Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost

We are currently looking for qualified candidates for a Mechanical Engineer position. Will require experience with process equipment systems, in a manner in which equipment is operated, safety system design and compliance codes, and with facility troubleshooting as related to oil and gas production. 

Responsibilities:

• Perform job responsibilities as Lead Engineer, leading discipline on medium projects or assigned under the direction of the Department Manager and/or Project Engineer for larger projects
• Ensure adherence to project specifications, governing codes and standards, and good engineering practice
• Ensure adherence to project health, safety, security and environmental (HSSE) requirements as well as state and federal regulations
• Monitor the schedule, ensure that project objectives are met, monitor project controls and engineering execution within the approved budget
• Responsible for reporting on engineering, design and equipment development status to the Lead Mechanical Engineer, and performing monthly or bi-weekly assessments of progress
• Participate and contribute advanced level development of all phases of project engineering, including detail design and construction support
• Experience in development of upstream production facility drawings, checking process equipment system designs and participation in hazard reviews performed to API
• Develop the technical content of Mechanical equipment calculations, specifications and data sheets for inquiry and purchase. Ensure these documents are appropriately reviewed, approved, and transmitted
• Has direct communication with equipment manufacturers and works clarifications to resolution.
• Typical equipment includes Vessels, Heat Exchangers, Fired Equipment, HVAC, Pumps, Compressors.  General knowledge of applicable codes and standards.
• Procedure development including start-up, commissioning, operating and maintenance.
• Coordinate and incorporate project requirements and standards.
• Develop Mechanical Work Plans for the installation of equipment
• Initiate Project Deviation Notices that impact the mechanical specifications, effort-hour budget and/or schedule
• Coordinate and cooperate with the Engineers of other disciplines to ensure the smooth flow of all information, and to ensure alignment with project requirements and design basis
• Initiate and runs status meetings with the mechanical team to discuss project issues, coordinate/plan key milestone efforts, etc.
• Responsible for obtaining cost related information and developing scope of work documents for project estimates (e.g., TIC estimates)

Qualifications:

• Bachelor’s degree or Master’s degree in Mechanical Engineering from an accredited college or University
• 5+ years of overall experience on capital projects from feasibility through construction
• Familiarity with various project phases and the scope/deliverables required
• Advanced MS Office skills (Word, Excel, OneNote) preferred
• Excellent oral and written communication skills in English required
• Registered Professional Engineering license preferred
• Ability to train and travel to live facilities preferred

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. 

What you'll do

The Technical Quotation Engineer is responsible for the development of detailed commercial and technical proposals for Giga Energy’s core product lines: UL891 Switchboards, Padmount Transformers, and Substations.

Where you’ll work

We are an in-office culture — velocity matters when you're building physical infrastructure, and the best decisions happen in the room. This role is ideally based in our San Francisco, Long Beach, or Houston offices, with full-time onsite expectations outside of bi-weekly WFH Fridays.

That said, we will make exceptions for truly exceptional talent if you live outside one of our hubs. If you're the right person for this role, we'll have a conversation about what works.

Responsibilities

•     Quote Generation: Build detailed, line-item quotations for UL891 Switchboards, Padmount Transformers, and Substations using Giga Energy’s internal pricing tools.
•     BOM Development: Create preliminary Bills of Materials (BOMs) based on equipment configurations provided by the Technical Sales Engineering team.
•     Vendor Coordination: Interface with third-party component vendors (breakers, gauges, protection relays, etc.) to obtain current pricing and lead times for non-standard items.
•     Proposal Packaging: Assemble formal proposal documents, ensuring all technical data sheets, lead-time estimates, and commercial terms are accurately presented to the Customer.
•     System Configuration: Perform routine equipment configurations in Giga’s software, ensuring that the selected physical footprints and electrical ratings match the project requirements.
•     Margin Analysis: Work with the Director of Technical Sales to review project margins and ensure competitive positioning while maintaining company profitability targets.
•     Database Maintenance: Assist in maintaining the accuracy of the pricing database and standardizing quote templates to improve response times for the Account Executive team.
•     Sales Support: Provide rapid-response "budgetary" pricing for early-stage project inquiries to help Account Executives qualify opportunities.
•     Up to 10%: Internal training and visits to Giga Energy manufacturing facilities.

Requirements

•     Education: Bachelor’s degree in a technical or business field (Electrical/Mechanical Engineering Technology or Construction Management preferred).
•     Experience: 1–3 years of experience in estimating, quoting, or inside sales within the electrical or power distribution industry.
•     Product Knowledge: Foundational understanding of electrical distribution equipment (Switchgear, Transformers, and Substations).
•     Detail Oriented: Exceptional accuracy in data entry and a "measure twice, cut once" mindset regarding pricing and part numbers.
•     Communication: Ability to collaborate effectively with both the field sales team and the internal manufacturing/operations teams.

Benefits

•     Subsidized health, dental, and vision insurance
•     Equity (options) in a rapidly growing startup
•     401(k) with 4% employer match
•     Unlimited PTO
•     Parental leave
•     Healthcare and Dependent Care Flexible Spending Accounts (FSA) or Health Savings Account (HSA)
•     Commuter benefits
•     Team on-sites where all offices come in–person to collaborate

What You'll Do

As Sales Engineer at Giga, you are the technical heartbeat of every deal we close. You sit at the intersection of deep infrastructure expertise and high-velocity commercial motion — translating the complexity of AI data center development (electrical distribution, mechanical systems, and civil/site work) into compelling, credible narratives that win the confidence of the world's most sophisticated buyers. You will partner directly with our sales leadership to define technical strategy for each opportunity, own the solution architecture from first call through signed contract, and serve as the customer's trusted advisor from prospect to operational handoff. This is not a support role — you are a revenue driver who happens to speak the language of substations, cooling infrastructure, and site feasibility.

Where You'll Work

We are an in-office culture — velocity matters when you're building physical infrastructure, and the best decisions happen in the room. This role is ideally based in our San Francisco, Long Beach, or Houston offices, with full-time onsite expectations outside of bi-weekly WFH Fridays.

That said, we will make exceptions for truly exceptional talent if you live outside one of our hubs. If you're the right person for this role, we'll have a conversation about what works.

Responsibilities

• Serve as the primary technical resource in the sales cycle for AI data center opportunities, owning solution design across electrical, mechanical, and civil disciplines from initial scoping through contract execution.
• Partner with Account Executives to qualify opportunities, develop account strategies, and drive technical win plans that align Giga's capabilities to each customer's infrastructure requirements.
• Lead technical discovery sessions and site feasibility assessments, translating customer power, cooling, and site requirements into buildable, fundable Giga solutions.
• Develop and deliver compelling technical presentations, proposals, and RFP responses that address utility interconnection, power distribution, MEP systems, and civil/grading constraints.
• Build and maintain trusted advisor relationships with customer engineering, procurement, and executive teams throughout the sales process.
• Collaborate with Giga's internal engineering, construction, and project development teams to ensure proposed solutions are technically sound, constructible, and commercially competitive.
• Maintain accurate technical documentation and opportunity data in CRM, providing deal status and forecast updates to sales leadership.
• Contribute to the development of sales tools including technical playbooks, case studies, and standard solution configurations that accelerate future deals.
• Represent Giga at industry events, conferences, and customer site visits to build technical credibility and pipeline.

Requirements

• 5+ years of experience in a technical sales, sales engineering, or solutions engineering role within data center, utility-scale power, or industrial infrastructure.
• Deep technical knowledge in at least two of the following disciplines: electrical systems (medium/high voltage distribution, utility interconnection, backup power), mechanical systems (cooling infrastructure, HVAC, fluid systems), or civil/site work (grading, site utilities, permitting).
• Demonstrated ability to read and interpret engineering drawings, site plans, single-line diagrams, and technical specifications.
• Experience developing technical proposals, responding to RFPs, and presenting complex infrastructure solutions to both technical and executive audiences.
• Proven track record of closing or directly supporting the close of large, technically complex deals in a B2B environment.
• Strong project management skills with the ability to manage multiple concurrent opportunities at different stages of the sales cycle.
• Bachelor's degree in Electrical Engineering, Mechanical Engineering, Civil Engineering, or a related technical field — or equivalent practical experience.

Bonus Points

• Direct experience in hyperscale or colocation data center development, construction, or operations.
• Familiarity with AI/ML workload power and cooling demands, including GPU cluster infrastructure requirements.
• Existing relationships with hyperscaler procurement teams, large enterprise IT buyers, or data center developers.
• Experience with utility interconnection processes and grid-scale power procurement.
• Professional engineering licensure (PE) in electrical, mechanical, or civil discipline.
• Exposure to power purchase agreements (PPAs), site selection, or development finance in the infrastructure sector.

Benefits

• Subsidized health, dental, and vision insurance
• Equity (options) in a rapidly growing startup
• 401(k) with 4% employer match
• Unlimited PTO
• Parental leave
• Healthcare and Dependent Care Flexible Spending Accounts (FSA) or Health Savings Account (HSA)
• Commuter benefits
• Monthly team onsites where all offices come in-person to collaborate

Location: Houston, TX or Reston, VA preferred / Remote considered / Hybrid office schedule and travel up to 50%.

Overview

Location: Houston preferred / Remote considered / Hybrid office schedule and travel up to 50%.

Overview

• Support the end-to-end engineering execution of BESS projects for data centers, from development to commissioning.Manage the technical scope of projects and serve as the technical point of contract to the project manager.
• Coordinate with internal engineering, procurement, and construction teams to ensure project milestones are met.
• Collaborate with customers, EPC contractors, OEMs, and design consultants on integration of BESS with data center electrical infrastructure.
• Review and validate system designs (electrical, civil, mechanical) and vendor submittals to ensure technical compliance and quality.
• Design and develop Single line diagrams, Schematics, Wiring diagrams for Battery storage systems
• Prepare Electrical Equipment Specifications, Data Sheets, Purchase Requisitions and Bid evaluations for inverters, Switchgear, Transformers and other electrical equipment as required
• Develop Short circuit, load flow, and arc flash studies using software such as ETAP.
• Assist in developing project schedules, procurement plans, and technical documentation.
• Conduct site walks and support field activities during installation and commissioning.
• Participate in Factory and Site Acceptance Testing (FAT/SAT) of BESS components and systems.
• Identify technical risks and propose mitigation strategies in coordination with Project Management.
• Ensure all work is compliant with relevant codes (e.g., NEC, IEEE, NFPA) and On Energy Storage’s internal standards.

• Experience working on EPC or design-build projects in the energy or critical infrastructure sector in North America.
• Familiarity with commissioning protocols and QA/QC procedures for electrical systems.
• PE or EIT certification is a plus.

Your Opportunity

Scion is paving a path in student living and the Facilities Manager is a keystone team member in the execution of our vision. This position ensures safety and functionality of the property’s buildings and equipment and ensures optimal service is carried out by the onsite Facilities team and any third-party vendors.

The Facilities Manager is a subject matter expert and experienced leader who excels in a fast-paced, agile, collegiate environment. This role demands superior problem solving, leadership and unwavering follow through. Those in the Facilities Manager position may also be asked to assist other properties.

Your Benefits

• FLSA Status Exempt
• Discretionary annual bonus
• Paid Time Off + Floating Holidays
• Health Insurance
• Dental Insurance
• Vision Insurance
• 401k Matching
• Paid Parental Leave
• Learning reimbursement opportunities

Your Responsibilities 

• Manage all building services and preventative maintenance programs to the best of industries practices, the Scion’s Standard Operating Procedures, and in compliance with the State/Federal Govt./OSHA’s Codes/regulations.
• Manage the day-to-day operations including but not limited to heating, ventilating, air conditioning (HVAC), plumbing and piping, fire protection, and general building maintenance and troubleshooting, building automation systems and building maintenance
• Monitor systems and provides diagnostics, preventative maintenance, annual testing, permitting, certification for all major building systems including, but not limited to: chilled water systems with fan coil units, air handling units with outside condensers including roof top units (RTU), building stationary boilers, hot & cold water distribution systems (plumbing, pressure/pneumatic/storage tanks, variable frequency drive (and pumps & motors), domestic hot water heaters, building automation systems (BAS), electrical distribution systems, switchgears and controls, generators, uninterrupted Power supply (UPS), elevators and lifts, parking structures (ventilation/drainage Systems, T-Joints), entrance & exit Gates and overhead doors, shingled/tarred roof, TPO membrane roofing system, EIFS, brick, vinyl, & cementitious sideboard, ACP, curtain walls, insulated glass units (IGUs).
• Operate and manage all life safety systems including fire pumps, fire alarm monitoring panels, dry/wet sprinkler systems, visual and audible alarms, back flow preventers, smoke detectors, CO2 sensors/alarms, fire extinguishers, emergency lighting, means of egress, fire
• Prioritize and schedule maintenance work, assuring quality of work consistent with Scion’s standards.
• Manage the Facilities Technicians to ensure all service requests are completed within Scion standards and are appropriately and accurately
• Manage facilities budgets.
• Review completed work to verify conformance to standards or repair
• Ensure all emergency, routine maintenance/repairs are carried out in a timely and professional manner.
• Ensure all Preventive maintenance is carried out in a timely and professional manner.
• Respond promptly and effectively to all safety/risk-management-related issues at the
• Review completed work orders for accuracy of labor hours, materials’ cost, and track recurring equipment failures.
• Conduct regular inspection tours of buildings, interior common areas and the exterior of the property, equipment and surrounding grounds for deficiencies, potential safety, health, or code problems and necessary
• Prepare written reports summarizing findings, and advises other building users as appropriate, of the
• Provide recommendations for dealing with problems noticed in
• Oversee and supervise “Turn” preparation including the prompt inspection of vacated units, makes appropriate repairs and charges, and ensures completion as
• Inspect vacant units after repairs and maintenance have been completed to determine quality of work performed and readiness for
• Manage the maintenance spare parts and the tools inventory, determining which parts/tools to stock and their stock level and working directly with General Manager to maintain inventory of parts, tools, and supplies within
• Maintain shop appearance and all mechanical, supply, electrical and storage facilities on
• Ensure proper maintenance of equipment to ensure warranty compliance and extended useful life.
• Oversee all other contracted work in the building, obtaining bids and negotiating prices with vendors and contractors, as approved by the General Manager, Regional Manager or the Regional Facility Manager.
• Coordinate deliveries, schedules, and performance of all facility related
• Ensure proper safety procedures are followed, personal protective equipment is used, and health & safety policies are
• Manage process for keying and coring/coding of locks and maintain lock procedures, logbooks and protocols for key management and
• Effectively implement standard operating procedures and preventive maintenance programs according to Scion’s
• Take part in emergency preparedness planning and acts as essential personnel in
• Escalate unique or urgent repairs/replacements to General Manager and Regional Facilities Manager.
• Maintain records on all major systems including maintenance manuals, manufacturer’s cut sheets, warranties, and equipment
• Work closely with the General Manager and Regional Facilities Manager to manage, formulate and track facilities and capital
• Hire, train and develop Facilities team members, holding them accountable for delivering a high level of

The responsibilities listed above may not be all-inclusive.

What We Require

• High school diploma/GED, trade school diploma, or military training
• 8 years of relevant experience managing building system in multi-unit residential properties, 5 years of supervisory experience
• 5 years’ experience with building automation systems, and life safety systems
• EPA 608 Universal certification
• HVAC/EPA 608 Universal certification
• Certified Pool Operator (CPO), or intention to obtain within six months
• Expertise in plumbing, HVAC, electrical and mechanical systems as well as generally accepted maintenance practices
• Boiler operator or Stationary Engineer Certificate/License
• Ability to read and interpret documents such as design drawings, blueprints, safety guidelines, operating and maintenance instructions and procedural manuals
• Ability to manage multiple projects simultaneously, set priorities and meet deadlines
• Basic computer working knowledge, including Microsoft Office and CMMS
• Valid driver’s license
• Ability to stand 8 hours or longer per day and lift up to 100 lbs. as necessary

 Operational Details

• Job location is at the assigned property. May be required to travel periodically.
• Serves in an “on-call” capacity, except during approved PTO periods.

The Scion Group LLC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, religion, creed, national origin, color, gender, sex, sexual orientation, gender identity or expression, age, physical or mental disability (as long as the employee/applicant is otherwise qualified for the job with or without a reasonable accommodation), genetic information, HIV/AIDS status, marital status, uniformed service, veteran status, pregnancy or other legally protected status or category under federal or state law. The Scion Group LLC complies with applicable state and local laws governing nondiscrimination in employment in all locations in which the Company has properties. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation, training and other terms and conditions of employment. The Scion Group LLC is committed to the principles of equal employment opportunities.

IND2 #wearehiring #werehiring

Position Overview

Woolpert is seeking a Program Director to lead business development and growth initiatives within the Industrial/Advanced Manufacturing practice. This role requires a licensed Architect or Engineer and is primarily responsible for driving sales and expanding market presence through the development, cultivation, and strengthening of client relationships. Remote work options available for the right individual. 

The Program Director will collaborate across multiple practice areas and service lines to identify and develop new business opportunities, ensuring that services are delivered in alignment with Woolpert’s commitment to excellence and its position as an industry leader. This role plays a critical part in shaping strategic growth initiatives while maintaining a high standard of client satisfaction and technical performance. The Program Director reports to the Private/Public Market Director.

We are unable to provide visa sponsorship for this position.  Applicants must already possess work authorization in the country the job is located.    #LI-SN1

Business Development

• Strengthen and expand existing client relationships to identify and pursue additional project opportunities aligned with the service line, practice area, and firm-wide strategy.
• Develop new client relationships that align with targeted client profiles, project types, and overall business objectives.
• Position and promote Woolpert as an industry leader within assigned markets, practices, and services to both new and existing clients.
• Provide early-stage project feasibility assessments and contribute strategic input to project design and planning.

Collaboration and Client Support

• Mentor and support Project Managers in negotiating project scope, schedules, fees, and contract terms.
• Partner with Project Managers to proactively identify, address, and resolve project issues that may impact client objectives or satisfaction.
• Clearly define, communicate, and manage client needs and expectations throughout the project lifecycle.
• Maintain continuous and proactive communication with stakeholders (clients, client leadership, and internal teams) to anticipate, address, and resolve project-related challenges.

What You Will Bring:

•  Bachelor’s or Master’s degree in architecture, Mechanical Engineering, Civil Engineering, Electrical Engineering, or a related discipline required.
• 15+ years of relevant professional experience within the Industrial/Advanced Manufacturing sector.
• Current professional licensure/registration in the applicable discipline.
• Proficiency in Microsoft Office 365 applications, including Word, Excel, Teams, SharePoint, Outlook, and PowerPoint; working knowledge of AutoCAD and Bluebeam required.
• Ability and willingness to travel as needed to support the objectives and demands of the practice area.

General Aptitude

• Demonstrated ability to make sound, data-driven decisions and recommendations through the effective evaluation and synthesis of information.
• Exhibits an enterprising, innovative, and proactive leadership and management approach.
• Proven leadership capabilities with the ability to influence, guide, and inspire teams and stakeholders.
• Ability to research, define, and manage multiple project scopes, schedules, and budgets concurrently.
• Skilled in establishing and maintaining strong working relationships with clients, vendors, leadership, and internal teams.
• Strong negotiation, conflict resolution, and problem-solving abilities.
• Excellent facilitation and meeting leadership skills, with the ability to drive productive outcomes.
• Exceptional verbal and written communication skills, including the ability to deliver clear, compelling presentations.
• Solid understanding of project management principles, with the ability to facilitate technical discussions as needed.
• Highly organized, with the ability to manage multiple, competing priorities in a dynamic environment.
• Engaging professional demeanor supported by strong interpersonal and relationship-building skills.

Benefits You Will Love

Certified as a Great Place to Work, Woolpert is one of the fastest-growing architecture, engineering, and geospatial companies in the world. With over 75 offices and countless projects around the globe, you’ll work on meaningful assignments that improve quality of life around the world. In addition to offering competitive pay, we provide employees with a robust set of unique benefits, including:

• Freedom to Work program: Set your own schedule and location (as appropriate).
• Principal program: Earn the opportunity to become an owner of the firm.
• Flexible paid time off/vacation: Take time off when it makes sense for you and your team.
• Career development: Explore a wide range of learning and growth opportunities within and across industries.
• Health, life, vision, and dental insurance: Cover all your medical bases.
• Paid sick time, retirement plan, fitness reimbursement, pet insurance, identity protection, technology stipend, employee assistance program, and more!

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

Venture Global is seeking an Project Engineering Manager to join our team.

The Senior Project Engineer will have the following responsibilities:

• Focal point for technical issues/coordination between EPC and owner furnished equipment suppliers. Liaise with home office engineering for the resolution of technical issues that cannot be resolved at site.
• Participate in project safety program through safety walks, attending safety reviews, and providing safety input into designs, procedures, and activities.
• Manage liquefaction scope RFI process between EPC and Owner Furnished Equipment suppliers.
• Review drawings issued by EPC and equipment suppliers.
• Identify quality issues related to defective or non conforming workmanship or materials. Work closely with construction team to ensure that contractors produce the required quality of work in line with project drawings and specifications.
• Research code issues and obtain necessary approvals with subject matter experts
• Attend kick-off and review meetings while interacting with EPC Contractors.
• Support systems completion process including completion of ITRs and PLIs. Ensure punch list items are prepared, collated and cleared expediently.
• Support commissioning activities for liquefaction systems. Ensure systems are complete and pre-requisites have been completed.  Coordinate interfaces as required.
• Support management of change processes.
• Review installation plans, documents, and requirements specific to area of responsibility and ensure requirements are clearly communicated to construction team. Actively support constructability program and communicate constructability issues to discipline engineers.
• Understand industry standards, applicable regulatory codes and requirements, and company standards
• Assist in development and review of turnover dossiers.
• Attend project progress meetings and deliver a status of site engineering activities.
• Build relationship with contractor project engineering counterparts.
• Understand contractual requirements and communicate these to team
• Actively support safety, quality, schedule and cost objectives

 Basic Qualifications

• Bachelor’s degree in Mechanical or Chemical Engineering
• Minimum 5 years of experience with design, construction, or operation of petrochemical infrastructure. Experience representing asset owner in these roles is a plus.
• Broad base of general engineering knowledge including mechanical, electrical, and I&C.
• Team player with a mindset to work with a global team and with diverse cultures
• Experience working on projects with multiple interfaces.
• The candidate will be required to travel domestically.
• Must exhibit a strong desire to take ownership of deliverables
• Experience with cryogenic or liquefaction systems is a plus.
• Experience with systems completion, commissioning, or turnaround activities is a plus.
• Able to read detailed construction drawings and specifications detailing the system design, including P&IDs and one lines
• Excellent technical, practical, and communication skills.

  Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

We’re looking for a Senior Compliance Engineer with deep expertise in regulatory requirements, codes, and certification processes applicable to BESS, power electronics, and electrical distribution systems e.g. panelboards, switchboards, etc.. This is a product-focused and cross-functional role responsible for ensuring that our systems meet all applicable North American and international standards, as well as ISO/RTO interconnection and market requirements. You will serve as the internal authority on compliance, working closely with product, R&D, and project engineering teams to ensure designs are certifiable, deployable, and aligned with evolving regulatory frameworks.

Key Responsibilities:

• Lead compliance strategy and execution for BESS, DC cabinets, inverters, and related power, controls /IT equipments.
• Interpret and apply standards such as UL, CSA, IEEE, IEC, and NFPA to product and project designs.
• Act as the subject matter expert on ISO/RTO regulatory requirements (e.g., interconnection, grid codes, testing protocols).
• Define and manage certification roadmaps for new and existing products.
• Coordinate and support product testing and certification activities, including UL listings, field evaluations, and special inspections.
• Develop and maintain with Technical Writer compliance documentation, including test plans, reports, and certification packages.
• Work directly with NRTLs and certification bodies to facilitate approvals and resolve technical issues.
• Support engineering teams by ensuring designs meet code and standard requirements from early development stages.
• Review and validate test procedures and results, including electrical, thermal, environmental, and safety testing.
• Support project teams during AHJ reviews, permitting, and commissioning, addressing compliance-related questions.
• Monitor and interpret regulatory changes and emerging standards, ensuring proactive alignment of products.

Required Skills & Experience:

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or related field.
• 10+ years of experience in compliance, certification, or regulatory engineering for BESS, power electronics, or industrial electrical systems.
• 4+ years experience with working knowledge of key standards, including:
  • UL (e.g., UL 9540, UL 9540A, UL 1741, UL 508A)
  • CSA standards for electrical equipment
  • IEEE standards related to power systems and interconnection
  • IEC standards for international compliance
  • NFPA (e.g., NFPA 855)
• Deep understanding of test procedures and certification processes, including safety, thermal runaway, environmental, and performance testing.
• Familiarity with ISO/RTO requirements (e.g., ERCOT, PJM, CAISO, MISO) and grid interconnection standards.
• Experience working with NRTLs (e.g., UL, CSA, Intertek) and managing certification programs.
• Ability to interpret and apply codes, standards, and regulatory language into practical engineering requirements.
• Strong communication skills across engineering, regulatory authorities, and external certification bodies.
• Project Management skills.

Preferred Experience:

• Experience with utility-scale and/or C&I BESS deployments.
• Direct involvement in UL 9540A fire testing, LSFT or similar safety validation programs.
• Knowledge of utility -scale inverter compliance requirements.
• Experience supporting permitting and AHJ engagement in the U.S.
• Background in quality systems or regulatory audits.

The Sales Engineer will lead the technical-commercial strategy connecting ON.energy’s business development, engineering, and customer teams. This role oversees the delivery of advanced Battery Energy Storage System (BESS) and power infrastructure solutions for hyperscale data centers, industrial operations, and utility-scale clients. The ideal candidate combines deep expertise in energy systems and data center electrical infrastructure with leadership experience in consultative sales, solution design, and project development—driving both customer success and business growth.

As a Sales Engineer at ON.energy, you will:

Technical Pre-Sales

• Lead technical engagements with clients to define system architecture, sizing, and performance requirements for BESS and data center power systems.
• Develop conceptual and detailed design proposals, single-line diagrams, and equipment specifications.
• Support proposal development by preparing technical documentation, cost estimates, and performance simulations.
• Translate customer requirements into system configurations optimized for performance, cost, and reliability.

Commercial and Client Interfacing

• Partner with business development and executive teams to define bid strategies and technical differentiators.
• Deliver technical presentations and system demonstrations to key stakeholders, including C-level executives, engineers, and procurement teams.
• Participate in RFP/RFQ responses, ensuring all technical deliverables meet client specifications.
• Support contract negotiations by clarifying technical scope and validating cost structures.

Internal Collaboration

• Work closely with engineering, project management, and procurement teams to ensure seamless project handoff and delivery.
• Provide feedback to the product and engineering teams regarding customer needs and emerging market trends.
• Assist marketing and product management with content and case studies demonstrating the value of ON Energy’s solution.

Requirements

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or related discipline.
• 7+ years of experience in managing technical sales, applications engineering, or solution engineering within the BESS, renewable energy, or data center industries. Strong understanding of battery storage systems (lithium-ion preferred), inverters, switchgear, and controls.
• Knowledge of data center electrical infrastructure including UPS systems, backup generation, and critical power distribution.
• Proficiency in interpreting electrical drawings and system schematics.
• Excellent communication and presentation skills for both technical and executive audiences.

Preferred

• Master’s degree in Engineering, Energy Systems, or Business Administration.
• Familiarity with Procore, AutoCAD, or electrical modeling tools (ETAP, HOMER, or similar).
• Experience with EPC or IPP project development processes.
• Understanding of interconnection, permitting, and grid compliance requirements.

Competencies

• Analytical problem-solving with strong attention to detail.
• High commercial awareness and ability to translate technical value into business outcomes.
• Strong sense of ownership and accountability in a fast-paced environment.
• Cross-functional collaboration mindset and ability to interface with engineering, finance, and legal teams.

Location: Amarillo, TX (Project-Based, On-Site)

About On Energy Storage

On Energy Storage designs, deploys, and operates advanced Battery Energy Storage Systems (BESS) supporting commercial, industrial, and utility customers across the Americas. Our engineering team drives high-quality, technically rigorous project execution across interconnection, site design, and protection & control systems. We prioritize speed, accuracy, and operational reliability in every project.

Position Summary

On Energy Storage is seeking an experienced Field Engineer to support the construction and commissioning of a utility-scale BESS project in Amarillo, TX. This is a full-time, on-site role embedded within the project team. The Field Engineer will serve as the primary technical resource for the EPC contractor and commissioning teams, providing real-time electrical and mechanical guidance, resolving field issues, and ensuring that installation activities align with On Energy Storage's engineering standards, design documents, and applicable codes. The ideal candidate brings a strong electrical engineering background with hands-on experience supporting field construction and commissioning activities on power systems or energy storage projects.

Key Responsibilities

- Serve as the on-site technical point of contact for the EPC contractor.

- Interpret engineering drawings and support field installation teams.

- Review and resolve RFIs with the engineering team.

- Monitor installation for compliance with design and codes.

- Identify and resolve field discrepancies.

- Document and share lessons learned on equipment being installed.

- Support FAT and SAT activities.

- Maintain field reports and documentation.

- Coordinate with engineering and EPC teams.

- Participate in meetings and safety reviews.

- Verify equipment installation compliance.

- Support punch list and project closeout.

Qualifications

- Bachelor's degree in Electrical Engineering or related field.

- 3-5 years of relevant experience.

- Strong understanding of electrical systems.

- Ability to read electrical drawings.

- Knowledge of NEC, IEEE, NFPA.

- Troubleshooting and communication skills.

- Proficiency in Microsoft Office and Procore.

- Ability to work on-site in Amarillo, TX.

Preferred Qualifications

- Experience with BESS systems.

- EPC or infrastructure project experience.

- Commissioning and QA/QC familiarity.

- Bluebeam experience.

- SCADA/EMS exposure.

- EIT or PE certification preferred.

About the Role

The Ground System Deployments team is looking for an innovative, collaborative and self-driven Civil Project Engineer to join the team to ensure the successful deployment of Zipline’s Ground Systems in all possible applications and configurations. 

This role is well suited to seasoned civil engineers looking to apply their experience designing novel and innovative sites, foundations and structures to advance and accelerate the new and growing industry of  autonomous drone delivery ground systems. 

With broad scope to influence the design of current and next generation systems this role will jopin a stellar team responsible for the site level designs, layouts, civil designs, structural and foundation designs and implementation. Interacting with various mechanical, structural and electrical engineering stakeholders across the organization this role will  ensure the overall system and its site design work hand in hand to ensure the successful deployment of Ziplines Ground Systems within cost and timeline goals. 

This role has a mandate to drive positive change through the organization - as problems or scenarios occur this individual will be tasked with both 0 to 1 problem/project responsibility and also working with the broad engineering and deployments organization to implement foundation changes to product and process as needed. 

This position can be based out of our San Francisco, Dallas or Houston Offices. Onsite is preferred, but this role can be remote flexible with up to 50% travel for the right candidate.

WHAT YOU’LL DO

• Act as the Civil Engineer of Record for Zipline projects in Texas and other jurisdictions
• Create, refine and update civil layouts for the sites. Act as the Zipline representative for any technical clarifications from cities or jurisdictions regarding our designs. 
• Contribute to the civil and site design standards of Zipline sites. 
• Contribute to the pavement, drainage, and sitescape designs and approaches of Zipline sites and structures. 
• Advise on permitting, codes and and other certification efforts relevant to the projects and structures.  
• Engage and interact with cities and relevant inspectors or relevant external parties to ensure timely project approvals and deployment. 
• Ensure relevant and applicable civil strategies are investigated and implemented where appropriate - grading designs, curb designs, pavement designs
• Understand our internal and external customer’s business and needs and work with our internal engineering and business teams to refine and roadmap necessary changes to ensure the successful deployment of the Ground Systems infrastructure. 
• Source and develop relationships with outside organizations (local jurisdiction, utilities, contractors, OEM and material suppliers etc).
• Evaluate all options and a lean budget, select best vendors to ensure reliable and quality services and products.
• Understand and mitigate the preconstruction, construction, operational and sustaining  risks associated with each project. 
• Interact directly with internal and external partners and stakeholders as needed. 
• Domestic travel to project sites expected on an ad-hoc basis. 

WHAT YOU’LL BRING

• Civil Professional Engineering qualification with stamping capacity in Texas (or the ability to quickly obtain stamping capacity in Texas). Ability to stamp in Arizona and other sunbelt states a strong preference, or the ability and capacity to quickly gain this qualification. 
• Bachelor's degree or higher  with minimum 6 years of experience.
• The individual should have an Engineering background (Civil, others acceptable with relevant experience and stamping capacity) and have worked in the construction, electrical design/EPC, or renewable energy industry, or equivalent industries for 4+ years. The individual should have experience (4yrs+) in working with:
  • Civil codes and building standards, and applicable design and management software.
  • Technical Product Management, Technical Program Management or applicable areas.
  • Systems engineering and  system architecture.
  • External design teams (Architectural, Structural, Civil,Electrical MEPs) on commercial or industrial development  / construction projects.
  • Experience with automated logistics, UAV aviation, EVSE Charging, Renewable Energy and Battery Energy Storage Systems or equivalent industries a plus. 

• Strong candidates should have excellent communications skills to:
  • Drive internal alignment of requirements for projects based on business needs.
  • Provide leadership team with updates on scope, schedule and budgets. 
  • Drive external parties for the implementation of real estate projects. 
• Must be eligible to work in the US.

What Else You Need To Know

Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws or our own sensibilities.

We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply!

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Senior Director, Quality Operations located in Houston, TX.

Overview

The Senior Director – Quality, Operations will lead the operational quality strategy and execution for Venture Global’s LNG facilities, supporting operations, maintenance, and reliability activities across Calcasieu Pass LNG and Plaquemines LNG.

This role ensures quality excellence across routine operations, planned turnarounds, and both scheduled and emergent outages. The leader will drive rigorous QA/QC practices, defect elimination, and operational discipline across all operational activities.

The role partners closely with Operations, Maintenance, Reliability, HSSE, Engineering, and Supply Chain to ensure that maintenance execution, repairs, modifications, and outage work meet the highest standards of reliability and safety.

This leader will serve as the enterprise operational quality authority and ensure strong field presence, audit rigor, and governance for non-conformance management, stop-the-line authority, root cause analysis, and lessons learned implementation across sites.

Key Responsibilities

Operational Quality Leadership

• Lead operational quality programs across operations including maintenance execution, support reliability improvement initiatives, turnarounds and outages, equipment repairs, and contractor oversight.
• Ensure consistent application of QA/QC standards across mechanical, electrical, instrumentation, rotating equipment, and all systems.
• Drive a culture where quality is owned by operations and supported by quality leadership.
• Turnaround and Outage Quality Governanc
• Provide quality leadership for planned turnarounds and outages including planning, readiness reviews, inspection verification, contractor oversight, and final work acceptance.
• Establish quality checkpoints across scope development, readiness, execution oversight, and closeout.
• Ensure restoration of critical equipment meets OEM and engineering specifications.
• Field Quality Assurance & Audits.
• Conduct field walkdowns, maintenance execution audits, contractor inspections, and mechanical integrity reviews.
• Maintain visible field presence reinforcing operational discipline and quality ownership.

Non-Conformance Management

• Own the enterprise operational non-conformance management process working closely with operations to ensure all defects are captured and seamless approach working with Operations.
• Ensure accurate defect identification, classification, prioritization, and closure.
• Manage systems that capture defects, quality issues, and maintenance execution problems.

Stop-the-Line Authority

• Establish and reinforce a Stop-the-Line culture ensuring employees can halt work when quality or safety standards are compromised.
• Ensure rapid resolution and documentation of issues.

Root Cause Analysis Leadership

• Lead/Support RCA investigations for major equipment failures or reliability issues.
• Drive CAPA closure and verify effectiveness of corrective actions.

Cross-Site Lessons Learned Program

• Develop and institutionalize lessons learned programs across Calcasieu Pass and Plaquemines.
• Translate learnings into updated procedures, training content, and engineering improvements.

Contractor Quality Management

• Govern contractor quality performance during outages and maintenance work.
• Establish quality expectations, oversight processes, and performance metrics.

Quality Culture & Workforce Engagement

• Drive a culture of operational quality through training, leadership engagement, and frontline ownership.
• Partner with training teams to embed QA/QC expectations into workforce development.

Performance Measurement & Reporting

• Track operational quality KPIs including rework rates, turnaround performance, defect recurrence, and non-conformance closure times.
• Provide executive dashboards and reporting on operational quality performance.

Qualifications

Education

• Bachelor’s degree in Engineering, Operations, or related discipline required.
• Advanced degree preferred.

Experience

• 15+ years of experience in LNG operations, oil & gas operations, petrochemical facilities, or heavy industrial process plants.
• 10+ years in quality, reliability, or operations leadership roles.
• Experience supporting turnarounds and outages in complex industrial facilities preferred.

Technical Expertise

• Strong expertise in LNG operations and maintenance practices.
• Deep knowledge of root cause analysis methodologies.
• Familiarity with mechanical integrity programs and maintenance quality processes.
• Experience implementing operational QA/QC programs in energy environments.

Certifications (Preferred)

• Lean Six Sigma Black Belt
• ASQ Certified Quality Engineer (CQE)
• Reliability or maintenance certifications

Leadership Competencies

• Strong field leadership presence
• Ability to influence operations teams and contractors
• Excellent investigative and problem-solving skills
• Strong communication and executive reporting capabilities
• Ability to drive cultural change across complex organizations

Success Measures

• Reduction in operational defects and maintenance rework
• Improved turnaround and outage quality performance
• Faster non-conformance resolution
• Effective RCA implementation and CAPA closure
• Measurable reliability improvements
• Adoption of quality culture across operations

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s three Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost 

We are seeking a Senior Mechanical Engineer - Static Equipment.

This position will be located at our Downtown Houston office and is a Monday-Friday position.

Responsibilities: 

• Mechanical MOC/HAZOP signoff
• Site mechanical technical authority
• VG engineering sign off on static equipment internal inspection / readiness
• Validation of pneumatic test packs and exclusion zone calculation
• Provides input to weekly site engineering report
• Review surveyor deliverables and assist with fit up / interface misses at site 

Qualifications: 

• Bachelor of Science degree in Mechanical Engineering
• Minimum of twelve years combined experience in Design, Commissioning, or Operations of Static Equipment. Experience representing asset owner in these roles is a plus.
• Experience in LNG liquefaction facilities highly preferred.
• Fire Equipment experience a must.
• Ability to perform multiple tasks and work within project deadlines, and adjust as priorities changes occur
• Possess the ability to mentor others through technical training and guidance on planning, scheduling, and engineering subjects
• Have the ability to read and interpret engineer drawings to include P&IDs, PFDs, C&Es, One Line Diagrams, Isometrics, and Civil/Structural drawings
• Knowledge of applicable ASME and API standards.
• Experience with systems completions.
• Strong understanding of the design and operation of heat exchangers and process piping.
• Exhibit excellent written and oral communication skills 

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s  Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Director, System Planning - Pipeline located in our Houston, TX office.  

The Director, System Planning is responsible for leading the strategic planning, hydraulic modeling, and development of natural gas transmission pipeline systems. This role oversees the System Planning function to ensure safe, reliable, and efficient utilization of pipeline assets, while driving project development, capacity expansions, and new energy initiatives. The Director will manage cross-functional teams, collaborate with business development and operations, and spearhead major projects to enhance system capacity, operational efficiency, and revenue generation in alignment with company goals.

Key Roles and Responsibilities

• Direct the System Planning function, including hydraulic design, system modeling, capacity evaluations, and operational analysis to maintain high standards of safety, reliability, and efficiency.
• Assist in the development and execution of transmission asset expansions, new energy ventures, and major projects (e.g., supply enhancements, market links, and reliability improvements) that increase system capacity and generate significant EBITDA.
• Participate in multidisciplinary teams through project life cycles, including Feasibility and FEED phases, ensuring designs meet operational & commercial requirements.
• Oversee the creation and maintenance of pipeline system models, load forecasting tools, and future state analyses to optimize revenue, maintenance capital, and system performance.
• Collaborate with Business Development, Operations, Gas Control, and Project Execution teams to identify transportation opportunities, cultivate customer relationships, and minimize operational disruptions.
• Develop and maintain a robust pipeline of future initiatives to support strategic growth, market presence, and financial objectives.

Qualifications and Requirements

• Education: Bachelor's degree in Engineering (Mechanical, Civil, Petroleum, or related field) required; Master's degree or advanced certifications preferred.
• Experience: 10+ years of progressive experience in natural gas pipeline operations, system planning, hydraulic design, project development, and business development within the energy sector. Proven track record in leading large-scale pipeline projects and teams.
• Leadership: Demonstrated experience managing teams through significant growth periods, major capacity expansions (e.g., 1+ BCF/d), and high-value projects generating substantial revenue.
• Technical Skills: Expertise in pipeline hydraulic modeling, system analysis, load forecasting, compressor station design, and tools for capacity evaluation. Strong knowledge of gas transmission systems, contractual entitlements, and operational optimization.
• Interpersonal and Strategic Skills: Excellent collaboration, communication, and customer relationship management abilities; experience interfacing with commercial teams, operations, and external stakeholders. Strategic thinking with a focus on economic feasibility, risk management, and long-term planning.
• Preferred: Professional Engineer (PE) license or equivalent certifications; familiarity with FERC regulations and industry standards for gas pipelines.

This role offers the opportunity to drive impactful growth in a dynamic energy environment, leading initiatives that enhance system reliability and company performance.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

Position Overview

Venture Global is seeking a Principal Engineer, Rotating Equipment to join our Pipeline Engineering team in Houston, Texas.

This role will serve as the technical authority for all pipeline rotating equipment systems and will oversee activities spanning the complete equipment life cycle — from specification and selection, through commissioning and startup, and continuing through long-term operation, maintenance, and reliability monitoring.

The Principal Engineer will ensure that design and operational decisions support maximum equipment uptime, safety, and cost-efficiency, and will guide both internal teams and external engineering partners to achieve consistent reliability and best-in-class performance of turbomachinery assets across Venture Global’s pipeline compressor station facilities.

Key Responsibilities

Equipment Specification and Selection

• Define and validate technical requirements for rotating equipment, including gas and steam turbines, compressors, pumps, motors, and related auxiliaries.
• Review vendor proposals and engineering deliverables to ensure alignment with Venture Global’s operational strategy, reliability targets, and technical standards.
• Collaborate with EPCM and OEM partners during design development to ensure optimal equipment configuration and materials selection for long-term maintainability and performance.

Commissioning and Startup

• Advise on pre-commissioning, commissioning, and startup activities, ensuring that manufacturer recommendations and operational requirements are met.
• Support field teams with performance testing, vibration analysis, and acceptance validation of rotating equipment systems.
• Coordinate issue resolution between operations, maintenance, and vendor teams during early operational phases.

Operations and Maintenance

• Provide day-to-day technical support for equipment performance, troubleshooting, and maintenance optimization across operating facilities.
• Review predictive maintenance data and vibration analysis reports; ensure prompt and accurate interpretation leading to actionable recommendations.
• Drive Reliability Centered Maintenance (RCM) improvements and ensure maintenance plans are cost-effective, safe, and aligned with reliability goals.
• Support turnaround planning and execution with detailed technical scope input, risk assessments, and resource coordination.

Reliability Monitoring and Improvement

• Implement and manage condition monitoring and reliability tracking systems, ensuring equipment health indicators are properly analyzed and acted upon.
• Develop Key Performance Indicators, including MTBR and MTBF, and the development and oversight to a Reliability Improvement Team in pursuit of continuous improvement.
• Lead Root Cause Failure Analysis (RCFA) exercises and produce comprehensive failure reports with recommended corrective actions.
• Identify opportunities for design, maintenance, or operational improvements across the fleet to reduce downtime, unplanned outages, and cost of ownership.
• Promote standardization and reduced interfaces across engineering, operations, and vendor teams to improve consistency and communication through the asset life cycle.

Leadership and Mentorship

• Serve as the pipeline organization’s subject matter expert for rotating equipment, mentoring less experienced engineers and technicians.
• Foster collaboration with Venture Global’s Terminal Engineering and Maintenance Teams, EPCM partners and OEMs, ensuring that reliability and maintenance considerations are embedded in all life cycle stages.

Qualifications

Education and Certifications

• Required: Bachelor’s degree in Mechanical Engineering or relevant technical discipline (required).
• Preferred: Professional Engineering (PE) license.

Experience

• Minimum 15 years of engineering experience in rotating and mechanical equipment within the natural gas pipeline industry.
• Proven expertise across the entire equipment life cycle — specification, selection, commissioning/startup, operations, maintenance and reliability monitoring and improvement.
• Extensive knowledge of gas turbines (Frames and Aero-derivatives), compressors, and associated systems such as couplings, bearings, lubrication systems, and dry gas/mechanical seals.
• Extensive experience with major turbomachinery OEMs, including Baker Hughes, Siemens and Solar.
• Strong background in compressor performance evaluation, vibration analysis, and reliability analytics.
• Extensive experience with key pipeline codes and standards, such as 49 CFR Part 192, ASME B31.8, and API 616, 617 and 692.

Technical Skills

• Proficiency in RCFA and RCM methodologies.
• Working knowledge of CMMS systems and condition monitoring software (e.g., Bently Nevada or equivalent).
• Familiarity with engineering documentation (P&IDs, equipment specs, wiring diagrams, maintenance procedures).
• Ability to synthesize technical data into clear operational recommendations.
• Development of governing standards and procedures.

Soft Skills

• Excellent communication, collaboration, and problem-solving skills.
• Able to lead multidisciplinary teams and coordinate with external stakeholders effectively.
• Strong leadership and mentoring capabilities, fostering technical excellence and reliability culture.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

Position Summary:

The Product Service Engineer will be a critical role within the Owner Furnished Equipment (OFE) Product Service Organization. The Engineer will be a Subject Matter expert and lead the timely and quality resolution of technical issues and drive strategic initiatives to optimize performance critical to the performance and operation of Venture Global Equipment. This role will involve coordinating and collaborating with various stakeholders, including Operations and Engineering teams and equipment suppliers, to ensure the timely and efficient resolution of technical solutions.

Key Responsibilities:

• OFE Management:
• Define and manage key performance indicators (KPIs) to measure the effectiveness of OFE management.
• Develop and implement comprehensive processes and strategies for the management of technical solutions throughout the project lifecycle of OEM equipment.
• Coordinate with Operations and Engineering teams to identify and define technical issues and work with equipment suppliers to effectively resolve and implement solutions to ensure that OFE specifications and requirements are met.
• Oversee Root Cause Analysis and implement Preventative and Corrective Actions to ensure long-term resolutions.
• Risk Mitigation:
• Proactively identify and assess potential risks associated with the operation and maintenance of equipment.
• Develop and implement risk mitigation plans to minimize the impact of potential issues.
• Collaborate with project and operational teams to adequately address OFE-related risks.
• Stakeholder Coordination:
• Build and maintain strong relationships with operational and engineering teams, equipment suppliers, and other relevant stakeholders.
• Facilitate effective communication and collaboration among team members to ensure project success.
• Resolve conflicts and address issues related to OFE delivery and management.
• Performance Monitoring:
• Track the performance of OFE delivery and management processes using data analytics.
• Identify areas for improvement and implement corrective actions to optimize performance.
• Prepare regular reports on OFE performance and status for senior leadership.

Qualifications:

• Bachelor’s degree in engineering or a related field.
• 15+ years of experience
• Understanding of the LNG industry and related equipment.
• Strong leadership, communication and interpersonal skills.
• Excellent problem-solving and decision-making abilities.
• Proven ability to manage complex projects and meet deadlines.
• Program and/or project management skills with a working knowledge of project management software (e.g., Primavera P6, Microsoft Project).

Preferred Experience:

Experience in one or more of the following areas or with specified equipment is desired:

• General design, application, operational reliability, and servicing of Advanced Control Systems for gas turbine-based power applications such as combined cycle or simple cycle power plants or mechanical drive applications.
• Specific experience with GE Vernova’s Mark VIe control system software and hardware
• Understanding of advanced control and sensor applications for operational flexibility, RAM optimization, and data collection for general equipment health monitoring, for diagnostics and prognostics, and general optimal plant operation.
• Familiarity with GE Vernova’s LM2500/LMX or similar aeroderivative gas turbines, GE Vernova’s 7EA Gas Turbine and associated equipment, or Baker Hughes gas turbine products specifically their M35 Gas Turbine.
• Product Service with understanding of product Service workflow, tools and processes including root cause analysis.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a leader to join us as a Lead Engineer, Piping. The Lead Piping Engineer is responsible for analyzing and overseeing the design of piping systems ensuring that the systems are efficient, safe and meet all regulatory standards.

This position will be located in Houston, TX.  Travel may be required depending on project location. This is an in-office position Monday-Friday schedule.

Responsibilities:

Project Leadership:

• Responsible for the entire piping scope on assigned projects, including work done in overseas offices. 
• Responsible for all subsections of the piping discipline including, stress analysis, material specification, design and material take-off.
• Develop, oversee, and ensure adherence to project timelines, budgets, and deliverables.
• Track and report progress during project execution.
• Coordinate with project managers, engineers, and clients to clarify scope and objectives.

Piping Design and Engineering:

• Provide guidance on complex piping systems using best engineering practices.
• Review piping layouts, isometrics, and 3D models as well as the work performed by overseas offices.
• Ensure compliance with project specifications, standards, codes (ASME, API), and best practices.
• Conduct stress analysis, material selection, and pipe routing optimization.
• Provide procurement support for piping items (specialty items, pipe supports, valves, etc.).
• Ensure the check and release of various piping deliverables/documents for use by downstream parties.

Team Supervision:

• Conduct regular design reviews and ensure alignment across disciplines.
• Foster a collaborative and efficient team environment.

Coordination and Communication:

• Liaise with other engineering disciplines (civil, structural, mechanical, electrical, instrumentation, process safety) to ensure seamless integration of piping systems.
• Review and approve vendor drawings.
• Participate in design reviews, HAZOP studies, and project presentations.
• Address technical queries and manage design changes effectively.

Quality Assurance:

• Implement quality control measures and conduct regular design audits.
• Ensure deliverables meet project and regulatory standards.
• Address any issues or risks that could impact project delivery

Qualifications:

Education and Experience:

• Bachelor’s degree in Mechanical Engineering, or equivalent (preferred).
• Minimum 10-15 years of piping design experience using 2D/3D software. Good knowledge of Piping design of LNG projects.

Technical Skills:

• Proficiency in design review software like SmartPlant Review and Navisworks.
• Strong knowledge of piping codes and standards (ASME, ANSI, API, and PIP).
• Proficiency in material identification and selection.
• Strong knowledge of Cesar II and pipe stress analysis reports for all common systems of piping.
• Experience with LNG projects is preferred.
• Strong knowledge of AIV and FIV principles and screening is preferred
• Proficiency in development of piping material class specifications is preferred
• Strong knowledge in NDE and testing requirements of piping systems is preferred
• Proficiency in valve application and specification is preferred

Leadership and Communication:

• Proven ability to lead and mentor teams.
• Excellent communication, problem-solving, and decision-making skills.
• Strong organizational skills and ability to manage multiple priorities.

 Additional Skills:

• Familiarity with construction and installation practices.
• Understanding of project management principles.
• Experience with international projects and multicultural teams is a plus.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Process Safety Engineer to join our team in Houston, TX with travel to site as required by Supervisor.  This role reports to the Manager, Process Safety and will be responsible for ensuring that operations are conducted safely, efficiently, and effectively.

This position is located in our Downtown Houston office and is a Monday - Friday in-office positions.

Key Responsibilities/Accountabilities:

• Provide technical and engineering leadership on all process safety management elements such as MOC, PSSR, PHA, building siting, process design.
• Provide process safety and engineering guidance to communicate and evaluate process safety risks.
• Ability to recommend and implement process safety improvement opportunities by staying abreast of industry trends and technology.
• Day to day guidance of Process Safety Barrier Health reporting.
• Responsible for management/leadership on PHA/LOPA teams, including review and approval of associated action items.
• Responsible for leadership in process safety event (PSE) investigations.
• Assist in developing and delivering training programs, keeping them updated in accordance with changes in technology and industry best practices.
• Responsible for providing technical assurance on overall operational risk. These processes include:
• Car sealing
• Procedures – initial start-up and SOP and red line revisions
• Process Safety Event Reporting
• 5-why or root cause analysis (RCA)
• Permit to Work
• SIMOPs
• Inhibits / Bypasses 
• Safety Critical Element management
• Pre-startup Safety Reviews
• Monitoring process safety metrics and analyzing data to identify trends and outliers and to make recommendations as needed.
• Participate in Pre-Start-Up / Readiness Reviews for major equipment commissioning activities.
• Participate in Go-no-Go reviews.
• Ability to interface with Contractor CSU team, engineering, and operations departments.
• Ability to influence the culture of process safety.

Basic Qualifications:

• Bachelor’s degree in Chemical/Process or Mechanical Engineering. Based on experience, other Engineering disciplines will be considered.
• 7-10 years of experience with preference in LNG or oil and gas. Other industry experience will be considered.
• Experience in design, implementation and management of safety systems and processes.
• Strong understanding of safety regulations and best industry practices/codes with demonstrated application.
• Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing status.

Key Characteristics:

• Forward thinking with the ability to identify improvement opportunities, proactively engaging all sites.
• Asks targeted questions to ensure that the right solutions are discussed and implemented.
• Result oriented.
• Clear communicator – ability to provide clear guidance and expectations.
• Ability to communicate the process safety message in a respectful manner, taking into consideration ideas from others.
• Ability to mentor and coach junior engineers.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. 

We are seeking Principal Engineer, Mechanical to join our team in Houston. This position is a Monday - Friday in-office. 

Responsibilities:

• Lead engineering design, scope refinement, cost estimating, development of project design specifications, and support construction
• Oversee project activities of third party project managers, engineers, construction managers, inspectors, and contractors
• Influence decisions that improve reliability and operability, reduce operating costs, and create a sustainable competitive advantage
• Translate project plans into coherent, credible, realistic project schedules
• Specifying equipment and major materials for procurement
• Providing in the field construction assistance
• Understand industry standards, applicable regulatory codes and requirements, and company standards
• Single point accountability for the technical execution and related aspects to achieve project objectives and business intent
• Ensure overall project technical quality and conformance to plan (scope, budget & schedule).
• Support Change Management functions, Value Improvement Practices, Bid Evaluations, Process and Implementation studies

Qualifications:

• Bachelor of Science degree in Engineering from an accredited university
• Minimum of twelve years combined experience in Design, Commissioning, or Operations of Cryogenic Processes
• Minimum of five years multi-discipline engineering management experience
• Experience in LNG liquefaction facilities highly preferred
• Ability to perform multiple tasks and work within project deadlines, and adjust as priorities changes occur
• Possess the ability to mentor others through technical training and guidance on planning, scheduling, and engineering subjects
• Have the ability to read and interpret engineer drawings to include P&IDs, PFDs, C&Es, One Line Diagrams, Isometrics, and Civil/Structural drawings
• Broad knowledge of Codes, Standards, and Industry Best Practices
• Exhibit excellent written and oral communication skills
• Have advanced computer experience with Microsoft Office, Microsoft Projects, PowerPoint, and Excel

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. 

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a leader to join us as a Senior Engineer, Piping. The Senior Piping Engineer is responsible for analyzing and overseeing the design of piping systems ensuring that the systems are efficient, safe and meet all regulatory standards. This position will be located in Houston, TX.  Travel may be required depending on project location. This is an in office position Monday-Friday schedule.

Responsibilities:

Project Leadership:

• Responsible for the entire piping scope on assigned projects, including work done in overseas offices. 
• Responsible for all subsections of the piping discipline including, stress analysis, material specification, design and material take-off.
• Develop, oversee, and ensure adherence to project timelines, budgets, and deliverables.
• Track and report progress during project execution.
• Coordinate with project managers, engineers, and clients to clarify scope and objectives.

Piping Design and Engineering:

• Provide guidance on complex piping systems using best engineering practices.
• Review piping layouts, isometrics, and 3D models as well as the work performed by overseas offices.
• Ensure compliance with project specifications, standards, codes (ASME, API), and best practices.
• Conduct stress analysis, material selection, and pipe routing optimization.
• Provide procurement support for piping items (specialty items, pipe supports, valves, etc.).
• Ensure the check and release of various piping deliverables/documents for use by downstream parties.

Team Supervision:

• Supervise, mentor and provide guidance to junior designers and drafters.
• Conduct regular design reviews and ensure alignment across disciplines.
• Foster a collaborative and efficient team environment.

Coordination and Communication:

• Liaise with other engineering disciplines (civil, structural, mechanical, electrical, instrumentation, process safety) to ensure seamless integration of piping systems.
• Review and approve vendor drawings.
• Participate in design reviews, HAZOP studies, and project presentations.
• Address technical queries and manage design changes effectively.

Quality Assurance:

• Implement quality control measures and conduct regular design audits.
• Ensure deliverables meet project and regulatory standards.
• Address any issues or risks that could impact project delivery

Qualifications:

Education and Experience:

• Bachelor’s degree in mechanical engineering (preferred).
• 10+ years of experience in piping layout, design and or engineering in the petrochemical industry, with at least 3 years in a leadership role.

Technical Skills:

• Proficiency in design review software like SmartPlant Review and Navisworks.
• Strong knowledge of piping codes and standards (ASME, ANSI, API, and PIP).
• Proficiency in material identification and selection.
• Strong knowledge of Cesar II and pipe stress analysis reports for all common systems of piping.
• Experience with LNG projects is preferred.
• Strong knowledge of AIV and FIV principles and screening is preferred
• Proficiency in development of piping material class specifications is preferred
• Strong knowledge in NDE and testing requirements of piping systems is preferred
• Proficiency in valve application and specification is preferred

Leadership and Communication:

• Proven ability to lead and mentor teams.
• Excellent communication, problem-solving, and decision-making skills.
• Strong organizational skills and ability to manage multiple priorities.

 Additional Skills:

• • Familiarity with construction and installation practices.
  • Understanding of project management principles.
  • Experience with international projects and multicultural teams is a plus.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Process Safety - Senior Engineer to join our team in Houston, TX with travel to site as required by Supervisor.  This role reports to the Manager, Process Safety and will be responsible for ensuring that operations are conducted safely, efficiently, and effectively.

Key Responsibilities/Accountabilities:

• Provide technical and engineering leadership on all process safety management elements such as MOC, PSSR, PHA, building siting, process design.
• Provide process safety and engineering guidance to communicate and evaluate process safety risks.
• Ability to recommend and implement process safety improvement opportunities by staying abreast of industry trends and technology.
• Day to day guidance of Process Safety Barrier Health reporting.
• Responsible for management/leadership on PHA/LOPA teams, including review and approval of associated action items.
• Responsible for leadership in process safety event (PSE) investigations.
• Assist in developing and delivering training programs, keeping them updated in accordance with changes in technology and industry best practices.
• Responsible for providing technical assurance on overall operational risk. These processes include:
• Car sealing
• Procedures – initial start-up and SOP and red line revisions
• Process Safety Event Reporting
• 5-why or root cause analysis (RCA)
• Permit to Work
• SIMOPs
• Inhibits / Bypasses 
• Safety Critical Element management
• Pre-startup Safety Reviews
• Monitoring process safety metrics and analyzing data to identify trends and outliers and to make recommendations as needed.
• Participate in Pre-Start-Up / Readiness Reviews for major equipment commissioning activities.
• Participate in Go-no-Go reviews.
• Ability to interface with Contractor CSU team, engineering, and operations departments.
• Ability to influence the culture of process safety.

Basic Qualifications:

• Bachelor’s degree in Chemical/Process or Mechanical Engineering. Based on experience, other Engineering disciplines will be considered.
• 7-15 years of experience with preference in LNG or oil and gas. Other industry experience will be considered.
• Experience in design, implementation and management of safety systems and processes.
• Strong understanding of safety regulations and best industry practices/codes with demonstrated application.
• Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing status.

Key Characteristics:

• Forward thinking with the ability to identify improvement opportunities, proactively engaging all sites.
• Asks targeted questions to ensure that the right solutions are discussed and implemented.
• Result oriented.
• Clear communicator – ability to provide clear guidance and expectations.
• Ability to communicate the process safety message in a respectful manner, taking into consideration ideas from others.
• Ability to mentor and coach junior engineers.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Critical Systems Engineer

EdgeConneX is in search for its next Critical Systems Engineer.  The Critical Systems Engineer is a member of the Operations Support team and provides Level 2 escalation support from our Critical Systems Coordinators. This role brings deep expertise in mission-critical electrical and mechanical infrastructure and supports the reliability, safety, and efficiency of EdgeConneX data centers. The CSE serves as a technical authority for the maintenance and operational oversight of critical systems, collaborating closely with critical systems teams, field operations, vendors, and corporate engineering teams to ensure reliability, safety, and consistency across data center operations. This position reports to the Critical Systems Manager and can be based in the cities listed in our posting.  This position will require up to 25% travel to support various maintenance initiatives and trainings.

Primary Responsibilities

• Support preventive and corrective maintenance programs across data centers
• Support reliability improvement initiatives and operational readiness activities, including review of system performance, equipment reliability trends, and process effectiveness
• Manage and participate in post-event root cause analysis (RCA) processes to support continuous improvement
• Create, review, and approve Methods of Procedure (MOPs)
• Support the development and maintenance of Standard Operating Procedures (SOPs) and Emergency Operating Procedures (EOPs)
• Implement and manage field-related projects as required
• Identify opportunities for facility improvements, including efficiency and PUE optimization
• Ensure compliance with applicable codes, regulations, and company directives
• Provide escalation support and technical consultation as required
• Perform other duties as assigned by management
• Manage vendor maintenance activities and ensure SLA compliance

CMMS / Asset Manager Responsibilities

• Ensure complete and accurate asset sheets are delivered in Asset Manager from the Construction Management and/or Engineering Team
• Validate and correct asset data, including ELI codes, serial numbers, and model numbers
• Determine contact information for maintenance vendors and manufacturers as needed
• Map equipment to maintenance vendors and ensure maintenance contracts are in place
• Work with Site Engineers to determine maintenance schedules and activities
• Load assets and maintenance schedules into CMMS

Knowledge, Skills, and Abilities

• Strong understanding of mission-critical data center equipment
• Adept in troubleshooting and support of electrical systems: UPS, generators, switchgear
• Adept in troubleshooting and support of mechanical systems: air handlers, rooftop units, pumps, fans
• Fire alarm and suppression systems (FIKE) & Building Management Systems (BMS)
• Preventive maintenance program creation and execution
• Working knowledge of DCIM and CMMS systems
• Proficiency with Microsoft Word and Excel
• Strong organizational, prioritization, and multitasking skills
• Ability to clearly communicate technical information verbally and in writing
• Capable of leading and managing vendors, technicians, and cross-functional teams
• Candidates who also have a general IT awareness of servers, networking, and peripheral equipment are highly encouraged to apply

Education and Experience

• 5–8 years of professional relevant mission-critical MEP experience
• Hands-on experience with data centers, critical facilities, UPS systems, emergency generators, or electrical switchgear
• Bachelor’s degree or equivalent practical experience
• Candidates who either possess a degree or Industrial Technology trade school certification along with verifiable technical training are highly encouraged to apply

Travel

This position can be located at any number of our EdgeConneX Data Center facilities and will require regular travel (approximately 25%) to manage additional Data Centers across North America.  There will also be travel for annual and quarterly company meetings. 

Position Summary: 

Seeking a driven and motivated engineer to join our sales team focusing on growing business with existing customers and developing new business. This position will involve applications engineering, sales support and field service work. Sales Engineers should be comfortable working in a result-driven, fast-paced environment. 

Position will involve extensive formalized training plus work under a mentor, developing skills and gaining an understanding of CaptiveAire products, how we go to market, application engineering processes etc. as well as business development and sales strategies. This position will require some travel for training.

Why Work for CaptiveAire? 

• Nation’s leading manufacturer of commercial kitchen ventilation systems, and now offering a complete solution of fans, heaters, ductwork and HVAC equipment.  Our primary purpose is to provide fully integrated, sustainable HVAC Systems.
• Leader in the industry for over 40 years with innovative technologies, unmatched service, competitive pricing, and rapid lead times.
• Mission: to provide the highest quality products and service to our users at the lowest possible price
• Strong commitment to the development of our employees, including continuous education opportunities like sponsorship for Professional Engineering license and continuous education through weekly webinars and company developed technical videos 

What our employees have to say: 

There is never a day you don’t learn something new at CaptiveAire. I am able to learn something new due to the freedom to take on new tasks independently and problem solve. 

I love the mindset of continuous learning and pushing the bounds of your capabilities and knowledge. I love the people I work with and the  in-office environment.  I love how Captiveaire is all about connections, with customers, coworkers, end users, and everyone in between.  

One of the things I appreciate most about CaptiveAire is how strongly it embodies the entrepreneurial spirit. I’m empowered with the autonomy to manage my work independently, while also benefiting from the robust support and resources of a large, well-established company. 

CaptiveAire is fast-moving and no-nonsense. We operate differently than any other company that I've worked for with our decentralized structure. Quick action is taken when a good idea is presented. We are focused on end users where the rest of the industry is very short-sighted. We are on the front lines, actively changing the landscape of the HVAC industry. 

Learn more about CaptiveAire and our products here 

A Day in the Life: 

A technical sales role encompasses a wide variety of tasks where one day does not look exactly like the next. The projects our team handles are high in volume and unique from one another, spanning throughout the whole course of design, procurement, coordination, and post-sale support. 

Typical tasks include:

• Outside sales meetings and calls to build relationships with existing and new customers
• Application engineering to apply our products using sound engineering principles 
• Project management of installations in progress - Managing schedules/plans to guarantee we can get equipment on site when the site needs it, in turn creating satisfied and returning customers. 
• Service and technical support of existing equipment 
• Supporting end users to maintain high levels of customer service, from assisting contractors with wiring on site to remote troubleshooting for staff in the kitchen. 

Two to three full days per week in the office working on bids, one to two days on job sites, and dedicate another day to developing the territory. Territory development may include giving presentations to the engineering community, visiting new customers, or expanding contacts with an existing account.

Comments from some of our sales engineers:  

Every day I get to help someone. Whether it's an engineer with a design, a contractor with a troubleshooting issue, or an end user looking for help to obtain better indoor air quality. I get to use my engineering skills, people skills and business skills every day. 

Our main "role" is not to sell products but to provide solutions - kitchen ventilation solutions, commercial ventilation solutions, heating/air conditioning solutions. I enjoy getting to work directly with end users and helping them complete their business goals. Attending a soft opening after completing a full design-build project with an owner is rewarding. 

I love the balance between working on designs in the office and also having that face to face interaction with our customers. It's awesome to handle the design phase of a project, then also take charge of the procurement process with the end user/customer and lastly watch our equipment perform as designed once installed and the project is complete. I also love the growth aspect of my role, I enjoy molding and shaping our business in order to set it up for success and then see the value we are adding to the market. 

Primary Job Responsibilities: 

• Provide integrated application engineering and design support for a wide range of ventilation applications with the goal of providing sustainable products and the latest technologies best designed to meet the customers’ needs. 
• Work directly with Engineers, Contractors, End Users, and Food Service Dealers. 
• Daily tasks include inside sales support, application engineering and outside sales. 
• Responsibilities will vary and may include presentations, quotes, submittals, technical product support, job site visits and hands on troubleshooting as needed. 
• Educate and promote CaptiveAire products to users in your market.  This includes conference calls, meetings, organizing presentations, and product demos. 
• Research and develop new business opportunities with new and existing users. 
• Top notch customer service and willingness to go above and beyond to serve the customer. 
• Quick turnaround times a priority.  
• Continuously evaluate and improve processes as well as the customer experience. 

Required skills: 

• 0-5 years experience 
• 4 year technical degree in a mechanical, electrical, construction or science-oriented curriculum preferred 
• Excellent computer, organizational and communication/presentation skills 
• Problem solving with a passion for continuous learning 
• Strong desire to interface with the customer 
• Embrace new technologies and business savvy 
• Passion for work with aggressive nature to succeed 
• Willing to travel for various training opportunities 
• If not already completed, expectation of FE Exam completion in area of study for engineering graduates within 6 months of employment with CaptiveAire
• MUST BE A “GO GETTER”! 

Benefits: 

• Medical, dental and vision insurance 
• Disability & life insurance based upon election of medical insurance 
• 401k with employer match 
• Paid holidays 
• Paid time off (PTO) based upon tenure 
• Flexible spending account (FSA) 
• Tuition reimbursement, including for Professional Engineering (PE) License  
• Relocation assistance 

 
Salary: 

$70k-$100k base, negotiable dependent on experience, with additional monthly bonus based on productivity and profits.  

Captive-Aire Systems, Inc. is proud to be an equal opportunity workplace. We review applications for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, citizenship, age, uniformed services, genetic information, physical or mental disability, medical condition, marital status, or any other basis prohibited by law. 

To qualify, applicants must be legally authorized to work in the United States. At this time, we are not able to consider applicants that require sponsorship, now or in the future, for employment visa status. 

#P1

#LI-TL1

What The Role Is

Reporting to the Manager of Project Engineering, the Project Engineer is responsible for managing the review, coordination, and approval of the detailed design package for Clearway Energy Group’s pipeline of solar and energy storage projects throughout the U.S. As part of the Engineering & Strategic Procurement department, the Project Engineer will also work with internal and external personnel to provide optimized designs, participate in the negotiation and execution of key contract exhibits, and support construction and commissioning activities by reviewing and approving commissioning test reports. The Project Engineer will work closely with Clearway Energy’s internal departments, including Origination, Development, Development Engineering, Construction, Procurement, Project Finance, and O&M; as well as with EPC contractors, Independent Engineers, financing parties, and other consultants, contractors, and stakeholders as needed.

This is a hybrid role based in one of our office locations in San Francisco, San Diego, Scottsdale, Houston, or Denver.

If you don’t meet 100% of the qualifications but see yourself contributing, please submit your resume.

What You'll Be Doing

• Technical lead and primary design and engineering point of contact for the Development and Construction teams, supporting intermediate- to advanced-stage development of utility-scale PV, PV+Storage, and stand-alone energy storage projects.
• Manage all resources, internally or externally, as necessary to obtain or review final site due diligence required to finalize scope, project costs, schedule, energy output, and risks with an independent EPC contractor or developer.
• Review engineering deliverables to ensure the final design meets contractual, cost, and performance requirements for our customers and financing partners.
• Develop, refine, or evaluate energy input assessments and power output expectations. Perform or oversee analyses to optimize site layouts, engineering design, and equipment selection to maximize performance and minimize lifecycle costs.
• Direct activities of designers, consultants, and contractors, and manage meetings and conference calls to achieve efficient use of resources, meet deadlines for deliverables, minimize delays, avoid crises, and resolve conflicts.
• Write, edit, and/or review technical scope of work documents, specifications, procedures, site reports, progress reports, feasibility studies, proposals, presentations, etc. Review and negotiate technical aspects of EPC contracts, interconnect agreements, etc.
• Coordinate with the Development team and external consultants to deliver energy resource predictions and production simulations, shading studies, electrical schematics, plant plans and equipment layouts, system cost estimates, EPC contracts, technical exhibits, etc.
• Review, manage, and maintain contractor deliverables during construction to meet critical contractual and financing milestones, including site, civil, structural, and electrical plans, permitting, and construction documents.
• Support construction as a technical escalation point and owner’s representative to mitigate delays and scope creep to maintain schedules and budgets.
• Represent Clearway (CEG) in interviews, meetings, and negotiations with clients, project developers, suppliers, consultants, utilities, and regulatory authorities.

What You'll Bring

• B.S. degree in mechanical, electrical, or civil engineering, or related subject.
• M.S. degree and/or P.E. desirable.
• Minimum 2+ years of solar/BESS industry experience, including 1+ year of direct EPC experience completing the detailed design, permitting, and construction of solar projects, and 1+ year of storage experience.
• Understanding solar and storage project design, optimization trade-offs, and familiarity with the current solar and storage market, equipment suppliers, contractors, typical technical specifications, and costs.
• Experience with solar and storage project financing and independent engineer requirements.
• Understanding of solar and storage energy estimates, losses, assumptions, and standards.
• Experience with review and negotiation of engineering, procurement, and construction contracts and technical exhibits for solar and storage facilities.
• Experience managing consultants and contractors.
• Working knowledge of relevant U.S. and IEC equipment standards, codes, and construction practices.
• Detail-oriented and self-motivated with the ability to perform in a dynamic and collaborative working environment.
• Ability and willingness to travel (~20%) and occasionally to work after hours on short notice, when necessary.
• Proven ability to organize and prioritize work, manage relationships with clients, colleagues, consultants, and contractors.
• Excellent written and verbal communication, mathematical abilities, analytical and creative design skills, and problem-solving skills; team-oriented with the ability to work alone when needed.

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Hybrid

What The Role Is

Reporting to the Manager of Project Engineering, the Project Engineer is responsible for managing the review, coordination, and approval of the detailed design package for Clearway Energy Group’s pipeline of solar and energy storage projects throughout the U.S. As part of the Engineering & Strategic Procurement department, the Project Engineer will also work with internal and external personnel to provide optimized designs, participate in the negotiation and execution of key contract exhibits, and support construction and commissioning activities by reviewing and approving commissioning test reports. The Project Engineer will work closely with Clearway Energy’s internal departments, including Origination, Development, Development Engineering, Construction, Procurement, Project Finance, and O&M; as well as with EPC contractors, Independent Engineers, financing parties, and other consultants, contractors, and stakeholders as needed.

This is a hybrid role based in one of our office locations in San Francisco, San Diego, Scottsdale, Houston, or Denver.

If you don’t meet 100% of the qualifications but see yourself contributing, please submit your resume.

What You'll Be Doing

• Technical lead and primary design and engineering point of contact for the Development and Construction teams, supporting intermediate- to advanced-stage development of utility-scale PV, PV+Storage, and stand-alone energy storage projects.
• Manage all resources, internally or externally, as necessary to obtain or review final site due diligence required to finalize scope, project costs, schedule, energy output, and risks with an independent EPC contractor or developer.
• Review engineering deliverables to ensure the final design meets contractual, cost, and performance requirements for our customers and financing partners.
• Develop, refine, or evaluate energy input assessments and power output expectations. Perform or oversee analyses to optimize site layouts, engineering design, and equipment selection to maximize performance and minimize lifecycle costs.
• Direct activities of designers, consultants, and contractors, and manage meetings and conference calls to achieve efficient use of resources, meet deadlines for deliverables, minimize delays, avoid crises, and resolve conflicts.
• Write, edit, and/or review technical scope of work documents, specifications, procedures, site reports, progress reports, feasibility studies, proposals, presentations, etc. Review and negotiate technical aspects of EPC contracts, interconnect agreements, etc.
• Coordinate with the Development team and external consultants to deliver energy resource predictions and production simulations, shading studies, electrical schematics, plant plans and equipment layouts, system cost estimates, EPC contracts, technical exhibits, etc.
• Review, manage, and maintain contractor deliverables during construction to meet critical contractual and financing milestones, including site, civil, structural, and electrical plans, permitting, and construction documents.
• Support construction as a technical escalation point and owner’s representative to mitigate delays and scope creep to maintain schedules and budgets.
• Represent Clearway (CEG) in interviews, meetings, and negotiations with clients, project developers, suppliers, consultants, utilities, and regulatory authorities.

What You'll Bring

• B.S. degree in mechanical, electrical, or civil engineering, or related subject.
• M.S. degree and/or P.E. desirable.
• Minimum 2+ years of solar/BESS industry experience, including 1+ year of direct EPC experience completing the detailed design, permitting, and construction of solar projects, and 1+ year of storage experience.
• Understanding solar and storage project design, optimization trade-offs, and familiarity with the current solar and storage market, equipment suppliers, contractors, typical technical specifications, and costs.
• Experience with solar and storage project financing and independent engineer requirements.
• Understanding of solar and storage energy estimates, losses, assumptions, and standards.
• Experience with review and negotiation of engineering, procurement, and construction contracts and technical exhibits for solar and storage facilities.
• Experience managing consultants and contractors.
• Working knowledge of relevant U.S. and IEC equipment standards, codes, and construction practices.
• Detail-oriented and self-motivated with the ability to perform in a dynamic and collaborative working environment.
• Ability and willingness to travel (~20%) and occasionally to work after hours on short notice, when necessary.
• Proven ability to organize and prioritize work, manage relationships with clients, colleagues, consultants, and contractors.
• Excellent written and verbal communication, mathematical abilities, analytical and creative design skills, and problem-solving skills; team-oriented with the ability to work alone when needed.

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Hybrid

What The Role Is

Reporting to the Manager of Project Engineering, the Project Engineer is responsible for managing the review, coordination, and approval of the detailed design package for Clearway Energy Group’s pipeline of solar and energy storage projects throughout the U.S. As part of the Engineering & Strategic Procurement department, the Project Engineer will also work with internal and external personnel to provide optimized designs, participate in the negotiation and execution of key contract exhibits, and support construction and commissioning activities by reviewing and approving commissioning test reports. The Project Engineer will work closely with Clearway Energy’s internal departments, including Origination, Development, Development Engineering, Construction, Procurement, Project Finance, and O&M; as well as with EPC contractors, Independent Engineers, financing parties, and other consultants, contractors, and stakeholders as needed.

This is a hybrid role based in one of our office locations in San Francisco, San Diego, Scottsdale, Houston, or Denver.

If you don’t meet 100% of the qualifications but see yourself contributing, please submit your resume.

What You'll Be Doing

• Technical lead and primary design and engineering point of contact for the Development and Construction teams, supporting intermediate- to advanced-stage development of utility-scale PV, PV+Storage, and stand-alone energy storage projects.
• Manage all resources, internally or externally, as necessary to obtain or review final site due diligence required to finalize scope, project costs, schedule, energy output, and risks with an independent EPC contractor or developer.
• Review engineering deliverables to ensure the final design meets contractual, cost, and performance requirements for our customers and financing partners.
• Develop, refine, or evaluate energy input assessments and power output expectations. Perform or oversee analyses to optimize site layouts, engineering design, and equipment selection to maximize performance and minimize lifecycle costs.
• Direct activities of designers, consultants, and contractors, and manage meetings and conference calls to achieve efficient use of resources, meet deadlines for deliverables, minimize delays, avoid crises, and resolve conflicts.
• Write, edit, and/or review technical scope of work documents, specifications, procedures, site reports, progress reports, feasibility studies, proposals, presentations, etc. Review and negotiate technical aspects of EPC contracts, interconnect agreements, etc.
• Coordinate with the Development team and external consultants to deliver energy resource predictions and production simulations, shading studies, electrical schematics, plant plans and equipment layouts, system cost estimates, EPC contracts, technical exhibits, etc.
• Review, manage, and maintain contractor deliverables during construction to meet critical contractual and financing milestones, including site, civil, structural, and electrical plans, permitting, and construction documents.
• Support construction as a technical escalation point and owner’s representative to mitigate delays and scope creep to maintain schedules and budgets.
• Represent Clearway (CEG) in interviews, meetings, and negotiations with clients, project developers, suppliers, consultants, utilities, and regulatory authorities.

What You'll Bring

• B.S. degree in mechanical, electrical, or civil engineering, or related subject.
• M.S. degree and/or P.E. desirable.
• Minimum 2+ years of solar/BESS industry experience, including 1+ year of direct EPC experience completing the detailed design, permitting, and construction of solar projects, and 1+ year of storage experience.
• Understanding solar and storage project design, optimization trade-offs, and familiarity with the current solar and storage market, equipment suppliers, contractors, typical technical specifications, and costs.
• Experience with solar and storage project financing and independent engineer requirements.
• Understanding of solar and storage energy estimates, losses, assumptions, and standards.
• Experience with review and negotiation of engineering, procurement, and construction contracts and technical exhibits for solar and storage facilities.
• Experience managing consultants and contractors.
• Working knowledge of relevant U.S. and IEC equipment standards, codes, and construction practices.
• Detail-oriented and self-motivated with the ability to perform in a dynamic and collaborative working environment.
• Ability and willingness to travel (~20%) and occasionally to work after hours on short notice, when necessary.
• Proven ability to organize and prioritize work, manage relationships with clients, colleagues, consultants, and contractors.
• Excellent written and verbal communication, mathematical abilities, analytical and creative design skills, and problem-solving skills; team-oriented with the ability to work alone when needed.

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Hybrid

What The Role Is

Reporting to the Manager of Project Engineering, the Project Engineer is responsible for managing the review, coordination, and approval of the detailed design package for Clearway Energy Group’s pipeline of solar and energy storage projects throughout the U.S. As part of the Engineering & Strategic Procurement department, the Project Engineer will also work with internal and external personnel to provide optimized designs, participate in the negotiation and execution of key contract exhibits, and support construction and commissioning activities by reviewing and approving commissioning test reports. The Project Engineer will work closely with Clearway Energy’s internal departments, including Origination, Development, Development Engineering, Construction, Procurement, Project Finance, and O&M; as well as with EPC contractors, Independent Engineers, financing parties, and other consultants, contractors, and stakeholders as needed.

This is a hybrid role based in one of our office locations in San Francisco, San Diego, Scottsdale, Houston, or Denver.

If you don’t meet 100% of the qualifications but see yourself contributing, please submit your resume.

What You'll Be Doing

• Technical lead and primary design and engineering point of contact for the Development and Construction teams, supporting intermediate- to advanced-stage development of utility-scale PV, PV+Storage, and stand-alone energy storage projects.
• Manage all resources, internally or externally, as necessary to obtain or review final site due diligence required to finalize scope, project costs, schedule, energy output, and risks with an independent EPC contractor or developer.
• Review engineering deliverables to ensure the final design meets contractual, cost, and performance requirements for our customers and financing partners.
• Develop, refine, or evaluate energy input assessments and power output expectations. Perform or oversee analyses to optimize site layouts, engineering design, and equipment selection to maximize performance and minimize lifecycle costs.
• Direct activities of designers, consultants, and contractors, and manage meetings and conference calls to achieve efficient use of resources, meet deadlines for deliverables, minimize delays, avoid crises, and resolve conflicts.
• Write, edit, and/or review technical scope of work documents, specifications, procedures, site reports, progress reports, feasibility studies, proposals, presentations, etc. Review and negotiate technical aspects of EPC contracts, interconnect agreements, etc.
• Coordinate with the Development team and external consultants to deliver energy resource predictions and production simulations, shading studies, electrical schematics, plant plans and equipment layouts, system cost estimates, EPC contracts, technical exhibits, etc.
• Review, manage, and maintain contractor deliverables during construction to meet critical contractual and financing milestones, including site, civil, structural, and electrical plans, permitting, and construction documents.
• Support construction as a technical escalation point and owner’s representative to mitigate delays and scope creep to maintain schedules and budgets.
• Represent Clearway (CEG) in interviews, meetings, and negotiations with clients, project developers, suppliers, consultants, utilities, and regulatory authorities.

What You'll Bring

• B.S. degree in mechanical, electrical, or civil engineering, or related subject.
• M.S. degree and/or P.E. desirable.
• Minimum 2+ years of solar/BESS industry experience, including 1+ year of direct EPC experience completing the detailed design, permitting, and construction of solar projects, and 1+ year of storage experience.
• Understanding solar and storage project design, optimization trade-offs, and familiarity with the current solar and storage market, equipment suppliers, contractors, typical technical specifications, and costs.
• Experience with solar and storage project financing and independent engineer requirements.
• Understanding of solar and storage energy estimates, losses, assumptions, and standards.
• Experience with review and negotiation of engineering, procurement, and construction contracts and technical exhibits for solar and storage facilities.
• Experience managing consultants and contractors.
• Working knowledge of relevant U.S. and IEC equipment standards, codes, and construction practices.
• Detail-oriented and self-motivated with the ability to perform in a dynamic and collaborative working environment.
• Ability and willingness to travel (~20%) and occasionally to work after hours on short notice, when necessary.
• Proven ability to organize and prioritize work, manage relationships with clients, colleagues, consultants, and contractors.
• Excellent written and verbal communication, mathematical abilities, analytical and creative design skills, and problem-solving skills; team-oriented with the ability to work alone when needed.

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Hybrid

What The Role Is

Reporting to the Manager of Project Engineering, the Project Engineer is responsible for managing the review, coordination, and approval of the detailed design package for Clearway Energy Group’s pipeline of solar and energy storage projects throughout the U.S. As part of the Engineering & Strategic Procurement department, the Project Engineer will also work with internal and external personnel to provide optimized designs, participate in the negotiation and execution of key contract exhibits, and support construction and commissioning activities by reviewing and approving commissioning test reports. The Project Engineer will work closely with Clearway Energy’s internal departments, including Origination, Development, Development Engineering, Construction, Procurement, Project Finance, and O&M; as well as with EPC contractors, Independent Engineers, financing parties, and other consultants, contractors, and stakeholders as needed.

This is a hybrid role based in one of our office locations in San Francisco, San Diego, Scottsdale, Houston, or Denver.

If you don’t meet 100% of the qualifications but see yourself contributing, please submit your resume.

What You'll Be Doing

• Technical lead and primary design and engineering point of contact for the Development and Construction teams, supporting intermediate- to advanced-stage development of utility-scale PV, PV+Storage, and stand-alone energy storage projects.
• Manage all resources, internally or externally, as necessary to obtain or review final site due diligence required to finalize scope, project costs, schedule, energy output, and risks with an independent EPC contractor or developer.
• Review engineering deliverables to ensure the final design meets contractual, cost, and performance requirements for our customers and financing partners.
• Develop, refine, or evaluate energy input assessments and power output expectations. Perform or oversee analyses to optimize site layouts, engineering design, and equipment selection to maximize performance and minimize lifecycle costs.
• Direct activities of designers, consultants, and contractors, and manage meetings and conference calls to achieve efficient use of resources, meet deadlines for deliverables, minimize delays, avoid crises, and resolve conflicts.
• Write, edit, and/or review technical scope of work documents, specifications, procedures, site reports, progress reports, feasibility studies, proposals, presentations, etc. Review and negotiate technical aspects of EPC contracts, interconnect agreements, etc.
• Coordinate with the Development team and external consultants to deliver energy resource predictions and production simulations, shading studies, electrical schematics, plant plans and equipment layouts, system cost estimates, EPC contracts, technical exhibits, etc.
• Review, manage, and maintain contractor deliverables during construction to meet critical contractual and financing milestones, including site, civil, structural, and electrical plans, permitting, and construction documents.
• Support construction as a technical escalation point and owner’s representative to mitigate delays and scope creep to maintain schedules and budgets.
• Represent Clearway (CEG) in interviews, meetings, and negotiations with clients, project developers, suppliers, consultants, utilities, and regulatory authorities.

What You'll Bring

• B.S. degree in mechanical, electrical, or civil engineering, or related subject.
• M.S. degree and/or P.E. desirable.
• Minimum 2+ years of solar/BESS industry experience, including 1+ year of direct EPC experience completing the detailed design, permitting, and construction of solar projects, and 1+ year of storage experience.
• Understanding solar and storage project design, optimization trade-offs, and familiarity with the current solar and storage market, equipment suppliers, contractors, typical technical specifications, and costs.
• Experience with solar and storage project financing and independent engineer requirements.
• Understanding of solar and storage energy estimates, losses, assumptions, and standards.
• Experience with review and negotiation of engineering, procurement, and construction contracts and technical exhibits for solar and storage facilities.
• Experience managing consultants and contractors.
• Working knowledge of relevant U.S. and IEC equipment standards, codes, and construction practices.
• Detail-oriented and self-motivated with the ability to perform in a dynamic and collaborative working environment.
• Ability and willingness to travel (~20%) and occasionally to work after hours on short notice, when necessary.
• Proven ability to organize and prioritize work, manage relationships with clients, colleagues, consultants, and contractors.
• Excellent written and verbal communication, mathematical abilities, analytical and creative design skills, and problem-solving skills; team-oriented with the ability to work alone when needed.

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Hybrid

As a Stationary Engineer within Corporate Advisory & Solutions, you will be responsible for the continuous operation, monitoring, and maintenance of building systems, including HVAC, boilers, chillers, electrical, and plumbing systems. This role focuses on maintaining optimal system performance through routine inspections, preventive maintenance, and timely response to operational issues to ensure safe, efficient, and uninterrupted building operations.

Essential Duties and Responsibilities:

• Operate, monitor, and maintain central plant systems, including boilers, chillers, cooling towers, air handling units, and associated equipment
• Perform scheduled preventive maintenance, inspections, and repairs on building systems and equipment
• Monitor building automation systems (BAS) and equipment readings; adjust controls to maintain optimal performance and efficiency
• Respond to and troubleshoot system alarms, equipment failures, and tenant service requests, escalating complex issues as needed
• Maintain accurate logs of equipment operation, inspections, and maintenance activities
• Ensure all systems are operating within established parameters and in compliance with safety and regulatory standards
• Support start-up, shutdown, and seasonal changeover of mechanical systems
• Assist with contractor coordination and oversight for specialized repairs and maintenance
• Conduct routine building and equipment inspections to identify deficiencies and recommend corrective actions
• Replace filters, belts, and other system components as required
• Follow company safety protocols and wear appropriate PPE; ensure compliance with OSHA, NEC, NFC, and NFPA regulations; report hazards and participate in safety programs
• Communicate effectively with tenants, vendors, property management, and internal teams to support efficient operations
• Provide guidance and support to junior technicians as needed
• Participate in ongoing training and professional development to enhance technical expertise
• Perform other duties as assigned

Qualifications:

• High school diploma or GED required
• Two to three years of related experience in building operations or central plant systems, or equivalent trade/certification experience
• Stationary engineering experience preferred
• Relevant licenses or certifications (e.g., Stationary Engineer license, CFC/EPA certification) preferred or willingness to obtain as required by local/state regulations
• Working knowledge of HVAC, electrical, plumbing, and mechanical systems, with an emphasis on central plant operations
• Experience with building automation systems (BAS) and equipment monitoring
• Basic proficiency with computer systems, including work order platforms and Microsoft Outlook
• Familiarity with fire/life safety systems and procedures
• Ability to read and interpret blueprints, technical manuals, and code requirements
• Strong troubleshooting and problem-solving skills
• Proven ability to communicate effectively with tenants, vendors, contractors, and internal teams
• Ability to work flexible hours, including after-hours, weekends, holidays, and emergency situations as needed
• Knowledge of tools, equipment, and safe work practices

Physical Requirements:

Ability to stand, walk, climb ladders, and lift up to 50 pounds; perform physically demanding tasks such as stooping, crouching, and kneeling.

This position is 100% in-office. The role requires working in office during standard business hours. Remote work or telecommuting is not an option for this position.

#IND123

POSITION SNAPSHOT

Atwell is looking for a Project Engineer with energy experience. Current projects include oil & natural gas, CO2, hydrogen, and RNG pipelines and facilities. 

The Project Engineer will achieve business objectives by developing opportunities, executing project work, and acting as the lead SME technical expert within the group.  In this role, the selected candidate will be expected to develop and demonstrate proficiency regarding the essential functions of the job found below.

ESSENTIAL FUNCTIONS

• Direct project team on various assignments as directed by the lead Project Manager providing technical guidance
• Recommend and implement design changes per the client’s request
• Communicate with clients, regulatory agencies, or public as needed:
• Respond to project inquiries.
• Serve as liaison between clients and project team members.
• Ensure team performance and provide leadership to project teams:
• Supervise, advise, and assist assigned project team members.
• Foster teamwork within project teams and other teams within the firm.
• Maintain professional and technical knowledge
• Establish personal networks.
• Participate in applicable professional societies and trade associations.
• Achieve team performance objectives as well as individual objectives..
• Work closely with other Energy teams within Atwell to take advantage of expertise and share resources.
• Willing to travel when necessary

EDUCATION

• Bachelor’s degree from accredited university in Electrical, Mechanical, Petroleum or related field required
• Professional License (PE) required 

DAY TO DAY

• As the Senior Project Engineer, you will manage the Engineering activities related to design for major Oil & Gas / Energy projects (pipelines & facilities) throughout the US and serve as a main point of contact
• You provide engineering technical input into projects at various stages (from feasibility/ preliminary to detailed design), coordinate Engineering design efforts with EPC or external consultants to review and comment on design submittals in coordination with support from Atwell subject matter experts and manage and ensure all deliverables meet Project specifications
• Additionally, you manage external engineering firms, subcontractors as well as various engineering disciplines (civil, mechanical, structural, etc.) to achieve the highest level of engineering and design for project execution and actively identify all critical risks, issues and impacts of the project specifically the adequate application of and adherence to corporate health & safety and environmental requirements
• Review/monitor contractors’ progress and monitor the progress relating to key project milestones
• Internal coordination with Development, Engineering, Permitting, GIS and Land group
• Assist procurement in running RFPs and managing the process to sub-contractors
• Develop, review, and refine electrical and instrumentation (E&I) designs for natural gas transmission facilities, ensuring compliance with technical specifications, safety standards, and industry regulations
• Project sites may include mainline valve stations, metering and regulating stations, pipelines, and compressor stations
• Collaborate with project teams to define requirements and produce basis of design documents and comprehensive E&I scope packages

#LI-TK1

Position Snapshot: Civil/Structural Engineer – Oil & Gas

Atwell is seeking a licensed Civil/Structural Engineer (PE) with experience supporting structural design and engineering for the Oil and Gas industry. Our current project portfolio includes oil and natural gas, CO₂, hydrogen, and renewable natural gas (RNG) pipelines, terminals, compressor stations, and processing facilities.

In this role, you will be responsible for leading and executing civil and structural engineering efforts, ensuring alignment with project scope, schedule, budgets, client expectations, and applicable codes and standards. This position involves developing engineering documentation from concept through construction, overseeing structural analyses, mentoring junior team members, and coordinating across disciplines to support successful project execution.

You will play a critical role in the design of reinforced concrete foundations, structural steel platforms and supports, equipment skids, and pipeline structural systems.

Roles and Responsibilities:

• Lead the civil and structural engineering design for oil and gas infrastructure projects, including pipelines, pump stations, compressor stations, terminals, and process facilities
• Develop construction documents, including structural plans, general arrangements, framing plans, and connection details for steel and concrete structures
• Conduct structural analysis under various loading conditions including wind, seismic, blast, and equipment loads in accordance with applicable codes (IBC, ASCE, AISC, ACI, API, etc.)
• Review and approve engineering calculations, drawings, and reports prepared by internal teams and subcontractors
• Collaborate with multidiscipline teams including mechanical, piping, and electrical to coordinate structural requirements across project phases
• Perform field visits to verify as-built conditions, gather site data, and provide construction support as needed
• Provide mentorship to junior engineers and support team development through technical leadership
• Monitor project schedules, budgets, and resource allocations to ensure deliverables are met on time and within scope
• Support quality assurance by implementing Atwell’s QA/QC procedures and best practices

Job Requirements:

• Bachelor’s degree in Civil or Structural Engineering from an ABET-accredited institution (Master’s a plus)
• Professional Engineer (PE) license required
• 7+ years of experience in civil/structural engineering for oil and gas facilities or similar industrial infrastructure
• Proficient in structural analysis software such as STAAD.Pro, RISA, SAP2000, or similar
• Working knowledge of CAD software tools including AutoCAD, CADWorx, and Civil 3D
• Familiarity with Autodesk Inventor, Navisworks, or Tekla Structures is a plus
• Strong knowledge of applicable design codes: AISC, ACI, ASCE, API, IBC
• Proficient in Microsoft Office Suite (Word, Excel, Outlook)

Pay Range - $100,000 - $145,000 base + end of year bonus. 

Disclaimer 

While AI tools may support your application process, this role is built on human talent. Your judgment, experience, and character matter most, so we encourage you to showcase what makes you uniquely you.

Atwell does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any Atwell employee. Resumes from approved vendors must be specifically requested by Atwell and approved by the Atwell Talent Acquisition Team.

#LI-TK1

Empower Your Future: At MetOx International, we’re pioneering the next era of energy security and abundance through breakthrough superconducting technology. As Senior Staff Mechanical Engineer, you’ll join a dynamic team committed to strengthening the world’s energy systems to make them more resilient, efficient, and reliable.

Based at our global headquarters in Houston, TX, the Senior Staff Mechanical serves as a recognized subject matter expert in the design and development of advanced MOCVD tooling. This role leads high-impact engineering programs and partners closely with leadership to solve complex technical challenges and advance MetOx’s next-generation manufacturing platforms. This engineer drives architecture, influences technical direction, and ensures delivery of robust, scalable equipment solutions aligned to process and manufacturing needs

Key Responsibilities

Technical Leadership (Tool Building & MOCVD)

• Drives architecture, design, and delivery of complex mechanical systems for MOCVD and related deposition platforms.
• Anticipates future design challenges and develops scalable, high-performance solutions.
• Guides design decisions across vacuum, thermal, and precision mechanical systems.
• Translates process and materials requirements into robust, manufacturable tool designs.
• Establishes and advances best practices in DFx (Design for Manufacturability, Assembly, Reliability).

Engineering Strategy

• Shapes development processes, design standards, and engineering best practices for tool building.
• Influences technical direction for MOCVD platform evolution and equipment roadmap.
• Identifies opportunities to improve system performance, reliability, and cost.
• Drives innovation in tool design to reduce technical risk and accelerate deployment.

Program Management & Execution

• Leads multi-team engineering initiatives from concept through build, integration, and production.
• Defines and manages project scope, timelines, and technical deliverables.
• Identifies and mitigates technical risks across complex programs.
• Partners with leadership to align engineering execution with company objectives.

Collaboration & Cross-Functional Impact

• Partners with Process, R&D, Manufacturing, and Equipment Engineering teams to ensure alignment between tool capability and process requirements.
• Leads resolution of complex, cross-functional technical issues.
• Communicates technical trade-offs, risks, and recommendations clearly to stakeholders.

Mentorship & Technical Culture

• Coaches and mentors engineers across teams and functions.
• Elevates technical rigor and fosters a culture of engineering excellence.
• Serves as a go-to expert for complex problem solving and design reviews.
• Supports development of engineering talent and technical capability across the organization.

Other duties as assigned.

Minimum Qualifications:  

• Bachelor’s degree in mechanical engineering or related field.

• 10 years of engineering experience.

• An advanced degree may be substituted for required experience on a year-for-year basis, depending on relevance and level.
• Prior experience designing or building MOCVD, PVD, or similar semiconductor or thin-film deposition equipment.
• Demonstrated expertise in vacuum systems, thermal systems, and precision mechanical design.

Preferred Qualifications: 

• Prior leadership of cross-functional technical initiatives.

Knowledge, Skills, & Abilities: 

• Applies systems-level thinking with strong business and operational awareness.
• Influences technical and strategic decisions through expertise and judgment.
• Navigates complexity and ambiguity while driving clear, actionable solutions.
• Communicates effectively across technical and non-technical stakeholders.
• Balances innovation with practical execution in a manufacturing environment.

Physical Demands: This position requires sitting at a desk and viewing a computer screen for extended periods while working or performing other office tasks. Ability to move around the office, including occasional standing, walking, and bending to retrieve documents, attend meetings, or use office equipment. Some light lifting may be required, up to 20 lbs.  

MetOx is proud to offer competitive benefits including:

• Health, dental, and vision available on the first day of employment
• 401(k) match
• Paid parental leave & adoption assistance
• Educational reimbursement
• And more!

We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

DH Pace Company, Inc., will hire an Outside Commercial Sales Representative to represent our Entry Door Division for our commercial line of business in Houston, Texas and surrounding areas. You will have the opportunity to sell the following doors and door related products: Specialty Doors, Automatic Operators, Hollow Metal Doors and Frames, Door Hardware, and Electrical Hardware. If you have a knack for sales and business development, please apply!

Position Overview:

You will have the opportunity to directly impact sales by cultivating new customers and fostering long-term relationships in Houston and surrounding areas.

• Call on commercial and industrial accounts meeting with decision makers to professionally present our commercial entry door product lines in an effort to engineer a door solution for customers such as schools, hospitals, industrial buildings, and municipalities
• Develop scope of work for each proposal and personally handle every detail from initial call to closing the sale; must be proficient with Windows based programs and sales tools
• Meet or exceed sales and gross profit performance standards
• Provide timely, accurate estimates and proposals
• Maintain and update Customer Relationship Management Systems (CRM) daily
• Other duties as assigned

Qualifications:

• Prefer a minimum three (3) years of outside sales experience calling on business to business – ideally calling on commercial accounts selling new construction and retrofit projects to both end-users and contractors; however, will consider other applicable experience, especially if “mechanical” type products have been sold
• Must possess a Valid Driver’s License
• Bachelor’s degree, highly preferred
• Possess an ability for technical applications and mechanical systems

#PaceID2