ABOUT THE TEAM

Anduril Intelligence Systems (AIS) is focused on positioning Anduril as a lead provider of specialized engineering and products for Intelligence Community (IC) customers. This role will be an integral partner to Anduril’s Quality team. We work within the IC to understand their requirements, shape their concepts of operation, and deliver exquisite capability across their problem set. We aim to develop and deploy critically needed capabilities that address our customers’ most pressing national security requirements.

ABOUT THE JOB

As a Product Quality Engineer, you will work inside & outside the organization to define, develop, and execute processes that deliver high quality & reliable compute solutions. You will work with responsible engineers who are designing → building → and delivering complex customer programs. You will bring your technical knowledge and leadership skills to set objectives, build teams & processes, and drive projects to completion. The ideal candidate will leverage their experience to deliver highly complex, optimized, multi-disciplinary products and programs. If you are someone who loves to build world-class quality processes with suppliers, work hands-on with engineering, and be accountable for results, then this role is for you.

This role will be based temporarily at Santa Ana, CA for a 6 month training period before transitioning to Asheville, OH permanently.

WHAT YOU’LL DO

• Willingness to engagement with product development Teams to achieve quality expectations for AIS products
• Drive product development to achieve quality experience for AIS products  by implementing product engineering activities like process development, verification, validation, and qualification of processes, parts and sub-assemblies.
• Drive clarity & resolution for development ambiguities associated with product maturity, process stability, and field performance that impact the product meeting it’s quality & reliability goals for volume production.
• Champion the transition from new product introduction (NPI) to a sustainable & predictable, high rate manufacturing process and supply chain.
• Own the elimination of product risk to improve reliability across the product lifecycle. Engage in quality activities from concept through development and manufacturing to field use.
• Ensure the execution of product and process requirements. Assist in Defining and improving such requirements.
• Work cross-functionally to define and execute the product roadmap.
• Lead Root Cause and Corrective Action (RCCA) and Material Review Board (MRB) activities. Review the effectiveness of actions and share lessons learned across the product team.
• Lead product health data analysis and improvement activities. Establish metrics for measuring quality and the factors that predict quality performance.
• Support the continuous improvement of the Quality Management System. Define and improve required documentation and activities.
• Support investigations, initiatives, and projects as needed, at the team or organization level.
• Own the identification and elimination of product quality risk to improve reliability across the product lifecycle. Support the quality planning from production concept/customer requirements through development and manufacturing to field use.
• Ensure the execution of product and process requirements to meet quality performance targets. Define and improve such requirements. Partner with production to ensure incoming material inspection, process control plans, and end of line test capture the essential quality requirements for successful customer shipments.
• Open to travel between HQ (CA) and Ohio based on program needs 

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Engineering or similar technical field
• Experience in Engineering, Manufacturing, or Quality in aerospace/defense or similar hardware.
• Working knowledge of design review and quality management of precision mechanical parts & sub-assemblies, PCBA, harnessing, avionics, systems integration, composites, propulsion systems, and lethality systems.
• Experience driving product quality and performance requirements to test and measurement system development and optimization. Leading the transition from engineering qualification to manufacturing variance testing for product quality coverage.
• Working knowledge of product development methodologies such as Failure Modes and Effects Analysis (FMEA), Advanced Product Quality Planning (APQP), Production Part Approval Process (PPAP) elements such as Measurement Systems Analysis (MSA), and Geometric Dimensioning and Tolerancing (GD&T).
• Working knowledge of mechanical and/or electrical manufacturing processes.
• Application of industry standards and best practices to meet government customer quality expectations.
• A strong ownership mindset with demonstrated capability to drive projects from start to completion.
• Analytical skills and experiences for data mining, data quality, metrics generation, issue management systems, and statistical analysis tools (MatLab, JMP, Minitab, etc.)
• Currently possesses and is able to maintain an active U.S. Secret security clearance.

PREFERRED QUALIFICATIONS

• Master’s degree in a technical field
• 5-7 years of experience with developing quality systems for high volume, high complex manufacturing environments and suppliers.
• Experience in Engineering, Manufacturing, or Quality in for communications systems used for Intelligence Community (IC) customers
• Working knowledge of AS9100/ ISO 9001-based Quality Management System requirements.
• Experience with IPC standards
• Experience with government contracts and mil standard requirements
• Experience with Teamcenter, SolidWorks, Jira, Tableau, and Altium (or other PCBA and harness design software)

ABOUT THE JOB 

We're seeking a full stack Security Software Engineer to develop novel security tooling for securing our suite of products including and detecting potential cybersecurity issues across embedded Linux systems and Android devices. The ideal candidate can develop across the the full stack - from Linux eBPF programs to cloud backends and everything in between.

WHAT YOU’LL DO 

• Design and develop cybersecurity tools for embedded Linux and Android systems.
• Build and maintain backend services with REST APIs running on cloud platforms.
• Create user-friendly frontends using React and TypeScript.
• Manage cloud infrastructure using Terraform and/or AWS CDK.
• Collaborate with cross-functional teams to identify security needs and implement solutions.
• Conduct code reviews and ensure adherence to security best practices.
• Stay updated on the latest security threats and technologies.

REQUIRED QUALIFICATIONS

• 5+ years of software development experience in some combination of Golang, Rust, Kotlin, and TypeScript.
• Proficiency in implementing application backends, including authorization, observability, REST APIs, and NoSQL data persistence.
• Strong experience with frontend development using React and TypeScript.
• Familiarity with cloud infrastructure management (Terraform and/or AWS CDK).
• Experience in mobile development, specifically on Android platforms.
• Understanding of cybersecurity principles and practices.
• Ability to obtain and hold a U.S. Secret security clearance.

PREFERRED QUALIFICATIONS

• Experience with embedded systems and Linux.
• Knowledge of security frameworks and compliance standards.
• Experience with Linux observability and eBPF.
• Experience with CI/CD and test automation, including for mobile devices.
• Strong problem-solving and analytical skills.
• Excellent communication and teamwork abilities.

WE’RE HIRING! If you love data and are looking for unlimited growth opportunities, we want to talk with you about joining Further.

Further is a data, cloud, and AI company whose focus is helping companies turn raw data into the right decisions. We have an award winning culture of extraordinary people. Our purpose is to enable people to thrive so that businesses can thrive. We believe that the work you do should matter - it should be meaningful to you professionally and personally, and it should have a positive impact on both you and our clients.  If this sounds exciting to you, let’s chat!

Cloud Migration Engineer

You are the engineer clients trust to move their infrastructure to GCP without drama. No data loss, no unplanned downtime, no surprises. You've done this before at production depth — not as a supporting player, but as the person who owned the outcome.Half your work is technical: designing the migration architecture, writing the Terraform that makes it repeatable, and executing the cutover with the discipline that comes from having seen what goes wrong. The other half is client-facing: translating messy real-world infrastructure (legacy systems, undocumented dependencies, nervous stakeholders) into a migration plan that the client can understand and the build team can execute.You use AI to work more efficiently. You don't use it as a substitute for knowing what you're doing. You will sit in our headquarters in Dallas, TX on a hybrid schedule. The team is in office on Tuesdays, Wednesdays and Thursdays. 

What experience should you have:

• 8-12 years of cloud engineering experience, with a track record of owning GCP migrations end to end at production depth.
• Proven success migrating production workloads to GCP with no data loss and no unplanned downtime. You can walk us through a migration you owned, what went wrong, and how you handled it.
• Strong Terraform expertise: you write infrastructure as code by default, not as an afterthought.
• Multi-cloud fluency: you understand the source environments clients are migrating from and can map their architecture to GCP equivalents without starting from scratch.
• Consulting or client-facing experience: you can lead a room, manage expectations, and communicate technical risk to people who don't want to hear it.
• Clear, direct written communication: migration plans, runbooks, and handoff docs that someone else can actually use.

Nice to have

• GCP Professional certifications (Cloud Architect, Data Engineer, or equivalent).
• Experience with containerized workloads: GKE, Cloud Run, or equivalent.
• Familiarity with data migration tooling: Database Migration Service, Datastream, Transfer Service.
• Exposure to compliance requirements in migration contexts: data residency, encryption in transit and at rest, audit logging.
• Experience with CI/CD pipeline migration and modernization.

What you’ll be doing in this role:

• Migration architecture and planning: assessing client environments, mapping dependencies, designing the target GCP architecture, and producing a phased migration plan that accounts for real operational constraints.
• Infrastructure as code: writing and maintaining Terraform configurations that make every migration repeatable, auditable, and reversible where it needs to be.
• The cutover: owning the execution of production migrations with zero data loss and no unplanned downtime. You've done this enough times to know where it goes wrong and how to prevent it.
• Client communication: running technical discovery sessions, presenting migration plans to non-technical stakeholders, and keeping clients informed at every phase without burying them in detail.
• Post-migration validation: performance baselines, monitoring setup, and the handoff documentation that means the client isn't dependent on you forever.

Our total rewards program is designed for your protection, peace of mind, and overall well-being. In addition to our outstanding basics, we offer a net-zero cost medical option, company contributions to your HSA, fertility support, fully-paid parental leave, a monthly stipend for your lifestyle spending account, and much more.

Apply today or check out all our opportunities!

#LI-Hybrid

Applicants must be currently authorized to work in the United States on a full-time basis. The company does not anticipate providing sponsorship for employment visa status (e.g., H-1B, TN, etc.) for this individual position.

About the Role

Verkada is seeking an Enterprise Field Solutions Engineer based in Ohio with expert experience in Cloud Security, IoT Systems, Networking, Linux systems, Security Surveillance and Access Control. This individual will partner directly with their territory account executives to expand the Verkada footprint upmarket into Fortune 500 companies.  Responsibilities include directly interfacing with customers/partners throughout the sales process, overcoming technical objections, assisting customers in designing deployments with Verkada Products and providing technical assistance to territory account reps. The ideal candidate will be highly motivated, able to learn quickly and work independently while making impactful results for the company remotely. 

What You'll Do

• Technical Leader: Be the subject matter authority on the full Verkada suite of products and offerings and articulate the value added benefits to customers throughout the sales process.
• Objection Handler: Overcome objections and defuse landmines while securing the technical win for Verkada.
• Evangelist: Effectively present the Verkada solution to all levels of customer, from C-level executives to loss prevention managers and directors of IT. Be a Product Technical Evangelist in training/educating partners, customers, and internal employees on the latest Verkada product offerings.
• This role requires regular travel, estimated to be more than 50% of the time, including both domestic and international destinations as needed. The successful candidate must be comfortable with frequent travel to support business operations, customer and partner engagements and team collaboration. 

What You Bring

• 3+ years of experience as a Sales Engineer, with a proven track record of working with Fortune 500 companies.
• Outstanding written and verbal English communication skills in order to clearly and efficiently articulate technical matters with customers and partners.
• Bachelor's degree in relevant technical or security field  from an accredited university.
• Strong background in Networking: HTTPS, VLANs, TCP/IP, DNS, NAT devices, DHCP and Firewalls.
• Bonus:
• Industry certifications: AWS, CCNA, CCDA, CCNP, MCSE, CEH, Security+, A+, Network+, Microsoft Azure, CISSP, CSP.
• Experience working with Active Directory, SAML/SCIM, API's, Python, and other coding languages is a plus.
• Startup experience.

Employee Benefits

Verkada is committed to fostering a workplace environment that prioritizes the holistic health and wellbeing of our employees and their families by offering comprehensive wellness perks, benefits, and resources. Our benefits and perks programs include, but are not limited to:

• Healthcare programs that can be tailored to meet the personal health and financial well-being needs - Premiums are 100% covered for the employee under at least one plan and 80% for family premiums under all plans
• Nationwide medical, vision and dental coverage
• Health Saving Account (HSA) with annual employer contributions and Flexible Spending Account (FSA) with tax saving options
• Expanded mental health support
• Paid parental leave policy & fertility benefits
• Time off to relax and recharge through our paid holidays, firmwide extended holidays, flexible PTO and personal sick time
• Professional development stipend
• Wellness/fitness benefits
• Healthy lunches provided daily
• Commuter benefits

Additional Information

• You must be independently authorized to work in the U.S. We are unable to sponsor or take over sponsorship of an employment visa for this role, at this time.

ABOUT THE JOB

Anduril’s Supply Chain team is seeking an Senior Material Flow Engineer to join us. Working with a global network of suppliers, to support a global manufacturing platform takes people who are willing to work hard and find ways to win. As an Industrial Engineer, you will have the responsibility to optimize Anduril’s supply chain's warehousing and material flow operations for best-in-class quality, reliability, speed, and asset utilization, all while meeting critical customer deployment and internal development timelines. Executing on this responsibility will entail active collaboration with other Anduril teams, including but not limited to Supply Chain, Engineering, Quality, and Business Operations.

The right person for this role can demonstrate past holistic ownership on solving operational challenges with creative solutions in a fast-paced, resource-limited environment. This person will be flexible to provide support wherever needed to ensure products are built and shipped under stringent quality standards. If you are someone who thrives in such an environment, then this role is for you.

WHAT YOU'LL DO

• Passionately work across multiple programs from development to full rate production to scale best-in-class solutions to align with maturity of manufacturing process
• Proactively identify imbalances and bottlenecks caused by inventory processes, line layouts, parts shortages, staffing shortages, and other production constraints; flag constraints with the appropriate owners across Supply Chain, Manufacturing Engineering, and Quality and drive to resolution
• Own the metrics, KPIs, and reporting associated with monitoring production line health and efficiency, such as cycle time, throughput rate, capacity, utilization, process non-conformities, and inventory accuracy.
• Time studies of current and developing processes to ensure efficiency across warehouse and operations.
• Develop processes to optimize workplans for highly variable demands across multiple sites.
• Translate tools and reports into actionable tasks that impact the health of warehouse operations across a plethora of processes and sites.
• Produce and maintain tools to increase accuracy of work demand for new facilities and maturing processes using a data-driven approach using tools such as Value Stream Mapping/ Process Mapping/ Line Balancing techniques
• Be badass and make an impact to the warehouse team. Value incremental improvements and push them to the floor as quickly as possible. Then iterate until we reach a world-class level.

REQUIRED QUALIFICATIONS

• Bachelor’s degree in engineering 
• 5+ years of experience in a high-rate supply chain or manufacturing environment, where complex mechanical and/or electrical assemblies are built with heavy data utilization
• Ability to read technical documentation such as drawings and CAD data, understanding of a variety of hardware manufacturing processes for both electronics (PCBAs, sensor hardware, etc.) and structures, mechanical components, and electromechanical systems
• Ability to travel up to 25% of the time
• Ability to relocate, if not already local to be onsite in Columbus, OH

PREFERRED QUALIFICATIONS

• Experience with using Siemens Plant Simulation, Visual Components, or Process Simulation software to model a production line and run production scenarios
• Experience with department or factory design and set up - value stream mapping, flow lines, continuous flow, one piece flow, workstation design
• Ability to completely own a value chain from start to finish, measuring each step of the process, creating actionable tasks that culminated in a significant and sustainable business improvement
• Demonstrated ability of presenting project results to a cross functional team with clearly relating data to proposed next steps
• Prior experience with a Manufacturing Execution System (MES) for production operations or Warehouse Management System (WMS)
• Prior knowledge of NetSuite, Oracle or a similar Enterprise Resource Planning (ERP) system
• Experience implementing Lean Manufacturing principles which drive manufacturing productivity
• Experience in delivering successful project by being hands on with the process. Including gemba walks, operational analysis, poka yoke solutions among others to allow teams to be successful without massive CAPEX
• Experience interacting with SQL databases - storage of information and building custom queries for tracking production and inventory-related metrics

ABOUT THE TEAM

We are seeking a Senior Quality Engineer to support flight line operations in Victorville, CA before relocating to Arsenal-1 in Q1 2027. This role is on the Quality Engineering team and will focus on quality assurance and process integrity for aircraft operations, integration, and testing directly on the flight line. Your expertise will bridge development engineering, production, and field operations to ensure aircraft functionality and performance under real-world conditions. You will have direct involvement with diagnosing and resolving issues as they arise in the field, providing critical support to the aircraft’s final integration, troubleshooting, and operational readiness.

ABOUT THE ROLE

In this role as a Senior Quality Engineer, the ideal candidate would support operations at our Victorville, CA facility before joining our rapidly growing team in Ashville, OH. This is a dynamic and hands-on position with opportunities in managing flight-line quality assurance activities and driving improvements in the aircraft integration process. This position is ideal for someone who thrives in a high-stakes environment, loves to implement innovative solutions, and takes ownership of ensuring precision and quality during critical phases of aircraft ground and flight operations.

**This role requires candidates to relocate to Victorville, CA until Q1 2027. Housing, transportation, etc. will be provided during your stay. Following completion of flight line duties at our Victorville site, this role would then turn into a full time position at our Arsenal-1 facility in Ashville, OH.

WHAT YOU'LL DO

• Personify quality oversight and support during aircraft maintenance, ground testing, and flight testing. Monitor flight line activities to ensure adherence to stringent quality standards, safety protocols, and detailed technical procedures.
• Conduct thorough pre-flight checks and audits to verify the readiness of systems, structures, and components. Develop and execute inspection systems tailored to flight line and operational support requirements.
• Lead RCCA initiatives specifically targeting issues arising during test and maintenance, and sustainment. Address in-field non-conformance issues and resolve immediate defects impacting operational readiness.
• Partner closely with manufacturing engineers, test engineers, field operations teams, and pilots to resolve technical and quality issues. Evaluate system & process performance directly within operational environments.
• Provide real-time technical and quality support during flight testing, ensuring data is accurately captured, defects are analyzed, and adjustments are rapidly implemented in subsequent iterations.
• Drive continuous improvement of flight line processes, testing protocols, and operator procedures to mitigate risks and enhance operational efficiency.
• Support quality documentation efforts specific to flight-line activities, including inspection logs, NCR metrics, pre-flight investigation reports, and detailed performance summaries.

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Engineering or similar technical field
• 5+ years of experience in Quality, Manufacturing, flight test, sustainment, or Engineering roles with direct involvement in aircraft testing activities
• Strong working knowledge of aviation systems, subsystems integration, and mechanical/electrical manufacturing processes
• Familiarity with flight-line processes, operational readiness requirements, and troubleshooting under time constraints
• Experience working directly with DCMA and military customers from enlisted to senior officers.
• Knowledge of government regulations affecting aviation systems, defense contracts, and flight certification
• Experience with quality management of complex systems such as propulsion , flight controls, avionics, mission systems, fuel, hydraulics, and structural components
• Hands-on experience with pre-flight and post-flight inspection guidelines, quality audits, and troubleshooting processes
• Expertise in product quality methodologies such as FMEA, APQP, and FAI
• Knowledge of Geometric Dimensioning and Tolerancing (GD&T) applied to aerospace systems
• Experience working with measurement tools
• Demonstrated ability to drive projects to completion in fast-paced environments requiring quick decision-making
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• 7+ years of experience with military aircraft flight line operations, quality systems, or production processes
• Working knowledge of AS9100, AS6500, and ISO 9001-based quality management systems
• Familiarity with IPC standards for electronics and MIL standards for aerial vehicle integration
• Experience with Manufacturing Readiness Levels
• Hands-on experience using Teamcenter, SolidWorks/NX, Jira, and manufacturing execution systems

Coho Consulting Group is seeking an experienced Senior Cloud Engineer to provide expert-level functional and systems analysis for complex IT applications and enterprise environments. This role is responsible for designing, integrating, and implementing scalable cloud and hybrid-cloud solutions while delivering strategic technical guidance to program leadership and customers. The ideal candidate will bring deep expertise in DoD cloud environments, modern infrastructure design, and emerging technologies such as AI integration. This is a hybrid-remote position with on-site support required at Ft. Meade, MD; Columbus, OH; or Ogden, UT.

Responsibilities (include but are not limited to):

• Assess existing DoD cloud and traditional hosting environments to develop integrated architectures that optimize performance, interoperability, security, and cost efficiency
• Lead the design and implementation of automated solutions supporting application migration and ongoing operations
• Architect and support cloud and hybrid-cloud solutions across enterprise environments
• Translate functional requirements into scalable, secure, cloud-enabled architectures
• Conduct implementation planning, including risk analysis and mitigation strategies
• Troubleshoot and resolve complex issues related to application migration, integration, and cloud infrastructure
• Design and support AI-enabled solutions and infrastructure for federal environments
• Develop clear, comprehensive technical and functional documentation
• Collaborate with cross-functional teams, stakeholders, and executive leadership to deliver mission-aligned solutions

Essential Job Qualifications and Requirements:

• Security Clearance:

• Active Secret clearance (required)

• Education and Certifications:
• Bachelor’s degree in Computer Science, Systems Engineering, Statistics, or a related technical field
• Cisco Certified Network Associate (CCNA) certification (preferred)

• Required Experience and Skills:
  • Proven experience in systems analysis and solution design within DoD environments
  • Hands-on experience with cloud platforms such as AWS and/or Azure
  • Demonstrated success deploying and managing cloud-based solutions
  • Experience integrating enterprise networking technologies (Cisco, Juniper, Palo Alto, F5)
  • Strong background in configuring and implementing cloud networking services
  • Experience integrating AI-based solutions within federal or enterprise systems

• Technical Expertise
  • Design and management of:
    • Virtual Networks (VNet)
    • Virtual Private Cloud (VPC) environments
    • Hybrid cloud architectures
  • Cloud migration strategies and execution
  • Infrastructure automation and orchestration

ABOUT THE SITE

Anduril, a leader in autonomous systems and weapons manufacturing, today announced it has selected Columbus, Ohio as the location of Arsenal-1, its first hyperscale manufacturing facility. Arsenal-1 will redefine the scale and speed that autonomous systems and weapons can be produced for the United States and its allies and partners. This is a monumental and essential step toward rebuilding America’s defense industrial base, strengthening America’s warfighting capabilities, and enhancing deterrence amid rising international threats.

ABOUT THE PRODUCT

The future of defense is being built right now, and Anduril’s Roadrunner product is at its leading edge. Roadrunner is a cutting-edge VTOL (Vertical Take-Off and Landing) counter-UAS interceptor, designed for autonomous air defense operations. It rapidly detects, tracks, and neutralizes hostile unmanned aircraft systems to protect critical assets and personnel.

ABOUT THE TEAM

The Roadrunner Team (RLT) will set the standard for building the future at Arsenal-1, our state-of-the-art manufacturing facility in Ashville, OH. This team will have the opportunity to train under our world-class manufacturing team at Anduril HQ in Costa Mesa, CA for 3 months before bringing that standard of excellence back to Ohio.

ABOUT THE JOB

This role is about much more than just processes; it's about orchestrating the industrialization of a vital product. You will own the entire manufacturing value-chain for Roadrunner, from current rate to high-volume deployment. Your responsibilities will span the spectrum: driving Design for Manufacturability (DFM) feedback into design, innovating tool design and selection, creating and optimizing high-rate production lines, fostering strategic vendor partnerships, embedding robust quality assurance throughout, and meticulously documenting build processes.

If you thrive under the pressure of scaling a critical product with immediate, real-world impact, we want you to help us build the next generation of Roadrunner products.

**This role requires candidates to relocate to Costa Mesa for a 3-month training program. Housing, transportation, etc. will be provided during your stay.

WHAT YOU'LL DO

• Lead the manufacturing of a certain product or set of products, from initial prototyping through large full-scale production.
• Work with design engineers during the development process to drive design for manufacturing best practices into the design effort, and help facilitate the transition from design to prototype to rate production.
• Lead the manufacturing requirements for mechanical fabrication and avionics with subject matter expertise in these areas and key experience in design for manufacturability.
• Own documentation required for successfully manufacturing product group hardware at scale, such as MBOM’s, work instructions & requirements, etc.
• Lead quality management and business application programs as they pertain to manufacturing within your area.
• Collaborate with internal customers and manufacturing planning teams to define capacity planning actions to meet customer needs and expectations.
• Analyze metrics for continuous improvement initiatives (cost reduction, QI reduction & capacity increase).
• Instill a culture of innovation, teamwork, and accountability within the manufacturing engineering product team.
• Develop production and test methodologies and implement best practices to enable scaling production capabilities for larger, more complex products.
• Travel to suppliers and partner sites to do initial sourcing work, solve ongoing production issues, and implement process procedures as required.
• Manage and train junior staff, focusing on creating efficient production processes, optimizing assembly, and ensuring technical growth within the engineering team.

REQUIRED QUALIFICATIONS

• Degree in a technical field preferred such as engineering, math, or a hard science
• 10+ years of experience in a relevant field, preferably manufacturing or design of electromechanical hardware
• Demonstrated ability to creatively deliver electromechanical hardware in a resource-constrained environment
• An attitude of world-class mission assurance, quality, attention to detail, and dedication.
• A genuine interest in manufacturing and thirst for learning
• Candidates must demonstrate flexibility and dedication, being prepared to work extended hours and weekends when dictated by critical business priorities
• Regular travel between our various locations is an essential component of this role
• U.S. Citizen Required

PREFERRED QUALIFICATIONS

• Exposure to aircraft programs or other relevant aerospace & defense technologies
• Software scripting experience in any language
• Lean Six Sigma certification (Green Belt or higher) or equivalent experience
• Familiarity with J-STD-001, IPC-A-610, and IPC/WHMA-A-620 or equivalent standards

ABOUT THE TEAM

We're seeking a Senior Threat and Attack Research Engineer to join our Security organization. The ideal candidate will combine threat intelligence knowledge with strong engineering skills to develop and implement advanced threat actor tracking and analsyis systems to protect Anduril products and infrastructure.

WHAT YOU’LL DO

• Monitor and analyze sophisticated cyber threats targeting Anduril's products, infrastructure, and personnel.
• Research, mitigate, and anticipate emerging technical trends in the threat landscape.
• Collaborate closely with the detection and response team to provide timely and actionable intelligence to support ongoing investigations.
• Engage cross functionally with the offensive security team on product and infrastructure red team engagements.
• Enhance tooling for threat actor tracking and intelligence data integration.
• Foster proactive collaboration and information exchange with external partners to build joint capabilities and achieve shared objectives.

REQUIRED QUALIFICATIONS

• Proven experience analyzing complex threat actor campaigns, including supply chain and infrastructure, with the ability to develop long term countermeasures.
• Proficiency in one or more programming languages (e.g. Python, Rust, Golang, Swift)
• Capacity to prioritize and execute tasks independently with minimal supervision.
• Strong and professional communication skills (written and verbal)
• Ability to obtain and hold a U.S. Secret security clearance.

PREFERRED QUALIFICATIONS

• In-depth knowledge of nation-state, sophisticated criminal, or supply chain threats.
• Experience creating file-based or network-based rules and signatures (e.g. YARA, Snort) for detection and tracking complex threats.
• Track record of writing production code for threat intelligence tools
• Expertise in large scale data analysis
• Established connection within the broader security and threat intel community
• Strong analytical and problem-solving capabilities.
• Demonstrated ability to work effectively in team environments.
• Experience with Vertex Synapse

ABOUT THE JOB:

We are looking for Senior Software Engineers to join our Internal Tools team. As a Senior Software Engineer on Anduril’s Internal Tools team you will be architecting and implementing mission-critical applications that enforce lean business process, add multiplicative leverage to Anduril employees, and scale Anduril into a next-generation defense prime.

As a member of the internal tools team you will be an integral part of building out QualityOS—Anduril’s custom production quality management system. Your decisions will have a large impact on the company today and into the future. We are looking not only for a software engineer that has a knack for quickly understanding complex systems, but one that dives in and creates features driving bottom-line value for the business.

A Software Engineer in this role should possess strong collaborative skills to integrate seamlessly into a team focused on revolutionizing manufacturing through innovative tools and insights. The ideal candidate will have expertise in developing custom software solutions that optimize production processes, analyze manufacturing data, and drive industry-changing improvements.

WHAT YOU'LL DO:

• Work in a mini-startup environment to create elegant SaaS or on-premise solutions that are better than what current market solutions can offer.
• Level up our team’s applications through quality code contribution.
• Have an area of deep expertise in a portion of the full stack (i.e. backend, frontend, integration).
• Work with a high-functioning team of developers with an emphasis on finishing business-critical projects
• Automate company operations to drive bottom-line dollar savings

REQUIRED QUALIFICATIONS:

• Willingness to work with the team on-site on a rotation for shift 2 (~3pm - 11pm)
• 5+ years of experience in a software engineering role building products, ideally in a fast-paced environment
• Degree in Computer Science, Information Systems, Electrical Engineering or related technical degree
• Experience working with large enterprise applications and platforms with high availability requirements
• Proficiency with web-based technologies such as Javascript, React, Typescript, or other web-development frameworks such as Remix or NextJS
• Ability to empathize with end-users, to turn needs into features, and to balance user experience with engineering constraints
• U.S. Person status is required as this position needs to access export controlled data

PREFERRED QUALIFICATIONS:

• We encourage people from all backgrounds to apply but our tech stack uses AWS, Typescript, and React/Remix so familiarity with all of these tools will be particularly helpful
• Experience in hyper growth startup-like environments. Demonstrated successes in scaling and maturing software development processes, team culture and methods, and ability to balance short-term and long-term trade offs
• Eligible to obtain and maintain a U.S. TS/S clearance
• Experience with quality management & incident management systems (QMS)
• Experience leveraging SOTA AI models and agentic tooling for software development

ABOUT THE PRODUCT

ABOUT THE TEAM

Anduril’s Manufacturing Team is seeking a Senior Industrial Engineer to join our team with an emphasis on manufacturing optimization. The role will support the development of simulation and optimization models to predict the behavior of manufacturing processes to drive real world adaptations. Executing on this responsibility will entail active collaboration with other Anduril teams, including but not limited to Supply Chain, Engineering, Quality, and Business Operations. The Manufacturing Team is responsible for rapidly iterating and building cutting-edge defense hardware, including static equipment, moving ground equipment, sensors, undersea, and flight vehicles, and scaling these products in our new 5M sq ft manufacturing facility, Arsenal-1.

ABOUT THE ROLE

The right person for this role can demonstrate holistic ownership on solving operational challenges with creative solutions in a fast-paced, resource-limited environment. This person will be flexible to change and ambiguity in their working environment, while working to ensure products are built and shipped on-time under stringent quality standards. If you are someone who thrives as the connective tissue among operational stakeholders to bring a production team forward, then this role is for you.

ABOUT THE TEAM

Anduril’s Manufacturing Team is seeking a Senior Industrial Engineer to join our team. The role will support the development of simulation and optimization models to predict the behavior of manufacturing processes to drive real world adaptations. Executing on this responsibility will entail active collaboration with other Anduril teams, including but not limited to Supply Chain, Engineering, Quality, and Business Operations. The Manufacturing Team is responsible for rapidly iterating and building cutting-edge defense hardware, including static equipment, moving ground equipment, sensors, undersea, and flight vehicles, and scaling these products in our new 5M sq ft manufacturing facility, Arsenal-1.

ABOUT THE ROLE

The right person for this role can demonstrate holistic ownership on solving operational challenges with creative solutions in a fast-paced, resource-limited environment. This person will be flexible to change and ambiguity in their working environment, while working to ensure products are built and shipped on-time under stringent quality standards. If you are someone who thrives as the connective tissue among operational stakeholders to bring a production team forward, then this role is for you.

This role will be based temporarily at Santa Ana, CA for a 3 month training period before transitioning to Asheville, OH.

WHAT YOU'LL DO

• Capture the current process including all physical constraints, business rules and detailed decision logic into a 3D simulation-based virtual factory to serve as process and operational knowledge base
• Create feasible results, plans and schedules for shop floor, warehouse, factory & supply chain execution in all the relevant time ranges by ensuring that all scheduled operations are resource capacity, material, and timeline feasible
• Maintain an adaptive, data generated and driven virtual factory to always retain a “current status” digital reference model for determining future performance of the factory/supply chain whenever required for different transformation projects and investment decisions
• Own the design of new production lines and work station layouts, both for low rate and full-rate production, leveraging a data-driven approach
• Proactively identify high variation processes, imbalances and bottlenecks caused by line layout, equipment constraints, staffing shortages, and other production inputs; flag constraints with the appropriate owners across Manufacturing, Supply Chain, Engineering, and Quality and drive to resolution
• Translate and drive action from metrics, KPIs, and reporting associated with monitoring production line health and efficiency, such as cycle time, throughput rate, capacity, utilization, and first pass yield
• Produce and maintain capacity plans, balanced line layouts, staffing allocations, and time standards for manufacturing work content
• Collaborate and drive operational improvements end-to-end for next-generation defense products as we scale in maturity and production rate
• Work across domains, from execution-based work to the strategic future state of a product or business line

REQUIRED QUALIFICATIONS

• 8+ years past experience in a fast-paced manufacturing environment
• Experience with Technomatix “Plant Sim” simulation software or equivalent DES (Promodel, FlexSim, Simio, etc,) OR basic knowledge in object-oriented computer programming (example languages: Python, R, C++, Java, etc.) OR working with large data sets with SQL or No-SQL
• Ability to read technical documentation such as facility drawings, assembly drawings, technical specifications and procedures for manufacturing processes for electronics, mechanical and electromechanical assembly, system tests, and/or structures work
• Ability to work in ambiguity
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Bachelor's degree in Manufacturing Engineering, Industrial Engineering, or related technical field
• Prior work designing and/or setting up new production lines or factories - from process mapping through to collaborating with infrastructure design partners and detailed work station design
• Experience with Lean Manufacturing and/or Continuous Improvement and Six Sigma principles in action
• Experience interacting with data via data visualization applications or SQL queries
• Ability to completely own a value chain from start to finish, measuring each step of the process, creating actionable tasks that culminated in a significant and sustainable business improvement
• Prior experience with ERP, WMS and MES systems
• Knowledge stochastic \ deterministic models when to apply them
• Proficient in handling large data sets, including filtering, identifying trends, and graphical representation.
• Candidate should have knowledge of design engineering and manufacturing engineering processes including:
• 3D CAD design/modeling of parts and assemblies
• 3D factory layout
• Manufacturing process planning of fabricated parts, and complex discrete assembly process
• Manufacturing simulation of assembly processes, human ergonomics, and discrete event simulation
• Strong manufacturing data analytics and statistical analysis background with proficiency in statistical process control

Anduril is seeking a Senior Material Review Board (MRB) Engineer to join our Fury Team in Columbus, Ohio. The MRB Engineer will be responsible for managing disposition of nonconformances, conducting engineering analysis, and ensuring compliance with quality standards and design intent. This role is crucial for supporting production efficiency and maintaining product integrity throughout the manufacturing process. The MRB Engineer will act as the on-site technical liaison between production operations, design, and quality.

WHAT YOU'LL DO

• Review and assess nonconformance reports (NCRs) and coordinate with cross-functional teams to determine the disposition of nonconforming materials.
• Provide dispositions for minor variance conditions on completed aircraft, major assemblies, and detail level components. Coordinate with vendor design authorities for disposition of supplier designed components.
• Own the Material Review Board (MRB) process for evaluating production escapes and deviations.
• Conduct root cause analysis on nonconformance issues, identifying underlying problems and recommending corrective actions.
• Support investigations and root cause analysis to ensure timely resolution of quality issues impacting production.
• Collaborate with engineering, production, and quality teams to ensure alignment on inspection & repair methods and compliance with relevant standards.
• Maintain accurate records of nonconformance cases, dispositions, and MRB activities.
• Prepare and present reports on nonconformance trends and metrics to management and stakeholders.
• Drive process improvements based on findings from nonconformance reviews, audits, and customer feedback.
• Participate in quality system audits to ensure compliance and identify opportunities for enhancement.

REQUIRED QUALIFICATIONS

• Bachelors Degree in Mechanical, Aerospace, Manufacturing, or Materials Engineering
• 5+ years of experience in engineering roles, preferably within an aerospace or defense manufacturing environment.
• Excellent understanding of MRB processes and nonconformance management.
• Strong problem-solving and analytical skills with attention to detail.
• Excellent communication and interpersonal skills to work effectively with cross-functional teams.
• Knowledge of quality management systems (QMS) and relevant standards (e.g., AS9100, ISO9001).
• Experience with root cause analysis techniques and quality improvement methodologies.
• Must be able to obtain and hold a U.S. security clearance

PREFERRED QUALIFICATIONS

• Previous MRB Experience
• Experience in design, analysis, assembly, or repair roles
• Experience on aircraft production line
• Understanding of stress analysis techniques

Anduril is seeking a Senior Quality Engineer to join our Fury Team in Columbus, Ohio. The ideal candidate will be responsible for ensuring that our Group 5 Autonomous Vehicle product meets the highest quality standards from the design phase to the production phase of the product life cycle. The right person for this role has knowledge of manufacturing, product development, and continuous improvement for Group 5 Autonomous Vehicles. If you are someone who loves to build world-class Quality processes, work hands-on, and be accountable for results, then this role is for you.

WHAT YOU'LL DO:

• Work closely with the design team to ensure that quality is built into the product from the outset.
• Develop and maintain a comprehensive understanding of the product design and manufacturing processes for the overall vehicle,
• Collaborate with internal & external functions to define and execute processes that deliver reliable products. Direct quality engineers for direction and opportunities in sub-systems, processes, production, and supplier development areas.
• Develop and implement quality control plans and procedures for the Group 5 Autonomous Vehicle product.
• Conduct quality audits and inspections to identify and address any issues that arise during the product development process.
• Collaborate with cross-functional teams to identify and resolve quality issues.
• Develop and maintain quality metrics to track product quality and identify areas for improvement.
• Ensure that all quality-related documentation is complete, accurate, and up-to-date.
• Ensure the execution of product and process requirements. Define and improve such requirements.
• Work cross-functionally to define and execute the product roadmap.
• Set up and lead Root Cause and Corrective Action (RCCA) and Material Review Board (MRB) activities. Review the effectiveness of actions and share lessons learned across the product team.
• Lead product health data analysis and improvement activities. Be able to communicate the top line quality of the project
• Support the continuous improvement of the Quality Management System. Define and improve required documentation and activities.
• Support investigations, initiatives, and projects as needed, at the team or organization level.

REQUIRED QUALIFICATIONS:

• Bachelor’s degree in Engineering or similar technical field
• Experience in Engineering, Manufacturing, or Quality and production processes. Experience in growing and developing teams and managing resources.
• Working knowledge of design review and quality management of aviation systems, PCBA, harnessing, avionics, systems integration, composites/control surfaces, propulsion systems, and lethality systems.
• Experience driving product quality and performance requirements to test and measurement system development and optimization. Knowledgeable of missile storage and maintenance processes.
• Experience partnering with Reliability Engineering, chief engineers, architects, and customer facing team members to deliver to customer requirements.
• Working knowledge of product development methodologies such as Failure Modes and Effects Analysis (FMEA), Advanced Product Quality Planning (APQP), Production Part Approval Process (PPAP) elements such as Measurement Systems Analysis (MSA), and Geometric Dimensioning and Tolerancing (GD&T).
• Working knowledge of mechanical and/or electrical manufacturing processes. Application of industry standards and best practices
• A strong ownership mindset with demonstrated capability to drive projects from start to completion.
• Analytical skills and experiences for data mining, data quality, metrics generation, issue management systems, and statistical analysis tools (MatLab, JMP, MiniTab, etc)
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS:

• Master’s degree in a technical field
• 5-7 years of experience with developing quality systems for low volume, high complex manufacturing environments and suppliers. Working knowledge of AS9100/ AS6500 / ISO 9001-based Quality Management System requirements.
• Experience with IPC standards and general workmanship standards.
• Experience with government contracts and MIL standard requirements commonly applied to quality requirements for aerial vehicles. Experience with Teamcenter, SolidWorks/NX, Jira, Foundry, and manufacturing execution systems

ABOUT THE SITE

Anduril, a leader in autonomous systems and weapons manufacturing, is building Arsenal-1, its first hyperscale manufacturing facility, just south of Columbus, Ohio in Pickaway County. Arsenal-1 is redefining the scale and speed that autonomous systems and weapons can be produced for the United States and its allies and partners. This is a monumental and essential step toward rebuilding America’s defense industrial base, strengthening America’s warfighting capabilities, and enhancing deterrence amid rising international threats.

ABOUT THE PRODUCT

The future of defense is being built right now, and Anduril’s Roadrunner product is at its leading edge. Roadrunner is a cutting-edge VTOL (Vertical Take-Off and Landing) counter-UAS interceptor, designed for autonomous air defense operations. It rapidly detects, tracks, and neutralizes hostile unmanned aircraft systems to protect critical assets and personnel.

ABOUT THE TEAM

The Roadrunner Team (RLT) will set the standard for building the future at Arsenal-1, our state-of-the-art manufacturing facility in Ashville, OH. This team will have the opportunity to train under our world-class manufacturing team at Anduril HQ in Costa Mesa, CA for 3 months before bringing that standard of excellence back to Ohio.

ABOUT THE JOB

This role is about much more than just processes; it's about orchestrating the industrialization of a vital product. You will own the entire manufacturing value-chain for Roadrunner, from current rate to high-volume deployment. Your responsibilities will span the spectrum: driving Design for Manufacturability (DFM) feedback into design, innovating tool design and selection, creating and optimizing high-rate production lines, fostering strategic vendor partnerships, embedding robust quality assurance throughout, and meticulously documenting build processes.

If you thrive under the pressure of scaling a critical product with immediate, real-world impact, we want you to help us build the next generation of Roadrunner products.

**This role requires candidates to relocate to Costa Mesa for a 3-month training program. Housing, transportation, etc. will be provided during your stay.

WHAT YOU'LL DO

• Own the manufacturing of a certain product or set of products, from initial prototyping through large full-scale production.
• Work with design engineers during the development process to drive design for manufacturing best practices into the design effort, and help facilitate the transition from design to prototype to rate production.
• Own the manufacturing requirements for mechanical fabrication and avionics with subject matter expertise in these areas and key experience in design for manufacturability.
• Own documentation required for successfully manufacturing product group hardware at scale, such as MBOM’s, work instructions & requirements, etc.
• Lead quality management and business application programs as they pertain to manufacturing within your area.
• Collaborate with internal customers and manufacturing planning teams to define capacity planning actions to meet customer needs and expectations.
• Analyze metrics for continuous improvement initiatives (cost reduction, QI reduction & capacity increase).
• Instill a culture of innovation, teamwork, and accountability within the manufacturing engineering product team.
• Develop production and test methodologies and implement best practices to enable scaling production capabilities for larger, more complex products.
• Travel to suppliers and partner sites to do initial sourcing work, solve ongoing production issues, and implement process procedures as required.
• Mentor and train junior staff, focusing on creating efficient production processes, optimizing assembly, and ensuring technical growth within the engineering team.

REQUIRED QUALIFICATIONS

• Degree in a technical field preferred such as engineering, math, or a hard science
• 6+ years of experience in a relevant field, preferably manufacturing or design of electromechanical hardware
• Demonstrated ability to creatively deliver electromechanical hardware in a resource-constrained environment
• An attitude of world-class mission assurance, quality, attention to detail, and dedication.
• A genuine interest in manufacturing and thirst for learning
• Candidates must demonstrate flexibility and dedication, being prepared to work extended hours and weekends when dictated by critical business priorities
• Regular travel between our various locations is an essential component of this role
• U.S. Citizen Required

PREFERRED QUALIFICATIONS

• Exposure to aircraft programs or other relevant aerospace & defense technologies
• Software scripting experience in any language
• Lean Six Sigma certification (Green Belt or higher) or equivalent experience
• Familiarity with J-STD-001, IPC-A-610, and IPC/WHMA-A-620 or equivalent standards

ABOUT THE JOB

Anduril's Manufacturing Engineering is seeking a Senior Manufacturing Equipment Engineer to join our team. The Manufacturing Engineering department develops and implements robust manufacturing processes and tooling solutions to ensure Anduril's defense products are produced efficiently, reliably, and at scale at Anduril.

As a Senior Manufacturing Equipment Engineer, you will support continuous operations and enable world class manufacturing of cutting edge defense products. As a Sustaining Equipment Engineer, you will drive Overall Equipment Efficiency (OEE) by continuously enhancing critical systems, including PLC/HMI logic, robotics, mechanical/electrical subsystems, and conveyance infrastructure. You will also play a key role in cross-functional teams, developing, introducing, and ensuring the long-term sustainment of new models, products, and materials. The right person for the role has a proven track record of significantly improving Overall Equipment Efficiency through sophisticated automation enhancements and successful collaboration on new product development.. If you are someone who has an analytical mindset, a relentless drive for continuous improvement in OEE, and excellent collaboration skills to work effectively across teams, then this role is for you.

This role will be based temporarily at Santa Ana, CA for a 3 month training period before transitioning to Asheville, OH. 

WHAT YOU’LL DO

• Analyze and optimize production equipment to ensure safety while maximizing Overall Equipment Effectiveness (OEE) in cost effective means while driving to achieve world-class quality levels
• Champion continuous improvement projects to maximize yield, cycle time, and availability of equipment. Report metrics to upper management
• Work hand in hand with process engineering and maintenance teams to resolve equipment issues, improve equipment reliability, and provide technical guidance
• Support operations to aggressively ramp newly launched products to full-scale production
• Develop Scada system to monitor, gather, and process real-time production data
• Perform in-depth root cause analysis for equipment failures and implement robust corrective and preventive actions to enhance system reliability and uptime.
• Collaborate with cross-functional teams including design engineering, quality, and production to ensure production related issues are rapidly resolved

REQUIRED QUALIFICATIONS

• Bachelor's degree in Electrical Engineering, Mechanical Engineering, Manufacturing Engineering, or a related technical field.
• 8+ years of experience in a manufacturing environment, specifically focused on equipment engineering, automation, or reliability.
• Demonstrated expertise in programming and troubleshooting PLCs (e.g., Allen-Bradley, Siemens), HMIs, and industrial automation systems.
• Strong understanding of robotics, motion control systems, and mechanical/electrical subsystems in a production setting.
• Proven ability to lead and execute continuous improvement initiatives (e.g., Lean, Six Sigma) resulting in measurable OEE gains.
• Strong troubleshooting and problem-solving skills with ability to implement effective solutions quickly
• Excellent problem-solving abilities, analytical skills, and attention to detail.
• Experience working in a fast-paced, high-volume manufacturing environment.
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Experience with Vision Systems for automated inspection and guidance.
• Proficiency in CAD software (e.g., SolidWorks, AutoCAD) for equipment design and layout.
• Lean Six Sigma certification (Green Belt or Black Belt).
• Prior experience in the defense, aerospace, or med-tech industries.
• Currently possesses and is able to maintain an active U.S. Secret security clearance

Anduril is seeking a Sr Manufacturing Test Engineer to join our Fury Launch Team (FLT) in Columbus, Ohio. This role will focus on developing, implementing, and executing test procedures for aircraft systems and components, ensuring compliance with performance and safety standards. The ideal candidate will have a strong background in testing methodologies and aerospace manufacturing processes.

WHAT YOU'LL DO

• Design and develop test plans, procedures, and automated test systems for aircraft components and systems.
• Validate and deploy test systems on the production line to ensure compliance with product specifications.
• Conduct testing on aircraft systems and components, documenting results and ensuring compliance with quality standards.
• Analyze test data to identify trends, issues, and areas for improvement.
• Perform root cause analysis on any discrepancies or failures during testing.
• Collaborate with engineering and production teams to implement corrective actions and preventive measures.
• Identify opportunities for process improvements in testing methodologies and equipment.
• Implement best practices to enhance testing efficiency and reliability.
• Maintain thorough documentation of test procedures, results, and compliance with regulatory standards.
• Prepare and present test reports to stakeholders and project teams.
• Work closely with cross-functional teams to support troubleshooting and failure analysis.
• Provide technical support and training to production personnel regarding test equipment and procedures.

REQUIRED QUALIFICATIONS

• Bachelors Degree in Mechanical, Aerospace, Electrical, or Manufacturing Engineering
• 7+ years of experience in production test engineering or a related role, preferably in the aerospace industry.
• Strong understanding of testing methodologies and practices in an aerospace manufacturing environment.
• Proficient in root cause analysis and problem-solving techniques.
• Excellent written and verbal communication skills.
• Must be able to obtain and hold a U.S. security clearance

PREFERRED QUALIFICATIONS

• Familiarity with test automation tools and software.
• Understanding of electrical and mechanical systems used in aircraft production.
• Experience with low observable (LO) and survivability testing is a plus.

ABOUT THE JOB

Anduril's Manufacturing Engineering is seeking a Senior Manufacturing Tooling Engineer to join our team in Ohio. The Manufacturing Engineering department develops and implements robust manufacturing processes and tooling solutions to ensure Anduril's defense products are produced efficiently, reliably, and at scale at Anduril.

As Manufacturing Tooling Engineer, you will design, develop, and maintain innovative tooling systems that enhance our manufacturing capabilities and production efficiency. The right person for this role has strong mechanical design skills, expertise in CAD software, experience with tool fabrication processes, and knowledge of manufacturing systems integration. If you are someone who thrives in a fast-paced environment, enjoys solving complex tooling challenges, and is passionate about supporting cutting-edge defense technology manufacturing with creative tooling solutions then this role is for you.

This role will be based temporarily at Santa Ana, CA for a 3 month training period before transitioning to Asheville, OH.

WHAT YOU’LL DO

• Build things that build things
• Design and develop custom tooling, fixtures, and jigs to support manufacturing operations across multiple product lines
• Design integrated end of arm tooling for manufacturing operations that demand high quality and repeatability
• Create detailed technical drawings, 3D models, and specifications for tool fabrication using advanced CAD software
• Troubleshoot and resolve tooling-related issues in production environments to minimize downtime
• Collaborate with cross-functional teams including design engineers, manufacturing engineers, and production staff to integrate tooling solutions with manufacturing systems
• Conduct failure analysis on tooling and implement design improvements to enhance performance and durability. Develop and release PM procedures.
• Manage tooling budgets, vendor relationships, and outside fabrication of specialized tooling
• Support continuous improvement initiatives aimed at reducing costs and improving manufacturing throughput
• Ensure all tooling designs comply with safety standards and regulatory requirements

REQUIRED QUALIFICATIONS 

• Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or related technical field
• 8+ years of experience in manufacturing tooling design and implementation
• Expert capability with (at least one) 3D CAD software (NX, SolidWorks, Inventor, or CATIA)
• Demonstrated experience with tooling design for precision manufacturing processes
• Knowledge of machining processes, materials properties, and manufacturing methods
• Expert in GD&T (Geometric Dimensioning and Tolerancing)
• Currently possesses and is able to maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS 

• Experience in defense, aerospace, or other high-reliability manufacturing environments
• Knowledge of automation systems and integration with tooling solutions
• Experience with tool lifecycle management and maintenance planning
• Familiarity with lean manufacturing principles and Six Sigma methodologies
• Background in rapid prototyping and iterative design

ABOUT THE SITE

Anduril, a leader in autonomous systems and weapons manufacturing, is building Arsenal-1, its first hyperscale manufacturing facility, just south of Columbus, Ohio in Pickaway County. Arsenal-1 is redefining the scale and speed that autonomous systems and weapons can be produced for the United States and its allies and partners. This is a monumental and essential step toward rebuilding America’s defense industrial base, strengthening America’s warfighting capabilities, and enhancing deterrence amid rising international threats.

ABOUT THE PRODUCT

The future of defense is being built right now, and Anduril’s Roadrunner product is at its leading edge. Roadrunner is a cutting-edge VTOL (Vertical Take-Off and Landing) counter-UAS interceptor, designed for autonomous air defense operations. It rapidly detects, tracks, and neutralizes hostile unmanned aircraft systems to protect critical assets and personnel.

ABOUT THE TEAM

The Roadrunner Launch Team (RLT) will set the standard for building the future at Arsenal-1, our state-of-the-art manufacturing facility in Ashville, OH. This team will have the opportunity to train under our world-class manufacturing team at Anduril HQ in Costa Mesa, CA for 3 months before bringing that standard of excellence back to Ohio.

ABOUT THE JOB

The Quality Specialist is a professional who is responsible for monitoring, inspecting and proposing measures to correct or improve the incoming inspection process to meet quality standards. They are a highly motivated team player who is willing to support a fast paced team environment. They will partner across the organization and help prioritize process and product quality issues that impact the effectiveness of the incoming materials inspection process as well as provide support for end of line supplier inspection. Also, as a quality specialist, they are responsible for monitoring, inspecting and proposing measures to correct or improve the final product quality standard. This role will focus on both product quality issues as well as process issues that impact efficiencies and completeness of of the inspection operations.

**This role requires candidates to relocate to Costa Mesa for a 3-month training program. Housing, transportation, etc. will be provided during your stay.

WHAT YOU’LL DO

• Manages the site Materials Review Board (MRB) process
• Partner with Site Supplier Quality Engineering Organization to support Supplier Quality Control
• Assist in the root cause analysis
• Assist in the dispositioning of non-conforming material and ensure the tasks are completed in a timely manner
• Manage internal re-work to support dispositions.
• Ensure data collection and entry is accurate and complete for the MRB process
• Communicate the process performance and quality issues to key stakeholders to drive improvements
• Execute vendor return material authorization (RMA) with partnership between Warehouse and Buyers to ensure material leaves the MRB area for suppliers.
• Inspect to verify non-conforming parts and perform investigations related to nonconforming parts.
• Manage quality containment process for material, tooling, and inspection equipment that are involved in non-conformances impacting production capacity and capability.
• Create inspection plans for incoming material, in-process inspection steps, and end of line inspection, as per direction from product quality engineers. Execute inspection as needed.
• Train technicians and inspectors to execute inspection plans and data capture in the process.
• Propose, develop and implement quality assurance policies and procedures and review with the product quality engineers
• Review and propose continuous improvement projects for productivity gains, quality improvements, and benefits to Anduril's quality policy.
• Stay current with new inspection technologies and techniques and recommend improvements to the inspection process
• Perform Verification of First Article Inspection (FAI) on incoming material and coordinate acceptance of FAI data submitted by suppliers.

REQUIRED QUALIFICATIONS

• 5+ years of experience in a quality role
• Experience with production support and quality management
• Proficiency with computer-aided design (CAD) software and inspection data management software.
• Ability to work independently and as part of a team.
• Attention to detail and strong organizational skills.
• Experience with Calibrated equipment (calipers, micrometers, CMM, Faro arm, OMM, etc.)
• Knowledge & understanding of dimensioning and tolerancing as per Geometric Dimensioning and Tolerancing (GD&T)
• Experience reading and interpreting engineering drawings (wire diagrams, work instructions, CAD)
• Analyze inspection results and provide feedback to production, manufacturing engineering, and quality engineering departments.
• Experience in a facility with AS9100, ISO9001, IATF 16949 or similar QMS standard
• Detail oriented self starter with minimal oversight - strong ability to communicate with different cross functional teams.
• U.S. Citizen Required

PREFFERED QUALIFACTIONS

• Technical or Associates degree in related quality/mechanical/aerospace engineering field
• IPC-A-610 or IPC-A-620 Certification
• ASQ Certified Quality Engineer, Quality Improvement Associate, or equivalent.
• Experience using investigative equipment such as x-ray inspection, digital characterization, material certificate of compliance, etc.
• Knowledge of 6 sigma, TQM, TPS, Lean, Low Rate Production
• Experience with inspection of Electrical and Electronic Components (Power Supplies, PCBs, wire-harnesses)
• Experience with Manufacturing processes and their related systems (Jira, MES, ERP, Teamcenter, CAD)
• Experience with auditing processes and procedures in a manufacturing environment
• Experience with communicating with suppliers and cross functional teams
• Experience with validation and testing assemblies and their components

HOURLY RATE

• T4 Starting Hourly Rate: $31.00

ABOUT THE JOB 

We're seeking a Security Software Engineer with a specialization in crypto services and key management to develop novel security tooling for securing our suite of products. The ideal candidate can develop, test, and debug embedded software with mission-critical security responsibilities.

WHAT YOU’LL DO

• Design and develop cybersecurity tools for realtime embedded, embedded Linux, and Android systems.
• Design and develop resilient software supporting all phases of key handling on embedded systems - from key load through sanitization.
• Develop thorough testing and qualification procedures for security critical components.
• Collaborate with cross-functional teams to identify specific security needs and implement solutions.
• Conduct code reviews and ensure adherence to security best practices.
• Stay updated on the latest security threats and technologies.

REQUIRED QUALIFICATIONS 

• 2+ years of software development experience in some combination of Golang, Rust, or C/C++.
• Experience selecting and utilizing embedded HSMs and Secure Elements.
• Experience with CI/CD and test automation, including for mobile and embedded devices.
• Experience debugging embedded systems using common test equipment - logic analyzers, oscilloscopes, etc.
• Solid understanding of cybersecurity principles and practices.
• Ability to obtain and hold a U.S. Secret security clearance.

PREFERRED QUALIFICATIONS 

• Knowledge of security frameworks and compliance standards.
• Experience in mobile development, specifically on Android platforms.
• Familiarity with cloud infrastructure management (Terraform and/or AWS CDK).
• Experience implementing solutions compliant with US Government key handling requirements.
• Strong problem-solving and analytical skills.
• Excellent communication and teamwork abilities.

ABOUT THE JOB 

We're seeking a Security Software Engineer to develop novel security tooling for securing embedded Linux systems and Android devices. The ideal candidate can develop, test, and debug an endpoint detection and response agent with mission critical security responsibilities.

WHAT YOU’LL DO

• Design and develop cybersecurity tools for realtime embedded, embedded Linux, and Android systems.
• Implement an endpoint detection and response agent for use on Anduril products.
• Develop thorough testing and qualification procedures for security critical components.
• Collaborate with cross-functional teams to identify specific security needs and implement solutions.
• Conduct code reviews and ensure adherence to security best practices.
• Stay updated on the latest security threats and technologies.

REQUIRED QUALIFICATIONS 

• 2+ years of software development experience in some combination of Golang, Rust, or C/C++.
• Experience with Linux observability and eBPF.
• Strong understanding of Linux security internals.
• Experience debugging and optimizing performance of Linux software.
• Experience with CI/CD and test automation, including for mobile and embedded devices.
• Solid understanding of cybersecurity principles and practices.
• Ability to obtain and hold a U.S. Secret security clearance.

PREFERRED QUALIFICATIONS 

• Knowledge of security frameworks and compliance standards.
• Experience in mobile development, specifically on Android platforms.
• Experience implementing EDR tooling.
• Experience with SOC operations, forensics, and incident response practices.
• Strong problem-solving and analytical skills.
• Excellent communication and teamwork abilities.

ABOUT THE JOB 

Anduril is seeking a Product Data Engineer to join our Fury Team in Columbus, Ohio.  The Product Data Engineer is responsible for change control activities supporting the Autonomous Airpower production line.  As a Product Data Engineer  you will work closely with the leaders of critical Anduril programs to manage a highly dynamic and fast-paced design, engineering, and manufacturing environment. The Product Data Engineer will have a massive impact on capturing and defining the baseline for a program’s requirements, design, testing, manufacturing, and sustainment data structures (requirements baseline, EBOM, MBOM, SOM, BOP). 

WHAT YOU'LL DO

• Be a partner to Product and Program teams by:
  • Working with Anduril system, design, and manufacturing engineers to generate, populate and submit configuration item change requests.
  • Preparing critical analyses to support change requests while maintaining configuration integrity and traceability (item dependency analyses, test analyses, effectivity plans, inventory disposition analyses etc.)
  • Supporting the execution and implementation of change notices across system engineering, design engineering, manufacturing engineering, and supply chain domains.
  • Identifying and executing continuous improvement opportunities by building data-driven perspectives of the full product configuration landscape. 

• Be the leader of critical configuration management activities and forums by:
  • Supporting configuration managers in managing critical program technical forums (Test Review Board, Change Control Board etc.).
  • Working with program teams to prepare for critical technical forums (the Change Review Board, the Change Control Board) including preparing of business cases, test data, effectivity plans, inventory disposition plans, etc.
  • Documenting and distributing conclusions, decisions emerging from configuration management forums. 

• Conduct periodic product configuration record audits by:
  • Supporting configuration management reviews and audits, including FCA/PCA and providing direction before, during and after the events to prevent or resolve issues.
  • Reconciling released bills of materials against baseline bills of materials by confirming all variances have signed-off change notices.
  • Reconciling product as-built-records against released bills of materials by confirming all variances have quality deviations.
  • Identifying, analyzing resolving non-conformances; finding and resolving root-causing failure modes. 

• Be an expert resource for the Product Teams for Engineering Release and Change Management processes and standards by:
  • Using Teamcenter software to manage Engineering changes, including part revisions, EBOM/MBOM/SBOM updates, documentation modifications, and associated workflows.
  • Providing guidance and support to Engineering teams in configuring the Engineering, Manufacturing, and Service Bills of Materials (EBOM, MBOM, SBOM)
  • Supporting Configuration Managers and Engineers in defining and maintaining configurable product data sets (i.e., 150% BOMs, product variant dictionaries and schema).
  • Being a Teamcenter super-user and able to train product team users on workflows. 

• Be part of the team defining the future of digital engineering at Anduril by:
  • Partnering with engineering teams to set requirements and identify improvement opportunities in existing ways of working by creating tools or enhancing existing workflows.
  • Building an end-to-end digital thread that maintains an accurate product definition, system by system, from the definition of requirements to the as maintained record.
  • Identifying and piloting opportunities to leverage Anduril’s AI capabilities tools to unlock increased speed, accuracy, and efficiency within Anduril’s configuration management activities. 

REQUIRED QUALIFICATIONS 

• 2-5 years of configuration analysis or equivalent experience. 

• 2-5 years of demonstrated experience working in high complexity and high-rate production environments (aerospace, automotive, security systems, medical devices, nuclear). 

• Familiar with configuration management principles and practices (EIA649/C, MIL-HDBK-61B). 

• Experience with product lifecycle management (PLM) and/or data management toolsets for configuration management of complex products 

• Possess high attention to detail and strong organizational skills. 

• Excellent written and verbal communication skills – you must have an ability to synthesize complex quantitative data into clear decision statements. 

• BA/BS degree. 

• Ability to earn trust, maintain positive and professional relationships, and contribute to our inclusive culture. 

• Is able to obtain and maintain a U.S. security clearance. 

PREFERRED QUALIFICATIONS 

• Proven experience in aerospace industry.

• Proficient in technical writing of processes and procedures.

• Experience with Teamcenter, Teamcenter Requirements, Teamcenter Quality, Confluence & JIRA. 

• Database skills with SQL queries, etc. 

• Certification in CM2 or equivalent configuration management certification. 

ABOUT THE SITE

Anduril, a leader in autonomous systems and weapons manufacturing, is building Arsenal-1, its first hyperscale manufacturing facility, just south of Columbus, Ohio in Pickaway County. Arsenal-1 is redefining the scale and speed that autonomous systems and weapons can be produced for the United States and its allies and partners. This is a monumental and essential step toward rebuilding America’s defense industrial base, strengthening America’s warfighting capabilities, and enhancing deterrence amid rising international threats.

ABOUT THE PRODUCT

The future of defense is being built right now, and Anduril’s Roadrunner product is at its leading edge. Roadrunner is a cutting-edge VTOL (Vertical Take-Off and Landing) counter-UAS interceptor, designed for autonomous air defense operations. It rapidly detects, tracks, and neutralizes hostile unmanned aircraft systems to protect critical assets and personnel.

ABOUT THE TEAM

The Roadrunner Launch Team (RLT) will set the standard for building the future at Arsenal-1, our state-of-the-art manufacturing facility in Ashville, OH. This team will have the opportunity to train under our world-class manufacturing team at Anduril HQ in Costa Mesa, CA for 3 months before bringing that standard of excellence back to Ohio.

ABOUT THE ROLE

As a Product Quality Engineer, you will work inside & outside the organization to define, develop, and execute processes that deliver high quality & reliable products. This role focuses on our Road Runner product with career growth to any of our products in the development and sustaining stages. The right person for this role has knowledge of manufacturing, product development, root cause analysis, and issue management and continuous improvement of manufacturing nonconformance's. If you are someone who loves to build world-class quality processes, work hands-on, and be accountable for results, then this role is for you.

**This role requires candidates to relocate to Costa Mesa for a 3-month training program. Housing, transportation, etc. will be provided during your stay.

WHAT YOU’LL DO

• Drive product improvement for Road Runner by implementing processes for data collection and incident reporting that will inform activities like detailed design reviews, process development, verification, validation, and qualification of processes and parts, sub-assy, and the vehicle, itself.
• Drive clarity & resolution for development ambiguities associated with product maturity, process stability, and field performance that impact the product meeting it’s quality & reliability goals for volume production.
• Lead Root Cause and Corrective Action (RCCA) activities for field and reliability issues. Review the effectiveness of actions and share lessons learned across the product team.
• Champion the transition from new product introduction (NPI) to a sustainable & predictable, high rate manufacturing process and supply chain.
• Own the elimination of product risk to improve reliability across the product lifecycle. Engage in quality activities from concept through development and manufacturing to field use.
• Ensure the execution of product and process requirements. Define and improve such requirements.
• Work cross-functionally to define and execute the product roadmap.
• Lead product health data analysis and improvement activities. Establish metrics for measuring quality and the factors that predict quality performance.
• Support the continuous improvement of the Quality Management System. Define and improve required documentation and activities.
• Support investigations, initiatives, and projects as needed, at the team or organization level.

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Engineering or similar technical field
• Experience in Engineering, Manufacturing, or Quality in aerospace/defense or similar hardware.
• Experience leading root cause corrective action (RCCA) efforts for complex problems and issues. Utilizing tools such as 8D, Lean six sigma, Fault tree analysis, and DMAIC methodologies.
• Working knowledge of design review and quality management of PCBA, harnessing, avionics, systems integration, composites, propulsion systems, and lethality systems.
• Working knowledge of product development methodologies such as Failure Modes and Effects Analysis (FMEA), Advanced Product Quality Planning (APQP), Production Part Approval Process (PPAP) elements such as Measurement Systems Analysis (MSA), and Geometric Dimensioning and Tolerancing (GD&T).
• Working knowledge of mechanical and/or electrical manufacturing processes.
• A strong ownership mindset with demonstrated capability to drive projects from start to completion.
• Analytical skills and experiences for data mining, data quality, metrics generation, issue management systems, and statistical analysis tools (MatLab, JMP, MiniTab, etc)
• U.S. Citizen Required

PREFERRED QUALIFICATIONS

• Master’s degree in a technical field
• 2-5 years of experience with developing quality systems for low volume, high complex manufacturing environments and suppliers.
• Working knowledge of AS9100/ ISO 9001-based Quality Management System requirements.
• Experience with IPC standards
• Experience with Electronics, Software, Aviation or Avionics.
• Lean six sigma certification is preferred.
• Experience with Teamcenter, SolidWorks, Jira, Foundry, NetSuite, or Oracle.

ABOUT THE JOB

Anduril is seeking a Senior Manufacturing Engineer to join our Fury Team in Columbus, Ohio. The Senior Manufacturing Engineer is responsible for rapidly iterating and building cutting-edge defense hardware, including static equipment, moving ground equipment, and flight vehicles. This responsibility includes everything in the manufacturing value-chain, including, but not limited to, Design for Manufacturability work, tool design & selection, process creation & optimization, vendor sourcing & interaction, quality planning, and work documentation associated with the hardware that the Senior Manufacturing Engineer owns.

Rebuild the Arsenal

WHAT YOU'LL DO

• Own a portion or all of the manufacturing value chain for a certain product or set of products
• Develop novel tooling solutions for fabrication and assembly of structural parts
• Develop process flows, breaking down large, complex assemblies into a logical part flow of subassemblies and sub-processes
• Write documentation required for successfully manufacturing their hardware at scale, such as work instructions, quality plans, inspection requirements, etc.
• Work with contract manufacturers across various disciplines (PCBA fab, metallic manufacturing, assembly, etc.) to develop repeatable, sustained processes for quick-turn development as well as at-scale production
• Work with technicians and other engineers hands-on, building prototype hardware
• Contribute to end-customer hardware mechanical or electrical design, including interconnects, board fabrication and inspection, etc.
• Travel to suppliers to do initial sourcing work, solve ongoing production issues, and implement quality procedures

REQUIRED QUALIFICATIONS

• Bachelors Degree in Mechanical, Aerospace, or Manufacturing Engineering
• 10+ years of experience in manufacturing engineering - preferably in the aerospace industry
• Demonstrated in-kind or direct team leadership skills, with backing examples
• Knowledge in CAD and production planning tools - ERP, MES, etc.
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Hands-on experience with R/C and/or autonomous flight vehicles, flight controllers, or other related control systems
• Experience with automation and robotics
• Knowledge in composites and advance manufacturing

ABOUT THE SITE

Anduril, a leader in autonomous systems and weapons manufacturing, is building Arsenal-1, its first hyperscale manufacturing facility, just south of Columbus, Ohio in Pickaway County. Arsenal-1 is redefining the scale and speed that autonomous systems and weapons can be produced for the United States and its allies and partners. This is a monumental and essential step toward rebuilding America’s defense industrial base, strengthening America’s warfighting capabilities, and enhancing deterrence amid rising international threats.

ABOUT THE PRODUCT

The future of defense is being built right now, and Anduril’s Roadrunner product is at its leading edge. Roadrunner is a cutting-edge VTOL (Vertical Take-Off and Landing) counter-UAS interceptor, designed for autonomous air defense operations. It rapidly detects, tracks, and neutralizes hostile unmanned aircraft systems to protect critical assets and personnel.

ABOUT THE TEAM

The Roadrunner Team (RLT) will set the standard for building the future at Arsenal-1, our state-of-the-art manufacturing facility in Ashville, OH. This team will have the opportunity to train under our world-class manufacturing team at Anduril HQ in Costa Mesa, CA for 3 months before bringing that standard of excellence back to Ohio.

ABOUT THE JOB

This role is about much more than just processes; it's about orchestrating the industrialization of a vital product. You will own the entire manufacturing value-chain for Roadrunner, from current rate to high-volume deployment. Your responsibilities will span the spectrum: driving Design for Manufacturability (DFM) feedback into design, innovating tool design and selection, creating and optimizing high-rate production lines, fostering strategic vendor partnerships, embedding robust quality assurance throughout, and meticulously documenting build processes.

If you thrive under the pressure of scaling a critical product with immediate, real-world impact, we want you to help us build the next generation of Roadrunner products.

**This role requires candidates to relocate to Costa Mesa for a 3-month training program. Housing, transportation, etc. will be provided during your stay.

WHAT YOU'LL DO

• Execute the manufacturing of a certain product or set of products, from initial prototyping through large full-scale production.
• Work with design engineers during the development process to drive design for manufacturing best practices into the design effort, and help facilitate the transition from design to prototype to rate production.
• Act as a manufacturing liason for mechanical fabrication and avionics with subject matter expertise in these areas and key experience in design for manufacturability.
• Own documentation required for successfully manufacturing product group hardware at scale, such as MBOM’s, work instructions & requirements, etc.
• Advise on quality management and business application programs as they pertain to manufacturing within your area.
• Collaborate with internal customers and manufacturing planning teams to define capacity planning actions to meet customer needs and expectations.
• Analyze metrics for continuous improvement initiatives (cost reduction, QI reduction & capacity increase).
• Instill a culture of innovation, teamwork, and accountability within the manufacturing engineering product team.
• Develop production and test methodologies and implement best practices to enable scaling production capabilities for larger, more complex products.
• Travel to suppliers and partner sites to do initial sourcing work, solve ongoing production issues, and implement process procedures as required.

REQUIRED QUALIFICATIONS

• Degree in a technical field preferred such as engineering, math, or a hard science
• 3+ years of experience in a relevant field, preferably manufacturing or design of electromechanical hardware
• Demonstrated ability to creatively deliver electromechanical hardware in a resource-constrained environment
• An attitude of world-class mission assurance, quality, attention to detail, and dedication.
• A genuine interest in manufacturing and thirst for learning
• Candidates must demonstrate flexibility and dedication, being prepared to work extended hours and weekends when dictated by critical business priorities
• Regular travel between our various locations is an essential component of this role
• U.S. Citizen Required

PREFERRED QUALIFICATIONS

• Exposure to aircraft programs or other relevant aerospace & defense technologies
• Software scripting experience in any language
• Lean Six Sigma certification (Green Belt or higher) or equivalent experience
• Familiarity with J-STD-001, IPC-A-610, and IPC/WHMA-A-620 or equivalent standards

ABOUT THE JOB

Anduril's Manufacturing Engineering is seeking a Manufacturing Equipment Engineer to join our team. The Manufacturing Engineering department develops and implements robust manufacturing processes and tooling solutions to ensure Anduril's defense products are produced efficiently, reliably, and at scale at Anduril.

As a Manufacturing Equipment Engineer, you will support continuous operations and enable world class manufacturing of cutting edge defense products. As a Sustaining Equipment Engineer, you will drive Overall Equipment Efficiency (OEE) by continuously enhancing critical systems, including PLC/HMI logic, robotics, mechanical/electrical subsystems, and conveyance infrastructure. You will also play a key role in cross-functional teams, developing, introducing, and ensuring the long-term sustainment of new models, products, and materials. The right person for the role has a proven track record of significantly improving Overall Equipment Efficiency through sophisticated automation enhancements and successful collaboration on new product development.. If you are someone who has an analytical mindset, a relentless drive for continuous improvement in OEE, and excellent collaboration skills to work effectively across teams, then this role is for you.

This role will be based temporarily at Santa Ana, CA for a 3 month training period before transitioning to Asheville, OH. 

WHAT YOU’LL DO

• Analyze and optimize production equipment to ensure safety while maximizing Overall Equipment Effectiveness (OEE) in cost effective means while driving to achieve world-class quality levels
• Champion continuous improvement projects to maximize yield, cycle time, and availability of equipment. Report metrics to upper management
• Work hand in hand with process engineering and maintenance teams to resolve equipment issues, improve equipment reliability, and provide technical guidance
• Support operations to aggressively ramp newly launched products to full-scale production
• Develop Scada system to monitor, gather, and process real-time production data
• Perform in-depth root cause analysis for equipment failures and implement robust corrective and preventive actions to enhance system reliability and uptime.
• Collaborate with cross-functional teams including design engineering, quality, and production to ensure production related issues are rapidly resolved

REQUIRED QUALIFICATIONS

• Bachelor's degree in Electrical Engineering, Mechanical Engineering, Manufacturing Engineering, or a related technical field.
• 5+ years of experience in a manufacturing environment, specifically focused on equipment engineering, automation, or reliability.
• Demonstrated expertise in programming and troubleshooting PLCs (e.g., Allen-Bradley, Siemens), HMIs, and industrial automation systems.
• Strong understanding of robotics, motion control systems, and mechanical/electrical subsystems in a production setting.
• Proven ability to lead and execute continuous improvement initiatives (e.g., Lean, Six Sigma) resulting in measurable OEE gains.
• Strong troubleshooting and problem-solving skills with ability to implement effective solutions quickly
• Excellent problem-solving abilities, analytical skills, and attention to detail.
• Experience working in a fast-paced, high-volume manufacturing environment.
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Experience with Vision Systems for automated inspection and guidance.
• Proficiency in CAD software (e.g., SolidWorks, AutoCAD) for equipment design and layout.
• Lean Six Sigma certification (Green Belt or Black Belt).
• Prior experience in the defense, aerospace, or med-tech industries.
• Currently possesses and is able to maintain an active U.S. Secret security clearance

ABOUT THE JOB

As a Software Engineer in the Manufacturing Test organization, you will join a software development team tasked to ensure that we build quality products - in land, sea, and air. You will develop test executive software that can systematically and thoroughly test our products and create analytics to improve our development cycle. You will champion automation, and work to reduce operator time and instruction complexity through the use of parallel execution, data acquisition, automated deployment tools. You will be presented complex, multiplatform problems with heavy reliance on cloud data systems. In this role you’ll need to think creatively and continuously improve our methods of automation, throughput, user interfaces, and data analytics.

This role will be based temporarily at Santa Ana, CA for a 3 month training period before transitioning to Asheville, OH.

WHAT YOU’LL DO

• Develop applications for Windows and Linux desktop environments
• Integrate cloud data and deployment features while maintaining user authentication and security
• Generate automation scripts (python) for debug and prototype development
• Triage issues, root cause failures, and coordinate next-steps
• Partner with end-users to turn needs into features while balancing user experience with engineering constraints

REQUIRED QUALIFICATIONS

• Expertise in desktop application development with WPF and C#.
• Proficient in ASP.NET, RESTful services with C# in AWS/Azure infrastructure.
• Hands-on working knowledge of a major relational database (DB2, SQL Server etc.) and/or NoSql.
• Experience working in CI/CD and designing and delivering DevOps automation for app deployment and testing.
• Bachelor’s degree in Computer Science, Computer Engineering, or related field.
• Experience working on multi-disciplinary projects, working closely with Electrical / Mechanical / Manufacturing Engineers.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

PREFERRED QUALIFICATIONS

• 5+ years of relevant industry experience.
• Pursuing a Master’s of Computer Science or related field.
• Experience with test automation or cloud deployment tools.
• Currently possesses and is able to maintain an active U.S. Secret security clearance.

ABOUT THE JOB

As a Manufacturing Test Engineer you will be responsible for ensuring that we are testing our systems to stringent standards ensuring that we are consistently shipping the highest quality products to our customers. Additionally you will ensure that we are able to meet the required throughput requirements of production. In this role you’ll need to think creatively and come up with solutions to solve difficult testing problems and push to continuously improve our methods of automation, throughput, user interfaces, and data analytics.

This role will be based temporarily at Santa Ana, CA for a 3 month training period before transitioning to Asheville, OH.

WHAT YOU'LL DO

• Maintain ownership of test activities in production and ensuring production test flow. Provide hands-on troubleshooting efforts and resolve complex electrical issues found during testing.
• Maintain test capabilities across the manufacturing value stream - from system level checkouts and acceptance testing to key component level in process validation.
• Improve and sustain existing test systems to improve automation, consistency, total cycle time, and test coverage (DfM).
• Generate test work instructions that can be easily followed by technician team in MES. Train technicians on equipment use as required.
• Develop library of common failure modes with troubleshooting guide/diagrams for fast issue resolution.
• Determine root cause of product failures and recommend appropriate corrective actions (RCCA).
• Work with Design, Quality and Manufacturing Engineering teams to support customer returns and failure analysis.
• Contribute feedback to early-stage test design for test processes supporting early-stage products (NPI).
• Analyze test data, document results, and provide detailed reports to identify defects and areas for improvement.
• Collaborate with design engineers to provide feedback and recommendations for product enhancements based on test outcomes.
• Optimize test strategies for efficiency and effectiveness, reducing test time without compromising quality.
• Maintain and calibrate test equipment to ensure precision and reliability.
• Support continuous improvement initiatives by identifying opportunities to enhance testing processes and methodologies.
• Execute testing as required.

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Electrical/Electronics, Computer, Mechanical Engineering, or related fields
• 5+ years of relevant industry experience with emphasis on manufacturing test and product sustainment.
• Familiarity with Linux, Ubuntu, LabVIEW, and NixOS.
• Experience with contract manufacturers in the testing of PCBA/electronic assemblies. Thorough knowledge of PCBA testing standards and methods.
• Familiarity with electronics test equipment such as power supplies, electronic loads, oscilloscope, function generators, spectrum analyzers, data acquisition and measurement sensors.
• Strong root cause analysis skills of non-conforming hardware.
• Excellent written, verbal, interpersonal and communication skills.
• Familiar with Product Life Cycle (PLM) systems, Manufacturing Execution Systems (MES), and Test Execution Systems (TES)
• Experience working on projects that involve the integration of electrical, mechanical, and software/firmware systems.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

PREFERRED QUALIFICATIONS

• 8+ years of relevant industry experience.
• Pursuing a Master’s of Science in Electrical Engineering, Electronics Engineering Mechanical Engineering, Computer Science or related field.
• Familiarity with Python, LabVIEW, and/or MATLAB for data parsing and data visualization.
• Experience with test automation, PCBA design, and mechanical design.
• Experience with computer hardware communication protocols: USB, Ethernet, RS232, RS485, PCIe, HDMI, CAN, etc.
• Experience with ESS-related testing (Thermal, Vibration, etc.)
• Currently possesses and is able to maintain an active U.S. Secret security clearance

ABOUT THE SITE

Anduril, a leader in autonomous systems and weapons manufacturing, is building Arsenal-1, its first hyperscale manufacturing facility, just south of Columbus, Ohio in Pickaway County. Arsenal-1 is redefining the scale and speed that autonomous systems and weapons can be produced for the United States and its allies and partners. This is a monumental and essential step toward rebuilding America’s defense industrial base, strengthening America’s warfighting capabilities, and enhancing deterrence amid rising international threats.

ABOUT THE PRODUCT

The future of defense is being built right now, and Anduril’s Roadrunner product is at its leading edge. Roadrunner is a cutting-edge VTOL (Vertical Take-Off and Landing) counter-UAS interceptor, designed for autonomous air defense operations. It rapidly detects, tracks, and neutralizes hostile unmanned aircraft systems to protect critical assets and personnel.

ABOUT THE TEAM

The Roadrunner Team (RLT) will set the standard for building the future at Arsenal-1, our state-of-the-art manufacturing facility in Ashville, OH. This team will have the opportunity to train under our world-class manufacturing team at Anduril HQ in Costa Mesa, CA for 3 months before bringing that standard of excellence back to Ohio.

ABOUT THE JOB

Anduril is seeking a Manufacturing Test Engineer to join our Roadrunner Team (RLT) in Columbus, Ohio. This role will focus on developing, implementing, and executing test procedures for systems and components, ensuring compliance with performance and safety standards. The ideal candidate will have a strong background in testing methodologies and aerospace manufacturing processes.

If you thrive under the pressure of scaling a critical product with immediate, real-world impact, we want you to help us build the next generation of Roadrunner products.

**This role requires candidates to relocate to Costa Mesa for a 3-month training program. Housing, transportation, etc. will be provided during your stay.

WHAT YOU'LL DO

• Design and develop test plans, procedures, and automated test systems for aircraft components and systems
• Validate and deploy test systems on the production line to ensure compliance with product specifications
• Conduct testing on aircraft systems and components, documenting results and ensuring compliance with quality standards
• Analyze test data to identify trends, issues, and areas for improvement
• Perform root cause analysis on any discrepancies or failures during testing
• Collaborate with engineering and production teams to implement corrective actions and preventive measures
• Identify opportunities for process improvements in testing methodologies and equipment
• Implement best practices to enhance testing efficiency and reliability
• Maintain thorough documentation of test procedures, results, and compliance with regulatory standards
• Prepare and present test reports to stakeholders and project teams
• Work closely with cross-functional teams to support troubleshooting and failure analysis
• Provide technical support and training to production personnel regarding test equipment and procedures

REQUIRED QUALIFICATIONS

• Bachelors Degree in Mechanical, Aerospace, Electrical, or Manufacturing Engineering
• 3+ years of experience in production test engineering or a related role, preferably in the aerospace industry
• Strong understanding of testing methodologies and practices in an aerospace manufacturing environment
• An attitude of world-class mission assurance, quality, attention to detail, and dedication
• Candidates must demonstrate flexibility and dedication, being prepared to work extended hours and weekends when dictated by critical business priorities
• Regular travel between our various locations is an essential component of this role
• U.S. Citizen Required

PREFERRED QUALIFICATIONS

• Familiarity with test automation tools and software
• Understanding of electrical and mechanical systems used in aircraft production
• Software scripting experience in any language
• Lean Six Sigma certification (Green Belt or higher) or equivalent experience
• Familiarity with J-STD-001, IPC-A-610, and IPC/WHMA-A-620 or equivalent standards

ABOUT THE JOB

Anduril's Manufacturing Engineering is seeking a Manufacturing Tooling Engineer to join our team in Ohio. The Manufacturing Engineering department develops and implements robust manufacturing processes and tooling solutions to ensure Anduril's defense products are produced efficiently, reliably, and at scale at Anduril.

As Manufacturing Tooling Engineer, you will design, develop, and maintain innovative tooling systems that enhance our manufacturing capabilities and production efficiency. The right person for this role has strong mechanical design skills, expertise in CAD software, experience with tool fabrication processes, and knowledge of manufacturing systems integration. If you are someone who thrives in a fast-paced environment, enjoys solving complex tooling challenges, and is passionate about supporting cutting-edge defense technology manufacturing with creative tooling solutions then this role is for you.

This role will be based temporarily at Santa Ana, CA for a 3 month training period before transitioning to Asheville, OH.

WHAT YOU’LL DO

• Build things that build things
• Design and develop custom tooling, fixtures, and jigs to support manufacturing operations across multiple product lines
• Design integrated end of arm tooling for manufacturing operations that demand high quality and repeatability
• Create detailed technical drawings, 3D models, and specifications for tool fabrication using advanced CAD software
• Troubleshoot and resolve tooling-related issues in production environments to minimize downtime
• Collaborate with cross-functional teams including design engineers, manufacturing engineers, and production staff to integrate tooling solutions with manufacturing systems
• Conduct failure analysis on tooling and implement design improvements to enhance performance and durability. Develop and release PM procedures.
• Manage tooling budgets, vendor relationships, and outside fabrication of specialized tooling
• Support continuous improvement initiatives aimed at reducing costs and improving manufacturing throughput
• Ensure all tooling designs comply with safety standards and regulatory requirements

REQUIRED QUALIFICATIONS 

• Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or related technical field
• 5+ years of experience in manufacturing tooling design and implementation
• Expert capability with (at least one) 3D CAD software (NX, SolidWorks, Inventor, or CATIA)
• Demonstrated experience with tooling design for precision manufacturing processes
• Knowledge of machining processes, materials properties, and manufacturing methods
• Expert in GD&T (Geometric Dimensioning and Tolerancing)
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS 

• Experience in defense, aerospace, or other high-reliability manufacturing environments
• Knowledge of automation systems and integration with tooling solutions
• Experience with tool lifecycle management and maintenance planning
• Familiarity with lean manufacturing principles and Six Sigma methodologies
• Background in rapid prototyping and iterative design
• Currently possesses and is able to maintain an active U.S. Secret security clearance

ABOUT THE TEAM

Intelligence Systems is focused on positioning Anduril as a lead provider of specialized engineering and products for Intelligence Community (IC) customers. We work within the IC to understand their requirements, shape their concepts of operation, and deliver exquisite capability across their problem set. We aim to develop and deploy critically needed capabilities that address our customers’ most pressing national security requirements. As the Manager of Manufacturing Test Engineering, your role encompasses the strategic oversight and tactical management of production systems to support high-volume products across the portfolio. You are charged with ensuring rigorous testing protocols are in place, resulting in the consistent delivery of superior quality products to our customers. Furthermore, your leadership guarantees the fulfillment of manufacturing's test throughput requirements. This position demands an innovative approach to resolving complex testing challenges, advancing scalability, and enhancing our automation, throughput, user interfaces, and data analytics methodologies.

ABOUT THE JOB

As an Electrical Engineer in the Manufacturing organization you will design and build complex systems and PCBA platforms to test our products. Data acquisition and physical layer interfaces using FPGA, MCU, and off-the-shelf equipment will enable testing our systems to stringent standards ensuring that we are consistently shipping the highest quality products to our customers. You will work in a multi-disciplinary design team, managing requirements, capturing custom circuits, and designing complex assemblies and harnesses. You will work with firmware engineers to enable board support packages for embedded Linux, and bring up MCU RTOS platforms. In this role you’ll need to think creatively and come up with solutions to solve difficult testing problems and push to continuously improve our methods of automation, throughput, user interfaces, and data analytics.

WHAT YOU’LL DO

• Build things that test things. Design Circuits and Schematics that will be built into test automation platforms.
• Integrate your designs into Anduril’s PDM systems. You will follow the same process for component design and release that our product design teams use.
• Design and source PCB Assemblies with varying complexity - from FPGA based data acquisition boards, to MCU platform data interfaces, breakout boards, wiring harnesses, or peripheral modules.
• Architect and source circuit board test fixtures, integrating your designs with internally developed and off-the-shelf data acquisition equipment.
• Build internal library for test circuit for data acquisition, leverage your expertise for DFM / DFT.
• Bring up, Debug, and Characterize circuits, low speed interfaces (I2C, SPI, CAN, etc.) and high speed signals (RF, memory, USB).

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Electrical/Electronics, Computer Engineering, or related fields.
• 5+ years of relevant industry experience with emphasis on product designs that have gone to manufacturing.
• Experience with Professional Electronics Design packages (Altium, Cadence, PADs, etc.) for schematic capture and layout.
• Expertise in PCBA Design. Ability to design and fabricate your own designs, or guide contract manufacturing resources.
• Familiarity with electronics test equipment such as power supplies, electronic loads, oscilloscope, function generators, spectrum analyzers, data acquisition and measurement sensors.
• Familiar with Product Life Cycle (PLM) systems and releasing designs for production.
• Currently possesses and is able to maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• 8+ years of relevant industry experience.
• Experience with scripting tools Python for configuration and automation of setup tasks.
• Familiarity with FPGA PCBA platforms - RTL, design synthesis, and bare-metal coding.
• Master’s of Science in Electrical/Electronics Engineering or related field.

ABOUT THE ROLE
The Chief Engineer of Fury System Architecture & Design is for Fury. You will conceive, define, and optimize the system's architecture, core functionalities, and performance from concept ideation through detailed design definition and validation. This role drives the technical roadmap for Fury, ensuring it embodies cutting-edge autonomy, aerospace engineering, and robust mission capability. Your focus is the intrinsic design, performance, and functionality of the system, collaborating to ensure manufacturability without directly managing production.

WHAT YOU’LL DO

• Define the end-to-end technical vision, system architecture, and strategic design roadmap for Fury UAS, translating mission requirements into innovative engineering solutions.
• Lead the conceptualization, detailed design, multi-domain analysis (aerodynamics, structures, thermal, EMI/EMC), and rigorous optimization of all Fury subsystems (airframe, propulsion, avionics, flight controls, sensors, autonomy hardware) for unparalleled performance, reliability, and survivability.
• Lead and mentor multi-disciplinary design engineering teams (aerospace, mechanical, electrical, software, GNC, autonomy hardware) through the full product design lifecycle.
• Drive critical design decisions, trade studies, and technical risk assessments that define Fury's capabilities.
• Collaborate intimately with Systems Engineering, Software, Autonomy, and GNC teams for seamless integration and optimal overall system performance.
• Serve as the principal engineering interface to strategic technology partners for advanced component research, evaluation, and technical specification.
• Champion Design for X principles (e.g., Performance, Reliability, Test, Upgradeability) from early design stages.
• Oversee selection and mastery of advanced engineering tools (MBSE, CAD/CAE, CFD, FEA, virtual prototyping, digital twin) to accelerate design cycles and rigorously validate system performance.
• Communicate design maturity, technical risks, and strategic technology insertion plans to senior leadership.

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Aerospace, Electrical, Mechanical, Systems Engineering, or a related field.
• 10+ years progressive leadership in aerospace system architecture, deep technical design, and full lifecycle development of complex autonomous flight systems, including leading multi-disciplinary design teams through conceptualization, detailed design, and rigorous validation.
• Proven ability to define, decompose, and manage complex system requirements, architecting innovative solutions and guiding technical trade-offs.
• Strong track record delivering groundbreaking, high-performing aerospace designs, balancing ambition with rigorous analysis and integrity.
• Deep and broad understanding of aerospace system architecture, flight dynamics, propulsion, avionics, sensor integration, autonomy hardware/software, and complex flight control systems.
• Expertise in Model-Based Systems Engineering (MBSE) and proficiency with advanced analytical/simulation tools (CFD, FEA, MATLAB/Simulink) for design optimization and performance prediction.
• Excellent problem-solving skills with a data-driven, first-principles-based, and results-oriented mindset.
• Effective communicator capable of driving alignment across highly technical, multi-disciplinary engineering teams and influencing senior technical and business stakeholders.
• Ability to obtain and maintain a U.S. security clearance.

PREFERRED QUALIFICATIONS

• Post-graduate degree (Master's or Ph.D.) in a relevant engineering discipline.
• Experience architecting entirely new aerospace platforms or revolutionary system concepts from a blank slate.
• Direct experience integrating AI/ML-driven decision-making, perception, and advanced autonomy into core flight system designs.
• Expertise in advanced materials science and structural design for extreme aerospace environments.
• Experience in a high-growth startup or advanced R&D defense environment, emphasizing agile design iteration and rapid proof-of-concept validation.
• Professional certifications such as CSEP, INCOSE ESEP.
• Track record managing design engineering across multiple concurrent, complex aerospace programs.
• Familiarity with digital twin technologies for design validation, virtual commissioning, and predictive performance analytics during the design phase.
• Prior experience leading 'design-to-cost' and 'design-to-performance' initiatives from concept through verification.

Build the Path Forward

 At Path Robotics, we’re building the future of embodied intelligence. Our AI-driven systems enable robots to adapt, learn, and perform in the real world closing the skilled labor gap and transforming industries. We go beyond traditional methods, combining perception, reasoning, and control to deliver field-ready AI that is risk-aware, reliable, and continuously improving through real-world use.

Big, hard problems are our everyday work, and our team of intelligent, humble, and driven people make the impossible possible together.

As a Senior Hardware Technician, you own the geometric truth of every cell that leaves our floor. After Controls Bring-Up is complete, you set up a FARO Vantage laser tracker, level the rail, align positioners, and run the RoboDK robot calibration that tells the welder where it actually is within fractions of a millimeter. You'll capture the data, validate it against our tolerances, package it per the cell type, and hand it off to our Logical Bring-Up team. Without your work, the welder is guessing.
This is a precision role for someone who is at home with a laser tracker, comfortable around large industrial robots in teach mode, and gets satisfaction from clean data.

What You’ll Do

• Set up and operate a FARO Vantage laser tracker: tripod, extension, level, warm-up, and stable lock on SMRs.
• Survey and shim the robot transfer unit (RTU) rail to level within tolerance; re-survey for confirmation.
• Align positioner headstocks and tailstocks (single-side, dual-side, dynamic, static, indexable variants) and capture before/after data.
• Establish robot base coordinate systems in Polyworks Inspector via macro — verify Z-up, X-down-track.
• Run RoboDK robot calibration on welder and (where applicable) global scanner robots — base setup, geometric calibration measurement set, and validation poses.
• Capture RTU and positioner / rail-axis data using our Polyworks macros.
• Generate, clean, and export Polyworks coordinate-system and reference-point reports at six-digit decimal precision; export tables to CSV.
• Run our Python script in RoboDK to compute robot calibration error; verify against RoboDK-reported norms and flag any deviation.
• Assemble the per-cell data package (CSV, TXT, PDF) per our File Naming Convention table for the cell variant; upload to the cell's calibration-results folder.
• Walk the bring-up engineer through the data package; obtain written acceptance; tear down and pack out.
• Identify recurring fixturing, build, or alignment issues that show up on the tracker, and feed them back to design and build through our ECR process.
• Help us automate. Half of this job is repetitive (rename a file, change decimal precision, upload). If you can write Python or shell to kill those steps, we want it.
• Maintain our tracker's calibration certificate, SMRs, cabling, and bring-up laptop image; flag re-cal needs proactively.
• Mentor junior techs — we're growing the team, and being a force-multiplier matters here.

Who You Are

• 3+ years hands-on experience with a FARO laser tracker (Vantage / Ion / equivalent) in a manufacturing or contract-metrology environment.
• Working proficiency with Polyworks Inspector — running and modifying macros, generating and editing inspection reports.
• Practical understanding of dimensional metrology fundamentals: GD&T, coordinate systems, alignment, datum structures, measurement uncertainty.
• Comfort working alongside an industrial six-axis robot in teach mode — including basic teach-pendant navigation.
• Disciplined documentation and file-management practices; you understand why naming conventions matter.
• Comfortable working in PPE in an active manufacturing environment.

Preferred but not required:

• RoboDK robot calibration — geometric DH calibration and validation workflows.
• Yaskawa (or other industrial robot) teach-pendant familiarity.
• Python scripting — even basic file-rename / upload automation is a big plus.
• 3D CAD (SolidWorks) and converting CAD models into RoboDK stations.
• Experience with multiple tracker platforms (Leica, Hexagon) or photogrammetry systems.
• Manufacturer training certificates from FARO, InnovMetric, or RoboDK.
• Experience writing or editing Confluence procedure pages, work instructions, or training materials.

Why You’ll Love Working Here

• Daily free lunch to keep you fueled and connected with the team
• Flexible PTO so you can take the time you need, when you need it
• Comprehensive medical, dental, and vision coverage
• 6 weeks fully paid parental leave, plus an additional 6–8 weeks for birthing parents (12–14 weeks total)
• 401(k) retirement plan through Empower
• Generous employee referral bonuses—help us grow our team!

Who We Are

At Path Robotics we love coming to work to solve interesting and tough challenges but also because our ideas are welcomed and valued. We encourage unique thinking and are dedicated to creating a diverse and inclusive environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

If you require a reasonable accommodation to participate in the application process or any part of the hiring process, please contact HR@path-robotics.com. We are committed to providing equal access and will work with qualified individuals to ensure a fair and accessible hiring experience. We will respond to your request within 48 hours.

Build the Path Forward

At Path Robotics, we’re building the future of embodied intelligence. Our AI-driven systems enable robots to adapt, learn, and perform in the real world closing the skilled labor gap and transforming industries. We go beyond traditional methods, combining perception, reasoning, and control to deliver field-ready AI that is risk-aware, reliable, and continuously improving through real-world use.

Big, hard problems are our everyday work, and our team of intelligent, humble, and driven people make the impossible possible together.

We are looking for a Welding Engineer who will work side-by-side with a team of welding engineers to develop an autonomous robotic welding system capable of automatically generating custom motion plans and weld parameters for any part that it sees. You will also support teams with welding experiments, generating the data that propels our technology forward. You will join a team of dedicated, supportive, and enthusiastic people to help create the future of manufacturing.

What You’ll Do 

• Run weld parameter selection experiments to identify a range of welding parameters (voltage, wire speed, travel speed) that can be used for new customer applications
• Partner with robotics engineers to develop a set of rules for how to move the workpiece and robot end-effector to automate trajectory generation
• Perform robotic welding experiments to test other systems in development including sensors and inspection systems, path planning and welding strategies, and new hardware
• Work with our hardware team to fabricate test coupons for application feasibility testing and other in-house experiments
• 30%-50% travel required, in which you will be interfacing and working directly with customers.
• Operate a state-of the art AI-powered robotic welding cell
• Manually weld coupons and other test parts when needed
• Use powered shop tools to cut and etch weld samples

Who You Are

• 3+ years of experience developing robotic welding procedures in an industrial environment
• Proficient in industrial robotics including Yaskawa, ABB, Kuka, or Fanuc platforms
• Background in fusion-based weld parameter development for carbon steel, stainless steel, and aluminum.
• Proficient with manual welding processes including GMAW, FCAW, GTAW, and SMAW
• Understand weld symbology and print interpretation
• Experience with Design of Experiment (DoE) principles
• Passionate about what you do and enjoy working in a collaborative environment

Why You’ll Love Working Here

• Daily free lunch to keep you fueled and connected with the team
• Flexible PTO so you can take the time you need, when you need it
• Comprehensive medical, dental, and vision coverage
• 6 weeks fully paid parental leave, plus an additional 6–8 weeks for birthing parents (12–14 weeks total)
• 401(k) retirement plan through Empower
• Generous employee referral bonuses—help us grow our team!

Who We Are

At Path Robotics we love coming to work to solve interesting and tough challenges but also because our ideas are welcomed and valued. We encourage unique thinking and are dedicated to creating a diverse and inclusive environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

If you require a reasonable accommodation to participate in the application process or any part of the hiring process, please contact HR@path-robotics.com. We are committed to providing equal access and will work with qualified individuals to ensure a fair and accessible hiring experience. We will respond to your request within 48 hours.

Build the Path Forward

At Path Robotics, we’re building the future of embodied intelligence. Our AI-driven systems enable robots to adapt, learn, and perform in the real world closing the skilled labor gap and transforming industries. We go beyond traditional methods, combining perception, reasoning, and control to deliver field-ready AI that is risk-aware, reliable, and continuously improving through real-world use.

Big, hard problems are our everyday work, and our team of intelligent, humble, and driven people make the impossible possible together.

We need a Technical Marketing Engineer. Someone who's spent real time in manufacturing and can turn that knowledge into content that technical buyers actually trust.

This isn't a traditional marketing role. You'll sit on the marketing team but spend your time with engineering, applications, sales, and customer success. Your job is to make sure everything we put out speaks the language of the shop floor, not Silicon Valley.

If a welding engineer reads our white paper, they should think "these people know what they're talking about." That's the bar.

What You’ll Do

• Write white papers, case studies, application guides, product one-pagers, and blog posts grounded in actual manufacturing and welding knowledge
• Build and maintain ROI calculators, business case tools, and other quantitative sales enablement materials
• Translate AI and robotics capabilities into clear, credible messaging for manufacturing audiences. No buzzword stacking.
• Support product launches with technically accurate positioning, competitive analysis, and go-to-market materials
• Create demo scripts, talking points, and presentation content for trade shows (FABTECH, AWS, industry events)
• Work with the applications engineering team to capture customer stories, weld data, and production metrics
• Be the last check on all outbound technical marketing. If it would lose credibility with a fabrication manager, it doesn't go out.
• Contribute to website content, video scripts, and social posts that need technical depth
• Help sharpen competitive positioning against traditional automation and other robotics companies

Who You Are

• Bachelor's degree in Mechanical Engineering, Welding Engineering, Manufacturing Engineering, or a closely related field
• 3+ years in engineering, manufacturing, welding, or fabrication environments. You've been on shop floors and understand the realities of production.
• Strong technical writing. You can explain complex concepts clearly without dumbing them down.
• Familiarity with welding
• Comfortable working across engineering, sales, and leadership teams

Desired but not required:

• AWS CWI or CWE certification
• Experience with robotic welding or automation systems
• Background in applications engineering, technical sales, or product marketing at a manufacturing technology company
• Experience building ROI models or business case analyses
• Familiarity with heavy fabrication, shipbuilding, structural steel, or defense manufacturing
• Working understanding of AI/ML concepts (you don't need to write code, but you should be able to explain what a model does and why it matters)

Why You’ll Love Working Here

• Daily free lunch to keep you fueled and connected with the team
• Flexible PTO so you can take the time you need, when you need it
• Comprehensive medical, dental, and vision coverage
• 6 weeks fully paid parental leave, plus an additional 6–8 weeks for birthing parents (12–14 weeks total)
• 401(k) retirement plan through Empower
• Generous employee referral bonuses—help us grow our team!

Who We Are

At Path Robotics, we love coming to work to solve interesting and tough challenges but also because our ideas are welcomed and valued. We encourage unique thinking and are dedicated to creating a diverse and inclusive environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

If you require a reasonable accommodation to participate in the application process or any part of the hiring process, please contact HR@path-robotics.com. We are committed to providing equal access and will work with qualified individuals to ensure a fair and accessible hiring experience. We will respond to your request within 48 hours.

Build the Path Forward

Path Robotics is redefining what's possible in autonomous welding. Our AI-powered robotic welding systems use advanced sensing and computer vision to adapt in real time. We're building the future of manufacturing, and we're looking for engineers who want to get their hands dirty doing it.

We're looking for a Mechanical Engineer with a passion for building hardware that works in the real world. You'll be embedded in our sensing and mobile welding platform team, designing the mechanical systems that put our robots in motion and keep them welding accurately in dynamic, unstructured environments. This is a hands-on role for someone who thrives on rapid iteration, owns their designs end to end, and cares deeply about how something gets made — not just how it looks in CAD.

What You'll Do

• Design and develop mechanical assemblies for mobile robotic welding platforms, including sensor integration, structural components and systems, motion systems, and tooling interfaces
• Own designs from concept through fabrication, assembly, and field validation — iterating based on test results and real-world feedback
• Collaborate closely within a cross-functional team including mechanical, electrical, software, and systems engineers to integrate sensing hardware (cameras, LiDAR, proximity sensors, etc.) into compact, robust mechanical packages
• Apply sound design-for-manufacturing (DFM) principles across multiple fabrication methods — machined components, sheet metal enclosures, and additive/3D-printed parts
• Create and maintain detailed CAD models, assemblies, drawings, and BOMs in SolidWorks, managed through PDM
• Participate in design reviews and contribute to engineering decisions with well-reasoned tradeoffs between performance, cost, and manufacturability
• Work directly with fabrication vendors and internal shop resources to turn drawings into parts — fast
• Support root cause analysis and design improvements driven by field findings and reliability data

What We're Looking For

• 3–6 years of mechanical engineering experience in a product development or hardware engineering environment
• Proficiency in SolidWorks for multi-body and multi-component assemblies, with hands-on use of PDM for version control and release workflows
• Solid command of engineering drawing standards and the ability to produce clear, manufacturable drawings; working familiarity with GD&T
• Demonstrated experience designing for multiple manufacturing methods — machining, sheet metal, and additive manufacturing
• Ability to read and reason about mechanical interfaces in the context of broader electromechanical systems

Why You’ll Love Working Here

• Competitive salary and equity in a well-funded, high-growth robotics company
• Comprehensive health, dental, and vision benefits
• 401(k)
• Flexible PTO
• Hands-on, collaborative culture

Who We Are

Build the Path Forward

At Path Robotics, we’re building the future of embodied intelligence. Our AI-driven systems enable robots to adapt, learn, and perform in the real world, closing the skilled labor gap and transforming industries. We go beyond traditional methods, combining perception, reasoning, and control to deliver field-ready AI that is risk-aware, reliable, and continuously improving through real-world use.

Big, hard problems are our everyday work, and our team of intelligent, humble, and driven people make the impossible possible together.

Our Mechanical Engineers work on some of the most important things we need to change the future of manufacturing - electromechanical components and automation systems that enable safe part holding and quality welds. Our flexible backend system integrates robots, sensors, and other systems present in manufacturing and combines them with our cutting-edge algorithms. You will report to our Hardware Engineering Manager and will join a team of dedicated, supportive, and enthusiastic people to help create the future of manufacturing. 

What You’ll Do

• Design welding fixtures, tooling, and robotic cell layouts for automated robotic welding systems.
• Create build-to-print part and assembly drawings, mechanical BOMs, and layouts in SolidWorks, applying GD&T as needed.
• Perform structural validation using SolidWorks Simulation (FEA) to support design decisions.
• Design and integrate pneumatic and low-voltage electrical subsystems within mechanical assemblies.
• Build and validate designs at our manufacturing facility by hands-on prototyping. 
• Assist in manufacturing through machine shop work and assembly as needed
• Support builds, kitting, and installations, resolving mechanical issues as systems are deployed.
• Implement engineering change requests (ECRs) driven by build and field feedback.
• Partner with manufacturing and supply chain to reduce BOM cost, improve availability, and standardize parts.
• Capture lessons learned and roll improvements into standards, libraries, and future designs.

Who You Are

• Bachelors degree in mechanical or aerospace engineering, or equivalent
• 2–6+ years of experience in mechanical design for automation or robotic systems, ideally in robotic welding environments.
• Experienced with fixture design, robotic cell layouts, and production automation hardware.
• Strong user of SolidWorks, including FEA, with the ability to interpret and apply results pragmatically.
• Comfortable producing manufacturing-ready engineering drawings
• Familiar with pneumatic systems, electrical interfaces, and mechanical integration points.
• Knowledgeable in machine safety as it applies to mechanical design, risk reduction, and designing for safe operation and maintenance.
• Experienced in working with PDM/PLM systems and supporting designs through change.
• Hands-on and curious about how designs translate to the shop floor.
• Thinks in terms of repeatability, deployment efficiency, and operational scale.
• Seeks feedback from internal and external customers, and uses it to drive continuous improvement.
• Communicates clearly, works well across disciplines, and values shared ownership.
• Motivated by making each deployment easier, faster, and more reliable than the last.

Why You’ll Love Working Here

• Daily free lunch to keep you fueled and connected with the team
• Flexible PTO so you can take the time you need, when you need it
• Comprehensive medical, dental, and vision coverage
• 6 weeks fully paid parental leave, plus an additional 6–8 weeks for birthing parents (12–14 weeks total)
• 401(k) retirement plan through Empower
• Generous employee referral bonuses—help us grow our team!

Who We Are

At Path Robotics we love coming to work to solve interesting and tough challenges but also because our ideas are welcomed and valued. We encourage unique thinking and are dedicated to creating a diverse and inclusive environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

If you require a reasonable accommodation to participate in the application process or any part of the hiring process, please contact HR@path-robotics.com. We are committed to providing equal access and will work with qualified individuals to ensure a fair and accessible hiring experience. We will respond to your request within 48 hours.

Build the Path Forward

At Path Robotics, we’re building the future of embodied intelligence. Our AI-driven systems enable robots to adapt, learn, and perform in the real world closing the skilled labor gap and transforming industries. We go beyond traditional methods, combining perception, reasoning, and control to deliver field-ready AI that is risk-aware, reliable, and continuously improving through real-world use.

Big, hard problems are our everyday work, and our team of intelligent, humble, and driven people make the impossible possible together.

We are seeking a skilled and motivated Machine Learning Engineer with expertise in modern robotics and manipulation to join our Robot Learning team to build agentic AI systems for industrial applications. The ideal candidate will have experience in robotics, with a focus on developing and implementing advanced manipulation techniques, motion control systems, and planning algorithms for autonomous robots. This role involves working closely with cross-functional teams to design, test, and deploy innovative solutions that improve the performance and capabilities of our robotic systems.

What You’ll Do

• Work on the development and deployment of behavioral cloning (BC), reinforcement learning (RL), and diffusion models to solve complex robotic tasks.
• Leverage multi-modal data, including image-based data, force, and torque to enhance robotic manipulation and control.
• Design and implement vision-language-action (VLA) models for more intelligent and responsive robotic systems.
• Craft strategies for the entire solution's lifecycle, including data collection, fleet learning, and continuous learning.
• Develop, optimize, and deploy learning-based methods for robot control and object manipulation algorithms on a fleet of industrial robotic cells.
• Collaborate with hardware and software teams to integrate manipulation, control, and planning algorithms into robotic platforms.
• Stay updated with the latest advancements in robotics, control theory, and planning algorithms.

Who You Are

• Ph.D. or Master’s degree in Robotics, Mechanical Engineering, Electrical Engineering, Computer Science, or a related field.
• Proven track record in publishing at top conferences (e.g., NeurIPS, ICLR, ICML, CoRL, RLC).
• Experience with robotic simulation tools (e.g., Isaac Sim, MuJoCo).
• Experience with machine learning techniques applied to robot manipulation.
• Experience building models from scratch and deploying them in real-world applications.
• Experience with pose estimation, segmentation, active perception, and affordance-based bin picking.
• Strong programming skills in languages such as C++ or Python.
• Experience with robotic simulation tools (e.g., Isaac Sim, MuJoCo).
• Proven track record of deploying scalable solutions for autonomous robotic systems.
• Strong communication skills, with the ability to convey complex technical concepts to a diverse audience.

Why You'll Love It Here

• Daily free lunch to keep you fueled and connected with the team
• Flexible PTO so you can take the time you need, when you need it
• Comprehensive medical, dental, and vision coverage
• 6 weeks fully paid parental leave, plus an additional 6–8 weeks for birthing parents (12–14 weeks total)
• 401(k) retirement plan through Empower
• Generous employee referral bonuses—help us grow our team!

Who We Are

At Path Robotics we love coming to work to solve interesting and tough challenges but also because our ideas are welcomed and valued. We encourage unique thinking and are dedicated to creating a diverse and inclusive environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

If you require a reasonable accommodation to participate in the application process or any part of the hiring process, please contact HR@path-robotics.com. We are committed to providing equal access and will work with qualified individuals to ensure a fair and accessible hiring experience. We will respond to your request within 48 hours.

Build the Path Forward

At Path Robotics, we’re building the future of embodied intelligence. Our AI-driven systems enable robots to adapt, learn, and perform in the real world closing the skilled labor gap and transforming industries. We go beyond traditional methods, combining perception, reasoning, and control to deliver field-ready AI that is risk-aware, reliable, and continuously improving through real-world use.

Big, hard problems are our everyday work, and our team of intelligent, humble, and driven people make the impossible possible together.

We're seeking passionate ML Engineers to join our team at the intersection of welding science and artificial intelligence. We currently have experienced (L3/L4), senior (L5) and staff (L6) level openings within and you'll be instrumental in developing robotic welding solutions. You'll use your skills in computer vision, deep learning, and Python programming to tackle challenges in our field alongside our talented teams.

What You’ll Do

Experienced:

• Implement, validate, and iterate on machine learning algorithms for weld perception tasks, including point cloud registration, seam detection, and joint geometry estimation, progressively expanding coverage across joint types and part geometries.
• Build and maintain data pipelines for training and evaluating perception models, spanning annotated 3D scan data ingestion, synthetic data generation, and structured dataset management for iterative model improvement.
• Run rigorous model evaluation experiments, including failure mode analysis, FP/FN rate characterization, and benchmarking against quantitative registration accuracy thresholds, and communicate findings clearly to guide next steps.
• Integrate trained models into production ROS-based robotics services, ensuring low-latency inference and compatibility with deployed cell configurations.
• Write clean, well-tested Python code; participate actively in code and experiment reviews; and maintain clear documentation of methods, parameters, and results.

Senior/Staff:

• Lead research, development, and production deployment of advanced perception algorithms spanning point cloud registration, seam detection, and real-time in-process tracking across structured light, RGB, and stereo sensors.
• Design and lead experiments evaluating state-of-the-art deep learning models, including transformer-based and geometric feature learning architectures
• Design and lead real-time perception systems such as during-weld seam tracking, applying sensor fusion with probabilistic state estimation (e.g., Kalman filtering) to achieve robust weld performance.
• Define and own the end-to-end ML lifecycle, from dataset design and annotation strategy through training, benchmarking, and fleet deployment, with clear go/no-go evaluation frameworks.
• Architect distributed training and hyperparameter optimization workflows; drive strategy for data acquisition, annotation tooling, and synthetic vs. real scan data usage.
• Mentor engineers across levels, providing technical leadership on perception systems and ML methodology.

Who You Are

• Master's or Ph.D. in CS, Robotics, or related field (Computer Vision, ML, or Perception); Bachelor's with strong production ML experience also considered. 
• 3+ years (Experienced) / 7+ years (Senior/Staff) in real-world robotics or industrial ML.
• Strong Python fluency and hands-on PyTorch experience, including training, evaluating, and deploying deep learning models in production.
• Experience with 3D point cloud data and libraries such as Open3D, including geometric concepts like surface segmentation, spatial queries, and point-wise labeling.
• Familiarity with 3D deep learning architectures such as PointNet++, GeoTransformer, or similar transformer-based or graph-based approaches on geometric data.
• Comfortable integrating ML models into production robotics services within ROS-based architectures and containerized deployment environments.
• Senior/Staff: Demonstrated track record leading end-to-end ML projects from dataset design through fleet deployment with rigorous go/no-go frameworks; experience architecting distributed training and hyperparameter optimization workflows

Why You’ll Love Working Here

• Daily free lunch to keep you fueled and connected with the team
• Flexible PTO so you can take the time you need, when you need it
• Comprehensive medical, dental, and vision coverage
• 6 weeks fully paid parental leave, plus an additional 6–8 weeks for birthing parents (12–14 weeks total)
• 401(k) retirement plan through Empower
• Generous employee referral bonuses—help us grow our team!

Who We Are

Build the Path Forward

At Path Robotics, we’re building the future of embodied intelligence. Our AI-driven systems enable robots to adapt, learn, and perform in the real world, closing the skilled labor gap and transforming industries. We go beyond traditional methods, combining perception, reasoning, and control to deliver field-ready AI that is risk-aware, reliable, and continuously improving through real-world use.

Big, complex problems are our everyday work, and our team of intelligent, humble, and driven people makes the impossible possible together.

We’re looking for an Electrical Engineer to design, build, and refine the electrical foundation behind our automation platform. You’ll own critical electrical systems from concept through deployment, ensuring performance, safety, reliability, and scalability across advanced automated equipment and robotic welding cells. This role offers hands-on ownership, technical depth, and the opportunity to directly influence how modern automation products are designed, built, and deployed.

What You’ll Do

• Design and implement scalable electrical systems for advanced automated equipment and robotic welding cells using SOLIDWORKS Electrical.
• Develop and maintain complete electrical documentation packages, including schematics, panel layouts, I/O lists, cable schedules, power distribution diagrams, and BOMs.
• Architect power distribution systems, grounding strategies, and protection schemes to ensure safety, robustness, and compliance.
• Specify and validate electrical components including PLCs, power supplies, breakers, contactors, safety devices, VFDs, servos, and motion systems.
• Develop, test, and debug PLC software across multiple platforms (e.g., Allen-Bradley / Studio 5000 and Delta PLCs / CODESYS) where applicable.
• Integrate third-party electrical subsystems and ensure seamless system-level performance.
• Lead machine safety design efforts, contribute to risk assessments, and support compliance with relevant electrical and industrial safety standards.
• Partner with supply chain and manufacturing to optimize BOM cost, part standardization, availability, and build efficiency.
• Support systems through build, FAT, installation, and commissioning, troubleshooting electrical issues and improving future deployments.
• Drive continuous improvement by feeding field learnings back into design standards, documentation, and component selection.
• Collaborate cross-functionally with mechanical, controls, robotics, and product teams to deliver cohesive system designs.

Who You Are

• 2–6+ years of experience designing and deploying industrial electrical systems for automated equipment or machinery.
• Strong experience creating electrical schematics and panel designs using SOLIDWORKS Electrical (or similar ECAD tools).
• Solid understanding of power distribution, circuit protection, grounding, and industrial wiring standards.
• Experience working with PLC hardware and industrial controls components (e.g., Allen-Bradley, Delta, or similar platforms).
• Familiarity with machine safety systems, including safety PLCs, safety I/O, and risk assessment processes.
• Experience with robotic automation systems is a plus, ideally robotic welding applications (Yaskawa robots, Miller welding equipment, or similar).
• Thinks in terms of scalable, standardized designs that improve reliability, safety, and deployment efficiency.
• Comfortable testing, validating, and iterating on electrical designs using real-world feedback.
• Understands the cost, availability, and lifecycle implications of component selection and works effectively with supply chain partners.
• Communicates clearly, collaborates well across disciplines, and takes ownership of outcomes from concept through field deployment.
• Curious and motivated to continuously improve system performance, safety, cost, and manufacturability

Why You’ll Love Working Here

• Daily free lunch to keep you fueled and connected with the team
• Flexible PTO so you can take the time you need, when you need it
• Comprehensive medical, dental, and vision coverage
• 6 weeks fully paid parental leave, plus an additional 6–8 weeks for birthing parents (12–14 weeks total)
• 401(k) retirement plan through Empower
• Generous employee referral bonuses—help us grow our team!

Who We Are

At Path Robotics, we love coming to work to solve interesting and tough challenges, but also because our ideas are welcomed and valued. We encourage unique thinking and are dedicated to creating a diverse and inclusive environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

If you require a reasonable accommodation to participate in the application process or any part of the hiring process, please contact HR@path-robotics.com. We are committed to providing equal access and will work with qualified individuals to ensure a fair and accessible hiring experience. We will respond to your request within 48 hours.

Build the Path Forward

At Path Robotics, we’re building the future of embodied intelligence. Our AI-driven systems enable robots to adapt, learn, and perform in the real world closing the skilled labor gap and transforming industries. We go beyond traditional methods, combining perception, reasoning, and control to deliver field-ready AI that is risk-aware, reliable, and continuously improving through real-world use.

Big, hard problems are our everyday work, and our team of intelligent, humble, and driven people make the impossible possible together.

Our Deployment Engineers work to seamlessly integrate our robots, sensors, and software into a cutting-edge autonomous welding system. They're the link between engineering and operations manufacturing groups as we prepare our robotic weld cells for deployment. You will report to our Senior Manager of Deployment Engineering and will join a team of dedicated, supportive, and enthusiastic people to help create the future of manufacturing. 

What You’ll Do

• Configure and calibrate cell components to confirm our robotic welding cells are fully operational at Path’s manufacturing facility and the customer site
• Identify software issues and implement fixes
• Document system errors and submit Jira tickets for issues that require engineering team support
• Work with the engineering team to continually improve speed and stability of the software releases
• Update documentation of cell operation and bring-up task processes as needed
• Train Operating Technicians on new operation processes as needed

Who You Are

• Bachelor's degree in Computer Science, Electrical Engineering, or equivalent
• Experience in C++, Python, Bash, ROS, and Git version control
• Familiarity and experience with implementing and troubleshooting robotics and control systems
• Experience with the Linux environment and the command line interface  
• A track record of strong documentation skills and a passion to leave things better than you found them
• Able to travel up to 30-50% during peak installation periods at customer sites throughout North America (ability to acquire a passport is required)

Why You’ll Love Working Here

• Daily free lunch to keep you fueled and connected with the team
• Flexible PTO so you can take the time you need, when you need it
• Comprehensive medical, dental, and vision coverage
• 6 weeks fully paid parental leave, plus an additional 6–8 weeks for birthing parents (12–14 weeks total)
• 401(k) retirement plan through Empower
• Generous employee referral bonuses—help us grow our team!

Who We Are

At Path Robotics we love coming to work to solve interesting and tough challenges but also because our ideas are welcomed and valued. We encourage unique thinking and are dedicated to creating a diverse and inclusive environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

If you require a reasonable accommodation to participate in the application process or any part of the hiring process, please contact HR@path-robotics.com. We are committed to providing equal access and will work with qualified individuals to ensure a fair and accessible hiring experience. We will respond to your request within 48 hours.

Build the Path Forward

At Path Robotics, we’re building the future of embodied intelligence. Our AI-driven systems enable robots to adapt, learn, and perform in the real world closing the skilled labor gap and transforming industries. We go beyond traditional methods, combining perception, reasoning, and control to deliver field-ready AI that is risk-aware, reliable, and continuously improving through real-world use.

Big, hard problems are our everyday work, and our team of intelligent, humble, and driven people make the impossible possible together.

We are standing up a new Robot Learning team focused on whole-body loco-manipulation for precision tasks in heavy manufacturing. 

We are seeking a Machine Learning Engineer to join us as a founding member. You will be among the first ML engineers on a research stack that does not exist anywhere else in the field built around visual reasoning, learned action policies, and reinforcement-learning fine-tuning from real customer data.

What You’ll Do

• Build the team's robot-learning stack from the ground up. This is a founding role; you are designing the training infrastructure, data pipelines, simulation environments, model architectures, and deployment workflows — not inheriting them. Multi-modal perception, scene understanding, and learned action generation work in tight coordination on the stack you help create.
• Stand up ML infrastructure — training pipelines, experiment tracking, data versioning, reproducible sim-to-real workflows.
• Train policies across manipulation, locomotion, and the whole-body control coupling between them. On legged platforms performing precision tasks, manipulation and locomotion are not separable — every arm motion shifts the centre of mass; the whole-body controller compensates in real time to maintain accuracy at the tool. Behavioural cloning, diffusion- and flow-matching action generation, reinforcement-learning fine-tuning. Cobots, industrial arms, and mobile platforms.
• Deploy in stages — through a phased rollout strategy that builds production trust over time. Every real-world execution accumulates training data for continuous improvement.
• Collaborate daily with mechanical engineers, perception engineers, robotics engineers, and manufacturing domain experts. Within-department rotation across home teams is expected.

Who You Are

• Ph.D. or Master's degree in Robotics, Mechanical Engineering, Electrical Engineering, Computer Science, or a related field — or equivalent experience.
• 2+ years of hands-on robot learning experience. You have trained policies and deployed them on real robot hardware — not just in simulation.
• Sim-to-real transfer experience — built simulation environments, implemented domain randomisation, transferred policies to physical robots, debugged where it broke.
• Implementation experience with diffusion-based or flow-matching action policies for robots, and with action chunking.
• Reinforcement learning for robotics applied on real hardware — sample-efficient on-robot methods, residual RL on top of pretrained policies, on-policy fine-tuning of foundation policies.
• Strong programming skills in Python; PyTorch and ML training infrastructure at production level.
• Practical experience with NVIDIA Isaac Sim / Isaac Lab, MuJoCo, or equivalent.
• Comfort with physical robots — debugging, iterating, deploying.
• Strong communication skills, able to convey complex technical concepts to a diverse audience.

Strongly Preferred:

• Edge inference on edge-class hardware (TensorRT, ONNX, FP16 / INT8 quantisation). Real-time on-robot deployment is a core requirement.
• Visual self-supervised representation learning experience on robot or 3D-vision tasks.
• Legged-robot or whole-body control experience — locomotion, manipulation on a floating base, or the integration between them on quadrupeds or humanoids.
• Physics-informed ML — hybrid models where learned components are constrained by known physics.
• Experience building ML pipelines or infrastructure in a team setting.

Why You’ll Love Working Here

• Daily free lunch to keep you fueled and connected with the team
• Flexible PTO so you can take the time you need, when you need it
• Comprehensive medical, dental, and vision coverage
• 6 weeks fully paid parental leave, plus an additional 6–8 weeks for birthing parents (12–14 weeks total)
• 401(k) retirement plan through Empower
• Generous employee referral bonuses—help us grow our team!

Who We Are

At Path Robotics we love coming to work to solve interesting and tough challenges but also because our ideas are welcomed and valued. We encourage unique thinking and are dedicated to creating a diverse and inclusive environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

If you require a reasonable accommodation to participate in the application process or any part of the hiring process, please contact HR@path-robotics.com. We are committed to providing equal access and will work with qualified individuals to ensure a fair and accessible hiring experience. We will respond to your request within 48 hours.

Build the Path Forward

At Path Robotics, we’re building the future of embodied intelligence. Our AI-driven systems enable robots to adapt, learn, and perform in the real world closing the skilled labor gap and transforming industries. We go beyond traditional methods, combining perception, reasoning, and control to deliver field-ready AI that is risk-aware, reliable, and continuously improving through real-world use.

Big, hard problems are our everyday work, and our team of intelligent, humble, and driven people make the impossible possible together.

You will play a mission-critical role in architecting our data platform, enabling our machine learning and robotics teams to move faster, experiment more effectively, and deploy AI solutions into production.

This is a founding-level opportunity to lay the groundwork for our entire data infrastructure and build the data team. Reporting to the Director of AI, you’ll collaborate with a talented team of machine learning engineers and software engineers to deliver clean, reliable, and scalable data pipelines that fuel experimentation, production models, and cutting-edge AI development.

What You’ll Do

• Architect and build our end-to-end data platform, including ingestion, transformation, orchestration, quality monitoring, and data access layers.
• Lead initiatives that break down data silos and enable seamless collaboration between business domains
• Design and develop optimized database architecture and data schemas with strategic partitioning for large scale multi-modal data.
• Implement scalable ETL/ELT pipelines that serve experimentation, training, validation, and real-time deployment needs across robotics and AI systems.
• Collaborate with ML and robotics engineers to define and deliver the data infrastructure required for cutting-edge model development and real-world deployment.
• Establish data governance, reproducibility, and lineage standards to ensure data integrity and traceability at scale.
• Develop data contracts and API specifications to ensure reliable data exchange between robotics systems, ML models, and downstream applications.
• Write production-grade, maintainable, and well-documented Python and SQL code for critical data workflows.
• Help shape our MLOps, observability, and CI/CD practices for continuous learning systems in physical environments.

Who You Are

• 5+ years of experience in data engineering, with a strong track record of building scalable data systems and infrastructure from the ground up.
• Previous experience supporting AI/ML teams with data platforms in fast-paced or startup environments.
• Deep proficiency in SQL, Python, and distributed data systems.
• Hands-on experience with tools like AWS, Snowflake, Dagster, dbt, or equivalent modern data stack.
• Experience with streaming technologies such as Kafka, Flink, or similar platforms for real-time data processing.
• Passionate about building clean, reliable data pipelines that power real-time ML and robotics workflows.
• Experience with data quality, observability, and production monitoring of data systems.
• Comfortable operating in ambiguity and taking ownership. You’re excited to build and own the foundation of a data-first company.
• Bonus: experience working with sensor data, robotics logs, time series, or other high-volume real-world datasets.

Why You’ll Love Working Here

• Daily free lunch to keep you fueled and connected with the team
• Flexible PTO so you can take the time you need, when you need it
• Comprehensive medical, dental, and vision coverage
• 6 weeks fully paid parental leave, plus an additional 6–8 weeks for birthing parents (12–14 weeks total)
• 401(k) retirement plan through Empower
• Generous employee referral bonuses—help us grow our team!

Who We Are

Regulatory and Compliance Requirements
This position may support work performed under U.S. Government contracts and requires compliance with applicable federal regulations, including FAR and DFARS where applicable.
The role may involve access to export-controlled information subject to ITAR and/or EAR. Candidates must be able to comply with U.S. export control regulations, which may include meeting the definition of a “U.S. Person” where required.
This position may also involve handling Controlled Unclassified Information (CUI) and requires adherence to company and federal data protection and confidentiality standards. Employment may be contingent upon successful completion of a background check consistent with applicable requirements.

About Path robotics

Path Robotics is redefining what's possible in autonomous welding. Our AI-powered robotic welding systems use advanced sensing and computer vision to adapt in real time — no fixtures, no programming, no limits. We're building the future of manufacturing, and we're looking for engineers who want to get their hands dirty doing it.

The Role

We're looking for a Software Engineer with strong systems-level instincts and experience building software that interfaces directly with hardware. You'll work across our sensing stack, robotic platform, and compute infrastructure — writing the code that lets our robots see, move, and think. This is a role for someone who's comfortable working close to the metal: writing HALs, integrating sensors and actuators, and squeezing performance out of embedded compute platforms.

What You’ll Do

• Develop full-stack software for sensing and robotic systems, including HALs for cameras, laser sensors, and communication interfaces.
  
  
• Build and extend the software architecture that integrates robotic arms, welding systems, and peripheral hardware into a unified control stack.
  
  
• Design and implement robust device drivers, HALs, and ROS-based components for production robotic applications.
  
  
• Develop and optimize software for embedded compute platforms such as NVIDIA Jetson, including real-time and GPU-accelerated workloads.
  
  
• Work closely with hardware, firmware, and systems teams to bring up devices, debug issues across the stack, support deployments, and improve field performance.

Who You Are

• 3–6 years of software engineering experience in robotics, automation, embedded systems, or a related field.
  
  
• Strong C++ skills in production environments, with working knowledge of Python for tooling, scripting, and testing.
  
  
• Hands-on experience with ROS or ROS2 in deployed systems.
  
  
• Experience building HALs, device drivers, or other low-level software for sensors, actuators, and hardware peripherals.
  
  
• Comfortable with embedded Linux, cross-compilation, and working alongside hardware and firmware engineers to debug integrated systems.

Why You’ll Love Working Here

• Competitive salary and equity in a well-funded, high-growth robotics company
• Comprehensive health, dental, and vision benefits
• 401(k)
• Flexible PTO
• Hands-on, collaborative culture

*Path Robotics is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.*

Who We Are

Build the Path Forward

At Path Robotics, we’re building the future of embodied intelligence. Our AI-driven systems enable robots to adapt, learn, and perform in the real world closing the skilled labor gap and transforming industries. We go beyond traditional methods, combining perception, reasoning, and control to deliver field-ready AI that is risk-aware, reliable, and continuously improving through real-world use.

Big, hard problems are our everyday work, and our team of intelligent, humble, and driven people make the impossible possible together.

We’re looking for a Software Engineer with deep experience in C++ and Python to lead the development of core systems powering our intelligent robotic platforms. In this role, you’ll architect and implement high-performance software at the intersection of real-time robotics, perception, and machine learning. You’ll take technical ownership of critical components, mentor team members, and help shape the future of our robotics software stack.

What You’ll Do

• Drive software architecture decisions across robotics and perception systems.
• Design, implement, and optimize performance-critical components of the robotics and perception stack in C++ and Python.
• Develop and integrate 3D point cloud processing algorithms for weld joint perception, including registration, pose estimation, segmentation, and geometric reasoning.
• Lead the integration of machine learning models into real-time systems, ensuring low-latency, high-reliability performance.
• Design and implement gRPC/Protobuf service interfaces with attention to schema versioning and backward-compatible API evolution.
• Instrument perception systems for production observability, building telemetry pipelines that connect algorithmic metrics to business outcomes.

Who You Are

• Bachelor's, Master's, or PhD in Computer Science, Robotics, Electrical Engineering, or a related field.
• 5+ years of professional experience in software engineering; title and compensation will be commensurate with experience.
• Solid grasp of system-level software design, concurrency, memory management, and optimization.
• Advanced proficiency in modern C++ and Python, with demonstrated experience building production services using gRPC and Protobuf.
• Experience with robotics or perception applications, including familiarity with ROS/ROS2, motion planning, and hardware interfaces is preferred.
• Proficient in Linux-based development; experience with Docker strongly preferred

Why You’ll Love Working Here

• Daily free lunch to keep you fueled and connected with the team
• Flexible PTO so you can take the time you need, when you need it
• Comprehensive medical, dental, and vision coverage
• 6 weeks fully paid parental leave, plus an additional 6–8 weeks for birthing parents (12–14 weeks total)
• 401(k) retirement plan through Empower
• Generous employee referral bonuses—help us grow our team!

Who We Are

About Path robotics

Path Robotics is redefining what's possible in autonomous welding. Our AI-powered robotic welding systems use advanced sensing and computer vision to adapt in real time — no fixtures, no programming, no limits. We're building the future of manufacturing, and we're looking for engineers who want to get their hands dirty doing it.

The Role

We're looking for a Software Engineer to build and maintain the infrastructure that powers our AI and machine learning workflows. You'll be the bridge between our AI research team and production — building the tooling, pipelines, and deployment systems that let models go from experiment to factory floor. This is a role for someone who thinks in systems but speaks ML: you understand what researchers need, and you know how to build reliable software around it.

What You’ll Do

• Build and maintain the software infrastructure that supports robot learning, including model training, experiment tracking, versioning, and deployment.
  
  
• Develop pipelines and tools for collecting, processing, and curating large-scale robotic sensor and telemetry data.
  
  
• Support deployment of AI models onto robotic systems, including simulation, hardware integration, runtime monitoring, and feedback loops from field data.
  
  
• Build internal tools that accelerate AI engineering workflows across dataset exploration, testing, evaluation, and productionisation.
  
  
• Partner closely with AI researchers and robotics engineers to turn model requirements into robust, scalable software systems.

Who You Are

• You have 3–6 years of software engineering experience, with solid exposure to ML infrastructure, MLOps, or AI-enabled systems.
  
  
• You write strong production software in Python, and ideally also have experience with C++, ROS, or robotics software stacks.
  
  
• You have experience with PyTorch and a practical understanding of the software systems needed to support AI model development.
  
  
• You are comfortable with data pipelines, simulation environments, containerised workflows, and GPU compute in Linux environments.
  
  
• You enjoy working across AI and robotics, and can support the full path from data collection and testing through to deployment on real systems.

Why You’ll Love Working Here

• Competitive salary and equity in a well-funded, high-growth robotics company
• Comprehensive health, dental, and vision benefits
• 401(k)
• Flexible PTO
• Hands-on, collaborative culture

*Path Robotics is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.*

Who We Are

Build the Path Forward

At Path Robotics, we’re building the future of embodied intelligence. Our AI-driven systems enable robots to adapt, learn, and perform in the real world closing the skilled labor gap and transforming industries. We go beyond traditional methods, combining perception, reasoning, and control to deliver field-ready AI that is risk-aware, reliable, and continuously improving through real-world use.

Big, hard problems are our everyday work, and our team of intelligent, humble, and driven people make the impossible possible together.

We’re looking for a Software Engineer with deep experience in C++ and Python to lead the development of core systems powering our intelligent robotic platforms. In this role, you’ll architect and implement high-performance software at the intersection of real-time robotics, perception, and machine learning. You’ll take technical ownership of critical components, mentor team members, and help shape the future of our robotics software stack.

What You’ll Do

• Drive software architecture decisions across robotics and perception systems.
• Design, implement, and optimize performance-critical components of the robotics and perception stack in C++ and Python.
• Develop and integrate 3D point cloud processing algorithms for weld joint perception, including registration, pose estimation, segmentation, and geometric reasoning.
• Lead the integration of machine learning models into real-time systems, ensuring low-latency, high-reliability performance.
• Design and implement gRPC/Protobuf service interfaces with attention to schema versioning and backward-compatible API evolution.
• Instrument perception systems for production observability, building telemetry pipelines that connect algorithmic metrics to business outcomes.

Who You Are

• Bachelor's, Master's, or PhD in Computer Science, Robotics, Electrical Engineering, or a related field.
• 5+ years of professional experience in software engineering; title and compensation will be commensurate with experience.
• Solid grasp of system-level software design, concurrency, memory management, and optimization.
• Advanced proficiency in modern C++ and Python, with demonstrated experience building production services using gRPC and Protobuf.
• Experience with robotics or perception applications, including familiarity with ROS/ROS2, motion planning, and hardware interfaces is preferred.
• Proficient in Linux-based development; experience with Docker strongly preferred

Why You’ll Love Working Here

• Daily free lunch to keep you fueled and connected with the team
• Flexible PTO so you can take the time you need, when you need it
• Comprehensive medical, dental, and vision coverage
• 6 weeks fully paid parental leave, plus an additional 6–8 weeks for birthing parents (12–14 weeks total)
• 401(k) retirement plan through Empower
• Generous employee referral bonuses—help us grow our team!

Who We Are

Build the Path Forward

At Path Robotics, we’re building the future of embodied intelligence. Our AI-driven systems enable robots to adapt, learn, and perform in the real world closing the skilled labor gap and transforming industries. We go beyond traditional methods, combining perception, reasoning, and control to deliver field-ready AI that is risk-aware, reliable, and continuously improving through real-world use.

Big, hard problems are our everyday work, and our team of intelligent, humble, and driven people make the impossible possible together.

We’re looking for a Software Engineer with deep experience in C++ and Python to lead the development of core systems powering our intelligent robotic platforms. In this role, you’ll architect and implement high-performance software at the intersection of real-time robotics, perception, and machine learning. You’ll take technical ownership of critical components, mentor team members, and help shape the future of our robotics software stack.

What You’ll Do

• Drive software architecture decisions across robotics and perception systems.
• Design, implement, and optimize performance-critical components of the robotics and perception stack in C++ and Python.
• Develop and integrate 3D point cloud processing algorithms for weld joint perception, including registration, pose estimation, segmentation, and geometric reasoning.
• Lead the integration of machine learning models into real-time systems, ensuring low-latency, high-reliability performance.
• Design and implement gRPC/Protobuf service interfaces with attention to schema versioning and backward-compatible API evolution.
• Instrument perception systems for production observability, building telemetry pipelines that connect algorithmic metrics to business outcomes.

Who You Are

• Bachelor's, Master's, or PhD in Computer Science, Robotics, Electrical Engineering, or a related field.
• 5+ years of professional experience in software engineering; title and compensation will be commensurate with experience.
• Solid grasp of system-level software design, concurrency, memory management, and optimization.
• Advanced proficiency in modern C++ and Python, with demonstrated experience building production services using gRPC and Protobuf.
• Experience with robotics or perception applications, including familiarity with ROS/ROS2, motion planning, and hardware interfaces is preferred.
• Proficient in Linux-based development; experience with Docker strongly preferred

Why You’ll Love Working Here

• Daily free lunch to keep you fueled and connected with the team
• Flexible PTO so you can take the time you need, when you need it
• Comprehensive medical, dental, and vision coverage
• 6 weeks fully paid parental leave, plus an additional 6–8 weeks for birthing parents (12–14 weeks total)
• 401(k) retirement plan through Empower
• Generous employee referral bonuses—help us grow our team!

Who We Are