Job Title: Technical Services Manager
Location: Canada
Travel expectations: 80% travel

Your Impact
As a Technical Services Manager, you will be a vital team member responsible for leading the deployment of network, hardware, and software solutions for Axon's Fleet systems. This post-sale, customer-facing, front-line role requires efficiency in deployment, management of third-party installations, and ensuring an exceptional customer experience and continued support.

What You’ll Do

• Lead and coordinate Fleet installations, ensuring efficiency and a positive customer experience.
• Keep 3rd party installers and Axon customers updated on installation status through daily reports and stand-up meetings.
• Ensure regular and reliable attendance, demonstrating commitment to work responsibilities.
• Deploy hardware and software solutions in a dynamic environment with minimal assistance.
• Exhibit flexibility to undertake additional projects and adapt to evolving priorities.
• Provide guidance to customers on optimal hardware placement, tailoring solutions to enhance workflows and ensure compliant data collection.
• Develop accurate installation diagrams and thorough documentation for implemented solutions.
• Provide administrative support for vendor setup, clearances, tracking, and maintenance of work orders
• Engage with key technology decision-makers post-sale.
• Conduct training sessions for both technical and non-technical staff on the use of Axon Fleet and Interview solutions.
• Train customer technical and non-technical staff and 12V low-voltage sub-contractors on proper installation and use of Axon hardware and software components.

What You’ll Bring

Technical Acumen:

• Experience programming IP-based Ethernet networks and devices, including layer 2, LAN, WAN, and VPN configurations.
• Comprehensive understanding of 12-volt electronics, basic wiring diagrams, DC circuit theory, mechanical dexterity, and troubleshooting skills (Emergency Vehicle Technician or EVTCC certifications preferred).
• Proficiency with 12V power distribution, relays, fuses, and circuit breakers.
• Experience with vehicle lighting systems, including emergency lights and sirens.
• Knowledge of 12V battery systems, including battery isolators and auxiliary battery setups.
• Familiarity with vehicle communication systems, including CAN bus and LIN Bus.
• Ability to conduct diagnostics and repairs or replacement of faulty equipment, wiring, and electrical systems.
• Understanding of Cradlepoint, TCP/IP layers, local area networking, and physical layer infrastructure is an asset to have.
• Familiarity with data transfer concepts, WAN access types, local area networking, physical layer infrastructure, wireless technologies, access point networks, and virtual private networking.
• Ability to quickly understand and troubleshoot network connectivity issues.

Other Qualifications:

• Experience with law enforcement agencies is highly valued.
• Ability to work safely and skilfully with hand tools.
• Proven team leadership skills, supporting customers and third parties to achieve objectives.
• Previous experience in leading a team or contractors on multiple projects with successful outcomes.
• Exceptional communication skills, professionalism, and ability to work both within a team and independently.
• Strong critical thinking and problem-solving skills.
• Desire to work with a team or visit clients in person weekly. (Candidates must reside within reasonable proximity to a major airport.)
• French speaking is an asset but not required

At IEM, we’re not just building innovative electrical distribution systems, we’re shaping the future. IEM is dedicated to delivering world-class solutions for complex power needs. After 75 years, we continue to push the boundaries of what’s possible. Whether you’re an experienced professional or just starting out, you’ll have the opportunity to contribute, grow, and make a lasting impact on industries that power the world’s most dynamic markets.

IEM is currently seeking a Quality Systems Technician for our Surrey, B.C. locations and will report into the Quality Systems Leader. The Quality Systems Technician plays a key role in supporting the development, implementation, and maintenance of digital quality systems, smart tools, and quality infrastructure. Reporting to the Lead Quality Systems Engineer, this role focuses on setting up systems, troubleshooting technical issues, and enabling the smooth integration of quality processes within manufacturing operations. 

Please note: This position requires 100% in-office presence in our Surrey offices and does not offer remote work.

Key Responsibilities:

• Support the setup, configuration, and validation of quality systems, including smart tools, AI cameras, and digital inspection devices.
• Assist in troubleshooting issues related to EQMS platforms, smart inspection systems, and quality data capture tools.
• Work with engineering, IT, and quality teams to integrate new tools and systems into production processes.
• Help build and maintain process flows, control plans, and digital documentation related to quality system infrastructure.
• Support the digitization, automation, and standardization of quality and traceability records, including inspection data, testing logs, serialization records, and process verification checkpoints.
• Contribute to the creation and refinement of standard operating procedures (SOPs), work instructions, and user guides related to quality systems.
• Participate in pilot runs and process trials to validate functionality and integration of smart quality tools.
• Monitor system performance and escalate recurring issues or improvement opportunities.
• Maintain accurate documentation of setups, system changes, and configuration parameters.
• Provide technical support to shop floor users to ensure quality systems are functioning correctly.
• Assist in quality-related training sessions for new tools or systems implementation.
• Coordinate with vendors or suppliers when technical support or software updates are needed for system hardware or software.
• Perform other duties as needed to support the implementation and sustainability of quality system initiatives.
• Ability to develop & update programs and scripts for data validation, data sorting, automation, and creation of dashboards and visual reporting tools. 
• Familiarity with serialization, traceability systems, digital quality records, and manufacturing data management principles is strongly preferred.

Qualifications:

• Diploma or technical certification in Quality, Engineering Technology, Mechatronics, or a related technical field.
• 2+ years of experience in a manufacturing or engineering support role, preferably with exposure to quality or production systems.
• ⁠Experience with programming, scripting, or data visualization tools such as Python, SQL, VBA, or similar platforms is considered an asset.
• Familiarity with EQMS platforms, process automation, or smart inspection technologies is an asset.
• Strong troubleshooting and problem-solving skills in both hardware and software environments.
• Ability to read technical drawings, flowcharts, and system diagrams.
• Comfortable working in a cross-functional environment with engineering, IT, and operations teams.
• Proficient in Microsoft Office and experience with digital tools used in quality systems.
• Good communication skills and a detail-oriented mindset.
• Knowledge of lean manufacturing or six sigma principles is a plus.
• Demonstrated career ambition with a track record of growth and increasing responsibility; highly promotable with the potential to take on broader leadership roles within a fast-paced, high-growth organization 

Working Conditions:

• Split between office and shop floor environments.
• May require light hands-on work for system setup, testing, and troubleshooting.

Compensation actually offered for this role will take into account internal equity and also may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered. 

[Compensation Range: CAD $25.00 - $33.00/hr] 

Reports To:  Sr. Manufacturing Engineering Manager, Automation Integration

Position Summary:

IEM is currently seeking a Control Engineering Technician for our Surrey, BC and will report into the Senior Manufacturing Engineering Manager for the automation integration team. The Technician is responsible for installation, calibration, maintenance, and troubleshooting automated manufacturing systems to improve safety, quality, and productivity. This role supports automation projects from concept through installation, validation, and production launch while supporting ongoing manufacturing operations.

Key Responsibilities:

• Assist in the design, development, and implementation of automated manufacturing systems and equipment
• Support automation projects through installation, testing, validation, and production startup
• Support programming, troubleshooting, and optimization of PLCs, HMIs, robotics, and vision systems, including assisting with root cause analysis for downtime events
• Assist in the creation and maintenance of process documentation, including work instructions, PFMEAs, and control plans
• Work closely with production, maintenance, quality, and supply chain teams to support daily manufacturing operations
• Collect and analyze production data to help improve throughput, reduce scrap, and increase OEE
• Assist with capital equipment projects, including vendor coordination and basic project tracking
• Follow and support compliance with safety, quality, and regulatory standards
• Participate in continuous improvement initiatives using Lean and Six Sigma methodologies
• Perform additional duties as assigned to support the team and organization

Qualifications

• Technical degree or certification in electrical or mechanical engineering technology
• 1-5 years of experience in manufacturing automation
• Hands-on experience with PLCs, robotics, HMIs, and vision systems
• Strong troubleshooting, data analysis, and problem-solving skills
• Experience leading projects and working with external vendors
• Working knowledge of Lean Manufacturing and Six Sigma principles
• Demonstrated career ambition with a track record of growth and increasing responsibility; highly promotable with the potential to take on broader leadership roles within a fast-paced, high-growth organization

Compensation actually offered for this role will take into account internal equity and also may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.

Salary Range: $25-27.50CAD

About Clutch:

We’re on a mission to reinvent the way people buy, sell, and own cars. Are you game?

Clutch is Canada’s largest online used car retailer, delivering a seamless, hassle-free car buying and selling experience to drivers everywhere. Customers can browse hundreds of cars from the comfort of their home, get the right one delivered to their door, and enjoy peace of mind with our 10-Day Money-Back Guarantee… and that’s just the beginning.

Named two years in a row to the Globe & Mail’s list of the Top Growing Companies in Canada and awarded spots on Deloitte’s Technology Fast 50™ and Fast 500™ lists, we’re looking to add curious, hard-working, and driven individuals to our growing team.

Headquartered in Toronto, Clutch was founded in 2017 and currently services Ontario, New Brunswick, Nova Scotia, and Prince Edward Island. Clutch is backed by a number of world-class investors, including D1 Capital, Canaan, Real Ventures, BrandProject, and Upper90. To learn more, visit clutch.ca.

About the role:

Clutch is looking for a Licensed Automotive Service Technician to join our team! A $3,000 signing bonus will be paid after the 3-month probationary period. We’re looking for all-star licensed automotive mechanic talent to help ensure that all of our vehicles are up to our high mechanical standards. Working alongside our reconditioning team, you will perform vehicle inspections, maintenance work, and repairs across a range of systems.

What you’ll do:

• Perform Clutch standardized vehicle inspections (stationary and road tests)

• Diagnose and assess vehicle issues and damage

• Perform Ontario Provincial Safety Inspections

• Make recommendations about vehicle repairs and the best course of action

• Perform repairs and preventative maintenance such as oil changes, suspension and brake jobs

• Create and maintain documentation of repairs, inspections, and estimates

• Ensure vehicles meet Clutch’s mechanical and safety standards

• Communicate vehicle status, repair needs, and completion timelines

• Use diagnostic tools and shop systems (e.g., Google Drive, Slack)

• Contribute to continuous improvement of mechanical procedures

• Metrics/measurement of success include inspection thoroughness, repair quality, safety compliance, turnaround time, and documentation accuracy

What we’re looking for:

• 310s Red Seal or equivalent certification or training

• Experience working with a variety of car brands (domestic, import & European)

• Team player above all else

• Strong attention to detail

• Ability to multitask and prioritize competing demands

• Desire to learn new skills

• Comfortable using technology (Google Drive, Slack, etc.)

• Valid Driver’s License with a clean driver’s abstract

• Able to commit to a full-time schedule of 40 hours per week, including overtime based on business needs. 

Other items to note:

• Communication, problem resolution/analysis, customer service orientation

• Ability to work independently and with a team

• Working conditions in a shop environment

It’d be great if you have:

• Experience with advanced diagnostic tools

• Previous work in reconditioning, dealership, or high-volume inspection environments

Why you’ll love it at Clutch:

• Autonomy & ownership – opportunity to build your process and influence the company workforce at every level

• Help shape the future of car buying and selling in Canada by leading a critical part of our vehicle quality process

• Broad and direct ownership over mechanical standards and vehicle readiness during a phase of rapid growth

• Dedicated to attracting and retaining top talent with top-of-market compensation packages

• Above market health & dental benefits

Employment Type:

• Existing, Permanent Full-Time

Compensation & Benefits:

• Wage: $34.00 - $39.00

• Benefits: Comprehensive benefits plans include healthcare, dental care, vision care, prescriptions, life insurance, and dependent coverage; start from day 1. (Applicable for Permanent Full-Time)

• Pay decisions reflect objective criteria: skills, performance, market benchmarking, responsibilities, and working conditions

Clutch is committed to fostering an inclusive workplace where all individuals have an opportunity to succeed. If you require accommodation at any stage of the interview process, please email talent@clutch.ca

About the role

Every day, the world’s largest fleets depend on maintenance operations to keep their vehicles and equipment running. When a truck breaks down on the side of a highway or a piece of heavy equipment fails on a job site, the cost isn’t just a repair bill — it’s missed deliveries, idle crews, compliance risk, and eroded customer trust. Despite the stakes, most maintenance teams still run on spreadsheets, whiteboards, and legacy systems that haven’t changed in decades. Samsara is changing that.

The Connected Asset Maintenance team is building Samsara’s next major product line — a modern, intelligent maintenance and asset management platform purpose-built for physical operations. We’re a few quarters in, moving fast, and building from the ground up. Think of this as a startup inside Samsara: a small, focused team with the full backing of a scaled platform, massive distribution, and millions of connected assets already generating the data that makes our product uniquely powerful.

We’re looking for a Principal Product Manager who will own a significant portion of our Maintenance product. You’ll report directly to the VP of Product & Engineering for the Business Unit. One week you might be in a maintenance garage watching a fleet technician diagnose an engine fault, and the next you’ll be whiteboarding a new workflow with your engineering team or jumping on a call with Sales to close a strategic deal. You’ll spend serious time on-site with customers — not just interviewing them, but learning their world: how work orders flow, how parts get tracked, how a maintenance director decides what gets fixed today versus next week. That depth of understanding is what separates good products from great ones in this space.

This is a remote position open to candidates residing in Canada.

You should apply if

• You want to build something from scratch: You’re energized by the blank canvas of a new product, not intimidated by it. You love 0-to-1 and you know what it takes — the scrappiness, the speed, the willingness to do whatever the product needs.
• You’re deeply curious about how the physical world works: You believe the best product insights come from being where the work actually happens, and you’re energized — not drained — by time in the field.
• You’re already using AI to make yourself faster: You don’t just build AI products — you use AI tools daily in your own work (writing specs, analyzing customer data, prototyping ideas, accelerating research). You see this as table stakes, not a nice-to-have.
• You are the architect of your own career: If you put in the work, this role won’t be your last at Samsara. We set up our employees for success and have built a culture that encourages rapid career development, countless opportunities to experiment and master your craft in a hyper-growth environment.
• You want to be with the best: At Samsara, we win together, celebrate together and support each other. You will be surrounded by a high-caliber team that will encourage you to do your best.

In this role, you will

• Become a domain expert in maintenance operations. Build deep, lasting relationships with customers — maintenance directors, fleet managers, technicians — and translate what you learn into product conviction that the team can rally around.
• Own the vision, strategy, and roadmap for your product area within Connected Asset Maintenance. Define where we’re going, why, and in what order — balancing customer value, technical feasibility, and business impact. Communicate it clearly to the team, to leadership, and to customers.
• Drive the full product lifecycle from discovery and definition through design, build, launch, and iteration. Set success criteria and stage-gates. Ensure we ship on time and at the quality bar our enterprise customers expect.
• Partner with Engineering and Design to build a world-class product. Bring strong opinions on UX and workflow design. Make crisp tradeoff decisions. Use AI tools aggressively to accelerate research, spec writing, and prototyping — and raise the bar for the team.
• Work cross-functionally with Sales, Customer Success, and Marketing to win strategic deals, drive adoption post-sale, and build the GTM playbook for a new product line. You’re not above jumping on a sales call or writing enablement materials.
• Champion, role model, and embed Samsara’s cultural principles (Focus on Customer Success, Build for the Long Term, Adopt a Growth Mindset, Be Inclusive, Win as a Team) as we scale globally and across new offices.

Minimum requirements for the role

• 6+ years in a software product management role, with demonstrated experience building a new product or business from early stages.
• A track record of deep customer engagement — building real relationships with customers and turning those insights into products that win.
• Strong technical fluency — you can go deep with engineers on data models, APIs, and system architecture, and you establish credibility quickly.
• Active use of AI tools in your day-to-day product work. You should be able to point to specific ways AI makes you faster and better today.
• Proven ability to set product vision and roadmaps, and to ship products that deliver measurable business results on tight timelines.
• Excellent communication skills — comfortable presenting to enterprise customers, senior executives, and cross-functional teams. Equally strong writing clear strategy documents and concise product specs.
• Comfort navigating ambiguity and driving clarity. You don’t wait for someone to tell you what to do — you figure it out and move.

An ideal candidate also has

• History of working on successful B2B enterprise products and working directly with large customers ($100K+ ARR).
• Experience as a founder or at an early-stage startup where you wore multiple hats and owned outcomes end-to-end.
• Bachelor’s or Master’s degree in a technical field.

About Clutch:

We’re on a mission to reinvent the way people buy, sell, and own cars. Are you game?

Clutch is Canada’s largest online used car retailer, delivering a seamless, hassle-free car buying and selling experience to drivers everywhere. Customers can browse hundreds of cars from the comfort of their home, get the right one delivered to their door, and enjoy peace of mind with our 10-Day Money-Back Guarantee… and that’s just the beginning.

Named two years in a row to the Globe & Mail’s list of the Top Growing Companies in Canada and awarded spots on Deloitte’s Technology Fast 50™ and Fast 500™ lists, we’re looking to add curious, hard-working, and driven individuals to our growing team.

Headquartered in Toronto, Clutch was founded in 2017 and currently services Ontario, New Brunswick, Nova Scotia, and Prince Edward Island. Clutch is backed by a number of world-class investors, including D1 Capital, Canaan, Real Ventures, BrandProject, and Upper90. To learn more, visit clutch.ca.

About the role:

Clutch is looking for a Licensed Automotive Service Technician to join our team! A $3,000 signing bonus will be paid after the 3-month probationary period. We’re looking for all-star licensed automotive mechanic talent to help ensure that all of our vehicles are up to our high mechanical standards. Working alongside our reconditioning team, you will perform vehicle inspections, maintenance work, and repairs across a range of systems.

What you’ll do:

• Perform Clutch standardized vehicle inspections (stationary and road tests)

• Diagnose and assess vehicle issues and damage

• Conduct Nova Scotia Motor Vehicle Safety Inspections (MVI)

• Make recommendations about vehicle repairs and the best course of action

• Perform repairs and preventative maintenance such as oil changes, suspension and brake jobs

• Create and maintain documentation of repairs, inspections, and estimates

• Ensure vehicles meet Clutch’s mechanical and safety standards

• Communicate vehicle status, repair needs, and completion timelines

• Use diagnostic tools and shop systems (e.g., Google Drive, Slack)

• Contribute to continuous improvement of mechanical procedures

• Metrics/measurement of success include inspection thoroughness, repair quality, safety compliance, turnaround time, and documentation accuracy

What we’re looking for:

• Red Seal Endorsement (RSE) or equivalent certification or training

• Experience working with a variety of car brands (domestic, import & European)

• Team player above all else

• Strong attention to detail

• Ability to multitask and prioritize competing demands

• Desire to learn new skills

• Comfortable using technology (Google Drive, Slack, etc.)

• Valid Driver’s License with a clean driver’s abstract

• Able to commit to a full-time schedule of 40 hours per week, including overtime based on business needs. 

Other items to note:

• Communication, problem resolution/analysis, customer service orientation

• Ability to work independently and with a team

• Working conditions in a shop environment

It’d be great if you have:

• Experience with advanced diagnostic tools

• Previous work in reconditioning, dealership, or high-volume inspection environments

Why you’ll love it at Clutch:

• Autonomy & ownership – opportunity to build your process and influence the company workforce at every level

• Help shape the future of car buying and selling in Canada by leading a critical part of our vehicle quality process

• Broad and direct ownership over mechanical standards and vehicle readiness during a phase of rapid growth

• Dedicated to attracting and retaining top talent with top-of-market compensation packages

• Above market health & dental benefits

 Benefits:

• Benefits: Comprehensive benefits plans include healthcare, dental care, vision care, prescriptions, life insurance, and dependent coverage; start from day 1. (Applicable for Permanent Full-Time)

• Pay decisions reflect objective criteria: skills, performance, market benchmarking, responsibilities, and working conditions

Clutch is committed to fostering an inclusive workplace where all individuals have an opportunity to succeed. If you require accommodation at any stage of the interview process, please email talent@clutch.ca

Build the Path Forward

At Path Robotics, we’re building the future of embodied intelligence. Our AI-driven systems enable robots to adapt, learn, and perform in the real world closing the skilled labor gap and transforming industries. We go beyond traditional methods, combining perception, reasoning, and control to deliver field-ready AI that is risk-aware, reliable, and continuously improving through real-world use.

Big, hard problems are our everyday work, and our team of intelligent, humble, and driven people make the impossible possible together.

We are seeking a highly skilled and technically proficient Field Service Technician to join our dynamic team focused on revolutionizing manufacturing processes. As a key member of our technical workforce, you will be responsible for operating, maintaining, and troubleshooting advanced robotic welding systems and automation equipment. This role demands a strong understanding of engineering principles, hands-on experience with mechanical and electrical systems, and the ability to integrate cutting-edge technology into diverse manufacturing environments.

This is a remote role based in Canada. Employment will be facilitated through a locally compliant entity.

What You’ll Do

• Operate and maintain a state-of-the-art multi-robotic welding system, demonstrating proficiency in robotic kinematics and dynamics.
• Load, monitor, and inspect welded assemblies with precision utilizing robotic vision systems and sensors.
• Accurately manage inventory of parts and completed assemblies.
• Conduct preventive maintenance, troubleshooting, and repairs on automation equipment and cells, both locally and at customer sites.
• Record and analyze data to facilitate engineering-driven issue resolution.
• Monitor cell performance and ensure precise part fit-up.
• Operate specialized machines integrated into customer manufacturing processes.
• Integrate autonomous welding cells into customer manufacturing processes, demonstrating proficiency in robotic system integration and communication protocols.
• Service and maintain pneumatic systems, welding equipment, robotics, and electrical automation devices.
• Integrate autonomous welding cells into customer manufacturing processes.
• Gain expertise in Forge processes, including operating the cell through command prompts and code changes.
• Interface with customers to optimize equipment efficiency.
• Collaborate with engineering resources to troubleshoot issues promptly.
• Inspect, clean, and replace electrical and mechanical components.
• Demonstrate adaptability to evolving needs and rapid developments in the field.
• Willingness to travel extensively (75%+ of the time) to customer sites

Who You Are

• Technical training, Trade School certification, Associate degree in Engineering Tech, or equivalent industry experience.
• Hands-on experience in the design, assembly, and troubleshooting of mechanical and electrical systems, preferably in manufacturing equipment.
• Welding experience is desirable, but certifications are not mandatory.
• Fluent in English and Spanish is desirable, but not required
• Familiarity with fabrication or machine shop processes.
• Comfortable with learning and using programming languages.
• Detail-oriented with experience handling small and fragile components.
• Passionate about collaborative work in a dynamic environment.
• Eagerness to learn and grow in the field.

Why You'll Love It Here

• Daily free lunch to keep you fueled and connected with the team
• Flexible PTO so you can take the time you need, when you need it
• Comprehensive medical, dental, and vision coverage
• 6 weeks fully paid parental leave, plus an additional 6–8 weeks for birthing parents (12–14 weeks total)
• 401(k) retirement plan through Empower
• Generous employee referral bonuses—help us grow our team!

Who We Are

At Path Robotics we love coming to work to solve interesting and tough challenges but also because our ideas are welcomed and valued. We encourage unique thinking and are dedicated to creating a diverse and inclusive environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

If you require a reasonable accommodation to participate in the application process or any part of the hiring process, please contact HR@path-robotics.com. We are committed to providing equal access and will work with qualified individuals to ensure a fair and accessible hiring experience. We will respond to your request within 48 hours

About Clutch:

We’re on a mission to reinvent the way people buy, sell, and own cars. Are you game?

Clutch is Canada’s largest online used car retailer, delivering a seamless, hassle-free car-buying experience to drivers everywhere. Customers can browse hundreds of cars from the comfort of their home, get the right one delivered to their door, and enjoy peace of mind with our 10-Day Money-Back Guarantee… and that’s just the beginning.

Named two years in a row to the Globe & Mail’s list of the Top Growing Companies in Canada and also awarded spots on Deloitte’s Technology Fast 50™ and Fast 500™ lists, we’re looking to add curious, hard-working, and driven individuals to our growing team.

Headquartered in Toronto, Clutch was founded in 2017 and currently services Ontario, New Brunswick, Nova Scotia, British Columbia, and Prince Edward Island. Clutch is backed by a number of world-class investors, including D1 Capital, Canaan, Real Ventures, Brand Project, and Upper90. To learn more, visit clutch.ca.

About the role:

We’re looking for a hands-on Licensed Technician Team Lead to join our vehicle reconditioning facility on the evening shift (Monday–Thursday, 4:30 PM – 3:00 AM). This role combines technical expertise with floor leadership, supporting the team to ensure vehicles move through the reconditioning pipeline efficiently while meeting quality and safety standards.

This position is ideal for someone who thrives in a fast-paced, production-driven environment, leads from the floor, and is equally comfortable diagnosing and repairing vehicles while coaching others to succeed.

A $3,500 signing bonus will be paid after the successful completion of the 3-month probationary period.

What you’ll do:

• Own the Flow: Monitor the full reconditioning pipeline (Inspection, Mechanical, Bodyshop, Detail, Quality Control, Merchandising) to ensure vehicles progress smoothly and targets are met
• Hands-On Technical Execution: Perform inspections, repairs, and diagnostics while supporting the shop floor as a working lead
• Ontario Safety Inspections: Conduct Ontario Provincial Safety Inspections in accordance with all standards and requirements
• Eliminate Friction: Identify bottlenecks in real time and reallocate labour/resources to maintain throughput and cycle time targets
• Quality Gatekeeping: Audit vehicles at key stages to ensure all units meet “The Clutch Standard” before going live
• Coach & Develop: Provide real-time coaching, mentorship, and technical guidance to technicians and team members
• Lean Excellence: Drive continuous improvement through standardized work, 5S, and process optimization
• Data-Driven Leadership: Track and report KPIs such as throughput, cycle time, first-pass yield, turnaround time, and repair quality
• Documentation & Tools: Maintain accurate documentation for inspections, repairs, estimates, and diagnostics using shop systems (Google Drive, Slack, etc.)
• Safety First: Lead by example, enforce PPE compliance, and maintain a clean, organized, “tour-ready” workspace at all times

What you’ll need:

• 310S Red Seal (or equivalent certification)
• Experience working across domestic, import, and European vehicles
• Strong diagnostic and repair skills (brakes, suspension, oil changes, preventative maintenance, etc.)
• 1+ years of leadership experience
• 3+ years working in high-volume, fast-paced environments (automotive, manufacturing, logistics, or similar)
• Strong understanding of workflow optimization and standardized processes
• Experience with Lean principles such as 5S, Kanban, Six Sigma, or similar
• Strong attention to detail and commitment to quality
• Ability to multitask and adapt quickly in a fast-paced environment
• Strong communication skills with the ability to translate performance data into clear direction
• Comfortable using technology and shop systems

Other requirements:

• Valid driver’s license with a clean driver’s abstract
• Ability to work full-time (40 hours/week + overtime as required)
• Comfortable working in a shop environment

Why you’ll love it:

• Signing Bonus: $3,500 paid after the successful completion of the 3-month probationary period
• Modern Environment: Forget the “greasy garage” stereotype—you’ll work in a clean, organized, safety-conscious facility
• Impact: Your work directly affects the customer experience—every car you clear is a win for the brand
• Growth Opportunities: Strong performers have clear pathways into leadership and operations roles

Employment Type:

New, Permanent Full-Time

Schedule:

Evening Shift: Monday–Thursday, 4:30 PM – 3:00 AM

Compensation & Benefits:

• $40–$45 per hour + $1.50 shift premium
• Health & dental benefits
• Pay decisions reflect objective criteria including skills, performance, market benchmarking, responsibilities, and working conditions

Clutch is committed to fostering an inclusive workplace where all individuals have an opportunity to succeed. If you require accommodation at any stage of the interview process, please email talent@clutch.ca.

Location: 4951 - 110Avenue SE, Calgary, Alberta

About the Role

Reporting to the Facilities and Maintenance Supervisor, the Maintenance Technician is accountable for planning and coordinating maintenance activities and troubleshooting, maintaining and ensuring that all building and production equipment and systems are operating safely, effectively and in compliance pursuant to safety regulations and company operating standards. 

What you will be doing:

• Ensure all production equipment and automation meeting safety, food safety, and other applicable regulatory standards;
• Plan, coordinate, and perform  as needed,  daily, weekly, and monthly  preventive and/or predictive maintenance checklists, upkeep and calibrate general building (including racking, dock doors, waste management)  and production equipment (conveyors, automation, case sealers, material handling equipment), leveraging relevant job plans, procedures, and manuals;
• Troubleshoot electrical, mechanical, and other maintenance related problems; Assign criticality, prioritize maintenance jobs,  and define and oversee work required 
• Ensure maintenance and repair of  distribution center racking, walkies, power trucks, dock doors and perform repairs in the facility for a clean and steady operation
• Manage  tasks/work-orders on computer systems such as CMMS/GSheets
• Train new hires according to the training plan for machine operation; Train and oversee Maintenance Associates on complex tasks as required
• Conduct machine calibration and run-to-failure maintenance activities
• Perform regular facility inspections to ensure fire extinguishers, exits, emergency lighting and other safety features meet and/or exceed  regulatory requirements; perform repairs as required
• Coordinate with external contractors to define maintenance and reliability requirements, troubleshoot equipment, purchase and stock spares
• Support upgrades, replacements, overhaul and installation projects
• Maintain Department inventory, including Spare parts, Tools, Hardware and keeping records documented
• Update maintenance logs and ensure quality standards are maintained
• Work in compliance with OH&S acts and regulations
• Use personal protective and safety equipment and clothing as directed by the employer and report workplace hazards and dangers to the supervisor or employer
• Other duties as assigned

At a minimum, you have: 

• Post-secondary Education in Mechanical or Electro-Mechanical Engineering Diploma or equivalent work experience
• Minimum of 2 years of Facilities Maintenance experience and at least one year experience in a food processing or service environment/manufacturing industry.
• Has experience  standing for prolonged periods of time including regular bending, twisting and walking 
• Willing and able to push, pull, and lift up to 50lbs
• Skilled in using basic hand tools, power tools and measuring tools
• Ability to work calmly and effectively under pressure
• Ability to work in fast-paced, deadline-oriented environment
• Flexibility to work overtime, weekends, varying shifts and holiday work, as required
• Willing and able to work in a refrigerated environment (0°C to 4°C)
• Ability to communicate in English, both verbal and written
• Basic knowledge of Microsoft Office Suite (Word, Excel, PowerPoint), Google Suite (Calendar,Gmail,Docs,Sheets) and video conferencing (Hangouts, Google Meet)

What you’ll get in return:

• Competitive salary and health benefits
• Shift premiums are available for afternoon and overnight shifts
• 75% discount on HelloFresh or Chefs Plate weekly box subscription
• High impact work to help feed thousands of families in Canada
• Opportunity to learn and grow
• Work with a hard-working and supportive team

Working Conditions:

It’s no surprise that as a food company, we use many ingredients that may be considered common allergens (i.e. peanuts, tree nuts, milk, etc.). Whether this role is based out of our headquarters or one of our distribution centers, it is possible that you may be exposed to such allergens in this role. If you have any concerns with being exposed to any particular food ingredients, including meat, please disclose this during the hiring process.

If this sounds like you, please click the "Apply Now" button. If this role doesn't quite match what you're looking for, but you'd like to know more about joining the HelloFresh team, please visit our Jobs page to view our other vacancies. We'd love to hear from you!

HelloFresh Canada uses AI-integrated technology to help us process and evaluate applications more efficiently. This includes tools that screen and assess candidate qualifications based on the requirements for this role. While these tools assist our workflow, all final selection decisions are made by our hiring team.

This is a posting for an existing vacancy. We are actively seeking to fill this position.

#factor

#JD1008

                                                                                                                                        " $1500 SIGNING BONUS "

                                                                                                                                              " Quarterly Bonus"

                                                                                                                                              "Company Vehicle"

Vixxo is hiring a full-time Equipment Technician to service the Edmonton, Canada, area and its surrounding regions. Compensation ranges from $23 per hour to $29 per hour, depending on experience.

THE ROLE:

As an Equipment Technician, you will work independently to provide reactive and preventative maintenance services throughout an assigned territory– see for yourself how one of our technicians describes a day in the life by clicking here!

WHO WILL LOVE THIS JOB:

• A creative problem solver: You are energized by roadblocks and have a knack for troubleshooting problems in stride and solving them in a calm, cool, and collected manner.
• A clear communicator: You are customer-focused and able to explain technical concepts clearly and effectively to non-technical individuals
• A constant learner: You are not afraid to ask questions and are constantly striving to refine your technical expertise

TOP 3 RESPONSIBILITIES:

• Repair commercial espresso, coffee brewing, coffee grinding, and water systems throughout an assigned territory.
• Own relationships with your customers and inspire customer loyalty by providing professional and reliable services that adhere to all safety rules
• Meet Service Level Agreement (SLA) requirements required by customers, which include conducting thorough inspections, performing timely maintenance on equipment correctly the first time, and completing descriptive and accurate paperwork.

QUALIFICATIONS:

• People enjoy working with their hands and tinkering with anything electrical or mechanical.
• At least 1 year of experience in a customer-facing or customer-service role
• Must like coffee: Tasting is the final step in all repairs
• Smartphone proficient in inventory, manage scheduling, and other tasks
• Must possess a valid driver’s license with a clean driving record
• Must be able to lift 50 lbs. without assistance

WHAT VIXXO HAS TO OFFER YOU:

• $1500 signing bonus
• Competitive base pay based on experience and certifications; quarterly bonuses based on performance.
• Start with 10 days of PTO, 2 Floating Holidays, and 6 paid company holidays.
• Benefits-eligible in first 60 days: Medical and Dental Insurance
• Employer-paid short-term and long-term disability insurance and life insurance
• 401K Match
• Professional and career development opportunities
• Military Friendly and Equal Opportunity Employer

Successful applicants come from a variety of backgrounds, including HVAC Technicians, Maintenance Technicians, Field Service Technicians, Electricians, Plumbers, Service Technicians, ATM Technicians, Beverage Technicians, Pest Control Technicians, Photo Kiosk Repair, Coffee Retail, Barista, and Mechanical Repair.

About Clutch:

We’re on a mission to reinvent the way people buy, sell, and own cars. Are you game? Clutch is Canada’s largest online used car retailer, delivering a seamless, hassle-free car buying and selling experience to drivers everywhere. Customers can browse hundreds of cars from the comfort of their home, get the right one delivered to their door, and enjoy peace of mind with our 10-Day Money-Back Guarantee… and that’s just the beginning. Named two years in a row to the Globe & Mail’s list of the Top Growing Companies in Canada and awarded spots on Deloitte’s Technology Fast 50™ and Fast 500™ lists, we’re looking to add curious, hard-working, and driven individuals to our growing team. Headquartered in Toronto, Clutch was founded in 2017 and currently services Ontario, New Brunswick, Nova Scotia, and Prince Edward Island. Clutch is backed by a number of world-class investors, including D1 Capital, Canaan, Real Ventures, BrandProject, and Upper90. To learn more, visit clutch.ca.

About the role:

Clutch is looking for a Licensed Automotive Service Technician to join our team for the evening shift! The shift schedule is Monday to Thursday: 4:30 PM - 3:00 AM.

A $3,500 signing bonus will be paid after the 3-month probationary period. We’re looking for all-star licensed automotive mechanic talent to help ensure that all of our vehicles are up to our high mechanical standards. Working alongside our reconditioning team, you will perform vehicle inspections, maintenance work, and repairs across a range of systems.

What you’ll do:

• Perform Clutch standardized vehicle inspections (stationary and road tests)

• Diagnose and assess vehicle issues and damage

• Perform Ontario Provincial Safety Inspections

• Make recommendations about vehicle repairs and the best course of action

• Perform repairs and preventative maintenance such as oil changes, suspension and brake jobs

• Create and maintain documentation of repairs, inspections, and estimates

• Ensure vehicles meet Clutch’s mechanical and safety standards

• Communicate vehicle status, repair needs, and completion timelines

• Use diagnostic tools and shop systems (e.g., Google Drive, Slack)

• Contribute to continuous improvement of mechanical procedures

• Metrics/measurement of success include inspection thoroughness, repair quality, safety compliance, turnaround time, and documentation accuracy

What we’re looking for:

• 310S Red Seal or equivalent certification or training

• Experience working with a variety of car brands (domestic, import & European)

• Team player above all else

• Strong attention to detail

• Ability to multitask and prioritize competing demands

• Desire to learn new skills

• Comfortable using technology (Google Drive, Slack, etc.)

• Valid Driver’s License with a clean driver’s abstract

• Able to commit to a full-time schedule of 40 hours per week, including overtime based on business needs

Other items to note:

• Communication, problem resolution/analysis, customer service orientation

• Ability to work independently and with a team

• Working conditions in a shop environment

Why you’ll love it at Clutch:

• Autonomy & ownership – opportunity to build your process and influence the company workforce at every level

• Help shape the future of car buying and selling in Canada by leading a critical part of our vehicle quality process

• Broad and direct ownership over mechanical standards and vehicle readiness during a phase of rapid growth

• Dedicated to attracting and retaining top talent with top-of-market compensation packages

• Above market health & dental benefits

Employment Type:

• New, Permanent Full-Time

Compensation & Benefits:

• Wage: $34.00 - $39.00 per hour + 1.50 Shift Premium 

• Benefits: Comprehensive benefits plans include healthcare, dental care, vision care, prescriptions, life insurance, and dependent coverage; start from day 1. (Applicable for Permanent Full-Time)

• Pay decisions reflect objective criteria: skills, performance, market benchmarking, responsibilities, and working conditions

Clutch is committed to fostering an inclusive workplace where all individuals have an opportunity to succeed. If you require accommodation at any stage of the interview process, please email talent@clutch.ca.

Location: HWY 403 & Dundas St W, Mississauga

Shift: This role will provide a full time schedule covering a 4 day work week from 4:00 PM to 2:30 AM, flexibility to work outside this time may be required as per business needs.

About the Role

Reporting to the Facilities and Maintenance Supervisor, the Maintenance Technician II is accountable for planning and coordinating maintenance activities and troubleshooting, maintaining and ensuring that all building and production equipment and systems are operating safely, effectively and in compliance pursuant to safety regulations and company operating standards. 

What you will be doing:

• Ensure all production equipment and automation meeting safety, food safety, and other applicable regulatory standards;
• Plan, coordinate, and perform  as needed,  daily, weekly, and monthly  preventive and/or predictive maintenance checklists, upkeep and calibrate general building (including racking, dock doors, waste management)  and production equipment (conveyors, automation, case sealers, material handling equipment), leveraging relevant job plans, procedures, and manuals;
• Troubleshoot electrical, mechanical, and other maintenance related problems; Assign criticality, prioritize maintenance jobs,  and define and oversee work required 
• Ensure maintenance and repair of  distribution center racking, walkies, power trucks, dock doors and perform repairs in the facility for a clean and steady operation
• Manage  tasks/work-orders on computer systems such as CMMS/GSheets
• Train new hires according to the training plan for machine operation; Train and oversee Maintenance Associates on complex tasks as required
• Conduct machine calibration and run-to-failure maintenance activities
• Perform regular facility inspections to ensure fire extinguishers, exits, emergency lighting and other safety features meet and/or exceed  regulatory requirements; perform repairs as required
• Coordinate with external contractors to define maintenance and reliability requirements, troubleshoot equipment, purchase and stock spares
• Support upgrades, replacements, overhaul and installation projects
• Maintain Department inventory, including Spare parts, Tools, Hardware and keeping records documented
• Update maintenance logs and ensure quality standards are maintained
• Work in compliance with OH&S acts and regulations
• Use personal protective and safety equipment and clothing as directed by the employer and report workplace hazards and dangers to the supervisor or employer
• Other duties as assigned

At a minimum, you have: 

ements

• Post-secondary Education in Mechanical or Electro-Mechanical Engineering Diploma or equivalent work experience
• Minimum of 2 years of Facilities Maintenance experience and at least one year experience in a food processing or service environment/manufacturing industry.
• Has experience  standing for prolonged periods of time including regular bending, twisting and walking 
• Willing and able to push, pull, and lift up to 50lbs
• Skilled in using basic hand tools, power tools and measuring tools
• Ability to work calmly and effectively under pressure
• Ability to work in fast-paced, deadline-oriented environment
• Flexibility to work overtime, weekends, varying shifts and holiday work, as required
• Willing and able to work in a refrigerated environment (0°C to 4°C)
• Ability to communicate in English, both verbal and written
• Basic knowledge of Microsoft Office Suite (Word, Excel, PowerPoint), Google Suite (Calendar,Gmail,Docs,Sheets) and video conferencing (Hangouts, Google Meet)

What you’ll get in return:

• Competitive salary and health benefits
• Shift premiums are available for afternoon and overnight shifts
• 75% discount on HelloFresh or Chefs Plate weekly box subscription
• High impact work to help feed thousands of families in Canada
• Opportunity to learn and grow
• Work with a hard-working and supportive team

Working Conditions:

It’s no surprise that as a food company, we use many ingredients that may be considered common allergens (i.e. peanuts, tree nuts, milk, etc.). Whether this role is based out of our headquarters or one of our distribution centers, it is possible that you may be exposed to such allergens in this role. If you have any concerns with being exposed to any particular food ingredients, including meat, please disclose this during the hiring process.

If this sounds like you, please click the "Apply Now" button. If this role doesn't quite match what you're looking for, but you'd like to know more about joining the HelloFresh team, please visit our Jobs page to view our other vacancies. We'd love to hear from you!

HelloFresh Canada uses AI-integrated technology to help us process and evaluate applications more efficiently. This includes tools that screen and assess candidate qualifications based on the requirements for this role. While these tools assist our workflow, all final selection decisions are made by our hiring team.

This is a posting for an existing vacancy. We are actively seeking to fill this position.

#factor

#JD1008

About Clutch:

We’re on a mission to reinvent the way people buy, sell, and own cars. Are you game?

Clutch is Canada’s largest online used car retailer, delivering a seamless, hassle-free car buying and selling experience to drivers everywhere. Customers can browse hundreds of cars from the comfort of their home, get the right one delivered to their door, and enjoy peace of mind with our 10-Day Money-Back Guarantee… and that’s just the beginning.

Named two years in a row to the Globe & Mail’s list of the Top Growing Companies in Canada and awarded spots on Deloitte’s Technology Fast 50™ and Fast 500™ lists, we’re looking to add curious, hard-working, and driven individuals to our growing team.

Headquartered in Toronto, Clutch was founded in 2017 and currently services Ontario, New Brunswick, Nova Scotia, and Prince Edward Island. Clutch is backed by a number of world-class investors, including D1 Capital, Canaan, Real Ventures, BrandProject, and Upper90. To learn more, visit clutch.ca.

About the role:

Clutch is looking for a Licensed Automotive Service Technician to join our team! A $3,000 signing bonus will be paid after the 3-month probationary period. We’re looking for all-star licensed automotive mechanic talent to help ensure that all of our vehicles are up to our high mechanical standards. Working alongside our reconditioning team, you will perform vehicle inspections, maintenance work, and repairs across a range of systems.

What you’ll do:

• Perform Clutch standardized vehicle inspections (stationary and road tests)

• Diagnose and assess vehicle issues and damage

• Perform Ontario Provincial Safety Inspections

• Make recommendations about vehicle repairs and the best course of action

• Perform repairs and preventative maintenance such as oil changes, suspension and brake jobs

• Create and maintain documentation of repairs, inspections, and estimates

• Ensure vehicles meet Clutch’s mechanical and safety standards

• Communicate vehicle status, repair needs, and completion timelines

• Use diagnostic tools and shop systems (e.g., Google Drive, Slack)

• Contribute to continuous improvement of mechanical procedures

• Metrics/measurement of success include inspection thoroughness, repair quality, safety compliance, turnaround time, and documentation accuracy

What we’re looking for:

• 310s Red Seal or equivalent certification or training

• Experience working with a variety of car brands (domestic, import & European)

• Team player above all else

• Strong attention to detail

• Ability to multitask and prioritize competing demands

• Desire to learn new skills

• Comfortable using technology (Google Drive, Slack, etc.)

• Valid Driver’s License with a clean driver’s abstract

• Able to commit to a full-time schedule of 40 hours per week, including overtime based on business needs. 

Other items to note:

• Communication, problem resolution/analysis, customer service orientation

• Ability to work independently and with a team

• Working conditions in a shop environment

It’d be great if you have:

• Experience with advanced diagnostic tools

• Previous work in reconditioning, dealership, or high-volume inspection environments

Why you’ll love it at Clutch:

• Autonomy & ownership – opportunity to build your process and influence the company workforce at every level

• Help shape the future of car buying and selling in Canada by leading a critical part of our vehicle quality process

• Broad and direct ownership over mechanical standards and vehicle readiness during a phase of rapid growth

• Dedicated to attracting and retaining top talent with top-of-market compensation packages

• Above market health & dental benefits

Employment Type:

• Existing, Permanent Full-Time

Compensation & Benefits:

• Wage: $34.00 - $39.00 per hour

• Benefits: Comprehensive benefits plans include healthcare, dental care, vision care, prescriptions, life insurance, and dependent coverage; start from day 1. (Applicable for Permanent Full-Time)

• Pay decisions reflect objective criteria: skills, performance, market benchmarking, responsibilities, and working conditions

Clutch is committed to fostering an inclusive workplace where all individuals have an opportunity to succeed. If you require accommodation at any stage of the interview process, please email talent@clutch.ca

About Clutch:

We’re on a mission to reinvent the way people buy, sell, and own cars. Are you game?

Clutch is Canada’s largest online used car retailer, delivering a seamless, hassle-free car-buying experience to drivers everywhere. Customers can browse hundreds of cars from the comfort of their home, get the right one delivered to their door, and enjoy peace of mind with our 10-Day Money-Back Guarantee… and that’s just the beginning.

Named two years in a row to the Globe & Mail’s list of the Top Growing Companies in Canada and also awarded spots on Deloitte’s Technology Fast 50™ and Fast 500™ lists, we’re looking to add curious, hard-working, and driven individuals to our growing team.

Headquartered in Toronto, Clutch was founded in 2017 and currently services Ontario and the Maritimes. Clutch is backed by a number of world-class investors including D1 Capital Partners, Canaan, BrandProject, Real Ventures, Upper90, FJ Labs, Global Founders Capital, and Azure Capital Partners.

About the Role:

We are looking for Automotive Apprentice Service Technicians to join our reconditioning facility team! In this role, you will help ensure vehicles are inspected and repaired according to Clutch’s standards. You will coordinate with the reconditioning team, track repair progress, and assist in keeping our workflow efficient and organized.

What You’ll Do:

• Review repair and maintenance needs for vehicles in our reconditioning facility.

• Coordinate minor repairs and preventative maintenance tasks with the mechanic team.

• Track repair schedules, updates, and documentation in internal systems.

• Communicate with management and team members regarding repair status.

• Support high-volume workflow in a fast-paced environment.

• Maintain organized records of repair and maintenance activities.

• Identify and help resolve discrepancies between repair estimates, progress, and standards.

What We’re Looking For:

• Education: High school diploma or equivalent; technical school or automotive program background is an asset.

• Experience: Minimum 3 years as an apprentice automotive technician.

• Skills: Strong organizational skills, attention to detail, ability to multitask, and professional communication.

• License: Valid driver’s license (minimum G2).

• Work Authorization: Legally authorized to work in Canada.

• Location: Ability to commute to Mississauga.

• Able to commit to a full-time schedule of 40 hours per week, including overtime based on business needs.

Other Items to Note:

• Communication: Frequent interaction with management and reconditioning teams.

• Problem Resolution/Analysis: Identify workflow or repair issues and escalate when needed.

• Team/Individual Contributor: Balance independent tasks with coordination of team activities.

• Working Conditions: On-site role in a reconditioning facility.

It’d be Great if You Have:

• Previous administrative or automotive support experience.

• Familiarity with automotive repair terminology or shop operations.

• Experience using scheduling, workflow, or task management tools.

Why You’ll Love it at Clutch:

• Autonomy & ownership – opportunity to build your process and influence the company workforce at every level.

• Help shape the future of car buying and selling in Canada by leading a critical part of our reconditioning workflow.

• Broad ownership over vehicle repair coordination during a phase of rapid growth.

• Competitive compensation and top-of-market benefits.

• Above-market health & dental coverage starting from day one.

Employment Type:
Existing, Permanent Full-Time

Compensation & Benefits:
Wage: $18.00 - $27.00 per hour
Benefits: Comprehensive healthcare, dental, vision, prescription, life insurance, and dependent coverage starting day one

Clutch is committed to fostering an inclusive workplace where all individuals have an opportunity to succeed. If you require accommodation at any stage of the interview process, please email talent@clutch.ca.

About Yondr

Yondr is a disruptor. We challenge convention and simplify complexity. A global developer, owner operator and service provider of data centers, we deliver complex data center capacity needs for the world’s largest tech companies. Our exponential growth sees us looking for extraordinary people to help accelerate us towards our vision: a tomorrow without constraints. But we can’t do this without you.

The Role

The Critical Facility Shift Technician is responsible for the safe, reliable, and efficient operation of mission-critical infrastructure within the data center. This role covers all aspects of energy isolation, switch activity, and facility rounds, ensuring compliance with safety standards and operational procedures. The Critical Facility Technician reports directly to the Critical Facility Shift Manager and works as part of a larger team that strives for excellence through teamwork and accountability. This is a shift-based role requiring flexibility to work nights, weekends, and holidays as part of a 24/7 operations team. 

Main responsibilities

• Operations & Rounds 

• Conduct scheduled and unscheduled facility rounds, inspecting all critical systems (electrical, mechanical, HVAC, fire/life safety, and security) for proper operation and signs of abnormality. 

• Monitor Building Management System (BMS), Electrical Power Monitoring System (EPMS), and other automation platforms for alarms and alerts; respond promptly per SOPs. 

• Maintain accurate logs of alarms, operational events, isolations, and shift activities. 

• Ensure all Statuory PPM workorders are completed ontime and any resulting actions are logged and tracked and remediated in good time. 

• Ensure all Yondr self delivered works are covered by acurate and relevant risk and method statements. 

• Confirm that all contractor RAMS are accurate before the work tasks start. 

• Perform routine inspections and preventive maintenance tasks as assigned. 

• Energy Isolation & Switch Activity 

• Execute all energy isolation procedures, including Lockout/Tagout (LOTO), in accordance with company policy and regulatory requirements. 

• Perform and document all switchgear operations, including breaker racking, transfer switches, and panel isolations. 

• Verify isolation and de-energization prior to work; ensure proper signage, barricading, and communication. 

• Coordinate with vendors and other teams for planned and emergency isolations. 

• Maintain records of all isolation activities, including authorization, verification, and restoration. 

• Incident Response & Troubleshooting 

• Respond to alarms, system notifications, and abnormal conditions; perform initial diagnostics and escalate as needed. 

• Support incident response efforts, including root cause analysis and after-action reporting. 

• Participate in emergency procedures, including system recovery and safe shutdowns. 

• Compliance & Documentation 

• Adhere to all safety, environmental, and regulatory standards. 

• Ensure all work is performed per approved Method of Procedure (MOP), Standard Operating Procedure (SOP), and Emergency Operating Procedure (EOP). 

• Maintain up-to-date documentation for rounds, isolations, switch activities, and maintenance tasks. 

• Continuous Improvement & Teamwork 

• Identify opportunities for operational improvement and risk reduction. 

• Participate in training and periodic program reviews. 

• Support development and review of procedures and playbooks. 

• Collaborate closely with team members, sharing knowledge and supporting a culture of accountability and mutual respect. 

• Ensure the Yondr brand is maintained as a first class operator with all vcisitors and contractors. 

Qualifications and experience

• High school diploma or equivalent required; technical certification (electrical, mechanical, HVAC, or related field) preferred. 

• 2+ years of experience in mission-critical environments (data center, hospital, industrial plant, etc.). 

• Demonstrated experience with energy isolation, LOTO, and switchgear operations. 

• Technical Skills 

• Strong understanding of electrical and mechanical systems, including UPS, generators, switchgear, PDUs, CRAC/CRAH units, and fire/life safety systems. 

• Proficiency in BMS/EPMS platforms and alarm management. 

• Ability to read and interpret one-line diagrams, MOPs, SOPs, and EOPs. 

• Safety & Compliance 

• Knowledge of OSHA, NFPA 70E, and other relevant safety standards. 

• Experience performing LOTO and energy isolation in accordance with regulatory and company requirements. 

• Other Requirements 

• Excellent communication and documentation skills. 

• Ability to work shifts, including nights, weekends, and holidays as required. 

• Commitment to continuous learning and professional development. 

• Strong teamwork and accountability mindset. 

At Yondr, we want to enhance the diversity, equity, inclusion and belonging of our workforce to reflect the world we live in. Our roles are potential opportunities for everyone; all interested parties, regardless of nationality, race, ethnicity, religion, age, sexual orientation, or gender, are welcome to apply. We ensure all candidates have equitable access and consideration throughout the hiring process. 

Yondr is committed to fostering a welcoming, safe and inclusive work environment. We provide support through our benefits, which are inclusive of all backgrounds. 

AirSculpt is now hiring casual MDRTs in Toronto! Casual MDRTs will work 1-2 days per week and approximately 1 Saturday each month. 

About Us

AirSculpt® is a next-generation body contouring treatment designed to optimize both comfort and precision, available exclusively at AirSculpt offices. This minimally invasive procedure removes unwanted fat, tightens skin, and can transfer fat to enhance other areas, sculpting targeted areas of the body with precise results and minimal downtime. More than 75,000 cases have been performed in AirSculpt's 30+ premium locations throughout the United States and Canada.

Your Role

The Medical Device Reprocessing Technician is responsible for performing the responsibilities of instrument cleaning, processing, and sterilization in accordance with manufacturer recommendations; maintaining appropriate logs to meet regulatory and sterilization standards; performing various cleaning functions/services throughout the clinic in order to uphold an orderly, safe, clean and attractive clinical environment; understanding and following Workplace Hazardous Materials Information System (WHMIS) guidelines; restocking supplies and performing other related duties as assigned. 

Primary Job Responsibilities:

• Perform all MDR duties in an ethical and legal manner that ensures patient safety
• Understand and apply infection prevention and control measures in all areas of clinical practice
• Safely and correctly operate a variety of onsite MDR equipment
• Routine maintenance and quality control of MDR equipment
• Maintenance of appropriate MDR logs and records
• Perform key components during each stage of reprocessing in order to achieve disinfection or sterilization of medical equipment
• Clean, sanitize and stock exam, waiting, procedure and recovery rooms
• Prepare instruments and supplies for storage and distribution by checking, assembling, packaging, wrapping and sterilizing according to established policies.
• Report and/or remove any malfunctioning equipment or damaged instruments.
• Rotate stock and reprocess outdated supplies according to clinic procedures.
• Other related duties as required

Qualifications and Skills:

• Physical endurance to meet the demands of the job
• Demonstrated experience using reprocessing equipment. For example, washer disinfectors, steam sterilizers, low temperature sterilizer
• Ability to organize and prioritize the work flow as needed.
• Must have an eye for detail and good judgment skills.
• Interest in the health services field and comfort with medical procedures.
• Must be able to work effectively and productively both independently and as part of the team.
• Excellent communication and interpersonal skills.
• Must have an empathetic approach towards our patients.
• Ability to multitask as needed.

Education & Experience:

• Minimum grade 12 education required
• Successful completion of a recognized Sterile Processing Technician Certificate Program, Medical Device Reprocessing Technician course (MDRT).
• Recent related experience or an equivalent combination of education, training and experience (e.g., Medical Device Reprocessing Theory, or CMDRT certification would be an asset).
• Experience in a medical practitioner’s office, customer service and/or patient care or other medical administrative experience is an asset.

Full compensation packages are based on candidate experience and relevant licenses or certifications.

AirSculpt provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.