Position Overview

Woolpert is hiring a Roadway Engineer to join our dynamic Transportation Team at one of Ohio office. This position reports to the Roadway Engineer and is responsible for projects spanning multiple states, multiple clients and presenting unique challenges. Given the wide range of projects and clients, our engineers are exposed to a number of different practices which allow them to not only become well rounded, but also to find a specialty they have interest in. While work is usually related to transportation, engineers regularly work in disciplines outside of the standard transportation roles. These can include work with aviation, military, private development as well as bikeways and trails. 

We are unable to provide visa sponsorship for this position.  Applicants must already possess work authorization in the country the job is located.

Qualified candidates may be eligible for a signing bonus of up to $5,000, based on experience and role alignment. Bonus eligibility is contingent upon 12 months of service and must be repaid if the employee leaves the company within one year of hire.

What You Will Do:

• Work as part of a diverse design Team to provide design services across a variety of practices.
• Lead design or help design complex roadway and transportation projects that require creative solutions. Projects include roadway, bikeways, pedestrian facilities, roundabouts, trails, multi-modal transportation or transportation planning.
• Perform engineering design tasks such as highway and street design, roadway alignments, roundabout design, roadway grading and modeling, curb ramp design, signing and pavement plan, maintenance of traffic, storm drainage.
• Use local and federal roadway standards to prepare preliminary and final design documents, cost estimates, and bid documents.
• Perform designs using software including Microstation, OpenRoads Designer (ORD), AutoCAD, and/or Civil 3D.
• Assist Project Managers in the writing of proposals as well as preparing scope, schedule and budget of projects

What You Will Bring:

• BS in Civil Engineering or related technical design field.
• A minimum of 4 years of professional experience required.
• Licensed PE in Ohio, or has the ability to obtain within one year of employment.
• Experience in Roadway, Highway, Trail, Bikeway/Pedestrian and/or Roadway Drainage design.
• Proficiency in Civil 3D and/or Microstation OpenRoads Designer (ORD).
• Experience with DOT projects is preferred.
• Possess strong organizational skills to successfully manage multiple priorities.
• Be committed to team efforts and be willing to act independently.
• Good communications skills, including oral and written communication.
• Proficiency with Microsoft Office (Word, Excel)

#LI-AT1

Benefits You Will Love

Certified as a Great Place to Work, Woolpert is one of the fastest-growing architecture, engineering, and geospatial companies in the world. With over 75 offices and countless projects around the globe, you’ll work on meaningful assignments that improve quality of life around the world. In addition to offering competitive pay, we provide employees with a robust set of unique benefits, including:

• Freedom to Work program: Set your own schedule and location (as appropriate).
• Principal program: Earn the opportunity to become an owner of the firm.
• Flexible paid time off/vacation: Take time off when it makes sense for you and your team.
• Career development: Explore a wide range of learning and growth opportunities within and across industries.
• Health, life, vision, and dental insurance: Cover all your medical bases.
• Paid sick time, retirement plan, fitness reimbursement, pet insurance, identity protection, technology stipend, employee assistance program, and more!

Position Summary:

IEM is currently seeking a Supplier Quality Engineer for our Jacksonville, FL. locations and will report into the Director of Quality. The top priorities of this position will be to develop and maintain strong relationships with suppliers and vendors, as well as implement Vendor Management program and supporting metrics. Significant involvement with all areas of vendors/suppliers and manufacturing, while also increasing our communication and collaboration with key departments is instrumental in this position.

Please note: This position requires 100% in-office presence in our Jacksonville, FL. offices and does not offer remote work.
 

 ESSENTIAL FUNCTIONS:

• Ensuring suppliers for IEM maintains all regulations and requirements
• Updating the supplier database with continuously updated records of performance
• Creating quality control guidelines and protocols
• Providing advice to vendors on how to reduce defect rates
• Performing logistics tasks, such as communicating with vendors when supplies don’t meet quality standards
• Assessing products and supplies from vendors to ensure their quality
• Creating and promoting strategies to increase the quality and efficiency of systems and products
• Conducting audits of supplier management quality systems
• Acting as a liaison between vendors and company leaders, determining solutions to any challenges to quality standards
• Visiting vendor facilities to ensure they uphold quality standards
• Developing and maintaining relationships with suppliers and vendors
• Oversee and develop process improvements strategies and document
• Develop & implement Vendor Management program and supporting metrics
• Any other related duties in connection with the position including but not limited to:
• Risk Assessments, PFMEA, Six Sigma, 5S, FOD Prevention, Kaizen, IPC Standards
• Understanding of UL, CSA and other regulatory requirements
• Must abide by Health and Safety Rules and have demonstrated commitment to good housekeeping/organizational practices
• Responsible for compliance to company and regulatory standards
• Maintain and develop strong working relationships with other departments outside vendors
• Strive for continuous improvement in all aspects of the work environment, this includes active participation in company committees, project teams and relevant job training
• Commit to self-development goals as discussed with your Vice President and attend company-sponsored training
• Perform other duties as assigned by Vice President
• The candidate will be expected to perform additional duties as assigned to support the team and organization

COMPETENCIES:

• Verbal and written communication proficiency
• Attention to detail
• Thorough compliance knowledge
• Organizational and time management skills
• Reliable with a respect to confidentiality
• Quality management systems
• Root-cause analysis
• Quality Control
• Technical Skills
• Quality Engineering
• Collaboration
• Statistics
• Continual improvement process
• Supply chain experience
• Quality Assurance

EDUCATION AND EXPERIENCE:

• Diploma in relevant field with work experience
• Related experience on Infor Syteline ERP systems
• Advanced proficiency of Microsoft Office applications (Access, Outlook, Excel and PowerPoint)
• Excellent verbal and written communication skills
• Ability to multi-task and prioritize in a fast-paced manufacturing environment
• Understanding of Mechanical Engineering and/or Electrical Engineering and/or Materials Engineering
• Demonstrated career ambition with a track record of growth and increasing responsibility; highly promotable with the potential to take on broader leadership roles within a fast-paced, high-growth organization

PHYSICAL/MENTAL/ENVIRONMENTAL:

Physical Demands:

Activities: Sitting – 70% Walking/Standing – 30% Travel – 30%

Lifting: Must be able to lift up to 10lbs.

Vision: Long periods of close work on computer screen.

Mental Demands: Interpret, analyze, research and handle multiple tasks simultaneously.

Environment: Climate controlled office space 70% with 30% in production areas.

Position Summary

The Lead R&D Engineer is responsible for managing group engineers and leading the design and validation of new medium voltage power distribution products. This role includes performing and overseeing complex projects that require extensive 3D modeling and 2D drafting while ensuring design accuracy and alignment with project requirements. The Lead R&D Engineer facilitates the development of innovative products that meet industry standards, regulatory requirements, and customer needs while optimizing performance, manufacturability, and cost. Additionally, the Lead R&D Engineer directly manages engineers and collaborates with the Engineering Manager to proactively identify and address project and personnel challenges, ensuring successful outcomes.

Key Responsibilities

•  Lead the design, analysis, and validation of new medium voltage power distribution products, including metal clad and metal enclosed switchgear, and related components.
•  Responsible for managing and mentoring engineers and designers, providing career guidance, constructive feedback, tracking project timelines, and ensuring quality and efficiency in deliverables.
•  Working closely with the Engineering Manager to identify issues quickly and ensure they are addressed in an appropriate and timely manner.
• Driving group on time performance while minimizing design errors for NPI project deliverables.
•  Leading the development of mechanical designs to meet NPI project-specific requirements.
• Conducting peer reviews and providing constructive feedback to team engineers to improve design quality and ensure alignment with project goals.
• Mentoring and supervising group engineers and designers to foster team growth and ensure efficient workflow in a collaborative environment.

New Process Implementation (NPI):

• Ensure NPI projects comply with customer specifications, industry standards, manufacturability, and internal quality benchmarks.
• Track project metrics such as TTM, design errors, and revision cycles to areas for improvement with the engineering manager.

Technical Leadership and Mentorship:

•  Foster a culture of innovation and continuous improvement within the team.
• Provide guidance and mentorship to team members, promoting professional growth.
• Resolve team conflicts to maintain a productive working environment.
• Assist in training team members in best practices for 3D SolidWorks modeling, 2D AutoCAD drafting, and compliance with design standards.
•  Provide constructive feedback during peer reviews to improve the team's technical output.

Collaboration and Support:

•  Facilitate communication between design and manufacturing teams to align processes.
•  Establish a feedback loop with manufacturing engineers to optimize designs for manufacturability and to adjust design standards.
• Act as a point of contact for technical inquiries for the operations team.
•  Facilitate communication and collaboration across multiple engineering and manufacturing sites to align expectations and processes.

Qualifications

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering or a related field, MSME is preferred.
•  10+ years of experience in R&D, product development, or a related field within the power distribution industry.
• Demonstrated track record of leading successful engineering projects and developing new technologies.
• Experience in medium voltage power distribution systems, including electrical, thermal, and mechanical considerations.
• Experience in leadership and mentoring and fostering a culture of innovation and continuous improvement.
• Experience working in a design-to-order or custom engineering environment is strongly preferred.
• Ability to manage multiple projects and prioritize tasks effectively in a fast-paced environment.
• Familiarity with low voltage switchgear, panelboards, utility systems, or the power industry is preferred.
• Proficiency in sheet metal design, including manufacturability and cost optimization.
• Strong attention to detail, analytical thinking, and problem-solving abilities.
•  Proficiency with SolidWorks, AutoCAD, or similar; CFD (Computer Fluid Dynamics) or Finite Element Analysis (FEA) experience is a plus.
• Knowledge of IEEE/ANSI C37.20.2, C37.04, C37.06, C37.09; CSA C22.2 No. 31-M89; EEMAC G8-3.2 design guidelines and NFPA70E are desirable.
• Strong communication skills, both written and verbal, with the ability to collaborate across teams.

Location

This position is available in multiple locations, including Franklin (TN), Tualatin (OR), Jacksonville (FL).

Position Summary

The Lead R&D Engineer is responsible for managing group engineers and leading the design and validation of new medium voltage power distribution products. This role includes performing and overseeing complex projects that require extensive 3D modeling and 2D drafting while ensuring design accuracy and alignment with project requirements. The Lead R&D Engineer facilitates the development of innovative products that meet industry standards, regulatory requirements, and customer needs while optimizing performance, manufacturability, and cost. Additionally, the Lead R&D Engineer directly manages engineers and collaborates with the Engineering Manager to proactively identify and address project and personnel challenges, ensuring successful outcomes.

Key Responsibilities

•  Lead the design, analysis, and validation of new medium voltage power distribution products, including metal clad and metal enclosed switchgear, and related components.
•  Responsible for managing and mentoring engineers and designers, providing career guidance, constructive feedback, tracking project timelines, and ensuring quality and efficiency in deliverables.
•  Working closely with the Engineering Manager to identify issues quickly and ensure they are addressed in an appropriate and timely manner.
• Driving group on time performance while minimizing design errors for NPI project deliverables.
•  Leading the development of mechanical designs to meet NPI project-specific requirements.
• Conducting peer reviews and providing constructive feedback to team engineers to improve design quality and ensure alignment with project goals.
• Mentoring and supervising group engineers and designers to foster team growth and ensure efficient workflow in a collaborative environment.

New Process Implementation (NPI):

• Ensure NPI projects comply with customer specifications, industry standards, manufacturability, and internal quality benchmarks.
• Track project metrics such as TTM, design errors, and revision cycles to areas for improvement with the engineering manager.

Technical Leadership and Mentorship:

•  Foster a culture of innovation and continuous improvement within the team.
• Provide guidance and mentorship to team members, promoting professional growth.
• Resolve team conflicts to maintain a productive working environment.
• Assist in training team members in best practices for 3D SolidWorks modeling, 2D AutoCAD drafting, and compliance with design standards.
•  Provide constructive feedback during peer reviews to improve the team's technical output.

Collaboration and Support:

•  Facilitate communication between design and manufacturing teams to align processes.
•  Establish a feedback loop with manufacturing engineers to optimize designs for manufacturability and to adjust design standards.
• Act as a point of contact for technical inquiries for the operations team.
•  Facilitate communication and collaboration across multiple engineering and manufacturing sites to align expectations and processes.

Qualifications

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering or a related field, MSME is preferred.
•  10+ years of experience in R&D, product development, or a related field within the power distribution industry.
• Demonstrated track record of leading successful engineering projects and developing new technologies.
• Experience in medium voltage power distribution systems, including electrical, thermal, and mechanical considerations.
• Experience in leadership and mentoring and fostering a culture of innovation and continuous improvement.
• Experience working in a design-to-order or custom engineering environment is strongly preferred.
• Ability to manage multiple projects and prioritize tasks effectively in a fast-paced environment.
• Familiarity with low voltage switchgear, panelboards, utility systems, or the power industry is preferred.
• Proficiency in sheet metal design, including manufacturability and cost optimization.
• Strong attention to detail, analytical thinking, and problem-solving abilities.
•  Proficiency with SolidWorks, AutoCAD, or similar; CFD (Computer Fluid Dynamics) or Finite Element Analysis (FEA) experience is a plus.
• Knowledge of IEEE/ANSI C37.20.2, C37.04, C37.06, C37.09; CSA C22.2 No. 31-M89; EEMAC G8-3.2 design guidelines and NFPA70E are desirable.
• Strong communication skills, both written and verbal, with the ability to collaborate across teams.

Location

This position is available in multiple locations, including Franklin (TN), Tualatin (OR), Jacksonville (FL).

Position Summary

The BOD (Basis of Design) Program Manager is responsible for the leadership, planning and execution of multiple high priority and/or strategic BOD Projects; high-flow production orders in an engineer to order environment. This role ensures that all Engineering-related milestones (Design Reviews, Design Releases, Production Readiness Reviews, etc.) are completed on time and to the highest standards of quality. The BOD Program Manager will lead, manage and collaborate cross-functionally among Sales, Engineering, Operations, and Senior Management.

Key Responsibilities

• Lead cross-functional Project Teams, successfully driving projects to completion.
• Collaborate and influence resources managers to implement, monitor, and maintain the resources capacity planning for their projects.
• Schedule, facilitate, and document kickoff meetings, design reviews, and Production Readiness Reviews.
• Track progress of design activities across electrical, mechanical, wiring, manufacturing and process engineering disciplines
• Coordinate follow-up communications after Engineering release, ensuring Quality, Operations, and Sales have required documentation
• Act as the central point of communication for Sales, Engineering, Operations, and Senior Management on BOD Project status and deliverables.
• Coordinate with Operations to ensure production readiness: run the meeting, create punch lists, and follow up to resolution and provide formal notification to relevant stakeholders
• Coordinate change management for customer-driven change notices and major design revisions.
• Notify Senior Management and Engineering Leadership of gate review readiness and assist in lessons learned sessions for continuous process improvement
• Report project performance to management stakeholders
• Influence and support Project Management team members on best practices

Qualifications

Competencies:

• Demonstrated ability to plan, execute, and oversee complex process milestones on time and in accordance with company standards
• Proficiency with Project Management tools for scheduling, task tracking, and milestone monitoring
• Exceptional organizational skills to manage multiple tasks, meetings, and priorities simultaneously
• Strong verbal and written communication skills to effectively lead and coordinate cross-functional stakeholders
• Excellent analytical and problem-solving skills to identify process bottlenecks and drive resolution
• Commitment to continuous improvement and implementation of best practices
• Exceptional ability to build and maintain collaborative relationships with key stakeholders, including Senior Management.
• Proficient in Microsoft Office Suite (Project, Word, Excel, PowerPoint), and Microsoft Teams
• Familiarity with engineering review processes, production readiness protocols, and manufacturing process workflows.
• Strong ability to negotiate through conflicts; listening, understanding, problem solving, patience.

Education and Experience

• Bachelor’s degree in Engineering, Program Management, or related field
• 5+ years of project management or related experience within an engineering or manufacturing environment
• Demonstrated capability leading high complexity and/or strategic projects
• Experience facilitating technical design reviews and manufacturing readiness assessments
• Expert written and verbal communication skills
• PMP (Project Management Professional) or equivalent certification a plus

Workplace Conditions

• Flexible work location (on-site, hybrid, or remote based on business needs)
• Travel requirements based on Project and Stakeholder needs
• Collaborative, cross-functional team environment supporting Design Engineering delivery and Project Execution

Compensation

The salary range for this role is $130,000 -$150,000 per year, based on location, experience, and qualifications.

We are looking for a Staff Software Engineer to join our Engineering team.

What you’ll do:

• Architect resilient software components within a distributed Python and C environment (K8s, EKS, EC2, Lambda, RDS, etc). 
• Take full ownership for solving complex problems from inception to execution. 
• Drive team and organization strategy with minimal guidance, ensuring technical decisions directly support company goals.
• Proactively identify and resolve technical debt or process friction, simplifying the codebase and developer experience to improve team velocity.
• Coach and mentor engineers, to build a high-performance culture. Serve as a subject matter expert who remains approachable.
• Proactively communicate, identify and mitigate technical risks, navigating trade-offs between system constraints and business impact. 
• Build trust with functional leaders and stakeholders, communicating highly technical concepts into clear dialogue to gain alignment on priorities.
• Work with Python and C applications  to resolve wide-ranging issues, and drive feature implementation. 

What you’ll need:

• Bachelor's Degree in Computer Science or related field.
• 6+ years programming experience, ideally on a modern stack.
• Experience: 4+ years of experience writing high-quality, production-grade Python.
• Hands-on experience with Continuous Delivery principles and techniques, including unit testing and build & deploy pipelines.
• Ability to lead and influence a team's technical direction.
• Hands-on experience with AWS or similar cloud technologies (RDS, Aurora, Dynamo, EKS, or Lambda) and Kubernetes.
• Demonstrated ability to design resilient software components within a distributed system.
  
  

Nice to have:

• Familiarity with Python Flask and/or FastAPI frameworks.
• Experience developing in C.
• Domain knowledge in Payment Systems or financial tech.
  
  

At IEM, we’re not just building innovative electrical distribution systems, we’re shaping the future. IEM is dedicated to delivering world-class solutions for complex power needs. After 75 years, we continue to push the boundaries of what’s possible. Whether you’re an experienced professional or just starting out, you’ll have the opportunity to contribute, grow, and make a lasting impact on industries that power the world’s most dynamic markets.

IEM is currently seeking a Quality Systems Technician for our Jacksonville FL. locations and will report into the Quality Systems Leader. The Quality Systems Technician plays a key role in supporting the development, implementation, and maintenance of digital quality systems, smart tools, and quality infrastructure. Reporting to the Lead Quality Systems Engineer, this role focuses on setting up systems, troubleshooting technical issues, and enabling the smooth integration of quality processes within manufacturing operations.

Please note: This position requires 100% in-office presence in our Jacksonville offices and does not offer remote work.

Key Responsibilities:

• Support the setup, configuration, and validation of quality systems, including smart tools, AI cameras, and digital inspection devices.
• Assist in troubleshooting issues related to EQMS platforms, smart inspection systems, and quality data capture tools.
• Work with engineering, IT, and quality teams to integrate new tools and systems into production processes.
• Help build and maintain process flows, control plans, and digital documentation related to quality system infrastructure.
• Support the digitization, automation, and standardization of quality and traceability records, including inspection data, testing logs, serialization records, and process verification checkpoints.
• Contribute to the creation and refinement of standard operating procedures (SOPs), work instructions, and user guides related to quality systems.
• Participate in pilot runs and process trials to validate functionality and integration of smart quality tools.
• Monitor system performance and escalate recurring issues or improvement opportunities.
• Maintain accurate documentation of setups, system changes, and configuration parameters.
• Provide technical support to shop floor users to ensure quality systems are functioning correctly.
• Assist in quality-related training sessions for new tools or systems implementation.
• Coordinate with vendors or suppliers when technical support or software updates are needed for system hardware or software.
• Perform other duties as needed to support the implementation and sustainability of quality system initiatives.
• Ability to develop & update programs and scripts for data validation, data sorting, automation, and creation of dashboards and visual reporting tools. 
• Familiarity with serialization, traceability systems, digital quality records, and manufacturing data management principles is strongly preferred.

Qualifications:

• Diploma or technical certification in Quality, Engineering Technology, Mechatronics, or a related technical field.
• 2+ years of experience in a manufacturing or engineering support role, preferably with exposure to quality or production systems.
• ⁠Experience with programming, scripting, or data visualization tools such as Python, SQL, VBA, or similar platforms is considered an asset.
• Familiarity with EQMS platforms, process automation, or smart inspection technologies is an asset.
• Strong troubleshooting and problem-solving skills in both hardware and software environments.
• Ability to read technical drawings, flowcharts, and system diagrams.
• Comfortable working in a cross-functional environment with engineering, IT, and operations teams.
• Proficient in Microsoft Office and experience with digital tools used in quality systems.
• Good communication skills and a detail-oriented mindset.
• Knowledge of lean manufacturing or six sigma principles is a plus.
• Demonstrated career ambition with a track record of growth and increasing responsibility; highly promotable with the potential to take on broader leadership roles within a fast-paced, high-growth organization 

Working Conditions:

• Split between office and shop floor environments.
• May require light hands-on work for system setup, testing, and troubleshooting.

Compensation actually offered for this role will take into account internal equity and also may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered. 

Position Summary

The Lead R&D Engineer is responsible for managing group engineers and leading the design and validation of new low voltage power distribution products. This role includes performing and overseeing complex projects that require extensive 3D modeling and 2D drafting while ensuring design accuracy and alignment with project requirements. The Lead R&D Engineer facilitates the development of innovative products that meet industry standards, regulatory requirements, and customer needs while optimizing performance, manufacturability, and cost. Additionally, the Lead R&D Engineer directly manages engineers and collaborates with the Engineering Manager to proactively identify and address project and personnel challenges, ensuring successful outcomes.

Key Responsibilities

•  Lead the design, analysis, and validation of new medium voltage power distribution products, including metal clad and metal enclosed switchgear, and related components.
• Responsible for managing and mentoring engineers and designers, providing career guidance, constructive feedback, tracking project timelines, and ensuring quality and efficiency in deliverables.
•  Working closely with the Engineering Manager to identify issues quickly and ensure they are addressed in an appropriate and timely manner.
•  Driving group on time performance while minimizing design errors for NPI project deliverables.
• Leading the development of mechanical designs to meet NPI project-specific requirements.
• Conducting peer reviews and providing constructive feedback to team engineers to improve design quality and ensure alignment with project goals.
•  Mentoring and supervising group engineers and designers to foster team growth and ensure efficient workflow in a collaborative environment.

New Process Implementation (NPI):

• Ensure NPI projects comply with customer specifications, industry standards, manufacturability, and internal quality benchmarks.
• Track project metrics such as TTM, design errors, and revision cycles to areas for improvement with the engineering manager.

Technical Leadership and Mentorship:

•  Foster a culture of innovation and continuous improvement within the team.
• Provide guidance and mentorship to team members, promoting professional growth.
• Resolve team conflicts to maintain a productive working environment.
• Assist in training team members in best practices for 3D SolidWorks modeling, 2D AutoCAD drafting, and compliance with design standards.
•  Provide constructive feedback during peer reviews to improve the team's technical output.

Collaboration and Support:

•  Facilitate communication between design and manufacturing teams to align processes.
• Establish a feedback loop with manufacturing engineers to optimize designs for manufacturability and to adjust design standards.
• Act as a point of contact for technical inquiries for the operations team.
• Facilitate communication and collaboration across multiple engineering and manufacturing sites to align expectations and processes.

Qualifications

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering or a related field, MSME is preferred.
•  10+ years of experience in R&D, product development, or a related field within the power distribution industry.
• Demonstrated track record of leading successful engineering projects and developing new technologies.
• Experience in medium voltage power distribution systems, including electrical, thermal, and mechanical considerations.
• Experience in leadership and mentoring and fostering a culture of innovation and continuous improvement.
• Experience working in a design-to-order or custom engineering environment is strongly preferred.
• Ability to manage multiple projects and prioritize tasks effectively in a fast-paced environment.
• Familiarity with low voltage switchgear, panelboards, utility systems, or the power industry is preferred.
• Proficiency in sheet metal design, including manufacturability and cost optimization.
• Strong attention to detail, analytical thinking, and problem-solving abilities.
•  Proficiency with SolidWorks, AutoCAD, or similar; CFD (Computer Fluid Dynamics) or Finite Element Analysis (FEA) experience is a plus.
• Knowledge of IEEE/ANSI C37.20.2, C37.04, C37.06, C37.09; CSA C22.2 No. 31-M89; EEMAC G8-3.2 design guidelines and NFPA70E are desirable.
• Strong communication skills, both written and verbal, with the ability to collaborate across teams.

Location

This position is available in multiple locations, including Franklin (TN), Tualatin (OR), OR Jacksonville (FL).

Position Summary

The Lead R&D Engineer is responsible for managing group engineers and leading the design and validation of new low voltage power distribution products. This role includes performing and overseeing complex projects that require extensive 3D modeling and 2D drafting while ensuring design accuracy and alignment with project requirements. The Lead R&D Engineer facilitates the development of innovative products that meet industry standards, regulatory requirements, and customer needs while optimizing performance, manufacturability, and cost. Additionally, the Lead R&D Engineer directly manages engineers and collaborates with the Engineering Manager to proactively identify and address project and personnel challenges, ensuring successful outcomes.

Key Responsibilities

•  Lead the design, analysis, and validation of new medium voltage power distribution products, including metal clad and metal enclosed switchgear, and related components.
• Responsible for managing and mentoring engineers and designers, providing career guidance, constructive feedback, tracking project timelines, and ensuring quality and efficiency in deliverables.
•  Working closely with the Engineering Manager to identify issues quickly and ensure they are addressed in an appropriate and timely manner.
•  Driving group on time performance while minimizing design errors for NPI project deliverables.
• Leading the development of mechanical designs to meet NPI project-specific requirements.
• Conducting peer reviews and providing constructive feedback to team engineers to improve design quality and ensure alignment with project goals.
•  Mentoring and supervising group engineers and designers to foster team growth and ensure efficient workflow in a collaborative environment.

New Process Implementation (NPI):

• Ensure NPI projects comply with customer specifications, industry standards, manufacturability, and internal quality benchmarks.
• Track project metrics such as TTM, design errors, and revision cycles to areas for improvement with the engineering manager.

Technical Leadership and Mentorship:

•  Foster a culture of innovation and continuous improvement within the team.
• Provide guidance and mentorship to team members, promoting professional growth.
• Resolve team conflicts to maintain a productive working environment.
• Assist in training team members in best practices for 3D SolidWorks modeling, 2D AutoCAD drafting, and compliance with design standards.
•  Provide constructive feedback during peer reviews to improve the team's technical output.

Collaboration and Support:

•  Facilitate communication between design and manufacturing teams to align processes.
• Establish a feedback loop with manufacturing engineers to optimize designs for manufacturability and to adjust design standards.
• Act as a point of contact for technical inquiries for the operations team.
• Facilitate communication and collaboration across multiple engineering and manufacturing sites to align expectations and processes.

Qualifications

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering or a related field, MSME is preferred.
•  10+ years of experience in R&D, product development, or a related field within the power distribution industry.
• Demonstrated track record of leading successful engineering projects and developing new technologies.
• Experience in medium voltage power distribution systems, including electrical, thermal, and mechanical considerations.
• Experience in leadership and mentoring and fostering a culture of innovation and continuous improvement.
• Experience working in a design-to-order or custom engineering environment is strongly preferred.
• Ability to manage multiple projects and prioritize tasks effectively in a fast-paced environment.
• Familiarity with low voltage switchgear, panelboards, utility systems, or the power industry is preferred.
• Proficiency in sheet metal design, including manufacturability and cost optimization.
• Strong attention to detail, analytical thinking, and problem-solving abilities.
•  Proficiency with SolidWorks, AutoCAD, or similar; CFD (Computer Fluid Dynamics) or Finite Element Analysis (FEA) experience is a plus.
• Knowledge of IEEE/ANSI C37.20.2, C37.04, C37.06, C37.09; CSA C22.2 No. 31-M89; EEMAC G8-3.2 design guidelines and NFPA70E are desirable.
• Strong communication skills, both written and verbal, with the ability to collaborate across teams.

Location

This position is available in multiple locations, including Franklin (TN), Tualatin (OR), OR Jacksonville (FL).

Position Summary

The Lead R&D Engineer is responsible for managing group engineers and leading the design and validation of new low voltage power distribution products. This role includes performing and overseeing complex projects that require extensive 3D modeling and 2D drafting while ensuring design accuracy and alignment with project requirements. The Lead R&D Engineer facilitates the development of innovative products that meet industry standards, regulatory requirements, and customer needs while optimizing performance, manufacturability, and cost. Additionally, the Lead R&D Engineer directly manages engineers and collaborates with the Engineering Manager to proactively identify and address project and personnel challenges, ensuring successful outcomes.

Key Responsibilities

•  Lead the design, analysis, and validation of new medium voltage power distribution products, including metal clad and metal enclosed switchgear, and related components.
• Responsible for managing and mentoring engineers and designers, providing career guidance, constructive feedback, tracking project timelines, and ensuring quality and efficiency in deliverables.
•  Working closely with the Engineering Manager to identify issues quickly and ensure they are addressed in an appropriate and timely manner.
•  Driving group on time performance while minimizing design errors for NPI project deliverables.
• Leading the development of mechanical designs to meet NPI project-specific requirements.
• Conducting peer reviews and providing constructive feedback to team engineers to improve design quality and ensure alignment with project goals.
•  Mentoring and supervising group engineers and designers to foster team growth and ensure efficient workflow in a collaborative environment.

New Process Implementation (NPI):

• Ensure NPI projects comply with customer specifications, industry standards, manufacturability, and internal quality benchmarks.
• Track project metrics such as TTM, design errors, and revision cycles to areas for improvement with the engineering manager.

Technical Leadership and Mentorship:

•  Foster a culture of innovation and continuous improvement within the team.
• Provide guidance and mentorship to team members, promoting professional growth.
• Resolve team conflicts to maintain a productive working environment.
• Assist in training team members in best practices for 3D SolidWorks modeling, 2D AutoCAD drafting, and compliance with design standards.
•  Provide constructive feedback during peer reviews to improve the team's technical output.

Collaboration and Support:

•  Facilitate communication between design and manufacturing teams to align processes.
• Establish a feedback loop with manufacturing engineers to optimize designs for manufacturability and to adjust design standards.
• Act as a point of contact for technical inquiries for the operations team.
• Facilitate communication and collaboration across multiple engineering and manufacturing sites to align expectations and processes.

Qualifications

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering or a related field, MSME is preferred.
•  10+ years of experience in R&D, product development, or a related field within the power distribution industry.
• Demonstrated track record of leading successful engineering projects and developing new technologies.
• Experience in medium voltage power distribution systems, including electrical, thermal, and mechanical considerations.
• Experience in leadership and mentoring and fostering a culture of innovation and continuous improvement.
• Experience working in a design-to-order or custom engineering environment is strongly preferred.
• Ability to manage multiple projects and prioritize tasks effectively in a fast-paced environment.
• Familiarity with low voltage switchgear, panelboards, utility systems, or the power industry is preferred.
• Proficiency in sheet metal design, including manufacturability and cost optimization.
• Strong attention to detail, analytical thinking, and problem-solving abilities.
•  Proficiency with SolidWorks, AutoCAD, or similar; CFD (Computer Fluid Dynamics) or Finite Element Analysis (FEA) experience is a plus.
• Knowledge of IEEE/ANSI C37.20.2, C37.04, C37.06, C37.09; CSA C22.2 No. 31-M89; EEMAC G8-3.2 design guidelines and NFPA70E are desirable.
• Strong communication skills, both written and verbal, with the ability to collaborate across teams.

Location

This position is available in multiple locations, including Franklin (TN), Tualatin (OR), OR Jacksonville (FL).

Position Summary

The Lead R&D Engineer is responsible for managing group engineers and leading the design and validation of new medium voltage power distribution products. This role includes performing and overseeing complex projects that require extensive 3D modeling and 2D drafting while ensuring design accuracy and alignment with project requirements. The Lead R&D Engineer facilitates the development of innovative products that meet industry standards, regulatory requirements, and customer needs while optimizing performance, manufacturability, and cost. Additionally, the Lead R&D Engineer directly manages engineers and collaborates with the Engineering Manager to proactively identify and address project and personnel challenges, ensuring successful outcomes.

Key Responsibilities

•  Lead the design, analysis, and validation of new medium voltage power distribution products, including metal clad and metal enclosed switchgear, and related components.
•  Responsible for managing and mentoring engineers and designers, providing career guidance, constructive feedback, tracking project timelines, and ensuring quality and efficiency in deliverables.
•  Working closely with the Engineering Manager to identify issues quickly and ensure they are addressed in an appropriate and timely manner.
• Driving group on time performance while minimizing design errors for NPI project deliverables.
•  Leading the development of mechanical designs to meet NPI project-specific requirements.
• Conducting peer reviews and providing constructive feedback to team engineers to improve design quality and ensure alignment with project goals.
• Mentoring and supervising group engineers and designers to foster team growth and ensure efficient workflow in a collaborative environment.

New Process Implementation (NPI):

• Ensure NPI projects comply with customer specifications, industry standards, manufacturability, and internal quality benchmarks.
• Track project metrics such as TTM, design errors, and revision cycles to areas for improvement with the engineering manager.

Technical Leadership and Mentorship:

•  Foster a culture of innovation and continuous improvement within the team.
• Provide guidance and mentorship to team members, promoting professional growth.
• Resolve team conflicts to maintain a productive working environment.
• Assist in training team members in best practices for 3D SolidWorks modeling, 2D AutoCAD drafting, and compliance with design standards.
•  Provide constructive feedback during peer reviews to improve the team's technical output.

Collaboration and Support:

•  Facilitate communication between design and manufacturing teams to align processes.
•  Establish a feedback loop with manufacturing engineers to optimize designs for manufacturability and to adjust design standards.
• Act as a point of contact for technical inquiries for the operations team.
•  Facilitate communication and collaboration across multiple engineering and manufacturing sites to align expectations and processes.

Qualifications

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering or a related field, MSME is preferred.
•  10+ years of experience in R&D, product development, or a related field within the power distribution industry.
• Demonstrated track record of leading successful engineering projects and developing new technologies.
• Experience in medium voltage power distribution systems, including electrical, thermal, and mechanical considerations.
• Experience in leadership and mentoring and fostering a culture of innovation and continuous improvement.
• Experience working in a design-to-order or custom engineering environment is strongly preferred.
• Ability to manage multiple projects and prioritize tasks effectively in a fast-paced environment.
• Familiarity with low voltage switchgear, panelboards, utility systems, or the power industry is preferred.
• Proficiency in sheet metal design, including manufacturability and cost optimization.
• Strong attention to detail, analytical thinking, and problem-solving abilities.
•  Proficiency with SolidWorks, AutoCAD, or similar; CFD (Computer Fluid Dynamics) or Finite Element Analysis (FEA) experience is a plus.
• Knowledge of IEEE/ANSI C37.20.2, C37.04, C37.06, C37.09; CSA C22.2 No. 31-M89; EEMAC G8-3.2 design guidelines and NFPA70E are desirable.
• Strong communication skills, both written and verbal, with the ability to collaborate across teams.

Location

This position is available in multiple locations, including Franklin (TN), Tualatin (OR), Jacksonville (FL).

Position Summary:

IEM is currently seeking a Manufacturing Engineer for our Jacksonville, FL location and will report into the Senior Manager of Manufacturing Engineering. We are seeking a hands-on and detail-oriented Manufacturing Engineer with experience working in a medium to high-mix volume manufacturing environment. This role is responsible for driving process improvements, implementing standard work, and leading continuous improvement initiatives using structured problem-solving and Kaizen methodologies. The ideal candidate thrives in a fast-paced, team-oriented setting and has a passion for lean manufacturing and operational excellence.

Key Responsibilities:            

• Design, optimize, and implement manufacturing processes to improve quality, efficiency, and safety.
• Lead and participate in Kaizen events, root cause problem solving (8D, A3, DMAIC), and continuous improvement projects.
• Develop and maintain standard work instructions for production processes.
• Use data-driven analysis (SPC, Pareto, time studies) to identify and resolve process bottlenecks or defects.
• Collaborate with cross-functional teams including Quality, Operations, and Supply Chain to introduce new products and process changes.
• Support equipment selection, process validation, and layout optimization for lean flow.
• Lead PFMEA, control plans, and risk assessments for manufacturing processes.
• Ensure processes comply with quality, safety, and environmental standards.
• Train and mentor operators and technicians on process changes and lean tools.

Qualifications:

• Bachelor's degree in Mechanical, Industrial, or Manufacturing Engineering (or related technical field).
• 3–7 years of experience in a manufacturing or process engineering role. Proven experience with Kaizen, standard work, time studies, line balancing, material flow, and structured problem-solving tools (A3, 5-Why, Fishbone, PDCA, etc.).
• Strong working knowledge of Lean Manufacturing and/or Six Sigma principles.
• Experience with ERP/MES systems, engineering change control, and work instruction platforms.
• Demonstrated career ambition with a track record of growth and increasing responsibility; highly promotable with the potential to take on broader leadership roles within a fast-paced, high-growth organization
• Proficient in Microsoft Office and engineering tools such as AutoCAD, SolidWorks, or equivalent.
• Strong interpersonal, facilitation, and communication skills.

Preferred Qualifications:

• Lean/Six Sigma certification (Green Belt or higher).
• Experience in electrical equipment, assembly-based, or industrial manufacturing environments.
• Familiarity with ISO 9001 or related quality management systems.

IEM is currently seeking a Manufacturing Engineer – Metal Fabrication (E2) to support the commissioning, implementation, and optimization of metal fabrication manufacturing processes within our rapidly expanding switchgear operations. This intermediate-level role involves independent execution of equipment launches, training development, and process optimization activities.

Please note: This position requires 100% onsite presence in our Jacksonville sites and does not offer remote work. 

KEY RESPONSIBILITIES

• Support installation, commissioning, and validation of metal fabrication equipment (CNC punching, press brakes, welding, powder coating, wire processing, and busbar equipment)
• Coordinate with equipment vendors during setup, FAT/SAT, and production ramp-up
• Assist with manufacturing cell layout, material flow, and facility readiness
• Support operator and maintenance training during equipment launch
• Develop, evaluate, and improve manufacturing methods, utilizing knowledge of product design, materials and parts, fabrication processes, tooling and production equipment capabilities, and quality control standards
• Apply lean manufacturing principles to improve safety, ergonomics, and process stability
• Implement and maintain OEE systems to track and improve machine efficiency
• Analyze incidents and quality issues, define and implement corrective actions
• Participate in automation initiatives by employing robotic manufacturing, material handling, and inspection.
• Implement preventative maintenance programs to reduce machine down times.
• Develop standard work, SOPs, and training materials for operators and technicians
• Collaborate with operations, quality, supply chain, facilities, and EHS teams
• Occasional travel to vendors or other IEM facilities as required

QUALIFICATIONS

Required:

• Bachelor’s degree in mechanical, manufacturing, or industrial engineering, or related technical field
• Must have knowledge of CNC machines, metal forming, fabrication processes, and their requirements.
• Minimum 3-year experience in a related manufacturing environment.
• Experience in 3D CAD/CAM Software (Solidworks preferred)
• Competency in GD&T required
• Strong communication skills and ability to work in an on-site production environment
• Excellent problem-solving skills and analytical thinking ability

Preferred:

• Exposure to equipment commissioning or production ramp-up
• Familiarity with Lean manufacturing tools (OEE, SPC, etc.)
• Experience working with CNC equipment OEMs such as Amada or similar
• Ability to manage multiple projects and assignments with high level of autonomy and accountability for results
• Knowledge of machinery design

We are seeking a Manufacturing Engineer - Early Career (E1) to support the commissioning, implementation, and optimization of metal fabrication manufacturing processes within our switchgear operations. This entry-level role focuses on supporting equipment commissioning, training, and early-stage process development under guidance from senior engineers.

Please note: This position requires 100% onsite presence in our Jacksonville sites and does not offer remote work. 

KEY RESPONSIBILITIES

• Support installation, commissioning, and validation of metal fabrication equipment (CNC punching, press brakes, welding, powder coating, wire processing, and busbar equipment)
• Coordinate with equipment vendors during setup, FAT/SAT, and production ramp-up
• Assist with manufacturing cell layout, material flow, and facility readiness
• Develop standard work, SOPs, and training materials for operators and technicians
• Support operator and maintenance training during equipment launch
• Analyze production data to identify opportunities for efficiency, quality, and throughput improvements
• Apply Lean manufacturing principles to improve safety, ergonomics, and process stability
• Collaborate with Operations, Quality, Supply Chain, Facilities, and EHS teams
• Support future equipment procurement, expansion, and optimization initiatives
• Occasional travel to vendors or other IEM facilities as required

QUALIFICATIONS

Required:

• Bachelor’s degree in mechanical, manufacturing, or industrial engineering, or related technical field
• Experience in a manufacturing or process engineering environment
• Experience in 3D CAD/CAM Software (Solidworks preferred)
• Strong communication skills and ability to work in an on-site production environment
• Excellent problem-solving skills and analytical thinking ability

Preferred:

• Experience with metal fabrication processes and equipment
• Exposure to equipment commissioning or production ramp-up
• Familiarity with Lean manufacturing tools

Experience working with CNC equipment OEMs such as Amada or similar

IEM is currently seeking a Quality Engineer - Customer Account Manager for our Jacksonville, FL or Surrey, B.C offices and will report into the VP of Quality & Reliability. As a Quality Engineer – Customer Account Manager, you will be the primary point of contact for the Customer and Commercial Teams about quality-related issues. Collect root cause analysis data and provide corrective feedback due to quality issues. Responsible for ensuring that the products produced meet quality standards required to minimize quality costs and maximize customer satisfaction whilst ensuring that procedures and processes are adhered to. Ensure incoming materials meet required quality standards. Support new product introductions to ensure the robustness of product. Work in a team environment to develop and implement best practices that emphasize defect prevention, reduction in variation and waste and provide for continuous improvements in meeting all customer requirements. Manage the customer specific requirements and coordinate technical support. Work on many phases or sub-tasks of projects or entire projects of moderate complexity, with results impacting on project completion. Work mostly independently under general supervision, reviewed at project milestones and/or on completion by Senior Management.

Please note: This position requires 100% in-office presence and does not offer remote work.

Key Responsibilities:

• Build strong, working relationships with customer and in-house commercial teams to ensure complete and transparent communication and support.
• Coordinate activities to evaluate and resolve sometimes technically challenging engineering and quality-related problems encountered in the customer’s facility
• Determine and collect relevant data for product and installation improvements to understand any problems and decide when to appropriately escalate issues
• Investigate reports of defective, damaged or malfunctioning parts, assemblies, equipment or systems to determine nature and scope of problem that the customer is experiencing
• Initiate containment of stock at all locations and prevent further nonconforming production
• Investigate the fault and extent of potential recall
• Examine defective part for conformance to engineering design drawings or specifications
• Identify anomalies on engineering drawings back to the design function
• Maintain records to oversee recording of information by others to ensure engineering drawings and documents are current and that engineering related production problems and resolutions are documented
• Provide feedback to company on what the issues are
• Evaluate findings to formulate corrective action plan and coordinate implementation
• Control clean cut-offs throughout and ensure containment is managed while on-going corrective actions are implemented
• Organize any re-work of finished goods that may be necessary
• Report into the customer what the root causes were to quality issues, the containment measures and corrective actions taken to ensure resolution
• Review engineering specifications, orders and related information to maintain current knowledge of manufacturing methods, procedures and activities
• Assist with training of quality awareness
• Monitor and report on Key Performance Indicators (KPIs) in order to adhere to process and prevent occurrence of any non-conformity relating to product, process or system
• Assist with new product introduction, representing the customer and support and manage pre-production trial runs and first off sample approvals
• Promote the use of customer preferred techniques for continuous improvement such as Six-Sigma, Poka-Yoke (Error Proofing), Kaizen
• Participate in the development and refinement of Design and Process FMEA’s (Failure Mode and Effects Analysis) and represent the customer’s views
• Manage and coordinate customer PPM, DO, DPU, cost recovery and supplier warranty indicators
• Keep up with current and developing manufacturing and engineering trends that concern the customer’s product
• Contribute to continuous improvement activities
• Quality control of work by appropriate reviews
• Support and lead process improvement activities
• Write reports and present progress at project meetings and to clients
• Plan projects or subtasks so they may be tracked and presented
• Perform root cause analysis and resolve problems
• Provide advice and guidance to management teams as required
• Provide support to all internal departments to maintain and improve product quality
• Communicate efficiently with IEM and customer’s management
• Liaise and communicate with other departments, customers, and other service providers
• Participate in cross-functional teams in the development of new products or changes related to current products in meeting customer requirements
• Develop quality relationships with the customer
• Comply with the Health, Safety and Environmental Policies both in-house and at the customer
• The candidate will be expected to perform additional duties as assigned to support the team and organization

Qualifications:

• Bachelor's in Business/Commercial or Manufacturing/Engineering degree preferred
• Minimum of 5 years of experience in Quality Assurance
• Demonstrated experience of 3 to 5 years in engaging with customers and suppliers
• Previous experience in a manufacturing environment
• Ability to work independently with minimal supervision
• Proficient in 8D, CARs, and quality systems
• Knowledgeable in Lean Manufacturing, APQP, PPAP, FMEA
• Familiarity with ISO9001
• Understanding of engineering drawings and manufacturing processes
• Adaptability to diverse and dynamic environments
• Strong planning and prioritization skills
• Effective communication, negotiation, and presentation abilities
• Proficient problem-solving skills
• Understanding of Health and Safety practices
• Team player with analytical skills
• Awareness of cost and financial impacts
• Commercial and financial awareness is advantageous
• Understanding of customer expectations and of quality failure/cost
• Demonstrated career ambition with a track record of growth and increasing responsibility; highly promotable with the potential to take on broader leadership roles within a fast-paced, high-growth organization

Compensation actually offered for this role will take into account internal equity and also may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered. 

[Surrey, B.C. Compensation Range: CAD 34.62/hr - 56.25/hr] 
[Jacksonville, FL Compensation Range: $85,000 - 125,000] 

Position Summary

The R&D Mechanical Engineer (Level I- Sr.) is responsible for collaborating or leading the design, testing and certification of innovative electrical power products in collaboration with a diverse team of electrical, mechanical and manufacturing engineers. This role requires a strong intuition of fundamental engineering concepts across multiple disciplines and an ability to effectively manage the product development process under limited direction.

Key Responsibilities

• Ensure the execution and implementation of the New Product Introduction (NPI) engineering work for assigned projects.
• Collaborate with Senior and Lead Engineers in writing detailed engineering specifications and developing concept drawings in collaboration with Sales and other stakeholders.
• Coordinate with Nationally Recognized Testing Laboratories (NRTLs) to define product evaluation and certification scope.
• Lead the creation of detailed design drawings, 3D models and bills of material for prototype equipment and test articles.
• Develop and document test plans according to the relevant standards. Common tests include full-load temperature rise, dielectric and BIL, short-circuit and withstand current, mechanical endurance, component failure, environmental, functional and seismic shake-table tests.
• Support the testing process at in-house and third-party laboratories. Travel up to 20% to support testing and other product development tasks in-person. Evaluate test results and revise designs based on empirical data and established engineering concepts.
• Characterize the electrical, thermal and mechanical performance of common design elements through testing, simulation and/or analytical methods. Develop standard design criteria and models.
• Work closely with manufacturing engineering to implement Design for Manufacturability (DFM) concepts throughout the new product development process.
• Working with Mechanical Designers,
• Conduct failure analyses of existing products and identify opportunities for continuous improvement

Qualifications

• Minimum 3 years of experience designing low and/or medium voltage power distribution equipment or related products.
• BSME or equivalent in experience.
• Experience with NRTL (UL, CSA, etc.) evaluation, testing and certification processes.
• Experience with common standards for electrical equipment (UL 891, 1558, 508A; IEEE C37.20, etc.)
• Design Experience using SolidWorks to produce 3D models is highly preferred.

Position Summary

The R&D Mechanical Engineer (Level I- Sr.) is responsible for collaborating or leading the design, testing and certification of innovative electrical power products in collaboration with a diverse team of electrical, mechanical and manufacturing engineers. This role requires a strong intuition of fundamental engineering concepts across multiple disciplines and an ability to effectively manage the product development process under limited direction.

Key Responsibilities

• Ensure the execution and implementation of the New Product Introduction (NPI) engineering work for assigned projects.
• Collaborate with Senior and Lead Engineers in writing detailed engineering specifications and developing concept drawings in collaboration with Sales and other stakeholders.
• Coordinate with Nationally Recognized Testing Laboratories (NRTLs) to define product evaluation and certification scope.
• Lead the creation of detailed design drawings, 3D models and bills of material for prototype equipment and test articles.
• Develop and document test plans according to the relevant standards. Common tests include full-load temperature rise, dielectric and BIL, short-circuit and withstand current, mechanical endurance, component failure, environmental, functional and seismic shake-table tests.
• Support the testing process at in-house and third-party laboratories. Travel up to 20% to support testing and other product development tasks in-person. Evaluate test results and revise designs based on empirical data and established engineering concepts.
• Characterize the electrical, thermal and mechanical performance of common design elements through testing, simulation and/or analytical methods. Develop standard design criteria and models.
• Work closely with manufacturing engineering to implement Design for Manufacturability (DFM) concepts throughout the new product development process.
• Working with Mechanical Designers,
• Conduct failure analyses of existing products and identify opportunities for continuous improvement

Qualifications

• Minimum 3 years of experience designing low and/or medium voltage power distribution equipment or related products.
• BSME or equivalent in experience.
• Experience with NRTL (UL, CSA, etc.) evaluation, testing and certification processes.
• Experience with common standards for electrical equipment (UL 891, 1558, 508A; IEEE C37.20, etc.)
• Design Experience using SolidWorks to produce 3D models is highly preferred.

Position Summary

The R&D Mechanical Engineer (Level I- Sr.) is responsible for collaborating or leading the design, testing and certification of innovative electrical power products in collaboration with a diverse team of electrical, mechanical and manufacturing engineers. This role requires a strong intuition of fundamental engineering concepts across multiple disciplines and an ability to effectively manage the product development process under limited direction.

Key Responsibilities

• Ensure the execution and implementation of the New Product Introduction (NPI) engineering work for assigned projects.
• Collaborate with Senior and Lead Engineers in writing detailed engineering specifications and developing concept drawings in collaboration with Sales and other stakeholders.
• Coordinate with Nationally Recognized Testing Laboratories (NRTLs) to define product evaluation and certification scope.
• Lead the creation of detailed design drawings, 3D models and bills of material for prototype equipment and test articles.
• Develop and document test plans according to the relevant standards. Common tests include full-load temperature rise, dielectric and BIL, short-circuit and withstand current, mechanical endurance, component failure, environmental, functional and seismic shake-table tests.
• Support the testing process at in-house and third-party laboratories. Travel up to 20% to support testing and other product development tasks in-person. Evaluate test results and revise designs based on empirical data and established engineering concepts.
• Characterize the electrical, thermal and mechanical performance of common design elements through testing, simulation and/or analytical methods. Develop standard design criteria and models.
• Work closely with manufacturing engineering to implement Design for Manufacturability (DFM) concepts throughout the new product development process.
• Working with Mechanical Designers,
• Conduct failure analyses of existing products and identify opportunities for continuous improvement

Qualifications

• Minimum 3 years of experience designing low and/or medium voltage power distribution equipment or related products.
• BSME or equivalent in experience.
• Experience with NRTL (UL, CSA, etc.) evaluation, testing and certification processes.
• Experience with common standards for electrical equipment (UL 891, 1558, 508A; IEEE C37.20, etc.)
• Design Experience using SolidWorks to produce 3D models is highly preferred.

At IEM, we’re not just growing – we're thriving! Our rapid expansion means new opportunities are always on the horizon. If you’re someone who gets excited by making an impact through interesting challenges, you’ll feel right at home. IEM is currently seeking a Senior Continuous Improvement Engineer for our Jacksonville, FL locations and will report into our Continuous Improvement Manager. Join our transformation journey as a lean professional supporting kaizen activities, standard work documentation, and data-driven process improvement. This is a hands-on role ideal for candidates with a passion for lean manufacturing and a desire to grow in a structured CI environment. 

Please note: This position requires 100% in-office presence in our Jacksonville offices and does not offer remote work. 

Key Responsibilities:  

• Plan & lead cross-functional kaizen events focused on lean fundamentals, standard work, visual management, flow, problem-solving and strategic growth/ capacity initiatives
• Drive the implementation of tools and processes across operations, supply chain, engineering, and commercial functions 
• Develop internal capability by training and coaching team members/ leaders in lean thinking, daily management and continuous improvement practice
• Create and execute improvement roadmaps based on assessments of the business system maturity  
• Enable teams to embrace standardization, accountability, and data-driven decision making
• Identify, document and disseminate internal best practices 
• Will be expected to perform additional duties as assigned

 Qualifications:  

• Bachelor’s degree in Engineering, Business, Operations, or a related field; MBA or Master’s preferred
• 7–10+ years of progressive experience in a manufacturing, operations, or continuous improvement, preferably in a multi-site or matrixed industrial environment
• Proven understanding of Lean Principles (e.g., 5S, value stream mapping, standard work, visual management, PDCA, SMED, A3 problem solving)
• Demonstrated success leading cross-functional kaizen events and system-wide CI initiatives
• Proven understanding of basic ops finance, including P&L impact, cost drivers, and fixed vs. variable costs
• Strong leadership, communication, and project management skills, with a track record of cross-functional collaboration and mentoring junior engineers
• Demonstrated career ambition with a track record of growth and increasing responsibility; highly promotable with the potential to take on broader leadership roles within a fast-paced, high-growth organization 

Compensation actually offered for this role will take into account internal equity and also may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered. 

Position Summary:

IEM is currently seeking a Manufacturing Engineer (Senior-level) for our Jacksonville, FL location and will report into the Senior Manager of Manufacturing Engineering. The Manufacturing Engineer (Senior-level) is a key technical leader responsible for driving strategic initiatives and delivering robust, scalable, and cost-effective manufacturing solutions. This role oversees the development, optimization, and support of advanced manufacturing processes, with a focus on operational excellence, automation, and continuous improvement. The Manufacturing Engineer (Senior-level) will lead cross-functional efforts to implement cutting-edge technologies, ensure regulatory compliance, and achieve world-class performance in quality, safety, and throughput. This position demands deep expertise in Lean, Six Sigma, process validation, and smart manufacturing systems, as well as strong leadership and mentoring capabilities.

Key Responsibilities:

• Lead the design, development, and deployment of advanced manufacturing processes and production systems across new and existing product lines.
• Drive automation and Industry 4.0 initiatives to enable smart, data-driven manufacturing and improve operational agility.
• Serve as the technical authority in cross-functional teams involving operations, quality, R&D, and supply chain to ensure product manufacturability, scalability, and cost-effectiveness.
• Facilitate and lead high-impact kaizen events, root cause investigations (RCA), and the implementation of corrective/preventive actions (CAPA).
• Develop and maintain comprehensive documentation including process flow diagrams, SOPs, work instructions, and training guides to ensure consistency and compliance.
• Optimize production line layouts, material flow, and takt time using Lean methodologies to increase efficiency and reduce waste.
• Own and drive continuous improvement of key performance indicators (KPIs) such as yield, cycle time, scrap rate, and OEE (Overall Equipment Effectiveness).
• Lead capital project initiatives including equipment selection, procurement, commissioning, and validation (IQ/OQ/PQ).
• Ensure all processes and equipment meet applicable safety, quality, and regulatory standards (e.g., ISO, UL, OSHA, FDA as applicable).
• Champion cost reduction strategies through design for manufacturability (DFM), value engineering, and process automation.
  
  Qualifications:
• Bachelor’s degree in Mechanical, Industrial, or Manufacturing Engineering; Master’s degree or advanced technical certifications (e.g., Lean Six Sigma Black Belt) strongly preferred.
• 7–10+ years of progressive experience in a manufacturing engineering role, ideally within high-volume or complex electromechanical production environments.
• Proven expertise in Lean Manufacturing, Six Sigma, Standard Work, process mapping, and statistical process control (SPC).
• Proficient with CAD software, ERP systems, and manufacturing execution systems (MES); experience with digital manufacturing tools and data analytics is a plus.
• Demonstrated hands-on experience with automation systems, robotics, PLCs, machine vision, or other Industry 4.0 technologies.
• Strong leadership, communication, and project management skills, with a track record of cross-functional collaboration and mentoring junior engineers.
• Demonstrated career ambition with a track record of growth and increasing responsibility; highly promotable with the potential to take on broader leadership roles within a fast-paced, high-growth organization
• Strategic thinker with a continuous improvement mindset and a passion for driving operational excellence.

Switchgear Applications Engineer 

Location: Jacksonville, FL 

Reports To: Technical Program Manager

Salary Range:  $100,000 - $150,000 Annually

Position Summary 

As the Technical Program Application Engineer with the Commercial Enterprise team, you will report to the Technical Program Manager and work closely with both the commercial and engineering teams.

In this role, you will serve as the key technical review and product point person, ensuring the accuracy and completeness of clean orders.

Key Responsibilities 

• Review customer plans and specs for use in the RFQ and Order Entry stages, raising any discrepancies with customers through RFI process,
• Review and redline drawings, suggesting solutions or alternate designs where applicable, to ensure alignment with customer specifications and electrical regulatory body standards, for various regions.
• Respond to external RFIs in accordance with Service Level Agreements.
• Provide detailed scope of customer change requests, submit change notices and follow-up to completion and/or escalate if changes may impact beyond a specific deployment.
• Support post-delivery RFIs through customer/IEM Procore with timely responses and coordinate internal intercept plans where needed.
• Create customer specific content for technical manuals and documentation, provide revisions for new design iterations.
• Provide detailed responses to customers’ design engineering submittal feedback in accordance with Service Level Agreements.
• Proactively interact with clients, vendors and internal teams (sales, field service, commercial, project managers, internal engineering, etc.) to gather information, and resolve issues.
• Communicate effectively with internal partners and customers, industry contacts (where required), in a timely and professional manner. Ensure all affected departments are well informed and provided with timely updates to open projects/concerns.
• Provide regular progress reports on assignments, identifying areas of improvement and/or successes.
• Other duties as assigned.
• Occasional travel is required.

 Qualifications 

• Bachelor’s degree in electrical engineering.
• 5+ years experience with the application of electrical distribution products and systems.
• Knowledge and experience in evaluating complex single line diagrams (SLDs) and communication network diagrams, including media and protocols.
• Strong technical aptitude and analytical skills, with the ability to interpret technical product specifications and applications.
• Familiarity with ANSI, IEEE, UL, and CSA standards for low-voltage power distribution equipment.
• Proficient in both written and spoken English.
• Excellent communication and employee relations skills.
• Enthusiasm for learning and growth; proactively identifies opportunities and takes initiative to resolve issues.
• A problem-solving mindset and the ability to approach challenges constructively.
• Demonstrated ability to manage multiple concurrent deliverables and perform effectively in a dynamic, fast-paced environment.
• Proficiency with MS Office 365, Adobe/Bluebeam, AutoCAD, business intelligence software (e.g., Tableau, Power BI), and ERP systems (experience with Infor is considered an asset

Compensation actually offered for this role will take into account internal equity and also may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.

The mission of Speechify is to make sure that reading is never a barrier to learning.

Over 50 million people use Speechify’s text-to-speech products to turn whatever they’re reading – PDFs, books, Google Docs, news articles, websites – into audio, so they can read faster, read more, and remember more. Speechify’s text-to-speech reading products include its iOS app, Android App, Mac App, Chrome Extension, and Web App. Google recently named Speechify the Chrome Extension of the Year and Apple named Speechify its App of the Day.

Today, nearly 200 people around the globe work on Speechify in a 100% distributed setting – Speechify has no office. These include frontend and backend engineers, AI research scientists, and others from Amazon, Microsoft, and Google, leading PhD programs like Stanford, high growth startups like Stripe, Vercel, Bolt, and many founders of their own companies.

Overview

With the growth of our iOS app, being the #18 productivity app in the App Store category and also our recent recognition as Apple's 2025 Design Award for Inclusivity, we find the need for a Senior iOS Engineer to help us support the new user base as well as work on new and exciting projects to push our missing forward.   

This is a key role and ideal for someone who thinks strategically, enjoys fast-paced environments, passionate about making product decisions, and has experience building great user experiences that delight users.

We are a flat organization that allows anyone to become a leader by showing excellent technical skills and delivering results consistently and fast. Work ethic, solid communication skills, and obsession with winning are paramount. 

Our interview process involves several technical interviews and we aim to complete them within 1 week. 

What You’ll Do

• Opportunity to lead key engineering and product decisions
• Actively shipping production code for the Speechify iOS app
• Work within a dedicated product team
• Participate in product discussions to shape the product roadmap
• Maintain and enhance the existing complex app architecture

An Ideal Candidate Should Have

• Experience. You've worked on products that scaled to a large user base
• Track record. You have worked on various products from inception to decent traction. You have been responsible for engineering the product
• Customer obsession. We expect every team member whose responsibilities directly impact customers to be constantly obsessed about providing the best possible experience
• Product thinking. You make thoughtful decisions about the evolution of your product and support internal teams and designers into taking the right direction
• Speed. You work quickly to generate ideas and know how to decide which things can ship now and what things need time
• Focus. We’re a high-growth startup with a busy, remote team. You know how and when to engage or be heads down
• Technical skills. Swift, SwiftUI

Technical Requirements:

• Swift Programming Language
• SwiftUI experience
• Experience in Multithreading Programming
• Working with CI/CD infrastructure
• Experience with Fastlane
• SOLID principles, the ability to write every single class according to SOLID
• Experience with Git and understanding of different Git strategies

What We offer:

• A fast-growing environment where you can help shape the company and product
• An entrepreneurial crew that supports risk, intuition, and hustle
• The opportunity to make a big impact in a transformative industry
• A competitive salary, a collegiate atmosphere, and a commitment to building a great asynchronous culture
• Work on a product that millions of people use and where daily feedback includes users sharing that they cried when they first found the product because it was so impactful on their lives
• Support people with learning differences like Dyslexia, ADD, Low Vision, Concussions, Autism, and Second Language Learners, and give reading superpowers to professionals all over the world
• Work in one of the fastest growing sectors of tech: Intersection of Artificial Intelligence and Audio 

The United States Based Salary range for this role is: 140,000-200,000 USD/Year + Bonus + Stock depending on experience

Think you’re a good fit for this job? 

Tell us more about yourself and why you're interested in the role when you apply.
And don’t forget to include links to your portfolio and LinkedIn.

Not looking but know someone who would make a great fit? 

Refer them! 

Speechify is committed to a diverse and inclusive workplace.

Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Who we are

“Welcoming”, “Collaborative” and “Having the opportunity to make an impact” - is how our employees describe working here.  Galileo is a financial-technology company that provides innovative and revolutionary software products and services that power some of the world's largest Fintechs. We are the only payments innovator that applies tech and engineering capabilities to empower Fintechs and financial institutions to unleash their full creativity to achieve their most inspired goals. Galileo leads its industry with superior fraud detection, security, decision-making analytics and regulatory compliance functionality combined with customized, responsive and flexible programs to accelerate the success of all payments companies and solve tomorrow's payments challenges today. We hire energetic and creative employees while providing them the opportunity to excel in their careers and make a difference for our clients. Learn more about us and why we work here at www.galileo-ft.com. 

The role:

You will steward the 'building blocks' of modern fintech. Our APIs empower clients to build unique financial experiences, meaning your team's work directly powers the innovation of some of the world's largest fintechs.

What you’ll do:

• Build the Golden Path: Design and deliver reusable frameworks and shared infrastructure that help product squads ship secure, observable, and compliant services by default.
• Create Platform Abstractions: Identify repeated implementation patterns and turn them into modular platform components that reduce duplication and simplify service development.
• Improve Traceability and Observability: Drive adoption of common telemetry and request-correlation patterns so teams can troubleshoot and operate services more effectively.
• Advance Contract-First Development: Help make technical contracts the source of truth for service development, with tooling that keeps implementation, documentation, and schemas aligned.
• Raise the DX (Developer Experience) Bar: Build platform tools that teams adopt because they are faster, clearer, and easier to use than bespoke alternatives.
• Navigate Trade-offs Well: Make sound technical decisions that balance standardization, delivery speed, and the practical needs of individual teams.
• Partner Across Teams: Work closely with engineers, managers, and adjacent platform teams to align on patterns, priorities, and rollout plans.
• Mentor Through Practice: Coach engineers through design reviews, code review, docs, and shared implementation work; help maintain core platform libraries and support an innersource contribution model.

What you’ll need:

• Bachelor’s degree in Computer Science, a related technical field, or equivalent practical experience.
• Distributed Systems Experience: 8+ years of experience designing and scaling resilient software systems, ideally with strong Python experience.
• Platform Mindset: Experience building shared libraries, services, proxies, or frameworks used by internal engineering teams.
• Modern SDLC Depth: Hands-on experience with CI/CD, automated testing, schema validation, and production delivery pipelines.
• Cross-Team Influence: A track record of driving technical direction and gaining buy-in from peer teams and stakeholders without direct authority.
• Cloud & Kubernetes Experience: Strong experience with AWS and Kubernetes-based environments.
• Pragmatic Engineering Judgment: Ability to identify when a problem should be standardized, abstracted, or left local.

Nice to have:

• Framework Expertise: Familiarity with Python Flask and/or FastAPI frameworks.
• Infrastructure as Code: Experience with Terraform for delivering standardized infrastructure templates.
• API Governance: Familiarity with OpenAPI/Swagger standards and the governance of large-scale API catalogs.
• Observability & Identity Experience: Experience with distributed tracing, metric taxonomies, and service-to-service authentication (S2SA) patterns.
• FinTech Experience: Domain knowledge in payment systems or highly regulated financial technology environments.

The role:

• As a Senior Staff Software Engineer at Galileo, you will lead broad, impactful projects across multiple teams as one of the senior-most technical contributors. Your influence will span across teams, projects and locations, shaping both our technical direction as well as how our teams build and operate software systems.
• You will be hands-on and in the details as an exemplary practitioner for both the software we develop, as well as the tools and techniques we use to test, release and operate it. You will help teams evolve code-bases to ship improvements safely and frequently. As part of this, you will steward a broader engineering community and mentor others.
• You will proactively identify the problems to solve and advocate for the right organization priorities. This role is inherently cross-functional and you will work closely with engineering, product, risk, compliance, data, legal, and executive teams to define and execute on technical strategy. You’ll face and solve a wide range of challenges: technical, product, and operational, shaping your personal growth and career along the way.

What you’ll do:

• Own driving Galileo’s software architecture and systems forward, setting long term direction and executing on it across multiple teams and quarters.
• Build as an exemplary practitioner: you will get to be hands-on developing software, and set a high quality standard for teams to follow.
• Define the right boundaries, APIs, and integrations between our teams and with our clients and partners to set us up for technical and business success.
• Solve complex engineering problems endemic to high-availability, low-latency, scalable distributed systems.
• Execute large-scale projects, leading design, planning, and execution across multiple teams to drive technical directions and product outcomes.
• Proactively identify broader problems and opportunities. Anticipate and design the next generation of our systems and products.
• Raise the quality of our engineering teams: you will identify opportunities and advocate for improvements to the way we write software, our approach testing and quality, and shape the habits and processes of highly effective teams.
• Mentor and coach to individuals and teams across the company. Steward engineering communities, fostering design collaboration and mindshare.
• Articulate how technical architecture and team structure interact, provide input to the right organization structure to deliver on our engineer goals.
• Strategic advisor to leadership, representing technical strategy to business and executive stakeholders, and participating in strategic planning.
• Continuously drives improvement, new practices and operational excellence initiatives across the department (e.g. multiple groups).
• Raises the quality of department and products. Be able to stand up processes, mechanisms, or tools to improve engineering excellence, operations, and quality of our technology.
• Through a combination of working through others and their contribution, improves the department's systems by championing improvements in code, design, and operational reviews. Leads initiatives that improve department software quality and operations. Be a stakeholder in engineering norms and standards for code quality, software quality, and operational excellence for your department.

What you’ll need:

• 10+ years programming experience, mastery of software development independent of language (Ideally in Python)
• Advanced expertise in designing, building, and operating large-scale fault-tolerant distributed systems, applications, databases, and workflows.
• Demonstrated experience with continuous delivery principles and techniques: you’ve built systems with layered test automation that is always safe for automated releases to production, enabling a great, low-cycle time developer experience.
• A high standard for what “great” looks like, and experience continuously improving legacy systems to reach it.
• Strong judgment, experience recognizing and driving out critical decisions in a balanced and pragmatic way.
• Experience building systems with public cloud infrastructure, preferably AWS.
• Excellent verbal and written communication skills.
• Ability to lead and influence technical direction across multiple teams.
  
  

We are seeking a Civil Engineer EIT to join our growing team 

You will play a key role in supporting project teams by leading design aspects and addressing engineering issues across various projects. You will have the opportunity to develop and showcase your proficiency in civil engineering principles while collaborating closely with project managers, team members, and clients.

Responsibilities:

• Partner with project teams and clients to prepare project documents and proposals.
• Draft, review, and finalize project deliverables including:
  • Site plans
  • Engineering reports
  • Cost estimates
  • Project schedules
  • Permit applications
  • Due diligence reports
• Make edits and modifications to plans based on client and agency feedback.
• Research local/state zoning requirements for properties and projects.
• Conduct site visits and field assignments.
• Analyze site survey data and consider development factors.
• Utilize AutoCAD Civil 3D and related software to complete assignments efficiently and according to quality standards.
• Communicate effectively with clients, municipalities, and agencies under the direction of the Project Manager.
• Update Project Manager and Team Leader on workload status.
• Apply fundamental engineering concepts to practical situations.

Qualifications:

• Bachelor's degree in Civil Engineering.
• Two to four (2-4) years of experience in civil engineering, with experience leading design aspects of development projects preferred.
• Proficiency in AutoCAD Civil 3D, Grading Design, Technical Writing, 3-D Modeling, MS Office, and Plan Interpretation.
• Strong written and verbal communication skills.
• Excellent workload management skills.

Disclaimer 

While AI tools may support your application process, this role is built on human talent. Your judgment, experience, and character matter most, so we encourage you to showcase what makes you uniquely you.

Atwell does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any Atwell employee. Resumes from approved vendors must be specifically requested by Atwell and approved by the Atwell Talent Acquisition Team.

#LI-EB1

The mission of Speechify is to make sure that reading is never a barrier to learning.

Over 50 million people use Speechify’s text-to-speech products to turn whatever they’re reading – PDFs, books, Google Docs, news articles, websites – into audio, so they can read faster, read more, and remember more. Speechify’s text-to-speech reading products include its iOS app, Android App, Mac App, Chrome Extension, and Web App. Google recently named Speechify the Chrome Extension of the Year and Apple named Speechify its 2025 Design Award winner for Inclusivity.  

Today, nearly 200 people around the globe work on Speechify in a 100% distributed setting – Speechify has no office. These include frontend and backend engineers, AI research scientists, and others from Amazon, Microsoft, and Google, leading PhD programs like Stanford, high growth startups like Stripe, Vercel, Bolt, and many founders of their own companies.

Overview

The responsibilities of our Platform team include building and maintaining all backend services, including, but not limited to, payments, analytics, subscriptions, new products, text to speech, and external APIs.

This is a key role and ideal for someone who thinks strategically, enjoys fast-paced environments, is passionate about making product decisions, and has experience building great user experiences that delight users.

We are a flat organization that allows anyone to become a leader by showing excellent technical skills and delivering results consistently and fast. Work ethic, solid communication skills, and obsession with winning are paramount. 

Our interview process involves several technical interviews and we aim to complete them within 1 week. 

What You’ll Do

• Design, develop, and maintain robust APIs including public TTS API, internal APIs like Payment, Subscription, Auth and Consumption Tracking, ensuring they meet business and scalability requirements
• Oversee the full backend API landscape, enhancing and optimizing for performance and maintainability
• Collaborate on B2B solutions, focusing on customization and integration needs for enterprise clients
• Work closely with cross-functional teams to align backend architecture with overall product strategy and user experience

An Ideal Candidate Should Have

• Proven experience in backend development: TS/Node (required)
• Direct experience with GCP and knowledge of AWS, Azure, or other cloud providers
• Efficiency in ideation and implementation, prioritizing tasks based on urgency and impact
• Preferred: Experience with Docker and containerized deployments
• Preferred: Proficiency in deploying high availability applications on Kubernetes

What We Offer

• A dynamic environment where your contributions shape the company and its products
• A team that values innovation, intuition, and drive
• Autonomy, fostering focus and creativity
• The opportunity to have a significant impact in a revolutionary industry
• Competitive compensation, a welcoming atmosphere, and a commitment to an exceptional asynchronous work culture
• The privilege of working on a product that changes lives, particularly for those with learning differences like dyslexia, ADD, and more
• An active role at the intersection of artificial intelligence and audio – a rapidly evolving tech domain

The United States Based Salary range for this role is: 140,000-200,000 USD/Year + Bonus + Stock depending on experience

Think you’re a good fit for this job? 

Tell us more about yourself and why you're interested in the role when you apply.
And don’t forget to include links to your portfolio and LinkedIn.

Not looking but know someone who would make a great fit? 

Refer them! 

Speechify is committed to a diverse and inclusive workplace. 

Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Manager, Rapid Prototyping 

About Otto Aerospace  

OTTO is developing the world’s first fifth-generation business jet, designed for sustainability through the innovative use of advanced super-laminar aerodynamics and high-precision, net-shaped composites. Flight tests of our technology demonstrator validate a dramatic reduction in fuel burn and allow for a sizeable improvement in cabin comfort. Otto Aerospace is designing world-class aircraft from first principles of physics and delivering ground-breaking aircraft and economic performance.  

 About the Role  

Otto Aerospace is seeking a dynamic engineer to join our Aircraft Integration Team.  The ideal candidate will have a background in aerospace rapid prototyping, including managing small, dynamic teams, hands-on design, build, and assembly of mockups, prototypes, and test articles, utilizing 3D-printed, wooden, metallic, fiberglass, and carbon-fiber construction.  You will be joining a team developing the world’s most efficient aircraft. Otto Aerospace is seeking first-principles engineers who work well in a team atmosphere and know how to get things done. 

What You’ll Do 

• Be a functioning team member within Otto’s Aircraft Integration Team. 
• Manage a small team of rapid prototyping engineers 
• Develop workflow processes for mockups and test articles of various levels of complexity from various requestors 
• Lead the design, fabrication, and assembly of low-to-high fidelity aerospace prototypes, mockups, and test rigs both in and out of house 
• Select materials, components, and fabrication methods suitable for performance, cost, and build speed requirements 
• Translate concepts, ideas, and sketches into function hardware and test rigs. 
• Support design and fabrication of supplier on-site builds 
• Manage, mentor, and guide teammates through rapid prototyping builds 
• Hands on fabrication, build, and assembly 
• Document build processes, test results, and design iterations to support engineering and certification efforts. 
• Manage costs, schedules, and resources required for each build. 
• Ordering, purchasing, and retrieval of components and supplies. 
• Collaborate with engineering teams to ensure prototypes meet performance and integration requirements 
• Perform and participate in trade studies to influence key aircraft decisions. 
• Maintain a clean and safe working environment 

Who You Are 

Education 

• B.S. in Mechanical or Aerospace Engineering, or equivalent. 

Experience 

• Minimum 8 years rapid prototype experience, preferably in aerospace 
• Experience managing a small diverse team preferred. 
• Skills in CATIA V5/V6/3DX (or similar); 3DX is preferred. 
• Hands-on experience with shop tools and equipment including drills, saws, lathes, mills, welders, routers, etc. 
• Strong understanding of materials (plastics, woods, metals, composites), their uses, and manufacturing techniques. 
• Overall knowledge of mechanical systems, propulsion, structures, avionics, and key interfaces to aircraft systems common on Part 23 / Part 25 aircraft. 
• Strong knowledge of industry standards with hands-on experience. 
• Basic understanding of Product Lifecycle Management processes. 
• Familiarity with RTCA DO-160G, DO-254, and SAE ARP4754A. 
• Familiarity with FAR Part 23 and Part 25 requirements. 

Desired Experience 

• Electromechanical integration and test. 
• Understanding basic LV/HV wiring. 
• Logistics and shipping experience or understanding of logistics and shipping 

Interpersonal Skills 

• Active Listening: Practice gaining insight and understanding of all project stakeholders. 
• Critical Thinking: Make prompt, informed, and value-based decisions for the project. 
• Organization: Focus on agenda, schedules, frameworks, and methodologies, as well as communicating tasks, updates, progress, and blockers. 
• Problem Solving: Assess issues from different vantage points and formulate the best solution in addressing specific challenges. 
• Self-Motivation: Exude the highest level of commitment and motivation to see it through from start to finish. 
• Teamwork and Team Building: Establish a collaborative culture where people with unique personalities and skills happily work together and accountable to shared goals. 
• Strong Business Communication: Use the right language, tone and storytelling techniques when communicating, describing, or explaining issues over email, chat, reports, presentations and other forms and channels of communication. 
• Ability to work with domestic/international suppliers/partners effectively. 

Where You’ll Be 

**This position will work onsite at our temporary headquarters in Ft Worth, TX then move to onsite at our new location in Jacksonville, FL upon facility readiness 

Benefits  

Otto Aerospace provides a robust benefits package that includes competitive salaries, subsidized medical, dental, and vision coverage, 401(k) opportunities, paid short term disability, voluntary long-term disability and additional term life, with 15 paid days off, 13 paid company holidays, and paid sick leave. Depending on seniority and role, some roles qualify for potential bonuses and stock options.  

 Otto Aerospace is an Equal Opportunity Employer   

We are committed to diversity, equity, and inclusion in every aspect of our hiring process. All applicants will be considered for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability. We believe that a diverse team brings fresh perspectives, innovative ideas, and greater success. The more inclusive we are, the stronger we become. Applicants must be legally authorized to work in the U.S.  

#LI-Onsite 

Overview

The Contact Platform Engineer is a strategic technical lead focused on the evolution of SoFi’s omni-channel interaction stack. This role serves as the primary architect and data researcher for the member journey and may perform system configuration as needed.

The successful candidate will mine historical IVR and chat data to identify customer friction points and translate those insights into high-level blueprints. You will act as the bridge between Operations and Engineering, designing the "what" and "why" so that technical teams can execute the "how".

Expertise Breakdown

• Data Mining & Friction Analysis (40%): Identifying trends in IVR/Chat performance and agent-handled friction.
• Solutions Architecture & Blueprinting (40%): Designing the technical workflows and cross-functional requirements.
• Strategic Collaboration (20%): Partnering with Engineering and Ops to drive the roadmap.

Core Responsibilities

Insight Engineering & Data Mining (40%)

• Analyze historical IVR, chatbot, and transcript data to identify why members are failing to self-serve.
• Go beyond platform metrics to identify "friction-heavy" call/chat types that require high agent effort.
• Quantify the business impact of proposed enhancements using data-driven projections.
• Monitor post-launch performance to validate that designed blueprints achieved intended friction reduction.

Solutions Architecture & Blueprinting (40%)

• Translate identified operational gaps into comprehensive technical blueprints and interaction flows.
• Define the "Definition of Ready" for Engineering partners, including detailed requirements and logic maps.
• Conduct design sessions to ensure proposed solutions are scalable and aligned with enterprise standards.
• Front-end configuration on contact platforms, as needed.

Strategic Collaboration (20%)

• Lead cross-functional meetings with Product, Engineering, and Operations to align on project scope and needs.
• Act as the subject matter expert (SME) during the development lifecycle demonstrating product expertise to clarify architectural intent and product and member benefits.
• Maintain the long-term roadmap for contact platform enhancements based on emerging member needs.

Qualifications

• 5+ years of experience in systems architecture, business intelligence, or operations technology.
• Expert-level Analytical Skills: Proficiency in mining data from telephony or CCaaS platforms to find the "story" behind the metrics.
• Demonstrated Blueprinting Experience: Ability to create professional system diagrams and workflow logic for Engineering hand-offs.
• Strong Communication: Ability to "translate" between high-level business problems and deep technical requirements.
• Platform Knowledge: Familiarity with modern CCaaS/Chatbot capabilities is required to design effectively, though hands-on configuration is not part of this role.
• Preferred Bachelor degree or technical discipline or 5+ years of relative experience 
• Preferred contact analysis platform, voice bot, DataGrip, SQL & BI platforms

Xometry is seeking highly motivated Mechanical Engineers to act as customer-facing Technical Account Managers (TAMs). These TAMs will be embedded within our most strategic accounts, acting as an extension of their engineering teams. This role is a unique blend of customer engagement, technical expertise, and operational execution. TAMs will report into Operations but will work very closely with Sales to drive growth and ensure customer satisfaction.

This is a unique opportunity to join a dynamic and growing company at the forefront of digital manufacturing. If you are a highly motivated Mechanical Engineer with a passion for customer success and a desire to make a real impact this is the role for you.

Responsibilities:

Customer Integration:

• Become a trusted advisor and technical expert for assigned enterprise accounts
• Weekly onsite visits at customer and partner locations, building relationships and understanding their needs
• Collaborate closely with customer engineers on Design for Manufacturing (DFM) to optimize projects for Xometry's platform
• Proactively identify and address potential manufacturing challenges
• Stay informed about upcoming customer projects and initiatives to ensure alignment with Xometry's capabilities

Order Fulfillment and Quality:

• As customer projects are awarded to Xometry, ensure orders are directed to the most qualified manufacturers within our network
• Conduct monthly on-site audits of manufacturing partners to ensure they meet Xometry's quality standards and customer specifications
• Manage projects to successful completion, overseeing production, and ensuring on-time delivery
• Handle critical communications, order changes, and escalations related to customer orders
• Monitor customer-specific dashboards to track order progress, delivery metrics, and quality performance

Sales and Account Growth:

• Partner with Enterprise Sales Executives to drive account growth and retention
• Identify opportunities for expanding Xometry's services within existing accounts
• Provide technical expertise and support during the sales process
• Gather customer insights and feedback to inform sales strategies

Qualifications:

• Bachelor's degree in Mechanical Engineering or a closely related field such Aerospace Engineering, Product Design/Development, or Industrial Engineering is required
• 7+ years of experience in manufacturing, product development, and project management
• Experience in the aerospace industry is highly preferred
• Strong understanding of manufacturing processes and DFM principles, particularly as they apply to CNC applications
• Experience in CNC Machining, Tube Bending, Composites, or 3D printing is preferred
• Proficiency in modelling and drafting software such as Solidworks
• Excellent communication, interpersonal, and problem-solving skills
• Experience with CRM systems such as Salesforce
• Proficiency in Google Suite and Microsoft Office Suite
• Ability to travel to customer and partner sites up to 50%, travel could be short notice and range from short day trips to multi-day trips

#LI-Remote

About Otto Aerospace 

OTTO is developing the world’s first fifth-generation business jet, designed for sustainability through the innovative use of advanced super-laminar aerodynamics and high-precision, net-shaped composites. Flight tests of our technology demonstrator validate a dramatic reduction in fuel burn and allow a sizeable improvement in cabin comfort. Otto Aerospace is designing world-class aircraft from first principles physics and delivering ground-breaking aircraft and economic performance. 

About the Role 

The Lead Technical Program Manager (TPM), Engineering is responsible for the management of the program information on behalf of the Air Vehicle Engineering Definition. This role will lead a team of TPMs to coordinate and deliver products on schedule and within budget. The role will work within the Program Management Office (PMO) to enable the integration and development of the Air Vehicle and monitor overall program progress. 

What You'll Do 

• Serve as an execution leader on behalf of the Engineering organization, establishing clarity, stability, and accountability across product development plans 
• Own the orchestration of engineering execution across the full program lifecycle, partnering with TPMs and Engineering work package owners to define, align, and sequence activities from requirements & concept development through design, manufacturing, testing, qualification, certification, and transition to production 
• Support supplier strategy and execution 
• Partner closely with the Chief Engineer as a thought partner and execution counterpart, jointly managing risks, issues, and opportunities with program metrics and decision-ready visibility 
• Define and enforce the PMO execution operating model — goals, deliverables, cadence, tools, and behaviors — ensuring consistency, discipline, and accountability across teams. 
• Anticipate resource and execution stress points, proactively identifying gaps across work packages and guiding leadership discussions to resolve them before they impact delivery. 
• Lead alignment across a team of Engineering TPMs to synthesize project status, risks, and opportunities into clear narratives that enable decisive action at all levels of management 
• Steward the program roadmap, ensuring near-term execution remains aligned with long-term program strategy for Engineering and the business 

 Who You Are 

• Enterprise-Level Thinker: You see beyond individual projects to the system as a whole. You understand how decisions cascade across scope, schedule, budget, and technical outcomes, and you use that perspective to guide tradeoffs, align priorities, and keep the organization focused on what truly matters. 
   
• Owner and Steward: You don’t just manage work or people — you own outcomes. You know the numbers, forecasts, risks, and milestones cold, and you bring calm, confident decision-making to complex situations through preparation, precision, and accountability. 
   
• Execution Leader: You create forward motion. You set expectations, reinforce discipline, and ensure commitments turn into results. When alignment slips or execution slows, you step in decisively to restore clarity and momentum. 
   
• Connector & Translator: You ensure information flows cleanly across teams and levels. You translate complexity into shared understanding, close communication gaps, and help technical and non-technical stakeholders stay aligned without noise or drama. 
•  
• Steady under Fire: When conditions change, you provide perspective and stability. You adapt quickly without creating chaos, use data to guide judgment, and translate uncertainty into clear, actionable direction for the team. 

Who You Are 

Education 

• Bachelor’s degree in Aerospace, Mechanical, or Systems Engineering or other related field 

 Experience 

• A minimum of eight (8) years in technical program/project management role, preferably in the aviation industry 
• A minimum of ten (10) years of total experience (an equivalent combination of experience and education may be considered) 
• A minimum of two (2) years of experience in a formal or informal leadership position 
• Engineering experience throughout the product lifecycle, including composite materials and systems development and certification 
• Project management experience in complex aircraft structures development through design, testing, build, and qualification phases  
• Experience with MS Project, Primavera/P6, Jama, Jira and/or other project management tools 

 Required Skills 

• Demonstrated experience developing and implementing standard processes 
• Solid organizational skills including attention to detail and multitasking skills 
• Ability to work cross‐functionally, build relationships, and manage conflict 
• Excellent verbal and written communication skills 
• Proactive delivery of communication and follow up 
• Ability to independently prioritize and accomplish work within time constraints 
• Demonstrated agility and autonomous decision-making within ambiguous situations 
• Experience with Dassault 3DX is preferred 

 Where You'll Be 

Otto Aerospace is currently a remote workplace. We will relocate to our permanent headquarters in Jacksonville, FL beginning in 2026. This role is expected to relocate at that time. This role will be required to travel 25% to meet at our temporary facility in Fort Worth, TX (prior to relocation) or other locations in support of program activities. 

Benefits 

Otto Aerospace provides a robust benefits package that includes competitive salaries, subsidized medical, dental, and vision coverage, 401(k) opportunities, paid short term disability, voluntary long-term disability and additional term life, with 15 paid days off, 13 paid company holidays, and paid sick leave. Depending on seniority and role, some roles qualify for potential bonuses and stock options. 

Otto Aerospace is an Equal Opportunity Employer  

We are committed to diversity, equity, and inclusion in every aspect of our hiring process. All applicants will be considered for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability. We believe that a diverse team brings fresh perspectives, innovative ideas, and greater success. The more inclusive we are, the stronger we become. Applicants must be legally authorized to work in the U.S. 

#LI-Onsite

Watch your work come to life in landmark projects around the world when you partner with Syska Hennessy Group! As a global leader in consulting, engineering, and commissioning services, we specialize in highly technical buildings and the systems that bring them to life. We are seeking an experienced Electrical Engineer to join our growing design team in our Jacksonville, FL office. In this design role, you will represent Syska Hennessy Group and work in close contact and effectively interact with the Internal Design team as well as external clients and consultants. Individuals in this position must demonstrate the ability to progress from basic design work assignments to more complicated and involved projects working in conjunction with a technical team.

Our dynamic work environment provides the optimal setting to take your engineering career to the next level. From our supportive culture, diverse workforce, and competitive compensation to our flexible work schedule Monday to Thursday in the office for 9 hours and Friday for 4 hours remotely at home and fun social events, it is everything you will need for an exciting, challenging, and rewarding career.

Job Responsibilities

As an Electrical Engineer, you will be responsible for creating basic designs under the direction of the Senior Engineer and/or Senior Designer. You will also develop specifications, system narratives, and system layouts for a variety of projects of different sizes.

Additional responsibilities include:

• Beginning to establish system application, design, and operational parameters / sequences under the direction of the Senior on the project
• Participating in ensuring / Oversee QA/QC process for your work and the work of others
• Assisting in the ongoing determination of project scheduling requirements, manpower requirements, and project budgets
• Performing construction administration and field investigation tasks for assigned projects, including conducting field inspections and subsequent detailed inspection reports
• Assisting in processing RFI’s, Change Orders, Bulletins, and Addenda

Job Requirements

Successful candidates for the Electrical Engineer role should have the ability to use REVIT for system layout and spatial coordination of the production of detailed drawings. Someone who exhibits a basic understanding of the practical application of LEED principles to our building designs would be a good fit for this dynamic role.

Additional requirements include:

• Bachelor’s degree in Electrical Engineering from an Accredited Institution
• 7+ years of experience working in a consulting firm
• Current PE registration, preferred; E.I.T./FE required.
• LEED AP, highly preferred
• History of working with projects such as Federal, Healthcare, Commercial, and Mission Critical
• REVIT and the latest version of AutoCAD MEP experience
• Proficient in design and calculation software

Benefits

As an employee of Syska Hennessy, you will be part of a global firm with an amazing history! We are committed to being the best, advancing engineering design practice, and to supporting our clients with integrity. To make all of that happen, we rely on the talent, drive, enthusiasm, and total job satisfaction of the great people who work here.

As a member of our highly collaborative team, we provide you with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The personal benefits program at Syska Hennessy includes:

• Robust, comprehensive medical, dental, vision, life insurance and supplemental benefit plans
• 401(k) plan with a generous employer matching program
• Training and professional development courses
• Professional development incentive bonuses
• Dynamic Employee Resource Groups
• Competitive Paid Time Off (PTO) policy
• Transit/parking employer stipend
• ½ day work from home Fridays all year long

Syska Hennessy Group - Creating Exceptional Environments

Let’s Work Together!