Quality Assurance & Quality Control Manager, Nussir Processing Plant 

Location:  Site Base, must be residential to the Nussir Project Site

Reports To: Site Project Director (Construction Phase) / Plant Operations Manager (Operations Phase)

Employment Type: Full-Time, Permanent

Position Summary

The QA/QC Manager is responsible for developing, implementing, and maintaining quality assurance and quality control systems for a mineral processing plant across both the construction and operational phases.

This role ensures that all engineering, procurement, construction, commissioning, and operational activities comply with applicable standards, specifications, and regulatory requirements. The QA/QC Manager plays a critical role in establishing a culture of quality, continuous improvement, and operational excellence.

Key Responsibilities

1. Construction Phase (EPCM / Build-Out)

• Develop and implement the Project Quality Management Plan (QMP)
• Establish QA/QC procedures, inspection and test plans (ITPs), and quality documentation systems
• Review engineering deliverables for compliance with specifications and standards
• Ensure contractor and vendor quality programs meet project requirements
• Oversee inspection and testing of:
• Structural, mechanical, piping, and electrical installations
• Process equipment (crushers, mills, flotation cells, thickeners, etc.)
• Manage non-conformance reports (NCRs), corrective actions, and root cause analysis
• Coordinate third-party inspections and certifications
• Conduct audits of EPCM contractors, suppliers, and site activities
• Ensure proper material traceability and documentation control
• Support pre-commissioning and commissioning activities, including system handover documentation

1. Commissioning & Start-Up

• Verify quality readiness for commissioning systems and subsystems
• Ensure completion of punch lists and deficiency tracking
• Validate test work, calibration, and performance verification processes
• Support development of operational quality procedures and control plans
• Ensure turnover documentation is complete, accurate, and auditable

1. Operations Phase (Process Plant)

• Develop and maintain the Operational Quality Management System (QMS)
• Implement QA/QC procedures for:
• Ore sampling and assaying
• Metallurgical accounting and reconciliation
• Process control and optimization
• Product quality (concentrates, tailings, etc.)
• Oversee laboratory QA/QC programs, including:
• Sample preparation, analysis, and certification
• External lab audits and round-robin testing
• Monitor plant performance against quality KPIs and metallurgical targets
• Lead investigations into production deviations and quality failures
• Ensure compliance with regulatory, environmental, and customer specifications
• Drive continuous improvement initiatives (Lean, Six Sigma principles)

1. Documentation & Compliance

• Establish and manage document control systems for QA/QC records
• Ensure compliance with applicable standards (e.g., ISO 9001 or equivalent)
• Maintain inspection records, test reports, and quality dossiers
• Prepare quality reports for management and stakeholders
• Support internal and external audits

1. Leadership & Stakeholder Coordination

• Lead and develop the QA/QC team (inspectors, lab personnel, technicians)
• Interface with engineering, construction, operations, and maintenance teams
• Act as the primary quality liaison with contractors, vendors, and regulators
• Promote a strong quality and safety culture across the site

Qualifications

• Bachelor’s degree in:
• Metallurgical Engineering
• Chemical Engineering
• Mineral Processing
• Mechanical Engineering or related field
• Professional designation (P.Eng. or equivalent) preferred

Experience

• 10+ years of experience in QA/QC within mining or mineral processing
• Experience in both plant construction and operations is strongly preferred
• Proven experience in EPC/EPCM project environments
• Strong background in process plant systems (crushing, grinding, flotation, dewatering, etc.)
• Experience with laboratory QA/QC and metallurgical accounting is an asset

Technical Skills

• Strong knowledge of QA/QC systems, standards, and methodologies
• Experience with:
• Inspection & Test Plans (ITPs)
• Non-Conformance Management Systems
• Root Cause Analysis (RCA)
• Familiarity with ISO standards (e.g., ISO 9001)
• Understanding of metallurgical processes and plant performance metrics
• Proficiency in data analysis and reporting tools

Core Competencies

• Leadership and team development
• Attention to detail and high standards of quality
• Problem-solving and analytical thinking
• Strong communication and stakeholder management
• Organizational and documentation discipline
• Continuous improvement mindset

Working Conditions

• Site-based role with rotation during construction and operations
• Exposure to industrial plant environments (noise, dust, heavy equipment)
• May require travel to vendor facilities and laboratories

Key Performance Indicators (KPIs)

• Compliance with project and operational quality standards
• Reduction in NCRs and rework during construction
• Successful commissioning and handover quality metrics
• Accuracy of metallurgical accounting and sampling
• Laboratory QA/QC performance and audit results
• Continuous improvement outcomes and cost savings

Equal Employment Opportunity

Blue Moon Metals Inc. is an Equal Opportunity Employer and complies with all applicable local employment laws. We are committed to maintaining a safe, inclusive, and respectful workplace.

Blue Moon Metals is seeking an experienced and dynamic Senior Project Engineer to join our corporate office, supporting all projects across our organization. This pivotal role is responsible for providing technical expertise, project oversight, and strategic guidance to ensure successful delivery of engineering projects company-wide.  The Senior Project Engineer's immediate assignment will be to our Nussir Project in Northern Norway, requiring long-term stays or relocation to the project region.

Key Responsibilities

• Manage and coordinate engineering efforts for multiple projects, ensuring adherence to technical standards, budgets, and schedules.
• Support project managers and site teams with technical expertise, problem-solving, and risk assessment throughout the project lifecycle.
• Develop and review project scopes, specifications, drawings, and deliverables for accuracy and compliance with company and regulatory requirements.
• Collaborate with cross-functional teams—including design, procurement, construction, and quality assurance—to drive project objectives and resolve technical challenges.
• Facilitate technical meetings, workshops, and design reviews; present recommendations to senior leadership and stakeholders.
• Monitor project progress, identify deviations, and implement corrective actions as required.
• Lead initiatives to improve engineering processes, standardization, and best practices across all projects.
• Mentor and support the professional development of junior engineers and project staff.
• Stay current on industry trends, emerging technologies, and regulatory changes relevant to the metals and construction sectors.

Qualifications and Experience

• Bachelor’s degree in Engineering (Mechanical, Civil, Structural, or related discipline); Master’s degree or P.Eng designation is an asset.
• Minimum 8 years of progressive engineering experience, with at least 3 years in a senior or lead project role in metals, mining, construction, or heavy industry.
• Demonstrated success managing complex, multi-disciplinary projects from conception to completion.
• Strong understanding of project management methodologies, engineering standards, and regulatory requirements in Canada and internationally.
• Exceptional communication, leadership, and interpersonal skills.
• Proficiency with engineering and project management software (e.g., Deswik or other CAD software, MS Project, Primavera).
• Ability to travel domestically and internationally as needed.

Pay range and compensation package

Compensation details will be discussed during the interview process.

Equal Opportunity Statement

We are committed to diversity and inclusivity in our hiring practices and encourage applications from all qualified individuals.

Engineering, Procurement & Construction (EPC) Contract Manager

Role Overview

Reporting to Blue Moon’s Director, Supply Chain, the Engineering, Procurement & Construction (EPC) Contract Manager is responsible for developing, negotiating, administering, and controlling large‑scale EPC contracts for Blue Moon’s mining development projects, including mine site infrastructure, processing plant, and supporting facilities. The immediate focus will be on the Nussir project in Repparfjord, Norway.

This role manages the entire contract lifecycle—from strategy development through tendering, evaluation, award, execution, change management, and close‑out—while ensuring strong commercial, technical, and schedule performance from EPC contractors.

The EPC Contract Manager is also the process owner for all EPC contract workflows within the ERP system (SAP), ensuring accurate structuring, reporting, and compliance throughout execution.

The EPC Contract Manager will work closely with project management, project controls, engineering, construction management and finance to ensure successful delivery of a fully developed mine site and process plant ready for operations.

Key Responsibilities

Contract Strategy & Preparation

• Develop EPC contracting strategies aligned with project delivery models, risk allocation, and project execution plans.
• Prepare contract packages including technical scope, commercial terms, specifications, schedules, and performance requirements.
• Define evaluation criteria for EPC tenders (technical, commercial, HSE, schedule, financial capability).
• Conduct market assessments and provide input on contractor selection strategies.

Tendering & Evaluation

• Lead and coordinate the full EPC tender process: RFIs, RFPs, bidder meetings, site visits, clarifications, and evaluations.
• Facilitate interdisciplinary evaluation teams from engineering, procurement, construction, finance, and legal.
• Prepare negotiation strategies and lead commercial/contractual negotiations with EPC bidders.
• Develop clear award recommendations for internal approval and governance processes.

EPC Contract Administration & Execution

• Act as the primary commercial interface with EPC contractors during engineering, procurement, construction, commissioning, and completion.
• Monitor contractor performance against contract obligations, KPIs, progress milestones, quality standards, HSE requirements, and schedule.
• Manage change orders, claims, variations, and deviations according to contract terms, ensuring robust documentation and approval routes.
• Review EPC schedules, progress reports, cash flow forecasts, and performance metrics.
• Implement contract risk registers and actively manage emerging risks and opportunities.

ERP Process Ownership

• Serve as Superuser / Process Owner for EPC contract management within SAP.
• Ensure contract structures, WBS, milestones, budgets, deliverables, and change workflows are correctly configured in ERP.
• Develop automated reporting dashboards for progress, cost, variations, and risks.
• Train project team members and EPC contractors in ERP-based contract execution processes.
• Ensure accuracy of data entry, documentation, and compliance with governance requirements.

Financial & Commercial Controls

• Validate progress measurements to support invoice approvals and milestone payments.
• Work with project controls and finance to maintain cost forecasts, earned value reporting, and contract value tracking.
• Analyze commercial impacts of design changes, delays, contractor performance issues, and external risks.
• Support dispute management, claim assessment, and resolution processes with legal teams.

Stakeholder Collaboration

• Collaborate closely with engineering, project management, project controls, construction, procurement, logistics, planning, finance and HSE.
• Participate in project progress meetings, design reviews, and site inspections.
• Provide contract guidance to internal teams and ensure contractual alignment across all project interfaces.
• Support integration between EPC contractors and owner’s team processes and governance.

Contract Close‑Out

• Manage technical and commercial close‑out including punch lists, final accounts, warranties, and documentation handover.
• Ensure proper capture of as‑built documents, performance guarantees, O&M manuals, and training materials.
• Lead lessons‑learned workshops and continuous improvement initiatives for future EPC phases.

 Qualifications & Experience

• Master’s or Bachelor’s degree within Supply Chain, Engineering, Business, or Project Management is required.
•  Minimum 7 years of experience in EPC contracting, major capital projects, or heavy industrial sectors (mining, oil & gas, process plant construction, energy).
• Strong understanding of EPC contract models, project delivery strategies, and international contracting standards.
• Demonstrated experience managing large EPC contracts through full lifecycle.
• Hands-on experience with ERP systems (SAP preferred).
• Excellent negotiation, commercial analysis, and contract administration skills.
• Strong knowledge of project controls, risk management, and schedule management.
• Ability to travel internationally up to 50% annually.

Key Competencies

• High commercial awareness and contract risk understanding
• Strong communication and coordination skills
• Analytical and detail-driven
• Able to manage multiple interfaces across disciplines
• Strong decision-making and problem-solving abilities
• Ability to work effectively in large, complex project environments.
• Ability to work onsite at Nussir in Norway 2 consecutive weeks per month.

Please note: The contract period is for 24 months with possibility for extension.

Pay range and compensation package

Compensation details will be discussed during the interview process.

Equal Opportunity Statement

We are committed to diversity and inclusivity in our hiring practices and encourage applications from all qualified individuals.

About the Company

We are a fast-growing, internationally focused SaaS company delivering advanced software solutions that help organisations operating in high-risk environments manage risk, ensure regulatory compliance, and protect people, assets and the environment.

We have two main strategic platforms. 

1. For process facilities, e.g. oil and chemical production assets, we provide a platform for managing requirements for complex piping systems.
2. Our other platform provides a holistic view of operational risk and barrier performance, enabling better decision-making and safer operations across global energy and industrial markets.

Guided by our values of being proactive, innovative, adaptive, and caring, we continuously evolve our platform and partnerships to create safer, more efficient operations for our clients.

With a diverse team representing multiple nationalities, we operate globally and serve customers across Europe, the Americas, Middle East and Africa. We are now strengthening our commercial function with the appointment of a high-calibre Business Development Manager to help scale revenue and unlock strategic growth opportunities.

The Opportunity

This is a full-cycle commercial role with full ownership of revenue generation across new and existing accounts. You will be responsible for originating, qualifying, progressing and closing opportunities — while ensuring leadership and technical stakeholders are engaged at the right stage of the sales process.This role is ideal for someone who thrives in long, consultative sales cycles, understands complex stakeholder environments, and is motivated by building a sustainable pipeline rather than chasing short-term wins.

Success in this role means:

• Independently building and managing a high-quality pipeline
• Progressing multi-stakeholder deals through structured qualification
• Closing strategic agreements aligned to long-term company growth
• Contributing to predictable, well-governed revenue performance 

Key Responsibilities

1. Pipeline Generation & Account Development

• Generate and manage a self-sourced pipeline through structured outbound activity and targeted account engagement.
• Follow up and convert inbound leads (demo requests, referrals, consultant introductions).
• Develop strategic account plans for high-value target organisations.
• Identify expansion opportunities within existing customers.

1. Full-Cycle Sales Ownership

• Own the entire sales process from initial outreach through discovery, qualification, evaluation, negotiation and contract close.
• Run structured first-stage qualification independently before involving executive or technical leadership.
• Lead multi-stakeholder sales processes involving management, engineering, IT/security, procurement and executive decision-makers.
• Develop value cases and commercial proposals aligned to customer business objectives.
• Maintain consistent follow-up cadence appropriate to long enterprise sales cycles.

1. Stakeholder & Internal Collaboration

• Collaborate with CTO and technical teams during IT/security evaluations and technical validation.
• Work closely with implementation/delivery teams to ensure smooth transition from contract to onboarding.
• Contribute to continuous improvement of sales processes, qualification standards and commercial best practices.

1. Commercial Discipline

• Maintain accurate forecasting and CRM hygiene. Experience with Hubspot preferred but not essential.
• Manage deal governance and ensure structured progression of opportunities.
• Work toward an annual revenue target (combined new and expansion revenue) aligned to company growth objectives.

What We are Looking For 

Essential Experience

• Proven experience selling B2B SaaS solutions and running full sales cycles.
• Demonstrated success managing complex, multi-stakeholder enterprise sales processes.
• Proven experience in tender processes
• Strong outbound capability and comfort building your own pipeline.
• Experience selling into structured environments involving IT, engineering, operations or compliance-driven organisations.
• Track record of managing long sales cycles with persistence and commercial discipline.
• Fluent in written and spoken English.

Highly Desirable

• Experience in energy, industrial, engineering or other high-risk operational sectors.
• Experience working with global accounts across multiple geographies.
• Familiarity with structured sales methodologies as well as relationship and value-based selling frameworks.
• Experience using modern sales tools, CRM systems and mutual action plans.
• Norwegian language skills.

Personal Attributes

We are looking for someone who:

• Is patient, persistent and resilient in long-cycle sales environments.
• Has strong commercial judgement and understands when and how to engage stakeholders.
• Is intellectually curious and capable of quickly learning technical subject matter.
• Operates independently while collaborating effectively across teams.
• Takes ownership of outcomes and thrives in an entrepreneurial, scaling environment.
• Understands the importance of qualification and disciplined opportunity management.