Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

This role reports to the Director, Operations Engineering and will be responsible for developing and progressing the Ready for Operations (RFO) activities, ensuring seamless transition of the facility from EPC to the operations phase.

The successful candidate shall possess in-depth understanding on drivers such as turbines (gas & steam) and motors, and driven equipment such as generators, compressors and pumps. The incumbent shall also be familiar with associated supporting components/systems such as, couplings, bearings, lubrication and sealing systems (dry gas seals and mechanical seals). Working knowledge in compressor performance and vibration analysis is key in successful performance of this job.

Additionally, this individual shall provide, as a minimum, intermediate level Reliability Engineering support to the Operations team with focus in the following areas:

• Root Cause Failure Analysis (RCFA): With expertise in relevant techniques to adequately lead RCFA exercises for failures relating to plant equipment and/or processes.
• Reliability Centered Maintenance (RCM): With adequate knowledge in relevant techniques to drive fine-tuning & improvements in existing Maintenance practices to achieve a cost-effective, yet safe robust Maintenance strategy.

The incumbent is also expected to provide guidance and mentorship to less experienced staff associated with maintaining and operating plant equipment, to ensure the highest level of asset availability.

Responsibilities:

• Will provide advice and guidance on Rotating Equipment system engineering issues.
• Provide daily-to-day Rotating Equipment and Mechanical systems support to the Maintenance & Operations teams to ensure continued operability of plant equipment.
  • Providing advanced diagnostic support, to allow rapid production recovery, in the event of equipment failure and forced plant outage.
  • Provide Root Cause Failure Analysis (RCFA) leadership during RCFA exercises.
    • This include the ability to wrap up summaries (with causes and recommendations) and present to concerned parties.
  • Provide interpretation and evaluation services to analysis and recommendations from the Reliability Technicians on predictive programs.
  • Provide support to the Maintenance team for Turnaround planning and execution.
  • Supports availability tracking and improving the overall reliability for plant equipment and Responsible for evaluating the workflow process, identification of critical spares, spare parts storage and preservation requirements for Rotating Equipment systems throughout the plant.
  • Reliability Centered Maintenance (RCM): Lead initiatives to drive fine-tuning & improvements in existing Maintenance practices to achieve a cost-effective. 

Qualifications:

• Education and Certifications: 
  • Minimum Bachelor’s degree in Engineering or other relevant technical discipline is required
  • Mechanical Engineering focus is preferred. 
  • A Professional Engineering License is preferred.

• Experience: 
  • A minimum of Fifteen (15) years’ experience working in an engineering capacity, with Rotating and Mechanical equipment in an industrial setting in engineering or operations
  • Oil and Gas experience is required, with preference in LNG applications, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable.
    • Extensive knowledge of gas turbines (Frames & Aero-derivatives) and compressors (including compressor performance) is required 

• Additional Skills:
  • Knowledge of CMMS Systems
  • RCFA tools for conducting failure analysis

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking an Associate/Graduate Reliability & Integrity Engineer to join our team in the Calcasieu Pass Facility in Louisiana.

This incumbent will report to the Principal Reliability & Integrity Engineer and will be supporting Operations, Maintenance and Engineering groups for matters relating to the plant asset integrity program.

This role will be part of the team responsible administering the plant asset integrity management program, ensuring plant operations remain program compliant and with safe, reliable and cost effective. 

The successful candidate shall be a technical generalist, preferably with good working knowledge of gas processing plant equipment such as general machinery, piping, pressure vessels, heat exchangers, storage tanks, instrumentations and safety equipment.

The incumbent shall also be knowledgeable of industry associated specifications, codes and standards (API, ASME, NACE, ANSI & ISO) and have good understanding of Condition Monitoring & Risk-Based management concepts.

 Job Role Responsibilities:

Candidate will develop knowledge and understanding of the Venture Global Asset Integrity Management program and will be assigned tasks, including but not limited to:  

• Fixed equipment mechanical integrity initiatives:
• Management of API inspections and follow-up activities
• Support Risk Based Inspection (RBI) activities
•  
• Rotating equipment reliability improvement initiatives:
• Review and continuous improvement of Preventive & Predictive Maintenance equipment routines
• Support efforts for transition to Reliability Centered Maintenance
• Support development of “bad actor” list 
• Develop competency for engineering software tools and databases utilized for asset integrity initiatives (e.g. PCMS, FFS analysis, vibration analysis)
• Stay current with technology developments regarding equipment integrity management
• Support additional integrity initiatives as needed (e.g. pipelines, marine facility)
• Support with the Management of Change (MOC) process
• Support Process Hazard Analysis (PHA) risk assessments
• Support Root Cause Failure Analysis (RCFA) process
• Support development and tracking of appropriate Key Performance Indicators
• Provide day-to-day troubleshooting support to Operations Groups

Education, Experience and Qualifications:

• Bachelor’s degree in Engineering discipline (e.g. Chemical, Mechanical, Metallurgy, Welding).
• Familiarity with Microsoft Office 365 Application Suite
• Familiarity with ASME, API and NACE/AMPP recommended practices

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Operations Project Coordinator (EI&C)

Location: Venture Global Calcasieu Pass Liquefied Natural Gas (CLNG) facility in Cameron, Louisiana

General Description:

The Operations Project Coordinator (E, I&C) reports to the Shutdown Turnaround Outage (STO) Director and is responsible for managing the STO E, I&C work at Venture Global Plaquemines Liquefied Natural Gas (PLNG) facility. The Operations Project Coordinator position primarily coordinates and directs the safe execution of the Turnaround E, I&C works and will be required to interface and work in collaboration with Turnaround Contractors, Operations, Maintenance (Planning and Execution), Engineering, Warranty, Project Departments among others.

 Responsibilities:

• Manages and Coordinates E, I&C Turnaround work execution according to Venture Global HSSE process and procedures, to prevent or mitigate exposures to unsafe Turnaround work conditions or SIMOPS.
• Manages and Coordinates E, I&C Turnaround work execution according to VGIMS (Venture Global Integrity Management System), VGLNG Work Management and STO Management process and procedures.
• Responsible in meeting VG STO Gate process deliverables under his area of responsibility.
• Facilitates the Turnaround scope of work workshops under his area of responsibility, ensures works are captured in SAP, STO Revisions and STO IDs.
• Serves as SME and supports Turnaround Planners for the development of execution work packs under his area of responsibility. Support the identification of risks on time, cost, scope, and provides recommendations for corrective and improvement actions.
• Works with Turnaround Scheduler for the development of schedules under his area of responsibility and supports Critical Path Method (CPM) analysis.
• Works with Turnaround Logistic Coordinator for logistics, tools, equipment certifications/mobilization under the area of his responsibility.
• Adheres to VGLNG Business controls, approved contracts/suppliers.
• Participates in Turnaround contractor selection process. 
• Facilitates reviews of Contractor work scope and schedule inputs
• Controls Contractor timesheets.
• Manages interfaces between Contractors, third parties and VG.
• Monitors all phases of contractor work progress against established schedule baselines. 
• Communicates progress and schedule risk changes to all active parties 
• Contributes to continuous improvement/Lesson learned program.

Qualifications

• Minimum a high school diploma or GED. Technical degree, PMP certification – or similar is a plus. Electrical trade experience is an asset

Experience

• Minimum three (3+) years’ work experience as E, I&C routine maintenance Execution Lead or Supervisor and three (3+) years as E,I&C Turnaround Coordinator in Oil and Gas, LNG or petrochemical facilities.
• Strong knowledge in DCS Systems (Yokogawa is a plus), GE Mark VI and Field Instrumentation.
• Knowledge and experience in the different cycles of Turnaround and project controls and best practices. 
• Experience level using Microsoft Office Suite.
• Knowledgeable in SAP Plant Maintenance as “End User” level.
• Familiar with Primavera Project Management P6, MS Project experience is a plus.
• Experience in commissioning, startup, and maintenance of Oil & Gas or petrochemical facilities is a plus
• Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing status

Skills

• Strong Leadership and Organizational skills.
• Strong planning and scheduling skills, able to manage multiple activities with a high degree of accuracy.  
• Exceptional problem solving and analytical skills. Able to adapt and work in a fluid work environment which expects high level of customer services, confidentiality, and ethical behavior.
• Capable to set high standards and promote continuous improvements initiatives.
• Team oriented, with ability to function effectively as part of a diverse group.
• Provides mentoring and coaching to junior peers and counterparts.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate based on race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Operations Projects Coordinator, Mechanical

Location: Venture Global Calcasieu Parish Liquefied Natural Gas (CLNG) facility in Cameron, Louisiana

General Description: 

The Operations Projects Coordinator, Mechanical reports to the Shutdown Turnaround Outage (STO) Director and is responsible for managing the STO Mechanical work at Venture Global Calcasieu Pass Liquefied Natural Gas (CLNG) facility. The Operations Projects Coordinator, Mechanical  primarily coordinates and directs the safe execution of the Turnaround Mechanical works and will be required to interface and work in collaboration with Turnaround Contractors, Operations, Maintenance (Planning and Execution), Engineering, Procurement, Warranty, Project Departments among others. 

Responsibilities: 

• Manages and Coordinates Mechanical Turnaround work execution according to Venture Global HSSE process and procedures, to prevent or mitigate exposures to unsafe work conditions or SIMOPS.
• Manages and Coordinates Mechanical Turnaround work execution according to VGIMS (Venture Global Integrity Management System), VGLNG Work Management and STO Management process and procedures.
• Responsible in meeting VG STO Gate process deliverables under his area of responsibility.
• Assures compliance with and communication of all conditions inherent to Management of Change within the operating facility.
• Assists with coordination of daily schedule change and progress meetings, specifically assuring availability of essential stakeholders
• Facilitates the Turnaround scope of work workshops under his area of responsibility, ensures works are captured in SAP, STO Revisions and STO IDs.
• Serves as SME and supports Turnaround Planners for the development of execution work packs under his area of responsibility. Support the identification of risks on time, cost, scope, and provides recommendations for corrective and improvement actions.
• Work with Turnaround Scheduler for the development of schedules under his area of responsibility and supports Critical Path Method (CPM)
• Works with Turnaround Logistic Coordinator for logistics, tools, equipment certifications/mobilization as required. 
• Strict adherence to VGLNG Business controls, approved contracts/suppliers.
• Participates in Turnaround contractor selection process, once the Contractor is onboard facilitated contractor’s work scope reviews and schedules and once in Execution controls Contractor timesheets.
• Serves as “conflict resolution” interface between Contractors, Third parties and VG.
• Monitors Pre-Execution and Post turnaround work progress against established schedule baselines. Updates, coordinates and communicate progress and schedule risk changes to all active parties and including third party contractors or vendors as required.
• Act as SME for continuous improvement/Lesson learned.

Qualifications 

• Minimum a high school diploma or GED. Technical degree, Mechanical Trade or PMP certification – or similar is a plus.

Experience 

• Minimum three (3+) years’ work experience as Mechanical routine maintenance Execution Lead or Supervisor and three (3+) years as Mechanical Turnaround Coordinator in Oil and Gas, LNG or petrochemical facilities.  
• Knowledge and experience in the different cycles of Turnaround and project controls and best practices. 
• Experience using Microsoft Office Suite.
• Knowledgeable in SAP Plant Maintenance as “End User” level.
• Project Management PMP training or certification is a plus.
• Familiar with Primavera Project Management P6, MS Project experience is a plus.
• Experience in commissioning, startup, and maintenance of Oil & Gas or petrochemical facilities is preferred.
• Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing 

Skills 

• Strong Leadership and Organizational skills.
• Strong planning and scheduling skills, able to manage multiple activities with a high degree of accuracy. 
• Exceptional problem solving and analytical skills. Able to adapt and work in a fluid work environment which expects high level of customer services, confidentiality, and ethical behavior.
• Able to apply a strong comprehension of construction strategy, logic and best practices through open two-way communication with stakeholders
• Capable to set high standards and promote continuous improvements
• Possess the personality and ability to relate to and to establish a mutually respectful relationship with management, peers and the various facility level workers who are all responsible for ensuring good operations.
• Holds personal accountability for own performance and behavior.
• Provides mentoring and coaching to junior peers and counterparts. 

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Operations Projects, Planner. The Operations Projects, Planner reports to our Operations team and is responsible for developing, maintaining and communicating projects schedules. The position can be assigned to one or multiple facilities as well as specific initiatives for business studies or process development responsibilities. This position is located in Cameron, LA.

 Responsibilities:

• Lead planning exercises, prepare, and maintain project schedules for Operations
• Ensure the appropriate level of planning and scheduling functionality is applied to support project controls activities
• Assists operations team in resolution of issues involving cost, schedule, and changes
• Establishes and maintains a standard reporting format for management reports
• Review schedules to ensure that the appropriate level of details and structure are applied and effective progress monitoring
• Ensure schedules generated for a project are fully integrated and resource-loaded in order to ensure accuracy
• Ensure compliance of industry procedures and practices
• Set up, implement, and maintain schedule related key performance indicators (KPIs)
• Obtains data on progress, logic, and manpower from operations/plant personnel
• Conduct schedule review meetings and assist in developing alternatives to accommodate changes to operational plans and communicate any deviations of current plan

Qualifications:

• Bachelor's Degree (Engineering discipline preferred) or equivalent experience in LNG project engineering and/or construction industry
• 3+ years of experience 
• Demonstrated success in proactively improving processes and systems
• Exceptional written, verbal and interpersonal communication skills
• Ability to communicate effectively at all levels of an organization and with individuals and groups from different disciplines, industries and governmental agencies.
• Organized, planning skills, able to manage multiple activities and programs in timely fashion and with a high degree of accuracy, able to meet work deadlines
• Exceptional problem solving and analytical skills 
• Computer knowledge including Microsoft Office Suite including Word, Excel, Access, Project and PowerPoint
• Specific expertise with Microsoft Project

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Operations Projects, Projects Lead

Location: Venture Global Calcasieu Pass (CLNG) facility in Cameron, Louisiana

General Description: 

The Operations Projects, Projects Lead reports to the Shutdown Turnaround Outage (STO) Director and is responsible for managing the Execution Resources required to complete Operations Project work at Venture Global Plaquemines Liquefied Natural Gas (PLNG) facility. The Operations Projects, Lead is responsible for the oversight of all traditional Owner-side Construction Management functions; Directing all Brown-field contracts executed under a self-directed model (Scaffold, Insulation, heavy lift, single discipline Specialty Works, Vendor site support), and providing Owner field administration for all General Contracts. Focal points for the position will be:

• An incident free environment, wherever Project works are carried out
• An open and supportive culture in the field, encouraging input, collaboration, and intervention.
•  Contractor compliance with all Facility, Design, and Regulatory Specifications and Standards 
• Efficient Contractor performance relative to cost and schedule
• Establishment and ownership of field communication workflows such as RFI, FWI, NCR, FCN, etc. which predominantly involve Contractors
• Ownership of effectiveness of field communication workflows involving Facility Operations such as MOC, Permit Processes, PSSRs etc.
• Clarity of technical communications to and from field contractors

Responsibilities: 

• Manages Operations Project work execution according to Venture Global HSSE process and procedures, to prevent or mitigate exposures to unsafe work conditions or SIMOPS.
• Manages Operations Project work execution according to VGIMS (Venture Global Integrity Management System), VGLNG Work Management and STO Management process and procedures.
• Responsible in meeting VG STO Gate process deliverables under his area of responsibility.
• Assures field communication of all conditions inherent to Management of Change within the operating facility.
• Oversees contractor participation in the evolution of all execution schedules
• Provides Subject Matter Expertise in the evolution of Construction schedule Logic, Test Plans and Site Safety Programs
• Provides expert level contractor support for all special permit requirements (such as Line Breaks, Ground Breaks, Confined Space Entries, Critical Lifts, Critical System Defeats, Leading Edge/Work at Heights, and Positive entry control, etc.) which are very common in Turnarounds
• Assures communication of all contactor ITPs, test notifications, and dossiers
• Supervises coordination of daily schedule change and progress meetings, specifically assuring availability of essential stakeholders
• Expedites the close out of field RFI and NCR
• Expedites Contractor inputs to budget impacts caused by field change
• Oversees Operations Project scope of work workshops under his area of responsibility.
• Strictly adherence to VGLNG Business controls, assuring approved contracts/suppliers execute the field work represented in their contract.
• Participates in contractor selection process
• Participates in Contractor scope and schedule reviews
• Endorses Contractor Timesheets
• Continually audits Contractor field progress
• Maintain a continuous awareness of ongoing contractor activities on all project work fronts.
• Conducts multiple daily field surveys at all active work fronts
• Regularly attends ‘Toolbox Talks’, offering expert input
• Serves as “conflict resolution” interface between Contractors, Third parties and VG.
• Communicates all field generated risk to Safety, Quality, Schedule and Cost
• Act as SME for continuous improvement/Lesson learned regarding field performance.

Qualifications 

• Minimum a high school diploma or GED. Technical degree, Mechanical Trade or PMP certification – or similar is a plus.

Experience 

• Minimum 10 (10+) years’ work experience in Construction Management (as Superintendent, Manager or Lead) in Oil and Gas, LNG or petrochemical facilities.  
• Knowledge and experience in the different aspects of Greenfield Safety, Scheduling and communications. 
• Experience using Microsoft Office Suite.
• Knowledgeable in SAP Plant Maintenance as “End User” level.
• Project Management PMP training or certification is a plus.
• Familiar with Primavera Project Management P6, MS Project experience is a plus.
• Experience in commissioning, startup, and maintenance of Oil & Gas or petrochemical facilities is preferred.
• Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing 

Skills 

• Strong Leadership and Organizational skills.
• The ability to constantly provide solutions based on logic backed by extensive personal and technical experience
• Must be an extremely effective communicator
• Must relate to people and present multiple effective motivational options
• Strong safety, schedule and quality awareness
• Able to manage multiple activities with a high degree of efficiency and accuracy. 
• Exceptional problem solving and analytical skills. Able to adapt and work in a fluid work environment which expects high level of customer services, confidentiality, and ethical behavior.
• Able to apply a strong comprehension of construction strategy, logic and best practices through open two-way communication with stakeholders
• Capable to set high standards and promote continuous improvements
• Possess the personality and ability to relate to and to establish a mutually respectful relationship with management, peers and the various facility level workers who are all responsible for ensuring good operations.
• Holds personal accountability for the performance and behavior of the field team.
• Provides mentoring and coaching to junior peers and counterparts. 

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Technician, Laboratory to join our team at the CP2 LNG Facility that is in Cameron, Louisiana. Successful candidate may be required to train at any of the other Venture Global facilities for a duration of 3-6 months.

This role reports to the Laboratory Supervisor and will be responsible for progressing the Ready for Operations (RFO) activities, ensuring seamless transition of the facility from EPC to the operations phase. This entails assisting with commissioning activities of lab equipment and instrumentation, in validating procedures and work instructions for testing, analysis reporting and chemicals management.

The incumbent will be responsible for conducting the analysis of samples for a typical LNG plant, analysis of which shall include, but not necessarily be limited to:

• Natural Gas Composition, and impurities testing.
• LNG composition (Before and after treatment)
• Refrigerant composition
• Dewpoint (Natural Gas & other gases)
• Utility Water (produced, waste, cooling)
• Testing of other plant utilities
• Amine testing
• Environmental Waste Streams
• Cargo Certificates of Analysis

The incumbent shall also be familiar with sampling procedures and associated laboratory equipment to perform analysis of the above components.

Responsibilities:

• Operate laboratory equipment in a safe, reliable, and operationally responsible manner.
• Test and analyze the above-mentioned sample types, record lab results and generate summary reports using application software’s, and lab data repositories.
• Run daily quality control checks on applicable instrumentation following GPA, ASTM, and applicable ISO standards
• Operate laboratory equipment to perform required analysis, trouble shoot equipment difficulties and initiate minor repairs
• Basic inventory management of laboratory supplies and parts
• Execute daily laboratory tasks and requests in a timely manner with high degree of accuracy and efficiency
• Collaborate with other laboratory technicians, and supervisory staff on activities

Qualifications:

• Education and Certifications: Degree in Science, Chemistry or equivalent preferred.
• A minimum of two (2) year experience working in a hydrocarbon laboratory (May be substituted with education or relevant LNG experience)
• Oil and Gas experience is preferred, with preference in LNG applications, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable.
• Knowledge of basic laboratory equipment, including Gas Chromatograph, DewPoint meters, sample cylinders, regulators, valves, balances, etc.
• Analytical skills in quality testing using gas chromatography
• Proficient with MS Office Suite

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. 

Location: Venture Global Plaquemines Liquefied Natural Gas (PLNG) facility in Cameron, Louisiana.

General Description: 

The Operations Project, Scheduler reports to the Shutdown Turnaround Outage (STO) Director and is responsible for managing the STO scheduling processes of work at Venture Global Calcasieu Pass Liquefied Natural Gas (CPLNG) facility. The scheduler position will require interface and work in collaboration, but not limited to, Operations, Maintenance (Planning and Execution), Engineering, Warranty, Project Departments. 

Responsibilities: 

• Strict adherence to VGLNG business controls, approved contracts/suppliers.
• Schedule STO work according to Venture Global HSSE process and procedures, to prevent or mitigate exposures to unsafe STO work conditions or SIMOPS.
• Schedule STO work according to VGIMS (Venture Global Integrity Management System), VGLNG Work Management and STO Management process and procedures.
• Develop and maintain short, medium and long term STO schedules and act as a VGLNG STO gate.
• Develop resource loaded schedules to a safe, efficient and effective capacity.
• Work with STO Planners for the development of ROM cost estimates, following AACE 18R-97 Cost estimate classification system.
• Analyze Critical Path Method (CPM) and Earned Value functionality. Produces analytical reports such as Resources Histograms, S-Curves. including analysis of deviations, variations and trends.
• Identifies STO schedule risks on time, cost, scope, and provides recommendations for corrective and improvement actions.
• Monitor progress against and establish STO schedule baselines. Updates, coordinates and communicate schedule risk, changes to all active parties and including third party contractors or vendors as required.
• Development, implementation and utilization of STO Planning & Scheduling best practices. Act as SME for continuous improvement.

 Qualifications 

• Minimum a high school diploma or GED. Technical degree, PMP certification – or similar is a plus.

Experience 

• Minimum three (3+) years' work experience as routine maintenance scheduler and three (3+) years as Turnaround Scheduler, in Oil and Gas, LNG or petrochemical facilities.  
• In-depth Primavera Project Management P6 (3+) years' experience required) is a must.
• Proficient at SAP Plant Maintenance and Prometheus as “End User” level.
• Familiar with AACE 18R-97 Cost estimate classification system.
• Strong experience level using Microsoft Office Suite.
• Knowledge and experience in the different cycles of Turnaround and project controls and best practices. 
• Project Management PMP training or certification is a plus.
• MS Project experience is a plus.
• Experience in commissioning, startup, and maintenance of Oil & Gas or petrochemical facilities is a plus.
• Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing status.

Skills 

• Strong leadership and organizational skills.
• Strong planning and scheduling skills, able to manage multiple activities with a high degree of accuracy. 
• Exceptional problem solving and analytical skills. Able to adapt and work in a fluid work environment which expects high level of customer services, confidentiality and ethical behavior.
• Capable of setting high standards and promoting continuous improvements
• Possess the personality and ability to relate to and to establish a mutually respectful relationship with management, peers and the various facility level workers who are all responsible for ensuring good operations.
• Holds personal accountability for own performance and behavior.
• Provides mentoring and coaching to junior peers and counterparts. 

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate based on race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Senior Laboratory Technician to join our team at the CP2 LNG Facility in Cameron, LA. Successful candidate may be required to train at any of the other Venture Global facilities for a duration of 3-6 months.

This role reports to the Laboratory Supervisor and will be responsible for ensuring the smooth operation of the lab within the existing procedures and applications. The role must also be able to advise, assist, and audit established procedures, assist with instrument and equipment commissioning, make recommendations, and assist in troubleshooting equipment, and instruments. The role also entails training of lab technicians following existing procedures on sampling, testing, analysis, reporting and chemicals management.

The incumbent will be responsible for conducting the analysis of samples for a typical LNG plant, analysis of which shall include, but not necessarily be limited to:

• Natural Gas Composition, and impurities testing.
• LNG composition (Before & after treatment)
• Refrigerant composition
• Dewpoint (Natural Gas & other gases)
• Utility Water (produced, waste, cooling)
• Testing of other plant utilities
• Amine solution
• Environmental Waste Streams
• Natural Gas Liquids (NGL, condensate)
• Oil (condition - viscosity, particles, ferrographic)
• Coordinate third party analysis as needed
• Cargo Certificates of Analysis
• Coordinating sampling & testing of external samples

The incumbent shall also be highly familiar with sampling procedures and associated laboratory equipment to perform analysis of the above components. The candidate should have experience with oil & gas industry standards (ISO, GPA, ASTM, UOP etc.) and their applicability within the LNG industry.

Responsibilities:

• Collect samples as required including but not limited to: Vaporized LNG, High Pressure feed gasses, mixed phase liquids, Refrigerants, Amine, Demineralized Water, and other utility samples.
• Login and receive samples to test and analyze the above-mentioned components, record lab results, and generate summary reports
• Discuss out of specification results with operations and engineering for approvals
• Operate laboratory equipment to perform required analysis, trouble shoot equipment difficulties and initiate minor repairs
• Coordinate repairs, preventative maintenance on all laboratory application (scheduled & non-scheduled)
• Inventory management of laboratory supplies and parts
• Execute daily laboratory tasks and requests in a timely manner with high degree of accuracy and efficiency
• Maintain a maintenance and calibration program to ensure all analytical equipment are in top condition
• Collaborate with other laboratory technicians, and supervision on activities
• Maintain lab equipment readiness by performing daily Quality Control Standards (QCs) and keeping detailed records of all QC data in compliance with the Quality Management System (QMS)

Qualifications:

• Education and Certifications: Bachelor of Science in Biology, Chemistry, or related field (preferred), with at least four (4) years of relevant laboratory experience. 
• Experience can be substituted for education, (with preference given for recent LNG experience). 
• Oil and Gas experience is required, with preference in LNG applications, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable.
• Extensive knowledge of sampling and laboratory equipment is required, including troubleshooting
• Analytical skills in quality testing using gas chromatography, ion chromatography, and colorimetric methods.
• Mechanically inclined to troubleshoot common problems that may occur in an industrial laboratory setting including locating gas leaks, injection issues, or repairing damaged sample cylinders as needed.
• Exceptional communication skills with the ability to translate technical data to different audiences from different disciplines, industries, or government agencies
• The ability to work independently and as a team
• Proficient with MS Office Suite

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Operations Project, Project Manager. This is a Full-time role in Cameron, LA.

General Description (includes but is not limited to the following, other duties may be assigned):

The Operations Project, Manager is responsible for planning, coordinating, executing, communicating, and closing complex, integrated Turnaround outages. This position must be familiar with work performed during outages, including, but not limited to gas turbines, pretreatment facilities, licensed liquefaction units, multiple complex projects, instrumentation and controls upgrades, complex balance of an operating facility and other designated work scopes. The Outage Manager leads a matrix team of internal and external resources to develop a logically integrated outage schedule, then supports successful completion of outage work safely, on schedule and on budget. Develops and monitors the outage schedule, communicates outage status and exceptions, tracks scope changes during the outage, also tracks and communicates outage risks. The outages managed by the Outage Manager use the Venture Global Outage Management Procedure to provide consistent planning, execution, and closure of complex integrated outages that ensure safe, operational reliability and efficiency. Provide outage leadership to both internal and external organizations and entities.

Job Responsibilities:

• In-depth and broad, extensive knowledge of outage management industry best practices.
• Highly skilled professional with wide-ranging, advanced LNG technical experience to resolve complex issues.
• Competent to work at very high level in multiple knowledge areas and functions as an advanced contributor.
• Ability to make decisions on complex issues regarding integration of project turnaround components and advanced tasks on overall outage.
• Lead the integration of internal and external resources, identifies opportunities to develop integrate processes, tools, services and techniques within the operational facility.
• Plans and leads complex integrated plant outages.
• Ability to use independent judgment requiring in-depth evaluation of variable factors including risk, safety, cost, and schedule.
• Independently selects methods, techniques, analytical approach and evaluation criteria. Determines methods and procedures for new assignments.
• Serves as project/technical lead on medium to large outage projects; regularly coordinates work of professionals, technicians and others outside of own department.
• Train and mentor employees on technical skills.
• Collaborate and solve problems – works with others to resolve significant issues, clarify or interpret complex information, provide initial screening/negotiations.
• Leads matrix organization teams

The position is a key position in the Operations Projects Group and will build, support and develop strong working relationships within the group, other corporate stakeholders, and associated construction contractors, vendors, suppliers, etc. It is an essential role in delivering operations project success and meeting expectations and requirements. Additionally, driving a strong safety culture, environmental stewardship and operational excellence, while delivering a safe and operable plant and maintaining a license to operate will underpin this leadership position.

This role will be based out of Cameron, LA with regular frequent business trips to operations facilities, project locations, contractors, vendors, suppliers, etc.

Qualifications

• Bachelor’s Degree or equivalent in business or engineering
• 10 or more years in area of specialization with in-depth experience across knowledge areas and multiple functions including LNG project outage management and plant maintenance and/or operations
• Highly skilled professional with wide-ranging, LNG advanced technical experience to resolve complex issues
• Competent to work at very high level in multiple knowledge areas and functions as an advanced contributor

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.  

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Senior Engineer, Electrical to join our Calcasieu Pass Facility Team in Louisiana.

This role reports to the Director, Operations Engineering and will be responsible for supporting the development and progressing the Ready for Operations (RFO) activities, ensuring a seamless transition of the facility from EPC to the operations phase.

The successful candidate shall have technical expertise in the Electrical Engineering discipline with in-depth understanding on motors, transformers, switchgear and other electrical equipment. The incumbent shall also be familiar with associated industry standards, guidelines and codes.

A working knowledge of general plant equipment in the Oil & Gas industry is also key to the successful performance of this job.

Aside, the successful candidate shall exhibit excellent written and oral communication skills in English as the role is expected to produce coherent, high quality documents, be a self-starter and develop on conceptual ideas with minimal guidance.

The successful candidate shall provide, as a minimum, intermediate level Reliability Engineering support to the Operations team with focus in the following areas:

• Root Cause Failure Analysis (RCFA): With expertise in relevant techniques to adequately lead RCFA exercises for failures relating to plant equipment and/or processes.
• Reliability Centered Maintenance (RCM): With adequate knowledge in relevant techniques to drive fine-tuning & improvements in existing Maintenance practices to achieve a cost-effective, yet safe robust Maintenance strategy.

Responsibilities:

• Serves as a resident company Technical Expert, providing advice and guidance on Electrical system engineering issues.
• Provide day-to-day Electrical systems support to the Maintenance & Operations teams to ensure continued operability of plant equipment.
• Providing advanced diagnostic support, to allow rapid production recovery, in the event of equipment failure and forced plant outages.
• Provide Root Cause Failure Analysis (RCFA) leadership during RCFA exercises and provide technical summaries (with causes and recommendations) to concerned parties.
• Provide interpretation and evaluation services to analysis and recommendations from the Reliability Technicians on predictive programs.
• Support HAZOPs, LOPAs and other Process Hazard Analysis (PHA)
• Provide support to the Maintenance team for Turnaround planning and execution.
• Supports availability tracking and improving the overall reliability for plant equipment and Responsible for evaluating the workflow process, identification of critical spares, spare parts storage and preservation requirements for Electrical systems throughout the plant

Qualifications:

• Education and Certifications: 
• Minimum Bachelor’s degree in Electrical Engineering
• A Professional Engineering License is preferred.

• Experience: 
• A minimum of five to ten (5-10) years’ experience working in an engineering capacity, with Electrical equipment in an industrial setting in engineering or operations. Supervisory experience will be considered an asset
• Oil and Gas experience is required, with preference in LNG applications, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable.
• Extensive knowledge of motors, gas turbines (Frames & Aero-derivatives) and compressors is required

• Additional Skills:
• Knowledge of CMMS Systems
• Power system analysis
• RCFA tools for conducting failure analysis

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Principal Process Engineer to join our team in Cameron, LA.  This role reports to the Manager, Operations Engineering and will support the review of process design and operations engineering functions to meet the objectives of the project as delivered by the EPC and external consultants.

 Responsibilities:

• Support the development and progression of the Ready for Operations (RFO) schedule to transition the facility from EPC to the operations phase.
• Serve as the project focal points for all areas of process engineering to ensure that the project is executed according to agreed budgets, schedules, and design requirements.
• Responsible for process engineering deliverables to ensure they comply with the project design and operation philosophies.
• Prepare heat and material balance, process flow diagrams, piping, and instrumentation diagrams.
• Responsible for system design parameters, and design or rating of equipment such as heat exchangers, vessels, towers, etc. and provide technical guidance on complex design issues.
• Review and coordinate with licensors, vendors, and subcontractors to ensure proper and complete integration within the project plan.
• Development of process simulations for complex units, updates and modifies process simulation models.
• Process improvement studies, performance optimization, incident investigations, economic evaluations, technical audits, and safety studies.
• Support during construction to ensure site technical queries, non-conformances, concession requests are properly resolved.
• Evaluation of requests for deviations or exemptions to the established specifications and project standards.
• Perform economic evaluations of equipment alternatives with particular emphasis on availability and reliability projections and life cycle costs.

Qualifications:

• Bachelor’s degree in Chemical Engineering
• Professional Engineer’s (PE) License or equivalent CEng license is required. 
• Minimum of ten (12) years of experience as a Senior Process Engineer in the LNG industry.
• Exhibit excellent written and oral communication skills.
• Experience in all aspects of process engineering from conceptual design, economics, detailed engineering, and plant startup and troubleshooting.
• Commissioning, start-up, and performance testing at project sites is a plus.
• Strong understanding of key equipment involved in LNG liquefaction facilities.
• Possess effective computer skills; Microsoft Office software, and discipline specific software applications: HYSYS, Aspen Plus, etc.
• Skilled in the application of relevant major design codes and standards.
• Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing status.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a  to join our team in Cameron, LA at our Calcasieu facility in Louisiana.

This role reports to the Manager, Operations Engineering and will be responsible for supporting the development and progressing the Ready for Operations (RFO) activities, ensuring a seamless transition of the facility from EPC to the operations phase.

The successful candidate shall have  technical expertise in the Electrical Engineering discipline with in-depth understanding on motors, transformers, switchgear and other electrical equipment. The incumbent shall also be familiar with associated industry standards, guidelines and codes.

A working knowledge of  general plant equipment in the Oil & Gas industry is also key to the successful performance of this job.

Aside, the successful candidate shall exhibit excellent written and oral communication skills in English as the role is expected to produce coherent, high quality documents, be a self-starter and develop on conceptual ideas with minimal guidance.

The successful candidate shall provide, as a minimum, intermediate level Reliability Engineering support to the Operations team with focus in the following areas:

• Root Cause Failure Analysis (RCFA): With expertise in relevant techniques to adequately lead RCFA exercises for failures relating to plant equipment and/or processes.
• Reliability Centered Maintenance (RCM): With adequate knowledge in relevant techniques to drive fine-tuning & improvements in existing Maintenance practices to achieve a cost-effective, yet safe robust Maintenance strategy.

Responsibilities:

• Serves as a resident company Technical Expert, providing advice and guidance on Electrical system engineering issues.
• Provide day-to-day Electrical systems support to the Maintenance & Operations teams to ensure continued operability of plant equipment.
• Providing advanced diagnostic support, to allow rapid production recovery, in the event of equipment failure and forced plant outages.
• Provide Root Cause Failure Analysis (RCFA) leadership during RCFA exercises and provide technical summaries (with causes and recommendations) to concerned parties.
• Provide interpretation and evaluation services to analysis and recommendations from the Reliability Technicians on predictive programs.
• Provide support to the Maintenance team for Turnaround planning and execution.
• Supports availability tracking and improving the overall reliability for plant equipment and Responsible for evaluating the workflow process, identification of critical spares, spare parts storage and preservation requirements for Electrical systems throughout the plant

Qualifications:

• Education and Certifications: 
• Minimum Bachelor’s degree in Electrical Engineering
• A Professional Engineering License is preferred.

• Experience: 
• A minimum 12 years experience working in a senior engineering capacity, with Electrical equipment in an industrial setting in engineering or operations
• Oil and Gas experience is required, with preference in LNG applications, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable.
• Extensive knowledge of motors, gas turbines (Frames & Aero-derivatives) and compressors is required
• Experience with MV(1.38kV/416oV) and LV (480V) Switchgear and MCC's required
• Experience with HV (138V or above) systems and Gas insulated Switchgear (GIS) preferred

• Additional Skills:
• Knowledge of CMMS Systems
• Power system analysis
• RCFA tools for conducting failure analysis

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Process Engineer to join our team in Cameron, Louisiana to support the Calcasieu Pass Facility. This role reports to the Manager, Process Engineering, and will support the review of process design and operations engineering functions to meet the objectives of the project as delivered by the EPC and external consultants.

The successful candidate will have strong design understanding and operational expertise of key equipment involved in LNG liquefaction facilities with demonstrable experiences working with Feed Gas and Pre-Treatment systems, Liquefaction and Refrigeration Systems, HHC Management systems, Storage and Loading / BOG management Systems.

 Responsibilities:

• Support the development and progression of the Ready for Operations (RFO) schedule to transition the facility from EPC to the operations phase.
• Provide daily support to plant Production personnel in troubleshooting process issues and concerns by integrating fundamental principles of fluid flow, heat transfer, thermodynamics, and hydrocarbon process chemistry
• Support the development and utilize Process Monitoring tools that monitor process efficiency and make improvement recommendations to enhance production and efficiency performance.
• Develop comprehensive Operations and Engineering procedures to support new and enhanced as well as special operating modes of the CP facility
• Provide Process Engineering support for plant shutdowns/turnarounds
• Perform economic evaluations of equipment alternatives with emphasis on availability and reliability projections and life cycle costs.
• Support process improvement studies, performance optimization, incident investigations, economic evaluations, technical audits, and safety studies.
• Development of process simulations for process units, updates and modifies process simulation models.

Qualifications:

• Education and Certifications: 
• Minimum Bachelor's degree in Chemical Engineering
• Professional Engineer's (PE) License or equivalent CEng license is preferred.

• Experience: 
  • Possess effective computer skills; Microsoft Office software, and discipline specific software applications: HYSYS, Aspen Plus, etc.
  • Skilled in the application of relevant major design codes and standards.
  • Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing status
• A minimum of five (5) years’ experience working in an engineering capacity in an industrial setting in engineering or operations
• Oil and Gas experience is required, with preference in LNG applications, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable.
• Exhibit excellent written and oral communication skills.
• Experience in key aspects of process engineering from conceptual design, economics, detailed engineering, plant startup, operations, and troubleshooting.
• Commissioning, start-up, and performance testing at project sites is a plus.
• Strong understanding of key equipment involved in LNG liquefaction facilities.
• Additional Skills:

• Additional Skills:
• Possess effective computer skills; Microsoft Office software, and discipline specific software applications: HYSYS, Aspen Plus, etc.
• Skilled in the application of relevant major design codes and standards.
• Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing status.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking an Instrument and Control System Engineer to join our project team in Cameron, LA. 

The role will be part of the site engineering team responsible for ensuring that the Plant Instrumentation and Control Systems operate as per design, in a safe and reliable manner with minimal downtime.  

Responsibilities: 

• I&C MOC/HAZOP/RFI signoff
• Site I&C technical authority
• Ensure contractor adheres to project standards
• Assist PSSR close our and walk downs
• Assist I&C Design Manager as needed
• Participate in Site Acceptance Test.
• Review progress of assigned systems
• Review and approve temporary modifications to I&C equipment.
• Provide input to weekly site engineering report

Qualifications: 

• Bachelor’s degree in Electrical, Chemical, Electronics, or Computer Engineering, preferably with specialization in Process Control, Control systems, and Instrumentation.
• Minimum 10 year’s experience working with instrumentation and control systems.

Experience with:

• Plant Instrumented Control and Safety Systems (e.g. Distributed Control Systems (Mark VIe & Emerson), Safety Systems (Mark VIe, Emerson, HIMA), Fire and Gas Systems, and Programmable Logic Controllers (Allen Bradley, Siemens, Emerson/GE, etc.)
• Operational Technology Networks, Firewalls and Cyber Security
• Field Instrumentation for process measurement (e.g. Pressure, Temperature, Level, Flow, etc.)  Control Valves, Shutdown Valves (Air, Gas, and Motor Operated), Analyzers (H2S, Moisture, etc.) Gas Chromatographs, Flow Metering Systems (Ultrasonic, Coriolis, Differential Pressure, etc.) and their transmission systems (e.g. 4-20mA, Hart, ProfiBus, etc.)
• Alarm Management Systems including Management of Alarm databases and audits against Operating systems
• Experience in LNG liquefaction facilities highly preferred  

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a senior commissioning and start-up professional to join us as a Commissioning & Start Up Electrical specialist. The Venture Global Commissioning team is responsible to ensure the safe and efficient pre-commissioning, commissioning, start-up and operation of the facility to achieve the plant’s production and performance objectives.

This position will be located initially in Houston, TX and transitions to Cameron, LA. 

Key Responsibilities/Accountabilities:

• Responsible for the planning and implementation of the EMS on site including coordination, commissioning plans, testing, and signoff of all completed SAT reports.
• Willingness to develop technical knowledge and expertise on GE Power Conversion EMS System
• Communicate clearly and promptly up, down and across
• Communicate effectively to manage expectations and build relationships.
• Strong planning skills a distinct plus with the ability to adapt to changing site priorities as needed.
• Strong record keeping and coordination skills – drives discipline with EPC in this area.
• Site single point contact for liaison/interface between:

• • OFE (and OFE Vendors) and EPC site commissioning team
  • Site operations and maintenance teams
• Participate as electrical in Pre-Start-Up Safety Reviews (PSSR).
• Represent electrical commissioning in project punch listing activities.
• Implementation of SIMOPs.
• Assurance and audit of electrical test plans and commissioning procedures
• Lead and require strict adherence to Lock Out / Tag Out Procedures (LOTO), work permits, and company policies
• Review and spot check Job Hazard Analysis (JHA) audits for department
• Review scope packages and validate necessary forms for completed turnover package
• Review test procedures for component and system testing
• Perform project document reviews
• Support site Change Management for electrical discipline
• Checkout installed systems and equipment adhering to OEM requirements, system descriptions, and good industry standard practice

Basic Qualifications:

• Bachelor’s degree in Electrical from a University or Technical School, and/or job related experience and minimum of 10 years field execution experience
  OR
  Minimum 10-15 years of experience in LNG/Gas Process/Refinery/Petrochemical Industries and Power Plant maintenance and operations
• Minimum 10 years of electrical experience in supervisor roles and/or specialization
• Minimum 5 years of experience as Electrical Lead on mid to large scale project

• Working knowledge and experience with various control systems including PLCS, HMI, Relays, DCS Systems, & EMS System
• Familiarity with Control and Electrical systems as well as Ethernet network configurations and topology.
• MS Office Suite
• EPC experience
• Recent knowledge of engineering methods and possesses a technical knowledge of the detail design engineering process and electrical controls systems
• Must have knowledge of field-testing requirements and equipment to perform the testing
• Experienced with domestic and/or International electrical codes and standards. Including NEC, NFPA, NETA, and ANS

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite