We are seeking a motivated and mechanically inclined Waste / Ultra-Pure Water (UPW) Operations & Maintenance Technician Intern to support the operation and maintenance of critical water and wastewater systems within a semiconductor or mission-critical facility.

This role provides hands-on experience with advanced UPW generation, distribution, and wastewater treatment systems, while working alongside experienced technicians and engineers in a highly regulated, safety-focused environment.

Responsibilities:

• Support daily operations of UPW generation and distribution systems, including reverse osmosis (RO), electrodeionization (EDI), ion exchange, degasification, UV oxidation, and sub-micron filtration systems under supervision.
• Assist in operating and monitoring wastewater treatment systems, including neutralization systems, pH adjustment, chemical dosing, lift stations, equalization tanks, and biological processes (e.g., MBR/BNR where applicable).
• Perform routine rounds and system readings; record key parameters such as conductivity, resistivity, TOC, pH, flow rates, pressures, and tank levels, and escalate abnormal conditions.
• Assist with preventive and corrective maintenance on mechanical equipment including pumps, valves, filters, membranes, mixers, blowers, and chemical delivery systems.
• Support water quality monitoring and sampling activities to ensure compliance with process requirements and environmental discharge permits.
• Assist with chemical handling and dosing operations (acids, caustics, and treatment chemicals) in accordance with site safety procedures and SDS requirements.
• Support system flushing, regeneration, and sanitization of UPW systems, including resin beds, RO skids, and distribution loops.
• Assist in troubleshooting system issues such as membrane fouling, scaling, flow restrictions, pump failures, and instrumentation inaccuracies.
• Learn and apply safety procedures including lockout/tagout (LOTO), hazardous chemical handling, and confined space entry.
• Support startup and shutdown activities for UPW and wastewater systems, ensuring controlled and compliant operation.
• Assist in maintaining accurate CMMS documentation (e.g., Maximo), including work orders, calibration records, and maintenance logs.
• Observe and support vendor activities such as membrane cleaning, media replacement, and system performance testing.
• Participate in Environmental Health & Safety (EHS) programs, audits, and continuous improvement initiatives focused on safety, compliance, and water conservation.
• Develop an understanding of semiconductor water quality standards, contamination risks, and the critical nature of UPW systems for manufacturing operations.
• Any other duties or responsibilities that may be assigned to you in your role. 

Skills Required:

• Exposure to semiconductor, data center, pharmaceutical, or other mission-critical environments
• Basic knowledge of water/wastewater treatment processes (not required)
• Familiarity with CMMS systems (e.g., Maximo) is a plus
• Enrollment in or recent completion of a technical program (mechanical, environmental, or related field)
• Mechanically inclined with a strong interest in hands-on technical work
• Basic understanding of mechanical systems (pumps, piping, valves, etc.)
• Willingness to learn and work in a fast-paced, mission-critical environment
• Strong attention to detail and commitment to safety

Education / Licenses / Certifications

• High school diploma or equivalent
• Proof of education, licenses, and certifications will be required where applicable.

#LI-DNP

Scale’s Robotics business is rapidly expanding, supporting customers building physical AI. This position will be a key contributor in working to build out Scale’s data factory in Mexico and in supporting robotics data collection. This is a first of its kind role at Scale and you will have the opportunity to advance Scale’s robotics offerings.

You will:

• Partner with cross-functional stakeholders to bring up new robots and productionize the maintenance of robots and collection hardware.
• Play a critical role in supporting the day-to-day operations of the factory by bringing up and maintaining robots and collection hardware.
• Provide technical support for data collection operations.
• Manage physical inventory, maintain equipment, and coordinate logistics.
• Become a subject matter expert on all capabilities of the robotics platforms deployed in the factory.
• Develop technical domain expertise in areas of 2D and 3D imaging and annotation, multi-sensor fusion and calibration, GPS/INS navigation systems, computer vision, and other autonomy-adjacent concepts.
  
  

You have:

• Academic (Bachelors/Licenciatura) or industry experience - Engineering background - preferably in Computer Science, Mathematics, or other Engineering fields.
• 2+ years of experience developing with Python, C++, Java and/or other scripting languages.
• 1-3 years of experience in hardware labs or a manufacturing environment.
• Experience managing risk and operating robots safely.
• Strong project management and interpersonal skills, high attention to detail, and a strong sense of ownership.
• High level of comfort communicating effectively across internal and external organizations.

Nice to have:

• Hands-on experience in Robotics, AI, and/or Computer Vision.
• Intellectual curiosity, empathy, and ability to operate with a high degree of autonomy.
• Experience building and/or maintaining lab networks and data pipelines.
• Experience running large-scale data collection and controlled experiments
• Experience building out facilities.
• Experience in logistics.

As Scale's product portfolio and customer base expand, we are seeking skilled Site Reliability Engineers to manage and maintain our physical infrastructure, including robot stations, servers, computers, and network installations. You will play a crucial role in ensuring our on-site technical facilities operate smoothly while coordinating resource usage and providing hands-on support to remote engineering teams.

These engineers will gain a deep understanding of our physical infrastructure and technical facilities, enabling them to effectively install, configure, and maintain critical systems when needed. A critical aspect of this role will be coordinating access to shared technical resources and serving as the on-site point of contact for remote engineers who need physical changes performed, transforming currently manual coordination processes into a more streamlined and efficient workflow.

You will:

•  Install, configure, and maintain robot stations and related technical equipment on-site.
• Manage and maintain server infrastructure, workstations, and computing equipment in our facilities.
• Oversee network installations, including routers and cabling infrastructure.
• Coordinate access to technical facilities, maintaining schedules and ensuring orderly usage of shared resources.
• Establish and enforce safety protocols and usage guidelines for technical facilities.
• Provide hands-on support to remote engineers, performing physical changes and configurations as requested.
• Troubleshoot hardware, network, and connectivity issues, ensuring minimal disruption to operations.
• Document infrastructure configurations, changes, and maintenance procedures to ensure maintainability and knowledge transfer.
• Proactively identify maintenance needs and capacity constraints to prevent issues before they arise.
• Drive standardization and foster collaboration across different teams to achieve efficient facility usage.

Ideally you'd have:

• 5+ years of experience as an IT Technician, Field Engineer, Facilities Technician, or similar hands-on technical role.
• Proven track record of installing and maintaining server hardware and workstations.
• Experience configuring and troubleshooting network infrastructure and physical installation work.
• Experience coordinating shared resources or facilities, managing schedules and access.
• Familiarity with Linux, Windows and MacOS.
• Knowledge of Python/C++, scripting, and command line (cmd/bash) operations.
• Basic understanding of electrical systems for robot stations and equipment.
• Comfort with rapidly changing, fast-paced environments and a passion for finding solutions to complex physical infrastructure problems.
• Basic understanding of safety protocols and an eagerness to integrate them into facility operations.
• A hunger for learning new technologies, particularly in the realm of robotics and automated systems.
• Strong problem-solving, analytical, collaboration, and communication skills.

Nice to haves:

• Experience with robotics systems or automated equipment.
• Exposure to industrial charging systems or battery management systems.
• Prior experience in facility management or lab coordination.

Job Summary:

As an Electrical QA/QC Technician at Loenbro Mission Critical, you will play a critical role in ensuring the highest quality and safety standards are met throughout our electrical projects. You will be responsible for conducting inspections, tests, and quality control measures to maintain our reputation for excellence.

About Loenbro

Loenbro is a trusted, long-term construction lifecycle partner to thousands of customers across the U.S. Our service offerings include Critical Electrical, Mechanical & Structural, Soft Crafts, Inspection, Underground Maintenance and Installation, and Fabrication, and our vertical market focus spans all industries. Our expertise lies in simplifying the complex, so that our clients gain clarity and control in construction and maintenance. We do this by taking full ownership on every interaction, delivering multi-scope project excellence, and establishing long-standing relationships with our partners as we enhance and maintain your critical infrastructure. We have a national presence but a local approach—so that every customer benefits from our capabilities and our care. Through their relationship with us and the One Loenbro model, our customers are able to simplify, control, and succeed in the everyday.

Responsibilities:

· Quality Assurance: Develop and maintain a robust quality assurance and quality control (QA/QC) program for electrical projects, including the review of project plans and specifications.

· Inspection: Conduct thorough inspections of electrical installations, equipment, and materials to verify compliance with industry standards, codes, and project requirements.

· Testing: Perform electrical testing, measurements, and functional checks to ensure the integrity, safety, and reliability of electrical systems.

· Documentation: Maintain detailed records of inspections, test results, and any non-conformance issues. Prepare and submit comprehensive reports to project managers and clients.

· Compliance: Ensure that all electrical work complies with local, state, and national electrical codes and regulations.

· Problem-Solving: Collaborate with project teams to identify and resolve quality-related issues in a timely manner.

· Training: Provide guidance and support to project personnel regarding quality and safety standards, fostering a culture of quality excellence.

Qualifications:

· 1-3 years of previous experience in quality assurance/quality control roles within the electrical industry is highly desirable.

· Degree in Electrical Engineering, Quality Control, or a related field (Preferred).

· Strong knowledge of electrical codes, industry standards, and regulations.

· Exceptional attention to detail and strong analytical skills.

· Effective communication and documentation skills.

· Proficiency in the use of testing equipment and tools.

· Ability to work independently and as part of a collaborative team.

· Commitment to safety, quality, and continuous improvement.

· OSHA10 or higher and other safety certifications are highly preferred.

Physical Demands and Work Environment

The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

Work Environment:

· Indoor office setting with controlled temperature.

· Outdoor industrial sites with exposure to weather extremes.

· Potential exposure to noise, dust, chemicals, or other environmental factors.

· Travel requirements: up to 10% of time.

This role requires compliance with all applicable safety regulations, personal protective equipment (PPE) requirements, and Loenbro's Environmental Health and Safety (EH&S) policies.

Benefits

Loenbro offers a competitive salary, comprehensive benefits package, and rewards to those who join our team:

· Medical, dental, and vision insurance

· 401(k) retirement plan with company match

· Paid time off (PTO) and holiday pay

· Life and disability insurance

· Professional development and training opportunities

· Employee assistance program (EAP)

Benefits eligibility may vary based on employment classification and hours worked.

Our Core Values

LEAD with Values:

· Live with Integrity – We do the right thing and do what we say, in every Interaction - and practice stewardship to car for the communities where we live & work.

· Exceed Expectations – We anticipate customer needs, deliver Innovative solutions, and dedicate ourselves to creating outcomes that make a real difference.

· Act with Urgency – We take action, adapt seamlessly, and keep projects moving without compromising quality - because our customers priorities are our priorities.

· Deliver Excellence – We combine our passion for quality, our Industry expertise, and our eye for Innovation to make excellence our standard.

Guided by core values, grounded in grit and a commitment to excellence, Loenbro maintains and enhances the industrial infrastructure that betters our families, customers, and local communities.

---

Loenbro is an Equal Opportunity Employer.

Cottonwood Residential is hiring! We are looking for a Maintenance Technician to join our team at Pavilions Apartments in Albuquerque, NM. Apply today!

Compensation & Benefits of a Maintenance Technician

• Competitive pay!
• Full health, vision, dental, life, and disability benefits - available within 1-30 days!
• Generous 401k and HSA Company match!
• Paid time off – eligible for 3 weeks (120 hours) in 1^st year!
• 10.5 paid holidays!

Qualifications & Required Experience of a Property Maintenance Technician

• Ability to read, write, and speak English to communicate with customers, process Company paperwork, and interpret safety and operating manuals and procedures.
• Must be able to move, carry, reposition, or lift items weighing up to 50 lbs.
• Ability to walk and stand for long periods of time.
• Ability to climb stairs, ladders, scaffolds, and ability to navigate elevation changes while maintaining balance.
• Frequent need to sit, stoop, kneel, crouch, crawl, bend, push/pull, and ability to navigate difficult terrain and access small areas.
• Ability to work standard community hours, including evenings and weekends. 
• Ability to work as an on-call technician and provide after-hours emergency service with the support of the Service Manager while following Company standards. 
• Perform repairs that may include, but are not limited to, plumbing, electrical work, and general carpentry work related to household, building, and property grounds repairs. 
• EPA certification Type II or Universal is a plus.
• CPO certification is a plus.
• Valid Driver's License is required.

Build the Path Forward

At Path Robotics, we’re building the future of embodied intelligence. Our AI-driven systems enable robots to adapt, learn, and perform in the real world closing the skilled labor gap and transforming industries. We go beyond traditional methods, combining perception, reasoning, and control to deliver field-ready AI that is risk-aware, reliable, and continuously improving through real-world use.

Big, hard problems are our everyday work, and our team of intelligent, humble, and driven people make the impossible possible together.

We are seeking a highly skilled and technically proficient Field Service Technician to join our dynamic team focused on revolutionizing manufacturing processes. As a key member of our technical workforce, you will be responsible for operating, maintaining, and troubleshooting advanced robotic welding systems and automation equipment. This role demands a strong understanding of engineering principles, hands-on experience with mechanical and electrical systems, and the ability to integrate cutting-edge technology into diverse manufacturing environments.

This is a remote role based in Mexico. Employment will be facilitated through a locally compliant entity.

What You’ll Do

• Operate and maintain a state-of-the-art multi-robotic welding system, demonstrating proficiency in robotic kinematics and dynamics.
• Load, monitor, and inspect welded assemblies with precision utilizing robotic vision systems and sensors.
• Accurately manage inventory of parts and completed assemblies.
• Conduct preventive maintenance, troubleshooting, and repairs on automation equipment and cells, both locally and at customer sites.
• Record and analyze data to facilitate engineering-driven issue resolution.
• Monitor cell performance and ensure precise part fit-up.
• Operate specialized machines integrated into customer manufacturing processes.
• Integrate autonomous welding cells into customer manufacturing processes, demonstrating proficiency in robotic system integration and communication protocols.
• Service and maintain pneumatic systems, welding equipment, robotics, and electrical automation devices.
• Integrate autonomous welding cells into customer manufacturing processes.
• Gain expertise in Forge processes, including operating the cell through command prompts and code changes.
• Interface with customers to optimize equipment efficiency.
• Collaborate with engineering resources to troubleshoot issues promptly.
• Inspect, clean, and replace electrical and mechanical components.
• Demonstrate adaptability to evolving needs and rapid developments in the field.
• Willingness to travel extensively (75%+ of the time) to customer sites

Who You Are

• Technical training, Trade School certification, Associate degree in Engineering Tech, or equivalent industry experience.
• Hands-on experience in the design, assembly, and troubleshooting of mechanical and electrical systems, preferably in manufacturing equipment.
• Welding experience is desirable, but certifications are not mandatory.
• Fluent in English and Spanish is desirable, but not required
• Familiarity with fabrication or machine shop processes.
• Comfortable with learning and using programming languages.
• Detail-oriented with experience handling small and fragile components.
• Passionate about collaborative work in a dynamic environment.
• Eagerness to learn and grow in the field.

Why You'll Love It Here

• Daily free lunch to keep you fueled and connected with the team
• Flexible PTO so you can take the time you need, when you need it
• Comprehensive medical, dental, and vision coverage
• 6 weeks fully paid parental leave, plus an additional 6–8 weeks for birthing parents (12–14 weeks total)
• 401(k) retirement plan through Empower
• Generous employee referral bonuses—help us grow our team!

Who We Are

At Path Robotics we love coming to work to solve interesting and tough challenges but also because our ideas are welcomed and valued. We encourage unique thinking and are dedicated to creating a diverse and inclusive environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

If you require a reasonable accommodation to participate in the application process or any part of the hiring process, please contact HR@path-robotics.com. We are committed to providing equal access and will work with qualified individuals to ensure a fair and accessible hiring experience. We will respond to your request within 48 hours

We are seeking a detail-oriented Mechanical Commissioning Technician to support the commissioning, startup, and validation of mechanical systems in a mission-critical environment. This role is responsible for ensuring systems are installed, tested, and operating in accordance with design specifications and operational requirements.

Responsibilities:

• Execute a structured commissioning process for mechanical systems, including system verification, testing, calibration (as applicable), and validation.
• Perform detailed mechanical system walkdowns to identify deficiencies, incomplete work, or deviations from design; document findings and track resolution.
• Conduct mechanical inspections and functional testing to confirm system readiness and support startup activities.
• Coordinate with engineering, construction, and operations teams to resolve commissioning issues and ensure system performance meets design intent.
• Support system turnover and handover to operations by ensuring all commissioning requirements are completed and documented.
• Maintain accurate commissioning documentation, including reports, checklists, punch lists, and as-built records.
• Follow and enforce strict safety protocols, identifying and mitigating risks related to rotating equipment, pressurized systems, and hazardous processes.
• Perform additional duties as assigned to support project and commissioning objectives.
• Any other duties or responsibilities that may be assigned to you in your role. 

Skills Required:

• Minimum 2+ years of experience commissioning mechanical systems in a mission-critical environment (e.g., data centers, semiconductor facilities, or similar).
• Strong understanding of mechanical systems such as HVAC, piping, pumps, and rotating equipment.
• Experience with commissioning processes, documentation, and system startup procedures.
• Ability to read and interpret engineering drawings, P&IDs, and specifications.
• Strong problem-solving skills and attention to detail.
• Effective communication and coordination skills across cross-functional teams. 

Education / Licenses / Certifications:

• Associate’s or Bachelor’s degree in Mechanical Engineering, Industrial Engineering, or a related field.
• Proof of education, licenses, and certifications will be required where applicable

Benefits:

• Medical, Dental and Vision Insurance 
• Life, Short-Term, Long-Term Disability Insurance 
• Training and Education Assistance 
• 401k Retirement Plan 
• Extra Annual Leave with Years of Service 
• Maternity/Paternity Leave 
• Recognition Rewards
  
  

#INDHP

VSC Fire & Security in Albuquerque, New Mexico is seeking candidates for the position of Integrated Systems Service Technician.

Position Summary:

Integrated Systems Service Technician provides safe and efficient service on multiple integrated systems. Resolves technical issues and gives potential resolution to unresolved issues. Has a good technical knowledge and ability to communicate effectively to understand problems and offer solutions. Technician is customer-oriented and patient to deal with difficult customers. Integrated Systems may include any of the following: Fire Alarm; Intrusion Detection; Access Control; CCTV; IP Cameras; Networking Infrastructure; Telecom; BDA (Bi-Directional Antenna systems); DAS (Distributed Antenna Systems); Audio/Video; Nurse Call; Area of Refuge; Intercom; Crestron; Extron; Honeywell; Notifier; Gamewell FCI; Silent Knight; Fire Lite; Siemens; AutoCall/JCI; or RATH.

 What we offer:

• Excellent pay $35.00 - $45.00 and up based on experience
• Overtime eligible
• Company vehicle and fuel card for applicable positions
• Company cell phone and/or tablet for applicable positions
• Company Laptop for programming FACP's and Security Head-in's.
• Paid vacation and company holidays
• Medical, dental and vision insurance options for you and your family
• Health Savings Account (HSA) or Flexible Spending Account (FSA)
• Company paid life insurance for full time employees
• Employee apparel program
• Company paid long term disability insurance
• Bonus for referring new employees
• Parental leave for full-time employees
• Employee Assistance Program (EAP)
• Boot Allowance
• NICET certification test reimbursement
• Opportunities for training and advancement
• All needed Personal Protective Equipment (PPE) provided

 What you need:

• Two to three years of experience in servicing at least one or more of the following systems: fire alarm, security systems, camera systems, access control, or similar systems.
• Proficient in following written and verbal instructions, with exceptional attention to detail and communication skills.
• Ability to maintain productivity in the field, set goals, and meet service schedule.
• Competent in reading plans, documents, meters, and to discern colors for safety signage.
• Ability to follow written and verbal instructions.
• Exceptional attention to detail and communication skills.
• Eagerness for professional development and growth.
• Ability to pass various background checks.
• Reliable transportation, valid State Driver's License with acceptable driving record for use of company vehicle.
• Desirable (but not required):
  
  • NICET lI or III in FAS along with I or II in ITFAS, Avigilon Cert, other manufacturers certifications.

 What you will do:

• Installs, tests, and repairs security, camera, access control, suppression, and fire alarm systems.
• Troubleshoot system malfunctions and false alarms.
• Program multiple types of systems and test for proper operation.
• Consults with client on system issues; provides recommendations for repair.
• Uses blueprints or building plans to determine proper systems to install/service based on building layout and setting.
• Runs wiring and circuits, installs hardware, and attaches electrical wires.
• Inspects and tests systems, batteries, and electrical wiring; make adjustments, and repairs as required.
• Replaces malfunctioning hardware when necessary.
• Ensures systems comply with NEC and NFPA fire codes.
• Explains and demonstrates system function and operation to end users.
• Performs other related duties as required.
• Be on call as required.
• Serve as the first point of contact for customers seeking technical assistance over the phone or email.
• Perform remote troubleshooting through diagnostic techniques and pertinent questions.
• Provide support for form development and maintenance of inspection forms.
• Tech savvy with working knowledge of office automation products, databases, and remote control.
• Follow design plans for installation jobs and communicate any design, perform service and deficiency jobs, and communicate and document any changes.

• 🌎 Remote environment: Built to make you feel that we are all together in one space without leaving your home office!
• 🏝 Self Managed PTO: Beach? Mountains? Camping? Discovering new experiences? You are free to take time out as you need!
• ⏰ Flexible work hours: We believe that you can reach your professional and personal goals working with us and encourage you to have a work life balance!
• 💡 A culture built on innovation that values big ideas: We are always open to new ideas that will improve the life of our Pros!
• 💻 MacBook (or PC if you prefer!) + Setup Fee ($500): What is remote work without the right tools? Here at HCP, you can choose your computer and set up your home office!

TO BE CONSIDERED FOR THIS ROLE, PLEASE SUBMIT AN UPDATED RESUME TRANSLATED TO ENGLISH

We know what you are thinking…WHAT IS THE ROLE AND WHAT WOULD YOU BE DOING? 👀

As an Associate, Content, you are a detail-oriented, agile leader of workflows who is comfortable both managing complex production cycles and applying a sharp editorial eye to content projects. You have a knack for tracking the fine details, identifying opportunities for operational change, and effectively implementing them across the team. You serve as the primary bridge between the content team and cross-functional partners, ensuring that our brand voice is protected and our projects move from concept to completion without friction. You thrive in a fast-paced environment and take high ownership of the "how" behind our content engine.

Our team is passionate, empathetic, hard-working, and above all else, focused on improving the lives of our service professionals (our Pros). Our success is their success.

In your day to day, you will: 

• Serve as the key operational and editorial liaison between content and cross-functional teams, keeping projects moving and stakeholders informed
• Manage day-to-day content production workflows, including intake routing, status tracking, review coordination, and publishing logistics
• Lead the organization and maintenance of the content calendar to ensure the timely delivery of assets across all marketing channels
• Use AI tools to streamline operational and editorial support tasks such as research, QA automation, brief generation, content development, and scheduling
• Coordinate with the editorial lead to gather and organize strategic inputs and outputs for high-priority content projects
• Proofread and edit content for grammar, punctuation, quality, and voice consistency, providing constructive feedback and logic-based reasoning to partners
• Identify and implement process improvements within the content lifecycle to increase team efficiency
• Participate in brainstorming sessions to develop new content ideas and campaign concepts
• Update and manage content-led pages to ensure accuracy, relevance, and alignment with current campaigns
• Manage multiple complex projects simultaneously while meeting strict deadlines

We think this role is for you if have...

• 2-4 years of experience in copywriting, content operations, copyediting, and/or project management
• Demonstrated critical thinking skills and the ability to write and copyedit for diverse audiences and platforms
• Strong proficiency in Google Workspace and project management systems (i.e., Jira/Confluence, Asana, Monday.com, or similar)
• Experience with content management systems (i.e., WordPress, Iterable, Salesforce)
• Bachelor’s degree in Communications, English, Marketing, or equivalent work experience

What will help you succeed???

• Demonstrated ability to leverage AI tools to improve workflows, streamline execution, or enhance outputs
• Exceptional attention to detail and a passion for "clean" copy
• Strong understanding of how content projects and stakeholders connect across integrated campaigns and channels
• Strong communication skills and the ability to influence and operationalize change across different teams with confidence
• Self-starter mentality with a sharp editorial eye and the ability to prioritize in a high-volume environment

✨ Let’s talk numbers! ✨
Our compensation range for this role begins at $29,800-$35,000 USD annually 💵

Housecall Pro is a fintech company founded in 2013. We built a SaaS platform that helps Home Service Professionals operate their businesses. We created the application for plumbers, electricians, and other Pros in the home improvement/trades industries.

Housecall Pro is a simple, cloud-based field service management software platform aimed at helping companies keep track of jobs, monitor technician activity, and produce invoices easily.

Our core product helps our clients with scheduling, dispatching, job management, invoicing, payment processing, marketing, and more. They used to struggle with the ton of paperwork after their hours. Now they can save time, and manage their business in one app.

We support more than 27,000 businesses and have over 1,300 ambitious, mission-driven employees in San Diego, Denver, and all over the world (including 200+ talented and innovative Engineers). #LI-Remote

Company Overview

Kairos Power, is a new nuclear energy technology and engineering company whose mission is to enable the world’s transition to clean energy, with the ultimate goal to dramatically improve people’s quality of life while protecting the environment. This goal will be accomplished through the commercialization of the fluoride-salt-cooled, high-temperature reactor (FHR) that can be deployed with robust safety, affordable costs, and flexible operation to accommodate the expansion of variable renewables.

Job Summary 

Kairos Power is seeking a Facilities Mechanical Technician with broad building and mechanical expertise supporting industrial, commercial and/or R&D facilities. This position will be located at the Kairos Power Southwest facility in Albuquerque, New Mexico and will report to the Facilities Department. The Facilities Maintenance Technician will support a variety of facilities maintenance tasks across the site including performing inspections, installations, repairs, replacements, and other general tasks on existing facility infrastructure. The role will also conduct testing, operations, troubleshooting, and mechanical work in support of the engineering teams onsite.  

The ideal candidate will have hands-on experience performing/coordinating maintenance on boilers, chillers, and HVAC systems and experience working with R&D test equipment, manufacturing equipment, and other commercial building systems including Building Management Systems (BMS), fire protection, fire alarms, access control, security cameras, and security alarms. 

Responsibilities

• Provide technical support for required mechanical tasks in collaboration with internal facilities, construction, engineering and project teams
• Complete preventative and corrective maintenance/troubleshooting on site Boilers, Chillers, HVAC, and other mechanical systems (plumbing, compressed air, etc.)
• Support the scope and coordination with facilities contractors to complete required projects/work on site
• Maintain a detailed understanding and knowledge of the building’s mechanical, electrical, and plumbing systems
• Support the construction and operations of Boilers, Chillers, HVAC and other building systems equipment in support of R&D testing at the facility
• Development of operating standards and Standard Operating Procedures (SOPs) for mechanical equipment (Boilers, Chillers, Reverse Osmosis (RO), HVAC, etc.)
• Perform lockout/tagout to isolate components and de-energize equipment.
• Ability to test, troubleshoot, and repair malfunctioning systems, apparatus, or components by using basic electrical test equipment (voltmeters, ohmmeters)
• Carry out skilled maintenance tasks encompassing inspections, operations, installation, and troubleshooting of building equipment such as bridge cranes and dock equipment
• Manage small facilities projects, work orders, and preventive maintenance tasks using computerized management maintenance systems (CMMS) and app-based systems
• Document and communicate results of preventive maintenance tasks including visual inspections, defect detection, hazard identification, and code compliance
• Analyze, prepare, and deliver reports; fill out preventative maintenance requests, deficiency reports, and work orders using a computer and other equipment.
• Provide effective and timely customer service to internal clients and team members.
• Comply with national, local, and company safety codes, procedures, policies and practices.
• Participate in emergency response activities related to mechanical system failures or facility outages, including on-call or after-hours support as required.
• Support regulatory inspections, audits, and corrective action implementation related to mechanical systems and facilities compliance.
• Assist with lifecycle planning, equipment replacement evaluations, and maintenance optimization initiatives.
• Other duties as assigned.

Qualifications

• High school diploma, GED, or equivalent and completion of related accredited program or equivalent work experience in industrial or commercial maintenance, with emphasis on mechanical and general building work
• 3+ years of experience working with HVAC, plumbing, boilers, chillers, or related systems in industrial, commercial and/or R&D facilities
• Certifications/Licenses for completing work on Boilers, Chillers, or refrigerant systems in the state of New Mexico.
• Experience testing, commissioning, troubleshooting, and repairing mechanical equipment.
• Experience in reading plumbing and mechanical diagrams, drawings, schematics, & specifications.
• Experience with Building Management System (BMS), Building Automation System (BAS), Energy Management System (EMS), and/or HVAC remote operation systems troubleshooting.
• Must have experience establishing a safe workplace utilizing NFPA 70E as a safety standard (LOTO etc.); intermediate knowledge of OSHA and EPA regulations, and adherence to applicable Environment, Health, and Safety (EHS) laws and regulations is also required

Knowledge, Skills & Abilities

• Ability to maintain, inspect, operate, install, repair, replace, test, and troubleshoot mechanical, plumbing, and other mechanical system components.
• Ability to oversee mechanical commissioning, testing, and maintenance activities performed by consultants or mechanical contractors.
• Customer service and interpersonal skills necessary to interact effectively in writing and verbally with technical, administrative, and management personnel.
• Ability to work effectively independently and as a team member.
• Strong computer-based skills including ability to utilize software to create and update work orders, send and receive e-mails and internal messages, participate in computer-based training, web-based meetings, and utilize internal company applications.
• Ability to operate motor vehicles and be insured on company vehicles
• Ability to work with highly collaborative team
• Ability to solve problems quickly and efficiently
• Prioritizes and ensures safety of oneself and others
• Ability to proactively collect, manage and transfer knowledge
• Ability to seek different and novel ways to create efficiencies when working on problems, challenges and issues
• Knowledge of applicable building codes, mechanical codes, and industry standards relevant to facility mechanical systems.
• Ability to prioritize and manage multiple maintenance tasks in a dynamic operational environment.
• Ability to recognize abnormal equipment conditions and escalate issues appropriately to minimize downtime and safety risk.

Physical Conditions 

• Setting up and transferring temporary structures (e.g. scaffolding, ladders)
• Moving self in different positions to accomplish tasks in various environments including tight and confined spaces
• Remaining in a stationary position, often standing, or sitting for prolonged periods
• Moving about to accomplish tasks or moving from one worksite to another
• Adjusting, moving, transporting, installing, positioning, or removing objects up to 50 pounds in all directions
• Communicating with others to exchange information
• Operating motor vehicles, heavy equipment or machinery
• Use hand tools
• Repetitive assembly operations of manufacturing test fixtures and test setups in collaboration with engineering and manufacturing teams 

Environmental Conditions

• General office environment
• Low temperatures
• High temperatures
• Outdoor environment or elements such as precipitation and wind 
• Noisy environments
• Small and/or enclosed spaces
• Odors or fumes from chemicals or chemical reactions
• Elevated heights
• Assessing the accuracy, neatness and thoroughness of the work assigned
• High-concentration, demanding and fast-paced
• Exposure to moving mechanical parts and energized or pressurized systems during inspection, maintenance, and testing activities.
• Variable lighting conditions in areas such as mechanical rooms, rooftops, or equipment enclosures.

Safety and PPE 

• Reading and interpreting hazardous warning signs
• Manipulating, cleaning and disposal of hazardous materials
• Reporting issues with equipment or unsafe conditions
• Color identification: detecting, distinguishing, recognizing and identifying colors
• Wearing proper PPE, to include face mask, face shields, gloves, safety shoes, etc.
• Compliance with lockout/tagout, confined space, fall protection, and hazard communication procedures when performing assigned work.

Travel 

• Some travel may be required, up to 5% 

Certification

• Holds certifications or licensure for operations and maintenance of boilers in the state of New Mexico
• Preferred but not required to be certified to handle refrigerant in the state of New Mexico
• Capable of obtaining forklift and boom lift certification
• Completion of OSHA 30 Construction Safety Training preferred
• First Aid/CPR/AED Training is a plus 

Additional Requirements

• Occasionally requires overtime 
• Seldom requires working weekends 
• Occasionally requires schedule flexibility
• Occasionally requires extended hours to support critical project timelines

#LI-Onsite

Job Summary 

Kairos Power is seeking a highly motivated Operator to support our plant operations and testing team. In this role, you will contribute to the development and deployment of the company’s engineering testing capabilities including assembly, maintenance and operation of large-scale hardware and equipment. This role will require the individual to start and work on-site in Albuquerque, NM for approximately 2 years in preparation for our operation in Oak Ridge, TN. Long-term, this individual may have the opportunity to transition and support operations on-site at our facility in Oak Ridge, TN. The ideal candidate takes pride in his/her hands-on work, organizational skills, has experience in 24/7 plant or large-scale testing operations, and will ultimately contribute to the training and transfer of knowledge/key learnings between operators at each location.

Responsibilities 

• Assembles and installs process and auxiliary equipment into assigned facilities. Frequently uses heavy equipment such as forklifts, telehandlers, and overhead hoists to support installation. 
• Commissions, operates, and maintains mechanical and electrical equipment.
• Prepares, reviews and executes system and component level commissioning, operating and maintenance procedures.
• Performs acceptance testing following new equipment installation including hydrostatic, pneumatic, I/O checks, and electrical component calibrations checks.
• Supports day-to-day operations of the assigned facility including startup, monitor, and shutdown processes and auxiliary equipment.
• Performs chemistry sampling and analysis using standardized analytical instruments and procedures.
• Monitors equipment performance by interpreting and trending process parameters. Takes corrective action to place malfunctioning equipment in a safe state.
• Performs minor preventative and corrective maintenance on mechanical and electrical equipment to include filter replacements, equipment cleaning, and consumable replacements.
• Performs equipment troubleshooting as necessary.
• Perform Lockout-Tagout of mechanical and electrical equipment.
• Reviews and executes hazardous operations per standardized operating procedures.
• Assists engineering staff to execute the R&D test program.
• Other duties as assigned

Qualifications 

• Associate or Bachelors degree in an Engineering Technology program or equivalent or 2+ years of experience as a plant operator or technician (mechanical, electrical, instrumentation, chemicals, power plant, military, or similar backgrounds are highly desired)
• Ability to start and work on-site at the Albuquerque, NM site for approximately 2 years to develop in-depth understanding of company’s large-scale hardware, equipment, and processes
• Ability and willingness to transition between Kairos Power sites in support of operations work and process development, including opportunity to potentially transition to support on-site operations at our future facility in Oakridge, TN
• Ability to understand and follow technical procedures
• Ability and interest in being cross trained and learning different processes to perform other jobs as needed
• Ability and willingness to work with hazardous materials in PPE including full-face respirator and Tyvek suit
• Familiarity with basic hand tools
• Mechanically inclined with an ability to operate plant equipment, hands-on experience with plant equipment and operations desired
• Experience with Instrumentation and Controls systems
• Computer skills including spreadsheet use
• Ability to communicate with others effectively
• Ability to read P&ID and mechanical/electrical drawings
• Ability to work with highly collaborative team
• Ability to solve problems quickly and efficiently
• Always works in a safe and compliant manner
• Prioritizes and ensures safety of oneself and others
• Ability to proactively collect, manage and transfer knowledge
• Ability to seek different and novel ways to create efficiencies when working on problems, challenges, and issues

Physical Conditions 

• Ascending or descending ladders, stairs, scaffolding, ramps, scissor lifts, articulated boom lifts and the like
• Setting up and transferring temporary structures (e.g. scaffolding, ladders)
• Moving self in different positions to accomplish tasks in various environments including tight and confined spaces
• Remaining in a stationary position, often standing, or sitting for prolonged periods
• Moving about to accomplish tasks or moving from one worksite to another
• Adjusting, moving, transporting, installing, positioning, or removing objects up to 50 pounds in all directions
• Communicating with others to exchange information
• Operating motor vehicles, heavy equipment and machinery
• Repetitive assembly operations of manufacturing test fixtures and test setups in collaboration with engineering and manufacturing teams 

Environmental Conditions

• Shop floor environment
• Low temperatures
• High temperatures
• Outdoor environment or elements such as precipitation and wind
• Noisy environments
• Small and/or enclosed spaces
• Odors or fumes from chemicals or chemical reactions
• Evaluated heights
• Accessing the accuracy, neatness and thoroughness of the work assigned
• High-concentration, demanding and fast-paced

Safety and PPE

• Reading and interpreting hazardous warning signs
• Manipulating, cleaning and disposal of hazardous materials
• Reporting issues with equipment or unsafe conditions
• Wearing proper PPE, to include full-face respirator, face shields, gloves, safety shoes, and non-permeable suit
• Handling of Beryllium (Be)

Travel 

• Some travel may be required, 5% or less

Certification  

• Capable of obtaining forklift and boom lift certification 

Additional Requirements   

• Requires occasional overtime
• Requires occasional working weekends
• Requires occasional schedule flexibility
• Requires occasional working 2nd shift, beginning at 7:00pm local time
• Requires occasional extended hours to support launch and critical project timelines 

#LI-Onsite