Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost

We are currently looking for qualified candidates for a Mechanical Engineer position. Will require experience with process equipment systems, in a manner in which equipment is operated, safety system design and compliance codes, and with facility troubleshooting as related to oil and gas production. 

Responsibilities:

• Perform job responsibilities as Lead Engineer, leading discipline on medium projects or assigned under the direction of the Department Manager and/or Project Engineer for larger projects
• Ensure adherence to project specifications, governing codes and standards, and good engineering practice
• Ensure adherence to project health, safety, security and environmental (HSSE) requirements as well as state and federal regulations
• Monitor the schedule, ensure that project objectives are met, monitor project controls and engineering execution within the approved budget
• Responsible for reporting on engineering, design and equipment development status to the Lead Mechanical Engineer, and performing monthly or bi-weekly assessments of progress
• Participate and contribute advanced level development of all phases of project engineering, including detail design and construction support
• Experience in development of upstream production facility drawings, checking process equipment system designs and participation in hazard reviews performed to API
• Develop the technical content of Mechanical equipment calculations, specifications and data sheets for inquiry and purchase. Ensure these documents are appropriately reviewed, approved, and transmitted
• Has direct communication with equipment manufacturers and works clarifications to resolution.
• Typical equipment includes Vessels, Heat Exchangers, Fired Equipment, HVAC, Pumps, Compressors.  General knowledge of applicable codes and standards.
• Procedure development including start-up, commissioning, operating and maintenance.
• Coordinate and incorporate project requirements and standards.
• Develop Mechanical Work Plans for the installation of equipment
• Initiate Project Deviation Notices that impact the mechanical specifications, effort-hour budget and/or schedule
• Coordinate and cooperate with the Engineers of other disciplines to ensure the smooth flow of all information, and to ensure alignment with project requirements and design basis
• Initiate and runs status meetings with the mechanical team to discuss project issues, coordinate/plan key milestone efforts, etc.
• Responsible for obtaining cost related information and developing scope of work documents for project estimates (e.g., TIC estimates)

Qualifications:

• Bachelor’s degree or Master’s degree in Mechanical Engineering from an accredited college or University
• 5+ years of overall experience on capital projects from feasibility through construction
• Familiarity with various project phases and the scope/deliverables required
• Advanced MS Office skills (Word, Excel, OneNote) preferred
• Excellent oral and written communication skills in English required
• Registered Professional Engineering license preferred
• Ability to train and travel to live facilities preferred

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. 

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a talented civil engineer to join our team who will produce engineering documents for the site preparation, grading, drainage, roads, and paving for our facilities.  This position will serve multiple roles with the goal of ensuring efficiently produced high quality civil engineering documents for our projects. The ideal candidate should be efficient, detail oriented, and able to keep track of multiple tasks with separate deadlines.

This position will report to the Civil Engineering Manager. This position is located in our Downtown Houston office and is a Monday-Friday in-office position.

Key Responsibilities:

• Develop calculations, quantities, reports, drawings, and specifications for the civil sitework scope of engineering of the project.  Seal and sign the final civil engineering documents.
• Collaborate with and support other disciplines, subconsultants, project controls, project management, and others
• Perform all functions within the civil engineering and design team as needed to create examples or meet deadlines

Qualifications:

• Bachelor's degree in Civil Engineering
• 2 to 5 years of relevant experience
• Sufficient experience and knowledge with oil, gas, and chemical facilities and preferably within an EPC company
• Skill in oral and written communication

Software Knowledge:

• AutoCAD
• Experience using a graphically to-scale integrated hydrology and hydraulics site drainage software such as EPA SWMM, PCSWMM, Storm and Sanitary Analysis (SSA), or InfoDrainage.
• Autodesk Civil 3D (preferred but not required)

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. 

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking an Assistant Project Manager to join us as an OFE (Owner Furnished Equipment) Project Management specialist for the Power Island equipment scope of supply.  The Venture Global OFE team is responsible to ensure that the properly specified and configured Power Island, Pre-treatment and Liquefaction Equipment is delivered on-time.  The Venture Global OFE team is also responsible for the performance, interface and correct functionality of the Power Island, Pre-treatment and Liquefaction Equipment. 

This position will be located in Arlington, VA or Houston, TX.

Key Responsibilities/Accountabilities:

The Assistant Project Manager (APM) will assist OFE Project Managers on a variety of project functions of varying complexity, and/or will manage some smaller and less complex projects on their own. This position will manage and act as a coordinator and project liaison to the key stakeholders, suppliers, engineering partners, and other throughout the project. The APM will assist in managing document control, manage databases and coordinate and track project activities and communications to ensure project goals are accomplished within the prescribed timeframe and budget parameters

• Assist Project Managers with overall efforts for all OFE Power Island projects.
• Assist the Project Management team to administer request for proposal package development, proposal review process, and support development of detailed scope of work documents for downstream contracts.
• Support supplier submittals, requests for information, supplemental design instructions, and site drawing logs.
• Verify supplier compliance including quality, safety, environmental, environmental and material management programs.
• Execute contracts including support for all change order management, approval of invoices, and management of schedules.
• Assist with project controls efforts, including project cost reporting, scheduling, project work breakdown structure establishment, project set-up and closeout within the accounting system, and field progress tracking.
• Assist with the development of internal and external reports including, project budgeting, cost reports, project cash flow forecast, and project status reports to all stakeholders.
• Participate in internal and external project risk reviews
• Assist with project out contract and project documentation
• Support project team responsibilities in conjunction with site construction activities
• Adhere to Venture Global safety programs, trainings, and promote Safety & Health adherence of project team members and suppliers.
• Complies with all Venture Global policies and standards
• Performs other duties as assigned.

Qualifications

• Bachelor's degree in Engineering, Project Management, Construction Management or related degree from accredited program and 4 years of applicable experience is required.
• Excellent written & verbal communication skills.
• Strong analytical and problem-solving skills.
• Ability to thrive in a fast paced, demanding work environment
• High proficiency using Microsoft Office.
• Ability to work collaboratively with others (Suppliers, Contractors, Project Managers, Engineers and Designers) in a multi-discipline project team environment to resolve design or drawing issues as appropriate and to accomplish objectives.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a detail‑oriented professional to join our team as a Technical Interface Specialist supporting the Owner Furnished Equipment (OFE) scope for the Power Island systems. This role will coordinate with internal engineering teams and external OEMs to manage document submittals, reviews, revisions, transmittals, and records retention. The position requires close collaboration with suppliers and cross‑functional project teams. The ideal candidate will ensure proper version control, maintain document registers, track review cycles, and support interface documentation across multiple complex equipment packages to enable successful project execution. The Technical Interface Specialist is accountable for ensuring adherence to company standards and processes and will be assigned to support project teams across various offices as needed.

Key Responsibilities:

Governance and Control

• Ensure the effective application of Venture Global LNG’s Document Control processes, procedures, numbering standards, tools, and systems.
• Perform document activities for assigned OFE Power Island contracts, including management of all drawings, correspondence, internal documentation, final project documentation, and other project related records.
• Provide oversight and assurance that the Contractor’s Document Control function conforms to and complies with Venture Global LNG’s Document Control standards.
• Utilize and share lessons learned in alignment with Venture Global LNG’s best practices.
• Respond to documentation related inquiries and status requests in a timely manner.
• Manage contractors to ensure timely delivery of documents in accordance with the project schedule.
• Ensure all information is handed over in compliance with Venture Global LNG’s Document Control requirements, operational business needs, and the overall project schedule.

Interfaces

• Develop and maintain effective interfaces with contractors and key internal stakeholders.
• Represent the OFE Document Management function at relevant project meetings and workshops.
• Support and promote document management standardization objectives through training and knowledge sharing initiatives.
• Liaise regularly with Contractor Document Control personnel and other contractors.
• Serve as the primary point of contact for the project team regarding project documentation and associated systems/applications.

Administration

• Perform quality assurance tasks to ensure contractor adhere to contract documentation requirement
• Deliver efficient, effective, and secure management of documents and Project Team support that includes document capture, quality assessment, rejection as applicable, coding, updating, review routing, distribution to ensure that project documents adhere to the deliverable requirements.
• Oversee the application of document numbers and the delivery of documents to meet project requirements to both internal project team members and Contractors
• Daily contact with Venture Global LNG Document Control team members and OFE Power Island team members.
• Proactive in addressing or sharing issues with others who can address them

Essential experience and job requirements

Experience:

• Five (5) years of experience as a Document Controller
• Relevant professional experience gained from job role(s) related to engineering document management on projects or business assets
• Experience using electronic document management systems for processing of documentation and controlling and reporting project data.
• Advanced understanding of Engineering Technical Documentation (Types and Disciplines)

Skills:

• Sound knowledge of Information and Document Management processes
• Excellent interpersonal and influencing skills, across the whole project irrespective of seniority, organizational or contractual boundaries
• High level of self-motivation
• Strong verbal and written communication and organizational skills
• Advanced user of MS Office suite of software

Desirable criteria and qualifications:

• Experience in Power Generation / Oil and Gas / LNG sector
• Previous experience in a Client / Operator role
• Prior experience with Onshore, Offshore and LNG projects preferred

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

This role shall report to the Venture Global LNG HSSE Manager. This person will serve as the immediate contact person for all Health & Safety standards, procedures, and HSSE management system related questions, concerns, or activities. This position will be based in Houston, Texas. The need to travel to project sites is anticipated to be 25 percent of overall time.

Essential Duties & Responsibilities:

• Lead the HSSE standard development and revision process.
• Point person for information technology related interfaces with the HSSE Management systems.
• Assist with reviewing safety training content for accuracy and providing content updates where necessary to meet regulatory and VG requirements.
• Conduct field reviews of locations to ensure compliance with appropriate programs, plans, and training.
• Complete other business tasks as assigned.

Qualifications:

• A minimum of five (5) years’ experience working as a Safety Technician or Specialist position.
• Experience in Health and Safety policies, procedures, and standards in Industrial operations, natural gas operations, or liquefaction facilities, and/or an equivalent combination of education and experience.
• Ability and comfort working within IT systems, Enablon, Sharepoint, and other IT related HSSE systems.
• Experience in technical writing a plus.
• Demonstrated ability to enter data, analyze and troubleshoot technical systems, and manage projects.
• Strong communication written and verbal skills.
• Proficient in MS Office (Excel, Word, Outlook, and Teams).
• Ability to work independently, with a high degree of accountability and accuracy.
• Eligible to work in the US, pass a drug test and background check with criminal history.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital costs.

This role shall report to the Venture Global LNG HSSE Director. This person will serve as the immediate contact person for all Health & Safety standards, procedures, and training related questions, concerns, or activities. This position will be based in Houston, Texas. The need to travel to project sites is anticipated to be 25 percent of overall time.

Essential Duties & Responsibilities:

• Lead corporate HSSE program development and revision process.
• Assist with incident investigations, facilitate root cause investigations, and ensure corrective actions identified and tracked to completion.
• Assist with reviewing safety training content for accuracy and providing content updates where necessary to meet regulatory and VG requirements.
• Conduct field reviews of locations to ensure compliance with appropriate programs, plans, and training.
• Complete other business tasks as assigned.

Qualifications:

• A minimum of five (5) years’ experience working as a Safety Technician or Specialist position.
• Experience in Health and Safety policies, procedures, and standards in Industrial operations, natural gas operations, or liquefaction facilities, and/or an equivalent combination of education and experience.
• Experience in incident investigation required, TapRoot experience a plus.
• Experience in technical writing a plus.
• Experience in learning management systems a plus.
• Demonstrated ability to enter data, analyze and troubleshoot technical systems, and manage projects.
• Strong communication written and verbal skills.
• Proficient in MS Office (Excel, Word, Outlook, and Teams).
• Ability to work independently, with a high degree of accountability and accuracy.
• Eligible to work in the US, pass a drug test and background check with criminal history.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

The OT Systems Admin is responsible for administrating OT/ICS (Industrial Control Systems) including DCS, PLC, HMI, SCADA, Aveva PI. The OT Systems Admin will lead maintenance, support, enhancement and security of the OT/ICS systems. This new position will be based in our Arlington, VA or Houston, TX office and structured within IT under the Vice President of Plant Technology.This position will facilitate the implementation of OT/ICS development, processes, strategies, and procedures. This position will require working with Operations, Maintenance, Engineering, Cybersecurity and IT team.

The position will be located in Arlington, VA or Houston, TX.

Key Responsibilities and Essential Duties:

• Expertise in Veeam Backup & Replication, including job configuration, replication, and restoration.
• Hands-on management of Tape Libraries, including media rotation and long-term archival compliance.
• Administration of all OT/ICS (Industrial Control Systems) devices for infrastructure, network, applications and cybsersecurity aspects.
• Works with Operations, Maintenance and IT team to manage incidents, changes, request, root cause analysis, demands, minor and major upgrades of the OT/ICS systems.
• Review system performance and health reports to identify potential degradation or emerging reliability issues within control systems, and collaborate with site team to assess whether lifecycle, configuration or platform factors may contribute to performance impacts
• Support design, development, testing, commissioning and start-up of OT/ICS systems for major capital Projects.
• Support the deployment of monitoring tools, patches and hardening recommendations on ICS and OT devices.
• Full lifecycle management of Active Directory (AD), including GPO design and expert-level troubleshooting of replication and authentication.
• Lead large-scale Server and VMware Migrations, handling hardware refreshes and cross-vCenter data movement with minimal downtime
• Deep technical knowledge of vSphere/ESXi and VMware Horizon infrastructure (App Volumes, DEM, and UAG).
• Experience with SAN installation, fabric zoning, and LUN provisioning for virtual workloads.
• Management of DNS, DHCP, and Infoblox (IPAM).
• Standardize software installation, automated patching, and lifecycle management for the server fleet.

Job Qualifications

• Bachelor’s Degree in Computer Science, Information Technology, Computer Engineering, or a related technical field is required.
• Minimum 7 years in ICS/OT , Enterprise System Administration.
• Experience in DCS, HMI, SCADA, PLC, Control Network and Operational Technology (OT) systems.
• Experience in leading workshops with several stakeholders.
• Excellent interpersonal and communications skills, with strong critical thinking and attention to detail.
• Strong work ethic with ability to effectively prioritize, meet deadlines, adapt to changing priorities and business needs, and succeed in a fast-paced environment.
• Excellent attention to detail and the ability to efficiently summarize and prioritize information.
• Strong technical writing skills.
• Relevant certifications (VCP, VMCE, or MCSE) are highly preferred.

Preferred Qualifications

• Experience in industry leading DCS/PLC systems (hardware, software, network) like Rockwell, Siemens, Honeywell, Yokogawa, GE, Emerson or Aveva PI (Historian).
• Experience with process control network devices like Hirschmann switches.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Role Overview

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas, supporting global demand through reliable, capital-efficient infrastructure. Venture Global’s modular, mid-scale plant design leverages proven technology in an innovative configuration to deliver the same operational reliability and efficiency as traditional LNG facilities at significantly lower capital cost.

The Material Planner is responsible for developing and executing advanced material planning strategies to ensure availability of materials across project startup, commissioning, and ongoing operations. This role integrates material master data with demand planning to support project initial fills, commissioning and startup (CSU) spares, integrity-driven capital spare requirements, and long-term maintenance and operational spares. The Material Planner's responsibilities include evaluating inventory usage, maintaining material lead time data accuracy, coordinating with other internal departments for proactive material appropriation, and establishing inventory stocking levels consistent with facility demand. The Material Planner will use prior experience and technical knowledge to ensure materials are properly defined, planned, and aligned with equipment and operational requirements to support safe, reliable, and efficient LNG production.

Key Responsibilities
•    Ensure accurate demand signals are incorporated from projects, maintenance plans, and operational requirements.
•    Develop and execute material planning strategies supporting project initial fills, including first two-year operational and commissioning and startup (CSU) inventory requirements.
•    Support development and validation of Bills of Materials (BOMs), spare parts lists and ensure planning-related master data fields are accurate and maintained.
•    Analyze material usage history (turns), lead times and other variables to ensure the consistent and adequate supply of operational, capital, and consumable spare parts necessary for planned and unplanned maintenance activities.
•    Establish and manage planning parameters in SAP including MRP type, safety stock, reorder points, min/max levels, and lead times.
•    Coordinate with other departments, e.g. engineering and maintenance teams, to gather input for material planning based on production goals, timelines, supplier and/or other global capacity constraints.
•    Work closely with procurement and expediting teams to align planning strategies with supplier lead times, evaluate alternative materials to satisfy urgent production demands, and meet delivery performance.
•    Track material usage volume, monitoring demand patterns, purchasing trends and evaluate excess or obsolescence.
•    Prepare and maintain material inventory reports, performance reports and financial estimates of material inventory variations.
•    Drive continuous improvement in planning processes, tools, and system utilization.
•    Perform other duties assigned.

Qualifications
•    5+ years experience in material planning, inventory management, or supply chain operations for projects, operations, or industrial manufacturing organizations.
•    Bachelor’s degree in Supply Chain, Business, Finance, Engineering or a related discipline.
•    Pursuing certification or certified in an accredited Supply Chain program (CPSM, CSCP, CPIM, CIPS, etc.).
•    Knowledge of manufacturing, fabrication, and engineered materials processes
•    Possess strong interpersonal skills to maintain productive vendor relationships and lead material planning meetings.
•    Interest in and comfortable with being a part of a team with rapidly changing assignments and priorities.
•    Self-directed, detail-oriented and able to clearly formulate and present material planning decisions.
•    Strong proficiency using MS Office tools including Excel, BI dashboards, etc.
•    Advanced experience with procurement and material management platforms, e.g. SAP, Coupa, Site Sense, IPMS or others.
•    Periodic domestic USA travel may be required, ~10% or as needed to oversee projects and the remote teams.
•    Work Hours:  7AM – 4 PM, In office Monday – Friday; some overtime and weekend hours may be required.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Role Overview

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas, supporting global demand through reliable, capital-efficient infrastructure. Venture Global’s modular, mid-scale plant design leverages proven technology in an innovative configuration to deliver the same operational reliability and efficiency as traditional LNG facilities at significantly lower capital cost.

The Analyst, Material Master Data will own and maintain the inputs to the SAP Material Master database. The Analyst, Material Master Data will be responsible for the governance and administration of the Material Master including the execution of the processes, procedures and activities under which records are created, updated, and cleared from the SAP Material Master.

Key Responsibilities
•    Ensure the designated workflow process for updates to the SAP Material Master is being adhered to and take action to update this workflow process based on changes in the Master Data Governance policies.
•    Create and maintain material master records in SAP, ensuring all required fields are complete, accurate, and aligned with company standards.
•    Organize the upload of initial spare parts lists (SPIR or SPIL) for Projects and Post Project Closeouts.
•    Review and validate requests for new material creation to prevent duplicate or incorrect material records and resolve any issues with the SAP Material Master data accuracy or completeness.
•    Facilitate periodic updates to the SAP Material Master data to ensure accuracy of part attributes including unit of measure, material type, valuation class, lead times, financial value, inventory planning levels (reorder points), sourcing rules, etc.
•    Coordinate with other departments to gather inputs necessary to complete the SAP Material Master data including part numbers, sourcing rules, pricing, weights, dimensions, descriptions, photos, etc.
•    Maintain documentation and audit trails for material creation, changes, and deletions in accordance with company procedures.
•    Assist with data cleanup initiatives, including removal of obsolete materials and consolidation of duplicate records.
•    Prepare periodic reports or metrics depicting the Material Master content, accuracy, and completeness.
•    Support continuous improvement efforts to enhance data quality, standardization, and system usability.
•    Perform other duties assigned.

Qualifications
•    5+ years of experience in material master data roles for planning, inventory management, purchasing, or a related position for projects, operations, or industrial manufacturing organizations.
•    Bachelor’s degree in Supply Chain, Inventory Management, Business, Finance, Engineering or a related discipline.
•    Pursuing or certified in an accredited Supply Chain or Asset Management program (CSCP, CPIM, etc.).
•    Strong organizational, attention to detail, analytical, and problem-solving skills.
•    Good communication skills, both verbal and written, with the ability to simplify complex concepts and present key details and conclusions.
•    Possess strong interpersonal skills to maintain productive vendor relationships, organize and teal meetings and present updates to leadership.
•    Comfort being part of a team environment with rapidly changing assignments and priorities.
•    Strong proficiency in the use and manipulation of MS Office tools including Excel, BI dashboards, etc.
•    Advanced experience utilizing material management platforms, e.g. MDO and SAP Materials Management “MM” modules or similar. 
•    Periodic domestic USA travel may be required, ~10% to support projects and remote teams.
•    Work Hours: 7AM – 4 PM, In office Monday – Friday; some overtime and weekend hours may be required.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

The Environmental Manager is responsible for environmental permitting and managing of construction and operation activities of pipelines and LNG facilities.  This person's prime objective will be ensuring Venture Global LNG’s vision and environmental regulations have been adhered to with special attention to the schedule impacts that may result during construction. Additionally, this person will be responsible for coordination and reporting on environmental issues and compliance, including reporting on weekly and monthly progress with special attention to schedule impacts identified.

Responsibilities:

• Oversee compliance with environmental related permits, including effectively engaging and liaising with government regulators, preparing and submitting applications and reports.
• Interact with construction teams to provide technical environmental advice and support.
• Ensure the compliance of environmental procedures and standards for all activities.
• Manage environmental data and associated databases.
• Perform data validation of environmental monitoring data for inclusion in internal and external reports.

• Collaborate with architects, engineers, and other construction specialists on project design and practices.

Qualifications:

• BS in Environmental Science, Construction Management, Industrial Management or commensurate work experience in a supervisory role
• 8-10 years experience in industrial (e.g., facilities) and pipeline construction.
• 3 or more years of management experience
• Experience working on Client side as representation in the field
• Ability to work within a team with demonstrated strong interpersonal skills
• Demonstrated self-motivation and direction, with strong bias toward timely performance and problem resolution
   

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

The Senior Manager, Supplier Quality is responsible for developing a supplier quality team, relevant Supplier Quality assurance / control processes and leading end-to-end management of supplier quality onboarding, development, Zero Defect performance improvement, etc.This role reports directly to the Senior Director, Quality Management and ensures that all external suppliers meet or exceed Venture Global’s quality, safety, and regulatory standards through rigorous assessment, continuous improvement, and strategic partnership. The Senior Manager, Supplier Quality will work closely with Supply Chain, Engineering, Projects, Site Operations, Regulatory Affairs, and Quality to ensure suppliers are compliant to specified quality and technical requirements as well as partnering to qualify, onboard, and assess / improve supplier performance.

Responsibilities

• Define and execute the supplier quality strategy aligned to business objectives.
• Develop and lead a team of Quality Assurance and Quality Control professionals.
• Design and manage a supplier qualification program that includes risk assessments, formal process for approval and add to the Approved Supplier List.
• Perform supplier capability, etc, assessments and audits as needed.
• Develop and maintain quality assurance standards / procedures, etc. to ensure compliance to defined regulatory, product technical, and quality requirements.
• Act as the primary representative for supplier quality, interfacing with supply chain, internal teams, contractors, and other stakeholders.
• Ensure supplier quality support with supply chain and incoming issues to sites.
• Manage the Supplier Corrective Action Request (SCAR) process for non-conforming materials to ensure timely root cause analysis and resolution.
• Establish a Supplier Zero Defect Program (ZDP) that includes developing, tracking, improving Key Performance Indicators (KPI) including escapes and supplier related COPQ, and developing a Supplier Corrective Action Board (CAB) for high impact Supplier escapes.
• Provide technical guidance and training to suppliers to improve their processes and build their quality capabilities.
• Deliver the Venture Global culture of quality reinforcing through supply chain.
• Provide regular updates regarding supplier quality performance to leadership at defined intervals.

Qualifications

• Bachelor's degree in Engineering (Mechanical, Electrical, Industrial), Science, Manufacturing, or Quality Management required.
• A minimum of 10 years of experience in the Supplier Quality field with at least 5 years managing a supplier quality organization.
• Experience leading RCA methods (ie 8D, A3) and tools as well as implementing effective corrective actions with proven results.
• Experience working cross-functionally, developing and deploying a strategy.
• Experience in Oil and Gas / LNG liquefaction facilities preferred.
• Experience working in a fast paced, transformational environment.
• Ability to work within project deadlines and adjust as priorities change.
• Possess the ability to develop, coach and influence.
• Have the ability to read and interpret engineering drawings such as P&IDs, Civil/Structural plans, details, Electrical Wiring Diagrams, and Piping Isometrics.
• Thorough knowledge and understating of all industry codes, standards, and industry best practices.
• Exhibit excellent written and oral communication skills.
• Advanced proficiency with Microsoft Office, Microsoft Projects and PowerBI.
• Strong knowledge of API Q2, ISO 9001, international quality standards, and technical matters related to ASME and API codes and various industry, regulatory standards (ie FERC, PHMSA).
• Experience with supplier audits, assessments, and inspections.
• Well-articulated with excellent written and verbal communication, planning, computing, technical, and interpersonal skills.
• Strong analytical and problem-solving skills.
• Ability to work independently and as part of a team.
• Willingness to travel, both domestic and international, if necessary.
• Broad knowledge and understating of all industry codes, standards, and industry best practices.
• Ability to obtain a TWIC Card.

Preferred Minimum Certifications

• Quality Certifications (API, ASQ, ISO)
• ASQ Certifications (CQA, CQE, CMQ-OE)
• Six Sigma Green or Black Belt
• API/AWS/ASME Certifications

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a leader to join us as a Lead Designer, Piping and Instrumentation Diagram. This position will report to the Manager, Piping and Instrumentation Diagram.

This position is located in Downtown Houston. Work schedule is Monday - Friday in office.

The Senior Designer, Piping and Instrumentation Diagram is responsible for interpreting and creating Piping and Instrumentation Diagrams (P&IDs), which are detailed engineering drawings that visually represent the layout of a process system, including piping, equipment, and instrumentation within an industrial facility; essentially, they are experts in understanding the intricate details and symbols used on P&IDs, allowing them to analyze process flow, identify potential issues, and ensure accurate design and operation of the system. 

Responsibilities:

Understanding of and ability to work with process engineering:

• Strong grasp of block flow, process flow, material selection diagrams, as well as the different types of equipment used in various industries. 
• Strong understanding of project/CAD life cycles and workflows.
• Ability to clearly comminute via phone, email, and in meetings.

 Proficient in P&ID symbols and standards:

• Accurately interpret and utilize the standardized PIP symbols used on P&IDs, including those related to valves, pumps, instruments, and safety devices. 

 Experience in design and review:

• Review P&IDs for accuracy, consistency, and compliance with engineering standards, identifying potential design flaws or safety concerns. 
• Experience running P&ID Teams of four users or more with High Value Centers.

 Knowledge of relevant software:

• Experience with the P&ID design software is required.
• 7+ years of experience SmartPlant P&ID
• 2+ years of experience with AutoCAD/MicroStation

Roles where a P&ID Lead Designer might be involved:

 Project engineering teams:

• Contribute to the development and review of P&IDs during all phases of a project. 
• Understanding of Pre-FEED, FEED, Detail Design, and EPC aspects of Capital Projects.

Operations and maintenance teams:

• Analyze P&IDs to troubleshoot issues, plan maintenance activities, and understand system modifications. 
• Understanding of the needs of Plant Operations and Owner P&ID use and functionality.

 Quality assurance teams:

• Ensure compliance with regulatory standards and internal procedures related to P&ID documentation. 
• High understanding of the Database over picture needs, as well as the ability to do project wide picture and data audits.

 Training and development:

• Provide training to engineers and technicians on how to read and interpret P&IDs effectively.
• Mentor other team members when assigned to your projects, or if they ask for help.

Qualifications:

• Associate degree in science/art or relative field
• 3 or more years of experience as a SPPID Project Drafting Lead
• Experience as a CAD Lead Designer preferred
• Good knowledge of P&ID design software like SmartPlant P&ID or AutoCAD 
• PID/PFD/MSD/BFD drafting experience required
• Able to commute to Downton Houston office Monday - Friday

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

Venture Global is seeking an Project Engineering Manager to join our team.

The Senior Project Engineer will have the following responsibilities:

• Focal point for technical issues/coordination between EPC and owner furnished equipment suppliers. Liaise with home office engineering for the resolution of technical issues that cannot be resolved at site.
• Participate in project safety program through safety walks, attending safety reviews, and providing safety input into designs, procedures, and activities.
• Manage liquefaction scope RFI process between EPC and Owner Furnished Equipment suppliers.
• Review drawings issued by EPC and equipment suppliers.
• Identify quality issues related to defective or non conforming workmanship or materials. Work closely with construction team to ensure that contractors produce the required quality of work in line with project drawings and specifications.
• Research code issues and obtain necessary approvals with subject matter experts
• Attend kick-off and review meetings while interacting with EPC Contractors.
• Support systems completion process including completion of ITRs and PLIs. Ensure punch list items are prepared, collated and cleared expediently.
• Support commissioning activities for liquefaction systems. Ensure systems are complete and pre-requisites have been completed.  Coordinate interfaces as required.
• Support management of change processes.
• Review installation plans, documents, and requirements specific to area of responsibility and ensure requirements are clearly communicated to construction team. Actively support constructability program and communicate constructability issues to discipline engineers.
• Understand industry standards, applicable regulatory codes and requirements, and company standards
• Assist in development and review of turnover dossiers.
• Attend project progress meetings and deliver a status of site engineering activities.
• Build relationship with contractor project engineering counterparts.
• Understand contractual requirements and communicate these to team
• Actively support safety, quality, schedule and cost objectives

 Basic Qualifications

• Bachelor’s degree in Mechanical or Chemical Engineering
• Minimum 5 years of experience with design, construction, or operation of petrochemical infrastructure. Experience representing asset owner in these roles is a plus.
• Broad base of general engineering knowledge including mechanical, electrical, and I&C.
• Team player with a mindset to work with a global team and with diverse cultures
• Experience working on projects with multiple interfaces.
• The candidate will be required to travel domestically.
• Must exhibit a strong desire to take ownership of deliverables
• Experience with cryogenic or liquefaction systems is a plus.
• Experience with systems completion, commissioning, or turnaround activities is a plus.
• Able to read detailed construction drawings and specifications detailing the system design, including P&IDs and one lines
• Excellent technical, practical, and communication skills.

  Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Senior Manager, Supply Chain Finance who will be responsible to manage financial aspects of supply chain operations and strategic sourcing activities supporting Venture Global in achieving its goals of low-cost, reliable and safe operations. This role requires strong quantitative and analytical skills. The successful candidate will be eager to learn, demonstrate curiosity and high attention to detail, have passion to work on a fast-paced environment and be adaptable to a rapidly changing environment.

This position will be located in Houston, TX.

Responsibilities:

• Develop and implement Strategic Sourcing, Procurement and Contracting KPIs
• Establish and implement a methodology for tracking Procurement-led savings; validate savings and associated P&L and cash impacts
• Perform spend analysis by commodity and identify risks and opportunities for VG’s supply chain
• Conduct financial due diligence on critical suppliers; support supplier onboarding and performance by reviewing credit worthiness to ensure health of supplier base
• Support contract negotiations focusing on payment terms, milestone payments, escalation calculations, volume rebates and performance-based incentives
• Develop analytics to ensure compliance and effectiveness of controls within the procure-to-pay process (e.g. requisitions, POs, invoicing)
• Maintain purchase price variance reporting and ensure these variances are highlighted to the procurement team for action or mitigation
• Prepare financial reports and analysis of key supply chain and procurement performance indicators to provide insights and support decision-making
• Support the forecasting of purchasing volumes in conjunction with Demand Planning and partner with procurement to develop pricing agreements with key suppliers
• Identify and implement vendor-managed inventory opportunities to optimize materials management process and improve working capital
• Support Rent vs Buy and Make vs Buy analysis; prepare new business cases supporting key strategic commercial deals
• Support creation of procedures for VG Finance, Procurement and Materials Management
• Develop mitigation strategies for financial risks associated with VG’s supply chain
• Coach and mentor junior team members
• Assist in developing and maintaining systems and analytical tools where required; drive automation where possible to improve efficiency on reporting
• Support ad hoc requests from Supply Chain and Finance Teams

Required Qualifications:

• Bachelor’s Degree in Finance, Economics, Accounting or related field; MBA/Master of Finance is a plus
• 5+ years of professional experience in Finance, preferably with exposure to operations and supply chain
• Understanding of key financial concepts and the financial impact of operational decisions
• Curiosity and ability to think creatively with high standards of accuracy and precision
• Strong knowledge and understanding of MS Office (mainly Excel, PowerPoint and Power BI) and SAP; ability to quickly extract relevant data and convert into simplified analysis and communication is critical
• Highly analytical with demonstrated experience in critical thinking and analytical problem-solving
• Ability to collaborate with others and work cross-functionally
• Excellent communication skills, both verbal and written with the ability to simplify complex projects and concisely convey key insights
• Passion for being a part of a dynamic team environment with rapidly changing assignments and priorities
• Initiative and ownership of work with strong attention to detail
• Ability to accurately prepare professional daily, weekly, monthly, quarterly and annual reports
• Flexibility to travel occasionally (~1x/month)

Preferred Qualifications:

• Experience in the LNG/Oil & Gas industries preferred
• Experience with SAP preferred

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for a Senior Manager, Regulatory Technical Authority position to join our team in Houston, Texas.  

This position will report the Director of Regulatory Compliance.

This position is located in our Downtown Houston office and is a Monday - Friday in-office position.

General Description:

The Senior Manager, Regulatory Technical Authority is responsible for being the subject matter expert in regulatory compliance for our Liquefied Natural Gas (LNG) Facilities for the Federal, State, and Local regulatory requirements. The Senior Manager, Regulatory Technical Authority must be competent in LNG Facility regulations including FERC, PHMSA, and the USCG. This position will report to the Director, Regulatory Compliance.

Responsibilities:

• Act as the regulatory compliance subject matter expert for the LNG facility management of change program to ensure compliance with appropriate regulations and Company Specifications.
• Support the development of scopes of work for LNG facility activities including Capital Projects, Maintenance, and Operations by validating specifications, required credentials and regulatory obligations are satisfied.
• Lead technical authority for Regulatory Compliance in 3D model reviews, HAZOPS, RCAs, and LOPAs.
• Lead technical authority for Regulatory Compliance in supporting engineering design, scope refinement, cost estimating, development of project design specifications, and support construction.
• Complete technical review of routine regulatory reports to validate accuracy with appropriate stakeholders.
• Develop Capital Project requests for compliance improvement opportunities.
• Manage regulation changes and the technical impacts thereof including developing proposed facility modifications to support said changes.
• Lead the development and implementation of technical training for regulatory compliance assurance.
• Responsible for managing Company Specifications, in coordination with Engineering, to ensure regulation citations are appropriately identified and updated, as required.
• Support the Regulatory Compliance Assurance program necessary for Federal, State, and Local audits.
• Performs internal compliance assurance activities in coordination with applicable stakeholders in preparation of routine Federal, State, and Local audits or inspections
• Identify potential areas of compliance vulnerability or risks and provide reports to Supervisor and other LNG business stakeholders.
• Work with Operations and Engineering SME’s to address areas of improvement identified from field assessments and/or changes to Venture Global processes and procedures.
• Support Operations and Engineering processes and procedures to ensure technical regulatory content is accurate and achievable.
• Support in safety related incident management issues on behalf of the Regulatory Department
• Support in executing external regulatory reporting obligations.
• Support the Company’s functional groups in planning, process and control management.
• Collaborate with LNG Operations and Construction personnel, engineering and other stakeholders to share lessons learned, experiences, and knowledge to ensure safe, reliable, and efficient operations.

Qualifications:

• Bachelor of Science degree in Engineering from an accredited university or 10+ years of experience in LNG facility engineering or regulatory support role
• Minimum of 10 years combined experience in design, commissioning, operations, or regulatory compliance
• Have the ability to read and interpret engineer drawings to include P&IDs, PFDs, C&Es, One Line Diagrams, Isometrics, and Civil/Structural drawings
• Must be proficient in LNG Facility Regulations including, but not limited to, 49 CFR 193, 33 CFR 127, NFPA 59A, and ASME B31.3.
• Broad knowledge of Codes, Standards, and Industry Best Practices.
• Must obtain a Transportation Worker Identification Credential (TWIC) card in good standing status.

Skills:

• Excellent research, written and oral communication skills.
• Strong logistics, time management, planning and scheduling skills required.
• An acute sensitivity to safety issues in a hazardous environment.
• Effective communicator at all levels of an organization with individuals and groups from different disciplines, industries and governmental agencies.
• Have advanced computer experience with Word, Excel, Access, and PowerPoint. Experience In Adobe Captivate, Articulate 360, or equivalent e-learning design software preferred.
• Ability to interface and effectively communicate with different groups, including operations staff, maintenance staff, engineering departments, human resources, regulators and other Company work groups.
• Ability to multi-task and function in a highly dynamic atmosphere.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

Position Overview:

The Senior Cost Analyst will provide oversight to project activities and is responsible for achieving safe, cost effective, timely and contractually compliant project results. This position will be based at our Houston, TX office. 

Key Responsibilities and Essential Duties:

• Lead a Safe work culture.
• Provide analysis to project teams by providing communication, coordination and follow-up to meet project goals and objectives.
• Oversee effective project reporting, monitoring and evaluation including regular project progress and performance reporting.
• Engage with project management in order to drive project success.
• Oversight of project budgets
• Understand industry standards
• Support the mitigation of project challenges through creative and innovating problem solving.
• Contribute to effective and efficient project controls oversight of projects
• Report on project status, performance, constraints and issues to Senior and Executive Management.
• Other responsibilities as assigned.

Job Qualifications

• 10+ years of relevant field cost experience with major contractor.
• Power BI experience required.
• Power Query experience preferred.
• Ability to perform multiple tasks and work within project deadlines, and adjust as priority changes occur.
• Exhibit excellent written and oral communication skills.
• Have advanced computer experience and knowledge of Microsoft Office suite.
• Advanced level in Microsoft Excel required.
• Strong analytical and data visualization skills required.
• Excellent attention to detail and ability to efficiently summarize and prioritize information.
• Ability to work nights and weekends as required.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. 

We are seeking a Senior Smart Reference Data (SRD) to join our team in Houston. In this role you will work with Smart tool administrators, Engineering and Design Departments to provide operational support for development and maintenance of piping specifications, specialty items in SRD. This person will be responsible to bulkload piping specs in S3D catalog and make the necessary configurations to ensure that all spec components can be placed correctly in the Smart3D (S3D) model and are represented appropriately on deliverables such as Isometrics and Reports. This person will lead and mentor other team members supporting piping specification development and update in SRD. This person must have a working knowledge S3D modeling environment and must have the ability to configure and troubleshoot issues related to piping specifications.

This position will report to the Director of Engineering Technology

Responsibilities:

Duties and responsibilities include but are not limited to:

• Setup and configure the SRD instance for Venture Global standard pipe specs, in collaboration with IT, Engineering Technology admins, and Project Engineering teams.
• Setting up and managing new and existing engineering projects within Smart Reference Data (SRD).
• Providing user-support to project resources on SRD, S3D specs, and other related issues as needed.
• Creating and managing Pipe specifications in SRD throughout the project lifecycle.
• Coordinating with Piping Spec/material engineers on new spec requests and spec markups as needed.
• Understanding and following Venture Global’s standard work processes for creating new specs and managing spec changes through the project lifecycle.
• Develop and maintain SQL/SSRD/PowerBI reports for SRD data to manage and maintain engineering data.
• Develop procedures/workflows, and automation solutions for checking and validating MOC impacts across SRD and S3D.
• Interfacing directly with software vendor to escalate issues (bugs) and request new functionality to support Venture Global’s standard workflows, which needs a strong technical understanding of the software applications.
• Mapping Iso SKEYS correctly for each component type to ensure standard output on deliverables.
• Developing bulkload sheets for Specialty Items (SP items) as per project request and make them available in S3D catalog as tagged items.
• Bulkloading pipe specs and catalog changes from SRD to Smart3D (S3D) catalog.
• Coordinating with the project design teams to ensure that the S3D model is in synchronization with latest catalog changes.
• Verifying the component placement in SP3D using Catalog Placement tester utility.
• Customize report templates for automating spec report generation using APEX Office Print (AOP) and issuing paper specs.
• Troubleshooting component placement issues in S3D in coordination with S3D support team.
• Troubleshooting ToDo list errors related to catalog changes in S3D.
• Continually seeking opportunities to increase end-user experience.
• Documenting changes and work processes. Must be able to communicate effectively with project teams, and management while maintaining a structured approach of working within a larger integrated engineering solution.

Required Qualifications:

• Bachelor’s degree in materials, mechanical, chemical engineering or similar engineering discipline.
• 8+ years or more experience in Smart Reference Data administration, configuration, development, and version upgrade.
• Strong understanding of ASME piping code and standards.
• Thorough knowledge of SRDPlus interface is a must.
• Experience with upgrading major versions of SRD
• Experience in using Smart3D (S3D) and Catalog placement tool.
• Proficient with S3D Piping modeling functionality and ability to configure/generate Isometric drawings from S3D.
• Relevant engineering and/or construction industry experience is preferred.
• Strong analytical and problem-solving skills.
• Highly motivated and self-directed with strong communication skills
• Experience as a technical leader and/or team lead is a plus.

Preferred Qualifications:

• Completion of admin and user training for Smart Reference Data.
• Knowledge in customization of Symbol Editor using VB .NET symbols for components – custom symbols.
• Strong knowledge of methods for data-centric execution.
• Experience in piping design, and material engineering is a plus.
• LNG project execution experience preferred
•  

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. 

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s three Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. 

We are seeking a Senior Project Engineer, Electrical  to join our team in the site project engineering team in Houston, TX

The role will be part of a team responsible for ensuring that the Plant Electrical System operates as per design, in a safe and reliable manner with minimal downtime.  

 Responsibilities: 

• Interface for all site switchgear, power controls technical alignment
• Provides input to weekly site engineering report
• E-house / power systems RFI Owner
• Inspect major arriving equipment and participate on walk downs
• Maintain log of scope transferred to site and participate in interface meetings between EPC and OFE contractors
• Assist with E-House FAT testing at the supplier's shops and minimize carryover punch list to the site prior to shipment.
• This position reports to the CP2 Project Engineer Manager (Electrical Buildings)

Education, Qualifications & Experiences: 

• Bachelor’s degree in Electrical Engineering, preferably with specialization in Power Systems.
• Minimum 10 year’s experience working with electrical systems.
• Experienced with domestic and/or International electrical codes and standards. Including NEC, NFPA, NETA, and ANSI
• Familiarity with Power Systems Modeling Tools such as ETAP/SKM preferable
• Experience in LNG liquefaction facilities highly preferred.
• Experience with: 

• • Switchgears (13.8kV, 4.16kV, 480V)
  • Motor Control Centers (MCC)
  • Uninterruptible Power Supplies (UPS)
  • Transformers
  • Energy Management Systems (EMS/SCADA)
  • Electrical System Studies 

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. 

We are seeking a Contracts Administration Manager with experience and knowledge in contract formation, management, and execution of large and complex equipment and services agreements in the LNG industry.  The Contracts Administration Manager will lead the negotiation of terms and conditions with major Original Equipment Manufacturers and Contractors, lead the contract management function for the assigned business unit, oversee the administration of variation management, claims, reporting, acceptance and closeout processes for assigned complex contracts associated with the Owner Furnished Equipment (OFE) contracts for the Company’s LNG projects.   The Contracts Administration Manager will participate in a multi-disciplinary team that provides contracts lifecycle support.

The Contracts Administration Manager will report to OFE Contracts Leader and support the OFE Project Teams as necessary. This position will be located in Houston, TX.

Key Responsibilities:

• Draf, redline, and negotiate complex agreements with strategic sellers and contractors, in coordination with the OFE team and assigned Company’s legal counsel.
• Manage the contract administration function on assigned business units.
• Lead and mentor a team of contract administration professionals.
• Collaborate with Venture Global’s team of Subject Matter Experts to define strategies related to contracting, risk management, controls, and taxes, for all assigned new OFE agreements.
• Oversee collaboration with the OFE projects team to evaluate, negotiate and administer change orders, task orders, and amendments.
• Oversee the administration of new change order requests, including scope, price and schedule definition, contractual amendments drafting, internal reviews and approvals, Contract Lifecycle Management (CLM) platform entries, and execution, ensuring adherence to Venture Global’s Guidelines and Procedures.
• Support the OFE Project Team in defining strategies for claims related to defects, serial defects, warranty, and acceptance, amongst others. 
• Draft strategic official project notifications or official response notices in coordination with technical and commercial experts, legal, and senior Management.
• Ensure compliance with requirements for contractual documents and requisitions upload to the CLM platform and approvals per Company’s DOA, as required, in coordination with the Sourcing and Procurement department.
• Advise the OFE Project Team on contractual questions by performing contract analyses and internal checklists.
• Coordinate projects acceptance and close out in accordance with contractual requirements, in coordination with project controls, legal, and OFE Project team.
• Maintain contract documentation repositories.
• Track and update all activities and progress on assigned agreements in Company’s designated logs.
• Attend management internal and external meetings, as required.
• Attend project kick off meetings, project progress internal and external review meetings, costs review meetings, and quality reviews, as necessary.
• Support other contract administration tasks assigned by the OFE Contracts leader.

Job Qualifications:

• Bachelor’s degree in Finance, Economics, Law, Business or related field.
• Master’s degree.
• Minimum 10 years of professional experience with contract / subcontracts management and negotiation in the LNG, power, oil and gas, industrial, or construction industries.
• Demonstrated experience and ability to lead contractual negotiations of complex agreements.
• Experience managing and mentoring contract management teams.
• Able to effectively communicate across various disciplines and with external counterparties.
• Excellent analytical and problem-solving skills, with an ability to spot issues and risks and escalate when appropriate.
• Excellent writing skills, including drafting of contractual documents.
• Ability to prioritize and meet critical deadlines.
• Attention to detail and ability to manage commercially sensitive and confidential information.
• Ability to work independently as well as with team members and take direction in a fast-paced and dynamic environment.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Senior Director, Quality Operations located in Houston, TX.

Overview

The Senior Director – Quality, Operations will lead the operational quality strategy and execution for Venture Global’s LNG facilities, supporting operations, maintenance, and reliability activities across Calcasieu Pass LNG and Plaquemines LNG.

This role ensures quality excellence across routine operations, planned turnarounds, and both scheduled and emergent outages. The leader will drive rigorous QA/QC practices, defect elimination, and operational discipline across all operational activities.

The role partners closely with Operations, Maintenance, Reliability, HSSE, Engineering, and Supply Chain to ensure that maintenance execution, repairs, modifications, and outage work meet the highest standards of reliability and safety.

This leader will serve as the enterprise operational quality authority and ensure strong field presence, audit rigor, and governance for non-conformance management, stop-the-line authority, root cause analysis, and lessons learned implementation across sites.

Key Responsibilities

Operational Quality Leadership

• Lead operational quality programs across operations including maintenance execution, support reliability improvement initiatives, turnarounds and outages, equipment repairs, and contractor oversight.
• Ensure consistent application of QA/QC standards across mechanical, electrical, instrumentation, rotating equipment, and all systems.
• Drive a culture where quality is owned by operations and supported by quality leadership.
• Turnaround and Outage Quality Governanc
• Provide quality leadership for planned turnarounds and outages including planning, readiness reviews, inspection verification, contractor oversight, and final work acceptance.
• Establish quality checkpoints across scope development, readiness, execution oversight, and closeout.
• Ensure restoration of critical equipment meets OEM and engineering specifications.
• Field Quality Assurance & Audits.
• Conduct field walkdowns, maintenance execution audits, contractor inspections, and mechanical integrity reviews.
• Maintain visible field presence reinforcing operational discipline and quality ownership.

Non-Conformance Management

• Own the enterprise operational non-conformance management process working closely with operations to ensure all defects are captured and seamless approach working with Operations.
• Ensure accurate defect identification, classification, prioritization, and closure.
• Manage systems that capture defects, quality issues, and maintenance execution problems.

Stop-the-Line Authority

• Establish and reinforce a Stop-the-Line culture ensuring employees can halt work when quality or safety standards are compromised.
• Ensure rapid resolution and documentation of issues.

Root Cause Analysis Leadership

• Lead/Support RCA investigations for major equipment failures or reliability issues.
• Drive CAPA closure and verify effectiveness of corrective actions.

Cross-Site Lessons Learned Program

• Develop and institutionalize lessons learned programs across Calcasieu Pass and Plaquemines.
• Translate learnings into updated procedures, training content, and engineering improvements.

Contractor Quality Management

• Govern contractor quality performance during outages and maintenance work.
• Establish quality expectations, oversight processes, and performance metrics.

Quality Culture & Workforce Engagement

• Drive a culture of operational quality through training, leadership engagement, and frontline ownership.
• Partner with training teams to embed QA/QC expectations into workforce development.

Performance Measurement & Reporting

• Track operational quality KPIs including rework rates, turnaround performance, defect recurrence, and non-conformance closure times.
• Provide executive dashboards and reporting on operational quality performance.

Qualifications

Education

• Bachelor’s degree in Engineering, Operations, or related discipline required.
• Advanced degree preferred.

Experience

• 15+ years of experience in LNG operations, oil & gas operations, petrochemical facilities, or heavy industrial process plants.
• 10+ years in quality, reliability, or operations leadership roles.
• Experience supporting turnarounds and outages in complex industrial facilities preferred.

Technical Expertise

• Strong expertise in LNG operations and maintenance practices.
• Deep knowledge of root cause analysis methodologies.
• Familiarity with mechanical integrity programs and maintenance quality processes.
• Experience implementing operational QA/QC programs in energy environments.

Certifications (Preferred)

• Lean Six Sigma Black Belt
• ASQ Certified Quality Engineer (CQE)
• Reliability or maintenance certifications

Leadership Competencies

• Strong field leadership presence
• Ability to influence operations teams and contractors
• Excellent investigative and problem-solving skills
• Strong communication and executive reporting capabilities
• Ability to drive cultural change across complex organizations

Success Measures

• Reduction in operational defects and maintenance rework
• Improved turnaround and outage quality performance
• Faster non-conformance resolution
• Effective RCA implementation and CAPA closure
• Measurable reliability improvements
• Adoption of quality culture across operations

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Construction Project Engineer located in Houston, TX.

General Description:

The Construction Project Engineer reports to the Pipeline Project Director and supports the safe, efficient and effective execution of all midstream gas related projects.  The ideal candidate will be a team-oriented individual with experience in the design, construction, and/or operation of pipeline facilities. This person will have experience working in both an office and field/site environment providing project oversight through the planning, bidding, construction, and commissioning/startup phases of midstream gas related projects. The Construction Project Engineer will work alongside the current VG Pipeline Execution Team and support multiple projects at the same time.

Responsibilities:

• Provide oversight for EPCM and Construction Contractors
• Review and comment on Engineering deliverables, plans and procedures including pipeline, meter stations, and compressor stations
• Review and comment on Construction Contractor plans, schedules, and procedures
• Provide project management support to Venture Global pipeline projects as needed
• Support other functions with permitting, planning and execution activities
• Prepare reports, assist with presentations related to the pipeline projects
• Act as Owner’s engineer / Owner representative as needed
• Support review and approval of Contractor invoices, change orders and schedules
• Interface with equipment suppliers for installation requirements and delivery schedules
• Assist with cost estimates and cash flows
• Assist with site audits and field visits
• Support PHMSA and FERC visits and data request

Qualifications:

Education and Certifications

• Bachelor’s degree in Engineering, Construction Management, or equivalent
• 5 or more years of pipeline industry experience preferred, with demonstrable experience in Project Engineering and Construction Management
• 3 or more years of pipeline field experience in the execution of projects or operations
• PMP certification a plus
• Understands the means, materials, and methods utilized in the construction of pipeline facilities
• Understands concepts of asset lifecycle management, system reliability, and gas transmission operations
• Excellent verbal and written communication

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

Venture Global is seeking a Project Manager, Pipelines, to execute special projects within the pipeline organization and to provide functional project management support across CAPEX projects.

This position will be based in Houston, TX.

The Project Manager, Pipelines will have the following responsibilities:

• Execute special projects to enable the growth of the Pipeline organization.  Special projects will be related to program development, compliance, change management and continuous improvement.
• Provide functional project management support across the Pipeline capital project portfolio.  Functional support will be focused on planning, monitoring, controlling, and closing activities across multiple projects.
• Frequent engagement with outside consultants, contractors, and vendors.
• Frequent engagement with internal stakeholders, such as operations, health & safety, project controls, contracts, procurement, legal, environmental, land, and document control.
• Assist with the preparation and QA/QC or project documents, e.g., scopes of work, proposals, contracting strategies, standards, procedures, specifications, drawings, MOC, PSSR, HAZID/HAZOP, and execution plans.
• Prepare management reports and presentations.

Qualifications

• Degree or commensurate experience relevant to the job responsibilities.
• Minimum of fifteen (15) years’ experience in the oil and gas industry.
• Understanding of project development and delivery.
• Interact with a range of internal and external stakeholders.
• Experience with MOC, PSSR, HAZID/HAZOP.
• Periodic travel to project sites and consultant offices.
• TWIC holder or ability to obtain TWIC.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

Position Summary

The Vessel & Terminal Auditor Superintendent supports the Director, Marine Risk by providing maritime technical and operational expertise to ensure that all marine activities are conducted safely and in full compliance with Venture Global’s standards, regulatory requirements, and stakeholder expectations. 

This position assists the Director, Marine Risk in managing marine risk at Venture Global terminals and third‑party facilities, as well as providing marine subject matter expertise across the organization. 

Key Responsibilities

Terminal Operations

• Conduct audits of LNG terminal facilities in line with the OCIMF MTMSA framework. 
• Provide strategic marine support and subject matter expertise (SME) based on industry best practices and due diligence standards. 
• Promote marine HSSE performance and provide oversight to VG terminal HSSE teams on marine‑related activities. 
• Work closely with Marine Supervisors and Persons‑in‑Charge (PICs) to ensure safe and efficient cargo operations. 
• Support the Marine Risk Advisor in maintaining the marine risk register and assist terminal HSSE teams with mitigation implementation. 
• Develop site‑specific marine procedures aligned with international, federal, and industry regulations. 
• Support MTMSA and TMSA audits with buyers and ship operators, including documentation review, audit completion, report preparation, and observation close‑out. 
• Provide marine risk management support to VG’s operating and project facilities. 
• Assist with marine training initiatives, promoting marine safety and operational best practices. 
• Serve as SME for incident investigations, non‑conformity close‑outs, and audit findings. 
• Work with the Marine HSSE and Crisis Management teams to maintain and exercise marine emergency response plans. 
• Track and analyze HSSE statistics and KPIs for all marine operations.

Future Project Development

• Provide marine SME support to Venture Global’s projects and development teams. 
• Offer guidance on design, construction, commissioning, and operational readiness for marine and terminal systems.

Audit and Assurance

• Provide effective marine advice and problem‑solving solutions based on best practice, due diligence, and regulatory compliance. 
• Ensure safe operations within company, national, international, and industry standards. 
• Support regulatory and environmental compliance programs. 
• Conduct internal safety audits to promote a proactive safety culture and continuous improvement. 
• Collaborate with operations and engineering teams to prepare materials and documentation related to Venture Global’s marine “safety case.”

Vessel Operations

The following responsibilities are to be carried out in close coordination with the Venture Global Ship Management (VGSM) team:

• Conduct ISM, ISPS, and MLC internal audits in accordance with the VGSM audit schedule. 
• Verify vessel compliance with the Safety Management System (SMS), statutory regulations, Flag State, and Class requirements. 
• Perform pre‑vetting, navigational, cargo, and safety inspections to ensure vessels are prepared for external inspections (e.g., SIRE 2.0, Port State Control). 
• Evaluate crew competence, training records, and adherence to onboard safety procedures. 
• Review onboard risk assessments, incident investigations, and corrective/preventive actions. 
• Identify gaps and non‑conformities; issue clear audit reports and ensure verification of close‑out actions. 
• Coordinate with vessel Masters, Chief Engineers, and shore management to ensure timely and measurable improvements. 
• Support the Marine and HSEQ departments in developing audit tools, checklists, and training materials. 
• Provide performance feedback and recommendations to ship management on fleet safety and operational culture.

Qualifications

Education & Certification:

• Bachelor’s or Associate Degree, or Marine Class I Certificate of Competency (Deck or Engine). 
• Minimum: Chief Officer, Chief Engineer, or Second Engineer experience on a gas carrier (LNG/LPG) in compliance with SIRE 2.0 requirements. 
• Preferred: Master Mariner with command experience. 
• Must hold a valid Transportation Worker Identification Credential (TWIC) card. 
• Lead Auditor Training Certificate required.

Experience:

• Experience in marine and terminal operations, with practical application of the OCIMF MTMSA framework. 
• Significant sea‑going service aboard tankers (preferably chemical, LPG, or LNG) in a senior officer capacity. 
• Oil, Chemical, and/or Gas endorsement required. 
• Proven experience conducting terminal, technical operator, and contractor audits, with strong understanding of tanker inspection processes. 
• Understanding of contractor management in 3rd‑party marine operations, including pilotage, towage, and line handling. 
• Experience with commissioning and startup activities is an advantage. 
• Understanding of project development, safety management, and marine risk.

Skills & Competencies

• Strong awareness of marine safety and risk management in hazardous environments. 
• Expert knowledge of OCIMF best practices for marine terminal and LNG vessel operations. 
• Exceptional written, verbal, and interpersonal communication skills. 
• Ability to communicate effectively across all organizational levels and disciplines. 
• Strong cross‑cultural collaboration skills for working with global teams. 
• Possess the personality and ability to build mutually respectful relationships with management, peers, and facility‑level personnel, fostering teamwork toward world‑class operations. 
• Highly organized, capable of managing multiple activities and programs accurately and efficiently while meeting deadlines. 
• Demonstrated analytical and problem‑solving skills, with an emphasis on practical and proactive solutions. 
• Proficient in Microsoft Office Suite (Outlook, Word, Excel, Visio, Project, PowerPoint). 
• Knowledge of Optimoor, LNG Ship/Shore Interface systems, and MIS Mainstay is a plus. 
• Proven leadership skills with keen attention to operational detail and continuous improvement.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

Position Overview:

The Cost Analyst will provide oversight to project activities and is responsible for achieving safe, cost effective, timely and contractually compliant project results. This new position will be based at our Houston, TX office.  The Cost Analyst will report to the Director of Pipeline Project Controls.

 Key Responsibilities and Essential Duties:

• Lead a Safe work culture.
• Provide analysis to project teams by providing communication, coordination and follow-up to meet project goals and objectives.
• Oversee effective project reporting, monitoring and evaluation including regular project progress and performance reporting.
• Engage with project management to drive project success.
• Oversight of project budgets
• Understand industry standards
• Support the mitigation of project challenges through creative and innovating problem solving.
• Contribute to effective and efficient project controls oversight of projects
• Report on project status, performance, constraints and issues to Senior and Executive Management.
• Other responsibilities as assigned.

 Job Qualifications

• 5+ years of relevant cost experience in major Oil & Gas Engineering and Construction projects.  
• Experience with Pipeline projects preferred.
• Experience with EcoSys preferred.
• Ability to perform multiple tasks and work within project deadlines, and adjust as priority changes occur.
• Exhibit excellent written and oral communication skills.
• Have advanced computer experience and knowledge of Microsoft Office suite.
• Excellent attention to detail and ability to efficiently summarize and prioritize information.
• Ability to work nights and weekends as required.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s three Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost 

We are seeking a Senior Mechanical Engineer - Static Equipment.

This position will be located at our Downtown Houston office and is a Monday-Friday position.

Responsibilities: 

• Mechanical MOC/HAZOP signoff
• Site mechanical technical authority
• VG engineering sign off on static equipment internal inspection / readiness
• Validation of pneumatic test packs and exclusion zone calculation
• Provides input to weekly site engineering report
• Review surveyor deliverables and assist with fit up / interface misses at site 

Qualifications: 

• Bachelor of Science degree in Mechanical Engineering
• Minimum of twelve years combined experience in Design, Commissioning, or Operations of Static Equipment. Experience representing asset owner in these roles is a plus.
• Experience in LNG liquefaction facilities highly preferred.
• Fire Equipment experience a must.
• Ability to perform multiple tasks and work within project deadlines, and adjust as priorities changes occur
• Possess the ability to mentor others through technical training and guidance on planning, scheduling, and engineering subjects
• Have the ability to read and interpret engineer drawings to include P&IDs, PFDs, C&Es, One Line Diagrams, Isometrics, and Civil/Structural drawings
• Knowledge of applicable ASME and API standards.
• Experience with systems completions.
• Strong understanding of the design and operation of heat exchangers and process piping.
• Exhibit excellent written and oral communication skills 

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s  Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Director, System Planning - Pipeline located in our Houston, TX office.  

The Director, System Planning is responsible for leading the strategic planning, hydraulic modeling, and development of natural gas transmission pipeline systems. This role oversees the System Planning function to ensure safe, reliable, and efficient utilization of pipeline assets, while driving project development, capacity expansions, and new energy initiatives. The Director will manage cross-functional teams, collaborate with business development and operations, and spearhead major projects to enhance system capacity, operational efficiency, and revenue generation in alignment with company goals.

Key Roles and Responsibilities

• Direct the System Planning function, including hydraulic design, system modeling, capacity evaluations, and operational analysis to maintain high standards of safety, reliability, and efficiency.
• Assist in the development and execution of transmission asset expansions, new energy ventures, and major projects (e.g., supply enhancements, market links, and reliability improvements) that increase system capacity and generate significant EBITDA.
• Participate in multidisciplinary teams through project life cycles, including Feasibility and FEED phases, ensuring designs meet operational & commercial requirements.
• Oversee the creation and maintenance of pipeline system models, load forecasting tools, and future state analyses to optimize revenue, maintenance capital, and system performance.
• Collaborate with Business Development, Operations, Gas Control, and Project Execution teams to identify transportation opportunities, cultivate customer relationships, and minimize operational disruptions.
• Develop and maintain a robust pipeline of future initiatives to support strategic growth, market presence, and financial objectives.

Qualifications and Requirements

• Education: Bachelor's degree in Engineering (Mechanical, Civil, Petroleum, or related field) required; Master's degree or advanced certifications preferred.
• Experience: 10+ years of progressive experience in natural gas pipeline operations, system planning, hydraulic design, project development, and business development within the energy sector. Proven track record in leading large-scale pipeline projects and teams.
• Leadership: Demonstrated experience managing teams through significant growth periods, major capacity expansions (e.g., 1+ BCF/d), and high-value projects generating substantial revenue.
• Technical Skills: Expertise in pipeline hydraulic modeling, system analysis, load forecasting, compressor station design, and tools for capacity evaluation. Strong knowledge of gas transmission systems, contractual entitlements, and operational optimization.
• Interpersonal and Strategic Skills: Excellent collaboration, communication, and customer relationship management abilities; experience interfacing with commercial teams, operations, and external stakeholders. Strategic thinking with a focus on economic feasibility, risk management, and long-term planning.
• Preferred: Professional Engineer (PE) license or equivalent certifications; familiarity with FERC regulations and industry standards for gas pipelines.

This role offers the opportunity to drive impactful growth in a dynamic energy environment, leading initiatives that enhance system reliability and company performance.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

Position Overview:

The Cost Analyst will provide oversight to project activities and is responsible for achieving safe, cost effective, timely and contractually compliant project results. This position will be based at our Houston, TX office. 

Key Responsibilities and Essential Duties:

• Lead a Safe work culture.
• Provide analysis to project teams by providing communication, coordination and follow-up to meet project goals and objectives.
• Oversee effective project reporting, monitoring and evaluation including regular project progress and performance reporting.
• Engage with project management in order to drive project success.
• Oversight of project budgets
• Understand industry standards
• Support the mitigation of project challenges through creative and innovating problem solving.
• Contribute to effective and efficient project controls oversight of projects
• Report on project status, performance, constraints and issues to Senior and Executive Management.
• Other responsibilities as assigned.

Job Qualifications

• 3+ years of relevant cost experience in major Oil & Gas Engineering and Construction projects.
• Power BI experience required.
• Power Query experience preferred.
• Ability to perform multiple tasks and work within project deadlines, and adjust as priority changes occur.
• Exhibit excellent written and oral communication skills.
• Have advanced computer experience and knowledge of Microsoft Office suite.
• Advanced level in Microsoft Excel required.
• Strong analytical and data visualization skills required.
• Excellent attention to detail and ability to efficiently summarize and prioritize information.
• Ability to work nights and weekends as required.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of SCADA Specialist located in Houston, TX.

General Description:

The SCADA (Supervisory Control and Data Acquisition) Specialist supports the development, implementation, and maintenance of SCADA systems associated with Venture Global’s pipeline operations. This role works closely with engineering, operations, and control room personnel to ensure systems are reliable, functional, and aligned with established standards and regulatory requirements.

The ideal candidate is detail-oriented, technically strong, and comfortable working in a fast-paced environment with evolving project needs. This role will contribute to the buildout of SCADA systems and the control center, working alongside internal teams and external contractors.

This position will be full-time in-person in the Venture Global downtown office and will require shift work to support a 24x7 control center.

Job Duties / Responsibilities:

• Provide on-site SCADA support for the Venture Global Pipeline Control Center in Houston, TX
• Maintain, troubleshoot, and enhance SCADA systems as required to ensure reliable operations
• Document and track service requests, issues, and change requests within the Venture Global ticketing system to ensure timely resolution
• Support system configuration changes, testing, and new asset commissioning activities
• Assist with field investigations to document existing equipment, communications, and configurations
• Coordinate with plant and field personnel to support operational needs while adhering to established regulatory and company requirements
• Support the implementation and maintenance of Control Room Management (CRM) procedures in alignment with applicable standards
• Assist in ensuring SCADA displays and alarm configurations follow established industry practices (e.g., API guidelines)
• Contribute to leak detection system support and monitoring initiatives
• Participate in internal and external audit preparation and support activities as needed
• Follow established Management of Change (MOC) processes for all SCADA system modifications.
• Assist in developing and maintaining SCADA documentation, procedures, and system records

Education:

• Bachelor’s degree in engineering, computer science, or a related field preferred
• Relevant experience may be considered in lieu of a degree

Experience:

• Experience supporting or developing SCADA systems, preferably in pipeline or industrial applications
• Experience with basic programming data types (Float, Bool, Integer, String, Date, Array)
• Exposure to control systems, PLCs, and industrial automation systems
• Familiarity with measurement systems, flow computers, and pipeline instrumentation is a plus
• Experience with industrial communication protocols and networking concepts
• Familiarity with applicable industry standards and regulations (OSHA, DOT/PHMSA, FERC)
• Basic understanding of 49 CFR Part 192 and applicable API 1165 Recommended Practices

Skills:

• Hands-on experience with SCADA systems configuration and support
• Basic SQL knowledge and ability to work with queries
• Familiarity with version control and change management practices
• Experience with reporting tools (e.g., Microsoft Reporting Services)
• Exposure to data historians such as AVEVA PI
• Experience with alarm management tools (e.g., Autosol ACM)
• Ability to analyze and troubleshoot SCADA system issues using data and logs
• Strong analytical and problem-solving skills

Preferred Qualifications:

• Experience with ClearSCADA / Geo SCADA
• Familiarity with industrial protocols such as MQTT, OPC UA, Modbus TCP/IP, EtherNet/IP
• Basic scripting or programming experience (e.g., Python, Ladder Logic, Functional Block)
• Experience with Point-to-Point testing from a Pipeline Control Center
• Experience with Allen Bradley 5000 Series PLCs and associated programming software

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

Responsibilities:

The Sourcing and Contracts Specialist - Services/Construction will partner with internal stakeholders in the Venture Global Projects, Operations and Pipeline teams to ensure the contracting for service and construction labor are addressed.  In this individual contributor role, the Sourcing and Contract Specialist will develop sourcing and procurement strategies, generate requests for proposals, conduct bid events, negotiate and initiate agreements as needed to support project schedules and budgets. This position requires knowledge of the procurement function, familiarity with contracting concepts, practices and procurement strategies. The Sourcing and Contract Specialist must be able to apply this knowledge when reviewing requisitions to find the best opportunity for Venture Global with respect to cost, quality and on time completion. 

Additional job responsibilities include the following:

• Apply procurement/contracting strategies and advise on strategic direction to maximize value in support of business objectives.
• Apply supply chain techniques to maximize value to the business and ensure best practices are being implemented.
• Issue and complete Non-Disclosure Agreements (NDAs) with potential bidders/vendors, as required.
• Conduct pre-qualification activities, generate requests for proposal, issue Service Orders or author Task Orders for the purchase of services.
• Conduct pre-bid conferences, receive and analyze vendor responses, tabulate and evaluate offers, and recommend awards aligned with business needs.
• Understand and be able to negotiate service/construction terms and conditions, define and document scopes of work, and evaluate pricing in agreements to protect the company from risks and liabilities.
• Collaborate and serve as a liaison with internal cross-function teams to ensure proper documentation, contract compliance and to integrate project specific requirements.
• Ensure internal reviews and approvals are received from key stakeholders for contract deviations that arise during negotiations.
• Draft, review, approve and negotiate a variety of contracts, contract amendments and contract extensions with the support of Contract Administration and Legal.
• Apply business requirements in accordance with the Company’s policies and procedures.
• Apply knowledge of vendor capabilities to develop bid lists and bid packages.
• Provide stakeholders with recommendations of vendor selections obtained through the evaluation of vendor proposals and other comparative bid analysis.
• Assist internal and external stakeholders to meet objectives of cost, quality, and schedule while maintaining positive working relationships.
• Ensure all agreements and purchases follow all company policies and procedures and are compliant with all federal, state and local laws and regulations.
• Perform other duties assigned.

Qualifications:

• Bachelor’s degree in business, engineering, supply chain, or another related field.
• 3 years or more in a similar procurement, sourcing or supply chain role involving services or construction projects with complex civil, structural and mechanical scopes.
• Excellent knowledge of sourcing, contracting and procurement processes.
• Strong interpersonal skills and capable of building strong relationships with internal stakeholders, as well as vendors.
• Excellent communication skills, both verbal and written, with the ability to simplify complex concepts and present key details and conclusions.
• Proficient with MS OfficeSuite, SAP and Coupa procurement and contract management systems is preferred.
• Interest in and comfort with being a part of a team environment with rapidly changing assignments and priorities.
• Demonstrated initiative and ownership of work with strong attention to detail.
• Ability to accurately prepare periodic procurement reports.
• Willing to report in office daily, with occasional nights and weekend work require.
• Possess and maintain a valid driver’s license and a driving record satisfactory to the company and its insurers is required.
• Periodic travel to sites in Louisiana and/or suppliers in various domestic and international locations will be required.
• May be required to carry a cell phone and respond as needed during working and non-working hours.
• Legal experience desired.
• Certified Professional in Supply Management (CPSM) desired.

Work Hours:  9AM – 5PM, Monday – Friday (some overtime may be required)

Work Location:  Houston, TX

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Marine Advisor. This role is seen as an entry level position and reports to the Director, Marine Operations, supporting the development of marine operations, across Venture Global LNG by working closely with the LNG terminals, various marine sectors and multiple internal and external departments. 

General Description:

The Marine Advisor shall provide support to Venture Global LNG (VG) staff, contractors, suppliers and other personnel involved in the marine operations at VG LNG terminals.  

The Marine Advisor will provide technical support to the Marine Department, ensuring efficient coordination of day-to-day operations. This role will act as a key liaison between the Marine Department, internal stake holders, and external partners. The position focuses on documentation, compliance support, marine assurance, scheduling, reporting, tracking, accounting and managing marine RFO’s, SharePoint sites and team meetings.

Reporting Lines:

• Marine Advisor reports directly to the Director, Marine Operations.

Responsibilities:

• Work with marine personnel to ensure safe, reliable, cost effective and environmentally responsible operations
• Assist in the development of procedures for VG LNG terminals
• Support all marine activities across all projects and terminals
• Support VG capital project development and execution, including maintaining RFO, managing timeline etc.
• Work with VG contracting team to develop SOW, contract evaluations, presentations to leadership and contract execution
• Develop, maintain and review marine documents and records related to marine terminal operations, with focusing on continuity between terminals and operational procedures
• Assist in the development and management of marine assets across all projects.
• Provide oversight of regulatory and environmental compliance
• Assist in conduct safety audits to help build a positive safety culture that promotes learning and sharing
• Deliver effective, fit for purpose marine advice, support and problem solving based on best practices, reasonable care standards and due diligence models.
• Operate safely within Industry, Company, National and International standards and regulatory requirements.
• Manage marine SharePoint site, documents and assure there is continuity with all documentation across VG Terminals
• Coordinate and distribute meeting agendas, minutes and action items
• Support audits, inspections and reporting requirements (internal and external)

Qualifications:

• Some marine experience, having knowledge of LNG tankers, COC inspections, LNG terminal inspections etc.
• Bachelor’s degree in Maritime Studies, Business Administration, Logistics, related field or 5 years of work experience
• Familiarity with maritime regulations (USCG, IMO, ISGOTT, SIGTTO)

Experience: 

• This is seen as an entry level position and is ideally suited to someone looking to transiting ashore, or continue to grow and build on their marine background and knowledge
• Basic knowledge, experience and understanding of LNG takers, terminals and coordination roles is not essential, but is beneficial.
• Basic knowledge of project development, from concept, through the contracting execution, overseeing project deliverables, providing report and final inspection and sign of upon completion is not essential, but is beneficial.
• Proficient with IT applications (Power Point, Excel and Word)

Skills

• An acute sensitivity to safety issues in a hazardous environment.
• Ability to work in fast passed, dynamic environment
• Ability to communicate effectively at all levels of an organization 
• Professional, proactive, organized, planning skills, able to manage multiple activities and programs in timely fashion and with a high degree of accuracy, able to meet work deadlines.  
• Problem solving and analytical skills.  
• Must maintain a Transportation Worker Identification Credential (TWIC) card
• Ability to maintain confidentiality and handle sensitive information with discretion

Work Conditions:

• Job is performed in an office and industrial plant environment. 
• National travel can be expected.
• Must be able to board a ship via a gangway, climb to the top of a tank (200+ steps), scale vertical steel ladder up to forty feet or more in height and lift and move objects weighting up to 30 pounds.
• While performing the duties of this job, the employee will work indoors & outdoors, and be exposed to year-around weather conditions, ocean environment, and noise. There is a considerable number of outdoor activities involved. 

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Marine Assurance Specialist. This role will support the development, execution and operations of corporate marine operations throughout VG, working closely with the LNG terminals, Commercial Operations and the Buyers.

General Description: 

The Marine Assurance Specialist is expected to add value to VG and shall provide support to Venture Global LNG (VG) staff, contractors, suppliers, and other personnel involved in the safe operation of the marine facilities at VG’s LNG export terminals. 

The successful Marine Assurance Specialist will apply their marine operations, vetting and nautical knowledge to support all aspects of VG’s marine operations including marine assurance, ship-to-shore interface, and provide support to on-site Marine Coordinators.

Reporting Lines:

• Marine Assurance Specialist reports to the Director, Marine Assurance.

Responsibilities:

Carry out marine assurance on LNG tankers nominated to call at VG LNG terminals, including:

• Work closely with LNG terminal marine departments
• Knowledge and experience of marine assurance, including vetting, terminal compatibility and mooring analysis
• Complete LNG Tanker vetting for nominated vessels, including reviewing SIRE report, Port State and USCG inspection reports etc. against VG vetting standards.
• Have a thorough understanding of terminal compatibility and the process involved when reviewing an LNG tanker against VG terminal requirements
• Have a thorough understanding of Optimoor, including the ability to develop berth and vessel models and databases, complete mooring analysis for nominated LNG tanker
• Maintain LNG tanker records for all LNG tankers nominate and calling at VG terminals.
• Help in the development of a vessel database to store records related to each vessel.
• Work with LNG terminal marine and VG Commercial Ops team to ensure safe, efficient, reliable, cost effective and environmentally responsible cargo transfer operations

Additionally:

• Provide marine and technical assistance to VG Ship Management team, including bunker tanker vetting and discharge terminal compatibility studies
• Complete physical inspections of terminal tugs, escort vessels and workboats
• Provide marine assurance assistance to various VG projects
• Deliver effective, fit for purpose marine advice, support and problem solving based on best practices, reasonable care standards and due diligence models
• Operate safely within Industry, Company, National and International standards and regulatory requirements
• Assist in reviewing and updating VG marine operations documents
• Represent VG at industry conferences and seminars

Qualifications:

• Bachelor’s degree, Nautical Science or Engineering from a maritime academy or accredited university or marine school, or
• Merchant Marine Officer Experience, Licensed – Chief Mate or 2^nd Mate or 1^stAssistant Engineer, or
• Marine experience with the USCG, having knowledge of LNG tankers, COC inspections, LNG terminal inspections etc.

Experience: 

• Experience in vetting, terminal compatibility and mooring analysis
• SIRE accreditation is not essential but would be an advantage
• Experience in sea and shore side roles within the maritime industry
• Terminal experience
• Working on LNG tanker, LPG and oil tankers (preferred)
• Knowledge of LNG tankers and terminal, as well as experience dealing with LNG tanker operations
• Suitable work experience in a related field within the maritime industry may also be considered

Skills: 

• An acute sensitivity to safety issues in a hazardous environment, 
• Ability to work in fast passed, dynamic environment
• Ability to communicate effectively at all levels of an organization 
• Organized, planning skills, able to manage multiple activities and programs in timely fashion and with a high degree of accuracy, able to meet work deadlines.  
• Problem solving and analytical skills.  
• Must maintain a Transportation Worker Identification Credential (TWIC) card

 Work Conditions:

• Job is performed in an office and industrial plant environment. 
• National travel can be expected.
• Must be willing to provide 24/7 coverage for marine assurance on a duty roster system
• Must be able to board a ship via a gangway, climb to the top of a tank (200+ steps), scale vertical steel ladder up to forty feet or more in height and lift and move objects weighting up to 30 pounds.
• While performing the duties of this job, the employee will work indoors & outdoors, and be exposed to year-around weather conditions, ocean environment, and noise. There is a considerable amount of outdoor activities involved. 

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking an experienced leader to join us as a Manager, Sourcing & Contracts within the Procurement function in Houston. This person is responsible and accountable for the sourcing of third-party goods and services for Venture Global LNG Operations.

Responsibilities:

• Manage and continuously develop a team of Sourcing Specialists who are responsible for supporting the day-to-day procurement of specific departmental categories.
• Participate in rigorous and critical contract negotiations with key internal stakeholders including, Legal, Finance and Projects.
• Develop and execute multi-asset procurement strategies that support key business objectives, including strategic sourcing and cost savings.
• Facilitate regular touch points with stakeholders to ensure annual sourcing and contracting plan is maintained.
• Implement best practices in procurement and contracting to support commercial and operational objectives.
• Ensure the execution of standards, controls, policies, procedures and performance metrics to effectively and efficiently manage the acquisition and reporting of third-party spend across assets.
• Drive compliance in all procurement activities by ensuring Company policies and procedures are followed.
• Conduct review meetings with key stakeholders to assess risk, review future strategies, and identify potential cost out and improvement opportunities.
• Identify areas for improvement to continually drive performance and business results.
• Maintain strong working relationships with strategic suppliers to assure cost, quality, and delivery targets are met.
• Update procurement strategies based on changing market conditions and dynamic business needs.

Qualifications:

• Bachelor’s degree in business, supply chain management, engineering or related discipline; MBA or Juris Doctor desired.
• Minimum of ten years supply chain experience, including contracting, in the oil and gas industry; Experience in LNG liquefaction facilities highly preferred.
• Skills:
  • Ability to build relationships and engage with stakeholders across the organization.
  • Understanding of key contractual terms and ability to facilitate discussion with stakeholders accordingly.
  • Demonstrated ability to access risk appropriately and negotiate commercial terms with suppliers with limited Legal support.
  • Demonstrated ability to build and manage supplier relationships and long-term partnerships.
  • Strong knowledge of maintenance practices and operations processes.
  • Ability to effectively lead, delegate and motivate.
  • Able to effectively communicate across various disciplines and with contract counterparties. 
  • Excellent writing skills, including drafting of simple legal documents with accuracy.
  • Ability to prioritize and meet critical deadlines.
  • Attention to detail and ability to manage commercially sensitive and confidential information.
  • Ability to work independently as well as with team members and take direction in a fast-paced and dynamic environment.
  • A strong working relationship and collaborative partner in the interactions of maintenance activities and performance in conjunction with reliable sustained operation.
  • Experience with SAP and Coupa preferred.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

The Maintenance Systems Manager will lead Venture Global’s global CMMS delivery and management efforts within the Operations Services Group, supporting new facility builds, system enhancements, and ongoing operational readiness. This role oversees the end-to-end management of the company’s CMMS (SAP Plant Maintenance), including system configuration and testing, user training, master data governance, and asset lifecycle management to ensure system reliability and data integrity. The successful candidate will collaborate cross-functionally to establish consistent, efficient, and sustainable CMMS practices across all Venture Global facilities.

Key Responsibilities:

Required Qualifications:

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

The Product Service Engineer will be critical in the Owner Furnished Equipment (OFE) Product Service Organization. The Engineer will be a Subject Matter expert and lead the timely and quality resolution of technical issues and drive strategic initiatives to optimize performance critical to the performance and operation of Venture Global Equipment. This role will involve coordinating and collaborating with various stakeholders, including Operations and Engineering teams and equipment suppliers, to ensure the timely and efficient resolution of technical solutions.

Key Responsibilities:

• OFE Management:
• Define and manage key performance indicators (KPIs) to measure the effectiveness of OFE management.
• Develop and implement comprehensive processes and strategies for the management of technical solutions throughout the project lifecycle of OEM equipment.
• Coordinate with Operations and Engineering teams to identify and define technical issues and work with equipment suppliers to effectively resolve and implement solutions to ensure that OFE specifications and requirements are met.
• Oversee Root Cause Analysis and implement Preventative and Corrective Actions to ensure long-term resolutions.
• Risk Mitigation:
• Proactively identify and assess potential risks associated with the operation and maintenance of equipment.
• Develop and implement risk mitigation plans to minimize the impact of potential issues.
• Collaborate with project and operational teams to adequately address OFE-related risks.
• Stakeholder Coordination:
• Build and maintain strong relationships with operational and engineering teams, equipment suppliers, and other relevant stakeholders.
• Facilitate effective communication and collaboration among team members to ensure project success.
• Resolve conflicts and address issues related to OFE delivery and management.
• Performance Monitoring:
• Track the performance of OFE delivery and management processes using data analytics.
• Identify areas for improvement and implement corrective actions to optimize performance.
• Prepare regular reports on OFE performance and status for senior leadership.

Qualifications:

• Bachelor's degree in Engineering, Supply Chain Management, or a related field.
• 15+ years of experience in project management or equipment delivery.
• Strong understanding of the LNG industry and related equipment.
• Strong leadership, communication, and interpersonal skills.
• Excellent problem-solving and decision-making abilities.
• Proven ability to manage complex projects and meet deadlines.
• Proficiency in project management software (e.g., Primavera P6, Microsoft Project).

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

Position Summary:

The Product Service Engineer will play a critical role within the Owner Furnished Equipment (OFE) Product Service Organization. The Engineer will be Subject Matter expert and lead the timely and quality resolution of technical issues and drive strategic initiatives to optimize performance critical to the performance and operation of Venture Global Equipment. This role will involve coordinating and collaborating with various stakeholders, including Operations and Engineering teams, and equipment suppliers, to ensure the timely and efficient resolution of technical solutions.

Key Responsibilities:

• OFE Management:
• Define and manage key performance indicators (KPIs) to measure the effectiveness of OFE management.
• Develop and implement comprehensive processes and strategies for the management of technical solutions throughout the project lifecycle of OEM equipment.
• Coordinate with Operations and Engineering teams to identify and define technical issues and work with equipment suppliers to effectively resolve and implement solutions to ensure that OFE specifications and requirements are met.
• Oversee Root Cause Analysis and implement Preventative and Corrective Actions to ensure long-term resolutions.
• Risk Mitigation:
• Proactively identify and assess potential risks associated with the operation and maintenance of equipment.
• Develop and implement risk mitigation plans to minimize the impact of potential issues.
• Collaborate with project and operational teams to ensure that OFE-related risks are adequately addressed.
• Stakeholder Coordination:
• Build and maintain strong relationships with operational and engineering teams, equipment suppliers, and other relevant stakeholders.
• Facilitate effective communication and collaboration among team members to ensure project success.
• Resolve conflicts and address issues related to OFE delivery and management.
• Performance Monitoring:
• Track the performance of OFE delivery and management processes using data analytics.
• Identify areas for improvement and implement corrective actions to optimize performance.
• Prepare regular reports on OFE performance and status for senior leadership.

Qualifications:

• Bachelor’s degree in engineering or a related field.
• 15+ years of experience
• Understanding of the LNG industry and related equipment.
• Strong leadership, communication and interpersonal skills.
• Excellent problem-solving and decision-making abilities.
• Proven ability to manage complex projects and meet deadlines.
• Program and/or project management skills with a working knowledge of project management software (e.g., Primavera P6, Microsoft Project

Preferred Experience:

Experience in one or more of the following areas or with specified equipment is desired:

• General gas compressor and liquid pump design, operation, or servicing
• Gas compression and pumps, specifically associated with LNG plants
• Product Service with understanding of product Service workflow, tools and processes including root cause analysis.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Senior I&C Engineer located in Houston, TX.

General Description:

TheSenior I&C Engineer, with guidance from the Automation Director, is responsible for leading the engineering, development, and maintenance of the Control systems associated with Venture Global’s system of pipelines. The primary responsibility is Turbine Controls but may have some overlap with balance of plant systems.

This role will have a significant impact with development of new projects and pipeline systems, and will have a role in specifying and reviewing engineering deliverables pertaining to turbine control systems.  Knowledge of interstate pipeline systems and regulations also preferred.

Responsibilities:

• Technical leadership for engineering efforts with gas compression control systems;
• Technical leadership for engineering efforts with balance of plant control systems;
• Provide mentorship for junior engineers to promote understanding of control systems;
• Provide support to field technicians with control system troubleshooting;
• Provide technical expertise in programming GE Mark Vie DCS systems;
• Coordinate or develop efforts to backup, maintain, and version manage configuration and program files;
• Coordinate computer backup of machines in the plant environment;
• Provide project management support for control systems changes and specifications

Qualifications:

Education and Certifications:

Education:

• Bachelor’s degree in Engineering or other technical discipline. Experience may be considered in lieu of a degree

Experience:

• 5+ years of experience in I&C engineering roles;
• 5+ years of experience supporting turbine control systems;
• 5+ years of experience commissioning control systems;
• Working knowledge of a variety of industrial communications protocols;
• Working knowledge of IT and OT systems supporting control systems;
• Expeirence with long haul interstate pipeline systems;
• Knowledge of computer networking in a plant environment

Skills:

• GE Mark VIe programming and troubleshooting experience required;
• Experience with high speed turbine data acquisition preferred;
• Experience programming Rockwell and Allen Bradley products preferred;
• Experience with configuring and troubleshooting industrial communications protocols such as:
  • Modbus;
  • Device Net;
  • MQTT;
  • Ethernet / IP;
  • Serial RS232/485
• Experience with configuration and troubleshooting of local HMI systems;
• Experience preferred configuring and troubleshooting third party communications devices such as Red Lion, Pro Soft, among others;

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

Position Overview

Venture Global is seeking a Principal Engineer, Rotating Equipment to join our Pipeline Engineering team in Houston, Texas.

This role will serve as the technical authority for all pipeline rotating equipment systems and will oversee activities spanning the complete equipment life cycle — from specification and selection, through commissioning and startup, and continuing through long-term operation, maintenance, and reliability monitoring.

The Principal Engineer will ensure that design and operational decisions support maximum equipment uptime, safety, and cost-efficiency, and will guide both internal teams and external engineering partners to achieve consistent reliability and best-in-class performance of turbomachinery assets across Venture Global’s pipeline compressor station facilities.

Key Responsibilities

Equipment Specification and Selection

• Define and validate technical requirements for rotating equipment, including gas and steam turbines, compressors, pumps, motors, and related auxiliaries.
• Review vendor proposals and engineering deliverables to ensure alignment with Venture Global’s operational strategy, reliability targets, and technical standards.
• Collaborate with EPCM and OEM partners during design development to ensure optimal equipment configuration and materials selection for long-term maintainability and performance.

Commissioning and Startup

• Advise on pre-commissioning, commissioning, and startup activities, ensuring that manufacturer recommendations and operational requirements are met.
• Support field teams with performance testing, vibration analysis, and acceptance validation of rotating equipment systems.
• Coordinate issue resolution between operations, maintenance, and vendor teams during early operational phases.

Operations and Maintenance

• Provide day-to-day technical support for equipment performance, troubleshooting, and maintenance optimization across operating facilities.
• Review predictive maintenance data and vibration analysis reports; ensure prompt and accurate interpretation leading to actionable recommendations.
• Drive Reliability Centered Maintenance (RCM) improvements and ensure maintenance plans are cost-effective, safe, and aligned with reliability goals.
• Support turnaround planning and execution with detailed technical scope input, risk assessments, and resource coordination.

Reliability Monitoring and Improvement

• Implement and manage condition monitoring and reliability tracking systems, ensuring equipment health indicators are properly analyzed and acted upon.
• Develop Key Performance Indicators, including MTBR and MTBF, and the development and oversight to a Reliability Improvement Team in pursuit of continuous improvement.
• Lead Root Cause Failure Analysis (RCFA) exercises and produce comprehensive failure reports with recommended corrective actions.
• Identify opportunities for design, maintenance, or operational improvements across the fleet to reduce downtime, unplanned outages, and cost of ownership.
• Promote standardization and reduced interfaces across engineering, operations, and vendor teams to improve consistency and communication through the asset life cycle.

Leadership and Mentorship

• Serve as the pipeline organization’s subject matter expert for rotating equipment, mentoring less experienced engineers and technicians.
• Foster collaboration with Venture Global’s Terminal Engineering and Maintenance Teams, EPCM partners and OEMs, ensuring that reliability and maintenance considerations are embedded in all life cycle stages.

Qualifications

Education and Certifications

• Required: Bachelor’s degree in Mechanical Engineering or relevant technical discipline (required).
• Preferred: Professional Engineering (PE) license.

Experience

• Minimum 15 years of engineering experience in rotating and mechanical equipment within the natural gas pipeline industry.
• Proven expertise across the entire equipment life cycle — specification, selection, commissioning/startup, operations, maintenance and reliability monitoring and improvement.
• Extensive knowledge of gas turbines (Frames and Aero-derivatives), compressors, and associated systems such as couplings, bearings, lubrication systems, and dry gas/mechanical seals.
• Extensive experience with major turbomachinery OEMs, including Baker Hughes, Siemens and Solar.
• Strong background in compressor performance evaluation, vibration analysis, and reliability analytics.
• Extensive experience with key pipeline codes and standards, such as 49 CFR Part 192, ASME B31.8, and API 616, 617 and 692.

Technical Skills

• Proficiency in RCFA and RCM methodologies.
• Working knowledge of CMMS systems and condition monitoring software (e.g., Bently Nevada or equivalent).
• Familiarity with engineering documentation (P&IDs, equipment specs, wiring diagrams, maintenance procedures).
• Ability to synthesize technical data into clear operational recommendations.
• Development of governing standards and procedures.

Soft Skills

• Excellent communication, collaboration, and problem-solving skills.
• Able to lead multidisciplinary teams and coordinate with external stakeholders effectively.
• Strong leadership and mentoring capabilities, fostering technical excellence and reliability culture.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Senior Engineer, Instrument & Controls to join our team in Houston, TX

This role reports to the Manager of Instrumentation and Controls.

The role will be part of the team responsible for ensuring that the Plant Instrumentation and Control Systems operate as per design, in a safe and reliable manner with minimal downtime. 

Responsibilities:

• Apply technical expertise to support design, installation, commissioning, and operation of instrument and controls systems as subject matter expert.
• Troubleshoot and solve controls logic and communication issues.  
• Participate in check out of cause and effects, complex loops, etc.

Qualifications:

• Education and Certifications: 
• Minimum Bachelor’s degree in Controls, Instrument or Electrical Engineering
• A Professional Engineering License or eligibility for registration. 

• Experience: 
• A minimum of five-ten years’ experience working in a senior engineering capacity, with Instrument & Controls equipment in an industrial setting in engineering or operations.
• Oil and Gas experience is required, with preference in LNG applications, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable.
• Good working knowledge of motors, gas turbines (Frames & Aero-derivatives) and compressors is required 
• Additional Skills: 
• Working knowledge of CMMS Systems
• RCFA tools for conducting failure analysis

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

Position Overview:

The Invoice Analyst will provide invoice reviews on a cost-reimbursable LNG mega project.  Our Invoice Analysts have a business and project controls oriented background with an industry understanding of how basic industry standards can be effectively applied to invoice reviews.  Our Invoice Analyst is responsible for achieving safe, cost effective, timely and contractually compliant project results.

An Invoice Analyst thrives in challenging environments and accomplishes difficult assignments without significant supervision and instruction.  Our Invoice Analysts complete goals on time, possess strong attention to detail, perseveres through tough obstacles,  and does not get easily discouraged.

Key Responsibilities and Essential Duties:

• Lead a Safe work culture.
• Provide analysis to project teams and operating plants by providing communication, coordination and follow-up to meet project goals and objectives.
• Review, analyze, and understand contracts and exhibits for Agent For Contractors, Contractors, and Subcontractors
• Oversee specific section of project invoicing and reporting of Agent For Contractors, Contractor, and Subcontractors
• Ensure a 3-way match is being utilized by Agent For Contractors, Contractor, and Subcontractors during invoicing process.
• Perform and understand time vs. clock analysis on Agent For Contractors, Contractor, and Subcontractors.
• Analyze and understand Agent For Contractors, Contractor, and Subcontractor commitments to ensure appropriate committed values are utilized and committed values are reduced when no longer needed.
• Utilize and understand standard analytics through PowerBI
• Oversight of Accounts Payable approvals and ensuring invoices are reviewed and approved in a timely manner.
• Understand industry standards and utilize those standards in review of craft and staff labor, staffing plans, construction equipment, construction equipment plans, etc.
• Support cost mitigation of project challenges through creative and innovating problem solving.
• Other responsibilities as assigned.

Job Qualifications

• 2+ years of relevant business and/or cost experience on major Oil & Gas Engineering and Construction projects specifically related to project invoicing.
• Experience with LNG Liquefaction or Combined Cycle Power Generation projects preferred.
• Ability to perform and prioritize multiple tasks and work within project deadlines, and adjust as priority changes occur in an efficient and effective manner.
• Exhibit excellent written and oral communication skills.
• Have advanced computer experience and knowledge of Microsoft Office suite and other project related software.
• Intermediate proficiency with Excel is required. 
• Excellent attention to detail and ability to efficiently summarize and prioritize information.
• Ability to work nights and weekends as required.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

Position Summary:

The Product Service Engineer will be a critical role within the Owner Furnished Equipment (OFE) Product Service Organization. The Engineer will be a Subject Matter expert and lead the timely and quality resolution of technical issues and drive strategic initiatives to optimize performance critical to the performance and operation of Venture Global Equipment. This role will involve coordinating and collaborating with various stakeholders, including Operations and Engineering teams and equipment suppliers, to ensure the timely and efficient resolution of technical solutions.

Key Responsibilities:

• OFE Management:
• Define and manage key performance indicators (KPIs) to measure the effectiveness of OFE management.
• Develop and implement comprehensive processes and strategies for the management of technical solutions throughout the project lifecycle of OEM equipment.
• Coordinate with Operations and Engineering teams to identify and define technical issues and work with equipment suppliers to effectively resolve and implement solutions to ensure that OFE specifications and requirements are met.
• Oversee Root Cause Analysis and implement Preventative and Corrective Actions to ensure long-term resolutions.
• Risk Mitigation:
• Proactively identify and assess potential risks associated with the operation and maintenance of equipment.
• Develop and implement risk mitigation plans to minimize the impact of potential issues.
• Collaborate with project and operational teams to adequately address OFE-related risks.
• Stakeholder Coordination:
• Build and maintain strong relationships with operational and engineering teams, equipment suppliers, and other relevant stakeholders.
• Facilitate effective communication and collaboration among team members to ensure project success.
• Resolve conflicts and address issues related to OFE delivery and management.
• Performance Monitoring:
• Track the performance of OFE delivery and management processes using data analytics.
• Identify areas for improvement and implement corrective actions to optimize performance.
• Prepare regular reports on OFE performance and status for senior leadership.

Qualifications:

• Bachelor’s degree in engineering or a related field.
• 15+ years of experience
• Understanding of the LNG industry and related equipment.
• Strong leadership, communication and interpersonal skills.
• Excellent problem-solving and decision-making abilities.
• Proven ability to manage complex projects and meet deadlines.
• Program and/or project management skills with a working knowledge of project management software (e.g., Primavera P6, Microsoft Project).

Preferred Experience:

Experience in one or more of the following areas or with specified equipment is desired:

• General design, application, operational reliability, and servicing of Advanced Control Systems for gas turbine-based power applications such as combined cycle or simple cycle power plants or mechanical drive applications.
• Specific experience with GE Vernova’s Mark VIe control system software and hardware
• Understanding of advanced control and sensor applications for operational flexibility, RAM optimization, and data collection for general equipment health monitoring, for diagnostics and prognostics, and general optimal plant operation.
• Familiarity with GE Vernova’s LM2500/LMX or similar aeroderivative gas turbines, GE Vernova’s 7EA Gas Turbine and associated equipment, or Baker Hughes gas turbine products specifically their M35 Gas Turbine.
• Product Service with understanding of product Service workflow, tools and processes including root cause analysis.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of SCADA Senior Engineer located in Houston, TX.

General Description:

The SCADA (Supervisory Control and Data Acquisition) Senior Engineer, with guidance from leadership, is responsible for the development and maintenance of the SCADA systems associated with Venture Global’s system of pipelines. Knowledge of interstate pipeline operations, API pipeline SCADA recommended practices, and DOT regulations, along with a service minded attitude is crucial to the role.

This role will require a ground up design of a SCADA system and control center with the aid of contractors and control room management experts.  The ideal candidate will be comfortable working in a fast paced environment where changing requirements will be expected. 

This position will be full time in-person in the Venture Global downtown office.

Responsibilities:

• 5+ years of experience in SCADA development for pipeline applications required;
• Field investigation work to determine the existing equipment and configurations on existing equipment;
• Field work to interface with existing LNG plant employees to ensure we are both fulfilling their needs and concerns but most importantly not violating FERC regulations;
• Participate in the development of Control Room Management (CRM) procedures as defined in 49 CFR 192.631;
• Work with control room management to ensure SCADA displays are designed and styled considering API RP 1165;
• Working knowledge of FERC regulations regarding separation of personnel and information interface with common carrier pipelines and customers;
• Assist in development of leak detection programs aligning with API RP 1130 and API RP 1175;
• Accountable for preparation for and representation in Control Room Audits both internal and PHMSA;
• Accountable for the development and maintenance of internal SCADA procedures;
• Ensure all changes to the SCADA system are governed by the MOC (Management of Change) process;
• Be able and prepared to respond to after hours emergency call-outs;

Qualifications:

Education and Certifications:

Education:

• Bachelor’s degree in Engineering or Computer Science. Experience may be considered in lieu of a degree

Experience:

• Knowledge of OSHA, EPA, FERC, DOT / PHMSA rules and regulations;
• Familiarity with CFR 49 part 192;
• Familiarity with implementing API RPs for SCADA, alarm management, leak detection, and cyber security;
• Knowledge of control systems programming and interpretation is beneficial to the role;
• Knowledge of measurement systems and flow computers along with their configuration is beneficial to the role;
• Knowledge of pipeline instrumentation is beneficial to the role;
• Familiarity with multiple communications protocols commonly used with programmable logic controllers and industrial communications

Skills:

• Experience SCADA implementation;
• Programming and scripting in multiple languages;
• SQL knowledge and SQL query development knowledge preferred;
• Knowledge of revision / version management;
• Experience with Microsoft Reporting Services;
• Experience with Aveva Pi preferred;
• Experience with autosol ACM;
• Ability to perform forensic analysis on incidents with SCADA data;
• Analytical, problem solving, and decision-making skills

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Associate Engineer, Instrument & Controls to join our team in Houston, TX

This role reports to the Manager of Instrumentation and Controls.

The role will be part of the team responsible for ensuring that the Plant Instrumentation and Control Systems operate as per design, in a safe and reliable manner with minimal downtime. 

Responsibilities: 

• Candidate will develop knowledge and understanding of the complete Plant Instrument and Control system equipment and will be assigned tasks including but not limited to:  

• • Field Instrumentation for process measurement (e.g., Pressure, Temperature, Level, Flow, etc.)  Control Valves, Shutdown Valves (Air, Gas, and Motor Operated), Analyzers (H2S, Moisture, etc.) Gas Chromatographs, Flow Metering Systems (Ultrasonic, Coriolis, Differential Pressure, etc.) and their transmission systems (e.g. 4-20mA, Hart, etc.).
  • Plant Instrumented Control and Safety Systems, Fire and Gas Systems, and Programmable Logic Controllers.
  • Schematic drawings, location drawings.
  • Support the development of:  
  • Field instrumentation specification and data sheets
  • Key Performance Indicators & Metrics for Instrument and Controls
  • Instrument control drawings and databases.
  • Instrument Requisition and Technical Evaluation.
  • P&IDs
  • Support with the Management of Change (MOC) process
  • Support Root Cause Failure Analysis (RCFA) process 

Qualifications: 

• BS. or higher degree in Electrical, Electronics, or Computer Engineering, preferably with specialization in Process Control, Control systems, and Instrumentation.
• One (1) to four (4) years’ experience working as an Engineer in a process plant environment would be a plus. 

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. 

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost

We are seeking an experienced Specialist, CCMS to join in our Houston, TX office. 

Responsibilities:

• Support and serve as a workstream lead for CMMS - Plant Maintenance Master Data builds or Upgrades, development & loading for assets / projects.
• Collaborate with cross-functional teams, including technical, functional, and business teams.
• Create and maintain CMMS training materials as well as conduct training sessions for end-users
• Provide first level support to users for SAP PM and SAP MM related issues, including triage and escalation of technical problems.
• Lead testing and validation of system upgrades and enhancements related to SAP PM and SAP MM.  This includes creating test scenarios and scripts, staging test data, reporting issues to the technical team and recording test results.
• Act as Subject matter expert for SAP Computerized Maintenance Management System (CMMS) strategically partnering with maintenance & operations to:
• Manage master data via governance and controls & ensure consistent use of fields within master data records.
• Support development and delivery of systems training to ensure all users are properly trained in system functionality & business use expectations.
• Oversee the data integrity and day to day operation of the CMMS system.
• Provide end-to-end support for SAP PM / MM processes, including archive and restore data; support and maintain the CMMS System reports; run queries and create ad hoc reports.
• Support any CMMS System Upgrade Projects
• Work across Global teams to collaborate, learn, and share new process rollouts.
• Validate mass data loads required for migration from legacy systems or during system implementation.
• Work with the Information Management team to ensure delivery of quality data from EPC and other contractors to populate the CMMS.

Skill Requirements:

• 5+ years of direct CMMS build experience
• Knowledge on Maintenance Strategies, Philosophies, & PM Optimization methods
• Create/Validate Maintenance Items & Plans
• Create/Validate Task list and Standard text
• Understanding of Workflows of Plant Maintenance system
• Bill of material creation and assign to task list
• Knowledge of preventive maintenance, maintenance plans, time/strategy-based Maintenance, breakdowns, and all types of repair processes.
• Knowledge of all master data objects required to support SAP PM (bills of material, equipment Master, functional locations, work Center etc).
• Experience with SAP S/4 HANA PM & MM Modules
• Experience working on MDG implementation on SAP S/4 HANA is a plus.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Senior Associate for our Construction Finance team. This position will aid the Construction Finance team in budgeting, forecasting, variance reporting and analysis of our multi-billion-dollar capital projects. You will effectively communicate results to senior leaders to enable and enhance decision making. This person will be based in Houston, TX. 

 Responsibilities:

• Responsible for financial management of specific business area(s)
• Developing and managing budgets
• Reporting actuals
• Variance analysis
• Trend and forecast updates
• Liquidity management
• Change management
• Contract review
• Supplier risk analysis
• Understand and assist with accounting treatments
• Provide data-driven insights to drive business decisions
• Executive level presentations on financial results
• Monthly, quarterly, and annual reporting
• Support external reporting requirements
• Ad-hoc reporting as requested
• Develop relationships with key stakeholders within your business area, including project controls, construction, engineering, development, accounting and leadership, to gather data and align financial goals
• Continual process improvement to streamline financial processes, enhance reporting tools, and building financial models

Qualifications:

• Bachelor’s Degree in Finance, Economics, Accounting or relevant field
• 4+ years of experience in Finance, Cost Engineering, Project Controls, Accounting or related field
• Demonstrated analytical and quantitative abilities, and understanding of key financial concepts
• Ability to self-direct work in an unstructured, fast paced environment, and comfortable with ambiguity
• Excellent interpersonal effectiveness with the ability to influence and challenge
• Strong oral and written communication skills with the ability to simplify complex issues and present key details and conclusions
• Proactive problem solving mindset to achieve business and financial objectives
• Ability to collaborate effectively in a team and build strong relationships with stakeholders at all levels
• Demonstrated initiative and ownership of work with strong attention to detail
• High level of ethics, intergrity and emotional intelligence with ability to maintain confidentiallity
• Proficient in Excel, PowerPoint and Financial Modeling
• Willing to report in office, daily
• Occasional travel to construction site(s) or Arlington office will be required

 Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a leader to join us as a Lead Engineer, Piping. The Lead Piping Engineer is responsible for analyzing and overseeing the design of piping systems ensuring that the systems are efficient, safe and meet all regulatory standards.

This position will be located in Houston, TX.  Travel may be required depending on project location. This is an in-office position Monday-Friday schedule.

Responsibilities:

Project Leadership:

• Responsible for the entire piping scope on assigned projects, including work done in overseas offices. 
• Responsible for all subsections of the piping discipline including, stress analysis, material specification, design and material take-off.
• Develop, oversee, and ensure adherence to project timelines, budgets, and deliverables.
• Track and report progress during project execution.
• Coordinate with project managers, engineers, and clients to clarify scope and objectives.

Piping Design and Engineering:

• Provide guidance on complex piping systems using best engineering practices.
• Review piping layouts, isometrics, and 3D models as well as the work performed by overseas offices.
• Ensure compliance with project specifications, standards, codes (ASME, API), and best practices.
• Conduct stress analysis, material selection, and pipe routing optimization.
• Provide procurement support for piping items (specialty items, pipe supports, valves, etc.).
• Ensure the check and release of various piping deliverables/documents for use by downstream parties.

Team Supervision:

• Conduct regular design reviews and ensure alignment across disciplines.
• Foster a collaborative and efficient team environment.

Coordination and Communication:

• Liaise with other engineering disciplines (civil, structural, mechanical, electrical, instrumentation, process safety) to ensure seamless integration of piping systems.
• Review and approve vendor drawings.
• Participate in design reviews, HAZOP studies, and project presentations.
• Address technical queries and manage design changes effectively.

Quality Assurance:

• Implement quality control measures and conduct regular design audits.
• Ensure deliverables meet project and regulatory standards.
• Address any issues or risks that could impact project delivery

Qualifications:

Education and Experience:

• Bachelor’s degree in Mechanical Engineering, or equivalent (preferred).
• Minimum 10-15 years of piping design experience using 2D/3D software. Good knowledge of Piping design of LNG projects.

Technical Skills:

• Proficiency in design review software like SmartPlant Review and Navisworks.
• Strong knowledge of piping codes and standards (ASME, ANSI, API, and PIP).
• Proficiency in material identification and selection.
• Strong knowledge of Cesar II and pipe stress analysis reports for all common systems of piping.
• Experience with LNG projects is preferred.
• Strong knowledge of AIV and FIV principles and screening is preferred
• Proficiency in development of piping material class specifications is preferred
• Strong knowledge in NDE and testing requirements of piping systems is preferred
• Proficiency in valve application and specification is preferred

Leadership and Communication:

• Proven ability to lead and mentor teams.
• Excellent communication, problem-solving, and decision-making skills.
• Strong organizational skills and ability to manage multiple priorities.

 Additional Skills:

• Familiarity with construction and installation practices.
• Understanding of project management principles.
• Experience with international projects and multicultural teams is a plus.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

Position Summary:

The Product Service Engineer will play a critical role within the Owner Furnished Equipment (OFE) Product Service Organization. The Engineer will be Subject Matter expert in Vibration, rotor train dynamics, and Bearing Systems and lead the timely and quality resolution of technical issues and drive strategic initiatives to optimize performance critical to the performance and operation of Venture Global Equipment. This role will involve coordinating and collaborating with various stakeholders, including Operations and Engineering teams, and equipment suppliers, to ensure the timely and efficient resolution of technical solutions.

Key Responsibilities:

• OFE Management:

• Define and manage key performance indicators (KPIs) to measure the effectiveness of OFE management.
• Develop and implement comprehensive processes and strategies for the management of technical solutions throughout the project lifecycle of OEM equipment.
• Coordinate with Operations and Engineering teams to identify and define technical issues and work with equipment suppliers to effectively resolve and implement solutions to ensure that OFE specifications and requirements are met.
• Oversee Root Cause Analysis and implement Preventative and Corrective Actions to ensure long-term resolutions.
• Risk Mitigation:
• Proactively identify and assess potential risks associated with the operation and maintenance of equipment.
• Develop and implement risk mitigation plans to minimize the impact of potential issues.
• Collaborate with project and operational teams to ensure that OFE-related risks are adequately addressed.
• Stakeholder Coordination:
• Build and maintain strong relationships with operational and engineering teams, equipment suppliers, and other relevant stakeholders.
• Facilitate effective communication and collaboration among team members to ensure project success.
• Resolve conflicts and address issues related to OFE delivery and management.
• Performance Monitoring:
• Track the performance of OFE delivery and management processes using data analytics.
• Identify areas for improvement and implement corrective actions to optimize performance.
• Prepare regular reports on OFE performance and status for senior leadership.

Qualifications:

• Bachelor’s degree in engineering or a related field.
• 15+ years of experience
• Understanding of the LNG industry and related equipment.
• Strong leadership, communication and interpersonal skills.
• Excellent problem-solving and decision-making abilities.
• Proven ability to manage complex projects and meet deadlines.
• Program and/or project management skills with a working knowledge of project management software (e.g., Primavera P6, Microsoft Project).

Preferred Experience:

Experience in one or more of the following areas or with specified equipment is desired:

• General gas turbine design, operation, or servicing
• Specific knowledge of GEV 7EA, GE LM2500/LMX, and Baker Hughs gas turbines
• Rotating Equipment Train Dynamics and associated testing, rotor balancing, monitoring and diagnostics, and understanding of vibration acceptance limits for safe operation 
• Manufacturing and Assembly Processes and Field Installation (Shaft Alignment)
• Vibration Analysis, troubleshooting, and Modal Test (e.g., Impact Hammer, Shaker Test)
• Bearing design and lube oil systems, instrumentation, and monitoring
• Considerations for Rotor Axial thrust, measurement, and balancing concepts
• Knowledge of codes/standards related to rotor dynamics, bearings, and lube oil systems
• Product Service with understanding of product Service workflow, tools and processes including root cause analysis.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a strategic, technically skilled Systems Administrator to support critical project cost systems. The incumbent will work closely with our Project Controls team in administer, configure and support EcoSys and related cost reporting applications. 

This position reports to the Manager, Enterprise Applications.

Responsibilities:

• Administer and configure modules, settings and workflows for EcoSys in production and non-production environments based on operational needs.
• Provision users following the principle of least privileged access. Must be able to support complex permissions and data visibility based around contracts, scopes of work and WBS and funding relationships.
• Translate business needs into actionable functional and technical requirements
• Monitor EcoSys system performance and work with vendor to resolve any problems with performance.
• Coordinate upgrades working with vendor, following IT change management processes
• Create and support existing custom reports, dashboard and data visualizations tailored to business use cases, including using excel Cost and CapEx template reporting with VBA code for formatting and report generation
• Develop and maintain EcoSys API integrations with ERP platforms
• Support customized configuration within the ECOSYS contract module
• Perform complex data analysis to support project cost control team
• Create and maintain master data including but not limited to WBS structures, contract lines, and security groups for scopes of work
• Triage and resolve incidents, performing root cause analysis for problems when appropriate
• Analyze and organize incoming work, providing level of effort and work breakdown for enhancement requests
• Provide technical troubleshooting, end user support and ongoing platform education.
• Perform work in accordance with VGLNG policies, procedures, and strategic direction, as well as regulatory standards governing VGLNG.
• Responsible for other applications as assigned by Manager such as O3.
• Performs other duties as assigned.

Qualifications:

• Bachelor’s degree from an accredited institution, with degree preferred in Computer Science or Information technology systems security or related field.
• Minimum of seven (7) years of hands-on experience with EcoSys administration, configuration and enhancement
• Software development experience required
• Understanding of software and hardware system architecture
• Experience in REST API’s, web services and integration tools
• Excellent analytical skills
• Proficiency in SQL, JavaScript, VBA and data visualization/reporting platforms.
• Effective oral and written communication skills, with an ability to communicate complex issues to a non-technical audience.

Preferred Skills:

• Demonstrated ability to understand a demanding, technical, and complicated construction program

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Process Safety Engineer to join our team in Houston, TX with travel to site as required by Supervisor.  This role reports to the Manager, Process Safety and will be responsible for ensuring that operations are conducted safely, efficiently, and effectively.

This position is located in our Downtown Houston office and is a Monday - Friday in-office positions.

Key Responsibilities/Accountabilities:

• Provide technical and engineering leadership on all process safety management elements such as MOC, PSSR, PHA, building siting, process design.
• Provide process safety and engineering guidance to communicate and evaluate process safety risks.
• Ability to recommend and implement process safety improvement opportunities by staying abreast of industry trends and technology.
• Day to day guidance of Process Safety Barrier Health reporting.
• Responsible for management/leadership on PHA/LOPA teams, including review and approval of associated action items.
• Responsible for leadership in process safety event (PSE) investigations.
• Assist in developing and delivering training programs, keeping them updated in accordance with changes in technology and industry best practices.
• Responsible for providing technical assurance on overall operational risk. These processes include:
• Car sealing
• Procedures – initial start-up and SOP and red line revisions
• Process Safety Event Reporting
• 5-why or root cause analysis (RCA)
• Permit to Work
• SIMOPs
• Inhibits / Bypasses 
• Safety Critical Element management
• Pre-startup Safety Reviews
• Monitoring process safety metrics and analyzing data to identify trends and outliers and to make recommendations as needed.
• Participate in Pre-Start-Up / Readiness Reviews for major equipment commissioning activities.
• Participate in Go-no-Go reviews.
• Ability to interface with Contractor CSU team, engineering, and operations departments.
• Ability to influence the culture of process safety.

Basic Qualifications:

• Bachelor’s degree in Chemical/Process or Mechanical Engineering. Based on experience, other Engineering disciplines will be considered.
• 7-10 years of experience with preference in LNG or oil and gas. Other industry experience will be considered.
• Experience in design, implementation and management of safety systems and processes.
• Strong understanding of safety regulations and best industry practices/codes with demonstrated application.
• Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing status.

Key Characteristics:

• Forward thinking with the ability to identify improvement opportunities, proactively engaging all sites.
• Asks targeted questions to ensure that the right solutions are discussed and implemented.
• Result oriented.
• Clear communicator – ability to provide clear guidance and expectations.
• Ability to communicate the process safety message in a respectful manner, taking into consideration ideas from others.
• Ability to mentor and coach junior engineers.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a leader to join us as a Senior Engineer, Piping. The Senior Piping Engineer is responsible for analyzing and overseeing the design of piping systems ensuring that the systems are efficient, safe and meet all regulatory standards. This position will be located in Houston, TX.  Travel may be required depending on project location. This is an in office position Monday-Friday schedule.

Responsibilities:

Project Leadership:

• Responsible for the entire piping scope on assigned projects, including work done in overseas offices. 
• Responsible for all subsections of the piping discipline including, stress analysis, material specification, design and material take-off.
• Develop, oversee, and ensure adherence to project timelines, budgets, and deliverables.
• Track and report progress during project execution.
• Coordinate with project managers, engineers, and clients to clarify scope and objectives.

Piping Design and Engineering:

• Provide guidance on complex piping systems using best engineering practices.
• Review piping layouts, isometrics, and 3D models as well as the work performed by overseas offices.
• Ensure compliance with project specifications, standards, codes (ASME, API), and best practices.
• Conduct stress analysis, material selection, and pipe routing optimization.
• Provide procurement support for piping items (specialty items, pipe supports, valves, etc.).
• Ensure the check and release of various piping deliverables/documents for use by downstream parties.

Team Supervision:

• Supervise, mentor and provide guidance to junior designers and drafters.
• Conduct regular design reviews and ensure alignment across disciplines.
• Foster a collaborative and efficient team environment.

Coordination and Communication:

• Liaise with other engineering disciplines (civil, structural, mechanical, electrical, instrumentation, process safety) to ensure seamless integration of piping systems.
• Review and approve vendor drawings.
• Participate in design reviews, HAZOP studies, and project presentations.
• Address technical queries and manage design changes effectively.

Quality Assurance:

• Implement quality control measures and conduct regular design audits.
• Ensure deliverables meet project and regulatory standards.
• Address any issues or risks that could impact project delivery

Qualifications:

Education and Experience:

• Bachelor’s degree in mechanical engineering (preferred).
• 10+ years of experience in piping layout, design and or engineering in the petrochemical industry, with at least 3 years in a leadership role.

Technical Skills:

• Proficiency in design review software like SmartPlant Review and Navisworks.
• Strong knowledge of piping codes and standards (ASME, ANSI, API, and PIP).
• Proficiency in material identification and selection.
• Strong knowledge of Cesar II and pipe stress analysis reports for all common systems of piping.
• Experience with LNG projects is preferred.
• Strong knowledge of AIV and FIV principles and screening is preferred
• Proficiency in development of piping material class specifications is preferred
• Strong knowledge in NDE and testing requirements of piping systems is preferred
• Proficiency in valve application and specification is preferred

Leadership and Communication:

• Proven ability to lead and mentor teams.
• Excellent communication, problem-solving, and decision-making skills.
• Strong organizational skills and ability to manage multiple priorities.

 Additional Skills:

• • Familiarity with construction and installation practices.
  • Understanding of project management principles.
  • Experience with international projects and multicultural teams is a plus.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. 

We are seeking Principal Engineer, Mechanical to join our team in Houston. This position is a Monday - Friday in-office. 

Responsibilities:

• Lead engineering design, scope refinement, cost estimating, development of project design specifications, and support construction
• Oversee project activities of third party project managers, engineers, construction managers, inspectors, and contractors
• Influence decisions that improve reliability and operability, reduce operating costs, and create a sustainable competitive advantage
• Translate project plans into coherent, credible, realistic project schedules
• Specifying equipment and major materials for procurement
• Providing in the field construction assistance
• Understand industry standards, applicable regulatory codes and requirements, and company standards
• Single point accountability for the technical execution and related aspects to achieve project objectives and business intent
• Ensure overall project technical quality and conformance to plan (scope, budget & schedule).
• Support Change Management functions, Value Improvement Practices, Bid Evaluations, Process and Implementation studies

Qualifications:

• Bachelor of Science degree in Engineering from an accredited university
• Minimum of twelve years combined experience in Design, Commissioning, or Operations of Cryogenic Processes
• Minimum of five years multi-discipline engineering management experience
• Experience in LNG liquefaction facilities highly preferred
• Ability to perform multiple tasks and work within project deadlines, and adjust as priorities changes occur
• Possess the ability to mentor others through technical training and guidance on planning, scheduling, and engineering subjects
• Have the ability to read and interpret engineer drawings to include P&IDs, PFDs, C&Es, One Line Diagrams, Isometrics, and Civil/Structural drawings
• Broad knowledge of Codes, Standards, and Industry Best Practices
• Exhibit excellent written and oral communication skills
• Have advanced computer experience with Microsoft Office, Microsoft Projects, PowerPoint, and Excel

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.