Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost

We are currently looking for qualified candidates for a Mechanical Engineer position. Will require experience with process equipment systems, in a manner in which equipment is operated, safety system design and compliance codes, and with facility troubleshooting as related to oil and gas production. 

Responsibilities:

• Perform job responsibilities as Lead Engineer, leading discipline on medium projects or assigned under the direction of the Department Manager and/or Project Engineer for larger projects
• Ensure adherence to project specifications, governing codes and standards, and good engineering practice
• Ensure adherence to project health, safety, security and environmental (HSSE) requirements as well as state and federal regulations
• Monitor the schedule, ensure that project objectives are met, monitor project controls and engineering execution within the approved budget
• Responsible for reporting on engineering, design and equipment development status to the Lead Mechanical Engineer, and performing monthly or bi-weekly assessments of progress
• Participate and contribute advanced level development of all phases of project engineering, including detail design and construction support
• Experience in development of upstream production facility drawings, checking process equipment system designs and participation in hazard reviews performed to API
• Develop the technical content of Mechanical equipment calculations, specifications and data sheets for inquiry and purchase. Ensure these documents are appropriately reviewed, approved, and transmitted
• Has direct communication with equipment manufacturers and works clarifications to resolution.
• Typical equipment includes Vessels, Heat Exchangers, Fired Equipment, HVAC, Pumps, Compressors.  General knowledge of applicable codes and standards.
• Procedure development including start-up, commissioning, operating and maintenance.
• Coordinate and incorporate project requirements and standards.
• Develop Mechanical Work Plans for the installation of equipment
• Initiate Project Deviation Notices that impact the mechanical specifications, effort-hour budget and/or schedule
• Coordinate and cooperate with the Engineers of other disciplines to ensure the smooth flow of all information, and to ensure alignment with project requirements and design basis
• Initiate and runs status meetings with the mechanical team to discuss project issues, coordinate/plan key milestone efforts, etc.
• Responsible for obtaining cost related information and developing scope of work documents for project estimates (e.g., TIC estimates)

Qualifications:

• Bachelor’s degree or Master’s degree in Mechanical Engineering from an accredited college or University
• 5+ years of overall experience on capital projects from feasibility through construction
• Familiarity with various project phases and the scope/deliverables required
• Advanced MS Office skills (Word, Excel, OneNote) preferred
• Excellent oral and written communication skills in English required
• Registered Professional Engineering license preferred
• Ability to train and travel to live facilities preferred

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. 

EquipmentShare is Hiring a Territory Account Manager (Pump, Power & HVAC)

At EquipmentShare, we’re not just filling a role — we’re assembling the best team on the planet to build something that’s never been built before. We’re on a mission to transform an industry that’s been stuck in the past by empowering contractors and communities through innovative technology, real-time support, and a team that truly cares.

We’re hiring a Territory Account Manager at our Advanced Solutions rental facility in Houston, TX, and we’re looking for someone who’s ready to grow with us, bring energy and drive to their work, and help us build the future of construction. Territory Account Managers will be responsible for expanding our existing customer base by building relationships with contractors and construction company principals. Advanced Solutions branches offer equipment rentals within climate control, compressed air, fluid solutions, power solutions and more.

Pay: $150,000 - $600,000 Total Compensation ($40,000 base salary + Uncapped commission with no market restrictions)

Primary Responsibilities

• Territory management of a geographical area. Responsible for the full sales strategy execution from market analysis, sales forecasting, pipeline management and revenue growth, through contract negotiation and customer retention.

• Quickly respond to inbound leads and requests. Familiar with Customer Relationship Management (CRM) systems.

• New business development and Client acquisition/Account development. Expand our existing customer base by building relationships with contractors and construction company principals. Tell them about the numerous ways EquipmentShare can help save them money, make more money and operate more efficiently. In other words, educate them on how EquipmentShare solves their problems!

• Maintain and nurture existing customer relationships to ensure our customers are 100 percent satisfied with the level of service and support they receive from EquipmentShare. Keep them up-­to­-date about new or additional ways in which EquipmentShare can help improve their business with our comprehensive jobsite solutions..

• Promptly respond to and resolve customer inquiries, requests, complaints or other communications. Conducts sales presentations to prospective and existing customers.

• Develop new sales strategies and techniques to increase our market share and improve our customer experience.

• Manages and supports job site activities and projects with remote and on site involvement.
• Assists with Equipment rental, sales, and service when needed by customers on-site.

Why EquipmentShare?

Because we do things differently — and we think you’ll feel it from day one. We’re a people-first company powered by cutting-edge technology. That means our proprietary T3 platform doesn’t just run our business — it also makes your job easier, safer, and more connected. Whether you’re behind the wheel, under the hood, leading a branch, or closing deals — tech supports you, and you drive us forward.

We’re a team of problem-solvers, go-getters, and builders. And we’re looking for teammates who take pride in doing meaningful work and want to be part of building something special.

Perks & Benefits

• Monthly Family Dinner Night — We treat you and your family to dinner every month, because family comes first. (An employee favorite!) *restrictions apply

• Competitive compensation: Base salary plus uncapped commission

• Commission guarantee period while building book of business

• Company provided truck or Vehicle allowance ($800/mo)

• Company provided cell phone or phone stipend

• Relocation assistance (discretionary)

• Full medical, dental, and vision coverage for full-time employees

• 401(k) and company match

• Generous PTO + paid holidays

• Gym membership stipend + wellness programs (earn PTO and prizes!)

• Company events, food truck nights, and monthly team dinners

• 16 hours of paid volunteer time per year — give back to the community you call home

• Career advancement, leadership training, and professional development opportunities

About You

You want to be part of a team that’s not just changing an industry for the sake of change — we’re transforming it to make it safer, more secure, and more productive. You bring grit, heart, and humility to your work, and you’re excited about the opportunity to grow within a fast-paced, mission-driven environment.

We’re looking for people who:

• See challenges as opportunities
  
  
• Embrace change and continuous improvement
  
  
• Bring energy, effort, and optimism every day

Skills & Qualifications 

• First and foremost, we’re looking for someone who’s tenacious and innovative and possesses superior outside sales experience and skills with a proven sales track record

• Pump, Power & HVAC (power generation, fluid solutions, heating & cooling solutions) Equipment or Industry knowledge (rental or construction) with experience in B2B  is sales preferred, but not required (if you’re a born salesperson, we’ll train you on what you need to know and how to win more business)

• Must be able to lift, carry, and place objects weighing up to 50 pounds without assistance.

• You have strong interpersonal and problem-solving skills

• You have the technical aptitude to adapt to the fast pace of a growing company and stay continuously educated on the latest EquipmentShare products and services

• You’re competitive, self-motivated and results driven, but thrive in a team-oriented environment

• Ability to manage strategic and national accounts

A Workplace For All

At EquipmentShare, we believe the best solutions come from a team that reflects the world around us. Our initiative — A Workplace For All — is rooted in the belief that we must work together to solve some of the toughest problems in construction. That means attracting, developing, and retaining great people from all walks of life.

We value different backgrounds, talents, and perspectives. We want you to feel like you belong here — because you do.

EquipmentShare is an EOE M/F/D/V.

Employment is contingent on passing a background check. Additionally, some roles require passing a drug test, depending on the job responsibilities.

Skills and Qualifications

Required Skills/Abilities: 

• Must own tools applicable to position

• Advanced mechanical aptitude and working knowledge of tools

• Experience working on power generators and/or commercial HVAC equipment, performing inspections, maintenance, and repairs

• Experience with calculating nominal and effective tonnage and/or kW requirements, along with reading and knowing schematics

• Superior customer service, teamwork and verbal/written communication skills

• EPA 608 certification is preferred. If you do not already have the certification, you should be able to obtain it within 6-12 months of employment.

Education and Experience:

• High School diploma, Trade school certificate preferred 

• Experience in field service, maintenance and repair preferred

• Valid driver's license with acceptable driving record. Must be at least 21 years old to operate company vehicle.

Physical Requirements:

• Must be able to move, stand, stoop and bend freely

• Must be able to lift up to 50 pounds at times

• Field Technicians may be required to be clean shaven in order to enter worksites for EquipmentShare customers who have this requirement

• This is a safety sensitive position and any offer of employment will be contingent on passing a 10 panel drug screen

A Workplace For All

At EquipmentShare, we believe the best solutions come from a team that reflects the world around us. Our initiative — A Workplace For All — is rooted in the belief that we must work together to solve some of the toughest problems in construction. That means attracting, developing, and retaining great people from all walks of life.

We value different backgrounds, talents, and perspectives. We want you to feel like you belong here — because you do.

EquipmentShare is an EOE M/F/D/V.

Employment is contingent on passing a background check. Additionally, some roles require passing a drug test, depending on the job responsibilities.

What You'll Do

As Sales Engineer at Giga, you are the technical heartbeat of every deal we close. You sit at the intersection of deep infrastructure expertise and high-velocity commercial motion — translating the complexity of AI data center development (electrical distribution, mechanical systems, and civil/site work) into compelling, credible narratives that win the confidence of the world's most sophisticated buyers. You will partner directly with our sales leadership to define technical strategy for each opportunity, own the solution architecture from first call through signed contract, and serve as the customer's trusted advisor from prospect to operational handoff. This is not a support role — you are a revenue driver who happens to speak the language of substations, cooling infrastructure, and site feasibility.

Where You'll Work

We are an in-office culture — velocity matters when you're building physical infrastructure, and the best decisions happen in the room. This role is ideally based in our San Francisco, Long Beach, or Houston offices, with full-time onsite expectations outside of bi-weekly WFH Fridays.

That said, we will make exceptions for truly exceptional talent if you live outside one of our hubs. If you're the right person for this role, we'll have a conversation about what works.

Responsibilities

• Serve as the primary technical resource in the sales cycle for AI data center opportunities, owning solution design across electrical, mechanical, and civil disciplines from initial scoping through contract execution.
• Partner with Account Executives to qualify opportunities, develop account strategies, and drive technical win plans that align Giga's capabilities to each customer's infrastructure requirements.
• Lead technical discovery sessions and site feasibility assessments, translating customer power, cooling, and site requirements into buildable, fundable Giga solutions.
• Develop and deliver compelling technical presentations, proposals, and RFP responses that address utility interconnection, power distribution, MEP systems, and civil/grading constraints.
• Build and maintain trusted advisor relationships with customer engineering, procurement, and executive teams throughout the sales process.
• Collaborate with Giga's internal engineering, construction, and project development teams to ensure proposed solutions are technically sound, constructible, and commercially competitive.
• Maintain accurate technical documentation and opportunity data in CRM, providing deal status and forecast updates to sales leadership.
• Contribute to the development of sales tools including technical playbooks, case studies, and standard solution configurations that accelerate future deals.
• Represent Giga at industry events, conferences, and customer site visits to build technical credibility and pipeline.

Requirements

• 5+ years of experience in a technical sales, sales engineering, or solutions engineering role within data center, utility-scale power, or industrial infrastructure.
• Deep technical knowledge in at least two of the following disciplines: electrical systems (medium/high voltage distribution, utility interconnection, backup power), mechanical systems (cooling infrastructure, HVAC, fluid systems), or civil/site work (grading, site utilities, permitting).
• Demonstrated ability to read and interpret engineering drawings, site plans, single-line diagrams, and technical specifications.
• Experience developing technical proposals, responding to RFPs, and presenting complex infrastructure solutions to both technical and executive audiences.
• Proven track record of closing or directly supporting the close of large, technically complex deals in a B2B environment.
• Strong project management skills with the ability to manage multiple concurrent opportunities at different stages of the sales cycle.
• Bachelor's degree in Electrical Engineering, Mechanical Engineering, Civil Engineering, or a related technical field — or equivalent practical experience.

Bonus Points

• Direct experience in hyperscale or colocation data center development, construction, or operations.
• Familiarity with AI/ML workload power and cooling demands, including GPU cluster infrastructure requirements.
• Existing relationships with hyperscaler procurement teams, large enterprise IT buyers, or data center developers.
• Experience with utility interconnection processes and grid-scale power procurement.
• Professional engineering licensure (PE) in electrical, mechanical, or civil discipline.
• Exposure to power purchase agreements (PPAs), site selection, or development finance in the infrastructure sector.

Benefits

• Subsidized health, dental, and vision insurance
• Equity (options) in a rapidly growing startup
• 401(k) with 4% employer match
• Unlimited PTO
• Parental leave
• Healthcare and Dependent Care Flexible Spending Accounts (FSA) or Health Savings Account (HSA)
• Commuter benefits
• Monthly team onsites where all offices come in-person to collaborate

Safety Coordinator                     

Reports to: Regional Safety Manager 

FLSA Status: Exempt

Location: Houston, TX

The Opportunity:

Seeking an experienced Safety Coordinator with a proven track record for success. The Safety Coordinator will provide direction, consultation and oversight for the administration and implementation of our Environmental, Health and Safety programs, policies, and procedures. Assist in the development of objectives, targets, plans, and procedures for regulatory compliance. Evaluate and provide direction for programs to minimize physical and financial exposure from potential or actual risks. Evaluate and provide direction for safety training requirements. This position requires a high level of correspondence with the service team, sales team, customers, vendors, and owners.

Responsibilities:

• Provide direction for aspects of Environmental, Health and Safety (EHS), including regulatory compliance and worker’s compensation.
• Assists, plans, and implements safety policies and procedures in compliance with local, state, and federal rules and regulations including Occupational Safety and Health Administration (OSHA) and Department of Transportation (DOT).
• Performs safety surveys and inspections to assure safe and healthy conditions for workers. Prepares written reports of findings and recommendations for corrective or preventive measures where indicated and follows up to ensure measures have been implemented.
• Works with service leaders on safety meetings to discuss EHS issues, support programs and projects, and advises on safety compliance concerns and/or preventative actions.
• Acts as a safety consultant/advisor to managers and leaders.
• Facilitates appropriate safety and health training for all employees, as well as accident prevention and investigation training for managers and supervisors. 
• Maintains safety files and records.
• Works with supervisors in conducting accident investigations.
• Manages findings from third party audit to corrective action and closure.
• Additional fleet safety administration duties assigned as necessary. 

The Required Profile:

• 3-5 years of Construction Safety related experience or equivalent combination of education and related safety experience
• Safety Certification (CHST, CHSO) a plus
• OSHA 500 & 510 certification highly preferred
• First Aid CPR Certified
• Bachelor’s degree a plus
• Moderate PC skills in Microsoft Office including Word, Excel, PowerPoint, and Outlook.
• Clear Driving Record with current valid license required.
• Excellent initiative, interpersonal communications skills, and a demonstrated ability to influence others.

Other Skills/Abilities:

Language Skills
Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.

Mathematical Skills
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs.

Reasoning Ability
Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Mental stamina for problem solving and prioritizing multiple tasks.

Environmental Requirements

Will be required to work in an office environment and possibly, occasionally in the field.

Physical Demands

While performing the duties of this job, the employee is regularly required to use hands to operate computer keyboard and telephone, reach with hands and arms. The employee frequently is required to stand, walk, and sit. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.

Travel and Work Availability

Must be able to travel overnight at leave 10-25% of the time.  Must maintain a regular and acceptable attendance at such level as is determined by management.  Must be available and willing to work such weekends and holidays as the employer determines are necessary to desirable to meet its business needs.

NOTE:  This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization.

Meriton is an Equal Opportunity Employer

Reports to: Area Service Manager

FLSA Status: Non-Exempt           

Location: Missouri City, TX 

The Opportunity

We are seeking an experienced Commercial HVAC Service Technician. This position will work as part of our dedicated team that services our contract with Lamar Consolidated Independent School District. This position will be responsible for performing electrical and mechanical inspection, start-up maintenance on the equipment we sell.  This is a full-time opportunity for an energetic go-getter. An ideal candidate will be customer service oriented and work well with others. Position requires a high level of correspondence with Project Managers, Service Coordinators and customers.

Responsibilities

• Performs electrical and mechanical inspection and maintenance on equipment to ensure peak performance
• Perform specific preventative maintenance including belt adjustments, oiling, greasing and cleaning of equipment
• Uses experience and technical skills with preventive maintenance and system operations to determine service requirements
• Ability to interpret engineering drawings in reference to layout, location and operation of the system(s)
• Represents the company in a positive manner to other trades, contractors and owners
• Advises owner/representative of preventive maintenance inspections performed and corrective actions to be taken
• Suggest additional services that are beneficial to customer
• Works in a team-based environment to share information and workload while ensuring customer satisfaction
• Submits required paperwork to Service Coordinator in a timely manner
• Must work in a safe manner on a daily basis and ensure that all safety measures are taken at all times
• Performs other duties as assigned
• Flexibility to work overtime/ weekends, as required

The Required Profile

• High School Diploma or equivalent
• Must have valid driver’s license with good driving record
• Must have current HVAC certification and OSHA 10 Training plus 5+ years’ experience working as a Service Technician in a commercial environment
• Operating knowledge of Microsoft office software and working proficiency with hand held computer (i.e. Smartphone, iPad)
• Electrical knowledge required and EPA Certification Preferred (i.e. HVAC Journeyman, Boiler Operator, Gas Installer, etc.)
• Ability to work in diverse conditions including but not limited to mechanical equipment rooms with exposure to noisy operating equipment, exposure to extreme weather conditions, risk of electrical shock (high voltage), climbing/working at elevated heights, etc.
• Must be able to climb, crawl, stoop, kneel and must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 75 pounds
• Ability to work independently with minimal supervision and balance requirements of multiple and varied duties

Other Skills & Abilities

Language Skills
Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.

Mathematical Skills
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs.

Reasoning Ability
Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Mental stamina for problem solving and prioritizing multiple tasks.

Environmental Requirements

Will be required to work in a field environment, multiple customer sites on a daily basis.

Physical Demands

While performing the duties of this job, the employee is regularly required to use hands to operate computer keyboard reach with hands and arms. The employee frequently is required to stand, walk, and sit. The employee is continually required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.

NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization.

IT Specialist II, IT Service Delivery

Reports to: Senior Manager, IT Service Delivery

Compensation: $75K/yr with Bonus Potential

FLSA Status: Full time

The Company

Meriton is a national investment holding company with a portfolio of six operating companies in the commercial HVAC industry. Founded in 2019, Meriton is the parent holding company to successful commercial HVAC businesses in the nation. All Meriton businesses offer innovative commercial systems with flexibility of equipment and solutions to best match each application. The Meriton businesses work with industry professionals and end users from the conceptual stage of projects to provide energy-efficient, value-added solutions to their complex problems. Our sales professionals offer technical expertise and application experience in the design, construction, commissioning, and operation of building mechanical systems.

The overall mission is simple: we want to create value and make a difference every day in our journey to be the best HVAC sales and service organizations in North America. Meriton believes we can succeed in that mission by being the BEST provider for our clients, the BEST partner for manufacturers, the BEST company for our employees, and the BEST investment for our current and future shareholders.

The Opportunity

The IT Specialist II ensures proper computer, software, and network operation so that end users can accomplish appropriate business tasks for all business units. This position assists customers by taking service desk calls on a shift basis and provides support, training, and access management as needed. They are also responsible for the build, deployment, effective maintenance, and tracking of all IT equipment. The IT Specialist II assists in the development of strategies and plans to create technology solutions that are in alignment with business operations. They possess excellent interpersonal and communication skills, both oral and written; able to articulate ideas to both technical and non-technical audiences.

Responsibilities

• New user equipment and account setup, including deployment and license management.
• Train end users in the use of equipment and software
• Actively diagnose and respond to support tickets, incoming calls, emails, and walk-up requests.  Track and monitor the problem to ensure a timely resolution and follow-up.
• Provide both in-person support and support for remote workers.
• Support Apple products such as MacBook, iPad, & iPhone
• Support Microsoft products such as Windows, Office, Office365, and other cloud-based applications and support various vendor applications as needed.
• Support Apple hardware and software to diagnose and resolve issues with desktops, laptops, portable Macintosh systems, and mobile devices.
• Configure and support iPhone and iPad devices.
• Assist staff by providing audio/video conference support for presentations and meetings.
• Provide direct support of cyber security practices maintaining anti-malware, threat management, vulnerability management and anti-phishing technologies.
• Interact with vendors to facilitate repairs of hardware, i.e., printers and laptops.
• Manage inventory of hardware and software assets
• Support development and implementation of new computer projects and new hardware installations as well as software rollouts.
• Perform system administration for various enterprise tools and platforms.
• Perform hardware and software system configuration, maintenance, and upgrades.
• Manage projects of moderate scope, such as: design and implementation, system migrations, and MDM deployments.
• Evaluate products and IT processes and then recommend changes.
• Document IT processes, workflows, and produce system documentation as needed.
• Occasional travel to branch office locations may be required.

Education/Experience

• Minimum 2 years of experience in an IT services support role
• Associate degree preferred
• MacOS experience required
• iOS experience preferred
• InTune experience preferred
• Microsoft (MCP) Certification and/or ITIL (fundamentals level) preferred
• Familiarity with PowerShell required
• Office 365 administration preferred
• Azure and Windows Server experience preferred
• MSP experience preferred
• Knowledge of TCP/IP - LAN, WAN, wLAN and vLAN technologies
• Knowledge of MS Active Directory infrastructure
• Familiarity with IP Telephony and cell phone technology
• Excellent analytic and problem-solving skills
• Capable of working independently with minimal supervision

Key Competencies

Language Skills 
Read and comprehend simple instructions, short correspondence, and memos. Write correspondence. Present information effectively in one-on-one and small group situations to customers, clients, and other organization employees.

Operating Skills
Discern between and prioritize tasks to determine the best way to accomplish goals.  Organize tasks to get results in a timely manner and often against strict deadlines.  Sort out processes and simplify them to maximize workflow.

Behavior Skills
Manage people and situations when conflicts arise.  Seize opportunities with the drive to complete goals.

Reasoning Ability 
Apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.  Handle problems involving several concrete variables in standardized situations. Possess the mental stamina for problem solving and prioritizing multiple tasks.

Personal and Interpersonal Skills
Establish and grow relationships with customers through effective verbal and written communication.  Have a strong dedication to the needs of the customers, manufacturers, and peers.  Have patience and listen actively to all business partners.  Solve problems and skillfully negotiates with a minimum of noise, while managing stress.  Demonstrate integrity and trust through appropriate directness and truthfulness.  Understand personal strengths and weaknesses, seeks feedback, and improves upon shortcomings.

Other Skills/Abilities

Environmental Requirements

Will be required to work in an office environment and occasionally in the field.

Physical Demands
While performing the duties of this job, hands are regularly needed to operate computer keyboard, telephone, and other general equipment. Frequent standing, walking, and sitting is necessary. Occasional climbing, balancing, stooping, kneeling, crouching, or crawling is also necessary. Must be able to regularly lift and/or move up to 25 pounds and frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.

Why Meriton?

• Medical Insurance, Dental Insurance, Vision Insurance
• 100% company match on 401(k) contributions, up to 6% of pay.
• Tuition Reimbursement
• Company-paid Disability insurance (short-term and long-term) 
• Company-paid group life insurance
• Paid Time Off & Holidays 
• Volunteer Hours
• Employee-paid supplemental insurance options
• Employee Assistance Program (EAP)
• FSA, HSA and commuter benefits options
• Paid parental leave
• Career growth and learning
• …and so much more!

This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization.

Additional Information

Meriton is an Equal Opportunity Employer. This job description is not intended to be all-inclusive; employees may perform other related duties as negotiated to meet the ongoing needs of the organization.

Who we are

CloudKitchens helps restaurateurs around the world succeed in online food delivery - our goal is to make food more affordable, higher quality and convenient for everyone. 

We take underutilized properties and transform them into smart kitchens so they can better serve restaurateurs, customers and the neighborhoods they’re in. Every time we launch a new facility we create jobs in that neighborhood, and we’re proud to provide a wide range of cuisines and options for healthy food at an affordable price.

We're changing the game for restaurateurs whether they’re entrepreneurs opening their first restaurant all the way through to your favorite global quick-service restaurant chains.  

Why this role is different

This isn’t a typical handyman job bouncing between unrelated work orders.

• Work on modern, standardized commercial kitchen facilities
• Consistent environments → faster repairs, less guesswork
• Mix of hands-on repairs + preventative maintenance + facility support
• Independent work with support from experienced teams when needed
• Clear path to grow into Senior Technician or Facilities Management roles
• Be part of a fast-growing operation supporting a massive, evolving industry

What you’ll do

Facilities Maintenance & Repairs

• Perform general repairs across multiple sites, including:
• Drywall, patching, and painting
• Tiling and basic masonry
• Shelving and equipment installation
• Floor repairs and upkeep
• Exterior maintenance (roofs, gutters, landscaping)

Preventative Maintenance

• Conduct routine maintenance on building systems:
• HVAC
• Plumbing
• Electrical
• Identify issues early and prevent costly breakdowns

Site Operations Support

• Travel between multiple sites (number of sites vary by region) throughout the week across the Houston area
• Troubleshoot and resolve day-to-day facility issues
• Partner with internal teams to keep kitchens fully operational

What Your Week Looks Like

60% hands-on repairs and maintenance

25% preventative maintenance

15% inspections, troubleshooting, and support

What we’re looking for

Required

• 2+ years of handyman, maintenance, or facilities experience
• Basic knowledge of HVAC, plumbing, and electrical systems
• Ability to work independently in a fast-paced, field-based role
• Valid driver’s license and reliable transportation

Preferred

• 3+ years of commercial facilities maintenance experience
• Experience in restaurants, hospitality, or multi-site environments
• HVAC/R experience or trade school background

Work Environment & Schedule

• Field-based role across the Greater Houston area
• Local travel between sites (home daily)
• Monday–Friday schedule
• On-call rotation and overtime opportunities

Why join us

• We are Changing the restaurant industry: You’ll be part of a team that helps restaurants succeed in online food delivery. 
• Collaborative environment: You will receive support and guidance from experienced colleagues and managers, helping you to learn, grow and achieve your goals, and you’ll work closely with other teams to ensure our customer’s success.

What else you need to know

• Be part of a company reshaping the restaurant industry
• Work in cleaner, more modern environments than traditional facilities
• Join a team where operations, food, and technology intersect
• Real opportunity to grow as we scale nationally

Pay: Ranging from $21.00 - $23.75/hr (based of years of experience).

Benefits:

• 401(k)
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Vision insurance
• Mileage and Toll Reimbursement

Looking forward to sharing more about a Career of Substance at CloudKitchens.

Ready to join us as we serve those who serve others?

#LI-Onsite

Your Opportunity

Scion is paving a path in student living and the Facilities Manager is a keystone team member in the execution of our vision. This position ensures safety and functionality of the property’s buildings and equipment and ensures optimal service is carried out by the onsite Facilities team and any third-party vendors.

The Facilities Manager is a subject matter expert and experienced leader who excels in a fast-paced, agile, collegiate environment. This role demands superior problem solving, leadership and unwavering follow through. Those in the Facilities Manager position may also be asked to assist other properties.

Your Benefits

• FLSA Status Exempt
• Discretionary annual bonus
• Paid Time Off + Floating Holidays
• Health Insurance
• Dental Insurance
• Vision Insurance
• 401k Matching
• Paid Parental Leave
• Learning reimbursement opportunities

Your Responsibilities 

• Manage all building services and preventative maintenance programs to the best of industries practices, the Scion’s Standard Operating Procedures, and in compliance with the State/Federal Govt./OSHA’s Codes/regulations.
• Manage the day-to-day operations including but not limited to heating, ventilating, air conditioning (HVAC), plumbing and piping, fire protection, and general building maintenance and troubleshooting, building automation systems and building maintenance
• Monitor systems and provides diagnostics, preventative maintenance, annual testing, permitting, certification for all major building systems including, but not limited to: chilled water systems with fan coil units, air handling units with outside condensers including roof top units (RTU), building stationary boilers, hot & cold water distribution systems (plumbing, pressure/pneumatic/storage tanks, variable frequency drive (and pumps & motors), domestic hot water heaters, building automation systems (BAS), electrical distribution systems, switchgears and controls, generators, uninterrupted Power supply (UPS), elevators and lifts, parking structures (ventilation/drainage Systems, T-Joints), entrance & exit Gates and overhead doors, shingled/tarred roof, TPO membrane roofing system, EIFS, brick, vinyl, & cementitious sideboard, ACP, curtain walls, insulated glass units (IGUs).
• Operate and manage all life safety systems including fire pumps, fire alarm monitoring panels, dry/wet sprinkler systems, visual and audible alarms, back flow preventers, smoke detectors, CO2 sensors/alarms, fire extinguishers, emergency lighting, means of egress, fire
• Prioritize and schedule maintenance work, assuring quality of work consistent with Scion’s standards.
• Manage the Facilities Technicians to ensure all service requests are completed within Scion standards and are appropriately and accurately
• Manage facilities budgets.
• Review completed work to verify conformance to standards or repair
• Ensure all emergency, routine maintenance/repairs are carried out in a timely and professional manner.
• Ensure all Preventive maintenance is carried out in a timely and professional manner.
• Respond promptly and effectively to all safety/risk-management-related issues at the
• Review completed work orders for accuracy of labor hours, materials’ cost, and track recurring equipment failures.
• Conduct regular inspection tours of buildings, interior common areas and the exterior of the property, equipment and surrounding grounds for deficiencies, potential safety, health, or code problems and necessary
• Prepare written reports summarizing findings, and advises other building users as appropriate, of the
• Provide recommendations for dealing with problems noticed in
• Oversee and supervise “Turn” preparation including the prompt inspection of vacated units, makes appropriate repairs and charges, and ensures completion as
• Inspect vacant units after repairs and maintenance have been completed to determine quality of work performed and readiness for
• Manage the maintenance spare parts and the tools inventory, determining which parts/tools to stock and their stock level and working directly with General Manager to maintain inventory of parts, tools, and supplies within
• Maintain shop appearance and all mechanical, supply, electrical and storage facilities on
• Ensure proper maintenance of equipment to ensure warranty compliance and extended useful life.
• Oversee all other contracted work in the building, obtaining bids and negotiating prices with vendors and contractors, as approved by the General Manager, Regional Manager or the Regional Facility Manager.
• Coordinate deliveries, schedules, and performance of all facility related
• Ensure proper safety procedures are followed, personal protective equipment is used, and health & safety policies are
• Manage process for keying and coring/coding of locks and maintain lock procedures, logbooks and protocols for key management and
• Effectively implement standard operating procedures and preventive maintenance programs according to Scion’s
• Take part in emergency preparedness planning and acts as essential personnel in
• Escalate unique or urgent repairs/replacements to General Manager and Regional Facilities Manager.
• Maintain records on all major systems including maintenance manuals, manufacturer’s cut sheets, warranties, and equipment
• Work closely with the General Manager and Regional Facilities Manager to manage, formulate and track facilities and capital
• Hire, train and develop Facilities team members, holding them accountable for delivering a high level of

The responsibilities listed above may not be all-inclusive.

What We Require

• High school diploma/GED, trade school diploma, or military training
• 8 years of relevant experience managing building system in multi-unit residential properties, 5 years of supervisory experience
• 5 years’ experience with building automation systems, and life safety systems
• EPA 608 Universal certification
• HVAC/EPA 608 Universal certification
• Certified Pool Operator (CPO), or intention to obtain within six months
• Expertise in plumbing, HVAC, electrical and mechanical systems as well as generally accepted maintenance practices
• Boiler operator or Stationary Engineer Certificate/License
• Ability to read and interpret documents such as design drawings, blueprints, safety guidelines, operating and maintenance instructions and procedural manuals
• Ability to manage multiple projects simultaneously, set priorities and meet deadlines
• Basic computer working knowledge, including Microsoft Office and CMMS
• Valid driver’s license
• Ability to stand 8 hours or longer per day and lift up to 100 lbs. as necessary

 Operational Details

• Job location is at the assigned property. May be required to travel periodically.
• Serves in an “on-call” capacity, except during approved PTO periods.

The Scion Group LLC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, religion, creed, national origin, color, gender, sex, sexual orientation, gender identity or expression, age, physical or mental disability (as long as the employee/applicant is otherwise qualified for the job with or without a reasonable accommodation), genetic information, HIV/AIDS status, marital status, uniformed service, veteran status, pregnancy or other legally protected status or category under federal or state law. The Scion Group LLC complies with applicable state and local laws governing nondiscrimination in employment in all locations in which the Company has properties. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation, training and other terms and conditions of employment. The Scion Group LLC is committed to the principles of equal employment opportunities.

IND2 #wearehiring #werehiring

Fairstead is hiring a Maintenance Technician to maintain the day-to-day operations and assume responsibility for maintaining the property's physical assets. 

RESPONSIBILITIES: 

• Inspect buildings and equipment regularly for needed repairs and improvements. 

• Perform necessary preventative maintenance and repairs on the property as needed.  

• Implement maintenance policies and standards to prevent misuse of property appliances.  

• Ensure that properties are safe and avoid any danger to their occupants, visitors, and workers.  

• Clean and prepare vacated buildings and rooms for new occupants to move in.  

• Check electrical wiring for accuracy and compliance with regulatory standards.  

• Check safety systems and devices for operational effectiveness monthly.  

• Participate in the on-call rotation. Respond promptly to emergency maintenance problems that may require attention outside of normal working hours.  

• Maintain an inventory of supplies, tools, and equipment. 

BENEFITS: 

• Generous employer contribution for Medical Insurance through Meritain Health. 

• Employer Paid Vision Plans. 

• Company Matched 401(k) Retirement Plan: 100% of the first 3%; 50% of the next 2%. 

• 12+ paid Holidays. 

• 15 days of PTO. 

• 7 Sick days. 

• Employer Paid Life Insurance. 

• Flexible Spending Account. 

• Nationwide Pet Insurance. 

• Disability Insurance. 

• Laser Correction Discount. 

• Employee Discounts on appliances, apparel, and more. 

QUALIFICATIONS: 

• Mechanical skills to handle minor repairs and fixtures.  

• Knowledge of electricity to diagnose electrical problems and carry out minor repairs.  

• General maintenance skills.  

• Verbal and written communication skills for effective delivery of information.  

• Prior experience as a Service Technician or in a similar role.  

• HVAC, CMRP, or equivalent certification preferred.  

• Ability to stand for extended periods.  

• Ability to lift to 70 pounds without assistance.  

• Dexterity and attention to detail. 

Fairstead is hiring a Maintenance Technician to maintain the day-to-day operations and assume responsibility for maintaining the property's physical assets. 

RESPONSIBILITIES: 

• Inspect buildings and equipment regularly for needed repairs and improvements. 

• Perform necessary preventative maintenance and repairs on the property as needed.  

• Implement maintenance policies and standards to prevent misuse of property appliances.  

• Ensure that properties are safe and avoid any danger to their occupants, visitors, and workers.  

• Clean and prepare vacated buildings and rooms for new occupants to move in.  

• Check electrical wiring for accuracy and compliance with regulatory standards.  

• Check safety systems and devices for operational effectiveness monthly.  

• Participate in the on-call rotation. Respond promptly to emergency maintenance problems that may require attention outside of normal working hours.  

• Maintain an inventory of supplies, tools, and equipment. 

BENEFITS: 

• Generous employer contribution for Medical Insurance through Meritain Health. 

• Employer Paid Vision Plans. 

• Company Matched 401(k) Retirement Plan: 100% of the first 3%; 50% of the next 2%. 

• 12+ paid Holidays. 

• 15 days of PTO. 

• 7 Sick days. 

• Employer Paid Life Insurance. 

• Flexible Spending Account. 

• Nationwide Pet Insurance. 

• Disability Insurance. 

• Laser Correction Discount. 

• Employee Discounts on appliances, apparel, and more. 

QUALIFICATIONS: 

• Mechanical skills to handle minor repairs and fixtures.  

• Knowledge of electricity to diagnose electrical problems and carry out minor repairs.  

• General maintenance skills.  

• Verbal and written communication skills for effective delivery of information.  

• Prior experience as a Service Technician or in a similar role.  

• HVAC, CMRP, or equivalent certification preferred.  

• Ability to stand for extended periods.  

• Ability to lift to 70 pounds without assistance.  

• Dexterity and attention to detail. 

The Building Engineer I is responsible for maintaining, operating, and troubleshooting building systems, including HVAC, plumbing, and electrical systems, focusing on performing routine maintenance tasks, responding to tenant requests, and ensuring systems operate safely under the guidance of senior engineers.

Essential Duties and Responsibilities:

• Perform scheduled maintenance, repairs, and inspections of building systems; address service requests, including hot/cold calls, plumbing issues, and lighting repairs.
• Troubleshoot minor equipment malfunctions and escalate issues as needed.
• Replace light fixtures, filters, and other components as required.
• Maintain accurate records of inspections and equipment performance.
• Interact with tenants, contractors, and property managers and work closely with senior engineers and technicians to support smooth building operations and resolve tenant issues.
• Assist with preventive maintenance tasks and contractor oversight.
• Conduct property inspections to identify deficiencies.
• Record equipment readings and ensure assigned building systems are operating according to standards.
• Follow company safety protocols and wear appropriate PPE; ensure compliance with OSHA, NEC, NFC, NFPA regulations; report safety hazards; participate in safety inspections.
• Provide guidance to junior Technicians when needed.
• Communicate verbally and in writing with teammates, leadership team, vendors, tenants, and client employees in a professional manner, keeping the appropriate customer(s) informed/updated as needed.
• Work closely with senior engineers to develop technical skills and participate in professional development programs to grow into advanced roles.
• Perform other duties as assigned.

Qualifications:

• HS Diploma or GED required
• Two to three years of job related experience or commensurate certification/trade experience
• CFC Certification preferred or willingness to obtain as requested; possess engineering and trade licenses required according to local, state, or national requirements
• Basic working knowledge of laptop and phone applications for work order and facility operation systems as well as basic skills with Microsoft Outlook
• Familiar with fire/life safety equipment/procedures
• Proven track record for delivering excellent internal and external customer service; ability to successfully interact/communicate with tenants/vendors/contractors as well as teammates and leadership team
• Familiarity with blueprints and code requirements
• Ability to work after hours, weekends, holidays, and during emergency situations as necessary to meet the needs of the client
• Possess competent knowledge of use and care of tools
• Ability to read and write English in order to understand manuals and procedures, and to write reports.
• Exhibit a willingness to develop familiarity with HVAC, electrical, and plumbing systems and gain experience with BAS operation and troubleshooting.

Physical Requirements:

Ability to stand, walk, climb ladders, and lift up to 50 pounds; perform physically demanding tasks such as stooping, crouching, and kneeling.

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 

This position is 100% in-office. The role requires working in office during standard business hours. Remote work or telecommuting is not an option for this position.

#IND123

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking an experienced and dynamic Lead Electrical Engineer to join our team in our Houston office. Reporting directly to the Electrical Engineering Manager, this role will be integral in developing detailed designs for electrical packages and contributing to the advancement of Venture Global’s Electrical Engineering Standards. The successful candidate will lead the electrical engineering discipline across various projects, ensuring the highest standards in quality, safety, and operational reliability.

Key Responsibilities:

• Lead electrical engineering projects and coordinate with multidisciplinary teams.
• Oversee the engineering and design team, ensuring deliverables meet quality, cost, and schedule requirements.
• Manage and forecast man-hour estimates, schedules, and total installed cost estimates based on project scope.
• Support the Technical Integrity function for electrical systems.
• Develop and implement HV, MV, and LV electrical systems and Protection Systems.
• Ensure compliance with industry codes, client requirements, and safety regulations.
• Drive innovation in modular, mid-scale plant designs to enhance efficiency.
• Provide technical guidance and mentorship to junior and senior engineers.
• Conduct power system studies and analysis, ensuring optimal system performance.
• Participate in front-end engineering, detailed engineering, request for proposal, and estimation activities.
• Review and approve designs, specifications, and contract documentation.
• Engage in procurement, construction, and commissioning activities.
• Conduct quality assurance reviews and verification of engineering deliverables.
• Lead troubleshooting efforts and provide solutions for electrical system challenges.
• Stay updated with the latest technological advancements in electrical engineering.

Qualifications & Experience:

Education & Certifications:

• Bachelor’s degree in Electrical Engineering , preferably with a focus on Power Systems.
• Professional Engineer (PE) License preferred.
• 15+ years of experience in electrical engineering, preferably in large-scale EPC projects.
• Oil & Gas industry experience is required, with a preference for LNG applications. Experience in petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing may be considered.

Technical Skills:

• Proven leadership in managing engineering teams and projects.
• Strong knowledge of HV substations, Ehouse, Switchgear and MCC design.
• Experience with:
• HV, MV, and LV systems
• Protection & Control Systems
• Single-line diagrams, schematics, and wiring diagrams
• Grounding, lighting, and cable routing designs
• Substation design and area classification per code requirements
• Power system studies and electrical calculations
• Fire alarm and HVAC control systems
• Familiarity with US LNG codes, standards, and regulations.
• Proficiency in ETAP power system software (preferred).
• Basic knowledge of SmartPlant Electrical and CAD software.
• Strong analytical, organizational, and problem-solving skills.
• Excellent communication and teamwork abilities.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking an experienced and dynamic Senior Electrical Engineer to join our team in our Houston office. Reporting directly to the Electrical Engineering Manager, this role will be integral in developing detailed designs for electrical packages and contributing to the advancement of Venture Global’s Electrical Engineering Standards. The successful candidate will lead the electrical engineering discipline across various projects, ensuring the highest standards in quality, safety, and operational reliability.

Key Responsibilities:

• Lead electrical engineering projects and coordinate with multidisciplinary teams.
• Oversee the engineering and design team, ensuring deliverables meet quality, cost, and schedule requirements.
• Manage and forecast man-hour estimates, schedules, and total installed cost estimates based on project scope.
• Support the Technical Integrity function for electrical systems.
• Develop and implement HV, MV, and LV electrical systems and Protection Systems.
• Ensure compliance with industry codes, client requirements, and safety regulations.
• Drive innovation in modular, mid-scale plant designs to enhance efficiency.
• Provide technical guidance and mentorship to junior and senior engineers.
• Conduct power system studies and analysis, ensuring optimal system performance.
• Participate in front-end engineering, detailed engineering, request for proposal, and estimation activities.
• Review and approve designs, specifications, and contract documentation.
• Engage in procurement, construction, and commissioning activities.
• Conduct quality assurance reviews and verification of engineering deliverables.
• Lead troubleshooting efforts and provide solutions for electrical system challenges.
• Stay updated with the latest technological advancements in electrical engineering.

Qualifications & Experience:

Education & Certifications:

• Bachelor’s degree in Electrical Engineering, preferably with a focus on Power Systems.
• Professional Engineer (PE) License preferred.

Experience:

• 15+ years of experience in electrical engineering, preferably in large-scale EPC projects.
• Oil & Gas industry experience is required, with a preference for LNG applications. Experience in petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing may be considered.

Technical Skills:

• Proven leadership in managing engineering teams and projects.
• Strong knowledge of HV substations, Ehouse, Switchgear and MCC design.
• Experience with:
• HV, MV, and LV systems
• Protection & Control Systems
• Single-line diagrams, schematics, and wiring diagrams
• Grounding, lighting, and cable routing designs
• Substation design and area classification per code requirements
• Power system studies and electrical calculations
• Fire alarm and HVAC control systems
• Familiarity with US LNG codes, standards, and regulations.
• Proficiency in ETAP power system software (preferred).
• Basic knowledge of SmartPlant Electrical and CAD software.
• Strong analytical, organizational, and problem-solving skills.
• Excellent communication and teamwork abilities.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Position Summary: 

Seeking a driven and motivated engineer to join our sales team focusing on growing business with existing customers and developing new business. This position will involve applications engineering, sales support and field service work. Sales Engineers should be comfortable working in a result-driven, fast-paced environment. 

Position will involve extensive formalized training plus work under a mentor, developing skills and gaining an understanding of CaptiveAire products, how we go to market, application engineering processes etc. as well as business development and sales strategies. This position will require some travel for training.

Why Work for CaptiveAire? 

• Nation’s leading manufacturer of commercial kitchen ventilation systems, and now offering a complete solution of fans, heaters, ductwork and HVAC equipment.  Our primary purpose is to provide fully integrated, sustainable HVAC Systems.
• Leader in the industry for over 40 years with innovative technologies, unmatched service, competitive pricing, and rapid lead times.
• Mission: to provide the highest quality products and service to our users at the lowest possible price
• Strong commitment to the development of our employees, including continuous education opportunities like sponsorship for Professional Engineering license and continuous education through weekly webinars and company developed technical videos 

What our employees have to say: 

There is never a day you don’t learn something new at CaptiveAire. I am able to learn something new due to the freedom to take on new tasks independently and problem solve. 

I love the mindset of continuous learning and pushing the bounds of your capabilities and knowledge. I love the people I work with and the  in-office environment.  I love how Captiveaire is all about connections, with customers, coworkers, end users, and everyone in between.  

One of the things I appreciate most about CaptiveAire is how strongly it embodies the entrepreneurial spirit. I’m empowered with the autonomy to manage my work independently, while also benefiting from the robust support and resources of a large, well-established company. 

CaptiveAire is fast-moving and no-nonsense. We operate differently than any other company that I've worked for with our decentralized structure. Quick action is taken when a good idea is presented. We are focused on end users where the rest of the industry is very short-sighted. We are on the front lines, actively changing the landscape of the HVAC industry. 

Learn more about CaptiveAire and our products here 

A Day in the Life: 

A technical sales role encompasses a wide variety of tasks where one day does not look exactly like the next. The projects our team handles are high in volume and unique from one another, spanning throughout the whole course of design, procurement, coordination, and post-sale support. 

Typical tasks include:

• Outside sales meetings and calls to build relationships with existing and new customers
• Application engineering to apply our products using sound engineering principles 
• Project management of installations in progress - Managing schedules/plans to guarantee we can get equipment on site when the site needs it, in turn creating satisfied and returning customers. 
• Service and technical support of existing equipment 
• Supporting end users to maintain high levels of customer service, from assisting contractors with wiring on site to remote troubleshooting for staff in the kitchen. 

Two to three full days per week in the office working on bids, one to two days on job sites, and dedicate another day to developing the territory. Territory development may include giving presentations to the engineering community, visiting new customers, or expanding contacts with an existing account.

Comments from some of our sales engineers:  

Every day I get to help someone. Whether it's an engineer with a design, a contractor with a troubleshooting issue, or an end user looking for help to obtain better indoor air quality. I get to use my engineering skills, people skills and business skills every day. 

Our main "role" is not to sell products but to provide solutions - kitchen ventilation solutions, commercial ventilation solutions, heating/air conditioning solutions. I enjoy getting to work directly with end users and helping them complete their business goals. Attending a soft opening after completing a full design-build project with an owner is rewarding. 

I love the balance between working on designs in the office and also having that face to face interaction with our customers. It's awesome to handle the design phase of a project, then also take charge of the procurement process with the end user/customer and lastly watch our equipment perform as designed once installed and the project is complete. I also love the growth aspect of my role, I enjoy molding and shaping our business in order to set it up for success and then see the value we are adding to the market. 

Primary Job Responsibilities: 

• Provide integrated application engineering and design support for a wide range of ventilation applications with the goal of providing sustainable products and the latest technologies best designed to meet the customers’ needs. 
• Work directly with Engineers, Contractors, End Users, and Food Service Dealers. 
• Daily tasks include inside sales support, application engineering and outside sales. 
• Responsibilities will vary and may include presentations, quotes, submittals, technical product support, job site visits and hands on troubleshooting as needed. 
• Educate and promote CaptiveAire products to users in your market.  This includes conference calls, meetings, organizing presentations, and product demos. 
• Research and develop new business opportunities with new and existing users. 
• Top notch customer service and willingness to go above and beyond to serve the customer. 
• Quick turnaround times a priority.  
• Continuously evaluate and improve processes as well as the customer experience. 

Required skills: 

• 0-5 years experience 
• 4 year technical degree in a mechanical, electrical, construction or science-oriented curriculum preferred 
• Excellent computer, organizational and communication/presentation skills 
• Problem solving with a passion for continuous learning 
• Strong desire to interface with the customer 
• Embrace new technologies and business savvy 
• Passion for work with aggressive nature to succeed 
• Willing to travel for various training opportunities 
• If not already completed, expectation of FE Exam completion in area of study for engineering graduates within 6 months of employment with CaptiveAire
• MUST BE A “GO GETTER”! 

Benefits: 

• Medical, dental and vision insurance 
• Disability & life insurance based upon election of medical insurance 
• 401k with employer match 
• Paid holidays 
• Paid time off (PTO) based upon tenure 
• Flexible spending account (FSA) 
• Tuition reimbursement, including for Professional Engineering (PE) License  
• Relocation assistance 

 
Salary: 

$70k-$100k base, negotiable dependent on experience, with additional monthly bonus based on productivity and profits.  

Captive-Aire Systems, Inc. is proud to be an equal opportunity workplace. We review applications for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, citizenship, age, uniformed services, genetic information, physical or mental disability, medical condition, marital status, or any other basis prohibited by law. 

To qualify, applicants must be legally authorized to work in the United States. At this time, we are not able to consider applicants that require sponsorship, now or in the future, for employment visa status. 

#P1

#LI-TL1

We are seeking a Senior Mechanical Engineering Manager with strong experience in structural analysis and mechanical systems validation to lead the mechanical design activities for the products deployed for our energy infrastructure and mission-critical projects. This is a product focused role—we need someone who can speak fluently about ensuring the structural integrity, mechanical reliability, safety and validate the thermal performance of equipment and supporting structures under static and dynamic operating conditions, ideally have experience with mission critical applications, and interface with project, commissioning and O&M engineering teams.

Key Responsibilities: 

• Perform structural stress and fatigue analysis for mechanical assemblies, enclosures, and supporting infrastructure used in ON.energy’s product offering.
• Lead and/or review Finite Element Analysis (FEA) models or reports to validate mechanical designs under static, dynamic, thermal, and seismic loading conditions.
• Ensure mechanical and structural safety under operational loads, transportation loads, vibration, and environmental conditions.
• Evaluate failure modes and recommend design improvements to enhance durability, reliability, and lifecycle performance.
• Collaborate with BESS, Power Electronics and Controls teams to ensure integrated system performance.
• Support development and review of mechanical documentation including calculations, reports, specifications, and as-built drawings.
• Experience designing heating, ventilation, and air-conditioning (HVAC) systems. Overall have experience with thermal design of enclosures e.g. calculations of HVAC, identification of temperature limits, humidity management and mitigation.
• Participate in product design sprints with the development team.
• Provide technical input during product design iterations based on lessons learned from project engineering design, installation, commissioning, and operations.
• Project management skills.
• Excellent communication skills across technical and non-technical teams.
• Willing to travel up to 20% for product FAT inspection and site commissioning witnessing.

Required Skills & Experience

• Bachelor’s degree in Mechanical Engineering or similar technical field.
• 15+ yearsof hands-on structural and mechanical engineering experience in project-based or industrial settings.
• Strong experience performing stress analysis, fatigue analysis, and vibration assessment.
• Demonstrated experience ensuring structural safety and compliance with applicable engineering standards and codes.
• Ability to interpret engineering drawings and develop detailed reports and calculations.

Preferred Experience:

• Experience with Power Electronics, UPS/mission critical applications or utility-scale infrastructure where mechanical system are applied.
• Panel building mechanical design experience for power and controls/IT equipment.

As a Stationary Engineer within Corporate Advisory & Solutions, you will be responsible for the continuous operation, monitoring, and maintenance of building systems, including HVAC, boilers, chillers, electrical, and plumbing systems. This role focuses on maintaining optimal system performance through routine inspections, preventive maintenance, and timely response to operational issues to ensure safe, efficient, and uninterrupted building operations.

Essential Duties and Responsibilities:

• Operate, monitor, and maintain central plant systems, including boilers, chillers, cooling towers, air handling units, and associated equipment
• Perform scheduled preventive maintenance, inspections, and repairs on building systems and equipment
• Monitor building automation systems (BAS) and equipment readings; adjust controls to maintain optimal performance and efficiency
• Respond to and troubleshoot system alarms, equipment failures, and tenant service requests, escalating complex issues as needed
• Maintain accurate logs of equipment operation, inspections, and maintenance activities
• Ensure all systems are operating within established parameters and in compliance with safety and regulatory standards
• Support start-up, shutdown, and seasonal changeover of mechanical systems
• Assist with contractor coordination and oversight for specialized repairs and maintenance
• Conduct routine building and equipment inspections to identify deficiencies and recommend corrective actions
• Replace filters, belts, and other system components as required
• Follow company safety protocols and wear appropriate PPE; ensure compliance with OSHA, NEC, NFC, and NFPA regulations; report hazards and participate in safety programs
• Communicate effectively with tenants, vendors, property management, and internal teams to support efficient operations
• Provide guidance and support to junior technicians as needed
• Participate in ongoing training and professional development to enhance technical expertise
• Perform other duties as assigned

Qualifications:

• High school diploma or GED required
• Two to three years of related experience in building operations or central plant systems, or equivalent trade/certification experience
• Stationary engineering experience preferred
• Relevant licenses or certifications (e.g., Stationary Engineer license, CFC/EPA certification) preferred or willingness to obtain as required by local/state regulations
• Working knowledge of HVAC, electrical, plumbing, and mechanical systems, with an emphasis on central plant operations
• Experience with building automation systems (BAS) and equipment monitoring
• Basic proficiency with computer systems, including work order platforms and Microsoft Outlook
• Familiarity with fire/life safety systems and procedures
• Ability to read and interpret blueprints, technical manuals, and code requirements
• Strong troubleshooting and problem-solving skills
• Proven ability to communicate effectively with tenants, vendors, contractors, and internal teams
• Ability to work flexible hours, including after-hours, weekends, holidays, and emergency situations as needed
• Knowledge of tools, equipment, and safe work practices

Physical Requirements:

Ability to stand, walk, climb ladders, and lift up to 50 pounds; perform physically demanding tasks such as stooping, crouching, and kneeling.

This position is 100% in-office. The role requires working in office during standard business hours. Remote work or telecommuting is not an option for this position.

#IND123

Title: Data Center Campus Critical Systems Coordinator II

The Data Center Campus Critical Systems Coordinator II will support multiple data center site teams in support of daily duties across all facets of mission-critical operations. The role will support day-to-day scheduling, asset management, advanced reporting, and extensive documentation.  This position reports to the Critical Systems Manager who supports all of the Americas.  There will be a limited amount (~10%) of travel to support various training and maintenance efforts.

Primary Responsibilities

• Ensure forward progression of maintenance plans – monitors PM schedules and follows up to avoid delays.
• Expanded asset management: Upload and maintain assets in CMMS/Asset Manager to ensure inventories and work assignments are properly aligned.
• Data quality and reporting: Audit maintenance data for accuracy and generate quarterly maintenance status reports (e.g. upcoming PMs, backlogs) for management.
• Assemble MOP templates for preventive and corrective maintenance activities, assess life safety ratings and arc-flash requirements, handle more complex or multi-step maintenance procedure documentation.
• This position will ideally be set in person 8-5 Monday-Friday at the Data Center and is a 24X7 availability requirement, but could work in a hybrid remote manner once acclimated

Knowledge, Skills & Abilities

• Advanced CMMS proficiency: Leverages advanced features of the CMMS for scheduling optimization and data analysis.
• Large data management: Capable of managing and analyzing larger volumes of maintenance data (e.g. multiple sites’ schedules) with spreadsheets or CMMS reports.
• Technical troubleshooting: Performs basic troubleshooting of system or network issues related to CMMS or equipment monitoring, resolving minor software or data problems.
• Solid understanding of power, fire and cooling asset lifecycles: Understands equipment life cycles and maintenance requirements; familiar with hierarchical asset structures in the CMMS.
• Cross-team coordination: Communicates effectively across facilities, ops managers, and vendors to align schedules and resolve conflicts.
• Mentoring ability: Guides junior Coordinators (Level I) in following processes; provides clear instructions and training in CMMS use.
• Enhanced reporting & documentation: Prepares and presents maintenance status reports or summaries to management, highlighting key issues or successes.
• Project coordination: Coordinates small projects such as CMMS updates, data cleanup efforts, or audit preparations – organizing tasks and timelines for system upgrades.
• Change management support: Assists in implementing process changes or new systems (training users, reinforcing procedures), helping the team adapt consistently.

Experience/Education

• High school diploma or GED (Associate’s degree or relevant data center certification preferred).
• Minimum 2 years of relevant work experience in mission-critical facilities or maintenance operations.
• Candidates who have professional experience managing data center maintenance schedules across multiple buildings or sites would make a candidate stand out.
• Advanced MS Office skills and data analysis capabilities (can create spreadsheets, charts, and track KPIs).
• Advanced software troubleshooting skills – independently resolves more complex scheduling or system issues (e.g. syncing CMMS data, addressing vendor conflicts).
• Familiarity with data center systems (electrical, mechanical, HVAC, fire suppression, BMS): understands how different systems tie into maintenance needs.
• Working knowledge of industry standards and best practices for critical facilities (uptime tiers, basic compliance requirements) – developing awareness.

About Us: HavenHub is at the forefront of transforming home services. As a next-generation company, we leverage cutting-edge technology and outstanding customer service to provide seamless solutions for homeowners nationwide. Join us and be part of a dynamic team dedicated to redefining the industry.

Job Overview: Are you a seasoned sales professional in turf, HVAC, roofing, or windows sales? Looking for an opportunity with a pioneering organization? As a Home Solutions Design Specialist (HIS Licensed), you'll play a pivotal role in helping clients realize their dream outdoor spaces or upgrading their homes with energy-efficient solutions, all while earning substantial rewards for your expertise.

Responsibilities:

1. Design Expertise: Provide tailored landscape solutions and expert advice for HVAC, roofing, or window installations.
2. Product Sales: Promote our premium, eco-friendly products, showcasing their value to customers.
3. Creative Visualization: Help clients visualize their ideal landscapes or home upgrades using your creative skills.

Why Join Us:

• Lucrative Rewards: Earn generous commissions on every successful deal closed.
• Reputation for Excellence: Join a company renowned for its stellar 5-star customer reviews.
• Industry Leadership: Be part of the market leader in delivering high-quality solutions.
• Work-Life Balance: Enjoy autonomy without micromanagement, warm leads provided, and top-tier training across various industries.
• Warm Appointments: We can provide up to 10-15 high-quality appointments to the right sales professional each week through our expansive digital marketplace. We’re committed to delivering top-tier, qualified leads to ensure your success and help you thrive. Ready to elevate your sales career? Submit your details today and start succeeding with us!

Duties:

• Attend scheduled appointments and participate in weekly team meetings.
• Develop in-depth knowledge of our products and services.
• Provide accurate on-site quotes and assist with installations.
• Manage the full sales cycle, from lead generation to closing deals.
• Design personalized landscapes and ensure contracts are handled efficiently.
• Flexibility to work from home or the office.

Ideal Qualifications:

• HIS Licensed (highly preferred).
• Experience in artificial turf or landscaping is preferred.
• Excellent communication skills and punctuality.
• At least 1 year of outside sales experience, preferably in Home Services.
• Experience with ServiceTitan is preferred.
• Highly organized with the ability to manage a full calendar.
• Access to reliable transportation.

Job Type: Full-time 

Compensation: Competitive commission structures with earning potential ranging from $100,000 to $250,000+ per year.

If you’re ready to join a cutting-edge company and take your sales career to the next level, apply today!

Check out our HavenHub Careers Page: https://havenhub.com/careers/

HavenHub is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.