Location: Houston, TX or Reston, VA preferred / Remote considered / Hybrid office schedule and travel up to 50%.

Overview

Location: Houston preferred / Remote considered / Hybrid office schedule and travel up to 50%.

Overview

• Support the end-to-end engineering execution of BESS projects for data centers, from development to commissioning.Manage the technical scope of projects and serve as the technical point of contract to the project manager.
• Coordinate with internal engineering, procurement, and construction teams to ensure project milestones are met.
• Collaborate with customers, EPC contractors, OEMs, and design consultants on integration of BESS with data center electrical infrastructure.
• Review and validate system designs (electrical, civil, mechanical) and vendor submittals to ensure technical compliance and quality.
• Design and develop Single line diagrams, Schematics, Wiring diagrams for Battery storage systems
• Prepare Electrical Equipment Specifications, Data Sheets, Purchase Requisitions and Bid evaluations for inverters, Switchgear, Transformers and other electrical equipment as required
• Develop Short circuit, load flow, and arc flash studies using software such as ETAP.
• Assist in developing project schedules, procurement plans, and technical documentation.
• Conduct site walks and support field activities during installation and commissioning.
• Participate in Factory and Site Acceptance Testing (FAT/SAT) of BESS components and systems.
• Identify technical risks and propose mitigation strategies in coordination with Project Management.
• Ensure all work is compliant with relevant codes (e.g., NEC, IEEE, NFPA) and On Energy Storage’s internal standards.

• Experience working on EPC or design-build projects in the energy or critical infrastructure sector in North America.
• Familiarity with commissioning protocols and QA/QC procedures for electrical systems.
• PE or EIT certification is a plus.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for a Senior Manager, Regulatory Technical Authority position to join our team in Houston, Texas.  

This position will report the Director of Regulatory Compliance.

This position is located in our Downtown Houston office and is a Monday - Friday in-office position.

General Description:

The Senior Manager, Regulatory Technical Authority is responsible for being the subject matter expert in regulatory compliance for our Liquefied Natural Gas (LNG) Facilities for the Federal, State, and Local regulatory requirements. The Senior Manager, Regulatory Technical Authority must be competent in LNG Facility regulations including FERC, PHMSA, and the USCG. This position will report to the Director, Regulatory Compliance.

Responsibilities:

• Act as the regulatory compliance subject matter expert for the LNG facility management of change program to ensure compliance with appropriate regulations and Company Specifications.
• Support the development of scopes of work for LNG facility activities including Capital Projects, Maintenance, and Operations by validating specifications, required credentials and regulatory obligations are satisfied.
• Lead technical authority for Regulatory Compliance in 3D model reviews, HAZOPS, RCAs, and LOPAs.
• Lead technical authority for Regulatory Compliance in supporting engineering design, scope refinement, cost estimating, development of project design specifications, and support construction.
• Complete technical review of routine regulatory reports to validate accuracy with appropriate stakeholders.
• Develop Capital Project requests for compliance improvement opportunities.
• Manage regulation changes and the technical impacts thereof including developing proposed facility modifications to support said changes.
• Lead the development and implementation of technical training for regulatory compliance assurance.
• Responsible for managing Company Specifications, in coordination with Engineering, to ensure regulation citations are appropriately identified and updated, as required.
• Support the Regulatory Compliance Assurance program necessary for Federal, State, and Local audits.
• Performs internal compliance assurance activities in coordination with applicable stakeholders in preparation of routine Federal, State, and Local audits or inspections
• Identify potential areas of compliance vulnerability or risks and provide reports to Supervisor and other LNG business stakeholders.
• Work with Operations and Engineering SME’s to address areas of improvement identified from field assessments and/or changes to Venture Global processes and procedures.
• Support Operations and Engineering processes and procedures to ensure technical regulatory content is accurate and achievable.
• Support in safety related incident management issues on behalf of the Regulatory Department
• Support in executing external regulatory reporting obligations.
• Support the Company’s functional groups in planning, process and control management.
• Collaborate with LNG Operations and Construction personnel, engineering and other stakeholders to share lessons learned, experiences, and knowledge to ensure safe, reliable, and efficient operations.

Qualifications:

• Bachelor of Science degree in Engineering from an accredited university or 10+ years of experience in LNG facility engineering or regulatory support role
• Minimum of 10 years combined experience in design, commissioning, operations, or regulatory compliance
• Have the ability to read and interpret engineer drawings to include P&IDs, PFDs, C&Es, One Line Diagrams, Isometrics, and Civil/Structural drawings
• Must be proficient in LNG Facility Regulations including, but not limited to, 49 CFR 193, 33 CFR 127, NFPA 59A, and ASME B31.3.
• Broad knowledge of Codes, Standards, and Industry Best Practices.
• Must obtain a Transportation Worker Identification Credential (TWIC) card in good standing status.

Skills:

• Excellent research, written and oral communication skills.
• Strong logistics, time management, planning and scheduling skills required.
• An acute sensitivity to safety issues in a hazardous environment.
• Effective communicator at all levels of an organization with individuals and groups from different disciplines, industries and governmental agencies.
• Have advanced computer experience with Word, Excel, Access, and PowerPoint. Experience In Adobe Captivate, Articulate 360, or equivalent e-learning design software preferred.
• Ability to interface and effectively communicate with different groups, including operations staff, maintenance staff, engineering departments, human resources, regulators and other Company work groups.
• Ability to multi-task and function in a highly dynamic atmosphere.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

About the Role:

As the Sales/ Project Engineer for Ziplines Ground Systems and Site Infrastructure, you’ll spearhead the deployment success of Ziplines Offsite Charging sites, the game changing autonomous loading Zipping Point, and other site infrastructure. You’ll be handling all deployment topics, finding innovative solutions that work for partner sites, executing solutions to problems and roadblocks, and driving feedback and product changes to simplify and accelerate the rollout of Ziplines delivery infrastructure. This is a role well suited to technical engineers with great customer engagement skills - you’ll be crafting and designing solutions for new customers by listening to their feedback and needs, providing Zipline's fundamental perspectives and learnings and bringing all stakeholders along for the journey. As part of this you’ll engage in pre-contract discussions as the key technical stakeholder, the lead and manage those projects once signed from initial site evaluation through to construction and initial operation working across internal and external building and infrastructure teams, permitting and AHJ’s, installation teams and contractors, technical operations teams, and internal engineering and product teams.  You’ll work closely with the broader Engineering teams, Deployment and Construction team, Real Estate and Government Affairs,  Community Engagement and Legal teams teams to build strong relationships with key stakeholders and secure the necessary approvals to expand our network.

WHAT YOU’LL DO

• Work with customer teams and internal customer success teams to seamlessly integrate Zipline systems into both existing and newly designed infrastructure, including creating site layouts and related technical documents. Engage with partners’ internal teams to ensure alignment on expectations and timelines.
• Understand our internal and external customer’s business and needs and work with our internal engineering and business teams to refine and roadmap necessary product changes to ensure the successful deployment of the Ground Systems infrastructure. Maintain the high level customer specs and cut-sheets for the Zipline Systems. 
• Develop and lead pre-construction strategies to streamline entitlements and permits for Ziplines Ground System and Site Infrastructure projects. 
• Build and maintain strong relationships with Customer teams and technical staff, City Managers, staff, and City Council members and inspectors to facilitate smooth approvals and permit completion from Planning and Zoning commissions and AHJ’s. Collaborate closely with jurisdictions, land use counsel, Real estate team, and our Legal team to create pathways for deployments in evolving customer and regulatory landscapes.Source and foster relationships with external stakeholders, including local jurisdictions, utilities, and contractors.
• Understand and mitigate the preconstruction, construction, operational and sustaining  risks associated with each project. 
• Manage many parallel small construction projects, site infrastructure installments, construction contractors, and additional real estate development projects.
• Source and manage general contractors and subcontractors across various trades (construction, assembly, electrical) during bid, pre-construction, construction and site commissioning project phases. Evaluate all options and a lean budget, select best vendors to ensure reliable and quality services and products. Source and develop relationships with outside organizations (local jurisdiction, utilities, contractors, OEM and material suppliers etc).
• Develop and implement solutions to problems/projects/applications and associated systems from 0-1-100  across parallel projects and initiatives. 

WHAT YOU’LL BRING

• Bachelor’s degree in Engineering, Real Estate Development, Finance, Business Administration, Urban Planning, Architecture, Construction Management, or a related field 
• 4+  years of experience in a relevant field - technical sales of hardware products at scale, technical product management, real estate development or construction. Experience with technical sales and solution design of contractor installed equipment, and experience in the light commercial construction industry  is strongly preferred. 
• Proven ability to manage entitlements and permits for infrastructure projects in collaboration with internal and customers’ Real Estate and Construction teams. Familiarity with working alongside Authorities Having Jurisdiction (AHJs) to navigate permitting and inspection processes.
• Strong communication skills with the ability to align internal stakeholders on project requirements and provide leadership with regular updates on challenges, risks, and opportunities. Fluency in communicating ideas clearly, whether through quick sketches, sharp technical writing, or strategic presentations tailored to your audience.
• Experience working with External design teams (Architectural, Structural, Civil,Electrical MEPs) on commercial or industrial development  / construction projects. 
• Experience with CAD tools to develop site layouts, indicative construction designs and other technical drawings. 
• Based in the METRO region, with the flexibility to travel up to 20% domestically and internationally to support expansion projects.
• Must be eligible to work in the U.S.

What Else You Need To Know

Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws or our own sensibilities.

We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply! If you’d like to learn more about Zipline and our teams, feel free to check out our Instagram, one of our Reddit AMA’s, or our website!

About the Role

The Ground System Deployments team is looking for an innovative, collaborative and self-driven Civil Project Engineer to join the team to ensure the successful deployment of Zipline’s Ground Systems in all possible applications and configurations. 

This role is well suited to seasoned civil engineers looking to apply their experience designing novel and innovative sites, foundations and structures to advance and accelerate the new and growing industry of  autonomous drone delivery ground systems. 

With broad scope to influence the design of current and next generation systems this role will jopin a stellar team responsible for the site level designs, layouts, civil designs, structural and foundation designs and implementation. Interacting with various mechanical, structural and electrical engineering stakeholders across the organization this role will  ensure the overall system and its site design work hand in hand to ensure the successful deployment of Ziplines Ground Systems within cost and timeline goals. 

This role has a mandate to drive positive change through the organization - as problems or scenarios occur this individual will be tasked with both 0 to 1 problem/project responsibility and also working with the broad engineering and deployments organization to implement foundation changes to product and process as needed. 

This position can be based out of our San Francisco, Dallas or Houston Offices. Onsite is preferred, but this role can be remote flexible with up to 50% travel for the right candidate.

WHAT YOU’LL DO

• Act as the Civil Engineer of Record for Zipline projects in Texas and other jurisdictions
• Create, refine and update civil layouts for the sites. Act as the Zipline representative for any technical clarifications from cities or jurisdictions regarding our designs. 
• Contribute to the civil and site design standards of Zipline sites. 
• Contribute to the pavement, drainage, and sitescape designs and approaches of Zipline sites and structures. 
• Advise on permitting, codes and and other certification efforts relevant to the projects and structures.  
• Engage and interact with cities and relevant inspectors or relevant external parties to ensure timely project approvals and deployment. 
• Ensure relevant and applicable civil strategies are investigated and implemented where appropriate - grading designs, curb designs, pavement designs
• Understand our internal and external customer’s business and needs and work with our internal engineering and business teams to refine and roadmap necessary changes to ensure the successful deployment of the Ground Systems infrastructure. 
• Source and develop relationships with outside organizations (local jurisdiction, utilities, contractors, OEM and material suppliers etc).
• Evaluate all options and a lean budget, select best vendors to ensure reliable and quality services and products.
• Understand and mitigate the preconstruction, construction, operational and sustaining  risks associated with each project. 
• Interact directly with internal and external partners and stakeholders as needed. 
• Domestic travel to project sites expected on an ad-hoc basis. 

WHAT YOU’LL BRING

• Civil Professional Engineering qualification with stamping capacity in Texas (or the ability to quickly obtain stamping capacity in Texas). Ability to stamp in Arizona and other sunbelt states a strong preference, or the ability and capacity to quickly gain this qualification. 
• Bachelor's degree or higher  with minimum 6 years of experience.
• The individual should have an Engineering background (Civil, others acceptable with relevant experience and stamping capacity) and have worked in the construction, electrical design/EPC, or renewable energy industry, or equivalent industries for 4+ years. The individual should have experience (4yrs+) in working with:
  • Civil codes and building standards, and applicable design and management software.
  • Technical Product Management, Technical Program Management or applicable areas.
  • Systems engineering and  system architecture.
  • External design teams (Architectural, Structural, Civil,Electrical MEPs) on commercial or industrial development  / construction projects.
  • Experience with automated logistics, UAV aviation, EVSE Charging, Renewable Energy and Battery Energy Storage Systems or equivalent industries a plus. 

• Strong candidates should have excellent communications skills to:
  • Drive internal alignment of requirements for projects based on business needs.
  • Provide leadership team with updates on scope, schedule and budgets. 
  • Drive external parties for the implementation of real estate projects. 
• Must be eligible to work in the US.

What Else You Need To Know

Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws or our own sensibilities.

We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply!

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s three Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost 

We are seeking a Senior Mechanical Engineer - Static Equipment.

This position will be located at our Downtown Houston office and is a Monday-Friday position.

Responsibilities: 

• Mechanical MOC/HAZOP signoff
• Site mechanical technical authority
• VG engineering sign off on static equipment internal inspection / readiness
• Validation of pneumatic test packs and exclusion zone calculation
• Provides input to weekly site engineering report
• Review surveyor deliverables and assist with fit up / interface misses at site 

Qualifications: 

• Bachelor of Science degree in Mechanical Engineering
• Minimum of twelve years combined experience in Design, Commissioning, or Operations of Static Equipment. Experience representing asset owner in these roles is a plus.
• Experience in LNG liquefaction facilities highly preferred.
• Fire Equipment experience a must.
• Ability to perform multiple tasks and work within project deadlines, and adjust as priorities changes occur
• Possess the ability to mentor others through technical training and guidance on planning, scheduling, and engineering subjects
• Have the ability to read and interpret engineer drawings to include P&IDs, PFDs, C&Es, One Line Diagrams, Isometrics, and Civil/Structural drawings
• Knowledge of applicable ASME and API standards.
• Experience with systems completions.
• Strong understanding of the design and operation of heat exchangers and process piping.
• Exhibit excellent written and oral communication skills 

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a leader to join us as a Lead Engineer, Piping. The Lead Piping Engineer is responsible for analyzing and overseeing the design of piping systems ensuring that the systems are efficient, safe and meet all regulatory standards.

This position will be located in Houston, TX.  Travel may be required depending on project location. This is an in-office position Monday-Friday schedule.

Responsibilities:

Project Leadership:

• Responsible for the entire piping scope on assigned projects, including work done in overseas offices. 
• Responsible for all subsections of the piping discipline including, stress analysis, material specification, design and material take-off.
• Develop, oversee, and ensure adherence to project timelines, budgets, and deliverables.
• Track and report progress during project execution.
• Coordinate with project managers, engineers, and clients to clarify scope and objectives.

Piping Design and Engineering:

• Provide guidance on complex piping systems using best engineering practices.
• Review piping layouts, isometrics, and 3D models as well as the work performed by overseas offices.
• Ensure compliance with project specifications, standards, codes (ASME, API), and best practices.
• Conduct stress analysis, material selection, and pipe routing optimization.
• Provide procurement support for piping items (specialty items, pipe supports, valves, etc.).
• Ensure the check and release of various piping deliverables/documents for use by downstream parties.

Team Supervision:

• Conduct regular design reviews and ensure alignment across disciplines.
• Foster a collaborative and efficient team environment.

Coordination and Communication:

• Liaise with other engineering disciplines (civil, structural, mechanical, electrical, instrumentation, process safety) to ensure seamless integration of piping systems.
• Review and approve vendor drawings.
• Participate in design reviews, HAZOP studies, and project presentations.
• Address technical queries and manage design changes effectively.

Quality Assurance:

• Implement quality control measures and conduct regular design audits.
• Ensure deliverables meet project and regulatory standards.
• Address any issues or risks that could impact project delivery

Qualifications:

Education and Experience:

• Bachelor’s degree in Mechanical Engineering, or equivalent (preferred).
• Minimum 10-15 years of piping design experience using 2D/3D software. Good knowledge of Piping design of LNG projects.

Technical Skills:

• Proficiency in design review software like SmartPlant Review and Navisworks.
• Strong knowledge of piping codes and standards (ASME, ANSI, API, and PIP).
• Proficiency in material identification and selection.
• Strong knowledge of Cesar II and pipe stress analysis reports for all common systems of piping.
• Experience with LNG projects is preferred.
• Strong knowledge of AIV and FIV principles and screening is preferred
• Proficiency in development of piping material class specifications is preferred
• Strong knowledge in NDE and testing requirements of piping systems is preferred
• Proficiency in valve application and specification is preferred

Leadership and Communication:

• Proven ability to lead and mentor teams.
• Excellent communication, problem-solving, and decision-making skills.
• Strong organizational skills and ability to manage multiple priorities.

 Additional Skills:

• Familiarity with construction and installation practices.
• Understanding of project management principles.
• Experience with international projects and multicultural teams is a plus.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

Position Summary

We are seeking a Structural Engineer for detail engineering of fast paced modularised LNG project, with 5 – 7 years experience.

This position will be located on our downtown Houston office. This is a Monday-Friday role.

Job Knowledge

• Experience in Structural design of an assigned scope of work for an LNG onshore project. 
• Work involves independent design or directing technical work of vendors/contractors, applying standard design details per ACI, AISC, PIP, OSHA and or client safety standards, applicable codes and industry standards which form the basis of design. 
• Will assist or review the cost estimates and quantity take-offs for on-going projects, proposals, forecasts, and change-orders.
• Shall provide technical guidance to contractors/vendors.

Responsibilities

•  Review the work of engineers and designers developing engineering and design documents for Piling & Foundation and Module & Stick Built Steel Pipe Racks/Structures as needed for the project.
•  Reviewing, monitoring and ensuring compliance requirements are met for the design (e.g. Standards, specification and local codes and regulations etc.)
•  Regularly performs reviews of vendor documents to ensure specifications and data sheet requirements are met.
•  Develops and leads others in ways of improving the design and lowering cost.
•  Considers multiple solutions and makes good decisions based on good data analysis.
•  Manages several different assignments simultaneously.

Qualifications

• Bachelor’s degree in Civil/Structural Engineering minimum required.
• 5-7 years' minimum relevant experience in refining and petrochemical industry, LNG Project preferably with EPC experience.
• Licensed Professional Engineer with NCEES records preferred
• Travel < 25% expected.
• Self directs work with limited supervision.
• Provides guidance, leadership and training to less experienced engineers.
• Work with project team as representative and coordinates work within discipline department.
• Adjusts to varying demands of work and manage changes.
• Skill in oral and written communication
• Works collaboratively across departments and involves others in solving problems. Initiates meetings within own team, other disciplines or internal customers for clarity on work.
• Serves as technical resource and point of contact for external or internal customers.
• Should have experience in managing and responding to the RFIs from owner’s construction team, vendors,  EPC contractors.

Software Knowledge:

• STAAD Pro, Risa, STAAD Foundation, Mat 3D Foundation.3D MathCAD
• Navisworks, Microstation, AutoCAD

  Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. 

We are seeking Principal Engineer, Mechanical to join our team in Houston. This position is a Monday - Friday in-office. 

Responsibilities:

• Lead engineering design, scope refinement, cost estimating, development of project design specifications, and support construction
• Oversee project activities of third party project managers, engineers, construction managers, inspectors, and contractors
• Influence decisions that improve reliability and operability, reduce operating costs, and create a sustainable competitive advantage
• Translate project plans into coherent, credible, realistic project schedules
• Specifying equipment and major materials for procurement
• Providing in the field construction assistance
• Understand industry standards, applicable regulatory codes and requirements, and company standards
• Single point accountability for the technical execution and related aspects to achieve project objectives and business intent
• Ensure overall project technical quality and conformance to plan (scope, budget & schedule).
• Support Change Management functions, Value Improvement Practices, Bid Evaluations, Process and Implementation studies

Qualifications:

• Bachelor of Science degree in Engineering from an accredited university
• Minimum of twelve years combined experience in Design, Commissioning, or Operations of Cryogenic Processes
• Minimum of five years multi-discipline engineering management experience
• Experience in LNG liquefaction facilities highly preferred
• Ability to perform multiple tasks and work within project deadlines, and adjust as priorities changes occur
• Possess the ability to mentor others through technical training and guidance on planning, scheduling, and engineering subjects
• Have the ability to read and interpret engineer drawings to include P&IDs, PFDs, C&Es, One Line Diagrams, Isometrics, and Civil/Structural drawings
• Broad knowledge of Codes, Standards, and Industry Best Practices
• Exhibit excellent written and oral communication skills
• Have advanced computer experience with Microsoft Office, Microsoft Projects, PowerPoint, and Excel

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. 

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a leader to join us as a Senior Engineer, Piping. The Senior Piping Engineer is responsible for analyzing and overseeing the design of piping systems ensuring that the systems are efficient, safe and meet all regulatory standards. This position will be located in Houston, TX.  Travel may be required depending on project location. This is an in office position Monday-Friday schedule.

Responsibilities:

Project Leadership:

• Responsible for the entire piping scope on assigned projects, including work done in overseas offices. 
• Responsible for all subsections of the piping discipline including, stress analysis, material specification, design and material take-off.
• Develop, oversee, and ensure adherence to project timelines, budgets, and deliverables.
• Track and report progress during project execution.
• Coordinate with project managers, engineers, and clients to clarify scope and objectives.

Piping Design and Engineering:

• Provide guidance on complex piping systems using best engineering practices.
• Review piping layouts, isometrics, and 3D models as well as the work performed by overseas offices.
• Ensure compliance with project specifications, standards, codes (ASME, API), and best practices.
• Conduct stress analysis, material selection, and pipe routing optimization.
• Provide procurement support for piping items (specialty items, pipe supports, valves, etc.).
• Ensure the check and release of various piping deliverables/documents for use by downstream parties.

Team Supervision:

• Supervise, mentor and provide guidance to junior designers and drafters.
• Conduct regular design reviews and ensure alignment across disciplines.
• Foster a collaborative and efficient team environment.

Coordination and Communication:

• Liaise with other engineering disciplines (civil, structural, mechanical, electrical, instrumentation, process safety) to ensure seamless integration of piping systems.
• Review and approve vendor drawings.
• Participate in design reviews, HAZOP studies, and project presentations.
• Address technical queries and manage design changes effectively.

Quality Assurance:

• Implement quality control measures and conduct regular design audits.
• Ensure deliverables meet project and regulatory standards.
• Address any issues or risks that could impact project delivery

Qualifications:

Education and Experience:

• Bachelor’s degree in mechanical engineering (preferred).
• 10+ years of experience in piping layout, design and or engineering in the petrochemical industry, with at least 3 years in a leadership role.

Technical Skills:

• Proficiency in design review software like SmartPlant Review and Navisworks.
• Strong knowledge of piping codes and standards (ASME, ANSI, API, and PIP).
• Proficiency in material identification and selection.
• Strong knowledge of Cesar II and pipe stress analysis reports for all common systems of piping.
• Experience with LNG projects is preferred.
• Strong knowledge of AIV and FIV principles and screening is preferred
• Proficiency in development of piping material class specifications is preferred
• Strong knowledge in NDE and testing requirements of piping systems is preferred
• Proficiency in valve application and specification is preferred

Leadership and Communication:

• Proven ability to lead and mentor teams.
• Excellent communication, problem-solving, and decision-making skills.
• Strong organizational skills and ability to manage multiple priorities.

 Additional Skills:

• • Familiarity with construction and installation practices.
  • Understanding of project management principles.
  • Experience with international projects and multicultural teams is a plus.

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

Position Summary

We are seeking a Structural Senior Engineer for detail engineering of fast paced modularised LNG project, with 7 – 10 years experience.

This position will be located on our downtown Houston office. This is a Monday-Friday role.

Job Knowledge

• Experience in Structural design of an assigned scope of work for an LNG onshore project. 
• Work involves independent design or directing technical work of vendors/contractors, applying standard design details per ACI, AISC, PIP, OSHA and or client safety standards, applicable codes and industry standards which form the basis of design. 
• Will assist or review the cost estimates and quantity take-offs for on-going projects, proposals, forecasts, and change-orders.
• Shall provide technical guidance to contractors/vendors.

Responsibilities

•  Review the work of engineers and designers developing engineering and design documents for Piling & Foundation and Module & Stick Built Steel Pipe Racks/Structures as needed for the project.
•  Reviewing, monitoring and ensuring compliance requirements are met for the design (e.g. Standards, specification and local codes and regulations etc.)
•  Regularly performs reviews of vendor documents to ensure specifications and data sheet requirements are met.
•  Develops and leads others in ways of improving the design and lowering cost.
•  Considers multiple solutions and makes good decisions based on good data analysis.
•  Manages several different assignments simultaneously.

Qualifications

• Bachelor’s degree in Civil/Structural Engineering minimum required.
• 10-18 years' minimum relevant experience in refining and petrochemical industry, LNG Project, preferably with EPC experience and 7 ~ 10 years in lead position.
• Licensed Professional Engineer with NCEES records preferred
• Travel < 25% expected.
• Self directs work with limited supervision.
• Provides guidance, leadership and training to less experienced engineers.
• Work with project team as representative and coordinates work within discipline department.
• Adjusts to varying demands of work and manage changes.
• Skill in oral and written communication
• Works collaboratively across departments and involves others in solving problems. Initiates meetings within own team, other disciplines or internal customers for clarity on work.
• Serves as technical resource and point of contact for external or internal customers.
• Should have experience in managing and responding to the RFIs from owner’s construction team, vendors,  EPC contractors.

Software Knowledge:

• STAAD Pro, Risa, STAAD Foundation, Mat 3D Foundation.3D MathCAD
• Navisworks, Microstation, AutoCAD

  Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

Overview

What you will do:

What you will bring:

Salary Range: USD $120,800.00 - USD $144,960.00 /Yr.

Find out more about what Woolpert has to offer here:  http://woolpert.com/about-us/

Woolpert is an equal-opportunity employer. Woolpert is committed to the full inclusion of all individuals. We recruit, train, compensate, and promote regardless of race, religion, color, national origin, sex, disability, age, veteran status, and other protected status as required by applicable law.  You may view more about EEO on our website: Equal-Employment-Opportunity-The-Law.pdf and EEO is the Law Poster Supplement.

Applicants who require an accommodation throughout the application and interview process should request this in advance by contacting askhr@woolpert.com 

To all agencies: Please, no phone calls or emails to any employee of Woolpert or any of our subsidiaries about this requisition. All resumes submitted by search firms/employment agencies to any employee at Woolpert via email, the internet, or in any form and/or method will be deemed the sole property of Woolpert, unless such search firms/employment agencies were engaged by Woolpert's Talent Acquisition Team for this requisition and a valid agreement is in place. In the event a candidate who was submitted outside of Woolpert's applicant process is hired, no fee or payment of any kind will be paid.

What The Role Is

Reporting to the Manager of Project Engineering, the Project Engineer is responsible for managing the review, coordination, and approval of the detailed design package for Clearway Energy Group’s pipeline of solar and energy storage projects throughout the U.S. As part of the Engineering & Strategic Procurement department, the Project Engineer will also work with internal and external personnel to provide optimized designs, participate in the negotiation and execution of key contract exhibits, and support construction and commissioning activities by reviewing and approving commissioning test reports. The Project Engineer will work closely with Clearway Energy’s internal departments, including Origination, Development, Development Engineering, Construction, Procurement, Project Finance, and O&M; as well as with EPC contractors, Independent Engineers, financing parties, and other consultants, contractors, and stakeholders as needed.

This is a hybrid role based in one of our office locations in San Francisco, San Diego, Scottsdale, Houston, or Denver.

If you don’t meet 100% of the qualifications but see yourself contributing, please submit your resume.

What You'll Be Doing

• Technical lead and primary design and engineering point of contact for the Development and Construction teams, supporting intermediate- to advanced-stage development of utility-scale PV, PV+Storage, and stand-alone energy storage projects.
• Manage all resources, internally or externally, as necessary to obtain or review final site due diligence required to finalize scope, project costs, schedule, energy output, and risks with an independent EPC contractor or developer.
• Review engineering deliverables to ensure the final design meets contractual, cost, and performance requirements for our customers and financing partners.
• Develop, refine, or evaluate energy input assessments and power output expectations. Perform or oversee analyses to optimize site layouts, engineering design, and equipment selection to maximize performance and minimize lifecycle costs.
• Direct activities of designers, consultants, and contractors, and manage meetings and conference calls to achieve efficient use of resources, meet deadlines for deliverables, minimize delays, avoid crises, and resolve conflicts.
• Write, edit, and/or review technical scope of work documents, specifications, procedures, site reports, progress reports, feasibility studies, proposals, presentations, etc. Review and negotiate technical aspects of EPC contracts, interconnect agreements, etc.
• Coordinate with the Development team and external consultants to deliver energy resource predictions and production simulations, shading studies, electrical schematics, plant plans and equipment layouts, system cost estimates, EPC contracts, technical exhibits, etc.
• Review, manage, and maintain contractor deliverables during construction to meet critical contractual and financing milestones, including site, civil, structural, and electrical plans, permitting, and construction documents.
• Support construction as a technical escalation point and owner’s representative to mitigate delays and scope creep to maintain schedules and budgets.
• Represent Clearway (CEG) in interviews, meetings, and negotiations with clients, project developers, suppliers, consultants, utilities, and regulatory authorities.

What You'll Bring

• B.S. degree in mechanical, electrical, or civil engineering, or related subject.
• M.S. degree and/or P.E. desirable.
• Minimum 2+ years of solar/BESS industry experience, including 1+ year of direct EPC experience completing the detailed design, permitting, and construction of solar projects, and 1+ year of storage experience.
• Understanding solar and storage project design, optimization trade-offs, and familiarity with the current solar and storage market, equipment suppliers, contractors, typical technical specifications, and costs.
• Experience with solar and storage project financing and independent engineer requirements.
• Understanding of solar and storage energy estimates, losses, assumptions, and standards.
• Experience with review and negotiation of engineering, procurement, and construction contracts and technical exhibits for solar and storage facilities.
• Experience managing consultants and contractors.
• Working knowledge of relevant U.S. and IEC equipment standards, codes, and construction practices.
• Detail-oriented and self-motivated with the ability to perform in a dynamic and collaborative working environment.
• Ability and willingness to travel (~20%) and occasionally to work after hours on short notice, when necessary.
• Proven ability to organize and prioritize work, manage relationships with clients, colleagues, consultants, and contractors.
• Excellent written and verbal communication, mathematical abilities, analytical and creative design skills, and problem-solving skills; team-oriented with the ability to work alone when needed.

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Hybrid

What The Role Is

Reporting to the Manager of Project Engineering, the Project Engineer is responsible for managing the review, coordination, and approval of the detailed design package for Clearway Energy Group’s pipeline of solar and energy storage projects throughout the U.S. As part of the Engineering & Strategic Procurement department, the Project Engineer will also work with internal and external personnel to provide optimized designs, participate in the negotiation and execution of key contract exhibits, and support construction and commissioning activities by reviewing and approving commissioning test reports. The Project Engineer will work closely with Clearway Energy’s internal departments, including Origination, Development, Development Engineering, Construction, Procurement, Project Finance, and O&M; as well as with EPC contractors, Independent Engineers, financing parties, and other consultants, contractors, and stakeholders as needed.

This is a hybrid role based in one of our office locations in San Francisco, San Diego, Scottsdale, Houston, or Denver.

If you don’t meet 100% of the qualifications but see yourself contributing, please submit your resume.

What You'll Be Doing

• Technical lead and primary design and engineering point of contact for the Development and Construction teams, supporting intermediate- to advanced-stage development of utility-scale PV, PV+Storage, and stand-alone energy storage projects.
• Manage all resources, internally or externally, as necessary to obtain or review final site due diligence required to finalize scope, project costs, schedule, energy output, and risks with an independent EPC contractor or developer.
• Review engineering deliverables to ensure the final design meets contractual, cost, and performance requirements for our customers and financing partners.
• Develop, refine, or evaluate energy input assessments and power output expectations. Perform or oversee analyses to optimize site layouts, engineering design, and equipment selection to maximize performance and minimize lifecycle costs.
• Direct activities of designers, consultants, and contractors, and manage meetings and conference calls to achieve efficient use of resources, meet deadlines for deliverables, minimize delays, avoid crises, and resolve conflicts.
• Write, edit, and/or review technical scope of work documents, specifications, procedures, site reports, progress reports, feasibility studies, proposals, presentations, etc. Review and negotiate technical aspects of EPC contracts, interconnect agreements, etc.
• Coordinate with the Development team and external consultants to deliver energy resource predictions and production simulations, shading studies, electrical schematics, plant plans and equipment layouts, system cost estimates, EPC contracts, technical exhibits, etc.
• Review, manage, and maintain contractor deliverables during construction to meet critical contractual and financing milestones, including site, civil, structural, and electrical plans, permitting, and construction documents.
• Support construction as a technical escalation point and owner’s representative to mitigate delays and scope creep to maintain schedules and budgets.
• Represent Clearway (CEG) in interviews, meetings, and negotiations with clients, project developers, suppliers, consultants, utilities, and regulatory authorities.

What You'll Bring

• B.S. degree in mechanical, electrical, or civil engineering, or related subject.
• M.S. degree and/or P.E. desirable.
• Minimum 2+ years of solar/BESS industry experience, including 1+ year of direct EPC experience completing the detailed design, permitting, and construction of solar projects, and 1+ year of storage experience.
• Understanding solar and storage project design, optimization trade-offs, and familiarity with the current solar and storage market, equipment suppliers, contractors, typical technical specifications, and costs.
• Experience with solar and storage project financing and independent engineer requirements.
• Understanding of solar and storage energy estimates, losses, assumptions, and standards.
• Experience with review and negotiation of engineering, procurement, and construction contracts and technical exhibits for solar and storage facilities.
• Experience managing consultants and contractors.
• Working knowledge of relevant U.S. and IEC equipment standards, codes, and construction practices.
• Detail-oriented and self-motivated with the ability to perform in a dynamic and collaborative working environment.
• Ability and willingness to travel (~20%) and occasionally to work after hours on short notice, when necessary.
• Proven ability to organize and prioritize work, manage relationships with clients, colleagues, consultants, and contractors.
• Excellent written and verbal communication, mathematical abilities, analytical and creative design skills, and problem-solving skills; team-oriented with the ability to work alone when needed.

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Hybrid

What The Role Is

Reporting to the Manager of Project Engineering, the Project Engineer is responsible for managing the review, coordination, and approval of the detailed design package for Clearway Energy Group’s pipeline of solar and energy storage projects throughout the U.S. As part of the Engineering & Strategic Procurement department, the Project Engineer will also work with internal and external personnel to provide optimized designs, participate in the negotiation and execution of key contract exhibits, and support construction and commissioning activities by reviewing and approving commissioning test reports. The Project Engineer will work closely with Clearway Energy’s internal departments, including Origination, Development, Development Engineering, Construction, Procurement, Project Finance, and O&M; as well as with EPC contractors, Independent Engineers, financing parties, and other consultants, contractors, and stakeholders as needed.

This is a hybrid role based in one of our office locations in San Francisco, San Diego, Scottsdale, Houston, or Denver.

If you don’t meet 100% of the qualifications but see yourself contributing, please submit your resume.

What You'll Be Doing

• Technical lead and primary design and engineering point of contact for the Development and Construction teams, supporting intermediate- to advanced-stage development of utility-scale PV, PV+Storage, and stand-alone energy storage projects.
• Manage all resources, internally or externally, as necessary to obtain or review final site due diligence required to finalize scope, project costs, schedule, energy output, and risks with an independent EPC contractor or developer.
• Review engineering deliverables to ensure the final design meets contractual, cost, and performance requirements for our customers and financing partners.
• Develop, refine, or evaluate energy input assessments and power output expectations. Perform or oversee analyses to optimize site layouts, engineering design, and equipment selection to maximize performance and minimize lifecycle costs.
• Direct activities of designers, consultants, and contractors, and manage meetings and conference calls to achieve efficient use of resources, meet deadlines for deliverables, minimize delays, avoid crises, and resolve conflicts.
• Write, edit, and/or review technical scope of work documents, specifications, procedures, site reports, progress reports, feasibility studies, proposals, presentations, etc. Review and negotiate technical aspects of EPC contracts, interconnect agreements, etc.
• Coordinate with the Development team and external consultants to deliver energy resource predictions and production simulations, shading studies, electrical schematics, plant plans and equipment layouts, system cost estimates, EPC contracts, technical exhibits, etc.
• Review, manage, and maintain contractor deliverables during construction to meet critical contractual and financing milestones, including site, civil, structural, and electrical plans, permitting, and construction documents.
• Support construction as a technical escalation point and owner’s representative to mitigate delays and scope creep to maintain schedules and budgets.
• Represent Clearway (CEG) in interviews, meetings, and negotiations with clients, project developers, suppliers, consultants, utilities, and regulatory authorities.

What You'll Bring

• B.S. degree in mechanical, electrical, or civil engineering, or related subject.
• M.S. degree and/or P.E. desirable.
• Minimum 2+ years of solar/BESS industry experience, including 1+ year of direct EPC experience completing the detailed design, permitting, and construction of solar projects, and 1+ year of storage experience.
• Understanding solar and storage project design, optimization trade-offs, and familiarity with the current solar and storage market, equipment suppliers, contractors, typical technical specifications, and costs.
• Experience with solar and storage project financing and independent engineer requirements.
• Understanding of solar and storage energy estimates, losses, assumptions, and standards.
• Experience with review and negotiation of engineering, procurement, and construction contracts and technical exhibits for solar and storage facilities.
• Experience managing consultants and contractors.
• Working knowledge of relevant U.S. and IEC equipment standards, codes, and construction practices.
• Detail-oriented and self-motivated with the ability to perform in a dynamic and collaborative working environment.
• Ability and willingness to travel (~20%) and occasionally to work after hours on short notice, when necessary.
• Proven ability to organize and prioritize work, manage relationships with clients, colleagues, consultants, and contractors.
• Excellent written and verbal communication, mathematical abilities, analytical and creative design skills, and problem-solving skills; team-oriented with the ability to work alone when needed.

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Hybrid

What The Role Is

Reporting to the Manager of Project Engineering, the Project Engineer is responsible for managing the review, coordination, and approval of the detailed design package for Clearway Energy Group’s pipeline of solar and energy storage projects throughout the U.S. As part of the Engineering & Strategic Procurement department, the Project Engineer will also work with internal and external personnel to provide optimized designs, participate in the negotiation and execution of key contract exhibits, and support construction and commissioning activities by reviewing and approving commissioning test reports. The Project Engineer will work closely with Clearway Energy’s internal departments, including Origination, Development, Development Engineering, Construction, Procurement, Project Finance, and O&M; as well as with EPC contractors, Independent Engineers, financing parties, and other consultants, contractors, and stakeholders as needed.

This is a hybrid role based in one of our office locations in San Francisco, San Diego, Scottsdale, Houston, or Denver.

If you don’t meet 100% of the qualifications but see yourself contributing, please submit your resume.

What You'll Be Doing

• Technical lead and primary design and engineering point of contact for the Development and Construction teams, supporting intermediate- to advanced-stage development of utility-scale PV, PV+Storage, and stand-alone energy storage projects.
• Manage all resources, internally or externally, as necessary to obtain or review final site due diligence required to finalize scope, project costs, schedule, energy output, and risks with an independent EPC contractor or developer.
• Review engineering deliverables to ensure the final design meets contractual, cost, and performance requirements for our customers and financing partners.
• Develop, refine, or evaluate energy input assessments and power output expectations. Perform or oversee analyses to optimize site layouts, engineering design, and equipment selection to maximize performance and minimize lifecycle costs.
• Direct activities of designers, consultants, and contractors, and manage meetings and conference calls to achieve efficient use of resources, meet deadlines for deliverables, minimize delays, avoid crises, and resolve conflicts.
• Write, edit, and/or review technical scope of work documents, specifications, procedures, site reports, progress reports, feasibility studies, proposals, presentations, etc. Review and negotiate technical aspects of EPC contracts, interconnect agreements, etc.
• Coordinate with the Development team and external consultants to deliver energy resource predictions and production simulations, shading studies, electrical schematics, plant plans and equipment layouts, system cost estimates, EPC contracts, technical exhibits, etc.
• Review, manage, and maintain contractor deliverables during construction to meet critical contractual and financing milestones, including site, civil, structural, and electrical plans, permitting, and construction documents.
• Support construction as a technical escalation point and owner’s representative to mitigate delays and scope creep to maintain schedules and budgets.
• Represent Clearway (CEG) in interviews, meetings, and negotiations with clients, project developers, suppliers, consultants, utilities, and regulatory authorities.

What You'll Bring

• B.S. degree in mechanical, electrical, or civil engineering, or related subject.
• M.S. degree and/or P.E. desirable.
• Minimum 2+ years of solar/BESS industry experience, including 1+ year of direct EPC experience completing the detailed design, permitting, and construction of solar projects, and 1+ year of storage experience.
• Understanding solar and storage project design, optimization trade-offs, and familiarity with the current solar and storage market, equipment suppliers, contractors, typical technical specifications, and costs.
• Experience with solar and storage project financing and independent engineer requirements.
• Understanding of solar and storage energy estimates, losses, assumptions, and standards.
• Experience with review and negotiation of engineering, procurement, and construction contracts and technical exhibits for solar and storage facilities.
• Experience managing consultants and contractors.
• Working knowledge of relevant U.S. and IEC equipment standards, codes, and construction practices.
• Detail-oriented and self-motivated with the ability to perform in a dynamic and collaborative working environment.
• Ability and willingness to travel (~20%) and occasionally to work after hours on short notice, when necessary.
• Proven ability to organize and prioritize work, manage relationships with clients, colleagues, consultants, and contractors.
• Excellent written and verbal communication, mathematical abilities, analytical and creative design skills, and problem-solving skills; team-oriented with the ability to work alone when needed.

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Hybrid

What The Role Is

Reporting to the Manager of Project Engineering, the Project Engineer is responsible for managing the review, coordination, and approval of the detailed design package for Clearway Energy Group’s pipeline of solar and energy storage projects throughout the U.S. As part of the Engineering & Strategic Procurement department, the Project Engineer will also work with internal and external personnel to provide optimized designs, participate in the negotiation and execution of key contract exhibits, and support construction and commissioning activities by reviewing and approving commissioning test reports. The Project Engineer will work closely with Clearway Energy’s internal departments, including Origination, Development, Development Engineering, Construction, Procurement, Project Finance, and O&M; as well as with EPC contractors, Independent Engineers, financing parties, and other consultants, contractors, and stakeholders as needed.

This is a hybrid role based in one of our office locations in San Francisco, San Diego, Scottsdale, Houston, or Denver.

If you don’t meet 100% of the qualifications but see yourself contributing, please submit your resume.

What You'll Be Doing

• Technical lead and primary design and engineering point of contact for the Development and Construction teams, supporting intermediate- to advanced-stage development of utility-scale PV, PV+Storage, and stand-alone energy storage projects.
• Manage all resources, internally or externally, as necessary to obtain or review final site due diligence required to finalize scope, project costs, schedule, energy output, and risks with an independent EPC contractor or developer.
• Review engineering deliverables to ensure the final design meets contractual, cost, and performance requirements for our customers and financing partners.
• Develop, refine, or evaluate energy input assessments and power output expectations. Perform or oversee analyses to optimize site layouts, engineering design, and equipment selection to maximize performance and minimize lifecycle costs.
• Direct activities of designers, consultants, and contractors, and manage meetings and conference calls to achieve efficient use of resources, meet deadlines for deliverables, minimize delays, avoid crises, and resolve conflicts.
• Write, edit, and/or review technical scope of work documents, specifications, procedures, site reports, progress reports, feasibility studies, proposals, presentations, etc. Review and negotiate technical aspects of EPC contracts, interconnect agreements, etc.
• Coordinate with the Development team and external consultants to deliver energy resource predictions and production simulations, shading studies, electrical schematics, plant plans and equipment layouts, system cost estimates, EPC contracts, technical exhibits, etc.
• Review, manage, and maintain contractor deliverables during construction to meet critical contractual and financing milestones, including site, civil, structural, and electrical plans, permitting, and construction documents.
• Support construction as a technical escalation point and owner’s representative to mitigate delays and scope creep to maintain schedules and budgets.
• Represent Clearway (CEG) in interviews, meetings, and negotiations with clients, project developers, suppliers, consultants, utilities, and regulatory authorities.

What You'll Bring

• B.S. degree in mechanical, electrical, or civil engineering, or related subject.
• M.S. degree and/or P.E. desirable.
• Minimum 2+ years of solar/BESS industry experience, including 1+ year of direct EPC experience completing the detailed design, permitting, and construction of solar projects, and 1+ year of storage experience.
• Understanding solar and storage project design, optimization trade-offs, and familiarity with the current solar and storage market, equipment suppliers, contractors, typical technical specifications, and costs.
• Experience with solar and storage project financing and independent engineer requirements.
• Understanding of solar and storage energy estimates, losses, assumptions, and standards.
• Experience with review and negotiation of engineering, procurement, and construction contracts and technical exhibits for solar and storage facilities.
• Experience managing consultants and contractors.
• Working knowledge of relevant U.S. and IEC equipment standards, codes, and construction practices.
• Detail-oriented and self-motivated with the ability to perform in a dynamic and collaborative working environment.
• Ability and willingness to travel (~20%) and occasionally to work after hours on short notice, when necessary.
• Proven ability to organize and prioritize work, manage relationships with clients, colleagues, consultants, and contractors.
• Excellent written and verbal communication, mathematical abilities, analytical and creative design skills, and problem-solving skills; team-oriented with the ability to work alone when needed.

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Hybrid

Position Snapshot:
Atwell is seeking a PV & BESS Engineer to support the technical design and execution of utility-scale solar and BESS projects.

In this role, you will contribute to the engineering and design of Solar PV and Battery Energy Storage projects from early-stage feasibility through construction. You will work closely with Project Managers, senior technical leaders, EPC partners, and internal teams to develop high-quality design packages, support project execution, and help drive efficient, cost-effective solutions. This is a strong opportunity for an engineer who wants to continue growing technically within utility-scale renewables while gaining broader project exposure.

Responsibilities:
• Support the engineering design and modeling of utility-scale, ground-mounted Solar PV and BESS projects with a focus on performance, cost efficiency, and overall project success
• Prepare and review engineering drawings, site layouts, and electrical schematics using industry-standard tools such as AutoCAD, PVCase, and PVSyst to support interconnection, permitting, and feasibility efforts
• Coordinate with internal engineering teams, Project Managers, and external partners to keep projects moving efficiently through design milestones and deliverable deadlines
• Assist in the development of construction documents, ensuring technical accuracy, alignment with project requirements, and compliance with applicable codes and standards
• Support pre-construction and project execution activities by collaborating with permitting, procurement, development, and other cross-functional teams
• Contribute to technical reports, due diligence efforts, and feasibility assessments for both internal stakeholders and external clients
• Stay current on solar and BESS technologies, design practices, and regulatory requirements to help improve project execution and design consistency
• Provide guidance and technical support to junior engineers and designers while continuing to build depth in renewable energy project delivery

Qualifications:
• Bachelor’s degree in Electrical Engineering or a related field; PE license or progress toward licensure is preferred
• Minimum of 4–8 years of professional experience in Renewable Energy, with experience supporting utility-scale Solar PV and/or BESS projects
• Experience with energy storage and/or utility-scale solar design, including areas such as battery sizing, one-line development, site layout, inverter selection, cable ampacity calculations, grounding, protective relaying, and related systems design
• Proficiency with Solar PV modeling software and other relevant engineering tools
• Familiarity with utility-scale solar project design packages, including single-line diagrams, civil, structural, and electrical site plans, DC and AC wiring diagrams, and equipment layouts
• Understanding of practical solar power plant design applications, including PV string sizing, DC and AC conductor/conduit sizing, and racking/tracker layouts and power distribution
• Strong communication and coordination skills with the ability to work across multidisciplinary teams in a fast-paced project environment

Pay Scale - $90,000 - $135,000 base + benefits + bonus. 

Disclaimer 

While AI tools may support your application process, this role is built on human talent. Your judgment, experience, and character matter most, so we encourage you to showcase what makes you uniquely you.

Atwell does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any Atwell employee. Resumes from approved vendors must be specifically requested by Atwell and approved by the Atwell Talent Acquisition Team.

#LI-TK1

Project Manager – Power & Energy (Wind, Solar, Transmission & Substations)

Atwell’s Power & Energy group delivers utility-scale renewable and grid projects nationwide. We’re hiring a Technical Project Manager with a strong consulting/owner’s-engineer background to lead multidisciplinary work across wind, solar, battery storage, high-voltage substation, and transmission programs. This is a technical engineering PM role: you’ll own scope, schedule, and budget and drive the engineering from early studies and permits through construction support and closeout.

What you’ll do

• Own the project lifecycle: lead scope definition, proposals/LOE, schedules, risk registers, change management, and cost control from feasibility to turnover.
• Drive technical delivery: coordinate and review civil, structural, electrical (P&C, HV, collection, interconnection) and studies work; ensure designs meet NEC/NESC/IEEE/ASCE, client standards, and constructability.
• Quality & compliance: manage QA/QC plans, submittals, RFIs, and document control; ensure environmental/permitting and interconnection requirements are integrated.
• Construction support: perform site visits; review shop drawings and test reports; support FAT/SAT, energization, punch-list closure, and lessons-learned.
• Team & vendor management: coordinate internal engineers/designers and external partners (EPCs, specialty subs, equipment vendors) to align deliverables and mitigate risk.

What you bring

• 8+ years delivering power/energy projects (consulting, owner’s engineer, or EPCM) spanning utility-scale wind/solar/BESS, HV substations, and/or transmission.
• Bachelor’s in Electrical, Civil, or Structural Engineering (or related). PE license preferred (multi-state a plus); PMP a plus.
• Working knowledge of interconnection/studies and design coordination (e.g., ETAP/SKM/PSSE/PSCAD familiarity; PLS-CADD/POLE; Civil 3D/AutoCAD; Bluebeam).

Nice to have

• Experience with owner’s-rep/OR, OE roles and utility interfaces (ISO/RTO processes).
• Familiarity with constructability reviews, commissioning plans, and startup/energization.
• Knowledge of procurement workflows and major equipment (modules, trackers, inverters, transformers, breakers, relays).

Pay Range - $125,000 - $175,000 base + bonus.

Disclaimer 

While AI tools may support your application process, this role is built on human talent. Your judgment, experience, and character matter most, so we encourage you to showcase what makes you uniquely you.

Atwell does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any Atwell employee. Resumes from approved vendors must be specifically requested by Atwell and approved by the Atwell Talent Acquisition Team.

#LI-TK1

POSITION SNAPSHOT

Atwell is looking for a Project Engineer with energy experience. Current projects include oil & natural gas, CO2, hydrogen, and RNG pipelines and facilities. 

The Project Engineer will achieve business objectives by developing opportunities, executing project work, and acting as the lead SME technical expert within the group.  In this role, the selected candidate will be expected to develop and demonstrate proficiency regarding the essential functions of the job found below.

ESSENTIAL FUNCTIONS

• Direct project team on various assignments as directed by the lead Project Manager providing technical guidance
• Recommend and implement design changes per the client’s request
• Communicate with clients, regulatory agencies, or public as needed:
• Respond to project inquiries.
• Serve as liaison between clients and project team members.
• Ensure team performance and provide leadership to project teams:
• Supervise, advise, and assist assigned project team members.
• Foster teamwork within project teams and other teams within the firm.
• Maintain professional and technical knowledge
• Establish personal networks.
• Participate in applicable professional societies and trade associations.
• Achieve team performance objectives as well as individual objectives..
• Work closely with other Energy teams within Atwell to take advantage of expertise and share resources.
• Willing to travel when necessary

EDUCATION

• Bachelor’s degree from accredited university in Electrical, Mechanical, Petroleum or related field required
• Professional License (PE) required 

DAY TO DAY

• As the Senior Project Engineer, you will manage the Engineering activities related to design for major Oil & Gas / Energy projects (pipelines & facilities) throughout the US and serve as a main point of contact
• You provide engineering technical input into projects at various stages (from feasibility/ preliminary to detailed design), coordinate Engineering design efforts with EPC or external consultants to review and comment on design submittals in coordination with support from Atwell subject matter experts and manage and ensure all deliverables meet Project specifications
• Additionally, you manage external engineering firms, subcontractors as well as various engineering disciplines (civil, mechanical, structural, etc.) to achieve the highest level of engineering and design for project execution and actively identify all critical risks, issues and impacts of the project specifically the adequate application of and adherence to corporate health & safety and environmental requirements
• Review/monitor contractors’ progress and monitor the progress relating to key project milestones
• Internal coordination with Development, Engineering, Permitting, GIS and Land group
• Assist procurement in running RFPs and managing the process to sub-contractors
• Develop, review, and refine electrical and instrumentation (E&I) designs for natural gas transmission facilities, ensuring compliance with technical specifications, safety standards, and industry regulations
• Project sites may include mainline valve stations, metering and regulating stations, pipelines, and compressor stations
• Collaborate with project teams to define requirements and produce basis of design documents and comprehensive E&I scope packages

#LI-TK1

Position Snapshot: Civil/Structural Engineer – Oil & Gas

Atwell is seeking a licensed Civil/Structural Engineer (PE) with experience supporting structural design and engineering for the Oil and Gas industry. Our current project portfolio includes oil and natural gas, CO₂, hydrogen, and renewable natural gas (RNG) pipelines, terminals, compressor stations, and processing facilities.

In this role, you will be responsible for leading and executing civil and structural engineering efforts, ensuring alignment with project scope, schedule, budgets, client expectations, and applicable codes and standards. This position involves developing engineering documentation from concept through construction, overseeing structural analyses, mentoring junior team members, and coordinating across disciplines to support successful project execution.

You will play a critical role in the design of reinforced concrete foundations, structural steel platforms and supports, equipment skids, and pipeline structural systems.

Roles and Responsibilities:

• Lead the civil and structural engineering design for oil and gas infrastructure projects, including pipelines, pump stations, compressor stations, terminals, and process facilities
• Develop construction documents, including structural plans, general arrangements, framing plans, and connection details for steel and concrete structures
• Conduct structural analysis under various loading conditions including wind, seismic, blast, and equipment loads in accordance with applicable codes (IBC, ASCE, AISC, ACI, API, etc.)
• Review and approve engineering calculations, drawings, and reports prepared by internal teams and subcontractors
• Collaborate with multidiscipline teams including mechanical, piping, and electrical to coordinate structural requirements across project phases
• Perform field visits to verify as-built conditions, gather site data, and provide construction support as needed
• Provide mentorship to junior engineers and support team development through technical leadership
• Monitor project schedules, budgets, and resource allocations to ensure deliverables are met on time and within scope
• Support quality assurance by implementing Atwell’s QA/QC procedures and best practices

Job Requirements:

• Bachelor’s degree in Civil or Structural Engineering from an ABET-accredited institution (Master’s a plus)
• Professional Engineer (PE) license required
• 7+ years of experience in civil/structural engineering for oil and gas facilities or similar industrial infrastructure
• Proficient in structural analysis software such as STAAD.Pro, RISA, SAP2000, or similar
• Working knowledge of CAD software tools including AutoCAD, CADWorx, and Civil 3D
• Familiarity with Autodesk Inventor, Navisworks, or Tekla Structures is a plus
• Strong knowledge of applicable design codes: AISC, ACI, ASCE, API, IBC
• Proficient in Microsoft Office Suite (Word, Excel, Outlook)

Pay Range - $100,000 - $145,000 base + end of year bonus. 

Disclaimer 

While AI tools may support your application process, this role is built on human talent. Your judgment, experience, and character matter most, so we encourage you to showcase what makes you uniquely you.

Atwell does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any Atwell employee. Resumes from approved vendors must be specifically requested by Atwell and approved by the Atwell Talent Acquisition Team.

#LI-TK1

Atwell is seeking a Substation Engineer to join our growing Power & Energy team. We are a full-service consulting firm supporting the design and execution of power generation and power delivery systems across a broad range of markets, including utility-scale wind, solar, BESS, substations, transmission, and distribution infrastructure.

This role offers the opportunity to support impactful utility and renewable energy projects, work across multi-disciplinary teams, and contribute to both and/or substation physical design and protection & controls engineering.

What You’ll Do

• Support the design and engineering of high-voltage substations for utility, renewable, and power delivery projects
• Contribute to both physical substation design and Protection & Controls (P&C) engineering packages
• Lead or support engineering tasks from project kickoff through IFC/design package completion
• Coordinate closely with civil, structural, SCADA, relay, and project management teams to deliver integrated solutions
• Prepare technical deliverables including one-lines, three-lines, schematics, wiring diagrams, panel layouts, grounding plans, conduit/raceway layouts, cable schedules, bills of material, specifications, reports, and client-facing documents
• Provide engineering support during procurement, construction, commissioning, and startup phases
• Occasionally travel for field walkdowns, client meetings, factory acceptance testing, or construction support

Focus Areas

Physical Design

• Develop and support substation physical layout and design packages for high-voltage projects
• Prepare or review:
• General arrangement drawings
• Plan and elevation drawings
• Grounding layouts
• Conduit and cable routing plans
• Control building layouts
• Equipment connection details
• Foundation and equipment interface coordination
• Coordinate major equipment layouts including transformers, breakers, switches, bus systems, CCVTs/PTs, CTs, panels, batteries, and other station equipment
• Work closely with civil and structural teams to align grading, foundations, trenching, and equipment placement
• Support development of material lists, specifications, and installation details

Protection & Controls (P&C)

• Develop and support P&C design packages including:
• One-line and three-line diagrams
• AC/DC schematics
• Wiring diagrams
• Relay panel layouts
• Interconnection diagrams
• Communication diagrams
• SCADA point lists
• Perform engineering calculations such as battery sizing, voltage drop, conduit fill, and cable sizing
• Support relay setting development, protection philosophies, and coordination with OEMs and system stakeholders
• Contribute to arc flash, coordination, and other protection-related studies as applicable

What We’re Looking For

• Bachelor’s Degree in Electrical Engineering from an ABET-accredited program
• 5+ years of experience in substation engineering, power delivery, utility, or renewable energy projects
• Experience supporting physical design, Protection & Controls, or both within substation projects
• Strong understanding of high-voltage substation systems and design practices
• Experience developing engineering deliverables such as one-lines, schematics, wiring diagrams, layouts, grounding plans, and design packages
• Familiarity with applicable industry codes and standards including NEC, NESC, IEEE, ANSI, and NFPA
• Proficiency with tools such as AutoCAD, Bluebeam, and Microsoft Office

Preferred Qualifications

• Professional Engineer (PE) license, or ability to obtain
• Experience supporting utility-scale renewable energy projects, transmission, or high-voltage infrastructure
• Familiarity with relay coordination, SCADA integration, grounding design, and substation design standards
• Experience with ETAP, SKM, ASPEN, CYMCAP, or similar power system software is a plus

Pay Band - $100,000 - $155,000 base + bonus + benefits. 

Disclaimer 

While AI tools may support your application process, this role is built on human talent. Your judgment, experience, and character matter most, so we encourage you to showcase what makes you uniquely you.

Atwell does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any Atwell employee. Resumes from approved vendors must be specifically requested by Atwell and approved by the Atwell Talent Acquisition Team.

#LI-TK1

Synthesis Health

Who We Are

We’re a mission- and values-driven company with tremendous dedication to our customers. Our 100% remote team is dedicated to a common goal – to revolutionize healthcare through innovation, collaboration, and commitment to our core values and behaviors.

About the Opportunity

We are looking for a Principal Platform Engineer to serve as a hands-on architect of our system’s evolution. In this role, you will tackle our most substantial engineering challenges: ensuring the reliability, performance, and scalability of our distributed systems while driving the maturation of our technical stack.

This is a leadership role for a hands-on technical visionary. You will focus on solving deep, structural problems in the overall system to achieve 99.99% reliability and massive scalability. You will drive key maturation issues regarding our architecture, identifying the critical path for eliminating bottlenecks, reducing complexity, and enabling our engineering teams to ship faster with greater confidence. As a key voice on the Architecture Review Board (ARB), you will shape the technical direction of the entire organization.

If you are an expert in high-scale distributed systems and have the scars and success stories to prove it, this is your chance to build a legacy.

Key Responsibilities

System Reliability, Performance, & Scalability

• Solve Substantial System Challenges: You will identify and lead the resolution of the most complex, systemic problems affecting our platform's stability and speed.
• Architect for Scale: You will design the strategies that allow our system to handle exponential growth, focusing on database scaling, caching architectures, and asynchronous processing throughput.
• Reliability Engineering: You will define and drive the adoption of patterns that ensure system resilience, including circuit breaking, graceful degradation, and active-active failover strategies.

Stack & Architecture Maturation

• Drive Technical Evolution: You will lead the maturation of our technical stack, ensuring our libraries, frameworks, and infrastructure choices evolve to meet future business needs.
• Eliminate Structural Bottlenecks: You will look beyond code-level optimization to solve structural issues in our database layer, messaging infrastructure, and deployment pipeline.
• Technical Governance: As a senior leader on the ARB, you will enforce architectural rigor, preventing the introduction of new technical debt while establishing standards for long-term maintainability.

Strategic Leadership & Influence

• Cross-Organizational Impact: You will influence the technical direction across multiple product areas, reconciling conflicting architectural goals to serve the broader business.
• Elevate the Platform: You will mentor Staff and Senior engineers, helping them understand distributed consensus, eventual consistency, and the trade-offs of complex distributed systems.

What We’re Looking For

• Elite Distributed Systems Experience: 10+ years of software engineering experience, with a heavy focus on designing, optimizing, and operating high-scale distributed systems.
• Architectural Evolution: You have a proven track record of evolving complex systems and driving technical maturity in a fast-paced environment.
• Language Fluency & Strategy: Deep expertise in TypeScript/Node.js is required. As we pivot performance-critical paths toward Go, experience leading similar language transitions or strong Go proficiency is highly desirable.
• Deep Technical Mastery:
  • Expertise in defining Service Level Objectives (SLOs) and Error Budgets.
  • Deep knowledge of synchronous (Websockets, gRPC, REST) vs. asynchronous (Kafka/PubSub) communication patterns.
  • Advanced database design patterns (sharding, partitioning, CQRS).
  • Expertise in container orchestration (Kubernetes) at scale.
• Visionary Leadership: You can identify critical long-term technical challenges months or years in advance and mobilize the organization to address them.
• Communication at Scale: You can effectively communicate the business value of architectural investments to executive leadership while diving deep into the code with engineers.

Preferred Qualifications

• Healthcare Domain Experience: Experience in healhtech or regulated industries is a plus.
• Compliance & Standards: Deep familiarity with healthcare data standards (DICOM, HL7, FHIR) and compliance regulations (HIPAA) is a significant advantage.
• High-Performance Database Tuning: Deep experience tuning PostgreSQL or similar relational databases for massive concurrency.
• Breaking Up The Monolith: Experience migrating a monolithic database architecture to microservices is a plus.

Why You Should Join Us

• Solve Our Toughest Puzzles: This is a high-leverage role. You will be working on the most impactful technical challenges that are critical to the company's success.
• Define the Architecture: You won't just be maintaining a system; you will be a primary author of its future state, with the autonomy to make it happen.
• Lead from the Front: This is a chance to establish yourself as a key technical voice in a rapidly growing company.
• Competitive Compensation & Benefits: We offer a strong salary, meaningful equity, a 100% remote culture, and significant opportunities for growth.

We are a values-driven company. Our values:

• Clinical service first.
• Collaborate with our customers.
• Listen, respect, learn.
• Innovate to excel.

The behaviors we look for:

• Be nice.
• Be creative.
• Be honest.
• Be helpful.

Compensation and Benefits

Typical salary range for this position is $170,000 - $205,000. However, Synthesis participates in location based hiring and salary ranges can be adjusted based on candidate's residence. 

Other benefits include, but are not limited to: Medical, Dental, Vision, “Use as needed” vacation policy, and participation in our employee option program.

Synthesis Health is an Equal Employment/Affirmative Action employer. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by federal, state, or local law.

Synthesis Health

Who We Are

We’re a mission- and values-driven company with tremendous dedication to our customers. Our 100% remote team is dedicated to a common goal – to revolutionize healthcare through innovation, collaboration, and commitment to our core values and behaviors.

About the Opportunity

We are looking for a Principal Platform Engineer to serve as the key steward and architect of our medical data domain. In this role, you will own the integrity of our logical data model, ensuring that every service we build and every integration with customer systems preserves the accuracy and fidelity of our patient data.

Your primary focus will be on the interaction between our services and our data. You will define the patterns that allow our systems to interact with complex medical data structures in the most elegant, flexible, and performant way possible. You will act as the guardian of our domain model, ensuring that as we scale, we never compromise on data correctness or structural coherence.

This is a leadership role for a hands-on technical visionary. You will solve deep, structural problems regarding data consistency and interoperability. As a key voice on the Architecture Review Board (ARB), you will be the ultimate gatekeeper for decisions involving the data model, ensuring that our architecture evolves to support new clinical capabilities without accruing technical debt.

If you are an expert in healthcare data standards and modern cloud engineering, this is your chance to build a legacy.

Key Responsibilities

Medical Data Strategy & Domain Integrity

• Domain Model Stewardship & Service Interaction: You will define and enforce the integrity of our logical data model. You will architect the patterns for how all internal services and external integrations interact with this model, ensuring data accuracy and structural flexibility are preserved across the entire platform.
• High-Throughput Ingestion Architecture: You will architect and optimize our ingestion pipelines to handle massive bursts of DICOM images and HL7 messages without latency or data loss.
• Standards & Interoperability: You will lead the strategy for FHIR, HL7, and DICOM interoperability, ensuring our platform speaks the language of modern healthcare fluently.

Compliance & Security by Design

• Automate Compliance: You will design systems that enforce HIPAA, ISO 27001, and SOC2 requirements at the infrastructure and code level. You will build "compliance as code" to ensure audit readiness without manual toil.
• Data Governance: You will define the patterns for data residency, retention, and deletion, ensuring we meet strict legal and contractual obligations across global deployments.

Architectural Leadership & Influence

• Systemic Data Consistency: You will solve hard problems regarding distributed data consistency, helping us move away from tight coupling while ensuring data correctness across services.
• Elevate the Platform: You will be the subject matter expert (SME) for healthcare data within the engineering organization, mentoring Staff and Senior engineers on the nuances of medical data standards and distributed data patterns.

What We’re Looking For

• Deep Healthcare Data Expertise: 10+ years of engineering experience with a specific focus on healthcare data. You are an expert in DICOM (tags, transfer syntaxes, WADO/QIDO) and HL7/FHIR.
• Scale & Performance: Proven track record of building data pipelines that handle terabytes of medical imaging data. You understand the specific storage and retrieval challenges of pixel data vs. metadata.
• Language Fluency & Strategy: Deep expertise in TypeScript/Node.js is required. As we pivot performance-critical paths toward Go, experience leading similar language transitions or strong Go proficiency is highly desirable.
• Deep Technical Mastery:
  • Deep expertise in schema design for both SQL (PostgreSQL) and NoSQL environments.
  • Experience with data lakes and warehousing (BigQuery/Snowflake) in a healthcare context.
  • Experience with stream processing (Kafka/Dataflow) for real-time DICOM and HL7 feeds.
  • Expertise in container orchestration (Kubernetes) at scale.
• Compliance expertise: You have built systems that are HIPAA/GDPR compliant from the ground up and understand the technical implications of PHI (Protected Health Information) protection.
• Communication at Scale: You can effectively communicate the business value of architectural investments to executive leadership while diving deep into the code with engineers.

Preferred Qualifications

• Imaging Physics Knowledge: Understanding of the physics of medical imaging (CT, MRI, X-Ray) and how it impacts data storage and rendering.
• AI/ML Pipeline Experience: Experience architecting data flows that feed AI models for clinical decision support.
• PACS/VNA Architecture: Experience architecting or operating Picture Archiving and Communication Systems (PACS) or Vendor Neutral Archives (VNA).

Why You Should Join Us

• Solve Our Toughest Puzzles: This is a high-leverage role. You will be working on the most impactful technical challenges that are critical to the company's success.
• Define the Architecture: You won't just be maintaining a system; you will be a primary author of its future state, with the autonomy to make it happen.
• Lead from the Front: This is a chance to establish yourself as a key technical voice in a rapidly growing company.
• Competitive Compensation & Benefits: We offer a strong salary, meaningful equity, a 100% remote culture, and significant opportunities for growth.

We are a values-driven company. Our values:

• Clinical service first.
• Collaborate with our customers.
• Listen, respect, learn.
• Innovate to excel.

The behaviors we look for:

• Be nice.
• Be creative.
• Be honest.
• Be helpful.

Compensation and Benefits

Typical salary range for this position is $170,000 - $205,000. However, Synthesis participates in location based hiring and salary ranges can be adjusted based on candidate's residence.

Other benefits include, but are not limited to: Medical, Dental, Vision, “Use as needed” vacation policy, and participation in our employee option program.

Synthesis Health is an Equal Employment/Affirmative Action employer. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by federal, state, or local law.