Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost

We are currently looking for qualified candidates for a Mechanical Engineer position. Will require experience with process equipment systems, in a manner in which equipment is operated, safety system design and compliance codes, and with facility troubleshooting as related to oil and gas production. 

Responsibilities:

• Perform job responsibilities as Lead Engineer, leading discipline on medium projects or assigned under the direction of the Department Manager and/or Project Engineer for larger projects
• Ensure adherence to project specifications, governing codes and standards, and good engineering practice
• Ensure adherence to project health, safety, security and environmental (HSSE) requirements as well as state and federal regulations
• Monitor the schedule, ensure that project objectives are met, monitor project controls and engineering execution within the approved budget
• Responsible for reporting on engineering, design and equipment development status to the Lead Mechanical Engineer, and performing monthly or bi-weekly assessments of progress
• Participate and contribute advanced level development of all phases of project engineering, including detail design and construction support
• Experience in development of upstream production facility drawings, checking process equipment system designs and participation in hazard reviews performed to API
• Develop the technical content of Mechanical equipment calculations, specifications and data sheets for inquiry and purchase. Ensure these documents are appropriately reviewed, approved, and transmitted
• Has direct communication with equipment manufacturers and works clarifications to resolution.
• Typical equipment includes Vessels, Heat Exchangers, Fired Equipment, HVAC, Pumps, Compressors.  General knowledge of applicable codes and standards.
• Procedure development including start-up, commissioning, operating and maintenance.
• Coordinate and incorporate project requirements and standards.
• Develop Mechanical Work Plans for the installation of equipment
• Initiate Project Deviation Notices that impact the mechanical specifications, effort-hour budget and/or schedule
• Coordinate and cooperate with the Engineers of other disciplines to ensure the smooth flow of all information, and to ensure alignment with project requirements and design basis
• Initiate and runs status meetings with the mechanical team to discuss project issues, coordinate/plan key milestone efforts, etc.
• Responsible for obtaining cost related information and developing scope of work documents for project estimates (e.g., TIC estimates)

Qualifications:

• Bachelor’s degree or Master’s degree in Mechanical Engineering from an accredited college or University
• 5+ years of overall experience on capital projects from feasibility through construction
• Familiarity with various project phases and the scope/deliverables required
• Advanced MS Office skills (Word, Excel, OneNote) preferred
• Excellent oral and written communication skills in English required
• Registered Professional Engineering license preferred
• Ability to train and travel to live facilities preferred

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. 

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a talented civil engineer to join our team who will produce engineering documents for the site preparation, grading, drainage, roads, and paving for our facilities.  This position will serve multiple roles with the goal of ensuring efficiently produced high quality civil engineering documents for our projects. The ideal candidate should be efficient, detail oriented, and able to keep track of multiple tasks with separate deadlines.

This position will report to the Civil Engineering Manager. This position is located in our Downtown Houston office and is a Monday-Friday in-office position.

Key Responsibilities:

• Develop calculations, quantities, reports, drawings, and specifications for the civil sitework scope of engineering of the project.  Seal and sign the final civil engineering documents.
• Collaborate with and support other disciplines, subconsultants, project controls, project management, and others
• Perform all functions within the civil engineering and design team as needed to create examples or meet deadlines

Qualifications:

• Bachelor's degree in Civil Engineering
• 2 to 5 years of relevant experience
• Sufficient experience and knowledge with oil, gas, and chemical facilities and preferably within an EPC company
• Skill in oral and written communication

Software Knowledge:

• AutoCAD
• Experience using a graphically to-scale integrated hydrology and hydraulics site drainage software such as EPA SWMM, PCSWMM, Storm and Sanitary Analysis (SSA), or InfoDrainage.
• Autodesk Civil 3D (preferred but not required)

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. 

What You'll Do

As a Power Generation Engineer at Giga, you own the engineering, reliability, and performance of the generation assets that keep our sites alive. You'll design systems, diagnose failures, lead commissioning, and work directly with Operations to ensure our facilities never go dark. In a company where uptime is everything, you are part of the last line of defense — and we need you to be the kind of engineer who takes that seriously. You'll work with autonomy in a fast-moving environment, manage vendors and contractors, and build robust generation infrastructure from the ground up.

Where You'll Work

We're onsite because generation engineering is a physical discipline. Solving problems in real time requires being in the room — or on the pad — where equipment lives. You'll be based out of one of our core sites and expected to travel to others as projects demand.

Responsibilities

•   Own the design, specification, and engineering of power generation systems — including gas turbines, diesel generators, and hybrid configurations — from concept through commissioning.
•   Serve as the technical authority for generation assets on site: monitor performance, investigate anomalies, and drive corrective action before issues become outages.
•   Develop and own electrical design packages: single-line diagrams, load flow studies, short-circuit analyses, and protection coordination.
•   Build and maintain preventive and predictive maintenance programs; track reliability metrics (availability, MTBF, MTTR) and use data to drive continuous improvement.
•   Lead commissioning activities including SAT, FAT, and integrated system testing for new generation assets.
•   Develop and implement SCADA and control system strategies for real-time generation monitoring and management.
•   Manage vendor and contractor relationships through procurement, installation, and ongoing O&M; hold them accountable to Giga's standards.
•   Coordinate with utilities and grid operators on interconnection requirements, capacity reservations, and compliance obligations.
•   Ensure all generation activities comply with applicable codes and standards (NEC, NFPA 70E, IEEE, NERC) and champion electrical safety across the team.
•   Identify opportunities to improve system efficiency, reduce fuel costs, and increase generation reliability; build the case and drive implementation.

Requirements

•   5+ years of experience in power generation, utility, or industrial power systems engineering.
•   Bachelor's degree in Electrical Engineering, Power Systems Engineering, or a closely related field.
•   Deep hands-on knowledge of generator controls, paralleling switchgear, automatic transfer systems, and HV/MV electrical systems (up to 34.5 kV).
•   Proficiency in power systems analysis software (ETAP, SKM PowerTools, or equivalent).
•   Demonstrated ability to own generation assets through their full lifecycle — from design and commissioning to long-term O&M.
•   Strong problem-solving skills with the ability to diagnose complex generation issues under time pressure.
•   Clear communicator who can work across Engineering, Operations, and external stakeholders without losing technical accuracy.

Bonus Points

•   Professional Engineer (PE) license.
•   Experience with microgrids, combined heat and power (CHP), or behind-the-meter generation systems.
•   Familiarity with renewable integration including solar, BESS, or wind in a generation stack.
•   Background in data center, crypto mining, or other high-demand, always-on power environments.
•   Project management experience on EPC or capital projects with generation scope.

Benefits

•   Competitive base salary, reviewed annually against market.
•   Performance-based bonus tied to site and company outcomes.
•   Full health, dental, and vision coverage for you and your dependents.
•   401(k) with company match.
•   Generous PTO and flexibility for the times when you need to recharge.
•   Professional development budget — including support for PE licensure and continuing education.
•   The opportunity to build generation infrastructure at a scale and speed that doesn't exist anywhere else.

Location- United States, Remote with up to 75% travel

Position Summary

ON.energy is looking for a skilled Supplier Quality Engineer to support the supplier quality activities related to battery energy storage systems (BESS) across the full equipment lifecycle—from procurement and factory testing to site delivery and installation. In this role, you will work closely with engineering, supply chain, and construction teams in the processes of selecting, auditing and evaluating suppliers, reviewing vendor’s Inspection and Test Plans, coordinating and witnessing Factory Acceptance Testing (FAT), and provide field support during installation and commissioning for key components including batteries, inverters, transformers, switchgear and ATS, and auxiliary systems. This role focuses on preventing quality issues at the source – ensuring suppliers maintain robust manufacturing and test processes – and tracking non-conformances through resolution prior to shipment. 

This role is best suited for engineers with hands-on experience working with manufacturing suppliers of electrical or industrial equipment. The role focuses on suppliers manufacturing critical electrical equipment used in utility-scale energy storage systems.

Key Responsibilities

• Drive Supplier Selection, Evaluation and Qualification based on the company’s Supplier Quality processes and tools.
• Support the definition and documentation of Supplier Quality processes in compliance with ISO 9001 and other applicable requirements.
• Perform supplier process audits at new and existing vendors to evaluate manufacturing processes, production controls, and supplier quality systems in alignment with company standards and ISO 9001 requirements.
• Ensure all activities related to the Supplier Audit process are properly maintained and executed, including the Audit Planning and Reporting documentation.
• Update the supplier quality database (Documents Control).
• Management of supplier related quality issues, guiding the root-cause analysis and implementation of corrective actions and process improvements, ensuring effective and sustainable solutions are in place.
• Review and approve supplier quality documentation, including Inspection & Test Plans (ITPs), FAT procedures, Control Plans and / or quality control documentation packages.
• Participate in Factory Acceptance Tests (FATs) at OEM and ensure test results and documentation meet approved criteria.
• Identify, log, and track non-conformances (NCRs); drive timely root cause analysis and corrective actions with vendors.
• Review and validate supplier material traceability records, certificates, and inspection reports.
• Collaborate with Engineering and Supply Chain to qualify new vendors and support supplier onboarding.
• Provide supplier performance feedback and input to quality metrics and supplier scorecards.
• Maintain complete, accurate, and traceable quality documentation packages for each project.
• Support development and continuous improvement of quality standards, templates, and best practices across equipment types.
• Evaluate supplier manufacturing processes and production controls to ensure suppliers can consistently meet technical and quality requirements.

Must Have Qualifications

• Bachelor’s degree in Electrical, Industrial, or Quality Engineering (or a closely related technical field)
  or equivalent hands-on experience working with electrical equipment and systems in a manufacturing or industrial environment
• 3-7 years of experience in supplier or product quality engineering within the energy or manufacturing industry
• Hands-on experience with electrical power systems, BESS, inverters, transformers, switchgear, or other similar equipment 
• Experience with supplier process audits including evaluating supplier manufacturing processes (VDA 6.3 or similar process audit frameworks are a plus)
• Working knowledge of quality management systems (ISO 9001) and manufacturing quality tools (8D, SPC, PFMEA, control plans, FAI / PPAP)
• Familiarity with relevant codes and standards (IEEE 1547, UL 9540/9540A, IEC, ISO 9001, NEC) and general equipment test protocols.
• Strong analytical and problem-solving skills with a practical understanding of manufacturing processes
• Willingness to travel (up to 75%) to vendor locations (domestic and international) and project sites
• Excellent communication and documentation abilities; capable of interfacing effectively with suppliers and cross-functional teams

Preferred Qualifications

• Experience with Tier 1 energy equipment manufacturers
• CQE (Certified Quality Engineer) and ISO 9001 Lead Auditor certification.
• Familiarity with quality management tools, NCR tracking tools, and dashboard reporting.
• Experience supporting supplier quality activities during New Product Introduction (NPI).

Your Opportunity

Scion is paving a path in student living and the Facilities Manager is a keystone team member in the execution of our vision. This position ensures safety and functionality of the property’s buildings and equipment and ensures optimal service is carried out by the onsite Facilities team and any third-party vendors.

The Facilities Manager is a subject matter expert and experienced leader who excels in a fast-paced, agile, collegiate environment. This role demands superior problem solving, leadership and unwavering follow through. Those in the Facilities Manager position may also be asked to assist other properties.

Your Benefits

• FLSA Status Exempt
• Discretionary annual bonus
• Paid Time Off + Floating Holidays
• Health Insurance
• Dental Insurance
• Vision Insurance
• 401k Matching
• Paid Parental Leave
• Learning reimbursement opportunities

Your Responsibilities 

• Manage all building services and preventative maintenance programs to the best of industries practices, the Scion’s Standard Operating Procedures, and in compliance with the State/Federal Govt./OSHA’s Codes/regulations.
• Manage the day-to-day operations including but not limited to heating, ventilating, air conditioning (HVAC), plumbing and piping, fire protection, and general building maintenance and troubleshooting, building automation systems and building maintenance
• Monitor systems and provides diagnostics, preventative maintenance, annual testing, permitting, certification for all major building systems including, but not limited to: chilled water systems with fan coil units, air handling units with outside condensers including roof top units (RTU), building stationary boilers, hot & cold water distribution systems (plumbing, pressure/pneumatic/storage tanks, variable frequency drive (and pumps & motors), domestic hot water heaters, building automation systems (BAS), electrical distribution systems, switchgears and controls, generators, uninterrupted Power supply (UPS), elevators and lifts, parking structures (ventilation/drainage Systems, T-Joints), entrance & exit Gates and overhead doors, shingled/tarred roof, TPO membrane roofing system, EIFS, brick, vinyl, & cementitious sideboard, ACP, curtain walls, insulated glass units (IGUs).
• Operate and manage all life safety systems including fire pumps, fire alarm monitoring panels, dry/wet sprinkler systems, visual and audible alarms, back flow preventers, smoke detectors, CO2 sensors/alarms, fire extinguishers, emergency lighting, means of egress, fire
• Prioritize and schedule maintenance work, assuring quality of work consistent with Scion’s standards.
• Manage the Facilities Technicians to ensure all service requests are completed within Scion standards and are appropriately and accurately
• Manage facilities budgets.
• Review completed work to verify conformance to standards or repair
• Ensure all emergency, routine maintenance/repairs are carried out in a timely and professional manner.
• Ensure all Preventive maintenance is carried out in a timely and professional manner.
• Respond promptly and effectively to all safety/risk-management-related issues at the
• Review completed work orders for accuracy of labor hours, materials’ cost, and track recurring equipment failures.
• Conduct regular inspection tours of buildings, interior common areas and the exterior of the property, equipment and surrounding grounds for deficiencies, potential safety, health, or code problems and necessary
• Prepare written reports summarizing findings, and advises other building users as appropriate, of the
• Provide recommendations for dealing with problems noticed in
• Oversee and supervise “Turn” preparation including the prompt inspection of vacated units, makes appropriate repairs and charges, and ensures completion as
• Inspect vacant units after repairs and maintenance have been completed to determine quality of work performed and readiness for
• Manage the maintenance spare parts and the tools inventory, determining which parts/tools to stock and their stock level and working directly with General Manager to maintain inventory of parts, tools, and supplies within
• Maintain shop appearance and all mechanical, supply, electrical and storage facilities on
• Ensure proper maintenance of equipment to ensure warranty compliance and extended useful life.
• Oversee all other contracted work in the building, obtaining bids and negotiating prices with vendors and contractors, as approved by the General Manager, Regional Manager or the Regional Facility Manager.
• Coordinate deliveries, schedules, and performance of all facility related
• Ensure proper safety procedures are followed, personal protective equipment is used, and health & safety policies are
• Manage process for keying and coring/coding of locks and maintain lock procedures, logbooks and protocols for key management and
• Effectively implement standard operating procedures and preventive maintenance programs according to Scion’s
• Take part in emergency preparedness planning and acts as essential personnel in
• Escalate unique or urgent repairs/replacements to General Manager and Regional Facilities Manager.
• Maintain records on all major systems including maintenance manuals, manufacturer’s cut sheets, warranties, and equipment
• Work closely with the General Manager and Regional Facilities Manager to manage, formulate and track facilities and capital
• Hire, train and develop Facilities team members, holding them accountable for delivering a high level of

The responsibilities listed above may not be all-inclusive.

What We Require

• High school diploma/GED, trade school diploma, or military training
• 8 years of relevant experience managing building system in multi-unit residential properties, 5 years of supervisory experience
• 5 years’ experience with building automation systems, and life safety systems
• EPA 608 Universal certification
• HVAC/EPA 608 Universal certification
• Certified Pool Operator (CPO), or intention to obtain within six months
• Expertise in plumbing, HVAC, electrical and mechanical systems as well as generally accepted maintenance practices
• Boiler operator or Stationary Engineer Certificate/License
• Ability to read and interpret documents such as design drawings, blueprints, safety guidelines, operating and maintenance instructions and procedural manuals
• Ability to manage multiple projects simultaneously, set priorities and meet deadlines
• Basic computer working knowledge, including Microsoft Office and CMMS
• Valid driver’s license
• Ability to stand 8 hours or longer per day and lift up to 100 lbs. as necessary

 Operational Details

• Job location is at the assigned property. May be required to travel periodically.
• Serves in an “on-call” capacity, except during approved PTO periods.

The Scion Group LLC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, religion, creed, national origin, color, gender, sex, sexual orientation, gender identity or expression, age, physical or mental disability (as long as the employee/applicant is otherwise qualified for the job with or without a reasonable accommodation), genetic information, HIV/AIDS status, marital status, uniformed service, veteran status, pregnancy or other legally protected status or category under federal or state law. The Scion Group LLC complies with applicable state and local laws governing nondiscrimination in employment in all locations in which the Company has properties. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation, training and other terms and conditions of employment. The Scion Group LLC is committed to the principles of equal employment opportunities.

IND2 #wearehiring #werehiring

We’re looking for a Senior Controls Engineer with project-based engineering experience to lead network-and-controls-related hardware product design, documentation, project-specific technical compliance and support the development activities related to these products. This is a product focused role—we need someone who can speak fluently about both network architecture and industrial control systems, ideally have experience in mission critical applications, and interface with IT, software, project, commissioning and O&M engineering teams. 

Key Responsibilities: 

• Support the business development team by providing technical proposals e.g. network diagrams that meet the customer’s needs.
• Collaborate across control systems, SCADA, and IT teams to ensure complete and secure connectivity
• Integrate and support industrial protocols like Modbus, DNP3, and OPC-UA
• Compile product technical information packages for the project engineering team.
• Co-lead review and validation of network/controls product-related topics during the project execution phase. 
• Maintain technical documentation including as-built drawings
• Support product development by capturing design improvement feedback from the different project phases: design, commissioning and O&M.
• Support product development by recommending design approaches and vendors of the main equipment.
• Participate in product design sprints with the development team.
• Participate in the product’s commissioning phase. 

Required Experience

• Bachelor’s degree in Controls Engineering, Electronics Engineering, or similar technical field.
• 8+ years of hands-on controls engineering experience in project-based or industrial settings.
• Proven experience in project network deployments, not just operations
• Strong grasp of protocols (TCP/IP, BGP, OSPF, VLANs, VPNs)
• Familiarity with control systems and operational technology (OT)
• Ability to produce and read network and control architecture drawings
• Excellent communication skills across technical and non-technical teams.
• Willing to travel up to 20% for product FAT inspection and site commissioning witnessing. 

Preferred Experience

• Certifications: ISA CAP/CCST, Rockwell, Siemens, Schneider or similar
• Experience with BESS, SCADA, EMS, Safety Systems or utility-scale infrastructure
• Background in energy, utility, or data center environments 

We’re looking for a Senior Compliance Engineer with deep expertise in regulatory requirements, codes, and certification processes applicable to BESS, power electronics, and electrical distribution systems e.g. panelboards, switchboards, etc.. This is a product-focused and cross-functional role responsible for ensuring that our systems meet all applicable North American and international standards, as well as ISO/RTO interconnection and market requirements. You will serve as the internal authority on compliance, working closely with product, R&D, and project engineering teams to ensure designs are certifiable, deployable, and aligned with evolving regulatory frameworks.

Key Responsibilities:

• Lead compliance strategy and execution for BESS, DC cabinets, inverters, and related power, controls /IT equipments.
• Interpret and apply standards such as UL, CSA, IEEE, IEC, and NFPA to product and project designs.
• Act as the subject matter expert on ISO/RTO regulatory requirements (e.g., interconnection, grid codes, testing protocols).
• Define and manage certification roadmaps for new and existing products.
• Coordinate and support product testing and certification activities, including UL listings, field evaluations, and special inspections.
• Develop and maintain with Technical Writer compliance documentation, including test plans, reports, and certification packages.
• Work directly with NRTLs and certification bodies to facilitate approvals and resolve technical issues.
• Support engineering teams by ensuring designs meet code and standard requirements from early development stages.
• Review and validate test procedures and results, including electrical, thermal, environmental, and safety testing.
• Support project teams during AHJ reviews, permitting, and commissioning, addressing compliance-related questions.
• Monitor and interpret regulatory changes and emerging standards, ensuring proactive alignment of products.

Required Skills & Experience:

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or related field.
• 10+ years of experience in compliance, certification, or regulatory engineering for BESS, power electronics, or industrial electrical systems.
• 4+ years experience with working knowledge of key standards, including:
  • UL (e.g., UL 9540, UL 9540A, UL 1741, UL 508A)
  • CSA standards for electrical equipment
  • IEEE standards related to power systems and interconnection
  • IEC standards for international compliance
  • NFPA (e.g., NFPA 855)
• Deep understanding of test procedures and certification processes, including safety, thermal runaway, environmental, and performance testing.
• Familiarity with ISO/RTO requirements (e.g., ERCOT, PJM, CAISO, MISO) and grid interconnection standards.
• Experience working with NRTLs (e.g., UL, CSA, Intertek) and managing certification programs.
• Ability to interpret and apply codes, standards, and regulatory language into practical engineering requirements.
• Strong communication skills across engineering, regulatory authorities, and external certification bodies.
• Project Management skills.

Preferred Experience:

• Experience with utility-scale and/or C&I BESS deployments.
• Direct involvement in UL 9540A fire testing, LSFT or similar safety validation programs.
• Knowledge of utility -scale inverter compliance requirements.
• Experience supporting permitting and AHJ engagement in the U.S.
• Background in quality systems or regulatory audits.

The Sales Engineer will lead the technical-commercial strategy connecting ON.energy’s business development, engineering, and customer teams. This role oversees the delivery of advanced Battery Energy Storage System (BESS) and power infrastructure solutions for hyperscale data centers, industrial operations, and utility-scale clients. The ideal candidate combines deep expertise in energy systems and data center electrical infrastructure with leadership experience in consultative sales, solution design, and project development—driving both customer success and business growth.

As a Sales Engineer at ON.energy, you will:

Technical Pre-Sales

• Lead technical engagements with clients to define system architecture, sizing, and performance requirements for BESS and data center power systems.
• Develop conceptual and detailed design proposals, single-line diagrams, and equipment specifications.
• Support proposal development by preparing technical documentation, cost estimates, and performance simulations.
• Translate customer requirements into system configurations optimized for performance, cost, and reliability.

Commercial and Client Interfacing

• Partner with business development and executive teams to define bid strategies and technical differentiators.
• Deliver technical presentations and system demonstrations to key stakeholders, including C-level executives, engineers, and procurement teams.
• Participate in RFP/RFQ responses, ensuring all technical deliverables meet client specifications.
• Support contract negotiations by clarifying technical scope and validating cost structures.

Internal Collaboration

• Work closely with engineering, project management, and procurement teams to ensure seamless project handoff and delivery.
• Provide feedback to the product and engineering teams regarding customer needs and emerging market trends.
• Assist marketing and product management with content and case studies demonstrating the value of ON Energy’s solution.

Requirements

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or related discipline.
• 7+ years of experience in managing technical sales, applications engineering, or solution engineering within the BESS, renewable energy, or data center industries. Strong understanding of battery storage systems (lithium-ion preferred), inverters, switchgear, and controls.
• Knowledge of data center electrical infrastructure including UPS systems, backup generation, and critical power distribution.
• Proficiency in interpreting electrical drawings and system schematics.
• Excellent communication and presentation skills for both technical and executive audiences.

Preferred

• Master’s degree in Engineering, Energy Systems, or Business Administration.
• Familiarity with Procore, AutoCAD, or electrical modeling tools (ETAP, HOMER, or similar).
• Experience with EPC or IPP project development processes.
• Understanding of interconnection, permitting, and grid compliance requirements.

Competencies

• Analytical problem-solving with strong attention to detail.
• High commercial awareness and ability to translate technical value into business outcomes.
• Strong sense of ownership and accountability in a fast-paced environment.
• Cross-functional collaboration mindset and ability to interface with engineering, finance, and legal teams.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s three Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. 

We are seeking a Senior Project Engineer, Electrical  to join our team in the site project engineering team in Houston, TX

The role will be part of a team responsible for ensuring that the Plant Electrical System operates as per design, in a safe and reliable manner with minimal downtime.  

 Responsibilities: 

• Interface for all site switchgear, power controls technical alignment
• Provides input to weekly site engineering report
• E-house / power systems RFI Owner
• Inspect major arriving equipment and participate on walk downs
• Maintain log of scope transferred to site and participate in interface meetings between EPC and OFE contractors
• Assist with E-House FAT testing at the supplier's shops and minimize carryover punch list to the site prior to shipment.
• This position reports to the CP2 Project Engineer Manager (Electrical Buildings)

Education, Qualifications & Experiences: 

• Bachelor’s degree in Electrical Engineering, preferably with specialization in Power Systems.
• Minimum 10 year’s experience working with electrical systems.
• Experienced with domestic and/or International electrical codes and standards. Including NEC, NFPA, NETA, and ANSI
• Familiarity with Power Systems Modeling Tools such as ETAP/SKM preferable
• Experience in LNG liquefaction facilities highly preferred.
• Experience with: 

• • Switchgears (13.8kV, 4.16kV, 480V)
  • Motor Control Centers (MCC)
  • Uninterruptible Power Supplies (UPS)
  • Transformers
  • Energy Management Systems (EMS/SCADA)
  • Electrical System Studies 

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Senior I&C Engineer located in Houston, TX.

General Description:

TheSenior I&C Engineer, with guidance from the Automation Director, is responsible for leading the engineering, development, and maintenance of the Control systems associated with Venture Global’s system of pipelines. The primary responsibility is Turbine Controls but may have some overlap with balance of plant systems.

This role will have a significant impact with development of new projects and pipeline systems, and will have a role in specifying and reviewing engineering deliverables pertaining to turbine control systems.  Knowledge of interstate pipeline systems and regulations also preferred.

Responsibilities:

• Technical leadership for engineering efforts with gas compression control systems;
• Technical leadership for engineering efforts with balance of plant control systems;
• Provide mentorship for junior engineers to promote understanding of control systems;
• Provide support to field technicians with control system troubleshooting;
• Provide technical expertise in programming GE Mark Vie DCS systems;
• Coordinate or develop efforts to backup, maintain, and version manage configuration and program files;
• Coordinate computer backup of machines in the plant environment;
• Provide project management support for control systems changes and specifications

Qualifications:

Education and Certifications:

Education:

• Bachelor’s degree in Engineering or other technical discipline. Experience may be considered in lieu of a degree

Experience:

• 5+ years of experience in I&C engineering roles;
• 5+ years of experience supporting turbine control systems;
• 5+ years of experience commissioning control systems;
• Working knowledge of a variety of industrial communications protocols;
• Working knowledge of IT and OT systems supporting control systems;
• Expeirence with long haul interstate pipeline systems;
• Knowledge of computer networking in a plant environment

Skills:

• GE Mark VIe programming and troubleshooting experience required;
• Experience with high speed turbine data acquisition preferred;
• Experience programming Rockwell and Allen Bradley products preferred;
• Experience with configuring and troubleshooting industrial communications protocols such as:
  • Modbus;
  • Device Net;
  • MQTT;
  • Ethernet / IP;
  • Serial RS232/485
• Experience with configuration and troubleshooting of local HMI systems;
• Experience preferred configuring and troubleshooting third party communications devices such as Red Lion, Pro Soft, among others;

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Associate Engineer, Instrument & Controls to join our team in Houston, TX

This role reports to the Manager of Instrumentation and Controls.

The role will be part of the team responsible for ensuring that the Plant Instrumentation and Control Systems operate as per design, in a safe and reliable manner with minimal downtime. 

Responsibilities: 

• Candidate will develop knowledge and understanding of the complete Plant Instrument and Control system equipment and will be assigned tasks including but not limited to:  

• • Field Instrumentation for process measurement (e.g., Pressure, Temperature, Level, Flow, etc.)  Control Valves, Shutdown Valves (Air, Gas, and Motor Operated), Analyzers (H2S, Moisture, etc.) Gas Chromatographs, Flow Metering Systems (Ultrasonic, Coriolis, Differential Pressure, etc.) and their transmission systems (e.g. 4-20mA, Hart, etc.).
  • Plant Instrumented Control and Safety Systems, Fire and Gas Systems, and Programmable Logic Controllers.
  • Schematic drawings, location drawings.
  • Support the development of:  
  • Field instrumentation specification and data sheets
  • Key Performance Indicators & Metrics for Instrument and Controls
  • Instrument control drawings and databases.
  • Instrument Requisition and Technical Evaluation.
  • P&IDs
  • Support with the Management of Change (MOC) process
  • Support Root Cause Failure Analysis (RCFA) process 

Qualifications: 

• BS. or higher degree in Electrical, Electronics, or Computer Engineering, preferably with specialization in Process Control, Control systems, and Instrumentation.
• One (1) to four (4) years’ experience working as an Engineer in a process plant environment would be a plus. 

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. 

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

Position Summary:

The Product Service Engineer will be a critical role within the Owner Furnished Equipment (OFE) Product Service Organization. The Engineer will be a Subject Matter expert and lead the timely and quality resolution of technical issues and drive strategic initiatives to optimize performance critical to the performance and operation of Venture Global Equipment. This role will involve coordinating and collaborating with various stakeholders, including Operations and Engineering teams and equipment suppliers, to ensure the timely and efficient resolution of technical solutions.

Key Responsibilities:

• OFE Management:
• Define and manage key performance indicators (KPIs) to measure the effectiveness of OFE management.
• Develop and implement comprehensive processes and strategies for the management of technical solutions throughout the project lifecycle of OEM equipment.
• Coordinate with Operations and Engineering teams to identify and define technical issues and work with equipment suppliers to effectively resolve and implement solutions to ensure that OFE specifications and requirements are met.
• Oversee Root Cause Analysis and implement Preventative and Corrective Actions to ensure long-term resolutions.
• Risk Mitigation:
• Proactively identify and assess potential risks associated with the operation and maintenance of equipment.
• Develop and implement risk mitigation plans to minimize the impact of potential issues.
• Collaborate with project and operational teams to adequately address OFE-related risks.
• Stakeholder Coordination:
• Build and maintain strong relationships with operational and engineering teams, equipment suppliers, and other relevant stakeholders.
• Facilitate effective communication and collaboration among team members to ensure project success.
• Resolve conflicts and address issues related to OFE delivery and management.
• Performance Monitoring:
• Track the performance of OFE delivery and management processes using data analytics.
• Identify areas for improvement and implement corrective actions to optimize performance.
• Prepare regular reports on OFE performance and status for senior leadership.

Qualifications:

• Bachelor’s degree in engineering or a related field.
• 15+ years of experience
• Understanding of the LNG industry and related equipment.
• Strong leadership, communication and interpersonal skills.
• Excellent problem-solving and decision-making abilities.
• Proven ability to manage complex projects and meet deadlines.
• Program and/or project management skills with a working knowledge of project management software (e.g., Primavera P6, Microsoft Project).

Preferred Experience:

Experience in one or more of the following areas or with specified equipment is desired:

• General design, application, operational reliability, and servicing of Advanced Control Systems for gas turbine-based power applications such as combined cycle or simple cycle power plants or mechanical drive applications.
• Specific experience with GE Vernova’s Mark VIe control system software and hardware
• Understanding of advanced control and sensor applications for operational flexibility, RAM optimization, and data collection for general equipment health monitoring, for diagnostics and prognostics, and general optimal plant operation.
• Familiarity with GE Vernova’s LM2500/LMX or similar aeroderivative gas turbines, GE Vernova’s 7EA Gas Turbine and associated equipment, or Baker Hughes gas turbine products specifically their M35 Gas Turbine.
• Product Service with understanding of product Service workflow, tools and processes including root cause analysis.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a Senior Engineer, Instrument & Controls to join our team in Houston, TX

This role reports to the Manager of Instrumentation and Controls.

The role will be part of the team responsible for ensuring that the Plant Instrumentation and Control Systems operate as per design, in a safe and reliable manner with minimal downtime. 

Responsibilities:

• Apply technical expertise to support design, installation, commissioning, and operation of instrument and controls systems as subject matter expert.
• Troubleshoot and solve controls logic and communication issues.  
• Participate in check out of cause and effects, complex loops, etc.

Qualifications:

• Education and Certifications: 
• Minimum Bachelor’s degree in Controls, Instrument or Electrical Engineering
• A Professional Engineering License or eligibility for registration. 

• Experience: 
• A minimum of five-ten years’ experience working in a senior engineering capacity, with Instrument & Controls equipment in an industrial setting in engineering or operations.
• Oil and Gas experience is required, with preference in LNG applications, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable.
• Good working knowledge of motors, gas turbines (Frames & Aero-derivatives) and compressors is required 
• Additional Skills: 
• Working knowledge of CMMS Systems
• RCFA tools for conducting failure analysis

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. 

We are seeking an Instrument and Control System Senior Designer to join our project team in Houston, TX. 

This position will report to the Principal Engineer, Instrument and Controls.

The role will be part of the team responsible for ensuring that the Plant Instrumentation and Control Systems operate as per design, in a safe and reliable manner with minimal downtime.  

Responsibilities: 

• I&C design/installation technical authority
• Ensure contractor adheres to project and international standards
• Provide design solution to upgrades and modifications on existing facilities
• Assist Commissioning and operation teams to troubleshoot and isolate control system issues
• Participate on Factory Acceptance Tests
• Review staffing and progress of assigned systems deliverables
• Review and approve bulk material substitutions (cables, cable glands, tubing, tubing fittings, etc.)
• Review and approve temporary modifications to I&C equipment
• Provides input to weekly site engineering report

Qualifications: 

• Bachelor’s degree in Electrical, Chemical, Electronics, or Computer Engineering, preferably with specialization in Process Control, Control systems, and Instrumentation.
• Minimum 10 years’ experience working with instrumentation and control systems.
• Experience with:
• Plant Instrumented Control and Safety Systems Honeywell and Emerson CHARMS), Honeywell and Emerson CHARMS), Fire and Gas Systems, and 
• Operational Technology Networks, fiber optic, wiring design.
• IT Network installation for PAGA, Security, CCTV, LAN and Access Control
• Field Instrumentation installation for process measurement including cryogenic applications (e.g. Pressure, Temperature, Level, Flow, etc.)  Control Valves, Shutdown Valves (Air, Gas, and Motor Operated), Analyzers (H2S, Moisture, etc.) Gas Chromatographs, Flow Metering Systems (Ultrasonic, Coriolis, Differential Pressure, etc.) and their transmission systems (e.g. 4-20mA, Hart, ProfiBus, etc.)
• Packaged equipment instrumentation and installation.
• Experience in LNG liquefaction facilities highly preferred

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

We are looking for a Senior Cybersecurity Engineer to architect and implement technical security controls for our grid-connected energy portfolio. As we scale our operations, we need a hands-on engineer to secure the entire data lifecycle - from the industrial control systems (OT) at the edge, through the cloud telemetry pipeline, to the corporate dashboards.

This is a builder role. You will be responsible for deploying and managing our core security infrastructure - specifically Wazuh and Authentik - to secure our AWS environments and operational field assets. You will work directly with control systems engineers and DevOps teams to build security into our backbone.

Responsibilities will include: 

Cloud & Infrastructure Security

• Cloud Architecture: Secure the AWS infrastructure that hosts our energy management platforms. Implement hardening baselines and manage security groups for cloud resources
• SIEM & Observability (Wazuh): Architect a centralized and on-prem SIEM deployment to ingest logs from CloudTrail, VPC Flow Logs, and Linux servers. Configure custom decoders to detect threats across both cloud and on-prem environments
• Infrastructure as Code (IaC): Review and secure Terraform/CloudFormation scripts. Manage security configurations (including Wazuh agents and Authentik outposts) via Ansible or similar automation tools
• IoT/Edge Security: Secure the telemetry pipeline from the edge device (site controller) to the cloud, ensuring encryption (TLS 1.2/1.3) and proper certificate management (PKI) for edge

Identity & Access Management (IAM)

• Unified IAM (Authentik): Architect Authentik as the central Identity Provider (IdP), enforcing MFA and SSO across cloud consoles, internal engineering tools, and Grafana dashboards
• Least Privilege: Engineer granular IAM roles for cloud resources and service accounts, ensuring that automated services have only the permissions necessary to function

Operational Technology (OT) Security

• Network Segmentation: Design and implement IEC 62443-aligned network architectures (Purdue Model), strictly controlling traffic between the IT, Cloud, and OT zones
• Vulnerability & Integrity Monitoring: Deploy Wazuh agents on industrial PCs and HMIs to perform File Integrity Monitoring (FIM) and vulnerability scanning without disrupting critical real-time processes
• Industrial Protocols: Analyze and secure communications (Modbus, DNP3) to ensure integrity between field assets and control centers

Requirements:

• 5–8 years of technical cybersecurity experience, with a specific blend of Cloud/Linux Engineering and OT/Industrial exposure
• Proven experience working with industrial control systems (ICS), SCADA, or utility/energy infrastructure
• Deep expertise in securing Linux-based cloud environments and managing infrastructure via code
• Comfortable debugging a failed Wazuh agent on a Linux server or tracing a dropped packet in a cloud VPC
• Tailoring flexible open-source tools to fit specific architectural needs rather than relying solely on "black box" commercial vendors

Technical stack proficiency: 

• Wazuh: Deep experience deploying managers/agents, writing custom rules/decoders, and tuning FIM/SCA modules for low-noise environments
• Authentik: Experience configuring Providers (OIDC, SAML), Outposts, and proxying legacy applications
• Cloud Platforms: Proficiency with AWS (GuardDuty, IoT Core, IAM) or Azure (Defender for IoT, Entra ID)

Preferred experience:

• Experience with Docker/Kubernetes security in an edge computing context
• Knowledge of industrial protocols (Modbus TCP, DNP3, IEC 61850)
• Certifications: GICSP, GRID, AWS Certified Security – Specialty

Location: Houston (hybrid) OR Atlanta (remote) with up to 40% travel to project sites as needed.

Role Overview

The EMS Deployment Engineer is responsible for deploying, configuring, and supporting Ignition-based Energy Management Systems (EMS) for utility-scale Battery Energy Storage System (BESS) projects. This role plays a critical part in commissioning, ensuring reliable system visibility, control, data flow, and integration between EMS, PLCs, PCS, BMS, and site networks.

Key Responsibilities

• Deploy, configure, and support Ignition-based EMS/SCADA platforms for BESS projects
• Support commissioning activities including EMS bring-up, system integration testing, SAT, and early operational support
• Configure Ignition gateways, tags, UDTs, alarms, historian, and visualization components
• Integrate EMS with Siemens PLCs, PCS, BMS, meters, protection relays, and site networks
• Support data acquisition, control workflows, and site-level dashboards for commissioning and operations
• Troubleshoot EMS, data, and communications issues under commissioning timelines
• Collaborate closely with Controls Engineers, Network Engineers, Deployment Engineers, and Field Commissioning teams
• Support FATs, site commissioning, and handover to Service and Operations teams
• Assist in developing standardized EMS templates, screen sets, tag models, and deployment procedures
• Review and validate EMS documentation, configurations, and as-built deliverables
• Travel to project sites during deployment and commissioning phases as required

Required Qualifications

• Hands-on experience deploying and supporting Ignition (Inductive Automation) in OT or industrial environments
• Experience configuring tags, UDTs, alarms, historians, and visualization in Ignition
• Experience integrating EMS/SCADA platforms with PLCs and field devices
• Strong understanding of OT systems and industrial communications
• Ability to troubleshoot across EMS, controls, and networking boundaries
• Comfortable working in fast-paced commissioning environments with evolving requirements
• Willingness to travel to project sites as required
• Direct, hands-on Ignition deployment experience is required.
• Ability to travel to project sites 30-40% as needed.

Preferred Experience

• Experience with utility-scale BESS, renewables, power generation, or substation environments
• Familiarity with Siemens PLCs and Modbus TCP / IEC 61850 (high-level understanding)
• Experience supporting commissioning teams on live sites
• Knowledge of OT cybersecurity fundamentals
• Experience working with EPCs, OEMs, and customer stakeholders

What Success Looks Like (First 6–12 Months)

• Ignition-based EMS systems are deployed reliably across new BESS projects
• Commissioning timelines are supported through stable EMS visibility and control
• EMS-related issues are identified and resolved quickly during site bring-up
• EMS configurations become more standardized and repeatable across projects
• Field, commissioning, and service teams trust this role as the EMS authority

As a Stationary Engineer within Corporate Advisory & Solutions, you will be responsible for the continuous operation, monitoring, and maintenance of building systems, including HVAC, boilers, chillers, electrical, and plumbing systems. This role focuses on maintaining optimal system performance through routine inspections, preventive maintenance, and timely response to operational issues to ensure safe, efficient, and uninterrupted building operations.

Essential Duties and Responsibilities:

• Operate, monitor, and maintain central plant systems, including boilers, chillers, cooling towers, air handling units, and associated equipment
• Perform scheduled preventive maintenance, inspections, and repairs on building systems and equipment
• Monitor building automation systems (BAS) and equipment readings; adjust controls to maintain optimal performance and efficiency
• Respond to and troubleshoot system alarms, equipment failures, and tenant service requests, escalating complex issues as needed
• Maintain accurate logs of equipment operation, inspections, and maintenance activities
• Ensure all systems are operating within established parameters and in compliance with safety and regulatory standards
• Support start-up, shutdown, and seasonal changeover of mechanical systems
• Assist with contractor coordination and oversight for specialized repairs and maintenance
• Conduct routine building and equipment inspections to identify deficiencies and recommend corrective actions
• Replace filters, belts, and other system components as required
• Follow company safety protocols and wear appropriate PPE; ensure compliance with OSHA, NEC, NFC, and NFPA regulations; report hazards and participate in safety programs
• Communicate effectively with tenants, vendors, property management, and internal teams to support efficient operations
• Provide guidance and support to junior technicians as needed
• Participate in ongoing training and professional development to enhance technical expertise
• Perform other duties as assigned

Qualifications:

• High school diploma or GED required
• Two to three years of related experience in building operations or central plant systems, or equivalent trade/certification experience
• Stationary engineering experience preferred
• Relevant licenses or certifications (e.g., Stationary Engineer license, CFC/EPA certification) preferred or willingness to obtain as required by local/state regulations
• Working knowledge of HVAC, electrical, plumbing, and mechanical systems, with an emphasis on central plant operations
• Experience with building automation systems (BAS) and equipment monitoring
• Basic proficiency with computer systems, including work order platforms and Microsoft Outlook
• Familiarity with fire/life safety systems and procedures
• Ability to read and interpret blueprints, technical manuals, and code requirements
• Strong troubleshooting and problem-solving skills
• Proven ability to communicate effectively with tenants, vendors, contractors, and internal teams
• Ability to work flexible hours, including after-hours, weekends, holidays, and emergency situations as needed
• Knowledge of tools, equipment, and safe work practices

Physical Requirements:

Ability to stand, walk, climb ladders, and lift up to 50 pounds; perform physically demanding tasks such as stooping, crouching, and kneeling.

This position is 100% in-office. The role requires working in office during standard business hours. Remote work or telecommuting is not an option for this position.

#IND123

We’re looking for a Controls Engineer with project-based engineering experience to support network-and-controls-related hardware product design, documentation, project-specific technical compliance and support the development activities related to these products. This is a product focused role—we need someone who can speak fluently about both network architecture and industrial control systems, ideally have experience in mission critical applications, and interface with IT, software, project, commissioning and O&M engineering teams.

What You’ll Do

• Support the business development team by providing technical proposals e.g. network diagrams that meet the customer’s needs.
• Collaborate across control systems, SCADA, and IT teamsto ensure complete and secure connectivity
• Integrate and support industrial protocols like Modbus, DNP3, and OPC-UA
• Compile product technical information packages for the project engineering team.
• Co-lead review and validation of network/controls product-related topics during the project execution phase.
• Maintain technical documentation including as-built drawings
• Support product development by capturing design improvement feedback from the different project phases: design, commissioning and O&M.
• Support product development by recommending design approaches and vendors of the main equipment.
• Participate in product design sprints with the development team.
• Participate in the product’s commissioning phase.

Required Qualifications

• Bachelor’s degree in Controls Engineering, Electronics Engineering, or similar technical field.
• 3+ yearsof hands-on controls engineering experience in project-based or industrial settings.
• Strong grasp of protocols (TCP/IP, BGP, OSPF, VLANs, VPNs)
• Familiarity with control systems and operational technology (OT)
• Ability to produce and read network and control architecture drawings
• Excellent communication skills across technical and non-technical teams.
• Willing to travel up to 20% for product FAT inspection and site commissioning witnessing.

Preferred Plus

• Experience with BESS, SCADA, EMS, Safety Systems or utility-scale infrastructure
• Background in energy, utility, or data center environments

Job Summary:

Responsible for land development, residential, industrial, retail, mixed-use, healthcare, educational and recreational design technical tasks including, but not limited to: conceptual site layout; utility design; roadway design; site grading design; soil erosion and sedimentation control design; floodplain studies; providing permitting and entitlement support; preparation of engineer’s opinions of probable cost; assistance with preparation of proposals; and construction support. 

Accountability and Duties:

• Prepares engineer’s opinion of probable cost
• Prepares design calculations
• Maintains a good relationship with clients
• Prepares permit applications for applicable municipal agencies
• Responsible for preparation of feasibility studies, master planning and engineering, design of water, sanitary and storm sewer, paving and detention facilities
• Assists in preparation of proposals for engineering services
• Reviews and prepares project specifications
• Assists in production of final construction drawings
• Mentors and assists with training Civil Engineers
• Delegates specific project components to Civil Engineers
• Works closely with other disciplines on multi-discipline projects
• Responsible for project schedules and time completion of projects
• Participates in business development activities
• Professionally represent the firm at client and municipal meetings/hearings
• Prepares and monitors project budgets, billing and assists with A/R
• Perform other duties incidental to the work described herein.

Required Certificates, Licenses, Registration:

• PE license required
• Valid driver’s license. 

Qualification Requirements:

• 6+ years of experience, AutoCAD Civil 3D experience

Education and/or Experience:

• Bachelor’s degree in Civil Engineering from an accredited four-year college or university.

Required Knowledge, Skills, and Abilities:

• Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
• Outstanding writing, communications and interpersonal skills.
• Proficient in AutoCAD Civil 3D and Microsoft Office. 
• Must be fluent in the English language 

Physical Demands:

• The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• While performing the duties of this job, the employee is frequently required to sit and talk or hear. The employee is occasionally required to stand, walk, use hands to finger, handle or feel objects, tools, or controls; reach with hands and arms; and stoop; kneel, crouch or crawl. The employee may frequently lift or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and the ability to adjust focus.
• While performing the duties of this job, the employee occasionally works in outside weather conditions, possibly for extended assignments. 

Disclaimer 

While AI tools may support your application process, this role is built on human talent. Your judgment, experience, and character matter most, so we encourage you to showcase what makes you uniquely you.

Atwell does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any Atwell employee. Resumes from approved vendors must be specifically requested by Atwell and approved by the Atwell Talent Acquisition Team.

#LI-LG1

Atwell is seeking a Substation Engineer to join our growing Power & Energy team. We are a full-service consulting firm supporting the design and execution of power generation and power delivery systems across a broad range of markets, including utility-scale wind, solar, BESS, substations, transmission, and distribution infrastructure.

This role offers the opportunity to support impactful utility and renewable energy projects, work across multi-disciplinary teams, and contribute to both and/or substation physical design and protection & controls engineering.

What You’ll Do

• Support the design and engineering of high-voltage substations for utility, renewable, and power delivery projects
• Contribute to both physical substation design and Protection & Controls (P&C) engineering packages
• Lead or support engineering tasks from project kickoff through IFC/design package completion
• Coordinate closely with civil, structural, SCADA, relay, and project management teams to deliver integrated solutions
• Prepare technical deliverables including one-lines, three-lines, schematics, wiring diagrams, panel layouts, grounding plans, conduit/raceway layouts, cable schedules, bills of material, specifications, reports, and client-facing documents
• Provide engineering support during procurement, construction, commissioning, and startup phases
• Occasionally travel for field walkdowns, client meetings, factory acceptance testing, or construction support

Focus Areas

Physical Design

• Develop and support substation physical layout and design packages for high-voltage projects
• Prepare or review:
• General arrangement drawings
• Plan and elevation drawings
• Grounding layouts
• Conduit and cable routing plans
• Control building layouts
• Equipment connection details
• Foundation and equipment interface coordination
• Coordinate major equipment layouts including transformers, breakers, switches, bus systems, CCVTs/PTs, CTs, panels, batteries, and other station equipment
• Work closely with civil and structural teams to align grading, foundations, trenching, and equipment placement
• Support development of material lists, specifications, and installation details

Protection & Controls (P&C)

• Develop and support P&C design packages including:
• One-line and three-line diagrams
• AC/DC schematics
• Wiring diagrams
• Relay panel layouts
• Interconnection diagrams
• Communication diagrams
• SCADA point lists
• Perform engineering calculations such as battery sizing, voltage drop, conduit fill, and cable sizing
• Support relay setting development, protection philosophies, and coordination with OEMs and system stakeholders
• Contribute to arc flash, coordination, and other protection-related studies as applicable

What We’re Looking For

• Bachelor’s Degree in Electrical Engineering from an ABET-accredited program
• 5+ years of experience in substation engineering, power delivery, utility, or renewable energy projects
• Experience supporting physical design, Protection & Controls, or both within substation projects
• Strong understanding of high-voltage substation systems and design practices
• Experience developing engineering deliverables such as one-lines, schematics, wiring diagrams, layouts, grounding plans, and design packages
• Familiarity with applicable industry codes and standards including NEC, NESC, IEEE, ANSI, and NFPA
• Proficiency with tools such as AutoCAD, Bluebeam, and Microsoft Office

Preferred Qualifications

• Professional Engineer (PE) license, or ability to obtain
• Experience supporting utility-scale renewable energy projects, transmission, or high-voltage infrastructure
• Familiarity with relay coordination, SCADA integration, grounding design, and substation design standards
• Experience with ETAP, SKM, ASPEN, CYMCAP, or similar power system software is a plus

Pay Band - $100,000 - $155,000 base + bonus + benefits. 

Disclaimer 

While AI tools may support your application process, this role is built on human talent. Your judgment, experience, and character matter most, so we encourage you to showcase what makes you uniquely you.

Atwell does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any Atwell employee. Resumes from approved vendors must be specifically requested by Atwell and approved by the Atwell Talent Acquisition Team.

#LI-TK1

About the Role:  

Veeam, following its acquisition of Securiti AI - the leader in AI-powered data security posture management (DSPM) - is seeking a Senior Sales Engineer to drive technical leadership in our sales team, focusing on the Securiti AI portfolio.

You will guide customers from needs assessment to solution design, delivering hands-on demos and proof-of-concepts to showcase value. Success in this role requires strong technical skills and the ability to build trust with clients.

You’re already a technical leader trusted at executive levels when the conversation shifts from “we need to secure our data” to “we need to enable safe, compliant AI at scale.” 

You’re already an expert on data/AI security and a proven enterprise sales engineer. Now it’s time to join the home of Data and AI Trust. 

You’ve already seen our new release of Agent Commander, but you haven’t seen what’s coming next. After the acquisition of Securiti AI, Veeam is even further into the forefront of data resilience, protection, trust, and the acceleration of safe AI at scale.

Are you ready for an exciting new challenge at enterprise scale?

What You’ll Do: 

• Act as the primary technical contact for Securiti AI solutions during the sales cycleServe as the primary technical data protection expert for Securiti AI and Veeam solutions throughout the pre-sales cycle.
  
• Lead discovery to translate risk, architecture, and business goals into a practical solution approach.
  
• Design and deliver tailored demos and hands-on proof-of-concepts that prove value in the customer’s environment.
  
• Drive technical conversations on AI Trust, Data Discovery, DSPM, Data Access & Governance, and Compliance (including GDPR, HIPAA, PCI-DSS).
  
• Provide solution guidance across AWS, Azure, and GCP, including cloud security best practices and identity/access concepts.
  
• Partner cross-functionally with sales, product, engineering, and customer success to ensure clean technical handoff and customer confidence post-sale.
  
• Hone your professional development through hands-on experimentation, team collaboration, robust onboarding, and more.
  
• Work ~80% remote, with client-facing travel usually 1-2 short trips per month. 

What You’ll Bring (required): 

• Extensive enterprise sales experience in data protection, cloud security, networks, and AI.
  
• Proven ability to quickly develop trust and credibility with both technical and business stakeholders.
  
• Strong technical leadership foundation in enterprise data protection, cloud security, networks, and AI.
  
• Hands-on experience with AWS, Azure, or GCP (multi-cloud exposure strongly valued).
  
• Deep working knowledge of data privacy/security and compliance programs, especially GDPR, HIPAA, and PCI-DSS, plus data governance and access controls.
  
• Ability to build and run compelling demos and POCs while earning trust as a customer-facing technical lead.
  
• Practical technical fluency with areas such as Linux, Kubernetes/containerized environments, and modern cloud/data architectures.
  
• Strong expertise with DSPM, DLP, data discovery approaches (e.g., patterns/keywords/dictionaries/regex/exact matching) and with common cloud/data systems (e.g., object storage and enterprise databases/warehouses).

         Preferred (strong differentiators): 

• Experience applying or discussing GenAI security in real enterprise contexts, including RAG (Retrieval-Augmented Generation) concepts and vector databases / indexing approaches.
  
• Exposure to CASB / SASE / DLP technologies and how customers operationalize them.
  
• Relevant certifications (CISSP, CISM, AWS/Azure/GCP).
  

#LI-JC3

Job Summary

The Solution Engineer/SE serve as strategic technical consultants and project leaders, supporting Automation Solutions sales, applied system development, and project initiatives across focused vertical markets. Operating with a high level of autonomy, SEs design, implement, and support advanced solutions that integrate Phoenix Contact’s complex technical products with third-party components to meet specific customer or industry segment needs. These specialists interpret and translate customer specifications into functional concepts, delivering tailored application solutions that address operational challenges and align with industry best practices. Industries served include oil and gas, water/wastewater treatment, building automation, data centers, transportation infrastructure, electric power, automotive, and network & security. Solution Engineers are strategically positioned to drive innovation, organizational agility, and long-term business value.

Responsibilities

• Develop an expert area of specialization (industry/technology) as directed by manager and attain related certifications
• Mentor and advise Associate Solution Engineers, Technical Service, Product Engineering, and Product Management on product performance in the field and suggest design changes to improve product performance and customer satisfaction
• Design training programs and training material to support complex control system projects
• Develop advanced system testing and troubleshooting processes utilizing spectrum analyzers, storage scopes, power monitors, volt meters, and other required test equipment
• Provide applied solution design and engineering support to the Control and Industry Solutions team
• Independently qualify and gather input for designs through functional specification review or by direct customer interaction
• Provide pre-sales technical support and develop a concept framework based on customer requirements and industry standards and practices
• Develop and implement test plans to validate proposed solutions
• Develop and serve as technical lead on ‘proof of concept’ or pilot applications
• Provide project management as required, and advise project team on technical issues throughout the project lifecycle
• Develop, implement, and provide on-site installation start-up support
• Perform application demonstrations together with Phoenix Contact sales engineer and/or PSE at potential customer sites
• Research and understand existing competitive and emerging products and technologies
• Document and internally communicate data supporting the development of new products to meet focus market/customer requirements
• Support the sales effort of Phoenix Contact’s complex technical products when positioned and sold as industry solutions at OEM, end-user, and system integrator focused accounts within primary and supported market segments
• Support Phoenix Contact field personnel and channel partners in technical aspects relating to the sale of systems and solutions
• Develop and conduct control solution presentations and technology seminars to targeted audiences
• Position Phoenix Contact as a technology leader through active involvement in industry related technical associations
• Develop and maintain an expert understanding of industrial networking and communication technologies. Specific expertise in Industrial Ethernet Protocols:  Profinet, Ethernet/IP, and Modbus TCP
• Develop and maintain an expert working knowledge on all Phoenix Contact industrial products with specialized emphasis on IEC 61131 programming, industrial ethernet (wired and wireless), and networked I/O
• Maintain knowledge proficiency through continued participation in industry trade events and conferences including active participation in presenting Phoenix Contact Case Studies, etc.
• Attendance and participation in accordance with corporate policies in local, national, and international meetings

Qualifications

• Minimum Associate’s Technical Degree + equivalent experience. Bachelor’s degree in engineering or technical focus preferred.
• Minimum of 4 years industrial automation experience
• Industry specific controls system design and programming experience
• Motivated self-starter with the ability to work autonomously and as part of a team
• Ability to set priorities and perform simultaneous tasks
• Ability to meet deadlines and adjust to changing priorities to meet business goals
• Excellent written and verbal communication skills
• Proficient computer skills (Word, Excel, PowerPoint)
• Effective interpersonal skills with comfort in delivering group presentations

Essential Job Functions

• 35% Travel Requirement (2% - 5% Overseas)
• Must be able to lift 60 pounds
• Must be able to sit and/or stand for extended periods of time (2-4 hours at a time)
• Must be able to work on a computer for extended periods of time (up to 4 hours at a time)
• Must be able to travel in vehicles (automobiles, trains, and planes) for up to 10 hours
• Must be able to communicate effectively in verbal and written English
• Must comply with company dress code guidelines
• Punctuality and attendance in accordance with company policies
• Timely reporting of expenses
• Regular and on-time attendance.
• This is a hybrid position requiring at least three days in the office, unless otherwise specified.

What’s in it for you?

Phoenix Contact offers a generous benefits package that includes medical, dental, and vision coverage, 401k matching, and a generous time off package. There are also a wide variety of additional benefits available including 16 weeks fully paid maternity leave & 10 weeks fully paid paternity leave, life insurance, short & long-term disability, assistance, and more!

#LI-RD1

Job Summary

The Solution Engineer/SE serve as strategic technical consultants and project leaders, supporting Automation Solutions sales, applied system development, and project initiatives across focused vertical markets. Operating with a high level of autonomy, SEs design, implement, and support advanced solutions that integrate Phoenix Contact’s complex technical products with third-party components to meet specific customer or industry segment needs. These specialists interpret and translate customer specifications into functional concepts, delivering tailored application solutions that address operational challenges and align with industry best practices. Industries served include oil and gas, water/wastewater treatment, building automation, data centers, transportation infrastructure, electric power, automotive, and network & security. Solution Engineers are strategically positioned to drive innovation, organizational agility, and long-term business value.

Responsibilities

• Develop an expert area of specialization (industry/technology) as directed by manager and attain related certifications
• Mentor and advise Associate Solution Engineers, Technical Service, Product Engineering, and Product Management on product performance in the field and suggest design changes to improve product performance and customer satisfaction
• Design training programs and training material to support complex control system projects
• Develop advanced system testing and troubleshooting processes utilizing spectrum analyzers, storage scopes, power monitors, volt meters, and other required test equipment
• Provide applied solution design and engineering support to the Control and Industry Solutions team
• Independently qualify and gather input for designs through functional specification review or by direct customer interaction
• Provide pre-sales technical support and develop a concept framework based on customer requirements and industry standards and practices
• Develop and implement test plans to validate proposed solutions
• Develop and serve as technical lead on ‘proof of concept’ or pilot applications
• Provide project management as required, and advise project team on technical issues throughout the project lifecycle
• Develop, implement, and provide on-site installation start-up support
• Perform application demonstrations together with Phoenix Contact sales engineer and/or PSE at potential customer sites
• Research and understand existing competitive and emerging products and technologies
• Document and internally communicate data supporting the development of new products to meet focus market/customer requirements
• Support the sales effort of Phoenix Contact’s complex technical products when positioned and sold as industry solutions at OEM, end-user, and system integrator focused accounts within primary and supported market segments
• Support Phoenix Contact field personnel and channel partners in technical aspects relating to the sale of systems and solutions
• Develop and conduct control solution presentations and technology seminars to targeted audiences
• Position Phoenix Contact as a technology leader through active involvement in industry related technical associations
• Develop and maintain an expert understanding of industrial networking and communication technologies. Specific expertise in Industrial Ethernet Protocols:  Profinet, Ethernet/IP, and Modbus TCP
• Develop and maintain an expert working knowledge on all Phoenix Contact industrial products with specialized emphasis on IEC 61131 programming, industrial ethernet (wired and wireless), and networked I/O
• Maintain knowledge proficiency through continued participation in industry trade events and conferences including active participation in presenting Phoenix Contact Case Studies, etc.
• Attendance and participation in accordance with corporate policies in local, national, and international meetings

Qualifications

• Minimum Associate’s Technical Degree + equivalent experience. Bachelor’s degree in engineering or technical focus preferred.
• Minimum of 4 years industrial automation experience
• Industry specific controls system design and programming experience
• Motivated self-starter with the ability to work autonomously and as part of a team
• Ability to set priorities and perform simultaneous tasks
• Ability to meet deadlines and adjust to changing priorities to meet business goals
• Excellent written and verbal communication skills
• Proficient computer skills (Word, Excel, PowerPoint)
• Effective interpersonal skills with comfort in delivering group presentations

Essential Job Functions

• 35% Travel Requirement (2% - 5% Overseas)
• Must be able to lift 60 pounds
• Must be able to sit and/or stand for extended periods of time (2-4 hours at a time)
• Must be able to work on a computer for extended periods of time (up to 4 hours at a time)
• Must be able to travel in vehicles (automobiles, trains, and planes) for up to 10 hours
• Must be able to communicate effectively in verbal and written English
• Must comply with company dress code guidelines
• Punctuality and attendance in accordance with company policies
• Timely reporting of expenses
• Regular and on-time attendance.
• This is a hybrid position requiring at least three days in the office, unless otherwise specified.

What’s in it for you?

Phoenix Contact offers a generous benefits package that includes medical, dental, and vision coverage, 401k matching, and a generous time off package. There are also a wide variety of additional benefits available including 16 weeks fully paid maternity leave & 10 weeks fully paid paternity leave, life insurance, short & long-term disability, assistance, and more!

#LI-RD1

Job Summary

Solution Engineer I (SE) serve as strategic technical consultants and project leaders, supporting Automation Solutions sales, applied system development, and project initiatives across focused vertical markets. Operating with a high level of autonomy, SEs design, implement, and support advanced solutions that integrate Phoenix Contact’s complex technical products with third-party components to meet specific customer or industry segment needs. These specialists interpret and translate customer specifications into functional concepts, delivering tailored application solutions that address operational challenges and align with industry best practices. Industries served include oil and gas, water/wastewater treatment, building automation, data centers, transportation infrastructure, electric power, automotive, and network & security. Solution Engineers are strategically positioned to drive innovation, organizational agility, and long-term business value.

Responsibilities

• Develop an expert area of specialization (industry/technology) as directed by manager and attain related certifications
• Mentor and advise Associate Solution Engineers, Technical Service, Product Engineering, and Product Management on product performance in the field and suggest design changes to improve product performance and customer satisfaction
• Design training programs and training material to support complex control system projects
• Develop advanced system testing and troubleshooting processes utilizing spectrum analyzers, storage scopes, power monitors, volt meters, and other required test equipment
• Provide applied solution design and engineering support to the Control and Industry Solutions team
• Independently qualify and gather input for designs through functional specification review or by direct customer interaction
• Provide pre-sales technical support and develop a concept framework based on customer requirements and industry standards and practices
• Develop and implement test plans to validate proposed solutions
• Develop and serve as technical lead on ‘proof of concept’ or pilot applications
• Provide project management as required, and advise project team on technical issues throughout the project lifecycle
• Develop, implement, and provide on-site installation start-up support
• Perform application demonstrations together with Phoenix Contact sales engineer and/or PSE at potential customer sites
• Research and understand existing competitive and emerging products and technologies
• Document and internally communicate data supporting the development of new products to meet focus market/customer requirements
• Support the sales effort of Phoenix Contact’s complex technical products when positioned and sold as industry solutions at OEM, end-user, and system integrator focused accounts within primary and supported market segments
• Support Phoenix Contact field personnel and channel partners in technical aspects relating to the sale of systems and solutions
• Develop and conduct control solution presentations and technology seminars to targeted audiences
• Position Phoenix Contact as a technology leader through active involvement in industry related technical associations
• Develop and maintain an expert understanding of industrial networking and communication technologies. Specific expertise in Industrial Ethernet Protocols:  Profinet, Ethernet/IP, and Modbus TCP
• Develop and maintain an expert working knowledge on all Phoenix Contact industrial products with specialized emphasis on IEC 61131 programming, industrial ethernet (wired and wireless), and networked I/O
• Maintain knowledge proficiency through continued participation in industry trade events and conferences including active participation in presenting Phoenix Contact Case Studies, etc.
• Attendance and participation in accordance with corporate policies in local, national, and international meetings

Qualifications

• Minimum Associate’s Technical Degree + equivalent experience. Bachelor’s degree in engineering or technical focus preferred.
• Minimum of 4 years industrial automation experience
• Industry specific controls system design and programming experience
• Motivated self-starter with the ability to work autonomously and as part of a team
• Ability to set priorities and perform simultaneous tasks
• Ability to meet deadlines and adjust to changing priorities to meet business goals
• Excellent written and verbal communication skills
• Proficient computer skills (Word, Excel, PowerPoint)
• Effective interpersonal skills with comfort in delivering group presentations

Essential Job Functions

• 35% Travel Requirement (2% - 5% Overseas)
• Must be able to lift 60 pounds
• Must be able to sit and/or stand for extended periods of time (2-4 hours at a time)
• Must be able to work on a computer for extended periods of time (up to 4 hours at a time)
• Must be able to travel in vehicles (automobiles, trains, and planes) for up to 10 hours
• Must be able to communicate effectively in verbal and written English
• Must comply with company dress code guidelines
• Punctuality and attendance in accordance with company policies
• Timely reporting of expenses
• Regular and on-time attendance.
• This is a hybrid position requiring at least three days in the office, unless otherwise specified.

What’s in it for you?

Phoenix Contact offers a generous benefits package that includes medical, dental, and vision coverage, 401k matching, and a generous time off package. There are also a wide variety of additional benefits available including 16 weeks fully paid maternity leave & 10 weeks fully paid paternity leave, life insurance, short & long-term disability, assistance, and more!

#LI-RD1