About the Team:

The Recovery team is an integral part of the Cape Canaveral launch site, primarily responsible for the design, construction, and operation of the vessels used to recover the Terran R launch vehicle. This scope includes everything from vessel design and maintenance to the safing and securing of the rocket post-flight. We collaborate closely with teams across the company, including launch pad fluids engineers, rocket engine designers, and vehicle operators.

About the Role:

• Assist in bringing the Terran R Recovery barge from concept layouts to detailed plans, followed by supporting construction and activation efforts
• Responsible for the detailed layout, configuration and implementation of Terran R Recovery Barge systems, including everything from consoles and lighting to thrusters, power distribution, fire suppression and fuel storage
• Support build, activation, and certification of the Recovery vessel subsystems
• Safely support system checkouts for vessel power and dynamics systems
• Support operation and troubleshooting of vessel systems leading up to and during the Terran R flight campaigns
• Work with engineers and technicians to develop guides, plans and training to ensure safe operation of the Recovery vessel

About You:

• Bachelor’s degree in Mechanical Engineering, Marine Engineering, Aerospace Engineering, or a related engineering field from an accredited institution
• At least one (1) year of experience in vessel layout, vessel design, vessel construction, or related marine engineering work
• Demonstrated knowledge of engineering fundamentals and first principles
• Proficiency in computer-aided design (CAD) software
• Experience performing engineering analysis using finite element analysis (FEA), hand calculations, or equivalent analytical methods
• Ability to travel for extended periods as required by business needs, including work in shipyards, offshore locations, and industrial environments
• Ability to communicate effectively with cross-functional teams and stakeholders

Nice to haves but not required:

• Experience safely operating or supporting hazardous systems, including high-pressure, high-voltage, and/or cryogenic systems, in accordance with applicable safety standards
• Experience working with or applying regulatory requirements and standards issued by the U.S. Coast Guard (USCG), NASA, or comparable regulatory bodies
• Experience implementing or supporting dynamic positioning (DP) control systems in high-precision operational environments
• Working knowledge of commercial marine vessel regulations, including vessel design, construction, and operational requirements
• Experience working in shipyard or offshore production environments
• Experience supporting vessel build or retrofit programs

Successful candidates must clear a background check administered by the US government to obtain clearance for on-site work at our government partner location in Cape Canaveral, Florida.

About IEM

Industrial Electric Mfg. (IEM) is the largest independent full-line manufacturer of custom power distribution systems in North America. Founded more than 75 years ago in Fremont, California, IEM grew alongside Silicon Valley and today operates over 1.7 million square feet of manufacturing capacity. With $1B+ in annual sales and 10,000+ commissioned projects across technology, data centers, commercial, energy, utilities, healthcare, industrial, and infrastructure markets, IEM continues to deliver exceptional product quality, dependable service, and the flexibility to meet complex technical requirements at scale.

Position Summary

The Switchgear Application Expert is the senior technical escalation point for complex pre‑sales and post‑sales inquiries related to IEM’s low- and medium-voltage switchgear, switchboards, panelboards, and related distribution products. The role provides Tier‑2 and Tier‑3 support across Pre‑Sales, Order Review, Engineering, Production, Field Services, Quality, Product Management, and Customer Support, ensuring that solutions are technically sound, compliant with codes/standards and UL procedures, and manufacturable at scale. The Application Expert combines deep protection & controls, three‑phase power, and standards knowledge with strong cross‑functional collaboration to de‑risk projects, resolve field issues, and drive continuous improvement.

Ideal Candidate Profile

• Seasoned application or engineer with strong power systems with OEM background and familiar with LV and MV distribution equipment who enjoys being the “go‑to” technical expert.
• Comfortable reviewing complex specifications, single‑line diagrams, CDEs, and relay schemes, and explaining trade‑offs to both technical and non‑technical stakeholders.
• Thrives in a fast‑paced environment balancing urgent escalations with long‑term improvements to standards, tools, and processes.

Key Responsibilities

1. App Expert / Cross‑functional Technical Leadership

• Serve as the primary Application Expert for complex and non‑standard applications of IEM switchgear and related products.
• Act as a technical liaison between Sales, Estimation, Engineering, Production, Field Services, Quality, and Product Management, ensuring consistent interpretation of standards, UL procedures, and IEM practices.
• Identify recurring technical issues and lead or support initiatives to improve standard designs, tools, and documentation.

1. Pre‑Sales Inquiries

• Support Estimation and Inside Sales by validating complex CDEs, custom enclosure footprints, and utility‑interface requirements against IEM standard offerings and UL procedures.
• Review IEM quotes and CDEs for alignment with customer specifications, codes, and IEM practices; provide clear technical clarifications and risk flags.
• Perform in‑depth technical reviews for projects with high technical P&C requirements, paralleling controls, unusual system topologies, or non‑standard configurations.
• Determine when proposed solutions fall outside standard UL procedures or IEM product offerings and coordinate with Development / R&D / Product Engineering to define acceptable alternatives or exceptions.

1. Product Team Support

• Provide structured feedback to Product Management and R&D based on trends in pre‑sales questions, production issues, and field events.
• Participate in product roadmap and design reviews as the “voice of application,” ensuring new offers are practical to apply, commission, and service.
• Support validation of new features or product lines through application testing, documentation review, and internal training for Sales, Engineering, and Field Services.

1. Production Support

• Review and advise on installation methods and minor drawing clarifications when production questions arise.
• Evaluate production/installation defects to determine whether material replacement or limited rework is required.
• Lead major technical reviews when production or QC identifies issues that may impact code compliance, UL procedure adherence, safety, or functionality.
• Confirm that electrical and mechanical designs meet applicable codes, standards, and IEM UL procedures; propose robust solutions that minimize shipment delays, rework, and added cost.
• Act as mediator between Engineering, Production, and QC on complex issues, driving clear decisions and documented resolutions.

1. Engineering Support

• Support design engineers with general design reviews and returned customer submittal comments; clarify specifications and ensure project requirements align with IEM standard practices and UL procedures.
• Confirm UR components are correctly selected and within applicable UL files.
• Own major technical reviews that require deeper analysis, research, and justification to meet challenging design or specification requirements.
• Provide expert guidance on power system configuration, protection & controls, and communication architectures for complex projects.

1. Order Review

• Review order entry and acknowledgment forms against the approved quote, CDE, specifications, and single‑line diagrams; identify discrepancies early and work with Engineering to define technical solutions.
• Collaborate with Engineering and Sales to review “show‑stopper” items identified during Tier‑2 review that cannot be resolved without customer buy‑in.
• Define technically sound alternatives, articulate risks and constraints, and support customer discussions as needed.

1. Customer Support (Post‑Sales)

• Address advanced customer questions on submittals, dimensional changes, and specification clarifications that are not yet formal service issues.
• Provide troubleshooting guidance on equipment based on drawings, settings, and documentation prior to Service engagement.
• Lead complex customer escalations involving design interpretation, protection & controls performance, or systemic issues.
• Participate in technical meetings and root‑cause discussions with key customers and internal stakeholders, ensuring a strong technical basis for decisions.

1. Field Services Support

• Provide diagnostic support for high‑profile site events (e.g., mis‑operations, major outages, arc‑flash incidents, or site stoppages).
• Analyze relay/event logs, test reports, and site conditions to identify root causes and recommend corrective and preventive actions.
• Assist in preparing in‑depth corrective action reports, including independent research and coordination with Engineering, Quality, and Product teams.

1. Quality Support

• Support QC teams on testing requirements, guidelines, and interpretation of standards and UL procedures.
• Complete assigned nonconformance investigations, including analysis of cause, risk, and preventive actions.
• Provide technical research and feedback on major quality events, including arc‑flash or site stoppage incidents, and translate findings into updates to standards, templates, or training.

Qualifications

• Bachelor’s degree in electrical engineering (BSEE) or equivalent technical experience.
• 5+ years of experience in application engineering, design engineering, or field service for low- and/or medium-voltage switchgear, switchboards, or related power distribution equipment.
• Strong knowledge of three‑phase power systems, protection and control schemes, and communication protocols commonly used in power systems.
• Solid understanding of applicable codes and standards (e.g., NEC, UL 891/1558/508A, IEEE/ANSI) and how they apply to IEM products and UL procedures.
• Proficiency in reading and interpreting single‑line diagrams, schematics, wiring diagrams, and mechanical assembly drawings; AutoCAD experience strongly preferred.
• Demonstrated ability to perform structured root‑cause analysis and to lead cross‑functional investigations.
• Strong written and verbal communication skills, with the ability to explain complex technical concepts to both technical and non‑technical stakeholders.
• Proven track record of managing multiple priorities in a fast‑paced, project‑driven environment.

Preferred

• Experience with power system analysis and protection coordination tools.
• Prior experience in a deep technical support, field service, or product engineering role for LV/MV equipment.
• Familiarity with data center, industrial, or utility applications where high reliability and availability are critical.

Workplace Conditions

• Onsite or remote role with primary collaboration with the Application Engineering team, Sales, Engineering, Production, Field Services, and Product Management.
• Occasional meetings with colleagues across time zones may require flexibility in working hours.
• Travel expectations: Minimal; may include periodic visits to manufacturing facilities, project sites, or customer locations for investigations or technical meetings.

Position Summary:

IEM is currently seeking a Manufacturing Engineer (Senior-level) for our Jacksonville, FL location and will report into the Senior Manager of Manufacturing Engineering. The Manufacturing Engineer (Senior-level) is a key technical leader responsible for driving strategic initiatives and delivering robust, scalable, and cost-effective manufacturing solutions. This role oversees the development, optimization, and support of advanced manufacturing processes, with a focus on operational excellence, automation, and continuous improvement. The Manufacturing Engineer (Senior-level) will lead cross-functional efforts to implement cutting-edge technologies, ensure regulatory compliance, and achieve world-class performance in quality, safety, and throughput. This position demands deep expertise in Lean, Six Sigma, process validation, and smart manufacturing systems, as well as strong leadership and mentoring capabilities.

Key Responsibilities:

• Lead the design, development, and deployment of advanced manufacturing processes and production systems across new and existing product lines.
• Drive automation and Industry 4.0 initiatives to enable smart, data-driven manufacturing and improve operational agility.
• Serve as the technical authority in cross-functional teams involving operations, quality, R&D, and supply chain to ensure product manufacturability, scalability, and cost-effectiveness.
• Facilitate and lead high-impact kaizen events, root cause investigations (RCA), and the implementation of corrective/preventive actions (CAPA).
• Develop and maintain comprehensive documentation including process flow diagrams, SOPs, work instructions, and training guides to ensure consistency and compliance.
• Optimize production line layouts, material flow, and takt time using Lean methodologies to increase efficiency and reduce waste.
• Own and drive continuous improvement of key performance indicators (KPIs) such as yield, cycle time, scrap rate, and OEE (Overall Equipment Effectiveness).
• Lead capital project initiatives including equipment selection, procurement, commissioning, and validation (IQ/OQ/PQ).
• Ensure all processes and equipment meet applicable safety, quality, and regulatory standards (e.g., ISO, UL, OSHA, FDA as applicable).
• Champion cost reduction strategies through design for manufacturability (DFM), value engineering, and process automation.
  
  Qualifications:
• Bachelor’s degree in Mechanical, Industrial, or Manufacturing Engineering; Master’s degree or advanced technical certifications (e.g., Lean Six Sigma Black Belt) strongly preferred.
• 7–10+ years of progressive experience in a manufacturing engineering role, ideally within high-volume or complex electromechanical production environments.
• Proven expertise in Lean Manufacturing, Six Sigma, Standard Work, process mapping, and statistical process control (SPC).
• Proficient with CAD software, ERP systems, and manufacturing execution systems (MES); experience with digital manufacturing tools and data analytics is a plus.
• Demonstrated hands-on experience with automation systems, robotics, PLCs, machine vision, or other Industry 4.0 technologies.
• Strong leadership, communication, and project management skills, with a track record of cross-functional collaboration and mentoring junior engineers.
• Demonstrated career ambition with a track record of growth and increasing responsibility; highly promotable with the potential to take on broader leadership roles within a fast-paced, high-growth organization
• Strategic thinker with a continuous improvement mindset and a passion for driving operational excellence.

PURPOSE OF POSITION:

The purpose of the Continuous Improvement Engineer, IEM360 role is to provide high-impact support role responsible for deploying and sustaining our enterprise-wide operating system across functions and sites. Modeled on world-class systems such as the Danaher Business System and Crane Business System, IEM360 is IEM’s framework for driving continuous improvement, lean enterprise transformation, and strategic execution. The IEM360 CI Engineer partners with functional and plant leaders to drive measurable improvements in Safety, Quality, Delivery, Cost, and Growth.

SUPERVISORY RESPONSIBILITIES:

• This position has no direct supervisory responsibilities.
• The position requires collaboration with other roles to drive measurable improvements in Safety, Quality, Delivery, Cost, and Growth.

ESSENTIAL FUNCTIONS:

• Lead IEM360 Deployment: Drive the implementation of IEM Business System tools and processes across operations, supply chain, engineering, and commercial functions, ensuring alignment with strategic objectives.
• Kaizen Facilitation: Plan, lead, and coach cross-functional kaizen events focused on lean fundamentals, standard work, visual management, flow, problem-solving, and strategic growth/capacity initiatives.
• Capability Building: Develop internal capability by training and coaching team members and leaders at all levels in lean thinking, daily management, and continuous improvement practices.
• Business System Maturity: Assess business system maturity across plants and functions; create and execute improvement roadmaps using tools such as maturity models, Hoshin Kanri, tiered daily management, and KPI dashboards.
• Change Leadership: Act as a catalyst for cultural transformation, enabling teams to embrace standardization, accountability, and data-driven decision-making.
• Performance Management: Partner with site leadership to embed IEM360 into key processes such as policy deployment (Hoshin), S&OP, new product introduction, and operational reviews.
• Best Practice Sharing: Identify, document, and disseminate internal best practices. Benchmark against external best-in-class organizations and adapt appropriately for IEM.

COMPETENCIES:

• Proven ability to work independently, take initiative, and manage responsibilities with minimal supervision.
• Hands-on leader and coach; thrives on the shop floor and in frontline engagement.
• High emotional intelligence with the ability to influence without authority.
• Comfortable navigating ambiguity and building structure in evolving organizations.
• Results-driven, with a bias for action and accountability.
• Excellent verbal and written communication skills
• Strong analytical and problem-solving abilities
• Excellent interpersonal and customer service skills.
• Excellent organizational and time management skills and attention to detail.
• Proficient in Microsoft Office Suite or related software

EDUCATION AND EXPERIENCE:

• Bachelor’s degree in engineering, Business, Operations, or a related field; MBA or Master’s preferred.
• 3-5 years of experience in manufacturing, operations, or continuous improvement, preferably in a multi-site or matrixed industrial environment.
• Deep understanding of Lean principles (e.g., 5S, value stream mapping, standard work, visual management, PDCA, SMED, A3 problem-solving).
• Demonstrated success leading cross-functional kaizen events and system-wide CI initiatives.
• Understanding of basic ops finance, including P&L impact, cost drivers, and fixed vs. variable costs
• Strong facilitation, project management, and communication skills.
• Experience working in or with a formal business system (e.g., DBS, CBS, strongly preferred)
• Exceptional communication and interpersonal skills with the ability to influence stakeholders at all levels.

PHYSICAL/MENTAL/ENVIRONMENTAL:

Willingness to travel (~25%) across IEM’s manufacturing locations.

Physical Demands: Activities: Sitting – 60% Walking/Standing – 40%

Lifting: Must be able to lift up to 20lbs.

Vision: Long periods of close work on a computer screen.

Mental Demands: Interpret, analyze, research and handle multiple tasks simultaneously.

Environment: Climate controlled office and non-climate-controlled production floor.

Position Summary:

IEM is currently seeking a Manufacturing Engineer for our Jacksonville, FL location and will report into the Senior Manager of Manufacturing Engineering. We are seeking a hands-on and detail-oriented Manufacturing Engineer with experience working in a medium to high-mix volume manufacturing environment. This role is responsible for driving process improvements, implementing standard work, and leading continuous improvement initiatives using structured problem-solving and Kaizen methodologies. The ideal candidate thrives in a fast-paced, team-oriented setting and has a passion for lean manufacturing and operational excellence.

Key Responsibilities:            

• Design, optimize, and implement manufacturing processes to improve quality, efficiency, and safety.
• Lead and participate in Kaizen events, root cause problem solving (8D, A3, DMAIC), and continuous improvement projects.
• Develop and maintain standard work instructions for production processes.
• Use data-driven analysis (SPC, Pareto, time studies) to identify and resolve process bottlenecks or defects.
• Collaborate with cross-functional teams including Quality, Operations, and Supply Chain to introduce new products and process changes.
• Support equipment selection, process validation, and layout optimization for lean flow.
• Lead PFMEA, control plans, and risk assessments for manufacturing processes.
• Ensure processes comply with quality, safety, and environmental standards.
• Train and mentor operators and technicians on process changes and lean tools.

Qualifications:

• Bachelor's degree in Mechanical, Industrial, or Manufacturing Engineering (or related technical field).
• 3–7 years of experience in a manufacturing or process engineering role. Proven experience with Kaizen, standard work, time studies, line balancing, material flow, and structured problem-solving tools (A3, 5-Why, Fishbone, PDCA, etc.).
• Strong working knowledge of Lean Manufacturing and/or Six Sigma principles.
• Experience with ERP/MES systems, engineering change control, and work instruction platforms.
• Demonstrated career ambition with a track record of growth and increasing responsibility; highly promotable with the potential to take on broader leadership roles within a fast-paced, high-growth organization
• Proficient in Microsoft Office and engineering tools such as AutoCAD, SolidWorks, or equivalent.
• Strong interpersonal, facilitation, and communication skills.

Preferred Qualifications:

• Lean/Six Sigma certification (Green Belt or higher).
• Experience in electrical equipment, assembly-based, or industrial manufacturing environments.
• Familiarity with ISO 9001 or related quality management systems.

IEM is currently seeking a Manufacturing Engineer – Metal Fabrication (E2) to support the commissioning, implementation, and optimization of metal fabrication manufacturing processes within our rapidly expanding switchgear operations. This intermediate-level role involves independent execution of equipment launches, training development, and process optimization activities.

Please note: This position requires 100% onsite presence in our Jacksonville sites and does not offer remote work. 

KEY RESPONSIBILITIES

• Support installation, commissioning, and validation of metal fabrication equipment (CNC punching, press brakes, welding, powder coating, wire processing, and busbar equipment)
• Coordinate with equipment vendors during setup, FAT/SAT, and production ramp-up
• Assist with manufacturing cell layout, material flow, and facility readiness
• Support operator and maintenance training during equipment launch
• Develop, evaluate, and improve manufacturing methods, utilizing knowledge of product design, materials and parts, fabrication processes, tooling and production equipment capabilities, and quality control standards
• Apply lean manufacturing principles to improve safety, ergonomics, and process stability
• Implement and maintain OEE systems to track and improve machine efficiency
• Analyze incidents and quality issues, define and implement corrective actions
• Participate in automation initiatives by employing robotic manufacturing, material handling, and inspection.
• Implement preventative maintenance programs to reduce machine down times.
• Develop standard work, SOPs, and training materials for operators and technicians
• Collaborate with operations, quality, supply chain, facilities, and EHS teams
• Occasional travel to vendors or other IEM facilities as required

QUALIFICATIONS

Required:

• Bachelor’s degree in mechanical, manufacturing, or industrial engineering, or related technical field
• Must have knowledge of CNC machines, metal forming, fabrication processes, and their requirements.
• Minimum 3-year experience in a related manufacturing environment.
• Experience in 3D CAD/CAM Software (Solidworks preferred)
• Competency in GD&T required
• Strong communication skills and ability to work in an on-site production environment
• Excellent problem-solving skills and analytical thinking ability

Preferred:

• Exposure to equipment commissioning or production ramp-up
• Familiarity with Lean manufacturing tools (OEE, SPC, etc.)
• Experience working with CNC equipment OEMs such as Amada or similar
• Ability to manage multiple projects and assignments with high level of autonomy and accountability for results
• Knowledge of machinery design

At IEM, we’re not just growing – we're thriving! Our rapid expansion means new opportunities are always on the horizon. If you’re someone who gets excited by making an impact through interesting challenges, you’ll feel right at home. IEM is currently seeking a Senior Continuous Improvement Engineer for our Jacksonville, FL locations and will report into our Continuous Improvement Manager. Join our transformation journey as a lean professional supporting kaizen activities, standard work documentation, and data-driven process improvement. This is a hands-on role ideal for candidates with a passion for lean manufacturing and a desire to grow in a structured CI environment. 

Please note: This position requires 100% in-office presence in our Jacksonville offices and does not offer remote work. 

Key Responsibilities:  

• Plan & lead cross-functional kaizen events focused on lean fundamentals, standard work, visual management, flow, problem-solving and strategic growth/ capacity initiatives
• Drive the implementation of tools and processes across operations, supply chain, engineering, and commercial functions 
• Develop internal capability by training and coaching team members/ leaders in lean thinking, daily management and continuous improvement practice
• Create and execute improvement roadmaps based on assessments of the business system maturity  
• Enable teams to embrace standardization, accountability, and data-driven decision making
• Identify, document and disseminate internal best practices 
• Will be expected to perform additional duties as assigned

 Qualifications:  

• Bachelor’s degree in Engineering, Business, Operations, or a related field; MBA or Master’s preferred
• 7–10+ years of progressive experience in a manufacturing, operations, or continuous improvement, preferably in a multi-site or matrixed industrial environment
• Proven understanding of Lean Principles (e.g., 5S, value stream mapping, standard work, visual management, PDCA, SMED, A3 problem solving)
• Demonstrated success leading cross-functional kaizen events and system-wide CI initiatives
• Proven understanding of basic ops finance, including P&L impact, cost drivers, and fixed vs. variable costs
• Strong leadership, communication, and project management skills, with a track record of cross-functional collaboration and mentoring junior engineers
• Demonstrated career ambition with a track record of growth and increasing responsibility; highly promotable with the potential to take on broader leadership roles within a fast-paced, high-growth organization 

Compensation actually offered for this role will take into account internal equity and also may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered. 

We are seeking a Manufacturing Engineer - Early Career (E1) to support the commissioning, implementation, and optimization of metal fabrication manufacturing processes within our switchgear operations. This entry-level role focuses on supporting equipment commissioning, training, and early-stage process development under guidance from senior engineers.

Please note: This position requires 100% onsite presence in our Jacksonville sites and does not offer remote work. 

KEY RESPONSIBILITIES

• Support installation, commissioning, and validation of metal fabrication equipment (CNC punching, press brakes, welding, powder coating, wire processing, and busbar equipment)
• Coordinate with equipment vendors during setup, FAT/SAT, and production ramp-up
• Assist with manufacturing cell layout, material flow, and facility readiness
• Develop standard work, SOPs, and training materials for operators and technicians
• Support operator and maintenance training during equipment launch
• Analyze production data to identify opportunities for efficiency, quality, and throughput improvements
• Apply Lean manufacturing principles to improve safety, ergonomics, and process stability
• Collaborate with Operations, Quality, Supply Chain, Facilities, and EHS teams
• Support future equipment procurement, expansion, and optimization initiatives
• Occasional travel to vendors or other IEM facilities as required

QUALIFICATIONS

Required:

• Bachelor’s degree in mechanical, manufacturing, or industrial engineering, or related technical field
• Experience in a manufacturing or process engineering environment
• Experience in 3D CAD/CAM Software (Solidworks preferred)
• Strong communication skills and ability to work in an on-site production environment
• Excellent problem-solving skills and analytical thinking ability

Preferred:

• Experience with metal fabrication processes and equipment
• Exposure to equipment commissioning or production ramp-up
• Familiarity with Lean manufacturing tools

Experience working with CNC equipment OEMs such as Amada or similar

About the Team: 

Relativity Space is on a mission to better connect humanity to space and the universe beyond our planet. With decades of experience scaling world-class technology organizations like Google, CEO Eric Schmidt is guiding Relativity into its next phase: advancing Terran R toward launch and building the foundation for long-term impact. 

The Terrestrial Software team is building the foundation for an automated rocket factory and integrated launch platform. Their mission is to automate and streamline workflows across the entire lifecycle of Terran R, from raw material intake to launch operations and eventually manufacturing on Mars. Today, that means partnering directly with teams across design, materials, manufacturing, and test and launch to design, implement, and deploy end user enterprise-wide applications, industrial automation, data analytics infrastructure, and next-generation AI to solve real problems and accelerate progress. Long term, the team is laying the groundwork for a modular, scalable software platform that can power highly autonomous operations on Earth and beyond. This is a team for builders and thinkers who thrive on cross-functional impact and want to shape the digital backbone of our future in space.

About the Role:

On the Automation and Control Engineering (ACE) team, you will design, build, and operate the software that connects our automated factory, test facilities, and launch systems. ACE is responsible for the full stack—from the central platform down to the device-level software running on controllers and equipment—and your work will directly shape how Terran R is built, tested, and flown.

• * Own features end-to-end across the software development lifecycle: from problem framing and architecture through implementation, test, deployment, and operation
• Build and maintain the platform services (real-time data pipelines, orchestration, UI, alerting), automation tooling and languages, and device-level software used by teams across the company to control and monitor real hardware
• Partner directly with hardware, test, manufacturing, and launch teams to design, instrument, and continuously improve automation and control systems that are safe, observable, and resilient in production environments

About You: 

• You have 7+ years of experience in systems programming (C++ or Rust) and/or programming language implementation, with strong fundamentals in compilers, interpreters, or virtual machines
• You have built or extended domain-specific languages or execution engines for hardware automation, scientific computation, trading, or other real-time domains where correctness, latency, and memory footprint matter
• You are comfortable designing fast, low-allocation code paths and reasoning about performance in terms of cache behavior, allocation patterns, and data layout
• You are excited to work on a proprietary language used for live hardware control and calculations, and to collaborate closely with users to evolve the language and runtime in a safety-critical context

Nice to haves but not required:

• Academic or industry background in compilers, static analysis, formal methods, or programming languages research
• Experience implementing type systems, bytecode interpreters, JITs, or code generation pipelines optimized for low latency and small memory footprints
• Experience building scriptable automation frameworks or configuration/DSL layers on top of C++/Rust systems used to orchestrate hardware, tests, or complex workflows
• Familiarity with real-time scheduling, concurrency models, and fault-tolerance techniques used when a language or runtime is responsible for controlling physical equipment

About the Team:

The Launch team operates at the intersection of every major aspect of Terran R, from stages and payloads to ground systems, launch, landing, and refurbishment. The Cape is the only place where you see it all come together, offering a level of exposure and responsibility unmatched elsewhere in the program. This is where first flights happen, where history is built on top of history, and where the scale of what's underway is unlike anything in modern aerospace. The mission stays the same, but the work evolves with every milestone: from first launch to reuse, high-cadence operations, and beyond. If you're looking to define what's next in space launch and write a new playbook, not just repeat what’s already been done, this is where it happens.

About the Role:

As a Senior Infrastructure Engineer, you connect various internal technical teams to define architectural, structural, heavy civil, electrical, mechanical, plumbing, fire protection, & industrial requirements and will be our owner’s representative to outside facing consultants and contractors. You will work closely with other test & launch team members including infrastructure, fluids, electrical, command & control, mechanical, and support Test Operations during test processing and operations.

You will be responsible for managing the development, design, and construction of new infrastructure projects and will be responsible for the development of construction drawings, request for proposals, competitive bidding, bid evaluations, sub-contractor selections, sub-contractor management, and construction management. You will plan and execute the work to install and operate best-in-class test site solutions to meet stringent cost and schedule requirements in a very competitive environment.

About You:

As a member of the Infrastructure team at Relativity, you will be at the forefront of creating world class launch sites. You enjoy working with teams and are able to work autonomously to ensure project completion. You have a strong background in field engineering, construction engineering, and project management, and you have a passion for taking ideas and designs and making them become a reality in the built environment. You are a learner and doer at heart, who continuously engages across technical and operations teams to achieve amazing outcomes. You are willing to travel up 25% to support ongoing design, construction, testing, and operations across Relativity’s sites

• Bachelor’s degree in civil engineering, structural engineering, or related technical discipline
• 5 years of experience working in the aerospace or construction industry with a mix of hands-on field experience and project management experience
• Experience with design documentation, construction drawings, construction bid solicitation, contractor selection, construction management, field supervision, permitting, QA/QC, and Safety
• Experience with project scoping, budgeting, scheduling from both a day-to-day perspective as well as overall construction management
• Experience with Architectural, Structural, Civil, and MEPF design, construction, and operation
• Understanding of standard construction procedures, best practices, means & methods
• Ability to work within 3D models utilizing NX, AutoCAD or similar CAD programs
• Ability to travel up to 50%

Nice to haves but not required:

• Experience with development, permitting, land use controls, conditional use permits, and working with local government agencies
• Demonstrated customer service excellence and ability to communicate highly effectively in verbal/written form with internal and external customers
• Must have strong interpersonal skills and ability to work in a team environment
• Experience with direct responsibility driving projects forward while managing and reporting progress to remote management
• High organizational skills in managing multiple projects simultaneously
• Ability to design and understand precision technical plans, blueprints, drawings and modeling applications
• Ability to perform and manage technically complex projects using independent judgment and personal initiative
• Recognize and act on opportunities; maintain flexibility to adjust as requirements and priorities shift or constraints change and anticipate them when possible
• Ability to work in dynamic environments to execute real-time tasks in tight operation windows
• Licensed Professional Engineer (P.E.)
• Advanced degree or training in engineering, construction, operations, or project management
• Experience with facilities and systems within the aerospace industry
• Experience designing, building, or operating test or launch GSE within the aerospace industry
• Experience with FEM structural analysis
• Familiar with aerospace planning, procedures and operations, and safety (including LOTO)
• Experience working with state and federal government agencies

Successful candidates must clear a background check administered by the US government to obtain clearance for on-site work at our government partner location in Cape Canaveral, Florida.

About the Team:

The Launch team operates at the intersection of every major aspect of Terran R, from stages and payloads to ground systems, launch, landing, and refurbishment. The Cape is the only place where you see it all come together, offering a level of exposure and responsibility unmatched elsewhere in the program. This is where first flights happen, where history is built on top of history, and where the scale of what's underway is unlike anything in modern aerospace. The mission stays the same, but the work evolves with every milestone: from first launch to reuse, high-cadence operations, and beyond. If you're looking to define what's next in space launch and write a new playbook, not just repeat what’s already been done, this is where it happens.

About the Role:

• Lead electrical project design and construction activities for launch and processing facilities
• Work on electrical systems across voltages ranging from 22.5 kV to 120 V
• Support power generation and control, power distribution and protection, fault recovery, and sequencing operations for the launch of Relativity Space vehicles
• Develop construction drawings, requests for proposals, bid packages, bid evaluations, subcontractor selection, and subcontractor management
• Design electrical systems and provide design requirements for other disciplines, including work in hazardous environments
• Collaborate with management on the development of future Relativity Space Facilities

About You:

• Bachelor’s degree in Electrical Engineering or a related field with 6+ years of experience in increasingly advanced roles
• Professional experience in the aerospace or construction industry working with electrical systems, including a combination of analysis/design, field implementation, project management, and project execution
• Experience applying electrical engineering principles to projects in industrial or infrastructure environments
• Ability to work effectively with multidisciplinary teams and manage multiple priorities
• Experience designing electrical systems for commercial/industrial facilities

Nice to haves but not required:

• Experience working with DoD, USAF/USSF, and/or NASA standards
• Prior experience in aerospace (orbital launch vehicle) facilities maintenance and construction

Successful candidates must clear a background check administered by the US government to obtain clearance for on-site work at our government partner location in Cape Canaveral, Florida.

About the Team: 

Relativity Space is on a mission to better connect humanity to space and the universe beyond our planet. With decades of experience scaling world-class technology organizations like Google, CEO Eric Schmidt is guiding Relativity into its next phase: advancing Terran R toward launch and building the foundation for long-term impact. 

The Terrestrial Software team is building the foundation for an automated rocket factory and integrated launch platform. Their mission is to automate and streamline workflows across the entire lifecycle of Terran R, from raw material intake to launch operations and eventually manufacturing on Mars. Today, that means partnering directly with teams across design, materials, manufacturing, and test and launch to design, implement, and deploy end user enterprise-wide applications, industrial automation, data analytics infrastructure, and next-generation AI to solve real problems and accelerate progress. Long term, the team is laying the groundwork for a modular, scalable software platform that can power highly autonomous operations on Earth and beyond. This is a team for builders and thinkers who thrive on cross-functional impact and want to shape the digital backbone of our future in space.

About the Role:

Designs and maintains the controller processes that run on safety-critical hardware, focusing on fast, deterministic binaries, memory-based IPC, and integration with field and TCP-based protocols.

About You: 

• You have 6+ years of experience building C++ or Rust software that runs on or near safety-critical hardware, with a strong focus on correctness and reliability
• You have deep understanding of memory management and inter-process communication (IPC), and you are comfortable designing and debugging high-performance binaries that pass data efficiently between processes
• You have hands-on experience with real-time or near-real-time execution, and you care about low jitter, latency, and throughput, using common tools to track down performance and memory bottlenecks
• You are comfortable integrating with industrial communication protocols (e.g., CAN, LXI, Modbus, RMC/DMCP, OpenDAQ or similar), including moving data reliably over TCP between controllers and higher-level systems

Nice to haves but not required:

• Experience designing and operating systems running on a real-time OS or environments with tight real-time constraints
• Experience with lock-free or low-contention concurrency patterns for high-throughput data exchange between processes
• Familiarity with time-sensitive networking, deterministic scheduling, or other techniques used to coordinate multiple controllers in a safety-critical environment
• Prior experience bringing up or debugging hardware-in-the-loop test setups for controllers, including working directly in lab environments with instruments and test equipment

Work Arrangement

This is an onsite position in Tampa, FL, Huntsville , or Northern, VA.

Job Overview

The Electrical Engineer 2 will support designing, developing, and maintaining electrical systems and components across multiple R&D efforts and production lines. This key player will combine technical expertise and problem-solving skills to design, implement, and maintain a broad range of electrical systems in various domains including embedded systems (simulation, schematic capture, PCB layout, firmware development), power electronics, radio frequency (RF) devices and antennas, battery and associated management systems.

Essential Functions

• Design, develop and test electrical systems and equipment for military, industrial, commercial, and consumer use related to Unmanned Systems (UAVs, UGVs, USVs) of various types.
• Support the development and maintenance of electrical system documentation including wiring diagrams and schematics through an organized release process utilizing modern distributed version control technologies such as GIT.
• Assist with the design, test, and review new and existing PCB designs.
• Analyze and interpret technical data, such as specifications, blueprints, and schematics, to ensure compliance with applicable codes and regulations. Familiarity with military standards related to reliability and safety is preferred.
• Collaborate with other engineers, technicians, and clients to identify and resolve technical issues and improve system performance.
• Support the installation, operation, maintenance, and repair of electrical systems and equipment.
• Troubleshoot electrical problems and provide technical support to production staff as needed
• Develop and implement automated programming and testing apparatuses to aid in production and quality assurance of circuit boards and subassemblies.
• Support rapid prototyping, system bring-up, and hardware-in-the-loop (HIL) testing
• Contribute to internal R&D efforts and aid in the transition of these efforts into production
• Perform other duties as assigned.

Standard Essential Functions

• Regular and reliable attendance on a full time basis [or in accordance with posted schedule].
• Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices.
• Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications            

• Knowledge of electrical design software for schematic capture and PCB layout (Altium (Preferred), Eagle PCB, Autodesk Fusion360, KICAD, etc...)
• Knowledge of electrical simulation tools such as LTspice
• Knowledge of Radio Frequency (RF) simulation tools such as ANSYS HFSS or CST Microwave Studio is beneficial.
• Limited MCAD skills with Autodesk Fusion360 and/or SolidWorks are beneficial.
• Knowledge of common industry protocols (LVDS, I2C, HDMI, UART, SPI, CAN, USB, MIPI)
• Familiarity with battery-powered Unmanned Aerial Vehicles (UAVs) and associated avionics and electronics such as IMUs, AHRS, BLDC motors, etc...
• Knowledge of embedded processors such as ARM, and basic embedded programming skills therein with C/C++
• Knowledge of test and debug abilities with common lab equipment including DMMs, Oscilloscopes, Spectrum Analyzers, Vector Network Analyzers, Logic Analyzers, etc...
• Strong soldering skills required
• Strong problem-solving and analytical skills
• Ability to work independently and as part of a team
• Excellent verbal and written communication skills

Education / Certifications

• Bachelor's degree in electrical engineering or a related field
• Professional certification, such as Professional Engineer (PE), is preferred but not required.

Experience

• 3+ years of electrical engineering experience.

Physical Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is:

• Frequently required to sit, and to reach to use computers and other office equipment
• Frequently required repetitive movements of wrists, hands, and/or fingers
• Occasionally required to stand for extended periods of time

For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time.

Security Clearance

• Ability to obtain/maintain a Top Secret DoD clearance, U.S. Citizenship required.

Work Arrangement

This is an onsite position in Tampa, FL, Huntsville , or Northern, VA.

Job Overview

The Senior Electrical Engineer position plays a crucial role in designing, developing, and maintaining electrical systems, components, and leading larger projects. As a Senior Level position, ownership of larger projects and leadership of teams will be expected. This key player will combine technical expertise, leadership, and problem-solving skills to design, implement, and maintain electrical systems such as vehicle avionics, battery and power subsystems, radio communication systems, navigation, and computer vision systems, etc.

Essential Functions

• Design, develop and test electrical systems and equipment for military, industrial, commercial, and consumer use related to Unmanned Systems (UAVs, UGVs, USVs) of various types.
• Oversee the selection of components and equipment based on analysis of specifications and reliability and determines design approaches and parameters.
• Collaborate with avionics, embedded systems (microcontrollers, FPGAs, Single Board Computers etc…), and Radio Frequency (RF) links. Supports Flight Test operations, as needed.
• Develop and maintain electrical control systems, including wiring diagrams and schematics.
• Lead design reviews, integration events, and flight test readiness activities
• Analyze and interpret technical data, such as specifications, blueprints, and schematics, to ensure compliance with applicable codes and regulations. Familiarity with military standards related to reliability and safety.
• Collaborate with and lead teams of other engineers, technicians, and clients to identify and resolve technical issues and improve system performance.
• Plan and oversee the installation, operation, maintenance, and repair of electrical systems and equipment.
• Troubleshoot electrical problems and provide technical support to production staff as needed.
• Lead internal R&D efforts, and aid in the transition of these efforts into production
• Develop and implement quality control processes to ensure product reliability and performance.
• Lead rapid prototyping, system bring-up, and hardware-in-the-loop (HIL) testing
• Lead customer funded efforts, and aid in the transition of these efforts into production.
• Perform other duties as assigned.

Standard Essential Functions

• Regular and reliable attendance on a full time basis [or in accordance with posted schedule].
• Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices.
• Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications

• Extensive knowledge of common industry protocols (LVDS, I2C, HDMI, UART, SPI, CAN, USB, MIPI)
• Extremely knowledgeable in circuit design with knowledge of embedded microcontrollers, video image processing, battery technology, motor controllers, and power distribution.
• Strong knowledge of electrical design software for schematic capture and PCB layout (Altium (Preferred), Eagle PCB, Autodesk Fusion360, KICAD, etc...)
• Strong knowledge of electrical simulation tools such as LTspice
• Knowledge of Radio Frequency (RF) simulation tools such as ANSYS HFSS or CST Microwave Studio is beneficial.
• Strong MCAD skills with Autodesk Fusion360 and/or SolidWorks are beneficial.
• Familiarity with gas and battery-powered Unmanned Aerial Vehicles (UAVs) and associated avionics and electronics such as IMUs, AHRS, BLDC motors, etc...
• Strong knowledge of embedded processors such as ARM, and embedded programming skills therein with C/C++
• Test and Debug abilities with common lab equipment including DMMs, Oscilloscopes, Spectrum Analyzers, Vector Network Analyzers, Logic Analyzers, etc...
• Ability to work independently and as part of a team
• Good leadership skills including managing a team through software such as Jira
• Ability to problem solve at a high level and carry out a vision by leading a team into appropriate technical solutions
• Excellent verbal and written communication skills

Education / Certifications

• Bachelor's degree in electrical engineering or a related field
• Master's degree in an applicable electrical engineering or related field is preferred

Experience

• 9+ years of electrical enineering experience

Physical Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is:

• Frequently required to sit, and to reach to use computers and other office equipment
• Frequently required repetitive movements of wrists, hands, and/or fingers
• Occasionally required to stand for extended periods of time

For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time.

Security Clearance

• Ability to obtain/maintain a Top Secret DoD clearance, U.S. Citizenship required.

Work Arrangement

This is an onsite position in Tampa, FL, Huntsville , or Northern, VA.

Job Overview

The Electrical Engineer 3 position plays a crucial role in designing, developing, and maintaining electrical systems, components, and leading larger projects. As a more experienced contributor, ownership of larger tasks and leadership of team members will be expected. This key player will combine technical expertise, mentorship, and problem-solving skills to design, implement, and maintain electrical systems such as vehicle avionics, battery and power subsystems, radio communication systems, navigation, and computer vision systems, etc. as well as design PCB's and review PCB's from schematic

Essential Functions

• Design, develop and test electrical systems and equipment for military, industrial, commercial, and consumer use related to Unmanned Systems (UAVs, UGVs, USVs) of various types.
• Design, test, and review new and existing PCB designs.
• Support flight test events.
• Selection of components and equipment based on analysis of specifications and reliability and determines design approaches and parameters.
• Works with avionics, embedded systems (microcontrollers, FPGAs, Single Board Computers etc…), and Radio Frequency (RF) links. Supports Flight Test operations, demonstrations and exercises as needed.
• Develop and maintain electrical control systems, including wiring diagrams and schematics.
• Analyze and interpret technical data, such as specifications, blueprints, and schematics, to ensure compliance with applicable codes and regulations. Familiarity with military standards related to reliability and safety.
• Collaborate with teams of other engineers, technicians, and clients to identify and resolve technical issues and improve system performance.
• Plan and oversee the installation, operation, maintenance, and repair of electrical systems and equipment.
• Troubleshoot electrical problems and provide technical support to production staff as needed.
• Support customer funded efforts, and aid in the transition of these efforts into production.
• Support rapid prototyping, system bring-up, and hardware-in-the-loop (HIL) testing
• Implement quality control processes to ensure product reliability and performance.
• Perform other duties as assigned.

Standard Essential Functions

• Regular and reliable attendance on a full time basis [or in accordance with posted schedule].
• Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices.
• Embodies AEVEX’s cultural values and aligns daily actions with department goals and company culture.

Qualifications            

• Strong knowledge of common industry protocols (LVDS, I2C, HDMI, UART, SPI, CAN, USB, MIPI)
• Proficient in circuit design with knowledge of embedded microcontrollers, video image processing, battery technology, motor controllers, and power distribution.
• Strong ECAD skills applying knowledge of electrical design software for schematic capture and PCB layout (Altium (Preferred), Eagle PCB, Autodesk Fusion360, KICAD, etc...) required
• Strong Knowledge of the following:
  • Electrical simulation tools such as LTspice
  • Radio Frequency (RF) simulation tools such as ANSYS HFSS or CST Microwave Studio
  • MCAD with Autodesk Fusion360 and/or SolidWorks
  • Embedded processors such as ARM, and embedded programming skills therein with C/C++
• Familiarity with gas and battery-powered Unmanned Aerial Vehicles (UAVs) and associated avionics and electronics such as IMUs, AHRS, BLDC motors, etc...
• Excellent Test and Debug abilities with common lab equipment including DMMs, Oscilloscopes, Spectrum Analyzers, Vector Network Analyzers, Logic Analyzers, etc...
• Ability to work independently and as part of a team.
• Good leadership skills including managing a team through software such as Jira or Confluence.
• Ability to problem solve at a high level with little technical guidance from leadership.
• Excellent verbal and written communication skills
• Comfortable working in a lab environment assembling and testing equipment

Education / Certifications

• Bachelor's degree in electrical engineering or a related field
• Master's degree in an applicable electrical engineering or related field is preferred

Experience

• 6+ years of electrical engineering experience.

Physical Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is:

• Frequently required to sit, and to reach to use computers and other office equipment
• Occasionally required repetitive movements of wrists, hands, and/or fingers
• Occasionally required to stand for extended periods of time

For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time.

Security Clearance

• Ability to obtain/maintain a Top Secret DoD clearance, U.S. Citizenship required.

About Otto Aerospace
Otto Aerospace is building the next generation of business aircraft. Flight tests of our technology demonstrator validate dramatic reduction in fuel burn and allow a sizeable improvement in cabin comfort. Leveraging a combination of laminar flow aerodynamics and carbon-fiber materials, Otto Aerospace is designing world-class aircraft that take advantage of first principles physics and deliver ground-breaking performance.

About the Role 

Otto Aerospace is seeking a dynamic senior designer to contribute to the design, development, and integration of the cockpit and cabin interiors. You will join a team developing the world’s most efficient aircraft. Otto Aerospace is seeking first principles designers that balance creativity with experience while working within an effective team atmosphere.

What You’ll Do

• Vendor & Program Coordination
  • Lead technical coordination with interior suppliers for cabin, seating, and selected equipment from concept through certification and delivery.
  • Serve as the primary technical point of contact for interior vendors, ensuring alignment with program requirements, schedules, and certification objectives.
  • Coordinate with cross-functional teams (structures, electrical, ECS, certification, manufacturing, and supply chain) to define and validate all mechanical and electrical interfaces.
• Interface Definition & Integration
  • Develop and maintain Zonal Reference Models (ZRM), Interface Control Models (ICM), and Interface Control Drawings (ICD) to clearly define interfaces with adjacent structures and systems.
  • Coordinate design and integration activities with furnishings, seating, and equipment suppliers to ensure robust system integration within the airframe.
  • Perform tolerance stack-up analyses at component, assembly, and installation levels.
• Interior Design & Technical Ownership (ATA 25)
  • Design, develop, and detail cockpit and cabin furnishings, equipment, and components in compliance with technical, performance, and regulatory requirements.
  • Perform trade studies to optimize fit, form, function, weight, cost, and manufacturability.
  • Design composite, machined, and sheet metal components.
• 3D CAD & Digital Definition
  • Act as the primary CAD technical expert for cabin interiors.
  • Create and manage experimental and production-level digital product definitions, including parts, assemblies, and installations, fully defining dimensions, materials, processes, and tolerances.
  • Develop detailed system layouts and airframe integration studies using CATIA 3DEXPERIENCE (3DX).
• Certification & Compliance Support
  • Support the creation, review, and update of certification, safety, and quality documentation, including FTA, PSSA, SFHA, ACP, and related compliance artifacts.
  • Ensure interior designs meet applicable Part 23 and ATA 25 regulatory and safety requirements.
• Innovation, R&D & Technology Development
  • Collaborate with the Industrial Design team to assess feasibility of high-level concepts prior to transfer to supplier engineering teams.
  • Identify, source, and coordinate the development of new technologies supporting cabin interiors (e.g., mechanisms, lighting, switches, sensors, materials).
  • Participate in the definition and build-up of internal mockups to validate concepts and populate an internal innovation database.
  • Actively contribute to technology scouting and benchmarking to ensure cabin concepts reflect future market expectations.
• User Experience & Stakeholder Collaboration
  • Support cabin user experience and human factors studies.
  • Work with pilots and human-factors specialists on crew and passenger interface layout and usability.
  • Collaborate with marketing and sales teams to meet customer experience and branding targets.
  • Coordinate with maintenance and operations teams to ensure reliability, accessibility, and maintainability targets are met.
• Leadership & Mentorship
  • Provide technical oversight and mentorship to junior engineers and designers.
  • Promote best practices in CATIA modeling, interface control, certification awareness, and supplier coordination.
• Other duties as assigned

Who You Are

Education

• B.S., in Mechanical or Aerospace Engineering, or equivalent.

Experience

• Strong knowledge of interior furnishings and equipment common in modern Part 23 / Part 25 business aircraft.
• 7+ years of industry experience or in a closely related field.
• Experience with fabrication methods of metallic and composite components and systems.
• Experience with ASME Y14.100 Drawings and Y14.5 GD&T.
• Experience with model and drawing checking, engineering part and model release, and engineering change process.
• Experience in composite and metallic rapid prototyping (additive manufacturing) for both experimental and production applications.
• Minimum of 1,000 hours utilizing CATIA V5, V6, or 3DX (3DX preferred).
• Familiarity of FAR Part 23 certification requirements and processes pertinent to cockpit and cabin systems.
• Strong knowledge of industry standards and hands-on experience.

Interpersonal Skills

• Active Listening: Practice to gain insight and truly understand all project stakeholders.
• Critical Thinking: Make prompt, informed and value-based decisions for the project.
• Organization: Focus on agenda, schedules, frameworks, and methodologies, as well as communicating tasks, updates, progress, and blockers.
• Problem Solving: Assess issues from different vantage points and formulate the best solution in addressing specific challenges.
• Self-Motivation: Exude the highest level of commitment and motivation to see it through from start to finish.
• Teamwork and Team Building: Establish a collaborative culture where people with unique personalities and skills happily work together and accountable to shared goal.
• Strong Business Communication: Use the right language, tone and storytelling techniques when communicating, describing, or explaining issues over email, chat, reports, presentations and other forms and channels of communication.

Where You’ll Be  

**This role is remote at first with 25% travel to our headquarters in Ft Worth, TX, then will be onsite at our new manufacturing site in Jacksonville, FL upon facility readiness

Benefits 

Otto Aerospace provides a robust benefits package that includes competitive salaries, subsidized medical, dental, and vision coverage, 401(k) opportunities, paid short-term disability, voluntary long-term disability and additional term life, with 15 paid days off, 13-14 paid holidays, and paid sick leave. Depending on seniority and role, some roles qualify for potential bonuses and stock options.

Otto Aerospace is an Equal Opportunity Employer  

We are committed to diversity, equity, and inclusion in every aspect of our hiring process. All applicants will be considered for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability. We believe that a diverse team brings fresh perspectives, innovative ideas, and greater success. The more inclusive we are, the stronger we become. Applicants must be legally authorized to work in the U.S. 

#LI-Remote