.

 What We Require

• High school/GED or trade school diploma and with minimum of 3-5 years of full-time general maintenance experience, or an equivalent combination
• HVAC certification/EPA 608 certification (Core, Type I, II & III)
• Certified Pool Operator (CPO), or intention to obtain within six months
• Clear and effective communication skills
• Knowledge of key management and security systems
• Knowledge of safety procedures with a safety conscious attitude, record of punctuality and dependability, ability to work with pressure of aggressive deadlines, and flexible schedule to accommodate after-hours and weekend emergencies
• Valid driver’s license
• Demonstrated ability to access computer programs and use or learn basic computer operations related to position requirements (ie. Entrata, CMMS, Building Automation system & Digital Control System)
• Ability and willingness to travel when required
• Ability to stand 8 hours or longer per day and lift up to 100 lbs. as necessary

Operational Details

• Job location is at the assigned property. May be required to travel periodically.
• Serves in an “on-call” capacity, except during approved PTO periods.

 The Scion Group LLC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, religion, creed, national origin, color, gender, sex, sexual orientation, gender identity or expression, age, physical or mental disability (as long as the employee/applicant is otherwise qualified for the job with or without a reasonable accommodation), genetic information, HIV/AIDS status, marital status, uniformed service, veteran status, pregnancy or other legally protected status or category under federal or state law. The Scion Group LLC complies with applicable state and local laws governing nondiscrimination in employment in all locations in which the Company has properties. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation, training and other terms and conditions of employment. The Scion Group LLC is committed to the principles of equal employment opportunities.

IND3 #wearehiring #werehiring 

Your Opportunity

Scion is paving a path in student living and the Facilities Technician II is an integral part in the execution of our vision. This position responds to maintenance and repair service requests, carries out preventive maintenance tasks, prepares apartments for turnovers, and stays on top of requesting required supplies in a timely matter. The Facilities Technician II ensures safety and functionality of the property’s buildings and equipment and ensures optimal service is provided to our customers.

The Facilities Technician II is an experienced technician who excels in a fast-paced, agile, collegiate environment. This role demands superior problem solving, technical abilities and unwavering follow through.

Your Benefits

• FLSA Status Non-Exempt
• Discretionary annual bonus
• Paid Time Off + Floating Holidays
• Health Insurance
• Dental Insurance
• Vision Insurance
• 401k Matching
• Paid Parental Leave
• Learning reimbursement opportunities

Your Responsibilities

• Maintain the physical condition of the property according to The Scion Group’s Standard Operating Procedures, OSHA and Industry’s
• Perform physically demanding work to maintain the asset, and other property features to minimize liability
• Assume responsibility (as required) over operating, system monitoring/diagnostics, and preventative testing for major building systems.
• Operate system monitoring/diagnostics, preventative testing for life safety systems such as: fire pumps, fire alarm monitoring panels, dry/wet sprinkler systems, visual and audible alarms, back flow preventers, smoke detectors, CO2 sensors/alarms, fire extinguishers, emergency lighting, means of egress, and fire
• Assist in creating emergency and disaster preparedness plans and
• Maintain key management protocols and security, unlocking apartment doors and accompany/escort various vendors as
• Coordinate delivery and work schedules with vendors, contractors as approved by the Facilities Manager or Supervisor.
• Coordinate maintenance objectives and daily assignments with the Manager or
• Diagnose and perform routine maintenance/repair in a timely and professional
• Assure all service requests are completed

The responsibilities listed above may not be all-inclusive.

 What We Require

• High school/GED or trade school diploma and with minimum of 3-5 years of full-time general maintenance experience, or an equivalent combination
• HVAC certification/EPA 608 certification (Core, Type I, II & III)
• Certified Pool Operator (CPO), or intention to obtain within six months
• Clear and effective communication skills
• Knowledge of key management and security systems
• Knowledge of safety procedures with a safety conscious attitude, record of punctuality and dependability, ability to work with pressure of aggressive deadlines, and flexible schedule to accommodate after-hours and weekend emergencies
• Valid driver’s license
• Demonstrated ability to access computer programs and use or learn basic computer operations related to position requirements (ie. Entrata, CMMS, Building Automation system & Digital Control System)
• Ability and willingness to travel when required
• Ability to stand 8 hours or longer per day and lift up to 100 lbs. as necessary

Operational Details

• Job location is at the assigned property. May be required to travel periodically.
• Serves in an “on-call” capacity, except during approved PTO periods.

 The Scion Group LLC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, religion, creed, national origin, color, gender, sex, sexual orientation, gender identity or expression, age, physical or mental disability (as long as the employee/applicant is otherwise qualified for the job with or without a reasonable accommodation), genetic information, HIV/AIDS status, marital status, uniformed service, veteran status, pregnancy or other legally protected status or category under federal or state law. The Scion Group LLC complies with applicable state and local laws governing nondiscrimination in employment in all locations in which the Company has properties. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation, training and other terms and conditions of employment. The Scion Group LLC is committed to the principles of equal employment opportunities.

IND3 #wearehiring #werehiring 

Your Opportunity

Scion is paving a path in student living and the Facilities Manager is a keystone team member in the execution of our vision. This position ensures safety and functionality of the property’s buildings and equipment and ensures optimal service is carried out by the onsite Facilities team and any third-party vendors.

The Facilities Manager is a subject matter expert and experienced leader who excels in a fast-paced, agile, collegiate environment. This role demands superior problem solving, leadership and unwavering follow through. Those in the Facilities Manager position may also be asked to assist other properties.

Your Benefits

• FLSA Status Exempt
• Discretionary annual bonus
• Paid Time Off + Floating Holidays
• Health Insurance
• Dental Insurance
• Vision Insurance
• 401k Matching
• Paid Parental Leave
• Learning reimbursement opportunities

Your Responsibilities 

• Manage all building services and preventative maintenance programs to the best of industries practices, the Scion’s Standard Operating Procedures, and in compliance with the State/Federal Govt./OSHA’s Codes/regulations.
• Manage the day-to-day operations including but not limited to heating, ventilating, air conditioning (HVAC), plumbing and piping, fire protection, and general building maintenance and troubleshooting, building automation systems and building maintenance
• Monitor systems and provides diagnostics, preventative maintenance, annual testing, permitting, certification for all major building systems including, but not limited to: chilled water systems with fan coil units, air handling units with outside condensers including roof top units (RTU), building stationary boilers, hot & cold water distribution systems (plumbing, pressure/pneumatic/storage tanks, variable frequency drive (and pumps & motors), domestic hot water heaters, building automation systems (BAS), electrical distribution systems, switchgears and controls, generators, uninterrupted Power supply (UPS), elevators and lifts, parking structures (ventilation/drainage Systems, T-Joints), entrance & exit Gates and overhead doors, shingled/tarred roof, TPO membrane roofing system, EIFS, brick, vinyl, & cementitious sideboard, ACP, curtain walls, insulated glass units (IGUs).
• Operate and manage all life safety systems including fire pumps, fire alarm monitoring panels, dry/wet sprinkler systems, visual and audible alarms, back flow preventers, smoke detectors, CO2 sensors/alarms, fire extinguishers, emergency lighting, means of egress, fire
• Prioritize and schedule maintenance work, assuring quality of work consistent with Scion’s standards.
• Manage the Facilities Technicians to ensure all service requests are completed within Scion standards and are appropriately and accurately
• Manage facilities budgets.
• Review completed work to verify conformance to standards or repair
• Ensure all emergency, routine maintenance/repairs are carried out in a timely and professional manner.
• Ensure all Preventive maintenance is carried out in a timely and professional manner.
• Respond promptly and effectively to all safety/risk-management-related issues at the
• Review completed work orders for accuracy of labor hours, materials’ cost, and track recurring equipment failures.
• Conduct regular inspection tours of buildings, interior common areas and the exterior of the property, equipment and surrounding grounds for deficiencies, potential safety, health, or code problems and necessary
• Prepare written reports summarizing findings, and advises other building users as appropriate, of the
• Provide recommendations for dealing with problems noticed in
• Oversee and supervise “Turn” preparation including the prompt inspection of vacated units, makes appropriate repairs and charges, and ensures completion as
• Inspect vacant units after repairs and maintenance have been completed to determine quality of work performed and readiness for
• Manage the maintenance spare parts and the tools inventory, determining which parts/tools to stock and their stock level and working directly with General Manager to maintain inventory of parts, tools, and supplies within
• Maintain shop appearance and all mechanical, supply, electrical and storage facilities on
• Ensure proper maintenance of equipment to ensure warranty compliance and extended useful life.
• Oversee all other contracted work in the building, obtaining bids and negotiating prices with vendors and contractors, as approved by the General Manager, Regional Manager or the Regional Facility Manager.
• Coordinate deliveries, schedules, and performance of all facility related
• Ensure proper safety procedures are followed, personal protective equipment is used, and health & safety policies are
• Manage process for keying and coring/coding of locks and maintain lock procedures, logbooks and protocols for key management and
• Effectively implement standard operating procedures and preventive maintenance programs according to Scion’s
• Take part in emergency preparedness planning and acts as essential personnel in
• Escalate unique or urgent repairs/replacements to General Manager and Regional Facilities Manager.
• Maintain records on all major systems including maintenance manuals, manufacturer’s cut sheets, warranties, and equipment
• Work closely with the General Manager and Regional Facilities Manager to manage, formulate and track facilities and capital
• Hire, train and develop Facilities team members, holding them accountable for delivering a high level of

The responsibilities listed above may not be all-inclusive.

What We Require

• High school diploma/GED, trade school diploma, or military training
• 8 years of relevant experience managing building system in multi-unit residential properties, 5 years of supervisory experience
• 5 years’ experience with building automation systems, and life safety systems
• EPA 608 Universal certification
• HVAC/EPA 608 Universal certification
• Certified Pool Operator (CPO), or intention to obtain within six months
• Expertise in plumbing, HVAC, electrical and mechanical systems as well as generally accepted maintenance practices
• Boiler operator or Stationary Engineer Certificate/License
• Ability to read and interpret documents such as design drawings, blueprints, safety guidelines, operating and maintenance instructions and procedural manuals
• Ability to manage multiple projects simultaneously, set priorities and meet deadlines
• Basic computer working knowledge, including Microsoft Office and CMMS
• Valid driver’s license
• Ability to stand 8 hours or longer per day and lift up to 100 lbs. as necessary

 Operational Details

• Job location is at the assigned property. May be required to travel periodically.
• Serves in an “on-call” capacity, except during approved PTO periods.

The Scion Group LLC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, religion, creed, national origin, color, gender, sex, sexual orientation, gender identity or expression, age, physical or mental disability (as long as the employee/applicant is otherwise qualified for the job with or without a reasonable accommodation), genetic information, HIV/AIDS status, marital status, uniformed service, veteran status, pregnancy or other legally protected status or category under federal or state law. The Scion Group LLC complies with applicable state and local laws governing nondiscrimination in employment in all locations in which the Company has properties. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation, training and other terms and conditions of employment. The Scion Group LLC is committed to the principles of equal employment opportunities.

IND3 #wearehiring #werehiring 

Your Opportunity

Scion is paving a path in student living and the Facilities Lead is a keystone team member in the execution of our vision. This position ensures safety and functionality of the property’s buildings and equipment and ensures optimal service is conducted by the onsite Facilities team and any third-party vendors.

The Facilities Lead is a subject matter expert and experienced leader who excels in a fast-paced, agile, collegiate environment. This role demands superior problem solving, leadership and unwavering follow through. Those in the Facilities Lead position may also be asked to assist other properties.

Your Benefits

• FLSA Status Non-exempt
• Discretionary annual bonus
• Paid Time Off
• Health Insurance
• Dental Insurance 
• Vision Insurance
• 401k Matching
• Paid Maternity Leave

Your Responsibilities 

• Supervise all building services and preventative maintenance programs to the best of industries practices, the Scion’s Standard Operating Procedures, and in compliance with the State/Federal Govt./OSHA’s Codes/regulations.
• Supervise the day-to-day operations including but not limited to heating, ventilating, air conditioning (HVAC), plumbing and piping, fire protection, and general building maintenance.
• Monitor systems and provides diagnostics, preventative maintenance, annual testing, permitting, certification for all major building systems.
• Operate and manage all life safety systems including fire pumps, fire alarm monitoring panels, dry/wet sprinkler systems, visual and audible alarms, back flow preventers, smoke detectors, CO2 sensors/alarms, fire extinguishers, emergency lighting, means of egress, fire
• Prioritize and schedule maintenance work, assuring quality of work consistent with Scion’s standards.
• Supervise the Facilities Technicians to ensure all service requests are completed within Scion standards and are appropriately and accurately
• Review completed work to verify conformance to standards or repair
• Ensure all emergency, routine maintenance/repairs are carried out in a timely and professional manner.
• Ensure all Preventive maintenance is carried out in a timely and professional manner.
• Respond promptly and effectively to all safety/risk-management-related issues at the
• Review completed work orders for accuracy of labor hours, materials’ cost, and track recurring equipment failures.
• Conduct regular inspection tours of buildings, interior common areas and the exterior of the property, equipment and surrounding grounds for deficiencies, potential safety, health, or code problems and necessary
• Provide recommendations for dealing with problems noticed in
• Oversee and supervise “Turn” preparation including the prompt inspection of vacated units, makes appropriate repairs and charges, and ensures completion as
• Inspect vacant units after repairs and maintenance have been completed to determine quality of work performed and readiness for
• Oversee the maintenance spare parts and the tools inventory, determining which parts/tools to stock and their stock level and working directly with General Manager to maintain inventory of parts, tools, and supplies within
• Maintain shop appearance and all mechanical, supply, electrical and storage facilities on
• Ensure proper maintenance of equipment to ensure warranty compliance and extended useful life.
• Oversee all other contracted work in the building, obtaining bids and negotiating prices with vendors and contractors, as approved by the General Manager, Regional Manager and Regional Facility Manager.
• Coordinate deliveries, schedules, and performance of all facility related
• Ensure proper safety procedures are followed, personal protective equipment is used, and health & safety policies are
• Manage process for keying and coring/coding of locks and maintain lock procedures, logbooks and protocols for key management and
• Effectively implement standard operating procedures and preventive maintenance programs according to Scion’s
• Take part in emergency preparedness planning and acts as essential personnel in
• Escalate unique or urgent repairs/replacements to General Manager and Regional Facilities Manager.
• Maintain records on all major systems including maintenance manuals, manufacturer’s cut sheets, warranties, and equipment
• Work closely with the General Manager and Regional Facilities Manager to manage, formulate and track facilities and capital
• Hire, train and develop Facilities team members, holding them accountable for delivering a high level of

The responsibilities listed above may not be all-inclusive.

What We Require

• High school diploma/GED, trade school diploma, or military training
• 5 years of relevant experience managing building system in multi-unit residential properties, 2 years of supervisory experience
• EPA 608 Universal certification
• HVAC/EPA 608 Universal certification
• Certified Pool Operator (CPO), or intention to obtain within six months
• Expertise in plumbing, HVAC, electrical and mechanical systems as well as generally accepted maintenance practices
• Ability to read and interpret documents such as design drawings, blueprints, safety guidelines, operating and maintenance instructions and procedural manuals
• Ability to manage multiple projects simultaneously, set priorities and meet deadlines
• Basic computer working knowledge, including Microsoft Office
• Valid driver’s license
• Ability to stand 8 hours or longer per day and lift up to 100 lbs. as necessary

 Operational Details

• Job location is at the assigned property. May be required to travel periodically.
• Serves in an “on-call” capacity, except during approved PTO periods.

The Scion Group LLC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, religion, creed, national origin, color, gender, sex, sexual orientation, gender identity or expression, age, physical or mental disability (as long as the employee/applicant is otherwise qualified for the job with or without a reasonable accommodation), genetic information, HIV/AIDS status, marital status, uniformed service, veteran status, pregnancy or other legally protected status or category under federal or state law. The Scion Group LLC complies with applicable state and local laws governing nondiscrimination in employment in all locations in which the Company has properties. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation, training and other terms and conditions of employment. The Scion Group LLC is committed to the principles of equal employment opportunities.

IND3 #wearehiring #werehiring full-time / full time

The Solutions Engineer Team

We believe Solutions Engineers at Okta are involved in all stages of the customer’s digital transformation.  Solutions Engineers are experienced in using presentations, email, phone, and social media to connect with customers virtually and in person. We are looking for great teammates who can build and deliver sales presentations and customized product demonstrations to educate Okta’s Customers (from developers to product managers to C-level executives) on best practices throughout their cloud security technology journey. 

We believe Okta’s Solutions Engineers empathize with Customers and quickly discern their true technical needs by asking detailed, clarifying questions while presenting solutions that specifically address those needs. Okta Solution Engineers have the rare combination of technical acumen and business insight; in a career where you can utilize both. As a Solutions Engineer at Okta, you will further develop each of these skills by advising a diverse set of customers on the value they will gain by using Okta’s Identity Platform.

The Solutions Engineer Opportunity

Reporting to the Senior Manager, Solutions Engineers, this Senior Solutions Engineer (Okta) will partner with Commercial Account Executives. As a Senior Solutions Engineer at Okta, you will be the technical lead in all stages of the customer lifecycle. You will focus on delivering customer value by aligning customer requirements to business results enabled by Okta solutions. You will contribute to account and opportunity strategies and, collaboratively, demonstrate the value of Okta solutions through presentations, whiteboard sessions, and proof-of-concept demonstrations.

What You’ll Do

As a Senior Solutions Engineer, you’ll be a strategic technical expert for a customer-facing sales team. You'll use your skills to:

• Work alongside the Corporate/Expansion (employee size 300-1249) sales team as the technical and domain expert of a customer-facing sales team to help Customers understand the value of Okta’s solutions
• Serve as a technical advisor: Partner with the sales team to educate customers on Okta’s identity solutions and demonstrate their value.
• Solve customer challenges: Understand customer needs and provide tailored product demonstrations to show how our solutions can solve their business problems.
• Lead technical engagements: Answer product and technical questions, and plan and deliver complex Proofs of Concept (POCs) by collaborating with other Okta engineering teams.
• Drive product and knowledge growth: Share customer feedback with our product teams to influence future enhancements and contribute to the team's knowledge by sharing best practices and reusable assets.
• Stay ahead of the curve: Keep up with competitive analysis and market differentiation to better position Okta.
• Support company events: Represent Okta at marketing events, including conferences, user groups, and trade shows.

What You’ll Bring

• Experience: 8+ years of experience in pre-sales engineering and solution selling, with a strong background in Enterprise account segments.
• Technical Acumen:
• Deep understanding of identity protocols (e.g., SAML, OIDC, OAuth, FIDO, Passkeys, SCIM, LDAP).
• Working knowledge of cloud platforms like AWS, Azure/Entra, and GCP.
• Experience with REST APIs and SDKs.
• Hands-on experience in one or more of the following: front-end web development, back-end development, scripting (Bash, PowerShell), or DevOps (Docker, Kubernetes).
• Understanding of identity-related cybersecurity topics (e.g., phishing, MFA bypass attacks, privilege escalation).
• Communication & Presentation Skills: The ability to simplify complex technical concepts and deliver compelling presentations to diverse audiences, from developers to C-level executives. You should be skilled at diagramming user journeys and complex architecture.
• Strategic Mindset: Proven skills in territory management, including building pipelines and collaborating with sales counterparts.
• Travel: Ability to travel up to 25% of the time.
• A bachelor's degree in Engineering, Computer Science, MIS, or a comparable field is preferred.

Bonus Skills (Ideally, You Have)

• Experience in the IAM space
• Hands-on knowledge of Identity Governance (IGA) or Privileged Access Management (PAM) solutions.
• Practical experience with Windows Server, Active Directory, LDAP, and Federation services.

You might also have (not mandatory):

• AI & Emerging Tech: Expertise with Agentic AI and LLM-based workflows. You understand the use cases for AI agents, both internal and external, and have familiarity with MCP servers.
• Diagramming experience for user journey flows, complex architecture diagrams, etc.

#LI-Remote

#LI-CM

P10563_3394826

The Solutions Engineer Team

We believe Solutions Engineers at Okta are involved in all stages of the customer’s digital transformation.  Solutions Engineers are experienced in using presentations, email, phone, and social media to connect with customers virtually and in person. We are looking for great teammates who can build and deliver sales presentations and customized product demonstrations to educate Okta’s Customers (from developers to product managers to C-level executives) on best practices throughout their cloud security technology journey. We believe Okta’s Solutions Engineers empathize with Customers and quickly discern their true technical needs by asking detailed, clarifying questions while presenting solutions that specifically address those needs. Okta Solution Engineers have the rare combination of technical acumen and business insight; in a career where you can utilize both. As a Solutions Engineer at Okta, you will further develop each of these skills by advising a diverse set of customers on the value they will gain by using Okta’s Identity Platform.

The Solutions Engineer Opportunity

Reporting to the Senior Manager, Solutions Engineering, the Solutions Engineer is a functional business consultant who will partner with Commercial Account Executives and have  a passion for technology and the advanced ability to develop, position, and demonstrate product-specific solutions during sales cycles, while achieving quarterly and annual sales goals for an assigned territory.

What you’ll be doing

• Work alongside the Corporate/Expansion (employee size 300-1249) sales team as the technical and domain expert of a customer-facing sales team to help Customers understand the value of Okta’s solutions
• Understand customer challenges and business issues, and provide product demonstrations to align our solutions with customer needs
• Answer product feature and technical questions from customers, partners, and Okta colleagues
• Plan and deliver Proof Of Concepts for customers who have more complex use cases, collaborating with other Okta engineering teams as needed
• Provide feedback to product management about product enhancements that can address customer needs and provide additional value
• Share and learn best practices and reusable assets with other Solutions Engineers to enhance the quality and efficiency of the team
• Stay current on competitive analysis and market differentiation
• Support marketing events, including executive briefings, conferences, user groups, and trade shows

What you’ll bring to the role

• 5+ years of pre-sales engineering experience, selling SaaS products.
• A passion to serve the Customer, demonstrated in a customer-facing role, such as consulting or support, but ideally in a pre-sales capacity.
• An ability to quickly communicate complex ideas around a technical topic, ideally on the fly, using a whiteboard.
• Experience with at least one standard network security protocol. (eg. OAuth, OAuth2, SAML, LDAP)
• Hands-on experience in one or more of the following areas: web (JavaScript, HTML, frontend frameworks) development, mobile (iOS, Android) development, backend (Java, C#, Node.js, Python, PHP, Ruby) development, IP-based real-time communications.
• An understanding of core security concerns within a typical application. (password hashing, SSL/TLS, encryption at rest, XSS, XSRF)
• Exceptional communicator.
• Confidently dispensing knowledge to highly-skilled and experienced audiences.
• Typically, 25% travel.
• A bachelor's degree in Engineering, Computer Science, MIS, or a comparable field is preferred.

You might also have (not mandatory):

• AI & Emerging Tech: Expertise with Agentic AI and LLM-based workflows. You understand the use cases for AI agents, both internal and external, and have familiarity with MCP servers.
• Diagramming experience for user journey flows, complex architecture diagrams, etc.
• Experience in the IAM space

#LI-Remote

#LI-CM

P9259_3401412

Responsibilities

Qualifications

VSC Fire & Security in Charlotte, North Carolina is seeking candidates for the position of Sprinkler Designer II.

 What we offer:

• Excellent pay $35.00 - $45.00 and up based on experience
• Overtime eligible
• Paid vacation and company holidays
• Medical, dental and vision insurance options for you and your family
• Health Savings Account (HSA) or Flexible Spending Account (FSA)
• Company paid life insurance for full time employees
• Employee apparel program
• Company paid long term disability insurance
• Bonus for referring new employees
• Parental leave for full-time employees
• Employee Assistance Program (EAP)
• Boot Allowance
• NICET certification test reimbursement
• Opportunities for training and advancement
• All needed Personal Protective Equipment (PPE) provided

What you need:

• Three to five years of experience with AutoCAD or SprinkCAD or background in mathematics.
• Ability to review architectural drawings, mechanical, site, structural and complete site surveys, and research essential information as required for structural and mechanical elements.
• Integrate other mechanical systems to ensure successful coordination with the fire suppression system and must be able to recognize potential conflicts with other trades.
• Ability to exercise a high level of autonomy in organizing, planning, and prioritizing multiple projects to meet individual deadlines with exceptional attention to detail and communication skills.
• Monitor and enforce safety policies and procedures.
• Ability to pass various background checks.
• Reliable transportation, valid State Driver's License with acceptable driving record for use of company vehicle.
• Desirable (but not required):
  • NICET Level III or IV, or equivalent experience.
  • Associate or bachelor’s degree in drafting (AutoCAD).
  • Texas Candidates: RME-G

 What you will do:

• Design, coordinate, and submit Fire Protection drawings, hydraulic calculations, seismic brace calculations, and material/equipment schedules. Stock list projects for fabrication and approve fabrication quotes.
• Integrate other mechanical systems to ensure successful coordination with the fire suppression system and must be able to recognize potential conflicts with other trades.
• Ensure compliance with NFPA standards and insurance requirements as well as all fire and building code requirements.
• Provide updates to purchasing as installation schedule or change orders require modifications to meet installation schedule and deadlines and other requirements.
• Communicate with Design Manager and Field Superintendent to review design, installation and testing of devices and systems throughout the project.
• Produce shop list utilizing computer software for fabrication of system piping.
• Assist and fill in for Design Manager and help train less experienced designers as necessary.
• Responsible for the layout of sprinkler system drawings utilizing available information from the contract's defined scope of the project, architectural drawings, job specifications, site surveys, and relevant NFPA, IBC, and local building codes.
• Responsible for all aspects of the design layout, field checking, fabrication listing, material equipment submittals, hydraulic calculations, applicable installation requirements, and close out procedures.
• Maintain proper Risk Management and Safety procedures on all job sites per VSC policies.

ABOUT THE JOB

Anduril’s Planning team is seeking a world-class Senior Master Scheduler, S&OP Planning (internally known at Anduril as Senior Demand & Supply Planner) to join our team. The Senior Master Scheduler, S&OP Planning has an integral role at Anduril, having material flow responsibility throughout the entire value chain, from raw materials to finished goods shipped to customers. They will have full ownership of certain assemblies and product lines, and will be ultimately responsible for sending the correct signals to Purchasing and Manufacturing on what and when to buy or build. This hire will be instrumental in signaling and forecasting accurate demand, planning inventory levels, and ensuring that Anduril supports its hardware requirements via Enterprise Resource Planning (ERP) software and other associated tools.

The right person for this role has demonstrated ownership and experience solving complex operational challenges with creative solutions in a fast-paced, resource-limited environment. This person will be flexible to provide support wherever needed to ensure products are built and shipped under stringent quality standards. If you are someone who thrives in such an environment, then this role is for you!

WHAT YOU'LL DO

• Manage day-to-day demand signaling, ordering, and inventory for various product lines.
• Identify and resolve supply issues by collaborating with Engineering, Purchasing, and Manufacturing teams.
• Lead Sales and Operations Planning (S&OP) discussions for Supply Planning on designated product lines.
• Work with Business Development and Growth teams to align forecasts with actual demand plans.
• Report on and analyze supply and material health to inform key decisions for Engineering, Purchasing, Manufacturing, and Business Development.
• Develop and maintain processes within MRP systems and associated master data.
• Drive strategic initiatives towards best practices, including demand shaping, advanced modeling, and inventory optimization.

REQUIRED QUALIFICATIONS

• Bachelor’s degree in a technical field (i.e. manufacturing, engineering, analytics, computer science, etc.) or business field (i.e. finance, economics, supply chain management, business administration, marketing, etc.)
• 6+ years of experience in a supply chain or production role within a fast-paced manufacturing environment with complex mechanical and/or electrical assemblies.
• Complete ownership of a complex value chain, coordinating between multiple internal and internal parties to ensure on-time deliveries and adherence to quality standards.
• Technical expertise including ability to read technical documentation and understanding hardware manufacturing processes.
• Experience with ERP systems such as Oracle, Netsuite, and CRM systems like Salesforce.
• Ability to travel up to 10% of the time.
• Ability to relocate, if not already local to be onsite in Morrisville, NC.

PREFERRED QUALIFICATIONS

• Master’s degree or other higher education.
• 8+ years of experience in a supply chain or production role within a fast-paced manufacturing environment with complex mechanical and/or electrical assemblies.
• Strong experience with SQL databases, including building custom queries for production and inventory metrics.
• Proficiency in data analysis and reporting tools such as Tableau, Power BI, or Qlikview.
• Knowledge of supply chain planning systems like Blue Yonder and best practices in demand planning, inventory management, and S&OP.
• Experience with lean manufacturing, continuous improvement, six sigma principles, and big data evaluation techniques.
• Proactive, able to take substantial responsibility across various functions, with a focus on speed and accuracy.
• Ability to obtain and maintain a U.S. TS clearance

Anduril’s Manufacturing team is seeking a Senior Industrial Engineer to join our Composites Manufacturing team in North Carolina. This team engineers the manufacturing solution to turn designs into prototypes rapidly, and subsequently transitions composites manufacturing projects from development into full-rate production. In this role, you will use industrial engineering tools and skills to increase efficiency and quality of each manufacturing line in concert with its production plan. You will leverage a data-driven approach to design and improve production lines and manufacturing processes. Since manufacturing is the outcome that all other business functions have in common, you will collaborate widely across the organization with Supply Chain, Engineering, Quality, Planning, Production, Facilities, and others.

The right person for this role will demonstrate holistic ownership in solving operational challenges with creative solutions in a fast-paced, resource-limited environment. As a Senior level position, you will use your Industrial Engineering skills and expertise to triage and prioritize your projects, you will build plans to reach outcomes, and you will manage and recover your project execution with autonomy and independence while using proper judgement to escalate effectively when required.

WHAT YOU’LL DO

• Produce and maintain capacity models, balanced line layouts, and production ramp plans to define labor planning, capex requirements, workstation design, and throughput gaps
• Design effective facility layouts and production lines using CAD and simulation which meet process requirements, enable production targets, optimize resource allocation and material flow, and maximize productivity and quality, both for low rate and full rate production
• Identify and champion improvements to key causes of high variability or production bottlenecks, driving actions to resolution across disciplines and stakeholders
• Translate and drive action from metrics, KPIs, and reporting associated with monitoring production line health and efficiency, such as cycle time, throughput rate, capacity, utilization, and first pass yield
• Analyze manufacturing health to support decisions impacting Engineering (cut-in dates for new designs), Supply Chain (signals on what to buy), Manufacturing (signals on being clear-to-build and what to build), and Growth (supply overview to drive commitments to demand)
• Communicate effectively, using graphic and analytical tools, to support collaborative decisions and to report status with clarity and relevance
• Lead the design of production lines and workstations for both low-rate and full-rate production using techniques like Value Stream Mapping, Time Studies, and Line Balancing
• Mentorship responsibility to develop junior IEs/technicians as well as peers about IE
• Interfacing with vendors/suppliers for equipment specifications and RFQs
• Development and alignment of standards across sites at Anduril to enable scalability
• Close cross-functional collaboration with MFG Eng & MFG Ops

REQUIRED QUALIFICATIONS

• Bachelor’s degree or higher in industrial, mechanical, manufacturing, or aerospace engineering
• 5+ years past experience in a high-rate manufacturing environment where complex products were built with heavy data utilization
• Factory and/or production line design and set up - Value Stream mapping, Flow lines, continuous flow, one piece flow, workstation design, PFMEA
• Material Flow Systems - designing how material flows around a facility, pull systems, Kanban, min/max calculations, Part presentation to operator, Tote bin packaging, lineside racking
• Digital Systems - experience with Siemens "Plant Simulation", "Process Simulation" software to model a production line and run production scenarios (or equivalent)
• Demonstrated ability to completely own a value chain from start to finish, coordinating among multiple different internal and external parties to achieve on-time deliveries under stringent quality standards
• Experience with ERP, PLM, WMS and MES systems
• Experience with Lean Manufacturing principles/implementation
• Proficiency creating and interpreting drawings in composite and metallic aerospace parts and assemblies: GD&T, NDT methods and acceptance criteria, process specifications, assembly methods, common hardware

PREFERRED QUALIFICATIONS

• Prior work designing and/or setting up new production lines or factories - from process mapping through to collaborating with infrastructure design partners and detailed work station design
• Skilled at handling large data sets, including filtering, identifying trends, and graphical representation
• Knowledge of design engineering and manufacturing engineering processes including:
• 3D CAD design/modeling of parts and assemblies
• 3D factory layout
• Manufacturing process planning of fabricated parts, and complex discrete assembly process
• Manufacturing simulation of assembly processes, human ergonomics, and discrete event simulation
• Strong manufacturing data analytics and statistical analysis background with proficiency in statistical process control
• Experience in an aerospace composites manufacturing environment

ABOUT THE JOB

The Product Sourcing Engineer drives the strategic supply network development and cost management of Anduril’s product hardware across their lifecycles, by collaborating with suppliers and cross-functionally, including folks in engineering, quality, and manufacturing.

WHAT YOU'LL DO

• Conduct supplier selection for a specific product, leveraging our approved supplier list
• Partner with strategic suppliers to accelerate product development via activities such as:
• Concept scoping to quickly solidify requirements
• Feature trade-off / trade tables
• Should cost / Clean sheet models
• Joint design development, via clear statements of work
• Simulation of mechanical & electronics designs
• Drive the development and consolidation of a manufacturing BOM, working with Quality & Manufacturing, to ramp production internally and with our suppliers with high flexibility
• Manage the CAPEX throughout NPI
• Conduct value-stream mapping to optimize supply network lead time and flexibility
• Complete the BOM risk assessment, include alternate component sourcing, etc.
• Ensure completion of all component qualifications, ahead of production
• Reduce complexity: commonality optimization & component/supplier rationalization
• Lead all cost engineering activities to converge the bottoms-up cost curve to product cost, maximizing the total cost of ownership (TCO) across the product lifecycle
• Manage ad-hoc cost issues e.g., tariffs / import export cost, and cost inflation

REQUIRED QUALIFICATIONS

• Bachelor’s degree in engineering or other technical field
• 1+ years of experience in sourcing engineering, supplier engagement and development, or design of electronics and/or mechanical devices
• Domain expertise of value/procurement engineering or TCO-related work at the component & product level
• Ability to travel up to 25% of the time
• Ability to relocate, if not already local to be onsite in Morrisville, NC

PREFERRED QUALIFICATIONS

• Master's degree or advanced technical degree
• Deeper experience within:
• Design & development of electronics and/or mechanical devices
• Advanced sourcing activities, including stints as commodity/sourcing managers
• Supplier development (technology, process, supply chain, etc.)
• Early supplier engagement, ahead of product/engineering requirement realization
• Ideal candidate has worked in highly regulatory environment, preferably energetics and solid rocket motor (SRM) production
• Familiarity with developing high-tech products in a high-mix, low-volume environment
• Exposure to working in a fast-pace, start-up environment
• Ability to obtain and maintain a U.S. TS clearance

ABOUT THE JOB

Anduril’s Planning team is seeking a world-class Senior Demand & Supply Planner to join our team. The Senior Demand & Supply Planner has an integral role at Anduril, having material flow responsibility throughout the entire value chain, from raw materials to finished goods shipped to customers. They will have full ownership of certain assemblies and product lines, and will be ultimately responsible for sending the correct signals to Purchasing and Manufacturing on what and when to buy or build. This hire will be instrumental in signaling and forecasting accurate demand, planning inventory levels, and ensuring that Anduril supports its hardware requirements via Enterprise Resource Planning (ERP) software and other associated tools.

The right person for this role has demonstrated ownership and experience solving complex operational challenges with creative solutions in a fast-paced, resource-limited environment. This person will be flexible to provide support wherever needed to ensure products are built and shipped under stringent quality standards. If you are someone who thrives in such an environment, then this role is for you!

WHAT YOU'LL DO

• Manage day-to-day demand signaling, ordering, and inventory for various product lines.
• Identify and resolve supply issues by collaborating with Engineering, Purchasing, and Manufacturing teams.
• Lead Sales and Operations Planning (S&OP) discussions for Supply Planning on designated product lines.
• Work with Business Development and Growth teams to align forecasts with actual demand plans.
• Report on and analyze supply and material health to inform key decisions for Engineering, Purchasing, Manufacturing, and Business Development.
• Develop and maintain processes within MRP systems and associated master data.
• Drive strategic initiatives towards best practices, including demand shaping, advanced modeling, and inventory optimization.

REQUIRED QUALIFICATIONS

• Bachelor’s degree in a technical field (i.e. manufacturing, engineering, analytics, computer science, etc.) or business field (i.e. finance, economics, supply chain management, business administration, marketing, etc.)
• 6+ years of experience in a supply chain or production role within a fast-paced manufacturing environment with complex mechanical and/or electrical assemblies.
• Complete ownership of a complex value chain, coordinating between multiple internal and internal parties to ensure on-time deliveries and adherence to quality standards.
• Technical expertise including ability to read technical documentation and understanding hardware manufacturing processes.
• Experience with ERP systems such as Oracle, Netsuite, and CRM systems like Salesforce.
• Ability to travel up to 10% of the time.
• Ability to relocate, if not already local to be onsite in Morrisville, NC.

PREFERRED QUALIFICATIONS

• Master’s degree or other higher education.
• 8+ years of experience in a supply chain or production role within a fast-paced manufacturing environment with complex mechanical and/or electrical assemblies.
• Strong experience with SQL databases, including building custom queries for production and inventory metrics.
• Proficiency in data analysis and reporting tools such as Tableau, Power BI, or Qlikview.
• Knowledge of supply chain planning systems like Blue Yonder and best practices in demand planning, inventory management, and S&OP.
• Experience with lean manufacturing, continuous improvement, six sigma principles, and big data evaluation techniques.
• Proactive, able to take substantial responsibility across various functions, with a focus on speed and accuracy.
• Ability to obtain and maintain a U.S. TS clearance

ABOUT THE JOB

Anduril’s Planning team is seeking a world-class Senior Master Scheduler, S&OP Planning (internally known at Anduril as Senior Demand & Supply Planner) to join our team. The Senior Master Scheduler, S&OP Planning has an integral role at Anduril, having material flow responsibility throughout the entire value chain, from raw materials to finished goods shipped to customers. They will have full ownership of certain assemblies and product lines, and will be ultimately responsible for sending the correct signals to Purchasing and Manufacturing on what and when to buy or build. This hire will be instrumental in signaling and forecasting accurate demand, planning inventory levels, and ensuring that Anduril supports its hardware requirements via Enterprise Resource Planning (ERP) software and other associated tools.

The right person for this role has demonstrated ownership and experience solving complex operational challenges with creative solutions in a fast-paced, resource-limited environment. This person will be flexible to provide support wherever needed to ensure products are built and shipped under stringent quality standards. If you are someone who thrives in such an environment, then this role is for you!

WHAT YOU'LL DO

• Manage day-to-day demand signaling, ordering, and inventory for various product lines.
• Identify and resolve supply issues by collaborating with Engineering, Purchasing, and Manufacturing teams.
• Lead Sales and Operations Planning (S&OP) discussions for Supply Planning on designated product lines.
• Work with Business Development and Growth teams to align forecasts with actual demand plans.
• Report on and analyze supply and material health to inform key decisions for Engineering, Purchasing, Manufacturing, and Business Development.
• Develop and maintain processes within MRP systems and associated master data.
• Drive strategic initiatives towards best practices, including demand shaping, advanced modeling, and inventory optimization.

REQUIRED QUALIFICATIONS

• Bachelor’s degree in a technical field (i.e. manufacturing, engineering, analytics, computer science, etc.) or business field (i.e. finance, economics, supply chain management, business administration, marketing, etc.)
• 6+ years of experience in a supply chain or production role within a fast-paced manufacturing environment with complex mechanical and/or electrical assemblies.
• Complete ownership of a complex value chain, coordinating between multiple internal and internal parties to ensure on-time deliveries and adherence to quality standards.
• Technical expertise including ability to read technical documentation and understanding hardware manufacturing processes.
• Experience with ERP systems such as Oracle, Netsuite, and CRM systems like Salesforce.
• Ability to travel up to 10% of the time.
• Ability to relocate, if not already local to be onsite in Morrisville, NC.

PREFERRED QUALIFICATIONS

• Master’s degree or other higher education.
• 8+ years of experience in a supply chain or production role within a fast-paced manufacturing environment with complex mechanical and/or electrical assemblies.
• Strong experience with SQL databases, including building custom queries for production and inventory metrics.
• Proficiency in data analysis and reporting tools such as Tableau, Power BI, or Qlikview.
• Knowledge of supply chain planning systems like Blue Yonder and best practices in demand planning, inventory management, and S&OP.
• Experience with lean manufacturing, continuous improvement, six sigma principles, and big data evaluation techniques.
• Proactive, able to take substantial responsibility across various functions, with a focus on speed and accuracy.
• Ability to obtain and maintain a U.S. TS clearance

ABOUT THE JOB

Anduril’s Manufacturing team is seeking a Project Manager to join our Composites Manufacturing team in North Carolina. This team designs and implements the manufacturing solutions to turn designs into prototypes rapidly, and subsequently transition composites manufacturing projects from development into full-rate production. In this role, you will directly manage and oversee execution of one or multiple projects. You will leverage a data-driven approach to project management ensuring on-time and on-budget delivery. Since manufacturing is the outcome that all other business functions have in common, you will collaborate widely across the organization with Supply Chain, Engineering, Quality, Planning, Production, Facilities, and more.

The right person for this role will demonstrate holistic ownership in solving operational challenges with creative solutions in a fast-paced, dynamic environment. You will build plans to reach outcomes and manage project execution with autonomy and independence while using proper judgement to escalate effectively when required.

WHAT YOU'LL DO

• You will scope projects and own their execution from initiation through completion
• You will develop schedules and budgets for projects to ensure an on time and on budget delivery
• You will collaborate across the organization (Supply Chain, Engineering, Quality, Planning, Production, Facilities,...) to deliver results
• You will collect data, build analyses, and present findings to leadership
• You will translate and drive action from metrics, KPIs, and reporting associated with monitoring project health and efficiency
• You will proactively identify, assess, and manage risks and opportunities, developing and implementing strategic response plans to ensure successful project delivery

REQUIRED QUALIFICATIONS

• Full-time on site in Anduril’s Morrisville, NC facility
• 3+ years of experience in manufacturing engineering, manufacturing operations, design engineering, consulting, change management, project management, program management, or engineering transformation
• Understanding of the product lifecycle (design/development/production), as well as the purpose of each phase and its associated importance for manufacturing readiness
• High EQ and ability to collaborate and influence across all levels and disciplines (individual contributor to senior leadership) to achieve results
• Proven ability to drive operational execution while also being able to step back and think strategically
• High level of comfort in ambiguous situations and ability to make decisions base on limited data
• Ability to create structure and implement new processes in a high growth environment - Identify needs, implement solutions and own the results
• Must be a U.S. Person due to required access to U.S. export controlled information or facilities

PREFERRED QUALIFICATIONS

• Experience leading or managing organizational change
• 8+ years of experience overall in relevant domains
• Strong business acumen together with knowledge of hardware engineering and manufacturing domains
• Experience in Aerospace composites or other AS9100 manufacturing environments
• Experience in implementing digital systems PLM/ERP/MES
• Strong data analytics ability (pulling data from multiple systems and interpreting to drive outcomes)
• Experience successfully taking new products and/or production systems from development to full-scale production
• Deep knowledge of co-design, engineering, and manufacturing phases of the product lifecycle

Anduril’s Manufacturing team is seeking a Manufacturing Engineer to join our team to support AeroStructures branch in North Carolina. This Manufacturing Team is responsible for rapidly iterating and building cutting-edge aerostructure assemblies, starting from the piece part manufacturing. This role encompasses everything in the manufacturing value-chain, including, but not limited to, MBOM Management, Work Instruction creation, Design for Manufacturability work, work cell optimization, tool design & selection, process creation & optimization, vendor sourcing & interaction, quality planning, and work documentation associated with the composite and metallic structures.

The right person for this role can demonstrate experience in composite part manufacturing and overall airframe assembly. This person will also demonstrate the ability to work across multiple functions (Manufacturing Operations, Airframe Design, Quality, Leadership, Supply Chain, etc) to achieve a successful manufacturing approach, flow, and build.

WHAT YOU’LL DO

• Work with technicians and other engineers hands-on, building composite parts and tooling in close conjunction with design engineering release
• Write manufacturing documentation, such as work instructions, MBOMs, quality plans, inspection requirements, non-conformances, while also completing said work instructions, quality plans, and inspections alongside a team of technicians and inspectors
• Work as a conduit between the engineering technical data packages and the technicians to ensure composite hardware and tooling are manufactured as designed/analyzed
• Solve manufacturing problems in schedule-driven environment under the constraints of detailed specifications and requirements to achieve the needed quality, delivered on schedule
• Drive work cell design and optimization to ensure quality and efficiency targets are maintained and managed
• Work with the Program Managers to inform critical decision points to ensure on-time delivery
• Drive RCCAs alongside the quality team to eliminate production blockers and recurring issues

REQUIRED QUALIFICATIONS

• Bachelor’s degree in an engineering or technology related field
• 2+ years of experience in a relevant field, preferably manufacturing or design of composite parts and/or assemblies
• A genuine interest in manufacturing and thirst for learning
• Ability to read and interpret engineering drawings including GD&T
• Proficiency in CAD/CAM software (NX preferred)
• Experience with MS Office and/or project management software skills
• Demonstrated in-kind or direct team leadership skills, with backing examples
• U.S. Person status is required as this position needs to access export controlled data

PREFERRED QUALIFICATIONS

• Experience supporting aerospace, defense, automotive, and/or energetics facilities
• Experience working within a AS9100/NADCAP accredited manufacturing facility
• Proficiency in TeamCenter for digital manufacturing processes
• Composite and Metallic Airframe assembly processes
• Understanding of CNC Machining operation and limitations – 5-axis routers, lathes, mills, etc

ABOUT THE TEAM

Anduril designs and builds aircraft, aircraft systems, and aerospace structures for the Defense, Space, and other aerospace-related industries. Our Aerostructures team in North Carolina focuses on delivering excellence in composite part manufacturing and airframe assembly.

ABOUT THE JOB

We are seeking a Head of Supply Chain to lead procurement, subcontracts, material flow, inventory, and warehousing operations across multiple programs. This senior leadership role carries broad responsibility for developing and executing supply chain strategies to fuel Anduril’s rapid growth in composites. You will be asked to lead cross-functional projects to achieve cost, quality, and delivery targets.

As a member of the Supply Chain team, you will be in a matrix reporting structure; reporting directly into Morrisville’s Head of Production with dotted line responsibilities into our corporate Supply Chain leadership.

WHAT YOU’LL DO

• Develop and implement supply chain strategies that align with overall business goals, aiming for supply continuity, quality, efficiency and cost optimization while enabling the business to scale significantly.
• Build and maintain strong relationships with suppliers and drive supplier performance management to ensure compliance with quality, delivery, and cost requirements.
• Negotiate (with support as needed from the Global Strategic Sourcing team as needed) complex commercial terms with suppliers directly to establish best-in-class pricing, quality, flexibility, delivery, payment, warranty, and service terms.
• Collaborate with other supply chain experts across the company to develop and execute supply chain best practices.
• Collaborate internally with key cross functional leadership teams (ex., engineering, program management, finance, business line...etc.) to negotiate the right tradeoffs, solicit cooperation and resolve problems proactively
• Identify and implement process improvements to enhance efficiency, reduce costs, and improve overall supply chain performance. Define key performance indicators (KPIs) to track track supply chain health and drive improvements.
• Monitor KPIs, analyze data, and provide regular reports to management on supply chain performance.
• Lead and manage a team of supply chain professionals, providing guidance, training, and support. Hire world class talent to continue the rapid expansion of the existing team.
• Proactively identify and mitigate potential risks to the supply chain, such as disruptions to supply or changes in market conditions.
• Optimize material flow systems including warehousing, material handling, and staging/kitting/delivery processes to support production requirements.
• Conduct make/buy analysis and vertical integration assessments to determine the most effective manufacturing and sourcing strategies.
• Develop innovative inventory solutions and ensure inventory accuracy to balance operational efficiency with program requirements.
• Implement and oversee supply base cost management initiatives to drive value and maintain competitive advantage in the defense sector.
• Support capture teams with supply chain expertise to strengthen bid responses and proposals for new business opportunities.
• Lead strategic source selection processes to identify and qualify suppliers that can meet Anduril's demanding technical and schedule requirements.

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Supply Chain, Business, Engineering, or related field (MBA preferred)
• 10+ years of progressive supply chain leadership in aerospace & defense, or composites manufacturing
• Strong background in procurement, subcontracts, material planning, and warehouse/inventory operations
• Proven ability to negotiate complex agreements and deliver results on cost, schedule, and quality
• Experience scaling supply chain organizations during high growth or production ramps
• Executive presence with exceptional communication and stakeholder management skills
• Ability to travel up to 20%
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS:

• MBA or Master’s degree in supply chain, engineering, or related technical field
• Previous experience in implementing ERP systems as they relate to supply chain (ex., supplier portal, warehouse management system...etc.).
• Proven leadership leading large teams in driving and influencing other teams to a common goal.
• Strong team player who can wear different hats to help your team move forward. Willing to tackle individual contributor tasks while managing a small team.

ABOUT THE JOB

Anduril’s Planning team is seeking an Manager, Demand & Supply Planning to join our team. The Planning team is responsible for planning material and builds to support rapidly iterating and building of cutting-edge defense hardware, including static equipment, mobile ground equipment, and flight vehicles. The Manager Demand & Supply Planning will manage a team of Demand & Supply Planners in executing S&OP and providing in-depth analysis for our business partners. They will ultimately be responsible for sending the correct signals to Purchasing and Manufacturing on what and when to buy or build for each of the supported product lines. The addition of this role is pivotal in transforming our Sales and Operations Planning (S&OP) process, empowering our operations to not only meet but exceed our financial objectives. This strategic hire will be instrumental in driving operational excellence and enhancing our ability to forecast, plan, and execute with greater precision and efficiency.

The right person for this role has demonstrated ownership and experience solving complex operational challenges with creative solutions in a fast-paced, resource-limited environment. This person will be flexible to provide support wherever needed to ensure products are built and shipped under stringent quality standards. If you are someone who thrives in such an environment, then this role is for you!

WHAT YOU'LL DO

• Develop and execute supply & demand plans that support the company's sales forecasts and business strategies.
• Lead the Supply & Demand planning team to ensure efficient and effective execution of planning activities.
• Collaborate through S&OP with various departments, including sales, operations, and finance, to gather relevant data for accurate supply forecasting.
• Effectively distill and communicate complex scenarios to executives for strategic decision-making and alignment.
• Manage inventory levels to meet service level targets while minimizing excess and obsolete inventory.
• Monitor supplier performance, ensuring timely delivery of materials, and address any supply chain disruptions proactively.
• Optimize supply & demand planning processes through continuous improvement initiatives to increase efficiency.
• Implement and maintain planning systems and tools to improve planning accuracy and visibility across the organization.
• Define Key Performance metrics for Supply & Demand Planning functions.
• Prepare and present regular reports on program performance, including inventory metrics and risk assessments.
• Support new product launches by coordinating with cross-functional teams to ensure material readiness and timely market entry.

REQUIRED QUALIFICATIONS

• Bachelor’s degree in a technical field (i.e. manufacturing, engineering, analytics, computer science, etc.) or business field (i.e. finance, economics, supply chain management, business administration, marketing, etc.)
• 8+ years of experience in a supply chain or production role within a fast-paced manufacturing environment with complex mechanical and/or electrical assemblies.
• 3+ years of experience managing a direct team.
• Demonstrated ability to completely own complex value chains from start to finish, coordinating between multiple internal and internal parties to ensure on-time deliveries and adherence to quality standards.
• Experience with ERP systems such as Oracle, Netsuite, and CRM systems like Salesforce
• Ability to demonstrate a willingness to take on substantial responsibility across supply chain, logistics, engineering, and supply planning functions with a bias towards speed and accuracy.
• Strong technical expertise including ability to read technical documentation, drawings, and CAD data, understanding of a variety of hardware manufacturing processes for both electronics (PCBAs, sensor hardware, etc.) and structures/mechanisms.
• Ability to travel up to 25% of the time.
• Ability to relocate, if not already local to be onsite in Morrisville, NC.

PREFERRED QUALIFICATIONS

• Master’s degree or other higher education.
• Ability to demonstrate a willingness to take on substantial responsibility across supply chain, logistics, engineering, and supply planning functions with a bias towards speed and accuracy.
• Strong experience with SQL databases, including building custom queries for production and inventory metrics.
• Proficiency in data analysis and reporting tools such as Tableau, Power BI, or Qlikview.
• Knowledge of supply chain planning systems like Blue Yonder and best practices in demand planning, inventory management, and S&OP.
• Experience with lean manufacturing, continuous improvement, six sigma principles, and big data evaluation techniques.
• Proactive, able to take substantial responsibility across various functions, with a focus on speed and accuracy.
• Ability to obtain and maintain a U.S. TS clearance.

ABOUT THE JOB

Anduril’s Demand & Supply Planning team is seeking a world-class Demand & Supply Planner to join our team. The Demand & Supply Planner has an integral role at Anduril, having material flow responsibility throughout the entire value chain, from raw materials to finished goods shipped to customers. They will have full ownership of certain assemblies and product lines, and will be ultimately responsible for sending the correct signals to Purchasing and Manufacturing on what and when to buy or build. This hire will be instrumental in signaling and forecasting accurate demand, planning inventory levels, and ensuring that Anduril supports its hardware requirements via Enterprise Resource Planning (ERP) software and other associated tools.

The right person for this role has demonstrate ownership and experience solving complex operational challenges with creative solutions in a fast-paced, resource-limited environment. This person will be flexible to provide support wherever needed to ensure products are built and shipped under stringent quality standards. If you are someone who thrives in such an environment, then this role is for you!

WHAT YOU'LL DO

• Manage day-to-day demand signaling, ordering, and inventory for various product lines.
• Identify and resolve supply issues by collaborating with Engineering, Purchasing, and Manufacturing teams.
• Lead Sales and Operations Planning (S&OP) discussions for Supply Planning on designated product lines.
• Work with Business Development and Growth teams to align forecasts with actual demand plans.
• Report on and analyze supply and material health to inform key decisions for Engineering, Purchasing, Manufacturing, and Business Development.
• Develop and maintain processes within MRP systems and associated master data.
• Drive strategic initiatives towards best practices, including demand shaping, advanced modeling, and inventory optimization.

REQUIRED QUALIFICATIONS

• Bachelor’s degree in a technical field (i.e. manufacturing, engineering, analytics, computer science, etc.) or business field (i.e. finance, economics, supply chain management, business administration, marketing, etc.)
• 3+ years of experience in a supply chain or production role within a fast-paced manufacturing environment dealing with complex assemblies.
• Complete ownership of a complex value chain, coordinating between multiple, high volume of departments and teams to ensure on-time deliveries and adherence to quality standards.
• Technical expertise including ability to read technical documentation and understanding hardware manufacturing processes.
• Experience with ERP systems such as Oracle, NetSuite, and CRM systems like Salesforce.
• Ability to travel up to 10% of the time.
• Ability to relocate, if not already local to be onsite in Morrisville, NC.

PREFERRED QUALIFICATIONS

• Master’s degree
• Strong experience with SQL databases, including building custom queries for production and inventory metrics.
• Proficiency in data analysis and reporting tools such as Tableau, Power BI, or Qlikview.
• Knowledge of supply chain planning systems like Blue Yonder and best practices in demand planning, inventory management, and S&OP.
• Experience with lean manufacturing, continuous improvement, six sigma principles, and big data evaluation techniques.
• Proactive, able to take substantial responsibility across various functions, with a focus on speed and accuracy.
• Ability to obtain and maintain a U.S. TS clearance

Our office, Levin Endodontics, is seeking a talented Dental Assistant to join our busy specialty practice. 

We are looking for a talented and skilled Dental Assistant to help us accomplish our mission to improve the lives of our patients by providing a world-class specialty experience for every patient. Here is what you need to know about the role, our team and why we could be the right next step in your career.  

Your Responsibilities 

You will ensure excellent patient service and lift administrative and basic dental tasks off the Dentist’s shoulders. You will be focused on ensuring that the patients' needs, concerns, and questions are answered. You will help keep the patient relaxed and comfortable during their visit, being the patients go to resource during their visit which includes the following: 

• Welcoming patients to the dental office 
• Preparing patients for treatment, ensuring their comfort 
• Selecting and set up instruments, equipment, and supplies 
• Sterilizing instruments according to regulations 
• Assisting the dentist through 4-handed dentistry 
• Providing oral hygiene and post-operative care instructions 
• Keeping the dental room clean and well-stocked 
• Scheduling appointments and post op visits 
• Maintaining accurate patient records  
• Assisting with payment procedures 

As one of the essential members of our office, you will also help to facilitate/coordinate other office responsibilities as needed.  

Your Background 

You are a resourceful dental assistant who loves helping patients receive the experience they deserve and helping the Dentist to provide it. You're excited by the prospect of a patient leaving your office in a healthier, stronger, and more comfortable / happier being, each and every day. You’re a kind, passionate and collaborative problem-solver who is able to proactively adjust to shifting priorities, and values the chance to make an important impact.  

You also have the following: 

• At least 3+ years of proven experience as dental assistant, specialty is preferred 
• Knowledge of dental instruments and sterilization methods 
• Understanding of health & safety regulations 
• Ability to perform regulated non-surgical tasks 
• Good computer skills 
• Excellent communication and people skills 
• A strong attention to detail 
• Well-organized and reliable 
• A high school diploma  
• A certificate from an accredited dental assistant program (if required by law) 
• An active state radiology license (if required by law) 

If this sounds like you, you will fit right in with the team! 

Why You Should Join Our Team  

A career with us is a chance to work with everyone involved in the future of Specialty dental care. Dental Assistants, Sterilization Technicians, Specialists, Office Managers, Patient Care Coordinators and many more all work together to improve the patient care experience and great clinical results.  

We strive to build and maintain an environment where employees from all backgrounds are valued, respected, and have the opportunity to succeed. You will also find a culture of continuous learning and a commitment to supporting our team members in all aspects of their lives—at home, at work and everywhere in between.  

Your Benefits & Perks 

• BCBS Medical & Dental insurance Options 
• VSP Vision Coverage      
• Complimentary Life Insurance Policy (employee only)
• Short-term & Long-Term Disability   
• Pet Insurance Coverage  
• 401(k) plan w/match options
• HSA / FSA Account Access 
• Identity Theft Protection 
• Legal Services Package 
• Hospital/Accident/Critical Care Coverage 
• Paid Time Off 

3624 Shannon Rd, Ste 106 Durham, NC 27707

This role is an Onsite Role: This role requires full-time presence at our Oxford, North Carolina office.

Overview:

Electro-Mechanical Maintenance Technician with the skills and knowledge to effectively troubleshoot and repair varied equipment and systems. Strong root cause analysis skills required to eliminate recurring failures.

Responsibilities:

• Plans, initiates and completes job assignments in a prompt and timely manner.
• Operates a broad array of shop equipment (mills, lathes, saws, etc.)
• Participates in project management including line layout derivation/review, installation and start-up.
• Interfaces effectively with outside vendors to place supply or part orders.
• Keeps assigned work areas safe, clean and orderly.
• Completes job assignments in a prompt and timely manner.
• Complies with company policy regarding GMP, USDA, and all safety regulations.
• Install, maintain, troubleshoot and repair a broad range of filling and assembly equipment with varied systems including filling and assembly equipment, conveyors, pumps, carton and box makers.
• Able to effectively troubleshoot electrical, controls, hydraulics, pneumatics, lubrication, and other mechanical systems.
• Respond to machinery and equipment emergencies
• Visually inspect and perform tests, diagnosis and maintenance work on machinery and equipment
• Read and interpret electrical and mechanical schematics
• Perform mechanical and electrical PMs during operation or during periods of scheduled downtime
• Accurate completion of maintenance records
• Direct equipment operations when performing preventative maintenance, troubleshooting, repair and/or set up of equipment as necessary to complete assignments
• Report all problems that prevent completion of assigned tasks to your supervisor
• Work within a team structure with minimal supervision
• Modify equipment as assigned to support a continuous improvement culture
• Provide guidance and maintenance instructions as needed
• Continuously look for and recommend equipment and system improvements
• Work in various areas of the plant is required.
• Train as needed
• Root cause analysis skills required to eliminate recurring failures
• Other tasks as assigned by your supervisor

Qualifications:

• Good working knowledge of filling and assembly equipment and systems.
• Ability to operate power shop tools in addition to common hand tools safely and effectively
• Experience working with a wide range of industrial equipment and with hydraulics, pneumatics, lubrication, welding, pipe-fitting, power transmission systems, etc.
• Experience doing preventative maintenance, troubleshooting, repair and/or set up of equipment required
• Demonstrated computer (Word, Excel, Outlook, etc.) and internet research skills are required
• Ability to follow and issue verbal and written instructions
• Strong and effective communication skills, both verbal and written
• Ability to work well under pressure and juggle multiple and changing deadlines in a fast-paced environment
• Great attention to detail
• Strong organizational and time management skills
• Ability to build strong internal relationships with other departments
• Ability and willingness to take initiative
• Reliability and willingness to work 40+ hours a week to meet deadlines
• Flexibility to change shifts as required to provide proper support
• Ability to interpret schematic drawings, hardware logic diagrams, PLC Control programs and motor control programs
• Ability to read calipers, tape measures and angle gauges
• Ability and willingness to travel as needed
• Must pass assessment test(s)
• Continued growth and development to match new technologies
• Must be able to provide hand tools as required
• Able to stand and/or walk 90% (sitting 10%) of an 8-hr day which includes climbing a ladder or steps
• Must meet the vision and hearing requirements
• Must be able to lift and carry 50 lbs and manipulate up to 500 lbs
• Associate's Degree or 2-year technical degree from an accredited institution in Mechatronics, Industrial Maintenance Technology, Electrical Maintenance, or some other related and equivalent field AND 3-5 years of experience in an industrial or manufacturing environment, or the following education and experience requirements may substitute for above: High School Diploma/GED AND 10 years of mechanical and/or electrical maintenance experience in an industrial or manufacturing environment and meets skills requirements

#LI-JL1 #LI-Onsite

Revlon is unable to sponsor or transfer employment visas for this role; candidates must be legally authorized to work in the United States without current or future visa support.

The base pay range for this position is $36.00 / hour; however base pay offered may vary depending on skills, experience, job-related knowledge, and geographic location. Certain positions may also be eligible for short-term incentives as part of total compensation.

Employees (and their families) are eligible for medical, dental, and vision benefits. Employees are covered by the company-paid basic life insurance policy and company-paid short-term disability insurance (the benefit commences upon hire and allows for a portion of base salary for up to 26 weeks if you are disabled). Other benefits offered to employees include but are not limited to the following: long-term disability, supplemental life insurances, flexible spending accounts, critical illness insurance, group legal, identity theft protection, etc. Employees are also able to enroll in our 401k Retirement Savings Plan.

Employees will also receive 3 weeks of vacation, pro-rated based on date of hire for the 1st year of employment and twelve paid holidays throughout the calendar year. Vacation will depend on role.

Our office, Carolina Mountain Endodontics - Clyde in Clyde, NC, is looking for a talented and skilled Dental Assistant to help us accomplish our mission to improve the lives of our patients by providing a world-class specialty experience for every patient. Here is what you need to know about the role, our team and why we could be the right next step in your career.  

Your Responsibilities 

You will ensure excellent patient service and lift administrative and basic dental tasks off the Dentist’s shoulders. You will be focused on ensuring that the patients' needs, concerns, and questions are answered. You will help keep the patient relaxed and comfortable during their visit, being the patients go to resource during their visit which includes the following: 

• Welcoming patients to the dental office 
• Preparing patients for treatment, ensuring their comfort 
• Selecting and set up instruments, equipment, and supplies 
• Sterilizing instruments according to regulations 
• Assisting the dentist through 4-handed dentistry 
• Providing oral hygiene and post-operative care instructions 
• Keeping the dental room clean and well-stocked 
• Scheduling appointments and post op visits 
• Maintaining accurate patient records  
• Assisting with payment procedures 

As one of the essential members of our office, you will also help to facilitate/coordinate other office responsibilities as needed.  

Your Background 

You are a resourceful dental assistant who loves helping patients receive the experience they deserve and helping the Dentist to provide it. You're excited by the prospect of a patient leaving your office in a healthier, stronger, and more comfortable / happier being, each and every day. You’re a kind, passionate and collaborative problem-solver who is able to proactively adjust to shifting priorities, and values the chance to make an important impact.  

You also have the following: 

• At least 5 years of proven experience as dental assistant, specialty is preferred 
• Knowledge of dental instruments and sterilization methods 
• Understanding of health & safety regulations 
• Ability to perform regulated non-surgical tasks 
• Good computer skills 
• Excellent communication and people skills 
• A strong attention to detail 
• Well-organized and reliable 
• A high school diploma  
• A certificate from an accredited dental assistant program (if required by law) 
• An active state radiology license (if required by law) 

If this sounds like you, you will fit right in with the team! 

Why You Should Join Our Team  

A career with us is a chance to work with everyone involved in the future of Specialty dental care. Dental Assistants, Sterilization Technicians, Specialists, Office Managers, Patient Care Coordinators and many more all work together to improve the patient care experience and great clinical results.  

We strive to build and maintain an environment where employees from all backgrounds are valued, respected, and have the opportunity to succeed. You will also find a culture of continuous learning and a commitment to supporting our team members in all aspects of their lives—at home, at work and everywhere in between.  

Your Benefits & Perks 

• BCBS Medical & Dental insurance Options 
• VSP Vision Coverage      
• Complimentary Life Insurance Policy (employee only)
• Short-term & Long-Term Disability   
• Pet Insurance Coverage  
• 401(k) plan w/match options
• HSA / FSA Account Access 
• Identity Theft Protection 
• Legal Services Package 
• Hospital/Accident/Critical Care Coverage 
• Paid Time Off 

59 Haywood Park Drive Clyde, NC 28721

This role is an Onsite Role: This role requires full-time presence at our Oxford, North Carolina office.

The Quality Systems & Compliance Engineering Technician will assist the Manager of QA S&C and will interface with Quality Control, Quality Assurance, Manufacturing, Supply Chain and R&D to drive Continuous Improvement to our processes, systems, and products. 

The Engineering Technician will rely on Quality Standards & Policies for the Revlon Oxford Manufacturing Facility, located in North Carolina. 

The QA S & C Engineering Technician will audit and trend QS and make recommendations on implementing, coordinating, and improving the site quality system in accordance with applicable guidance, standards, and regulations.   

Basic Function 

• Trends and confirms implementation caliber for the Site’s Quality Systems, i.e. change control, Non-conformance process, Root cause and CAPA review, and supports the Site Management Reviews as established and maintained. Supports the performance of the Quality System in conjunction with the Manager of Quality Compliance.   
• Monitors Quality System trends and brings those systems in need of corrective action to upper management’s attention. Assures implementation of Corrective action as required, confirms effectiveness, and maintains documentation accordingly. 
• Reviews procedures and regulations in alignment with current facility practices and recommends follow up continuous improvement training as necessary. 
• Reviews Metrics for appropriateness / applicable to regulatory guidance and practices. Aligns those KPI/Metrics with daily and weekly activities confirming the metrics are supportive of Quality and R&D policies, procedures, and goals. 
• Supports the Manager for reporting on Internal Audits of the local factory. Further, to provide and track improvement and success in audit responses as recommendations for improvement are implemented.  Track the Internal Audit schedule and working with QC and Operations provide an internal audit response / tracker to identify status of improvement. i.e., track improvement plans and identify any lagging activity. 
• Support equipment qualification activities as needed within document review / tracking. Knowledge of Quality standards, FDA Guidance, QC Testing methodologies in support of equipment qualification activities. 
• Provide support to ship out new item samples to external support groups.
• Responsible in understanding compliance in accordance with regulations and standards such as but not limited to 21CFR 210, 21CFR211, 21CFR820, ISO 27716, ISO 13485 
• Responsible for review and knowledge of Revlon Global Procedures written to support the Global Quality Assurance Program. Industry specific FDA; Canada; Europe; Global markets. 
• Provide problem solving skills and expertise to drive solutions. 
• Able to handle multiple projects simultaneously. 

Required Competencies, Skills, Experience  

• 3-5 years industry experience 
• Proficient in the computer applications of Office suite: Word & Excel; Experience with Sharepoint systems; SAP general knowledge. 
• Hands-on knowledge of laboratory practices, microbiology, analytical exposure, quality control and quality assurance best practices, etc. Must have experience with GMP Manufacturing, Quality and Compliance: GMP/GLP or GXP and CFR requirements 
• Good written and oral communication skills to effectively reach all levels of the organization, including the ability to brainstorm solutions, monitor and provide recommendations for improvement. 
• Must be able to prepare and convey data analysis to manager and others within a group with clarity and accuracy. 
• Self-directed, complete routine tasks independently and be confident in making decisions, in consultation with management. 

Education: 

• Associates in the Sciences: Applied Science, Biology, Chemistry, Engineering etc. 
• Or High School Education plus 5 years of Quality and Manufacturing experience. 

#LI-Onsite #LI-EM1

Revlon is unable to sponsor or transfer employment visas for this role; candidates must be legally authorized to work in the United States without current or future visa support.

The base pay range for this position is $55,000 - $70,000 / year; however base pay offered may vary depending on skills, experience, job-related knowledge, and geographic location. Certain positions may also be eligible for short-term incentives as part of total compensation.

Employees (and their families) are eligible for medical, dental, and vision benefits. Employees are covered by the company-paid basic life insurance policy and company-paid short-term disability insurance (the benefit commences upon hire and allows for a portion of base salary for up to 26 weeks if you are disabled). Other benefits offered to employees include but are not limited to the following: long-term disability, supplemental life insurances, flexible spending accounts, critical illness insurance, group legal, identity theft protection, etc. Employees are also able to enroll in our 401k Retirement Savings Plan.

Employees will also receive 3 weeks of vacation, pro-rated based on date of hire for the 1st year of employment and twelve paid holidays throughout the calendar year. Vacation will depend on role.

CPI Security, a leader in the security and automation solutions industry, is looking for a Customer Support Advisor to join our growing team at our headquarters in Charlotte, NC! CPI Security was founded in 1991 on an entrepreneurial spirit and a passion for helping and protecting others. What started as a company of 10 employees and 300 customers has grown into one of the nation's top 10 largest security providers with over 750 employees. Over the years, CPI has received many awards for excellence, such as twice-awarded SDM Dealer of the Year, Central Station of the Year, and the Marvel Award. The company leads the industry in alarm response times, is consistently ranked in the top 10 of electronic security businesses and is widely known as North Carolina and South Carolina's Top 25 Best Places to Work.

What You'll Do:

In this role, you’ll be empowered to make decisions, communicating directly with customers to answer account inquiries, diagnose and resolve security system related issues with home automation and video products in order to provide customers with a satisfactory resolution to ensure complete satisfaction. When you become a Customer Support Advisor at CPI Security, you join an energetic group of people dedicated to making every day safer for our community and our customers. If you’re an experienced customer service professional, enjoy solving problems and keeping customers happy, and want a career with purpose, this opportunity is for you. 

Responsibilities

• Respond to and resolve customer questions and requests on various items such as: equipment, company policies, customer contracts, system operation and maintenance, monitoring service, billing, and account inquiries
• Provide exceptional customer support and communicate through various platforms such as: phone, text, web chat, and e-mail
• Effectively communicate CPI Security’s value, products, and services to customers and utilize upselling techniques to meet customers’ needs
• Apply appropriate troubleshooting methods and techniques in resolving challenges while documenting all actions taken and following up to ensure satisfactory resolution
• Perform alarm system downloads to ensure programming of alarm systems
• Assist field technicians with signal feedback, testing, and general customer account information needs
• Act as brand ambassador while setting the example of our people-first culture as you work with customers on completing customer satisfaction surveys

What’s In It For You!

• $40,000 - $50,000 average annual compensation
• Ongoing specialized, paid training and career growth opportunities.
• Great medical, dental, vision, short- & long-term disability and life insurance options, PTO and 401(k) plan with company match
• Eligible for free monitored security system after 90 days 
• Talk about perks!  An on-site café, coffee/smoothie bar, walking trail, basketball court, and state-of-the-art fitness facility with a dedicated Fitness Director

What We're Looking For:

• High school diploma or equivalent
• Minimum 2 years customer service experience, technical support experience preferred
• Phone-based support skills preferred
• Advanced typing and computer skills
• Thrive in a busy, fast-paced work environment
• A self-starter who can operate independently, within a team environment

ABOUT VEG

In 2014, VEG was born with a mission to help people and their pets when they need it most. This meant challenging the status quo and fixing everything that was wrong with the ER experience. Since then, we’ve expanded rapidly, with hospitals nationwide open 24/7, 365 days a year, and created a better emergency experience—not only for people and their pets, but also for everyone who works here—our VEGgies!

At VEG we find a way to say yes to the career you want in veterinary emergency medicine. This means transforming how ER works, from our open-concept hospitals, where you can handle emergency cases of every kind (even exotics!) to our immersive, customer-focused experience, which helps us give people and their pets the care they deserve.

This also means saying yes to creating the greatest experience possible for our VEGgies. Yes to working in an environment where you can find your place and feel valued for the amazing work you do. Yes to having unparalleled opportunities for learning and mentorship so you can grow where you want to go in your career. And yes to making an impact here in ways you never thought possible.

VEG is a 2025 and 2026 certified Great Place to Work®.

THE JOB

As a per diem Emergency Credentialed Veterinary Technician, you’re part of a team that thrives on the front lines of emergency veterinary care where every second counts. You’ll handle a wide range of cases, from minor to complex emergencies, collaborating with our doctors and team in delivering gold standard, emotionally intelligent care. You’ll jump into triage, treatments, diagnostics, anesthesia, monitoring, and critical care nursing, all while being a steady, compassionate presence for pet parents in their most stressful moments. This role is for someone who wants to do the work they were trained to do (and more), continue growing their skills, and help people and their pets when they need it most.

WHAT YOU’LL DO

• Treat every patient and person like they matter—because they do! You keep people and pets together and stay by their side through tests, treatments, and everything in between
• Jump into action, delivering nursing care, treatments, and emotional support in the most critical moments, from first triage to discharge
• Bring the meds, the monitoring, the mastery—from IVs and CRIs to blood transfusions and beyond
• Communicate like a teammate and think like a leader, helping shape plans and keep care flowing
• Be ready to perform CPR like the trained RECOVER rockstar you are (not only do we offer training, we have the highest number of RECOVER CPR professionals and instructors in the industry!)
• All the techy stuff—from diagnostics and imaging to sample collection and placing tubes
• Anesthesia, even for our most fragile patients? You’ve got it.
• Use all the advanced techniques in your toolkit: central lines, endoscopy, ultrasounds, and more

WHAT YOU NEED

• High school diploma or equivalent required; associate’s degree or higher in veterinary technology from an AVMA accredited program strongly preferred
• Credentialed as a veterinary technician (CVT, RVT, LVT, LVMT) in the state the VEG practice is located is required; VTS in ECC, internal medicine or anesthesia/analgesia is a plus and will lead to extra considerations in compensation.
• 1+ years of experience in a veterinary technician role; experience in emergency or specialty medicine preferred
• Basic computer skills and a comprehension of practice management software and electronic medical record keeping
• Excellent communicator and calm under pressure; ready to lend a hand to support those around you
• Fine motor skills for handling patients and medical equipment
• Ability to stand for prolonged hours, kneel, and work on the floor as well as ability to lift up to 25 kg on own and able to support up to 40 kg with assistance
• Must be willing to work in a noisy environment with strong or unpleasant odors
• Availability to work nights, weekends, and holidays on a rotating or as needed basis based on hospital needs
• Work well in a fast-paced environment with people from all backgrounds and different personality types

WHO YOU ARE

• Empathetic, instinctively taking a people-centric approach, whether supporting your colleagues or making an effort to understand different perspectives
• Have a sense of humility; acknowledging mistakes, sharing credit with others, and lifting up your team’s’ accomplishments
• Feel a strong sense of ownership over your work, taking responsibility for outcomes and staying committed to achieving long-term, impactful results 
• Curious by nature; you ask insightful questions and continuously seek out opportunities to learn and grow your skills and knowledge

HOW WE INVEST IN YOU

• Competitive compensation
• Flexible work schedules to support your life outside of work
• Generous employee referral program, so our awesome people can bring in more awesome people
• And the little (big) things, like comfy scrubs, cool VEG swag, food in the fridge for when you’re hungry

DEI

At VEG, diversity is not just a word—it's a strength that fuels innovation and kindness. Our mission is “Helping people and their pets when they need it most.” And we do that better when our VEGgies (employees) feel valued, respected, and empowered to bring their authentic selves to work. That's why we're devoted to creating an environment that reflects the diverse communities we serve—where different perspectives are not only welcomed but celebrated.

We are focused on providing equitable opportunities for growth, promoting inclusive decision-making, and ensuring that everyone's perspective is considered. Saying yes to VEG means helping us build a culture where your unique experiences and background contribute to a shared vision: being the world’s veterinary emergency company.

ABOUT VEG

In 2014, VEG was born with a mission to help people and their pets when they need it most. This meant challenging the status quo and fixing everything that was wrong with the ER experience. Since then, we’ve expanded rapidly, with hospitals nationwide open 24/7, 365 days a year, and created a better emergency experience—not only for people and their pets, but also for everyone who works here—our VEGgies!

At VEG we find a way to say yes to the career you want in veterinary emergency medicine. This means transforming how ER works, from our open-concept hospitals, where you can handle emergency cases of every kind (even exotics!) to our immersive, customer-focused experience, which helps us give people and their pets the care they deserve.

This also means saying yes to creating the greatest experience possible for our VEGgies. Yes to working in an environment where you can find your place and feel valued for the amazing work you do. Yes to having unparalleled opportunities for learning and mentorship so you can grow where you want to go in your career. And yes to making an impact here in ways you never thought possible.

VEG is a 2025 and 2026 certified Great Place to Work®.

THE JOB

As an Emergency Credentialed Veterinary Technician, you’re part of a team that thrives on the front lines of emergency veterinary care where every second counts. You’ll handle a wide range of cases, from minor to complex emergencies, collaborating with our doctors and team in delivering gold standard, emotionally intelligent care. You’ll jump into triage, treatments, diagnostics, anesthesia, monitoring, and critical care nursing, all while being a steady, compassionate presence for pet parents in their most stressful moments. This role is for someone who wants to do the work they were trained to do (and more), continue growing their skills, and help people and their pets when they need it most.

WHAT YOU’LL DO

• Treat every patient and person like they matter—because they do! You keep people and pets together and stay by their side through tests, treatments, and everything in between
• Jump into action, delivering nursing care, treatments, and emotional support in the most critical moments, from triage to discharge
• Bring the meds, the monitoring, and the mastery—from IVs and CRIs to blood transfusions and beyond
• Communicate like a teammate and think like a leader, helping shape plans and keep care flowing
• Be ready to perform CPR like the trained RECOVER rockstar you are (not only do we offer training, we have the highest number of RECOVER CPR professionals and instructors in the industry!)
• All the techy stuff—from diagnostics and imaging to sample collection and placing tubes
• Anesthesia, even for our most fragile patients? You’ve got it.
• Use all the advanced techniques in your toolkit: central lines, endoscopy, ultrasounds, and more

WHAT YOU NEED

• High school diploma or equivalent required; associate’s degree or higher in veterinary technology from an AVMA accredited program strongly preferred
• Credentialed as a Veterinary Technician (CVT, RVT, LVT, LVMT) in the state the VEG practice is located is required; VTS in ECC, internal medicine or anesthesia/analgesia is a plus and will lead to extra considerations in compensation
• 1+ years of experience in a veterinary technician role; experience in emergency or specialty medicine preferred
• Basic computer skills and a comprehension of practice management software and electronic medical record keeping
• Excellent communicator and calm under pressure; ready to lend a hand to support those around you
• Fine motor skills for handling patients and medical equipment
• Ability to stand for prolonged hours, kneel, and work on the floor as well as ability to lift up to 25 kg on own and able to support up to 40 kg with assistance
• Must be willing to work in a noisy environment with strong or unpleasant odors.
• Availability to work nights, weekends, and holidays on a rotating or as needed basis based on hospital needs
• Work well in a fast-paced environment with people from all backgrounds and different personality types

WHO YOU ARE

• Empathetic, instinctively taking a people-centric approach, whether supporting your colleagues or making an effort to understand different perspectives
• Have a sense of humility; acknowledging mistakes, sharing credit with others, and lifting up your team’s’ accomplishments
• Feel a strong sense of ownership over your work, taking responsibility for outcomes and staying committed to achieving long-term, impactful results 
• Curious by nature; you ask insightful questions and continuously seek out opportunities to learn and grow your skills and knowledge

HOW WE INVEST IN YOU

• Competitive compensation, including base and 401K match
• Comprehensive health and wellness benefits that start on day one, including QPR training and access to free therapy or counseling
• Based on your role, you may be eligible for equity after one year of full time, active employment with VEG, so you can share in our growth and success
• A BIG focus on learning and growth, from VEG-created clinical and leadership programs to unlimited ER CE + travel stipend (no really!). Full-time credentialed VEGgies receive a $2,500/year travel stipend. Full-time uncredentialed VEGgies receive a $1,000/year travel stipend.
• Clinical student loan repayment so you don’t need to worry about your student debt
• Paid parental leave, up to 12 weeks at 100% of regular salary and inclusive fertility and family-building care for all types of families
• Flexible work schedules to support your life outside of work
• Generous employee referral program, so our awesome people can bring in more awesome people
• And the little (big) things, like comfy scrubs, cool VEG swag, and food in the fridge for when you’re hungry

DEI

At VEG, diversity is not just a word—it's a strength that fuels innovation and kindness. Our mission is “Helping people and their pets when they need it most.” And we do that better when our VEGgies (employees) feel valued, respected, and empowered to bring their authentic selves to work. That's why we're devoted to creating an environment that reflects the diverse communities we serve—where different perspectives are not only welcomed but celebrated.

We are focused on providing equitable opportunities for growth, promoting inclusive decision-making, and ensuring that everyone's perspective is considered. Saying yes to VEG means helping us build a culture where your unique experiences and background contribute to a shared vision: being the world’s veterinary emergency company.

ABOUT VEG

In 2014, VEG was born with a mission to help people and their pets when they need it most. This meant challenging the status quo and fixing everything that was wrong with the ER experience. Since then, we’ve expanded rapidly, with hospitals nationwide open 24/7, 365 days a year, and created a better emergency experience—not only for people and their pets, but also for everyone who works here—our VEGgies!

At VEG we find a way to say yes to the career you want in veterinary emergency medicine. This means transforming how ER works, from our open-concept hospitals, where you can handle emergency cases of every kind (even exotics!) to our immersive, customer-focused experience, which helps us give people and their pets the care they deserve.

This also means saying yes to creating the best experience possible for our VEGgies. Yes to working in an environment where you can find your place and feel valued for the amazing work you do. Yes to having unparalleled opportunities for learning and mentorship so you can grow where you want to go in your career. And yes to making an impact here in ways you never thought possible.

VEG is a 2025 and 2026 certified Great Place to Work®.

THE JOB

At VEG, we don’t just hire assistants—we grow future emergency rockstars. As an Emergency Veterinary Assistant, you’ll be in the heart of the action from day one, supporting your team, comforting pet parents, and learning the ropes in real time. You’ll be there for everything—the triage, the treatments, and the tail wags. You’re embarking on a path where careers start, grow, and thrive. Whether you’re on your way to becoming a credentialed technician or exploring where your passion can take you, we’ll say yes to your growth every step of the way.

WHAT YOU’LL DO*

• Be the first warm welcome and a steady support, triaging incoming patients and helping guide them toward care
• Assist with treatments, nursing care, and diagnostics, from bloodwork and imaging to catheter placement and oxygen support
• Work alongside our credentialed veterinary technicians and veterinarians to set up and monitor anesthesia and sedation cases
• Set up and manage IV fluids, blood transfusions, and medication administration
• Assist during every moment of care: outpatient or inpatient, exam room to treatment area
• Join patient rounds and stay close to the clinical picture to ensure continuity of care
• Learn how to perform CPR and become a RECOVER Certified Rescuer (training provided!)
• Grow into more advanced responsibilities, such as anesthesia support, ultrasound, and catheterization through guided training pathways

*As permitted by state law

WHAT YOU NEED

• High school diploma or equivalent required
• Enrolled in an AVMA-accredited veterinary technology program a plus
• 1+ years in a veterinary assistant role (emergency or specialty experience is a bonus!)
• Basic computer skills and an understanding of practice management software and electronic medical record keeping
• Excellent communicator when collaborating with pet parents and your team
• Fine motor skills for handling patients and medical equipment
• Ability to stand for prolonged hours, kneel, and work on the floor as well as ability to lift up to 25 kg on own and able to support up to 40 kg with assistance
• Must be willing to work in a noisy environment with strong or unpleasant odors
• Availability to work nights, weekends, and holidays on a rotating or as needed basis based on hospital demands
• Ability to work well in a fast-paced environment with people from all backgrounds and different personality types

WHO YOU ARE

• Empathetic, instinctively taking a people-centric approach, whether supporting your colleagues or making an effort to understand different perspectives
• Have a sense of humility; acknowledging mistakes, sharing credit with others, and lifting up your team’s’ accomplishments
• Feel a strong sense of ownership over your work, taking responsibility for outcomes and staying committed to achieving long-term, impactful results 
• Curious by nature; you ask insightful questions and continuously seek out opportunities to learn and grow your skills and knowledge

HOW WE INVEST IN YOU

• Competitive compensation, including base and 401K match
• Comprehensive health and wellness benefits that start on day one, including medical, dental, and vision coverage, QPR training, and access to free therapy or counseling
• Depending on your role, you may be eligible for equity after one year of full time, active employment with VEG, so you can share in our growth and success
• A BIG focus on learning and growth, from VEG-created clinical and leadership programs to unlimited ER CE + travel stipend (no really!). Full-time credentialed VEGgies receive a $2,500/year travel stipend. Full-time uncredentialed VEGgies receive a $1,000/year travel stipend.
• Clinical student loan repayment so you don’t need to worry about your student debt
• Paid parental leave; up to 12 weeks at 100% of regular salary and inclusive fertility and family-building care for all types of families
• Flexible work schedules to support your life outside of work
• Generous employee referral program, so our awesome people can bring in more awesome people
• And the little (big) things, like comfy scrubs, cool VEG swag, and food in the fridge for when you’re hungry

DEI

At VEG, diversity is not just a word—it's a strength that fuels innovation and kindness. Our mission is “Helping people and their pets when they need it most.” And we do that better when our VEGgies (employees) feel valued, respected, and empowered to bring their authentic selves to work. That's why we're devoted to creating an environment that reflects the diverse communities we serve—where different perspectives are not only welcomed but celebrated.

We are focused on providing equitable opportunities for growth, promoting inclusive decision-making, and ensuring that everyone's perspective is considered. Saying yes to VEG means helping us build a culture where your unique experiences and background contribute to a shared vision: being the world’s veterinary emergency company.

ABOUT VEG

In 2014, VEG was born with a mission to help people and their pets when they need it most. This meant challenging the status quo and fixing everything that was wrong with the ER experience. Since then, we’ve expanded rapidly, with hospitals nationwide open 24/7, 365 days a year, and created a better emergency experience—not only for people and their pets, but also for everyone who works here—our VEGgies!

At VEG we find a way to say yes to the career you want in veterinary emergency medicine. This means transforming how ER works, from our open-concept hospitals, where you can handle emergency cases of every kind (even exotics!) to our immersive, customer-focused experience, which helps us give people and their pets the care they deserve.

This also means saying yes to creating the greatest experience possible for our VEGgies. Yes to working in an environment where you can find your place and feel valued for the amazing work you do. Yes to having unparalleled opportunities for learning and mentorship so you can grow where you want to go in your career. And yes to making an impact here in ways you never thought possible.

VEG is a 2025 and 2026 certified Great Place to Work®.

THE JOB

As a per diem Emergency Credentialed Veterinary Technician, you’re part of a team that thrives on the front lines of emergency veterinary care where every second counts. You’ll handle a wide range of cases, from minor to complex emergencies, collaborating with our doctors and team in delivering gold standard, emotionally intelligent care. You’ll jump into triage, treatments, diagnostics, anesthesia, monitoring, and critical care nursing, all while being a steady, compassionate presence for pet parents in their most stressful moments. This role is for someone who wants to do the work they were trained to do (and more), continue growing their skills, and help people and their pets when they need it most.

WHAT YOU’LL DO

• Treat every patient and person like they matter—because they do! You keep people and pets together and stay by their side through tests, treatments, and everything in between
• Jump into action, delivering nursing care, treatments, and emotional support in the most critical moments, from first triage to discharge
• Bring the meds, the monitoring, the mastery—from IVs and CRIs to blood transfusions and beyond
• Communicate like a teammate and think like a leader, helping shape plans and keep care flowing
• Be ready to perform CPR like the trained RECOVER rockstar you are (not only do we offer training, we have the highest number of RECOVER CPR professionals and instructors in the industry!)
• All the techy stuff—from diagnostics and imaging to sample collection and placing tubes
• Anesthesia, even for our most fragile patients? You’ve got it.
• Use all the advanced techniques in your toolkit: central lines, endoscopy, ultrasounds, and more

WHAT YOU NEED

• High school diploma or equivalent required; associate’s degree or higher in veterinary technology from an AVMA accredited program strongly preferred
• Credentialed as a veterinary technician (CVT, RVT, LVT, LVMT) in the state the VEG practice is located is required; VTS in ECC, internal medicine or anesthesia/analgesia is a plus and will lead to extra considerations in compensation.
• 1+ years of experience in a veterinary technician role; experience in emergency or specialty medicine preferred
• Basic computer skills and a comprehension of practice management software and electronic medical record keeping
• Excellent communicator and calm under pressure; ready to lend a hand to support those around you
• Fine motor skills for handling patients and medical equipment
• Ability to stand for prolonged hours, kneel, and work on the floor as well as ability to lift up to 25 kg on own and able to support up to 40 kg with assistance
• Must be willing to work in a noisy environment with strong or unpleasant odors
• Availability to work nights, weekends, and holidays on a rotating or as needed basis based on hospital needs
• Work well in a fast-paced environment with people from all backgrounds and different personality types

WHO YOU ARE

• Empathetic, instinctively taking a people-centric approach, whether supporting your colleagues or making an effort to understand different perspectives
• Have a sense of humility; acknowledging mistakes, sharing credit with others, and lifting up your team’s’ accomplishments
• Feel a strong sense of ownership over your work, taking responsibility for outcomes and staying committed to achieving long-term, impactful results 
• Curious by nature; you ask insightful questions and continuously seek out opportunities to learn and grow your skills and knowledge

HOW WE INVEST IN YOU

• Competitive compensation
• Flexible work schedules to support your life outside of work
• Generous employee referral program, so our awesome people can bring in more awesome people
• And the little (big) things, like comfy scrubs, cool VEG swag, food in the fridge for when you’re hungry

DEI

At VEG, diversity is not just a word—it's a strength that fuels innovation and kindness. Our mission is “Helping people and their pets when they need it most.” And we do that better when our VEGgies (employees) feel valued, respected, and empowered to bring their authentic selves to work. That's why we're devoted to creating an environment that reflects the diverse communities we serve—where different perspectives are not only welcomed but celebrated.

We are focused on providing equitable opportunities for growth, promoting inclusive decision-making, and ensuring that everyone's perspective is considered. Saying yes to VEG means helping us build a culture where your unique experiences and background contribute to a shared vision: being the world’s veterinary emergency company.

ABOUT VEG

In 2014, VEG was born with a mission to help people and their pets when they need it most. This meant challenging the status quo and fixing everything that was wrong with the ER experience. Since then, we’ve expanded rapidly, with hospitals nationwide open 24/7, 365 days a year, and created a better emergency experience—not only for people and their pets, but also for everyone who works here—our VEGgies!

At VEG we find a way to say yes to the career you want in veterinary emergency medicine. This means transforming how ER works, from our open-concept hospitals, where you can handle emergency cases of every kind (even exotics!) to our immersive, customer-focused experience, which helps us give people and their pets the care they deserve.

This also means saying yes to creating the greatest experience possible for our VEGgies. Yes to working in an environment where you can find your place and feel valued for the amazing work you do. Yes to having unparalleled opportunities for learning and mentorship so you can grow where you want to go in your career. And yes to making an impact here in ways you never thought possible.

VEG is a 2025 and 2026 certified Great Place to Work®.

THE JOB

At VEG, we don’t just hire assistants—we grow future emergency rockstars. As a per diem Emergency Veterinary Assistant, you’ll be in the heart of the action from day one, supporting your team, comforting pet parents, and learning the ropes in real time. You’ll be there for everything—the triage, the treatments, and the tail wags. You’re embarking on a path where careers start, grow, and thrive. Whether you’re on your way to becoming a credentialed technician or exploring where your passion can take you, we’ll say yes to your growth every step of the way.

WHAT YOU’LL DO*

• Be the first warm welcome and a steady support, triaging incoming patients and helping guide them toward care
• Assist with treatments, nursing care, and diagnostics, from bloodwork and imaging to catheter placement and oxygen support
• Work alongside our credentialed veterinary technicians and veterinarians to set up and monitor anesthesia and sedation cases
• Set up and manage IV fluids, blood transfusions, and medication administration
• Assist during every moment of care: outpatient or inpatient, exam room to treatment area.
• Join patient rounds and stay close to the clinical picture to ensure continuity of care.
• Learn how to perform CPR and become a RECOVER Certified Rescuer (training provided!)
• Grow into more advanced responsibilities, such as anesthesia support, ultrasound, and catheterization through guided training pathways

*As permitted by state law

WHAT YOU NEED

• High school diploma or equivalent required
• Enrolled in an AVMA-accredited veterinary technology program a plus
• 1+ years in a veterinary assistant role (emergency or specialty experience is a bonus!)
• Basic computer skills and an understanding of practice management software and electronic medical record keeping
• Excellent communicator when collaborating with pet parents and your team
• Fine motor skills for handling patients and medical equipment
• Ability to stand for prolonged hours, kneel, and work on the floor as well as ability to lift up to 25 kg on own and able to support up to 40 kg with assistance
• Must be willing to work in a noisy environment with strong or unpleasant odors.
• Availability to work nights, weekends, and holidays on a rotating or as needed basis based on hospital needs
• Work well in a fast-paced environment with people from all backgrounds and different personality types

WHO YOU ARE

• Empathetic, instinctively taking a people-centric approach, whether supporting your colleagues or making an effort to understand different perspectives
• Have a sense of humility; acknowledging mistakes, sharing credit with others, and lifting up your team’s’ accomplishments
• Feel a strong sense of ownership over your work, taking responsibility for outcomes and staying committed to achieving long-term, impactful results 
• Curious by nature; you ask insightful questions and continuously seek out opportunities to learn and grow your skills and knowledge

HOW WE INVEST IN YOU

• Competitive compensation
• Flexible work schedules to support your life outside of work
• Generous employee referral program, so our awesome people can bring in more awesome people
• And the little (big) things, like comfy scrubs, cool VEG swag, food in the fridge for when you’re hungry

DEI

At VEG, diversity is not just a word—it's a strength that fuels innovation and kindness. Our mission is “Helping people and their pets when they need it most.” And we do that better when our VEGgies (employees) feel valued, respected, and empowered to bring their authentic selves to work. That's why we're devoted to creating an environment that reflects the diverse communities we serve—where different perspectives are not only welcomed but celebrated.

We are focused on providing equitable opportunities for growth, promoting inclusive decision-making, and ensuring that everyone's perspective is considered. Saying yes to VEG means helping us build a culture where your unique experiences and background contribute to a shared vision: being the world’s veterinary emergency company.

ECOSEC

What We Do

Our ECOSEC team provides a safer experience for Epic's users. We work across multiple products and services to improve technology and craft transparent policies so our players and users can have positive experiences on our platforms.

What You'll Do

Epic Games is looking for a Senior Security Engineer focused on Game Security to develop and improve anti-cheat capabilities within our games. Your efforts will be critical to the success of Fortnite and the many creators who depend on it. The ideal candidate would have prior experience in developing gameplay features and backend services. We are particularly interested in those that have prior experience working with Unreal Engine. Your primary focus will be on the dedicated server and backend code, but you will partner closely with teams writing client code as well as game teams, ensuring that the underlying systems that are built are full-featured, resilient, and secure. This is an incredible opportunity to create a safe environment for millions of players and advance industry best practices.

In this role, you will

• Design and build new backend services or features that power Fortnite anti-cheat or related security capabilities, as well as implementing corresponding game code
• Read, debug, and write code for Fortnite in C++ and associated backend services in Go
• Proactively seek out vulnerable components in the Fortnite game client or backend, then clearly communicate the problem and recommended solution, implementing it as well if appropriate Influence others to maintain a security oriented mindset
• Debug, modify, and optimize existing security systems for both the Fortnite game client and backend components
• Ensure Fortnite is operating well for players and that our services are resilient at scale. Assist in diagnosing and resolving Live issues

What we're looking for

• BSc in Computer Science/Software Engineering or related subject - candidates without a degree are welcome as long as they have proven extensive hands-on experience
• Excellent knowledge and debugging skills in the C++ programming language
• Fluency in Go, Java, C#, or similar programming language
• Self-starter, you approach challenges creatively and methodically, seeing them through to final resolution
• Ability to code and architect system frameworks, new APIs, and tools. Versed in software programming principles
• Understanding of online multiplayer video game architectures
• Technical understanding of the structure and technology stacks of online service backends
• User-focused, passionate, solutions-focused, and innovative. These traits equal success at Epic and influence everything we do

EPIC JOB + EPIC BENEFITS = EPIC LIFE

Our intent is to cover all things that are medically necessary and improve the quality of life. We pay 100% of the premiums for both you and your dependents. Our coverage includes Medical, Dental, a Vision HRA, Long Term Disability, Life Insurance & a 401k with competitive match. We also offer a robust mental well-being program through Modern Health, which provides free therapy and coaching for employees & dependents. Throughout the year we celebrate our employees with events and company-wide paid breaks. We offer unlimited PTO and sick time and recognize individuals for 7 years of employment with a paid sabbatical.

Work Arrangement
This is a full-time, on-site position with a waterfall schedule and shift work. Possibility of CONUS/OCONUS deployments.

Job Overview

This position serves as an Unmanned Aircraft System (UAS) Pilot in Command (PIC), supporting Department of Defense customers at the national, theater, operational, or tactical level. The AVO is responsible for all aspects of mission planning and execution, including preflight, launch, flight, landing, and post-flight tasks. They also monitor all aircraft systems throughout the mission to ensure safe and legal operations. The role includes coordinating ground and flight activities, maintaining situational awareness of mission environments, providing Mission Commander support when not acting as PIC, and producing PowerPoint presentations. Candidates must have strong technical and communication skills, UAS experience, and the ability to work extended hours in a team-focused, fast-paced operational environment. This position requires relocation to a CONUS duty location and the ability to meet all DoD and FAA requirements.

Essential Functions

• Acts as Pilot in Command (PIC) of Unmanned Aircraft System (UAS).
• Provide Mission Coordinator/Commander support to the team when not acting as PIC.
• Primarily support higher-tier, longer-endurance systems, driven by national or theater-level customers.
• Demonstrates the ability to perform mission planning and coordination activities under varying airspace conditions.
• Demonstrate sound, timely decision-making based on aircraft performance, mission requirements, and operational safety.
• Maintain a broad and up-to-date situational awareness of current mission operations; quickly gain understanding of current mission target environments and associated dynamics; and be familiar with operational methods and infrastructure.
• Understands government defense industry policies and procedures related to operating aircraft and supporting customer requirements.
• Meets/exceeds minimum performance standards as outlined in the master training syllabi.
• Relocate to CONUS duty location
• Performs other related duties as directed.

Standard Essential Functions

• Regular and reliable attendance on a full time basis [or in accordance with posted schedule].
• Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices.
• Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications and Competencies

• Proficient computer skills: Office Suite, specifically spreadsheets, collaboration/communication applications, and manipulation of Adobe forms a must
• Must be a US citizen with a valid US passport.
• Ability to meet combatant command theatre entry requirements (e.g., CENTCOM)
• Ability to meet all DoD Contractor deployment requirements and pass Combat Readiness Course.
• Excellent verbal and written communication skills.
• Ability to pre-employment background check.
• Ability to professionally interface with numerous levels of management, customers, and peers.
• Ability to work extended hours and/or shift work.
• Ability to work in a team environment while accomplishing mission requirements.

Education / Certifications

• Must have a High School Diploma/GED or equivalent.
• Must have:(Customer Requirement)
• FAA Private Pilot’s License (PPL)
• Instrument rating
• Must possess a current FAA Class II Medical Certificate.

Experience

• At least 100+ flight hours on UAS platforms acting as PIC
• Minimum 2-4 years of relative experience and knowledge of basic UAS flight systems and operations.
• Manned Aviation Experience - 500-1000 hours preferred
• UAS Flight Hours (Group 3+ preferred) - 200-500 UAS PIC
• Experience controlling aircraft Beyond Line of Sight and associated data links
• Experience with Piccolo PCC or other Auto Pilot systems
• Work Experience in the aviation field in OCONUS (deployed) / CONUS locations.

Physical Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is:

Constantly required to sit, and to reach to use computers and other office equipment
Constantly required repetitive movements of wrists, hands, and/or fingers
Occasionally required to lift up to 25 pounds
Constantly required to view objects up close and distant range with hand eye coordination
Occasionally experience a high level of noise, adverse weather or temperature conditions

• Must meet industry-standard physical requirements to ensure the safe and effective performance of duties. While the role does not typically involve strenuous physical activity, candidates should possess adequate physical fitness and health to withstand the demands of flight operations.

Security Clearance

• Ability to obtain/maintain a Secret DoD clearance, U.S. Citizenship required.

Client Service Representative

• Greet clients and patients warmly, providing professional, empathetic, and attentive service while answering in-person inquiries promptly. 
• Complete patient check-in and check-out efficiently while serving as a liaison with hospital staff and communicating real-time patient status and flow changes. 
• Maintain client communications via phone, email, and mail, including follow-ups and thank-you messages. 
• Schedule, confirm, and forward book appointments, routing requests appropriately; triage patients based on urgency. 
• Communicate clearly about hospital services, wellness care, vaccinations, diagnostics, surgical aftercare, and specialty packages. 
• Handle sensitive situations (e.g., euthanasia, test results, payments) with tact and professionalism. 
• Maintain accurate patient records, request and attach prior records, and ensure charges are captured. 
• Complete cash reconciliation, end-of-day financial tasks, and bank deposits while accurately processing payments and refunds, including transactions through Care Credit and credit card terminals. 
• Fill veterinary prescriptions accurately and provide instructions to clients. 
• Assist with over-the-counter product sales and maintain inventory. 
• Support veterinarians, technicians, and Practice Manager with patient care and administrative tasks. 
• Maintain a clean, organized, and safe hospital environment; follow safety and hygiene protocols. 
• Participate in opening, closing, and weekend duties as assigned. 
• As part of this role, calls may be recorded to help ensure we are meeting client needs and to support quality assurance and training efforts. 
• Perform all other duties as assigned.   

• High school diploma or equivalent required. 
• Previous experience working with animals preferred; veterinary or animal care background strongly valued. 
• Basic computer proficiency, including the ability to use computer systems, email, practice management software, Microsoft Office applications, and basic scheduling tools. 
• Accurate data entry and record-keeping skills. 
• Able to perform basic math for cash handling, billing, and appointment management. 
• Manual dexterity required for typing, filing, and handling patients or supplies. 
• Strong written and verbal communication skills; able to communicate clearly with clients, team members, and veterinarians. 
• Demonstrated ability to provide professional, empathetic, and client-focused service while maintaining composure in high-stress or emotionally challenging situations. 
• Ability to lift and carry up to 50 pounds and safely handle animals up to 130 pounds. 
• Comfortable sitting, standing, walking, bending, and kneeling for extended periods throughout the workday.  
• Professional, neat appearance consistent with hospital standards. 

• Must be able to work a flexible schedule and be available for scheduling during all hours the practice is open to support hospital operations 

• We offer a comprehensive benefits package that includes medical, dental, and vision coverage. In addition, employees are eligible to participate in our 401(k) retirement plan. Other benefits include paid time off, paid holidays and access to employee assistance program.