Jobs › Companies › Qualdoc › Manual Machinist

Sobre esta vaga de Manual Machinist na Qualdoc

Qualdoc · Presencial · Richmond, VA

Manual Machinist

Location: Richmond, VA
Job Type: Contract-to-Hire
Shifts: 1st and 2nd Shift
Starting Pay: $28.00/hour; higher depending on experience

Position Overview

We are seeking an experienced Manual Machinist with a strong manufacturing background to set up and operate manual milling and turning equipment. This is a hands-on machining position, not a machine operator role.

The ideal candidate can independently interpret technical drawings, select and install tooling, adjust machine settings, troubleshoot machining issues, and produce precision parts that meet required measurements and tolerances.

Key Responsibilities

  • Review work orders, blueprints, engineering drawings, material specifications, and machining instructions to determine job requirements.

  • Interpret orthographic drawings, reference planes, surface locations, and geometric dimensioning and tolerancing (GD&T).

  • Set up and adjust mills and lathes, including three-jaw and four-jaw chucks, collets, bushings, cams, gears, stops, attachments, and stock pushers.

  • Install cutting tools, indicate vises, and tram machine heads to ensure proper alignment.

  • Program mills and lathes by entering machine instructions, setting zero and reference points, tool registers, offsets, and compensation settings.

  • Apply basic math, geometry, and trigonometry when calculating machining requirements and verifying programs.

  • Load and position raw materials into machine feed systems.

  • Inspect initial runs and sample parts by checking measurements, machine positions, and dimensional accuracy against required specifications.

  • Perform machining operations such as drilling, grooving, cutting, turning, facing, knurling, and thread chasing.

  • Monitor machining processes, take measurements, and make necessary machine adjustments to maintain quality and accuracy.

  • Identify equipment or process issues, troubleshoot problems, and adjust or reprogram machine controls as needed.

  • Sharpen and replace worn cutting tools and follow established quality assurance procedures.

  • Maintain a safe work environment by following applicable safety procedures and regulations.

  • Perform preventive maintenance, troubleshoot equipment problems, and coordinate repairs when necessary.

  • Document completed work, equipment issues, and outstanding tasks to ensure smooth communication between shifts.

  • Stay current with machining techniques and equipment through technical publications and ongoing learning.

  • Take ownership of assigned work and contribute to production goals and process improvements.

  • Qualifications & Skills

  • CNC certification required.

  • CNC programming experience is a plus.

  • Strong background in manufacturing and machining.

  • Experience setting up and working with mills and lathes.

  • Ability to read and interpret blueprints, engineering drawings, and technical specifications.

  • Knowledge of machining tools, controls, instrumentation, and tooling.

  • Understanding of GD&T and dimensional measurements.

  • Ability to perform basic mathematical calculations, including geometry and trigonometry.

  • Strong attention to detail, sound judgment, and problem-solving abilities.

  • Good verbal communication and technical skills.

  • Ability to identify process improvements and work independently.

  • Work Environment & Physical Requirements

  • Primarily indoor manufacturing environment (approximately 95% indoors and 5% outdoors).

  • The facility is heated during winter but does not have air conditioning during summer.

  • Must be able to stand on concrete floors for at least eight hours per shift.

  • Work may involve kneeling, squatting, bending, and standing for extended periods.

  • Noise levels may occasionally increase near grinding and machine-testing areas. Earplugs are provided when needed.

  • Required Tools & Safety Equipment

  • Must provide basic personal hand tools, including:

  • Box, open-end, and socket wrench sets

  • Allen wrench set

  • Screwdriver set

  • Tap handles

  • Pliers

  • Combination square

  • 9-inch level

  • Tape measure

  • Both English and metric tool sets are recommended.

  • A lockable toolbox is also recommended.

  • Safety glasses and steel-toed safety shoes are required.

  • Long pants and a sleeved shirt (at least short-sleeved) must be worn.

  • Pronto para se candidatar à Qualdoc?
    Candidatar-se à Qualdoc

    Como este salário de Machinist se compara

    Esta vaga paga $58,240/yr — em linha com da faixa típica para vagas de Machinist.

    $49,991 a mediana $65,000 $87,701

    Faixa típica $56,160–$76,003/yr, com base em 472 vagas de Machinist comparáveis na JobsRadar (pagamento anualizado em USD). Ver insights salariais de Machinist →

    Vagas semelhantes

    Edwards Lifesciences
    Staff Technologist, Machinist (2nd Shift)
    Edwards Lifesciences
    ⚡ Candidate-se cedo USA - Utah – Salt Lake City Presencial
    ● Nova 👁 Vista ✓ Candidatada há 17h
    Edwards Lifesciences
    Staff Technologist, Machinist (Weekend Shift)
    Edwards Lifesciences
    ⚡ Candidate-se cedo USA - Utah – Salt Lake City Presencial
    ● Nova 👁 Vista ✓ Candidatada há 17h
    Edwards Lifesciences
    Staff Technologist, Machinist (2nd Shift)
    Edwards Lifesciences
    ⚡ Candidate-se cedo USA - Utah – Salt Lake City Presencial
    ● Nova 👁 Vista ✓ Candidatada há 17h
    GE Aerospace
    Sterling Machinist
    GE Aerospace
    ⚡ Candidate-se cedo Sterling VA USA Presencial
    ● Nova 👁 Vista ✓ Candidatada há 17h
    Apex Technology, Inc.
    Propulsion Machinist
    Apex Technology, Inc.
    ⚡ Candidate-se cedo Los Angeles Presencial $66,560–$95,680
    ● Nova 👁 Vista ✓ Candidatada há 1d
    Antares
    R&D Machinist III-IV
    Antares
    ⚡ Candidate-se cedo Los Angeles Presencial
    ● Nova 👁 Vista ✓ Candidatada há 1d
    Varda Space Industries
    Senior Prototype Machinist
    Varda Space Industries
    ⚡ Candidate-se cedo El Segundo, California, United... Presencial $97,240–$97,240
    ● Nova 👁 Vista ✓ Candidatada há 1d
    Leidos
    CNC Machinist
    Leidos
    ⚡ Candidate-se cedo Huntsville, AL Presencial $48,100–$86,950
    ● Nova 👁 Vista ✓ Candidatada há 2d
    SpaceX
    CNC Lathe Machinist (Starship)
    SpaceX
    ⚡ Candidate-se cedo Hawthorne, CA Presencial $47,840–$56,160
    ● Nova 👁 Vista ✓ Candidatada há 2d

    Cadastre-se para receber sugestões sob medida com base nas vagas que você abre e nas buscas que você salva.

    Mais vagas na Qualdoc

    Ver todas as vagas na Qualdoc →

    Candidatar-se agora
    🤖

    Opa — calma aí

    A JobsRadar foi feita para pessoas de verdade passando por um momento difícil na busca por emprego — não para requisições automatizadas. Você está clicando rápido demais e agora está temporariamente bloqueado.

    Volte mais tarde. Se você está mesmo procurando emprego, estamos com você — apenas aja como um ser humano.

    Catch your next role the second it’s posted.

    Create a free account and we’ll watch the boards for you — the instant a job matches your search, it lands in your inbox or Telegram. No digging, no refreshing.

    Create free account

    Free forever · takes 30 seconds · already have one?

    Ganhe vantagem na sua busca por emprego.

    Entre no nosso canal do Telegram para o que ajuda você a conseguir a vaga — referências salariais, o pulso semanal do mercado e avisos de novos recursos. Sem spam, só sinal.

    Entre no canal — é grátis