Position Summary
The Senior Embedded Software Engineer will support the design, development, verification, and long-term sustainment of embedded software solutions for aerospace electrical power systems. This role is responsible for participating throughout the full software development lifecycle, including requirements development, coding, debugging, validation, and certification support activities. The engineer will work closely with multidisciplinary engineering teams to develop reliable, safety-critical software solutions for military and aerospace applications.

Key Responsibilities

• Participate in all phases of embedded software development, from requirements definition through integration, verification, and maintenance.
• Develop, review, and maintain software requirements and ensure proper traceability throughout the development lifecycle.
• Design, implement, and review embedded software written primarily in C for microcontroller-based systems.
• Perform debugging and troubleshooting activities within embedded target environments and simulation platforms.
• Investigate software anomalies and perform root cause analysis for reported issues and failures.
• Utilize development and analysis tools to evaluate software performance, including timing analysis, memory utilization, stack usage, and structural coverage metrics.
• Develop and support software verification strategies aligned with program and certification requirements.
• Assist in resolving verification and validation issues identified during software testing activities.
• Support internal and external audits conducted by customers, certification bodies, and government agencies.
• Collaborate with systems, hardware, and test engineering teams to ensure software integration and compliance with system requirements.
• Contribute to long-term development programs requiring ongoing software maintenance and enhancement activities.

Required Qualifications

• Minimum of seven (7) years of experience in embedded software engineering and development.
• Strong understanding of embedded microcontroller architectures and low-level software operation.
• Experience developing software in regulated or safety-critical environments using standards such as DO-178 or IEC 61508.
• Advanced proficiency in C programming for embedded applications.
• Experience using version control systems and collaborative software development practices.
• Familiarity with lifecycle management and application lifecycle tools supporting requirements management, traceability, verification, validation, and issue tracking.
• Strong analytical and debugging skills within embedded systems environments.
• Excellent written and verbal communication skills, including the ability to clearly communicate complex technical concepts.
• Proficient with Microsoft Office applications.
• Ability to support long-duration development programs and evolving technical requirements over multiple project phases.

Preferred Qualifications

• Bachelor’s degree in Electrical Engineering, Computer Engineering, Software Engineering, Computer Science, or related discipline.
• Familiarity with MISRA C coding guidelines and best practices.
• Understanding of electrical power conversion and power electronics fundamentals.
• Ability to prepare technical presentations and support formal program reviews or audits.
• Ability to interpret and work from electrical schematics and technical drawings.
• Experience supporting aerospace or military aircraft electrical power system development programs.
• Must qualify as a U.S. Person in accordance with applicable export control regulations.

Salary Range: $140,000 - $150,000

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience. 

We are seeking a highly motivated Senior Cost Engineer to join our dynamic team.  

In this role, you will collaborate closely with Engineering, Purchasing, Product Planning, and Finance to drive end-to-end product cost across the product lifecycle. This role combines technical understanding and financial analysis to influence design and feature decisions, ensure alignment to cost targets, and improve product value and competitiveness.

Key responsibilities:

• Deliver product cost forecast and cost analyses in start cost projects including risks and opportunities.
• Drive product cost throughout the project/product lifecycle, ensuring alignment with strategic cost targets, including breaking down the overall cost target into product cost requirements at system/component level.
• Drive design to cost initiatives to create cost-efficient solutions
• Collaborate across commodities and stakeholders to balance QDCF-S (Quality, Delivery, Cost, Features, Sustainability) in design concepts.
• Act as the voice of the customer on cost, feature & value trade-offs.
• Drive innovation and continuous improvement in cost management practices, leveraging benchmarks and digital tools.
• Develop and maintain cost models using finance processes and tools to support decision-making.
• Promote cost-conscious behaviors by mentoring/coaching and sharing best practices.

Required qualifications:

• Bachelor’s degree in Finance, Engineering, or a related field (or equivalent experience).
• Strong analytical skills, including financial modeling and cost analysis.
• Ability to interpret technical data and translate it into financial implications and recommendations.
• Proven collaboration and communication skills in cross-functional, matrixed environments.

Salary Range: $90,000 - $100,000 

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience.

Position Overview

The Crew Chief II is responsible for leading complex field survey projects and ensuring all work is executed safely, efficiently, and to the highest quality standards established by McAdams’s Geomatics department. This position requires advanced technical knowledge, independent decision-making, and strong leadership skills. The Crew Chief II oversees field operations, mentors Junior Crew Chiefs  and crew members, and serves as a primary field representative for clients, demonstrating professionalism and technical excellence on every project.

Key Responsibilities

• Lead daily field operations and ensure survey tasks are executed accurately, efficiently, and in compliance with project requirements and McAdams’s standards
• Follow company standards and guidelines for surveying and / or construction staking
• Perform and oversee a wide range of surveys, including boundary, topographic, ALTA, construction staking, and specialized geomatics work
• Independently read, interpret, and apply complex construction plans—such as grading, drainage, sewer, and roadway profiles—to ensure accurate layout and data collection
• Provide technical guidance to other Geomatics team members
• Responsible for all assigned survey equipment. Ensure all equipment is properly maintained and cared for Inform group manager when instrument calibrations are needed to ensure continual accuracy in work
• Identify, analyze, and resolve potential plan, computation, or constructability issues proactively
• Communicate respectfully with clients or project neighbors to ensure a positive company image
• Maintaining a safe work environment for all crew members, assist with executing JHA's, participate with pre and post job briefs, speak up when potential hazards or unsafe work conditions are identified
• Maintain assigned work vehicle. Ensure regular vehicle maintenance is being performed
• Plan and organize field work to optimize crew efficiency, accuracy, and resource utilization
• Supervise and mentor survey crew members and Junior Crew Chiefs, fostering technical growth, accountability, and teamwork
•  Provide clear and concise direction to crews, ensuring understanding of daily objectives and safety protocols
• Ensure field data is recorded accurately, organized efficiently, and delivered in a format consistent with McAdams’s standards
• Support field staff development through on-the-job training and performance feedback
• Lead by example in demonstrating professionalism, safety, and adherence to company values
• Act as the primary field representative for the company, maintaining positive and professional relationships with clients, contractors, and project stakeholders
• Communicate proactively with Project Managers and Geomatics leadership regarding project progress, challenges, and resource needs
• Address and defuse contentious situations on-site with professionalism and diplomacy
• Ensure crew compliance with all safety standards, policies, and procedures

Skills + Experience 

• High School diploma or GED
• Demonstrate core competencies of the Crew Chief I position 
• Knowledge of TDS Software, Trimble Robotics, GPS equipment, Carlson Software, and Leica Robotics
• Punctual and dependable 
• Hardworking and detail-oriented 
• Successful completion of a functional assessment 
• Must have a valid driver’s license 
• Successfully pass a motor vehicle record check, drug test, and functional assessment  

Work Environment + Physical Demands

The characteristics described below are representative of those encountered while performing the essential functions of this position. When properly requested and when feasible (without undue hardship to the company), reasonable accommodations will be made to enable individuals with disabilities to perform essential job functions.

• Work will primarily be outside with varying environmental conditions.  
• Work will involve long-term standing and frequent walking as well as include common hazards encountered while maneuvering through project sites. 
• Work will also include working with fingers by picking, pinching, typing, and grasping often with repetitive motion. 
• Must be able to carry, lift and push/pull up to 50 pounds frequently and up to 100 pounds occasionally. 
• Must be able to stand up or walk between 8-12 hours a day. 
• Must have the ability to see, smell, hear, talk, climb, balance, stoop, kneel and twist, crouch, crawl, reach, grasp, sit, stand, and walk. 
• Weekend and overtime and/or overnight work and travel may be required. 
• Additional physical duties may be required as necessary.

Position Overview 
The Crew Chief I is responsible for the overall execution of daily assigned project tasks. This position supervises survey crew employees, ensuring all work is completed efficiently and successfully, all while following established McAdams’s guidelines for field work delivery. 

Key Responsibilities

• Knowledgeable of the various disciplines of construction staking / surveying and accurately and effectively perform required tasks during a project 
•  Ensures field crew daily tasks are performed accurately and efficiently through the various project stages following McAdams’s guidelines and company standards
• Read and interpret construction plans that include storm drainage, sewer tables, check pipe slopes/grades, contour interpolation, straight grading, and compute vertical curves for profile grade checks 
•  Identify potential plan, computation, and constructability issues
•  Demonstrate an ability to perform Boundary, Topographic, ALTA and other various types of surveys with limited or no instruction
•  Plan projects to be performed in the most efficient and accurate way possible and seeing the big picture for project execution
• Proactively communicates with group management regarding project status and/or issues 
•  Assist with maintenance of vehicles, equipment, and work sites
•  Responsible for assessing potential hazards and unsafe working conditions
•  Aids in maintaining a safe and respectful work environment by following company policies and procedures
•  Follow guidelines and company standards set forth for the Geomatics department
•  Act as the company representative in the field during client interactions
•  Communicates respectfully with clients and / or project neighbors to insure a positive company image
•  Executes JHA’s, participates with pre and post job briefs
•  Provides clear and concise direction to fellow crew members and ensure crew members perform daily tasks
•  Defuse contentious situations that may arise from interaction with client or project neighbors
•  Assist with maintenance of vehicles, equipment, and work sites
•  Mentors and trains Junior Crew Chief members
•  Prepares field notes that meet the McAdams standards and manages field data files in a manner that they can be easily interpreted and cyphered by office support staff
•  Maintains good client relations to foster and perpetuate long-term relationships 

Skills + Experience

• High school diploma or GED 
• Demonstrate core competencies of the Instrument Operator Level II
• Knowledge of TDS Software, Trimble Robotics, GPS equipment, Carlson Software, and Leica Robotics 
• Punctual and dependable    
• Hardworking and detail-oriented 
• Successful completion of a functional assessment 
• Must have a valid driver’s license 
• Successfully pass a motor vehicle records check, drug test, and functional assessment 

Work Environment + Physical Demands

• The characteristics described below are representative of those encountered while performing the essential functions of this position. When properly requested and when feasible (without undue hardship to the company), reasonable accommodations will be made to enable individuals with disabilities to perform essential job functions.
• Work will primarily be outside with varying environmental conditions.
• Work will involve long-term standing and frequent walking as well as include common hazards encountered while maneuvering through project sites. 
• Must be able to carry, lift and push/pull up to 50 pounds frequently and up to 100 pounds occasionally.  
• Must be able to stand up or walk between 8-12 hours a day. 
• Weekend and overtime and/or overnight work and travel may be required. 

Position Overview

The Senior Crew Chief is responsible for the overall execution of daily assigned project tasks. This position supervises survey crew employees ensuring all work is completed efficiently and successfully, all while following established McAdams’s guidelines for field work delivery.

Key Responsibilities

• Knowledgeable of the various disciplines of construction staking / surveying and accurately and effectively perform required tasks during a project
• Follow company standards and guidelines for surveying and / or construction staking
• Provide technical guidance to other Geomatics team members
• Knowledgeable of the various disciplines of construction staking / surveying that are needed to accurately and effectively perform required tasks 
• Lead and coordinate the daily activities of multiple crews on large projects and ensure daily project goals are met
• Possess the technical knowledge to identify and resolve issues promptly and effectively
• Competence of the functions of CAD and Carlson Software; familiarity with the process and function of field to finish, construction staking computations, and traverse adjustments
• Provide clear and concise direction to fellow crew members and ensure crew members perform daily tasks and interact with clients in a professional manner
• Responsible for all assigned survey equipment. Ensure all equipment is properly maintained and cared for
• Inform group manager when instrument calibrations are needed to ensure continual accuracy in work
• Maintain assigned work vehicle. Ensure regular vehicle maintenance is being performed
• Ensure work vehicle is kept clean, free of dents and dings so to maintain a positive company image
• Mentor and train junior Geomatics team members and staff
• Communicate respectfully with clients or project neighbors to insure a positive company image
• Maintain good client relations to foster and perpetuate a long term relationship
• Maintaining a safe work environment for all crew members. Assist with executing JHA’s, participate with pre and post job briefs. Speak up when potential hazards or unsafe work conditions are identified

Skills + Experience 

• High school diploma or GED
• Demonstrate core competencies of the Crew Chief II position
• Minimum of 7 to 10 years of experience as a Crew Chief in a survey related field
• Demonstrate knowledge of field procedures and processes as relates to surveying and / or construction staking
• Knowledge of TDS Software, Trimble Robotics, GPS equipment, Carlson Software, and Leica Robotics
• Punctual and dependable
• Hardworking and detail-oriented
• Successful completion of a functional assessment
• Must have a valid driver’s license
• Successfully pass a motor vehicle records check, drug test, and functional assessment

Work Environment + Physical Demands

The characteristics described below are representative of those encountered while performing the essential functions of this position. When properly requested and when feasible (without undue hardship to the company), reasonable accommodations will be made to enable individuals with disabilities to perform essential job functions.

• Work will primarily be outside with varying environmental conditions.
• Work will involve long-term standing and frequent walking as well as include common hazards
• encountered while maneuvering through project sites. 
• Work will also include working with fingers by picking, pinching, typing, and grasping often with repetitive motion. 
• Must be able to carry, lift and push/pull up to 50 pounds frequently and up to 100 pounds occasionally.
• Must be able to stand up or walk between 8-12 hours a day.
• Must have the ability to see, smell, hear, talk, climb, balance, stoop, kneel and twist, crouch, crawl, reach, grasp, sit, stand, and walk. 
• Weekend and overtime and/or overnight work and travel may be required.
• Additional physical duties may be required as necessary.

Position Overview 
The Crew Chief I is responsible for the overall execution of daily assigned project tasks. This position supervises survey crew employees ensuring all work is completed efficiently and successfully, all while following established McAdams’s guidelines for field work delivery. 

Key Responsibilities

• Knowledgeable of the various disciplines of construction staking / surveying and accurately and effectively perform required tasks during a project 
•  Ensures field crew daily tasks are performed accurately and efficiently through the various project stages following McAdams’s guidelines and company standards
• Read and interpret construction plans that include storm drainage, sewer tables, check pipe slopes/grades, contour interpolation, straight grading, and compute vertical curves for profile grade checks 
•  Identify potential plan, computation, and constructability issues
•  Demonstrate an ability to perform Boundary, Topographic, ALTA and other various types of surveys with limited or no instruction
•  Plan projects to be performed in the most efficient and accurate way possible and seeing the big picture for project execution
• Proactively communicates with group management regarding project status and/or issues 
•  Assist with maintenance of vehicles, equipment, and work sites
•  Responsible for assessing potential hazards and unsafe working conditions
•  Aids in maintaining a safe and respectful work environment by following company policies and procedures
•  Follow guidelines and company standards set forth for the Geomatics department
•  Act as the company representative in the field during client interactions
•  Communicates respectfully with clients and / or project neighbors to insure a positive company image
•  Executes JHA’s, participates with pre and post job briefs
•  Provides clear and concise direction to fellow crew members and ensure crew members perform daily tasks
•  Defuse contentious situations that may arise from interaction with client or project neighbors
•  Assist with maintenance of vehicles, equipment, and work sites
•  Mentors and trains Junior Crew Chief members
•  Prepares field notes that meet the McAdams standards and manages field data files in a manner that they can be easily interpreted and cyphered by office support staff
•  Maintains good client relations to foster and perpetuate long-term relationships 

Skills + Experience

• High school diploma or GED 
• Demonstrate core competencies of the Instrument Operator Level II
• Knowledge of TDS Software, Trimble Robotics, GPS equipment, Carlson Software, and Leica Robotics 
• Punctual and dependable     Hardworking and detail-oriented
• Successful completion of a functional assessment 
• Must have a valid driver’s license 
• Successfully pass a motor vehicle records check, drug test, and functional assessment 

Work Environment + Physical Demands

• The characteristics described below are representative of those encountered while performing the essential functions of this position. When properly requested and when feasible (without undue hardship to the company), reasonable accommodations will be made to enable individuals with disabilities to perform essential job functions.
• Work will primarily be outside with varying environmental conditions.
• Work will involve long-term standing and frequent walking as well as include common hazards encountered while maneuvering through project sites. 
• Must be able to carry, lift and push/pull up to 50 pounds frequently and up to 100 pounds occasionally.  
• Must be able to stand up or walk between 8-12 hours a day. 
• Weekend and overtime and/or overnight work and travel may be required. 

Position Purpose

Responsible for operations of a field survey crew including managing and mentoring Instrument Operators. Prepare and manage field notes and field data files and return them to office support staff daily.

Essential Functions + Responsibilities

• Responsible for the operation of a field survey crew
• Demonstrate an ability to prepare proper field notes and manage field data files in a manner that they can be easily interpreted and cyphered by office support staff
• Turns in notes and field files daily
• Organize and maintain all equipment and vehicles
• Maintain good client relations to foster and perpetuate long-term relationships
• Manage and mentor field personnel to ensure that project objectives are met under budget and in a timely manner
• Work outdoors in all weather conditions

Qualifications

• 5+ years of experience in survey field work
• Knowledge of TDS Software, Trimble Robotics, GPS equipment
• Punctual and dependable
• Hardworking and detail-oriented
• Candidates must have a valid driver’s license
• Candidates will have to successfully pass a motor vehicle records check, drug test, and functional assessment

Preferences

• 5+ years of experience as a Crew Chief in Construction Staking and/or Surveying preferred
• CAD experience preferred

This role is an Onsite Role: This role requires full-time presence at our Oxford, NC office.

Major Duties:

• Program and troubleshoot all aspects of electrical control systems including PLCs, robotics, servos, VFDs, and HMIs using a laptop including Allen Bradley, GE, and Siemens
• Troubleshoot AC/DC motor controls, 3 phase power distribution, and industrial machine controls with or without a schematic
• Maintain required records, including CMMS work orders, PLC program documentation and electrical drawings.
• Lead continuous improvement activities to drive equipment availability quality and performance
• Support new equipment installation and upgrades
• Wire transformers, VFD controllers, motors, and other industrial electrical equipment.
• Basic knowledge of facility building utility systems (boilers, chillers, air compressors, etc.)
• Assist in training of other technicians and maintenance staff.
• Must be able to respond to plant emergencies.
• Follow company standards and safety regulations. 
• Identifies unsafe conditions and make corrections when appropriate.

Requirements:

• 5 years’ experience in industrial electrical controls or educational equivalent.
• Able to stand and/or walk 90% of an 8-hr day which includes climbing a ladder or steps.
• Must meet the vision and hearing requirements.
• Must pass written and practical electrical test. 
• Arc flash and Lock Out Tag Out training.
• Employee required to provide hand tools, drills, etc. (Revlon will provide multi-meters, laptops, etc)

 Shift Hours for 2nd Shift: 2:45 pm - 11:15 pm

#LI-KM1 #LI-Onsite

The base pay range for this position is $32.00 / hour with a $1.10 shift differential for 2nd Shift; however base pay offered may vary depending on skills, experience, job-related knowledge, and geographic location. Certain positions may also be eligible for short-term incentives as part of total compensation.

Employees (and their families) are eligible for medical, dental, and vision benefits. Employees are covered by the company-paid basic life insurance policy and company-paid short-term disability insurance (the benefit commences upon hire and allows for a portion of base salary for up to 26 weeks if you are disabled). Other benefits offered to employees include but are not limited to the following: long-term disability, supplemental life insurances, flexible spending accounts, critical illness insurance, group legal, identity theft protection, etc. Employees are also able to enroll in our 401k Retirement Savings Plan.

Employees will also receive 3 weeks of vacation, pro-rated based on date of hire for the 1st year of employment and twelve paid holidays throughout the calendar year. Vacation will depend on role.

What You’ll Do

• Program, set up, and operate CNC mills, lathes, multi‑axis machines, grinders, EDM, and manual equipment to optimize performance and minimize downtime
• Read and apply engineering drawings, blueprints, and advanced GD&T
• Perform complex offsets, tool compensation, and program adjustments to maintain tight tolerances
• Manufacture precision components to tolerances of .0001" or better with minimal supervision
• Troubleshoot machining, tooling, and material issues and implement corrective actions
• Recommend and execute process, tooling, and programming improvements
• Partner with Tool Design to develop fixtures, jigs, and custom tooling
• Conduct in‑process and final inspections using precision measurement equipment
• Share knowledge and best practices to support team development
• Adhere to safety, quality, and 5S workplace standards

Required Qualifications

• AA/AS degree or equivalent technical training with 8+ years of relevant machining experience
• Advanced expertise in CNC and manual machining and programming
• Strong working knowledge of GD&T and precision measurement
• Ability to work independently and resolve complex technical problems
• High mechanical aptitude and attention to detail

Preferred Qualifications

• Aerospace or defense manufacturing experience
• Machining certifications or advanced technical education
• Tool and die or specialized machining background
• Experience with continuous improvement methodologies
• Strong communication and mentoring skills

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience.

Note: Due to the nature of the work, only US Persons (citizens or permanent residents) need apply for this position.

We are seeking an experienced Aircraft Exterior Lighting Engineer to lead the design, development, and validation of advanced exterior lighting systems for next-generation aircraft. This role will focus on delivering reliable, compliant, and high-performance lighting solutions across a range of platforms, including conventional and electric aircraft.

The ideal candidate has hands-on experience with aircraft lighting systems and a strong understanding of environmental, electrical, and regulatory considerations.

Key Responsibilities

Design and develop aircraft exterior lighting systems, including:

Navigation (position) lights

Anti-collision lighting

Landing and taxi lights

Recognition and logo lighting

Perform and document engineering analyses, including:

Electrical load and power consumption assessments

Thermal performance and heat dissipation analysis

Environmental durability (vibration, temperature extremes, moisture exposure)

Support system integration activities and ensure compatibility with aircraft electrical and structural systems

Collaborate with cross-functional teams including electrical, mechanical, and certification engineering

Ensure compliance with applicable regulatory and environmental standards

Support testing and qualification activities, including environmental and EMI/EMC validation

Contribute to design reviews, technical documentation, and continuous improvement efforts

Required Qualifications

Bachelor’s degree in Electrical Engineering, Aerospace Engineering, Mechanical Engineering, or related field

Direct experience designing or supporting aircraft exterior lighting systems

Familiarity with DO-160 environmental testing and qualification standards

Knowledge of EMI/EMC principles and their impact on aircraft systems

Experience performing electrical and thermal analyses

Strong understanding of aircraft electrical systems and integration considerations

Experience in eVTOL, UAV, or electric aircraft development programs

Familiarity with LED-based lighting technologies and control systems

Experience with simulation or analysis tools for thermal and electrical performance

Knowledge of certification requirements for exterior lighting systems

Experience working with suppliers and managing component development

Salary Range: $100,000-$125,000

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience 

Key Responsibilities

Develop aircraft-level verification test cases derived from system requirements and applicable regulatory standards

Ensure end-to-end traceability between requirements, verification methods, test cases, and results

Author, review, and maintain key verification artifacts, including:

Verification Plans
Test Procedures and Automated Test Scripts
Verification Reports and Compliance Documentation
Support the integration and execution of verification activities across multiple environments, including:
Ground testing (bench testing, iron bird, system integration labs)
Flight test verification programs
Collaborate with systems engineering, safety, and certification teams to ensure alignment with development and compliance objectives
Contribute to continuous improvement of verification processes, tools, and methodologies

Required Qualifications

Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, or related field
Experience with FAA certification processes (Part 23, Part 27, or similar)
Familiarity with ARP4754A and ARP4761 development and safety assessment processes
Exposure to DO-160 environmental testing standards
Experience supporting flight test programs and verification activities
Strong understanding of systems engineering principles, requirements validation, and verification methodologies
Experience with scripting or automation tools (e.g., Python, MATLAB, or similar)
Experience working in integrated test environments (iron bird, SIL/HIL systems)
Knowledge of requirements management and traceability tools (e.g., DOORS, Jama, Polarion)
Familiarity with data analysis and test automation frameworks
Strong technical writing and documentation skills

Salary Range: $100,000-$125,000

We are seeking a Senior Electrical Utilities Engineer to act as the site’s Owner’s Engineer
for ongoing capital projects in a GMP manufacturing environment. This role involves highpower, industrial electrical activities on utilities and building infrastructure.
You will act as a technical back-checker engineering contractors, validating that designs, specifications, and installations are compliant with NEC, North Carolina codes, and the
company safety standards.
Responsibilities:
• Review and approve single-line diagrams, load studies, and power distribution designs
• Validate switchgear, MCCs, transformers, breakers, cabling, grounding
• Verify motor sizing and protection (ex: 200 HP motors, VFDs, starters)
• Ensure compliance with:
o NEC
o State of North Carolina electrical codes
o GMP / EHS standards
• Act as technical lead for engineering firms
• Identify design gaps, safety risks, and non-compliances
• Support construction reviews, redlines, FAT/SAT
• Be the electrical owner rep for capital and brownfield projects
Requirements:
• 10+ years experience in industrial / utilities electrical engineering
• Strong background in:
o Power distribution
o High-voltage and high-power systems
o Industrial motors and drives
• Experience acting as Owner’s Engineer
• Strong NEC knowledge
• Experience in pharma, biotech, life sciences, or GMP manufacturing environments
• Experience managing EPCs, contractors, inspectors, AHJs
• Comfortable walking down sites and reviewing as-built installations
Nice to have:
• Pharma manufacturing or clean utility systems
• Brownfield capital projects
• Experience in regulated environments (FDA, GMP, EHS)
• Multi-discipline project exposure (HVAC, piping interfaces)

Salary Range: $100,000-140,000

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience 

Position Responsibilities

• Engineer mechanical components and subassemblies for rotating machinery to satisfy customer specifications and targeted performance objectives, working under the guidance of a lead engineer
• Create detailed 3D CAD models and 2D engineering drawings, and perform supporting analyses such as tolerance accumulation, bearing load calculations, and preload assessments
• Ensure designs comply with company requirements and applicable industry standards, including GD&T and design-for-manufacturability principles
• Serve as a technical contributor in design, manufacturing, and test reviews by evaluating designs, identifying risks, and recommending corrective actions
• Execute assigned tasks in alignment with approved budgets and project schedules
• Review customer requirements and contribute to technical proposals, cost estimates, test plans, process qualification documents, bills of materials, schedules, and engineering reports as needed
• Proactively identify and resolve technical issues affecting current products or new development efforts
• Maintain clear, timely communication with peers and leadership regarding technical progress, challenges, and potential risks
• Assist with testing and validation activities for both new and existing products, with oversight from senior engineering staff
• Follow established safety practices and actively support continuous improvement of health, safety, and environmental initiatives
• Support occasional domestic and international travel (typically once per quarter)
• Be available for extended or off-hour work during peak project phases when required

Education and Experience

• Bachelor’s degree in Mechanical Engineering or a closely related discipline
• Minimum of four (4) years of experience in mechanical design within a product development and manufacturing environment

Technical Skills and Competencies

• Hands-on experience designing rotating machinery such as motors, generators, or similar systems
• Ability to create and interpret engineering drawings and specifications, including proper application of GD&T
• Sound engineering judgment across multiple mechanical disciplines
• Strong analytical and problem-solving capabilities
• Effective interpersonal and collaboration skills for working with cross-functional teams and customers
• Well-developed organizational, documentation, and reporting skills
• Proficiency in developing 3D CAD models and 2D drawings
• Working knowledge of Microsoft Office tools
• Familiarity with common shop and inspection tools, including measurement equipment

Preferred Qualifications

• Experience designing bearing systems and wound components
• Knowledge of rotor dynamics principles
• Familiarity with oil and air cooling approaches for rotating equipment
• Exposure to aerospace standards such as DO-160, ARP4754A, and ARP4761
• Experience using CATIA

Salary Range:$85,000-90,000

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience 

We are seeking a Mid-Level Avionic Software Engineer with hands-on experience developing safety-critical aerospace software in accordance with DO-178 standards, typically at Design Assurance Level (DAL) A or B. The ideal candidate has 5–8 years of experience and is comfortable contributing across the software lifecycle, from requirements and implementation to integration and verification, within a highly regulated engineering environment.

Responsibilities:

• Contribute to the design, development, implementation, and verification of embedded avionic software in compliance with DO-178C (DAL A or B).

• Implement and optimize software components and algorithms for constrained, real-time embedded environments.

• Support system integration activities by collaborating with systems, hardware, and test engineering teams.

• Participate in defining software architecture and interface requirements, ensuring traceability and adherence to aerospace standards.

• Perform and participate in formal design and code reviews to ensure safety, quality, and regulatory compliance.

• Assist with hardware bring-up, low-level debugging, and troubleshooting using tools such as oscilloscopes, logic analyzers, and protocol analyzers.

• Work with embedded communication protocols (e.g., CAN, SPI, I2C, ARINC 429, MIL-STD-1553) to ensure reliable system interactions.

Qualifications;

• Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, Computer Science, or a related technical discipline.

• 5–8 years of experience in embedded software development within aerospace or other safety-critical industries.

• Direct experience working with DO-178C development, verification, and certification processes (DAL A or B strongly preferred).

• Proficiency in C and/or C++, with familiarity in Python or other scripting languages for test or automation tasks.

• Solid understanding of embedded systems design, RTOS concepts, timing constraints, and low-level hardware interfaces.

• Ability to work fully on-site in Raleigh, North Carolina.

Salary Range: $100,000 - $130,000 

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience 

**Due to the nature of the work, only US Persons (citizens or permanent residents) need apply for this position**

Are you the person who knows everyone on campus? Are you fascinated by how AI and robots perceive the world? We're looking for energetic, outgoing, and tech-savvy Campus Ambassadors to help us build the next generation of robotics technology. In this role, you'll be the face of our robotics initiatives on your campus. Your mission is to engage with fellow students and guide them through short, fun data collection sessions using an iPhone. You aren't just collecting data—you're helping train the computer vision models that will power the future.

What You'll Do

• Engage & Recruit: Approach students on campus (quads, student unions, study areas) and invite them to participate in a paid/incentivized data recording session.
• Capture Data: Guide students through recording high-quality video and sensor data of participants performing specific movements or interacting with objects using our app.
• Quality Control: Ensure lighting, framing, and movement instructions are followed strictly to ensure data is usable for machine learning.
• Educate: Briefly explain the purpose of the technology to participants, creating excitement about the project.
• Manage Goals: Meet weekly targets for the number of unique participants recorded.

Who You Are

• The Social Butterfly: You're comfortable walking up to strangers, striking up a conversation, and explaining complex ideas simply. Rejection doesn't phase you.
• Tech-Fluent: You're comfortable using iOS devices, troubleshooting basic app issues, and following technical instructions.
• Detail-Oriented: You understand that "garbage in, garbage out" applies to AI. You care about capturing the perfect shot.
• Reliable: You show up when you say you will and you treat the equipment with care.
• Currently Enrolled: You're a student at a University with availability to work 10–15 hours per week (flexible schedule).
• Physically Capable: Comfortable holding an iPhone steady for extended periods and standing/walking around campus for the duration of a shift.

Nice to Haves

• Interest in Computer Science, Robotics, Engineering, or Marketing
• Experience in street teaming, sales, or photography
• Previous ambassador, promotional, or field marketing experience

The Perks

• Competitive Pay: Earn competitive hourly rates + performance bonuses for hitting high-volume targets
• Flexible Schedule: Work between classes or on weekends
• Resume Booster: Gain hands-on experience with an AI/Robotics project and field operations
• Networking: Connect with the engineering and product teams working on cutting-edge robotics technology

#LI-BJ1