FT Float Nurse Practitioner (NP) | Houston Market
Location(s): Spring + Cypress + The Woodlands + Atascocita
Full-Time | Monday - Friday + rotating Saturdays, per clinic needs | 8:00 AM - 5:00 PM

Are you a skilled and compassionate Nurse Practitioner looking for an opportunity to make a meaningful impact in patient-centered infusion care? IVX Health is seeking an NP to provide high-quality, specialized infusion therapy in an outpatient setting. As a Nurse Practitioner at IVX Health, you’ll be at the forefront of delivering personalized, compassionate care to our patients. With your expertise in infusion therapy, you’ll oversee patient care, collaborate with a multi-disciplinary team, and serve as a trusted resource for patients, families, and providers. You’ll ensure every treatment is delivered with precision and care, making a real difference in patients’ lives.

Why Join IVX Health

• Make a Meaningful Impact – Deliver high-quality care that directly improves patients' lives and supports their families.
• Collaborative & Supportive Team – Work alongside a dedicated, multidisciplinary team in a positive and patient-focused environment.
• Grow Your Career – Access Continuing Education Units (CEUs), tuition reimbursement, and professional development opportunities. We cover the cost of CRNI (Certified Registered Nurse Infusion) and ONCC (Oncology Nursing Certification Corporation) certifications to support your career advancement.
• Advanced Clinical Training – Receive ultrasound IV skills training to enhance your expertise in infusion therapy.
• Prioritize Work-Life Balance – Enjoy flexible scheduling, ample PTO, and the ability to truly disconnect and recharge during holidays.
• Innovative Outpatient Care – Be part of a cutting-edge healthcare model that prioritizes patient comfort, seamless care coordination, and specialized infusion therapies.

What You Will Do

• Provide Direct Patient Care – Deliver on-site and virtual supervision while administering infusions and injections with precision.
• Conduct Patient Assessments – Perform evaluations, document SOAP notes, and monitor treatment responses.
• Educate and Support Patients – Guide patients and families through treatment expectations, potential side effects, and disease management.
• Ensure Compliance and Quality – Maintain accurate records in the Electronic Health Record (EHR) system, review nursing documentation, and uphold HIPAA and OSHA standards.
• Optimize Clinical Workflows – Assist with chart preparation and treatment planning to streamline patient visits.
• Collaborate with Healthcare Teams – Work closely with referring providers and cross-functional teams to enhance care coordination.
• Support Operations and Training – Assist in inventory management, prior authorizations, and regulatory adherence.
• Flexibility and Adaptability – Work at multiple facilities within a designated market as needed.
• Perform Additional Duties – Take on other responsibilities as assigned to support patient care and organizational objectives.

What We're Looking For

• Active and Unrestricted Licenses – Nurse Practitioner (NP) license and Registered Nurse (RN) license (if required by the state).
• Board Certification – AANP or ANCC certification required.
• Life Support Certifications – BLS certification required; PALS certification preferred.
• Clinical Experience – Background in an ambulatory infusion center, outpatient specialty clinic, or similar setting is a plus.
• Ability to Treat a Diverse Patient Population – Must be able to care for both adults and pediatrics—Family Nurse Practitioner (FNP) preferred.
• Strong IV and Infusion Therapy Skills – Experience with specialty biologics, medication management, and emergency response protocols.
• Proficiency in Clinical Documentation – Experience with EHR systems and a strong understanding of HIPAA and regulatory compliance.
• Exceptional Communication & Collaboration – Ability to work effectively with patients, families, and multidisciplinary teams.

Discover the advantages of Advanced Independent Practice - Texas Digestive Disease Consultants (TDDC) - San Marcos - powered by GI Alliance.

As a member of GI Alliance (GIA), Texas Digestive Disease Consultants (TDDC) - San Marcos is supported by the nation’s leading patient-focused, excellence-driven gastroenterology network that is physician-led. This partnership empowers TDDC to deliver superior, individualized patient care by leveraging GI Alliance’s robust, world-class business and organizational support, ensuring our physicians can focus on what they do best – providing top-notch care in a successful and dynamic private practice setting. 

Practice Opportunities:

• Employed Position for the first 2 years, with Partnership Track
• Local Autonomy with National Resources
• Generous Financial Package
• Relocation Allowance, Signing Bonus & Annual CME
• Great Work/Life Balance

Lifestyle: 

• San Marcos is conveniently located between two major cities, Austin and San Antonio, providing easy access to their amenities and job opportunities while offering a more relaxed and affordable lifestyle.
• Home to Texas State University, which offers opportunities for physicians to engage in research collaborations, teach medical students, or participate in continuing education programs.
• San Marcos is known for its natural beauty, with access to the San Marcos River, Spring Lake, and numerous parks and trails. Physicians who enjoy outdoor activities such as kayaking, hiking, and biking may appreciate the city's recreational opportunities.
• Compared to nearby Austin and San Antonio, San Marcos generally offers a more affordable cost of living, including housing costs, utilities, and everyday expenses.
• The city has a strong sense of community, with friendly residents, local events, and a vibrant downtown area. You will appreciate the close-knit community and opportunities to get involved in local organizations or volunteer work.
• Despite its smaller size, San Marcos offers a variety of cultural amenities, including art galleries, theaters, live music venues, and festivals. Residents can enjoy cultural experiences without having to travel far from home.
• San Marcos offers a high quality of life, with a mild climate, low crime rate, and excellent schools. You will appreciate the city's relaxed pace of life and family-friendly environment.

Practice Model: 

• Private practice model - be your own boss!
• Protected salary with bonus potential for the first 2 years
• 3rd year partnership track with ASC ownership buy-in potential, additional ancillary income, and restricted stock grant
• Good combination of general GI with wide open opportunities for advanced cases if interested (not required)- good blend of clinic and hospital
• Shared call

#LI-JC1

Build Satellites. Apply in El Paso. Launch Your Career in Midland.

Have you worked in manufacturing, automotive, or mechanical assembly and want to take that skillset into something bigger? This is it. You’ll be building satellites and they don't get bigger than ours. If you have hands-on experience in manufacturing, automotive, or mechanical assembly, and are ready to apply those skills to something bigger, this is your opportunity. You’ll be contributing to the build of real satellite hardware, supporting one of the most advanced space manufacturing programs in the country.

This position is based in our satellite production facility in Midland, TX, with full relocation provided (details below).

Position Overview

AST SpaceMobile is seeking a Mechanisms Technician to support the assembly, integration, and testing of satellite deployment systems and mechanical subsystems. This role focuses on building and validating precision mechanisms used in large phased-array satellite structures, including hinges, release mechanisms, actuators, and deployment systems.

This position is critical to ensuring reliable deployment of satellite components in orbit.

Compensation & Schedule

• Pay: $23/ based on experience, with overtime opportunities. Higher-level roles are available for more experienced candidates at increased pay.
• Schedule: Standard shift is Monday–Thursday, 7:30 AM – 5:30 PM (4x10) with paid lunch and breaks.
• Flexibility: Night and weekend shifts with increased pay are also available depending on experience and team needs.

What You’ll Do:

• Perform precision assembly and integration of satellite mechanism subsystems (hinges, release mechanisms, actuators, deployment systems).
• Interpret and work from engineering drawings, 3D models, wiring schematics, and assembly procedures.
• Install and route electrical harnesses, connectors, and sensors within tight tolerances and constrained volumes.
• Execute functional, environmental, and acceptance testing (e.g., deployment tests, torque verification, limit switch validation).
• Support mechanism testing including vibration, thermal vacuum (TVAC), and life cycle testing.
• Troubleshoot anomalies during integration and testing; perform rework and corrective actions as required.
• Handle flight hardware in compliance with contamination control and ESD requirements.
• Record build and test data, non-conformances, and work performed in manufacturing systems.
• Collaborate with engineering, quality, and test teams to resolve issues and improve processes.
• Maintain tooling, fixtures, and test setups used for mechanism integration and validation.

What you bring:

• Associate degree or technical certification in mechanical, electrical, or electromechanical technology (or equivalent hands-on experience).
• 2+ years of experience in precision mechanical assembly and/or electrical integration.
• Ability to read and interpret detailed engineering drawings and schematics.
• Experience using hand tools, torque tools, and basic electrical test equipment (multimeter, continuity tester).
• Strong troubleshooting skills across mechanical and electrical systems.

Preferred Qualifications:

• Experience in aerospace or high-reliability hardware environments.
• Familiarity with satellite mechanisms (deployment systems, HDRMs, spring-driven systems, motorized actuators).
• Experience working in cleanroom environments (ISO class standards).
• Knowledge of ESD, FOD, and contamination control practices.
• Experience with environmental testing (vibe, shock, TVAC).
• Soldering, crimping, and harness fabrication experience (IPC standards preferred).

Key Skills:

• Precision assembly and mechanical aptitude
• Electrical integration and harness routing
• Troubleshooting under test conditions
• Attention to detail and configuration control discipline

Physical Requirements & Work Environment:

• Ability to stand and walk for extended periods of time.
• Ability to use hands and fingers to perform repetitive and precision tasks.
• Ability to climb, balance, bend, stoop, kneel, and reach as required to perform job duties.
• Ability to communicate effectively, including talking and hearing.
• Ability to work in, on, around, and in proximity to large structures, equipment, and tooling.
• Ability to lift, push, and/or carry items up to 40 pounds as required.
• Ability to work near moving mechanical parts and equipment.
• Ability to work in and around tight or confined spaces.
• Ability to work in environments that may include exposure to fumes, airborne particles, and/or hazardous materials (e.g., carbon fiber).

Benefits: (Eligibility dependent)

• Medical, dental, vision
• 401(k) (pre-tax & Roth)
• Life insurance, disability coverage
• HSA, transportation benefits
• Employee Assistance Program
• PTO / sick leave

Relocation Support (If You Accept)

• Up to $5,000 in temporary housing (first 3 months)
• $1,050/month stipend to support living arrangements after 1st working month on an ongoing basis

If you are open to relocating to Midland, this can be a career changing, and life changing, move into the high-tech aerospace world offering a new skill set and job security in a very similar environment that will soon feel like home. We encourage you to apply to learn more about AST SpaceMobile and what Midland has to offer.

This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands.  

Position Overview

We are seeking a highly motivated and detail-oriented Electromechanical Technician to support the assembly, integration, and testing of satellite mechanism subsystems, including deployment systems, actuators, hinges, latches, and precision moving hardware. This role requires high attention to detail, adherence to strict aerospace standards, and hands-on expertise in both mechanical and electrical integration within a cleanroom environment.

Key Responsibilities

• Perform precision assembly and integration of satellite mechanism subsystems (hinges, release mechanisms, actuators, deployment systems).
• Interpret and work from engineering drawings, 3D models, wiring schematics, and assembly procedures.
• Install and route electrical harnesses, connectors, and sensors within tight tolerances and constrained volumes.
• Execute functional, environmental, and acceptance testing (e.g., deployment tests, torque verification, limit switch validation).
• Support mechanism testing including vibration, thermal vacuum (TVAC), and life cycle testing.
• Troubleshoot anomalies during integration and testing; perform rework and corrective actions as required.
• Handle flight hardware in compliance with contamination control and ESD requirements.
• Record build and test data, non-conformances, and work performed in manufacturing systems.
• Collaborate with engineering, quality, and test teams to resolve issues and improve processes.
• Maintain tooling, fixtures, and test setups used for mechanism integration and validation.

Qualifications

• Associate degree or technical certification in mechanical, electrical, or electromechanical technology (or equivalent hands-on experience).
• 2+ years of experience in precision mechanical assembly and/or electrical integration.
• Ability to read and interpret detailed engineering drawings and schematics.
• Experience using hand tools, torque tools, and basic electrical test equipment (multimeter, continuity tester).
• Strong troubleshooting skills across mechanical and electrical systems.

Preferred Qualifications

• Experience in aerospace or high-reliability hardware environments.
• Familiarity with satellite mechanisms (deployment systems, HDRMs, spring-driven systems, motorized actuators).
• Experience working in cleanroom environments (ISO class standards).
• Knowledge of ESD, FOD, and contamination control practices.
• Experience with environmental testing (vibe, shock, TVAC).
• Soldering, crimping, and harness fabrication experience (IPC standards preferred).

Key Skills

• Precision assembly and mechanical aptitude
• Electrical integration and harness routing
• Troubleshooting under test conditions
• Attention to detail and configuration control discipline
• Ability to follow strict procedures and documentation

Work Environment

• Cleanroom and integration lab setting
• Handling of sensitive flight hardware
• Use of PPE, ESD controls, and contamination protocols
• May require shift work or extended hours during integration campaigns

This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands. 

Position Overview

We are seeking a highly motivated and detail-oriented Electromechanical Technician to support the assembly, integration, and testing of satellite mechanism subsystems, including deployment systems, actuators, hinges, latches, and precision moving hardware. This role requires high attention to detail, adherence to strict aerospace standards, and hands-on expertise in both mechanical and electrical integration within a cleanroom environment.

Key Responsibilities

• Perform precision assembly and integration of satellite mechanism subsystems (hinges, release mechanisms, actuators, deployment systems).
• Interpret and work from engineering drawings, 3D models, wiring schematics, and assembly procedures.
• Install and route electrical harnesses, connectors, and sensors within tight tolerances and constrained volumes.
• Execute functional, environmental, and acceptance testing (e.g., deployment tests, torque verification, limit switch validation).
• Support mechanism testing including vibration, thermal vacuum (TVAC), and life cycle testing.
• Troubleshoot anomalies during integration and testing; perform rework and corrective actions as required.
• Handle flight hardware in compliance with contamination control and ESD requirements.
• Record build and test data, non-conformances, and work performed in manufacturing systems.
• Collaborate with engineering, quality, and test teams to resolve issues and improve processes.
• Maintain tooling, fixtures, and test setups used for mechanism integration and validation.

Qualifications

• Associate degree or technical certification in mechanical, electrical, or electromechanical technology (or equivalent hands-on experience).
• 2+ years of experience in precision mechanical assembly and/or electrical integration.
• Ability to read and interpret detailed engineering drawings and schematics.
• Experience using hand tools, torque tools, and basic electrical test equipment (multimeter, continuity tester).
• Strong troubleshooting skills across mechanical and electrical systems.

Preferred Qualifications

• Experience in aerospace or high-reliability hardware environments.
• Familiarity with satellite mechanisms (deployment systems, HDRMs, spring-driven systems, motorized actuators).
• Experience working in cleanroom environments (ISO class standards).
• Knowledge of ESD, FOD, and contamination control practices.
• Experience with environmental testing (vibe, shock, TVAC).
• Soldering, crimping, and harness fabrication experience (IPC standards preferred).

Key Skills

• Precision assembly and mechanical aptitude
• Electrical integration and harness routing
• Troubleshooting under test conditions
• Attention to detail and configuration control discipline
• Ability to follow strict procedures and documentation

Work Environment

• Cleanroom and integration lab setting
• Handling of sensitive flight hardware
• Use of PPE, ESD controls, and contamination protocols
• May require shift work or extended hours during integration campaigns

This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands. 

Position Overview

We are seeking a highly motivated and detail-oriented Electromechanical Technician to support the assembly, integration, and testing of satellite mechanism subsystems, including deployment systems, actuators, hinges, latches, and precision moving hardware. This role requires high attention to detail, adherence to strict aerospace standards, and hands-on expertise in both mechanical and electrical integration within a cleanroom environment.

Key Responsibilities

• Perform precision assembly and integration of satellite mechanism subsystems (hinges, release mechanisms, actuators, deployment systems).
• Interpret and work from engineering drawings, 3D models, wiring schematics, and assembly procedures.
• Install and route electrical harnesses, connectors, and sensors within tight tolerances and constrained volumes.
• Execute functional, environmental, and acceptance testing (e.g., deployment tests, torque verification, limit switch validation).
• Support mechanism testing including vibration, thermal vacuum (TVAC), and life cycle testing.
• Troubleshoot anomalies during integration and testing; perform rework and corrective actions as required.
• Handle flight hardware in compliance with contamination control and ESD requirements.
• Record build and test data, non-conformances, and work performed in manufacturing systems.
• Collaborate with engineering, quality, and test teams to resolve issues and improve processes.
• Maintain tooling, fixtures, and test setups used for mechanism integration and validation.

Qualifications

• Associate degree or technical certification in mechanical, electrical, or electromechanical technology (or equivalent hands-on experience).
• 2+ years of experience in precision mechanical assembly and/or electrical integration.
• Ability to read and interpret detailed engineering drawings and schematics.
• Experience using hand tools, torque tools, and basic electrical test equipment (multimeter, continuity tester).
• Strong troubleshooting skills across mechanical and electrical systems.

Preferred Qualifications

• Experience in aerospace or high-reliability hardware environments.
• Familiarity with satellite mechanisms (deployment systems, HDRMs, spring-driven systems, motorized actuators).
• Experience working in cleanroom environments (ISO class standards).
• Knowledge of ESD, FOD, and contamination control practices.
• Experience with environmental testing (vibe, shock, TVAC).
• Soldering, crimping, and harness fabrication experience (IPC standards preferred).

Key Skills

• Precision assembly and mechanical aptitude
• Electrical integration and harness routing
• Troubleshooting under test conditions
• Attention to detail and configuration control discipline
• Ability to follow strict procedures and documentation

Work Environment

• Cleanroom and integration lab setting
• Handling of sensitive flight hardware
• Use of PPE, ESD controls, and contamination protocols
• May require shift work or extended hours during integration campaigns

This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands. 

Build Satellites. Apply in El Paso. Launch Your Career in Midland.

Have you worked in manufacturing, automotive, or mechanical assembly and want to take that skillset into something bigger? This is it. You’ll be building satellites and they don't get bigger than ours. If you have hands-on experience in manufacturing, automotive, or mechanical assembly, and are ready to apply those skills to something bigger, this is your opportunity. You’ll be contributing to the build of real satellite hardware, supporting one of the most advanced space manufacturing programs in the country.

This position is based in our satellite production facility in Midland, TX, with full relocation provided (details below).

Position Overview

AST SpaceMobile is seeking a Mechanisms Technician to support the assembly, integration, and testing of satellite deployment systems and mechanical subsystems. This role focuses on building and validating precision mechanisms used in large phased-array satellite structures, including hinges, release mechanisms, actuators, and deployment systems.

This position is critical to ensuring reliable deployment of satellite components in orbit.

Compensation & Schedule

• Pay: DOE based on experience, with overtime opportunities. Higher-level roles are available for more experienced candidates at increased pay.
• Schedule: Standard shift is Monday–Thursday, 6:00PM – 4:00 AM (4x10) with paid lunch and breaks.
• Flexibility: Day and weekend shifts with increased pay are also available depending on experience and team needs.

What You’ll Do:

• Perform precision assembly and integration of satellite mechanism subsystems (hinges, release mechanisms, actuators, deployment systems).
• Interpret and work from engineering drawings, 3D models, wiring schematics, and assembly procedures.
• Install and route electrical harnesses, connectors, and sensors within tight tolerances and constrained volumes.
• Execute functional, environmental, and acceptance testing (e.g., deployment tests, torque verification, limit switch validation).
• Support mechanism testing including vibration, thermal vacuum (TVAC), and life cycle testing.
• Troubleshoot anomalies during integration and testing; perform rework and corrective actions as required.
• Handle flight hardware in compliance with contamination control and ESD requirements.
• Record build and test data, non-conformances, and work performed in manufacturing systems.
• Collaborate with engineering, quality, and test teams to resolve issues and improve processes.
• Maintain tooling, fixtures, and test setups used for mechanism integration and validation.

What you bring:

• Associate degree or technical certification in mechanical, electrical, or electromechanical technology (or equivalent hands-on experience).
• 2+ years of experience in precision mechanical assembly and/or electrical integration.
• Ability to read and interpret detailed engineering drawings and schematics.
• Experience using hand tools, torque tools, and basic electrical test equipment (multimeter, continuity tester).
• Strong troubleshooting skills across mechanical and electrical systems.

Preferred Qualifications:

• Experience in aerospace or high-reliability hardware environments.
• Familiarity with satellite mechanisms (deployment systems, HDRMs, spring-driven systems, motorized actuators).
• Experience working in cleanroom environments (ISO class standards).
• Knowledge of ESD, FOD, and contamination control practices.
• Experience with environmental testing (vibe, shock, TVAC).
• Soldering, crimping, and harness fabrication experience (IPC standards preferred).

Key Skills:

• Precision assembly and mechanical aptitude
• Electrical integration and harness routing
• Troubleshooting under test conditions
• Attention to detail and configuration control discipline

Physical Requirements & Work Environment:

• Ability to stand and walk for extended periods of time.
• Ability to use hands and fingers to perform repetitive and precision tasks.
• Ability to climb, balance, bend, stoop, kneel, and reach as required to perform job duties.
• Ability to communicate effectively, including talking and hearing.
• Ability to work in, on, around, and in proximity to large structures, equipment, and tooling.
• Ability to lift, push, and/or carry items up to 40 pounds as required.
• Ability to work near moving mechanical parts and equipment.
• Ability to work in and around tight or confined spaces.
• Ability to work in environments that may include exposure to fumes, airborne particles, and/or hazardous materials (e.g., carbon fiber).

Benefits: (Eligibility dependent)

• Medical, dental, vision
• 401(k) (pre-tax & Roth)
• Life insurance, disability coverage
• HSA, transportation benefits
• Employee Assistance Program
• PTO / sick leave

Relocation Support (If You Accept)

• Up to $5,000 in temporary housing (first 3 months)
• $1,050/month stipend to support living arrangements after 1st working month on an ongoing basis

If you are open to relocating to Midland, this can be a career changing, and life changing, move into the high-tech aerospace world offering a new skill set and job security in a very similar environment that will soon feel like home. We encourage you to apply to learn more about AST SpaceMobile and what Midland has to offer.

This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands.  

Build Satellites. Apply in El Paso. Launch Your Career in Midland.

Have you worked in manufacturing, automotive, or mechanical assembly and want to take that skillset into something bigger? This is it. You’ll be building satellites and they don't get bigger than ours. If you have hands-on experience in manufacturing, automotive, or mechanical assembly, and are ready to apply those skills to something bigger, this is your opportunity. You’ll be contributing to the build of real satellite hardware, supporting one of the most advanced space manufacturing programs in the country.

This position is based in our satellite production facility in Midland, TX, with full relocation provided (details below).

Position Overview

AST SpaceMobile is seeking a Mechanisms Technician to support the assembly, integration, and testing of satellite deployment systems and mechanical subsystems. This role focuses on building and validating precision mechanisms used in large phased-array satellite structures, including hinges, release mechanisms, actuators, and deployment systems.

This position is critical to ensuring reliable deployment of satellite components in orbit.

Compensation & Schedule

• Pay: DOE based on experience, with overtime opportunities. Higher-level roles are available for more experienced candidates at increased pay.
• Schedule: Standard shift is Friday–Sunday, 6:00 PM – 6:00 AM (3x12's) with paid lunch and breaks.
• Flexibility: Weekday and weekend day shifts are also available depending on experience and team needs.

What You’ll Do:

• Perform precision assembly and integration of satellite mechanism subsystems (hinges, release mechanisms, actuators, deployment systems).
• Interpret and work from engineering drawings, 3D models, wiring schematics, and assembly procedures.
• Install and route electrical harnesses, connectors, and sensors within tight tolerances and constrained volumes.
• Execute functional, environmental, and acceptance testing (e.g., deployment tests, torque verification, limit switch validation).
• Support mechanism testing including vibration, thermal vacuum (TVAC), and life cycle testing.
• Troubleshoot anomalies during integration and testing; perform rework and corrective actions as required.
• Handle flight hardware in compliance with contamination control and ESD requirements.
• Record build and test data, non-conformances, and work performed in manufacturing systems.
• Collaborate with engineering, quality, and test teams to resolve issues and improve processes.
• Maintain tooling, fixtures, and test setups used for mechanism integration and validation.

What you bring:

• Associate degree or technical certification in mechanical, electrical, or electromechanical technology (or equivalent hands-on experience).
• 2+ years of experience in precision mechanical assembly and/or electrical integration.
• Ability to read and interpret detailed engineering drawings and schematics.
• Experience using hand tools, torque tools, and basic electrical test equipment (multimeter, continuity tester).
• Strong troubleshooting skills across mechanical and electrical systems.

Preferred Qualifications:

• Experience in aerospace or high-reliability hardware environments.
• Familiarity with satellite mechanisms (deployment systems, HDRMs, spring-driven systems, motorized actuators).
• Experience working in cleanroom environments (ISO class standards).
• Knowledge of ESD, FOD, and contamination control practices.
• Experience with environmental testing (vibe, shock, TVAC).
• Soldering, crimping, and harness fabrication experience (IPC standards preferred).

Key Skills:

• Precision assembly and mechanical aptitude
• Electrical integration and harness routing
• Troubleshooting under test conditions
• Attention to detail and configuration control discipline

Physical Requirements & Work Environment:

• Ability to stand and walk for extended periods of time.
• Ability to use hands and fingers to perform repetitive and precision tasks.
• Ability to climb, balance, bend, stoop, kneel, and reach as required to perform job duties.
• Ability to communicate effectively, including talking and hearing.
• Ability to work in, on, around, and in proximity to large structures, equipment, and tooling.
• Ability to lift, push, and/or carry items up to 40 pounds as required.
• Ability to work near moving mechanical parts and equipment.
• Ability to work in and around tight or confined spaces.
• Ability to work in environments that may include exposure to fumes, airborne particles, and/or hazardous materials (e.g., carbon fiber).

Physical Requirements & Work Environment:

• Ability to stand and walk for extended periods of time.
• Ability to use hands and fingers to perform repetitive and precision tasks.
• Ability to climb, balance, bend, stoop, kneel, and reach as required to perform job duties.
• Ability to communicate effectively, including talking and hearing.
• Ability to work in, on, around, and in proximity to large structures, equipment, and tooling.
• Ability to lift, push, and/or carry items up to 40 pounds as required.
• Ability to work near moving mechanical parts and equipment.
• Ability to work in and around tight or confined spaces.
• Ability to work in environments that may include exposure to fumes, airborne particles, and/or hazardous materials (e.g., carbon fiber).

Benefits: (Eligibility dependent)

• Medical, dental, vision
• 401(k) (pre-tax & Roth)
• Life insurance, disability coverage
• HSA, transportation benefits
• Employee Assistance Program
• PTO / sick leave
• Up to $5,000 in temporary housing (first 3 months)
• $1,050/month stipend to support living arrangements after 1st working month on an ongoing basis

If you are open to relocating to Midland, this can be a career changing, and life changing, move into the high-tech aerospace world offering a new skill set and job security in a very similar environment that will soon feel like home. We encourage you to apply to learn more about AST SpaceMobile and what Midland has to offer.

This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands.  

Build Satellites. Apply in El Paso. Launch Your Career in Midland.

Have you worked in manufacturing, automotive, or mechanical assembly and want to take that skillset into something bigger? This is it. You’ll be building satellites and they don't get bigger than ours. If you have hands-on experience in manufacturing, automotive, or mechanical assembly, and are ready to apply those skills to something bigger, this is your opportunity. You’ll be contributing to the build of real satellite hardware, supporting one of the most advanced space manufacturing programs in the country.

This position is based in our satellite production facility in Midland, TX, with full relocation provided (details below).

Position Overview

AST SpaceMobile is seeking a Mechanisms Technician to support the assembly, integration, and testing of satellite deployment systems and mechanical subsystems. This role focuses on building and validating precision mechanisms used in large phased-array satellite structures, including hinges, release mechanisms, actuators, and deployment systems.

This position is critical to ensuring reliable deployment of satellite components in orbit.

Compensation & Schedule

• Pay: DOE based on experience, with overtime opportunities. Higher-level roles are available for more experienced candidates at increased pay.
• Schedule: Standard shift is Friday–Sunday, 6:00 AM – 6:00 PM (3x12's) with paid lunch and breaks.
• Flexibility: Night and weekday shifts are also available depending on experience and team needs.

What You’ll Do:

• Perform precision assembly and integration of satellite mechanism subsystems (hinges, release mechanisms, actuators, deployment systems).
• Interpret and work from engineering drawings, 3D models, wiring schematics, and assembly procedures.
• Install and route electrical harnesses, connectors, and sensors within tight tolerances and constrained volumes.
• Execute functional, environmental, and acceptance testing (e.g., deployment tests, torque verification, limit switch validation).
• Support mechanism testing including vibration, thermal vacuum (TVAC), and life cycle testing.
• Troubleshoot anomalies during integration and testing; perform rework and corrective actions as required.
• Handle flight hardware in compliance with contamination control and ESD requirements.
• Record build and test data, non-conformances, and work performed in manufacturing systems.
• Collaborate with engineering, quality, and test teams to resolve issues and improve processes.
• Maintain tooling, fixtures, and test setups used for mechanism integration and validation.

What you bring:

• Associate degree or technical certification in mechanical, electrical, or electromechanical technology (or equivalent hands-on experience).
• 2+ years of experience in precision mechanical assembly and/or electrical integration.
• Ability to read and interpret detailed engineering drawings and schematics.
• Experience using hand tools, torque tools, and basic electrical test equipment (multimeter, continuity tester).
• Strong troubleshooting skills across mechanical and electrical systems.

Preferred Qualifications:

• Experience in aerospace or high-reliability hardware environments.
• Familiarity with satellite mechanisms (deployment systems, HDRMs, spring-driven systems, motorized actuators).
• Experience working in cleanroom environments (ISO class standards).
• Knowledge of ESD, FOD, and contamination control practices.
• Experience with environmental testing (vibe, shock, TVAC).
• Soldering, crimping, and harness fabrication experience (IPC standards preferred).

Key Skills:

• Precision assembly and mechanical aptitude
• Electrical integration and harness routing
• Troubleshooting under test conditions
• Attention to detail and configuration control discipline

Physical Requirements & Work Environment:

• Ability to stand and walk for extended periods of time.
• Ability to use hands and fingers to perform repetitive and precision tasks.
• Ability to climb, balance, bend, stoop, kneel, and reach as required to perform job duties.
• Ability to communicate effectively, including talking and hearing.
• Ability to work in, on, around, and in proximity to large structures, equipment, and tooling.
• Ability to lift, push, and/or carry items up to 40 pounds as required.
• Ability to work near moving mechanical parts and equipment.
• Ability to work in and around tight or confined spaces.
• Ability to work in environments that may include exposure to fumes, airborne particles, and/or hazardous materials (e.g., carbon fiber).

Benefits: (Eligibility dependent)

• Medical, dental, vision
• 401(k) (pre-tax & Roth)
• Life insurance, disability coverage
• HSA, transportation benefits
• Employee Assistance Program
• PTO / sick leave

Relocation Support (If You Accept)

• Up to $5,000 in temporary housing (first 3 months)
• $1,050/month stipend to support living arrangements after 1st working month on an ongoing basis

If you are open to relocating to Midland, this can be a career changing, and life changing, move into the high-tech aerospace world offering a new skill set and job security in a very similar environment that will soon feel like home. We encourage you to apply to learn more about AST SpaceMobile and what Midland has to offer.

This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands.  

Sr. Application Developer

Job Description 

• Discussions with Client to get the User / Business Requirements 
• Translate User / Business Requirements to Technical Requirements 
• Design and develop responsive web applications using React.js as the primary frontend framework.
• Maintain and migrate minimal legacy components built in Angular.
• Collaborate with UX/UI designers to implement pixel-perfect user interfaces using React, JavaScript, HTML, CSS.
• Write and optimize PL/SQL stored procedures, functions, packages, and triggers in Oracle.
• Support backend development with Java, Spring Boot, Microservices and REST APIs when necessary.
• Perform system integration with backend services and ensure efficient data exchange between layers.
• Participate in code reviews, technical discussions, and Agile ceremonies.

Required Skills:

• Strong experience with React.js (including Hooks, Redux, or Context API).
• Strong experience with Oracle PL/SQL: writing complex queries, procedures, and optimizing performance.
• Solid working knowledge of Java and Spring Boot.
• Familiarity with integrating React applications with RESTful APIs and microservices.
• Basic understanding of Angular (for light maintenance or migration).
• Proficiency with Git, code versioning, and Agile tools (e.g., Jira, Confluence).
• Strong analytical and debugging skills.

As Assistant Head of School, you will support a Bezos Academy school with children ages three through five as part of a growing multi-state network of high quality, tuition-free, Montessori-inspired preschools in under-resourced communities. You will work closely with the Head of School to ensure smooth school operations, build a strong family community, develop teaching staff, and support the educational experience for each child in every classroom. You bring leadership and management experience, and a passion for our mission to expand access to high quality preschool in under-resourced communities. The Assistant Head of School plays a vital role in ensuring smooth operations and effective communication within the school community.

LOCATION

We are actively hiring for an Assistant Head of School for the launch of our new preschool in Denton (1820 Frame Street, Denton, TX 76209).

We anticipate a start date in the spring/summer of 2026 to support the launch of the school for the 2026-2027 school year.  

Relocation assistance is available for this role.

COMPENSATION AND BENEFITS

• This is a full-time, benefits-eligible, salaried position. 
• The full salary range for this position is $82,000 - $123,000. The upper third of the salary range is typically reserved for existing employees who have been in the role for multiple years and demonstrate strong performance over time. Starting salary will vary by qualifications and prior experience.
• This role includes 15 paid days of vacation, 4 days of paid personal time off, and 9 paid days of sick (care) time prorated based on your position start date, as well as 9 paid holidays, 5 paid days off for an organization-wide winter break, and additional time off if required by applicable law. Benefits for this role include medical, dental, and vision insurance, life insurance, disability insurance, a 401(k) plan with a 4% employer contribution match, paid parental leave, an employer-matched flexible spending account for dependent care, and more. Please see here for details.

MINIMUM REQUIREMENTS

• Bachelor’s degree
• Five or more years of teaching or leading in an accredited childcare center or school with young children (ages 0 through 3^rd grade)
• 1+ years of experience with operational or instructional leadership of a multi-classroom school/center (e.g. as an Assistant Head of School, coaching other teachers, leading community outreach or similar)
• 2+ years prior work experience with children and families in low-income communities in the US OR significant personal experience in low-income communities in the US (grew up and/or attended school in)
• Exceptional written and verbal communication skills
• Strong personal commitment to diversity, equity, and inclusiveness

PREFERRED REQUIREMENTS

• Experience as head of school/center director for a preschool
• Meet the minimum qualifications for being a school director in Texas
• Experience monitoring compliance with local, state, and federal regulations
• Experience managing vendors and addressing performance issues
• Experience with Montessori philosophy and curriculum
• Proven results coaching and supervising staff

RESPONSIBILITIES 

• Directly manage and coach school staff, including Assistant Teachers and Food Service Assistants
• Assist in the development and implementation of school policies, procedures, and strategic initiatives as directed by the Head of Schools
• Identify and address areas of improvement and implement efficient systems to enhance operational effectiveness
• Monitor and address any operational issues or emergencies, providing timely and effective solutions to minimize disruptions
• Supervise facilities management, including maintenance, security, and safety protocols
• Serve as the point of contact with the site partner and all vendors to ensure services meet expectations
• Ensure all physical work environments within the local schools are safe, well-equipped, organized efficiently, and operating successfully for diverse students, families, and staff, including conducting regular internal audits
• Conduct weekly internal licensing and facility audits and daily walk-throughs to ensure school is well-maintained and issues are proactively addressed
• As needed, serve as the school’s licensing designee when the Head of School is not in the building

 Please click here for the full job description.

Bezos Academy is an Equal Opportunity Employer. All applicants receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Bezos Academy participates in E-Verify and will provide the federal government with employee Form I-9 Information to confirm authorization to work in the U.S. Bezos Academy only uses E-Verify once a candidate has accepted a job offer and completed the Form I-9. If E-Verify cannot confirm that an employee is authorized to work, Bezos Academy will give the employee written instructions and an opportunity to contact the Department of Homeland Security (DHS) or Social Security Administration (SSA) so the employee can begin to resolve the issue before any adverse employment action is taken. For more information about your right to work, please see the Notice of Right to Work.

• Taking Patient Vital Signs 
• Taking Medical Histories 
• Preparing Patients for Medical Tests and Examinations 
• Assisting Physicians During Examinations 
• Explaining Medical Procedures to Patients 
• Sterilizing Medical Instruments 
• Removing Sutures 
• Calling or electronic entering Prescriptions into Pharmacies
• Preparing Patients for X-Rays 
• Administering Topical, Oral, or Intramuscular Medications 
• Transcribing all notes and documents related to treatments. 
• Other duties as assigned
• Travel to clinics within the region as needed for business operation or staffing coverage requirements.

​

• High School Diploma or GED equivalent
• Certification as a Medical Assistant or diploma from an accredited school is highly preferred.
• A minimum of one year experience as a Medical Assistant in a clinic, physician practice or urgent care setting 

• Strong knowledge of medical correspondence, managing electronic medical records 
• Excellent customer service skills 
• Experience as a Phlebotomist is desirable but not required. 
• Excellent verbal and written communication skills 
• Team player, able to work with provider and other team members of the care team.
• Bilingual (English and Spanish) preferred

As Head of School, you will lead a Bezos Academy with children ages three through five as part of a growing multi-state network of high quality Montessori-inspired preschools in under-resourced communities. You will hire teachers, support student recruitment efforts, build a strong family community, coach and develop teaching staff, and ensure the educational experience for each child in every classroom is of the highest standard. You will bring significant teaching and school leadership experience, knowledge of child development, management experience, exceptional communication skills, and experience working with families and leaders from diverse community areas. Above all, you demonstrate passion for our mission to expand access to high quality preschool in under-resourced communities.  

LOCATION

We are actively hiring for a Head of School at our preschool in North Dallas (8703 Stults Rd. Ste 100 Dallas, TX 75243). We expect a start date in the spring/summer of 2026 to align with the start of the 2026-2027 school year.  

COMPENSATION AND BENEFITS

• This is a full-time, benefits-eligible, salaried position.  
• The full salary range for this position is $101,000 - $162,000 per year. The upper third of the salary range is typically reserved for existing employees who have been in the role for multiple years and demonstrate strong performance over time. Starting salary will vary by qualifications and prior experience. 
• This role includes 15 paid days of vacation, 4 days of paid personal time off, and 9 paid days of sick (care) time prorated based on your position start date, as well as 9 paid holidays, 5 paid days off for an organization-wide winter break, and additional time off if required by applicable law. Benefits for this role include medical, dental, and vision insurance, life insurance, disability insurance, a 401(k) plan with a 4% employer contribution match, paid parental leave, an employer-matched flexible spending account for dependent care, and more. Please see here for details.

MINIMUM QUALIFICATIONS

• Bachelor’s degree
• 5 or more years of teaching or leading in an accredited childcare center or school with young children (ages 0 through 3rd grade)
• 1+ years of experience with operational or instructional leadership of a multi-classroom school/center (e.g. as an Assistant Head of School, coaching other teachers, leading community outreach or similar) or top leadership of a single-classroom site
• 2+ years prior work experience with children and families in low-income communities in the US OR significant personal experience in low-income communities in the US (grew up and/or attended school in)
• Meet the minimum qualifications for being a school director in Texas
• Strong track record of leading classrooms with meaningful, measurable outcomes for children
• Strong personal commitment to diversity, equity, and inclusiveness

PREFERRED QUALIFICATIONS

• Experience as head of school/center director for a preschool or administrative leadership experience in a K-3 setting
• Primary diploma from an AMI, AMS, or MACTE-accredited institute
• Experience implementing Montessori philosophy and curriculum
• Demonstrated experience with strategic planning and program evaluation
• Background knowledge of the fiscal and operating needs of a school
• Proven results coaching and developing teachers
• Experience working with children and families in low-income areas
• Experience launching all facets of a new school with multiple classrooms successfully

RESPONSIBILITIES 

• Assume responsibility for the day-to-day operation of the school 
• Support the planning, preparation, and delivery of instructional activities that facilitate active Montessori-inspired learning experiences 
• Supervise all faculty and staff, both teaching and non-teaching 
• Provide administrative and professional leadership for faculty and staff 
• Oversee the development, implementation, and evaluation of programs and services that support the mission, vision, and strategic goals of the school and Bezos Academy 
• Provide leadership for activities which affect the current and future development of the school (such as strategic planning and setting curricular goals) 
• Ensure that program quality is maintained and that classrooms have appropriate instructional materials 
• Supervise and participate in the selecting and hiring of qualified persons to serve as members of the faculty 
• Support an inclusive and respectful partnership between families, community, and school on behalf of the child 
• Partner with local community agencies to provide additional wrap around supports and services for students and families 
• Support with the initial and ongoing student recruitment efforts 
• Create ways for families to stay informed, educated, and active in the Bezos Academy community 
• Oversee effective marketing, communications, and outreach to the school community 
• Serve as the public spokesperson for the school and for Montessori-inspired education 

 Please click here for the full job description.

Bezos Academy is an Equal Opportunity Employer. All applicants receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Bezos Academy participates in E-Verify and will provide the federal government with employee Form I-9 Information to confirm authorization to work in the U.S. Bezos Academy only uses E-Verify once a candidate has accepted a job offer and completed the Form I-9. If E-Verify cannot confirm that an employee is authorized to work, Bezos Academy will give the employee written instructions and an opportunity to contact the Department of Homeland Security (DHS) or Social Security Administration (SSA) so the employee can begin to resolve the issue before any adverse employment action is taken. For more information about your right to work, please see the Notice of Right to Work.

Territory: North and Northeast Houston region, including The Woodlands, Spring, Conroe, Kingwood, Beaumont, and surrounding communities.

The Associate Clinical Oncology Specialist (ACOS) is responsible for contributing to account sales, service, and support activities of all Oncology products. The role includes ensuring patients adherence to the prescribed test cadence with a focus on improving patient outcomes. The individual will identify areas of improvement in clinical workflows, test fulfillment, internal systems and processes. Responsibilities include cultivating and maintaining key relationships and working with customers and internal partners that enable Signatera patient retention and unit growth within existing customers. 

Primary Responsibilities:

• Work with assigned COS to grow, maintain & support existing customers 
• Build relationships with key personnel at assigned Oncology accounts to facilitate unit growth.
• Analyze and monitor patient testing to ensure that patients remain on the protocol prescribed by the Oncologist.
• Assess the needs of medical professionals and staff members with a focus on customer support, coordination of logistics, and problem solving 
• Become experts on all Natera Oncology products and processes to maximize effectiveness in the field. 
• Educate medical professionals on the tools and resources that Natera provides to facilitate test order management
• Utilize and maintain internal reports of key performance indicators (KPIs) related to patient retention and fulfilled order volume.
• Be a key team player within the sales organization who can partner with internal stakeholders, such as sales reps, patient coordinators, territory managers, etc., to achieve the best outcomes for the patient and the provider.

Qualifications:

• Bachelor’s degree preferred or Associate’s degree with minimum of 4 years of relevant experience
• Medical assistant, clinical support, patient liaison or nursing background or a Minimum of 2  years of sales experience 

Knowledge, Skills, and Abilities:

• Thrives in ambiguous environments
• Exceptionally bright, flexible, self-motivated, and results oriented with strong interpersonal and analytical skills 
• Ability to think strategically as well as execute tactically 
• Must act with a sense of urgency 
• Have a strong desire to work in a fast-pace environment and must work independently with an internal drive to be successful 
• Excellent organizational and communication skills (written and verbal) with demonstrated ability to effectively present to both internal and external customers
• Effective time management skills required with a demonstrated ability to assess and prioritize
• Proficient in Microsoft PowerPoint and Excel; Gmail
• Fluent in understanding data spreadsheets and technologies, although the Patient Retention Specialists will continue to lead patient identification and vetting
• Demonstrated ability to quickly learn software and reporting systems

Physical Demands & Work Environment:

• Duties are typically performed in a medical office or hospital setting.
• This position requires the ability to use a computer keyboard, communicate over the telephone and read printed material.
• Duties may require working outside normal working hours (evenings and weekends) at times.
• 25-50% travel required

In addition to a base salary, we offer uncapped commission, a car allowance program, and Restricted Stock Units (RSUs).