Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

This role reports to the Director, Operations Engineering and will be responsible for developing and progressing the Ready for Operations (RFO) activities, ensuring seamless transition of the facility from EPC to the operations phase.

The successful candidate shall possess in-depth understanding on drivers such as turbines (gas & steam) and motors, and driven equipment such as generators, compressors and pumps. The incumbent shall also be familiar with associated supporting components/systems such as, couplings, bearings, lubrication and sealing systems (dry gas seals and mechanical seals). Working knowledge in compressor performance and vibration analysis is key in successful performance of this job.

Additionally, this individual shall provide, as a minimum, intermediate level Reliability Engineering support to the Operations team with focus in the following areas:

• Root Cause Failure Analysis (RCFA): With expertise in relevant techniques to adequately lead RCFA exercises for failures relating to plant equipment and/or processes.
• Reliability Centered Maintenance (RCM): With adequate knowledge in relevant techniques to drive fine-tuning & improvements in existing Maintenance practices to achieve a cost-effective, yet safe robust Maintenance strategy.

The incumbent is also expected to provide guidance and mentorship to less experienced staff associated with maintaining and operating plant equipment, to ensure the highest level of asset availability.

Responsibilities:

• Will provide advice and guidance on Rotating Equipment system engineering issues.
• Provide daily-to-day Rotating Equipment and Mechanical systems support to the Maintenance & Operations teams to ensure continued operability of plant equipment.
  • Providing advanced diagnostic support, to allow rapid production recovery, in the event of equipment failure and forced plant outage.
  • Provide Root Cause Failure Analysis (RCFA) leadership during RCFA exercises.
    • This include the ability to wrap up summaries (with causes and recommendations) and present to concerned parties.
  • Provide interpretation and evaluation services to analysis and recommendations from the Reliability Technicians on predictive programs.
  • Provide support to the Maintenance team for Turnaround planning and execution.
  • Supports availability tracking and improving the overall reliability for plant equipment and Responsible for evaluating the workflow process, identification of critical spares, spare parts storage and preservation requirements for Rotating Equipment systems throughout the plant.
  • Reliability Centered Maintenance (RCM): Lead initiatives to drive fine-tuning & improvements in existing Maintenance practices to achieve a cost-effective. 

Qualifications:

• Education and Certifications: 
  • Minimum Bachelor’s degree in Engineering or other relevant technical discipline is required
  • Mechanical Engineering focus is preferred. 
  • A Professional Engineering License is preferred.

• Experience: 
  • A minimum of Fifteen (15) years’ experience working in an engineering capacity, with Rotating and Mechanical equipment in an industrial setting in engineering or operations
  • Oil and Gas experience is required, with preference in LNG applications, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable.
    • Extensive knowledge of gas turbines (Frames & Aero-derivatives) and compressors (including compressor performance) is required 

• Additional Skills:
  • Knowledge of CMMS Systems
  • RCFA tools for conducting failure analysis

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking an Associate/Graduate Reliability & Integrity Engineer to join our team in the Calcasieu Pass Facility in Louisiana.

This incumbent will report to the Principal Reliability & Integrity Engineer and will be supporting Operations, Maintenance and Engineering groups for matters relating to the plant asset integrity program.

This role will be part of the team responsible administering the plant asset integrity management program, ensuring plant operations remain program compliant and with safe, reliable and cost effective. 

The successful candidate shall be a technical generalist, preferably with good working knowledge of gas processing plant equipment such as general machinery, piping, pressure vessels, heat exchangers, storage tanks, instrumentations and safety equipment.

The incumbent shall also be knowledgeable of industry associated specifications, codes and standards (API, ASME, NACE, ANSI & ISO) and have good understanding of Condition Monitoring & Risk-Based management concepts.

 Job Role Responsibilities:

Candidate will develop knowledge and understanding of the Venture Global Asset Integrity Management program and will be assigned tasks, including but not limited to:  

• Fixed equipment mechanical integrity initiatives:
• Management of API inspections and follow-up activities
• Support Risk Based Inspection (RBI) activities
•  
• Rotating equipment reliability improvement initiatives:
• Review and continuous improvement of Preventive & Predictive Maintenance equipment routines
• Support efforts for transition to Reliability Centered Maintenance
• Support development of “bad actor” list 
• Develop competency for engineering software tools and databases utilized for asset integrity initiatives (e.g. PCMS, FFS analysis, vibration analysis)
• Stay current with technology developments regarding equipment integrity management
• Support additional integrity initiatives as needed (e.g. pipelines, marine facility)
• Support with the Management of Change (MOC) process
• Support Process Hazard Analysis (PHA) risk assessments
• Support Root Cause Failure Analysis (RCFA) process
• Support development and tracking of appropriate Key Performance Indicators
• Provide day-to-day troubleshooting support to Operations Groups

Education, Experience and Qualifications:

• Bachelor’s degree in Engineering discipline (e.g. Chemical, Mechanical, Metallurgy, Welding).
• Familiarity with Microsoft Office 365 Application Suite
• Familiarity with ASME, API and NACE/AMPP recommended practices

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of CP1 LNG (CP1) Regulatory Compliance Manager. This position will be located at the CP1 LNG Facility.

General Description:

The CP2 Regulatory Compliance Manager is responsible for development, implementation, and maintenance of the CP2 LNG Regulatory Compliance Program to ensure strategies, procedures and assurance processes are established for addressing Federal, State, and Local regulatory requirements. The CP2 Regulatory Compliance Manager must understand the regulatory aspects of the LNG Facility regarding security, safety, training, maintenance and operations in accordance with 49 CFR Part 193 and NFPA 59A as well as be knowledgeable in 33 CFR 127. This position will report to the Director of Regulatory Compliance.

Responsibilities:

• Development, implementation, and maintaining the CP2 Regulatory Compliance Program
• Serve as the subject matter expert in Regulatory areas concerning LNG Operations; Specifically, for PHMSA, FERC, and USCG requirements.
• Leads the regulatory compliance assurance program necessary for Federal, State, and Local audits.
• Performs internal compliance assurance activities in coordination with applicable stakeholders in preparation of routine Federal, State, and Local audits or inspections
• Support and participate in Federal, State, and Local Regulatory Agency site audits and inspections.
• Reviews external state and federal agency audit findings and provides recommendations to internal procedures and/or compliance manuals.
• Identify potential areas of compliance vulnerability or risks and provides reports to Supervisor and other LNG business stakeholders.
• Conduct inspections and audits of CPLNG Operations and Maintenance activities and lead in implementation of any necessary corrective actions identified.
• Lead in evaluation of Federal Register updates and facilitating the updating of processes, procedures and training to maintain compliance.
• Work with Operations SME’s to address areas of improvement identified from field assessments and/or changes to CPLNG processes and procedures.
• Lead in supporting the development and implementation of CP2 internal regulatory inspection and audit program.
• Maintains working knowledge of regulatory requirements, company procedures and documents to satisfy those requirements.
• Assists with communicating and implementing improvements to programs and documentation to ensure compliance with regulations
• Lead in development and implementation of CP2 Regulatory Training program.
• Support engineering design reviews of Implementation Plans (IP’s), IA Question sets, and Data Requests from various Regulators for compliance validation of Company Permits and Applicable Laws.  
• Lead in safety related incident management issues on behalf of the Regulatory Department.
• Support the MOC reviews for compliance validation.
• Responsible for executing external regulatory reporting obligations.
• Lead CP2 Operations procedure reviews and ensuring procedure updates are maintained in accordance with applicable law.
• Analyze Compliance data mining to determine necessary training or program modifications required for Compliance Management.
• Support the Company’s functional groups in planning, process and control management.
• Cooperates with LNG Operations personnel, engineering and other stakeholders to share lessons learned, experiences, and knowledge to ensure safe, reliable, and efficient operations.

Qualifications:

• Education and Certifications: Bachelor’s degree from an accredited university is preferred.  Associates degree or equivalent experience is acceptable.
• 5 years in Regulatory management or similar industry. A minimum of 2 years of experience in LNG.
• Must be proficient in LNG Facility Regulations including, but not limited to, 49 CFR 193, 33 CFR 127, NFPA 59A, and ASME B31.3.
• Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing status.
• Extensive experience managing regulatory dialogue in the US and working closely with US regulatory agencies, especially FERC and PHMSA.
• Corporate or consulting experience in designing and implementing compliance programs preferred.

Skills:

• Experience in PHMSA, FERC, and USCG rules and regulations is required.
• Excellent research, written and oral communication skills
• Proficient data analytics capabilities
• Strong logistics, time management, planning and scheduling skills required
• An acute sensitivity to safety issues in a hazardous environment.
• Effective communicator at all levels of an organization with individuals and groups from different disciplines, industries and governmental agencies.
• Have advanced computer experience with Word, Excel, Access, and PowerPoint. Experience In Adobe Captivate, Articulate 360, or equivalent e-learning design software preferred.
• Ability to interface and effectively communicate with different groups, including operations staff, maintenance staff, engineering departments, human resources, regulators and other Company work groups.
• Ability to multi-task and function in a highly dynamic atmosphere.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Scaffold & Insulation Manager, to be based in Cameron, LA:

Position Overview:

The Scaffold & Insulation Manager will provide strategic leadership and managerial oversight to project activities and is responsible for achieving safe, cost effective, timely and contractually compliant project results. The role will also require effective communication to Project and Executive Management for timely decision making and incorporation of stake holder input. This new position will be based at our project site in Cameron, LA.

Key Responsibilities and Essential Duties:

• Lead a Safe work culture.
• Maintain comprehensive records of documentation for erected and dismantled scaffold quantities.
• Monitor EPC Contractor and Subcontractor craft labor levels
• Analyze worker or production problems
• Report on project status, performance, constraints and issues to Project Management
• Other responsibilities as assigned.

Job Qualifications

• 10+ years of relevant managerial experience in major Oil & Gas Engineering and Construction projects.
• Experience with LNG Liqeufaction or Combined Cycle Power Generation projects preferred.
• Ability to perform multiple tasks and work within project deadlines, and adjust as priority changes occur.
• Exhibit excellent written and oral communication skills.
• Excellent attention to detail and ability to efficiently summarize and prioritize information.
• Ability to work nights and weekends as required.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Senior Production Engineer, Liquefaction to join our Integrated Production Excellence team. This position will be located in Cameron, LA with frequent travel to Arlington, Virginia.

This role will be responsible for optimizing the Availability and Performance of the Calcasieu Pass 2 (CP2) Facility LNG Liquefaction Trains and support the overall CP Facility Production System Optimization efforts.

Responsibilities:

• Set CP Facility LNG Trains Production daily targets, define operating limits and engage with Operations, Maintenance and Engineering to develop the Production Plan for the day. 
• Build and maintain Real time, online, surveillance and monitoring models to optimize the Availability and Performance of the CP Facility LNG Liquefaction Trains 
• Perform Analysis to detect deviations from Live Operating Envelope Limits and identify the actions required to safely and reliably maximize LNG rundown.
• Identify short-, medium- and long-term Availability and Reliability improvement initiatives to maximize LNG rundown using insights from Real time System and Physics-based/data-driven models. 
• Identify Production risks that could impact Availability and Reliability and develop mitigation plans to address them
• Provide input to the weekly and monthly Production reviews and follow up on any actions required to improve the performance of the CP Facility LNG Trains
• Identify the CP Facility LNG Trains production loss events and engage with the relevant stakeholders (including but not limited to Engineering, Maintenance, Operations) to review, validate, report and manage production losses in a timely manner to maximize Availability and Reliability
• Lead or be part of EIRs (Engineering Investigation Requests) and MoCs (Management of Change) required to improve the CP Facility LNG Trains performance.
• Lead or be part of the CP Facility LNG Trains Production loss RCAs when required.
• Gather the required assumptions on LNG Trains performance and provide timely input to the Forecast and Annual Delivery Plan process.
• Support the Long-Term Service Agreement (LTSA) process and provide all the required input and analysis as required 
• Support the development of Integrated Production Excellence standards and procedures.
• Capture Lessons Learned from the CP Facility and provide input to other Venture Global LNG projects / sites as required

Qualifications:

• Bachelor’s degree in Chemical/Process or related Engineering degree required
• Minimum 5 years’ experience working as an Engineer, preferably in Production Engineering   
• Experience in pre-treatment required
• Experience supporting commissioning activities
• Oil and Gas experience is required, with strong preference in LNG, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable.  
• Travel to Arlington, VA as needed

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Senior Production Engineer, Liquefaction to join our Integrated Production Excellence team. This position will be located in Cameron, LA with frequent travel to Arlington, Virginia.

This role will be responsible for optimizing the Availability and Performance of the Calcasieu Pass 2 (CP2) Facility LNG Liquefaction Trains and support the overall CP Facility Production System Optimization efforts.

Responsibilities:

• Set CP Facility LNG Trains Production daily targets, define operating limits and engage with Operations, Maintenance and Engineering to develop the Production Plan for the day. 
• Build and maintain Real time, online, surveillance and monitoring models to optimize the Availability and Performance of the CP Facility LNG Liquefaction Trains 
• Perform Analysis to detect deviations from Live Operating Envelope Limits and identify the actions required to safely and reliably maximize LNG rundown.
• Identify short-, medium- and long-term Availability and Reliability improvement initiatives to maximize LNG rundown using insights from Real time System and Physics-based/data-driven models. 
• Identify Production risks that could impact Availability and Reliability and develop mitigation plans to address them
• Provide input to the weekly and monthly Production reviews and follow up on any actions required to improve the performance of the CP Facility LNG Trains
• Identify the CP Facility LNG Trains production loss events and engage with the relevant stakeholders (including but not limited to Engineering, Maintenance, Operations) to review, validate, report and manage production losses in a timely manner to maximize Availability and Reliability
• Lead or be part of EIRs (Engineering Investigation Requests) and MoCs (Management of Change) required to improve the CP Facility LNG Trains performance.
• Lead or be part of the CP Facility LNG Trains Production loss RCAs when required.
• Gather the required assumptions on LNG Trains performance and provide timely input to the Forecast and Annual Delivery Plan process.
• Support the Long-Term Service Agreement (LTSA) process and provide all the required input and analysis as required 
• Support the development of Integrated Production Excellence standards and procedures.
• Capture Lessons Learned from the CP Facility and provide input to other Venture Global LNG projects / sites as required

Qualifications:

• Bachelor’s degree in Chemical/Process or related Engineering degree required
• Minimum 5 years’ experience working as an Engineer, preferably within the LNG industry.
• Experience in pre-treatment required
• Experience supporting commissioning activities
• Oil and Gas experience is required, with strong preference in LNG, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable
• Travel to Arlington, VA as needed

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

As we grow in the Louisiana market, we are looking for a dynamic professional who will help us to identify, support, and develop our greatest resource, our people. This person will oversee our growing team in Cameron, LA as it relates to talent acquisition, compliance, employee relations and performance management. The ideal candidate will have experience building teams in a high growth industrial environment with a focus on helping leaders to not just fill jobs, enforce policies and administer benefits, but write compelling job descriptions that highlight our employment brand, create innovative staffing solutions in a lean environment, and develop policies that support our culture and mission. The right person will challenge conventional HR thinking in service of finding unique solutions. 

Responsibilities:

• Serve as the primary HR point of contact for the Calcasieu Pass 2 facility.
• Coach and guide leadership and employees on employee relations matters, performance and policies.
• Advise on matters related to compliance and employment law.
• Manage employee onboarding and off-boarding.
• Responsible for HR and benefits administration ensuring that new and current team members understand, have access to, and take advantage of our offerings.
• Protect our people and organization by supporting the creation of accessible HR policies and procedures that are compliant with federal and local laws and enhance VG’s culture.

Qualifications:

• Bachelor’s degree in Human Resources, Business Administration, or equivalent experience
•  7–10 years of progressive HR experience, preferably in energy, LNG, manufacturing, or industrial environments required. 
• Minimum of 3 years of experience managing or supervising a small HR team.
• Prior experience supporting a site-based or operations workforce strongly preferred.
• Demonstrated experience leading performance management cycles and workforce progression initiatives.
• SHRM-CP, SHRM-SCP, PHR, or SPHR preferred but not required.
• Workday experience preferred

Skills & Competencies

• Strong knowledge of employment law and HR best practices.
• Experience in a safety-sensitive, highly regulated environment.
• Strong leadership and team development capabilities.
• Strong facilitation and coaching skills.
• Ability to influence and partner with operational leaders.
• Strong analytical and organizational capabilities.
• High level of discretion and professionalism.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Human Resources Generalist to support multiple sites, while based in Cameron, Louisiana.

General Description:

This position reports to the Human Resources Director, with a dotted‑line reporting relationship to the HR Manager at the Plaquemines facility, and provides administrative support to the Human Resources department. The HR Generalist assists with the day-to-day operations of HR functions and duties, ensuring accuracy, confidentiality, and timeliness in all HR processes.

Responsibilities:

• Manage the administrative onboarding process for all new hires, including entering candidate data from recruiting into relevant HR systems, coordinating pre-employment drug testing and physicals, send pre-employment instruction emails, and issuing first-day communications once screenings are cleared.
• Oversee laptop requests and schedule first-day safety orientations for contractors to ensure smooth onboarding and compliance with site safety protocols.
• Verify vacation allotments for non-exempt employees to ensure alignment with offer details and maintain accurate records within onboarding systems.
• Coordination of annual physicals - maintain scheduling, communication, and compliance tracking.
• Assist with administering quarterly random drug testing process – includes coordination with third-party vendors, maintaining schedules based on work shifts, and monitoring completion to ensure compliance.
• Assist with organizing and facilitating first-day orientation activities for employees, including issuance of location based badges, internal notifications, and cross-departmental coordination to ensure readiness for new hire arrival.
• Other duties as assigned

Qualifications:

• Proactive, organized, and detail-oriented. You can manage several concurrent projects at once, keeping track of the details involved with each and ensuring that nothing falls through the cracks.
• Collaborative and service-oriented. You greet everyone you encounter with a collaborative spirit, kindness, and empathy. You maintain strong relationships and remain responsive to each team member’s unique needs.
• Growth-oriented. You are always seeking to better yourself and your work, and you will push yourself to the peak of performance to help fulfill our mission. In service of that growth, you welcome and delight in feedback from supervisors, employees and colleagues.
• Nimble, creative problem solver. Although careful planning and execution define your work, you are positive and graceful when unexpected challenges arise. You are not scared of the challenge of balancing the need for global, unifying systems with the individual needs of our diverse team.
• Strong communication skills. In addition to your ability to articulate your thoughts clearly and concisely to many different audiences both in writing and verbally, you understand the power of words and have the unique gift of coaching others on how to appropriately express themselves.
• Technology-minded. You are familiar with modern ATS and HRIS products and are constantly thinking about how to simplify processes with technical solutions.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

The Materials Coordinator is a key member of the site warehouse organization responsible for coordinating the receipt, storage, tracking, movement, and issuance of materials supporting construction, maintenance, and operations activities. This role ensures materials are properly documented, preserved, stored safely, and made available to the right teams at the right time. This is a contract position located in Cameron, LA. 

The position partners closely with Procurement, Planning, Warehouse, Engineering, Construction, Operations, and Maintenance to maintain inventory accuracy, support material availability, and ensure disciplined execution of warehouse and inventory processes within SAP and related systems.

Core Responsibilities:

• Coordinate the receipt, inspection, documentation, and storage of inbound materials, equipment, and spare parts.
• Verify quantities, descriptions, and specifications against purchase orders, packing lists, and bills of lading.
• Ensure materials are properly identified, labeled, tagged, and transacted accurately in SAP or other warehouse systems.
• Support loading, unloading, staging, transfer, and delivery of materials to warehouse, yard, maintenance, construction, and operations teams.
• Maintain accurate inventory records for receipts, issues, transfers, returns, adjustments, and material consumption.
• Assist with cycle counts, physical inventory activities, and reconciliation of discrepancies.
• Maintain accurate documentation for material transactions including receiving reports and inspection records.
• Support picking, expediting, and tracking of critical materials required for maintenance and operational work execution.
• Organize warehouse and yard storage locations to promote good housekeeping and efficient workflow.
• Support preservation requirements for long‑lead, sensitive, or critical equipment and materials.
• Ensure compliance with site safety requirements and proper material handling practices.
• Identify and support continuous improvement opportunities in warehouse operations and inventory accuracy.

Qualifications

• High school diploma or GED required.
• Safe and clean driving record.
• Associate degree, military logistics background, or technical training in supply chain, warehouse operations, or related field preferred.
• Minimum 3 years of experience in materials coordination, warehouse operations, or inventory control.
• Minimum 3 years of experience operating lifting equipment and / or driving under DOT restrictions.
• Experience in industrial, energy, petrochemical, manufacturing, logistics, or LNG environments preferred.
• Working knowledge of warehouse management practices including receiving, transfers, issuing, and cycle counting.
• Experience with SAP inventory or warehouse management modules or similar ERP systems preferred.
• Strong attention to detail, organization skills, and system discipline.
• Strong teamwork and communication skills with ability to coordinate across functions.
• Demonstrated commitment to safety, accountability, and continuous improvement.
• Ability to work in warehouse, yard, and industrial plant environments.
• Must report to office daily and be able to support 24/7 operations with occasional nights and weekend work as required.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. 

We are seeking an experienced Subcontracts Administrator who is familiar with engineering, procurement and construction contracts and large infrastructure and/or energy projects, to administer and enforce construction contracts associated with the Company’s LNG projects.  Subcontract Administrator will support the administration of all phases of the project subcontracts, including preparation of subcontracts plan, bidders’ pre-qualification, subcontracts formation, risk assessment, execution, change management, reporting and formal close-out.   This individual will support the Subcontracts Manger and participate in a multi-disciplinary team that provides contracts oversight, implementation, and support and, as necessary, assist members of other departments in relation to such matters.

The Subcontract Administrator will report to the Manager of Subcontracts and support the Project Team as necessary. This position will be located in Cameron, LA.

Key Responsibilities:

• Working as part of the Project Team in developing and forming subcontracts.
• Administering all phases of construction subcontracts, including pre-qualification, formation, execution and close-out.
• Developing and maintaining project subcontract plans.
• Sourcing potential subcontractors and performing bidders’ qualification in collaboration with HSE and QA/QC teams.
• Ensuring proper technical inputs needed for the award of subcontracts are timely received from proposals and project technical teams, avoiding to the extent possible any post-award changes.
• Developing and issuing RFQs, adding value to the scope of work, technical documents, and project schedule.
• Soliciting and ensuring proper review of RFQ package documents for completeness prior to issue.
• Receiving and analyzing proposals, support the Subcontract Manager negotiating the terms of the subcontracts with the support of the project and legal teams.
• Obtaining NDAs from bidders/subcontractors, as required.
• Conducting and documenting subcontracts pre-award and project kick-off meetings.
• Preparing, with the collaboration of the Project Team, the Subcontract Bid Assessment & Recommendation for award to be reviewed and approved by management.
• Support Subcontract execution following Company’s Guidelines and Procedures.
• Tracking and auditing subcontract document list working in conjunction with the Document Control Team.
• Reviewing and analyzing quantity assessment provided by Project Controls for invoice validation and subcontract productivity.
• Ensuring all required subcontractor insurance is in place prior to the performance of any work.
• Attending Site construction meetings, as required.
• Support the Overall Change Order management process, by working closely with the relevant Project Stakeholders to finalize change order documentation.
• Monitoring and reviewing invoices from subcontractors.
• Obtaining Lien releases and completion certificates from subcontractors.

Highest Level of Education Required for this Position:

• Bachelor’s degree in Engineering, Law, Business or related field is preferred.

Job Qualifications:

• Minimum 4 years of professional experience with contract / subcontracts.
• Minimum 3 years of professional experience in engineering / construction subcontracting activities for the oil and gas industry.
• Willingness to travel
• Willingness to work on Project Site, in Louisiana
• Knowledge of contract agreements, legal requirements involved in contracts, compensation methods, invoicing and change order processes required.
• Able to effectively communicate across various disciplines and with contract counterparties. 
• Excellent analytical and problem-solving skills, with an ability to spot issues and risks and escalate when appropriate.
• Excellent writing skills, including drafting of simple legal documents.
• Ability to prioritize and meet critical deadlines.
• Attention to detail and ability to manage commercially sensitive and confidential information.
• Ability to work independently as well as with team members and take direction in a fast-paced and dynamic environment.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

This role shall report to the Venture Global LNG HSSE Director. This position will be tasked with establishing and maintaining a “Boots on the ground” mentality to ensure that Health & Safety fundamentals are being utilized in the field. It will also serve as the immediate contact person in the field for all Health & Safety related questions, concerns or activities.

This is a contract position located in Cameron, Louisiana.

Essential Duties & Responsibilities:

• Ensure that Venture Global and contractor safety policies and procedures are followed
• Establish and maintain themselves as the focal point in the field for all Venture Global Health & Safety related questions, concerns, activities and/or needs.
• Engage workers in the field that are performing tasks unsafely and mentor them in the correct measures or practices to ensure that they are working with a safety-first mentality. Utilize a mentoring or educational approach when interacting with all personnel
• Stop all unsafe conditions, hazards, and/or scenes when possible
• Conduct daily safety inspections, observations, and audits to ensure all unsafe acts and conditions are immediately addressed
• Perform facility audits, observations, surveys, and inspections to identify environmental, safety, and occupational hazards and weaknesses to promote effective practices and ensure compliance and develop recommendations that provide solutions, remedies, or process improvement
• Inform HSSE leadership about the results of safety inspections, observations, and audits as well as any observed deficiencies and means of mitigation
• Ensure the reporting of all accidents, incidents, or events immediately to Onsite Project Manager and Health and Safety Director
• Participate in incident investigations to guide the identification of root causes and effective corrective actions
• Assist and support Emergency Response and Hurricane Response processes for the site
• Participate as a member of the Site Safety Committee and leadership walks
• Other duties as assigned

Qualifications:

• H.S. Education or Equivalent required. Degree and/or certification in Health & Safety Sciences or related field strongly preferred
• Strong leadership skills demonstrated by five (5) or more years in a Health & Safety Technician role
• A minimum of five (5) years’ experience working in Health and Safety Technician or Specialist position having previous LNG, Petrochemical or Oil and Gas manufacturing industry a plus
• Completion of OSHA general industry (CFR 29-1910) and/or construction (CFR29-1926)
• Occupational Health and Safety knowledge , experience, or education related to job site hazard recognition safety inspection/audits for permit to work, hazardous energy isolation, hot-work (metal welding-grinding-thermal cutting), confined space entry, elevated work/fall protection, housekeeping, and crane hoisting and rigging
• Experience in Health and Safety policies, procedures, and standards in Industrial operations, natural gas operations, or liquefaction facilities, and/or an equivalent combination of education and experience
• Any of the following certifications (not required but a plus): OSHA 500, OSHA 510, CSP, CHST, LSP, OHST, ASP Preferred CPR, First Aid, and AED certification
• Eligible to work in the US, pass a drug test and background check with criminal history
• Ability to communicate and interact effectively in verbal and written formats
• Must be able to work off shifts and overtime

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Senior Laboratory Technician to join our team at the CP2 LNG Facility in Cameron, LA. Successful candidate may be required to train at any of the other Venture Global facilities for a duration of 3-6 months.

This role reports to the Laboratory Supervisor and will be responsible for ensuring the smooth operation of the lab within the existing procedures and applications. The role must also be able to advise, assist, and audit established procedures, assist with instrument and equipment commissioning, make recommendations, and assist in troubleshooting equipment, and instruments. The role also entails training of lab technicians following existing procedures on sampling, testing, analysis, reporting and chemicals management.

The incumbent will be responsible for conducting the analysis of samples for a typical LNG plant, analysis of which shall include, but not necessarily be limited to:

• Natural Gas Composition, and impurities testing.
• LNG composition (Before & after treatment)
• Refrigerant composition
• Dewpoint (Natural Gas & other gases)
• Utility Water (produced, waste, cooling)
• Testing of other plant utilities
• Amine solution
• Environmental Waste Streams
• Natural Gas Liquids (NGL, condensate)
• Oil (condition - viscosity, particles, ferrographic)
• Coordinate third party analysis as needed
• Cargo Certificates of Analysis
• Coordinating sampling & testing of external samples

The incumbent shall also be highly familiar with sampling procedures and associated laboratory equipment to perform analysis of the above components. The candidate should have experience with oil & gas industry standards (ISO, GPA, ASTM, UOP etc.) and their applicability within the LNG industry.

Responsibilities:

• Collect samples as required including but not limited to: Vaporized LNG, High Pressure feed gasses, mixed phase liquids, Refrigerants, Amine, Demineralized Water, and other utility samples.
• Login and receive samples to test and analyze the above-mentioned components, record lab results, and generate summary reports
• Discuss out of specification results with operations and engineering for approvals
• Operate laboratory equipment to perform required analysis, trouble shoot equipment difficulties and initiate minor repairs
• Coordinate repairs, preventative maintenance on all laboratory application (scheduled & non-scheduled)
• Inventory management of laboratory supplies and parts
• Execute daily laboratory tasks and requests in a timely manner with high degree of accuracy and efficiency
• Maintain a maintenance and calibration program to ensure all analytical equipment are in top condition
• Collaborate with other laboratory technicians, and supervision on activities
• Maintain lab equipment readiness by performing daily Quality Control Standards (QCs) and keeping detailed records of all QC data in compliance with the Quality Management System (QMS)

Qualifications:

• Education and Certifications: Bachelor of Science in Biology, Chemistry, or related field (preferred), with at least four (4) years of relevant laboratory experience. 
• Experience can be substituted for education, (with preference given for recent LNG experience). 
• Oil and Gas experience is required, with preference in LNG applications, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable.
• Extensive knowledge of sampling and laboratory equipment is required, including troubleshooting
• Analytical skills in quality testing using gas chromatography, ion chromatography, and colorimetric methods.
• Mechanically inclined to troubleshoot common problems that may occur in an industrial laboratory setting including locating gas leaks, injection issues, or repairing damaged sample cylinders as needed.
• Exceptional communication skills with the ability to translate technical data to different audiences from different disciplines, industries, or government agencies
• The ability to work independently and as a team
• Proficient with MS Office Suite

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Operations Projects, Projects Lead

Location: Venture Global Calcasieu Pass (CLNG) facility in Cameron, Louisiana

General Description: 

The Operations Projects, Projects Lead reports to the Shutdown Turnaround Outage (STO) Director and is responsible for managing the Execution Resources required to complete Operations Project work at Venture Global Plaquemines Liquefied Natural Gas (PLNG) facility. The Operations Projects, Lead is responsible for the oversight of all traditional Owner-side Construction Management functions; Directing all Brown-field contracts executed under a self-directed model (Scaffold, Insulation, heavy lift, single discipline Specialty Works, Vendor site support), and providing Owner field administration for all General Contracts. Focal points for the position will be:

• An incident free environment, wherever Project works are carried out
• An open and supportive culture in the field, encouraging input, collaboration, and intervention.
•  Contractor compliance with all Facility, Design, and Regulatory Specifications and Standards 
• Efficient Contractor performance relative to cost and schedule
• Establishment and ownership of field communication workflows such as RFI, FWI, NCR, FCN, etc. which predominantly involve Contractors
• Ownership of effectiveness of field communication workflows involving Facility Operations such as MOC, Permit Processes, PSSRs etc.
• Clarity of technical communications to and from field contractors

Responsibilities: 

• Manages Operations Project work execution according to Venture Global HSSE process and procedures, to prevent or mitigate exposures to unsafe work conditions or SIMOPS.
• Manages Operations Project work execution according to VGIMS (Venture Global Integrity Management System), VGLNG Work Management and STO Management process and procedures.
• Responsible in meeting VG STO Gate process deliverables under his area of responsibility.
• Assures field communication of all conditions inherent to Management of Change within the operating facility.
• Oversees contractor participation in the evolution of all execution schedules
• Provides Subject Matter Expertise in the evolution of Construction schedule Logic, Test Plans and Site Safety Programs
• Provides expert level contractor support for all special permit requirements (such as Line Breaks, Ground Breaks, Confined Space Entries, Critical Lifts, Critical System Defeats, Leading Edge/Work at Heights, and Positive entry control, etc.) which are very common in Turnarounds
• Assures communication of all contactor ITPs, test notifications, and dossiers
• Supervises coordination of daily schedule change and progress meetings, specifically assuring availability of essential stakeholders
• Expedites the close out of field RFI and NCR
• Expedites Contractor inputs to budget impacts caused by field change
• Oversees Operations Project scope of work workshops under his area of responsibility.
• Strictly adherence to VGLNG Business controls, assuring approved contracts/suppliers execute the field work represented in their contract.
• Participates in contractor selection process
• Participates in Contractor scope and schedule reviews
• Endorses Contractor Timesheets
• Continually audits Contractor field progress
• Maintain a continuous awareness of ongoing contractor activities on all project work fronts.
• Conducts multiple daily field surveys at all active work fronts
• Regularly attends ‘Toolbox Talks’, offering expert input
• Serves as “conflict resolution” interface between Contractors, Third parties and VG.
• Communicates all field generated risk to Safety, Quality, Schedule and Cost
• Act as SME for continuous improvement/Lesson learned regarding field performance.

Qualifications 

• Minimum a high school diploma or GED. Technical degree, Mechanical Trade or PMP certification – or similar is a plus.

Experience 

• Minimum 10 (10+) years’ work experience in Construction Management (as Superintendent, Manager or Lead) in Oil and Gas, LNG or petrochemical facilities.  
• Knowledge and experience in the different aspects of Greenfield Safety, Scheduling and communications. 
• Experience using Microsoft Office Suite.
• Knowledgeable in SAP Plant Maintenance as “End User” level.
• Project Management PMP training or certification is a plus.
• Familiar with Primavera Project Management P6, MS Project experience is a plus.
• Experience in commissioning, startup, and maintenance of Oil & Gas or petrochemical facilities is preferred.
• Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing 

Skills 

• Strong Leadership and Organizational skills.
• The ability to constantly provide solutions based on logic backed by extensive personal and technical experience
• Must be an extremely effective communicator
• Must relate to people and present multiple effective motivational options
• Strong safety, schedule and quality awareness
• Able to manage multiple activities with a high degree of efficiency and accuracy. 
• Exceptional problem solving and analytical skills. Able to adapt and work in a fluid work environment which expects high level of customer services, confidentiality, and ethical behavior.
• Able to apply a strong comprehension of construction strategy, logic and best practices through open two-way communication with stakeholders
• Capable to set high standards and promote continuous improvements
• Possess the personality and ability to relate to and to establish a mutually respectful relationship with management, peers and the various facility level workers who are all responsible for ensuring good operations.
• Holds personal accountability for the performance and behavior of the field team.
• Provides mentoring and coaching to junior peers and counterparts. 

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Operations Projects Coordinator, Mechanical

Location: Venture Global Calcasieu Parish Liquefied Natural Gas (CLNG) facility in Cameron, Louisiana

General Description: 

The Operations Projects Coordinator, Mechanical reports to the Shutdown Turnaround Outage (STO) Director and is responsible for managing the STO Mechanical work at Venture Global Calcasieu Pass Liquefied Natural Gas (CLNG) facility. The Operations Projects Coordinator, Mechanical  primarily coordinates and directs the safe execution of the Turnaround Mechanical works and will be required to interface and work in collaboration with Turnaround Contractors, Operations, Maintenance (Planning and Execution), Engineering, Procurement, Warranty, Project Departments among others. 

Responsibilities: 

• Manages and Coordinates Mechanical Turnaround work execution according to Venture Global HSSE process and procedures, to prevent or mitigate exposures to unsafe work conditions or SIMOPS.
• Manages and Coordinates Mechanical Turnaround work execution according to VGIMS (Venture Global Integrity Management System), VGLNG Work Management and STO Management process and procedures.
• Responsible in meeting VG STO Gate process deliverables under his area of responsibility.
• Assures compliance with and communication of all conditions inherent to Management of Change within the operating facility.
• Assists with coordination of daily schedule change and progress meetings, specifically assuring availability of essential stakeholders
• Facilitates the Turnaround scope of work workshops under his area of responsibility, ensures works are captured in SAP, STO Revisions and STO IDs.
• Serves as SME and supports Turnaround Planners for the development of execution work packs under his area of responsibility. Support the identification of risks on time, cost, scope, and provides recommendations for corrective and improvement actions.
• Work with Turnaround Scheduler for the development of schedules under his area of responsibility and supports Critical Path Method (CPM)
• Works with Turnaround Logistic Coordinator for logistics, tools, equipment certifications/mobilization as required. 
• Strict adherence to VGLNG Business controls, approved contracts/suppliers.
• Participates in Turnaround contractor selection process, once the Contractor is onboard facilitated contractor’s work scope reviews and schedules and once in Execution controls Contractor timesheets.
• Serves as “conflict resolution” interface between Contractors, Third parties and VG.
• Monitors Pre-Execution and Post turnaround work progress against established schedule baselines. Updates, coordinates and communicate progress and schedule risk changes to all active parties and including third party contractors or vendors as required.
• Act as SME for continuous improvement/Lesson learned.

Qualifications 

• Minimum a high school diploma or GED. Technical degree, Mechanical Trade or PMP certification – or similar is a plus.

Experience 

• Minimum three (3+) years’ work experience as Mechanical routine maintenance Execution Lead or Supervisor and three (3+) years as Mechanical Turnaround Coordinator in Oil and Gas, LNG or petrochemical facilities.  
• Knowledge and experience in the different cycles of Turnaround and project controls and best practices. 
• Experience using Microsoft Office Suite.
• Knowledgeable in SAP Plant Maintenance as “End User” level.
• Project Management PMP training or certification is a plus.
• Familiar with Primavera Project Management P6, MS Project experience is a plus.
• Experience in commissioning, startup, and maintenance of Oil & Gas or petrochemical facilities is preferred.
• Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing 

Skills 

• Strong Leadership and Organizational skills.
• Strong planning and scheduling skills, able to manage multiple activities with a high degree of accuracy. 
• Exceptional problem solving and analytical skills. Able to adapt and work in a fluid work environment which expects high level of customer services, confidentiality, and ethical behavior.
• Able to apply a strong comprehension of construction strategy, logic and best practices through open two-way communication with stakeholders
• Capable to set high standards and promote continuous improvements
• Possess the personality and ability to relate to and to establish a mutually respectful relationship with management, peers and the various facility level workers who are all responsible for ensuring good operations.
• Holds personal accountability for own performance and behavior.
• Provides mentoring and coaching to junior peers and counterparts. 

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. 

Location: Venture Global Plaquemines Liquefied Natural Gas (PLNG) facility in Cameron, Louisiana.

General Description: 

The Operations Project, Scheduler reports to the Shutdown Turnaround Outage (STO) Director and is responsible for managing the STO scheduling processes of work at Venture Global Calcasieu Pass Liquefied Natural Gas (CPLNG) facility. The scheduler position will require interface and work in collaboration, but not limited to, Operations, Maintenance (Planning and Execution), Engineering, Warranty, Project Departments. 

Responsibilities: 

• Strict adherence to VGLNG business controls, approved contracts/suppliers.
• Schedule STO work according to Venture Global HSSE process and procedures, to prevent or mitigate exposures to unsafe STO work conditions or SIMOPS.
• Schedule STO work according to VGIMS (Venture Global Integrity Management System), VGLNG Work Management and STO Management process and procedures.
• Develop and maintain short, medium and long term STO schedules and act as a VGLNG STO gate.
• Develop resource loaded schedules to a safe, efficient and effective capacity.
• Work with STO Planners for the development of ROM cost estimates, following AACE 18R-97 Cost estimate classification system.
• Analyze Critical Path Method (CPM) and Earned Value functionality. Produces analytical reports such as Resources Histograms, S-Curves. including analysis of deviations, variations and trends.
• Identifies STO schedule risks on time, cost, scope, and provides recommendations for corrective and improvement actions.
• Monitor progress against and establish STO schedule baselines. Updates, coordinates and communicate schedule risk, changes to all active parties and including third party contractors or vendors as required.
• Development, implementation and utilization of STO Planning & Scheduling best practices. Act as SME for continuous improvement.

 Qualifications 

• Minimum a high school diploma or GED. Technical degree, PMP certification – or similar is a plus.

Experience 

• Minimum three (3+) years' work experience as routine maintenance scheduler and three (3+) years as Turnaround Scheduler, in Oil and Gas, LNG or petrochemical facilities.  
• In-depth Primavera Project Management P6 (3+) years' experience required) is a must.
• Proficient at SAP Plant Maintenance and Prometheus as “End User” level.
• Familiar with AACE 18R-97 Cost estimate classification system.
• Strong experience level using Microsoft Office Suite.
• Knowledge and experience in the different cycles of Turnaround and project controls and best practices. 
• Project Management PMP training or certification is a plus.
• MS Project experience is a plus.
• Experience in commissioning, startup, and maintenance of Oil & Gas or petrochemical facilities is a plus.
• Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing status.

Skills 

• Strong leadership and organizational skills.
• Strong planning and scheduling skills, able to manage multiple activities with a high degree of accuracy. 
• Exceptional problem solving and analytical skills. Able to adapt and work in a fluid work environment which expects high level of customer services, confidentiality and ethical behavior.
• Capable of setting high standards and promoting continuous improvements
• Possess the personality and ability to relate to and to establish a mutually respectful relationship with management, peers and the various facility level workers who are all responsible for ensuring good operations.
• Holds personal accountability for own performance and behavior.
• Provides mentoring and coaching to junior peers and counterparts. 

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate based on race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Contract Advisor, HSSE Contractor Management to join our team at our Calcasieu Pass Facility in Louisiana. This role shall report to the Venture Global CP2 HSSE Director. This position will be tasked with establishing and maintaining a “Boots on the ground” mentality to ensure that Health & Safety fundamentals are being utilized by all contractors operating at the CP2 project. It will also serve as the quality control of all required equipment from the HSSE aspect. This position will be located in Cameron, Louisiana. 

Essential Duties & Responsibilities:

• Oversee, and insure that all contractors adhere to Venture Global’s policies and procedures while ensuring compliance with all applicable laws, standards, and requirements
• Work with onsite procurement and logistics to ensure contractors have met the required HSSE qualifications prior to arrival at the facility.
• Coordinate with Operations Procurement to ensure all contractors are compliant in IS Networld.
• Continuously inspect, observe, and audit contractors equipment and work tasks against VG established key performance indicators, defined company procedures, policies, and conditions of the working environments.
• Establish and maintain themselves as the focal point with contractors in the field for all Health & Safety related questions, concerns, activities and/or needs.
• Spend extended periods of time in the field walking throughout the assigned area(s), climb stairs/ladders as needed to elevated work areas.
• Ensure that contractors have all required equipment and that it is deployed to effectively minimize the potential for incident(s).
• Engage contractors in the field that are under performing or violating contractual agreements and ensure proper VG work owners are notified.
• Assist in compliance reviews of contractors and report any short comings to appropriate contract owners and HSSE Management.
• Monitor all contractor activities to ensure safe work techniques and compliance to Venture Global polices and procedures.
• Possess the ability to multi-task effectively.
• Enforce a zero-tolerance policy.
• Control all unsafe conditions, hazards, and/or scenes when possible.
• Conduct daily safety inspections, observations, and audits to ensure all unsafe acts and conditions are immediately addressed.
• Inform HSSE leadership about the results of safety inspections, observations, and audits as well as any observed deficiencies and means of mitigation.
• Report all accidents, incidents, or events immediately to Shift Supervision and Health and Safety Manager.
• Aid and assist in the accident and incident investigation process as needed.
• Inspect, control, and enforce effective and timely housekeeping standards.
• Participate as a member of the Site Contractor Safety Committee.
• Other duties as assigned.

Qualifications:

• H.S. Education or Equivalent required. Degree and/or certification in Health & Safety Sciences or related field strongly preferred
• Minimum of three (3) years experience with contractor health and safety management
• Experience in IS Networld or similar programming
• A minimum of five (5) years’ experience working in Health and Safety Technician or contractor supervision position having previous LNG, Petrochemical or Oil and Gas manufacturing industry a plus
• Occupational Health and Safety knowledge , experience, or education related to job site hazard recognition safety inspection/audits for permit to work, hazardous energy isolation, hot-work (metal welding-grinding-thermal cutting), confined space entry, elevated work/fall protection, housekeeping, and crane hoisting and rigging
• Experience in Health and Safety policies, procedures, and standards in Industrial operations, natural gas operations, or liquefaction facilities, and/or an equivalent combination of education and experience
• Process Safety Management (PSM) experience is a plus
• Eligible to work in the US, pass a drug test and background check with criminal history
• TWIC Required (Current owner or have the ability to obtain)
• Ability to communicate and interact effectively in verbal and written formats
• Must be able to work off shifts and overtime as required

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Analyst, Continuous Improvement located in Cameron, LA or Point Celeste, LA.

The Analyst, Continuous Improvement supports performance improvement initiatives across procurement, engineering, construction, commissioning, and operations within Venture Global’s LNG business. This role assists in applying Continuous Improvement (CI) principles, basic Root Cause Analysis (RCA), and data analysis to help improve safety, quality, reliability, and cost efficiency.

Reporting to the Senior Director of Continuous Improvement, the Analyst works closely with Quality, HSSE, Operations, and Supply Chain teams to support improvement projects, track corrective and preventive actions (CAPA), and help promote a culture of continuous improvement and operational discipline.

Key Responsibilities

Continuous Improvement Support

• Support CI projects and RCA activities focused on defect reduction, cost improvement, and operational reliability.

• Assist in the use of standardized CI and RCA tools, templates, and reporting formats.

• Track CAPA action items to ensure they are documented, assigned, and progressing toward completion.

• Support cross‑functional teams by gathering data, preparing materials, and documenting outcomes.

Data Analysis & Problem Solving

• Collect, analyze, and summarize data to identify trends related to quality, safety, cost, and performance.

• Assist senior CI team members in identifying potential root causes and improvement opportunities.

• Help document findings and support implementation of improvement actions.

Knowledge Management & Documentation

• Document RCAs, CAPAs, and improvement initiatives in accordance with CI standards.

• Maintain CI records, lessons learned, and improvement trackers.

• Support the sharing of best practices and improvement results across teams.

Culture & Capability Development

• Participate in CI training sessions and learning activities to build personal capability in Lean and problem‑solving methods.

• Support workshops and meetings by preparing materials and capturing action items.

• Promote awareness of CI tools and structured problem‑solving approaches.

 Performance Tracking & Reporting

• Assist with tracking CI metrics, KPIs, and project status updates.

• Support the preparation of dashboards, reports, and presentations for leadership review.
• Help quantify basic operational or cost impacts from CI initiatives under guidance.

Qualifications

Education

• Bachelor’s degree in engineering, Quality, Operations, Business, or a related field required.

Experience

• 0–2 years of experience in Continuous Improvement, Quality, Operations, or a related analytical role.

• Internship or co‑op experience in industrial, manufacturing, energy, or engineering environments preferred.

• Exposure to CI, Lean, or problem‑solving methodologies is a plus.

Technical Skills

• Basic knowledge of Lean principles and structured problem‑solving tools (e.g., 5‑Why, Fishbone).

• Strong analytical skills with proficiency in Excel and basic data analysis.

• Ability to document processes, findings, and action items clearly.

Personal Attributes

• Strong attention to detail and willingness to learn.

• Collaborative team player with good communication skills.

• Organized, proactive, and eager to develop CI and analytical capabilities.

• Demonstrates curiosity and a continuous learning mindset.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Operations Project Coordinator (EI&C)

Location: Venture Global Calcasieu Pass Liquefied Natural Gas (CLNG) facility in Cameron, Louisiana

General Description:

The Operations Project Coordinator (E, I&C) reports to the Shutdown Turnaround Outage (STO) Director and is responsible for managing the STO E, I&C work at Venture Global Plaquemines Liquefied Natural Gas (PLNG) facility. The Operations Project Coordinator position primarily coordinates and directs the safe execution of the Turnaround E, I&C works and will be required to interface and work in collaboration with Turnaround Contractors, Operations, Maintenance (Planning and Execution), Engineering, Warranty, Project Departments among others.

 Responsibilities:

• Manages and Coordinates E, I&C Turnaround work execution according to Venture Global HSSE process and procedures, to prevent or mitigate exposures to unsafe Turnaround work conditions or SIMOPS.
• Manages and Coordinates E, I&C Turnaround work execution according to VGIMS (Venture Global Integrity Management System), VGLNG Work Management and STO Management process and procedures.
• Responsible in meeting VG STO Gate process deliverables under his area of responsibility.
• Facilitates the Turnaround scope of work workshops under his area of responsibility, ensures works are captured in SAP, STO Revisions and STO IDs.
• Serves as SME and supports Turnaround Planners for the development of execution work packs under his area of responsibility. Support the identification of risks on time, cost, scope, and provides recommendations for corrective and improvement actions.
• Works with Turnaround Scheduler for the development of schedules under his area of responsibility and supports Critical Path Method (CPM) analysis.
• Works with Turnaround Logistic Coordinator for logistics, tools, equipment certifications/mobilization under the area of his responsibility.
• Adheres to VGLNG Business controls, approved contracts/suppliers.
• Participates in Turnaround contractor selection process. 
• Facilitates reviews of Contractor work scope and schedule inputs
• Controls Contractor timesheets.
• Manages interfaces between Contractors, third parties and VG.
• Monitors all phases of contractor work progress against established schedule baselines. 
• Communicates progress and schedule risk changes to all active parties 
• Contributes to continuous improvement/Lesson learned program.

Qualifications

• Minimum a high school diploma or GED. Technical degree, PMP certification – or similar is a plus. Electrical trade experience is an asset

Experience

• Minimum three (3+) years’ work experience as E, I&C routine maintenance Execution Lead or Supervisor and three (3+) years as E,I&C Turnaround Coordinator in Oil and Gas, LNG or petrochemical facilities.
• Strong knowledge in DCS Systems (Yokogawa is a plus), GE Mark VI and Field Instrumentation.
• Knowledge and experience in the different cycles of Turnaround and project controls and best practices. 
• Experience level using Microsoft Office Suite.
• Knowledgeable in SAP Plant Maintenance as “End User” level.
• Familiar with Primavera Project Management P6, MS Project experience is a plus.
• Experience in commissioning, startup, and maintenance of Oil & Gas or petrochemical facilities is a plus
• Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing status

Skills

• Strong Leadership and Organizational skills.
• Strong planning and scheduling skills, able to manage multiple activities with a high degree of accuracy.  
• Exceptional problem solving and analytical skills. Able to adapt and work in a fluid work environment which expects high level of customer services, confidentiality, and ethical behavior.
• Capable to set high standards and promote continuous improvements initiatives.
• Team oriented, with ability to function effectively as part of a diverse group.
• Provides mentoring and coaching to junior peers and counterparts.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate based on race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Operations Projects, Planner. The Operations Projects, Planner reports to our Operations team and is responsible for developing, maintaining and communicating projects schedules. The position can be assigned to one or multiple facilities as well as specific initiatives for business studies or process development responsibilities. This position is located in Cameron, LA.

 Responsibilities:

• Lead planning exercises, prepare, and maintain project schedules for Operations
• Ensure the appropriate level of planning and scheduling functionality is applied to support project controls activities
• Assists operations team in resolution of issues involving cost, schedule, and changes
• Establishes and maintains a standard reporting format for management reports
• Review schedules to ensure that the appropriate level of details and structure are applied and effective progress monitoring
• Ensure schedules generated for a project are fully integrated and resource-loaded in order to ensure accuracy
• Ensure compliance of industry procedures and practices
• Set up, implement, and maintain schedule related key performance indicators (KPIs)
• Obtains data on progress, logic, and manpower from operations/plant personnel
• Conduct schedule review meetings and assist in developing alternatives to accommodate changes to operational plans and communicate any deviations of current plan

Qualifications:

• Bachelor's Degree (Engineering discipline preferred) or equivalent experience in LNG project engineering and/or construction industry
• 3+ years of experience 
• Demonstrated success in proactively improving processes and systems
• Exceptional written, verbal and interpersonal communication skills
• Ability to communicate effectively at all levels of an organization and with individuals and groups from different disciplines, industries and governmental agencies.
• Organized, planning skills, able to manage multiple activities and programs in timely fashion and with a high degree of accuracy, able to meet work deadlines
• Exceptional problem solving and analytical skills 
• Computer knowledge including Microsoft Office Suite including Word, Excel, Access, Project and PowerPoint
• Specific expertise with Microsoft Project

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Technician, Laboratory to join our team at the CP2 LNG Facility that is in Cameron, Louisiana. Successful candidate may be required to train at any of the other Venture Global facilities for a duration of 3-6 months.

This role reports to the Laboratory Supervisor and will be responsible for progressing the Ready for Operations (RFO) activities, ensuring seamless transition of the facility from EPC to the operations phase. This entails assisting with commissioning activities of lab equipment and instrumentation, in validating procedures and work instructions for testing, analysis reporting and chemicals management.

The incumbent will be responsible for conducting the analysis of samples for a typical LNG plant, analysis of which shall include, but not necessarily be limited to:

• Natural Gas Composition, and impurities testing.
• LNG composition (Before and after treatment)
• Refrigerant composition
• Dewpoint (Natural Gas & other gases)
• Utility Water (produced, waste, cooling)
• Testing of other plant utilities
• Amine testing
• Environmental Waste Streams
• Cargo Certificates of Analysis

The incumbent shall also be familiar with sampling procedures and associated laboratory equipment to perform analysis of the above components.

Responsibilities:

• Operate laboratory equipment in a safe, reliable, and operationally responsible manner.
• Test and analyze the above-mentioned sample types, record lab results and generate summary reports using application software’s, and lab data repositories.
• Run daily quality control checks on applicable instrumentation following GPA, ASTM, and applicable ISO standards
• Operate laboratory equipment to perform required analysis, trouble shoot equipment difficulties and initiate minor repairs
• Basic inventory management of laboratory supplies and parts
• Execute daily laboratory tasks and requests in a timely manner with high degree of accuracy and efficiency
• Collaborate with other laboratory technicians, and supervisory staff on activities

Qualifications:

• Education and Certifications: Degree in Science, Chemistry or equivalent preferred.
• A minimum of two (2) year experience working in a hydrocarbon laboratory (May be substituted with education or relevant LNG experience)
• Oil and Gas experience is preferred, with preference in LNG applications, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable.
• Knowledge of basic laboratory equipment, including Gas Chromatograph, DewPoint meters, sample cylinders, regulators, valves, balances, etc.
• Analytical skills in quality testing using gas chromatography
• Proficient with MS Office Suite

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. 

We are seeking qualified applicants for the position of  Project Engineering Manager - MAR.  This position is based out of our Calcasieu Pass LNG 2 (CP2) facility located in Cameron, Louisiana.  

  Responsibilities: 

• Primary site interface for all MAR engineering technical alignment 
• Provides input to weekly site engineering report 
• MAR RFI Owner 
• Responsible for MAR punch list resolution 
• Validate check sheets and sign A and B ITRs as needed, working with the site coordinators 
• Review EPC engineering work packs for accuracy and content 
• Review installation / erection / precommissioning plans, documents, and requirements specific to areas. Includes review of installation manuals, communication of specific requirements, sequences, etc to coordinators 
• Inspect major arriving equipment and participate on walk downs 
• Maintain log of scope transferred to site and participate in interface meetings between EPC and OFE contractors

Qualifications: 

• Bachelor's degree in engineering.
• Professional accreditation such as a PMP or similar.
• Minimum of ten (10) years’ experience in Project Engineering/Management with at least 4 years in the LNG industry.
• Expert Knowledge of project management systems and principles with extensive knowledge of working with Engineering and Management teams to set up tools for operational readiness, performance monitoring and reporting requirements. 

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Marine Health and Safety Technician to join our team at our Calcasieu Pass Facility in Cameron, Louisiana.

This role shall report to the Venture Global LNG Marine HSSE Manager. This position will be tasked with establishing and maintaining a “Boots on the ground” mentality to ensure that Marine Health & Safety fundamentals are being utilized in the field.

This position will be in Cameron, Louisiana. 

Essential Duties & Responsibilities:

• Oversee, implement, and manage Venture Global LNG’s safety policies and procedures while ensuring compliance with all applicable laws, standards, and requirements
• Continuously inspect, observe, and audit the application of work tasks against our defined company procedures, policies, and conditions of the working environments
• Establish and maintain themselves as the focal point in the field for all Health & Safety related questions, concerns, activities and/or needs.
• Spend extended periods of time in the field walking throughout the assigned area(s), climb stairs/ladders as needed to elevated work areas
• Ensure that hazard assessments and permitting requirements are being followed
• Engage workers in the field that are performing tasks unsafely and mentor them in the correct measures or practices to ensure that they are working with a safety-first mentality. Utilize a mentoring or educational approach when interacting with all personnel
• Assist in compliance reviews, general risk assessments, and other safety assessments to support Health and Safety management of the facility
• Monitor all contractor activities to ensure safe work techniques and compliance to Venture Global LNG’s policies and procedures
• Possess the ability to multi-task effectively
• Enforce a zero-tolerance policy
• Control all unsafe conditions, hazards, and/or scenes when possible
• Conduct daily safety inspections, observations, and audits to ensure all unsafe acts and conditions are immediately addressed
• Perform facility audits, observations, surveys, and inspections to identify environmental, safety, and occupational hazards and weaknesses to promote effective practices and ensure compliance and develop recommendations that provide solutions, remedies, or process improvement
• Inform HSSE leadership about the results of safety inspections, observations, and audits as well as any observed deficiencies and means of mitigation
• Report all accidents, incidents, or events immediately to Shift Supervision and Health and Safety Manager. Aid and assist in the accident and incident investigation process as needed
• Participate in incident investigations to guide the identification of root causes and effective corrective actions
• Inspect, control, and enforce effective and timely housekeeping standards
• Participate as a member of the Site Safety Committee
• Other duties as assigned

Qualifications:

• H.S. Education or Equivalent required. Degree and/or certification in Health & Safety Sciences or related field strongly preferred
• Fully understand and have experience with Permit to Work process and systems, the expectation to audit and advise using a mentoring approach to valid discrepancies and to provide safe and effective paths of resolution
• Leadership skills with two (2) or more years as a Health & Safety Technician or Specialist position having previous LNG, Petrochemical or Oil and Gas manufacturing industry a plus
• Occupational Health and Safety knowledge, experience, or education related to job site hazard recognition safety inspection/audits for permit to work, hazardous energy isolation, hot-work (metal welding-grinding-thermal cutting), confined space entry, elevated work/fall protection, housekeeping, and crane hoisting and rigging
• Experience in Health and Safety policies, procedures, and standards in Industrial operations, natural gas operations, or liquefaction facilities, and/or an equivalent combination of education and experience
• Process Safety Management (PSM) experience is a plus
• Any of the following certifications (not required but a plus): CPR, First Aid, and AED certification
• Eligible to work in the US, pass a drug test and background check with criminal history
• TWIC Required (Current owner or have the ability to obtain)
• Ability to communicate and interact effectively in verbal and written formats
• Must be able to work off shifts and overtime

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Operations Project, Project Manager. This is a Full-time role in Cameron, LA.

General Description (includes but is not limited to the following, other duties may be assigned):

The Operations Project, Manager is responsible for planning, coordinating, executing, communicating, and closing complex, integrated Turnaround outages. This position must be familiar with work performed during outages, including, but not limited to gas turbines, pretreatment facilities, licensed liquefaction units, multiple complex projects, instrumentation and controls upgrades, complex balance of an operating facility and other designated work scopes. The Outage Manager leads a matrix team of internal and external resources to develop a logically integrated outage schedule, then supports successful completion of outage work safely, on schedule and on budget. Develops and monitors the outage schedule, communicates outage status and exceptions, tracks scope changes during the outage, also tracks and communicates outage risks. The outages managed by the Outage Manager use the Venture Global Outage Management Procedure to provide consistent planning, execution, and closure of complex integrated outages that ensure safe, operational reliability and efficiency. Provide outage leadership to both internal and external organizations and entities.

Job Responsibilities:

• In-depth and broad, extensive knowledge of outage management industry best practices.
• Highly skilled professional with wide-ranging, advanced LNG technical experience to resolve complex issues.
• Competent to work at very high level in multiple knowledge areas and functions as an advanced contributor.
• Ability to make decisions on complex issues regarding integration of project turnaround components and advanced tasks on overall outage.
• Lead the integration of internal and external resources, identifies opportunities to develop integrate processes, tools, services and techniques within the operational facility.
• Plans and leads complex integrated plant outages.
• Ability to use independent judgment requiring in-depth evaluation of variable factors including risk, safety, cost, and schedule.
• Independently selects methods, techniques, analytical approach and evaluation criteria. Determines methods and procedures for new assignments.
• Serves as project/technical lead on medium to large outage projects; regularly coordinates work of professionals, technicians and others outside of own department.
• Train and mentor employees on technical skills.
• Collaborate and solve problems – works with others to resolve significant issues, clarify or interpret complex information, provide initial screening/negotiations.
• Leads matrix organization teams

The position is a key position in the Operations Projects Group and will build, support and develop strong working relationships within the group, other corporate stakeholders, and associated construction contractors, vendors, suppliers, etc. It is an essential role in delivering operations project success and meeting expectations and requirements. Additionally, driving a strong safety culture, environmental stewardship and operational excellence, while delivering a safe and operable plant and maintaining a license to operate will underpin this leadership position.

This role will be based out of Cameron, LA with regular frequent business trips to operations facilities, project locations, contractors, vendors, suppliers, etc.

Qualifications

• Bachelor’s Degree or equivalent in business or engineering
• 10 or more years in area of specialization with in-depth experience across knowledge areas and multiple functions including LNG project outage management and plant maintenance and/or operations
• Highly skilled professional with wide-ranging, LNG advanced technical experience to resolve complex issues
• Competent to work at very high level in multiple knowledge areas and functions as an advanced contributor

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.  

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking an experienced Procurement Specialist to join us within the Procurement function in Cameron, LA. This person is responsible and accountable for the procurement of third-party goods and services for Calcasieu Pass LNG Operations.

Responsibilities:

• Independently conducts RFx and bidding processes, specifically for spare parts, minimizing risk and maximizing value in terms of quality, delivery and cost.
• Execute sourcing plans that secure supply and minimize disruptions.
• Utilize sourcing best practices to efficiently and effectively lead initiatives.
• Performs contract administration, which includes creating and modifying purchase order and contract documents; adjusting, cancelling and/or closing transactions in SAP and Coupa.
• Assist stakeholders in scope of work development.
• Effectively communicates with and maintains relationships with internal stakeholders.
• Challenges stakeholders when inefficiencies, process deviations, and strategy deviations are identified.
• Monitors supplier and contract activity and identifies areas for improved cost savings.

Qualifications:

• Bachelor’s degree in business, supply chain management, engineering or related discipline.
• Minimum of five years supply chain experience in the oil and gas industry; Experience in LNG liquefaction facilities highly preferred.
• Skills:
  • Extensive experience using SAP.
  • Self-starter with ability to work strategically under little direction.
  • Ability to build relationships and in engage with stakeholders across the organization.
  • Strong knowledge of maintenance practices and operations processes.
  • Ability to work collaboratively with other teammates and other functions.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Director, Production Engineering to join our Integrated Production Excellence Team.  This position will be located in Cameron, LA with frequent travel to Arlington, Virginia.

This role reports to the SVP, Integrated Production Excellence and will be responsible for developing or progressing an Operational Readiness schedule to transition the facility from EPC to the operations phase.

Post transition, the role will be responsible for closely working with Production/Operations, Maintenance, Commercial Operations, Gas Supply and other Engineering disciplines to ensure that the safe and sustainable realization of facility production targets are met. 

Responsibilities:

• Understands all facets of Feed Gas Allocation, and LNG/NGL production, storage, and shipping.
• Understands the principles of fluid flow, heat transfer, thermodynamics, and hydrocarbon process chemistry as applied to an operating process unit. Familiar with the hazards of hydrocarbon processes and the methods used to keep process facilities safe.  
• Review and validate forecasting and scheduling tools. Utilizing these tools, advise Production Management of limitations or deficiencies that may impact production.
• Work with the outage planning organization as a technical resource.
• Review and validate tools for monitoring and ordering catalyst and chemicals needed to manage the facility.  Maintain energy balance models.
• Develop tools to quantify facility emissions to support environmental and compliance reporting.
• Review and validate the daily Production status reports depicting all critical information and data for Production Management. This includes Inlet Feed Gas measurement and allocation, Power Consumption, LNG/NGL Production, Emissions and Waste measurements, and Efficiency monitoring.
• Develop and maintain loss accounting summaries to allow for identification or categorization of facility production losses.
• Review and validation of Production performance summaries for each process unit summarizing data on total production, capacity utilization, operating reliability, unit efficiency, production loss categories and quantities, and energy utilization.
• Thoroughly understand the technical Management of Change process and utilize it in support of facility changes.
• Participate in regulatory agency audits.
• Support procedure development and training related to capital projects, temporary or new modes of operation, and compliance.
• Work with Engineering and Construction departments as needed to assure O & M interests are represented on major projects.

Qualifications:

• Bachelor's degree in Chemical/Process Engineering
• A Professional Engineer’s (PE) License or equivalent CEng license is preferred
• Ten to Fifteen (10-15) years demonstrable experience as a Production Engineer in an LNG liquefaction facility is required with a solid understanding of feed gas pre-treatment, NGL/Condensate management and Storage and loading applications. Other Process related experience in petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience is a plus
• Competent in use of specialized software including but not limited to PI, Process Book, Sigmafine, HYSYS, Pro-Treat, HTRI
• Ability to communicate effectively at all levels of an organization and with individuals and groups from different disciplines, industries and governmental agencies
• Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing status

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

This is a contract position based in Cameron, LA, and will require shift work, including nights, weekends, and holidays, to ensure 24/7 coverage of marine operations. The Marine Controller will work in an office environment equipped with marine traffic systems and communications equipment, with occasional field visits as necessary.

Position Overview

The Marine Controller is a critical member of the logistics and marine operations team, responsible for monitoring, coordinating, and directing third-party vessel movements supporting the construction of an LNG plant in  Cameron, Louisiana. This position ensures the safe, efficient, and compliant operation of marine traffic within the company’s area of responsibility, leveraging advanced vessel traffic software and established communication protocols.

Key Responsibilities

• Monitor and direct the movement of third-party vessels operating in support of construction activities, ensuring adherence to company policies and regulatory standards.
• Utilize specialized vessel traffic software to track, schedule, and coordinate vessel arrivals, departures, and in-field movements.
• Communicate with vessel captains, marine agents, port authorities, Lake Charles Pilots and internal stakeholders to relay instructions, updates, and safety information.
• Maintain real-time situational awareness of all marine activities in the designated operational area, proactively identifying and addressing potential conflicts or risks.
• Operate FCC-licensed radio communications equipment to ensure clear and reliable information exchange with vessels and shore-based teams.
• Document and report vessel activities, incidents, and operational metrics using Microsoft Office tools and company reporting systems.
• Participate in regular safety meetings, drills, and marine operations reviews as required by company policy and regulatory authorities.
• Support emergency response efforts related to marine operations as a primary communications and coordination point.

Qualifications

• Proven experience in marine traffic control, vessel coordination, or related maritime operations, preferably within the oil and gas construction industry.
• Proficiency in vessel traffic software systems for marine monitoring and scheduling.
• Valid FCC radio operator license required.
• Valid TWIC card required.
• Strong Microsoft Office skills, including Word, Excel, and Outlook, for reporting and communications.
• Exceptional verbal and written communication skills; ability to interact effectively with diverse teams and external partners.
• Demonstrated ability to remain calm and decisive in high-pressure or emergency situations.
• Strong organizational skills, attention to detail, and a commitment to safety and compliance.
• Familiarity with U.S. Coast Guard regulations and marine safety standards is an advantage.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking an experienced team member to join our team in Cameron, LA. The Lead, Supplier Performance requires an in-depth knowledge of commercial contracting and project management. The Lead, Supplier Performance must be able to apply this knowledge when reviewing strategic supplier contracts and supplier performance with respect to cost, quality and on-time completion of commitments.

Responsibilities:

The Lead, Supplier Performance is responsible for managing the whole lifecycle of supplier relationships. This can include pre-sourcing activities all the way through post execution issues.

• Facilitate trackable KPI development for scopes of work related to Service RFPs
• Coordinate required site walks
• Collaborate with Houston based Contracts Team
• Provide performance data to assist with bid events
• Assist with onboarding of new Suppliers
• Conduct “Kick-Off” Meetings with awarded Suppliers
• Assist with site onboarding of supplier personnel
• Set Company expectations
• Align invoicing requirements with Cost Controls Team expectations
• Manage site based KPIs and scorecards collection for term of the work
• Collaborate with HSSE to determine frequency of HSSE KPIs based on risk ranking
• Establish and maintain open lines of communications between Company and Suppliers to avoid service delays
• Monitor scope modifications to minimize change orders and/or scope creep
• Oversee performance reviews and action plans with Suppliers
• Lead improvement projects with Suppliers
• Serve as relationship manager between Venture Global Plaquemines LNG and suppliers when issues arise

Qualifications:

• Bachelor degree in Business, Engineering, Supply Chain Management or other related discipline is preferred
• Minimum 5 years of experience in a LNG plant experience or equivalent petrochemical experience

Skills, Knowledge & Abilities:

• Strong oral and written communication skills
• Strong interpersonal and leadership skills
• Ability to understand contract language
• Demonstrated ability to analyze and resolve problems
• Demonstrated ability to lead programs / projects
• Ability to document, plan, and execute programs
• Established project management skills
• Ability to balance multiple conflicting projects to establish priorities for the overall best business outcome
• Previous experience with cross functional teams, implementing a project or program
• Previous experience leading a team
• Change agent with strong work ethic
• Knowledge of budgeting, planning, scheduling, training
• High level of HSSE knowledge
• Self-starter with ability to work strategically under little direction

Working Conditions:

• Based in Cameron, LA
• May be required to carry a cell phone and respond as needed during working and non-working hours
• May be required to work non-traditional hours as needed

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

The Manager, Information Technology – Site Services, is responsible for overseeing IT site support personnel and supports troubleshooting devices/systems utilized by the teams supporting our LNG plants. This person will ensure the IT site support team upholds great customer service, maintains personal interactions with clients and promptly answers help desk inquiries. He or she will work closely with other department heads to identify hardware or software needs. The Manager, IT Site Services will ensure projects are delivered on schedule, on budget and meet quality standards. 

Responsibilities

• Manages site project(s) for the implementation or development of software components, hardware, or computer application systems
• Manages vendors/contractors to ensure they deliver the value and services as contracted
• Ensures projects are delivered on time, on budget and with high quality
• Plans team resource needs and work closely with other managers to set clear expectations and roles for team members
• Participates in process and technology re-engineering
• Analyzes and recommends implementation options
• Provides business and technical integration across all related site activities
• Communicates plans, statuses, and issues to the leadership team
• Develop, implement and maintain IT standard operation procedures
• Analyze departmental needs, identify vulnerabilities, and boost productivity, efficiency, and accuracy to inform business decisions
• Preserves assets by implementing disaster recovery and back-up procedures and information security and control structures
• Maintains quality service by establishing and enforcing organization standards

Qualifications

• Bachelor's degree or equivalent experience in business, computer science, or management information systems
• Proven experience managing IT site services within complex industrial environments, with hands-on expertise supporting both Operational Technology (OT) and Plant Technology (PT) systems to ensure secure, reliable, and high-availability operations
• 10+ years of professional experience in operational management and the implementation of technology solutions within an energy facility or comparable industrial environment
• Ability to implement technology projects in a timely and cost-effective manner
• Strong technical skills directing technical professionals
• Ability to develop and deliver projects using (where appropriate) leading-edge technology
• Superior written and oral communication skills
• Strong analytical skills
• Self-motivated and directed, with the ability to effectively prioritize and execute tasks in a high-pressure environment
• Ability to work in both office and industrial site environments, including walking throughout facilities, standing, bending, and occasionally lifting or moving equipment up to 25–40 pounds. Must be able to use standard computer equipment and perform visual inspections of IT infrastructure while adhering to site safety and PPE requirements.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

This is contract position located in Cameron, LA. 

Key Responsibilities

• Perform inspections during installation of stationary and Rotating Equipment
• Perform preventative maintenance inspections on Stationary/Rotating Equipment
• Review and implement manufacturer installation and operation manual during installation of Stationary/Rotating Equipment
• Collaborate with equipment manufacturer technical advisors during installation of Stationary/Rotating Equipment
• Perform thorough inspections of materials and equipment upon delivery to ensure compliance with established specifications, safety standards, and contractual requirements.
• Apply independent judgment to resolve complex quality concerns, providing recommendations for corrective actions
• Maintain accurate documentation of inspections, non-conformance reports, and resolution processes to support project transparency and traceability.
• Collaborate with project management, engineering, procurement, and construction teams to proactively identify and address potential quality issues before they impact project outcomes.
• Ensure quality control procedures and standards are consistently applied, supporting continuous improvement initiatives across projects and departments.
• Provide technical guidance to team members, sharing expertise and offering mentorship in advanced inspection techniques and tools.
• Assist in the development and refinement of quality systems, processes, and inspection tools to enhance efficiency and sustainability across the organization.
• Support customer relationships by addressing quality-related inquiries with clarity, professionalism, and a solutions-focused approach.
• Participate in audits, assessments, and reviews to maintain compliance with internal and external regulatory requirements.

Education and Experience:

• 10+ years of Experience In a quality role

• 5+ years as millwright
• Extensive experience in API 686
• Technical school diploma or equivalent combination of education, training, and relevant work experience.
• Extensive experience in quality control inspection, particularly in material and equipment delivery for energy, chemicals, or resources industries.
• Proven ability to work independently, applying sound judgment to complex technical decisions and quality-related challenges.

Preferred Requirements & Qualifications:

• Industry standard certifications preferred
• 10+ years of inspection experience on-site during construction in Electrical inspection 
• Technical school graduate or equivalent combination of education, training, and relevant experience in quality control or related fields. 
• Demonstrated experience in quality control inspections with a strong understanding of industry codes, regulatory standards, and quality assurance best practices. 
• Strong decision-making and problem-solving abilities, with the capacity to work independently and exercise sound judgment in dynamic project environments. 
• Proficiency in using tools, equipment, and systems specific to quality control inspections, ensuring accurate and efficient project execution. 
• Excellent communication and collaboration skills, with the ability to engage effectively with team members and stakeholders across different disciplines. 
• Intermediate understanding of project systems, processes, and tools
• Willingness to lead and mentor others when necessary, promoting continuous improvement and a commitment to quality within the team.

What it takes to be successful in this role:

• Must be able to walk long distances
• Must be able to climb, stoop, kneel, crouch and crawl
• Must be able to stand for extended durations
• Must be able to reach in all directions
• Must have good visual acuity with regards to color, depth perception and field vision
• Must be able to work in various weather conditions including extreme heat and cold temperatures
• Must be alert and able to determine job related hazards and recognize when hazards change
• Must be able to exert up to 50 pounds of force occasionally
• Must be able to work well in a team environment and clearly and professionally communicate with other team members
• Valid driver’s license and reliable driving record is required

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost

We are seeking an experienced Specialist, CMMS.  This role will be based out of Cameron, LA at our Calcasieu Pass LNG facility. 

Responsibilities:

• Support and serve as a workstream lead for CMMS - Plant Maintenance Master Data builds or Upgrades, development & loading for assets / projects.
• Collaborate with cross-functional teams, including technical, functional, and business teams.
• Create and maintain CMMS training materials as well as conduct training sessions for end-users
• Provide first level support to users for SAP PM and SAP MM related issues, including triage and escalation of technical problems.
• Lead testing and validation of system upgrades and enhancements related to SAP PM and SAP MM.  This includes creating test scenarios and scripts, staging test data, reporting issues to the technical team and recording test results.
• Act as Subject matter expert for SAP Computerized Maintenance Management System (CMMS) strategically partnering with maintenance & operations to:
• Manage master data via governance and controls & ensure consistent use of fields within master data records.
• Support development and delivery of systems training to ensure all users are properly trained in system functionality & business use expectations.
• Oversee the data integrity and day to day operation of the CMMS system.
• Provide end-to-end support for SAP PM / MM processes, including archive and restore data; support and maintain the CMMS System reports; run queries and create ad hoc reports.
• Support any CMMS System Upgrade Projects
• Work across Global teams to collaborate, learn, and share new process rollouts.
• Validate mass data loads required for migration from legacy systems or during system implementation.
• Work with the Information Management team to ensure delivery of quality data from EPC and other contractors to populate the CMMS.

Skill Requirements:

• 5+ years of direct CMMS build experience
• Knowledge on Maintenance Strategies, Philosophies, & PM Optimization methods
• Create/Validate Maintenance Items & Plans
• Create/Validate Task list and Standard text
• Understanding of Workflows of Plant Maintenance system
• Bill of material creation and assign to task list
• Knowledge of preventive maintenance, maintenance plans, time/strategy-based Maintenance, breakdowns, and all types of repair processes.
• Knowledge of all master data objects required to support SAP PM (bills of material, equipment Master, functional locations, work Center etc).
• Experience with SAP S/4 HANA PM & MM Modules
• Experience working on MDG implementation on SAP S/4 HANA is a plus.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

Position Overview

The Marine Superintendent is a key member of our marine operations team, responsible for overseeing all third-party contractor marine activities related to the construction of an LNG plant in Cameron, Louisiana. This position ensures the safe, efficient, and compliant execution of marine logistics and operations, with a strong emphasis on safety, regulatory compliance, and operational excellence. This is a contract position located in Cameron, LA supporting or projects team for CP2. 

Key Responsibilities

• Supervise and coordinate all marine operations involving tugs and barges and other vessels ensuring compliance with company policies, industry standards, and regulatory requirements.
• Act as a point of contact for third-party marine contractors, ensuring effective communication, performance monitoring, and issue resolution.
• Monitor the performance of contractors to ensure adherence to safety protocols, operational procedures, and environmental standards.
• Conduct regular inspections and audits of vessels and marine operations, identifying and addressing deficiencies or risks.
• Facilitate safety meetings, and participate in incident investigations, and root cause analyses as required.
• Participate in the development and implementation of marine operational procedures and emergency response plans.
• Ensure compliance with U.S. Coast Guard, OSHA, and other relevant regulations.
• Maintain accurate records and reports related to marine operations, contractor performance, and incident management.
• Collaborate with internal stakeholders (logistics, HSE, operations) to optimize marine supply chain efficiency.

Qualifications & Experience

• Minimum 5 years of experience as a Marine Superintendent, Marine Manager, or similar role with a focus on tug and barge operations.
• Possess a valid TWIC card
• Previous experience managing third-party marine contractors in the oil and gas construction sector highly preferred.
• Strong understanding of marine regulations (USCG, IMO, OSHA, etc.) and industry best practices.
• Valid maritime certifications (e.g., USCG Master, Mate, or equivalent) are an asset.
• Demonstrated leadership, communication, and conflict-resolution skills.
• Proven track record of driving safety and operational excellence.
• Ability to work in Cameron, Louisiana, with periodic travel as required.
• Proficiency in marine operations management software and Microsoft Office Suite.

Key Competencies

• Strong organizational and multitasking abilities.
• Attention to detail and a proactive approach to risk management.
• Ability to work effectively in a fast-paced, high-stakes environment.
• Excellent interpersonal and relationship-building skills.
• Commitment to safety, environmental stewardship, and ethical conduct.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

This position will be based in Cameron, LA.

General Description:

The Area Planning Manager is responsible for overseeing and coordinating the contractor Planning & Advanced Work Packaging (AWP) processes and functions for our Major Capital Projects. This new position will be based in the Cameron, LA area, and report to the Senior Director, Planning & Scheduling. This position will collaborate with Venture Global project management and contractor personnel to provide leadership and oversight of planning professionals assigned to the project. The primary focus of this position will be the safe and efficient work planning of civil and structural activities, pipe installation and testing, electrical and instrumentation installation, materials management, and commissioning & start-up activities in support of the overall project schedule.

 In addition, this position will ensure contractor employs robust planning & advanced work packaging processes and procedures in accordance with the goals and expectations of the Project. The role will also require effective communication to Project and Executive Management for timely decision-making and incorporation of stakeholder input. The role will be based at our project site, with potential for travel to other project locations and contractor offices.

Responsibilities:

• Work with Project Team supporting the tracking and execution of EWPs and PWPs
• Provide oversight of the contractor’s WFPs (Workface Planners) and support development of Field Installation Work Packages (FIWP).
• Support and track execution of FIWPs
• Monitor FIWP’s with material management allowing time for material allocation
• Ensure FIWP’s are issued with enough time allocated for final installation planning
• Identify FIWP constraints and work with Project Team to remove any constraints that would prevent efficient execution of FIWPs
• Coordinate with all departments on the project to ensure planning process is fully integrated within project

Qualifications:

• Bachelor’s degree in Construction or Engineering preferred
• 10+ years of relevant construction planning and field execution experience in major Oil & Gas engineering and construction projects
• Commitment to safety
• Proficient in NavisWorks or other 3D modeling and work packaging software, such as iConstruct
• Strong Microsoft Excel, PowerPoint and Visio skills
• Experience with Power BI, SQL or similar relational database management systems preferred
• Excellent interpersonal and communications skills, with strong critical thinking and attention to detail
• Leadership experience required
• Strong work ethic with ability to effectively prioritize, meet deadlines, adapt to changing priorities and business needs, and succeed in a fast-paced environment
• Excellent attention to detail and the ability to efficiently summarize and prioritize information
• P6 Planning experience is a plus

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

This is a contract position located in Cameron, LA. 

Key responsibilities

Leadership & coordination

• Serve as the mechanical commissioning focal point across Construction, Completions, QA/QC, Vendors, Operations, and HSSE.
• Build and lead the mechanical commissioning team (CSU mechanical static and rotating, field reps), including priorities, delegation, and daily execution.
• Chair/lead mechanical readiness meetings for assigned areas/systems, drive closure of constraints.

System turnover & completions integration

• Own mechanical deliverables required for subsystem/system turnover (walkdowns, punch listing, A/B/C categorization, and closeout verification).
• Ensure mechanical tag scoping and ITR assignment are correct in the completions system (e.g., master tag register, tag type matrix/ITR mapping).
• Validate mechanical MC boundaries and subsystem breakouts support startup sequencing (RFSU/interim groupings as applicable).

Mechanical test packages & execution

• Plan and execute mechanical test and assist pre-commissioning activities, such as:
• Flushing/cleaning (lube oil, seal oil, glycol, chemical cleaning where applicable)
• Hydro/pneumatic testing support and closeout verification
• Leak/tightness testing and reinstatement
• Rotating equipment prep (alignment checks, preservation removal, bump tests support with E&I)
• Static equipment readiness (vessels, exchangers, filters/strainers) including internals and vendor requirements
• Ensure temporary systems, blinds/spades, strainers/screens, and flushing spools are managed, tracked, and removed/restored properly.

Vendor management

• Coordinate vendor reps for mechanical packages through CSU sub-contracts coord. (compressors, turbines/DRAs, pumps, air systems, cryogenic equipment, etc.).
• Manage vendor documentation requirements, punch items, and constraints needed for energization/first run.
• Ensure vendor sign-offs and warranties/records are protected via correct procedures and documentation.

Documentation & compliance

• Ensure all mechanical turnover documentation is complete and audit-ready:
• ITRs, test reports, torque/tension records, reinstatement packs, redlines/as-builts, certificates
• Support regulatory or operations readiness requirements (e.g., turnover dossiers aligned to owner expectations).

Schedule, cost, and reporting

• Build and maintain mechanical commissioning logic inputs to the integrated schedule (P6 updates through the completions system as required).
• Provide weekly progress reporting: system readiness status, constraints, look-aheads, critical path impacts, and staffing needs.
• Support estimating and forecasting for mechanical commissioning labor and vendor support.

HSSE & quality

• Enforce commissioning HSSE expectations: PTW, LOTO, SIMOPS planning, energy isolation boundaries, confined space, lifts, and pressure testing safety.
• Drive high-quality execution—right-first-time documentation, punch integrity, and disciplined change control.

Deliverables / success measures

• Mechanical subsystems turned over on schedule with complete, correct ITR closeout and minimal rework.
• Mechanical test packages executed safely with repeatable, auditable records.
• Constraints cleared early (vendor gaps, missing materials, incomplete construction, documentation shortfalls).
• Smooth transition from MC → pre-commissioning → commissioning → operations with clear ownership and handover.

Interfaces

• Commissioning Director / CSU Area managers / Leads
• Construction Superintendents & Field Engineers
• Completions/Systemization Lead (CoConsole/DocConsole owners)
• E&I Commissioning Leads, Process Commissioning Leads
• QA/QC, Turnover/Records, Document Control
• Operations/Start-up & Maintenance Representatives
• HSSE leadership and PTW/LOTO authorities
• OEM/vendor representatives and package managers

Qualifications (typical)

• 10+ years in oil & gas/LNG facilities with strong commissioning/turnover exposure; LNG export experience preferred.
• Strong mechanical systems background: rotating equipment, piping systems, static equipment, and mechanical test execution.
• Proven leadership of multi-discipline field teams and vendor coordination.
• Strong knowledge of completions/turnover workflows and ITR-based verification.
• Working knowledge of PTW/LOTO, SIMOPS, and pressure testing safety practices.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the full-time position of Operations Project, Project Lead, 

Location: Venture Global Calcasieu Pass Liquefied Natural Gas facility in Cameron, Louisiana

General Description: 

The Operations Project, Project Lead, reports to the Director of Capital Projects and will assist in the to coordinate the execution of all front-end engineering projects through a stage gate process within the Brownfields Project Team and facilitate communication between the Company Stakeholders through Project Initiation, feasibility, define, and execution phases through to handover

Responsibilities: 

• Facilitate/coordinate the front-end engineering and execution/handover process for the Brownfields Stage Gate Process for Calcasieu Pass (CP) LNG Plant to deliver the most optimum schedule and budget outcomes as well as satisfy the Company’s technical performance and integrity requirements
• Experience in Plant Operations required
• Turnaround experience required
• Develop and optimize the Brownfields Stage Gate Process for CP2
• Ensure Senior management are kept fully informed of all key risks and issues
• Monitor/coordinate performance of Company Stakeholders and ensure technical integrity of contractors and service providers
• Assist with the preparation and/or review of key approvals e.g., scopes of works and proposals, feasibility studies, contract strategies for engineering engagement, project change requests (MOC), awards and variations
• Ensure the engineering/project undertakes adequate quality assurance for internal deliverables
• Responsible for assisting coordination to all stakeholders and vendor personnel allocated to the individual projects and ensure that the safe progress of the works proceeds according to the overall schedules and achieve the objectives of the company
• Expected to perform such other duties as may from time to time be assigned by VG.  May be required to carry out such other instructions and directions as VG may from time to time reasonably and lawfully give to you

People Management

• Contribute to the development and mentoring of direct reports as allocated throughout the project
• Must abide by company policy in relation to HR policies and procedures such as annual HR cycle and meet deadlines within the appropriate timeframes

 Health Safety Security and Environment (HSSE)

• Responsible for the safety on site of team members reporting into this role by ensuring that corporate and local Health, Safety, Security and Environmental policies and regulations are applied on project activities

Qualifications 

• Bachelor’s Degree in relevant engineering discipline
• 10 years of capital project experience
• Experience in Plant Operations required
• Turnaround experience required
• Brownfield experience required
• Experience of project control systems and procedures supported by current software applications e.g., Excel, MS Project, Risk Management and Planning Software systems
• Technical professional with proven experience in engineering and execution disciplines and delivery of projects
• Varied experience of engineering, pre-engineering approvals, EPC or EPCM contracts
• Able to apply appropriate technical standards to deliver technical and execution requirements
• Understanding of discipline interfaces, execution activities and the project development and delivery process needed to enable quality control of Project Teams technical work, and ensure appropriate techniques and standards are applied and improvement opportunities are realized
• Verifiable performance and delivery working as a team member through two or more responsible project assignments
• Interact with a range of internal and external stakeholders
• Awareness of VG’s (or equivalent) functional project and technical assurance processes
• Contributes to improve parts of projects e.g., initiate a change to a project specification/procedure
• Coordinates the preparation of changes in lines with the MOC (Management of Change) procedure
• Able to apply HSSE principles across all project’s technical activities
• Understands the impact of strategic considerations on business decisions and has contributed to negotiations with contractors
• Understands the impact of strategic considerations on business decisions and project execution
• Able to travel up to 65%
• Client-side experience preferred
• Professional Engineer license preferred 
• Good team player with a pro-active and flexible attitude
• Good communicator able to challenge others in a constructive manner and negotiate successfully to achieve positive outcome

  VG Employees and Contractors

• Everyone has a duty and the authority to stop work which they believe is unsafe – all staff, regardless of level or position have explicit authority to stop any working practice, process, or activity, by any VG employee, contractor or third party, which they believe is unsafe and may potentially cause harm, or represents a future risk of harm, to any work colleague, or associated people and / inhabitants without fear of reprisal

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Senior Engineer, Electrical to join our Calcasieu Pass Facility Team in Louisiana.

This role reports to the Director, Operations Engineering and will be responsible for supporting the development and progressing the Ready for Operations (RFO) activities, ensuring a seamless transition of the facility from EPC to the operations phase.

The successful candidate shall have technical expertise in the Electrical Engineering discipline with in-depth understanding on motors, transformers, switchgear and other electrical equipment. The incumbent shall also be familiar with associated industry standards, guidelines and codes.

A working knowledge of general plant equipment in the Oil & Gas industry is also key to the successful performance of this job.

Aside, the successful candidate shall exhibit excellent written and oral communication skills in English as the role is expected to produce coherent, high quality documents, be a self-starter and develop on conceptual ideas with minimal guidance.

The successful candidate shall provide, as a minimum, intermediate level Reliability Engineering support to the Operations team with focus in the following areas:

• Root Cause Failure Analysis (RCFA): With expertise in relevant techniques to adequately lead RCFA exercises for failures relating to plant equipment and/or processes.
• Reliability Centered Maintenance (RCM): With adequate knowledge in relevant techniques to drive fine-tuning & improvements in existing Maintenance practices to achieve a cost-effective, yet safe robust Maintenance strategy.

Responsibilities:

• Serves as a resident company Technical Expert, providing advice and guidance on Electrical system engineering issues.
• Provide day-to-day Electrical systems support to the Maintenance & Operations teams to ensure continued operability of plant equipment.
• Providing advanced diagnostic support, to allow rapid production recovery, in the event of equipment failure and forced plant outages.
• Provide Root Cause Failure Analysis (RCFA) leadership during RCFA exercises and provide technical summaries (with causes and recommendations) to concerned parties.
• Provide interpretation and evaluation services to analysis and recommendations from the Reliability Technicians on predictive programs.
• Support HAZOPs, LOPAs and other Process Hazard Analysis (PHA)
• Provide support to the Maintenance team for Turnaround planning and execution.
• Supports availability tracking and improving the overall reliability for plant equipment and Responsible for evaluating the workflow process, identification of critical spares, spare parts storage and preservation requirements for Electrical systems throughout the plant

Qualifications:

• Education and Certifications: 
• Minimum Bachelor’s degree in Electrical Engineering
• A Professional Engineering License is preferred.

• Experience: 
• A minimum of five to ten (5-10) years’ experience working in an engineering capacity, with Electrical equipment in an industrial setting in engineering or operations. Supervisory experience will be considered an asset
• Oil and Gas experience is required, with preference in LNG applications, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable.
• Extensive knowledge of motors, gas turbines (Frames & Aero-derivatives) and compressors is required

• Additional Skills:
• Knowledge of CMMS Systems
• Power system analysis
• RCFA tools for conducting failure analysis

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

This is a contract position located in Cameron, LA.

The E&I (Electrical & Instrumentation) Coordinator is responsible for client oversight and coordination of electrical, instrumentation, and controls construction activities in one of the various areas of a major LNG facility located in Cameron, LA. Areas include PTM, LFM, PIS, BOP, BOG, NRU, Tanks, & Marine. He or She is responsible for ensuring that construction work is performed according to the project requirements and expectations with specific attention to safety, schedule, budget, & quality.

Responsibilities:

• Manage the daily E&I construction tasks and teams for their respective area
• Review all equipment and manpower employed by the Subcontractor to ensure they are adequate for available work fronts
• Collaborate as a member of an IPMT (integrated project management team)
• Interpret and explain technical information to other professionals
• Report work progress, schedule, and other details using established project reporting tools
• Review and ensure coordination is in place with subcontractor activities
• Respond to work delays, emergencies, and other problems
• Prior to the start of work, review IWP (individual work packages) and P6 schedules submitted by the subcontractor to ensure their correct application in the field execution
• Ensure the implementation of all the HSE procedures and standards for all activities
• Directly participate in the HSE activities at site as defined in the Site HSE plan
• Support the RFI (request for information) process to help drive timely solutions
• Other needs as determined by project leadership
• Employee has solid line direct reporting to the E&I Construction Manager and dotted line reporting to Area Construction Manager

Qualifications:

• 10 or more years of electrical & instrumentation experience in industrial construction of oil & gas facilities (required)
• 10 or more years of supervisory experience with recent positions being at least a general foreman level (required)
• Construction experience in an LNG facility (preferred but not required)
• Experience working on Client side as representation in the field (preferred but not required)
• Any state journeyman or master electrician license (preferred but not required)
• NCCER industrial journeyman electrician, instrument fitter, or instrument technician certification (preferred but not required)
• Completion of a relevant trade school program (preferred but not required)
• OSHA 30 (preferred but not required)
• Experience planning and executing work through the AWP (Advanced Work Packaging) process (preferred but not required)
• Strong knowledge of NEC 70 and NEC 70E requirements (required)
• Demonstrated technical and analytical skills (required)
• Excellent verbal and written communications skills (required)
• Ability to work within an IPMT team with demonstrated strong interpersonal skills (required)
• Demonstrated self-motivation and direction with strong bias toward timely performance and problem resolution (required)
• Basic computer skills including experience with Microsoft Office (required)
• Transportation Worker Identification Card (TWIC) (required)
• Valid Driver’s License with insurable driving record (required)

Physical Requirements:

• Manual and finger dexterity
• Hand-eye coordination
• Depth perception
• Ability to see things clearly that are beyond arm’s reach (far visual acuity)
• Ability to see small detail
• Ability to lift and carry up to 50 pounds
• Ability to climb 30-foot ladders without resting
• Ability to maintain balance on catwalks and narrow workspaces
• Ability to stand for long periods of time
• Ability to reach above head while sitting or standing
• Ability to reach below knees while standing
• Ability to stoop or kneel
• Ability to work 60 or more hours each week
• Ability to work at heights a minimum of 20 feet
• Ability to perform in an outdoor noisy work environment

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

This is a contract role located onsite in Cameron, LA. 

KEY RESPONSIBILITIES

• Review of specifications, procedures and specified standards utilized on the construction site
• Electrical tsting monitoring
• Inspection, witnessing or verification to establish the quality of a material, structure or system
• Factory acceptance tests of installations and equipment
• Monitoring electrical systems of plant equipment before and during installation
• Organization and implementation of record retention systems
• Inspect materials, workmanship, and processes to verify conformance with project specifications and industry codes, ensuring quality, compliance, and safety throughout the project lifecycle. 
• Collaborate with senior inspectors and project teams to troubleshoot and resolve complex challenges, contributing to the successful delivery of innovative, sustainable projects. 
• Exercise independent judgment in selecting work methods and making improvements, while aligning with company policies and project goals. 
• Ensure timely and accurate completion of all inspections and reports
• Review work for completeness and accuracy, adhering to industry standards and promoting compliance with regulatory requirements. 
• Participate in ongoing training to enhance skills and knowledge, fostering both personal development and the continuous improvement of the team. 
• Provide occasional guidance and support to team members, sharing best practices and promoting a collaborative and high-performance culture. 
• Communicate findings and recommendations clearly to both technical and non-technical stakeholders, ensuring transparency and alignment with project objectives. 
• Demonstrate an intermediate understanding of relevant systems, processes, and tools
• Collaborate with engineering, procurement, and construction teams to ensure adherence to project quality standards.
• Identify and document non-conformities, ensuring appropriate corrective actions are taken in alignment with project and company guidelines.
• Participate in quality audits and assessments, contributing to continuous improvement initiatives.
• Provide guidance on quality assurance practices, assisting teams in understanding and applying relevant quality procedures.
• Support project execution by offering technical expertise in mechanical quality control, helping to resolve issues and optimize performance.
• Maintain accurate and detailed records of inspection results, tests, and compliance reports for internal and external stakeholders.

Preferred Requirements & Qualifications:

• Industry standard certifications preferred
• 10+ years of inspection experience on-site during construction in Electrical inspection 
• Technical school graduate or equivalent combination of education, training, and relevant experience in quality control or related fields. 
• Demonstrated experience in quality control inspections with a strong understanding of industry codes, regulatory standards, and quality assurance best practices. 
• Strong decision-making and problem-solving abilities, with the capacity to work independently and exercise sound judgment in dynamic project environments. 
• Proficiency in using tools, equipment, and systems specific to quality control inspections, ensuring accurate and efficient project execution. 
• Excellent communication and collaboration skills, with the ability to engage effectively with team members and stakeholders across different disciplines. 
• Intermediate understanding of project systems, processes, and tools
• Willingness to lead and mentor others when necessary, promoting continuous improvement and a commitment to quality within the team.

What it takes to be successful in this role:

• Must be able to walk long distances
• Must be able to climb, stoop, kneel, crouch and crawl
• Must be able to stand for extended durations
• Must be able to reach in all directions
• Must have good visual acuity with regards to color, depth perception and field vision
• Must be able to work in various weather conditions including extreme heat and cold temperatures
• Must be alert and able to determine job related hazards and recognize when hazards change
• Must be able to exert up to 50 pounds of force occasionally
• Must be able to work well in a team environment and clearly and professionally communicate with other team members
• Valid driver’s license and reliable driving record is required

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

Position Summary:

We are looking for an experienced System Engineer with strong expertise in VMware virtualization, Windows/Linux server administration, cloud infrastructure, and enterprise backup solutions. This role is responsible for ensuring our server environments are reliable, secure, well-architected, and capable of supporting business growth. You will play a key role in managing and optimizing our on-premises data center and cloud platforms, while ensuring robust disaster recovery and business continuity.

Responsibilities:

• VMware ESXi hosts, clusters, vCenter, and virtual server infrastructure.
• Administer Windows and Linux servers, Active Directory, Group Policy, DNS, DHCP, and related core services.
• Support and enhance cloud environments (Azure / AWS / Private Cloud).
• Configure and manage Azure and AWS networking components ( NSG, routing, and access control).
• Storage and Backup Solution
• Maintain and optimize SAN/NAS storage systems and server hardware.
• Implement and manage backup and disaster recovery solutions (Veeam / Druva etc.).
• Managing tape library backup with tape cycle for offsite backup management
• Monitor server performance and integrity using tools such as Logic Monitor and Live Action. 
• Resolve escalated issues across cloud and on‑prem infrastructure.
• Monitor system performance, security, and capacity to ensure high availability.
• Security Patching and vulnerability mitigation
• Apply system patches, firmware upgrades, and lifecycle management.
• Troubleshoot infrastructure issues and provide tier-3 escalation support.
• Participate in on-call rotation for critical systems and after-hours maintenance.
• Maintain comprehensive technical documentation and Infrastructure diagrams.
• Identify and recommend enhancements to server performance, capacity, and scalability.

Qualifications:

• Bachelor’s degree in Computer Science, Information Systems, or related field (or equivalent experience).
• 8+ years hands-on experience supporting server and virtualization environments.
• Virtualized Environment, ESXi, Storage and FiberChannels
• Active Directory site services, replication, OU, Group policy 
• Experience working with cloud platforms (Azure, AWS, or similar).
• Solid experience with Windows Server and/or Linux administration.
• Experience of managing Veeam backup environment for enterprise. 
• Datacenter Server and storage environment experience 
• Strong knowledge of VMware technologies (ESXi, vCenter, vSAN preferred).
• Ability to document system processes, architecture diagrams, and procedures.
• Strong understanding of networking fundamentals (TCP/IP, VLANs, firewalls, routing).
• Strong verbal and written communication; ability to mentor and collaborate across teams.
• VMware VCP, Microsoft MCSA/MCSE, Azure/AWS Associate, or equivalent experience are a plus.

Preferred Qualifications:

• Advanced knowledge of Linux OS for appliance support.
• Familiarity with access control models and network security frameworks.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

This is a contract position located in Cameron, LA.

Key Responsibilities

• Perform thorough inspections of materials and equipment upon delivery to ensure compliance with established specifications, safety standards, and contractual requirements.
• Apply independent judgment to resolve complex quality concerns, providing recommendations for corrective actions
• Maintain accurate documentation of inspections, non-conformance reports, and resolution processes to support project transparency and traceability.
• Collaborate with project management, engineering, procurement, and construction teams to proactively identify and address potential quality issues before they impact project outcomes.
• Ensure quality control procedures and standards are consistently applied, supporting continuous improvement initiatives across projects and departments.
• Provide technical guidance to team members, sharing expertise and offering mentorship in advanced inspection techniques and tools.
• Assist in the development and refinement of quality systems, processes, and inspection tools to enhance efficiency and sustainability across the organization.
• Support customer relationships by addressing quality-related inquiries with clarity, professionalism, and a solutions-focused approach.
• Participate in audits, assessments, and reviews to maintain compliance with internal and external regulatory requirements.

Education and Experience:

• 10+ years of Experience
• Technical school diploma or equivalent combination of education, training, and relevant work experience.
• Extensive experience in quality control inspection, particularly in material and equipment delivery for energy, chemicals, or resources industries.
• Proven ability to work independently, applying sound judgment to complex technical decisions and quality-related challenges.

Preferred Requirements & Qualifications:

• Industry standard certifications preferred
• 10+ years of inspection experience on-site during construction in Electrical inspection 
• Technical school graduate or equivalent combination of education, training, and relevant experience in quality control or related fields. 
• Demonstrated experience in quality control inspections with a strong understanding of industry codes, regulatory standards, and quality assurance best practices. 
• Strong decision-making and problem-solving abilities, with the capacity to work independently and exercise sound judgment in dynamic project environments. 
• Proficiency in using tools, equipment, and systems specific to quality control inspections, ensuring accurate and efficient project execution. 
• Excellent communication and collaboration skills, with the ability to engage effectively with team members and stakeholders across different disciplines. 
• Intermediate understanding of project systems, processes, and tools
• Willingness to lead and mentor others when necessary, promoting continuous improvement and a commitment to quality within the team.

What it takes to be successful in this role:

• Must be able to walk long distances
• Must be able to climb, stoop, kneel, crouch and crawl
• Must be able to stand for extended durations
• Must be able to reach in all directions
• Must have good visual acuity with regards to color, depth perception and field vision
• Must be able to work in various weather conditions including extreme heat and cold temperatures
• Must be alert and able to determine job related hazards and recognize when hazards change
• Must be able to exert up to 50 pounds of force occasionally
• Must be able to work well in a team environment and clearly and professionally communicate with other team members
• Valid driver’s license and reliable driving record is required

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a  to join our team in Cameron, LA at our Calcasieu facility in Louisiana.

This role reports to the Manager, Operations Engineering and will be responsible for supporting the development and progressing the Ready for Operations (RFO) activities, ensuring a seamless transition of the facility from EPC to the operations phase.

The successful candidate shall have  technical expertise in the Electrical Engineering discipline with in-depth understanding on motors, transformers, switchgear and other electrical equipment. The incumbent shall also be familiar with associated industry standards, guidelines and codes.

A working knowledge of  general plant equipment in the Oil & Gas industry is also key to the successful performance of this job.

Aside, the successful candidate shall exhibit excellent written and oral communication skills in English as the role is expected to produce coherent, high quality documents, be a self-starter and develop on conceptual ideas with minimal guidance.

The successful candidate shall provide, as a minimum, intermediate level Reliability Engineering support to the Operations team with focus in the following areas:

• Root Cause Failure Analysis (RCFA): With expertise in relevant techniques to adequately lead RCFA exercises for failures relating to plant equipment and/or processes.
• Reliability Centered Maintenance (RCM): With adequate knowledge in relevant techniques to drive fine-tuning & improvements in existing Maintenance practices to achieve a cost-effective, yet safe robust Maintenance strategy.

Responsibilities:

• Serves as a resident company Technical Expert, providing advice and guidance on Electrical system engineering issues.
• Provide day-to-day Electrical systems support to the Maintenance & Operations teams to ensure continued operability of plant equipment.
• Providing advanced diagnostic support, to allow rapid production recovery, in the event of equipment failure and forced plant outages.
• Provide Root Cause Failure Analysis (RCFA) leadership during RCFA exercises and provide technical summaries (with causes and recommendations) to concerned parties.
• Provide interpretation and evaluation services to analysis and recommendations from the Reliability Technicians on predictive programs.
• Provide support to the Maintenance team for Turnaround planning and execution.
• Supports availability tracking and improving the overall reliability for plant equipment and Responsible for evaluating the workflow process, identification of critical spares, spare parts storage and preservation requirements for Electrical systems throughout the plant

Qualifications:

• Education and Certifications: 
• Minimum Bachelor’s degree in Electrical Engineering
• A Professional Engineering License is preferred.

• Experience: 
• A minimum 12 years experience working in a senior engineering capacity, with Electrical equipment in an industrial setting in engineering or operations
• Oil and Gas experience is required, with preference in LNG applications, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable.
• Extensive knowledge of motors, gas turbines (Frames & Aero-derivatives) and compressors is required
• Experience with MV(1.38kV/416oV) and LV (480V) Switchgear and MCC's required
• Experience with HV (138V or above) systems and Gas insulated Switchgear (GIS) preferred

• Additional Skills:
• Knowledge of CMMS Systems
• Power system analysis
• RCFA tools for conducting failure analysis

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking an Instrument and Control System Engineer to join our project team in Cameron, LA. 

The role will be part of the site engineering team responsible for ensuring that the Plant Instrumentation and Control Systems operate as per design, in a safe and reliable manner with minimal downtime.  

Responsibilities: 

• I&C MOC/HAZOP/RFI signoff
• Site I&C technical authority
• Ensure contractor adheres to project standards
• Assist PSSR close our and walk downs
• Assist I&C Design Manager as needed
• Participate in Site Acceptance Test.
• Review progress of assigned systems
• Review and approve temporary modifications to I&C equipment.
• Provide input to weekly site engineering report

Qualifications: 

• Bachelor’s degree in Electrical, Chemical, Electronics, or Computer Engineering, preferably with specialization in Process Control, Control systems, and Instrumentation.
• Minimum 10 year’s experience working with instrumentation and control systems.

Experience with:

• Plant Instrumented Control and Safety Systems (e.g. Distributed Control Systems (Mark VIe & Emerson), Safety Systems (Mark VIe, Emerson, HIMA), Fire and Gas Systems, and Programmable Logic Controllers (Allen Bradley, Siemens, Emerson/GE, etc.)
• Operational Technology Networks, Firewalls and Cyber Security
• Field Instrumentation for process measurement (e.g. Pressure, Temperature, Level, Flow, etc.)  Control Valves, Shutdown Valves (Air, Gas, and Motor Operated), Analyzers (H2S, Moisture, etc.) Gas Chromatographs, Flow Metering Systems (Ultrasonic, Coriolis, Differential Pressure, etc.) and their transmission systems (e.g. 4-20mA, Hart, ProfiBus, etc.)
• Alarm Management Systems including Management of Alarm databases and audits against Operating systems
• Experience in LNG liquefaction facilities highly preferred  

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Vice President, Training located in either our Houston, TX location or our Louisiana locations. 

Venture Global is embarking on a transformational journey to elevate how we train, develop, and empower our people. As we continue to expand our footprint and operational excellence, the Vice President of Training will play a critical leadership role in shaping the company’s future workforce capability.

This executive will design and lead a multi-year roadmap to build a world-class training organization — integrating onboarding, compliance, technical skills, and immersive learning technologies — to ensure Venture Global’s teams are equipped to operate safely, efficiently, and innovatively across the value chain.

Responsibilities

• Strategic Leadership
• Develop and execute a 3-year enterprise training strategy focused on onboarding, regulatory compliance, technical skill development, and leadership readiness.
• Partner with Operations, HSSE, Engineering, and HR leaders to align training with business priorities, regulatory standards, and operational
• Define and implement a Learning Framework that integrates digital learning, simulators, and real-world field experience.
• Training Infrastructure & Technology
• Support the roll-out of the centralized Learning Management System (LMS) for competency tracking, certification management, and
• Competency Assurance Management System - Create, Implement and Administer a fit for purpose CAMS process
• Support leadership training programs
• Lead the build-out of training facilities across LNG sites, including field training simulators, labs, and digital learning environments.
• Introduce immersive training technologies (VR/AR, digital twins, simulation platforms) to accelerate operator and technician readiness.
• Establish a centralized Learning Management System (LMS) for competency tracking, certification management, and analytics.
• Oversee design and deployment of  technical, compliance, and leadership training programs in partnership with human resource
• Champion a culture of continuous learning and improvement across all sites.
• Embed training metrics and feedback loops into RCA/CAPA, lessons learned, and performance reviews.
• Partner with external institutions and LNG leaders to benchmark and integrate best practices.
• Metrics & Governance
• Establish KPIs to measure training impact — time-to-competence, certification rates, compliance completion, and skill progression.
• Report progress and ROI of training investments to the executive leadership team.

Qualifications

• Fifteen or more years of experience in learning, development, or operational training leadership within the LNG sector.
• Experience and knowledge in Industrial training and operations
• • Extensive experience in technical training and competency strategies
  • Proven success in building training organizations or academies at scale, ideally involving immersive or simulation-based learning.

• Deep understanding of LNG operations, safety, and compliance frameworks
• Executive presence with strong influencing and stakeholder management skills.
• Track record of leading cross-functional transformations and delivering measurable capability uplift

Success Profile

• Visionary – Can translate VG’s growth strategy into a sustainable learning architecture.
• Operationally Grounded – Understands field realities and operational urgency in LNG operations.
• Innovative – Brings technology adoption to transform the learning experience
• Collaborative – Builds bridges across functions for unified outcomes
• Metrics-Driven – Focused on measurable results and ROI

Mission:

• Baseline training landscape, modernize onboarding/compliance, implement LMS.
• Deploy field simulators, immersive learning pilots, and standardized certifications.
• Establish Training Center of Excellence  - global benchmark for LNG training, safety, and leadership

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are looking for a Director, Project Quality to join our team in Cameron, LA. The ideal candidate will be responsible for the implementation of the project quality management system, quality plans, procedures, templates, and training programs across the project organization, and interfacing with the Quality Leadership team to ensure feed back from the execution team are implemented as part of our Continuous Improvement Initiative. 

Responsibilities

• Develop and Implement Quality Management Systems, including developing quality plans, establishing metrics, and ensuring compliance with industry standards.
• Lead, train, and mentor a team of Quality Assurance and Quality Control staff, and organize daily tasks to ensure effective quality management.
• Implement and manage corrective and preventative actions for non-conformances, track quality issues, and resolve them before they impact project timelines or budgets.
• Prepare and present data-driven quality reports to senior leadership, highlighting performance, trends, and risks.
• Monitor and inspect all phases of construction to ensure compliance with project specifications, standards, and regulatory requirements.
• Collaborate with senior leadership, engineers, subcontractors, and business units to ensure alignment on quality standards and objectives.

Qualifications

• Minimum of 10 years of experience in Construction Quality management, in the energy industry, preferably in LNG
• Bachelor's degree in Engineering, Quality Management, Project Management, Industrial Technology, or related field preferred
• Must have strong knowledge and understanding of construction process, materials, quality standards, and legal/regulatory requirements
• Strong knowledge of API Q1, ISO 9001, international quality standards, and technical matters related to ASME and API codes and standards
• Experience with audits, inspections, and subcontractor evaluations
• Well-articulated with excellent written and verbal communication, planning, computing, technical, and interpersonal skills
• Strong analytical and problem-solving skills
• Ability to work independently and as part of a team
• Willingness to travel, both domestic and international
• Ability to perform multiple tasks, work within project deadlines and adjust as priorities change
• Possess the ability to mentor others through technical training and guidance
• Have the ability to read and interpret engineer drawings to include P&IDs, Civil/Structural plans and details, Electrical Wiring Diagrams, Piping Isometrics, etc.
• Broad knowledge and understating of all industry codes, standards, and industry best practices
• Have advanced computer experience with Smartsheet, SharePoint, BI, Adobe, Microsoft Office, PowerPoint, and Excel Work products
• Ability to obtain a TWIC Card

Preferred Minimum Certifications

• ASQ Certifications
• PMI Certifications (PMP, RMP)
• API/AWS/ASME Certifications
• ASNT Certifications

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Process Engineer to join our team in Cameron, Louisiana to support the Calcasieu Pass Facility. This role reports to the Manager, Process Engineering, and will support the review of process design and operations engineering functions to meet the objectives of the project as delivered by the EPC and external consultants.

The successful candidate will have strong design understanding and operational expertise of key equipment involved in LNG liquefaction facilities with demonstrable experiences working with Feed Gas and Pre-Treatment systems, Liquefaction and Refrigeration Systems, HHC Management systems, Storage and Loading / BOG management Systems.

 Responsibilities:

• Support the development and progression of the Ready for Operations (RFO) schedule to transition the facility from EPC to the operations phase.
• Provide daily support to plant Production personnel in troubleshooting process issues and concerns by integrating fundamental principles of fluid flow, heat transfer, thermodynamics, and hydrocarbon process chemistry
• Support the development and utilize Process Monitoring tools that monitor process efficiency and make improvement recommendations to enhance production and efficiency performance.
• Develop comprehensive Operations and Engineering procedures to support new and enhanced as well as special operating modes of the CP facility
• Provide Process Engineering support for plant shutdowns/turnarounds
• Perform economic evaluations of equipment alternatives with emphasis on availability and reliability projections and life cycle costs.
• Support process improvement studies, performance optimization, incident investigations, economic evaluations, technical audits, and safety studies.
• Development of process simulations for process units, updates and modifies process simulation models.

Qualifications:

• Education and Certifications: 
• Minimum Bachelor's degree in Chemical Engineering
• Professional Engineer's (PE) License or equivalent CEng license is preferred.

• Experience: 
  • Possess effective computer skills; Microsoft Office software, and discipline specific software applications: HYSYS, Aspen Plus, etc.
  • Skilled in the application of relevant major design codes and standards.
  • Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing status
• A minimum of five (5) years’ experience working in an engineering capacity in an industrial setting in engineering or operations
• Oil and Gas experience is required, with preference in LNG applications, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable.
• Exhibit excellent written and oral communication skills.
• Experience in key aspects of process engineering from conceptual design, economics, detailed engineering, plant startup, operations, and troubleshooting.
• Commissioning, start-up, and performance testing at project sites is a plus.
• Strong understanding of key equipment involved in LNG liquefaction facilities.
• Additional Skills:

• Additional Skills:
• Possess effective computer skills; Microsoft Office software, and discipline specific software applications: HYSYS, Aspen Plus, etc.
• Skilled in the application of relevant major design codes and standards.
• Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing status.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Principal Process Engineer to join our team in Cameron, LA.  This role reports to the Manager, Operations Engineering and will support the review of process design and operations engineering functions to meet the objectives of the project as delivered by the EPC and external consultants.

 Responsibilities:

• Support the development and progression of the Ready for Operations (RFO) schedule to transition the facility from EPC to the operations phase.
• Serve as the project focal points for all areas of process engineering to ensure that the project is executed according to agreed budgets, schedules, and design requirements.
• Responsible for process engineering deliverables to ensure they comply with the project design and operation philosophies.
• Prepare heat and material balance, process flow diagrams, piping, and instrumentation diagrams.
• Responsible for system design parameters, and design or rating of equipment such as heat exchangers, vessels, towers, etc. and provide technical guidance on complex design issues.
• Review and coordinate with licensors, vendors, and subcontractors to ensure proper and complete integration within the project plan.
• Development of process simulations for complex units, updates and modifies process simulation models.
• Process improvement studies, performance optimization, incident investigations, economic evaluations, technical audits, and safety studies.
• Support during construction to ensure site technical queries, non-conformances, concession requests are properly resolved.
• Evaluation of requests for deviations or exemptions to the established specifications and project standards.
• Perform economic evaluations of equipment alternatives with particular emphasis on availability and reliability projections and life cycle costs.

Qualifications:

• Bachelor’s degree in Chemical Engineering
• Professional Engineer’s (PE) License or equivalent CEng license is required. 
• Minimum of ten (12) years of experience as a Senior Process Engineer in the LNG industry.
• Exhibit excellent written and oral communication skills.
• Experience in all aspects of process engineering from conceptual design, economics, detailed engineering, and plant startup and troubleshooting.
• Commissioning, start-up, and performance testing at project sites is a plus.
• Strong understanding of key equipment involved in LNG liquefaction facilities.
• Possess effective computer skills; Microsoft Office software, and discipline specific software applications: HYSYS, Aspen Plus, etc.
• Skilled in the application of relevant major design codes and standards.
• Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing status.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking for a OFE Field Technical Lead to join our team in Cameron (LA) in the Owner Furnish Equipment (OFE) Engineering organization. They will work in the Projects organization which is responsible for the delivery and for the achievement of successful operational performances of the Owner Furnished Equipment (OFE) at Venture Global facilities. OFE are key packages purchased at strategic partners (Original Equipment Manufacturers or Technology licensors) and directly managed by Venture Global.

The OFE Field Technical Lead (Gas Processing), will have the following responsibilities:

• Focal point for management of technical issues occurring at site on OFE technologies installation, commissioning, start up and performance testing, with responsibility for the effective coordination between Venture Global site team, Venture Global engineering and the OFE Suppliers engineering teams located at home offices.  
• Support site RFI process between Venture Global site team EPC and Owner Furnished Equipment suppliers as far as technical issues, deviations and non-conformities on the assigned OFE Scope (Gas processing plant) are concerned.
• Support the resolution of quality issues related to defective or non-conforming workmanship or materials and is responsible for the resolution of relevant Root cause analysis when the issue has a significant engineering content.
• Support systems completion process including completion of Punch list items. Ensure engineering actions relevant to the punch list items are duly tracked and follow up until closure
• Support commissioning activities for the assigned OFE Scope (Gas processing plant). 
• Support of change processes relevant to changes originated by site activities and follow up the update of relevant engineering documentation with the OFE supplier’s engineering team.
• Support constructability program and provide technical feedbacks for resultion of constructability issues. 
• Act as technical subject matter expert for gas processing plant start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions.
• Support Venture Global Commissioning and Start up team in planning, coordination and stewardship of field execution of start-up and commissioning activities including degreasing, vessel loading, flushing, and initial system operation.
• Support Venture Global Commissioning and Start up team in the development of systems completion planning including review of process system boundaries, sequencing and priorities, P&ID markups, check sheets, etc.
• Coordinate performance testing activities between Venture Global Commissioning and startup and operation teams and OFE supplier’s engineering and field service teams.
• Support as technical advisor for the OFE technology overall site construction and commissioning priorities to drive mechanical completion and commissioning target dates.
• Apply lessons learned; participate in lessons learned reviews and provide input to close-out report section upon completion of turnover.
• Interact with Venture Global OFE teams in charge of project delivery and as part of the OFE Engineering organization contributes to continuous improvements and excellence of technical due diligence practices.

 Basic Qualifications

• Bachelor’s degree in Mechanical or Chemical Engineering
• Minimum 5 years experience with design, startup, commissioning, or operation of relevant OFE technology (gas processing) is required. Experience representing asset owner in these roles is a plus.
• Broad base of general engineering knowledge including mechanical, electrical, and I&C.
• Minimum of five years multi-discipline engineering management experience
• Broad knowledge of Codes, Standards, and Industry Best Practices
• Team player with a mindset to work with a global team and with diverse cultures
• Experience working on projects with multiple interfaces.
• The candidate will be required to travel domestically.
• Must exhibit a strong desire to take ownership of deliverables
• Experience with systems completion, commissioning, or turnaround activities is a plus.
• Able to read detailed construction drawings and specifications detailing the system design, including P&IDs, C&Es, and one lines
• Excellent technical, practical, and communication skills.
• Ability to perform multiple tasks and work within project deadlines, and adjust as priorities changes occur
• PMI or equivalent Internationally recognized project management certification is preferred.
• Possess the ability to mentor others through technical training and guidance on planning, scheduling, and engineering subjects
• Have advanced computer experience with Microsoft Office, Microsoft Projects, PowerPoint, and Excel

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. 

We are seeking an experienced Subcontracts Manager, who is familiar with engineering, procurement and construction contracts and large infrastructure and/or energy projects, to administer and enforce construction contracts associated with the Company’s LNG projects.  Subcontract Manager will manage all phases of the project subcontracts, including preparation of subcontracts plan, bidders’ pre-qualification, subcontracts formation, risk assessment, execution, ongoing contract and change management, reporting and formal contract close-out procedures. This individual will participate in a multi-disciplinary team that provides contracts oversight, implementation, and support.

The Subcontracts Manager will support the Site Construction Manager and Project Team as necessary. This position will be located in Cameron, LA.

Key Responsibilities:

• Working as part of the Project Team in developing and forming subcontracts.
• Leadership and oversight for Subcontract Administrators.
• Managing all phases of engineering and construction subcontracts, including pre-qualification, formation, execution and close-out.
• Creating and maintaining project subcontract plans.
• Sourcing potential subcontractors and performing bidders’ qualification in collaboration with HSE and QA/QC teams.
• Ensuring proper technical inputs needed for the award of subcontracts are timely received from proposals and project technical teams, avoiding to the extent possible any post-award changes.
• Creating and issuing RFQs, adding value to the scope of work, technical documents, and project schedule.
• Soliciting and ensuring proper review of RFQ package documents for completeness prior to issue.
• Receiving and analyzing proposals, negotiating the terms of the subcontracts with the support of the Project and Legal teams.
• Obtaining NDAs from bidders/subcontractors, as required.
• Conducting subcontracts pre-award, project kick-off and status meetings.
• Preparing, with the collaboration of the Project Team, the Subcontract Bid Assessment & Recommendation for award to be reviewed and approved by management.
• Subcontract execution/formalization, following Company Guidelines and Procedures.
• Tracking and auditing subcontract document list working in conjunction with the Document Control Team.
• Reviewing and analyzing quantity assessment provided by Project Controls for invoice validation and subcontract productivity.
• Ensuring all required subcontractor insurance is in place prior to the performance of any Work.
• Attending Site construction meetings, as required.
• Overall Change Order management, including working closelywith the relevant Project stakeholders to finalize change order documentation.
• Performing subcontract risk assessment.
• Monitoring and reviewing invoices from subcontractors.
• Obtaining Lien Releases and completion certificates from subcontractors.

Job Qualifications:

• Highest Level of Education Required for this Position:
• Bachelor’s degree in Engineering, Law, Business or related field is preferred.
• Minimum 7-10+ years of professional experience with contract / subcontracts.
• Minimum 5 years of professional experience in engineering / construction subcontracting activities for the oil and gas industry.
• Willingness to travel
• Willingness to work on Project Site, in Louisiana
• Detailed knowledge of contract agreements, legal requirements involved in contracts, compensation methods, invoicing and change order processes required.
• Able to effectively communicate across various disciplines and with contract counterparties. 
• Excellent analytical and problem-solving skills, with an ability to spot issues and risks and escalate when appropriate.
• Excellent writing skills, including drafting of simple legal documents.
• Ability to prioritize and meet critical deadlines.
• Attention to detail and ability to manage commercially sensitive and confidential information.
• Ability to work independently as well as with team members and take direction in a fast-paced and dynamic environment.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking an experienced Network Engineer to design, deploy, and maintain high‑availability LAN, WLAN, and WAN environments. The ideal candidate will possess deep expertise in enterprise networking, cloud connectivity, and security, and will mentor junior staff while driving continuous improvement of our network infrastructure.

 Responsibilities

• Architect and implement LAN, WLAN, and WAN solutions that meet business requirements. 
• Configure and install servers, routers, switches, and other network devices.
• Administer Palo Alto, Cisco, and Fortinet firewalls. 
• Design, test, and enforce access authentication, VPN, and disaster‑recovery procedures.
• Configure and manage Cisco core, WAN, and management switches, VLANs, and ASR platforms. 
• Implement BGP, OSPF, and other routing protocols.
• Load Balancing & DNS
• Operate F5 load balancers and manage DNS services (Infoblox, Cisco DNS).
• Configure and manage Azure and AWS networking components (VPN, Gateway, NSG, routing).
• Monitor network performance and integrity using tools such as Logic Monitor and Live Action. 
• Resolve escalated issues across cloud and on‑prem infrastructure.
• Automate routine tasks with PowerShell, Python, or Perl; monitor automation effectiveness.
• Mentor team members on technical issues. 
• Maintain comprehensive technical documentation and network diagrams.
• Identify and recommend enhancements to network performance, capacity, and scalability.

Qualifications

• Bachelor’s degree in computer science, Information Systems, or related field (or equivalent experience).
• 8+ years in senior network engineering or administration roles.
• CCNP, CCDP, CCIE, or equivalent professional certification preferred.
• LAN/WLAN/WAN design and deployment
• Cisco IOS, Palo Alto, Fortinet, F5, Infoblox, Azure, AWS
• Routing protocols (BGP, OSPF)
• Firewall and security best practices
• PowerShell, Python, Perl scripting
• Logic Monitor, Live Action, and other monitoring tools
• Linux OS for network appliance support
• Advanced knowledge of Linux OS for appliance support
• VMware, Hyper‑V, and storage environments.
• Strong verbal and written communication; ability to mentor and collaborate across teams.
• Experience with datacenter build and virtualization. 
• Familiarity with access control models and network security frameworks.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Operations Projects, Scheduler.

General Description:

The Operations Projects, Scheduler reports to the Shutdown Turnaround Outage (STO) Director and is responsible for managing the STO scheduling processes of  work at Venture Global Calcasieu Pass Liquefied Natural Gas (CPLNG) facility. The Operations Projects, Scheduler will require interface and work in collaboration, but not limited to, with Operations, Maintenance (Planning and Execution), Engineering, Warranty, Project Departments.

Responsibilities:

• Strict adherance to VGLNG business controls, approved contracts/suppliers.
• Schedule STO work according to Venture Global HSSE process and procedures, in order to prevent or mitigate exposures to unsafe STO work conditions or SIMOPS.
• Schedule STO work according to VGIMS (Venture Global Integrity Management System), VGLNG Work Management and STO Management process and procedures.
• Develop and maintain short, medium and long term STO schedules and act VGLNG STO gatekeeper.
• Develop resource loaded schedules to a safe, efficient and effective capacity level.
• Work with STO Planners for the development of ROM cost estimates, following AACE 18R-97 Cost estimate classification system.
• Analyze Critical Path Method (CPM) and Earned Value functionality. Produces analytical reports such as Resource Histograms, S-Curves, including analysis of deviations, variations and trends.
• Identifies STO schedule risks on time, cost, scope, and provide recommendations for corrective and improvement actions.
• Monitor progress against and established STO schedule baselines. Updates, coordinates and communicate schedule risk, changes to all active parties and including third party contractors or vendors as required.
• Development, implementation and utilization of STO Planning & Scheduling best practices. Act as SME for continuous improvement.

Qualifications:

• High school diploma or GED minimum. Technical degree, PMP certification – or similar is a plus.
• Minimum three (3+) years work experience as routine maintenance scheduler and three (3+) years as Turnaround Scheduler, in Oil and Gas, LNG or petrochemical facilities.
• In-depth Primavera Project Management P6 experience. (3+) years experience required is a must.
• Proficient at SAP Plant Maintenance and Prometheus as “End User” level.
• Familiar with AACE 18R-97 Cost estimate classification system.
• Strong experience level using Microsoft Office Suite.
• Knowledge and experience in the different cycles of Turnaround and project controls and best practices.
• Project Management PMP training or certification is a plus.
• MS Project experience is a plus.
• Experience in commissioning, startup, and maintenance of Oil & Gas or petrochemical facilities is a plus
• Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing status

Skills:

• Strong leadership and organizational skills.
• Strong planning and scheduling skills, able to manage multiple activities with a high degree of accuracy.
• Exceptional problem solving and analytical skills. Able to adapt and work in a fluid work environment which expects high level of customer services, confidentiality and ethical behavior.
• Capable to set high standards and promote continuous improvements initiatives.
• Possess the personality and ability to relate to and to establish a mutually respectful relationship with management, peers and the various facility level workers whom are all responsible for ensuring good operations.
• Holds personal accountability for own performance and behavior.
• Provides mentoring and coaching to junior peers and counterparts.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

This role reports to the Sr. Manager of Plant Technology and Telecoms Systems Integration.

The successful candidate will be self-motivated and shall have direct knowledge and experience with Network and Server Infrastructure, Firewalls, Industrial Control Systems, Industrial Networks, and associate software applications.  Additional knowledge of TSI systems (i.e.: PAGA, CCTV, and ACS) is a plus.

This position will be a main contributor to ensuring LNG PT systems are ready for operations and deployed per specification(s). The PT Administrator is also responsible for working closely with the VG Project Management Team and providing timely reporting to VG Leadership.

Responsibilities:

• On-site presence in Cameron, LA with availability to travel to current and future VG LNG Sites or Corporate Locations as needed
• Work closely with the Sr. Manager of PT and Telecoms Systems Integration
• Work with EPC and TSI vendors to ensure systems are being deployed and function as designed
• Actively participate in break/fix activities related to PT and TSI systems
• Actively participate in installation and upgrade activities related to PT and TSI systems
• Coordinate and interface with onsite IT as needed
• Support site PT construction, installation, and commissioning activities
• Support active operations within the context of PT
• Recommend options to reduce or maintain costs in PT Infrastructure hardware, software, and deployment

Qualifications:

• Bachelor’s degree in information technology or related technical field
• 5 years’ hands-on experience in PT systems on premise and software domains
• Excellent documentation skills
• Proficient in at least 3 of the following domains with demonstrated accomplishments (PAGA, CCTV, Access Control, Firewalls, L3 Networking, Server Infrastructure, Visualization, Data Aggregation)
• Demonstrated technical, analytical, and troubleshooting skills
• Understanding of project management methodologies as it pertains to this role
• Excellent communication and interpersonal skills

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite