Jobs › Companies › Qualdoc › Manual Machinist

Sobre este puesto de Manual Machinist en Qualdoc

Qualdoc · Presencial · Richmond, VA

Manual Machinist

Location: Richmond, VA
Job Type: Contract-to-Hire
Shifts: 1st and 2nd Shift
Starting Pay: $28.00/hour; higher depending on experience

Position Overview

We are seeking an experienced Manual Machinist with a strong manufacturing background to set up and operate manual milling and turning equipment. This is a hands-on machining position, not a machine operator role.

The ideal candidate can independently interpret technical drawings, select and install tooling, adjust machine settings, troubleshoot machining issues, and produce precision parts that meet required measurements and tolerances.

Key Responsibilities

  • Review work orders, blueprints, engineering drawings, material specifications, and machining instructions to determine job requirements.

  • Interpret orthographic drawings, reference planes, surface locations, and geometric dimensioning and tolerancing (GD&T).

  • Set up and adjust mills and lathes, including three-jaw and four-jaw chucks, collets, bushings, cams, gears, stops, attachments, and stock pushers.

  • Install cutting tools, indicate vises, and tram machine heads to ensure proper alignment.

  • Program mills and lathes by entering machine instructions, setting zero and reference points, tool registers, offsets, and compensation settings.

  • Apply basic math, geometry, and trigonometry when calculating machining requirements and verifying programs.

  • Load and position raw materials into machine feed systems.

  • Inspect initial runs and sample parts by checking measurements, machine positions, and dimensional accuracy against required specifications.

  • Perform machining operations such as drilling, grooving, cutting, turning, facing, knurling, and thread chasing.

  • Monitor machining processes, take measurements, and make necessary machine adjustments to maintain quality and accuracy.

  • Identify equipment or process issues, troubleshoot problems, and adjust or reprogram machine controls as needed.

  • Sharpen and replace worn cutting tools and follow established quality assurance procedures.

  • Maintain a safe work environment by following applicable safety procedures and regulations.

  • Perform preventive maintenance, troubleshoot equipment problems, and coordinate repairs when necessary.

  • Document completed work, equipment issues, and outstanding tasks to ensure smooth communication between shifts.

  • Stay current with machining techniques and equipment through technical publications and ongoing learning.

  • Take ownership of assigned work and contribute to production goals and process improvements.

  • Qualifications & Skills

  • CNC certification required.

  • CNC programming experience is a plus.

  • Strong background in manufacturing and machining.

  • Experience setting up and working with mills and lathes.

  • Ability to read and interpret blueprints, engineering drawings, and technical specifications.

  • Knowledge of machining tools, controls, instrumentation, and tooling.

  • Understanding of GD&T and dimensional measurements.

  • Ability to perform basic mathematical calculations, including geometry and trigonometry.

  • Strong attention to detail, sound judgment, and problem-solving abilities.

  • Good verbal communication and technical skills.

  • Ability to identify process improvements and work independently.

  • Work Environment & Physical Requirements

  • Primarily indoor manufacturing environment (approximately 95% indoors and 5% outdoors).

  • The facility is heated during winter but does not have air conditioning during summer.

  • Must be able to stand on concrete floors for at least eight hours per shift.

  • Work may involve kneeling, squatting, bending, and standing for extended periods.

  • Noise levels may occasionally increase near grinding and machine-testing areas. Earplugs are provided when needed.

  • Required Tools & Safety Equipment

  • Must provide basic personal hand tools, including:

  • Box, open-end, and socket wrench sets

  • Allen wrench set

  • Screwdriver set

  • Tap handles

  • Pliers

  • Combination square

  • 9-inch level

  • Tape measure

  • Both English and metric tool sets are recommended.

  • A lockable toolbox is also recommended.

  • Safety glasses and steel-toed safety shoes are required.

  • Long pants and a sleeved shirt (at least short-sleeved) must be worn.

  • ¿Listo para postularte en Qualdoc?
    Postúlate en Qualdoc

    Cómo se compara este salario de Machinist

    Este puesto paga $58,240/yr — en línea con el rango típico para los puestos de Machinist.

    $49,991 la mediana de $65,000 $87,701

    Rango típico $56,160–$76,003/yr, a partir de 472 ofertas comparables de Machinist en JobsRadar (salario anualizado en USD). Ver datos salariales de Machinist →

    Empleos similares

    Edwards Lifesciences
    Staff Technologist, Machinist (2nd Shift)
    Edwards Lifesciences
    ⚡ Postúlate pronto USA - Utah – Salt Lake City Presencial
    ● Nuevo 👁 Visto ✓ Postulado hace 17h
    Edwards Lifesciences
    Staff Technologist, Machinist (Weekend Shift)
    Edwards Lifesciences
    ⚡ Postúlate pronto USA - Utah – Salt Lake City Presencial
    ● Nuevo 👁 Visto ✓ Postulado hace 17h
    Edwards Lifesciences
    Staff Technologist, Machinist (2nd Shift)
    Edwards Lifesciences
    ⚡ Postúlate pronto USA - Utah – Salt Lake City Presencial
    ● Nuevo 👁 Visto ✓ Postulado hace 17h
    GE Aerospace
    Sterling Machinist
    GE Aerospace
    ⚡ Postúlate pronto Sterling VA USA Presencial
    ● Nuevo 👁 Visto ✓ Postulado hace 17h
    Apex Technology, Inc.
    Propulsion Machinist
    Apex Technology, Inc.
    ⚡ Postúlate pronto Los Angeles Presencial $66,560–$95,680
    ● Nuevo 👁 Visto ✓ Postulado hace 1d
    Antares
    R&D Machinist III-IV
    Antares
    ⚡ Postúlate pronto Los Angeles Presencial
    ● Nuevo 👁 Visto ✓ Postulado hace 1d
    Varda Space Industries
    Senior Prototype Machinist
    Varda Space Industries
    ⚡ Postúlate pronto El Segundo, California, United... Presencial $97,240–$97,240
    ● Nuevo 👁 Visto ✓ Postulado hace 1d
    Leidos
    CNC Machinist
    Leidos
    ⚡ Postúlate pronto Huntsville, AL Presencial $48,100–$86,950
    ● Nuevo 👁 Visto ✓ Postulado hace 2d
    SpaceX
    CNC Lathe Machinist (Starship)
    SpaceX
    ⚡ Postúlate pronto Hawthorne, CA Presencial $47,840–$56,160
    ● Nuevo 👁 Visto ✓ Postulado hace 2d

    Regístrate para recibir sugerencias adaptadas a los empleos que abres y las búsquedas que guardas.

    Más empleos en Qualdoc

    Ver todos los empleos en Qualdoc →

    Postúlate ahora
    🤖

    Un momento — para

    JobsRadar se creó para personas reales que están pasando un mal momento en su búsqueda de empleo — no para solicitudes automatizadas. Estás haciendo clic demasiado rápido y ahora estás bloqueado temporalmente.

    Vuelve más tarde. Si de verdad estás buscando empleo, cuentas con nosotros — solo compórtate como una persona.

    Catch your next role the second it’s posted.

    Create a free account and we’ll watch the boards for you — the instant a job matches your search, it lands in your inbox or Telegram. No digging, no refreshing.

    Create free account

    Free forever · takes 30 seconds · already have one?

    Toma ventaja en tu búsqueda de empleo.

    Únete a nuestro canal de Telegram para lo que te ayuda a conseguir el puesto — referencias salariales, el pulso semanal del mercado y avisos de nuevas funciones. Sin spam, solo señal.

    Únete al canal — es gratis