What The Role Is

Reporting to the Plant Manager, the Solar Technician is responsible for troubleshooting, maintaining, servicing, and repairing solar PV systems and associated equipment. The primary objective is to maintain safe, effective, efficient, and profitable solar PV operation. 

Pay Ranges by Job Level:

Solar Technician I ($54,000 - $77,000)

Solar Technician II ($62,000 - $88,000)

Solar Technician III ($88,000 - $107,000)

What You'll Be Doing

Level I

• Assists higher level Technicians in performing maintenance. 
• Performs other technical and administrative duties associated with operating and maintaining a power facility. 
• Ensures work is performed in accordance with Environmental and Safety requirements. 
• Participate in required training, including On-the-Job Training, Self-Study, Computer Based Training and Classroom Training. 
• Performs other duties as assigned within the level I scope

Level II (Additions)

• Performs corrective, preventive, and emergency maintenance and operations for which they are qualified to safely and efficiently perform
• Performs work independently and/or in work crews
• Travel required as needed
• Performs other duties as assigned within the level II scope

Level III (Additions)

• Executes routine electrical troubleshooting and repair, instrumentation calibration and troubleshooting
• Performs complex maintenance work such as distributed control systems and inverter troubleshooting as assigned by supervisor based on level of skill and ability
• Complete work orders for the preventive maintenance management system
• Performs corrective, preventive, and emergency maintenance on all PV Solar equipment
• Prepares and implements switching and clearance orders, while working with Operations Center
• Operates all electrical and mechanical PV Solar power plant systems
• Participates in training as required, JHA, PJB, LOTO documentation
• Writes Plant Orders, Plant Procedures, Operating Instructions and other documents as assigned by supervisor
• Ensures work is performed in accordance with Environmental and Safety requirements
• Performs other duties as assigned within the level III scope

What You'll Bring

Level I

• A high school diploma or GED is required or willing to obtain GED within first 6 months of employment.
• Possess demonstrable mechanical aptitude and basic electrical knowledge.
• Understanding of general workplace safety and the ability to follow safety standards, as well as help the company improve upon the standards in place.
• Will drive company vehicle; must have a valid state driver’s license and good driving record.
• Ability to work overtime and non-standard working hours (nights, holidays, weekends), when needed.
• Professionalism and excellent communication skills.
• Ability to operate a computer with technical proficiency of standard business software.
• Knowledge of applicable safety and environmental regulations.
• Able to work both independently and as part of a multi-tasking team.

Level II (Additions)

• 1+ years of experience in a power plant or PV Solar O&M/EPC experience
• 2+ years of field experience with significant I&E, I&C and/or C&I Electrician experience will be considered in lieu of applicable solar experience
• Demonstrated knowledge of electrical or mechanical fundamentals (single craft journeyman skills) such as electrical measurements, control circuits, and solid state theory application
• Basic knowledge of operational characteristics of equipment and associated control devices installed in power facilities
• Possess demonstrable mechanical aptitude and basic electrical knowledge

Level III (Additions)

• 4+ years of PV solar experience is required. I&E, I&C and/or C&I Electrician experience will be considered in lieu of applicable experience.
• Proven experience with a multitude of electrical/construction projects
• Demonstrated knowledge of electrical or mechanical fundamentals (Journeyman skills) such as electrical measurements, control circuits, and solid state theory application
• Knowledge of complex analog and digital instrumentation and control systems
• Proper methods for troubleshooting, repairing, and adjusting instruments and control systems
• Experience administering safe methods to clear equipment, use of tools and plant safety rules
• Understanding reporting procedures and practices and maintenance procedures and practices
• Knowledge of electrical and mechanical prints
• Familiarity with PV Solar plant terminology and nomenclature
• Qualified to perform routine and emergency operations at a solar generation facility and Switchyard
• Able to communicate verbally and in writing and able to work without direct supervision during performance of work
• Able to travel (approximately 5%)

• If you don’t meet 100% of the above qualifications but see yourself contributing, please submit your resume.

What Would Be Nice

• 2-year technical degree or equivalent Journeyman certification/qualifications is preferred

Clearway will not sponsor nonimmigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Onsite

Veo is excited to be launching our services in Spring of 2026 to the Salt Lake City Community. Interested in joining us for launch? Please apply to this role to hear more closer to our launch date!

Are you the person your friends call when something needs to be fixed or repaired? Do you enjoy being hands-on and solving mechanical issues? Are you interested in working in the growing EV shared micromobility industry? If so, you might be the perfect fit for Veo’s Repair Technician!

At Veo, we're bringing the next generation of mobility sharing to cities and universities globally through electric bikes and scooters. We design and engineer our own vehicles, hardware, and software systems to provide a greener, healthier mode of transportation, making the communities we serve more sustainable and livable. We're looking for exceptionally talented individuals who are ready to take on exciting challenges and own creative solutions.

Job Summary:

Veo is seeking repair technicians to maintain and repair our electric vehicle fleet. This role is ideal for mechanically-inclined professionals who enjoy solving problems, are comfortable working with their hands, and are passionate in helping make our communities safe and sustainable. No electric vehicle experience required but experience (professional or hobby) repairing bikes, scooters, cars, or motorcycles are a great fit.

Responsibilities:

• Perform comprehensive repairs on Veo’s electric bikes/scooters from tightening a bolt to replacing a motor 
• Conduct quality checks and routine inspection to ensure all vehicles meet our safety standards
• Follow processes to log and track maintenance record
• Track inventory levels for spare parts on an ongoing basis
• Maintain excellent warehouse organization and set example for teammates
• Perform field tasks as needed such as: swapping batteries and redistribution
• Other duties as assigned

Qualifications & Skills:

• At least 1+ years of experience in maintenance/ auto repair
• Ability to lift, carry, push and pull electric bikes/scooters weighing up to 80 lbs
• Problem-solving mindset and self-motivated
• Comfortable with navigating and using smartphone apps
• Strong communication and interpersonal skills; must be a team player!

Nice to have:

• Previous maintenance experience in bikes, scooters, motorcycles, or automotives
• Basic knowledge in electronics

Perks:

• Full-time employees are eligible for: Medical / Dental / Vision coverage, PTO
• Opportunity to help make the community safe and sustainable
• Free Veo credits!
• Flexible work hours

#VEO2026

FIELD SERVICE TECHNICIAN – Level 1, 2 or 3

Purpose of Position:

IEM will provide training on our specific equipment and commissioning process in Ashburn, VA for approximately 4 weeks. You will be responsible for hands-on field service work at customer sites, with a focus on installation of components and subassemblies, and basic commissioning of IEM equipment primarily in data center or industrial applications. This includes, but may not be limited to:

• Attending project meetings as required, including coordination with contractors and clients.
• Installation and modification of electrical or mechanical components and subassemblies which may include: Panelboard interiors, Circuit breakers, Bus bar, Switchgear section doors and subpanels, addition of control components, Power Cabling and control wiring;
• Perform basic testing of modified assemblies (visual, ductor, etc.).
• Perform basic commissioning of switchboards, controls panels, and power products.
• Troubleshooting of electrical circuits and networking equipment.
• Coordinating with Technical Project Manager or manufacturing facilities to find solutions to product or commissioning issues identified by IEM or reported by the customer in the field, and identifying additional field resources needed for installation and replacement parts.
• Performing preventive maintenance, field installations and modifications to existing equipment
• Technical product support

Education and Experience:

• A technical degree or equivalent and 8 yrs+ of experience working in a manufacturing environment, data center or field service role with COMMISSIONING OF LV/MV ELECTRICAL SWITCHGEAR (required for Level 3 candidates).
• Must be a team player and have strong communication skills
• Ability to work independently without direct supervision is a must
• Ability to travel (75%). Must be willing to work evenings and weekends when needed.

• Experience with switchgear and electrical controls system. (required for Level 3)
• Military experience (Plus)
• Ability to read and interpret electrical wiring diagrams (required for level 3)

Compensation

The hourly range for this role is $36.30 -$52.80 per hour, based on location, experience, and qualifications.

Guild Garage Group LLC is an Equal Opportunity Employer AA/EOE/M/F/V/D. In compliance with the Americans with Disabilities Act, A Plus may provide reasonable accommodations to qualified individuals with disabilities and encourages both prospective and current employees to discuss potential accommodations with the employer.

All candidates are required to undergo pre-employment Background and Drug Screenings, as well as a Motor Vehicle Record Check.

#GuildSP

*This posting provides details on potential commissioned compensation ranges and possibilities. These amounts are not guaranteed and should in no way be construed as a salary offer.

#GuildSP

Cottonwood Residential is looking to hire an experienced Apartment Maintenance Technician at Fox Point in Old Farm Apartments in Millcreek, UT. Apply today!

Compensation & Benefits of a Maintenance Technician

• Competitive pay!
• Full health, vision, dental, life, and disability benefits - available within 1-30 days!
• Generous 401k and HSA Company match!
• Paid time off – eligible for 3 weeks (120 hours) in 1^st year!
• 10.5 paid holidays!

Qualifications & Required Experience of an Apartment Maintenance Technician

• Ability to read, write, and speak English to communicate with customers, process Company paperwork, and interpret safety and operating manuals and procedures.
• Must be able to move, carry, reposition, or lift items weighing up to 50 lbs.
• Ability to walk and stand for long periods of time.
• Ability to climb stairs, ladders, scaffolds, and ability to navigate elevation changes while maintaining balance.
• Frequent need to sit, stoop, kneel, crouch, crawl, bend, push/pull, and ability to navigate difficult terrain and access small areas.
• Ability to work standard community hours, including evenings and weekends. 
• Ability to work as an on-call technician and provide after-hours emergency service with the support of the Service Manager while following Company standards. 
• Perform repairs that may include, but are not limited to, plumbing, electrical work, and general carpentry work related to household, building, and property grounds repairs. 
• EPA certification Type II or Universal is required.
• CPO certification is a plus.
• Considerable experience troubleshooting HVAC.
• Valid Driver's License is required.

Cottonwood Residential is hiring! We are looking to add an experienced Apartment Maintenance Technician to our team in Salt Lake City. This position will be based at Richmond Apartments in Millcreek, UT. Apply today!

Compensation & Benefits of a Maintenance Technician

• Competitive pay!
• Full health, vision, dental, life, and disability benefits - available within 1-30 days!
• Generous 401k and HSA Company match!
• Paid time off – eligible for 3 weeks (120 hours) in 1^st year!
• 10.5 paid holidays!

Qualifications & Required Experience of a Property Maintenance Technician

• Ability to read, write, and speak English to communicate with customers, process Company paperwork, and interpret safety and operating manuals and procedures.
• Must be able to move, carry, reposition, or lift items weighing up to 50 lbs.
• Ability to walk and stand for long periods of time.
• Ability to climb stairs, ladders, scaffolds, and ability to navigate elevation changes while maintaining balance.
• Frequent need to sit, stoop, kneel, crouch, crawl, bend, push/pull, and ability to navigate difficult terrain and access small areas.
• Ability to work standard community hours, including evenings and weekends. 
• Ability to work as an on-call technician and provide after-hours emergency service with the support of the Service Manager while following Company standards. 
• Perform repairs that may include, but are not limited to, plumbing, electrical work, and general carpentry work related to household, building, and property grounds repairs. 
• EPA certification Type II or Universal is required.
• CPO certification is a plus.
• Considerable experience troubleshooting HVAC.
• Valid Driver's License is required.

1 position available per shift

1st shift @ 6AM - 2:30PM

2nd shift @ 2PM-10:30PM

3rd Shift @ 10PM - 6:30AM

The Facility Technician primary responsibility will be maintaining, repairing, operating facilities infrastructure including HVC, Ammonia System, Water Heaters. Compressors, Wastewater System, and soft water systems and electrical generators in support of manufacturing operations. You will need to troubleshoot, repair, replace defective parts and restore operations with minimum downtime. 

You will also support and maintain manufacturing, production and utility equipment to meet product quality and production schedule requirements. This position is key to ongoing preventive maintenance and management of all infrastructure systems and building equipment including steam boilers, mechanical, electrical and plumbing systems. Position participates in rotating "On Call" duties for after-hours facilities emergencies and refrigeration operating temperature alarms to ensure product quality.

The facility technician is also a position with leadership responsibilities. Their judgment helps maintain the daily activities and guides others in the department. They assist management with specific tasks including plant security and key control. Their experience allows them to handle assignments with little supervision and assist others to perform their assignments as well.

Required Duties and Responsibilities:

Ammonia Refrigeration

• Perform daily rounds on compressors, condensers, evaporators, and related systems
• Troubleshoot and repair industrial ammonia refrigeration systems
• Support PSM/RMP compliance (OSHA/EPA)
• Respond to ammonia alarms and assist with leak response protocols

Wastewater Treatment

• Operate and maintain wastewater treatment systems
• Conduct water chemistry testing and manage chemical dosing
• Troubleshoot system issues and ensure environmental compliance

HVAC & Utilities

• Maintain and repair HVAC systems (ventilation, A/C, make-up air units)
• Operate hot water systems, and compressed air systems
• Ensure all utility systems operate within safe and efficient parameters

Facility Maintenance

• Perform general facility repairs (mechanical, structural, minor electrical)
• Maintain dock plates, fast track doors, dock equipment, and building systems
• Execute preventive maintenance to minimize downtime

Low Voltage & Controls

• Install and troubleshoot sensors, wiring, and control panels
• Work with three-phase electrical systems and control voltages (480VAC–24VDC)
• Assist with PLC-controlled systems and basic controls troubleshooting

CO₂ & Nitrogen Systems

• Operate and maintain CO₂ and nitrogen supply systems
• Troubleshoot regulators, piping, and gas-related equipment
• Ensure compliance with compressed gas safety standards

What We’re Looking For

Required Qualifications

• 2+ years of experience in industrial maintenance, utilities, or facilities
• Experience working with industrial electrical systems (480VAC–24VDC)
• Ability to read electrical schematics and technical manuals
• Experience using a CMMS (SAP, RedZone, or similar)
• Ability to work in extreme environments (cold storage, boiler rooms)

Preferred Qualifications

• Experience in food manufacturing or regulated environments
• Ammonia refrigeration experience (RETA CARO/CIRO preferred)
• EPA 608 Universal Certification
• Experience with CO₂ and nitrogen systems
• Background in wastewater treatment operations
• Experience with low voltage installation and controls troubleshooting

Work Environment

• Exposure to hot, cold, and wet environments
• Work at heights and in confined spaces as needed
• On-call or off-shift support may be required

ABOUT THIS ROLE

LVT is seeking a strategic, systems-thinking Senior Product Manager to own LVT's flagship product: the Mobile Security Unit (MSU). The MSU is the industry-defining platform that put LVT on the map — a ruggedized, AI-powered mobile surveillance system deployed across thousands of customer sites nationwide. As Senior PM of the MSU, you are the product visionary and operator for this business-critical platform. You will drive both its ongoing evolution through a forward-looking enhancement roadmap and its long-term health through disciplined fleet lifecycle management.

You will sit at the intersection of Hardware Engineering, Software, Service Operations, and Data Analytics — translating field intelligence, customer needs, and technical capability into a product roadmap that keeps the MSU the undisputed leader in mobile security.

RESPONSIBILITIES

Product Strategy & Roadmap

• Own the MSU product roadmap end-to-end, balancing new capability development, hardware enhancements, and fleet sustainment in a cohesive multi-year plan aligned to LVT's software and AI strategy.
• Identify and prioritize enhancement opportunities — new sensors, AI/ML integrations, connectivity upgrades, power innovations — that extend MSU's competitive differentiation and open new market segments.
• Define and communicate the MSU product vision to internal stakeholders, customers, and partners.
• Partner with Sales, Marketing, and Business Development to drive continued MSU market growth — identifying expansion opportunities, informing pricing and packaging strategy, and ensuring the product roadmap directly supports LVT's revenue and market share goals.

Product Enhancement & Innovation

• Lead discovery and definition for MSU hardware and systems enhancements, working closely with Hardware Engineering, Software, and AI teams to bring new capabilities to market.
• Develop business cases for capability investments, including market sizing, competitive analysis, and ROI modeling.
• Partner with Sales and Marketing to equip the go-to-market team with compelling MSU positioning as enhancements ship.

Fleet Sustainment & Lifecycle Management

• Manage the full lifecycle of the deployed MSU fleet, ensuring thousands of units in the field remain high-performing and reliable — from active platform optimization through end-of-life transitions.
• Proactively manage component lifecycles (modems, sensors, power systems), leading make/buy validation for drop-in replacements to ensure zero supply chain or field downtime.
• Lead development of modular hardware refresh kits that enable older MSU units to support modern AI/ML capabilities through cost-effective field upgrades rather than full replacements.
• Use fleet telemetry and health dashboards to drive predictive maintenance cycles and engineering changes that measurably improve uptime and MTBF.

Stakeholder Partnership & Unit Economics

• Act as the primary product interface for Hardware Engineering, Service Operations, and Field Teams — ensuring the MSU is designed for both performance and serviceability, with field technician feedback informing every development cycle.
• Build and defend business cases for fleet investments, balancing enhancement capital against retrofit and TCO reduction initiatives.
• Drive unit economics improvements through durability gains, power consumption reductions, and lower field service costs; travel up to 15% for customer visits, field operations, and supplier engagements.

REQUIRED EXPERIENCE

• 5+ years of Product Management experience, with a track record of owning a complex hardware or hardware/software product — including both roadmap development and in-field lifecycle management.
• Hardware/Software Systems Fluency: Experience managing products involving a deep integration between embedded electronics (cameras, sensors, modems) and AI/ML services.
• Product Roadmapping & Discovery: Demonstrated ability to build and prioritize a multi-horizon product roadmap, balancing new capability investment with platform sustainment.
• Operational & Financial Acumen: Ability to build business cases for enhancement investments, retrofit programs, and capital expenditure decisions with clear ROI framing.
• Technical Depth: Familiarity with embedded electronic products, power management (solar/battery), and communication interfaces (LTE/5G, Ethernet, PoE).
• Data & Analytics Proficiency: Experience using BI tools (Tableau, Looker, or Power BI) to analyze fleet telemetry and inform product decisions.
• Vendor & Supply Chain Management: Proven ability to manage hardware vendors, conduct make/buy analyses, and navigate component end-of-life cycles.
• Leadership & Influence: Demonstrated ability to align and lead cross-functional teams across Engineering, Field Service, Sales, and Finance without direct authority.
• Education: Bachelor's degree in Mechanical Engineering, Electrical Engineering, Computer Science, Operations Management, or a related technical field. An MBA or advanced technical degree is a plus.

6p - 6:30am, 2-2-3 schedule

SUMMARY 

 The primary role of the Maintenance Mechanic is to provide competent & effective Electrical and Mechanical Maintenance support to the Plant and Facility operations in a safe manner. The Maintenance Mechanic will be responsible for maintaining, adjusting and repairing of plant machinery to meet industry standards while ensuring compliance with all regulatory agencies, including but not limited to USDA, OSHA, FDA, EPA and Local Government. The position will require a flexible schedule focusing on preventive maintenance and timely repairs.

ESSENTIAL DUTIES AND RESPONSIBILITIES

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 

• Installed, and/or troubleshoot and repair Manufacturing equipment such as: assembly, conveyors, forming, mixing (Oven operations is a plus).
• Follows work instructions and OSHA safety rules, including the use of all PPE and other safety equipment in an industrial environment.
• Diagnose problems, replace and repair parts, detect and replace defective items, test and make final adjustments for high-speed production equipment.
• Diagnose and repair all electrical functions.
• Must be able to prioritize and triage in a fast-paced work environment.
• Must be able to maintain equipment in accordance with diagrams and manufactures specifications while following preventative maintenance work orders and scheduled PM’S.
• Generate work orders, and parts request.
• Be able to use some machine shop, and other related machines as required to repair parts or fabricate modifications.
• Complete work orders and PMs and the documentation for that work
• Ability to use mechanical and pneumatic processes: including cylinders and glue machines, date coders.
• Operate equipment such as forklifts, scissors lifts, and other appropriate equipment
• Maintain current GMP, Safety, Food Safety, & technical knowledge by actively participating in training.

QUALIFICATIONS:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.  The following list that follows is representative of the knowledge, skill and/or ability required:

• 2+ years of experience working in the food manufacturing industry.
• 4 years of experience working as an experienced level maintenance mechanic.
• PLC experience is a plus
• Able to work rotation 12-hour shift including weekends and some overtime and occasionally.
• Ability to follow manufacturing specifications and schematics.
• Knowledge of food grade aluminum and stainless-steel welding techniques.
• Complete knowledge of fabrication techniques.
• Electrical knowledge and packing machinery experience a plus.
• Possess a full complement of the necessary hand and power tools to support an industrial manufacturing plant.
• Ability to multitask, prioritize items and be self-motivated.
• Complete knowledge of all tools required for industrial maintenance, including those used to broach, mill, and lathe.
• Must be able to communicate and understand safety issues, including reading the information on safety equipment and relaying relevant information to coworkers.
• Have a basic knowledge of control power and main power.
• Be able to identify and understand all different lubricants and their use for a chain lube to a high-performance synthetic lube.
• Knowledge of welding techniques (MIG, TIG, Acetylene).
• Understand pneumatic and water systems.
• Must be able to use soldering techniques
• Must be able to read electrical schematics.
• Must be able to identify appropriate motor frame, power load, and amp draw.
• Must have their own set of professional electrical tools, including voltmeter and amp meter.

EDUCATION and/or EXPERIENCE

A high school diploma or its equivalent is required. Complete working knowledge of the manufacturing process, typically resulting from a minimum of five years’ experience in related jobs.

LANGUAGE SKILLS

Ability to read and interpret quality documents, safety rules, operating and maintenance instructions, and procedure manuals.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit. The employee is occasionally required to stand; walk; use hands, handle, or feel; and reach with hands and arms.  The employee must occasionally lift and/or move up to 50-75 pounds.  Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

WORK ENVIRONMENT

While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, and energized equipment.  The noise level in the work environment varies depending on tasks.

OTHER DUTIES

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

POSITION TYPE/EXPECTED HOURS OF WORK

This is a Full Time Non-Exempt position 40 hour per week, and it may require working additional hours depending on business need requirements.

The Good Stuff – Benefits!!
Our team members' physical and mental health is important to a thriving workplace. That’s why we offer the following benefits to full-time employees:

• Medical, dental, and vision insurance offered for eligible employees
• 401(k) plan with a company match that vest on day 1 of eligibility
• Paid vacation (40 hours)
• Paid time off (40 hours)
• Holiday pay (11 days)
• Paid short-term disability
• Paid life insurance
• Banfield Pet Insurance Discounts
• Wellness Benefits and Discounts
• Employee Assistance Program 

This position would also be of interest to people have worked as the following:

Maintenance Mechanic, Industrial Maintenance Technician, Plant Maintenance Technician, Facilities Maintenance Mechanic, Maintenance Technician, Mechanical Maintenance Technician, Electrical Maintenance Mechanic, Maintenance Engineer, Production Maintenance Technician

ABOUT THIS ROLE

We are seeking a proactive, hands-on Safety and Facilities Manager to lead our industrial manufacturing site into its next phase of operational excellence. Our goal is to move beyond baseline OSHA compliance and transform our safety program into a robust, proactive culture.

In this role, you aren’t just a "safety cop"—you are a builder who will own the safety and structural integrity of our home base. You will oversee the physical health of our plant, manage a dedicated Facilities Technician, and coordinate specialized external contractors to ensure our infrastructure supports high-efficiency production.

ROLE RESPONSIBILITIES 

Safety and Environmental Leadership

• Program Development: Build, implement, and maintain a comprehensive Safety Management System (SMS) that exceeds OSHA standards.
• Culture Building: Lead the "Safety First" initiative, shifting the mindset from reactive compliance to proactive risk engagement across all shifts.
• Training and Enablement: Design and deliver safety training modules (LOTO, Fall Protection, Forklift, HazCom, etc.) and empower floor leads to act as safety champions.
• Incident Management: Lead all accident investigations using Root Cause Analysis (RCA) and ensure corrective actions prevent recurrence.
• Compliance and Auditing: Conduct regular site audits and manage all EHS documentation, including OSHA 300 logs and environmental reporting.
• Environmental Oversight: Manage air and noise pollution control programs to meet all local and federal environmental permits.

Facilities and Maintenance Management

• Personnel Management: Directly supervise and mentor the Facilities Technician, prioritizing their daily workload and professional development.
• Maintenance Strategy: Oversee the Preventive Maintenance (PM) schedule for the building’s envelope, HVAC, plumbing, and electrical systems.
• Contractor Liaison: Source, vet, and manage third-party vendors for specialized maintenance, safety supplies (PPE/First Aid), and waste management.
• Capital Projects: Assist in the planning and execution of facility upgrades, equipment installations, and space optimizations.
• Budgeting: Manage the facilities budget, ensuring cost-effective procurement without compromising safety or quality.

OUR IDEAL CANDIDATE 

• Experience: You have 5+ years in a Safety or Facilities role within an industrial manufacturing environment.
• Education: You hold a Bachelor’s degree in Occupational Health and Safety, Engineering, or a related field (preferred).
• Certifications: You possess an OSHA 30-Hour certification (required); CSP or ASP certifications are highly preferred.
• Technical Expertise: You have deep knowledge of OSHA 1910 standards and air/noise regulations.
• Leadership: You have a proven track record of managing direct reports and third-party contractors.
• The ‘Safety Mindset’: You excel at finding solutions that respect production deadlines while keeping people safe.
• Project Management: You can effectively juggle facility repairs, safety audits, and contractor negotiations simultaneously.
• Communication: You are comfortable speaking to everyone from the executive board to the shop floor team to drive buy-in.