About the Role

The Ground System Deployments team is looking for an innovative, collaborative and self-driven Civil Project Engineer to join the team to ensure the successful deployment of Zipline’s Ground Systems in all possible applications and configurations. 

This role is well suited to seasoned civil engineers looking to apply their experience designing novel and innovative sites, foundations and structures to advance and accelerate the new and growing industry of  autonomous drone delivery ground systems. 

With broad scope to influence the design of current and next generation systems this role will jopin a stellar team responsible for the site level designs, layouts, civil designs, structural and foundation designs and implementation. Interacting with various mechanical, structural and electrical engineering stakeholders across the organization this role will  ensure the overall system and its site design work hand in hand to ensure the successful deployment of Ziplines Ground Systems within cost and timeline goals. 

This role has a mandate to drive positive change through the organization - as problems or scenarios occur this individual will be tasked with both 0 to 1 problem/project responsibility and also working with the broad engineering and deployments organization to implement foundation changes to product and process as needed. 

This position can be based out of our San Francisco, Dallas or Houston Offices. Onsite is preferred, but this role can be remote flexible with up to 50% travel for the right candidate.

WHAT YOU’LL DO

• Act as the Civil Engineer of Record for Zipline projects in Texas and other jurisdictions
• Create, refine and update civil layouts for the sites. Act as the Zipline representative for any technical clarifications from cities or jurisdictions regarding our designs. 
• Contribute to the civil and site design standards of Zipline sites. 
• Contribute to the pavement, drainage, and sitescape designs and approaches of Zipline sites and structures. 
• Advise on permitting, codes and and other certification efforts relevant to the projects and structures.  
• Engage and interact with cities and relevant inspectors or relevant external parties to ensure timely project approvals and deployment. 
• Ensure relevant and applicable civil strategies are investigated and implemented where appropriate - grading designs, curb designs, pavement designs
• Understand our internal and external customer’s business and needs and work with our internal engineering and business teams to refine and roadmap necessary changes to ensure the successful deployment of the Ground Systems infrastructure. 
• Source and develop relationships with outside organizations (local jurisdiction, utilities, contractors, OEM and material suppliers etc).
• Evaluate all options and a lean budget, select best vendors to ensure reliable and quality services and products.
• Understand and mitigate the preconstruction, construction, operational and sustaining  risks associated with each project. 
• Interact directly with internal and external partners and stakeholders as needed. 
• Domestic travel to project sites expected on an ad-hoc basis. 

WHAT YOU’LL BRING

• Civil Professional Engineering qualification with stamping capacity in Texas (or the ability to quickly obtain stamping capacity in Texas). Ability to stamp in Arizona and other sunbelt states a strong preference, or the ability and capacity to quickly gain this qualification. 
• Bachelor's degree or higher  with minimum 6 years of experience.
• The individual should have an Engineering background (Civil, others acceptable with relevant experience and stamping capacity) and have worked in the construction, electrical design/EPC, or renewable energy industry, or equivalent industries for 4+ years. The individual should have experience (4yrs+) in working with:
  • Civil codes and building standards, and applicable design and management software.
  • Technical Product Management, Technical Program Management or applicable areas.
  • Systems engineering and  system architecture.
  • External design teams (Architectural, Structural, Civil,Electrical MEPs) on commercial or industrial development  / construction projects.
  • Experience with automated logistics, UAV aviation, EVSE Charging, Renewable Energy and Battery Energy Storage Systems or equivalent industries a plus. 

• Strong candidates should have excellent communications skills to:
  • Drive internal alignment of requirements for projects based on business needs.
  • Provide leadership team with updates on scope, schedule and budgets. 
  • Drive external parties for the implementation of real estate projects. 
• Must be eligible to work in the US.

What Else You Need To Know

Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws or our own sensibilities.

We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply!

About the Role:

As the Sales/ Project Engineer for Ziplines Ground Systems and Site Infrastructure, you’ll spearhead the deployment success of Ziplines Offsite Charging sites, the game changing autonomous loading Zipping Point, and other site infrastructure. You’ll be handling all deployment topics, finding innovative solutions that work for partner sites, executing solutions to problems and roadblocks, and driving feedback and product changes to simplify and accelerate the rollout of Ziplines delivery infrastructure. This is a role well suited to technical engineers with great customer engagement skills - you’ll be crafting and designing solutions for new customers by listening to their feedback and needs, providing Zipline's fundamental perspectives and learnings and bringing all stakeholders along for the journey. As part of this you’ll engage in pre-contract discussions as the key technical stakeholder, the lead and manage those projects once signed from initial site evaluation through to construction and initial operation working across internal and external building and infrastructure teams, permitting and AHJ’s, installation teams and contractors, technical operations teams, and internal engineering and product teams.  You’ll work closely with the broader Engineering teams, Deployment and Construction team, Real Estate and Government Affairs,  Community Engagement and Legal teams teams to build strong relationships with key stakeholders and secure the necessary approvals to expand our network.

WHAT YOU’LL DO

• Work with customer teams and internal customer success teams to seamlessly integrate Zipline systems into both existing and newly designed infrastructure, including creating site layouts and related technical documents. Engage with partners’ internal teams to ensure alignment on expectations and timelines.
• Understand our internal and external customer’s business and needs and work with our internal engineering and business teams to refine and roadmap necessary product changes to ensure the successful deployment of the Ground Systems infrastructure. Maintain the high level customer specs and cut-sheets for the Zipline Systems. 
• Develop and lead pre-construction strategies to streamline entitlements and permits for Ziplines Ground System and Site Infrastructure projects. 
• Build and maintain strong relationships with Customer teams and technical staff, City Managers, staff, and City Council members and inspectors to facilitate smooth approvals and permit completion from Planning and Zoning commissions and AHJ’s. Collaborate closely with jurisdictions, land use counsel, Real estate team, and our Legal team to create pathways for deployments in evolving customer and regulatory landscapes.Source and foster relationships with external stakeholders, including local jurisdictions, utilities, and contractors.
• Understand and mitigate the preconstruction, construction, operational and sustaining  risks associated with each project. 
• Manage many parallel small construction projects, site infrastructure installments, construction contractors, and additional real estate development projects.
• Source and manage general contractors and subcontractors across various trades (construction, assembly, electrical) during bid, pre-construction, construction and site commissioning project phases. Evaluate all options and a lean budget, select best vendors to ensure reliable and quality services and products. Source and develop relationships with outside organizations (local jurisdiction, utilities, contractors, OEM and material suppliers etc).
• Develop and implement solutions to problems/projects/applications and associated systems from 0-1-100  across parallel projects and initiatives. 

WHAT YOU’LL BRING

• Bachelor’s degree in Engineering, Real Estate Development, Finance, Business Administration, Urban Planning, Architecture, Construction Management, or a related field 
• 4+  years of experience in a relevant field - technical sales of hardware products at scale, technical product management, real estate development or construction. Experience with technical sales and solution design of contractor installed equipment, and experience in the light commercial construction industry  is strongly preferred. 
• Proven ability to manage entitlements and permits for infrastructure projects in collaboration with internal and customers’ Real Estate and Construction teams. Familiarity with working alongside Authorities Having Jurisdiction (AHJs) to navigate permitting and inspection processes.
• Strong communication skills with the ability to align internal stakeholders on project requirements and provide leadership with regular updates on challenges, risks, and opportunities. Fluency in communicating ideas clearly, whether through quick sketches, sharp technical writing, or strategic presentations tailored to your audience.
• Experience working with External design teams (Architectural, Structural, Civil,Electrical MEPs) on commercial or industrial development  / construction projects. 
• Experience with CAD tools to develop site layouts, indicative construction designs and other technical drawings. 
• Based in the METRO region, with the flexibility to travel up to 20% domestically and internationally to support expansion projects.
• Must be eligible to work in the U.S.

What Else You Need To Know

Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws or our own sensibilities.

We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply! If you’d like to learn more about Zipline and our teams, feel free to check out our Instagram, one of our Reddit AMA’s, or our website!

Our Atomic Layer Deposition (ALD) Chamber Engineering team is seeking innovative and driven and experienced Mechanical Engineers to join their teams. Our ALD and team is at the forefront of developing cutting-edge technologies. As a Mechanical Engineer at ASM, you will contribute to designing, developing, and optimizing high-precision equipment. Collaborating with cross-disciplinary teams, you will play a critical role in solving complex engineering challenges, ensuring product reliability, and driving technological advancements. 

Responsibilities:

• Apply sound engineering principles, product specifications and research data to create designs for systems and products for semiconductor industry.
• Perform engineering calculations including structural, thermal and fluid dynamics problems
• Create and revise Creo Parametric CAD models and detail drawings, ranging in complexity from simple piece parts to large assemblies
• Determine feasibility of product proposals, resolve problems based on technical inputs and develop new designs maintaining product design safety criteria. Apply statistics to optimize and deliver “first time right” designs.
• Prepare product/system designs and related engineering documentation for the manufacturing and testing of prototype and production released products. The documentation shall be complete and easy to follow.
• Project management duties include report generation, schedule creation and maintenance, design reviews and interdepartmental coordination.
• Provide assistance in establishing product configuration and structures on new products and features in both development and manufacturing environments.
• Present and participate in design reviews for unique customer driven specials, product enhancements and other new designs.
• Create, manage and execute engineering project plans, including task scheduling with Gantt charts and resource and cost estimates,
• Travel to customer sites/supplier sites to participate in technical discussions.
• Assist marketing and vendors in preparation of cost estimates dealing with nonstandard options, new system features and product enhancements. 
• Support projects in conjunction with technical staff, managers and manufacturing groups. Support development, installation and testing of hardware to verify performance. Create test plans, verify and approve test procedures. 
• Interface with other organizations on new product updates and ensure a smooth transition of the product into the manufacturing cycle.
• Evaluate change requests and complete all aspects of engineering change orders.

Qualifications:

• Masters in Mechanical Engineering or related degree, PhD strongly preferred. 
• Experience in engineering, design, and development of complex mechanical systems including: reactors, vacuum chambers, gas delivery systems, pneumatics, water cooling circuits, and vacuum systems required.

Skills:

• Semiconductor capital equipment or heavy capital equipment preferred.
• Deposition product knowledge a plus (CVD, ALD, EPI, PVD)
• Knowledgeable in the requirements for CE, NFPA, Semi S2-95 and other relevant standards as applicable to semiconductor manufacturing equipment.
• Understanding of materials: metals, plastics, surface coatings and surface finishes.
• Computer background in Microsoft applications, CREO and AutoCAD.
• Proficiency in ASME Y14.5 and/or ISO 1101:2017 preferred geometric dimension and tolerance
• Has knowledge of best practices and how own area integrates with others; recommends product and process improvements.
• Able to work with a diverse team to achieve requirements and specifications on complex projects.
• Capability to provide and maintain resource coordination and reporting, interfacing with other organizations and outside vendors on resource requirements.
• A critical thinker with proven ability to create effective solutions to complex engineering problems.
• Excellent verbal and written communication; ability to present design concepts to peers and management in a professional and effective manner.
• Ability to work in a team environment with aggressive deadlines and multiple priorities while maintaining a team player attitude.
• Perform self-inspection of all work and is responsible for ensuring that all work performed adheres to documentation requirements, company policies and procedures.

About the Role:

Under the general direction of the Professional Services Operations Lead, the Engineer will provide clients with remote and on-site support services across North America (and international locations, as applicable) in a wide range of client environments.  Physical Infrastructure design/Installation, wireless design, and hardware configuration are standard tasks the Engineer will perform.  Environments can include, but are not limited to, traditional data center facilities, warehouses, office buildings, MDF/IDF closets, headends, and remote outdoor facilities.

*** This is a 100% Onsite requirement with heavy travel***

What You’ll Do:

• Accurately document network infrastructure and design.
• Perform systems engineering, design, analysis, and experimentation of wireless networks.
• Plan, design, engineer, configure, maintain, defend, troubleshoot, and repair classified and unclassified wireless LANs, including wireless access points and their interconnection to the wired infrastructure.
• Provide recommendations for wireless network optimization, additions, and upgrades to meet requirements.
• Perform RF coverage studies, throughput testing,g and wireless site surveys.
• Conduct a root cause analysis of communication issues.
• Lead/assist with proof-of-concept trials with new technologies.
• Develop and maintain standards, reports, and various other types of documentation.
• Determine Wireless Access Point (WAP) placement to optimize coverage across various client environments.
• Conduct client-facing meetings (in person/virtual) in a professional manner.
• Maintain a high level of customer satisfaction.
• Identify building structural components to safely and securely accommodate wall-mounted infrastructure.
• Installation and decommission of all types of enterprise-level equipment and infrastructure in various types of environments.
• Configure various devices (laptops, desktops, servers, switches) with static IP addresses, subnets, gateways, and DNS servers.
• Research /resolve unforeseen problems with little to no consultation.
• Provide guidance and shadowing opportunities for lower-level technicians to ensure adherence to best practices.
• Perform firmware and/or BIOS updates on server, storage, and networking hardware platforms.
• Support lower-level peers in performing crisis management in the event of critical situations or major service outages.
• Provide remote console access to various devices via WebEx, Teams, or Zoom screen sharing.
• Perform basic or pre-defined tasks as directed by the team lead.
• Actively participate during the service transition phase to perform knowledge transfer and documentation.
• Review, report, and maintain accurate records, document all issues/concerns, and submit to the client.
• Assist in performing root cause analysis.
• Determine when/if escalation to leadership is necessary.
• May perform other duties as assigned by supervisor.
• Follow the company's best practices and Standard Operating Procedures.
• Travel is required for physical network installation and configuration.

Qualifications & Interests:

• A minimum of 5 years of experience in enterprise-level network design and support, including: IEEE 802.1, WAN/LAN, optimization, load balancing, routing, switching, QOS, TCP/IP, P2P, and P2MP wireless equipment, with hands-on experience administering Cisco wireless access points and controllers.
• A valid driver's license is required. 
• Prior MSP experience desired.
• Thorough understanding of Ekahau Pro Suite and Sidekick functionality.
• CompTIA A+ certification preferred.
• CompTIA Network+ and Cisco CCNA certifications (or equivalent experience preferred).
• Ability to conduct clear and concise communication in English (written and verbal).
• Fundamental understanding of all Office365 products and their operation.
• Strong attention to detail and quality.
• Thorough understanding of subnetting (Ex, 255.255.255.0 = /24)
• Thorough understanding of console connectivity and OOB management.
• Ability to identify power circuits and circuit breakers.
• Ability to properly identify various device port assignments.
• Ability to identify various power receptacle types (NEMA 5-15, C13/14/15, C19/20, L5-20, L6-30, etc.).
• Ability to properly identify various device port types (RJ45-Console, DB9, SFP, RJ45 Ethernet).
• Ability to properly identify various fiber optic cables and optics (LC, SC, FC, Single Mode, Multimode, SR vs LR Optics).
• Ability to properly terminate and test CAT5 and CAT6 cables (Keystones, punch down panels, and ends).
• Ability to properly run power/data cables, label and dress to Trace3 standards.
• Thorough comprehension of fiber and copper patch panel function and A-Z port identification.

• Ability to travel domestically up to 85% - 90% of the time.

PHYSICAL DEMANDS:

 This role blends active movement with desk-based responsibilities. Candidates should be comfortable with:

• Standing and walking for long stretches across different areas of the facility.
• Lifting items—sometimes heavy, up to 65 to 200 pounds (assisted)—including navigating stairs and placing objects overhead.
• Occasionally, working from ladders when tasks require elevation.
• Performing physical motions such as bending, crouching, and reaching on a regular basis.
• Sitting for extended periods while handling administrative or computer-related tasks.
• Reading printed documents and screens with clarity, including close-up work and adjusting focus as needed.
• Communicating effectively in person and by phone, with clear hearing and speech.

WORK ENVIRONMENT:

• The job takes place in environments where animals are present, which may involve exposure to pet dander, medical tools, and related substances.
• Travel by car and air (up to 75%) is required.
• Employees will often be surrounded by coworkers and clients, with frequent conversations happening nearby.
• Noise levels and indoor temperatures may fluctuate depending on the setting.

As a Senior Engineer II, Mechanical Engineering at ASM, you will play a pivotal role in design and development of high‑precision ALD chamber and semiconductor equipment systems. In this role, you will apply solid mechanical engineering fundamentals to solve complex design challenges, support new product development, and ensure reliable transition from design to manufacturing. Working closely with cross‑functional teams, you will help drive product quality, performance, and innovation. 

What you will be working on 

• Design and develop mechanical systems and components for semiconductor equipment, applying sound engineering principles, product specifications, and research data. 
• Perform engineering calculations related to structural, thermal, and fluid dynamics to support robust and reliable designs. 
• Create and maintain Creo Parametric 3D CAD models and detailed drawings, ranging from individual parts to complex assemblies. 
• Evaluate the feasibility of product proposals, resolve technical issues, and develop new designs in compliance with product safety and design standards. 
• Manage Continuous Improvement Projects (CIPs) and ensure clear communication across teams and with external partners. 
• Prepare complete and clear engineering documentation to support prototype builds, manufacturing, and testing of released products. 
• Support engineering project activities, including report preparation, schedule planning, design reviews, and coordination with cross‑functional teams. 
• Establish product configurations and structures for new products and features in both development and manufacturing environments. 
• Participate in and present at design reviews for new designs, product enhancements, and customer‑specific solutions. 
• Support hardware development, installation, and testing to verify performance; create, review, and approve test plans and test procedures. 
• Interface with manufacturing, suppliers, and other engineering teams to ensure smooth product transfer into the manufacturing cycle. 
• Review and process engineering change requests (ECR/ECO) and support continuous product and process improvements. 
• Travel to customer or supplier sites as needed to support technical discussions and project execution. 
• Maintain a strong commitment to safety in all activities. 

What we are looking for 

• Master’s degree in mechanical engineering or related disciplines. 
• Several years of hands‑on experience in mechanical design and development of complex systems within semiconductor or capital equipment industries. 
• Practical experience with mechanical systems such as vacuum chambers, reactors, susceptor heaters, gas delivery systems, pneumatics, cooling circuits. 
• Ability to perform simulation and engineering analysis (e.g., structural, thermal, fluid dynamics) to support robust and reliable designs. 
• Proficiency in Creo (or equivalent CAD tools) and ability to create detailed engineering drawings 
• Solid understanding of materials, manufacturing processes, and mechanical design fundamentals. 
• Strong problem‑solving skills and the ability to work effectively in a cross‑functional, fast‑paced environment. 

What sets you apart 

• PhD in Mechanical Engineering or related degree.  
• Experience with semiconductor deposition equipment (ALD, CVD). 
• Strong capability to run and interpret Multiphysics simulations (structural, thermal, CFD) and apply the results to improve design specifications. 
• Experience with Susceptor heaters, Vacuum and electrostatic chucks. 
• Proficiency in GD&T standards (ASME Y14.5 and/or ISO 1101). 
• Experience supporting products through the full lifecycle, from concept and design to manufacturing release. 
• Ability to independently manage technical tasks while contributing effectively as a team player. 

Responsibilities:

• Design mechanical systems and products supporting ASM process chambers using sound engineering principles
• Drive data-based design decisions in a cross-functional team environment
• Lead hardware development from concept through testing and HVM readiness
• Create and manage 3D CAD models (Creo) and 2D drawings with GD&T
• Perform engineering analysis including structural, thermal, and fluid dynamics
• Maintain product configuration using modern PLM tools
• Participate in design reviews and drive DFx activities
• Collaborate with suppliers to resolve fabrication challenges
• Prepare documentation for manufacturing and testing
• Support cost estimation for new features and enhancements

Requirements:

• Master’s degree in mechanical engineering
• 2+ years of experience in mechanical design using 3D CAD (Creo preferred)
• Experience with FEA and CFD tools (e.g., Ansys, Comsol)
• Familiarity with part fabrication methods (CNC, sheet metal, welding, coatings)
• Knowledge of GD&T and engineering drawing standards
• Comfortable working in lab and cleanroom environments, including manual tasks

Preferred Qualifications

• Experience in semiconductor or capital equipment industry
• Knowledge of vacuum systems, wafer handling, gas/fluid delivery, robotics
• Experience with modern DFx practices
• Familiarity with SEMI standards (e.g., S2)
• Experience with PLM tools and methodologies
• Ability to mentor junior engineers and manage large design projects
• Willingness to travel (<10%) domestically and internationally

Job's mission

Our Epitaxy (EPI) teams are seeking innovative and motivated recent graduates to join their teams as Mechanical Engineers. As a Mechanical Engineer on the EPI team, you will contribute to new product development as well as sustainment and engineering design projects. We are looking for someone who enjoys solving challenging problems, is thorough and detail‑oriented, and can use experimentation and model‑based analysis to identify root causes. Should be able to collaborate effectively with cross‑disciplinary teams to solve complex engineering problems and drive new technological advancements.

Note: This role is intended for candidates who are graduating in Spring 2026 or have graduated within the past two years and have 0–2 years of professional work experience.

What you will be working on

• Apply solid engineering principles, product specifications, and research data to design systems and products for the semiconductor industry.
• Perform engineering calculations, including structural, thermal, and fluid‑dynamics analyses.
• Create and update CAD models and detailed drawings in Creo Parametric, from simple parts to large assemblies.
• Determine design feasibility, troubleshoot technical issues, and develop solutions that meet safety and “first‑time‑right” design requirements using statistical methods.
• Prepare clear, complete engineering documentation to support prototype builds, manufacturing, and testing.
• Conduct project management activities such as schedule creation, reporting, design reviews, and cross‑functional coordination.
• Demonstrate familiarity with common fabrication methods (CNC machining, sheet metal, welding, coatings).
• Collaborate with cross‑functional teams from design and sourcing, introduce new products and ensure smooth transition to manufacturing.
• Execute failure analysis (FA), including planning, real‑time updates, and timely corrective‑action closure.
• Travel to customer sites/supplier sites to participate in technical discussions. 
• Proficiency in Microsoft Office, Creo, and AutoCAD.
• Strong understanding of ANSI Y14.5 GD&T standards.

What we are looking for

• We are looking for candidates who have graduated within the last 0-2 years or will graduate in Spring or Fall 2026 and are eager to begin or advance their career.
• Masters in mechanical engineering or related degree, PhD strongly preferred.
• Cleanroom experience of deposition technologies (CVD, ALD, EPI, PVD), hand-on assembly and testing experiences are strongly preferred

• Experience in course work and projects related to design and development of complex mechanical systems including reactors, vacuum chambers, gas delivery systems, pneumatics, water cooling circuits, and vacuum systems required. 
• Understanding of materials: metals, plastics, surface coatings and surface finishes.
• Excellent verbal and written communication; ability to present design concepts to peers and management in a professional and effective manner. 
• Able to work with a diverse team to achieve requirements and specifications on complex projects. 
• Ability to work in a team environment with aggressive deadlines and multiple priorities while maintaining a team player attitude. 

You are responsible for determining the most effective ways to manufacture quality products or service. Develops ways to increase productivity, maximizes efficiency and process quality. Enable rapid ASM growth without compromising on our products quality and Customers’ satisfaction, driving the quality of our products into a competitive advantage.

In this role you will lead a team to have “end to end” quality assurance of analysing in house Operations and Customers data to set preventive measures on NC.

We are looking for you; self-motivated by nature with a strong ability to define out of the box solutions. Moreover, to perform in-depth analysis and effective proliferation of resolution.

Internal

• Manage Quality Non Conformances – Define caused-by in Intake & filtering
• Manage proper follow-up with Cooperate Quality Team on customer expectations
• Manage timely and good quality closure of NC including preventive actions.
• Setup and maintain Customer Quality Dashboard
• Align with Customers on critical indexes
• Assist local management by proposing process improvements and participate in deployment of new and improved processes
• Assist cooperate functions by initiating, driving and tracking of improvements on the execution of critical processes
• Assist in driving resolution of structural quality issues within corporate programs, e.g. QMS restructuring
• Manage well-structured inspection plans and collaborate with cross functions to improve tests and assembly processes
• Lead and drive quality assurance metrics to targets; including managing contract manufacturers.
• Hands-On guiding the team through 8D methodology to close non-conformances

Requirements

• Demonstrated proven track record to drive problem solving methodology
• Preferably >10 years of experience working in a manufacturing or engineering environment
• Demonstrated ability to influence across organization and drive changes
• Familiar with the following operational excellence tools but not limited to; Lean manufacturing, FMEA, 8D, PDCA, Problem solving, six sigma etc

Professional Experience

• Experience in Capital Equipment building preferably in the Semiconductor industry
• Trained in minimum Green Belt Problem Solving methodology

 Soft Skills

• Exhibits analytical thinking and committed to drive teams to meet business goals
• Strong written, communication, presentation and interpersonal skills
• Self-driven personality & independence

Qualifications

• Degree or equivalent working experience for >15 years