All active Test Engineer roles based in Fort Worth.
Pick a job to read the details
Tap any role on the left — its description and apply link will open here.
Share this job
At Zone 5 Technologies, we're redefining what's possible in unmanned aircraft systems. Our team of engineers and innovators is developing cutting-edge autonomous solutions that push the boundaries of UAS technology - solving complex challenges that matter.
We're building the future of UAS capabilities, and we're looking for exceptional talent to join us. If you're driven by hard problems, energized by rapid innovation, and ready to make an impact on next-generation flight systems, you belong here.
We're looking for a Mechanical Engineer V/VI for Unmanned Aircraft Systems (UAS) which is a senior-level role responsible for leading the design, development, and implementation of advanced mechanical systems for UAVs. This position involves strategic oversight, innovative problem-solving, and mentorship of junior engineers. Engineers in this role will contribute to cutting-edge advancements in UAS technologies, driving innovation in areas such as autonomous systems, additive manufacturing, and aerospace materials.
Key Responsibilities:
Strategic Design Leadership: Lead the design of complex mechanical systems for UAVs, including advanced airframes, propulsion systems, and payload integration.
Advanced Prototyping and Testing: Oversee the development and testing of UAV prototypes, ensuring compliance with performance and reliability goals.
Comprehensive Structural Analysis: Conduct and review in-depth stress, strain, and fatigue analysis for UAV mechanical systems operating under extreme conditions.
Thermal Management Expertise: Develop and implement innovative thermal systems for high-performance UAVs.
Cross-Functional Integration: Lead collaboration with multidisciplinary teams to integrate mechanical systems with avionics, sensors, and software controls.
Material Innovation: Drive research and development of advanced materials for UAV applications, focusing on composites and lightweight alloys.
Failure Analysis and Solutions: Lead root cause analysis of mechanical failures and propose long-term, impactful solutions.
Regulatory Compliance Leadership: Ensure all designs meet and exceed UAS regulations and industry certifications.
Research and Development: Spearhead R&D initiatives to advance UAS technologies, including autonomous navigation and advanced manufacturing techniques.
Mentorship and Leadership: Provide technical guidance and mentorship to junior and mid-level engineers, fostering professional growth within the team.
Documentation and Reporting: Author comprehensive technical documentation, including design reviews, test reports, and compliance certifications.
Qualifications:
Skills:
Preferred Qualifications:
Pay Range by Level for Fort Worth, Texas:
Level V - $165k - $189k
Level VI - $189k - $207k
What's in it for you:
Benefits:
Why Join Zone 5 Technologies?
If you are passionate about unmanned aircraft technology and want to be a part of a dynamic and growing company, we would love to hear from you. Apply today and join the Zone 5 Technologies team!
In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire.
Zone 5 Technologies is a federal contractor and participates in E-Verify to confirm employment eligibility. As required by law, we will verify the identity and employment authorization of all new employees using the E-Verify system. Learn more about your rights and responsibilities under E-Verify: https://www.e-verify.gov.
Ready to apply?
Apply to Zone 5 Technologies
Share this job
About Otto Aerospace
OTTO is developing the world’s first fifth-generation business jet, designed for sustainability through the innovative use of advanced super-laminar aerodynamics and high-precision, net-shaped composites. Flight tests of our technology demonstrator validate a dramatic reduction in fuel burn and allow a sizeable improvement in cabin comfort. Otto Aviation is designing world-class aircraft from first principles physics and delivering ground-breaking aircraft and economic performance.
Role Overview
Otto Aerospace is seeking an Engineer, Airframe Stress Analysis to be a member of our team. The ideal candidate has relevant stress analysis experience and a willingness to learn. You will join a team developing the world’s most efficient aircraft. Otto Aviation is seeking engineers, who are comfortable working from first principles, work great in a team atmosphere and get things done.
Responsibilities
Qualifications/Requirements
Interpersonal Skills
Where You'll Be
**This position will be on-site at our Ft Worth, TX facility. It will eventually transition to our new headquarters in Jacksonville, FL in 1-2 years
Benefits
Otto Aerospace provides a robust benefits package that includes competitive salaries, subsidized medical, dental, and vision coverage, 401(k) opportunities, paid short-term disability, voluntary long-term disability and additional term life, with 15 paid days off, 13-14 paid holidays, and paid sick leave. Depending on seniority and role, some roles qualify for potential bonuses and stock options.
Otto Aerospace is an Equal Opportunity Employer
We are committed to diversity, equity, and inclusion in every aspect of our hiring process. All applicants will be considered for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability. We believe that a diverse team brings fresh perspectives, innovative ideas, and greater success. The more inclusive we are, the stronger we become. Applicants must be legally authorized to work in the U.S.
#LI-Onsite
Ready to apply?
Apply to Otto Aerospace
Zipline is the world’s largest and most experienced drone delivery service. We are on a mission to serve all humans equally by ensuring access to food, medicine and essential goods anytime, anywhere. We design, build, and operate the world’s largest autonomous logistics system, delivering critical supplies quickly and reliably. Today, Zipline operates on four continents, makes a delivery somewhere in the world every 30 seconds, and has completed millions of deliveries to date, including blood, vaccines, medical supplies, food, and retail products.
Our customers include the world’s largest and most prominent healthcare systems, governments, retailers, restaurants and global businesses who rely on us to save lives, reduce emissions, increase economic opportunity, and provide delivery from point A to point B as fast as possible. The drone is only 15% of what we’ve built to enable seamless, reliable, global operations.
Our system strengthens supply chains, reduces congestion, and gives people time back. With more than 140 million commercial autonomous miles safely flown, Zipline is redefining access to healthcare, consumer products, and food across the globe.
We operate at a global scale and are looking for practical problem solvers who thrive on real-world challenges and rapid growth. Our team is motivated by building systems that have a direct, meaningful impact on people’s lives and by scaling the future of logistics. We are seeking people who sculpt from first principles, enjoy facing adversity, and can do the impossible at record breaking speeds.
Do you thrive in high-pressure environments where every minute counts and your decisions directly impact life-saving deliveries? The Service Engineering team sits at the critical nexus between operations and engineering, serving as the first line of technical support for our global fleet of aircraft, droids, and docks. When assets go down, customers can't receive essential supplies—there's no room for delay.
Our Service Engineers are the elite troubleshooters who ensure grounded assets return to service with maximum velocity and quality. You'll work in 24/7 shift operations, serving as the primary technical lead who coordinates cross-team resources, diagnoses complex technical issues, and maintains the operational tempo that keeps Zipline flying around the world.
This role operates under strict regulatory requirements (FAA Part 135) and demanding performance targets to minimize time to service restoration and maximizing first-time fix rates. You'll serve both Flight Test and Commercial Operations, making your work essential to every delivery we make.
As a Service Engineer, you'll lead technical response as the primary technical lead for grounded assets, coordinating cross-team resources and driving resolution with urgency and precision. Your systematic troubleshooting approach will use approved procedures and diagnostic tools to identify root causes and implement solutions for aircraft, droid, and dock systems. Working in 24/7 shift operations forms a core part of your responsibilities, including comprehensive handovers, on-call duties, and emergency response protocols to maintain continuous coverage.
You'll coordinate cross-team escalation to engineering support and maintenance teams, creating work orders and ensuring smooth handoffs when physical maintenance is required. Log analysis and diagnostics will become second nature as you identify patterns, troubleshoot complex technical issues, and generate reports that drive continuous improvement. Maintaining regulatory compliance with FAA Part 135 operations, CAMP requirements, and repairman certification standards ensures all documentation meets aviation industry standards.
Driving continuous improvement will be central to your role as you contribute to troubleshooting guides, identify automation opportunities, and provide feedback to design engineering on system improvements. You'll operate advanced tools including the Zipline ERP (Zerp) platform, Fleet Apps, incident.io, and Jira to track assets, manage incidents, and coordinate with global teams. Asset triage and prioritization will maximize operational impact, ensuring critical assets return to service first while managing multiple incidents simultaneously.
Documentation and tracking of all troubleshooting activities, resolutions, and lessons learned builds institutional knowledge and supports regulatory requirements.
The starting cash range for this role is $68,000 - $145,000. Please note that this is a target, starting cash range for a candidate who meets the minimum qualifications for this role. The final cash pay for this role will depend on a variety of factors, including a specific candidate's experience, qualifications, skills, working location, and projected impact. The total compensation package for this role may also include: equity compensation; overtime pay; discretionary annual or performance bonuses; sales incentives; benefits such as medical, dental and vision insurance; paid time off; and more.
This role requires working 24/7 shift operations including nights, weekends, and holidays as part of our continuous coverage model. You'll participate in on-call rotations and must be available for rapid response when critical assets are grounded.
The position operates under strict performance metrics and regulatory requirements. You'll work in a fast-paced, high-stakes environment where your decisions directly impact customer deliveries and operational safety.
Ability to sit (or stand at a standing desk) for long periods of time to review tickets, conduct analysis and coordinate solutions with engineers when needed.
Travel may be required occasionally for training, certification, or site support activities (10%).
You are eligible to work in the US.
Ready to apply?
Apply to Zipline
Share this job
At Zone 5 Technologies, we're redefining what's possible in unmanned aircraft systems. Our team of engineers and innovators is developing cutting-edge autonomous solutions that push the boundaries of UAS technology - solving complex challenges that matter.
We're building the future of UAS capabilities, and we're looking for exceptional talent to join us. If you're driven by hard problems, energized by rapid innovation, and ready to make an impact on next-generation flight systems, you belong here.
We're looking for an experienced Mechanical Engineer for unmanned aircraft systems (UAS) is responsible for the design, development, and optimization of mechanical systems for unmanned aerial vehicles (UAVs) and other aerospace applications. This role focuses on creating innovative and reliable mechanical components for UAVs, ensuring their structural integrity, performance, and compliance with industry standards. The engineer will work with cross-functional teams to advance UAS technologies in sectors such as defense, commercial aviation, and space exploration.
Responsibilities:
Qualifications:
Skills:
Preferred Qualifications:
Pay Range by Level for Dallas/Fort Worth, TX
Level III - $109k - $137k
Level IV - $137k - $165k
What's in it for you:
Benefits:
Why Join Zone 5 Technologies?
If you are passionate about unmanned aircraft technology and want to be a part of a dynamic and growing company, we would love to hear from you. Apply today and join the Zone 5 Technologies team!
In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire.
Zone 5 Technologies is a federal contractor and participates in E-Verify to confirm employment eligibility. As required by law, we will verify the identity and employment authorization of all new employees using the E-Verify system. Learn more about your rights and responsibilities under E-Verify: https://www.e-verify.gov.
Ready to apply?
Apply to Zone 5 Technologies
Share this job
Texas AirSystems has been shaping the HVAC landscape in Texas for over four decades. With 500+ team members and seven offices statewide, we partner with over 60 leading manufacturers to deliver custom, high-performance solutions that stand the test of time.
Here, your work matters. You’ll be part of a team that values collaboration, rewards curiosity, and gives you the tools to keep growing. Whether you’re just getting started or looking for your next big challenge, this is a place where you can thrive and make a real impact.
Reports to: Account Manager/Account Executive or Sales Leader
Location: Fort Worth, TX
FLSA Status: Exempt
Note: This posting is for current Engineering Students with anticipated graduation dates of December 2025 or May 2026.
The Opportunity
This is an entry-level role learning all aspects of Texas AirSystems products and systems to estimate and manage projects. As the Project Engineer, this individual will be responsible for coordinating submittals, equipment selection, pricing and ship dates for each project. Must be detail and customer service oriented and have excellent organizational skills. Position requires a high level of oral and written correspondence with the Sales Team, Customers and Manufacturers to ensure timely completion of assigned projects while maintaining customer satisfaction. Must be able to work well with others in a fast-paced & high-volume environment.
Responsibilities
The Required Profile
Other Skills/Abilities
Strategic Skills
Ability to learn new skills and knowledge. Ability to understand concepts and complexity comfortably. Open to change and will try anything to find solutions. Able to handle uncertainty and make decisions without knowing the whole story
Operating Skills
Ability to discern between tasks to determine how best to accomplish goals and organize task/people assignments to get results in a timely way. Ability to figure out processes and simplify them in order to maximize work flow.
Behavior Skills
Ability to manage people and situations when conflicts arise. Ability to seize opportunities with the drive to complete goals.
Personal and Interpersonal Skills
Ability to establish and grow relationships with customers through effective verbal and written communication. Dedicated to the needs of the customers, manufacturers and peers and has the patience to actively listen to all business partners. Able to solve problems and skillfully negotiate with a minimum of noise while managing stress. Demonstrates integrity and trust through appropriate directness and truthfulness. Ability to understand personal strengths and weaknesses, seek feedback and improve upon shortcomings.
Environmental Requirements
Will be required to work in an office environment and frequently in the field.
Physical Demands
While performing the duties of this job, the employee is regularly required to use hands to operate computer keyboard and telephone, reach with hands and arms. The employee frequently is required to stand, walk, and sit. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.
NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization.
Employment practices will not be influenced or affected by an applicant’s or employee’s race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Reasonable accommodations will be made for qualified individuals with disabilities unless doing so would result in an undue hardship.
Salary ranges listed are dependent upon a candidate’s qualifications, experience, internal equity, and the budgeted amount for the specific role and location.
Ready to apply?
Apply to Texas AirSystems
Share this job
At My Funded Futures, we’re transforming the world of proprietary trading by giving traders the capital, tools, and community they need to succeed.
We blend innovation, transparency, and performance to create opportunity — helping traders scale faster and smarter. If you’re passionate about fintech, financial markets, and data-driven growth, you’ll fit right in.
Explore our open roles below and see how you can help us shape the future of funded trading.
Join MyFundedFutures as the next QA Engineer responsible for ensuring that every release that reaches production meets a high bar for quality, stability, and correctness. This is a hands-on role with genuine ownership. You are the gate between code-complete and thousands of users.
You will work closely with product and engineering to define acceptance criteria, have thorough manual test and debugging skills, own the staging environment, build and maintain automation coverage and drive a culture where quality is everyone's responsibility and QA is the last line of defence, not an afterthought.
Equal Employment Opportunity
My Funded Futures is an equal opportunity employer. We believe that diversity drives innovation and success. We are committed to building an inclusive environment where every team member feels valued, respected, and supported—regardless of race, color, religion, gender, gender identity, sexual orientation, national origin, age, disability, veteran status, or any other protected characteristic.
In compliance with pay transparency laws, My Funded Futures provides compensation ranges in job postings where required. Final compensation may vary based on experience, qualifications, and location. We also offer comprehensive benefits and performance-based incentives.
If you require assistance or an accommodation during the application process, please contact our HR team at careers@myfundedfutures.com.
Applicants must be authorized to work in the applicable country without employer sponsorship. The Company does not offer visa sponsorship or immigration assistance for this position.
Ready to apply?
Apply to MyFunded Futures
Share this job
At Zone 5 Technologies, we're redefining what's possible in unmanned aircraft systems. Our team of engineers and innovators is developing cutting-edge autonomous solutions that push the boundaries of UAS technology - solving complex challenges that matter.
We're building the future of UAS capabilities, and we're looking for exceptional talent to join us. If you're driven by hard problems, energized by rapid innovation, and ready to make an impact on next-generation flight systems, you belong here.
The RF Engineer leads the design, analysis, and integration of RF and antenna systems across Zone 5 products. This role is responsible for developing high-performance communication and RF architectures that operate reliably in complex electromagnetic environments.
You will work across the full lifecycle—from concept and trade studies through integration, test, and production—partnering closely with Electrical Engineering, Systems Engineering, Software, Integration, and Test to deliver robust, scalable RF solutions.
Key Responsibilities
Qualifications
Required
Preferred
Pay Range by Level for Fort Worth, TX:
Level IV - $141k - $171k
Level V - $171k - $199k
Level VI - $199k - $230k
What's in it for you:
Benefits:
Why Join Zone 5 Technologies?
If you are passionate about unmanned aircraft technology and want to be a part of a dynamic and growing company, we would love to hear from you. Apply today and join the Zone 5 Technologies team!
In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire.
Zone 5 Technologies is a federal contractor and participates in E-Verify to confirm employment eligibility. As required by law, we will verify the identity and employment authorization of all new employees using the E-Verify system. Learn more about your rights and responsibilities under E-Verify: https://www.e-verify.gov.
Ready to apply?
Apply to Zone 5 Technologies
Share this job
US Conec, Ltd.
Engineering Innovation. Precision Plastics. Powering AI.
US Conec, Ltd. is a trusted, global company that prides itself on engineering excellence—creating innovative connectivity solutions that support today’s most important technologies. We foster a friendly, inclusive culture that values teamwork, creativity, and mutual respect. At US Conec, you’ll find real opportunities to grow and make a meaningful impact in a company that genuinely cares about its people and its customers. With competitive compensation, excellent benefits, and a supportive environment, this is a place where you can build your future—whether your interests lie in manufacturing, engineering, operations, or beyond.
Product Quality Engineer
Overview
US Conec is seeking a detail-driven Product Quality Engineer to champion product excellence across the lifecycle of precision-engineered components and assemblies. In this role, you’ll develop, maintain, and improve quality standards and documentation for molded and assembled products. You’ll collaborate cross-functionally with Engineering, Manufacturing, and Suppliers to apply your expertise in dimensional inspection, process validation, and root cause analysis—ensuring our products meet the highest performance and reliability standards. Your work will directly support our mission to deliver world-class interconnect solutions.
Responsibilities
Must Haves
Nice to Haves
What We Offer
US Conec will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.
US Conec will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.
Join US Conec today and be part of a team that values each other, promotes innovation and growth, and strives to exceed customer expectations in everything we do.
US Conec is proud to be an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, national origin, age, disability, protected veteran status, or any other legally protected characteristics
Ready to apply?
Apply to US Conec, Ltd.Share this job
US Conec, Ltd.
Engineering Innovation. Precision Plastics. Powering AI.
US Conec, Ltd. is a trusted, global company that prides itself on engineering excellence—creating innovative connectivity solutions that support today’s most important technologies. We foster a friendly, inclusive culture that values teamwork, creativity, and mutual respect. At US Conec, you’ll find real opportunities to grow and make a meaningful impact in a company that genuinely cares about its people and its customers. With competitive compensation, excellent benefits, and a supportive environment, this is a place where you can build your future—whether your interests lie in manufacturing, engineering, operations, or beyond.
Injection Molding Process Engineer
Overview
US Conec is seeking a skilled Injection Molding Process Engineer to join our Fort Worth team. In this role, you’ll lead and optimize injection molding operations, develop and maintain support infrastructure, and drive continuous improvement across manufacturing processes. You’ll serve as the technical expert for molding systems and equipment, ensuring safe, efficient, and high-quality production.
This position is ideal for candidates with strong mechanical engineering backgrounds and hands-on experience in injection molding environments who thrive in fast-paced, precision-driven settings.
Responsibilities
Must Haves
What We Offer
US Conec will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.
US Conec will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.
Join US Conec today and be part of a team that values each other, promotes innovation and growth, and strives to exceed customer expectations in everything we do.
US Conec is proud to be an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, national origin, age, disability, protected veteran status, or any other legally protected characteristics
Ready to apply?
Apply to US Conec, Ltd.Share this job
Manager, Rapid Prototyping
About Otto Aerospace
OTTO is developing the world’s first fifth-generation business jet, designed for sustainability through the innovative use of advanced super-laminar aerodynamics and high-precision, net-shaped composites. Flight tests of our technology demonstrator validate a dramatic reduction in fuel burn and allow for a sizeable improvement in cabin comfort. Otto Aerospace is designing world-class aircraft from first principles of physics and delivering ground-breaking aircraft and economic performance.
About the Role
Otto Aerospace is seeking a dynamic engineer to join our Aircraft Integration Team. The ideal candidate will have a background in aerospace rapid prototyping, including managing small, dynamic teams, hands-on design, build, and assembly of mockups, prototypes, and test articles, utilizing 3D-printed, wooden, metallic, fiberglass, and carbon-fiber construction. You will be joining a team developing the world’s most efficient aircraft. Otto Aerospace is seeking first-principles engineers who work well in a team atmosphere and know how to get things done.
What You’ll Do
Who You Are
Education
Experience
Desired Experience
Interpersonal Skills
Where You’ll Be
**This position will work onsite at our temporary headquarters in Ft Worth, TX then move to onsite at our new location in Jacksonville, FL upon facility readiness
Benefits
Otto Aerospace provides a robust benefits package that includes competitive salaries, subsidized medical, dental, and vision coverage, 401(k) opportunities, paid short term disability, voluntary long-term disability and additional term life, with 15 paid days off, 13 paid company holidays, and paid sick leave. Depending on seniority and role, some roles qualify for potential bonuses and stock options.
Otto Aerospace is an Equal Opportunity Employer
We are committed to diversity, equity, and inclusion in every aspect of our hiring process. All applicants will be considered for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability. We believe that a diverse team brings fresh perspectives, innovative ideas, and greater success. The more inclusive we are, the stronger we become. Applicants must be legally authorized to work in the U.S.
#LI-Onsite
Ready to apply?
Apply to Otto Aerospace
Share this job
At Zone 5 Technologies, we're redefining what's possible in unmanned aircraft systems. Our team of engineers and innovators is developing cutting-edge autonomous solutions that push the boundaries of UAS technology - solving complex challenges that matter.
We're building the future of UAS capabilities, and we're looking for exceptional talent to join us. If you're driven by hard problems, energized by rapid innovation, and ready to make an impact on next-generation flight systems, you belong here.
The Electrical Engineer V/VI is a senior-level role focused on leading the development and optimization of complex electrical systems for UAS platforms. This position includes driving innovation in circuit design, leading cross-disciplinary projects, and mentoring junior engineers to ensure the delivery of high-quality systems.
Responsibilities:
Leadership in Electrical Design: Lead the design, development, and testing of advanced electrical systems for UAS platforms.
Project Management: Oversee small-to-large-scale electrical engineering projects, ensuring on-time and high-quality deliverables.
Advanced Circuit Development: Develop and debug complex microcontroller systems, circuits, and power supply designs.
Wire Harness Production: Oversee and optimize wire harness production and documentation, utilizing Altium.
System Integration: Collaborate with mechanical and software engineers to ensure seamless integration of electrical systems.
Troubleshooting Expertise: Diagnose and resolve advanced circuit issues and provide guidance to junior engineers.
Flight Test Support: Lead electrical system integration and testing for UAS flight tests.
Mentorship: Train and mentor junior engineers, fostering a collaborative and innovative engineering environment.
Compliance and Documentation: Ensure all designs meet industry standards and maintain detailed technical documentation.
Qualifications:
Education: Bachelor’s or Master’s degree in Electrical Engineering or a related field.
Experience: 10+ years of experience in electrical engineering, with at least 5 years in UAS or aerospace systems.
Skills:
Expertise in Altium and circuit design tools.
Advanced knowledge of analog and digital circuits, power systems, and CAN bus communication.
Proven ability to address and close non-conformance issues.
Strong leadership and project management skills.
Excellent communication and cross-functional collaboration abilities.
Preferred Qualifications:
Experience in production environments and avionics systems.
Proven track record of leading successful UAS-related electrical projects.
Knowledge of advanced electrical testing procedures and tools.
Pay Ranges by Level -
Level V - $171,000 - $199,000
Level VI - $199,000 - $230,000
#LI-CR1
What's in it for you:
Benefits:
Why Join Zone 5 Technologies?
If you are passionate about unmanned aircraft technology and want to be a part of a dynamic and growing company, we would love to hear from you. Apply today and join the Zone 5 Technologies team!
In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire.
Zone 5 Technologies is a federal contractor and participates in E-Verify to confirm employment eligibility. As required by law, we will verify the identity and employment authorization of all new employees using the E-Verify system. Learn more about your rights and responsibilities under E-Verify: https://www.e-verify.gov.
Ready to apply?
Apply to Zone 5 Technologies
Share this job
At Zone 5 Technologies, we're redefining what's possible in unmanned aircraft systems. Our team of engineers and innovators is developing cutting-edge autonomous solutions that push the boundaries of UAS technology - solving complex challenges that matter.
We're building the future of UAS capabilities, and we're looking for exceptional talent to join us. If you're driven by hard problems, energized by rapid innovation, and ready to make an impact on next-generation flight systems, you belong here.
We are seeking a highly motivated Electrical Engineer III/IV to join our team. As an unmanned aerial systems (UAS) company, we are looking for an individual with experience overseeing small projects and wire harness production work, The ideal candidate should have experience producing, diagnosing and troubleshooting wire harnesses circuits in UAS platforms and should be familiar with Altium for documenting wire harness designs.
Responsibilities:
Qualifications:
Expected outcomes:
Pay Range by level:
Level III - $120,000 - $141,000
Level IV - $141,000 - $171,000
#LI-CR1
What's in it for you:
Benefits:
Why Join Zone 5 Technologies?
If you are passionate about unmanned aircraft technology and want to be a part of a dynamic and growing company, we would love to hear from you. Apply today and join the Zone 5 Technologies team!
In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire.
Zone 5 Technologies is a federal contractor and participates in E-Verify to confirm employment eligibility. As required by law, we will verify the identity and employment authorization of all new employees using the E-Verify system. Learn more about your rights and responsibilities under E-Verify: https://www.e-verify.gov.
Ready to apply?
Apply to Zone 5 Technologies
Share this job
At Zone 5 Technologies, we're redefining what's possible in unmanned aircraft systems. Our team of engineers and innovators is developing cutting-edge autonomous solutions that push the boundaries of UAS technology - solving complex challenges that matter.
We're building the future of UAS capabilities, and we're looking for exceptional talent to join us. If you're driven by hard problems, energized by rapid innovation, and ready to make an impact on next-generation flight systems, you belong here.
The GNC Engineer V/VI is a senior-level individual contributor role responsible for leading the design, development, and optimization of advanced guidance, navigation, and control systems for UAS. This position involves driving innovation in flight controls software, mentoring junior engineers, and collaborating across disciplines to deliver cutting-edge UAS technologies. Engineers in this role will contribute to strategic initiatives, ensure high performance in flight control systems, and lead efforts from concept to flight testing.
Responsibilities:
Technical Leadership: Lead the design, analysis, and development of flight controls software for Group 1 to 4 UAS.
Software Development: Architect and implement advanced software components for deployment to flight tests.
Simulation Expertise: Oversee the creation and execution of high-fidelity SWIL and HWIL simulations to validate system performance.
Advanced Modeling: Develop and refine complex models in Matlab/Simulink, ensuring accuracy and performance optimization.
Controls Analysis: Perform advanced stability and performance analyses, providing guidance on control system optimization.
Mentorship: Mentor and train junior engineers, fostering technical growth and team collaboration.
Cross-Functional Collaboration: Drive effective communication and alignment across engineering disciplines to meet project objectives.
Innovation and R&D: Lead research initiatives in advanced flight control methodologies, embedded systems, and auto-code generation.
Documentation and Review: Produce comprehensive technical documentation and lead peer review processes to ensure quality and compliance.
Qualifications:
Education: Master’s degree in Aerospace Engineering, Mechanical Engineering, or a related field.
Experience: 10+ years of experience in flight controls engineering, with at least 5 years in UAS applications.
Skills:
Expertise in Matlab/Simulink and auto-code generation for embedded systems.
Advanced knowledge of control theory, flight dynamics, and embedded systems.
Proven ability to run and analyze SWIL and HWIL simulations.
Strong leadership and project management skills.
Effective communication and collaboration skills.
Familiarity with Group 1-4 UAS flight controls and avionics suites.
Preferred Qualifications:
Experience leading multi-disciplinary engineering teams.
Knowledge of advanced control techniques and optimization algorithms.
History of contributing to successful flight test programs and R&D projects.
Pay Range by level -
Level V - $188,000 - $216,000
Level VI - $216,000 - $250,000
#LI-AW1
What's in it for you:
Benefits:
Why Join Zone 5 Technologies?
If you are passionate about unmanned aircraft technology and want to be a part of a dynamic and growing company, we would love to hear from you. Apply today and join the Zone 5 Technologies team!
In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire.
Zone 5 Technologies is a federal contractor and participates in E-Verify to confirm employment eligibility. As required by law, we will verify the identity and employment authorization of all new employees using the E-Verify system. Learn more about your rights and responsibilities under E-Verify: https://www.e-verify.gov.
Ready to apply?
Apply to Zone 5 Technologies
Share this job
DLR Group is an integrated design firm with a promise to elevate the human experience through design. This fuels the work we do around the world and inspires our mission to improve the lives of our clients, our communities, and our planet. If this sparks your interest, you’re in the right place.
DLR Group has an opening for a Commissioning Authority to join our growing team.
Our Smart Buildings team has an opening for a Commissioning Authority to join our growing team in the following cities:
About the Smart Buildings team at DLR Group
DLR Group’s approach is unique because we start every project with a focus on building performance outcomes and use this as a guide to inform our integrated design process. The Commissioning process is central to our approach, ensuring quality and consistency throughout design and construction.
Our certified Commissioning Authorities, Energy Management experts and Professional Engineers combine design phase expertise with hands-on functional testing and advanced operational performance analytics. This ensures projects are delivered at peak performance on Day One of operations, and are equipped for long-term efficiency and success.
We focus the Commissioning process to be the formal framework for delivering low-carbon, high-performance designs that elevate the human experience and deliver real value for building owners by prioritizing operational efficiency, occupant health and resilience.
Position Summary
In this position, you will be supporting commissioning activities for multiple high-profile, national and international Commissioning projects across DLR Group’s core sectors including Workplace, Federal, Education, Hospitality, Healthcare, Justice & Civic, Mixed-Use and more. You will work with these integrated design teams of Architects, Engineers and specialty designers, providing commissioning expertise
As a Commissioning Authority, you will frequently travel to job sites to perform construction reviews, functional testing, and building performance diagnostics. Expect to be traveling approximately 30–50% of your time in a typical month. In this role there is potential for rapid growth opportunities as we expand our Smart Buildings team.
The successful candidate will:
Required Qualifications:
Preferred Qualifications
Our comprehensive Benefits at DLR Group include medical, dental, vision, disability, wellness programs, flex spending, paid holidays, and paid time off. We also offer a 401(k) plan, employee stock ownership, and bonus opportunities. Compensation considerations are based on location, experience, and skills. The suggested pay range for this position is:
DLR Group is an integrated design firm delivering architecture, engineering, interiors, planning, and building optimization for new builds, renovations, and adaptive reuse projects.
We are 100% employee-owned: every employee is literally invested in our clients’ success. At the core of our firm are interdisciplinary teams engaged in every step of project lifecycles. Our teams champion true collaboration, open information sharing, shared risk and reward, value-based decision making, and proficient use of technology to deliver exceptional design. We are pursuing the goals of the 2030 Challenge, the ME2040, and the SE2050, and are an initial signatory of the China Accord and the AIA 2030 Commitment.
Through our values – commitment, creativity, environmental stewardship, fun, integrity, ownership, sharing, teamwork – we elevate the human experience through design, together.
DLR Group follows a four-day in-office work model, with employees having the flexibility to work somewhere other than the office on Fridays.
We are proud to be an Equal Opportunity/Affirmative Action/M/F/Veteran/Disabled employer.
Ready to apply?
Apply to DLR GroupShare this job
DLR Group is an integrated design firm with a promise to elevate the human experience through design. This fuels the work we do around the world and inspires our mission to improve the lives of our clients, our communities, and our planet. If this sparks your interest, you’re in the right place.
Our Smart Buildings team has an opening for a Senior Commissioning Authority to join our growing team in the following cities:
About the Smart Buildings team at DLR Group
DLR Group’s approach is unique because we start every project with a focus on building performance outcomes and use this as a guide to inform our integrated design process. The Commissioning process is central to our approach, ensuring quality and consistency throughout design and construction.
Our certified Commissioning Authorities, Energy Management experts and Professional Engineers combine design phase expertise with hands-on functional testing and advanced operational performance analytics. This ensures projects are delivered at peak performance on Day One of operations, and are equipped for long-term efficiency and success.
We focus the Commissioning process to be the formal framework for delivering low-carbon, high-performance designs that elevate the human experience and deliver real value for building owners by prioritizing operational efficiency, occupant health and resilience.
Position Summary
In this position, you will be the Project Manager for multiple high-profile, national and international Commissioning projects across DLR Group’s core sectors including Workplace, Federal, Education, Hospitality, Healthcare, Justice & Civic, Mixed-Use and more. You will manage a commissioning team and work with these integrated design teams of Architects, Engineers and specialty designers, providing commissioning expertise
As a Senior Commissioning Authority, you will manage multiple projects at a time, perform thorough design and construction reviews, conduct commissioning meetings, and oversee functional testing. Expect to be traveling approximately 10–30% of your time in a typical month. In this role there is potential for rapid growth opportunities as we expand our Smart Buildings team.
The successful candidate will:
Required Qualifications:
Preferred Qualifications
Our comprehensive Benefits at DLR Group include medical, dental, vision, disability, wellness programs, flex spending, paid holidays, and paid time off. We also offer a 401(k) plan, employee stock ownership, and bonus opportunities. Compensation considerations are based on location, experience, and skills. The suggested pay range for this position is:
DLR Group is an integrated design firm delivering architecture, engineering, interiors, planning, and building optimization for new builds, renovations, and adaptive reuse projects.
We are 100% employee-owned: every employee is literally invested in our clients’ success. At the core of our firm are interdisciplinary teams engaged in every step of project lifecycles. Our teams champion true collaboration, open information sharing, shared risk and reward, value-based decision making, and proficient use of technology to deliver exceptional design. We are pursuing the goals of the 2030 Challenge, the ME2040, and the SE2050, and are an initial signatory of the China Accord and the AIA 2030 Commitment.
Through our values – commitment, creativity, environmental stewardship, fun, integrity, ownership, sharing, teamwork – we elevate the human experience through design, together.
DLR Group follows a four-day in-office work model, with employees having the flexibility to work somewhere other than the office on Fridays.
We are proud to be an Equal Opportunity/Affirmative Action/M/F/Veteran/Disabled employer.
Ready to apply?
Apply to DLR GroupShare this job
About ShipMonk
ShipMonk isn't just a 3PL; we're a growth partner for merchants. We provide cutting-edge technology and a network of owned and operated fulfillment centers that empower high-growth ecommerce and DTC brands to stress less and grow more. With over 2,500 employees across five countries, we're on a mission to revolutionize fulfillment by providing everything from the fastest click-to-delivery and real-time inventory to custom solutions—all with a merchant-first mindset.
Why ShipMonk?
We believe in building for the long term, and our success is powered by five key differentiators that help us become true partners to our merchants.
● Global Fulfillment Network: Our 12+ owned and operated fulfillment centers span the US, Canada, Mexico, the U.K., and Mainland Europe. We never outsource, ensuring quality and consistency.
● Proprietary Technology: We've eliminated the need for tribal knowledge with our AI-powered platform. It provides a real-time, unified view of inventory and orders, giving our merchants the control and visibility they need to succeed.
● Unrivaled Support: We provide hands-on, "mom and pop" support with a global reach. Our dedicated teams are on-site at every fulfillment center, ready to jump into action.
● Transparent Pricing: We believe in honest, long-term partnerships. Our all- inclusive pricing means predictable costs, with no hidden fees or surprises.
● Committed to the Future: We invest over $10 million annually in research and development to ensure our technology and services continually evolve, helping merchants plant roots with a partner who is here to stay.
As the Industrial Engineer - Warehouse Design & Automation, you will be a technical leader responsible for designing, engineering, and scaling warehouse facilities across a multi-site fulfillment network. Your primary mission is to translate business demand and growth forecasts into data-driven, buildable warehouse designs that optimize throughput, labor efficiency, space utilization, and cost.
This role partners closely with Operations, Real Estate, Facilities, IT, Finance, and external automation vendors to deliver standardized, scalable solutions for greenfield builds, expansions, and retrofits. You will bring a strong systems mindset, deep understanding of material flow, and a bias for simplicity, operability, and long-term sustainability.
ShipMonk is an equal opportunity employer. We value diversity and do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.
Ready to apply?
Apply to ShipMonkShare this job
About Otto Aerospace
Otto is developing the world’s first fifth-generation business jet, designed for sustainability through the innovative use of advanced super-laminar aerodynamics and high-precision, net-shaped composites. Flight tests of our technology demonstrator validate a dramatic reduction in fuel burn and allow for a sizeable improvement in cabin comfort. Otto Aerospace is designing world-class aircraft from first principles of physics and delivering ground-breaking aircraft and economic performance.
About the Role
Otto Aerospace is seeking a dynamic engineer to join our Aircraft Integration Team. The ideal candidate will have a background in aerospace rapid prototyping including hands on design, build, and assembly of mockups and prototypes utilizing 3D printed, wooden, metallic, fiberglass, and carbon fiber construction. You will be joining a team developing the world’s most efficient aircraft. Otto Aerospace is seeking first principles engineers that work great in a team atmosphere and know how to get things done.
What You'll Do
Who You Are
Education
Experience
Desired Additional Skills and Experience
Where You'll Be
**This role will start onsite at our temporary facility at Meacham Airport in Ft Worth, TX until mid/late 2026 or when our new headquarters is ready to occupy in Jacksonville, FL, at which time it will transition there.
Benefits
Otto Aerospace provides a robust benefits package that includes competitive salaries, subsidized medical, dental, and vision coverage, 401(k) opportunities, paid short term disability, voluntary long-term disability and additional term life, with 15 paid days off, 13 paid company holidays, and paid sick leave. Depending on seniority and role, some roles qualify for potential bonuses and stock options.
Otto Aerospace is an Equal Opportunity Employer
We are committed to diversity, equity, and inclusion in every aspect of our hiring process. All applicants will be considered for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability. We believe that a diverse team brings fresh perspectives, innovative ideas, and greater success. The more inclusive we are, the stronger we become. Applicants must be legally authorized to work in the U.S.
#LI-Onsite
Ready to apply?
Apply to Otto Aerospace
Share this job
About Otto Aerospace
OTTO is developing the world’s first fifth-generation business jet, designed for sustainability through the innovative use of advanced super-laminar aerodynamics and high-precision, net-shaped composites. Flight tests of our technology demonstrator validate a dramatic reduction in fuel burn and allow a sizeable improvement in cabin comfort. Otto Aerospace is designing world-class aircraft from first principles physics and delivering ground-breaking aircraft and economic performance.
About the Role
Otto Aerospace is seeking an Associate Manufacturing Engineer to support the aft fuselage assembly Flight Test Vehicle (FTV) builds of the Phantom 3500. The Associate Manufacturing Engineer will also help the team prepare for low-rate initial production (LRIP) and full rate production (FRP) at the Final Assembly Integration and Test (FAIT) Facility, in Jacksonville, Florida.
The Associate Manufacturing Engineer role will contribute to the successful completion of major projects that support strategic priorities and technical objectives for the Phantom 3500 aft fuselage assembly. Working under general direction, the individual possesses basic knowledge in manufacturing engineering and assembly technical areas and can learn to develop imaginative manufacturing processes or tooling designs. The individual will support Manufacturing Engineering technical POCs on projects, programs and/or cross functional teams.
What You'll Do
Who You Are
Education
Experience
Required Skills
Where You'll Be
This role is hybrid on-site at our facility at Meacham Airport in Ft Worth, TX until mid/late 2026, at which time it will transition to full onsite in Jacksonville, FL.
Benefits
Otto Aerospace provides a robust benefits package that includes competitive salaries, subsidized medical, dental, and vision coverage, 401(k) opportunities, paid short term disability, voluntary long-term disability and additional term life, with 15 paid days off, 13 paid company holidays, and paid sick leave. Depending on seniority and role, some roles qualify for potential bonuses and stock options.
Otto Aerospace is an Equal Opportunity Employer
We are committed to diversity, equity, and inclusion in every aspect of our hiring process. All applicants will be considered for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability. We believe that a diverse team brings fresh perspectives, innovative ideas, and greater success. The more inclusive we are, the stronger we become. Applicants must be legally authorized to work in the U.S.
#LI-Hybrid
Ready to apply?
Apply to Otto Aerospace
Share this job
About Otto Aerospace
Otto is developing the world’s first fifth-generation business jet, designed for sustainability through the innovative use of advanced super-laminar aerodynamics and high-precision, net-shaped composites. Flight tests of our technology demonstrator validate a dramatic reduction in fuel burn and allow for a sizeable improvement in cabin comfort. Otto Aerospace is designing world-class aircraft from first principles of physics and delivering ground-breaking aircraft and economic performance.
About the Role
Otto Aerospace is seeking a dynamic engineer to join our Aircraft Integration Team. The ideal candidate will have a background in aerospace rapid prototyping including hands-on design, build, and assembly of mockups and prototypes utilizing 3D printed, wooden, metallic, fiberglass, and carbon fiber construction. You will be joining a team developing the world’s most efficient aircraft. Otto Aerospace is seeking first principles engineers that work great in a team atmosphere and know how to get things done.
What You'll Do
Who You Are
Education
B.S. in Mechanical or Aerospace Engineering, or equivalent.
Experience
Desired Additional Skills and Experience
Where You'll Be
**This role will start onsite at our temporary facility at Meacham Airport in Ft Worth, TX until mid/late 2026 or when our new headquarters is ready to occupy in Jacksonville, FL, at which time it will transition there.
Benefits
Otto Aerospace provides a robust benefits package that includes competitive salaries, subsidized medical, dental, and vision coverage, 401(k) opportunities, paid short-term disability, voluntary long-term disability and additional term life, with 15 paid days off, 13 paid company holidays, and paid sick leave. Depending on seniority and role, some roles qualify for potential bonuses and stock options.
Otto Aerospace is an Equal Opportunity Employer
We are committed to diversity, equity, and inclusion in every aspect of our hiring process. All applicants will be considered for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability. We believe that a diverse team brings fresh perspectives, innovative ideas, and greater success. The more inclusive we are, the stronger we become. Applicants must be legally authorized to work in the U.S.
#LI-Onsite
Ready to apply?
Apply to Otto Aerospace
Share this job
About Otto Aerospace
OTTO is developing the world’s first fifth-generation business jet, designed for sustainability through the innovative use of advanced super-laminar aerodynamics and high-precision, net-shaped composites. Flight tests of our technology demonstrator validate a dramatic reduction in fuel burn and allow a sizeable improvement in cabin comfort. Otto Aerospace is designing world-class aircraft from first principles physics and delivering ground-breaking aircraft and economic performance.
About the Role
Otto Aerospace is seeking an Engineer, Metallic Materials and Processes to be a member of our team. The ideal candidate has an interest in materials and processes and a willingness to learn. Otto Aerospace is seeking engineers, who are comfortable working from first principles, work great in a team atmosphere and get things done.
The successful candidate will join the Materials and Processes department. This department advises on material selection and associated best practices, properties and allowables. They also author governing documents, test documents, and specifications related to materials and processes to be consumed in the design, fabrication, assembly, inspection and repair of Otto aircraft. Additionally, the department interfaces with manufacturing suppliers, ensuring all efforts related to materials and processes conform to Otto prescribed requirements.
What You'll Do
Who You Are
Education
Experience
Required Skills
Where You'll Be
**This role is on-site at our facility at Meacham Airport in Ft Worth, TX and will transition to the permanent headquarters in Jacksonville, Florida upon facility readiness.
Benefits
Otto Aerospace provides a robust benefits package that includes competitive salaries, subsidized medical, dental, and vision coverage, 401(k) opportunities, paid short-term disability, voluntary long-term disability and additional term life, with 15 paid days off, 13 paid company holidays, and paid sick leave. Depending on seniority and role, some roles qualify for potential bonuses and stock options.
Otto Aerospace is an Equal Opportunity Employer
We are committed to diversity, equity, and inclusion in every aspect of our hiring process. All applicants will be considered for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability. We believe that a diverse team brings fresh perspectives, innovative ideas, and greater success. The more inclusive we are, the stronger we become. Applicants must be legally authorized to work in the U.S.
#LI-Onsite
Ready to apply?
Apply to Otto Aerospace
Share this job
About Otto Aviation
OTTO is developing the world’s first fifth-generation business jet, designed for sustainability through the innovative use of advanced super-laminar aerodynamics and high-precision, net-shaped composites. Flight tests of our technology demonstrator validate a dramatic reduction in fuel burn and allow a sizeable improvement in cabin comfort. Otto Aviation is designing world-class aircraft from first principles physics and delivering ground-breaking aircraft and economic performance.
Role Overview
Otto Aviation is seeking an Engineer, Airframe Stress Analysis to be a member of our team. The ideal candidate has relevant stress analysis experience and a willingness to learn. You will join a team developing the world’s most efficient aircraft. Otto Aviation is seeking engineers, who are comfortable working from first principles, work great in a team atmosphere and get things done.
Responsibilities
Qualifications/Requirements
Interpersonal Skills
Where You'll Be
**This is an onsite position. You will be hybrid/onsite at our temporary headquarters in Ft Worth TX, then relocate to our new location in Jacksonville, FL upon facility readiness.
Benefits
Otto Aerospace provides a robust benefits package that includes competitive salaries, subsidized medical, dental, and vision coverage, 401(k) opportunities, paid short term disability, voluntary long-term disability and additional term life, with 15 paid days off, 13-14 paid holidays, and paid sick leave. Depending on seniority and role, some roles qualify for potential bonuses and stock options.
Otto Aerospace is an Equal Opportunity Employer
We are committed to diversity, equity, and inclusion in every aspect of our hiring process. All applicants will be considered for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability. We believe that a diverse team brings fresh perspectives, innovative ideas, and greater success. The more inclusive we are, the stronger we become. Applicants must be legally authorized to work in the U.S.
#LI-Hybrid
Ready to apply?
Apply to Otto Aerospace
Share this job
About Otto Aerospace
OTTO is developing the world’s first fifth-generation business jet, designed for sustainability through the innovative use of advanced super-laminar aerodynamics and high-precision, net-shaped composites. Flight tests of our technology demonstrator validate a dramatic reduction in fuel burn and allow a sizeable improvement in cabin comfort. Otto Aerospace is designing world-class aircraft from first principles physics and delivering ground-breaking aircraft and economic performance.
About the Role
Otto Aerospace is seeking an Associate Manufacturing Engineer to support the fuselage cockpit assembly Flight Test Vehicle (FTV) builds of the Phantom 3500. The Associate Manufacturing Engineer will also help the team prepare for low-rate initial production (LRIP) and full rate production (FRP) at the Final Assembly Integration and Test (FAIT) Facility, in Jacksonville, Florida.
The Associate Manufacturing Engineer role will contribute to the successful completion of major projects that support strategic priorities and technical objectives for the Phantom 3500 fuselage cockpit assembly. Working under general direction, the individual possesses basic knowledge in manufacturing engineering and assembly technical areas and can learn to develop imaginative manufacturing processes or tooling designs. The individual will support Manufacturing Engineering technical POCs on projects, programs and/or cross functional teams.
What You'll Do
Who You Are
Education
Experience
Required Skills
Where You'll Be
This role is hybrid on-site at our facility at Meacham Airport in Ft Worth, TX until mid/late 2026, at which time it will transition to full onsite in Jacksonville, FL.
Benefits
Otto Aerospace provides a robust benefits package that includes competitive salaries, subsidized medical, dental, and vision coverage, 401(k) opportunities, paid short term disability, voluntary long-term disability and additional term life, with 15 paid days off, 13 paid company holidays, and paid sick leave. Depending on seniority and role, some roles qualify for potential bonuses and stock options.
Otto Aerospace is an Equal Opportunity Employer
We are committed to diversity, equity, and inclusion in every aspect of our hiring process. All applicants will be considered for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability. We believe that a diverse team brings fresh perspectives, innovative ideas, and greater success. The more inclusive we are, the stronger we become. Applicants must be legally authorized to work in the U.S.
#LI-Onsite
Ready to apply?
Apply to Otto Aerospace
Share this job
About Otto Aerospace
OTTO is developing the world’s first fifth-generation business jet, designed for sustainability through the innovative use of advanced super-laminar aerodynamics and high-precision, net-shaped composites. Flight tests of our technology demonstrator validate a dramatic reduction in fuel burn and allow a sizeable improvement in cabin comfort. Otto Aerospace is designing world-class aircraft from first principles physics and delivering ground-breaking aircraft and economic performance.
About the Role
Otto Aerospace is seeking an Associate Manufacturing Engineer to support the Empennage assembly Flight Test Vehicle (FTV) builds of the Phantom 3500. The Associate Manufacturing Engineer will also help the team prepare for low-rate initial production (LRIP) and full rate production (FRP) at the Final Assembly Integration and Test (FAIT) Facility, in Jacksonville, Florida.
The Associate Manufacturing Engineer role will contribute to the successful completion of major projects that support strategic priorities and technical objectives for the Phantom 3500 Empennage assembly. Working under general direction, the individual possesses basic knowledge in manufacturing engineering and assembly technical areas and can learn to develop imaginative manufacturing processes or tooling designs. The individual will support Manufacturing Engineering technical POCs on projects, programs and/or cross functional teams.
What You'll Do
Who You Are
Education
Experience
Required Skills
Where You'll Be
This role is hybrid on-site at our facility at Meacham Airport in Ft Worth, TX until mid/late 2026, at which time it will transition to full onsite in Jacksonville, FL.
Benefits
Otto Aerospace provides a robust benefits package that includes competitive salaries, subsidized medical, dental, and vision coverage, 401(k) opportunities, paid short term disability, voluntary long-term disability and additional term life, with 15 paid days off, 13 paid company holidays, and paid sick leave. Depending on seniority and role, some roles qualify for potential bonuses and stock options.
Otto Aerospace is an Equal Opportunity Employer
We are committed to diversity, equity, and inclusion in every aspect of our hiring process. All applicants will be considered for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability. We believe that a diverse team brings fresh perspectives, innovative ideas, and greater success. The more inclusive we are, the stronger we become. Applicants must be legally authorized to work in the U.S.
#LI-Onsite
Ready to apply?
Apply to Otto Aerospace
JobsRadar was built for real people having a rough time in their job search — not for automated requests. You're clicking way too fast and you're now temporarily blocked.
Come back later. If you're genuinely job hunting, we've got your back — just act like a human.
Cookies & analytics
This site uses cookies from third-party services to deliver its features and to analyze traffic.