What you’ll do

Become part of an iconic brand that is set to revolutionize the electric pick-up truck & rugged SUV marketplace by achieving the following:

• Lead the design and engineering of air suspension components including air springs, compressors, valves, height sensors, lines, reservoirs, and electronic control hardware. 
• Ensure implementation of specifications, DFMEAs, and performance targets. 
• Review/Release 3D models, drawings, and engineering documents. 
• Review internal/external development plans, and review test data. 
• Analyze test results, identify root causes, and drive design improvements. 
• Support vehicle-level tuning and calibration engineers in the development of desired ride, comfort, and handling. 
• Work with controls engineers to develop and refine air suspension control strategies (leveling, damping, load management, compressor duty cycle management). 
• Validate system behavior using HIL/SIL tools, CAN logs, and vehicle tests with integration engineers. 
• Support program timing, cost targets, supplier deliverables, and APQP processes. 
• Lead technical discussions with suppliers and internal manufacturing teams. 

Location & Travel Expectations:

• This role will be based out of the Scout Motors location in Novi, Michigan or Charlotte, NC. 
• This role requires daily attendance in the office, with regular in-person meetings and events. 
• Applicants should expect that the role will require the ability to convene with Scout colleagues in person and travel to participate in events on behalf of the company from time to time.

What you’ll bring 

We expect all Scout employees to have integrity, curiosity, resourcefulness, and strive to exhibit a positive attitude, as well as a growth mindset. You’ll be comfortable with change and flexible in a fast-paced, high-growth environment. You’ll take a collaborative approach to achieve ambitious goals. Here's what else you'll bring: 

• Bachelor’s or master’s degree in Engineering 
• 4+ years of experience in concept engineering or serial development, specifically with focus on air suspension systems. 
• Experience in CAD tools, packaging of chassis components and experience in part design (incl. requirements management, system integration, manufacturing and assembly processes). 
• Advanced project steering and coordination skills to practice independent project management for a defined chassis part scope. 
• Motivated engineer, wanting to work at the cutting edge of vehicle technical design, create new ideas and solutions, enjoying hands-on testing. 
• Strong interpersonal skills including ownership, self-motivated, problem solving, analytical, team player, innovative, creative, communication skills and ability to develop & mutually thrive in working relationships. 
• Proven ability to work in a cross-functional environment. 
• Minimum of High School Diploma, GED or equivalent required for all roles at Scout Motors, Inc.

What you'll gain

The benefits of joining Scout include the chance to build products and a company from the ground up.  This is a chance to create something new and lasting – with an iconic brand at its foundation.  In addition, Scout provides competitive compensation and benefits to support your physical, mental, and financial wellbeing. Program specifics are detailed in company policies and employee benefit guides, select highlights:

• Competitive insurance including:
  • Medical, dental, vision and income protection plans
• 401(k) program with:
  • An employer match and immediate vesting
• Generous Paid Time Off including:
  • 20 days planned PTO, as accrued
  • 40 hours of unplanned PTO and 14 company or floating holidays, annually
  • Up to 16 weeks of paid parental leave for biological and adoptive parents of all genders
  • Paid leave for circumstances related to bereavement, jury duty, voting time, or military leave

Pay Transparency

This is a full-time, exempt position eligible to receive a base salary and to participate in an annual performance bonus program. Final salary offered will be determined based on factors including but not limited to the candidate's skills and experience. The annual performance bonus program is preset and not candidate dependent.

Initial base salary range = $110,000.00 - $135,000.00

Internal leveling code: IC9

Overview

As an Engineer, Side Door Window Mechanisms & Glass, you will be involved in the “cradle to grave” approach to design & development. Expected to create concept design for novel solutions to current and new opportunities. Lead analysis of concept and final product, testing and launch, commercial and timing activities, and work with studio, manufacturing team and purchasing.

What you’ll do

Become part of an iconic brand that is set to revolutionize the electric pick-up truck & rugged SUV marketplace by achieving the following:

• Lead conceptual studies to solve unique problems in unique ways.
• Generate solution: concepts in ‘napkin sketch’ - fully analyzed physical prototypes - released and launched parts.
• Lead collaborative development of components and systems including interface with body engineering, manufacturing, studio design, quality, and customer experience teams.
• Perform kinematic and structural analysis to optimize designs.
• Responsible for component release for components and systems throughout program lifecycle, including concept design, supplier engagement, BOM management, systems requirements, simulation analysis, prototyping builds, validation testing, and production support.
• Work with the manufacturing team to develop the assembly process and find solutions to manufacturing issues.
• Manage cost and weight for components and systems from initial engineering estimates, through supplier quotes. Ensuring accurate forecasting and implementation plans throughout the development.
• Developing and managing your system, subsystem, and component part information.
• Be a champion of 1st principles design methodology in the body closures systems and across the entire vehicle.
• Engage in debate and represent the department as a stakeholder during design reviews.
• Mentor and help develop other less experienced engineers.
• Coordinate supplier meetings, track, investigate and resolve issues related to design.

Location & Travel Expectations:

• This role will be based out of the Scout Motors location in Novi, Michigan, or Charlotte, NC.
• This role requires 4 days per week in the office, with regular in-person meetings and events. 
• Applicants should expect that the role will require the ability to convene with Scout colleagues in person and travel to participate in events on behalf of the company from time to time.

What you’ll bring 

We expect all Scout employees to have integrity, curiosity, resourcefulness, and strive to exhibit a positive attitude, as well as a growth mindset. You’ll be comfortable with change and flexible in a fast-paced, high-growth environment. You’ll take a collaborative approach to achieve ambitious goals. Here's what else you'll bring: 

• Bachelor of Science in an engineering discipline (master’s degree and significant experience is a plus)
• 5-10 + years’ experience in Body Closures development or equivalent industry experience.
• Strong written and verbal communication skills
• Understanding of product requirements and closures features to deliver world class customer experience in one or more of the following areas:
  • Window Regulators
  • Power motors and Electrical/Software Interfaces
  • Automotive Glass
  • Glass Sealing – Weatherstrip
  • Door Sheetmetal
  • Closures mechanisms
• Strong understanding of 1st principal physics of a closures system –loads, forces, and overall function of the system, and tradeoffs among design, package, function, and customer experience involved with these systems.
• Ability to self-direct, self-managing issues to closure involving all necessary teams, and adapt quickly to program changes.
• Strong desire to create unique methods for analysis using tools available.
• CAD design experience for closures systems or related vehicle components. Catia V5 and/or 3DX experience preferred but not required.
• Advanced use of tools for analyzing structural performance, motion forces, kinematic performance, manufacturing options with rapid iterations.
• Knowledge of an automotive design and development process, system requirements, and general engineering best practices.
• Ability to deliver under pressure and manage component design & development within cost, weight, and timing constraints.

What you'll gain

The benefits of joining Scout include the chance to build products and a company from the ground up.  This is a chance to create something new and lasting – with an iconic brand at its foundation.  In addition, Scout provides competitive compensation and benefits to support your physical, mental, and financial wellbeing. Program specifics are detailed in company policies and employee benefit guides, select highlights:

• Competitive insurance including:
  • Medical, dental, vision and income protection plans
• 401(k) program with:
  • An employer match and immediate vesting
• Generous Paid Time Off including:
  • 20 days planned PTO, as accrued
  • 40 hours of unplanned PTO and 14 company or floating holidays, annually
  • Up to 16 weeks of paid parental leave for biological and adoptive parents of all genders
  • Paid leave for circumstances related to bereavement, jury duty, voting time, or military leave

Pay Transparency

This is a full-time, exempt position eligible to receive a base salary and to participate in an annual performance bonus program. Final salary offered will be determined based on factors including but not limited to the candidate's skills and experience. The annual performance bonus program is preset and not candidate dependent.

Initial base salary range = $110,000.00 - $135,000.00

Internal leveling code: IC9

Overview

As a Mechanism side &Front closure engineer, you will be involved in the “cradle to grave” approach to design & development.  Expected to create concept design for novel solutions to current and new opportunities. Lead analysis of concept and final product, testing & launch, commercial & timing activities, and work with studio, manufacturing team and purchasing. 

What you’ll do

Become part of an iconic brand that is set to revolutionize the electric pick-up truck & rugged SUV marketplace by achieving the following:

• Lead conceptual studies to solve unique problems in unique ways.
• Generate solution: concepts in ‘napkin sketch’ - fully analyzed physical prototypes - released and launched parts.
• Lead collaborative development of components and systems including interface with body engineering, manufacturing, studio design, quality, and customer experience teams.
• Perform kinematic and structural analysis to optimize designs.
• Responsible for component release for components and systems throughout program lifecycle, including concept design, supplier engagement, BOM management, systems requirements, simulation analysis, prototyping builds, validation testing, and production support. 
• Work with manufacturing team to develop assembly process and find solutions to manufacturing issues.
• Manage cost and weight for components and systems from initial engineering estimates, through supplier quotes. Ensuring accurate forecasting and implementation plans throughout the development. 
• Developing and managing your system, subsystem, and component part information. 
• Be a champion of 1^st principles design methodology in the body closures systems and across the entire vehicle. 
• Engage in debate and represent the department as a stakeholder during design reviews. 
• Mentor and help develop other less experienced engineers. 
• Coordinate supplier meetings, track, investigate and resolve issues related to design. 

Location & Travel Expectations:

• This role will be based out of the Scout Motors location in Novi, Michigan. 
• This role requires 4-5 days per week in the office, with regular in-person meetings and events. 
• Applicants should expect that the role will require the ability to convene with Scout colleagues in person and travel to participate in events on behalf of the company from time to time.

What you’ll bring 

We expect all Scout employees to have integrity, curiosity, resourcefulness, and strive to exhibit a positive attitude, as well as a growth mindset. You’ll be comfortable with change and flexible in a fast-paced, high-growth environment. You’ll take a collaborative approach to achieve ambitious goals. Here's what else you'll bring: 

• Bachelor of Science in an engineering discipline (Master’s degree and significant experience is a plus) and 5-10+ years’ experience in Body Closures development or equivalent industry experience. 
• Understanding of product requirements and closures features to deliver world class customer experience in one or more of the following areas:
• Handles
• Latches
• Dampers
• Load Reduction Assist Mechanisms 
• Window Regulators 
• Power Actuators 
• Charge Port Door Mechanisms
• Latching System – Front, Rear 

• Strong understanding of 1^st principal physics of a closures system –loads, forces, and overall function of the system, and tradeoffs among design, package, function, and customer experience involved with these systems. 
• Ability to self-direct, self-managing issues to closure involving all necessary teams, and adapt quickly to program changes. 
• Strong desire to create unique methods for analysis using tools available.
• CAD design experience for closures systems or related vehicle components. Catia V5 experience preferred but not required. 
• Advanced use of tools for analyzing structural performance, motion forces, kinematic performance, manufacturing options with rapid iterations.
• Knowledge of an automotive design and development process, system requirements, and general engineering best practices.
• Good interpersonal and communication skills with a high level of integrity.
• Ability to deliver under pressure and manage component design & development within cost, weight, and timing constraints. 
• Willingness to travel to suppliers, manufacturing, and testing facilities as required throughout product development. 
• Minimum of High School Diploma, GED or equivalent required for all roles at Scout Motors, Inc.

What you'll gain

The benefits of joining Scout include the chance to build products and a company from the ground up.  This is a chance to create something new and lasting – with an iconic brand at its foundation.  In addition, Scout provides competitive compensation and benefits to support your physical, mental, and financial wellbeing. Program specifics are detailed in company policies and employee benefit guides, select highlights:

• Competitive insurance including:
  • Medical, dental, vision and income protection plans
• 401(k) program with:
  • An employer match and immediate vesting
• Generous Paid Time Off including:
  • 20 days planned PTO, as accrued
  • 40 hours of unplanned PTO and 14 company or floating holidays, annually
  • Up to 16 weeks of paid parental leave for biological and adoptive parents of all genders
  • Paid leave for circumstances related to bereavement, jury duty, voting time, or military leave

Pay Transparency

This is a full-time, exempt position eligible to receive a base salary and to participate in an annual performance bonus program. Final salary offered will be determined based on factors including but not limited to the candidate's skills and experience. The annual performance bonus program is preset and not candidate dependent.

Initial base salary range = $130,000.00 - $160,000.00

Internal leveling code: IC8

What you’ll do

Become part of an iconic brand that is set to revolutionize the electric pick-up truck & rugged SUV marketplace by achieving the following:

• Responsible for system engineering for the front drive unit, front drive unit assembly and the front and rear drive unit NVH cover for the Scout Traveler SUV and Terra pickup. 
• Coordinate component designs, builds and testing to meet both Scout and supplier milestones. 
• Identify risks and escalate to leadership where appropriate to raise awareness and drive action. 
• Track and report drive unit imperatives including system cost, mass, and investment. 
• Effectively coordinate hardware, software and calibration for all phases from prototype development to production. 
• Provide technical feedback to concept architects, designers, test engineers and calibration teams. 
• Act as the drive unit single point contact for various partners and suppliers. 

Location & Travel Expectations:

• This role will be based out of the Scout Motors location in Novi, Michigan. 
• This role requires 4-5 days per week in the office, with regular in-person meetings and events. 
• Applicants should expect that the role will require the ability to convene with Scout colleagues in person and travel to participate in events on behalf of the company from time to time.

What you’ll bring 

We expect all Scout employees to have integrity, curiosity, resourcefulness, and strive to exhibit a positive attitude, as well as a growth mindset. You’ll be comfortable with change and flexible in a fast-paced, high-growth environment. You’ll take a collaborative approach to achieve ambitious goals. Here's what else you'll bring: 

• Bachelor’s degree in Engineering or Engineering Technology. (required) 
• Strong Powertrain technical fundamentals.  (required) 
• 7+ years of experience managing complex multi-disciplinary engineering projects, with evidence of success bringing programs to life from concept to production (required) 
• Experience with common project/ program management tools. (required) 
• Proven ability to work in a cross-functional environment with colleagues from purchasing, manufacturing, etc. (required) 
• Strong interpersonal skills including accountability, self-motivation, problem solving, analytical thinking, succinct communication and ability to develop & mutually thrive in working relationships. (required) 
• Experience with design release of Powertrain components and systems. (preferred) 

What you'll gain

The benefits of joining Scout include the chance to build products and a company from the ground up.  This is a chance to create something new and lasting – with an iconic brand at its foundation.  In addition, Scout provides competitive compensation and benefits to support your physical, mental, and financial wellbeing. Program specifics are detailed in company policies and employee benefit guides, select highlights:

• Competitive insurance including:
  • Medical, dental, vision and income protection plans
• 401(k) program with:
  • An employer match and immediate vesting
• Generous Paid Time Off including:
  • 20 days planned PTO, as accrued
  • 40 hours of unplanned PTO and 14 company or floating holidays, annually
  • Up to 16 weeks of paid parental leave for biological and adoptive parents of all genders
  • Paid leave for circumstances related to bereavement, jury duty, voting time, or military leave

Pay Transparency

This is a full-time, exempt position eligible to receive a base salary and to participate in an annual performance bonus program. Final salary offered will be determined based on factors including but not limited to the candidate's skills and experience. The annual performance bonus program is preset and not candidate dependent.

Initial Base Salary Range: $110,000.00 - $135,000.00

Internal Leveling Code: IC9

Job Description:

• As a Electronics Resident Engineer, you will provide critical on-site hardware and electronics support at General Motors Tech Centers and Assembly Plants, particularly during launch phases.
• You will act as the vital supporting link between the Client Team and the GM Team to help design, develop, and successfully launch products.
• In this role, you will apply hands-on electronics expertise to test, diagnose, and validate automotive embedded systems while delivering high-quality service and representing the company at the customer site.

Requirements / Hardware & Electronics Engineering Contributions:

• Schematics & Circuitry: Read, interpret, and analyze complex electrical schematics to understand electronics design basics and trace circuits for diagnostic purposes.
• Lab Equipment Utilization: Operate standard electronics laboratory equipment, heavily utilizing Oscilloscopes, Multimeters, and Logic Analyzers to capture waveforms, verify signal integrity, and take precise electrical measurements during issue replication.
• PCBA Testing & Programming: Utilize JTAG debuggers to interface directly with microcontrollers for testing, debugging, and programming Printed Circuit Board Assemblies (PCBAs) at the bench level.
• Hardware Prototyping & Rework: Apply practical, hands-on experience to solder and rework Surface Mount Technology (SMT) components on automotive circuit boards.
• Embedded System Validation: Execute system validation tasks by developing a clear understanding of system bench setups and translating vehicle test cases against hardware system requirements.
• In-Vehicle & Bench Troubleshooting: Troubleshoot hardware and communication issues directly on the customer's test bench and in-vehicle. This includes actively reflashing Automotive Embedded Electronic Control Units (ECUs) with updated software or calibration files as needed.
• Root Cause Analysis: Serve as an active participant in technical problem-solving utilizing methodologies like QRQC (Quick Response Quality Control) to identify hardware failures at the component or system level.

Resident Engineering & Project Support:

• Release assigned electronics parts into the General Motor using their specific ECM process.
• Order parts to support build events and ensure the timely closure of all hardware-related ECRs and work orders.
• Co-facilitate subsystem/component Product Development Team (PDT) meetings, speaking clearly with facts and data regarding hardware performance.
• Track and maintain the delivery matrix of Bench parts, Mule Build Parts, Software, and Calibration files.
• Support the vehicle build process and sign-off activities for all prototypes and manufacturing builds (Virtual, Mule, Structural, Integration, Pre-Production, and Production).

Education & Experience:

• Bachelor's Degree in Electronics, Electrical or Computer Science.
• Entry-level experience, with an automotive internship, system validation experience, or customer service experience strongly preferred.
• Previous experience working with an automotive company is a plus.

Hardware & Electronics Skillset:

• Embedded Systems: Hands-on experience or strong academic familiarity with automotive embedded ECUs and PCBA architecture.
• Automotive Networks: Solid understanding of vehicle network architectures, specifically CAN Bus Serial communications and Automotive Ethernet communication protocols.
• Hardware Tools: Proven ability to use JTAG debuggers, oscilloscopes, multimeters, and logic analyzers.
• General Tech Skills: Proficiency in the Microsoft Office suite (Word, Excel, PowerPoint). Programming knowledge in Google Scripts and VBA is considered a strong plus for data automation.

Key Competences:

• Customer-Centric: Focus on the customer, act as a self-starter, and represent the company technically with superior customer service.
• Continuous Learner: Eagerness to build deep system and product hardware knowledge while maintaining an agile behavior.
• Analytical: Strong problem-solving skills with the ability to convey complex hardware technical information effectively to both engineering and management teams.

Job Description:

• The Process Engineering Supervisor is responsible for supervising salaried bargaining unit process engineers in the development of process tooling for trim, chassis, and final operations from vehicle design concept through in plant vehicle launch.
• Champion data driven decisions.
• Manage complex projects from beginning to end and meet project budget and timing targets.
• Manage issues and drive root cause analysis, utilizing tools such as Fishbone diagrams, 5 why's, FMEAs, Pareto Charts, Histograms, Six Sigma, and Red X.
• The Process Engineer Supervisor also directs design for manufacturing concepts throughout all projects big or small and works to develop a solid team atmosphere empowering direct report to take ownership of their processes.
• The successful candidate must have the ability to communicate effectively with all levels of management. Extensive travel may be required.

Basic Qualifications:

• Bachelor's degree in engineering or related technical discipline
• 5+ years of experience related to automotive assembly technology supervision * Knowledge of CAN software
• Good written and communication skills
• Good computer skills with proficiency in Microsoft Office Excel, PowerPoint, Word and Google Suite
• Good project management/problem solving skills
• Self-directed and willing to work any shift and overtime as required
• Willing to travel both domestically and internationally as required
• Ability to work overtime as needed including nights and weekends and travel domestically/internationally as required

Preferred Qualifications:

• Bachelor's degree in electrical engineering or automotive technology
• Strong leadership/problem solving skills
• 5+ years of supervision experience in automotive manufacturing assembly
• Demonstrated experience in Focused Problem Solving (Kaizen methodology)
• Experience in electrical and/or torque strongly desired
• Experience working with vehicle CAN and CAN-FD networks and diagnostic tools

Note: Due to the nature of the work, only US Persons (citizens or permanent residents) need apply for this position.

Active participation in customer design reviews to define requirements in terms of engineering metrics, address design solutions and mechanical design requirements to implement changes that improve product and interfaces and ensure a robust product design.

Define and create the documents needed for production and get them released through proper approval process, to reach a proper program launch. Establish physical and functional integration of plastics components of the interior trim of the vehicles through all phases of the program. Translate functional objectives into technical requirements and mechanical solutions. Create and analyze alternative design concepts packaging and integrating mechanical systems, mechanical components and benchmarking of competitive vehicles. Review 3D CAD with Tool shops to communicate any feasibility concern of the plastic substrates. Review SLA’s and 3D CAD models with Designers and prototype laboratory to ensure the wrapping feasibility of the substrates. Review DFMEA (Design Failure Mode Effects and Analysis) document with Quality Engineers to create a plan to reduce products risks (RPN’s). Review OKTT CAD and production substrates with Process Engineers to develop proper tools and fixtures for testing and different assembly operations of the End item. Support Cross functional team to ensure the completion of all the stages of the program prior to launch (Management, Production, Purchasing, Quality, etc.)

Requirements:  Bachelor’s Degree in Mechanical Engineering or Automotive Engineering with 6 months experience. 40 hr/wk, $ 77,792/yr.  Send resumes to:  Alten Technology USA Inc, 3221 W Big Beaver Road, Ste: 116, Troy, MI 48084, or email to: altentalentacquisition@alten.us.com.Please use the reference number in the title of the email: Ref. L-2607. 

Job Description:

• A Client Design Release Engineer (Interior/Cockpit) is an engineering professional responsible for the design, development, and production release of interior vehicle components like the cockpit, ensuring they meet performance, quality, safety, and cost requirements throughout the product lifecycle.
• This role involves collaborating with internal teams and external suppliers to manage design feasibility, technical specifications, validation testing, risk assessment (DFMEA), and production processes, ultimately ensuring a successful and robust interior design is integrated into the final vehicle. 

Key Responsibilities:

• Design & Development: Drive the design and development of interior and cockpit components from concept through production release. 
• Supplier Collaboration: Work closely with suppliers on design feasibility, manufacturability, cost, and adherence to engineering standards. 
• Technical Leadership: Provide technical guidance and support to resolve design issues, material selection challenges, and process problems. 
• Validation & Testing: Develop and implement validation testing strategies, including component, vehicle, and durability testing, to ensure components meet performance metrics. 
• Risk Management: Lead risk assessment activities, such as Design Failure Mode and Effects Analysis (DFMEA), to ensure design robustness and mitigate potential issues. 
• Documentation: Generate and manage technical documentation, including system and sub-system technical specifications. 
• Cross-Functional Integration: Partner with manufacturing, quality, testing, and vehicle integration teams to ensure seamless implementation and integration of interior designs. 

Required Skills & Qualifications:

• Education: Bachelor of Science degree in Mechanical Engineering or a related field is typically required. 
• Experience: 3-5 years of relevant experience in design/development engineering, particularly in Body, Chassis, or Interior Systems. 
• Technical Proficiency: Experience with computer-aided design (CAD) tools, design validation processes (DVP), and failure mode analysis (DFMEA).Proficiency in plastic injection molding and trim assembly processes, Knowledge of ergonomic design and HMI integration, CAD expertise for packaging and design, Understanding of safety and regulatory requirements, Experience with fit & finish and perceived quality optimization.
• Soft Skills:Strong communication, leadership, problem-solving, organizational, and detail-oriented skills are essential. 
• Collaboration: Demonstrated ability to work effectively in a team environment and interface professionally with cross-functional teams and management. 

• Create written and illustrated manufacturing instructions, bills of material and outside purchase specifications per engineering drawings/specifications.
• Develop and improve manufacturing processes and tooling for composite parts
• Work with production teams to ensure manufacturability and suggest improvements.
• Train production staff in new processes and techniques.
• Providing manufacturing support to design throughout conceptual, preliminary, and detailed design phases, to include validation, customer approval, manufacturing, and operational service.
• Support design with material selection based on usability and compatibility with current processes and equipment.
• Review and disposition nonconforming material to technical requirements.
• Develop and validate repair processes in conjunction with design team.
• Contribute to Cost of Poor Quality efforts, challenge existing processes, and drive improvements.
• Ensure compliance with established engineering methodologies
• Use sound engineering judgment, technical expertise, and data analysis to make decisions or solve moderately complex tasks or problems.

• A Science, Technology, Engineering or Mathematics (STEM) University Degree or equivalent experience and minimum 10 years prior relevant experience
• A Science, Technology, Engineering or Mathematics (STEM) Advanced Degree in a related field and minimum 8 years experience
• Effective problem identification and solution skills
• Strong project ownership, execution, and proactive mentalities
• Experience with mechanical manufacturing processes (machining, joints, fasteners, welding) in relevant industry positions (aerospace, defense, automotive or similar)
• Experience with GD&T and print interpretation.
• Experience with fiber-reinforced polymer composites, specifically: fiberglass, aramid, and/or carbon prepreg and wet layup (especially epoxy resin systems)
• Experience in advanced Composite and Bonded Structures manufacturing (ie. Fiber Reinforcement, Curing, Ovens and Autoclaves, Adhesives, Surface Preparation, etc.) 

• Computer Aided Design Software experience: Creo / Windchill (Preferred) or NX / FiberSIM / TeamCenter
• Familiarity with Non-Destructive Testing (NDT) techniques, such as ultrasonic testing, eddy current, FPI, camera optics, X-ray and others used in aerospace.
• Experience with design for manufacturing & assembly
• Understanding of manufacturing cost and reproducibility
• Experience with implementation of PFMEAs

We are excited to announce an opening for the Project Engineer position! In this role, you will be a vital part of our project team, leading design aspects, maintaining project budgets and schedules, and providing your technical expertise. You’ll have the opportunity to train and mentor project teams on all projects, including those that are more complex and larger in scale. Additionally, you will tackle engineering issues for various land development projects. We’re looking for someone who can develop and demonstrate proficiency in the essential functions of the job outlined below.

As a Project Engineer, you will:
- Direct the project team on various assignments as guided by the Project Manager, offering technical training and support.
- Recommend and implement design changes such as grading, utility sizing, and other modifications as requested by clients.
- Collaborate with project team members and clients to prepare project proposals.
- Draft, review, and finalize preliminary and final site plans, documents, and computations, which include preparing reports, opinions, and recommendations for the Project Manager regarding project direction; hydrology/hydraulic studies, due diligence/site analysis reports, engineer's opinion of probable costs, project schedules, utility computations, detention/retention computations, storm sewer reports, local and state permit applications, storm water reports, soils reports, earthwork volume calculations, StormCAD reports, WaterCAD reports, and preliminary grading.
- Complete edits and modify plans as reviewed by agencies, municipalities, and clients as directed.
- Research local/state requirements on properties and projects for zoning, and conduct site visits and field assignments as needed.
- Review project survey data to analyze existing site conditions and factors for development, including legal descriptions, ALT A surveys, easement documents, and condo documents.
- Provide construction-related services and guide junior team members in completing tasks such as permit applications, cut sheets, quantity estimates, and transmittals; organize site plans, construction plans, construction sheet set-up and assembly, and other related construction documents.
- Review permit applications, quantity and cost estimates, and transmittals, resolve construction issues, and serve as field engineer during construction.
- Support Atwell's training and development programs by providing specialized training and/or mentoring in your area of expertise, preparing and/or reviewing technical training materials, and serving as a technical discipline/subject matter expert.
- Utilize AutoCAD Civil 3D and related engineering software packages to complete assignments on time and within the standards outlined in the Atwell Product Quality Manual.
- Initiate communication with clients, municipalities, and agencies as required by the project in accordance with the Project Manager.
- Keep the Project Manager and Team Leader updated on workload status.
- Apply fundamental engineering concepts to practical situations and manage your workload effectively.

Additional certifications or licenses held are a plus!
Strong written and verbal communication skills are essential.
Project Engineer
- Provide support and participate in litigation matters by offering expert witness testimony as directed.
- Respond to review letters and modify plans from agencies, municipalities, and clients as directed.

Education
Bachelor's Degree in Civil Engineering is required.
PE License is required.

Experience
We’re looking for candidates with four (4) or more years of experience.
Experience with various reports associated with projects such as soil, storm water, storm sewer, FEMA, environmental, traffic, wetlands, lease agreements, easements, covenants and restrictions, purchase agreements, annexation agreements, water flow test reports, etc.
Experience leading to knowledge of the local construction market and contacts is preferred.
Advanced knowledge of designing land development projects is a must.
Experience managing and mentoring other employees is highly valued.

Proficiency in your group’s understanding and application of the following technical skills:
- AutoCAD Civil 3D
- Grading Design
- Hydraulics
- Hydrology
-- Site Planning
- Soil Erosion
- Pump Station Design
- Sanitary (Septic) Design
- Sanitary (Sewer) Design
- Storm Water Operator
- Storm Water Management Design
- Earthworks
- Plan Interpretation
- Preliminary Grading
- Storm Sewer
- Storm Water Detention
- Water Main Design
- Well Water Design

• Execute the design, analysis, or evaluation of project assemblies using sound engineering principles and adhering to industry standards, practices, procedures, and product / program requirements.
• Function as a design/structures engineer for hybrid composite-metallic components used in engine testing stands.
• Providing design support throughout conceptual, preliminary, detailed design phases, to include validation, customer approval, manufacturing, and operational service.
• Responsible for material selection, determination of laminate architecture, generation of detail/assembly-level CAD models, and design of sub-element components.  May also include designing to a given surface.
• Assist in manufacturing process development with the engineering team and ensure the manufacturability of component designs, documenting and presenting results to management and external customers.  Assist shop floor personnel when needed.
• Review and disposition nonconforming material to technical requirements.
• Develop and validate repair processes in conjunction with manufacturing team.
• Support vendor management through reviews of quotes and requests for modifications of technical requirements.
• Contribute to Cost of Poor Quality efforts, challenge existing processes, and drive improvements.
• Ensure compliance with established engineering methodologies
• Use sound engineering judgment, technical expertise, and data analysis to make decisions or solve moderately complex tasks or problems.
• Provide engineering / technical support in a production environment

• A Science, Technology, Engineering or Mathematics (STEM) University Degree or equivalent experience and minimum 10 years prior relevant experience
• An Science, Technology, Engineering or Mathematics (STEM) Advanced Degree in a related field and minimum 8 years experience
• Effective problem identification and solution skills
• Strong project ownership, execution, and proactive mentalities
• Experience developing technical ideas with internal/external customers and a track record of converting ideas to programs
• Experience with mechanical and composite design (machining, joints, fasteners, welding) in relevant industry positions (aerospace, defense, automotive or similar)
• Experience with GD&T to include determining tolerance requirements.

• Advanced Degree in Engineering
• Computer Aided Design Software experience: Creo / Windchill (Preferred) or NX / FiberSIM / TeamCenter
• Computer Aided Engineering software experience 
• Experience with composite design, analysis, and manufacturing.
• Familiarity with Non-Destructive Testing (NDT) techniques, such as ultrasonic testing, eddy current, FPI, camera optics, X-ray and others used in aerospace.
• Experience with design for manufacturing & assembly
• Understanding of manufacturing cost and reproducibility
• Familiarity with principles of product development, reliability and quality control
• Experience with configuration management.
• Experience with fiber-reinforced polymer composites, specifically: fiberglass, aramid, and/or carbon prepreg and wet layup (especially epoxy resin systems)
• Experience in advanced Composite and Bonded Structures design and manufacturing(ie. Organic/Polymer Matrix Composites, Fiber Reinforcement, Manufacturing methods, Adhesives, Surface Preparation, etc.) 

Position Summary

• Client is looking for a Warranty Hub Housing Troubleshooting Engineers to support warranty analysis and issue resolution using GIMS (Global Issue Management System).
• This role focuses on identifying, analyzing, and resolving housing-related warranty concerns, ensuring rapid containment and long-term corrective actions.
• The position sits at the intersection of warranty, quality, and engineering, making it ideal for junior-to-mid engineers looking to grow technical and analytical expertise within a global automotive OEM.

Key Responsibilities

• Monitor and analyze warranty claims and field data related to hub housing and associated components
• Use GIMS to track issues, document root cause investigations, and manage corrective actions
• Perform failure analysis and troubleshooting on returned parts and field reports
• Collaborate with design, manufacturing, quality, and supplier teams to identify root causes
• Support development and validation of containment, corrective, and preventive actions (CAPA)
• Prepare technical summaries, dashboards, and reports for management review
• Support plant visits, teardown activities, and supplier investigations as required

Required Qualifications

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Automotive Engineering, or similar discipline
• 1–4 years of experience in warranty, quality, manufacturing, or engineering support roles
• Basic understanding of automotive systems and components, particularly housings or structural parts
• Experience or exposure to warranty systems or issue tracking tools (GIMS preferred)
• Strong analytical and data interpretation skills

Preferred Qualifications

• Experience working with field/warranty data analysis
• Familiarity with RCA,  8D problem-solving methodologies
• Exposure to manufacturing processes (casting, machining, assembly)
• Understanding of supplier quality processes
• Automotive OEM or Tier 1 supplier experience

Key Competencies

• Structured problem-solving
• Attention to detail
• Technical curiosity and learning mindset
• Effective written and verbal communication
• Ability to work in a fast-paced, issue-driven environment

As a Survey Project Manager at Atwell, you will play a critical role in the success of our survey group and the execution of projects that vary in size, detail, and complexity. You will be equipped with a highly collaborative team of office and field staff, and the autonomy to manage projects from start to finish in an entrepreneurial-style environment. Our diverse project scopes in residential/commercial land development and renewable energy will allow you to cross-market and grow your skill set.

Responsibilities:

• Collaborate and lead a team responsible for drafting, reviewing, and finalizing preliminary and final site plans and construction documents.
• Review project survey data utilizing the latest technology and industry software.
• Analyze existing site conditions and factors to consider for development including but not limited to legal descriptions, ALTA surveys, easement documents, and condo documents.
• Plan, organize, and supervise survey crews, technicians, and office staff members.
• Provide oversight on large-scale ALTA surveys as they pertain to solar, or wind power generation preferred.
• Provide construction-related services and guide junior team members to complete items such as permit applications, cut sheets, quantity estimates, and transmittals; organize site plans, construction plans, construction sheet set-up and assembly and other related construction documents.
• Utilize AutoCAD Civil 3D and related engineering software packages to complete assignments on time and within prescribed standards and budgets.
• Attend paid training and development events, industry conferences, and networking opportunities.
• As a subject matter expert and mentor, you will assist with your staff's new hire training plan, career planning, and continuous professional development at Atwell.
• Take pride in rewarding and motivating your staff with spot bonuses and Peer Recognition Rewards

Qualifications:

• Professional Survey License (PLS, PSM)
• 8+ plus years of survey industry related work experience
• Ability to coach, mentor, and develop a growing team.
• Prior experience working with Trimble Business Center and AutoCAD Civil 3D preferred.
• The ideal Project Manager will have advanced understanding of; Boundary Surveys, ALTA Surveys, Construction Staking, Leveling, Traversing, GPS, Data Collections, Legal Descriptions, Plan interpretations, along with Real Estate Documents

#LI-WS1

Aurora hires talented people with diverse backgrounds who are ready to help build a transportation ecosystem that will make our roads safer, get crucial goods where they need to go, and make mobility more efficient and accessible for all.  

We’re searching for a Project Engineer. As a Project Engineer within the Hardware-Operations’ organization, you will lead the introduction of our autonomous vehicle at a contract upfitter during a critical period of rapid production ramp.  This multidisciplinary role requires a self-sufficient professional capable of integrating mechanical and electromechanical systems into a high-volume manufacturing environment.  You will serve as a vital technical bridge, frequently coordinating with Technical Program Management, Supply Chain, Quality Assurance, and Production teams, both internally and externally, to ensure design intent is understood and operationally executed at scale.

This role is based on-site in Livonia (Detroit Metro) with occasional travel to Pittsburgh.

In this role you will

• Coordinate the manufacturing launch of new/revised products including establishing goals, training team members and evaluating results
• Monitor and enforce timelines, quality, and output ensuring that supplier facilities and deliverables are meeting Aurora's timelines, expectations, and requirements
• Communicate clearly, both verbally and in writing; make progress reports and present findings.
• Guide supplier-related projects relative to products, policies, and continuous improvement
• Conduct multidisciplinary rapid problem-solving activities and propose solutions to both prototype and production manufacturing challenges, such as Design for Excellence (DfX) input, e.g., Design for Manufacturing/Assembly (DfMA), Design for Service/Repair/Maintenance (DfS/R/M)

Required qualifications

• Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 3 years of prior relevant experience;
• Or, Advanced Degree in a related field and a minimum of 2 years’ experience.
• Or, 12 years of prior relevant experience in lieu of a degree

Desirable qualifications

• Strong communication skills and ability to influence and coordinate with external vendors, contractors, and inside stakeholders and engineers
• Experience with IATF 16949:2016 Automotive Quality Management Systems or similar, e.g., AS9100D:2016; ISO 13485:2016; ISO 9001:2015
• Green Belt certification or demonstrated experience using Lean / Six Sigma tools and similar methodologies, e.g., DMAIC, 8D, PDCA, QRQC, 4A.
• Experience interpreting technical requirements
• Experience leading Root Cause Corrective Action (RCCA)
• Experience with advanced CAD, PLM, ERP, and MES software suites

The base salary range for this position is $112,000-$180,000 per year. Aurora’s pay ranges are determined by role, level, and location. Within the range, the successful candidate’s starting base pay will be determined based on factors including job-related skills, experience, qualifications, relevant education or training, and market conditions. These ranges may be modified in the future. The successful candidate will also be eligible for an annual bonus, equity compensation, and benefits.

#LI-JH1

#Associate 

Note: Due to the nature of the work, only US Persons (citizens or permanent residents) need apply for this position.

Design material flow processes and storage systems to establish efficient material delivery to the factory and sub-assembly lines for electric vehicle automotive components. Interface with Manufacturing Engineering, Packaging, Logistics Operations, EH&S during launch to develop Material Flow processes and systems. Identify and implement continuous improvement projects. Complete dock utilization analysis, support dynamic simulations, maintain PFEP data, calculate storage space requirements and design material delivery routes. Input and report out KPI data on a weekly basis. Develop business cases as needed for Material Flow installations. Contribute to internal document development, standards, best practices, lessons learned and training modules. Develop requirements for Material Flow equipment: fork trucks, tuggers, dollies, and lineside display. Develop station layouts for lineside operations, offline SPD cells, kitting, and repack activities. General Optimization of floor space, logistics, delivery, and display equipment in the assembly plant. Prioritize Material Flow Layout Engineer activities. Coordinate Layout Engineer and Equipment design staff activities. Experience with installation of material handling equipment such as Rack indexers, turn tables, over/under shuttles, and conveyors. New launch projects on specific production lines focusing on material flow from warehouse to the border of line location. Set up of new part numbers and engineering changes. Creation of station designs from scratch, in base of production rate and according assembly processes.

Requirements:  Bachelor’s Degree in Industrial Engineering, Mechanical Engineering, or Automotive Engineering with 6 months experience, 40 hr/wk, $78,666/yr. Send resumes to:  Alten Technology USA Inc, 3221 W Big Beaver Road, Ste: 116, Troy, MI-48084, or email to: altentalentacquisition@alten.us.com.  Please use the reference number in the title of the email: Ref. M-2531.

About Us

Ever wonder how new vehicles get to their final destination? Behind the scenes, there's a fascinating process called new vehicle processing. In the automotive industry, professionals like our team at Precision Vehicle Holdings are responsible for seamlessly moving freshly minted vehicles from the factory floor. Once the vehicles roll off the assembly line, the process swings into action, orchestrating their journey to the final destination, whether by road or rail.

But it's not just about transportation. Our role extends to ensuring that every vehicle meets the highest quality standards. From rigorous inspections to post-production modifications, maintenance, and pre-delivery inspections, we handle it all with precision and care.

Backed by a powerhouse of support from departments like Administration, Finance, Maintenance, People Services, Operations, and more, we ensure every new vehicle journey is seamless.

Explore our diverse range of career options across different departments and locations and join us in driving the future of new vehicle processing – apply today!

Who We’re Looking For

We are always looking for talented individuals to join our team in various operational, administrative, and technical roles. If you are passionate about automotive logistics, safety, and operations, and have experience in any of the above areas, we’d love to hear from you. Whether you’re an experienced operations professional, a skilled driver, or an expert in IT or business development, we want to keep you in mind for future opportunities as they arise.

How to Apply

Submit your application and resume outlining your area of interest and skills. We will keep your information on file and reach out if a suitable role becomes available.

Senior Mechanical Engineer

Position Overview: The Senior Mechanical Engineer will work together with team members at Axis, including Project Managers, Controls Engineers, Machine Builders, Machining / Fabrication specialists and other Mechanical Engineers to conceptualize, design, test and validate automation systems. Must have engineering knowledge related to automation systems and be able to interpret engineering drawings, machine and part data. Requires knowledge of controls systems, manufacturing processes and procedures, with direct experience in automation systems and/or robotic equipment.

Responsibilities: 

• Develop and fully design equipment, layouts and subassemblies of automated robotic work cells in SolidWorks CAD.
• Manage and lead assigned projects and direct project teams.
• Interpret GD&T and Datum requirements for tooling designs.
• Ensure that equipment is designed to customer and/or Axis Automation build specifications using standard techniques and approach.
• Ensure equipment meets industry safety guidelines.
• Lead mechanical design presentations and reviews with internal team, customers and suppliers.
• Consult with Process/Cost Engineers.
• Review CAD data levels and revisions that are presented in customer parts.
• Designs with NAAMS standard components.
• Manage and lead mid-scale projects and work with project teams.
• Real-time communication with company management and project teams on developments.
• Professional management of customer relationships and requests.
• Communicate with vendors to specify and source major purchased components.
• Ability to train and teach less experienced Mechanical Design Engineers and Co-Ops / Interns.
• Create and improve standards and procedures for the Mechanical Design department.
• Support build and assembly teams.

• Champion our Operating Principles: You will be expected to actively embody and uphold our ten operating principles, which guide our every action and decision at Axis Automation. These principles are key to our culture and success. 

Qualifications:

• Bachelor’s Degree in Mechanical Engineering preferred.
• 5+ years’ experience designing automated machinery required.
• Direct knowledge of automated assembly processes with a preference for welding experience.
• Comprehensive knowledge of Geometric Dimensioning and Tolerancing (GD&T).
• Proven experience developing comprehensive design packages.
• Strong understanding of controls systems, manufacturing processes, and robotic integration.
• Advanced proficiency in parametric 3D CAD software, SolidWorks preferred.
• Proficient with Microsoft Excel and Word.

Salary: $85,000 - $95,000

Benefits: Axis offers a comprehensive benefits package to our employees with immediate eligibility upon hire.

Controls Electrician
-Open Position -

Axis Automation leverages the teamwork of our leading engineers and machine builders to conceptualize, design, integrate, deploy and service factory automation systems for forward-thinking manufacturing customers. Our team has decades of automation experience, spanning hundreds of projects and thousands of automation configurations.

Position Title: Controls Electrician

Position Description: The Controls Electrician serves as a team member in the electrical assembly process for automation equipment and this electrician is responsible for panel building and wiring of electrical components used on automation equipment projects. Willing to train entry level candidate with electrical knowledge.
•Serves as a Controls Electrician team member in the electrical assembly process for automation equipment
•Assemble & wire electrical panels and machine wiring according to approved design and customer specifications.
•Ensure that changes and problems get documented and communicated.
•Communicate with the project team on open issues and progress during the build process.
•Assist with the successful execution of equipment builds including cost, quality, timing, and customer satisfaction.
•Effectively and safely troubleshoot wiring and circuits
•Read and understand schematics
•Problem solve issues / poke yokes / cycle time
•Travel for install and runoffs with customer
•Identify electrical problems, and recommend adjustments/repair work as necessary
•Work cross-functionally with all departments during all phases of the project including de-bug and runoff
•Champion Our Operating Principles: You will be expected to actively embody and uphold our ten Operating Principles, which guide our every action and decision at Axis Automation. These principles are key to our culture and success.

Education and Experience Requested:
•High school diploma or equivalent certificate

•Preferred two (2) years electrical experience with equipment building

•Team player, able to take direction and be self-directed

•High regard for safety standards

•Willingness to travel up to 20% (local, national, international)

Salary: $20.00 - $32.00/hour (Wage dependent on experience)

Additional Compensation: Overtime pay, travel pay

Benefits: Axis offers a comprehensive benefits package with no waiting period.

Lead Controls Electrician

Axis Automation leverages the teamwork of our leading engineers and machine builders to conceptualize, design, integrate, deploy and service factory automation systems for forward-thinking manufacturing customers. Our team has decades of automation experience, spanning hundreds of projects and thousands of automation configurations.

Position Title: Lead Controls Electrician

Position Description: The Lead Controls Electrician serves as a team member in the electrical assembly process for automation equipment. This electrician is responsible for panel building and wiring of electrical components used on automation equipment projects. 

Lead Responsibilities:
•Lead and guide electrical team members across multiple projects
•Monitor build progress to ensure timelines are met
•Act as the primary communicator for electrical status and open issues during the build process
•Support onboarding and mentoring of new team members
•Build and wire custom panels and systems per design and spec
•Interpret and follow electrical schematics and customer documentation
•Troubleshoot and resolve electrical issues efficiently and effectively.
•Document changes and communicate updates throughout the build process
•Support project success by focusing on quality, cost, and customer satisfaction
•Collaborate with cross-functional teams through all stages of the project

•Participate in on-site installations & Support

•Champion Our Operating Principles: You will be expected to actively embody and uphold our ten Operating Principles, which guide our every action and decision at Axis Automation. These principles are key to our culture and success.

Qualifications
•Minimum 4 years of hands-on experience wiring custom automated machinery
•Proven ability to lead and coordinate a team
•Strong troubleshooting and problem-solving skills
•High attention to safety and detail
•Comfortable reading schematics and working with complex mechanical systems
•Basic computer proficiency (Excel, Word, OneNote)
•Team player with strong communication and self-direction
•Willingness to travel up to 20% (local, national, international)

Salary: $32.00 - $40.00/hour (Wage based on Experience)

Additional Compensation: Overtime pay, travel pay

Benefits: Axis offers a comprehensive benefits package with no waiting period.