About Atomic Machines

Atomic Machines is ushering in a new era of micromanufacturing with its Matter Compiler™ technology. This full-stack technology enables new classes of micromachines to be designed and built by offering manufacturing processes and a materials library that is inaccessible to semiconductor manufacturing methods. It promises to unlock MEMS manufacturing for the many 

Atomic Machines is ushering in a new era of micromanufacturing with its Matter Compiler™ technology. This full-stack technology enables new classes of micromachines to be designed and built by offering manufacturing processes and a materials library that is inaccessible to semiconductor manufacturing methods. It promises to unlock MEMS manufacturing for the many device classes frustrated by semiconductor methods and to open up entirely new product classes. The Matter Compiler™ technology fully realizes the digital manufacturing dream: bits and raw materials go in, and complete, functional micromachines come out. The Atomic Machines team has also created an exciting first device—one that was only made possible by the existence of the Matter Compiler™ technology—that we will be unveiling to the world soon.

Our offices are in Emeryville and Santa Clara, California.

About the Role

We are looking for a well-rounded, experienced electrical engineer who enjoys working in an agile environment. We expect our engineers to be self-motivated, willing and capable of making decisions based on incomplete information, and to have a get-it-done attitude.

The main line of work will be to build and integrate machine control systems for our custom manufacturing nodes. Our system is built around a multiprocessor architecture with distinct processors handling networking, general machine control, and specialty controls like vision and motion. Interconnect selection, prototype cabling, and bring-up firmware are also important aspects of the job.

We emphasize modularity for reuse to speed up subsequent builds of nodes with similar needs.

What You'll Do:

• Participate in system architecture definition and drive electrical architecture
• Design and build custom electronics for our automated manufacturing systems
• Integrate third-party electronics
• Support the building of engineering fixtures
• Create and maintain component and module libraries for reuse
• Generate manufacturing data and interact with vendors
• Work closely with embedded systems, software, and mechanical engineering teams

What You'll Need:

• 3+ years of experience as an Electrical Engineer
• Maker mentality, being hands-on to quickly build, integrate, and test proof of concepts
• Schematic entry, layout, and library management (Altium Designer preferred)
• Excellent bring-up and debugging skills
• Ability to write bring-up code for processors in C/C++ and test scripts in Python
• Strong background in mixed-signal circuit design
• Power electronics design and bring-up experience
• Familiarity with a range of sensors and actuators
• SPICE simulation knowledge
• SMD soldering skills, familiarity with test and measurement equipment
• Good working knowledge of signal integrity, EMI, and ESD handling
• Cable harness design
• Good documentation habits
• A first-principles mindset—questioning assumptions, reframing problems from the ground up, and approaching challenges with foundational understanding rather than relying solely on precedent.
• B.S. in Electrical Engineering, Computer Science, Physics, or related field

Bonus Points For:

• Motor control experience
• Flex PCB design
• Industrial power distribution experience
• High reliability design
• FPGA skills
• Having worked with contract manufacturers
• Expertise in FMEA

WHAT YOU’LL DO

• Define, own, and execute the product portfolio and roadmap for critical core technology products, leading a cross-functional engineering team (Electrical, Firmware, FPGA, Test) to deliver robust embedded compute solutions for vehicle management, DSP, and networking.
• Drive and oversee the full hardware product development lifecycle, from concept and requirements definition through architecture, design, development, bring-up, test, integration, support and sustainment for high-performance PCBs, including host boards for FPGAs / SoCs / SoMs.
• Establish and optimize comprehensive product development workflows and best practices across the hardware and firmware lifecycle, encompassing architecture, design, simulation, verification, and system testing.
• Collaborate extensively with internal stakeholders, product management, and customers to define product requirements, develop strategic roadmaps, and ensure scalable deployment of core technology solutions across Anduril.
• Manage and communicate detailed product development schedules, milestones, and deliverables, ensuring clear task assignments, accountability, and timely execution within the cross-functional team.

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 7+ years of experience designing, testing, and troubleshooting complex board designs in military, automotive or similar hardware.
• Demonstrated experience leading cross-functional hardware and/or embedded systems product development teams, taking products from concept to deployment.
• Proficiency in an HDL language (VHDL, Verilog)
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Experience in design for signal integrity / power integrity.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Proficient with Altium Designer or equivalent electronic design automation design tool
• Familiarity with flight software architectures and development processes for embedded systems.
• Familiarity with high reliability designs in aerospace environments
• Familiarity with aircraft systems architectures, especially with redundant systems
• Eligible to obtain and maintain an active U.S. Top Secret security clearance

PREFERRED QUALIFICATIONS

• Understanding of real-time operating systems (RTOS) and embedded software design principles, particularly for flight-critical applications.
• Understanding and familiarity with DO-254, DO-178C, DO-160, DO-311A
• Understanding and familiarity with MIL-STD-810, MIL-STD-704, MIL-STD-461
• Expertise in computer networking
• Experience with implementing enhanced security measures

• Setup, execute and analyze test experiments per test procedures and record findings into test records
• Support with builds of test harnesses, racks, and environmental setups
• Improve and update automation, consistency, and coverage per engineering instructions
• Troubleshoot and repair of electrical, electronics and integrated circuits to the component level
• Maintain and calibrate electrical and/or mechanical test equipment
• Create assembly instructions and bill of materials for test equipment and fixtures
• Document test plans, user instructions and manuals
• Operate a clean and safe work environment
• Travel to test sites and external laboratories as required

• 4+ years of electronics testing experience in an R&D environment
• Familiarity with reading electrical system and component schematics
• Familiarity with product development life cycle, reliability, and compliance testing
• Familiarity with electronics test equipment such as power supplies, electronic loads, oscilloscope, function generators, data acquisition and measurement sensors
• Strong root cause analysis skills
• Excellent written, verbal, interpersonal and communication skills
• Able to pivot quickly between tasks and prioritize simultaneous tasks in a fast-paced environment
• Eligible to obtain and maintain an active U.S. Secret security clearance

• 5+ years electronics experience including testing
• Associate degree in Electrical/Electronics, Computer, Mechanical Technologies, or related fields
• Familiarity with IPC Quality Standards, IPC-610, IPC-620, J-STD and other assembly and inspection standards
• Experience with High Voltage and High Power Testing such as propulsion inverters and batteries
• Experience with equipment calibration and metrology
• Experience with electrical compliance testing such as EMI/EMC testing

We’re looking for a Field Application Engineer who’s wired for AI/ML, fluent in real-world problem-solving, and excited to build with the people actually using what we make. You will collaborate closely with the sales team and enterprise customers, leveraging your deep technical knowledge in AI to drive the adoption of our products and solutions. This is a customer-facing role that requires both technical expertise and excellent communication skills to convey complex technical concepts to non-technical stakeholders.

This role is hybrid, based out of Santa Clara, CA.  

We welcome candidates at various experience levels for this role. During the interview process, candidates will be assessed for the appropriate level, and offers will align with that level, which may differ from the one in this posting.

Who You Are

• You’ve lived in the AI/ML trenches, whether as a field engineer, a solutions architect, or the one tapped in when things needed to “just work.”
• You speak both machine and human. Whether it’s a researcher or a skeptical executive, you know how to break things down and bring them to life.
• You’re fired up about generative models, LLMs, and the edge of what’s possible when software meets purpose-built silicon.
• Work directly with customers in meetings, presentations, and workshops to understand their technical challenges and provide effective solutions.
• Partner closely with sales operations and product teams to provide feedback from customers and help shape future product enhancements.

What We Need

• Strong customer-facing skills with 5+ years of relevant technical, enterprise experience (such as Sales Engineer, Solutions Engineer, or Technical Account Manager).
• Your field insight will help shape our roadmap, our features, and the way we show up for developers.
• Proven expertise in AI technologies and frameworks, including machine learning, deep learning, natural language processing (NLP),computer vision, PyTorch or TensorFlow.
• Experience with embedded systems, FPGA Architecture or AI accelerators. Familiarity with hardware/software co-optimization is often critical for efficient inference at the edge.
• Good understanding of data center, server architecture and deployment, thermal/power, and infrastructure management.

What You Will Learn

• How to explore and push the boundaries of AI performance on custom silicon and help developers do the same.
• What it’s like to build the future from scratch, working alongside teams creating hardware, software, and everything in between.
• To master the craft of fine-tuning LLMs, optimizing vision models, and building AI pipelines that run at scale.
• An understanding of why field roles drive real impact turning on-the-ground insight into product breakthroughs and platform momentum.

Compensation for all engineers at Tenstorrent ranges from $100k - $500k including base and variable compensation targets. Experience, skills, education, background and location all impact the actual offer made.

Tenstorrent offers a highly competitive compensation package and benefits, and we are an equal opportunity employer.

Team Description:

To achieve Neuralink’s mission and provide our technology to those that need it, the surgical process that implants our cutting-edge devices must be exceptionally safe, efficient, and scalable. 

The surgical robot we design is key to enabling this, and the Robot Electrical Engineering Team supports this by designing, testing, and integrating all electrical aspects of our robot, encompassing a diverse range of fundamental electrical engineering domains while also working closely with the optical, mechanical, and software engineering teams.

Job Description and Responsibilities:

As an Electrical Engineering Intern you'll own meaningful projects and make substantial contributions as an integral member of our fast-moving team. You will be expected to design, verify, and oversee the transition to production of a variety of custom electronics systems while additionally supporting broader team efforts through debugging, manufacturing, testing, and more. Specific responsibilities and projects may include:

• All phases of board design (part selection, schematic design, layout, and bring-up)
• Custom motor drivers, from transistor selection to control loop design
• Custom high-bandwidth, low-latency, camera hardware and firmware
• Custom FPGA based Optical Coherence Tomography data acquisition systems
• Testing hardware such as Hardware-In-The-Loop systems, validation boards, and life-cycle testing rigs
• Case studies on future system architectures including new compute platforms, redesigned actuator layouts, and deep-brain imaging systems

Required Qualifications:

• Demonstrable experience developing circuits or products that have been used by real customers. Student design team work and personal projects may apply
• Circuit board design experience demonstrating advanced knowledge in at least one niche, for example high density (HDI), high speed digital, high power, radio frequency, atypical materials or constructions, etc.
• Experience with sensors, power management, and signal/power integrity
• Design experience with common communication protocols (SPI, UART, I2C, etc.)
• Competent with common lab equipment (oscilloscopes, power supplies, etc.)

Preferred Qualifications:

• A portfolio showing examples of projects you’ve completed. 
• Demonstrable experience in developing electronics for critical systems in fields such as medical devices, aerospace, automotive, or military.
• Experience with firmware development for embedded systems (C/C++, Rust)
• Experience with software development for Linux systems (Python, C++, Rust) 

ABOUT THE TEAM
Anduril’s Maritime Division has assembled a diverse team of experts in software, robotics, artificial intelligence, sensor fusion, and data analysis to create software and hardware solutions that radically evolve the capabilities of our customers. We are fielding the next generation of autonomous systems to tackle the extremely challenging industry demands of maritime operations. Anduril has brought to market a unique, ultra-long-range, full-ocean-depth underwater vessel platform and a completely refreshed maritime vehicle and flexible manufacturing architecture that scales from "small" to "extra-large" vehicle sizes. Today, Anduril is executing on billion-dollar contracts while simultaneously performing Robot-as-a-Service (RaaS) AUV operations.

We are continuing to expand our product portfolio, now moving into the surface maritime domain. Products like Dive-XL, Dive-LD, Copperhead, Seabed Sentry, and surface products in the pipeline will create a system-of-systems that enable a multitude of autonomous missions across all maritime domains. If you are passionate about solving problems that have real impact and working on systems that directly contribute to achieving national strategic priorities, we want you to join Anduril’s Maritime Division and help us build the future of defense capability.

ABOUT THE JOB
We are seeking a highly motivated and experienced Electrical Engineer to join our team in Costa Mesa, California. You will work closely with the program leadership and a wide spectrum of cross-departments as part of a team focused on solving hard problems and changing the industry forever. In this role you will be responsible for designing and supporting the integration of various electrical subsystems, supporting testing efforts, and ensuring overall system performance meets the required specifications and standards. Join our dynamic team and help us build the next generation of autonomous maritime systems.

WHAT YOU'LL DO

• Develop electrical schematics, power system single line diagrams, system interconnect diagrams and define wire harnesses that connect electronic equipment within a subsystem and between subsystems
• Design electrical interfaces and enclosures for integration of sensors, and peripheral equipment with autonomous systems
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both test equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools
• Develop subsystems (sensors, interfaces, power management, and networking) for bespoke capabilities
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products
• Work in a fast-paced environment balancing schedule against cost and performance parameters
• Conduct peer-level and cross-discipline design reviews, perform requirements analysis, and plan system verification to ensure compliance with project goals and industry standards

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent with 8+ years of experience designing, testing, and troubleshooting electrical systems
• Knowledge of modern analog and digital electronics and electronic circuits
• Experience developing schematics, interconnect diagrams, and wiring harnesses
• Comfortable with a variety of electronic CAD tools (NX, SolidWorks, others acceptable)
• Familiarity with networking and standard interfaces such as Ethernet, CAN, I2C, USB, MODBUS, ProfiNet, etc
• Competence with test equipment such as multi-meter, oscilloscopes, logic analyzers, and automation of tests
• Experience with electro-mechanical and electrical design concepts
• Experience in design for signal integrity / power integrity
• Experience in designing and integrating low-power electronics
• Experience in fieldable system design
• Familiarity with developing and executing test plans for complex systems
• High-ownership and a bias toward action – if you see a problem, you want to solve and fix it
• Eligible to obtain and maintain an active U.S. Secret security clearance
• Ability to travel 25% with potential surges above 25%

PREFERRED QUALIFICATIONS

• Experience designing electronic circuits and hardware kits
• Experience designing electrical and power systems for autonomous systems
• Familiarity with common MCU, CPU, FPGA devices and technologies
• Experience with PCB design including collecting requirements, schematic design (Altium, Eagle), component selection, supervision or completion of layout, bring-up, test, debug and system integration
• Familiarity with software development processes and tools such as git, Github, JIRA, etc
• Comfortable in conducting worst case circuit or uncertainty and fault analysis
• Experience with high reliability and/or autonomous systems
• Familiarity with designing for rugged environments

ABOUT THE TEAM
Anduril’s Maritime Division has assembled a diverse team of experts in software, robotics, artificial intelligence, sensor fusion, and data analysis to create software and hardware solutions that radically evolve the capabilities of our customers. We are fielding the next generation of autonomous systems to tackle the extremely challenging industry demands of maritime operations. Anduril has brought to market a unique, ultra-long-range, full-ocean-depth underwater vessel platform and a completely refreshed maritime vehicle and flexible manufacturing architecture that scales from "small" to "extra-large" vehicle sizes. Today, Anduril is executing on billion-dollar contracts while simultaneously performing Robot-as-a-Service (RaaS) AUV operations.

We are continuing to expand our product portfolio, now moving into the surface maritime domain. Products like Dive-XL, Dive-LD, Copperhead, Seabed Sentry, and surface products in the pipeline will create a system-of-systems that enable a multitude of autonomous missions across all maritime domains. If you are passionate about solving problems that have real impact and working on systems that directly contribute to achieving national strategic priorities, we want you to join Anduril’s Maritime Division and help us build the future of defense capability.

ABOUT THE JOB
We are seeking a highly motivated and experienced Electrical Engineer to join our team in Costa Mesa, California. You will work closely with the program leadership and a wide spectrum of cross-departments as part of a team focused on solving hard problems and changing the industry forever. In this role you will be responsible for designing and supporting the integration of various electrical subsystems, supporting testing efforts, and ensuring overall system performance meets the required specifications and standards. Join our dynamic team and help us build the next generation of autonomous maritime systems.

WHAT YOU'LL DO

• Develop electrical schematics, power system single line diagrams, system interconnect diagrams and define wire harnesses that connect electronic equipment within a subsystem and between subsystems
• Design electrical interfaces and enclosures for integration of sensors, and peripheral equipment with autonomous systems
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both test equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools
• Develop subsystems (sensors, interfaces, power management, and networking) for bespoke capabilities
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products
• Work in a fast-paced environment balancing schedule against cost and performance parameters
• Conduct peer-level and cross-discipline design reviews, perform requirements analysis, and plan system verification to ensure compliance with project goals and industry standards

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent with 5+ years of experience designing, testing, and troubleshooting electrical systems
• Knowledge of modern analog and digital electronics and electronic circuits
• Experience developing schematics, interconnect diagrams, and wiring harnesses
• Comfortable with a variety of electronic CAD tools (NX, SolidWorks, others acceptable)
• Familiarity with networking and standard interfaces such as Ethernet, CAN, I2C, USB, MODBUS, ProfiNet, etc
• Competence with test equipment such as multi-meter, oscilloscopes, logic analyzers, and automation of tests
• Experience with electro-mechanical and electrical design concepts
• Experience in design for signal integrity / power integrity
• Experience in designing and integrating low-power electronics
• Experience in fieldable system design
• Familiarity with developing and executing test plans for complex systems
• High-ownership and a bias toward action – if you see a problem, you want to solve and fix it
• Eligible to obtain and maintain an active U.S. Secret security clearance
• Ability to travel 25% with potential surges above 25%

PREFERRED QUALIFICATIONS

• Experience designing electronic circuits and hardware kits
• Experience designing electrical and power systems for autonomous systems
• Familiarity with common MCU, CPU, FPGA devices and technologies
• Experience with PCB design including collecting requirements, schematic design (Altium, Eagle), component selection, supervision or completion of layout, bring-up, test, debug and system integration
• Familiarity with software development processes and tools such as git, Github, JIRA, etc
• Comfortable in conducting worst case circuit or uncertainty and fault analysis
• Experience with high reliability and/or autonomous systems
• Familiarity with designing for rugged environments

Aurora hires talented people with diverse backgrounds who are ready to help build a transportation ecosystem that will make our roads safer, get crucial goods where they need to go, and make mobility more efficient and accessible for all. We’re searching for a Senior Staff Electrical Engineer.

In this role, you will 

• Join an exceptional team of electrical engineers responsible for the development of electronics for Aurora’s custom hardware
• Collaborate with numerous internal and external teams gathering requirements, defining HW architecture, modeling, and delivering electronics that achieve performance and product metrics
• Build, integrate, test, and debug electronics on the bench and in systems; leverage software tools and advanced test equipment (e.g. oscilloscopes, spectrum analyzers, network analyzers)
• Partner with mechanical, operations, and validation teams to mature high quality electrical designs to manufacturing; including supporting test infrastructure development to meet product coverage and yield targets
• Leverage expertise in product development (define/build/test), and have extensive prior experience launching product
• Mentor and guide junior engineers
• Help define and optimize processes to streamline product development

Required Qualifications

• This role requires a bachelor's or master's degree with a focus in electrical or computer engineering
• 10+ years experience in industry developing complex electrical hardware
• Mentor and guide junior engineers
• Experience working with Mechanical engineering team on board design and device cooling
• Expertise in system architecture, signal and power integrity design and analysis, high speed signaling, grounding, analog electronics
• High proficiency and ability to analyze systems for balancing electro-mechanical and EMI/EMC constraints
• Extensive experience with hardware productization: system, board and chip level implementation
• Strong electrical engineering fundamentals supported by the use of CAD tools to capture schematic designs, manage PCB layout, leverage Power/Signal simulation/emulation input
• Expertise with lab instruments (TDR, Oscilloscopes, Analyzers, DMMs, Power Supplies, and E-loads)

Desirable Qualifications 

• Experience with custom sensor development and/or network design
• Knowledge of automotive requirements, safety framework (ISO26262) and qualification processes
• Experience with both rapid prototyping and design for manufacturing
• Programming and Scripting (C++, Python or equivalent) experience
• FPGA/ASIC Design experience

The base salary range for this position is $197,000 - $285,000 per year. Aurora’s pay ranges are determined by role, level, and location. Within the range, the successful candidate’s starting base pay will be determined based on factors including job-related skills, experience, qualifications, relevant education or training, and market conditions. These ranges may be modified in the future. The successful candidate will also be eligible for an annual bonus, equity compensation, and benefits.

#Mid-Senior 

Aurora hires talented people with diverse backgrounds who are ready to help build a transportation ecosystem that will make our roads safer, get crucial goods where they need to go, and make mobility more efficient and accessible for all. We’re searching for a Senior Staff TLM, Electrical Engineering - HPE.

In this role, you will

• Lead an exceptional team of electrical engineers responsible for the development of electronics for LiDAR, Compute or a variety of hardware products
• Collaborate with numerous internal and external teams gathering requirements, defining HW architecture, modeling, and delivering LiDAR, Compute or a variety of hardware products that achieve performance and product metrics
• Guide and manage the team to build, integrate, test, and debug LiDAR, Compute or a variety of hardware products; leverage software tools and advanced test equipment (e.g. oscilloscopes, spectrum analyzers, network analyzers)
• Mature processes for electrical engineering product development that adhere to safety, execution and quality requirements 
• Partner with mechanical, operations, and validation teams to mature high quality electrical designs to manufacturing; including supporting test infrastructure development to meet product coverage and yield targets 
• Leverage deep expertise in product development (define/build/test), and have extensive prior experience launching product 
• Partner closely with program management to manage project deliverables
• Partner closely with supply chain and new product introduction to identify and qualify suppliers, parts and processes
• Plan and promote a forward looking outlook to hire and develop the team to meet future product roadmap

Required Qualifications

• This role requires a bachelor's or master's degree with a focus in electrical or computer engineering
• 10+ years experience in industry developing complex electrical hardware 
• 4+ years direct, personnel leadership of electrical engineering teams including hiring, establishing best practices, managing performance and growth
• Expertise in system architecture, signal and power integrity design and analysis, high speed signaling, grounding, analog electronics 
• High proficiency and ability to analyze systems for balancing electro-mechanical and EMI/EMC constraints
• Extensive experience with hardware productization: system, board and chip level implementation
• Strong electrical engineering fundamentals supported by the use of CAD tools to capture schematic designs, manage PCB layout, leverage Power/Signal simulation/emulation input
• Expertise with lab instruments (Oscilloscopes, Analyzers, DMMs, Power Supplies, and E-loads)

Desirable Qualifications

• Experience with LiDAR, Compute or a variety of hardware products
• Knowledge of automotive requirements, safety framework (ISO26262) and qualification processes
• Experience with both rapid prototyping and design for manufacturing
• Programming and Scripting (C++, Python or equivalent) experience
• FPGA/ASIC Design experience

The base salary range for this position is $197,000,000-$315,000 per year.  Aurora’s pay ranges are determined by role, level, and location. Within the range, the successful candidate’s starting base pay will be determined based on factors including job-related skills, experience, qualifications, relevant education or training, and market conditions. These ranges may be modified in the future. The successful candidate will also be eligible for an annual bonus, equity compensation, and benefits.

#Mid-Senior 

ABOUT THE JOB

As an Electrical Engineer in the Manufacturing organization you will design and build complex systems and PCBA platforms to test our products. Data acquisition and physical layer interfaces using FPGA, MCU, and off-the-shelf equipment will enable testing our systems to stringent standards ensuring that we are consistently shipping the highest quality products to our customers. You will work in a multi-disciplinary design team, managing requirements, capturing custom circuits, and designing complex assemblies and harnesses. You will work with firmware engineers to enable board support packages for embedded Linux, and bring up MCU RTOS platforms. In this role you’ll need to think creatively and come up with solutions to solve difficult testing problems and push to continuously improve our methods of automation, throughput, user interfaces, and data analytics.

WHAT YOU’LL DO

• Build things that test things. Design Circuits and Schematics that will be built into test automation platforms.
• Integrate your designs into Anduril’s PDM systems. You will follow the same process for component design and release that our product design teams use.
• Design and source PCB Assemblies with varying complexity - from FPGA based data acquisition boards, to MCU platform data interfaces, breakout boards, wiring harnesses, or peripheral modules.
• Architect and source circuit board test fixtures, integrating your designs with internally developed and off-the-shelf data acquisition equipment.
• Build internal library for test circuit for data acquisition, leverage your expertise for DFM / DFT.
• Debug, and Characterize circuits, low speed interfaces (I2C, SPI, CAN, etc.) and high speed signals (RF, memory, USB).

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Electrical/Electronics, Computer Engineering, or related fields.
• 5+ years of relevant industry experience with emphasis on product designs that have gone to manufacturing.
• Experience with Professional Electronics Design packages (Altium, Cadence, PADs, etc.) for schematic capture and layout.
• Experience in PCBA Design. Ability to design and fabricate your own designs, or guide contract manufacturing resources.
• Strong familiarity with electronics test equipment such as power supplies, electronic loads, oscilloscope, function generators, spectrum analyzers, data acquisition and measurement sensors.
• Familiar with Product Life Cycle (PLM) systems and releasing designs for production.
• Experience with scripting tools Python for configuration and automation of setup tasks
• Currently possesses and is able to maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• 8+ years of relevant industry experience.
• Familiarity with FPGA PCBA platforms - RTL, design synthesis, and bare-metal coding.
• Master’s of Science in Electrical/Electronics Engineering or related field.

ABOUT THE JOB

As an Electrical Engineer in the Manufacturing organization you will design and build complex systems and PCBA platforms to test our products. Data acquisition and physical layer interfaces using FPGA, MCU, and off-the-shelf equipment will enable testing our systems to stringent standards ensuring that we are consistently shipping the highest quality products to our customers. You will work in a multi-disciplinary design team, managing requirements, capturing custom circuits, and designing complex assemblies and harnesses. You will work with firmware engineers to enable board support packages for embedded Linux, and bring up MCU RTOS platforms. In this role you’ll need to think creatively and come up with solutions to solve difficult testing problems and push to continuously improve our methods of automation, throughput, user interfaces, and data analytics.

WHAT YOU’LL DO

• Build things that test things. Design Circuits and Schematics that will be built into test automation platforms.
• Integrate your designs into Anduril’s PDM systems. You will follow the same process for component design and release that our product design teams use.
• Design and source PCB Assemblies with varying complexity - from FPGA based data acquisition boards, to MCU platform data interfaces, breakout boards, wiring harnesses, or peripheral modules.
• Architect and source circuit board test fixtures, integrating your designs with internally developed and off-the-shelf data acquisition equipment.
• Build internal library for test circuit for data acquisition, leverage your expertise for DFM / DFT.
• Debug, and Characterize circuits, low speed interfaces (I2C, SPI, CAN, etc.) and high speed signals (RF, memory, USB).

REQUIRED QUALIFICATIONS

• Bachelor’s degree in Electrical/Electronics, Computer Engineering, or related fields.
• 5+ years of relevant industry experience with emphasis on product designs that have gone to manufacturing.
• Experience with Professional Electronics Design packages (Altium, Cadence, PADs, etc.) for schematic capture and layout.
• Experience in PCBA Design. Ability to design and fabricate your own designs, or guide contract manufacturing resources.
• Strong familiarity with electronics test equipment such as power supplies, electronic loads, oscilloscope, function generators, spectrum analyzers, data acquisition and measurement sensors.
• Familiar with Product Life Cycle (PLM) systems and releasing designs for production.
• Experience with scripting tools Python for configuration and automation of setup tasks
• Currently possesses and is able to maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• 8+ years of relevant industry experience.
• Familiarity with FPGA PCBA platforms - RTL, design synthesis, and bare-metal coding.
• Master’s of Science in Electrical/Electronics Engineering or related field.

CHAOS Industries is redefining modern defense with omniscient systems purpose-built for today’s realities. Designed and built by top U.S. military veterans and Silicon Valley innovators, CHAOS Industries’ products are powered by Coherent Distributed Networks (CDN™), empowering warfighters, commercial air operators, and border protection teams to act faster, adapt rapidly, and stay ahead of evolving threats. In a world where technological threats move at unprecedented speed, CHAOS Industries delivers advanced sensing and detection solutions that give the ultimate advantage: time.   

CHAOS Industries was founded in 2022 and has raised $1B in total funding from leading investors including 8VC, Accel, and NEA. The company is headquartered in Los Angeles, with offices in Washington, D.C., San Francisco, Seattle, and London. For more information, please visit www.chaosinc.com. 

Role Overview:

CHAOS is seeking a highly-skilled and motivated FPGA Engineer to join our team supporting our R&D and product engineering initially focusing on our next-generation radar products. This is a highly collaborative role which will allow you to work on multiple capabilities within our product offerings. As a member of our engineering team, you also have the opportunity to expand your skillset across our product families.   

Responsibilities: 

• Design and implement complex FPGA designs targeting our next-generation sensor products
• Support system integration of FPGA designs with complex software systems
• Support deployed FPGA capabilities in the hands of our U.S. and international customers
• Work full-time on-site in our office in Hawthorne, California

Minimum Requirements:

• Bachelor’s or higher degree in Computer Engineering, Electrical Engineering, Computer Science or related degree
• 5+ years of experience in a professional setting performing detailed digital RTL design targeting FPGAs
• Extensive experience with the entire FPGA design life cycle: RTL design, behavioral simulation, place and route, timing analysis, hardware integration
• Extensive experience developing in Verilog and SystemVerilog
• Extensive experience with the ARM AMBA AXI Protocol (AXI4, AXI4-Lite, AXI4-Stream)
• Extensive experience with the AMD (Xilinx) Vivado Design Suite and SoC FPGAs (Zynq, Ultrascale/Ultrascale+, Versal)
• Experience with Network Protocols (TCP/UDP/IP)
• Experience with Serial Protocols (I2C, JTAG, UART, SPI, CAN)
• Experience using Bash and Python for scripting and testing
• Experience modifying software drivers and applications when needed to validate FPGA designs
• Experience with Agile lifecycle processes including Scrum, Continuous Integration, and Test-Driven Development Methodologies
• Ability to work with minimal supervision and collaborate on small teams
• U.S. Person status is required as this position will require the ability to access U.S.-only data systems 

Preferred Requirements:

• Experience designing and implementing highly performant baseband signal processing in an FPGA
• Experience translating high level algorithms from Simulink/MATLAB or similar into RTL including FPGA Vendor IP implementations
• Experience developing and implementing software drivers (C/C++/Python) to interface with FPGA designs
• Experience with FPGA Ethernet IP blocks (1G/10G/40G/100G)
• Experience with Software-Defined Radios (SDRs) (e.g. Ettus, NI, HackRF)
• Experience with Analog Device Transceivers
• Experience in Ground or Airborne Sensors (Radars, EO/IR, EW, etc.)
• Experience with Time Synchronization technologies (NTP / PTP)
• Experience with HLS Synthesis and languages (C/C++/SystemC/Chisel)
• Experience with VHDL
• Experience with high-speed, multi-layer, digital printed circuit board (PCB) design
• Current or previous DoD security clearance 
• Experience with GPUs and/or AI engines
• Experience with git
• Experience with Bitbucket CI, Jenkins or similar CI/CD flows
• Experience with DoD & related System/SW Architectures and messaging standards (e.g. OMS, SOSA, Link-16, etc) 

Why CHAOS?

• Health Benefits: Medical, dental, and vision benefits 100% paid for by the company
• Additional benefits: 401k (+ 50% company match up to 6% of pay), FSA, HSA, life insurance, and more
• Our Perks: Free daily lunch, ‘No meeting Fridays’, unlimited PTO, casual dress code
• Compensation Components: Competitive base salaries, generous pre-IPO stock option grants, relocation assistance, and (coming soon!) annual bonuses
• Team Growth: 200 employees and counting across 5 global offices

The stated compensation range reflects only the targeted base compensation range and excludes additional earnings such as bonus, equity, and benefits. If your compensation requirements fall outside of the range, we still encourage you to apply. The salary range for this role is an estimate based on a range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations.

#LI-onsite

• Setup, execute and analyze test experiments per test procedures and record findings into test records
• Support with builds of test harnesses, racks, and environmental setups
• Improve and update automation, consistency, and coverage per engineering instructions
• Troubleshoot and repair of electrical, electronics and integrated circuits to the component level
• Maintain and calibrate electrical and/or mechanical test equipment
• Create assembly instructions and bill of materials for test equipment and fixtures
• Document test plans, user instructions and manuals
• Operate a clean and safe work environment
• Travel to test sites and external laboratories as required

• 4+ years of electronics testing experience in an R&D environment
• Familiarity with reading electrical system and component schematics
• Familiarity with product development life cycle, reliability, and compliance testing
• Familiarity with electronics test equipment such as power supplies, electronic loads, oscilloscope, function generators, data acquisition and measurement sensors
• Strong root cause analysis skills
• Excellent written, verbal, interpersonal and communication skills
• Able to pivot quickly between tasks and prioritize simultaneous tasks in a fast-paced environment
• Eligible to obtain and maintain an active U.S. Secret security clearance

• 5+ years electronics experience including testing
• Associate degree in Electrical/Electronics, Computer, Mechanical Technologies, or related fields
• Familiarity with IPC Quality Standards, IPC-610, IPC-620, J-STD and other assembly and inspection standards
• Experience with High Voltage and High Power Testing such as propulsion inverters and batteries
• Experience with equipment calibration and metrology
• Experience with electrical compliance testing such as EMI/EMC testing

About Vector Atomic

Vector Atomic, an IonQ company, is building quantum technology to transform navigation, timing, geophysical exploration, and telecommunications. Our team of engineers, scientists, software developers, and operations professionals works together to solve complex challenges and turn bold ideas into real-world solutions. We value collaboration, curiosity, and diverse perspectives, and we give every team member the opportunity to make an immediate impact while growing their skills. If you’re excited to work on breakthrough technology in a fast-paced, hands-on environment, we’d love to hear from you.

Location: This role is based onsite at our office in Pleasanton, CA.
Travel: Up to 5%
Job ID: 1590

The Role

As a Technical Lead for Real-Time Control Systems, you will provide the architectural vision and technical leadership necessary to build next-generation quantum instruments. You will be responsible for designing complex embedded systems on ARM SoC and ST Micro platforms, developing robust data acquisition pipelines, and implementing the control algorithms that drive precision sensing technology. This role sits at the intersection of hardware and software, requiring you to bridge the gap between physicists, electronics engineers, and firmware teams. Beyond writing production-quality code, you will serve as a mentor and strategist, driving coding standards, hardware bring-up strategies, and the continuous improvement of development infrastructure to ensure the scalability of quantum control frameworks.

Responsibilities

• Technical Leadership: Provide architectural direction for real-time control systems and lead technical discussions across hardware and firmware teams.
• System Architecture: Design system controllers on ARM SoC, including user-space drivers, libraries, and reusable frameworks for quantum system control.
• Software Development: Write high-performance, production-quality code in C/C++ and Rust, establishing team-wide best practices and coding standards.
• Control Theory & Implementation: Define and implement essential control algorithms, including robust control loops with reliable error handling for precision instruments.
• Hardware Collaboration: Lead board testing and hardware bring-up strategies in coordination with hardware engineers.
• Mentorship: Guide junior and senior engineers through code reviews, pair programming, and proactive technical coaching.
• Process Improvement: Drive the evolution of development processes, tooling, and infrastructure, including CI/CD and automated testing.
• Strategic Representation: Act as the primary technical voice for the team during cross-functional reviews and strategic planning sessions.

Requirements

• BS/MS in EE, CE, or CS with 8–12 years of experience, or a PhD with 8+ years of related work experience.
• To comply with the US export control laws, Vector Atomic employees must be U.S. citizens (born or naturalized), lawful U.S. permanent residents (i.e. green card holders), and certain categories of refugees, and asylees.
• Embedded Expertise: Demonstrated mastery of complex embedded system architecture and designing software systems from the ground up.
• Systems Programming: Deep understanding of hardware-software interfaces (TCP, UART, MMAP) and low-level system programming.
• Technical Problem Solving: Strong debugging and troubleshooting skills using profilers, debuggers, and simulation tools.
• Leadership: Proven ability to lead technical initiatives and influence engineering decisions across multi-disciplinary teams.
• Communication: Excellent verbal and written skills for articulating complex concepts to diverse audiences.
• Environment: Must be comfortable working in a laboratory setting.

Preferred Qualifications

• Rust Proficiency: Extensive experience developing production Rust systems, including async runtimes, concurrency patterns, and performance optimization.
• C++ Hybrid: Experience with embedded Linux alongside a strong understanding of C/C++ systems programming.
• Advanced Control Theory: Expert-level knowledge of PID, state-space controllers, and adaptive control algorithms.
• DSP & Algorithms: Experience with fixed-point algorithms, digital signal processing (DSP), and digital filter design.
• Hardware-Software Co-design: Strong background working with SoC/FPGA devices and Linux kernel/device driver development.
• Tooling & Scripting: Proficiency in Python for scientific libraries and developer tool creation.
• Lab Equipment Mastery: Hands-on experience using oscilloscopes, function generators, and voltmeters to verify code performance.
• DevOps for Embedded: Familiarity with CI/CD pipelines and automated testing frameworks tailored for hardware/firmware.

Compensation 

The approximate base salary range for this position is $163,430- $213,972. The total compensation package includes base, bonus, equity, and a range of benefit options found on our career site.   

**Benefits will be provided by Vector Atomic, an IonQ Company, and will differ from the benefits listed on the IonQ website.** 

Benefits

Vector Atomic values teamwork, open and honest discourse, and work-life balance. We offer competitive compensation and benefits including:

• Platinum-level family health coverage (medical, dental, vision)
• Health and dependent care Flexible Spending Accounts (FSA)
• Employer 401(k) contributions
• 20 days of paid time off & 11 paid holidays
• Paid parental leave
• Fully stocked kitchen

ABOUT THE JOB

We are seeking a highly motivated and experienced Electrical Engineer to join our team in Costa Mesa, California. You will work closely with the program leadership and a wide spectrum of cross-departments as part of a team focused on solving hard problems and changing the industry forever. In this role you will be responsible for designing and supporting the integration of various subsystems, supporting testing efforts, and ensuring overall system performance meets the required specifications and standards. Join our dynamic team and help us build the next generation of autonomous flight systems.

WHAT YOU'LL DO

• Full cycle PCB design including collecting requirements, schematic design, component selection, supervision or completion of layout, bring-up, test, debug and system integration
• Troubleshoot issues that span the electrical and software boundaries, with solid skills using both lab equipment (Oscilloscopes, DMM, etc.) and basic software debugging tools
• Development of payloads and subsystems (sensors, payload interfaces, power management, and networking)
• Develop system interconnect diagrams and define wire harnesses that connect electronic equipment within a subsystem
• Work closely with other electrical, mechanical, software, firmware, and test engineers to deliver fully functional products
• Work in a fast-paced environment supporting new developments and customer operated hardware
• Conduct peer-level and cross-discipline design reviews
• Design and support the integration & testing of an rotorcraft system through TRLs 3-8.
• Conduct vehicle platform system design & analysis as required by your supported program or effort
• Conduct design reviews, perform requirements analysis, and plan system verification to ensure compliance with project goals and industry standards
• Work within a dynamic team of multidisciplinary engineers and specialists throughout the life of product design, integration, and test effort

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 5+ years of experience designing, testing, and troubleshooting complex board designs
• Knowledge of modern analog and digital electronics and electronic circuits.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Familiarity with software development processes and tools such as git, Github, JIRA, etc
• Comfortable with a variety of electronic CAD tools (Altium preferred, Eagle and others acceptable)
• Experience in design for signal integrity / power integrity
• Experience with battery systems and ability to support alternate battery systems design
• Experience with high reliability systems
• Experience with radio frequency-based systems
• Experience with rapid payload/sensor integration
• Experience in designing and integrating high power electronics
• Experience in fieldable system design
• Comfortable in conducting worst case circuit or uncertainty analysis
• High-ownership and a bias toward action – if you see a problem, you want to solve and fix it
• Eligible to obtain and maintain an active U.S. Secret security clearance
• Ability to travel 25% with potential surges above 25%

PREFERRED QUALIFICATIONS

• Experience designing electrical and power systems for autonomous rotorcraft.
• Experience with battery systems both primary and secondary chemistries.
• Experience with High Voltage Power Electronics.
• Experience with inverters and high power electric motors.
• Understanding of MIL-STD-461, MIL-STD-810G
• Outstanding leadership and interpersonal skills
• Familiarity with running a qualification campaign for flight hardware
• Familiarity with designing for rugged environments
• Experience with electro-mechanical and electrical design concepts
• Experience with Formula SAE, Baja SAE, Design Build Fly, etc.

ABOUT THE TEAM

The Battlespace Awareness (BA) team develops state-of-the-art radar systems, deployed to tackle the most significant security challenges of America and its allies. Working across hardware, software, and firmware; in both the RF and digital domains; the team delivers radar architectures that enable advanced surveillance, reconnaissance, and targeting in the contemporary and future battlespace. The Radar team is responsible for all aspects of radar system development; from concepts and architectures through to fielding and sustainment. In this role, you will work closely with an interdisciplinary technical team to define radar architectures, design solutions, build prototypes, perform testing, and mature the prototypes into products.
 

ABOUT THE JOB

We are looking for a Senior FPGA Engineer to join our rapidly growing team in Costa Mesa, CA. In this role, you will be the technical lead for FPGA development supporting our airborne radar products, establishing the foundation for FPGA design processes and best practices. You will be responsible for translating algorithmic requirements into FPGA implementations, leading signal processing design efforts, and collaborating with our Fort Collins team to ensure seamless integration across projects. This will require expertise in FPGA design, signal processing, RTL development (SystemVerilog/VHDL), and Xilinx toolchains. If you are a self-directed technical leader who thrives on establishing new capabilities and can take an algorithm document and independently drive it through to hardware implementation, then this role is for you.
 

WHAT YOU'LL DO

• Lead FPGA architecture, design, and verification efforts for airborne radar systems from concept through production
• Translate signal processing algorithms into efficient, high-performance FPGA implementations on Xilinx SOC/FPGA platforms
• Establish and drive robust FPGA design processes, coding standards, and verification methodologies for the airborne products team
• Collaborate with the Battlespace Awareness engineering team to ensure design consistency and knowledge transfer across sites
• Design and implement digital signal processing chains for radar systems, including data acquisition, filtering, and real-time processing
• Perform timing analysis, resource optimization, and debugging of complex FPGA designs
• Develop and maintain design documentation, including architecture specifications, design reviews, and verification plans
• Mentor and guide other engineers as the team scales FPGA capabilities 

REQUIRED QUALIFICATIONS

• Bachelors degree in electrical engineering, electronics engineering, computer engineering or related field.
• 12+ years of professional experience in FPGA design and development
• Strong expertise in RTL design using SystemVerilog and/or VHDL
• Demonstrated experience with Xilinx FPGA devices and development tools (Vivado, Quartus, etc.)
• Proven experience in digital signal processing implementation on FPGAs
• Self-directed technical leadership with ability to independently drive projects from requirements to implementation
• Experience with FPGA verification methodologies and simulation tools
• Strong understanding of timing closure, resource optimization, and FPGA design constraints
• Eligible to obtain and maintain an active U.S. Secret security clearance 

PREFERRED QUALIFICATIONS

• Experience with radar systems or software-defined radio development
• Familiarity with high-speed interfaces (PCIe, Ethernet, JESD204B, etc.)
• Experience with Xilinx Zynq UltraScale+, Altera AgileX, or RFSoC platforms
• Knowledge of embedded software development for FPGA SoC platforms
• Experience with MATLAB and algorithm-to-hardware workflows
• Understanding of RF systems and digital front-end design
• Familiarity with DO-254 or similar hardware design standards for airborne systems
• Experience with version control (Git) and continuous integration workflows
• Background in aerospace or defense systems development

CHAOS Industries is redefining modern defense with a multi-product portfolio that gives the ultimate advantage—domain dominance. The company's products are powered by Coherent Distributed Networks (CDN™), empowering warfighters, commercial air operators, and border protection teams to act faster, adapt rapidly, and stay ahead of evolving threats. 

CHAOS Industries was founded in 2022 and has raised a total of $1 billion in funding from leading investors, including 8VC, Accel, and Valor Equity Partners. The company is headquartered in Los Angeles, with offices in Washington, D.C., San Francisco, San Diego, Seattle, and London. For more information, please visit www.chaosinc.com.

Role Overview: 

CHAOS is seeking a Principal Hardware-in-the-Loop (HIL) Engineer to lead the architecture, development, and deployment of advanced HIL simulation environments supporting high-reliability effector platforms. This role is responsible for defining scalable, high-fidelity validation frameworks that enable full system integration testing across multiple programs—bridging software, autonomy, and flight hardware. 

This position spans the full lifecycle of HIL development, from early requirements shaping and simulation architecture through hardware/software integration, automated test development, system validation, and transition to flight test. The ideal candidate is a highly experienced, hands-on engineer who can lead complex HIL efforts, guide other engineers, and ensure consistent, high-quality validation approaches across programs. 

This is a full-time, on-site position in Hawthorne, CA. 

 
Responsibilities: 

• Lead the architecture, design, and development of HIL test benches for full effector system integration, including flight controllers, ESCs, sensors, and ground control systems 

• Define HIL strategy, fidelity requirements, and validation approaches to ensure comprehensive system-level test coverage prior to flight 

• Establish reusable approaches for HIL system design, model integration, and test automation across programs 

• Architect and integrate high-fidelity simulation models (flight dynamics, actuator, and sensor models) that accurately replicate real-world behavior 

• Lead integration of hardware components into HIL systems, including flight computers, ESCs, communication links, sensors, and power systems 

• Drive development of automated test frameworks, regression infrastructure, and CI/CD integration for continuous validation of software and firmware 

• Guide debugging and root cause analysis of complex hardware-software interactions using HIL data, logs, and telemetry  

• Collaborate with GNC, software, and systems engineering teams to define verification strategies, test plans, and acceptance criteria across programs 

• Own, maintain, and improve test infrastructure, including simulation software, real-time targets, and data acquisition systems 

• Document test methodologies, procedures, and results clearly for cross-functional team use 

• Support transition of HIL-validated systems to integration and flight test phases 

Minimum Requirements: 

• Bachelor's degree in Engineering, Computer Science, or a related field 

• 10+ years of experience in hardware-in-the-loop testing, embedded systems integration, or a closely related discipline 

• Hands-on experience building and operating HIL or SIL simulation environments for embedded or autonomous systems 

• Proficiency in real-time simulation platforms (e.g., dSPACE, NI VeriStand, or similar) 

• Strong programming skills in Python and/or C/C++ for test automation and system scripting 

• Familiarity with flight controller software such as PX4, ArduPilot, or equivalent 

• Experience with communication protocols common in drone systems (MAVLink, CAN, UART, SPI, I2C) 

• Solid understanding of effector system architecture, including propulsion, navigation, and control loops 

• Experience with version control systems and CI/CD pipelines for automated testing 

• Strong analytical, debugging and root cause analysis skills across hardware, software, and simulation domains 

• Demonstrated ability to lead technical efforts and guide engineers through complex integration and troubleshooting challenges 

• Ability to obtain and maintain a U.S. security clearance 

Preferred Requirements: 

• Advanced degree (MS or PhD) in Engineering or related field 

• Experience with ROS or ROS 2 for simulation and integration testing 

• Strong background in flight dynamics, control systems, or GNC model development (MATLAB/Simulink or similar) 

• Experience correlating simulation environments with real-world flight test data 

• Familiarity with FPGA-based simulation, embedded Linux systems, or real-time computing architectures 

• Experience with RF systems, GPS signal simulation, or sensor fusion validation 

• Experience establishing reusable simulation frameworks or model libraries across programs 

• Exposure to flight test operations and transitioning systems from HIL to field testing 

• FAA Part 107 certification or equivalent UAV operational credentials 

Why CHAOS?

• Health Benefits: Medical, dental, and vision benefits 100% paid for by the company
• Additional benefits: 401k (+ 50% company match up to 6% of pay), FSA, HSA, life insurance, and more
• Our Perks: Free daily lunch, ‘No meeting Fridays’, unlimited PTO, casual dress code
• Compensation Components: Competitive base salaries, generous pre-IPO stock option grants, relocation assistance, and (coming soon!) annual bonuses
• Team Growth: 250 employees and counting across 5 global offices

The stated compensation range reflects only the targeted base compensation range and excludes additional earnings such as bonus, equity, and benefits. If your compensation requirements fall outside of the range, we still encourage you to apply. The salary range for this role is an estimate based on a range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. 

Recruiting Agencies: CHAOS Industries does not accept unsolicited resumes or outreach. Unsolicited submissions will not be reviewed or compensated.

#LI-onsite

CHAOS Industries is redefining modern defense with a multi-product portfolio that gives the ultimate advantage—domain dominance. The company's products are powered by Coherent Distributed Networks (CDN™), empowering warfighters, commercial air operators, and border protection teams to act faster, adapt rapidly, and stay ahead of evolving threats. 

CHAOS Industries was founded in 2022 and has raised a total of $1 billion in funding from leading investors, including 8VC, Accel, and Valor Equity Partners. The company is headquartered in Los Angeles, with offices in Washington, D.C., San Francisco, San Diego, Seattle, and London. For more information, please visit www.chaosinc.com.

Role Overview: 

CHAOS is seeking a skilled Hardware-in-the-Loop (HIL) Engineer to join our hardware engineering team. In this role, you will design, build, and maintain HIL simulation environments that enable full system integration testing of our Effector platforms — bridging the gap between software development and flight hardware. You will work closely with GNC, software, and systems engineers to ensure our vehicles are thoroughly validated before ever leaving the ground. 

The ideal candidate has hands-on experience building and operating HIL or SIL simulation environments for embedded or autonomous systems. 

This is a full-time, on-site position in Hawthorne, CA. 

 
Responsibilities: 

• Design and develop HIL test benches for full effector system integration, including flight controllers, ESCs, sensors, and ground control systems 

• Integrate high-fidelity simulation models (flight dynamics, actuator, and sensor models) that accurately replicate real-world behavior 

• Integrate hardware components - including autopilot boards, communication links, power systems, and peripherals - into HIL systems 

• Develop automated test suites and regression frameworks to validate software and firmware changes against HIL environments 

• Collaborate with software and integration/test engineers to define test plans and acceptance criteria for new features and hardware releases 

• Debug complex hardware-software interactions by analyzing HIL test data, logs, and telemetry 

• Maintain and improve test infrastructure, including simulation software, real-time targets, and data acquisition systems 

• Document test methodologies, procedures, and results clearly for cross-functional team use 

• Support transition of HIL-validated systems to integration and flight test phases 

Minimum Requirements: 

• Bachelor's degree in Engineering, Computer Science, or a related field. 

• 3+ years of experience in hardware-in-the-loop testing, embedded systems integration, or a closely related discipline 

• Hands-on experience building and operating HIL or SIL simulation environments for embedded or autonomous systems 

• Proficiency in real-time simulation platforms (e.g., dSPACE, NI VeriStand, or similar) 

• Strong programming skills in Python and/or C/C++ for test automation and system scripting 

• Familiarity with flight controller software such as PX4, ArduPilot, or equivalent 

• Experience with communication protocols common in drone systems (MAVLink, CAN, UART, SPI, I2C) 

• Solid understanding of effector system architecture, including propulsion, navigation, and control loops 

• Experience with version control systems and CI/CD pipelines for automated testing 

• Strong analytical and troubleshooting skills across hardware and software domains 

• Ability to obtain and maintain a U.S. security clearance 

Preferred Requirements: 

• Master’s degree in Engineering 

• Experience with ROS or ROS 2 for simulation and integration testing 

• Familiarity with MATLAB/Simulink for flight dynamics or control system modeling 

• Exposure to flight test operations and transitioning systems from HIL to field testing 

• Experience with FPGA firmware development or embedded Linux environments 

• Knowledge of RF systems, GPS signal simulation, or sensor fusion techniques 

• FAA Part 107 certification or equivalent UAV operational credentials 

Why CHAOS?

• Health Benefits: Medical, dental, and vision benefits 100% paid for by the company
• Additional benefits: 401k (+ 50% company match up to 6% of pay), FSA, HSA, life insurance, and more
• Our Perks: Free daily lunch, ‘No meeting Fridays’, unlimited PTO, casual dress code
• Compensation Components: Competitive base salaries, generous pre-IPO stock option grants, relocation assistance, and (coming soon!) annual bonuses
• Team Growth: 250 employees and counting across 5 global offices

The stated compensation range reflects only the targeted base compensation range and excludes additional earnings such as bonus, equity, and benefits. If your compensation requirements fall outside of the range, we still encourage you to apply. The salary range for this role is an estimate based on a range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. 

Recruiting Agencies: CHAOS Industries does not accept unsolicited resumes or outreach. Unsolicited submissions will not be reviewed or compensated.

#LI-onsite

CHAOS Industries is redefining modern defense with a multi-product portfolio that gives the ultimate advantage—domain dominance. The company's products are powered by Coherent Distributed Networks (CDN™), empowering warfighters, commercial air operators, and border protection teams to act faster, adapt rapidly, and stay ahead of evolving threats. 

CHAOS Industries was founded in 2022 and has raised a total of $1 billion in funding from leading investors, including 8VC, Accel, and Valor Equity Partners. The company is headquartered in Los Angeles, with offices in Washington, D.C., San Francisco, San Diego, Seattle, and London. For more information, please visit www.chaosinc.com.

Role Overview: 

CHAOS is seeking a Sr. Principal Electrical Engineer with expertise in digital circuit design and signal integrity analysis to serve as a technical authority for high-reliability digital electronics used in aerospace and military applications. This role spans the full product lifecycle, from early architecture and requirements shaping through detailed design, analysis, verification, production support, and fielded system sustainment. 

The ideal candidate is a senior digital hardware technical authority with deep high-speed board design, signal integrity, and power integrity expertise; a track record of setting design direction across programs; and the ability to guide cross-disciplinary teams through ambiguous, high-consequence hardware challenges. 

This is a full-time, on-site position in Hawthorne, CA. 

 
Responsibilities: 

• Act as a technical authority for high-speed digital circuit design, signal integrity, and power integrity across multiple programs or product lines 

• Lead design and review of complex PCBAs involving FPGAs, processors, memory devices, data converters, clocks, high-speed serial interfaces, and mixed-signal boundaries 

• Lead digital hardware architecture trades and define design approaches that satisfy system performance, schedule, manufacturability, reliability, and qualification requirements 

• Set standards, procedures, and review practices for digital board design, stack-up definition, layout constraints, SI/PI analysis, bring-up, and verification 

• Resolve complex cross-disciplinary technical issues involving digital hardware, FPGA/software interfaces, RF coexistence, power distribution, EMI/EMC, thermal behavior, and mechanical packaging 

• Guide PCB layout strategy for controlled impedance, length matching, return paths, grounding, shielding, decoupling, power distribution networks, and isolation of sensitive circuits 

• Serve as the senior technical interface with customers, vendors, suppliers, and internal program leadership for digital hardware topics 

• Mentor engineers and coordinate technical activities across digital, FPGA, embedded software, RF, power, mechanical, manufacturing, and test teams 

• Serve as technical authority for hardware integration, verification, qualification testing, production transition, failure analysis, and field support 

Minimum Requirements: 

• Bachelor's degree in Electrical Engineering with 15+ years of relevant engineering experience 

• Demonstrated technical leadership of complex high-speed digital hardware 

• Strong understanding of digital design fundamentals, including timing, clocking, controlled impedance, signal integrity, power integrity, grounding, decoupling, and return-path management 

• Extensive experience with digital board design involving FPGAs, processors, memory devices, high-speed data converters, and board-level communication interfaces 

• Experience setting PCB layout strategy and design review criteria for high-speed digital, mixed-signal, and high-reliability electronics 

• Hands-on experience leading board bring-up, system integration, troubleshooting, verification, qualification, production transition, and failure analysis activities 

• Demonstrated ability to set technical direction and lead engineers through ambiguous, cross-disciplinary hardware challenges 

• Ability to obtain and maintain a U.S. security clearance 

Preferred Requirements: 

• Advanced Degree (MS or PhD) in Electrical Engineering, Systems Engineering, Physics, Mathematics or related discipline 

• Experience with Avionics platforms 

• Experience using Altium Designer 

• Expertise with signal integrity and/or power integrity analysis tools such as HyperLynx, Sigrity, ADS, Ansys SIwave, or equivalent 

• Experience with DDR, PCIe, Ethernet, JESD204, SERDES, LVDS, or similar high-speed interfaces in high-reliability systems 

• Familiarity with EMI/EMC mitigation techniques and aerospace standards such as RTCA/DO-160, MIL-STD-461, MIL-STD-810, and MIL-STD-1275 

• Experience establishing design standards, analysis templates, qualification approaches, or review processes for engineering teams 

• Experience designing for manufacturability and leading transition from prototype hardware to production 

Why CHAOS?

• Health Benefits: Medical, dental, and vision benefits 100% paid for by the company
• Additional benefits: 401k (+ 50% company match up to 6% of pay), FSA, HSA, life insurance, and more
• Our Perks: Free daily lunch, ‘No meeting Fridays’, unlimited PTO, casual dress code
• Compensation Components: Competitive base salaries, generous pre-IPO stock option grants, relocation assistance, and (coming soon!) annual bonuses
• Team Growth: 250 employees and counting across 5 global offices

The stated compensation range reflects only the targeted base compensation range and excludes additional earnings such as bonus, equity, and benefits. If your compensation requirements fall outside of the range, we still encourage you to apply. The salary range for this role is an estimate based on a range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. 

Recruiting Agencies: CHAOS Industries does not accept unsolicited resumes or outreach. Unsolicited submissions will not be reviewed or compensated.

#LI-onsite

CHAOS Industries is redefining modern defense with a multi-product portfolio that gives the ultimate advantage—domain dominance. The company's products are powered by Coherent Distributed Networks (CDN™), empowering warfighters, commercial air operators, and border protection teams to act faster, adapt rapidly, and stay ahead of evolving threats. 

CHAOS Industries was founded in 2022 and has raised a total of $1 billion in funding from leading investors, including 8VC, Accel, and Valor Equity Partners. The company is headquartered in Los Angeles, with offices in Washington, D.C., San Francisco, San Diego, Seattle, and London. For more information, please visit www.chaosinc.com.

Role Overview: 

CHAOS is seeking a Staff Electrical Engineer with expertise in digital circuit design and signal integrity analysis to lead the design and integration of high-reliability digital electronics for aerospace and military applications. This role spans the full product lifecycle, from requirements definition and architecture trades through schematic design, layout guidance, analysis, board bring-up, verification, production support, and field testing of mission-critical systems. 

The ideal candidate is a digital circuit designer with strong hands-on board design experience, practical signal integrity and power integrity judgment, and the ability to coordinate complex technical tasks across FPGA, software, RF, power, mechanical, manufacturing, and test teams with little supervision. 

This is a full-time, on-site position in Hawthorne, CA. 

 
Responsibilities: 

• Lead design of high-speed digital circuit cards and subsystems in accordance with customer requirements, applicable aerospace and military standards, and internal design practices 

• Design PCBAs involving FPGAs, processors, memory devices, data converters, clocks, high-speed serial interfaces, and mixed-signal boundaries 

• Contribute to digital hardware architectures, detailed schematics, stack-up recommendations, routing constraints, and design analyses for mission-critical electronics 

• Perform signal integrity and power integrity analysis for high-speed interfaces, memory buses, clocks, power distribution networks, and mixed-signal board environments 

• Define PCB layout constraints for controlled impedance, length matching, return paths, grounding, shielding, decoupling, and isolation of sensitive circuits 

• Collaborate with FPGA, embedded software, RF, power, mechanical, manufacturing, and test engineers to ensure digital hardware integrates cleanly within larger systems 

• Plan and support board bring-up, integration, troubleshooting, verification, qualification testing, and production transition activities 

• Generate and maintain schematics, analysis reports, design documentation, BOMs, interface documentation, and test plans 

• Serve as a technical interface with vendors, suppliers, and customers for digital hardware design topics 

Minimum Requirements: 

• Bachelor's degree in Electrical Engineering with 8+ years of relevant engineering experience 

• Experience designing high-speed digital hardware  

• Strong understanding of digital design fundamentals, including timing, clocking, controlled impedance, signal integrity, power integrity, grounding, decoupling, and return-path management 

• Experience with digital board design involving FPGAs, processors, memory devices, high-speed data converters, and board-level communication interfaces 

• Hands-on experience with hardware integration and lab test equipment, including oscilloscopes, logic analyzers, power supplies, and protocol or signal measurement equipment 

• Demonstrated ability to work independently on complex technical problems with a high level of attention to detail 

• Ability to obtain and maintain a U.S. security clearance 

Preferred Requirements: 

• Advanced Degree (MS or PhD) in Electrical Engineering, Systems Engineering, Physics, Mathematics or related discipline 

• Experience with Avionics platforms 

• Experience using Altium Designer 

• Experience with mixed RF, analog, power, and digital electronics in tightly integrated aerospace or defense hardware 

• Experience with DDR, PCIe, Ethernet, JESD204, SERDES, LVDS, or similar high-speed interfaces 

• Familiarity with EMI/EMC mitigation techniques and aerospace standards such as RTCA/DO-160, MIL-STD-461, MIL-STD-810, and MIL-STD-1275 

• Experience performing design margin analysis, derating analysis, tolerance analysis, or worst-case circuit analysis 

• Experience designing for manufacturability and transition to production 

Why CHAOS?

• Health Benefits: Medical, dental, and vision benefits 100% paid for by the company
• Additional benefits: 401k (+ 50% company match up to 6% of pay), FSA, HSA, life insurance, and more
• Our Perks: Free daily lunch, ‘No meeting Fridays’, unlimited PTO, casual dress code
• Compensation Components: Competitive base salaries, generous pre-IPO stock option grants, relocation assistance, and (coming soon!) annual bonuses
• Team Growth: 250 employees and counting across 5 global offices

The stated compensation range reflects only the targeted base compensation range and excludes additional earnings such as bonus, equity, and benefits. If your compensation requirements fall outside of the range, we still encourage you to apply. The salary range for this role is an estimate based on a range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. 

Recruiting Agencies: CHAOS Industries does not accept unsolicited resumes or outreach. Unsolicited submissions will not be reviewed or compensated.

#LI-onsite

About Epirus

Epirus is a high-growth technology company dedicated to overcoming the asymmetric challenges inherent to the future of national security. Epirus' flagship product, Leonidas, is a software-defined system built using intelligent power management techniques that allow power-hungry systems to do more with less.  

Job Summary: This is an exciting role in an innovative company. The ideal candidate for the position is someone who has experience developing high-performance real-time, autonomous software systems to rapidly develop next-generation products.  Employ your expertise by developing software systems that support functions such as autonomous target tracking, agile electronic beam-forming, and real-time hardware control.

Responsibilities: 

• Design and implement software of embedded devices and systems from requirements to production and deployment 
• Design, develop, code, test, and debug system software 
• Build real-time control software for a variety of projects 
• Analyze and enhance the efficiency, stability and scalability of system resources 
• Direct software QA and optimize I/O performance 
• Interface with hardware design and development 
• Assess third-party and open-source software 
• Lead teams to create minimum viable products from an idea 
• Derive software frameworks and architectures to accelerate development 
• Mentor peers to advance team velocity

Basic Qualifications:

• 5+ years of development in C and C++ 
• 3+ years working with embedded systems 
• Additional experience with one or more modern systems language(s): Python, Java, VHDL, Verilog, Go, Rust, etc. 
• Versed in multithreaded design (concurrency primitives, resource management, etc.) 
• Competent in computer science concepts (algorithms, data structures, object-oriented programming, etc.) 
• Strong foundations in mathematics and linear algebra 
• Adequate knowledge of reading schematics and data sheets for components 
• Bachelor’s degree in computer science or a similar discipline, Master’s degree preferred
• This is an on-site position; availability to work in our HQ in Torrance is required

Preferred Skills and Experience:

• 2+ years of experience with Xilinx FPGA and Embedded Cortex CPU architectures 
• Experience building software for real-time operating environments with specific latency requirements 
• Experience with Embedded Linux and/or software integration with FPGA firmware 
• Knowledge or experience with digital signal processing (DSP) or radio frequency (RF) technologies 
• User experience with DevOps Pipeline tools 
• Experience with Docker or Helm  
• Scrum Master Certification 
• Desire to mentor new hires 
• Exposure or interest in sensor fusion, machine learning, or AI

ITAR REQUIREMENTS: 

• To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.  

At Epirus, you’ll work with technical peers and great people—and get first crack at some of the defining technology challenges of our time. Here, “impossible” is just a challenge. We're a diverse, fast-growing team of change-makers fueling the future of energy with revolutionary solutions. Join us and rewrite the rules. 

Role Overview

SirenOpt is looking for a Staff Electrical Engineer – FPGA / MPSoC & Digital Signal Processing Systems to lead the architecture, design, implementation, and validation of high-performance programmable logic, embedded processing, and FPGA-based digital signal processing systems powering our next-generation metrology platform.

This is a hands-on, high-impact role for someone who enjoys working close to the technology, solving hard problems quickly, and helping shape products in an early-stage startup environment.

This role is ideal for an engineer who is energized by deep tech, thrives in cross-functional environments, and is motivated by the opportunity to build something genuinely new.

You will work closely with a small, highly capable team to turn advanced sensing, digital signal processing, and control concepts into robust, high-performance, field-ready systems.

What You’ll Do

• Lead the architecture, design, implementation, and validation of FPGA, MPSoC, and FPGA-based digital signal processing systems for SirenOpt’s metrology platform.
• Develop designs from concept through architecture definition, RTL development, modeling, simulation, verification, testbench development, bench testing, and system bring-up.
• Build and maintain robust simulation and verification environments to validate functionality, timing, performance, and reliability at both block and system levels.
• Design and implement FPGA-based digital signal processing pipelines for real-time sensing and metrology applications, including FIR filters, synchronization pipelines, control loops, and low-latency data paths.
• Implement, evaluate, and refine signal-processing and control algorithms such as PID, ADPLL, filtering, and signal-conditioning methods for high-performance measurement systems.
• Use MATLAB and Python for algorithm development, modeling, data analysis, system validation, and signal and electrical data characterization.
• Perform large-scale data analysis to evaluate signal quality, characterize system behavior, and guide design tradeoffs and performance optimization.
• Collaborate closely with hardware, electrical, software, algorithm, and systems engineers to support end-to-end FPGA, MPSoC, firmware, and hardware integration.
• Read and interpret schematics to understand board-level architecture, interfaces, signal paths, power domains, and subsystem dependencies.
• Bring up new boards in the lab, troubleshoot issues independently, and debug hardware/firmware interactions using oscilloscopes, logic analyzers, signal generators, power supplies, and related lab equipment.
• Help translate frontier R&D concepts into scalable, reliable, and manufacturable digital systems.

What We’re Looking For

• B.S., M.S., or PhD in Electrical Engineering, Computer Engineering, or a related field, with 5+ years of relevant industry experience.
• Strong experience with end-to-end FPGA and MPSoC design, including architecture, RTL development, simulation, synthesis, timing closure, verification, and board bring-up.
• Advanced experience with FPGA-based digital signal processing for real-time systems, including FIR filters, synchronization methods, streaming pipelines, and control-oriented digital design.
• Strong experience with algorithm modeling and analysis using MATLAB and Python.
• Experience implementing and validating signal-processing and control techniques such as PID, ADPLL, filtering, and signal characterization workflows.
• Strong command of HDL/RTL implementation for digital signal processing, control, and high-performance data-path design.
• Hands-on experience developing testbenches, verification environments, and bench-level validation workflows.
• Strong understanding of firmware/hardware integration and system-level debugging in tightly coupled digital platforms.
• Ability to read and understand electrical schematics and work effectively at the board and subsystem level.
• Proven experience troubleshooting and bringing up hardware in the lab using standard electrical test equipment.
• Experience working in a fast-moving, multidisciplinary environment with a high degree of ownership and technical independence.
• Strong communication skills and a practical, problem-solving mindset.

Nice to Have

• Experience providing technical leadership for hardware and firmware engineering teams in complex product development environments.
• Experience with image processing or vision-related algorithm pipelines.
• PCB design experience, including familiarity with board-level layout considerations and signal integrity tradeoffs.
• Experience with high-speed interfaces, instrumentation systems, or real-time sensing platforms.
• Familiarity with mixed-signal systems and integration with ADCs, DACs, sensors, and embedded processors.
• Exposure to metrology systems, scientific instrumentation, or advanced materials applications.

Why Join SirenOpt

• Help define a new category in advanced materials metrology.
• Work on genuinely novel deep-tech hardware with real scientific and industrial impact.
• Join an early-stage team where your decisions directly shape the product, technology, and company.
• Build systems at the intersection of plasma science, electronics, sensing, AI-driven analytics, programmable logic, and advanced digital signal processing.
• Contribute to technology that can expand what researchers and industry teams are able to see, measure, and optimize.

ABOUT THE TEAM

Anduril’s Air and Ground Deterrence (AGD) Division develops integrated robotic systems designed to provide multi-domain situational awareness and force protection across land, sea, and air. From detection to tracking, identification, deterrence, and defeat, our family of networked sensors and effectors enables our customers to rapidly detect and identify potential threats. close the kill chain against a broad range of Unmanned Aerial System (UAS) threats.

Working across product, engineering, sales, logistics, operations, and mission success, the multidisciplinary Sentry Hardware team with AGD serves as the key system integrator of the Anduril Sentry Family of Systems (FoS). In particular, the Sentry Electrical Engineering Team drives end-to-end development, from electrical architecture and ruggedized hardware design to verification, integration, and test, ensuring scalable, production and mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and other key stakeholders.

ABOUT THE JOB

The Sentry Engineering team builds hardware products and systems that leverage artificial intelligence to provide highly accurate, persistent autonomous awareness across land, sea and air. With an AI-enabled edge processing, continuous 360 pan / tilt capability, and a variety of radars and sensors, Sentry can autonomously identify, detect, and track objects of interest to bring increased awareness to borders, military bases, oil and gas pipelines, airports and other critical infrastructure.

We are looking for an Electrical Sustainment Engineer to join our rapidly growing team in Irvine, CA. This role will own rapidly developed, ruggedized electronics design in addition to scaling legacy design concepts to support full-rate production. In this role, you will partner with our Architecture and Product Management team to help drive system requirements prior to owning full PCB and/or electrical system design. This will require identifying high risk areas, creating and validating electronics designs for embedded compute and/or power systems, and testing for long term-reliability while considering manufacturability and testability in the design.

If you are someone who enjoys designing mission-critical electrical circuit cards and integrated systems with the freedom to drive product development from often undefined requirements then this role is for you.

WHAT YOU’LL DO

• Take ownership as the main point of contact for electrical integration activities.
• Provide hands on and in-field support of prototype and production level product.
• Collaborate with mechanical engineers to optimize selection, design and integration of high power components, modules and distribution.
• Trade-off component and module selections against size, weight, power and EMC requirements.
• Collaborate with design team to achieve reliability goals at a system level in context of concepts of operation.

REQUIRED QUALIFICATIONS

• Self starter with the ability to design digital & analog electronics from concept and functional prototype, to production ready product.
• Ability to troubleshoot existing hardware to find root cause of issues and implement improvements to improve the design.
• Develop clear documentation to capture design requirements, specifications, test coverage, and test reports.
• Complete full cycle PCB design including collecting requirements, schematic design, component selection, completion of layout, bring-up, test, debug, validation, characterization, and integration with the system.
• Work closely with other mechanical, software, firmware, and test engineers to deliver fully functional products.
• Work in a fast-paced environment supporting new developments, active deployments, and customer operated hardware.
• Concurrently manage involvement in multiple projects at various stages.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

PREFERRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 4+ years of experience designing, testing and troubleshooting complex board designs and products.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with switch mode power supply design and testing.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Exceptional organization and communication skills (both written and oral).
• Proficient with Altium Designer or equivalent electronic design automation design tools.
• Proficiency with scripting languages (Python, Matlab, etc.)
• Ability to root cause Full stack HLOS application to hardware component level issues.

ABOUT THE TEAM

Anduril's Space team is dedicated to expanding our AI-powered capabilities into the final frontier, enhancing Space Domain Awareness, Space Control, and Command and Control for U.S. military and allied partners. We're developing fully integrated hardware and software systems, including Lattice for Space Missions and modular payloads, to address growing threats in space and ensure our Guardians maintain a decisive advantage in this contested warfighting domain.

ABOUT THE JOB

We are looking for a Sr. FPGA/SoC Engineer to join our rapidly growing team in Costa Mesa, CA. In this role, you will be responsible for developing FPGA/SoC firmware and overseeing 3rd party development. You will work with internal and external design teams to develop products for use in orbit. This will require architecture, RTL generation and debug.

WHAT YOU’LL DO

• Rapidly develop, test, and implement FPGA designs using Xilinx SoC/FPGA.
• Integrate third-party vendors IP, as necessary.
• Work with third-party developers to ensure timely product success
• Perform digital circuit design, VHDL/Verilog coding, synthesis, place and route, timing closure, simulation, and verification. 
• Participate in entire design life cycle: from requirements and concept, through design and hand on testing/board bring up.
• Implement a variety of signal types such as high speed comms (ethernet, serial), signal processing (analog, digital).
• Ensure designs meet all relevant safety and performance standards, with traceability back to top-level system requirements, as necessary.
• Investigate and resolve bugs found during hand on testing (at HDL level and system level).

REQUIRED QUALIFICATIONS

• 5 years of experience preferred in FPGA/HDL hardware design. Experience with Xilinx SoC (Versal) is highly preferred.
• Familiarity with design software like Vivado (preferred), ModelSim, or Quartus.
• Proficient in VHDL and/or Verilog.
• Ability to work in a fast-paced, challenging environment.
• Excellent problem-solving and organizational skills.
• Strong communication and teamwork skills.
• Experience in SoC hardware bring-up, preferably on ARM-based systems.
• Eligible to obtain and maintain an active U.S. Secret security clearance. 

PREFERRED QUALIFICATIONS

• Working knowledge of designing for safety-critical functions.
• FPGA interfaces and high speed busses.
• Experience with systems on a Chip (SoC).
• Low-level firmware (C/C++) development for bring-up and test.
• Experience writing HDL for Space applications.

ABOUT THE TEAM

Anduril’s Air and Ground Deterrence (AGD) Division develops integrated robotic systems designed to provide multi-domain situational awareness and force protection across land, sea, and air. From detection to tracking, identification, deterrence, and defeat, our family of networked sensors and effectors enables our customers to rapidly detect and identify potential threats. close the kill chain against a broad range of Unmanned Aerial System (UAS) threats.

Working across product, engineering, sales, logistics, operations, and mission success, the multidisciplinary Sentry Hardware team with AGD serves as the key system integrator of the Anduril Sentry Family of Systems (FoS). In particular, the Sentry Electrical Engineering Team drives end-to-end development, from electrical architecture and ruggedized hardware design to verification, integration, and test, ensuring scalable, production and mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and other key stakeholders.

ABOUT THE JOB

The Sentry Engineering team builds hardware products and systems that leverage artificial intelligence to provide highly accurate, persistent autonomous awareness across land, sea and air. With an AI-enabled edge processing, continuous 360 pan / tilt capability, and a variety of radars and sensors, Sentry can autonomously identify, detect, and track objects of interest to bring increased awareness to borders, military bases, oil and gas pipelines, airports and other critical infrastructure.

We are looking for an Electrical Engineer to join our rapidly growing team in Irvine, CA. This role will own rapidly developed, ruggedized electronics design in addition to scaling legacy design concepts to support full-rate production. In this role, you will partner with our Architecture and Product Management team to help drive system requirements prior to owning full PCB and/or electrical system design. This will require identifying high risk areas, creating and validating electronics designs for embedded compute and/or power systems, and testing for long term-reliability while considering manufacturability and testability in the design.

If you are someone who enjoys designing mission-critical electrical circuit cards and integrated systems with the freedom to drive product development from often undefined requirements then this role is for you.

WHAT YOU’LL DO

• Take ownership as the main point of contact for electrical integration activities.
• Provide hands on and in-field support of prototype and production level product.
• Collaborate with mechanical engineers to optimize selection, design and integration of high power components, modules and distribution.
• Trade-off component and module selections against size, weight, power and EMC requirements.
• Collaborate with design team to achieve reliability goals at a system level in context of concepts of operation.

REQUIRED QUALIFICATIONS

• Minimum 5 years of professional experience
• Self starter with the ability to design digital & analog electronics from concept and functional prototype, to production ready product.
• Ability to troubleshoot existing hardware to find root cause of issues and implement improvements to improve the design.
• Develop clear documentation to capture design requirements, specifications, test coverage, and test reports.
• Complete full cycle PCB design including collecting requirements, schematic design, component selection, completion of layout, bring-up, test, debug, validation, characterization, and integration with the system.
• Work closely with other mechanical, software, firmware, and test engineers to deliver fully functional products.
• Work in a fast-paced environment supporting new developments, active deployments, and customer operated hardware.
• Concurrently manage involvement in multiple projects at various stages.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

PREFERRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 5+ years of experience designing, testing and troubleshooting complex board designs and products.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with switch mode power supply design and testing.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Exceptional organization and communication skills (both written and oral).
• Proficient with Altium Designer or equivalent electronic design automation design tools.
• Proficiency with scripting languages (Python, Matlab, etc.)
• Ability to root cause Full stack HLOS application to hardware component level issues.

ABOUT THE TEAM

Anduril’s Air and Ground Deterrence (AGD) Division develops integrated robotic systems designed to provide multi-domain situational awareness and force protection across land, sea, and air. From detection to tracking, identification, deterrence, and defeat, our family of networked sensors and effectors enables our customers to rapidly detect and identify potential threats. close the kill chain against a broad range of Unmanned Aerial System (UAS) threats.

Working across product, engineering, sales, logistics, operations, and mission success, the multidisciplinary Sentry Hardware team with AGD serves as the key system integrator of the Anduril Sentry Family of Systems (FoS). In particular, the Sentry Electrical Engineering Team drives end-to-end development, from electrical architecture and ruggedized hardware design to verification, integration, and test, ensuring scalable, production and mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and other key stakeholders.

ABOUT THE JOB

The Sentry Engineering team builds hardware products and systems that leverage artificial intelligence to provide highly accurate, persistent autonomous awareness across land, sea and air. With an AI-enabled edge processing, continuous 360 pan / tilt capability, and a variety of radars and sensors, Sentry can autonomously identify, detect, and track objects of interest to bring increased awareness to borders, military bases, oil and gas pipelines, airports and other critical infrastructure.

We are looking for an Electrical Engineer to join our rapidly growing team in Irvine, CA. This role will own rapidly developed, ruggedized electronics design in addition to scaling legacy design concepts to support full-rate production. In this role, you will partner with our Architecture and Product Management team to help drive system requirements prior to owning full PCB and/or electrical system design. This will require identifying high risk areas, creating and validating electronics designs for embedded compute and/or power systems, and testing for long term-reliability while considering manufacturability and testability in the design.

If you are someone who enjoys designing mission-critical electrical circuit cards and integrated systems with the freedom to drive product development from often undefined requirements then this role is for you.

WHAT YOU’LL DO

• Take ownership as the main point of contact for electrical integration activities.
• Provide hands on and in-field support of prototype and production level product.
• Collaborate with mechanical engineers to optimize selection, design and integration of high power components, modules and distribution.
• Trade-off component and module selections against size, weight, power and EMC requirements.
• Collaborate with design team to achieve reliability goals at a system level in context of concepts of operation.

REQUIRED QUALIFICATIONS

• Minimum 5 years of professional experience
• Self starter with the ability to design digital & analog electronics from concept and functional prototype, to production ready product.
• Ability to troubleshoot existing hardware to find root cause of issues and implement improvements to improve the design.
• Develop clear documentation to capture design requirements, specifications, test coverage, and test reports.
• Complete full cycle PCB design including collecting requirements, schematic design, component selection, completion of layout, bring-up, test, debug, validation, characterization, and integration with the system.
• Work closely with other mechanical, software, firmware, and test engineers to deliver fully functional products.
• Work in a fast-paced environment supporting new developments, active deployments, and customer operated hardware.
• Concurrently manage involvement in multiple projects at various stages.
• Eligible to obtain and maintain an active U.S. Secret security clearance.

PREFERRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 5+ years of experience designing, testing and troubleshooting complex board designs and products.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with switch mode power supply design and testing.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Exceptional organization and communication skills (both written and oral).
• Proficient with Altium Designer or equivalent electronic design automation design tools.
• Proficiency with scripting languages (Python, Matlab, etc.)
• Ability to root cause Full stack HLOS application to hardware component level issues.

PsiQuantum’s mission is to build the first useful quantum computers—machines capable of delivering the breakthroughs the field has long promised. Since our founding in 2016, our singular focus has been to build and deploy million-qubit, fault-tolerant quantum systems. 

Quantum computers harness the laws of quantum mechanics to solve problems that even the most advanced supercomputers or AI systems will never reach. Their impact will span energy, pharmaceuticals, finance, agriculture, transportation, materials, and other foundational industries. 

Our architecture and approach is based on silicon photonics. By leveraging the advanced semiconductor manufacturing industry—including partners like GlobalFoundries—we use the same high-volume processes that already produce billions of chips for telecom and consumer electronics. Photonics offers natural advantages for scale: photons don’t feel heat, are immune to electromagnetic interference, and integrate with existing cryogenic cooling and standard fiber-optic infrastructure. 

In 2024, PsiQuantum announced government-funded projects to support the build-out of our first utility-scale quantum computers in Brisbane, Australia, and Chicago, Illinois. These initiatives reflect a growing recognition that quantum computing will be strategically and economically defining—and that now is the time to scale. 

PsiQuantum also develops the algorithms and software needed to make these systems commercially valuable. Our application, software, and industry teams work directly with leading Fortune 500 companies—including Lockheed Martin, Mercedes-Benz, Boehringer Ingelheim, and Mitsubishi Chemical—to prepare quantum solutions for real-world impact. 

Quantum computing is not an extension of classical computing. It represents a fundamental shift—and a path to mastering challenges that cannot be solved any other way. The potential is enormous, and we have a clear path to make it real. 

Come join us. 

Job Summary:

The mission of PsiQuantum's Principal Hardware Design Engineer role is to support the Electronics team by owning hardware designs integral to the underlying system of the quantum computer. This engineer will collaborate in cross-functional teams of thermal, mechanical, firmware, optical engineers. The designs will meet the requirements of the overall system architecture and physical framework of the quantum computer.

Responsibilities:

• Define, Design and deliver production ready high-speed embedded hardware systems.
• Design, create schematics, and oversee PCB layout of analog and digital circuitry consisting of but not limited to high-speed transceivers, 10+ Gbps electrical and optical data links, FPGA's, microcontrollers, clock distribution, and power distribution.
• Ensure signal integrity and EMI suppression is accounted for in all designs.
• Design and create test set-ups for testing of electro-optic modules.
• Characterize, optimize, and debug analog, digital, and electro-optic circuitry using equipment such as mixed signal & sampling oscilloscopes, vector network analyzers, signal generators, multimeters, DC power supplies.
• Develop software to drive measurements.
• Analyze data and extract key performance parameters.
• Maintain detailed documentation of hardware designs, test results, and design changes.
• Software tools:
  • Orcad Schematic Capture and Allegro PCB Layout
  • C++, Python, RTL (VHDL or Verilog)
  • Keysight PathWave ADS
  • Microsoft Office

Experience/Qualifications:

• 7 years of experience with a Master Degree.
• 9-12 years of experience with a B.S. Degree.
• Results oriented.
• Delivers on commitments.
• Attention to detail.
• Data-driven in decision-making.
• Strong problem-solving skills.
• Proven team player with an ability to work effectively across departments, sites, time zones in direct and matrix team environments.
• Excellent verbal and written communication skills with an ability to communicate effectively to a variety of audiences ranging from senior leadership and technical experts to entry-level staff.

PsiQuantum provides equal employment opportunity for all applicants and employees. PsiQuantum does not unlawfully discriminate on the basis of race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender identity, gender expression, national origin, ancestry, citizenship, age, physical or mental disability, military or veteran status, marital status, domestic partner status, sexual orientation, genetic information, or any other basis protected by applicable laws.

Note: PsiQuantum will only reach out to you using an official PsiQuantum email address and will never ask you for bank account information as part of the interview process. Please report any suspicious activity to recruiting@psiquantum.com.

We are not accepting unsolicited resumes from employment agencies.

Position  

The Hardware group at Eikon Therapeutics develops super-resolution, high-throughput optical instrumentation. The Hardware team is seeking a Senior Electrical Engineer to participate in future instrument development. As part of Eikon’s diverse team of biologists, medicinal chemists, hardware, and software engineers, you will design and deploy custom super-resolution microscopes and automated systems that will enable the exploration and quantification of Eikon’s high-content datasets. 

About you

You are an adventurous, passionate, and creative electrical engineer eager to apply your talents to empower a new way of discovering medicines in a highly interdisciplinary biopharmaceutical environment. You are excited about the challenges of developing cutting-edge hardware from the ground up to enable novel technologies and solve real-world problems, and you will bring to these challenges enthusiasm, high energy, intellectual curiosity, and technical excellence.

What you’ll do

• Join an engineering team designing super-resolution microscopes, including signal processing, motion control, robotics and system automation that enables Eikon’s scientific achievements
• Contribute to system design architecture of instrument control and data acquisition systems
• Design, prototype, and test electronic assemblies. Work closely with the microscopy and automation teams on design validation, implementation, and design improvements 
• Write FPGA and microcontroller firmware to implement required functionality. Write PC host code to test and characterize your design
• Build and release assemblies to be used by scientists and end-users, creating a full suite of documentation and test procedures 

Qualifications

• Bachelor's degree with 5 years of relevant experience or a Master’s degree with 3 years of relevant experience designing complex digital and analog circuity
• Systems design experience contributing to design architecture
• Ability and desire to bring your design through all stages including directing PCBA layout, working with contract manufacturers, testing, debugging and rework of high density PCBAs with fine pitch components 
• Strong experience debugging systems using oscilloscopes and logic analyzers
• Hands-on experience building test set-ups, reworking and modifying assemblies during development and testing
• Experience in high-speed circuitry design such as DDR memory interfaces 
• Proficiency with CAD systems for schematic capture and experience in directing and reviewing PCB layout for signal integrity and EMI 
• FPGA design and debug experience
• Experience in debugging and design validation of microcontrollers or SoC-based systems  
• Experience creating and implementing software and hardware test benches
• Demonstrated proficiency analog circuit design, analysis, and simulation / modeling 
• Strong communication and collaboration skills, presenting design ideas and receiving input from internal customers and product marketing
• Intel/Altera Quartusexperience and SystemVerilog proficiency is preferred 

At Eikon, employee compensation also includes bonus and equity compensation, in addition to several generous benefit programs, including:​

• 401k plan with company matching​
• Medical (premiums covered by Eikon at 95%), dental and vision insurance (premiums covered by Eikon at 100%)​
• Mental health and wellness benefits​
• Weeklong summer and winter holiday shutdowns​
• Generous paid time off and holiday policies​
• Life/AD&D Insurance (premiums covered by Eikon at 100%) and optional supplemental employee-paid life/AD&D policies ​
• Enhanced parental leave benefit​
• Daily subsidized lunch program when on-site​

The expected salary range for this role is $139,000 to $152,000 depending on skills, competency, and the market demand for your expertise.

The AGI (Artificial General Intelligence) Computing Lab is dedicated to solving the complex system-level challenges posed by the growing demands of future AI/ML workloads. Our team is committed to designing and developing scalable platforms that can effectively handle the computational and memory requirements of these workloads while minimizing energy consumption and maximizing performance. To achieve this goal, we collaborate closely with both hardware and software engineers to identify and address the unique challenges posed by AI/ML workloads and to explore new computing abstractions that can provide a better balance between the hardware and software components of our systems. Additionally, we continuously conduct research and development in emerging technologies and trends across memory, computing, interconnect, and AI/ML, ensuring that our platforms are always equipped to handle the most demanding workloads of the future. By working together as a dedicated and passionate team, we aim to revolutionize the way AI/ML applications are deployed and executed, ultimately contributing to the advancement of AGI in an affordable and sustainable manner. Join us in our passion to shape the future of computing!

Location:  Daily onsite presence at our San Jose, CA office / U.S. headquarters in alignment with our Flexible Work policy.

What You’ll Do

• Develop the verification infrastructure and automation environment involved in build, simulation, regression and triages.
• Lead the verification for IP blocks of an AI accelerator by working with architects and RTL engineers.
• Create direct or random testbench, define verification scope and test plans for both functional and performance validation, close the verification quality metrics.
• Provide comprehensive documentation of verification strategy and ensure test environment is easy to use.
• Mentor junior engineers when necessary
• Work cross-functionally in debugging failures with design, compiler and simulation engineers

What You Bring

• Bachelor’s with 10+ years, or Master’s with 8+ years, or PhD's with 5+ years of industry experience.
• Strong background in SoC or IP verification and test bench development using UVM, System Verilog, C/C++ and scripting languages such as Perl/Python.
• Experience verifying at multiple levels of logic from scratch, starting from complex IP blocks to dies to SoCs to full system testing
• Understanding RTL and strong overall debugging skills
• Prior experience with computational logic, interconnect networks and/or memory system is desirable
• Strong background in microarchitecture and computer architecture preferably in the area of AI accelerators
• Knowledge of FPGA and emulation platforms preferred
• Strong analytical and problem-solving skills
• Excellent communication and interpersonal skills
• Ability to work independently and as part of a team
• You’re inclusive, adapting your style to the situation and diverse global norms of our people.
• An avid learner, you approach challenges with curiosity and resilience, seeking data to help build understanding.
• You’re collaborative, building relationships, humbly offering support and openly welcoming approaches.

#LI-VL1

The AGI (Artificial General Intelligence) Computing Lab is dedicated to solving the complex system-level challenges posed by the growing demands of future AI/ML workloads. Our team is committed to designing and developing scalable platforms that can effectively handle the computational and memory requirements of these workloads while minimizing energy consumption and maximizing performance. To achieve this goal, we collaborate closely with both hardware and software engineers to identify and address the unique challenges posed by AI/ML workloads and to explore new computing abstractions that can provide a better balance between the hardware and software components of our systems. Additionally, we continuously conduct research and development in emerging technologies and trends across memory, computing, interconnect, and AI/ML, ensuring that our platforms are always equipped to handle the most demanding workloads of the future. By working together as a dedicated and passionate team, we aim to revolutionize the way AI/ML applications are deployed and executed, ultimately contributing to the advancement of AGI in an affordable and sustainable manner. Join us in our passion to shape the future of computing!

Location:  Daily onsite presence at our San Jose, CA office / U.S. headquarters in alignment with our Flexible Work policy.

What You’ll Do

• Develop the verification infrastructure and automation environment involved in build, simulation, regression and triages.
• Lead the verification for IP blocks of an AI accelerator by working with architects and RTL engineers.
• Create direct or random testbench, define verification scope and test plans for both functional and performance validation, close the verification quality metrics.
• Provide comprehensive documentation of verification strategy and ensure test environment is easy to use.
• Mentor junior engineers when necessary
• Work cross-functionally in debugging failures with design, compiler and simulation engineers

What You Bring

• Bachelor’s with 15+ years, or Master’s with 13+ years, or PhD's with 10+ years of industry experience.
• Strong background in SoC or IP verification and test bench development using UVM, System Verilog, C/C++ and scripting languages such as Perl/Python.
• Experience verifying at multiple levels of logic from scratch, starting from complex IP blocks to dies to SoCs to full system testing
• Understanding RTL and strong overall debugging skills
• Prior experience with computational logic, interconnect networks and/or memory system is desirable
• Strong background in microarchitecture and computer architecture preferably in the area of AI accelerators
• Knowledge of FPGA and emulation platforms preferred
• Strong analytical and problem-solving skills
• Excellent communication and interpersonal skills
• Ability to work independently and as part of a team
• You’re inclusive, adapting your style to the situation and diverse global norms of our people.
• An avid learner, you approach challenges with curiosity and resilience, seeking data to help build understanding.
• You’re collaborative, building relationships, humbly offering support and openly welcoming approaches.

#LI-VL1

Team Description:

The Brain Interfaces Soc Department delivers chip architecture and silicon implementation of neural recording and stimulation system-on-chip (SoC) for high-bandwidth brain-computer interfaces. We have crafted a team of exceptional engineers whose mission is to push the frontiers of what is possible today and define the future.

Job Description and Responsibilities:

We are looking for experienced and hands-on engineers with a creative and initiative mindset, who are interested in exploring the next-generation chip design with advanced architectures and hardware accelerators with a goal of enhancing the energy efficiency, information entropy, and scalability of our wireless brain-computer interfaces towards the physical limit of silicon technology. The ideal candidates are energetic people who get excited about building things, are highly analytical, and enjoy tackling new problems. You will have the opportunity to collaborate closely with chip designers, electrical engineers, algorithms engineers, and software engineers on a small, agile team. As a Digital IC Design Engineer Intern, your responsibilities will include:

• Micro-architecture design and RTL implementation of: 
• Low-power digital signal processors
• Low-power general-purpose hardware accelerators
• Low-power graphics processing units
• Low-power radio MAC/PHY
• Low-power serial link MAC/PHY
• Design and implementation of hardware/software interface with firmware engineers
• Application-specific architecture optimization including:
• Complex system modeling for energy and performance benchmarks
• Workload analysis and modeling
• Leveraging architecture-level design trade-offs with process technology and workload type
• Balancing energy efficiency and performance under manufacturing process variation 
• Complex system-on-chip verification
• Behavioral level modeling and model equivalence check
• FPGA emulation
• Analog mixed-signal co-simulation
• Design for testability 
• Collaboration on silicon bring-up tests with silicon validation engineers 

Required Qualifications:

• Evidence of exceptional ability in electrical engineering, computer science, or computer engineering
• 2+ years of experience in digital design
• Proficient in SystemVerilog, C/C++, Python
• Experience working on complex digital systems from architecture, microarchitecture, and RTL, using industry standard tools
• Experience in designing digital signal processing pipelines, from algorithm to RTL

Preferred Qualifications:

• Experience in architecture optimization with process technology customization
• Experience in the verification of complex digital systems, using industry standard tools
• Experience in the physical design of complex digital systems, using industry standard tools
• Experience testing and debugging digital system-on-a-chips
• Functional modeling experience and logic verification with SystemVerilog, SystemC/C++, or UVM 
• Experience automating tool flows
• Experience with embedded design
• Experience in processor instruction set architecture design
• Experience in compiler back-end design and customization
• Experience designing PCBs or writing firmware.

Expected Compensation:

The anticipated hourly rate for this position is listed below.

California Hourly Flat Rate:
$35/Hr USD

Team Description:

We build the electrical systems that make high-bandwidth brain–computer interfaces possible. This includes neural signal acquisition and stimulation to wireless power delivery, embedded processing, and system integration—all within devices small enough to be implanted in the human body and efficient enough to operate under strict thermal and power constraints. Our work sits at the intersection of analog, RF, digital, and biological systems. Many problems in this space do not present clean abstractions or clear failure modes. Success often depends on careful measurement, iteration, and engineering judgment across multiple interacting systems.

Job Description and Responsibilities:

We are looking for an experienced, hands-on electrical engineer for implant electronics board design, integration with our custom chips, testing, and quality control. You will have the opportunity to contribute to advanced projects, not only work on incremental changes, and be an integral member of a small, fast-moving team. You will be working on all phases of board design (part selection, schematic design, layout, and bring-up) as well as collaborating closely with chip designers, firmware engineers, mechanical engineers, and microfabrication experts for system integration.

• Utilize electrical engineering fundamentals and best system design practices to build on your ability to deliver high-performant, reliable, and manufacturable extremely size-constraint systems
• Gain understanding of all phases of system and board design, from system definition to part selection, schematic design, layout, bring up, and design verification
• Contribute to R&D investigations and experiments to demonstrate feasibility of new technology for the implant and the charger
• Gain experience working cross functionally to ensure successful systems integration
• Contribute to system improvements that decrease latency and increase battery life, reliability, and safety
• Develop ability to design and deploy systems for implant-charger hardware in the loop testing, and manufacturing line quality control

Required Qualifications: 

• Strong EE fundamentals
• Experience designing PCBs for low power and size constrained applications
• Experience with PCB CAD tools (Altium, Eagle, KiCad, Allegro)
• Experience with sensors, power management, and signal/power integrity
• Comfortable with common communication protocols (SPI, UART, I2C, etc.)
• Comfortable with lab equipment (oscilloscope, VNA, etc.)
• Basic C and Python programming skills

Preferred Qualifications:

• Experience with firmware development for embedded systems (C/C++)
• Experience with wireless systems (BLE, WIFI, Zigbee)
• Experience building and bringing-up MCUs or FPGA
• Proficiency with ME CAD tools (Solidworks, AutoCAD)
• Experience with analog circuit design

Expected Compensation:

The anticipated hourly rate for this position is listed below.

California Hourly Flat Rate:
$35/Hr USD

Team Description:

Join the Brain Interfaces Embedded Systems Team and be part of an elite team of engineers working on high-performance, safety-critical embedded systems for the next-generation brain-computer interfaces. You will have the opportunity to work closely with chip designers, electrical engineers, and software engineers on a small, fast-moving team.

Job Description and Responsibilities: 

We are looking for experienced, hands-on engineers who are interested in exploring what's possible in highly powered and latency-constrained environments. Firmware is the kernel of operation for the implant, and you have the chance to define and implement features that have a significant impact on the product’s capabilities. As an Embedded Software Engineer, you will be expected to:

• Own complex challenges from definition to solution
• Utilize your ability to work cross functionally to deliver safety critical systems while considering power, radio, and thermal requirements
• Take ownership of products and/or core features; from planning and design to execution and testing
• Build on your fundamental understanding of hardware while contributing to bare-metal firmware
• Embrace a fast-paced iterative environment that prioritizes shipping manufacturable solutions 

Note: The team is hiring embedded engineers at all levels, both junior and senior. What matters most is evidence of exceptional abilities and a drive to succeed.

Required Qualifications: 

• Bachelor’s degree in computer science, electrical engineering, related field, or equivalent experience 
• 1+ years of experience with embedded systems (including internships)
• Proficient in embedded C or Rust
• Ability to design bare-metal embedded systems in highly constrained environments
• Strong Electrical Engineering fundamentals 
• Signal processing fundamentals 
• You find enormous challenges exciting and enjoy discovering and defining problems as much as solving them
• You deliver. You may enjoy thoughtful conversations about problems and perfecting design, but in the end, you know that delivering reliable manufacturable solutions matters
• You are a cross-disciplinary team member. You are excited to work with and learn from chip designers to neuroscientists

Preferred Qualifications: 

• Experience with embedded stacks for ARM cores
• Experience with safety-critical systems
• Experience with FPGA development and testing
• Experience with RF, BLE, TCP/IP stacks from a practical embedded perspective
• Prior work or experience with applied cryptography and embedded systems security

Team Description:

The Surgery & Robotics Hardware Team is looking for Electrical Engineers who want to advance the future of healthcare solutions with technology. At Neuralink we recognize that increasing healthcare costs, lack of access, and insufficient numbers of neurosurgeons globally require new approaches to enable greater access to our devices. To address these challenges we design fully autonomous robotics systems, human assistive surgical tools, and design entire surgical suites in order to provide better experiences for our customers.

Our team works on our surgical robot system which aims to fully automate the implantation of the Neuralink implant. We design and integrate multi-axis robotic arms, perception systems including custom imaging hardware, optical coherence tomography tissue imaging, power electronics, and safety systems such as 3D spatial mapping/object avoidance sensors. Robotics is part of a larger system of tools we work on. For example, using pre-op MRI scans we generate patient anatomy data that we later use in surgery to register precise surgery site locations. 

In addition to research and development of modern surgical technology, we also are responsible for bringing these technologies to market. We perform full lifecycle testing for all devices we design and ultimately manufacture them for use in human surgeries. To date, our designs have served over 20 individuals, and in the coming years our designs will serve thousands of individuals who wish to use our implant technology.

Job Description and Responsibilities:

As an Electrical Engineer on the Surgery & Robot Hardware Team, you will be expected to design, verify, and oversee the transition to production of a variety of custom electronics systems.  This role offers substantial autonomy and the exciting opportunity to own creative decisions and execute on new, impactful projects such as robotics stage designs, motor drives and controls, custom camera designs, manufacturing automation, and the firmware that enables all of these devices.

Required Qualifications: 

• Bachelor’s degree in Electrical Engineering or a related field or equivalent experience
• Professional experience delivering on all phases of electronics design (requirements, part selection, schematic, layout, manufacturing, test)
• Demonstrated depth in at least one of the following:
  • Power electronics: experience designing custom power conversion, distribution, eFusing, and battery management systems in the low-to-medium (1W-2kW) range
  • FPGA hardware design for time sensitive systems such as image processing, high-speed data acquisition, or real time networking. Professional experience in FPGA selection, RTL development, digital signal processing theory and techniques, and hardware design to interface high speed physical layer devices via PCIe, MIPI, SLVS-ec, LVDS, etc
  • Manufacturing automation design: professional experience architecting and implementing manufacturing automation solutions for products that currently ship at the scale of 1000’s+
• Practical electronics design knowledge including designing for EMC, ESD, thermals and packaging

Preferred Qualifications: 

• A portfolio showcasing your hardware designs 
• Demonstrable experience developing electronics for safety critical systems such as medical devices, aerospace, automotive, or military
• Demonstrable experience shipping code in one of the following languages: C, C++, Python, or Rust
• Altium experience

WHAT YOU'LL DO

• Full cycle PCB design including collecting requirements, schematic design, component selection, supervision or completion of layout, bring-up, test, debug and integration with the system.
• Development of fuzing circuitry for missile systems.
• Closely collaborate with vehicle development teams to design, document, and produce tailored fuzing systems and effectors.
• Develop system interconnect diagrams and define wire harnesses that connect electronic equipment within the vehicle.
• Provide support and collaborate within other air vehicle subsystem development constraints.
• Vendor surveys and evaluation to support sourcing for system components.
• Conduct peer-level and cross-discipline design reviews.
• Build up and test system components through lab, ground, and flight tests.
• Low level firmware development for bring-up and test.
• Root cause analysis in support of field operations.

REQUIRED QUALIFICATIONS

• BS or higher degree in Electrical Engineering or equivalent, with 5+ years of experience designing, testing, and troubleshooting complex board designs.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Comfortable with a variety of electronic CAD tools (Altium preferred, Eagle and others acceptable)
• Experience in design for signal integrity / power integrity
• Knowledge of modern analog and digital electronics and electronic circuits.
• Test experience including data acquisition, data analysis, and project coordination.
• Eligible to obtain and maintain an active U.S. Secret security clearance
• Ability to travel as required for testing (surges up to 25%).
• Passion for defending the United States and her allies.
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Active U.S. security clearance (DoD Secret or Top-Secret or DOE L or Q).
• 5-10 years’ work experience as an individual contributing engineer, focused on electrical design, analysis, and testing of fuzing and/or ordnance systems.
• Understanding of DO-254, DO-178C, DO-160 and relevant avionics design standards for UAS.
• Familiarity with electrical component suppliers.
• Experience in UAS, missiles, or maritime programs.
• Experience with the DoD Weapons Safety Boards.
• Experience designing and scaling production of components at volume.
• Experience developing or testing complex electrical systems.
• Experience with MIL-STD-1316, MIL-STD-882E, MIL-STD-2105.
• Experience with JOTP-052 and JOTP-054.
• Experience with explosive operations and/or handling munitions.

ABOUT THE TEAM   

The Air Dominance and Strike (AD&S) Electrical Engineering Team is responsible for developing high-reliability avionics, embedded processing, and power systems for Group 5 air vehicles and missile platforms. Working across hardware, software, and mission autonomy, the team delivers flight-critical electronics, PCB assemblies, and FPGA-based processing architectures that enable Anduril's next-generation autonomous air platforms to operate in complex and contested environments. AD&S Electrical Engineers drive end-to-end development, from system architecture and circuit design to verification, integration, and flight test, ensuring scalable, mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and modern air warfare.   

ABOUT THE JOB    

We are looking for an Senior Electrical Integration Engineer to join our rapidly growing team in Costa Mesa, CA. In this role, you will work closely with avionics, systems, manufacturing, and flight test teams to support the development and test of air vehicle designs. If you are someone who thrives in a fast-paced environment supporting new developments, active deployments, and customer operated hardware, we are looking for you.   

WHAT YOU WILL DO   

• Create support documentation to include block diagrams, ICD’s wiring interconnect diagrams throughout all phases of product development.   

• Build up and test of avionics system components through lab, ground, and flight tests   

• Manage concurrent involvement in multiple projects at various stages   

• Participate in design reviews and provide input to identify issues and drive design choices   

• Conduct root cause analysis in support of vehicle integration and field operations   

REQUIRED QUALIFICATIONS   

• Bachelor’s degree in electrical engineering, Mechanical Engineering, or equivalent

• Proficient in designing electrical harnessing for rugged commercial, industrial, aerospace, or military applications   

• Familiarity with common electrical bus interfaces (CAN, Ethernet, RS422, RS232, MIL-STD-1553)   

• Must possess excellent communication skills   

• Eligible to obtain and maintain an active U.S. Secret security clearance   

PREFERRED QUALIFICATIONS   

• 4+ years experience designing and integrating electrical systems into high-speed air vehicles or missiles.

• Experienced and familiar with aircraft avionics module vendors and avionics component suppliers in UAS programs   

• Experience with Siemens Capital software for 2D modeling and drafting. 

ABOUT THE TEAM
Anduril’s Electronic Warfare (EW) team is seeking an experienced embedded software engineer to support next-generation electronic warfare platforms in production. As a Production Embedded software engineer, you’ll develop and maintain EW product software specific to a production environment, collaborate with manufacturing and test automation engineers to improve testability, and collaborate with the wider embedded software organization to ensure a seamless new product introduction.

WHAT YOU'LL DO

• Contribute to design reviews acting as an expert in Built In Test, design for test, and fault isolation and detection.
• Define Built In Test strategy and requirements for automated testing, supporting fault detection, isolation, and reporting.
• Develop and maintain production SW builds that enable testing and troubleshooting at board-level and unit-level RF test stations.
• Develop and regression test high-reliability software for controlling our electronic warfare assets, seamlessly integrated with production test automation.
• Utilize infrastructure providing deterministic builds and configuration management for production deployment, guaranteeing software traceability and minimizing the maintenance burden of manufacturing.

REQUIRED QUALIFICATIONS

• 7+ years professional experience in software engineering
• Experience (professional or in the setting of an open source community) working with typed functional programming languages (Haskell or Rust)
• Experience with Built In Test development
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Experience with software-defined digital radio systems
• Experience with MATLAB, especially C code generation.
• Experience with FPGA development (Verilog, VHDL, etc.), especially Xilinx devices and tools.
• Experience with graphics programming (OpenGL, DirectX, Vulkan, etc.)
• Experience with Nix/NixOS
• Experience with Linux boot stages
• Basic understanding of RF test equipment, such as signal generators, spectrum analyzers 

ABOUT THE TEAM

Anduril's Electromagnetic Warfare (EW) team is seeking experienced embedded software engineers to build out the software ecosystem supporting a next-generation electromagnetic warfare platform. You'll develop correct, secure, high-reliability embedded software in Rust for controlling electromagnetic warfare assets, both on Linux (NixOS) and in bare-metal/RTOS environments using async frameworks like Embassy and RTIC. You will collaborate with Electrical, RF, and Programmable Logic (PL) engineers to build high-performance hardware/software interfaces, and work with the wider software organization to integrate electromagnetic warfare products with the Anduril Lattice system-of-systems suite. The role also includes building Linux-side CLI tools in Rust for calibration, deployment, and diagnostics, and applying state-of-the-art software construction techniques to rapidly deploy cutting-edge capabilities to our customers.

WHAT YOU'LL DO

• Participate in system design, part selection, and schematic reviews for product revisions and greenfield products
• Write and maintain device drivers for microcontroller peripherals and external ICs
• Implement bootloaders and over-the-air (OTA) update mechanisms
• Build deterministic, reproducible firmware builds and configuration management for deployment, guaranteeing software traceability
• Test software using unit, software-in-the-loop (SITL), hardware-in-the-loop (HITL), and system-level methodologies
• Use software debugging tools (probe-rs, OpenOCD, GDB/LLDB) and hardware debugging tools (logic analyzers, oscilloscopes, multimeters, soldering)
• Collaborate with FPGA/PL engineers on register interfaces and hardware/software integration

REQUIRED QUALIFICATIONS

• 7+ years professional experience in embedded software and/or firmware engineering
• Strong proficiency in Rust for embedded systems, including no_std and embedded-hal ecosystem
• Comfortable working with microcontroller peripherals (SPI, I2C, UART, Ethernet, etc.) and data bus types (AXI, USB, etc.)
• Excellent technical communication and collaboration skills
• Must be able to obtain and hold a U.S. TS security clearance

PREFERRED QUALIFICATIONS

• Experience with embedded async Rust frameworks (Embassy, RTIC)
• Proficiency in C for reading and interfacing with vendor HALs and legacy codebases
• Experience with software-defined digital radio systems
• Experience with industry standards bodies or open-source communities
• Experience measuring and enhancing performance related to speed, size, power consumption, and cost
• Experience with Nix/NixOS
• Understanding of functional programming languages like Haskell

WHAT YOU’LL DO

• Lead an electrical engineering team in creating embedded compute solutions for vehicle management, DSP, and networking
• Own the full PCB development cycle of host boards for FPGAs / SoCs / SoMs (Developing requirements, schematic capture, board layout, bring-up, test, and integration)
• Develop and improve workflows throughout the FPGA / HDL design cycle (Architecture, functional block definition, simulation, system testing, HDL library standardization)
• Collaborate with internal stakeholders to develop a strategy for developing and rolling out your compute solutions across Anduril in a scalable manner
• Create, maintain and communicate product development schedules with sufficient detail to ensure that all assigned personnel are aware of their tasks and deadlines.

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 7+ years of experience designing, testing and troubleshooting complex board designs in military, automotive or similar hardware.
• Experience with leading an Electrical Engineering team focused on Digital Design
• Proficiency in an HDL language (VHDL, Verilog)
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Experience in design for signal integrity / power integrity.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Proficient with Altium Designer or equivalent electronic design automation design tool
• Eligible to obtain and maintain an active U.S. Top Secret security clearance

PREFERRED QUALIFICATIONS

• Understanding and familiarity with DO-254, DO-178C, DO-160, DO-311A
• Understanding and familiarity with MIL-STD-810, MIL-STD-704, MIL-STD-461
• Expertise in computer networking
• Experience with implementing enhanced security measures

WHAT YOU’LL DO

• Lead an electrical engineering team in creating embedded compute solutions for vehicle management, DSP, and networking
• Own the full PCB development cycle of host boards for FPGAs / SoCs / SoMs (Developing requirements, schematic capture, board layout, bring-up, test, and integration)
• Develop and improve workflows throughout the FPGA / HDL design cycle (Architecture, functional block definition, simulation, system testing, HDL library standardization)
• Collaborate with internal stakeholders to develop a strategy for developing and rolling out your compute solutions across Anduril in a scalable manner
• Create, maintain and communicate product development schedules with sufficient detail to ensure that all assigned personnel are aware of their tasks and deadlines.

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent
• 7+ years of experience designing, testing and troubleshooting complex board designs in military, automotive or similar hardware.
• Experience with leading an Electrical Engineering team focused on Digital Design
• Proficiency in an HDL language (VHDL, Verilog)
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Experience in design for signal integrity / power integrity.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Proficient with Altium Designer or equivalent electronic design automation design tool
• Eligible to obtain and maintain an active U.S. Top Secret security clearance

PREFERRED QUALIFICATIONS

• Understanding and familiarity with DO-254, DO-178C, DO-160, DO-311A
• Understanding and familiarity with MIL-STD-810, MIL-STD-704, MIL-STD-461
• Expertise in computer networking
• Experience with implementing enhanced security measures

ABOUT THE JOB

Anduril is seeking an experienced Electrical Engineer based in Costa Mesa, CA to contribute and lead subsystems development for missiles and UAVs. Looking for a self-starter with deep technical experience in defense industry developments to apply these skills in power systems, communications systems, battery technology, and avionics circuit designs. This individual will be responsible for electrical design, test and integration, from concept to production, while ensuring alignment with strategic business goals. The engineer will also be involved in managing key vendor relationships, and ensuring performance and reliability in our cutting-edge technologies.

WHAT YOU’LL DO

• Full cycle PCB design including collecting requirements, schematic design, component selection, supervision or completion of layout, bring-up, test, debug and integration with the system.
• Development of air vehicle avionics systems (flight controls, sensors, payload interfaces, power management, and networking)
• Develop system interconnect diagrams and define wire harnesses that connect electronic equipment within the vehicle.
• Provide support and collaborate within other air vehicle subsystem development constraints
• Vendor surveys and evaluation to support sourcing for avionics system components.
• Conduct peer-level and cross-discipline design reviews
• Build up and test of avionics system components through lab, ground, and flight tests
• Low level firmware development for bring-up and test
• Root cause analysis in support of field operations

REQUIRED QUALIFICATIONS

• Bachelor’s Degree in Electrical Engineering or equivalent, with 5+ years of experience designing, testing, and troubleshooting complex board designs
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Comfortable with a variety of electronic CAD tools (Altium preferred, Eagle and others acceptable)
• Experience in design for signal integrity / power integrity
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Understanding of DO-254, DO-178C, DO-160 and relevant avionics design standards for UAS
• Familiarity with aircraft avionics module vendors and avionics component suppliers from past experience in UAS programs

WHAT YOU'LL DO

• Full cycle PCB design including collecting requirements, schematic design, component selection, supervision or completion of layout, bring-up, test, debug and integration with the system.
• Development of fuzing circuitry for missile systems.
• Closely collaborate with vehicle development teams to design, document, and produce tailored fuzing systems and effectors.
• Develop system interconnect diagrams and define wire harnesses that connect electronic equipment within the vehicle.
• Provide support and collaborate within other air vehicle subsystem development constraints.
• Vendor surveys and evaluation to support sourcing for system components.
• Conduct peer-level and cross-discipline design reviews.
• Build up and test system components through lab, ground, and flight tests.
• Low level firmware development for bring-up and test.
• Root cause analysis in support of field operations.

REQUIRED QUALIFICATIONS

• BS/MS or higher degree in Electrical Engineering or equivalent, with 10+ years of experience designing, testing, and troubleshooting complex board designs.
• Competence with test equipment such as oscilloscopes, logic analyzers, thermal chambers, current-probes, and automation of tests.
• Familiarity with standard interfaces such as Ethernet, CAN, I2C, SPI, PCIe, USB, etc.
• Familiarity with common MCU, CPU, FPGA devices and technologies.
• Knowledge of modern analog and digital electronics and electronic circuits.
• Comfortable with a variety of electronic CAD tools (Altium preferred, Eagle and others acceptable)
• Experience in design for signal integrity / power integrity
• Knowledge of modern analog and digital electronics and electronic circuits.
• Test experience including data acquisition, data analysis, and project coordination.
• Ability to travel as required for testing (surges up to 25%).
• Passion for defending the United States and her allies.
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Active U.S. security clearance (DoD Secret or Top-Secret or DOE L or Q).
• 5-10 years+ work experience as an individual contributing engineer, focused on electrical design, analysis, and testing of fuzing and/or ordnance systems.
• Understanding of DO-254, DO-178C, DO-160 and relevant avionics design standards for UAS.
• Familiarity with electrical component suppliers.
• Experience in UAS, missiles, or maritime programs.
• Experience with the DoD Weapons Safety Boards.
• Experience designing and scaling production of components at volume.
• Experience developing or testing complex electrical systems.
• Experience with MIL-STD-1316, MIL-STD-882E, MIL-STD-2105.
• Experience with JOTP-052 and JOTP-054.
• Experience with explosive operations and/or handling munitions.

ABOUT THE TEAM

The Electronic Warfare (EW) team is responsible for developing high-reliability radios, embedded processing, and power systems for software defined radio platforms. Working across hardware, software, and mission autonomy, the team delivers EW-critical electronics, PCB assemblies, and FPGA-based processing architectures that enable Anduril's next-generation autonomous electronic warfare platforms to operate in complex and contested environments. EW Electrical Engineers drive end-to-end development, from system architecture and circuit design to verification, integration, and test, ensuring scalable, mission-ready solutions that meet the performance, reliability, and survivability demands of the U.S. Military and modern EW warfare.

ABOUT THE JOB

We are looking for a Senior FPGA Engineer to join our rapidly growing team in Costa Mesa, CA. In this role, you will be responsible for the end-to-end design and verification of projects on the Xilinx SOC/FPGA platforms and helping to establish robust design processes. This will require expertise in SystemVerilog, FPGA, and Xilinx. If you are someone who has supported rapid software defined radio development, then this role is for you.

WHAT YOU'LL DO

• Work with software, and electrical, engineers to bring up state of the art boards for software defined radios.
• Integrate, and test, VHDL DSP Modules into larger system.
• Design custom, and optimized, HDL for software defined radios.
• Develop drivers for custom RF component boards (PLLs, mixed signal front ends, etc)

REQUIRED QUALIFICATIONS

• Strong experience with DSP implementation for embedded devices and/or software defined radios.
• Experience leading a team of FPGA engineers in the development of new custom PCB's and custom FPGA modules
• Experience with bring-up of high speed digital interfaces (PCIE,JESD,etc).
• HDL design experience using VHDL or Verilog.
• Experience with Linux development environment and tools (e.g. Git, gcc, etc)
• Eligible to obtain and maintain an active U.S. Secret security clearance

PREFERRED QUALIFICATIONS

• Experience with embedded Linux driver development.
• Experience with Linux development environment and tools (e.g. Git, gcc, etc)
• Exposure to Wireless comms or Radar systems
• Experience with RF test equipment (Spec An, Sig Gens, Oscilloscope, etc)
• Experience with Xilinx AI Engines or NVDIA CUDA