ABOUT THE JOB

WHY WE'RE HERE: 

We are hiring V&V System Engineers to support production of a Group 5 autonomous aircraft. 

The systems engineering team is looking for V&V Systems Engineers for hardware verification and execution across the full product lifecycle - from design verification testing (DVT) through environmental qualification, production acceptance, and ground & flight test. This role is accountable for demonstrating that all hardware meets system level requirements and technical performance metrics (TPMs) before fielding, and for ensuring that verification activities are planned, executed, and documented in accordance with the program Systems Engineering Management Plan (SEMP).

REQUIRED QUALIFICATIONS

• Education:
  • B.S. in aerospace, mechanical, electrical or similar engineering or technical field
• Experience:
  • 3+ years of experience in systems engineering, hardware qualification, or test & evaluation in aerospace, defense, or similarly regulated industries
  • Direct experience supporting environmental qualification testing of electronic or electromechanical hardware (e.g., LRUs, avionics, actuators)
• Technical Knowledge:
  • Working knowledge of MIL-STD-810 (environmental test methods: vibration, shock, temperature, altitude, humidity, salt fog, sand & dust)
  • Familiarity with MIL-STD-461 (EMI/EMC: conducted/radiated emissions and susceptibility — CS101, CE102, RE102, RS103, CS114-CS118)
  • Familiarity with MIL-STD-464 (electromagnetic environmental effects: bonding, HERP, HERO, TEMPEST)
  • Understanding of MIL-STD-704 (aircraft electric power characteristics) as it applies to utilization equipment
  • Understanding of verification methods (Test, Analysis, Demonstration, Inspection) and when each is appropriate
  • Experience with requirements traceability — decomposing system-level requirements to component-level verification evidence
  • Ability to read and interpret qualification test reports, certificates of conformance, and supplier technical data packages
• Process & Methodology:
  • Experience with V&V planning: developing verification cross-reference matrices (VCRMs), test plans, and verification evidence packages
  • Understanding of Qualification by Similarity (QBS) methodology, including similarity assessments and gap analysis for COTS/MOTS hardware
  • Familiarity with the systems engineering V-model and how hardware qualification feeds into system-level acceptance
• Tools:
  • Proficiency with requirements management tools (e.g., Jama, DOORS, Polarion)
  • Proficiency with Microsoft Office (Excel for compliance matrices and data analysis, Word for test plans and reports, PowerPoint for technical reviews)
• Other:
  • U.S. citizenship required
  • Ability to obtain and maintain a U.S. security clearance

PREFERRED QUALIFICATIONS

• 5+ years in hardware qualification or environmental test engineering
• Experience with DO-160 (RTCA environmental test standard) and cross-referencing DO-160 results against MIL-STD-810/461 requirements
• Experience with MIL-HDBK-310 (global climatic data) and its application to operational environment definition
• Hands-on experience directing or witnessing environmental testing at a qualification test lab
• Experience with Foundry, Confluence, or similar platforms for tracking qualification status and engineering data
• Experience supporting airworthiness or safety-of-flight qualification programs
• Familiarity with AS9100 or equivalent quality management systems
• Prior work on UAS, tactical aircraft, or similar defense platforms
• Active Secret clearance or higher

ABOUT THE TEAM

Anduril's Space team is dedicated to expanding our AI-powered capabilities into the final frontier, enhancing Space Domain Awareness, Space Control, and Command and Control for U.S. military and allied partners. We're developing fully integrated hardware and software systems, including Lattice for Space Missions and modular payloads, to address growing threats in space and ensure our Guardians maintain a decisive advantage in this contested war-fighting domain.

ABOUT THE JOB

We are looking for a Signal Processing Engineer to join our rapidly growing team in Costa Mesa, CA. In this role, you will be responsible for developing discrimination algorithms that separate threats from non-threats, decoys, and debris using EO/IR sensor data for space and missile defense missions. You will design signal processing pipelines including detection, feature extraction, image processing, and develop advanced decision logic to enhance classification performance. This will require deep expertise in signal processing for EO/IR sensors, classification algorithms, detection theory, and proficiency in algorithm development. If you are someone who loves the challenge of extracting signal from noise, thrives on building algorithms that work in contested and degraded environments, and wants to see your work protecting forces against emerging threats in space, then this role is for you.

WHAT YOU’LL DO

• Develop discrimination algorithms for EO/IR sensors that classify and distinguish threats from decoys, debris, and clutter in real-time operational environments
• Design and implement signal processing pipelines including detection algorithms, feature extraction, image processing, and measurement generation from sensor data
• Develop and integrate advanced decision logic to enhance classification performance and adapt to evolving threat environments
• Analyze and optimize algorithms for EO/IR sensor phenomenology including noise characteristics, SNR considerations, resolution limits, and environmental effects
• Build physics-based models and conduct modeling and simulation including Monte Carlo analysis, recorded sensor playback, and hardware-in-the-loop testing to validate discrimination performance
• Develop analysis tools to characterize discrimination algorithm performance under challenging conditions such as countermeasures, clutter, and degraded sensing environments
• Collaborate with software engineers to transition discrimination algorithms from prototypes to production code optimized for operational deployment
• Engage with customers and stakeholders to understand mission needs, present discrimination solutions, and demonstrate system performance

REQUIRED QUALIFICATIONS

• Currently possesses and is able to maintain an active U.S. Secret security clearance
• Bachelor's degree or higher in Electrical Engineering, Computer Engineering, Aerospace Engineering, Applied Mathematics, Physics, Computer Science, or a related technical field
• 5+ years of experience designing, implementing, and testing signal processing algorithms for EO/IR sensors or similar sensing modalities in aerospace or defense systems
• Strong understanding of EO/IR sensor phenomenology including noise characteristics, detection theory, SNR analysis, resolution limits, and environmental effects
• Experience with signal processing techniques including detection algorithms, filtering, and measurement generation from sensor data
• Proficiency in algorithm development and coding with demonstrated experience transitioning algorithms to production environments
• Experience with modeling, simulation, and testing workflows including physics-based modeling, Monte Carlo analysis, or hardware-in-the-loop environments
• Ability to work collaboratively with software engineers, systems engineers, and test teams to integrate algorithms into operational systems

PREFERRED QUALIFICATIONS

• Advanced degree (MS or PhD) in Engineering, Physics, Applied Mathematics, or related technical field
• Experience with space or missile defense systems, threat discrimination, or intercept systems
• Experience developing advanced decision logic or adaptive algorithms for classification workflows
• Demonstrated experience with pattern recognition, computer vision, or image processing for defense applications
• Experience handling discrimination challenges including countermeasures, spoofing, and contested/degraded sensing environments
• Background in fire control systems, guidance/navigation/control (GNC) integration, or kill vehicle systems
• Experience with radar systems, RF signal processing, or multi-modal sensor fusion
• Demonstrated experience working within systems engineering processes including requirements management, trade studies, and verification/validation
• Experience with MBSE tools (Cameo, Rhapsody, DOORS) or systems engineering toolchains

ABOUT THE TEAM

Anduril's Space team is dedicated to expanding our AI-powered capabilities into the final frontier, enhancing Space Domain Awareness, Space Control, and Command and Control for U.S. military and allied partners. We're developing fully integrated hardware and software systems, including Lattice for Space Missions and modular payloads, to address growing threats in space and ensure our Guardians maintain a decisive advantage in this contested war-fighting domain.

ABOUT THE JOB

We are looking for a Senior Signal Processing Engineer to join our rapidly growing team in Costa Mesa, CA. In this role, you will be responsible for leading the development discrimination algorithms that separate threats from non-threats, decoys, and debris using EO/IR sensor data for space and missile defense missions. You will design signal processing pipelines including detection, feature extraction, image processing, and develop advanced decision logic to enhance classification performance. This will require deep expertise in signal processing for EO/IR sensors, classification algorithms, detection theory, and proficiency in algorithm development. If you are someone who loves the challenge of extracting signal from noise, thrives on building algorithms that work in contested and degraded environments, and wants to see your work protecting forces against emerging threats in space, then this role is for you.

WHAT YOU’LL DO

• Lead the development of discrimination algorithms for EO/IR sensors that classify and distinguish threats from decoys, debris, and clutter in real-time operational environments
• Design and implement signal processing pipelines including detection algorithms, feature extraction, image processing, and measurement generation from sensor data
• Develop and integrate advanced decision logic to enhance classification performance and adapt to evolving threat environments
• Analyze and optimize algorithms for EO/IR sensor phenomenology including noise characteristics, SNR considerations, resolution limits, and environmental effects
• Build physics-based models and conduct modeling and simulation including Monte Carlo analysis, recorded sensor playback, and hardware-in-the-loop testing to validate discrimination performance
• Develop analysis tools to characterize discrimination algorithm performance under challenging conditions such as countermeasures, clutter, and degraded sensing environments
• Collaborate with software engineers to transition discrimination algorithms from prototypes to production code optimized for operational deployment
• Mentor engineers and provide technical leadership on signal processing approaches and best practices
• Engage with customers and stakeholders to understand mission needs, present discrimination solutions, and demonstrate system performance

REQUIRED QUALIFICATIONS

• Currently possesses and is able to maintain an active U.S. Secret security clearance
• Bachelor's degree or higher in Electrical Engineering, Computer Engineering, Aerospace Engineering, Applied Mathematics, Physics, Computer Science, or a related technical field
• 8+ years of experience designing, implementing, and testing signal processing algorithms for EO/IR sensors or similar sensing modalities in aerospace or defense systems
• Proven expertise in EO/IR sensor phenomenology including noise characteristics, detection theory, SNR analysis, resolution limits, and environmental effects
• Strong proficiency with signal processing techniques including detection algorithms, filtering, and measurement generation from sensor data
• Proficiency in algorithm development and coding with demonstrated experience transitioning algorithms to production environments
• Experience with modeling, simulation, and testing workflows including physics-based modeling, Monte Carlo analysis, or hardware-in-the-loop environments
• Demonstrated technical leadership experience with ability to mentor engineers and drive technical direction
• Ability to work collaboratively with software engineers, systems engineers, and test teams to integrate algorithms into operational systems

PREFERRED QUALIFICATIONS

• Advanced degree (MS or PhD) in Engineering, Physics, Applied Mathematics, or related technical field
• Experience with space or missile defense systems, threat discrimination, or intercept systems
• Proven expertise developing advanced decision logic or adaptive algorithms for classification workflows
• Demonstrated experience with pattern recognition, computer vision, or image processing for defense applications
• Experience handling discrimination challenges including countermeasures, spoofing, and contested/degraded sensing environments
• Background in fire control systems, guidance/navigation/control (GNC) integration, or kill vehicle systems
• Experience with radar systems, RF signal processing, or multi-modal sensor fusion
• Demonstrated experience working within systems engineering processes including requirements management, trade studies, and verification/validation
• Experience with MBSE tools (Cameo, Rhapsody, DOORS) or systems engineering toolchains

ABOUT THE TEAM

Anduril's Space team is dedicated to expanding our AI-powered capabilities into the final frontier, enhancing Space Domain Awareness, Space Control, and Command and Control for U.S. military and allied partners. We're developing fully integrated hardware and software systems, including Lattice for Space Missions and modular payloads, to address growing threats in space and ensure our Guardians maintain a decisive advantage in this contested warfighting domain.

ABOUT THE JOB

We are looking for a Senior Launch Service Mission Manager to join our rapidly growing team in Costa Mesa, CA. In this role, you will be responsible for owning the interface between the spacecraft and launch providers for all of Anduril’s spacecraft. You will be responsible for the coordination of all deliverables to the launch provider and act as the primary point of contact for all things launch to Anduril’s spacecraft customers. The Launch Integration team will work closely with related teams, such as the mechanical and structural spacecraft design, systems engineer, electrical design, program management, spacecraft mission operations, etc. to ensure requirements satisfaction across all launch platforms including commercial rideshare, national security space launch.

This role is tied to ongoing, funded programs within Anduril’s Space Business Line. The programs require building and fielding a resilient, software-defined spacecraft systems across numerous mission threads. We work with mission partners and customers to deploy reliable and robust capabilities on operationally-relevant fielding timelines to meet complex challenges across the DOD and IC.

WHAT YOU’LL DO

• Own the launch integration plans and procedures for various spacecraft programs launching to all orbital regimes
• Provide all deliverables to the launch providers to enable launch integrations at various payload processing facilities
• Collaborate across multiple teams to plan, build, and test complex functionality
• Triage issues, root cause failures, and coordinate next steps
• Coordinate with launch providers, customers, and internal spacecraft engineering teams to turn ensure satisfaction of all launch provider requirements for spacecraft and payloads
• Support challenging schedules during ground testing, launch windows and on-orbit operations of the spacecraft systems
• Work with other teams and government agencies to achieve the required licenses (FCC, NOAA, etc) and comply with regulations for launching spacecraft

REQUIRED QUALIFICATIONS

• Strong engineering background from industry or school, ideally in areas/fields such as Mechanical Engineering, Aerospace Engineering, or other engineering degree
• 3+ years of professional launch experience
• Experience conducting launch integration operations with an emphasis on safety and reliability
• Ability to quickly understand and navigate complex systems and detailed requirements
• Capable of solving complex technical problems with little oversight
• Clear communication and organizational skills including documentation and training material
• Currently possesses and is able to maintain an active U.S. Secret security clearance
• Willingness to support launch-related travel as needed

PREFERRED REQUIREMENTS 

• Experience with coding or automating functions to improve efficiency and delivery to customers and launch providers
• A desire to work on critical spacecraft systems in support of the US government and our allies
• Experience working with launch vehicles, spacecraft and other systems
• Experience supporting spacecraft environmental test campaigns
• Experience designing and integrating mechanical and electrical ground support equipment for spacecraft environmental test campaigns and launch integration campaigns
• Currently possesses and is able to maintain an active U.S. Top Secret security clearance

ABOUT THE TEAM

Anduril's Space team is dedicated to expanding our AI-powered capabilities into the final frontier, enhancing Space Domain Awareness, Space Control, and Command and Control for U.S. military and allied partners. We're developing fully integrated hardware and software systems, including Lattice for Space Missions and modular payloads, to address growing threats in space and ensure our Guardians maintain a decisive advantage in this contested war-fighting domain.

ABOUT THE JOB

As a RF Communications Engineer for our Space team, you will contribute to the design of all satellite communications subsystem to include but not limited to bus TT&C, mission data links and inter-satellite links. You will be responsible for possessing deep knowledge on RF and optical systems to include link budget ownership, subsystem design and the integration of NSA approved Type 1 encryption. You will be responsible for authoring space to ground ICD’s and become familiar with Anduril’s ground software enterprise and orbital flight software systems. The Spacecraft Comms team will work closely with related teams, such as the spacecraft design, ground, and flight software, etc., to help improve both the ground and satellite-based capabilities but above all else will be responsible for the successful design, test and operations of the various communications links onboard Anduril’s fleet of spacecraft

This role is directly tied to ongoing, funded programs within Anduril’s Space Business Line. The programs require building and fielding a resilient, software-defined spacecraft systems across numerous mission threads. We work with mission partners and customers to deploy reliable and robust capabilities on operationally-relevant fielding timelines to meet complex challenges across the DOD and IC.

WHAT YOU’LL DO

• Contribute to the spacecraft communications subsystems for various spacecraft programs in all orbital regimes
• Integrate with legacy systems to unlock 21st-century capabilities.
• Develop modern, software-defined approaches to autonomous spacecraft communications leveraging proliferated constellations of ground and space-based assets
• Own space-to-ground and space-to-space ICDs and designs for communication subsystems
• Collaborate across multiple teams to plan, build, and test complex functionality
• Coordinate with end-users, other operators and customers to turn needs into features while balancing user experience with engineering constraints
• Support challenging schedules during ground testing, launch windows and on-orbit operations of the spacecraft systems

REQUIRED QUALIFICATIONS

• Strong engineering background from industry or school, ideally in areas/fields such as Electrical Engineering, RF Engineering, Computer Science, or other engineering degree
• Experience conducting spacecraft operations and satellite command and control with an emphasis on system reliability and uptime
• Flexible and agile problem solving skills
• Working knowledge of and experience with MATLAB
• Ability to quickly understand and navigate complex systems and detailed requirements
• Experience with RF subsystem design for space-space and space-ground in multiple orbital regimes
• Experience with optical inter-satellite and optical space-ground systems
• Capable of solving complex technical problems with little oversight
• Clear communication and organizational skills including creating documentation and training materials
• Currently possesses and is able to maintain an active U.S. Top Secret security clearance

PREFERRED QUALIFICATIONS

• Experience with Python, Go, C++ and/or Linux systems
• A desire to work on critical software and hardware designs in the space domain
• Experience testing comms subsystems in laboratory environments that mimic the space environmental constraints
• Experience with testing/validation leveraging FlatSats, Hardware-in-the-Loop testbeds and digital spacecraft simulators through nominal and fault scenarios
• Exposure to ground station operations and providers
• Exposure to US satellite operations policy and constraints for relevant mission threads in all orbits

ABOUT THE TEAM

Anduril's Space team is dedicated to expanding our AI-powered capabilities into the final frontier, enhancing Space Domain Awareness, Space Control, and Command and Control for U.S. military and allied partners. We're developing fully integrated hardware and software systems, including Lattice for Space Missions and modular payloads, to address growing threats in space and ensure our Guardians maintain a decisive advantage in this contested warfighting domain.

ABOUT THE JOB 

We are looking for a Computer Vision Engineer to join our rapidly growing team in Costa Mesa, CA. In this role, you will be responsible for working on and understand the design of all perception subsystems to include but not limited to hardware sensors and advanced processing platforms, navigation algorithms, flight software implementation, subsystem integration & test (I&T), and vehicle I&T. The computer vision engineering team will work closely with related teams, including Sensors, GNC, Avionics, Systems, Flight Software, Mission Operations, and Ground Software. The Computer Vision Engineer will work algorithm design, truth and physics modeling, scene rendering, simulation and analysis for a wide variety of spacecraft and space missions to include but not limited to LEO, MEO, GEO, Reentry, and RPOD (Rendezvous Proximity Operations and Docking). The CV Engineer will help lead successful implementation, validation and CV operations of Anduril’s fleet of space vehicles.  This role is directly tied to ongoing, funded programs within Anduril’s Space Business Line. The programs require building and fielding a resilient, software-defined spacecraft systems across numerous mission threads. We work with mission partners and customers to deploy reliable and robust capabilities on operationally-relevant fielding timelines to meet complex challenges across the DOD and IC.

WHAT YOU’LL DO

• Propose and prototype innovative solutions to solve real world problems, leveraging the latest state-of-the-art techniques in the field
• Develop and maintain core libraries and runtime applications
• Integrate classical and geometric methods in computer vision with ML methods
• Work space vehicle CV software and hardware subsystems for various spacecraft efforts in all orbital regimes and work closely with partners for successful implementation
• Develop modern, software-defined approaches to autonomous spacecraft operations with maneuvering capabilities to successfully accomplish mission objectives
• Develop appropriate test plans and procedures to validate the CV system during ground checkout, on-orbit commissioning and operations
• Collaborate across multiple teams to plan, build, and test complex functionality
• Coordinate with end-users, other operators and customers to turn needs into features while balancing user experience with engineering constraints
• Support challenging schedules during ground testing, launch windows and on-orbit operations of the spacecraft systems
• Design of flight software and firmware, algorithms, and simulation products
• Development of space vehicle autonomy tools for dynamic space operations
• Test process development and execution
• Define automated fault detection and responses
• Provide hardware-in-the-loop and monte-carlo simulation capabilities

REQUIRED QUALIFICATIONS

• MS or PhD in Machine Learning, Robotics or Computer Science, Image Science with emphasis on Computer Vision
• BS in Computer Science, Machine Learning, Electrical Engineering, or related field
• Advanced professional experience developing and benchmarking ML algorithms on large-scale datasets
• High proficiency in C++ development in a Linux environment
• Experience in one or more of the following: Objection Detection, Object Tracking, Instance Segmentation, Semantic Segmentation, Semantic Change Detection, Natural Feature Tracking (NFT)
• Experience in one or more of the following: Visual Odometry, SLAM, Multi-view Geometry, Structure from Motion, 3D Geometry, Discriminative Correlation Filters, Stereo, Neural 3D Reconstruction, Multi-band sensor processing, RGB-D and LIDAR Sensor Fusion
• Ability to quickly understand and navigate complex systems and detailed requirements
• Familiarity with terminal guidance, rendezvous proximity operations and docking, orbital mechanics with propulsive spacecraft, and/or spacecraft/missile GNC
• Clear communication and organizational skills including documentation and training material
• Currently possesses and is able to maintain an active U.S. Top Secret security clearance

PREFERRED QUALIFICATIONS

• Experience with Matlab, Simulink, Python, Go, C++ and/or Linux systems
• A desire to work on critical software and hardware designs in the space domain
• Strong preference for candidates possessing computer vision, vision navigation, image processing, feature tracking, SLAM, Open CV, and NFT
• Experience testing CV subsystems in laboratory environments that mimic the space environmental constraints
• Experience with orbital mechanics and resident space object tracking capabilities
• Experience conducting spacecraft operations and satellite command and control with an emphasis on system reliability and uptime
• Experience with testing/validation leveraging FlatSats, Hardware-in-the-Loop testbeds and digital spacecraft simulators through nominal and fault scenarios
• Experience with computer vision and perception algorithms to support GNC operations
• Experience developing 3-DOF simplified and 6-DOF high-fidelity dynamics simulation models used for GNC systems analysis and validation
• Exposure to US satellite operations policy and constraints for relevant mission threads in all orbits

ABOUT THE TEAM

Anduril's Space team is dedicated to expanding our AI-powered capabilities into the final frontier, enhancing Space Domain Awareness, Space Control, and Command and Control for U.S. military and allied partners. We're developing fully integrated hardware and software systems, including Lattice for Space Missions and modular payloads, to address growing threats in space and ensure our Guardians maintain a decisive advantage in this contested warfighting domain.

ABOUT THE JOB 

We are looking for a Senior Computer Vision Engineer to join our rapidly growing team in Costa Mesa, CA. In this role, you will be responsible for working on and understand the design of all perception subsystems to include but not limited to hardware sensors and advanced processing platforms, navigation algorithms, flight software implementation, subsystem integration & test (I&T), and vehicle I&T. The computer vision engineering team will work closely with related teams, including Sensors, GNC, Avionics, Systems, Flight Software, Mission Operations, and Ground Software. The Computer Vision Engineer will work algorithm design, truth and physics modeling, scene rendering, simulation and analysis for a wide variety of spacecraft and space missions to include but not limited to LEO, MEO, GEO, Reentry, and RPOD (Rendezvous Proximity Operations and Docking). The CV Engineer will help lead successful implementation, validation and CV operations of Anduril’s fleet of space vehicles.  This role is directly tied to ongoing, funded programs within Anduril’s Space Business Line. The programs require building and fielding a resilient, software-defined spacecraft systems across numerous mission threads. We work with mission partners and customers to deploy reliable and robust capabilities on operationally-relevant fielding timelines to meet complex challenges across the DOD and IC.

WHAT YOU’LL DO

• Propose and prototype innovative solutions to solve real world problems, leveraging the latest state-of-the-art techniques in the field
• Develop and maintain core libraries and runtime applications
• Integrate classical and geometric methods in computer vision with ML methods
• Work space vehicle CV software and hardware subsystems for various spacecraft efforts in all orbital regimes and work closely with partners for successful implementation
• Develop modern, software-defined approaches to autonomous spacecraft operations with maneuvering capabilities to successfully accomplish mission objectives
• Develop appropriate test plans and procedures to validate the CV system during ground checkout, on-orbit commissioning and operations
• Collaborate across multiple teams to plan, build, and test complex functionality
• Coordinate with end-users, other operators and customers to turn needs into features while balancing user experience with engineering constraints
• Support challenging schedules during ground testing, launch windows and on-orbit operations of the spacecraft systems
• Design of flight software and firmware, algorithms, and simulation products
• Development of space vehicle autonomy tools for dynamic space operations
• Test process development and execution
• Define automated fault detection and responses
• Provide hardware-in-the-loop and monte-carlo simulation capabilities

REQUIRED QUALIFICATIONS

• MS or PhD in Machine Learning, Robotics or Computer Science, Image Science with emphasis on Computer Vision
• BS in Computer Science, Machine Learning, Electrical Engineering, or related field
• Advanced professional experience developing and benchmarking ML algorithms on large-scale datasets
• High proficiency in C++ development in a Linux environment
• Experience in one or more of the following: Objection Detection, Object Tracking, Instance Segmentation, Semantic Segmentation, Semantic Change Detection, Natural Feature Tracking (NFT)
• Experience in one or more of the following: Visual Odometry, SLAM, Multi-view Geometry, Structure from Motion, 3D Geometry, Discriminative Correlation Filters, Stereo, Neural 3D Reconstruction, Multi-band sensor processing, RGB-D and LIDAR Sensor Fusion
• Ability to quickly understand and navigate complex systems and detailed requirements
• Familiarity with terminal guidance, rendezvous proximity operations and docking, orbital mechanics with propulsive spacecraft, and/or spacecraft/missile GNC
• Clear communication and organizational skills including documentation and training material
• Currently possesses and is able to maintain an active U.S. Top Secret security clearance

PREFERRED QUALIFICATIONS

• Experience with Matlab, Simulink, Python, Go, C++ and/or Linux systems
• A desire to work on critical software and hardware designs in the space domain
• Strong preference for candidates possessing computer vision, vision navigation, image processing, feature tracking, SLAM, Open CV, and NFT
• Experience testing CV subsystems in laboratory environments that mimic the space environmental constraints
• Experience with orbital mechanics and resident space object tracking capabilities
• Experience conducting spacecraft operations and satellite command and control with an emphasis on system reliability and uptime
• Experience with testing/validation leveraging FlatSats, Hardware-in-the-Loop testbeds and digital spacecraft simulators through nominal and fault scenarios
• Experience with computer vision and perception algorithms to support GNC operations
• Experience developing 3-DOF simplified and 6-DOF high-fidelity dynamics simulation models used for GNC systems analysis and validation
• Exposure to US satellite operations policy and constraints for relevant mission threads in all orbits

ABOUT THE TEAM

The Sentry Tower Software team is responsible for developing robotic systems that provide force protection capabilities, monitoring the perimeter of secure areas, land or sea, for approaching people, vehicles, and vessels. We live in a world where security officers are increasingly overwhelmed by sensor data feeds. Our products leverage advanced sensor fusion and autonomy to seamlessly render activity in the environment to Lattice's common operating picture.

Our Product:
https://www.anduril.com/sentry

ABOUT THE JOB

We are looking for a Senior Robotics Software Engineer to join our rapidly growing team in Irvine. In this role, you will be responsible for building and maintaining software for current and next-generation Sentry Tower systems. This will include interacting with stakeholders such as Anduril's business lines of Air Defense and Counter Intrusion all the way from internal engineering customers to the people in the field and prioritizing what is important to create an excellent experience for them in the long run. If you are someone who is driven to built great robots, then this role is for you.

WHAT YOU'LL DO

• Own the software development and integration for Pan-Tilt Unit (PTU) control systems, including motion control algorithms, hardware interface layers, and sensor feedback loops.
• Develop and maintain software services that bridge the gap between hardware and high-level control systems, ensuring precise and reliable movement of camera payloads and sensor packages.
• Collaborate with mechanical and electrical engineers to integrate PTU hardware into Sentry Tower systems, participating in design reviews and contributing to future PTU product concepts.
• Design and implement automated test frameworks to validate PTU performance, including motion accuracy, load handling, and environmental durability.
• Be responsible for service ownership of PTU control software, ensuring functionality, reliability, and alignment with product requirements.
• Submit well-documented, tested pull requests that advance PTU capabilities and address critical issues.

REQUIRED QUALIFICATIONS

• Eligible to obtain and maintain an active U.S. Secret security clearance.
• Proficiency in the full robotics system stack, from integrating sensor technology to robotic movement actuation.
• 6+ years working with C++.
• Ability to closely collaborate with engineers from various non-software engineering disciplines.
• Strong engineering background from industry or school, ideally in fields such as Engineering, Computer Science, Mathematics, or Physics.

PREFERRED QUALIFICATIONS

• Experience using Python to develop tests and tooling.
• Experience working with motor control, low-level communications (CAN, UART, SPI, etc.), and real-time systems.
• Experience working with robotics middleware such as ROS/ROS2.
• Experience working with Linux-based systems such as Ubuntu, Yocto, and NixOS.

ABOUT THE TEAM

Anduril's Space team is dedicated to expanding our AI-powered capabilities into the final frontier, enhancing Space Domain Awareness, Space Control, and Command and Control for U.S. military and allied partners. We're developing fully integrated hardware and software systems, including Lattice for Space Missions and modular payloads, to address growing threats in space and ensure our Guardians maintain a decisive advantage in this contested warfighting domain.

ABOUT THE JOB

As a GNC (Guidance, Navigation & Control) Engineer for our Space team, you will work on and understand the design of all satellite GNC subsystems to include but not limited to hardware sensors and actuators, orbit mechanics, navigation algorithms, flight software implementation, subsystem integration & test (I&T), and vehicle I&T. The GNC engineering team will work closely with related teams, including Systems, Flight Software, Mission Operations, and Ground Software. The GNC Engineer will work algorithm design, truth and physics modeling, simulation and analysis for a wide variety of spacecraft and space missions to include but not limited to LEO, MEO, GEO, Reentry, and RPOD (Rendezvous Proximity Operations and Docking). The Sr. GNC Engineer will help lead successful implementation, validation and GNC operations of Anduril’s fleet of spacecraft.

This role is directly tied to ongoing, funded programs within Anduril’s Space Business Line. The programs require building and fielding a resilient, software-defined spacecraft systems across numerous mission threads. We work with mission partners and customers to deploy reliable and robust capabilities on operationally-relevant fielding timelines to meet complex challenges across the DOD and IC.

WHAT YOU’LL DO

• Work spacecraft GNC software and hardware subsystems for various spacecraft efforts in all orbital regimes and work closely with bus providers for successful implementation
• Develop modern, software-defined approaches to autonomous spacecraft operations with maneuvering capabilities to successfully accomplish mission objectives
• Develop appropriate test plans and procedures to validate the GNC system during ground checkout, on-orbit commissioning and operations
• Collaborate across multiple teams to plan, build, and test complex functionality.
• Coordinate with end-users, other operators and customers to turn needs into features while balancing user experience with engineering constraints.
• Support challenging schedules during ground testing, launch windows and on-orbit operations of the spacecraft systems.
• Design of flight software, algorithms, and simulation products.
• Development of spacecraft autonomy tools for dynamic space operations
• Test process development and execution.
• Define automated fault detection and responses.
• Provide hardware-in-the-loop and monte-carlo simulation capabilities.

REQUIRED QUALIFICATIONS

• Strong engineering background from industry or school, ideally in areas/fields such as Aerospace Engineering, Dynamics and Controls Engineering, Computer Science, or other engineering degree. 
• Experience with MATLAB, Simulink, Python, C++, Go, and/or Linux Systems. 
• Ability to quickly understand and navigate complex systems and detailed requirements.
• Experience with orbital mechanics and resident space object tracking capabilities
• Familiarity with rendezvous proximity operations and docking, orbital mechanics with propulsive spacecraft, and/or spacecraft attitude determination and controls
• Strong knowledge of spacecraft dynamics, orbital mechanics, and control theory.
• Clear communication and organizational skills including documentation and training material.
• Must be eligible to obtain and maintain an active U.S. Top Secret security clearance.

PREFERRED QUALIFICATIONS

• Experience with MATLAB, Simulink, Python, Go, C++ and/or Linux systems.
• A desire to work on critical software and hardware designs in the space domain.
• Experience testing propulsion subsystems in laboratory environments that mimic the space environmental constraints.
• Experience conducting spacecraft operations and satellite command and control with an emphasis on system reliability and uptime.
• Experience with testing/validation leveraging FlatSats, Hardware-in-the-Loop testbeds and digital spacecraft simulators through nominal and fault scenarios.
• Experience with computer vision and perception algorithms to support GNC operations.
• Experience developing 3-DOF simplified and 6-DOF high-fidelity dynamics simulation models used for GNC systems analysis and validation.
• Exposure to US satellite operations policy and constraints for relevant mission threads in all orbits.

ABOUT THE TEAM

Anduril's Space team is dedicated to expanding our AI-powered capabilities into the final frontier, enhancing Space Domain Awareness, Space Control, and Command and Control for U.S. military and allied partners. We're developing fully integrated hardware and software systems, including Lattice for Space Missions and modular payloads, to address growing threats in space and ensure our Guardians maintain a decisive advantage in this contested warfighting domain.

ABOUT THE JOB

As a Sr. GNC (Guidance, Navigation & Control) Engineer for our Space team, you own the understanding and design of all satellite GNC subsystems to include but not limited to hardware sensors and actuators, orbit mechanics, navigation algorithms, flight software implementation, subsystem integration & test (I&T), and vehicle I&T. The GNC engineering team will work closely with related teams, including Systems, Flight Software, Mission Operations, and Ground Software. The Sr. GNC Engineer will lead algorithm design, truth and physics modeling, simulation and analysis for a wide variety of spacecraft and space missions to include but not limited to LEO, MEO, GEO, Reentry, and RPOD (Rendezvous Proximity Operations and Docking). The Sr. GNC Engineer will help lead successful implementation, validation and GNC operations of Anduril’s fleet of spacecraft.

This role is directly tied to ongoing, funded programs within Anduril’s Space Business Line. The programs require building and fielding a resilient, software-defined spacecraft systems across numerous mission threads. We work with mission partners and customers to deploy reliable and robust capabilities on operationally-relevant fielding timelines to meet complex challenges across the DOD and IC.

WHAT YOU’LL DO

• Lead spacecraft GNC software and hardware subsystems for various spacecraft efforts in all orbital regimes and work closely with bus providers for successful implementation.
• Develop modern, software-defined approaches to autonomous spacecraft operations with maneuvering capabilities to successfully accomplish mission objectives.
• Develop appropriate test plans and procedures to validate the GNC system during ground checkout, on-orbit commissioning and operations.
• Collaborate across multiple teams to plan, build, and test complex functionality.
• Coordinate with end-users, other operators and customers to turn needs into features while balancing user experience with engineering constraints.
• Support challenging schedules during ground testing, launch windows and on-orbit operations of the spacecraft systems.
• Directly interact with customers to ensure mission success.
• Design of flight software, algorithms, and simulation products.
• Development of spacecraft autonomy tools for dynamic space operations
• Test process development and execution.
• Define automated fault detection and responses.
• Provide hardware-in-the-loop and monte-carlo simulation capabilities.

REQUIRED QUALIFICATIONS

• Strong engineering background from industry or school, ideally in areas/fields such as Astrodynamics, Aerospace Engineering, Dynamics and Controls Engineering, Computer Science, or other engineering degree.
• Experience with MATLAB, Simulink, Python, C++, Go, and/or Linux Systems. 
• Experience conducting spacecraft operations and satellite command and control with an emphasis on system reliability and uptime.
• Ability to quickly understand and navigate complex systems and detailed requirements.
• Experience with orbital mechanics and resident space object tracking capabilities.
• Experience developing 3-DOF simplified and 6-DOF high-fidelity dynamics simulation models used for GNC systems analysis and validation.
• Familiarity with rendezvous proximity operations and docking, orbital mechanics with propulsive spacecraft, spacecraft attitude determination and controls.
• Strong knowledge of spacecraft dynamics, orbital mechanics, and control theory.
• Eligible to obtain and maintain an active U.S. Top Secret security clearance.

PREFERRED QUALIFICATIONS

• A desire to work on critical software and hardware designs in the space domain.
• Experience testing propulsion subsystems in laboratory environments that mimic the space environmental constraints.
• Experience with testing/validation leveraging FlatSats, Hardware-in-the-Loop testbeds and digital spacecraft simulators through nominal and fault scenarios.
• Experience with computer vision and perception algorithms to support GNC operations.
• Exposure to US satellite operations policy and constraints for relevant mission threads in all orbits.

Principal Thermal Protection System Engineer 

Location: Playa Vista, California (in-person, five days per week) 

Launch has changed the economics of space. Now it is time to return. 

Outpost is building the missing infrastructure between orbit and Earth: reusable vehicles that can bring payloads back from space and deliver them to a precise location within hours. We call it exologistics, space-to-Earth logistics at planetary scale. This is not a paper concept or a distant roadmap. Our system is in active development, with core technologies advancing toward flight readiness. 

The need is already here and the market has responded. We have validated demand through multiple defense and civil agreements, and a growing pipeline across government and commercial customers.  

Outpost is building the logistics layer that makes space economically useful in a new way: the ability to move material from orbit to Earth quickly, reliably, and affordably. Over time, that supports point-to-point logistics, 10 tons of cargo, anywhere on Earth in an hour. It also creates the foundation for a reusable reentry network and enables new categories of space activity, including in-space manufacturing, supporting AI data centers, advanced manufacturing and novel materials. 

We have a strong foundation, clear demand, and a technical path in front of us. Now the company is scaling rapidly. We are expanding the team, growing our operational footprint, and building the systems needed to execute at the next level. This is a chance to join a company with real traction, working on a problem that matters, at the point where execution and scale begin to define the outcome.

The Role 

The Principal Thermal Protection System Engineer (TPS) will lead the design, analysis, and implementation of the (TPS) for our Carryall reentry vehicle. This role sits at the intersection of high-temperature materials science, aerothermal analysis, and mechanical design. You will own the primary barrier that allows our vehicles to survive the extreme environments of reentry, turning the "impossible" physics of returning from orbit into a repeatable, reusable operation. 

You will work closely with engineering leadership and the mechanical engineering team, to architect a TPS that is robust enough to handle hypersonic heat fluxes and flexible enough to stow and deploy on orbit. This is a hands-on technical leadership role for someone who is ready to take ownership of a flight-critical subsystem from design through to flight qualification. 

Responsibilities 

• Lead TPS Architecture: Define the TPS architecture and thermal protection strategy for the Carryall vehicle, selecting materials and material stack-ups that balance thermal performance, mass, and mechanical flexibility.
• Aerothermal Analysis: Perform and guide high-fidelity aeroheating analysis (CFD) and thermal response modeling to validate specifications and predict performance under reentry loads.
• Material Qualification: Lead the testing and characterization of flexible and rigid TPS materials, including arc-jet testing, radiant heat testing, and mechanical load testing.
• Design for Manufacturability: Oversee the transition from theoretical design to flight hardware, managing vendor relationships for TPS materials including fabrics, thermal barriers, and adhesives.
• Validation & Verification: Develop and support the verification plan for the TPS subsystem, ensuring all requirements are met prior to flight.
• Technical Leadership: Mentor junior engineers and contribute to the technical roadmap for future scaled up re-entry vehicle generations 

Qualifications 

• Bachelor's degree or higher in Aerospace, Mechanical, or Materials Engineering (or related field).
• 10+ years of experience in the development of thermal protection systems, hypersonic aerodynamics, or high-temperature structural materials.
• Deep understanding of heat transfer mechanisms (convection, radiation, conduction) specifically during atmospheric entry.
• Simulation expertise: Proficiency with thermal and ablation modeling tools (e.g., FIAT, CMA, Thermal Desktop, or custom solvers) and analysis software (ANSYS, MATLAB/Python).
• Hands-on experience with hardware testing, specifically environmental or arc-jet testing of TPS materials.
• Proven ability to manage complex trade studies involving mass, volume, and thermal performance.
• Strong written and verbal communication skills to articulate complex thermal risks to the broader engineering team.
• Comfortable working in a fast-paced startup environment where requirements may evolve and urgency is key. 

Preferred Experience 

• Active U.S. Government Security Clearance (Not required, but beneficial)
• Experience with Deployable Aerodynamic Decelerators (HIAD/ADEPT) or flexible thermal protection systems for reentry at extreme thermal heat. 
• Direct experience with hypersonic vehicle flight hardware from concept to post-flight analysis.
• Familiarity with government or commercial spaceflight standards (NASA/DoD) for thermal protection.
• Experience in a "Design, Build, Fly" environment with rapid iteration cycles. 

Compensation & Benefits 

• Competitive compensation: $160,000 - $210,000; (commensurate with experience). 
• Additional Compensation:  Annual performance-based bonuses that reward your impact.
• Shared upside: Meaningful equity in Outpost so you share directly in the value you help create.
• Comprehensive healthcare: Medical, dental, and vision coverage to keep you and your loved ones covered. We cover the base tier of medical insurance and all premiums of vision and dental. 
  
• Protection when it matters: Company-provided short- and long-term disability coverage for peace of mind, plus life insurance for even more security.
• PTO: Recharge on your own terms with paid time off, plus 9 days of paid holidays.
• Invest in your future: 401(k) with company match to help you build long-term wealth.
• Fueled for the mission: Daily DoorDash lunch stipend, plus unlimited snacks, coffee, and tea to keep you energized.
• Mission that matters: Work shoulder-to-shoulder with leaders from aerospace, new space, and deep-tech industries building the future of orbital infrastructure.
• Pet Friendly Office: Bring your furry friend into the office so that they can be a part of our mission too.
• Monthly Company Happy Hours and Events: Drinks at the local bar, hibachi nights, mini golfing and more! 

The Warfighter Systems team is pioneering a future where mixed reality (MR) creates immersive, intuitive, and life-saving technologies. We develop next-generation capabilities that put advanced technology directly in the hands of operators, enhancing operational effectiveness and survivability. This team is responsible for taking innovative concepts from prototype to fieldable product on aggressive timelines.

ABOUT THE JOB

You'll lead the technical development and productization of a revolutionary advanced counter-UAS system from working prototype to full-rate production. This system uses computer vision and various sensing technology combined with precision actuation to enable precise engagement of fast-moving UAS targets. You'll own the transition from a 1-of-1 proof of concept to a ruggedized, manufacturable product ready for demanding operational environments within a year. This includes component selection and qualification, system integration across multiple operational platforms, computer vision algorithm optimization, precision actuation and mechanical design, and manufacturing process development. You'll build and lead a dedicated engineering team within Anduril's Warfighter Systems team, establishing the technical vision and driving rapid execution from concept to fielded capability.

WHAT YOU’LL DO

• Lead end-to-end technical and programmatic execution to transition a working prototype into a production-ready product for operational customers
• Build and manage a high-performing engineering team of 5-10 direct reports, establishing team culture, processes, and technical standards
• Own the technical roadmap for productization, including component selection, design for manufacturing, ruggedization, safety systems, and qualification testing
• Work cross-functionally with software, mechanical, electrical, and autonomy teams to optimize system performance and reliability
• Establish and execute qualification and testing programs to validate system performance, reliability, and safety under operational conditions
• Support operational testing with end users, incorporating feedback to refine design and performance
• Ensure all work meets applicable safety standards, regulatory requirements, and rigorous qualification standards
• Manage technical risk, schedule, and resource planning to deliver capability on aggressive timelines
• Travel 25%+ to test sites, manufacturing partners, and customer locations

REQUIRED QUALIFICATIONS

• Bachelor's degree or higher in Mechanical, Electrical, Robotics, Actuation or related engineering field
• 10+ years of hardware engineering experience with demonstrated progression in technical leadership roles
• Proven track record taking prototype or proof-of-concept hardware systems to production and customer delivery
• Deep experience with electromechanical systems integration, precision actuation, and mechatronics
• Strong understanding of manufacturing processes, design for manufacturability (DFM), reliability, and supply chain management
• Experience building and leading engineering teams, setting technical vision, and driving execution
• Excellent communication skills and ability to interface with cross-functional teams and leadership
• Must be a U.S. person & eligible to obtain and maintain a U.S. Secret security clearance
• Must be authorized to work in the United States

PREFERRED QUALIFICATIONS

• Proven ability to take multiple products to market
• Background in precision targeting systems, stabilization platforms, or advanced control systems. Preference for deep experience with advanced optical-mechanical systems.
• Knowledge of MIL-STD requirements and rigorous qualification programs
• Experience with lidar, optical sensors, or range-finding technologies
• Familiarity with real-time control systems and embedded computing platforms
• Background in ruggedization and environmental qualification testing

As a Senior Thermal Engineer, you will serve as the technical authority for Divergent’s aero-structures portfolio, responsible for pushing the envelope of our technology with respect to thermal optimization and performance of Divergent’s structural components. You’ll be accountable for owning the full development life cycle from conceptual design through customer delivery, ensuring high-performance, reliable systems that meet the demands of complex, unforgiving environments. 

This role demands both technical depth and program maturity: the ability to engage government and industry partners to refine requirements for thermal performance for both new and legacy systems, while fostering internal alignment across internal engineering teams. You will be called on to derive thermal requirements in the absence of written specifications and are expected to challenge and shape requirements when appropriate — ensuring that the final product meets mission intent. 

Responsibilities: 

• Serve as the thermal design authority for Divergent’s A&D Structures team, owning thermal architecture from concept through qualification. 

• Define, negotiate, and validate thermal requirements and budgets with government and industry customers. 

• Develop thermal management strategies and lead internal trade studies—including heat rejection, insulation, and material selection. 

• Guide thermal aspects of design reviews, establish standardized thermal maturity metrics and qualification criteria across Divergent’s A&D customer portfolio. 

• Build and maintain high-fidelity thermal models (conduction, convection, radiation, steady state and transient analyses) and drive correlation with test data throughout the product lifecycle. Accountable for comprehensive thermal qualification and verification planning, including environmental testing, thermal cycling, and thermal analysis correlation. 

• Collaborate with senior technical experts to establish thermal analysis standards and model technical excellence inside and outside the organization, including with government customers and prime contractors. 

• Support vehicle builds and product development testing, including thermal instrumentation, data reduction, and troubleshooting. 

• Collaborates with senior technical experts to establish technical standards, and models technical excellence inside and outside the organization including government customers and prime contractors. 

Basic Qualifications: 

• Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, or equivalent technical discipline with a thermal sciences focus. 

• Minimum 8 years of experience in thermal analysis, design, or management. 

• Excellent written and verbal communication skills with the ability to synthesize complex thermal development engineering to simple terms and find alignment across multifunctional stakeholders including government customers and prime contractors. 

• Strong analytical and practical mindset—comfortable navigating ambiguity and driving structured clarity across thermal, structural, and systems boundaries. 

• Demonstrated excellence in thermal requirements definition, verification planning, and risk management across terrestrial & space thermal development and multidisciplinary teams. 

• Experience interfacing with engineering, testing, and manufacturing groups to understand system designs and the associated thermal constraints. 

• Demonstrated expertise in thermal analysis throughout the design, build, and test phases of a development cycle, including steady-state and transient modeling. 

• Proficiency with industry thermal analysis tools such as ANSYS (Fluent, Thermal Desktop, Icepak), Star CCM+, PowerFlow 

• Ability to lawfully access information and technology that is subject to US export controls  

• U.S. citizen eligible for DoD security clearance (Secret or higher preferred). 

Preferred Qualifications: 

• 8+ years of experience in a broad range of terrestrial and space system development applications and qualification. 

• Familiarity with relevant MIL-STDs (e.g., MIL-STD-810 thermal methods, MIL-STD-1540 environmental testing) and NASA STD’s (e.g., NASA-STD-7002 – Thermal Verification, KSC-STD-Z-0017). Proficiency in NASA-ST-6030 - Additive Manufacturing Requirements for Spaceflight Systems preferred 

• Demonstrated excellence in developing thermal solutions for aerospace and defense applications, including aerodynamic heating, electronics cooling, and propulsion thermal management. 

• Experience with additive manufacturing, advanced thermal interface materials, or novel cooling architectures. 

• Expert understanding of thermophysical properties and thermal behavior of various material systems (composites, adhesives, metals) across operational temperature ranges. 

• Experience with thermal vacuum testing, altitude simulation, and correlation of thermal models to test data. 

Work Environment 

• Requires frequent standing, walking, and interaction across production and R&D work areas. 

• May occasionally require extended or weekend hours to meet production deadlines. 

• • Work is performed in an office environment and requires the ability to operate standard office equipment and keyboards.   

Compensation

At Divergent, our pay range is based on the level of the job.  For this role, we will consider candidates at level E05 as evaluated through our interview process

• EO5 / Senior: $141,380 - $194,390

What You’ll Do

Samsung Semiconductor is seeking a Senior Systems Engineer to lead the design, modeling, simulation, and experimental validation of high-performance optical products and precision lenses.

You will apply strong fundamentals in physics, optics, and mathematics, alongside hands-on experience in electro-optical prototyping and hardware integration. Your role involves advanced ray-tracing simulations for complex LiDAR systems to generate 3D point cloud data and ensure system-level performance.

Location: Daily onsite presence at our San Jose headquarters in alignment with our Flexible Work policy with an average of 15% travel per month

Reports to: Director

• Lead the design, modeling, and experimental validation of LiDAR sensors and precision optics.
• Optimize optical architectures using sequential and non-sequential ray-tracing tools (e.g., Zemax, LightTools, or Speos).
• Design high-precision lenses and validate the seamless integration of optical components.
• Develop detailed ray-tracing models for sophisticated LiDAR scanners (multi-beam, scanning mechanisms, and detectors) while assembling and aligning electro-optical setups.
• Simulate environmental interactions to produce accurate 3D point cloud data for algorithm verification and system validation.
• Script custom simulation tools in Python or other languages for error budgeting and performance analysis.
• Execute experimental measurements and data acquisition to drive iterative design improvements and technical reporting.
• Complete other responsibilities as assigned.

What You Bring

• Master’s degree with 3+ years experience or PhD in Physics, Optical Engineering, Electrical Engineering, or a related field.
• 3 + years in automotive semiconductor or sensor industries, focused on optical system design and manufacturing.
• Solid background in physics, optics, and applied mathematics.
• Proven expertise in optical design, modeling, and experimental validation.
• You’re inclusive, adapting your style to the situation and diverse global norms of our people.
• An avid learner, you approach challenges with curiosity and resilience, seeking data to help build understanding.
• You’re collaborative, building relationships, humbly offering support and openly welcoming approaches.
• Innovative and creative, you proactively explore new ideas and adapt quickly to change.

#LI-MD1

Vast is looking for a Integration Engineer, Fluid Systems Test, reporting to the Sr. Manager, Integration Test, to support the development of the systems that will be required for the design and build of artificial-gravity human-rated space stations.

This will be a full-time, exempt position located in our Long Beach location. 

Responsibilities

• Own design, build, and commissioning of fluid system GSE and test stands.
• Develop clear and robust test plans for on-vehicle checkouts, fluids, instrumentation, and high-pressure testing.
• Act as test director, providing status updates and leading handoff meetings.
• Conduct PDRs, CDRs, and TRRs before design and test execution.
• Produce professional documentation including mechanical, fluid, and instrumentation schematics.
• Document non-conformances and collaborate with quality team on root cause corrective actions.
• Adhere to, enforce, and improve test processes and best practices.
• Collaborate with distributed engineering organizations to define test plans, requirements, and schedules.
• Partner with engineers, SMEs, and technicians to solve complex fluid system problems.
• Mentor engineers and technicians on the team.

Minimum Qualifications

• Bachelor's degree in mechanical, manufacturing, aerospace, electrical, or similar field.
• 4+ years of related engineering experience.
• Hands on hardware integration and testing experience.
• Experience with working with technicians and running multi person operations.
• Experience writing test plans, procedures, presentations, and providing go/no-go judgment and rationale.

Preferred Skills & Experience

• Experience with pressure testing, fluid system design, proof and leak checks in compliance with ASME B31.3.
• Experience planning and executing engineering operations in time-sensitive, high-risk environments.
• Knowledge of pressure safety standards (D.O.O, ASME, API, NFPA) for quantity distance and keep-out zones.
• Experience with high-pressure gas systems and closed-loop control systems.
• Ability to design and perform environmental testing per SMC-S-016, GEVS NASA-STD-7000a, MIL STD 810G.
• Experience designing and implementing instrumentation systems and precision measurement devices.
• Experience with DAQ hardware and software (NI PXI, cRIO, cDAQ, Dewesoft, Beckhoff).
• Ability to generate test system P&IDs using Visio, Lucidchart, or equivalent.
• Experience writing and executing test plans/procedures in collaboration with design engineers.
• Perform structured root cause analysis of test failures.
• Experience in structural design and analysis of test fixtures.
• Proficiency with CAD systems (NX preferred).
• Experience with PLM systems (Teamcenter preferred) and version control (SVN, GIT).
• Experience with project scheduling tools (Smartsheet, MS Project, or equivalent).
• Experience with JIRA and/or Confluence.
• Ability to quickly troubleshoot new and existing systems.
• Ability to rapidly shift priorities across multiple projects and deliver high-value results iteratively.
• Strong collaboration skills across cross-functional engineering teams.

Additional Requirements:

• Ability to travel for vehicle test support (20%) including extended travel (up to 1 month) for final vehicle test.
• Ability to work varying hours, shifts, extended hours, and weekends as needed.
• Ability to stoop, bend, crawl, and maneuver in tight spaces; physically able to lift up to 25 lbs unassisted.
• Ability to perform in a fast-paced, rapidly changing work environment.

Pay Range: 

• Integration Engineer II: $112,340 - $159,468
• Senior Integration Engineer: $$137,760 - $195,552
• Staff Integration Engineer: $162,360 - $230,472

Vast is looking for a Integration Engineer, Avionics Test, reporting to the Sr. Manager, Integration, to support the development of the systems required for the  build and test of artificial-gravity human-rated space stations.

This will be a full-time, exempt position in our Long Beach location. 

As a Integration Test Engineer, you will develop creative solutions to complex assembly and production problems. You will play a critical role in our development and production teams for identifying and defining test processes and plans and then executing. Your input will be vital in transitioning the space station from design to a built and tested station ready to host humans in space.

Responsibilities: 

• Plan, schedule, prepare, coordinate, direct, and exercise functional authority for completion of tests.
• Enable day-to-day execution of the vehicle integration and test flow.
• Collaborate with the distributed engineering organizations to define and manage test plans, requirements, and schedules.
• Ensure integration procedures are continuously evolving to reflect the most efficient assembly practices.
• Develop, qualify, and refine manufacturing processes to meet all requirements including safety, quality, efficiency, and delivery.
• Collaborate with other engineers, subject matter experts, and technicians to solve complex production issues.
• Act as test director and provide status updates and run handoff and other tagups.
• Document and provide resolution to non-conformances and collaborate with the quality team to implement root cause corrective actions.

Minimum Qualifications:

• Bachelor's degree in mechanical, manufacturing, aerospace, electrical, or similar field.
• Hands on hardware integration and testing experience.
• Experience writing test plans, procedures, presentations, and providing go/no-go judgment and rationale.

Preferred Skills & Experience:

• Experience with the build, assembly, integration, or test of complex assemblies and systems.
• Familiarity with Linux and Python environments.
• Ability to make independent judgments with limited information.
• Experience writing test plans, procedures, and providing go/no-go judgment and rationale.
• Experience planning and executing vehicle level system verifications, leak checks, or environmental tests.
• Comfortable working in a high-stress environment balancing several projects at any given time, and the flexibility to adjust for abrupt changes in strategic direction.

Additional Requirements:

• Ability to travel up to 20% of the time.
• Willingness to work evenings and/or weekends to support critical mission milestones.
• Ability to lift up to 25 lbs unassisted.

Pay Range: 

• Integration Engineer II: $112,340 - $159,468
• Senior Integration Engineer: $137,760 - $195,552
• Staff Integration Engineer: $162,360 - $230,472

ABOUT THE TEAM

Anduril is seeking a Principal Powertrain Engineer to join the Omen team at our Costa Mesa HQ. Omen is Anduril’s hover-to-cruise autonomous air vehicle (AAV) that packs the endurance, payload, and mission flexibility of much larger airplanes into a novel runway-independent Group 3 platform. Omen can operate from ship decks, beaches, or remote island clearings, providing true runway independence and freedom of maneuver across defense and civilian domains. Omen is the first tail-sitter aircraft with a mass-production contract, with an order of 50 systems representing a decisive investment that anchors production and accelerates the development of future systems.

You will work on new aircraft development in a lean, high-ownership culture where you directly shape the product and operate at a velocity to fly new designs within months, not years.

ABOUT THE ROLE

In this role, you will design, develop, and integrate a high performance hybrid-electric propulsion system into the Omen air vehicle. You will own and design powertrain components from concept through production, optimizing for the unique demands of a tail-sitter platform including VTOL operations, efficient cruise flight, and rapid transition between flight modes. As a Principal Powertrain Engineer, you will work closely with program leadership and cross-functional teammates to deliver a high-performance, reliable propulsion solution. You will drive component selection, manage supplier relationships, lead testing and validation efforts, and ensure the powertrain meets performance, weight, thermal, and reliability requirements. This is a hands-on role where you will tackle hard technical problems, mentor junior engineers, and play a critical role in bringing a groundbreaking aircraft platform to operational reality. You will be a trusted subject matter expert in the design and development of our powertrain. Join our dynamic team and help us build the next generation of autonomous flight systems.

WHAT YOU'LL DO

• Own the design of hybrid-electric propulsion systems including motors, generators, battery packs, fuel systems, power electronics, and propeller/rotor integration
• Electric machine sizing and design, transmission sizing and design, inverter sizing and design, and how the full system integrates into the air vehicle.
• Conduct powertrain performance analysis, thermal modeling, and energy optimization studies to meet mission requirements for endurance, payload capacity, and operational envelope
• Lead the development and execution of test plans for powertrain subsystems and full-up systems, including ground test stands, HILs, and flight test
• Define and validate technical performance measures including power, efficiency, thermal limits, and fault tolerance across all operating modes
• Create detailed technical specifications and interface control documents for powertrain components and assemblies
• Collaborate with the Airframe and Vehicle Controls teams for solutions on system packaging, structural/thermal interfaces, and thrust/power control architectures
• Conduct design reviews, perform requirements analysis, and plan system verification to ensure compliance with project goals and industry standards
• Establish and manage supplier relationships for critical powertrain components, including technical requirements definition, design reviews, and qualification oversight

REQUIRED QUALIFICATIONS

• High-ownership and a bias toward action – if you see a problem, you want to fix it
• Bachelor's degree in Aerospace Engineering, Mechanical Engineer, Robotics, Physics, or related technical discipline
• Minimum of 12+ professional years in technical leadership roles such as a Principal Engineer, Chief Engineer, or similarly relevant position focused on propulsion systems
• Experience in engineering team leadership and project execution for aerospace, automotive, or defense sectors with focus on electric or hybrid propulsion
• Proficiency in powertrain engineering skillsets including electric motors, transmissions, generators, power electronics, battery systems, and thermal management
• Hands-on experience with propulsion system development, testing, and integration for aerospace platforms
• Travel to test sites and vendors as needed

PREFERRED QUALIFICATIONS

• Direct experience developing hybrid-electric or electric propulsion systems for aircraft, rotorcraft, eVTOL, or UAS platforms
• Proven track record leading propulsion systems through full qualification campaigns from early development through flight test and production
• Experience with propulsion system modeling and simulation tools
• Familiarity with aviation environmental and EMI standards (MIL-STD-810, MIL-STD-461, DO-160, or equivalent) and qualification campaigns for flight hardware
• Experience with Formula SAE, Baja SAE, Design Build Fly, or similar competitive engineering programs demonstrating hands-on vehicle integration experience

Mechanical Engineer 

Location: Playa Vista, California (in-person, five days per week) 

Launch has changed the economics of space. Now it is time to return. 

Outpost is building the missing infrastructure between orbit and Earth: reusable vehicles that can bring payloads back from space and deliver them to a precise location within hours. We call it exologistics, space-to-Earth logistics at planetary scale. This is not a paper concept or a distant roadmap. Our system is in active development, with core technologies advancing toward flight readiness. 

The need is already here, and the market has responded. We have validated demand through multiple defense and civil agreements, and a growing pipeline across government and commercial customers. 

Outpost is building the logistics layer that makes space economically useful in a new way: the ability to move material from orbit to Earth quickly, reliably, and affordably. Over time, that supports point-to-point logistics, 10 tons of cargo, anywhere on Earth in an hour. It also creates the foundation for a reusable reentry network and enables new categories of space activity, including in-space manufacturing, supporting AI data centers, advanced manufacturing, and novel materials. 

We have a strong foundation, clear demand, and a technical path in front of us. Now the company is scaling rapidly. We are expanding the team, growing our operational footprint, and building the systems needed to execute at the next level. This is a chance to join a company with real traction, working on a problem that matters, at the point where execution and scale begin to define the outcome.  

The Role 

Outpost's vehicles are unlike anything in the market, reusable, fabric-shielded, paraglider-guided Earth-return spacecraft. We're looking for a Mechanical Engineer who will own the design and delivery of flight and ground hardware for our Atmospheric Entry (ATMO) subsystem, the hardware that keeps customer payloads safe from launch through landing. 

This role spans the full engineering lifecycle, design, analysis, drawing release, build support, and test. You'll work alongside an integrated team and have meaningful ownership of your hardware from day one. 

What You’ll Do 

• Design and develop mechanical systems for atmospheric recovery, including deployable structures, aerodynamic decelerators, recovery mechanisms, airframe interfaces, and precision landing hardware from requirements through release, build support, and qualification.
• Develop CDR-level design packages: CAD, drawings, specifications, analysis, and test plans.
• Define and manage hardware requirements, interface with mission operations and payload customers.
• Perform or coordinate structural and thermal analysis to verify hardware margins.
• Write and execute qualification and acceptance test procedures, support environmental test campaigns.
• Participate in peer reviews and formal milestone reviews (CDR, TRR, etc.).
• Drive design reviews (PDR/CDR) and prepare clear documentation, drawings, BOMs, and work instructions.
• Perform other duties as required.

 Qualifications 

• Bachelor's degree or higher in Aerospace, Mechanical, or Systems Engineering.
• 5-10 years designing flight hardware structures and mechanisms.
• Experience taking hardware from concept to production and/or flight.
• Strong proficiency in CAD (SolidWorks, NX, or similar) and mechanical analysis tools (structural/thermal in Ansys - Solidworks).
• Experience designing structures, mechanisms, deployables, or aerodynamic structures (parachutes/paragliders, flaps, linkages, hinges, etc.).
• Understanding of load path, interfaces, and environmental requirements for high-energy flight environments.
• Experience executing rapid, hands-on prototypes to support fast design–build–test cycles.
• Excellent documentation, communication, and technical writing skills.
• Understanding of spacecraft environmental requirements (launch loads, shock, vibration, thermal).
• Write and read engineering requirements and interface control documents.
• Strong cross-functional communication - you'll work daily with systems, integration, and test engineers. 

 Preferred Experience 

• Experience taking hardware through at least one formal design review (PDR or CDR); exposure to qualification testing strongly preferred. 
• Experience with reentry systems, atmospheric flight vehicles, TPS interfaces, or parachute/paraglider systems.
• Background integrating soft goods with rigid structures.
• Experience in hypersonic, supersonic, or high-aero-load environments.
• Field test experience (drop tests, flight tests, parachute deployments, etc.).
• Familiarity with DOF-limited mechanisms and precision actuation in harsh environments. 

Compensation & Benefits

• Competitive compensation: $125,000 – $160,000; (commensurate with experience).
• Additional Compensation:  Annual performance-based bonuses that reward your impact.
• Shared upside: Meaningful equity in Outpost so you share directly in the value you help create.
• Comprehensive healthcare: Medical, dental, and vision coverage to keep you and your loved ones covered. We cover the base tier of medical insurance and all premiums of vision and dental. 
  
• Protection when it matters: Company-provided short- and long-term disability coverage for peace of mind, plus life insurance for even more security.
• PTO: Recharge on your own terms with paid time off, plus 9 days of paid holidays.
• Invest in your future: 401(k) with company match to help you build long-term wealth.
• Fueled for the mission: Daily DoorDash lunch stipend, plus unlimited snacks, coffee, and tea to keep you energized.
• Mission that matters: Work shoulder-to-shoulder with leaders from aerospace, new space, and deep-tech industries building the future of orbital infrastructure.
• Pet Friendly Office: Bring your furry friend into the office so that they can be a part of our mission too.
• Monthly Company Happy Hours and Events: Drinks at the local bar, hibachi nights, mini golfing and more! 

You must be a U.S. citizen or lawful permanent resident of the U.S., protected individual as defined by 22 C.F.R. § 120.15 ,or eligible to obtain the required authorizations from the U.S. Department of State. 

CHAOS Industries is redefining modern defense with a multi-product portfolio that gives the ultimate advantage—domain dominance. The company's products are powered by Coherent Distributed Networks (CDN™), empowering warfighters, commercial air operators, and border protection teams to act faster, adapt rapidly, and stay ahead of evolving threats. 

CHAOS Industries was founded in 2022 and has raised a total of $1 billion in funding from leading investors, including 8VC, Accel, and Valor Equity Partners. The company is headquartered in Los Angeles, with offices in Washington, D.C., San Francisco, San Diego, Seattle, and London. For more information, please visit www.chaosinc.com.

Role Overview:

• Own RF-centric integration, debug, characterization, and validation for radar hardware, subsystems, and test environments
• Serve as the Integration and Test team's lead RF engineer across lab, production, chamber, and field environments — ensuring RF chains and test setups produce trustworthy measurements and enable rapid root-cause isolation

Responsibilities:

• Lead RF debug, characterization, and acceptance for radar hardware — transmit chains, receive chains, antennas, cables, adapters, switches, filters, LNAs, HPAs, SDRs, and frequency conversion stages — including qualifying new components for integration into radar systems
• Diagnose RF failures by selecting and executing the appropriate measurements — S-parameters, VSWR, noise figure, phase noise, IP3/P1dB, gain/compression, group delay, harmonics/spurs, isolation, and time-domain — and reconcile component-level results against system-level performance such as detection range, sensitivity, and calibration accuracy
• Choose the right instrument for the failure mode — VNAs, spectrum analyzers, signal generators, phase noise analyzers, power meters, oscilloscopes, noise figure analyzers, and supporting calibration standards.
• Isolate subtle RF issues such as insertion loss drift, intermittent behavior, phase instability, spurious content, compression effects, LO leakage, and timing/frequency drift
• Define, configure, and calibrate RF test setups so measurements are repeatable and representative of system operating conditions
• Determine whether an observed failure is caused by component defect, cable/connector/interface degradation, calibration error, fixture/setup limitation, environmental effect, or broader system interaction — and connect those measurement results back to radar-level performance impacts
• Partner with systems, hardware, software, firmware, and integration engineers to root-cause failures that span RF, digital, timing, and test-setup boundaries
• Create RF test procedures, acceptance criteria, troubleshooting guides, and characterization reports that technicians and engineers can execute repeatably
• Plan and execute phased array testing in our anechoic chamber, including EIRP, transmit and receive beam patterns, sidelobe levels, beam steering accuracy, element-level calibration, and array calibration verification across the operating band
• Stand up and improve RF portions of test racks, bench setups, and STE environments — including automated or semi-automated RF data collection, analysis, and reporting
• Work 5 days per week out of our office in Los Angeles (Hawthorne), California.

Minimum Requirements:

• Bachelor’s degree in Electrical Engineering, Physics, Applied Physics, or another related technical field, or equivalent hands-on RF test experience
• 5+ years of experience in RF test, RF integration, RF validation, radar systems, wireless systems, aerospace/defense systems, or a similar high-performance RF environment
• Strong hands-on experience using RF test equipment to debug hardware and characterize components and subsystems
• Strong understanding of RF fundamentals including scattering parameters, impedance matching, gain, noise figure, linearity, compression, isolation, phase stability, and frequency-domain behavior
• Experience designing and executing RF test plans and interpreting ambiguous measurement results
• Ability to connect component-level measurements to system-level behavior and performance degradation
• Strong documentation and communication skills, including the ability to explain RF issues clearly to cross-functional teams
• High attention to detail and disciplined lab/test practices

Preferred Requirements:

• Experience with radar systems, phased array systems, EW systems, SATCOM systems, or other advanced RF/microwave platforms
• Hands-on experience with anechoic chamber testing of phased arrays or antennas, including EIRP measurement, near-field/far-field pattern measurement, beam steering verification, and array calibration techniques
• Experience diagnosing radar calibration failures or phase-sensitive RF performance issues
• Familiarity with phase noise measurement methods, equipment selection, and interpretation of results
• Experience characterizing high-power amplifiers, low-noise amplifiers, frequency converters, SDRs, antennas, cables, adapters, and passive RF networks
• Experience with RF/microwave frequencies where test setup quality, cable behavior, connector condition, and calibration technique materially affect results
• Experience creating custom RF test fixtures, calibration approaches, or troubleshooting methods for nonstandard hardware
• Familiarity with automation or analysis tools such as Python, MATLAB, LabVIEW, or instrument control frameworks
• Experience working in lab and field environments where environmental conditions, handling, and installation quality can affect RF performance
• Experience working closely with technicians to improve setup quality, measurement repeatability, and fault isolation speed

Why CHAOS?

• Health Benefits: Medical, dental, and vision benefits 100% paid for by the company
• Additional benefits: 401k (+ 50% company match up to 6% of pay), FSA, HSA, life insurance, and more
• Our Perks: Free daily lunch, ‘No meeting Fridays’, unlimited PTO, casual dress code
• Compensation Components: Competitive base salaries, generous pre-IPO stock option grants, relocation assistance, and (coming soon!) annual bonuses
• Team Growth: 250 employees and counting across 5 global offices

The stated compensation range reflects only the targeted base compensation range and excludes additional earnings such as bonus, equity, and benefits. If your compensation requirements fall outside of the range, we still encourage you to apply. The salary range for this role is an estimate based on a range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. 

Recruiting Agencies: CHAOS Industries does not accept unsolicited resumes or outreach. Unsolicited submissions will not be reviewed or compensated.

#LI-onsite

The Hardware Engineering Organization is looking for a Senior EMI/EMC Test Engineer to deliver value and innovation as Anduril’s products across all domains - air, land, water, and space - are introduced to the market. The team provides rapid, comprehensive development and compliance test capabilities that inform design and architecture trades meanwhile improving system performance and reliability. This is more than mere test execution, this is ownership of electromagnetic resilience and continuous improvement through rigorous evaluation, troubleshooting, and innovation.

WHAT YOU'LL DO

• Create and maintain electrical system test strategy, and test plans for various Anduril products.
• Conduct electrical compliance and robustness testing such as MIL-STD-461, MIL-STD-704, and MIL-STD-1275.
• Design and deploy electrical system integration test benches. (Iron Bird/Copper Bird/Lab Car).
• Support on vehicle level to component level test requirement decomposition.
• Drive coverage and analysis of failures observed in unit-level, integration, and system-level testing.
• Devise mitigations for test failures and path to compliance and reliability.
• Perform integration testing of electrical subsystems and their functionality.
• Leverage data analysis and existing tools to reproduce and characterize failures.
• Support environmental reliability testing (HALT/HASS) efforts on PCBA and LRU level.
• Develop customized harnesses and fixtures for EMI/EMC and power quality tests.
• Support validation of automated test systems.

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Electrical/Electronics, Computer, Mechanical Engineering, or related fields
• 5+ years of relevant industry experience with emphasis on EMI/EMC, hardware validation, and integration testing
• Familiarity with hardware development life cycle, reliability, and compliance testing
• General understanding of engineering concepts, principles, and theory with technical experience demonstrating the application of those concepts while ensuring safety and regulatory compliance
• Familiarity with Python and/or MATLAB for data parsing and data visualization
• Familiarity with electronics test equipment such as power supplies, electronic loads, oscilloscope, function generators, signal generators, spectrum analyzers, network analyzers, data acquisition and measurement sensors
• Familiarity with environmental testing such as MIL-STD-461, MIL-STD-464, MIL-STD-704, MIL-STD-810, and MIL-STD-1275
• Strong root cause analysis skills
• Excellent written, verbal, interpersonal and communication skills
• Ability to travel to and work at remote sites supporting test integration, commissioning, and training as required
• Must be able to obtain a security clearance

PREFERRED QUALIFICATIONS

• 10+ years of relevant industry experience
• Pursuing a Master’s of Science or PHD in Electrical Engineering, Electronics Engineering Mechanical Engineering, Computer Science or related field
• Experience with firmware integration, vehicle level validation and debugging
• Demonstrated knowledge of regulatory compliance standards
• Familiarity with LabVIEW, TILE, or similar software for test execution and automation
• Familiarity with analytical and modeling tools like SPICE, HFSS, CST, etc.

The Hardware Engineering Organization is looking for an EMI/EMC Test Engineer to deliver value and innovation as Anduril’s products across all domains - air, land, water, and space - are introduced to the market. The team provides rapid, comprehensive development and compliance test capabilities that inform design and architecture trades meanwhile improving system performance and reliability. This is more than mere test execution, this is ownership of electromagnetic resilience and continuous improvement through rigorous evaluation, troubleshooting, and innovation.

WHAT YOU'LL DO

• Create and maintain electrical system test strategy, and test plans for various Anduril products.
• Conduct electrical compliance and robustness testing such as MIL-STD-461, MIL-STD-704, and MIL-STD-1275.
• Design and deploy electrical system integration test benches. (Iron Bird/Copper Bird/Lab Car).
• Support on vehicle level to component level test requirement decomposition.
• Drive coverage and analysis of failures observed in unit-level, integration, and system-level testing.
• Devise mitigations for test failures and path to compliance and reliability.
• Perform integration testing of electrical subsystems and their functionality.
• Leverage data analysis and existing tools to reproduce and characterize failures.
• Support environmental reliability testing (HALT/HASS) efforts on PCBA and LRU level.
• Develop customized harnesses and fixtures for EMI/EMC and power quality tests.
• Support validation of automated test systems.

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Electrical/Electronics, Computer, Mechanical Engineering, or related fields
• 5+ years of relevant industry experience with emphasis on EMI/EMC, hardware validation, and integration testing
• Familiarity with hardware development life cycle, reliability, and compliance testing
• General understanding of engineering concepts, principles, and theory with technical experience demonstrating the application of those concepts while ensuring safety and regulatory compliance
• Familiarity with Python and/or MATLAB for data parsing and data visualization
• Familiarity with electronics test equipment such as power supplies, electronic loads, oscilloscope, function generators, signal generators, spectrum analyzers, network analyzers, data acquisition and measurement sensors
• Familiarity with environmental testing such as MIL-STD-461, MIL-STD-464, MIL-STD-704, MIL-STD-810, and MIL-STD-1275
• Strong root cause analysis skills
• Excellent written, verbal, interpersonal and communication skills
• Ability to travel to and work at remote sites supporting test integration, commissioning, and training as required
• Must be able to obtain a security clearance

PREFERRED QUALIFICATIONS

• 7+ years of relevant industry experience
• Pursuing a Master’s of Science or PHD in Electrical Engineering, Electronics Engineering Mechanical Engineering, Computer Science or related field
• Experience with firmware integration, vehicle level validation and debugging
• Demonstrated knowledge of regulatory compliance standards
• Familiarity with LabVIEW, TILE, or similar software for test execution and automation
• Familiarity with analytical and modeling tools like SPICE, HFSS, CST, etc.

ABOUT THE TEAM
Connected Warfare is the team at Anduril dedicated to the modernization of the command-and-control systems of U.S. and Allied forces. New technologies and adversaries demand a novel approach to battlefield intelligence, and you will be the driving force behind the integration of cutting-edge edge computing technologies that make that a reality. Such systems inherently require both electrical and mechanical components and we are looking for highly skilled engineers to own the design of electromechanical subassemblies on these tightly integrated products. Your work will not only create new products but also help to change the balance of defense capabilities on a global scale.

WHAT YOU'LL DO:
As a Senior Electromechanical Engineer, you will play a critical, hands-on role in bringing our advanced defense products to life, demonstrating significant ownership and technical leadership. Your responsibilities will include:

• Lead System Integration: Drive the comprehensive integration of power, control, and harnessing subsystems into robust, finished products, ensuring seamless functionality and reliability.
• Robust Hardware Design: Design and develop critical mechanical hardware components, including durable enclosures, innovative electronics packaging solutions, efficient bus bars, and complex cable assemblies built to survive extreme conditions.
• Harnessing Expertise: Deliver conceptual and detailed harness routing schemes, define optimal mounting strategies, and implement best practices for reliable and maintainable electrical interconnects.
• Cross-functional Technical Partnership: Collaborate closely with electrical, software, and mechanical engineers to implement, rigorously test, and validate complex electromechanical systems throughout their lifecycle.
• Collaborative Innovation: Contribute actively within a dynamic, high-performing product development team, fostering an environment of rapid iteration and technical excellence.
• Direct Mission Impact: Travel to field exercises and work directly alongside warfighters, providing critical product support and gathering invaluable feedback for continuous improvement.
• Full Product Lifecycle Ownership: Iterate on your designs from concept to production, partnering with our manufacturing team to ensure efficient documentation, build processes, and successful delivery at scale.

REQUIRED QUALIFICATIONS:

• 5+ years of professional engineering experience specifically in electromechanical integration, hardware design, or systems engineering within a relevant industry (e.g., defense, aerospace, automotive, robotics).
• Demonstrated expertise and a proven track record in successfully integrating electrical components into rugged mechanical assemblies, with examples of past designs.
• Extensive experience with cabling design, wiring harness integration, and managing electromechanical interfaces for products designed for extreme or military-grade use cases.
• High competence with, and fluid application of, engineering first principles across disciplines, including but not limited to: thermal management, structural integrity, material science, power distribution, and signal integrity.
• Proficiency with CAD software and the ability to produce high-quality, manufacturing-ready engineering drawings that adhere to industry standards.
• BS, M.Eng, MS or PhD in an engineering field (e.g., Mechanical Engineering, Electrical Engineering, Electromechanical Engineering, Aerospace Engineering, Mechatronics).

PREFERRED QUALIFICATIONS:

• Experience selecting, specifying, and integrating ruggedized and MIL-spec connectors (e.g., D38999, ITT Cannon, Amphenol).
• Deep familiarity with common electrical interfaces and communication protocols (e.g., USB, CAN, Ethernet, RS-485/232, SPI, I2C).
• Strong understanding and practical experience with EMI shielding, EMC best practices, and robust signal integrity design.
• Competency with 3D CAD harness routing tools (e.g., NX Electrical Routing, SolidWorks Electrical, CATIA Electrical).
• Advanced understanding of enclosure design, material selection, and manufacturing processes for various environmental protection levels.
• Well versed in ingress protection (IP) standards (e.g., IP67, IP68) and practical methods to achieve them in product design.
• Proficiency with Siemens NX and Teamcenter PLM for design and data management.
• Hands-on prototyping experience including machining, shop tools, welding, soldering, and board assembly.
• Practical experience with electrical engineering tools (Oscilloscopes, power supplies, electronic loads, multimeters).
• Experience with power systems, battery management systems, PCBA design, controls, robotics, and/or motor/servo drive systems.

WHY YOU'LL LOVE WORKING HERE:

• Direct & Meaningful Impact: Your engineering prowess will directly contribute to protecting those who serve, working on projects with critical national importance.
• Cutting-Edge Challenges: Engage with complex, first-of-their-kind engineering problems that push the boundaries of current technology.
• High Autonomy & Ownership: Take significant ownership of projects and systems, with the freedom to innovate and see your designs through from concept to deployment.
• Collaborative & Expert Team: Work alongside a highly skilled and passionate group of engineers, fostering a culture of mentorship, knowledge sharing, and mutual support.
• Professional Growth: Opportunities for continuous learning, advanced professional development, and a clear career path within a dynamic and expanding company.

Lumos & Associates is a leading firm specializing in civil engineering, water resources management, and infrastructure projects. We are committed to providing innovative, sustainable solutions that meet the needs of our clients while promoting environmental stewardship. Our team is passionate about enhancing urban stormwater infrastructure and ensuring resilience in communities through effective water resources management. We are looking for an experienced and driven Project Manager with expertise in stormwater project management to join our dynamic team.

We are seeking a detail-oriented and proactive Project Manager to lead, oversee, and coordinate stormwater/water resources infrastructure projects from inception to completion. The ideal candidate will have a strong background in project management and civil engineering principles, hydrologic and hydraulic modeling, preparation of technical drainage studies, stormwater infrastructure design and the development of construction documents, with a focus on ensuring projects are delivered on time, within budget, and in compliance with all regulatory requirements.

As a leadership position within the company, the Project Manager promotes and develops new and repeat business opportunities that are in alignment with Lumos & Associates' strategies and goals.

Responsibilities

• Provide supervision and guidance for overall objectives, critical issues, new concepts, and policy matters within team,
• Consult with Group Manager and Engineering Director concerning unusual project situations and obtain approvals as appropriate.
• Provide leadership in the development of new business and promoting repeat and referral business with existing clients.
• Prepare and review project proposals, qualification statements, promotional materials, and professional services agreements.
• Lead and coordinate project teams, including engineers, designers, and technical staff.
• Develop project scopes, schedules, budgets, and monitor progress to ensure timely completion.
• Serve as the primary point of contact for clients, regulatory agencies, and stakeholders.
• Lead the analysis and preparation of technical drainage reports for diverse projects including open channels, closed conduit systems, drainage master planning, erosion control and water quality improvements, stormwater pump stations, green infrastructure planning and design, and transportation drainage design.
• Oversee the preparation of construction documents for stormwater/water resources infrastructure projects including project management, project design, construction specifications, construction cost estimates, bidding assistance and construction services in compliance with local, state, and federal regulations.
• Perform watershed and stormwater system master planning and develop capital improvement or mitigation projects.
• Conduct project meetings, including client meetings, progress updates, and coordination with contractors and subcontractors.
• Perform hydrologic and hydraulic analysis and ensure design compliance with environmental and engineering standards.
• Conduct regional flood planning, and preparation and review of FEMA flood studies as well as CLOMRs and LOMRs.
• Oversee the preparation of technical documentation and presentations for clients and regulatory bodies.
• Ensure projects comply with environmental regulations and sustainable design practices, including low-impact development (LID) techniques.
• Provide leadership and mentorship to junior engineers and project team members.
• Manage project risks, resolve technical issues, and ensure quality control throughout the project lifecycle.

Requirements

• Bachelor's degree from four-year College or University with emphasis in Civil or Environmental Engineering.
• 8+ years of progressive experience in relevant water resources engineering consulting/project management.
• Registered as a Professional Civil Engineer in Nevada/California/Idaho; ability to obtain Professional Civil Engineering license in resident state within 6 months of hire date.
• Proven expertise in developing and managing new business opportunities and client proposals.
• Proven experience managing stormwater management projects, including design, permitting, and implementation.
• Proficiency in stormwater modeling and design software (e.g., HEC-RAS, HEC-HMS, SWMM, StormCAD, HY-8, AutoCAD, HydroCAD). Experience with advanced H&H modeling software including Infoworks ICM, XP-SWMM, two-dimensional modeling packages is preferred.
• GIS proficiency (ArcGIS or similar).
• Strong knowledge of hydrology and hydraulics principles
• Familiarity with FEMA floodplain mapping, CLOMR/LOMR processes.
• In-depth understanding of local, state, and federal stormwater design standards, regulations, and permitting processes.
• Proven experience successfully building trust, empowering people/teams, and making cross-functional cooperation happen in a highly engaged manner.
• Prior experience in managing a staff (supervise, train, coach, develop, motivate, interview, hire, terminate) and lead by example.
• Valid driver’s license with a clean driving record (3 or fewer demerit points).

Pay Transparency Statement

The compensation range reflects the Company’s reasonable expectation at the time of posting. We consider a number of factors when making individual compensation decisions including, but not limited to, skill sets, experience and training, and other business needs.

Lumos & Associates, a leader in civil engineering, is excited to open a brand-new office in Roseville, California, and we are looking for a skilled Group Manager to manage and grow the Civil Engineering practice in the Sacramento, California area.  The ideal candidate will have solid leadership and problem-solving skills, as well as a strategic mindset to help develop and grow the business. In addition, the candidate will have a proven track record of leading and mentoring design teams on a wide range of infrastructure and environmental projects, including water, wastewater, and stormwater systems, transportation infrastructure, and site development.

About Us:  At Lumos & Associates, we are known for our forward-thinking approach and commitment to excellence in civil engineering. As we expand our presence, we are committed to building a workplace that fosters a positive, engaging, and highly collaborative environment where employees can thrive. We invest in nurturing talent, encouraging professional development, and creating an environment that supports employee well-being. Our focus is on the growth of our business and employees, guided by our five core values: Stay Moving, Dip Down, Own It, Make it Right, and Take Pride.

About the Role:  The Group Manager will lead and grow the Engineering Division across our geographic service regions.  This position will have the opportunity to develop relationships with clients, identify new business through networking opportunities, manage client projects from start to finish, and recruit, hire, and mentor a multidisciplinary team of engineers and designers.

Success in this role comes from being self-motivated and driven to grow a new business, having an entrepreneurial spirit and interest in developing new connections.

About You:

• You are charismatic, friendly, and approachable with clients and colleagues, with a deep appreciation for building long-term, trusted relationships.
• You have an entrepreneurial spirit and insatiable drive to grow and develop business through your networking and project management efforts.
• You are a natural leader who manages a team with the right balance of accountability, empathy, and motivation to guide your team toward high-quality outcomes.
• You thrive in collaborative environments, welcoming diverse perspectives and fostering teamwork to solve complex challenges.
• You lead with respect and integrity, communicating thoughtfully, listening actively, and treating everyone with fairness and dignity.
• You are trusted and trusting, known for your integrity, reliability, and transparency, valuing others' abilities and decisions.
• As a leader, you inspire vision, foster teamwork, encourage innovation, and drive results while encouraging personal and professional growth.
• You empower others by encouraging autonomy, providing meaningful feedback, celebrating achievements, and supporting continuous development

 Key Responsibilities

• Provides leadership in the development of new business and promotes repeat and referral business with existing clients in alignment with company strategies and goals; participates in networking events and business development meetings. This includes reviewing, providing guidance on, and directing responses to SOQ, RFP, and RFQ responses.
• Formulates and recommends engineering policies and programs that guide the organization in maintaining and improving its competitive position and overall value in the market.
• Acts as liaison between division management/subordinate levels, as well as executive/division manager levels to inform personnel of communications, decisions, policies and procedures, and all matters that affect their performance, attitudes, and results.
• Establishes and maintains effective, professional relationships with relevant stakeholders, including clients, government agencies, and allied professionals, especially sub-consultants.
• Manages their group’s backlog and identifies staffing needs.
• Oversees delegation of work and distribution of project load across their group to ensure optimum efficiency and a healthy work/life balance.
• Reviews and approves all fee proposals and scopes of work prepared by their group.
• Oversees the delivery of high-quality projects and services to clients.
• Prepares and presents projects to local authorities (i.e. planning board, city council, and staff review committee meetings).
• Actively communicates business strategy and key results to operations staff. Facilitate regular staff meetings to promote open, transparent, and consistent communication.
• Mentors and coaches staff to achieve optimal job performance. Supports and encourages career development. Promotes positive employee relations and resolves employee issues. Supports team building with positive and open communication.
• Participates in staff selection/interview process. Recruit, hire, and oversee training of engineering staff.
• Other duties and special projects as assigned. 

Requirements

• Bachelor’s degree from a four-year College or University with an emphasis in Civil or Environmental Engineering.
• 10+ years’ proven experience in relevant civil engineering consulting/project management.
• Prior experience in managing teams in civil engineering (supervise, train, coach, develop, motivate, interview, hire, terminate).
• Registered as a Professional Civil Engineer in California.
• Proven expertise in developing and managing new business opportunities and client proposals.
• Demonstrated project management experience; prior experience with municipal infrastructure/public works projects is a plus.
• Computer proficient with advanced knowledge of Microsoft Office products (Word/Excel/Outlook).
• Collaborative team player able to lead strategy with persistent execution.
• Self-starter and hungry to lead initiatives that will grow and expand a business’s footprint in a dynamic, fast-paced and deadline driven environment.
• Outstanding results-oriented track record with excellent time/project management. Ability to apply cost/benefits analysis to requested projects.
• Proven experience successfully building trust, empowering people/teams, and making cross-functional cooperation happen in a highly engaged manner.
• Valid driver’s license and driving record with 3 or less demerit points.

WHAT YOU’LL DO 

• Create mechanisms (optical focus, shutters, filter wheels, etc.) for space payloads ranging from small cameras to large telescopes that survive the launch and space environments 

• Review literature and parallel applications to inform architecture and selection 

• Run hand calculations to size actuators and components 

• Select, procure, and rigorously test (e.g., environmental, accelerated life) actuators and sensors; this includes architecting test plans, overseeing test setup development, characterizing performance, and reporting findings to inform integration 

• Own hardware design from concept to launch, intelligently pacing design maturity with a holistic program view 

• Use first principles for every decision and continuously simplify designs 

• Communicate pros/cons of system architectures with respect to mechanism design and performance 

• Lead subsystem design reviews and provide clear status updates on timelines and technical progress 

• Build prototypes, analyze failures, and transition successful designs to flight hardware and low-rate production 

• Create excellent technical documentation (presentations, test plans/reports, procedures, drawings, specifications, etc.) 

• Mentor junior engineers 

REQUIRED QUALIFICATIONS 

• BS or higher degree in engineering or hard science 

• Ability to obtain and hold U.S. Top Secret security clearance 

• 5+ years of mechanism design experience with space hardware and demonstrated track record of success fielding flight hardware 

• Mechatronics experience: review datasheets, select components, interface with actuators and sensors, architect and prototype control loops, and facilitate integration into higher level mechanical/electrical assemblies 

• Coding experience in Python, MATLAB, or C++ for analytical models, data acquisition/automation 

• Experience using microcontrollers for prototyping such as Arduino, RasPi, STM, or other  

• Experience with high-reliability design, athermalization, and vibration/shock resistance 

• Experience with mechanical alignments, kinematic mounting, and qualification test campaigns 

• Excellent attention to detail, highly motivated, self-starting, and autonomous 

• Organized with ability to define scope and requirements for ambiguous problems 

PREFERRED QUALIFICATIONS 

• Hands-on technical project experience (academic, extracurricular, or personal) 

• Experience in related industries 

• Structural or thermal testing experience  

• CAD proficiency and ability to create engineering drawings meeting industry standards 

• Hands-on fabrication and assembly skills with hand tools, mill, lathe, etc. 

• Strong fundamentals in optics, heat transfer, statics, solid mechanics, and materials 

Vast is looking for a Staff Acoustic Engineer, reporting to the Director, Life Support Systems to support the development of the systems that will be required for the design and build of artificial-gravity human-rated space stations.

This will be a full-time, exempt position located in our Long Beach location. 

Responsibilities: 

• Perform acoustic and aeroacoustic modeling of spacecraft systems and habitable environments
• Identify and characterize noise sources including pumps, fans, compressors, valves, and fluid systems
• Analyze sound propagation and transmission paths within pressurized spacecraft modules
• Develop predictive models for cabin acoustic levels and sound distribution
• Perform computational aeroacoustic (CAA) analysis for fluid-driven noise sources
• Define acoustic requirements and performance targets for spacecraft subsystems
• Lead various design teams in developing noise mitigation strategies, including source reduction, acoustic treatments, and system layout changes
• Conduct acoustic testing and measurements using microphones, arrays, and specialized instrumentation
• Process and interpret acoustic data to validate analytical models and guide design improvements
• Support integrated vehicle testing and verification of acoustic requirements
• Collaborate with ECLSS, fluids, thermal, avionics, structures, and systems teams to improve acoustic performance across the station

Minimum Qualifications:

• Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, Acoustics, or a related field
• 5+ years of experience in acoustics, aeroacoustics, or environmental noise analysis
• Strong background in acoustic theory, wave propagation, and sound measurement
• Experience modeling and analyzing airborne noise and acoustic environments
• Experience with acoustic instrumentation and data analysis
• Experience in design of acoustic mitigation components. Resonators, acoustic damping materials
• Proficiency in MATLAB, Python, or similar tools for signal processing and acoustic analysis
• Experience modeling and analyzing airborne noise and acoustic environments
• Experience with acoustic instrumentation and data analysis
• Experience in design of acoustic mitigation components. Resonators, acoustic damping materials
• Proficiency in MATLAB, Python, or similar tools for signal processing and acoustic analysis

Preferred Skills & Experience:

• Master’s or PhD in Acoustics, Aeroacoustics, Aerospace Engineering, or Mechanical Engineering
  Experience with computational aeroacoustics (CAA) or acoustic CFD methods
• Experience with tools such as Actran, LMS Virtual.Lab, VA One, STAR-CCM+, Fluent, OpenFOAM, or similar
• Experience with cabin acoustics, habitable environments, or environmental noise control
• Experience working with fans, pumps, ducting, ventilation systems, or fluid-generated noise
• Experience performing acoustic test campaigns and measurement programs
• Familiarity with spacecraft, aircraft, or other complex integrated systems

Additional Requirements:

• Willingness to work overtime, or weekends to support critical mission milestones
• Ability to lift up to 25lbs unassisted
• Specific certifications, as appropriate

Anduril's Reliability Engineering organization is seeking an experienced Reliability Engineer to join our team in support of our Advanced Effects product line. The Reliability Engineering team collaborates with our broader Engineering organization to ensure our products meet or exceed mission performance requirements, withstand challenging environmental conditions, and satisfy all customer specifications. We develop and implement cutting-edge Reliability processes and methodologies to secure scalable, long-term business success.

As a Reliability Engineer at Anduril, you will leverage your extensive knowledge of advanced Reliability tools and methodologies to drive excellence in our Reliability programs. You will support the Systems, Hardware, & Software Engineering teams across the product development lifecycle by guiding Failure Modes & Effects Analysis, predictive analysis, qualification test planning, field performance monitoring, and root cause & corrective action activities for your product(s). The right person for this role has knowledge of design and development with a reliability focus on unmanned air vehicles or weapon systems, as well as exposure to test, analysis, manufacturing, and continuous improvement in a production environment. If you are someone who has hands-on experience throughout the new product development life cycle from concept to customer delivery, loves to build world-class Reliability processes, can work efficiently across multi disciplinary teams, and be accountable for results, then this role is for you.

WHAT YOU'LL DO

REQUIRED QUALIFICATIONS

PREFERRED QUALIFICATIONS

WHAT YOU’LL DO

• Create and maintain electrical system test strategy and test plans for various Anduril Electronics Warfare (EW) and Radio Frequency (RF) products.
• Characterize wireless communication systems and devices.
• Analyze and drive coverage and analysis of failures observed in integration, characterization, and system level testing.
• Integration testing of subassemblies and systems including RF and digital hardware, firmware, embedded software, and application software.
• Facilitate electrical system performance, calibration, durability, and environmental testing of developmental components and systems per test plan.
• Develop and maintain test standards, design and develop test equipment, or procuring and handling purchased test capital equipment to support test readiness.
• Support and perform field testing and act as a liaison to conduct ground and flight testing.
• Leverage data analysis and existing tools to reproduce and characterize failures.
• Automate tests to enhance test coverage and ensure reproducibility and repeatability.

REQUIRED QUALIFICATIONS

• 8+ years of relevant industry experience with emphasis on hardware, software, and / or system validation and verification testing.
• Bachelor’s degree in Electrical, Electronics, Computer Engineering, or related fields
• Skilled with test equipment like multimeters, oscilloscopes, spectrum analyzers, signal generators, and vector network analyzers.
• Familiar with Linux applications like command line (terminal) interface, creating and executing shell scripts, debug utilities, and general file system navigation.
• Familiar with programming languages like Python or Matlab to perform data parsing, data analysis, and test automation.
• Strong root cause analysis skills.
• Ability to travel 50% and work at remote sites supporting test integration, commissioning.
• Excellent written, verbal, interpersonal, communication, and organization skills.
• Currently possesses and is able to maintain an active U.S. Secret security clearance.

PREFERRED QUALIFICATIONS

• Familiar with wireless communication protocols and test methods.
• Familiar with military and spectrum regulatory standards and test methods.

What You'll Do

• Develop, implement, and execute comprehensive validation and qualification test plans for electromechanical rotary, linear, and geared actuators.
• Design, develop, and execute environmental test profiles and plans for actuators, including high/low temperature, thermal cycling, vibration, and shock testing, often adhering to MIL-STD-810 standards and developing custom test methods.
• Design robust test fixtures using NX CAD, considering manufacturability via processes like CNC machining, 3D printing, and waterjet cutting, and oversee their fabrication and assembly.
• Perform rigorous multi-level testing, ranging from component (electric motor, geartrain) and actuator levels, up to integrated system level testing.
• Analyze complex test data, generate clear and concise test reports, and present findings to cross-functional engineering teams.
• Collaborate closely with Design Engineers and cross-functional teams (e.g., manufacturing, quality, software) to validate and refine actuator designs, clearly communicating technical issues and recommendations to diverse audiences
• Investigate root cause of failures through detailed analysis of performance data and some destructive testing, applying a basic understanding of electrical components for troubleshooting, to drive actuator design improvements.
• Create and execute Design Validation Plans (DVPs) and test methods to rigorously validate performance requirements, including preparing for and conducting qualification testing.

What You'll Bring

• Bachelor's degree in Mechanical Engineering, Electrical Engineering, Robotics, or a related technical field, or equivalent practical experience.
• 2+ years of hands-on experience with LabVIEW and other data acquisition (DAQ) systems for test automation and data collection.
• 2+ years of experience in physical testing and analysis of mechanical, electrical, and electromechanical systems, with at least 1 year specifically focused on electric motors or electromechanical actuators.
• Proficiency with dynamometer testing and associated instrumentation (e.g., torque transducers, oscilloscopes, etc.).
• Working understanding of servo control principles (torque, speed, and position control), and familiarity with motor controllers and embedded control systems.
• Familiarity with various communication protocols (e.g., CAN FD, RS232, RS485).
• Strong experience with environmental testing methodologies (e.g., high/low temperature, thermal cycling, vibration, shock) and familiarity with MIL-STD-810 standards.
• Proficiency in CAD software, specifically NX, for test fixture design, with an understanding of design for manufacturability for various methods (e.g., CNC, 3D printing).
• Proven ability to perform root cause analysis and apply a basic understanding of electrical components for troubleshooting.

Nice to Have

• Experience with Python, MATLAB, C/C++, or other scripting languages for data analysis and test automation.
• Familiarity with project and documentation management tools like Jira and Confluence.
• Experience in the aerospace, defense, or robotics industry.
• A strong sense of urgency and adaptability in a fast-paced, rapidly evolving environment.

ABOUT THE TEAM

The Reliability Engineering team partners across Anduril's engineering, manufacturing, and operations organizations to ensure our autonomous systems survive real-world conditions and deliver consistent performance for our customers. Our mandate spans the complete product lifecycle - from early concept design through production scale-up and fielded operations. We use data, statistical methods, and engineering analysis to forecast how our systems will perform over time and influence design decisions, including part selection, redundancy strategies, and maintenance approaches. We establish tailored reliability frameworks by program and partner with Quality to drive design robustness, failure prevention, and rapid response to issues in the field.

ABOUT THE JOB

We are seeking an experienced Reliability Engineer to join our rapidly growing team in Costa Mesa, CA, driving reliability for our Space programs & applications. This is a hands-on role focused on embedding reliability into early product architecture and detailed design - from early concept trade studies through design validation and launch integration. You'll be the reliability champion throughout the design and development process, working closely with mechanical, electrical, and software engineering teams to ensure designs are robust. Your responsibilities will include conducting reliability predictions and allocations during architecture trades, leading design FMEAs and fault tree analyses to identify and mitigate failure modes, developing and executing design verification test plans, performing stress-derating analysis and parts selection reviews, and assessing design changes for reliability impact throughout the development cycle. The right person for this role brings deep technical knowledge of hardware reliability and failure mechanisms, has practical experience on product development programs, and can engage credibly with design engineers and Anduril's subcontractors on technical details while maintaining focus on system-level reliability outcomes. This role demands someone who can embed early in design cycles, influence engineering decisions with data and analysis, and take ownership of reliability outcomes as designs mature from concept to launch readiness.

WHAT YOU'LL DO

• Support and review system block diagrams, interface control documents, and schematics for compliance against reliability requirements and concept of operations.
• Lead Failure Modes & Effects Analysis efforts and collaborate with cross-functional Engineering teams to implement product improvements for Reliability.
• Perform predictive reliability analysis to calculate probability of loss of control, loss of asset, and MTTF/MTBF utilizing Anduril requirements, specifications, and relevant industry standards (i.e. MIL-HDBK-217Plus).
• Develop Qualification Test plans to ensure appropriate requirements coverage, and work with Test Engineering to fixture, instrument, and execute test campaigns.
• Perform Weibull analysis utilizing data from Qualification campaigns and from fielded assets.
• Partner with Quality and Manufacturing Engineering to ensure design specifications and requirements are embedded in the manufacturing process and ensure acceptance test gates are validated against requirements.
• Use data analysis techniques to highlight key problem areas during test, and drive root cause analysis & corrective action implementation.
• Develop and implement Reliability processes for the business to improve and streamline our Design, Manufacturing, and Operations efforts for rapid development.
• Support Development Milestone Reviews through identification of appropriate entry and exit criteria, and work with Quality Engineering to guide the hand off process to production.

REQUIRED QUALIFICATIONS

• Minimum of 8 years experience as a Reliability Engineer or Design/Development Engineer
• B.S. Degree in Mechanical Engineering, Aerospace Engineering, Systems Engineering, or equivalent technical discipline
• Experience with safety-critical hardware & software systems in the defense or aerospace industry, with a preference for experience with Space systems
• Experience or familiarity with MIL-STD-810, MIL-HDBK-217, MIL-STD-461, MIL-STD-516C, and MIL-STD-1629
• Experience setting up a Reliability Engineering framework for a product or program, including support of production testing, field testing, data acquisition, and data analysis
• Expertise in reliability analysis techniques, including FMEA/FMECA, predictive modeling, Weibull analysis, and Fault Tree Analysis
• Experience with generating qualification testing requirements and executing tests to proactively characterize product behavior and performance
• Failure investigation/analysis experience with proven track record of solving problems and preventing reoccurrence
• Design Review Experience (PDR, CDR, MRR) and confidence in presentation skills across all levels of leadership
• Eligibility to obtain/maintain a U.S. security clearance, as required

PREFERRED QUALIFICATIONS

• M.S. Degree in Mechanical Engineering, Aerospace Engineering, Systems Engineering, or equivalent technical discipline
• Experience with MIL-HDBK-217 Plus, MIL-HDBK-472, MIL-STD-1916, NPR 7120, NASA-STD-8729.1, NPR 8705.4
• Experience with Manufacturing Readiness Level (MRL) Assessments, Manufacturing Review Board (MRB), Quality Inspection, Tooling, or Calibration
• Experience with risk management, change control/change management reviews, and software/firmware HITL/SITL
• Experience with HALT (Highly Accelerated Life Testing), HASS (Highly Accelerated Stress Screening), Environmental Testing, and/or Mechanical Testing
• Technical writing experience developing requirements, standards, specifications, user guides, and policies

ABOUT THE TEAM

Anduril’s Manufacturing Technology, Maritime Team is seeking a Tooling and Equipment Design Engineer to join our team in Costa Mesa, CA. The Maritime Manufacturing Technology Team is responsible for rapidly developing and implementing manufacturing technologies and processes for cutting-edge defense hardware, including deployable static and moving surface, undersea and sea to air vehicles and scaling these products in our new manufacturing facilities.

ABOUT THE JOB

As a Tooling and Equipment Design Engineer, you will be developing tooling, equipment, and layouts to support manufacturing processes, the production system, movement simulations and digital twins of the production environment in order to drive to efficient, rapid, on-time production and start-up of the new production facilities for maritime vehicles. The right person for this role has designed tooling and equipment solutions enabling production systems and manufacturing models of the work environment for a variety of product lines, groups, or businesses and integrated with both internal and external customers. If you are someone who wants to develop innovative, adaptive, flexible, creative approaches to manufacturing production systems and develop unified solutions for lots of stakeholders then this role is for you.

WHAT YOU’LL DO

• Design tooling and equipment that integrates with factory manufacturing equipment, NC machinery, and robotic welding equipment to enable processing systems for supporting factory development and the future production system. You will utilize computer aided design, simulation, and computer graphics to enable lean manufacturing principles, integrated metrology and visual management, including technologies, tools and processes to improve production flow while enhancing product performance, space allocation and resource requirements across programs and products.
• Support tooling and equipment integration, commissioning, and certification in prototype and production development
• Develop, review, and validate tooling and equipment concepts to meet performance requirements
• Team with manufacturing technology, facilities, and suppliers to create, source, and assess potential equipment and tooling to solve for production needs
• Be on the floor communicating and integrating with fellow engineers and manufacturing personnel to perpetuate a cohesive mission-oriented culture
• Drive collaboration with manufacturing technology, product design, manufacturing engineering, operations, facilities and construction, environmental safety & health, and finance to deliver creative and effective production system designs, as well as external vendors supporting the design, construction, and commissioning of new facilities

REQUIRED QUALIFICATIONS

• 5+ years of experience as a designer and developer of tooling, equipment and processes for manufacturing technology development, simulation modeling, digital thread development and/or production/process engineering
• Technology development and implementation experience in equipment and tooling for large scale manufacturing
• Ability to work hands-on in a manufacturing environment, next to operations and manufacturing engineering to understand and optimize the production system
• Ability to travel up to 50% of the time
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Experience designing, manufacturing, procuring, installing, and maintaining tooling, fixturing, and manufacturing equipment and tooling
• Process improvement, including justification of return on investment for process or operational changes
• Application of lean manufacturing and linear flow principles in a production environment
• Automation development for manufacturing processes in assembly, integration, test, and finishing operations
• Design and construction of facilities, tooling, fixturing and equipment for large scale production systems

About the Role

We are seeking a Modeling and Simulation Engineer to develop and validate software tools for analyzing sensor and vehicle configurations in autonomous systems. This role involves creating accurate models of sensors and vehicles to evaluate technical capabilities and ensure simulations are representative of real-world hardware.
The ideal candidate will have experience in sensor modeling, simulation frameworks, and building software tools for data visualization and analysis. This role is critical in bridging simulation and physical deployment to optimize sensor and vehicle configurations.

What You’ll Do

• Sensor and Vehicle Modeling: Develop accurate models of sensors (e.g., LiDAR, cameras, IMUs) and vehicles to simulate performance under various configurations.
• Simulation Validation: Ensure simulated sensors and platforms closely match physical hardware performance in real-world conditions.
• Software Tooling: Build and maintain software tools for visualizing, analyzing, and optimizing sensor and vehicle configurations.
• Performance Analysis: Conduct technical evaluations of sensor configurations to assess range, accuracy, and other performance metrics.
• Optimization: Explore trade-offs in sensor placement, platform design, and environmental factors to maximize system performance.
• Cross-Functional Collaboration: Work closely with perception, autonomy, and hardware teams to ensure simulation results inform real-world designs.
• Data Visualization: Develop intuitive visualization tools to present complex simulation results to technical and non-technical stakeholders.
• Iterative Improvement: Continuously refine models and tools based on feedback from physical testing and deployed systems.

Required Qualifications

• Education: Bachelor’s, Master’s, or Ph.D. in Robotics, Computer Science, Electrical Engineering, or a related field.
• Sensor Modeling Experience: Proven experience modeling sensors like LiDAR, cameras, IMUs, and GPS in simulation.
• Simulation Tools: Proficiency with simulation frameworks such as Unreal Engine.
• Software Development: Strong programming skills in C++ and Python for building simulation tools and analysis pipelines.
• Data Visualization: Experience creating tools or dashboards for visualizing simulation results.
• Physics-Based Modeling: Familiarity with physics-based simulation techniques for accurate environmental and sensor modeling.
• Systems Integration: Ability to validate and align simulation models with real-world hardware and systems.
• Analytical Skills: Strong ability to analyze and interpret simulation data for performance evaluation.

Preferred Qualifications

• Real-World Hardware Experience: Hands-on experience with physical sensors and understanding of their operational characteristics.
• Optimization Techniques: Knowledge of optimization algorithms for sensor placement or system design.
• Machine Learning: Familiarity with AI/ML techniques for improving simulation fidelity or analyzing sensor data.
• Advanced Visualization: Experience with tools like Matplotlib, Plotly, or 3D visualization libraries.
• Embedded Systems: Understanding of hardware constraints and system-level trade-offs in sensor integration.
• Security Clearance: Active U.S. Secret clearance is a plus.

Why Join Us?

This is a unique opportunity to shape the future of autonomous systems by bridging simulation and real-world performance. Your work will ensure our sensor and vehicle configurations are optimized for mission-critical applications, driving innovation in robotics and autonomous technology.
Apply now to help us build accurate and impactful simulation tools for next-generation autonomous systems!

WHAT YOU’LL DO

• Provide the engineering expertise to design, fabricate and integrate harnesses systems and represent the harness discipline on a project
• Investigate, plan, design and develop harnesses to meet various technical requirements
• Research, select and procure appropriate connectors, back-shells, contacts, wire, shielding, and cable construction for the product to meet appropriate environmental requirements
• Develop and generate harness system block diagrams and wire diagrams to release for production
• Participate in design reviews and provide input to identify issues and drive design choices
• Prepare harness assembly instructions and test procedures, incorporating your knowledge of industry standards and best practices
• Provide guidance to the electrical team in identifying electrical system requirements given input from internal and external stakeholders including engineering (mechanical, electrical, software), product management, quality and compliance
• Work in a fast-paced environment supporting new developments, active deployments, and customer operated hardware
• Concurrently manage involvement in multiple projects at various stages

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering, Mechanical Engineering, or equivalent
• 3+ years hands-on experience designing electrical harnessing for rugged commercial, industrial, aerospace, or military applications
• Experience working directly with harness manufacturers to deliver high quality, high reliability products
• Familiarity with common electrical bus interfaces (CAN, Ethernet, RS422, RS232, 1553)
• Familiar with existing applicable harness standards as well as MIL-STD requirements
• Able to apply knowledge of SWaP for power, network and communications systems and designs
• Experience reading wire block interconnect diagrams and wire diagrams
• Exceptional organization and communication skills (both written and oral)
• Must be eligible to receive a US Security Clearance

PREFERRED QUALIFICATIONS

• Build 3D routed harness data files applying NX Cabling and Siemens Capital Harness
• Experience with or proficient in 3D CAD wire harness routing, such as (NX, Siemens Capital, CATIA, CREO)
• Able to read and generate formboard drawings in 2D CAD for production

ABOUT THE TEAM

A Connected Warfare SRE - System Deployment deploys and maintains Anduril’s hardware and software to deliver mission critical capabilities to our customers. System Deployment Engineers work in complex environments with shared environmental responsibility with our customers. They navigate the ambiguous landscape with efficiency to deliver the right customer outcomes. 

WHAT YOU’LL DO

• Enable network expansion through installation of both hardware and software in support of Anduril customer missions
• Troubleshoot complex installation issues, driving short term resolution and identifying long term solutions
• Be familiar with Anduril system capabilities as a data and applications platform and be able to educate customers
• Participate in customer demonstrations and exercises
• Work with site reliability engineers to provide and refine requirements for tooling and systems to support customer outcomes
• Work with mission software engineers to ensure supportability of custom system integrations
• Identify and document opportunities for system improvements

REQUIRED QUALIFICATIONS:

• Active US TS security clearance with SCI eligibility
• STEM degree or equivalent technical experience
• Experience delivering and maintaining systems that run on air-gapped and security-hardened networks
• Ability to understand, debug, and modify software written languages such as Go, Python, Rust, or C++
• Willingness to travel 40%-50%
• Minimum 4 years of operations and engineering experience

PREFERRED QUALIFICATIONS

• Comfort with operating independently in isolated, austere, and dynamic environments while being the sole representative of Anduril
• Experience in the technical, programmatic, and operational challenges of developing and deploying autonomous weapon systems across network enclaves
• Extensive hands-on field operations and systems administration experience
• Administration experience in networking, storage, and operating systems
• Demonstrated ability to solve problems in ambiguous environments to enable customer mission success
• Experience working with cross-functional engineering teams and external customers
• Experience performing data-driven root cause analysis on complex systems
• Excellent written and verbal communication skills
• Hold a DoD 8570 IAT Level 2+ certification
• Technical expertise and demonstrated performance in one or more of the following areas: networking, cloud technologies, hardware design, and/or cybersecurity

ABOUT THE TEAM

Anduril’s Space Manufacturing team is seeking an experienced and dynamic Senior Space Vehicle Electrical Integration and Test Engineer to join our Space Assembly, Integration, and Test team. The Space Manufacturing team is responsible for assembly, integration, and test of ground support equipment, PCBA, unit-level, and integrated systems that are vital for our aerospace and defense operations. Your expertise will help ensure that our products meet the highest standards of quality and reliability at Anduril.

As the Senior Space Vehicle Electrical Integration and Test Engineer, you will lead satellite integration and testing campaigns, focusing on electrical systems such as avionics and power payloads, and harness wiring for a specific program. Your responsibilities include developing integration plans and procedures, resolving test anomalies, managing test campaign. schedule, and conducting environmental tests (e.g, TVAC, shock, vibration, EMI/EMC). The role requires collaboration with cross-functional engineering teams and expertise in space systems. This position offers ownership of mission-critical projects, opportunities to work with cutting-edge technology and develop processes to ensure successful integration and test of space systems. Offers career growth in a dynamic, fast-paced environment.

WHAT YOU’LL DO

• Lead end-to-end integration and test (I&T) campaigns for space vehicles, including electrical systems such as avionics, power payloads, and harness wiring.
• Develop and implement integration and test plans, along with associated operational procedures.
• Manage schedules and timelines for all space vehicle I&T operations to meet project deliverables.
• Diagnose and resolve anomalies or non-conformances encountered during integration and testing processes.
• Conduct environmental test campaigns, including thermal vacuum (TVAC), shock, vibration, EMI/EMC, and acoustics testing.
• Utilize and modify test scripts for test automation, diagnostics, and troubleshooting during space vehicle testing.
• Operate and maintain test equipment such as radio test racks, and bus control test racks for space vehicle test campaign.
• Collaborate with cross-functional teams, including systems, thermal, mechanical, electrical, firmware, and software engineers, to ensure integration and test success..
• Contribute to the development and refinement of I&T processes for the growing Space AI&T team, with opportunities to expand into mechanical and optical integration tasks.

REQUIRED QUALIFICATIONS

• Minimum Bachelor’s degree in Electrical Engineering, Aerospace Engineering, System Engineering, or a similar field.
• At least 8+ years of experience in. relevant field, preferably space and satellite manufacturing, systems engineering, or design of electrical hardware.
• Proven experience leading large-scale space vehicle I&T campaigns, including avionics, power systems, and harness wiring.
• Expertise in developing integration and test plans with associated procedures.
• Strong ability to troubleshoot and resolve anomalies/non-conformances during integration and testing.
• Hands-on experience with environmental test campaigns (e.g., TVAC, shock, vibration, EMI/EMC, acoustics).
• Proficiency in Python scripting for test automation and diagnostics.
• Familiarity with test equipment for testing radio and bus electronics
• Experience working with classified systems, including performing keying operations.
• Demonstrated experience utilizing MES/ERP/MRP systems for tracking and managing integration tasks.
• Active security clearance or ability to obtain a security clearance

PREFERRED QUALIFICATIONS

• Background in testing and integrating electro-optical (EO) and infrared (IR) payloads or instruments.
• Familiarity with integrating space vehicles and payloads at launch sites, including pre-launch checkouts and troubleshooting.
• Ability to use CAD tools for reviewing or assisting with design modifications related to integration processes.
• Strong understanding of industry standards for shock, vibration, acoustics, TVAC, and EMI/EMC testing.
• Advanced experience with handling secure systems and classified operations beyond baseline keying activities.
• Familiarity with scaling integration and test processes for companies that build multiple satellites at once
• History of leading cross-functional engineering teams across hardware, software, thermal, mechanical, and structural disciplines.
• Previous involvement in the preparation and integration of satellites for launch and mission finalization.
• Advanced ability to develop or extensively modify Python test scripts for automation and diagnostics.
• Experience working in fast-paced aerospace companies or startups, showcasing adaptability and innovative problem-solving skills.

ABOUT THE TEAM

Anduril’s Manufacturing Technology, Maritime Team is seeking an Equipment and Tooling Design Engineer to join our team. The Maritime Manufacturing Technology Team is responsible for rapidly developing and implementing manufacturing technologies and processes for cutting-edge defense hardware, including deployable static and moving surface, undersea and sea to air vehicles and scaling these products in our new manufacturing facilities.

ABOUT THE JOB

As the Equipment and Tooling Engineer, Maritime, you will be designing and assisting in the development in next generation equipment and tooling as well as the layouts to support manufacturing processes, the production system, movement simulations and digital twins of the production environment in order to drive to efficient, rapid, on-time production and start-up of the new production line for maritime vehicles. The right person for this role has designed manufacturing equipment, tools, technologies and practices for creating production systems and manufacturing models of the work environment for a variety of product lines, groups, or businesses and integrated with both internal and external customers. If you are someone who wants to develop innovative, adaptive, flexible, creative approaches to manufacturing production systems and develop unified solutions for lots of stakeholders then this role is for you.

WHAT YOU’LL DO

• Design and create factory layouts and discreet designs incorporating next generation movement, holding and processing systems for supporting factory development and the future production system, using digital thread, computer aided design, simulation, and computer graphics to enable lean manufacturing principles, integrated metrology and visual management, including technologies, tools and processes to improve production flow while enhancing product performance, space allocation and resource requirements across programs and products.
• Question requirements in production system design, and facility creation to ensure the most cost- and schedule-effective solutions for our factories that meets the needs of our products.
• Support design, development, construction, commissioning and start-up of the production systems at new factory sites, ensuring successful delivery of the factory and products off the line.
• Provide support on product manufacturing processes, material flow and new technologies. Buy down risk to meet production performance and timelines in new facilities.
• Lead hands-on: set an example and expedite project completion
• Drive collaboration with manufacturing technology, product design, manufacturing engineering, operations, facilities and construction, environmental safety & health, and finance to deliver creative and effective production system designs, as well as external vendors supporting the design, construction, and commissioning of new facilities

REQUIRED QUALIFICATIONS

• 5+ years of experience as a designer and technology developer of tools, tooling, equipment and processes for manufacturing technology development, simulation modeling, digital thread development and/or production/process engineering.
• Technology development and implementation experience in facilities, equipment and tooling for large scale manufacturing.
• Ability to work hands-on in a manufacturing environment, next to operations and manufacturing engineering to understand and optimize the production system.
• Must be a U.S. Person due to required access to U.S. export controlled information or facilities.

PREFERRED QUALIFICATIONS

• Prior work with architecture and infrastructure engineering partners and/or general contractors to build, improve or modify production facilities.
• Process improvement, including justification of return on investment for process or operational changes.
• Application of lean manufacturing and linear flow principles in a production environment.
• Automation development for manufacturing processes in assembly, integration, test, and finishing operations.
• Design and construction of facilities, tooling, fixturing and equipment for large scale production systems.

WHAT YOU’LL DO

• Design, test, and validation of Battery Management Systems (BMS) for our autonomous vehicles.
• Vehicle-level integrations and complete lifecycle design from concept through production.
• Full cycle PCB design including collecting requirements, schematic design, component selection, supervision or completion of layout, bring-up, test, debug and integration with the system..
• Develop system interconnect diagrams and define wire harnesses that connect electronic equipment.
• Conduct peer-level and cross-discipline design reviews
• Build up and test of engine system components through lab, ground, and flight tests
• Root cause analysis in support of field operations

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent, with 5+ years of experience designing, testing, and troubleshooting complex board designs
• Strong background in circuit design, including components, and mixed-signals design.
• Experience with sensor integration.
• Design experience in UAS, power electronics, converter design, or powertrain.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with standard interfaces such as CAN, I2C, SPI, etc.
• Comfortable with a variety of electronic CAD tools (Altium preferred, Eagle and others acceptable)
• Experience in EMI testing.
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Performed environmental testing in previous positions for military and/or commercial industry.
• Previous experience working on BMS.
• Knowledge and test execution per MIL-STD-810 and/or MIL-STD-461

ABOUT THE TEAM
Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century’s most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril’s family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a real-time, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years.

Anduril’s Reliability & System Safety Engineering organization is seeking a System Safety Engineer to join our Air Dominance & Strike team. The Reliability & System Safety Engineering team works with our broader Engineering team to ensure our products are safe and meet all mission performance, environmental conditions, and customer requirements. We develop cutting-edge Reliability & System Safety processes and methods to secure scalable, long-term business success.

As a System Safety Engineer at Anduril, you will leverage your extensive knowledge of advanced Reliability & System Safety tools and methodologies to drive excellence in our safety processes. You will support the Reliability Engineering, Systems Engineering, and Hardware & Software development teams across the product development lifecycle by guiding Functional Hazard Analysis, Fault Trees, System Safety Assessments, and Hazard Management and Hazard Mitigation activities for your product(s). The right person for this role has knowledge of design and development with a safety focus on aircraft systems, as well as exposure to test, analysis, manufacturing, and continuous improvement in a production environment. If you are someone who has hands-on experience throughout the new product development life cycle from concept to customer delivery, loves to build world-class Reliability and Safety processes, can work efficiently across multi disciplinary teams, and be accountable for results, then this role is for you.

WHAT YOU'LL DO

REQUIRED QUALIFICATIONS

PREFERRED QUALIFICATIONS

ABOUT THE TEAM

Connected Warfare is the team at Anduril dedicated to the modernization of the command and control systems of U.S. and Allied forces. You will be a driving force behind the integration of cutting-edge edge compute and communications technologies that make that approach a reality. 

ABOUT THE JOB

Electrical Test Engineer, Power Systems 

Join our trailblazing team as an Electrical System Integration and Test Engineer, where you'll be the architect of cutting-edge test systems and HITLs (Hardware in the loop) for Anduril's electronic marvels for high and low power ground system applications. In this role, you'll collaborate with the best and brightest, harnessing your expertise to unveil and bridge test coverage gaps with masterful precision. You'll not only own the design but also drive the delivery of both hardware and software test solutions. We're on the hunt for a visionary Power System Test Design Engineer with a history of crafting impeccable turnkey test solutions for electronics, along with a robust background in hardware, software, integration, and sustainment. Propel your career forward with us, where your contributions will redefine industry standards and elevate our products to the pinnacle of technological excellence.

WHAT YOU’LL DO

• Create, maintain electrical system test strategy, and test plans for Ground Control products.
• Develop test procedures defining specific test setup requirements and instructions based on power quality specifications and industry standards.
• Schedule and execute test plans independently and collaborate with related test/validation/design engineers/project managers as necessary.
• Facilitate electrical system performance and characterization testing of developmental as well as future production hardware per test plan
• Develop custom test fixtures and test racks as necessary to capture desired test results
• Post-process test data with Excel, Mathcad or other preferred programs. Write comprehensive test report covering all related information such as detailed equipment lists and specifications, test setup, test procedure and be able to produce meaningful plots from the measured results
• Act as a liaison to conduct offsite testing and provide directions to lab personnel in setting up and executing validation tests.
• Leverage data analysis and existing tools to reproduce and characterize failures.
• Analyze and drive coverage and analysis of failures observed in integration and system level integration testing.

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Electrical/Electronics, Computer, Mechanical Engineering, or related fields
• 4+ years of relevant industry experience with emphasis on hardware validation and verification testing.
• Familiarity with hardware development life cycle, reliability, and compliance testing.
• Familiarity with high voltage safety protocols and practices for both AC and DC voltages
• General understanding of engineering concepts, principles, and theory with technical experience demonstrating the application of those concepts while ensuring safety and regulatory compliance.
• Familiarity with electronics test equipment such as power supplies, electronic loads, oscilloscope, function generators, data acquisition, power analyzers and measurement sensors.
• Familiarity with environmental testing such as MIL-STD-810 and MIL-STD-461
• Strong root cause analysis skills.
• Excellent written, verbal, interpersonal and communication skills.
• Ability to travel to and work at remote sites supporting test integration, commissioning and training as required.
• Eligible to obtain and maintain an active U.S. Top Secret security clearance

PREFERRED QUALIFICATIONS

• 4+ years of relevant industry experience
• Familiarity with Python and/or MATLAB for data parsing and data visualization.
• Knowledge of high complexity wiring harness design, build, and test best practices
• Digital Bus/Network Communication Experience: CAN, UDP, Modbus, RS485, Serial, SNMP
• Experience with firmware integration, vehicle level validation and debugging.
• Demonstrated knowledge of regulatory compliance standards.

ABOUT THE ROLE

Anduril’s Space Manufacturing team is seeking a Senior Manufacturing Engineer to join our team. The Space Manufacturing team is responsible for assembly, integration, and test of ground support equipment, PCBA, unit-level, and integrated systems that are vital for our aerospace and defense operations. Your expertise will help ensure that our products meet the highest standards of quality and reliability at Anduril.

As a Senior Manufacturing Engineer on our Space team, you will be a technical leader responsible for owning the manufacturing strategy and execution for complex spacecraft hardware. Your responsibilities the entire manufacturing value-chain, including Design for Manufacturability, advanced manufacturing process development, tooling design & selection, supplier technical management, quality system implementation, and comprehensive work documentation. You will lead a cross-functional initiatives, mentor junior engineers, and drive manufacturing excellence across PCBA, box-level electronics, electro-optical instruments, and integrated spacecraft systems.

The ideal candidate demonstrates proven leadership in solving complex technical challenges with innovative, practical solutions in fast-paced, resource-constrained environments. You have successfully scaled manufacturing processes from prototype through production and have a track record of delivering high-reliability hardware on aggressive timelines.

WHAT YOU’LL DO

• Lead the development, documentation, and continuous improvement of manufacturing processes for PCBAs, box-level assemblies, electro-optical instruments, and integrated spacecraft systems, ensuring compliance with space-grade standards (IPC-610/620 Class 3, NASA-STD-8739 series)
• Drive Design for Manufacturability (DFM/DFA) initiatives from concept through production, partnering with design engineers to optimize producibility, yield, and cost while providing hands-on technical leadership to manufacturing technicians
• Own quality assurance for assigned manufacturing processes, lead root cause analyses (RCA) and corrective actions for non-conformances, and proactively mitigate risks through PFMEA, process validation, and quality planning
• Specify, qualify, and deploy advanced assembly tools, fixtures, test equipment, and automation solutions, including custom tooling design using CAD/3D modeling capabilities
• Implement and optimize Manufacturing Execution Systems (MES), ERP/MRP workflows, and digital manufacturing tools to enhance traceability, efficiency, and data-driven decision-making
• Establish and manage technical relationships with suppliers and contract manufacturers, conducting assessments, audits, and qualification activities while driving quality improvements and manufacturability enhancements
• Lead or participate in design reviews (PDR, CDR), manufacturing readiness reviews (MRR), and production readiness reviews (PRR) for flight hardware programs
• Collaborate across engineering disciplines (systems, electrical, mechanical, optical, test, quality) and communicate effectively with program management, supply chain, and executive leadership on manufacturing status, risks, and mitigation strategies
• Analyze production data and lead scaling efforts from low-rate to high-rate production, implementing continuous improvement programs (Lean, Six Sigma) to optimize throughput, reduce cycle times, and enhance product reliability while reducing costs
• Define manufacturing strategy for spacecraft product lines, mentor and develop junior engineers and technicians, and represent Manufacturing Engineering in cross-functional leadership forums and strategic planning session

REQUIRED QUALIFICATIONS 

• 8+ years of manufacturing engineering experience in aerospace, space systems, aviation, defense, or other high-reliability industries, with a proven track record leading complex manufacturing programs from development through production
• Bachelor's degree in Electrical Engineering, Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, or related technical discipline required. Master's degree or equivalent advanced experience preferred
• Deep knowledge of aerospace and high-reliability electronics standards, including IPC-610/620 Class 3, IPC J-STD-001 Space Addendum, and NASA-STD-8739 series (soldering, wire harness, conformal coating)
• Expert-level understanding of PCBA manufacturing processes (SMT, through-hole, conformal coating, potting, component selection/screening) and strong technical knowledge of box-level assembly (cabling, harnessing, mechanical integration, thermal management, EMI/EMC)
• Hands-on experience implementing and optimizing Manufacturing Execution Systems (MES), ERP/MRP systems (SAP, Oracle, Odoo, Aligni), digital work instructions, and manufacturing process controls (SPC, Lean, Six Sigma)
• Demonstrated expertise in root cause analysis (8D, 5-Why, Fishbone, PFMEA), driving corrective/preventive actions (CAPA), and developing/executing process validation, first article inspection (FAI), and manufacturing qualification plans
• Ability to influence design for manufacturability and collaborate with electrical, mechanical, and systems design teams, with experience designing or specifying custom tooling, fixtures, and test equipment for complex assemblies
• Strong technical communication skills with ability to present to cross-functional teams and executive leadership, and proven ability to lead cross-functional initiatives across engineering, quality, supply chain, and operations
• Proven success in fast-paced, startup, or rapid development environments while maintaining meticulous attention to detail and quality, with a hands-on mindset and willingness to work directly on the manufacturing floor alongside technicians
• Must be eligible to obtain and maintain a U.S. Top Secret security clearance

PREFERRED QUALIFICATIONS 

• Direct experience manufacturing satellites, spacecraft, or space-based instruments (flight hardware), including spacecraft environmental testing (TVAC, vibration, shock, acoustics) and launch site integration support
• Familiarity with space-grade materials, processes, and workmanship standards such as NASA-STD-8739 series, ECSS standards, and IPC Space Addendum requirements
• Harness and cable assembly design capability, including schematic reading/drawing using tools like Altium, AutoCAD Electrical, or similar design software
• Experience with electro-optical or infrared sensor assembly, including optical alignment, cleaning protocols, contamination control, and cleanroom manufacturing practices
• Knowledge of advanced manufacturing technologies including selective soldering, automated optical inspection (AOI), X-ray inspection, conformal coating systems, and additive manufacturing (3D printing) for tooling or flight hardware
• Proven track record scaling production from prototype/LRIP to high-rate production (tens to hundreds of units), with experience implementing automation or semi-automation solutions for electronics assembly
• Lean Manufacturing or Six Sigma certification (Green Belt, Black Belt) with demonstrated project results and continuous improvement achievements
• Experience managing technical relationships with PCBA suppliers, cable/harness vendors, and contract manufacturers, including supplier audits, qualification activities, and AS9100
• Proficiency with CAD/3D modeling software (NX Design, SolidWorks, CREO, Fusion 360) and scripting tools (Python, MATLAB) for tooling design, DFM reviews, and data analysis
• Experience leading multi-disciplinary manufacturing programs with P&L or budget authority and recognized subject matter expertise in spacecraft manufacturing or high-reliability electronics
• Active Top Secret or TS/SCI clearance is a significant plus

ABOUT THE TEAM

An onsite role in Orange County, CA, responsible for the development and implementation of Environmental Health and Safety (EHS) programs to comply with federal, state, and local regulations.

ABOUT THE JOB

Individual will work in manufacturing and R&D environments focusing on EHS programs such as occupational safety, chemical management, incident management, ergonomics, industrial hygiene, storm water management, air emissions, regulated waste, etc

WHAT YOU’LL DO

• Assist accident/incidents investigations, analyze root causes, and implement preventative actions
• Serve as EHS interface and liaison with employees, managers, customers, auditors and regulators
• Identify workplace safety hazards and conditions for job-related tasks by performing and documenting safety inspections
• Heavy collaboration with other departments to help guide, teach and influence safe behaviors in the workplace
• Responsible for hazardous waste management, including proper handling, labeling, and storage
• Recognize requirements and ensure compliance to safety programs and standards including: hazard communication, fall protection, respiratory protection, lockout/tag-out (LOTO), machine guarding, power & hand-held tools, electrical, emergency response, and chemical management

REQUIRED QUALIFICATIONS

• 2+ years of experience implementing and overseeing environmental, health and safety programs
• Experience in Cal/OSHA regulations
• Experience in 40 CFR Parts 260-279 Hazardous Waste Management
• Strong written and verbal communication skills, effective at engaging with leadership, regulators, front-line staff, and third-party partners
• Capability to manage multiple activities/projects and deadlines
• U.S. Person status is required as this position needs to access export controlled sites
• Must be a U.S. Person due to required access to U.S. export controlled information or facilities

PREFERRED QUALIFICATIONS

• Well-rounded ESH professional who is comfortable being the sole EHS person on site
• Manufacturing experience
• High energy individual who craves the opportunity to build a system vs just manage one.
• Natural tendency towards challenging the status quo to find new and novel ways to improve EHS management systems

WHAT YOU’LL DO

• Provide the engineering expertise to design, fabricate and integrate harnesses systems and represent the harness discipline on a project
• Investigate, plan, design and develop harnesses to meet various technical requirements
• Research, select and procure appropriate connectors, back-shells, contacts, wire, shielding, and cable construction for the product to meet appropriate environmental requirements
• Develop and generate harness system block diagrams and wire diagrams to release for production
• Participate in design reviews and provide input to identify issues and drive design choices
• Prepare harness assembly instructions and test procedures, incorporating your knowledge of industry standards and best practices
• Provide guidance to the electrical team in identifying electrical system requirements given input from internal and external stakeholders including engineering (mechanical, electrical, software), product management, quality and compliance
• Work in a fast-paced environment supporting new developments, active deployments, and customer operated hardware
• Concurrently manage involvement in multiple projects at various stages

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering, Mechanical Engineering, or equivalent
• 3+ years hands-on experience designing electrical harnessing for rugged commercial, industrial, aerospace, or military applications
• Experience working directly with harness manufacturers to deliver high quality, high reliability products
• Own end-to-end of the electrical wiring and interconnect system, including power distribution, grounding, shielding, and signal integrity.
• Ensure the design meets system-level electrical requirements for voltage, current, bandwidth, redundancy, EMI/EMC.
• Perform electrical trade studies for wire gauge, shielding, connector selection, and topology.
• Analyze and mitigate electrical risks such as voltage drop, crosstalk, EMI susceptibility, and thermal effects.
• Familiarity with common electrical bus interfaces (CAN, Ethernet, RS422, RS232, 1553)
• Familiar with existing applicable harness standards as well as MIL-STD requirements
• Able to apply knowledge of SWaP for power, network and communications systems and designs
• Experience reading wire block interconnect diagrams and wire diagrams
• Exceptional organization and communication skills (both written and oral)
• Must be eligible to receive a US Security Clearance

PREFERRED QUALIFICATIONS

• Build 3D routed harness data files applying NX Cabling and Siemens Capital Harness
• Experience with or proficient in 3D CAD wire harness routing, such as (NX, Siemens Capital, CATIA, CREO)
• Able to read and generate formboard drawings in 2D CAD for production
• EMI/EMC principles and common electrical bus interfaces (CAN, Ethernet, RS-422, RS-232, MIL-STD-1553).

Anduril’s Reliability & System Safety Engineering organization is seeking a System Safety Engineer to support our Air Defense programs. The Reliability & System Safety Engineering team works with our broader Engineering team to ensure our products operate and meet all mission performance, environmental conditions, and customer requirements. We develop cutting-edge Reliability & System Safety processes and methods to secure scalable, long-term business success.

As a System Safety Engineer at Anduril, you will leverage your extensive knowledge of advanced Reliability & System Safety tools and methodologies to drive excellence in our safety processes. You will support the Reliability Engineering, Systems Engineering, and Hardware & Software development teams across the product development lifecycle by guiding Functional Hazard Analysis, Fault Trees, System Safety Assessments, and Hazard Management and Hazard Mitigation activities for your product(s). The right person for this role has knowledge of design and development with a safety focus on aircraft systems, as well as exposure to test, analysis, manufacturing, and continuous improvement in a production environment. If you are someone who has hands-on experience throughout the new product development life cycle from concept to customer delivery, loves to build world-class Reliability and Safety processes, can work efficiently across multi disciplinary teams, and be accountable for results, then this role is for you.

WHAT YOU'LL DO

REQUIRED QUALIFICATIONS

PREFERRED QUALIFICATIONS

Job Description

Anduril is seeking Systems Safety Engineer to join the Omen team at our Costa Mesa HQ. Omen is Anduril’s hover-to-cruise autonomous air vehicle (AAV) that packs the endurance, payload, and mission flexibility of much larger airplanes into a novel runway-independent Group 3 platform. Omen can operate from ship decks, beaches, or remote island clearings, providing true runway independence and freedom of maneuver across defense and civilian domains. Omen is the first tail-sitter aircraft with a mass-production contract, with an order of 50 systems representing a decisive investment that anchors production and accelerates the development of future systems.

You will work on the System Safety and Airworthiness aspects of new aircraft development effort in a lean, high-ownership culture where you directly shape the product and operate at a velocity to fly new designs within months, not years.

WHAT YOU’LL DO

• Bring a pragmatic and right-sized approach to Systems Safety and Airworthiness to enable Omen Capability realization at the speed of relevance
• Develop and implement a tailored Systems Safety approach aligned with MIL-STD-882E and the end-user for the Omen Capability
• Engage with customers, end-users and local regulatory authorities to Identify appropriate Airworthiness frameworks and recognized standards to develop the overall Airworthiness strategy as a foundation for design efforts
• Develop Airworthiness plans and documentation in support of regional regulatory processes and submissions
• Develop Systems Safety requirements and collaborate with Vehicle, Mission, Support and Production design teams to implement Safety Safety best practices
• Identify the need for and conduct complex safety analyses, including FHA (Functional Hazard Analysis), System/Subsystem Hazard Analysis, System of Systems Hazard Analysis, Environmental Hazard Analysis, Operating and Support Hazard Analysis, Health Hazard Analysis, Fault Tree Analysis (FTA) and SCFTA (Safety Critical Functional Thread Analysis), Failure Modes, Effects, and Criticality Analysis (FMECA)
• Identify and document hazards and risks for the Omen project, manage hazard tracking databases, and ensure proper risk mitigation strategies are implemented
• Support System Design Reviews (SDR) and engineering governance structures such as Preliminary Design Reviews (PDR), Critical Design Reviews (CDR), Test Readiness Reviews (TRR), Safety Review Boards (SRB) representing System Safety and Airworthiness
• Lead and triage Systems Safety outcomes from Root Cause Corrective Action (RCCA) investigations and mishap reports
• Drive continuous improvement in Systems Safety processes and methodologies
• Develop and own the Omen System Safety Program Plan (SSPP)

REQUIRED QUALIFICATIONS AND ATTRIBUTES

• Bachelor degree in Aerospace, Mechanical, Electrical or Systems Engineering, or equivalent technical discipline
• 10+ years industry experience as a Systems Safety Engineer aligned with Airworthiness activities
• Experience with safety-critical hardware and software systems in the Defense or Aerospace industries, specifically crewed aircraft, rotorcraft, UAS or weapon systems
• Extensive knowledge of AC 23-1309-1E, MIL-STD-882E, MIL-STD 516C airworthiness, AC-17-01, and other relevant safety standards
• Experience establishing and maintaining relationships with civil and military Airworthiness authorities
• Proven experience working civil and military Airworthiness processes, including MIL-HDBK-516 series documents, throughout the life cycle of a developmental aircraft to achieve successful program completion
• Experience developing and managing Airworthiness plans, tracking of Airworthiness criterions, and similar activities
• Strong background in safety analysis techniques, including FTA, FHA, SCFTA, and FMECA
• Failure investigation/analysis experience with proven track record of solving problems and preventing reoccurrence
• Experience with crewed or uncrewed developmental autonomous aircraft (Group 3 UAS or larger)
• Understanding of high voltage and high power systems or hybrid powertrains advantageous
• Experience with guidelines, standards and processes such as ARP-4754, ARP-4761, DO-178C, DO-254, JSSSEH, MIL-STD-810, MIL-STD-461 is desirable
• Familiarity with technical software packages such as Relyence, Teamcenter, JIRA, JAMA, Cameo, and/or Ansys
• Excellent written, verbal, interpersonal and communication skills
• A sincere commitment to a positive, inclusive, and collaborative culture
• Eligible to obtain and maintain a security clearance in United States, United Kingdom, or Australia

WHAT YOU’LL DO
The Mechanical Engineer in this role will be part of a team developing a new augmented reality vision system that combines cutting edge multi spectral sensors, compute, thermal management, and ballistic protection for soldiers in the Army. A successful candidate will have experience with military specifications and wearable systems. They will pursue prototyping and evaluation efforts with a high degree of autonomy meeting stringent SWAP-C requirements while balancing human factors and comfort with packaging needs.

QUALIFICATIONS & CRITICAL COMPETENCIES

• BS, M.Eng, MS or PhD in an engineering field
• 5+ years post-grad professional Mechanical Engineering experience
• CAD skills (any platform) and ability to manage complex parts and assemblies, and produce high quality engineering drawings
• High competencies with:
• Detailed mechanical design for: traditional and additive manufacturing from prototype through production with metallics and composites
• Ergonomics and Human Factors: Designing for comfort, fit, and usability to ensure the wearable devices are effective for prolonged wear in tactical environments
• Structural/Thermal Analysis: Ability to perform first order analyses to inform trade studies and concept designs
• Manufacturing Processes: Knowledge of techniques for fabricating and assembling materials, including molding, laminating, and machining
• Thermal and Environmental Considerations: Understanding how temperature, humidity, and other environmental factors affect materials and performance
• Must be eligible to obtain a U.S. Security Clearance

PREFERRED QUALIFICATIONS

• Consumer electronics packaging and design, design for cameras, displays, SoC integration, and ruggedization
• Experience with a military qualification programs including a deep understanding of MIL-STD requirements
• Experience with NX/Teamcenter, including FEA extensions
• Experience rapid prototyping and iterating with 3D printed assets