What you’ll do

Become part of an iconic brand that is set to revolutionize the electric pick-up truck & rugged SUV marketplace by achieving the following:

• Responsible for developing Scout Exterior Lighting Standards to ensure a robust product. Ensuring appropriate vehicle connection points for electrical are present in the base truck and SUV vehicle architectures.
• Participate in and/or lead development of RFQ packages, tech reviews, and supplier selection.
• Lead Product Development Team(s) to collaborate cross functionally across Scout internal functions, and suppliers to set design direction, and lead development, packaging, and execution of unique Scout accessories to bring them to market.
• Contribute to the development of product specification books, test plans, DVP&R, DFMEA, Control Plans, and Quality Assurance requirements.
• Direct design and analysis groups to create 3D math models (CAD), complete 3D packaging, and validate with analytical models (Optics, FEA, CFD, etc.) to fulfill functional and design requirements, and ensure compatibility, using Design Rules, Regulatory items, and attributes, such as NVH, water management, craftsmanship, etc.
• Be a key member and decision maker within the technical leadership team and liaison with all Scout functional teams.
• Develop and maintain all component and subsystem requirements and specifications, including device transmittals and interface control documents (ICD).
• Ensure all program targets, including Piece Cost, ED&D Budget, Timing, Weight, and Quality, are met.
• Track open issues and collaborate with other functional groups as needed to drive issues to resolution efficiently and effectively.
• Ensure on-time validation and adequate testing coverage for all requirements (component, system, and vehicle) is achieved and traceability is maintained for assigned systems and components.
• Conduct product evaluation and design reviews during prototype and pre-production development phases.
• Develop prototypes for virtual and physical verification testing, including field testing.
• Proactively stay attuned to new advancements, market trends, consumer experience and propose system improvements accordingly.
• Follow automotive industry design best practices, such as: Robust Engineering, Design for Manufacturability, and Design for Serviceability.

Location & Travel Expectations:

• This role may be based out of the Scout Motors corporate headquarters in Charlotte, NC. 
• This role requires 4-5 days per week in the office, with regular in-person meetings and events. 
• Applicants should expect that the role will require the ability to convene with Scout colleagues in person and travel to participate in events on behalf of the company from time to time.
• Any Additional Travel Requirements (optional): Must be able to support International travel, as needed. Passport Required

What you’ll bring 

We expect all Scout employees to have integrity, curiosity, resourcefulness, and strive to exhibit a positive attitude, as well as a growth mindset. You’ll be comfortable with change and flexible in a fast-paced, high-growth environment. You’ll take a collaborative approach to achieve ambitious goals. Here's what else you'll bring: 

• Bachelor’s or master’s degree in mechanical engineering, electrical engineering, or a relevant field
• Min 8 years experience required in position okay for lighting areas and relevant automotive assignments. Including all three phases of product development (Design, Test and Launch)
• Skilled in utilizing CATIA for designing and developing detailed parts
• Strong technical skills and expertise in lighting components and systems, coupled with a 1st principles approach to problem solving
• High level of oral and written communication skills.
• Excellent organization and prioritization skills.
• Familiarity with computer-aided engineering (CAE) or direct experience in this field
• An ability to build strong working relationships with people across all organizational levels/functional teams
• Strong sense of teamwork, able to act as mentor to less experienced engineers.
• Experience working on Electric Vehicle programs desirable.
• Comfort with the ambiguity and ability to thrive in fast-paced environments

What you'll gain

The benefits of joining Scout include the chance to build products and a company from the ground up.  This is a chance to create something new and lasting – with an iconic brand at its foundation.  In addition, Scout provides competitive compensation and benefits to support your physical, mental, and financial wellbeing. Program specifics are detailed in company policies and employee benefit guides, select highlights:

• Competitive insurance including:
  • Medical, dental, vision and income protection plans
• 401(k) program with:
  • An employer match and immediate vesting
• Generous Paid Time Off including:
  • 20 days planned PTO, as accrued
  • 40 hours of unplanned PTO and 14 company or floating holidays, annually
  • Up to 16 weeks of paid parental leave for biological and adoptive parents of all genders
  • Paid leave for circumstances related to bereavement, jury duty, voting time, or military leave

Pay Transparency

This is a full-time, exempt position eligible to receive a base salary and to participate in an annual performance bonus program. Final salary offered will be determined based on factors including but not limited to the candidate's skills and experience. The annual performance bonus program is preset and not candidate dependent.

Initial Base Salary Range: $130,000.00 - $160,000.00

Internal Leveling Code: IC8

What you’ll do

Become part of an iconic brand that is set to revolutionize the electric pick-up truck & rugged SUV marketplace by achieving the following:

• Perform nonlinear structural simulations using LS-DYNA for component, subsystem, and full-vehicle applications.
• Analyze structural performance, load paths, stiffness, intrusion, and energy management across crash scenarios.
• Build, manage, and execute high-fidelity FE models using ANSA, Primer, and HyperMesh.
• Correlate structural CAE predictions with physical test data and support post-test reviews and root-cause investigations.
• Develop structural countermeasures and support design teams with data-driven recommendations.
• Support CAE integration across crash, NVH, durability, thermal, aero, and vehicle-dynamics domains.
• Review structural changes, reinforcements, joints, and stiffness updates for cross-attribute impacts.
• Contribute to vehicle milestone readiness, design releases, and cross-functional sign-off activities.
• Participate in multi-attribute technical reviews and support continuous improvement of CAE tools and processes.
• Support implementation of AI/ML tools to streamline CAE workflows, including automated preprocessing, model setup, and simulation quality checks.
• Support development and use of AI-driven predictive models to complement traditional simulations, improve early design guidance, and assist cross-attribute decision-making.

Who You Are

• A technically strong CAE engineer with a solid understanding of vehicle crashworthiness and structural mechanics.
• Comfortable working in a cross-functional OEM product development environment.
• Detail-oriented, analytical, and capable of balancing engineering rigor with program timing.
• Able to communicate complex technical results clearly to engineering and non-engineering stakeholders.
• Motivated by building safe, durable vehicles and continuously improving engineering processes.

Location & Travel Expectations:

• This role is based out of the Scout Motors corporate headquarters in Charlotte, NC.
• This role requires 4-5 days per week in the office, with regular in-person meetings and events.
• Applicants should expect that the role will require the ability to convene with Scout colleagues in person and travel to participate in events on behalf of the company from time to time to test facilities, supplier sites, or manufacturing location
• Travel: Domestic and international travel required, approximately 10% of the time. Valid driver's license required. 

What you’ll bring 

We expect all Scout employees to have integrity, curiosity, resourcefulness, and strive to exhibit a positive attitude, as well as a growth mindset. You’ll be comfortable with change and flexible in a fast-paced, high-growth environment. You’ll take a collaborative approach to achieve ambitious goals. Here's what else you'll bring: 

Required

• Bachelor’s degree in mechanical engineering or a related field.
• 10+ years of experience in structural crash CAE within an automotive OEM or Tier-1 supplier environment.
• Hands-on experience with LS-DYNA.
• Proficiency with CAE pre- and post-processing tools such as ANSA, Primer, HyperMesh, or equivalent.
• Working knowledge of global crash regulations and consumer safety protocols.
• Strong technical documentation and communication skills.
• Ability to work legally in the United States without employer sponsorship.

Preferred

• Master’s degree in mechanical engineering or related discipline.
• Experience with electrified vehicles (BEV/REEV) and/or frame-based vehicle architectures.
• Exposure to CAE–test correlation, DOE, or robustness studies.
• Familiarity with advanced material or damage models (e.g., GISSMO).
• Experience supporting OEM release and sign-off processes.

What you'll gain

The benefits of joining Scout include the chance to build products and a company from the ground up.  This is a chance to create something new and lasting – with an iconic brand at its foundation.  In addition, Scout provides competitive compensation and benefits to support your physical, mental, and financial wellbeing. Program specifics are detailed in company policies and employee benefit guides, select highlights:

• Competitive insurance including:
  • Medical, dental, vision and income protection plans
• 401(k) program with:
  • An employer match and immediate vesting
• Generous Paid Time Off including:
  • 20 days planned PTO, as accrued
  • 40 hours of unplanned PTO and 14 company or floating holidays, annually
  • Up to 16 weeks of paid parental leave for biological and adoptive parents of all genders
  • Paid leave for circumstances related to bereavement, jury duty, voting time, or military leave

Pay Transparency

This is a full-time, exempt position eligible to receive a base salary and to participate in an annual performance bonus program. Final salary offered will be determined based on factors including but not limited to the candidate's skills and experience. The annual performance bonus program is preset and not candidate dependent.

Initial base salary range = $130,000.00 - $160,000.00

Internal leveling code: IC8

What you’ll do

Become part of an iconic brand that is set to revolutionize the electric pick-up truck & rugged SUV marketplace by achieving the following:

• Responsible for engineering design, and developing vehicle exterior systems including bumpers, fascia, grilles, brackets, exterior trim, bumper beams, hitches and structural reinforcements.
• Develop Scout Bumper/Fascia Standards and Requirements to ensure a robust product. Ensure seamless integration into production processes while meeting all required program milestones and deliverables.
• Participate in and/or lead development of Request for Quotation (RFQ) packages, technical reviews, and supplier selection.
• Lead Product Development Team(s) to collaborate cross functionally across Scout internal functions, and suppliers to set design direction, and lead development, packaging, and execution of unique Scout components to develop creative and feasible designs that meet both aesthetic and functional requirements.
• Ensure all program targets, including Piece Cost, Investment, ED&D Budget, Timing, Weight, and Quality, are met. 
• Contribute to the development of product specification books, test plans, DVP&R, DFMEA, Control Plans, and Quality Assurance requirements.
• Direct design and analysis groups to create 3D math models/Computer Aided Design(CAD), complete 3D packaging, and validate with analytical models (FEA, CFD, Crash, etc.) to fulfill functional and design requirements, and ensure compatibility, using Design Rules, Regulatory items, and attributes, such as NVH, water management, craftsmanship, etc.
• Ensure all exterior components meet global safety regulations and work within defined manufacturing processes such as injection molding, painting and assembly.
• Be a key member and decision maker within the technical leadership team and liaison with all Scout functional teams.
• Develop and maintain all component and subsystem requirements and specifications, including device transmittals and interface control documents (ICD).
• Track open issues and collaborate with other functional groups as needed to drive issues to resolution efficiently and effectively.
• Ensure on-time validation and adequate testing coverage for all requirements (component, system, and vehicle) is achieved and traceability is maintained for assigned systems and components.
• Conduct product evaluation and design reviews during prototype and pre-production development phases.
• Develop prototypes for virtual and physical verification testing, including field testing.
• Lead development and execution of exterior components including close collaboration with tool shops, suppliers to support tooling design build, debugging, and production readiness.
• Support product launches and post-launch activities by troubleshooting fit, finish, manufacturing concerns, while driving continuous improvement initiatives focused on quality, cost and design robustness.
• Proactively stay attuned to new advancements, market trends, consumer experience and propose system improvements accordingly.
• Follow automotive industry design best practices, such as: Robust Engineering, Design for Manufacturability, and Design for Serviceability.

Location & Travel Expectations:

• This role may be based out of the Scout Motors corporate headquarters in Charlotte, NC. 
• This role requires 4-5 days per week in the office, with regular in-person meetings and events. 
• Applicants should expect that the role will require the ability to convene with Scout colleagues in person and travel to participate in events on behalf of the company from time to time.
• Travel: Domestic and international travel must be supported. Passport required.

What you’ll bring 

We expect all Scout employees to have integrity, curiosity, resourcefulness, and strive to exhibit a positive attitude, as well as a growth mindset. You’ll be comfortable with change and flexible in a fast-paced, high-growth environment. You’ll take a collaborative approach to achieve ambitious goals. Here's what else you'll bring: 

• 5+ years of experience in vehicle exterior bumpers, fascia, Class A components and/or trim mechanical areas and relevant automotive assignments. Including all three phases of product development (Design, Test and Launch)
• Exterior systems technical skills/expertise with a 1st principles approach to problem solving.
• Bachelor’s degree in mechanical or relevant engineering field.
• Demonstrated experience in solving complex technical challenges in product design and development.
• Computer aided design (CAD) tools, including CATIA V5/V6 experience is highly recommended.
• Product lifecycle management (PLM) tools, including Teamcenter experience is highly recommended, VW Toolbase a plus.
• Computer aided engineering (CAE) awareness and/or direct experience.
• An ability to build strong working relationships with people across all organizational levels.
• Strong understanding of mechanical design principles, including GD&T (Geometric Dimensioning & Tolerancing), material selection, and design for manufacturing (DFM).
• Hands-on experience in automotive product launch, including prototype builds and production ramp-up.
• Familiarity with design and engineering considerations for high-volume automotive production.
• Ability to work collaboratively within cross-functional teams, including suppliers, design studios, and vehicle engineering teams.
• Excellent communication skills to effectively present technical concepts, findings, and recommendations to both technical and non-technical stakeholders.

What you'll gain

The benefits of joining Scout include the chance to build products and a company from the ground up.  This is a chance to create something new and lasting – with an iconic brand at its foundation.  In addition, Scout provides competitive compensation and benefits to support your physical, mental, and financial wellbeing. Program specifics are detailed in company policies and employee benefit guides, select highlights:

• Competitive insurance including:
  • Medical, dental, vision and income protection plans
• 401(k) program with:
  • An employer match and immediate vesting
• Generous Paid Time Off including:
  • 20 days planned PTO, as accrued
  • 40 hours of unplanned PTO and 14 company or floating holidays, annually
  • Up to 16 weeks of paid parental leave for biological and adoptive parents of all genders
  • Paid leave for circumstances related to bereavement, jury duty, voting time, or military leave

Pay Transparency

This is a full-time, exempt position eligible to receive a base salary and to participate in an annual performance bonus program. Final salary offered will be determined based on factors including but not limited to the candidate's skills and experience. The annual performance bonus program is preset and not candidate dependent.

Initial Base Salary Range: $130,000.00 - $160,000.00

Internal Leveling Code: IC9

What you’ll do

Become part of an iconic brand that is set to revolutionize the electric pick-up truck & rugged SUV marketplace by achieving the following:

• Create high-quality and accurate 3D CAD class A surface models for interiors and exteriors, that capture both engineering criteria and the design theme. 
• Drive issues to resolution by creating surface proposals that satisfy both engineering, production (manufacturing), and studio aesthetic intent. 
• Organize and compile data for reviews and releases, working with internal Scout team + external suppliers. 
• Lead data reviews with engineering and design. 
• Work within development timelines to deliver data for all needed milestones and releases. 

Location & Travel Expectations:

• This role may be based out of the Scout Motors corporate headquarters in Charlotte, NC or Novi, MI. 
• This role requires 4-5 days per week in the office, with regular in-person meetings and events. 
• Applicants should expect that the role will require the ability to convene with Scout colleagues in person and travel to participate in events on behalf of the company from time to time.

What you’ll bring 

We expect all Scout employees to have integrity, curiosity, resourcefulness, and strive to exhibit a positive attitude, as well as a growth mindset. You’ll be comfortable with change and flexible in a fast-paced, high-growth environment. You’ll take a collaborative approach to achieve ambitious goals. Here's what else you'll bring: 

• Bachelor's degree in mechanical engineering or industrial design; or equivalent experience. 
• 4+ years of experience in class A surface design & digital modeling, in a studio environment. 
• Expert-level proficiency in CAD surfacing software, such as CATIA V5, Catia 3D Experience (3DX), Alias, or ICEM surf. 
• Ability to create high-quality class A surface models with proper techniques that deliver the design theme/vision while also capturing feasibility requirements.  
• High understanding of engineering technical inputs and how/why these drive the surface, along with an ability to accurately incorporate these requirements into the surface. 
• Ability to work on either interior or exterior and in any phase of a program with equal dexterity. 
• Strong understanding of overall vehicle development process and how surface releases influence the development process. 
• Strong multitasking skills, with the ability to manage multiple priorities and deliver results within tight deadlines. 

What you'll gain

The benefits of joining Scout include the chance to build products and a company from the ground up.  This is a chance to create something new and lasting – with an iconic brand at its foundation.  In addition, Scout provides competitive compensation and benefits to support your physical, mental, and financial wellbeing. Program specifics are detailed in company policies and employee benefit guides, select highlights:

• Competitive insurance including:
  • Medical, dental, vision and income protection plans
• 401(k) program with:
  • An employer match and immediate vesting
• Generous Paid Time Off including:
  • 20 days planned PTO, as accrued
  • 40 hours of unplanned PTO and 14 company or floating holidays, annually
  • Up to 16 weeks of paid parental leave for biological and adoptive parents of all genders
  • Paid leave for circumstances related to bereavement, jury duty, voting time, or military leave

Pay Transparency

This is a full-time, exempt position eligible to receive a base salary and to participate in an annual performance bonus program. Final salary offered will be determined based on factors including but not limited to the candidate's skills and experience. The annual performance bonus program is preset and not candidate dependent.

Initial Base Salary Range: $110,000.00 - $135,000.00

Internal Leveling Code: IC9

Your Opportunity

Scion is paving a path in student living and the Facilities Manager is a keystone team member in the execution of our vision. This position ensures safety and functionality of the property’s buildings and equipment and ensures optimal service is carried out by the onsite Facilities team and any third-party vendors.

The Facilities Manager is a subject matter expert and experienced leader who excels in a fast-paced, agile, collegiate environment. This role demands superior problem solving, leadership and unwavering follow through. Those in the Facilities Manager position may also be asked to assist other properties.

Your Benefits

• FLSA Status Exempt
• Discretionary annual bonus
• Paid Time Off + Floating Holidays
• Health Insurance
• Dental Insurance
• Vision Insurance
• 401k Matching
• Paid Parental Leave
• Learning reimbursement opportunities

Your Responsibilities 

• Manage all building services and preventative maintenance programs to the best of industries practices, the Scion’s Standard Operating Procedures, and in compliance with the State/Federal Govt./OSHA’s Codes/regulations.
• Manage the day-to-day operations including but not limited to heating, ventilating, air conditioning (HVAC), plumbing and piping, fire protection, and general building maintenance and troubleshooting, building automation systems and building maintenance
• Monitor systems and provides diagnostics, preventative maintenance, annual testing, permitting, certification for all major building systems including, but not limited to: chilled water systems with fan coil units, air handling units with outside condensers including roof top units (RTU), building stationary boilers, hot & cold water distribution systems (plumbing, pressure/pneumatic/storage tanks, variable frequency drive (and pumps & motors), domestic hot water heaters, building automation systems (BAS), electrical distribution systems, switchgears and controls, generators, uninterrupted Power supply (UPS), elevators and lifts, parking structures (ventilation/drainage Systems, T-Joints), entrance & exit Gates and overhead doors, shingled/tarred roof, TPO membrane roofing system, EIFS, brick, vinyl, & cementitious sideboard, ACP, curtain walls, insulated glass units (IGUs).
• Operate and manage all life safety systems including fire pumps, fire alarm monitoring panels, dry/wet sprinkler systems, visual and audible alarms, back flow preventers, smoke detectors, CO2 sensors/alarms, fire extinguishers, emergency lighting, means of egress, fire
• Prioritize and schedule maintenance work, assuring quality of work consistent with Scion’s standards.
• Manage the Facilities Technicians to ensure all service requests are completed within Scion standards and are appropriately and accurately
• Manage facilities budgets.
• Review completed work to verify conformance to standards or repair
• Ensure all emergency, routine maintenance/repairs are carried out in a timely and professional manner.
• Ensure all Preventive maintenance is carried out in a timely and professional manner.
• Respond promptly and effectively to all safety/risk-management-related issues at the
• Review completed work orders for accuracy of labor hours, materials’ cost, and track recurring equipment failures.
• Conduct regular inspection tours of buildings, interior common areas and the exterior of the property, equipment and surrounding grounds for deficiencies, potential safety, health, or code problems and necessary
• Prepare written reports summarizing findings, and advises other building users as appropriate, of the
• Provide recommendations for dealing with problems noticed in
• Oversee and supervise “Turn” preparation including the prompt inspection of vacated units, makes appropriate repairs and charges, and ensures completion as
• Inspect vacant units after repairs and maintenance have been completed to determine quality of work performed and readiness for
• Manage the maintenance spare parts and the tools inventory, determining which parts/tools to stock and their stock level and working directly with General Manager to maintain inventory of parts, tools, and supplies within
• Maintain shop appearance and all mechanical, supply, electrical and storage facilities on
• Ensure proper maintenance of equipment to ensure warranty compliance and extended useful life.
• Oversee all other contracted work in the building, obtaining bids and negotiating prices with vendors and contractors, as approved by the General Manager, Regional Manager or the Regional Facility Manager.
• Coordinate deliveries, schedules, and performance of all facility related
• Ensure proper safety procedures are followed, personal protective equipment is used, and health & safety policies are
• Manage process for keying and coring/coding of locks and maintain lock procedures, logbooks and protocols for key management and
• Effectively implement standard operating procedures and preventive maintenance programs according to Scion’s
• Take part in emergency preparedness planning and acts as essential personnel in
• Escalate unique or urgent repairs/replacements to General Manager and Regional Facilities Manager.
• Maintain records on all major systems including maintenance manuals, manufacturer’s cut sheets, warranties, and equipment
• Work closely with the General Manager and Regional Facilities Manager to manage, formulate and track facilities and capital
• Hire, train and develop Facilities team members, holding them accountable for delivering a high level of

The responsibilities listed above may not be all-inclusive.

What We Require

• High school diploma/GED, trade school diploma, or military training
• 8 years of relevant experience managing building system in multi-unit residential properties, 5 years of supervisory experience
• 5 years’ experience with building automation systems, and life safety systems
• EPA 608 Universal certification
• HVAC/EPA 608 Universal certification
• Certified Pool Operator (CPO), or intention to obtain within six months
• Expertise in plumbing, HVAC, electrical and mechanical systems as well as generally accepted maintenance practices
• Boiler operator or Stationary Engineer Certificate/License
• Ability to read and interpret documents such as design drawings, blueprints, safety guidelines, operating and maintenance instructions and procedural manuals
• Ability to manage multiple projects simultaneously, set priorities and meet deadlines
• Basic computer working knowledge, including Microsoft Office and CMMS
• Valid driver’s license
• Ability to stand 8 hours or longer per day and lift up to 100 lbs. as necessary

 Operational Details

• Job location is at the assigned property. May be required to travel periodically.
• Serves in an “on-call” capacity, except during approved PTO periods.

The Scion Group LLC provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, religion, creed, national origin, color, gender, sex, sexual orientation, gender identity or expression, age, physical or mental disability (as long as the employee/applicant is otherwise qualified for the job with or without a reasonable accommodation), genetic information, HIV/AIDS status, marital status, uniformed service, veteran status, pregnancy or other legally protected status or category under federal or state law. The Scion Group LLC complies with applicable state and local laws governing nondiscrimination in employment in all locations in which the Company has properties. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation, training and other terms and conditions of employment. The Scion Group LLC is committed to the principles of equal employment opportunities.

IND3 #wearehiring #werehiring 

Anduril’s Manufacturing team is seeking a Senior Industrial Engineer to join our Composites Manufacturing team in North Carolina. This team engineers the manufacturing solution to turn designs into prototypes rapidly, and subsequently transitions composites manufacturing projects from development into full-rate production. In this role, you will use industrial engineering tools and skills to increase efficiency and quality of each manufacturing line in concert with its production plan. You will leverage a data-driven approach to design and improve production lines and manufacturing processes. Since manufacturing is the outcome that all other business functions have in common, you will collaborate widely across the organization with Supply Chain, Engineering, Quality, Planning, Production, Facilities, and others.

The right person for this role will demonstrate holistic ownership in solving operational challenges with creative solutions in a fast-paced, resource-limited environment. As a Senior level position, you will use your Industrial Engineering skills and expertise to triage and prioritize your projects, you will build plans to reach outcomes, and you will manage and recover your project execution with autonomy and independence while using proper judgement to escalate effectively when required.

WHAT YOU’LL DO

• Produce and maintain capacity models, balanced line layouts, and production ramp plans to define labor planning, capex requirements, workstation design, and throughput gaps
• Design effective facility layouts and production lines using CAD and simulation which meet process requirements, enable production targets, optimize resource allocation and material flow, and maximize productivity and quality, both for low rate and full rate production
• Identify and champion improvements to key causes of high variability or production bottlenecks, driving actions to resolution across disciplines and stakeholders
• Translate and drive action from metrics, KPIs, and reporting associated with monitoring production line health and efficiency, such as cycle time, throughput rate, capacity, utilization, and first pass yield
• Analyze manufacturing health to support decisions impacting Engineering (cut-in dates for new designs), Supply Chain (signals on what to buy), Manufacturing (signals on being clear-to-build and what to build), and Growth (supply overview to drive commitments to demand)
• Communicate effectively, using graphic and analytical tools, to support collaborative decisions and to report status with clarity and relevance
• Lead the design of production lines and workstations for both low-rate and full-rate production using techniques like Value Stream Mapping, Time Studies, and Line Balancing
• Mentorship responsibility to develop junior IEs/technicians as well as peers about IE
• Interfacing with vendors/suppliers for equipment specifications and RFQs
• Development and alignment of standards across sites at Anduril to enable scalability
• Close cross-functional collaboration with MFG Eng & MFG Ops

REQUIRED QUALIFICATIONS

• Bachelor’s degree or higher in industrial, mechanical, manufacturing, or aerospace engineering
• 5+ years past experience in a high-rate manufacturing environment where complex products were built with heavy data utilization
• Factory and/or production line design and set up - Value Stream mapping, Flow lines, continuous flow, one piece flow, workstation design, PFMEA
• Material Flow Systems - designing how material flows around a facility, pull systems, Kanban, min/max calculations, Part presentation to operator, Tote bin packaging, lineside racking
• Digital Systems - experience with Siemens "Plant Simulation", "Process Simulation" software to model a production line and run production scenarios (or equivalent)
• Demonstrated ability to completely own a value chain from start to finish, coordinating among multiple different internal and external parties to achieve on-time deliveries under stringent quality standards
• Experience with ERP, PLM, WMS and MES systems
• Experience with Lean Manufacturing principles/implementation
• Proficiency creating and interpreting drawings in composite and metallic aerospace parts and assemblies: GD&T, NDT methods and acceptance criteria, process specifications, assembly methods, common hardware

PREFERRED QUALIFICATIONS

• Prior work designing and/or setting up new production lines or factories - from process mapping through to collaborating with infrastructure design partners and detailed work station design
• Skilled at handling large data sets, including filtering, identifying trends, and graphical representation
• Knowledge of design engineering and manufacturing engineering processes including:
• 3D CAD design/modeling of parts and assemblies
• 3D factory layout
• Manufacturing process planning of fabricated parts, and complex discrete assembly process
• Manufacturing simulation of assembly processes, human ergonomics, and discrete event simulation
• Strong manufacturing data analytics and statistical analysis background with proficiency in statistical process control
• Experience in an aerospace composites manufacturing environment

ABOUT THE JOB

The Product Sourcing Engineer drives the strategic supply network development and cost management of Anduril’s product hardware across their lifecycles, by collaborating with suppliers and cross-functionally, including folks in engineering, quality, and manufacturing.

WHAT YOU'LL DO

• Conduct supplier selection for a specific product, leveraging our approved supplier list
• Partner with strategic suppliers to accelerate product development via activities such as:
• Concept scoping to quickly solidify requirements
• Feature trade-off / trade tables
• Should cost / Clean sheet models
• Joint design development, via clear statements of work
• Simulation of mechanical & electronics designs
• Drive the development and consolidation of a manufacturing BOM, working with Quality & Manufacturing, to ramp production internally and with our suppliers with high flexibility
• Manage the CAPEX throughout NPI
• Conduct value-stream mapping to optimize supply network lead time and flexibility
• Complete the BOM risk assessment, include alternate component sourcing, etc.
• Ensure completion of all component qualifications, ahead of production
• Reduce complexity: commonality optimization & component/supplier rationalization
• Lead all cost engineering activities to converge the bottoms-up cost curve to product cost, maximizing the total cost of ownership (TCO) across the product lifecycle
• Manage ad-hoc cost issues e.g., tariffs / import export cost, and cost inflation

REQUIRED QUALIFICATIONS

• Bachelor’s degree in engineering or other technical field
• 1+ years of experience in sourcing engineering, supplier engagement and development, or design of electronics and/or mechanical devices
• Domain expertise of value/procurement engineering or TCO-related work at the component & product level
• Ability to travel up to 25% of the time
• Ability to relocate, if not already local to be onsite in Morrisville, NC

PREFERRED QUALIFICATIONS

• Master's degree or advanced technical degree
• Deeper experience within:
• Design & development of electronics and/or mechanical devices
• Advanced sourcing activities, including stints as commodity/sourcing managers
• Supplier development (technology, process, supply chain, etc.)
• Early supplier engagement, ahead of product/engineering requirement realization
• Ideal candidate has worked in highly regulatory environment, preferably energetics and solid rocket motor (SRM) production
• Familiarity with developing high-tech products in a high-mix, low-volume environment
• Exposure to working in a fast-pace, start-up environment
• Ability to obtain and maintain a U.S. TS clearance

Principal Duties/Responsibilities:

· Extensive travel required. (Local, National, International)

· Promotes and adheres to the ATS safety culture.

· Engages in various work environments and industries to lead reliability centered maintenance efforts.

· Mentors, coaches, and provides reliability best practices for applications in customer facilities, by customer personnel

· Identifies top potential issues leading to lost production and preventable maintenance spending. Communicates findings with leadership.

· Provides solutions to root cause deficiencies and demonstrates economic benefits to their correction.

· Actively drives the implementation of equipment improvement projects.

· Identifies and implements current and new processes / technologies to increase equipment performance and uptime

· Champions systems and best practice procedures towards a proactive manufacturing culture.

· Analyzes equipment performance, failure data, and corrective maintenance history to develop and deploy engineering solutions, improved maintenance strategies, preventative maintenance optimization, and other reliability techniques.

· Provides technical service to operations and manufacturing personnel on equipment related troubleshooting efforts.

· Utilizes predictive, preventative, and precision maintenance technologies and strategies designed to identify or control risks prior to failure and ensure optimum maintenance execution.

· Collaborates with the maintenance team to prioritize assets and actions by determining failure probabilities and evaluating the risk of compliance, supply, strategy, and cost.

· Provides training and coaching in Root Cause and Reliability Analysis and takes ownership for ongoing corrective action tracking, implementation and follow up to ensure that all Root Cause Analysis projects are documented.

· Ensures compliance with regulatory requirements and ATS policies and procedures.

Knowledge, Skills, Abilities (KSAs), & Competencies:

Essential KSAs:

· Bachelor’s degree in engineering (ABET accredited)

· Eight or more years of reliability experience across 2 or more manufacturing sites

· Demonstrates ability to perform full array of reliability tool sets

· Strong technical understanding of electrical or mechanical components, tools, and designs

· Ability to complete a failure mode effects analysis, cause and effect diagrams, root cause failure analysis, life-cycle costing, and risk analysis

· Ability to research and apply new equipment technology / trends

· Robust problem solving, mathematical, analytical, and decision making skills

· Proficiency with computers, maintenance systems, and applications, including Microsoft Office

· Excellent verbal communication, facilitation, and presentation skills

· Strong reporting and technical writing capability

· Ability to build and maintain positive, professional relationships

Desirable KSAs:

· Desire to develop into a leadership role

· Experience with data trend analysis, vibration analysis, motor current analysis, oil analysis, lubrication and hydraulic testing, laser alignment, nondestructive testing, infrared thermography, ultrasound technology, acoustic reliability technology, Weibull analysis, and Six Sigma or Lean Manufacturing methodologies

· Knowledge of various government regulations such as, Current Good Manufacturing Practice (cGMP), National Electrical Testing Association (NETA), Environmental Protection Agency (EPA), and Occupational Safety and Health Administration (OSHA)

· CMRP certification

· Green Belt certification

· STS certification

Competencies:

· Drive & Motivation

· Interpersonal Skills

· Task Management

· Strategic Skills

· Customer Focus

· Self-awareness

· Management & Leadership

Physical Demands and Working Conditions:

While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors.

​

ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here.

What We Offer

• Competitive base salary with performance-based bonus potential

• 4 weeks of PTO

• Health, dental, and vision plans

• 401(k) retirement savings plan with employer match and planning resources

• Collaborative, team-based culture that fuels innovation

• Paid time off, holidays, and employee recognition programs celebrating your achievements

• Community engagement and STEM outreach opportunities to give back locally

Must Haves

• Bachelor of Science in Metrology or Engineering discipline
• Preferred 5 years of experience in metrology engineering and precision measurement.
• Excellent communication, planning, and independent problem-solving skills
• Proven ability to plan tests and analyze results
• Strong understanding of mechanical principles and design
• Advanced knowledge of data analysis software tools and techniques
• Experience with optical systems, image processing, or precision machine design preferred

What We Offer

• Competitive base salary with performance-based bonus potential
• 4 weeks of PTO for all new hires
• Health, dental, and vision insurance plans to support you and your family
• 401(k) retirement savings plan with employer match
• A collaborative, team-based culture focused on innovation and quality
• Paid holidays and employee recognition programs
• Opportunities to work with cutting-edge metrology tools and technologies
• STEM outreach and community engagement initiatives

Overview
The Research & Development Engineer drives the discovery, evaluation, and implementation of advanced technologies that strengthen US Conec’s core capabilities and support future product innovation. This role collaborates closely with manufacturing, metrology, and cross-functional engineering teams to assess new equipment, processes, and technical solutions that enhance operational excellence and competitive advantage.

Responsibilities
• Research and evaluate emerging technologies, equipment, and processes to support future product and manufacturing advancements
• Review technical publications, attend industry seminars and tradeshows, and engage with suppliers to identify innovative solutions
• Plan and coordinate equipment demonstrations and sample evaluations in collaboration with metrology and manufacturing teams
• Develop and execute structured test plans to assess feasibility, performance, and integration potential
• Perform hands-on machining and metrology activities to support development of new in-house capabilities
• Analyze experimental data using statistical tools and software; generate charts, graphs, and technical reports for internal stakeholders
• Document findings, prepare technical presentations, and provide data-driven recommendations for implementation
• Support the integration of validated technologies into production and engineering workflows

Must Haves
• Bachelor’s degree in Mechanical Engineering, Optics, or related technical discipline (Master’s degree preferred)
• Strong understanding of mechanical systems, precision machining, and metrology principles
• Experience planning experiments, executing tests, and analyzing results using statistical methods
• Advanced proficiency in Microsoft Excel and Minitab for data analysis and reporting
• Experience with technical documentation and presentation development in Microsoft Office (Excel, Word, PowerPoint)
• Programming experience in MATLAB, Python, or Visual Basic
• Excellent communication, organizational, and project planning skills

Nice to Haves
• Hands-on experience with multi-sensor CMM systems and metrology software
• Experience with confocal microscopy, CT scanning, SEM, or AFM equipment
• Familiarity with high-precision machining equipment and sub-micron measurement techniques
• Experience evaluating and implementing new manufacturing technologies

What We Offer

• Competitive base salary with performance-based bonus potential

• 4 weeks of PTO

• Health, dental, and vision plans

• 401(k) retirement savings plan with employer match and planning resources

• Collaborative, team-based culture that fuels innovation

• Paid time off, holidays, and employee recognition programs celebrating your achievements

• Community engagement and STEM outreach opportunities to give back locally

Senior Design/Development Engineer

Overview
At US Conec, we're proud to be a global leader in high-density fiber-optic connector solutions, with over 30 years of experience in precision engineering, injection molding, and plastics manufacturing. As a Senior Design/Development Engineer – Fiber Optic Connectors, you'll have the exciting opportunity to design and develop next-generation connector products, lead independent development projects, and mentor our talented technicians and engineers as we push the boundaries of optical performance together!

Responsibilities

• Design and develop fiber-optic connectors and their components using injection-molded parts, machined components, and 3D-printed prototypes.
• Plan, direct, and execute new product development and qualification projects, managing schedules, resources, and status reporting.
• Maintain project timelines and communicate progress through engaging meetings, informative reports, and dynamic presentations.
• Collaborate with our R&D technicians to conduct testing, data analysis, and thorough documentation.
• Analyze test results and technician feedback to iterate on design and process improvements.
• Coordinate with Product Management, Development, and Applications Engineering to deliver cost-effective solutions that truly meet our customer requirements.
• Provide valuable technical support to our Product Management, Sales, and Manufacturing teams on connector design, testing, and system performance.
• Maintain expertise in materials, injection-molding considerations, and industry processes.
• Develop and nurture strategic supplier relationships for new component and process development.
• Prepare conference papers or trade-journal articles on exciting new technologies and products.
• Maintain documentation for patent filings and act as the go-to technical resource for fiber, cable, connector, and hardware issues.
• Propose and champion innovative product ideas to expand US Conec’s connector portfolio.
• Use contact gauging equipment (calipers, micrometers), vision measurement systems, optical microscopes, and PC-based tools (MS Office) to validate and document designs.

Must Haves

• Bachelor’s degree in mechanical engineering or a related field.
• 10+ years of experience in a related engineering role, with 3–5 years in the fiber-optic or communications systems industry (co-op and internship experience counts!).
• Proven ability to work independently, lead projects, and mentor technicians and engineers.
• Excellent interpersonal, verbal, and written communication skills, with the ability to organize and convey complex ideas succinctly.
• Proficiency with CAD software and Finite Element Analysis (FEA).
• Familiarity with Geometric Dimensioning & Tolerancing (GD&T).
• Strong PC skills, including Microsoft Office.

Nice to Haves

• Hands-on experience with fiber-optic (or copper) assemblies, connectors, and testing.
• Understanding of statistical analysis methods.
• Exposure to patent preparation and technical publications.

What We Offer

• A competitive base salary with performance-based bonus potential.
• Four weeks of PTO, plus paid holidays and community/STEM outreach days.
• Health, dental, and vision plans.
• 401(k) retirement savings plan with employer match and planning resources.
• A collaborative, team-based culture that fuels innovation.
• Employee recognition programs celebrating your achievements.
• Career development opportunities and a supportive environment to grow your skills.

US Conec will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. 

Senior Controls Engineer

We’re seeking a full-time controls engineer to join our expanding team and contribute to the design, programming, and management of automation projects in the pharmaceutical and food & beverage industries. LAPORTE is a consulting engineering firm which has been in business for 25 years. Today, the company has 25 offices across North America and Europe, and over 480 employees with a passion for engineering.

Join us for a competitive salary, compensatory PTO, comprehensive benefits, and a supportive work environment that emphasizes professional growth. We believe in a flexible working environment that values work-life balance while encouraging efficiency and creativity on a daily basis.

The Controls Engineer will:

• Lead and support the design of automation projects, developing specifications for control panels, networks, and software (primarily Allen-Bradley PLC/PACs and Factorytalk View ME/SE HMI and SCADA).
• Translate process or packaging applications into detailed construction packages for control panel designs and electrical installation scopes. Construction packages typical include equipment arrangement drawings, schematics, wiring diagrams, cable schedules, control panel drawings, etc.
• Mentor and supervise project team members, enhancing team collaboration and project execution.
• Provide comprehensive lifecycle support for projects, including system design, troubleshooting, testing, and commissioning.
• Perform site surveys and offer hands-on support during installation, focusing on control system deployment.
• Adhere to and ensure compliance with relevant codes (UL508A, NEC) and standards.
• Engage in diverse projects, enhancing your engineering and project management skills.
• Travel expectations are dependent on specific project requirements by typically require 1-3 days for an initial site visit and then a return trip to lead commissioning efforts which may take 1-4 weeks. Overall travel is anticipated to be 20-40%.

Qualifications

• Bachelor’s degree in chemical engineering, Mechanical Engineering, Electrical Engineering, or Electrical Engineering Technology.
• 6+ years of experience in control systems, manufacturing, or consulting-design environments including experience commissioning systems, preferably as a lead.
• Proficient in automation project tasks including design, client coordination, and bid package preparation.
• Skilled in control panel and network design, instrument selection, and control system programming.
• Proficiency with AutoCAD for control panel design and electrical construction packages.
• Familiarity / Experience with electrical engineering construction packages – single line diagrams, panel schedules, power plans, etc.
• Hands-on experience surveying existing control installations and preparing as-built conditions of systems.
• Experience surveying and planning control systems projects without support of a manager.
• Hands-on experience with Rockwell Automation software—Studio 5000 / RSLogix 5000 for PLC programming and FactoryTalk View ME / SE for HMI and SCADA development.

Intermediate Controls Engineer - Hybrid - Raleigh, North Carolina

We’re seeking a full-time controls engineer to join our expanding team and contribute to the design, programming, and management of automation projects in the pharmaceutical and food & beverage industries. LAPORTE is a consulting engineering firm which has been in business for 25 years. Today, the company has 25 offices across North America and Europe, and over 480 employees with a passion for engineering.

Join us for a competitive salary, compensatory PTO, comprehensive benefits, and a supportive work environment that emphasizes professional growth. We believe in a flexible working environment that values work-life balance while encouraging efficiency and creativity on a daily basis.

The Controls Engineer will:

• Lead and support the design of automation projects, developing specifications for control panels, networks, and software (primarily Allen-Bradley PLC/PACs and Factorytalk View ME/SE HMI and SCADA).
• Translate process or packaging applications into detailed construction packages for control panel designs and electrical installation scopes. Construction packages typical include equipment arrangement drawings, schematics, wiring diagrams, cable schedules, control panel drawings, etc.
• Mentor and supervise project team members, enhancing team collaboration and project execution.
• Provide comprehensive lifecycle support for projects, including system design, troubleshooting, testing, and commissioning.
• Perform site surveys and offer hands-on support during installation, focusing on control system deployment.
• Adhere to and ensure compliance with relevant codes (UL508A, NEC) and standards.
• Engage in diverse projects, enhancing your engineering and project management skills.
• Travel expectations are dependent on specific project requirements by typically require 1-3 days for an initial site visit and then a return trip to lead commissioning efforts which may take 1-4 weeks. Overall travel is anticipated to be 20-40%.

Qualifications

• Bachelor’s degree in chemical engineering, Mechanical Engineering, Electrical Engineering, or Electrical Engineering Technology.
• 2-6 years of experience in control systems, manufacturing, or consulting-design environments including experience commissioning systems, preferably as a lead.
• Proficient in automation project tasks including design, client coordination, and bid package preparation.
• Skilled in control panel and network design, instrument selection, and control system programming.
• Proficiency with AutoCAD for control panel design and electrical construction packages.
• Familiarity / Experience with electrical engineering construction packages – single line diagrams, panel schedules, power plans, etc.
• Hands-on experience surveying existing control installations and preparing as-built conditions of systems.
• Experience surveying and planning control systems projects without support of a manager.
• Hands-on experience with Rockwell Automation software—Studio 5000 / RSLogix 5000 for PLC programming and FactoryTalk View ME / SE for HMI and SCADA development.

We are seeking an experienced Aircraft Exterior Lighting Engineer to lead the design, development, and validation of advanced exterior lighting systems for next-generation aircraft. This role will focus on delivering reliable, compliant, and high-performance lighting solutions across a range of platforms, including conventional and electric aircraft.

The ideal candidate has hands-on experience with aircraft lighting systems and a strong understanding of environmental, electrical, and regulatory considerations.

Key Responsibilities

Design and develop aircraft exterior lighting systems, including:

Navigation (position) lights

Anti-collision lighting

Landing and taxi lights

Recognition and logo lighting

Perform and document engineering analyses, including:

Electrical load and power consumption assessments

Thermal performance and heat dissipation analysis

Environmental durability (vibration, temperature extremes, moisture exposure)

Support system integration activities and ensure compatibility with aircraft electrical and structural systems

Collaborate with cross-functional teams including electrical, mechanical, and certification engineering

Ensure compliance with applicable regulatory and environmental standards

Support testing and qualification activities, including environmental and EMI/EMC validation

Contribute to design reviews, technical documentation, and continuous improvement efforts

Required Qualifications

Bachelor’s degree in Electrical Engineering, Aerospace Engineering, Mechanical Engineering, or related field

Direct experience designing or supporting aircraft exterior lighting systems

Familiarity with DO-160 environmental testing and qualification standards

Knowledge of EMI/EMC principles and their impact on aircraft systems

Experience performing electrical and thermal analyses

Strong understanding of aircraft electrical systems and integration considerations

Experience in eVTOL, UAV, or electric aircraft development programs

Familiarity with LED-based lighting technologies and control systems

Experience with simulation or analysis tools for thermal and electrical performance

Knowledge of certification requirements for exterior lighting systems

Experience working with suppliers and managing component development

Salary Range: $100,000-$125,000

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience 

Key Responsibilities

Develop aircraft-level verification test cases derived from system requirements and applicable regulatory standards

Ensure end-to-end traceability between requirements, verification methods, test cases, and results

Author, review, and maintain key verification artifacts, including:

Verification Plans
Test Procedures and Automated Test Scripts
Verification Reports and Compliance Documentation
Support the integration and execution of verification activities across multiple environments, including:
Ground testing (bench testing, iron bird, system integration labs)
Flight test verification programs
Collaborate with systems engineering, safety, and certification teams to ensure alignment with development and compliance objectives
Contribute to continuous improvement of verification processes, tools, and methodologies

Required Qualifications

Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, or related field
Experience with FAA certification processes (Part 23, Part 27, or similar)
Familiarity with ARP4754A and ARP4761 development and safety assessment processes
Exposure to DO-160 environmental testing standards
Experience supporting flight test programs and verification activities
Strong understanding of systems engineering principles, requirements validation, and verification methodologies
Experience with scripting or automation tools (e.g., Python, MATLAB, or similar)
Experience working in integrated test environments (iron bird, SIL/HIL systems)
Knowledge of requirements management and traceability tools (e.g., DOORS, Jama, Polarion)
Familiarity with data analysis and test automation frameworks
Strong technical writing and documentation skills

Salary Range: $100,000-$125,000

Position Responsibilities

• Engineer mechanical components and subassemblies for rotating machinery to satisfy customer specifications and targeted performance objectives, working under the guidance of a lead engineer
• Create detailed 3D CAD models and 2D engineering drawings, and perform supporting analyses such as tolerance accumulation, bearing load calculations, and preload assessments
• Ensure designs comply with company requirements and applicable industry standards, including GD&T and design-for-manufacturability principles
• Serve as a technical contributor in design, manufacturing, and test reviews by evaluating designs, identifying risks, and recommending corrective actions
• Execute assigned tasks in alignment with approved budgets and project schedules
• Review customer requirements and contribute to technical proposals, cost estimates, test plans, process qualification documents, bills of materials, schedules, and engineering reports as needed
• Proactively identify and resolve technical issues affecting current products or new development efforts
• Maintain clear, timely communication with peers and leadership regarding technical progress, challenges, and potential risks
• Assist with testing and validation activities for both new and existing products, with oversight from senior engineering staff
• Follow established safety practices and actively support continuous improvement of health, safety, and environmental initiatives
• Support occasional domestic and international travel (typically once per quarter)
• Be available for extended or off-hour work during peak project phases when required

Education and Experience

• Bachelor’s degree in Mechanical Engineering or a closely related discipline
• Minimum of four (4) years of experience in mechanical design within a product development and manufacturing environment

Technical Skills and Competencies

• Hands-on experience designing rotating machinery such as motors, generators, or similar systems
• Ability to create and interpret engineering drawings and specifications, including proper application of GD&T
• Sound engineering judgment across multiple mechanical disciplines
• Strong analytical and problem-solving capabilities
• Effective interpersonal and collaboration skills for working with cross-functional teams and customers
• Well-developed organizational, documentation, and reporting skills
• Proficiency in developing 3D CAD models and 2D drawings
• Working knowledge of Microsoft Office tools
• Familiarity with common shop and inspection tools, including measurement equipment

Preferred Qualifications

• Experience designing bearing systems and wound components
• Knowledge of rotor dynamics principles
• Familiarity with oil and air cooling approaches for rotating equipment
• Exposure to aerospace standards such as DO-160, ARP4754A, and ARP4761
• Experience using CATIA

Salary Range:$85,000-90,000

The actual salary offered is dependent on various factors including, but not limited to, location, the candidate’s combination of job-related knowledge, qualifications, skills, education, training, and experience