** This position is not eligible for visa sponsorship for external candidates. Candidates cannot require sponsorship now or in the future**

Job’s mission

Our Global Sales, Services & Spares IQ and Sustaining teams are seeking Snr Engineers I & II, Field Service (level will depend on experience, degree and responsibilities. Please review below) to join ASM at a customer site (TSMC) in North Valley, AZ. Domestic and International travel of at least 75% will be required for this role. As a Senior Field Service Engineer at ASM, you’ll play a critical role in supporting the advanced semiconductor equipment that powers the world’s most transformative technologies. You’ll take the lead on complex troubleshooting, guide and mentor engineers, and strengthen our partnerships by helping customers achieve stable, high‑performance fabrication environments. Your expertise will make a direct impact on tool reliability, customer satisfaction, and the next generation of ASM technology.

What you will be working on

Senior Engineer I, Field Service

• Install, maintain, and repair ASM semiconductor equipment with minimal supervision
  • Lead troubleshooting of complex tool or process issues using structured diagnostic methods
  • Perform root‑cause analysis and recommend targeted, data‑driven corrective actions
  • Review tool‑performance data to identify trends, risks, or improvement opportunities
  • Provide technical guidance and on‑the‑job coaching to less‑experienced engineers
  • Document service activities and support updates to procedures and best practices
  • Communicate solutions, progress, and expectations clearly with customer engineers
  • Participate in escalations alongside cross‑functional ASM engineering teams

Senior Engineer II, Field Service

• Serve as the senior technical lead for equipment installation, performance optimization, and recovery
• Diagnose and resolve highly complex, multi‑factor tool and process issues with limited guidance
• Lead advanced root‑cause analysis and drive long‑term corrective‑action plans that influence global engineering improvements
•  Own the customer‑technical relationship: build trust, anticipate operational needs, and act as ASM’s senior technical representative onsite
• Manage escalations end‑to‑end, aligning expectations, coordinating cross‑functional teams, and communicating clear action plans
• Guide, mentor, and develop engineers through hands‑on instruction, structured training, and knowledge‑sharing
• Champion best practices and contribute to procedure development, improvements, and field‑wide learning
•  Provide detailed field insights to R&D, product, and design teams, including support for beta tools or early‑option deployments

What we are looking for

Senior Engineer I, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 6+ years of experience, OR a Master’s degree with 4+ years of experience OR PhD degree with 0+ years of experience.
• Experience of semiconductor field service or capital‑equipment experience
• Ability to interpret electronic and electromechanical schematics
•  Experience with structured troubleshooting methodologies
• Knowledge of cleanroom and semiconductor safety protocols
• Strong written and verbal communication skills
• Ability to work independently and collaboratively in fast‑paced fab environments
• Willingness to travel domestically and internationally as needed for the role. 
• Proficiency in MS Office

Senior Engineer II, Field Service

• Bachelor’s degree in Electrical, Mechanical, Electromechanical Engineering or related field with 8+ years of experience, OR a Master’s degree with 6+ years of experience OR PhD degree with 4+ years of experience.
• Experience in semiconductor field service experience with demonstrated technical leadership
• Advanced knowledge of tool architecture, control algorithms, and multi‑factor troubleshooting
• Experience driving structured root‑cause analysis and long‑term corrective‑action plans
• Proven ability to lead escalations and manage customer‑technical relationships
• Strong communication and mentorship capabilities
• Ability to work autonomously while guiding and developing other engineers
• Willingness to travel domestically and internationally as needed for the role
• Proficiency in MS Office

What sets you apart

Senior Engineer I, Field Service

• Experience supporting beta tools or early‑option equipment
• Knowledge of wafer‑fab operations, robotics, vacuum systems, plasma, RF, or gas handling
• Experience writing or updating procedures or technical documentation
• Strong customer‑service approach and organizational skills
• Familiarity with structured problem‑solving methods

Senior Engineer II, Field Service

• Demonstrated leadership in complex troubleshooting programs or technical initiatives
• Experience owning customer‑technical relationships, including expectations and long‑term partnership building
• Strong capability in mentoring and developing field engineers
• Hands‑on expertise with fab robotics, vacuum systems, plasma, RF, or gas‑delivery systems
• Experience providing structured feedback to engineering or product teams
• Experience evaluating or supporting beta‑stage or early‑option tools

** This position is not eligible for visa sponsorship for external candidates. Candidates cannot require sponsorship now or in the future**

As a Field Service Engineer – Early Career, you’ll take on a hands-on role supporting ASM’s advanced semiconductor equipment and helping our customers keep their fabs running at peak performance. You’ll build real-world expertise through structured training, mentorship, and on-the-job learning while working directly with technologies that power AI, 5G, cloud computing, and next‑generation devices. This is your chance to apply your engineering background, strengthen your technical capabilities, and join a team that’s shaping the future of semiconductor innovation.

In this role, based in North-Valley/Phoenix, AZ at our customer site, you’ll launch your engineering career at the center of cutting‑edge semiconductor manufacturing. It’s an ideal opportunity for early‑career engineers who want to put their education into practice in a high‑tech environment where every day brings something new to learn.

From your first day, you’ll receive training through hands‑on guidance from seasoned engineers onsite. You’ll work with vacuum systems, plasma, chemical delivery, robotics, sensors, advanced metrology, and complex hardware‑software interactions. Your contributions will have a direct impact on tool performance, system uptime, and customer success—playing a meaningful role in enabling leading‑edge logic technology nodes. This experience lays a strong foundation for rapid growth, technical mastery, and a variety of long‑term career paths within ASM.

Shifts available:

Mon-Fri- 8am-5pm (subjected to OT)

What You Will Be Working On 

• Support installation, maintenance, and repair of ASM semiconductor equipment at customer sites 
• Troubleshoot equipment and process issues with guidance from senior engineers 
• Deliver clear, timely, customer‑focused support with a strong safety mindset 
• Working in cleanroom environments while following strict safety and quality standards.
• Assist in identifying and contributing to continuous improvement efforts  
• Participate in customer escalations alongside experienced team members 

What We Are Looking For 

• Bachelor’s or master’s degree in Electromechanical Engineering, Electrical Engineering, Mechanical Engineering, or related field 
• Candidates who are hands-on and mechanically curious, energized by complex systems and real-world problem solving, Comfortable working in fast paced, hightech environments & motivated to build a long-term engineering career. 
• Internship, co‑op, senior design project, lab research, or hands‑on technical experience 
• Ability to read and interpret basic electronic and electromechanical schematics 
• Understanding of safety protocols and willingness to work in cleanroom environments 
• Strong problem‑solving mindset and eagerness to learn 
• Clear communication skills and a strong customer-service mindset 
• Ability to work independently and collaboratively 
• Willingness to travel domestically and internationally 
• Proficiency with Microsoft Office 

What Sets You Apart 

• Demonstrated commitment to safety, quality, and disciplined execution 
• Exposure to semiconductor processes, wafer fabs, robotics, vacuum systems, plasma, or gas handling 
• Experience writing technical documentation in school or project settings 
• Familiarity with customer‑facing or support roles (internships, tutoring, help desk, teamwork) 
• Interest in structured problem‑solving methods, statistical methods, data analysis. 
• Curiosity and learning orientation when working with advanced semiconductor technologies 
• Participation in engineering clubs, competitions, or technical student groups 

Why join ASM? 

2026 is the year to join ASM as a Field Service Engineer. Apply now! 

We are seeking a Preconstruction Manager to support some of the most innovative, complex, and large-scale data center and mission-critical construction projects in the country. This role will be instrumental in delivering RMCI’s first-generation programs as a General Contractor within hyperscale and enterprise data center environments. 

The Preconstruction Manager provides leadership, structure, and technical expertise across all preconstruction activities at RMCI. Working closely with the Chief Estimator, this role ensures that project pursuits, design development, cost modeling, and early‑phase planning are executed with accuracy, clarity, and strategic intent.

Responsibilities

• Design Management & Technical Coordination
  • Manage design-phase communication between RMCI, owners, and design partners.
  • Lead constructability reviews, design coordination meetings, and technical evaluations.
  • Track design evolution and communicate cost, schedule, and risk impacts to the Chief Estimator.
  • Provide guidance on logistics, phasing, site constraints, and feasibility during design development.
  • Support development of early schedules, general conditions, and procurement strategies.
• Estimating Partnership & Cost Development
  • Align preconstruction strategy with estimating strategy to ensure consistent assumptions, scope clarity, and pricing logic.
  • Review plans, specifications, and addenda to identify scope gaps, risks, and opportunities, coordinating with the Chief Estimator on pricing impacts.
  • Support subcontractor outreach, prequalification, and pricing strategy in collaboration with Estimating Team.
  • Participate in GMP development, cost trending, and buyout strategy discussions.
• Documentation, Communication & Workflow Management
  • Oversee all preconstruction documentation, ensuring accuracy and timely distribution.
  • Review and approve meeting minutes, action logs, and document control outputs prepared by the Preconstruction Coordinator.
  • Maintain alignment between preconstruction deliverables, estimating outputs, and project handoff requirements.
• Leadership, Department Oversight, and Internal Collaboration
  • Lead RMCI’s preconstruction efforts with strategic guidance from the VP of Preconstruction.
  • Provide mentorship, direction, and workflow oversight to the Preconstruction Coordinator.
  • Lead turnover meetings, ensuring assumptions, risks, and cost models are clearly communicated.
  • Develop and refine RMCI’s preconstruction standards, templates, processes, and best practices as the department grows.
  • Foster strong collaboration across Estimating, Project Delivery, Operations, Marketing, and Business Development.
• Client, Partner & Trade Partner Engagement
  • Build and maintain strong relationships with owners, designers, subcontractors, and vendors.
  • Lead or support client-facing cost reviews, design meetings, and pursuit presentations.
  • Represent RMCI professionally at industry events, meet‑and‑greets, and preconstruction meetings.

Qualifications

• 5–10 years of experience in preconstruction, estimating, or design management within industrial construction or mission critical facilities.
• Strong understanding of estimating principles, design development, and alternative delivery methods (CMAR, Design‑Build, Design‑Assist).
• Skilled in conceptual estimating, cost modeling, and reviewing plans/specifications for scope gaps and risks.
• Strong communication and client‑facing presentation skills.
• Proficiency with Microsoft Office; experience with Bluebeam, BuildingConnected, and estimating software preferred.
• Highly organized, detail‑oriented, and able to manage multiple pursuits in a fast‑paced environment.
• Experience mentoring or overseeing junior team members.

Education & Certifications

• Required
  • Bachelor’s degree in Construction Management, Engineering, Architecture, Business, or related field
  • Minimum of five years of experience in preconstruction and estimating roles
• Preferred
  • Advanced coursework or certifications in estimating, preconstruction project management, or construction technology.
  • Experience in general contracting, industrial construction, and mission critical facilities.
  • Training or proficiency in estimating software (Sage, OST, Assemble, etc.).

Safety Level
This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

We are actively seeking driven Project Engineers to contribute to the construction of the most innovative and challenging projects across the Southwest. This includes pivotal roles in commercial, industrial, mission-critical, semiconductor, and data center projects. If you're passionate about making a significant impact and thrive in dynamic environments, we invite you to join our team. Together, we will push boundaries and set new standards in construction excellence.

Responsibilities  

• Coordinates directly with the Project Manager and Project Superintendent to support project success, including fostering a positive safety and quality culture 
• Mentors and develop Field Engineers 
• Champions cost management, forecasting and control, including issuance of purchase orders, subcontract agreements, change orders, etc. 
• Champions the procurement of all materials and equipment associated within their assigned scope, including all submittals, and ensures compliance with the project requirements 
• Champions the procurement schedule and participates in overall project schedule development and forecasting 
• Assists the Project Manager with resolving commercial matters with owners, subcontractors and suppliers, as well as pricing owner change orders 
• Ensures the Field Engineer possesses the most current project documents, including drawings, specifications, submittals, requests for information (RFIs), etc. 
• Champions construction permit applications and renewals, as required by the project 
• Actively participates in daily and weekly project meetings 
• Generates weekly production reports and champions weekly productivity meetings 
• Reviews and processes subcontractor and supplier invoices 
• Generates monthly project progress reports for the Project Manager’s review 
• Assists the Project Manager with assembling monthly owner payment applications 
• Develops and preserves a positive business relationship with owners, clients, engineers and trade partners while ensuring contractual compliance with all parties 

Qualifications 

• Ability to assume responsibility, interface and effectively communicate with others 
• Proficiency with Microsoft Office Suite (Outlook, Word, Excel, PowerPoint, etc.) 
• Positive and teachable attitude 
• Possesses excellent organizational, verbal, written and presentation skills 
• Experience leading field-level staff and successfully achieving project goals 

Education/Certifications 

• Bachelor’s Degree in Construction Management or Engineering and a minimum of two (2) years of relative construction experience as a Field Engineer, Field Superintendent or similar 
• Extensive relative construction experience will be considered in lieu of formal education     

Safety Level
This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

• The inherent responsibilities of your role may include physical working conditions. In order to safely and successfully perform job duties you must be able to:  
• Potentially lift up to 50 pounds 
• Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing  
• Potentially operate a motor vehicle, crane, tractor, etc.  
• We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance to the Americans with Disability Act (ADA)

We are thrilled to announce an opportunity for a Field Superintendent to join our team and support the construction of some of the most challenging and exciting projects in the Southwest. This includes innovative and impactful work in commercial, industrial, mission-critical, and water/wastewater treatment facilities. If you are passionate about leading dynamic teams and driving excellence in construction, we want to hear from you!

Responsibilities 

• Emphasizes a culture of exceptional safety and best-in-class quality to all foremen and craft, including associated trade partners. 
• Responsible for supporting and developing Foremen, including fostering a positive environment for our craft and trade partners to prosper. 
• Provides guidance and support to the Field Engineer regarding survey and layout needs, including providing a schedule as to when such work is required. 
• Assists the Project Superintendent with project schedule development and maintenance, including pull plans, look-ahead schedules, and implementation of the Last Planner System 
• Prepares work plans for critical work and facilitates detailed reviews of such plans with the Field Engineer and Foreman 
• Understands budgeted values for labor, equipment, and consumables; responsible for collaboratively planning work with the Foremen to be commercially successful. 
• Responsible for ensuring efficient crew sizing and makeup is always present and adjusting when necessary. 
• Ensures Foremen are promptly and accurately completing all necessary reports and documentation for their crews (timesheets, daily reports, safety/quality forms, employee evals etc.) 
• Leads coordination and Support for all QC processes for their specific scope or assigned project. 
• Actively participates in daily and weekly project meetings. 
• Promptly reports field issues to the Field Engineer and Project Superintendent 
• Assists this Field Engineer with the development of lift drawings. 
• Develops rapport with owners, clients, engineers, and trade partners while ensuring contractual compliance with all parties. 

#CORBIND1

• Planning and safe execution of Hazardous energy control, T&E, Working at Heights, and confined space. 

Qualifications   

• Working knowledge of all aspects of construction and industry practices, processes, standards, and their impact on project activities 
• Ability to multi-task, collaborate with others, set priorities, and take initiative. 
• Demonstrated success supporting a team through complex project execution. 
• Experience leading project teams and holding them accountable to project goals. 
• Excellent organizational, verbal, written, presentation skills are a must. 
• Proficiency with Microsoft Office Suite (Outlook, Word, Excel, PowerPoint, etc.) 
• STSC trained. 
• Proficiency with Primavera P6 scheduling software a huge plus. 
• Positive and teachable attitude. 
• Possesses excellent organizational, verbal, written and presentation skills. 

Education & Certifications 

• OSHA 30 Certification 

Safety Level
This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

• The inherent responsibilities of your role may include physical working conditions. In order to safely and successfully perform job duties you must be able to:  
• Potentially lift up to 50 pounds 
• Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing  
• Potentially operate a motor vehicle, crane, tractor, etc.  
• We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance to the Americans with Disability Act (ADA)

We are seeking a dedicated and experienced Foreman with a strong electrical background to oversee the daily operations of our assigned projects. If you thrive in a fast-paced environment, excel at fostering collaboration among field support teams, subcontractors, and industry professionals, and have a solid understanding of electrical systems, we invite you to join our dynamic team.

Responsibilities

As the Foreman, you will direct the daily activities on assigned projects and manage all aspects of:

• Safety - Including but not limited to enforcing safety protocols, conducting safety meetings, inspecting worksite conditions, job hazard analysis, ensure Pre-Task Plan (PTP) are developed for all scopes within span of control, incident reporting, safety equipment monitoring.
• Team Management - Motivate, evaluate, discipline, instruct and coach electrical crews of 7-10 to ensure smooth project execution, compliance with safety standards, and high-quality work.
• Project Planning, Scheduling, and Execution - Understanding project scope, ensure all activities for assigned scope are represented on the project schedule. Effective task sequencing and scheduling, material, tools, and equipment identification and planning, manpower/resource allocation. Anticipate constraints and vigorously work to eliminate them.
• Quality Control - Ensuring all processes, systems, and procedures are in place to guarantee that quality standards are met throughout the project, ensuring they meet design specifications, operate safely, and function efficiently before being handed over for full operation.
• Production tracking - Monitoring and documenting construction progress against the schedule, budget, and quality standards.
• Prefabrication Coordination - Efficient planning, communication, utilization of technology, site preparation, and coordination of “Kits” from the shop to the jobsite.
• Model (BIM) Coordination - Integrating and collaborating with different stakeholders using shared digital models to manage and optimize the design and construction of the project.
• Documentation and Reporting - Utilizing all the appropriate systems and processes in-house to document and report out on all progress, delays, incidents, and communications.

 Qualifications

• Minimum of 5 years of Electrical Commercial and/or Industrial experience.
• Working knowledge of construction, electrical work/systems, and troubleshooting.
• Ability to read and interpret drawings/models electronically, using mobile devices is strongly recommended
• Effective communication, troubleshooting, and problem-solving skills
• Proficient knowledge of the National Electrical Code (NEC), local codes.
• Proficient knowledge of OSHA safety standards.  *An OSHA30 card is required for this role.  Nox Group will provide training for you to obtain this if you do not currently have one.
• Proficiency with Microsoft Office Suite

Education

• High school diploma or G.E.D. equivalent.

Safety Level
This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

• The inherent responsibilities of your role mayinclude physical working conditions. In order to safely and successfully perform job duties you must be able to:  
  • Potentially lift up to 50 pounds 
  • Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing  
  • Potentially operate a motor vehicle, crane, tractor, etc.  
• We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance to the Americans with Disability Act (ADA)

We are currently seeking a Quality Technician to support our QAQC Department team. As a Quality Technician, you will play an essential role in ensuring our installations comply with National and City codes, customer design specifications, and Corbins’ expectation of “First Class Work”. You will be supporting the most challenging and exciting projects in the Southwest, including commercial, industrial, mission-critical and water/wastewater treatment facilities.

Responsibilities

• Develop an understanding of the electrical project scope, quality requirements, quality plan, and quality documents pertaining to the assigned scope of work including applicable codes and standards.
• Coordinate with operations to schedule and perform quality inspections and tests to maintain production goals.
• Prepare inspection/test reports and maintain the quality files related to area of responsibility.
• Verify inspection and test compliance with applicable contract documents, codes, and standards.
• Correctly interpret and utilize codes and industry standards to determine compliance of the work.
• Assist the project team with completion of required test documentation.
• Organize quality documents and store per the company and project document management procedures.
• Identify, report, and correct nonconforming work in accordance with the company quality standards and the Project Quality Plan.
• Perform receiving inspection of permanent materials and plant equipment for project requirements as needed.
• Be involved in and provide quality input to task planning meetings.
• Examine/inspect field conditions and identify problems, inaccuracies, and cost saving measures that arise or that may be encountered.  Take corrective actions as needed.
• Identify safety hazards you or other employees may be subject to and take all necessary corrective actions to eliminate or minimize hazards.
• Understand and respond appropriately to all safety hazards and warning devices (i.e. back-up alarms, smell of smoke, different colored warning tags, warning sirens)
• Understand and implement lockout/tagout procedures in safe manner.

Qualifications

• 5+ years working in the electrical industry.
• Experience maintaining effective communications (both orally and written) with supervisor, coworkers, and the project management team
• Experience developing strong working relationships with supervisors, coworkers, and the project management team.
• Electrical code and standards knowledge
• Strong attention to detail and follow-through.
• Proficient in Microsoft Office software (Word, Excel, Outlook)
• Must be a self-starter, be organized, and have good interpersonal skills.
• Ability to complete tasks with minimal supervision.
• Ability to stand for long periods of time in one place.
• Ability to walk job sites throughout the day as required by the job.
• Ability to lift up to fifty pounds, unassisted, as required.
• Ability to work from various heights via ladders, scaffolds, aerial lifts, catwalks and other safe work platforms and area when necessary.
• Able to work a 40-hour work week, with overtime and off-hour shifts as required.
• Able to work in extreme weather conditions and elements, indoor or outdoor, including heat, cold, rain, mud, dust, and snow depending on the job location.

Education/Certifications

• High school diploma or equivalent.
• Trade Certificate or college degree in education preferred or equivalent experience in construction training and development.

Safety Level
This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

• The inherent responsibilities of your role may include physical working conditions. In order to safely and successfully perform job duties you must be able to:  
  • Potentially lift up to 50 pounds 
  • Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing  
  • Potentially operate a motor vehicle, crane, tractor, etc.  
• We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance to the Americans with Disability Act (ADA)

 #NXCLIND1

We are seeking a highly skilled and experienced Quality Manager to join our growing construction enterprise. As the Quality Manager, you will be responsible for implementing and overseeing the company's quality management system for various construction projects. Your primary goal will be to ensure that our construction processes and deliverables meet or exceed industry standards and customer expectations. You will play a vital role in driving a culture of quality excellence throughout the organization.

Responsibilities

• Develop and implement a comprehensive quality management system that aligns with industry standards and best practices, and adherence to corporate standards.
• Establish and enforce quality control processes and procedures for all construction projects, ensuring compliance with applicable codes, regulations, and contractual requirements.
• Conduct regular audits and inspections to assess project quality performance and identify areas for improvement.
• Collaborate with project teams to define quality objectives, establish quality metrics, and monitor progress towards achieving them.
• Provide guidance and support to project managers and superintendents and engineers to ensure adherence to quality standards and timely resolution of quality-related issues.
• Conduct root cause analyses and implement corrective and preventive actions to address quality non-conformities and minimize project risks.
• Develop and deliver training programs to enhance the quality awareness and skills of employees at all levels.
• Lead continuous improvement initiatives to drive efficiency, effectiveness, and innovation in construction processes and methodologies.
• Monitor industry trends, technological advancements, and regulatory changes related to construction quality management, and recommend appropriate updates to the company's quality practices.
• Review contractual documents; including contracts, plans and specifications for quality requirements.  Ensure the proper development of hold points, ITP’s, etc. in the project quality control plans.
• Responsible for the development and growth of the individuals in the Quality Department.
• Collaborate with external stakeholders, including clients, regulatory authorities, and quality certification.

Qualifications

• Journeyman electrician with a minimum of 10 years of experience.
• Minimum of 5 years of experience as a supervisor.
• In-depth knowledge of construction quality standards, codes, regulations, and best practices.
• Strong understanding of quality management principles and methodologies, such as ISO 9001, Six Sigma, or Lean Construction.
• Demonstrated experience in developing and implementing quality management systems.
• Excellent analytical and problem-solving skills, with the ability to identify root causes and implement effective corrective actions.
• Strong leadership abilities and the capacity to influence and collaborate with cross-functional teams.
• Exceptional communication and people skills, with the ability to effectively interact with stakeholders at all levels.
• Proficiency in using quality management software and tools.
• Relevant certificates (e.g., Certified Quality Manager, Certified Quality Engineer) are highly desirable.
• Ability to travel to various job sites around the country as needed.
• Ability to work from various heights via ladders, scaffolds, aerial lifts, catwalks and other safe work platforms and area when necessary.
• Able to work in extreme weather conditions and elements, indoor or outdoor, including heat, cold, rain, mud, dust, and snow depending on the job location.

Education/Certifications

• High school diploma or equivalent.
• Trade Certificate or college degree in education preferred or equivalent experience in construction training and development.

Safety Level 
This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

• The inherent responsibilities of your role may include physical working conditions. In order to safely and successfully perform job duties you must be able to:  
  • Potentially lift up to 50 pounds 
  • Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing  
  • Potentially operate a motor vehicle, crane, tractor, etc.  
• We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance to the Americans with Disability Act (ADA)

#NXCLIND1

Responsibilities

Qualifications

Responsibilities

Qualifications

We are currently seeking a Safety Technician to add to our HSE team.  The ideal candidate will have education, training, and experience in the construction field commensurate with the intended duties coupled with a high level of passion, commitment, and dedication to the health and well-being of others.

Responsibilities

• Support the project’s HSE initiatives and programs.
• Support and conduct jobsite inspections to identify and initiate corrective actions and document observed safe and unsafe work practices or conditions.
• Participate in the incident investigation and causal analysis processes.
• Assist employees and crews in the planning, recognition, evaluation, and mediation of risk through the PTP process.
• Build knowledge and understanding of applicable legislative, client, and Nox policies and procedures applicable to the project.
• Communicate effectively and regularly with Nox personnel and trade partners, visitors, and vendors.
• Provide first aid as necessary and to the limits of training and ability.
• Support the needs of the Project HSE Department.
• Engage in site and crew meetings.
• Spend 90% of time in the field and/or supporting field operations.

Qualifications 

• Understanding of basic construction work practices.
• Good written and verbal communication (includes use of proper grammar, spelling, etc.).
• Ability to interact with both craft and supervisory employees.
• High level of integrity for reporting incidents and events, as well as upholding company policy, personal activities, etc.
• Ability to complete basic safety-related tasks with little direction after initial assignment.
• Ability to understand HSE plans, standards, etc.
• Ability to support and enforce field in compliance with policy, standards, regs, etc. in a professional manner.
• Ability to objectively audit compliance in the workplace.
• Ability to lift 50 pounds, unassisted, frequently throughout the day.
• Ability to work from various heights via ladders, scaffolds, aerial lifts, catwalks and other safe work platforms and area.
• Able to work a 40-hour work week, with overtime and off-hour shifts as required.
• Able to work in extreme weather conditions and elements, indoor or outdoor, including heat, cold, rain, mud, dust, and snow depending on the job location.

Education & Certifications

• High school diploma or GED.
• 3+ years of construction field/craft experience.
• OSHA 30 Hour for Construction, STS-C, or NCCER Field Safety.
• NFPA 70E trained.
• Current training in FA/CPR/AED.
• Proficient in Microsoft Word, Excel, and PowerPoint

Safety Level
This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

• The inherent responsibilities of your role may include physical working conditions. In order to safely and successfully perform job duties you must be able to:  
  • Potentially lift up to 50 pounds 
  • Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing  
  • Potentially operate a motor vehicle, crane, tractor, etc.  
• We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance to the Americans with Disability Act (ADA)

#NXCLIND1

We are looking for a Yard Foreman to join our Field Operations Team. The perfect candidate will possess a solid understanding of general yard laydown operations, excellent interpersonal and communication skills, a high level of drive, and the ability to work independently with a strong sense of urgency. Additionally, they should have an infectious passion for collaboration and teamwork.

Responsibilities

• Complete and communicate daily goals, schedules, and expectations for department yard crew.
• Complete direct report performance evaluations and provide necessary coaching.
• Oversee and maintain current inventory records for materials and equipment received, stored, issued, and transferred off-site. Monitor for re-stocking and/or returns as needed.
• Maintain and oversee material and equipment transaction forms and documentation including requisitions, freight bills shipment records and packing slips.
• Aid enterprise employees in securing, scheduling, and shipping needed materials, equipment, inventory, and delivery confirmation of all items.
• This includes any permits and safety checks as required by law and/or Company policy.
• Coordinate inter-company deliveries and returns with appropriate personnel and ensure paperwork is completed in a timely manner.
• Ensure timely pickup and delivery of all inter-company mail, packages, and deliveries.
• Participate in the development and implementation of department standards and procedures.
• Communicate all personnel needs and projections to direct supervisor as necessary.

Qualifications

• General laydown yard operations knowledge.
• Experience operating general laydown yard equipment.
• Experience managing, evaluating, and coaching direct reports.
• Proven ability to effectively communicate and collaborate with others.
• Experience demonstrating high drive and sense of urgency.
• Demonstrated ability working independently with minimal direction at times.
• Ability to give and receive both praise and criticism equally.
• Demonstrated experience building and maintaining positive relationships.
• Ability to lift 50 pounds, unassisted, frequently throughout the day.
• Ability to work from various heights via ladders, scaffolds, aerial lifts, catwalks and other safe work platforms and area.
• Able to work a 40-hour work week, with overtime and off-hour shifts as required.
• Able to work in extreme weather conditions and elements, indoor or outdoor, including heat, cold, rain, mud, dust, and snow depending on the job location.

Education & Certifications

• High school diploma or G.E.D. equivalent
• Valid driving record 
• OSHA 30 certification Preferred - You may be required to obtain this certification within your first 90 days of employment.

Safety Level

This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

• The inherent responsibilities of your role may include physical working conditions. In order to safely and successfully perform job duties you must be able to:  
• Potentially lift up to 50 pounds 
• Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing  
• Potentially operate a motor vehicle, crane, tractor, etc.  
• We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance with the Americans with Disability Act (ADA)

#NXCLIND1

We are currently seeking highly motivated Design Modelers to join our team. Design Modelers create and develop accurate 3D models that support estimating, coordination, and construction workflows throughout the project lifecycle.

Responsibilities:

• Create discipline-specific 3D models based on design intent, standards, and project requirement
• Utilize collaboration system (Navisworks) to coordinate model content with other trades involved in the project
• Maintain accurate and organized model geometry throughout the project and apply QA/QC standards
• Interpret drawings, specifications, and field inputs to ensure 3D model accuracy
• Work under supervision to learn and follow Design and project specific modeling standards and processes
• Support coordination efforts by updating and refining model content as direction is provided
• Identify modeling issues or conflicts and communicate them to the Design team for review and resolution
• Document and track modeling progress to support project reporting

Qualifications:

• Experience or technical education in BIM, CAD, drafting, engineering, or construction
• Strong spatial understanding and ability to interpret 2D documents into accurate 3D geometry
• Good problem-solving abilities and attention to detail
• Organized, systematic, and able to perform detailed technical tasks
• Willingness to follow direction, learn new processes, and grow within the team
• Knowledge of mechanical, electrical, or construction systems is highly preferred
• Experience with BIM software (Revit, AutoCAD, or similar) is a plus
• Strong interpersonal skills and ability to work within a team environment

Safety Level 

We are currently seeking a Design Superintendent who will be responsible for overseeing the development of Design Coordinators and ensure consistent execution of processes, procedures, and quality standards across the design department. The Design Superintendent plays a key leadership role in supporting Design Coordinators by reinforcing daily goals, ensuring accountability, and maintaining alignment with NOX’s standards of excellence. This role requires a balance of people’s leadership, process discipline, and quality assurance.

Responsibilities 

• Mentor, train, and develop Design Coordinators with a strong emphasis on electrical systems, constructability and field application to ensure technical and professional growth.
• Support Design Coordinators in setting and reinforcing daily and weekly priorities for their teams.
• Assist in workforce planning by monitoring resource needs, team workloads, and coordinator development progress.
• Address HR and employee-related issues promptly, ensuring alignment with company values and policies.
• Foster a culture of accountability, collaboration, and continuous improvement.
• Ensure all design processes, workflows, and procedures are followed and implemented consistently across projects.
• Support the Director of Design in rolling out new standards, tools, or process updates, ensuring smooth adoption by teams.
• Monitor compliance with company policies and give feedback, coordinating with Workforce Development on training and accountability.
• Oversee QA/QC practices to ensure deliverables meet standards, partnering with Workforce Development to reinforce quality in training.
• Conduct regular checks of design outputs to confirm accuracy, completeness, and alignment with project expectations.
• Provide feedback and coaching to Design Coordinators and Design Modelers on quality-related improvements.
• Act as a communication bridge between coordinators, managers, and leadership, ensuring alignment and accountability.
• Escalate issues or concerns to the Director of Design as needed while supporting resolution at the team level.
• Ensure design team members have the tools, support, and guidance needed to meet their responsibilities.

Qualifications

• 5+ years of experience in design, BIM, construction, or related technical field with strong knowledge of electrical background.
• Proven leadership experience supervising or mentoring teams.
• Strong knowledge of design workflows, QA/QC practices, and process management.
• Excellent communication, organizational, and problem-solving skills.
• Ability to manage employee relations with professionalism and fairness.
• Experience with design tools such as Revit, AutoCAD, or Navisworks (preferred but not required).
• Strong interpersonal skills with the ability to build trust and accountability across team.
• Strong written and verbal communication skills.
• Field experience (preferred).

Safety Level 

This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

• The inherent responsibilities of your role may include physical working conditions. In order to safely and successfully perform job duties you must be able to:  
• Potentially lift up to 50 pounds 
• Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing  
• Potentially operate a motor vehicle, crane, tractor, etc.  
• We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance with the Americans with Disability Act (ADA)

As the Virtual Construction Field Engineer, you will support the Nox Innovations virtual design team and broader Nox Group construction installation teams with research and validation in the field. This will include design, trade coordination, layout, installation coordination, and validation.

Responsibilities

• Manage the Asset Routing submissions daily by
  • Providing support to the field on routing processes from Virtual Construction (VC) teams
  • Ensuring routing plans are reviewed and constraints are logged and followed up on by Nox Group’s field personnel and Virtual Construction.
• Coordinate & manage internal and external constraints during the modeling process by
  • Maintaining a daily VC constraint log
  • Coordinate constraint resolution
  • Attend VC internal and external coordination meetings to document and coordinate constraints and assist in coordination resolution
  • Monitor & share weekly constraint progression with the project & VC teams
• Assist with the constructability review in the field.  
• Assist the installation team with understanding the scope as needed
• Perform field validations of installation against the design to ensure the design is being followed and report any design to installation deviations to VC Project Engineer
• Provide total station layout points on site as needed.
• Assist installers with knowledge of how to understand and navigate the model and sheet sets, including PF part labels.
• Perform daily coordination between the VC Project Coordinator and the onsite field operations teams to ensure the model and design are aligned.
• Provide updates and support to the VC Project Manager to ensure continuity between the VC Engineers and the onsite Field Operations

Qualifications

• 5+ years’ experience in the construction field, electrical a bonus
• 2+ years’ experience in CAD
• Experience in Project Layout
• Ability to stand for long hours and walk job sites
• Ability to climb a ladder
• Ability to lift up to 45 lbs
• Excellent written and verbal communication ability
• Organized, systematic, and competent in performing detailed tasks
• Has a strong ability to be a team player and leader
• Self-starter and motivated to work efficiently and effectively
• Must possess outstanding interpersonal skills
• Cultural fit—ability to build positive working relationships

Education/Certifications

• High school diploma or G.E.D. equivalent

Safety Level
This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

• The inherent responsibilities of your role may include physical working conditions. In order to safely and successfully perform job duties you must be able to:  
  • Potentially lift up to 50 pounds 
  • Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing  
  • Potentially operate a motor vehicle, crane, tractor, etc.  
• We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance with the Americans with Disability Act (ADA)

#NXCLIND1 

Nox Innovations is now hiring a Fabrication Worker for our Reno, Nevada location. The ideal candidate will demonstrate knowledge of basic hand tools and power tools. This person will assist in and/or perform under supervision of all aspects of fabrication to support the construction industry. They will be tasked with miscellaneous task including but not limited to material handling assembly of prefabricated systems, and other general labor tasks. This position will require mechanical aptitude, mathematical skills, and literacy skills to meet the position’s primary needs.

Responsibilities

• Fabrication & Assembly: Operate machinery (including but not limited to drilling/deburring hand tools, welders, cutters, grinders, hydraulic CNC equipment) to fabricate parts and assemble components according to specifications.
• Blueprint Reading: Interpret technical drawings, blueprints, and specifications to determine the materials, dimensions, and procedures needed for fabrication.
• Quality Control: Inspect and measure finished products to ensure they meet the required quality standards and specifications.
• Maintenance & Safety: Perform routine maintenance on tools and equipment to ensure safe and efficient operation. Adhere to safety protocols and workplace standards.
• Material Handling: Prepare and organize materials needed for the fabrication process, including cutting and shaping metals, plastics, and composites.
• Collaboration: Work closely with other team members to ensure timely production and resolve any issues that arise during the fabrication process.
• Documentation: Maintain accurate records of work orders, production schedules, and inventory usage.
• Problem-Solving: Troubleshoot and resolve issues related to fabrication processes, machinery, or materials.
• Perform jobsite housekeeping and general labor
• Perform other Prefab related duties and assignments as instructed by Supervisor

Qualifications

• Ability to read and interpret technical drawings, blueprints, instructional manuals and understand specifications
• Knowledge of safety procedures and best practices in a manufacturing environment.
• Basic math skills for measuring, calculating dimensions, and material quantities.
• Proficiency in using fabrication tools and machinery
• Ability to lift heavy materials up to 50lbs and stand for extended periods. Comfort with handling tools and machinery·
• Self-motivated and eager to learn
• Ability to follow directions, both written and verbal
• Ability to lift 50 pounds, unassisted, frequently throughout the day
• Ability to stand or be on your feet for long periods of time
• Ability to do the following: bending, squatting, crawling, climbing, kneeling, balancing, pushing, pulling, reaching overhead, and repetitive use of arms, hands, and fingers

Experience:

• Previous experience in a fabrication, manufacturing, or mechanical environment is preferred. Experience with welding, cutting, or machine operation is a plus.

Education & Certifications

• High school diploma or equivalent; technical certifications or training in fabrication or welding are advantageous.

Safety Level

This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

• The inherent responsibilities of your role may include physical working conditions. In order to safely and successfully perform job duties you must be able to:  
• Potentially lift up to 50 pounds 
• Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing  
• Potentially operate a motor vehicle, crane, tractor, etc.  
• We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance with the Americans with Disability Act (ADA)

#NXCLIND1

As a Purchasing Agent, you will be assigned to a specific construction market within our scope of work, playing a pivotal role in ensuring the success of each project from inception to completion. Your responsibilities will encompass vendor management, procurement processes, and ensuring smooth coordination between various teams. You’ll help manage the flow of materials and services, contribute to strategic decision-making, and ensure projects stay on track by delivering on time and within budget.

Location: Phoenix, AZ

Responsibilities

• Build and maintain strong relationships with vendors, continuously enhancing your knowledge of their offerings and capabilities.
• Support estimating personnel with vendor contacts, real time pricing, and lead times for specific items.
• Assist in the decision-making process for awarding engineered buyout and commodity packages. Compile quotes by material type and project phase, and request updated, discounted pricing from vendors using in-house procurement software.
• Create and manage “Hold for Release” purchase orders, and request cutsheets for submittal. Deliver completed procurement plans to the project team for final approval.
• Act as liaison between operations and distribution, ensuring constant, quality communication, detailed tracking logs, complete packing slips, organized deliveries, proper palletization of material and clear Proof of Delivery.
• Help source back-ordered items, confirming change orders to buyout packages, managing return/replacement logistics and being their sole source for procurement.
• Oversee all rental requests across the enterprise, ensuring timely and accurate rental equipment availability. Become an expert in the rental software we use, provide training to operations teams, and manage committed cost forecasting.
• Work closely with the accounting team by regularly reviewing open purchase orders in our payment software. Ensure that committed costs and received amounts are accurate, resolve any discrepancies, and close out completed purchase orders.

Qualifications 

• 5+ years of procurement/purchasing experience, preferably in construction.
• Moderate to strong familiarity with electrical commodity material.
• Strong Interpersonal and collaborative skills.
• Moderate technical skills for software training and implementation.
• Task oriented, adaptable and organized.
• Must have Reliable transportation for commute and occasional jobsite visits.

Education & Certifications

• High School diploma or GED

Safety Level
This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

#NXCLIND1

The Chief Estimator is responsible for leading and managing a team of estimators to develop accurate and competitive cost estimates for construction projects. This role involves overseeing the preparation of bid proposals, coordinating with various Enterprise Markets, and ensuring compliance with industry standards and company policies. The Chief Estimator plays a crucial role in securing new projects and contributing to the overall success and profitability of the company.

Responsibilities

• Leadership and Management:
• Lead and mentor the estimating team, providing guidance, and support to ensure high performance.
• Collaborating with VP of Estimating to allocate resources effectively and manage the workload of the estimating team.
• Giving report out and updates of estimating team assigned to growth and development as it relates to Estimators.
• Estimating and Proposal Development:
• Oversee the preparation of detailed cost estimates for construction projects, including labor, materials, equipment, and subcontractor costs.
• Establish project playbook for estimators so they know what they are responsible for and when it is to be delivered.
• Review and analyze project plans, specifications, and other documentation to prepare comprehensive estimates.
• Coordinate with VPE’s, project managers, engineers, and architects to gather necessary information for accurate estimating.
• Ensure that all estimates are complete, accurate, and submitted within the required timeframe.
• Collaboration and Communication:
• Work closely with VPE’s, estimator, and project management teams to understand project requirements and objectives.
• Assist VPE’s in communicating with clients, subcontractors, and suppliers to obtain necessary information and clarify project details.
• Participate in pre-bid meetings, site visits, and post-bid negotiations as required.
• Quality Control and Risk Management:
• Review of all contracts and front-end documents. Work closely with VPE’s to incorporate proposals and contract negotiations.
• Identify and assess potential risks and uncertainties in project estimates and develop mitigation strategies.
• Ensure compliance with company policies, industry standards, and regulatory requirements.
• Continuous Improvement:
• Stay current with industry trends, market conditions, and technological advancements in estimating software and tools.
• Collaborating with VP of Estimating to promote and implement process improvements to enhance estimating efficiency and accuracy.
• Provide feedback to management on potential opportunities for business growth and process optimization.

Qualifications

• Experience:
  • Minimum of 10 years of experience in construction estimating, with at least 5 years in a leadership or managerial role.
  • Proven history of successfully estimating and securing large-scale construction projects.

• Skills:
  • Strong analytical and critical thinking skills.
  • Excellent leadership and team management abilities.
  • Proficient in estimating software (e.g., Sage, Accubid, Bluebeam, or similar).
  • Outstanding written and verbal communication skills.
  • Ability to work under pressure and meet tight deadlines.
  • Strong negotiation and people skills.
  • Proficient in Word & Excel programs.

Safety Level 

This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

Sr. Estimator provides support for single large projects or multiple smaller projects. Primary duties include participation in bid efforts and providing administrative support to the estimating department.  The Estimator is expected to be competent in basic estimating tasks and is developing an understanding of more advanced estimating principles including conceptual estimating, project logistics, and indirect costs.

Responsibilities

• Preparation of Estimates:
• Develop and fundamental understanding of layout plans, process and procedures and construction environments.
• Review and analyze project plans, specifications, and other documentation to prepare time, cost, materials, and labor estimates with direct guidance from management staff.
• Provide ancillary support to preconstruction effort such as document control, correspondence internal/external, material research etc.
• Cost Analysis:
• Conduct quantity take-offs and build a foundational understanding systems takeoff with oversight from management personnel.
• Training and understanding of cost model processes, outreach and validation
• Collaboration and Coordination:
• Collaborate with preconstruction, operational and opportunity stakeholders.
• Bid Management:
• Assist in preparation and submit comprehensive bid packages in a timely and accurate manner.
• Continuous Improvement:
• Engage in training, site walks and all opportunities and tasks assigned by Chief Estimators.
• Stay updated with industry trends, advancements, and best practices in cost estimating and construction methods.
• Continuously seek opportunities to improve the accuracy and efficiency of the estimating process.

Qualifications

• Experience:
  • Minimum of 3-10 years of experience in construction estimating, with a proven track record of successful project estimates.
  • Experience in industrial projects is highly desirable.

• Skills:
  • Proficient in estimating software (e.g., Accubid, Bluebeam, Excel, Word, Sage Estimating).
  • Strong understanding of construction methods, materials, and regulations.
  • Excellent analytical and mathematical skills.
  • Strong communication and interpersonal skills.
  • Detail-oriented with exceptional organizational skills.
  • Ability to work independently and as part of a team.

Safety Level 

This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

We are seeking a skilled Payroll Coordinator to support our team as we take on some of the most innovative, complex, and large-scale data center and mission-critical construction projects in the country. The primary function of the Payroll Coordinator position is to support in the weekly processing of Nox Group’s payroll. The ideal candidate will have a high level of attention to detail and discretion with confidential data.

Responsibilities

• Update employee information as needed in Spectrum.
• Monitor and process garnishments and child support orders.
• Enter deductions and add-ons, taxes, and other pertinent information.
• Update PTO banks and communicate questions around PTO to employees.
• Prepare direct deposit weekly.
• Communicate with field workforce and Supervision on hours discrepancies including but not limited to missed time, per diem, overtime pay.
• Process separation checklist for terminated employees.
• Process weekly payroll for our temporary workforce
• Communicate with our temp staffing agencies on hours and invoicing.
• Respond to question sent to the shared payroll inbox.
• Provide other administrative support to the People department as needed.

Qualifications

• 1-2 years payroll experience.
• Attention to detail needed.
• Excellent verbal and written communication skills.

Education/Certifications

• High School Diploma required.

The primary function of the Human Resource Administrator is to support the NXG People department in driving the operations, administration, culture, and values to our growing workforce. The HR Administrator role will focus heavily on executing on the various administrative tasks within the department as well as answering questions from across the company to help support the workforce. The ideal candidate will be organized, have great time management skills, and service oriented to provide the best employee experience.

Responsibilities

• Manage the HR Inbox, answering and assisting with all questions and triaging incoming emails
• Gather information needed to respond to incoming mail and employee requests, including employment verifications, electrical verification applications, wage claims, unemployment requests, etc.
• Assist with benefits administration, processes, and questions
• Support onboarding new hires as needed, including sending appropriate communications after hire
• Maintains Human Resource Information System records and QA/QC as needed; provide technical guidance
• Assist with ongoing HR audits
• Manage various projects, including employee anniversary recognition, baby baskets, and others as needed
• Complete HR admin operations duties such as processing separations, etc.
• Provide Nox Group and HR policy guidance and interpretation
• Gather and send reports, internally and externally as needed
• Assist with SOPs and process documentation
• Other duties as assigned

Qualifications

• Bi-lingual in Spanish/English preferred
• Highly proficient in Microsoft Excel
• Must be able to handle sensitive and confidential information
• At least 1 year of HR experience, preferably in construction

Education & Certifications

• Bachelor’s degree in a relevant field preferred but not required.

Safety Level

This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

#NXCLIND1

We are seeking a driven, resourceful Talent Acquisition Specialist to join our Recruiting Team and support hiring for some of the most innovative, complex, and large-scale data center and mission-critical construction projects in the country.

This role is ideal for a recruiter who thrives in fast-paced, high-demand environments, enjoys tackling hard-to-fill roles, and is motivated to act as a true talent partner to the business — not just an order taker. You will play a key role in identifying, engaging, and securing top talent across our enterprise while helping shape recruiting strategies that directly impact project success.

Responsibilities:

• Manage the full-cycle recruiting process for professional, technical, and operational roles across the enterprise
• Partner closely with hiring managers and business leaders to develop proactive recruiting strategies, not just fill open requisitions
• Source hard-to-find talent using a variety of tools, networks, and creative sourcing methods
• Conduct thoughtful candidate screenings to evaluate technical capability, culture fit, and long-term potential
• Act as a trusted advisor to hiring managers, providing guidance on talent availability, market conditions, and hiring strategy
• Build and maintain strong pipelines for both high-volume and specialized roles
• Develop meaningful relationships with candidates and effectively sell opportunities and company value
• Coordinate interviews and maintain strong communication with candidates and stakeholders throughout the hiring process
• Participate in job fairs, networking events, and industry outreach to expand talent pipelines
• Support candidate onboarding to ensure a smooth and successful start
• Provide market intelligence and recruiting insights to leadership to improve hiring outcomes
• Collaborate with recruiting and marketing teams to support employer branding and recruitment marketing efforts
• Maintain accurate and organized recruiting activity within the Applicant Tracking System (ATS) (Greenhouse)

Qualifications

• 2+ years of recruiting experience, preferably in construction, engineering, technical, skilled trades, or other fast-paced industries
• Demonstrated success sourcing and hiring for hard-to-fill and/or high-volume roles
• Proven ability to build strong relationships with hiring managers and candidates
• Strong sourcing skills and experience utilizing tools such as LinkedIn Recruiter, Indeed, ZoomInfo, job boards, and social media
• Ability to prioritize multiple roles while maintaining attention to detail and urgency
• Comfortable working in a fast-paced, high-growth environment
• Strong communication skills with the ability to influence and guide hiring decisions
• Experience using an ATS (Greenhouse preferred)
• Proficiency in Microsoft Office applications

Education & Certifications

• Bachelor’s degree in Human Resources, Business, or a related field preferred, or equivalent experience

Safety Requirements

This is a safety-sensitive position, and all applicable policies including drug testing and background checks will apply.

 #NXCLIND1

We are poised to continue this growth over the next several years and are looking for a Project Accountant to join our team in Phoenix, AZ. You will not only work on some of our more strategic and high-profile accounts; you also will work closely with our top Project Managers and Project Engineers. As the front line for project accounting, this position plays a pivotal role in facilitating seamless financial operations, maintaining accurate project records, and promptly addressing/escalating any financial issues or discrepancies to Project Accounting Managers, ensuring the overall financial health and success of projects.

Responsibilities 

PROJECT FINANCIAL MANAGEMENT:

• Set up and maintain project in ERP system, ensuring adherence to all contractual requirements and internal procedures
• Review and process project for accuracy and compliance with company standards
• Conduct monthly Work-In-Process (WIP) reviews to analyze and monitor project profitability, percent complete, and billing/payment status. Provide detailed reports and insights to project managers and stakeholders.
• Support and work closely with Operations regarding contracts, changes, costs/cost transfers, compliance documents, and any additional services-related to financials

CHANGE ORDER MANAGEMENT:

• Issue and manage subcontractor documentation in accordance with contract specifications. Ensure all required documentation is collected and filed.
• Monitor, process, and issue change orders, ensuring they are correctly documented and approved. Maintain clear records of all change orders and associated financial impacts.
• Process project accounts payable, ensuring timely and accurate payments. Verify that all invoices align with contractual terms and project requirements
• Manage subcontractor compliance, including insurance, lien waivers, retention, and W-9 forms. Ensure all subcontractor documentation is up-to-date and compliant.
• Research and resolve any issues related to subcontractor billing, working to ensure all discrepancies are addressed and resolved promptly.

ACCOUNTS RECEIVABLE:

• Compile, prepare, and submit monthly project billings in accordance with contract requirements. Ensure that all billings are accurate and submitted in a timely manner
• Track payment status, resolve any discrepancies or issues, and coordinate with customers to facilitate collections, ensuring that all project billings are collected efficiently and in accordance with contract terms.
• Manage and update owner and subcontractor schedules of values, ensuring accuracy and alignment with project progress and contract terms.
• Research and resolve billing and payment discrepancies, addressing any issues promptly to ensure smooth financial operations.

Qualifications

• Minimum of 1-2 years of experience in accounting, with exposure to project accounting preferred
• Familiarity with construction accounting and knowledge of the project structure in a General Contractor/Subcontractor business environment a plus
• Spectrum accounting/project management software a plus; proficient with Microsoft Suite (Word, Excel, Outlook) required
• Excellent organizational skills with the ability to manage multiple projects and deadlines effectively and respond to changes in priorities
• Strong verbal and written communication skills for interacting with operational teams, customers, vendors and other stakeholders
• Ability to maintain a high level of precision and accuracy in financial reporting and documentation
• Team player with the desire to provide a high level of customer service and solutions

Safety Level
This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

#NXCLIND1

We are seeking a highly skilled and experienced Electrical Commissioning (Cx) Director to join our growing construction enterprise. As an Electrical Cx Director, you will be responsible for all aspects of electrical commissioning for projects across the company. You will play a pivotal role in ensuring our Electrical Commissioning Managers and Superintendents are following all policies as it relates to commissioning electrical equipment. Additionally, your role as Electrical Cx Director will allow you to influence and create new standards for how the company completes our electrical commissioning.   

Key Responsibilities

• Provide strategic direction and leadership for the company’s electrical commissioning program.
• Establish standardized commissioning procedures, protocols and best practices to drive consistency across all projects.
• Align commissioning practices with Safety, Quality and Operations programs.
• Manage, mentor and develop Electrical Cx Managers.
• Develop and manage department staffing plan and resource allocation.
• Foster a culture of safety, innovation and continuous improvement within the commissioning department.
• Represent the commissioning team in executive-level meetings with clients and contractors.
• Assist in project pursuits/interviews.

Minimum Requirements

• Minimum of 5+ years of electrical commissioning experience and 10+ years of electrical construction experience.
• Track record of leading large teams across multiple simultaneous projects.
• Strong client-facing and executive communication skills.
• Deep knowledge of commissioning standards (NEC, NFPA, IEEE, NETA, etc.).
• Proven ability to implement scalable processes and mentor future leaders.

Physical Requirements

• Ability to travel to various job sites as needed.
• Ability to lift up to fifty pounds, unassisted, as required.
• Ability to work from various heights via ladders, scaffolds, aerial lifts, catwalks and other safe work platforms and area when necessary.
• Able to work a 40-hour work week, with overtime and off-hour shifts as required.
• Able to work in extreme weather conditions and elements, indoor or outdoor, including heat, cold, rain, mud, dust, and snow depending on the job location.

Education/Certifications

Safety Level
This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

• The inherent responsibilities of your role may include physical working conditions. In order to safely and successfully perform job duties you must be able to:  
  • Potentially lift up to 50 pounds 
  • Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing  
  • Potentially operate a motor vehicle, crane, tractor, etc.  
• We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance with the Americans with Disability Act (ADA)

#NXCLIND1

Building upon what has been established as a foundation in our industry for years, our enterprise pushes beyond construction as we know it. The collective purpose of our companies is to drive forward innovation and build the next generation of construction leaders. Each is designed to contribute to this mission in a unique way, offering specialized services that support the growing demand and dynamic nature of this complex industry. Our companies and workforce operate together toward a common goal as we design projects, manufacture products, install systems, develop strategies, and provide services that enable the benefits of technology to be utilized, businesses to scale, and society to flourish.

We are seeking a highly skilled and experienced Electrical Commissioning (Cx) Superintendent to join our growing construction enterprise. As an Electrical Cx Superintendent, you will be responsible for all aspects of electrical commissioning for projects. This includes first-time energization, functional testing, schedule management, etc. You will play a vital role in ensuring equipment is energized safely and in the appropriate manner to maintain the sequence required to effectively manage the schedule.  

Key Responsibilities 

• Organize and lead field execution of commissioning such as switching and breaker opening/closing, functional testing, system integration testing, etc.
• Develop electrical commissioning and testing procedures, including first-time energization procedures.
• Validate installation and pre-functional checklists for gear (breakers, switchgear, UPS, batteries, generators, etc.).
• Schedule, lead, and troubleshoot all functional performance testing (FPT) for electrical systems.
• Ensure test equipment is available, calibrated, and properly used.
• Manage third-party vendors for specialized equipment commissioning.
• Interface with the Commissioning Authority (CxA) and Owner’s reps during witness testing.
• Report on progress to the project Commissioning Manager or Cx agent.
• Direct Cx Techs and trade partners in field execution.
• Coordinate system walkdowns, equipment startups, and functional testing.
• Support Cx Manager in reporting and metrics.

Minimum Requirements 

• Minimum of 8-10 years of electrical construction experience.
• Previous experience with energization and switching of electrical equipment.
• Knowledgeable of the National Electrical Code (NEC).
• Experience with Lock-Out/Tag Out (LOTO).
• Understanding of one-line diagrams and schematics.
• Ability to review equipment submittals.
• NFPA 70E Trained.
• OSHA 30.
• Exceptional communication and interpersonal skills, with the ability to effectively interact with stakeholders at all levels.
• Familiarity with Microsoft Office products, specifically Microsoft Word and Excel.

Physical Requirements

• Ability to travel to various job sites as needed.
• Ability to lift up to fifty pounds, unassisted, as required.
• Ability to work from various heights via ladders, scaffolds, aerial lifts, catwalks and other safe work platforms and area when necessary.
• Able to work a 40-hour work week, with overtime and off-hour shifts as required.
• Able to work in extreme weather conditions and elements, indoor or outdoor, including heat, cold, rain, mud, dust, and snow depending on the job location.
• Ability to walk or stand for an extended period of time.

Safety Level 

This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

• The inherent responsibilities of your role may include physical working conditions. In order to safely and successfully perform job duties you must be able to:  
• Potentially lift up to 50 pounds 
• Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing  
• Potentially operate a motor vehicle, crane, tractor, etc.  
• We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance with the Americans with Disability Act (ADA)

#NXCLIND1

As the Executive Assistant, you will play a pivotal role in supporting executive leadership by providing high-level administrative assistance. We are seeking a proactive, detail-oriented, organized, and effective communicator with strong interpersonal skills and a passion for collaboration. 

Responsibilities

• Manage and optimize executive calendars, meetings, and communications to support business priorities.
• Coordinate complex travel arrangements, including itineraries and logistics.
• Prepare high-quality materials such as presentations, agendas, reports, and correspondence.
• Anticipate executive needs, proactively resolving issues and ensuring seamless day-to-day operations.
• Plan and execute meetings and events, including logistics, catering, and materials.
• Support special projects and cross-functional initiatives, ensuring timely follow-through.
• Serve as a liaison with internal teams, external partners, and business stakeholders.
• Maintain and manage key business data, tracking tools, and proposal-related

Qualifications

• Proven experience in a role providing high-level administrative support. 
• Experience in a role where you were successful in task prioritization, managing multiple deadlines, and executing under pressure. 
• Experience in a role where you passionately demonstrated strong organizational skills, attention to detail, cross department collaboration, and the ability to build and maintain positive relationships. 
• Construction or related industry experience preferred. 
• Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook). 
• Microsoft Teams, Bridget Bench, and Click Up experience or equivalent a plus. 
• Experience with prequalification’s, take-offs, bids, and scheduling a plus. 

Education & Certifications

• Bachelor’s degree preferred but not required.

Safety Level
This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

#NXCLIND1

Nox Group of Companies is seeking an IT Coordinator to join our growing team in Phoenix, Arizona!  

This position coordinates assets and requests for the IT department. This relates to all technology, including workstations, servers, printers, networks, cell phones, desk phones, and vendor-specific hardware and software. The role also implements internal systems and assists IT team members with requests. This position will help Nox Group and its companies grow.

Responsibilities

• Entering devices into the system
• Audit device list for accuracy
• QA device setups
• Ensure IT Requests are moving and the device pickup pile is accurate
• Monitor Shipping for devices
• Ensuring Backlog of devices are accurate
• User Setup
• Separations
• Monitor the ticketing system for stale tickets
• System documentation of maintenance and upgrades.
• Communicate with users as required: keep them informed of incident progress.
• Document maintenance for all computer systems and network infrastructure.
• Review documentation and ensure it meets enterprise standards.
• Review inventory for out-of-date/spec devices

Qualifications

• Detail oriented
• Ability to work in a team and communicate effectively.
• Business awareness: specific knowledge of the users and how IT relates to their department strategy and goals.
• Ability to multi-task and adapt to changes quickly.
• Technical awareness: the ability to match resources to technical issues appropriately.
• Provide service awareness of all organizations' critical IT services for which support is provided.
• Self-motivated with the ability to work in a fast-moving environment.
• Office 365

Education/Certifications

Safety Level
This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

• The inherent responsibilities of your role may include physical working conditions. In order to safely and successfully perform job duties you must be able to:  
  • Potentially lift up to 50 pounds 
  • Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing  
  • Potentially operate a motor vehicle, crane, tractor, etc.  
• We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance to the Americans with Disability Act (ADA)

#NXCLIND1

The Onboarding Manager at Nox Group is a working manager role. You are responsible for both the strategic leadership of the onboarding department and the hands-on execution of the end-to-end new hire lifecycle. By managing your own desk of hires while leading the team, you ensure a seamless, high-touch transition from recruitment to "Day One" for every new teammate

Responsibilities

• Manage the complete onboarding lifecycle for your designated hires, including all communications and system entries.
• Provide leadership and daily direction to the Onboarding Admins.
• Monitor the initiation of onboarding in Greenhouse and other applicable systems to ensure all new hires are processed immediately upon offer acceptance.
• Act as the primary point of contact for complex start-date changes, rescinded offers or issues involving the Talent and Workforce Development teams.
• Oversee the administration of background checks and drug screenings to ensure 100% compliance with safety-sensitive requirements.
• Audit I-9 and E-Verify completions to maintain strict adherence to federal law and manage re-verification schedules for current employees.
• Verify that all employee records across People systems (Spectrum, Greenhouse, etc.) are accurate, up-to-date,
• Regularly update the Onboarding process as business needs change.
• Be the subject matter expert of all onboarding systems.
• Ensure up to date compliance with all onboarding processes.

Qualifications

• 2-4 years of progressive HR Experience
• Strong understanding of employment law
• Experience in construction preferred
• At least 1 year of managing others or leading teams
• Excellent organizational and communication skills
• Excellent analytical and problem-solving skills

Education & Certifications

• Bachelor’s degree in a relevant field.

Safety Level
This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

#NXCLIND1

Sr. Estimator provides support for single large projects or multiple smaller projects. Primary duties include participation in bid efforts and providing administrative support to the estimating department.  The Estimator is expected to be competent in basic estimating tasks and is developing an understanding of more advanced estimating principles including conceptual estimating, project logistics, and indirect costs.

Responsibilities

• Preparation of Estimates:
• Develop and fundamental understanding of layout plans, process and procedures and construction environments.
• Review and analyze project plans, specifications, and other documentation to prepare time, cost, materials, and labor estimates with direct guidance from management staff.
• Provide ancillary support to preconstruction effort such as document control, correspondence internal/external, material research etc.
• Cost Analysis:
• Conduct quantity take-offs and build a foundational understanding systems takeoff with oversight from management personnel.
• Training and understanding of cost model processes, outreach and validation
• Collaboration and Coordination:
• Collaborate with preconstruction, operational and opportunity stakeholders.
• Bid Management:
• Assist in preparation and submit comprehensive bid packages in a timely and accurate manner.
• Continuous Improvement:
• Engage in training, site walks and all opportunities and tasks assigned by Chief Estimators.
• Stay updated with industry trends, advancements, and best practices in cost estimating and construction methods.
• Continuously seek opportunities to improve the accuracy and efficiency of the estimating process.

Qualifications

• Experience:
  • Minimum of 1-3 years of experience in construction estimating, with a proven track record of successful project estimates.
  • Experience in industrial projects is highly desirable.

• Skills:
  • Proficient in estimating software (e.g., Accubid, Bluebeam, Excel, Word, Sage Estimating).
  • Strong understanding of construction methods, materials, and regulations.
  • Excellent analytical and mathematical skills.
  • Strong communication and interpersonal skills.
  • Detail-oriented with exceptional organizational skills.
  • Ability to work independently and as part of a team.

Safety Level 

This is a safety sensitive position, and all applicable policies including drug test and background check will apply.

•   7+ years of mortgage compliance experience at a non-bank lender, mortgage company, or state/federal regulatory agency
•   Expert-level knowledge of multi-state NMLS licensing for both entities and individuals, including license applications, amendments, renewals, and surety bond management; expert-level knowledge of multi-state licensing for both entities and individuals for title and escrow companies strongly preferred
•   Hands-on experience preparing and submitting regulatory filings, including HMDA LAR, NMLS Mortgage Call Reports (MCR), and state-specific periodic reports
•   Demonstrated ability to administer a Compliance Management System (CMS), including policy maintenance, training programs, and complaint management
•   Track record of managing state and federal (CFPB) regulatory examinations from preparation through remediation
•   Working knowledge of BSA/AML compliance program requirements, including SAR and CTR filing obligations; ability to serve as AML Compliance Officer if required
•   Experience identifying, tracking, and implementing regulatory changes affecting mortgage origination operations
•   Ability to resolve day-to-day loan-level compliance issues in a fast-paced, high-volume origination environment
•   Bachelor’s degree in business, law, or related field required; CRCM, CAMS, or comparable professional designation strongly preferred

About the Role

Verkada prides itself on maintaining a high hiring bar while bringing in diverse and unconventional backgrounds of driven individuals obsessed with their craft. As a Business Value Manager, you will have a direct impact on Verkada’s Enterprise sales motion, bridging the gap between complex technologies and tangible financial and operational outcomes.

Reporting to the Chief of Staff to the CRO, you will partner with Enterprise Sales Leaders to architect a value selling framework to scale to the Enterprise Sales organization, building the infrastructure to reference key customer outcomes and win stories, as well as partnering with Product Marketing and Enablement to develop assets and enablement programs. In addition to pioneering the Business Value Selling program at Verkada, you will serve as the Strategic Deal Architect behind our most complex, multi-million-dollar deals, transforming technical capabilities into compelling financial and operational narratives. In this high-visibility role, you will move beyond feature-selling, working at the intersection of finance, product, and sales to quantify the operational and financial impact of our platform, directly influencing the investment decisions of C-suite executives at the world’s leading enterprises.

Please note: this role is remote - with 50% of travel required.

What You'll Do

• Program Development: Partner with Product Marketing to create and refine standardized value frameworks, templates, and "talk tracks" to scale business value services across the global enterprise sales organization.
• Value Realization Tracking and Database: Monitor and analyze data from current customers post-implementation to validate that the promised value was delivered, partnering with Product Marketing to maintain a database of relevant data, and creating "real-world" success stories for future sales.
• Sales Enablement: Coach sales teams on value-selling methodologies, including referencing of relevant customer data,  and provide the tooling/content for self-service business justifications.
• Value Discovery: Partner with account executives to lead discovery sessions with CxOs to identify pain points and desired outcomes.
• Financial Modeling: Develop ROI (Return on Investment) and TCO (Total Cost of Ownership) value models to quantify the business impact of solutions.
• Business Case Development: Draft data-backed business cases for strategic opportunities, ensuring every claim is anchored in measurable customer impact.
• Executive Storytelling: Craft and deliver executive-level business cases that align technical solutions with broad corporate objectives.
• Commercial Objection Handling: partnering with Sales to dismantle financial objections in real-time.

What You Bring

• Strategic Consulting: 5–9+ years of experience in management consulting, business transformation, or enterprise software sales.
• Financial Intelligence: Proficiency in building complex financial models and the ability to navigate financial documents like 10-Ks and earnings transcripts.
• Analytical Power: Proficiency in data visualization and manipulation tools such as Looker and advanced Google Sheets.
• Executive Presence: Exceptional presentation and communication skills, with a proven ability to influence C-suite decision-makers.
• Technical & Market Acumen: Deep understanding of SaaS sales motions, industry trends (e.g., AI/ML acceleration), and how IT functions like operations and security drive value.

Analytical Rigor: Ability to derive meaningful insights from large, complex data sets to build compelling business cases.

US Employee Benefits

Verkada is committed to fostering a workplace environment that prioritizes the holistic health and wellbeing of our employees and their families by offering comprehensive wellness perks, benefits, and resources. Our benefits and perks programs include, but are not limited to:

• Healthcare programs that can be tailored to meet the personal health and financial well-being needs - Premiums are 100% covered for the employee under at least one plan and 80% for family premiums under all plans
• Nationwide medical, vision and dental coverage
• Health Saving Account (HSA) with annual employer contributions and Flexible Spending Account (FSA) with tax saving options
• Expanded mental health support
• Paid parental leave policy & fertility benefits
• Time off to relax and recharge through our paid holidays, firmwide extended holidays, flexible PTO and personal sick time
• Professional development stipend
• Wellness/fitness benefits
• Healthy lunches provided daily
• Commuter benefits

As a Food Service Assistant at Bezos Academy, you’ll help provide nutritious, compliant meals to children at our tuition-free, Montessori-inspired preschool and provide direct support with a variety of additional tasks both in and out of the classroom. You will manage all aspects of food preparation and service with strong attention to detail, organization, and adherence to safety protocols. Key responsibilities include preparing CACFP-compliant menus, placing food orders and managing food costs, receiving and verifying food deliveries, ensuring all meals are delivered to classrooms on time, and managing all clean-up, organization, and documentation. Assuming full ownership of the kitchen and food operations at the school, you will serve meals in accordance with USDA requirements, Bezos Academy policies, and local childcare regulations.

Beyond the kitchen, you will assist school staff and administration with a variety of tasks including inventory checks, laundry, and other ad hoc duties. As needed, you will also occasionally step into classrooms to provide direct supervision and support to the children. You will become an integral part of your school team working to improve processes and provide an excellent preschool experience where we nurture every child’s full potential. 

LOCATION

We are actively hiring part-time Food Service Assistants at our Mesa, Arizona preschools with an expected start date of August 2026: 

• Mesa – Adobe Hills (1001 N Power Road, Mesa, AZ 85205)

SCHEDULE, BENEFITS, & COMPENSATION

• This is a part-time, non-exempt/hourly position requiring a minimum of 25 hours per week, with occasional opportunities to work additional hours based on school needs.  
• You will work a five-hour shift, Monday through Friday, totaling 25 hours per week. Specific school schedules are determined by school leaders when considering all staff, classroom, and community needs, but are currently expected to be 7:30am-12:30pm. 
• Compensation for this position is $19-$28 per hour. The upper third of the compensation range is typically reserved for existing employees who have been in the role for multiple years and who demonstrate strong performance over time. Starting compensation will vary by qualifications and prior experience. 
• Benefits include paid sick (care) time, accrued based on hours worked, and a 401(k) plan with a 4% employer contribution match.  

MINIMUM QUALIFICATIONS  

• Age 18 with high school diploma or GED  
• Ability to pass background checks and complete all trainings required by the Arizona Department of Children, Youth, and Families upon hire
• Knowledge of cooking methods and procedures, including various types of preparation
• Ability to lift up to 50 pounds, stand for long periods of time, and perform a variety of repetitive tasks to prepare and serve food safely
• Experience working in an institutional or highly regulated kitchen/food setting with a clear understanding of food preparation best practices and protocols
• Active and current food worker card
• Understanding of Arizona food and beverage worker manual
• Ability to speak, read, and write English fluently
• Basic proficiency in Microsoft Office (Word, Excel, Outlook)

PREFERRED QUALIFICATIONS  

• Experience working within the guidelines of the US Department of Agriculture and Child and Adult Care Food Program (USDA/CACFP)
• Two or more years of experience working in a school (preschool, early childhood education, daycare, or K-12 environment) or similar kitchen setting
• Working knowledge of food allergens, intolerances, preferences, and accommodations
• Prior experience as an Assistant Teacher in a preschool setting
• Associate’s degree in Early Childhood Education or two years of post-secondary coursework in Early Childhood Education
• Experience with Montessori pedagogy
• Experience with children with special needs
• Fluent in Spanish

RESPONSIBILITIES

NOTE: The combination of responsibilities may vary based on the needs of the school site, students, and prior experiences of the Food Service Assistant.

Food Service and Site Operations

• Place weekly food orders with the vendor based on student attendance trends and food waste analysis
• Receive and verify daily food deliveries to ensure accuracy with order quantities and alignment with the approved menu. If meals are non-compliant, follow the Emergency Food SOP
• Manage all aspects of routine vendor performance to ensure the vendor is meeting or exceeding expectations
• Ensure all meals served to students are compliant and document any menu changes on menu
• Track food consumption and waste daily to ensure food costs remain as lean and efficient as possible
• Prepare and serve meals and utensils to classrooms for each scheduled meal service
• Maintain compliance with strict food hygiene and safety protocols at all times and maintain compliance with all state and local jurisdictional requirements
• Ensure the kitchen, equipment, serving utensils, cookware, and dishes are consistently cleaned, sanitized, and well-maintained
• Manage and organize food inventory, including proper labeling, dating, rotating stock, and discarding items nearing expiration in accordance with food safety guidelines
• Record and log food temperatures prior to each meal service to ensure compliance with safety regulations
• Accommodate children’s special dietary needs, including allergies, medical restrictions, and cultural or religious food requirements
• Assist in serving meals during family engagement and school events as needed

Added responsibilities if food is prepared on-site:

• Place weekly groceries orders based on the menu and current inventory
• Receive and verify food delivery and follow up with vendor if food delivered is incorrect based on the order or spoiled
• Prepare meals according to the planned menu and adapt recipes for dietary restrictions (allergies, religious diets, vegetarian, etc.)
• Prepare meals on a schedule (breakfast/lunch/snack)
• Adapt the menu (make substitutions) to avoid food spoilage and waste following the Menu Substitution SOP
• Help plan menus that are nutritious, budget-friendly, and appealing to students

Added responsibilities if school is under CACFP:

• Ensure vendor provides a delivery receipt and keep it for 3 years
• Children receive the appropriate portion sizes for each meal pattern component by providing correctly sized serving utensils and clearly communicating the required serving sizes to classroom staff upon meal delivery
• Review meal counts for accuracy and upload into SharePoint weekly
• If there are any menu substitutions, provide the necessary menu-supporting documentation (CN label, product formulation statement, Nutrition Facts, standardized recipe)
• Attend the required annual sponsor CACFP training that includes meal pattern, reimbursement, meal counts, claims, recordkeeping, and civil rights
• Clock in/out of Workday based on food-related responsibilities

Classroom Support

• Provide classroom coverage as needed
• Assist teachers with the full implementation of Bezos Academy’s performance standards, policies, and procedures
• Support Bezos Academy classrooms by following regulations and guidelines in the day-to-day operation of the classroom (i.e., cleaning materials, meal prep, nap time transitions, etc.)
• Organize materials and clean the workspace to facilitate the learning process for each child
• Support children’s increasing independence with daily living skills (i.e., washing hands, using the bathroom, eating meals and snacks, cleaning up, etc.)
• Provide 1:1 support for children who are experiencing big feelings
• Develop positive relationships with children

Other

• Assist the Head of School and school staff in other operational duties in the school as necessary when the kitchen work is complete (e.g., support with laundry, front desk support, and other duties as assigned by the Head of School)
• Participate in team meetings, center activities, and staff development

Bezos Academy participates in E-Verify and will provide the federal government with employee Form I-9 Information to confirm authorization to work in the U.S. Bezos Academy only uses E-Verify once a candidate has accepted a job offer and completed the Form I-9. If E-Verify cannot confirm that an employee is authorized to work, Bezos Academy will give the employee written instructions and an opportunity to contact the Department of Homeland Security (DHS) or Social Security Administration (SSA) so the employee can begin to resolve the issue before any adverse employment action is taken. For more information about your right to work, please see the Notice of Right to Work.

As a Manager, Data Center Operations, you'll help us scale our Core Data Center and hardware infrastructure at a time of incredible growth for our business. At Roblox, you'll have boundless opportunities to shape the future of the Imagination Platform™ and demonstrate your passion for delivering thoughtful solutions in front of a global audience. If you know what it takes to build and operate hardware infrastructure that can sustain millions of concurrent players year-round and you take play as seriously as we do, you'll fit right into our highly experienced and ever-expanding engineering team. You will report to the Senior Manager of Data Center Operations. This will be a position based in Goodyear, AZ.

You will:

• Develop and maintain the Core Data Center and hardware infrastructure to meet the large-scale and real-time requirements of our Imagination Platform™ to ensure our community has an awesome experience anywhere in the world. This includes all aspects of the server, network infrastructure, power, and environmental monitoring.
• Lead a growing team of data center engineers focusing on rack deployments, hardware troubleshooting and break-fix, and decommissioning.
• Identify and solve critical problems and prevent them from re-occurring via root cause analysis and giving recommendations to improve automation. Guide, train and educate staff on best practices related to break/fix tasks related to the server hardware and network infrastructure.
• Create, influence, and improve the development platform, infrastructure, metrics, standards (Runbooks, SOPs, MOPs), and methods to ensure the goal of scalability and high availability can be achieved.
• Participate in the on-call rotation for our critical infrastructure.
• Build and implement Core sites around the world including low voltage cabling, creating BOMs, vendor management.

You have:

• At minimum 10+ years of experience working in large-scale Data Center Infrastructure environments and 3+ years experience leading a team of 3 or more data center engineers. While supporting the operations team, you are also expected to also perform as an individual contributor.
• Extensive experience installing, monitoring, and maintaining server and network equipment. This includes brand new server and network provisioning.
• In-depth knowledge of data center environments, servers, and network equipment.
• Proven experience executing on multiple tasks simultaneously.
• You have installed various equipment that commonly resides in the data center environment and are able to lift 75 pounds occasionally.

You are:

• Someone who is ready for action wielding a wealth of server and network hardware troubleshooting support, across multiple commercial-off-the-shelf hardware brands.
• Excited about getting in front of complex problems, and can effectively organize your work to overcome emergent high-impact issues.
• Someone who asks the right questions to solve issues within your expertise and you use data to test your theories. You are able to formulate and identify problems, generate and evaluate a variety of solutions (some of which are novel), and implement the best one(s).

Job's Mission:

As a Software Quality Assurance Engineer at ASM, you will ensure the reliability and effectiveness of our software that drives cutting-edge semiconductor processing equipment. You’ll work on testing and qualifying software, streamlining QA processes to align with CI/CD development, and collaborating with talented global teams. Your contributions will directly impact the functionality and performance of advanced hardware in the semiconductor industry.

What you will be working on:

• Design, develop, test, deploy, maintain, document, and improve software test suites.
• Perform both manual and automated testing in simulation environments and on physical semiconductor manufacturing equipment.
• Execute and analyze the functionality of engineering designs compared to intended outcomes, providing valuable feedback.
• Automate, streamline, and maintain QA processes to integrate seamlessly with CI/CD development workflows.
• Develop and implement quality standards, methods, and procedures to enhance existing business processes.
• Work closely with Process Engineering teams to test systems, validate engineering designs, and identify quality improvements.
• Create and manage tests plans and test cases, ensuring thorough validation of software enhancements and defect fixes.
• Gain an understanding of ASM system operations, including mechanical, electrical, and software functionality.
• Document testing procedures and feedback to ensure quality and consistency across projects.

What we are looking for:

• Bachelor’s + 5 years of experience, Master's +3 years OR PhD + 2 years of experience. Degree in Computer Science, Computer Engineering, or a related field.
• Proficiency in programming languages such as Python, C++, or C#.
• Experience with system quality assurance or engineering for complex electromechanical equipment with integrated software controls.
• Strong written and verbal communication skills for interacting with senior leadership and stakeholders.
• Willingness to travel up to 10% of the time.

What sets you apart

• Familiarity with tools like Jira, Confluence, Git, Test Complete, or TestRail.
• Experience in software configuration management or versioning in a software development environment.
• Knowledge of DevOps and CI/CD pipeline setup.

We’re looking for a Senior Manager, Global Accounts Receivable to strategically lead our global end to end accounts receivable function across multiple regions. This role will oversee and ensure accurate and timely accounts receivable reconciliation and reporting, collections, cash application, and credit management while driving process standardization, scalability, and compliance with applicable accounting standards (e.g., ASC 606 / IFRS 15). We are looking for a process oriented leader who can balance firm financial controls with a customer centric approach, ensuring our DSO remains low while maintaining strong business relationships.

This role is open to remote-applicants in Canada and USA (in Provinces/States where we can hire legally), unless you are near a commuting distance from our Toronto or Vancouver offices. In which case, there would be a hybrid component.

The position is available for a fixed term from June 1, 2026 to end January 2027. 

WHAT YOU’LL DO:

• Drive the global collections strategy to meet and exceed monthly and quarterly cash targets.
• Monitor aging reports and own high level escalations for delinquent accounts and vendor disputes. Analyze DSO trends and provide actionable insights and reccomendations to executive leadership.
• Oversee the daily application of payments to ensure 100% accuracy and internal control compliance
• Manage and resolve unapplied cash and payment discrepancies through cross functional collaboration.
• Manage bank reconciling items related to AR and ensure all subledger balances match the general ledger.
• Develop and maintain the company’s global credit and collections policy.
• Evaluate the creditworthiness of new and existing customers using financial statements, D&B reports, and trade references.
• Establish and review credit limits and payment terms to mitigate financial risk and bad debt exposure.
• Oversee the AR month end close process, including the preparation of journals, accruals, and bad debt reserves.
• Prepare monthly AR financial health dashboards and reports and present findings to leadership.
• Serve as the primary point of contact for auditors regarding the global AR cycle. 
• Manage direct reports including hiring selection, coaching, mentoring, development, performance management and all other people-management practices, including DE&I. 
• Identify and implement opportunities for automation (e.g., implementing AI driven collections tools or enhancing ERP workflows).

Perform other related duties as assigned

WHAT YOU’LL NEED:

• Bachelor’s degree in Accounting, Finance, or a related field; or equivalent professional experience
• 12  years in AR/Finance, with at least 3 years in a management role.
• Proficiency in Tier 1 ERPs (e.g., NetSuite, SAP, Oracle) and advanced Excel.
• Deep understanding of GAAP and SOX compliance.
• Exceptional negotiation skills. You can be "firm but fair."
• Accountability: holds self and others accountable to meet commitments
• Commitment to Results: consistently achieves results, demonstrating high performance, and challenging self and others to deliver results
• Problem Solving: uses an organized and logical approach to find solutions to complex problems. Looks beyond the obvious to understand the root cause of problems
• Inclusive Leadership: Builds inclusive, cohesive teams which apply diversity to achieve common goals
• Play to Win: Capably delivers results through others, is good at establishing clear direction, helping others achieve their best work
• Long Range Planning: Identifies key issues and relationships relevant to achieving a long-range goal or vision; Builds an integrated plan for course of action to accomplish this vision
• Enablement: Challenges and supports others to create results but also develop new capabilities. Successfully develops the capacity and capability of team and individuals on the team

WHO YOU ARE:

• Solution seeker: You’re focused on tackling new challenges, solving problems, and moving the business forward—and you don’t wait to be asked.
• Lifelong learner: You have a growth mindset – you’re here to learn, experiment, seek, apply, and provide feedback, share what works with your team, and move on from what doesn’t.
• Resilient adapter: In the face of change and challenges, you bring a thoughtful, calm approach, and a focus on finding the new opportunity.
• Intentional collaborator. You build positive working relationships across the business, bringing people together to foster new opportunities and to facilitate the efficient flow of information.
• Critical challenger: You have the trust in your team to ask difficult questions in order to get to the best end result.
• Active communicator: You listen actively and communicate ideas and information clearly, inclusively, and proactively.
• Integrated thinker: You look beyond your role and responsibilities to understand how your team’s work drives broader organizational goals.
• Accountable owner: You take pride in the work you’re responsible for with a mindset of ultimate accountability and reliability for the outcomes.
• Bar-raiser: You step up to help your team grow and succeed, even when that means going beyond what might be expected.

#LI-AA #LI-Remote

Hi, we're Oscar. We're hiring a Director, Managed Business Services to join our team.

Oscar is the first health insurance company built around a full stack technology platform and a relentless focus on serving our members. We started Oscar in 2012 to create the kind of health insurance company we would want for ourselves—one that behaves like a doctor in the family.

About the role:

You will be the primary architect of our global outsourcing strategy and be responsible for the end-to-end health of our outsourced ecosystems. This service covers multiple contact center, business process and configuration functions and works with multiple vendors across several countries. This strategic leadership role designs, implements, and governs external operations to ensure they align with company quality and compliance standards, cost objectives, and customer experience goals.

You will report into the SVP, Insurance Operations

Work Location: This position is based in our Tempe, Arizona office, requiring a hybrid work schedule with 3 days of in-office work per week. Thursdays are a required in-office day for team meetings and events, while your other two office days are flexible to suit your schedule. #LI-Hybrid

Pay Transparency: The base pay for this role is: $147,549 - $193,658 per year. You are also eligible for employee benefits, participation in Oscar's unlimited vacation program, company equity grants, and annual performance bonuses.

Responsibilities:

• Lead the ongoing analysis and cross-functional framework to determine which business functions are optimized for outsourcing versus internal retention.
• Design and execute an operating model that supports scalability, ongoing risk mitigation, and the execution of critical business initiatives across a matrixed organization.
• Drive core business transformation by identifying emerging marketplace trends and shifting the outsourcing model from transactional tasks to transformational outcomes.
• Align service provider visions with long-term corporate goals to ensure flexibility and growth as market demands change.
• Drive the end to end selection process, in partnership with Procurement and operational leaders, including RFP leadership, vendor vetting, and onboarding of partners that align with company scale and culture.
• Partner closely with Procurement to identify and execute optimal Master Service Agreements (MSAs) and Statements of Work (SOWs) while monitoring value delivery and ROI.
• Negotiate matters of significance with senior management and external executives to ensure favorable commercial terms and operationally effective programs.
• Ensure the establishment and monitoring of rigorous Service Level Agreements (SLAs) and Key Performance Indicators (KPIs) focused on financial accuracy, productivity, and member experience.
• Perform ongoing operational governance by preparing consolidated performance reports that provide actionable insights and root-cause identification for issues.
• In partnership with finance, track ROI on outsourcing initiatives. Ensure meticulous billing analysis and the identification of opportunities for long-term cost savings.
• Set and enforce rigorous standards for all offshore and nearshore sites to ensure total adherence to HIPAA, CMS regulations, SOC2, and data privacy requirements.
• Partner with internal Audit, Security, and Compliance departments to lead the operational response to any vendor-side audits or data incidents.
• Lead the transition and change management of new work streams, including the creation of documentation, training protocols, and workflow design.
• Act as the primary bridge between internal departments and external partners to ensure seamless knowledge transfer and brand consistency.
• Create an attractive value proposition for vendor staff to minimize turnover, preserve institutional knowledge, and ensure external teams are educated on company priorities.

Requirements:

• Bachelor's Degree in Business, Operations or relevant field
• 10+ years in Insurance Operations
• 8+ years working with teams in multiple locations and within multiple disciplines
• 8+ years of coaching and developing leading cross-functional people and teams
• 6+ years of experience in LEAN, Six Sigma, or other improvement methodologies
• 6+ years of experience leading large-scale implementations or expansion implementations across multiple site locations or business units
• 5+ years of experience in procurement processes, including negotiating and contracting BPO services
• 5+ years managing 3rd-party BPO/ITO relationships for major functions in insurance operations.
• Strong legal and commercial acumen with experience in multi-million dollar contract negotiations.
• Ability to influence internal/external and onshore/offshore leadership

Bonus points:

• MBA or relevant advanced degree
• 10+ years of experience on Insurance Payer side
• Advanced experience with Procurement or Contract Management functions
• Advanced experience in healthcare
• Experience managing international teams across different time zones (APAC, LATAM, EMEA).
• Proven track record of scaling an outsourcing program from "scratch" to a global footprint.

how fairlife Nourishes You

At fairlife, we believe in better — and that includes how we support our people. We offer a comprehensive suite of benefits and well-being resources designed to support you physically, emotionally, socially, and financially, both in and out of work.

• Comprehensive medical, dental, and vision coverage
• Supplemental health plans (hospital indemnity, accident, and critical illness insurance)
• Paid Time Off to recharge and support work-life balance
• Paid parental leave & adoption assistance (up to $10,000)
• Parental support & family care benefits, including childcare resources and lactation support
• 401(k) to support retirement planning with up to 9% in employer match
• Wellness reimbursement (up to $500 for qualified wellbeing expenses)
• Employee Assistance Program (EAP) for emotional wellbeing and work-life support
• Company-paid life insurance and short-term disability
• Employer HSA funding (for HDHP participants)
• Tuition reimbursement (up to $10,000) and student loan repayment ($200/month)
• Learning & development programs to unlock your full potential
• Rewards & recognition, matching gifts, free product, and Business Resource

About the Role

We are seeking a skilled and dependable Instrument Controls Technician (ICT) to join our milk processing and packaging engineering team. In this role, you will be responsible for the installation, calibration, maintenance, and troubleshooting of instrumentation and control systems that keep our production lines running safely, efficiently, and in full compliance with food safety regulations. 

Shift schedule: 12 Hour Nights This is a night shift position, with hours from 6:00 PM to 6:00 AM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday.

Key Responsibilities

Instrumentation & Calibration

• Calibrate and maintain field instruments including temperature sensors (RTDs, thermocouples), pressure transmitters, flow meters, level sensors, and pH/conductivity analyzers
• Perform scheduled and corrective calibration using certified test equipment and maintain accurate calibration records
• Inspect, test, and service control valves, actuators, and automated valve assemblies used in processing, CIP, and filling systems

Process Control Systems

• Support and troubleshoot PLC based control systems on the Processing and Packaging lines
• Assist in PID troubleshooting and optimization to maintain critical process parameters (temperature, pressure, flow)
• Perform HMI and SCADA alarm management and support system upgrades

Maintenance & Troubleshooting

• Diagnose and repair instrumentation and control failures on filling lines, blow molders, cappers, labelers, and conveyors
• Diagnose and repair VFD, Servo, motor and pump failures
• Respond to production trouble calls and minimize unplanned downtime
• Collaborate with maintenance, operations, and quality teams to resolve recurring equipment issues

Food Safety & Sanitary Standards

• Assist with maintaining and verifying critical process recording devices
• Support SIP (sterilize-in-place) and CIP (clean-in-place) system instrumentation integrity
• Participate in internal audits, HACCP reviews, and regulatory inspections

Safety & Compliance

• Follow all LOTO/LOTO procedures, confined space protocols, and permit-to-work systems
• Work safely in wet, cold, and sanitary environments consistent with GMP requirements
• Adhere to OSHA regulations and facility safety programs

Documentation

• Update electrical drawings, P&IDs, and instrument data following any modifications
• Maintain work orders and equipment history in CMMS (e.g., D365)
• Prepare calibration certificates and regulatory compliance records

Qualifications

Required

• 3+ years of experience as an Instrument Technician in a food, beverage, or dairy manufacturing environment
• Proficiency with HART communicators and calibration tools (Fluke, or equivalent)
• Working knowledge of PLCs (Allen-Bradley, Siemens) and HMI/SCADA platforms
• Ability to read and interpret P&IDs, loop diagrams, electrical schematics, and instrument data sheets
• Strong troubleshooting skills and ability to work independently under pressure

Preferred

• Associate's degree or technical certification in Instrumentation, Electronics, or Industrial Automation
• Experience with Rockwell Studio 5000, FactoryTalk, Siemens or similar platforms
• Knowledge of CIP/SIP system controls and automated valve sequencing
• Knowledge of communications protocols (e.g., Ethernet/IP, Profinet, AS-i, Modbus )
• NICET certification or equivalent instrumentation training
• Experience supporting regulatory inspections (FDA, USDA, or state dairy authority)

Work Environment & Physical Requirements

• Standing for extended periods is common along with sitting, kneeling, crouching, bending, reaching, crawling, climbing, grasping, lifting and carrying
• Work performed in processing and packaging areas — exposure to wet, noisy conditions
• Ability to lift to 50 lbs., climb ladders, and work at heights
• Must be able to wear required PPE including Arc Rated clothing, hearing protection, safety glasses, and slip-resistant footwear
• Availability for 12-hour shift work and OT during planned maintenance
• May be required to operate a man lift or forklift.  Certification is available.

Food Safety Requirements

• Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety.
• Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas.
• Perform all duties necessary to meet Company, Customer and/or Government requirements/standards as prioritized by the Company.
• Ability to initiate action to prevent the occurrence of nonconformities relating to Food Safety and the Quality of the product, processes, quality system, or safety system.
• Identify and record any problems relating to Food Safety and the Quality of the ingredients, processes, quality system, or safety system.
• Control further processing or delivery of nonconforming product in terms of Food Safety and Quality issues until the deficiency or unsatisfactory condition has been corrected.
• In the event of absence, another employee with the same skill level will assume the duties and responsibilities as required.

position location: Goodyear, AZ

reports to: Automation Engineering Department

itD is seeking a Project Manager to lead execution of global supply chain planning transformation initiatives, with a strong emphasis on leveraging Artificial Intelligence (AI) to enhance planning processes, improve decision-making, and deliver measurable business value. This role plays a key part in shaping the company's future supply chain planning capabilities by driving cross-functional delivery, ensuring alignment to strategic objectives, and enabling innovation across a complex global environment. The ideal candidate will bring strong project management expertise, experience delivering large-scale cross-regional initiatives, and familiarity with AI-driven transformation efforts.

Location: Remote anywhere in the United States (preference for RTP or SJC campuses)

We provide comprehensive medical benefits, a 401k plan, paid holidays, and more. Please note that we are only considering direct W2 candidates at this time, as we are unable to offer sponsorship.

Responsibilities:

• Lead end-to-end execution of projects across multiple global teams to deliver approved outcomes
• Develop, maintain, and manage detailed project plans including schedules, resources, and budgets
• Coordinate global supply chain planning operations across cross-functional stakeholders
• Manage vendor accountability and ensure delivery aligns with project scope and expectations
• Track project progress, identify risks, and implement corrective actions as needed
• Facilitate stakeholder communications and manage expectations across global teams
• Utilize project management tools such as Microsoft Project Online, Asana, Miro, Jira, or similar platforms to track and report status

Internal Responsibilities:

• Attend regular internal practice community meetings
• Collaborate with your itD practice team on industry thought leadership
• Complete client case studies and learning material (blogs, media material)
• Build out material to contribute to the Digital Transformation practice
• Attend internal itD networking events (in person and virtual)
• Work with leadership on career fast-track opportunities

Required Qualifications and Skills:

• 3+ years of experience in project management delivering complex, cross-functional, multi-region projects
• Strong organizational, leadership, and stakeholder management skills
• Experience managing project timelines, budgets, and execution across global teams
• Proficiency with project management tools such as Microsoft Project Online, Asana, Miro, or Jira
• Strong communication, analytical, and problem-solving skills
• Experience working in structured project delivery methodologies (Agile, Waterfall, or hybrid)
• Bachelor’s degree in Business, Supply Chain Management, Engineering, Computer Science, or a related field

Preferred Qualifications and Skills:

• Experience supporting or leading AI-driven transformation initiatives
• Familiarity with AI concepts including machine learning, predictive analytics, and natural language processing
• Experience in supply chain planning environments including demand forecasting, supply planning, inventory management, or S&OP
• Experience working within large-scale global transformation programs
• Ability to influence and align stakeholders across diverse global teams and cultures

Education:

• Bachelor’s degree in Business, Supply Chain Management, Engineering, Computer Science, or a related field required; equivalent work experience considered

Cranial Technologies is the only company in the world completely dedicated to researching and treating plagiocephaly (commonly called flat head syndrome). With over 300,000 babies successfully treated, we are the plagiocephaly experts and the leader in pediatric cranial shaping orthoses. 

Cranial Technologies, located in Tempe, AZ manufactures the DOC Band®, a cranial orthotic product that is custom-made to each baby’s head. The DOC Band® is the first FDA approved head band to correct cranial asymmetry.

We are looking for a Manufacturing/Assembly/Warehouse Team Member to join our team! Bring your strong visual skills, attention to detail, and ability to work with your hands to Cranial Technologies and impact the lives of babies each day! We're looking for a driven individuals with a keen eye for detail who are flexible to join our growing team in the manufacturing of our DOC Band®.

In this role you are playing an integral part in the fabrication process of our DOC Band®, a custom-made, cranial orthotic product for babies to correct cranial asymmetry.

Based on the position we have available, you could be hired for any our fantastic manufacturing teams: HAAS Milling Operation, Vacuum Forming, Finishing, or Shipping. You’ll be working with a dynamic group of employees who are passionate about the work they do and are dedicated to the babies we treat. Our team members enjoy working in an invigorating environment, have an interest in learning in a collaborative setting, and most of all bring a positive attitude!

In addition to being part of the team that manufactures the DOC Band®, we offer an outstanding work environment:

• Work Monday - Friday, with no shift work, no nights, and rare weekend work. (Typical schedule is Monday - Friday 5:00AM - 1:30PM or 5:30AM - 2:00PM) 
• We will train you to perform the work and help make you successful in the position with a typical 4-6 week training period.
• Work inside (in the A/C) our fabricating area located in Chandler. It is one of the cleanest in Arizona!

Qualifications:

• High School Diploma or equivalent.
• Ability to work a full time position
• Attention to detail
• Team work and desire to be flexible as well as ability to work independently
• Experience in Manufacturing, Production, or Assembly is a bonus, but not required. We will train you! 

Benefits Package:

• Medical, Vision, and Dental Insurance
• 401k Retirement Plan with a Matching Program
• 3.5 Weeks Paid Time Off plus 7 company-paid Holidays
• Life Insurance
• Short/Long Term Disability Insurance
• Position starts at $17 an hour with opportunity to increase based on your performance! 

Manufacturing Facility Address: 

6511 W Frye Rd, 

Chandler, AZ 85226

Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time.

You will receive a confirmation email stating your application has been submitted. Once your application has been reviewed, you should receive an update on your status via email. **Please keep an eye on your spam and junk mail**

Please no phone calls to the clinic or offices regarding the position.

If you are unable to submit your application, please email the recruiting department at careers@cranialtech.com for assistance.

#LI-Onsite 

Cranial Technologies is the only company in the world completely dedicated to researching and treating plagiocephaly (commonly called flat head syndrome). With over 300,000 babies successfully treated, we are the plagiocephaly experts and the leader in pediatric cranial shaping orthoses. 

Cranial Technologies, located in Tempe, AZ manufactures the DOC Band®, a cranial orthotic product that is custom-made to each baby’s head. The DOC Band® is the first FDA approved head band to correct cranial asymmetry.

We are looking to add a Fabrication Technician to join our Milling/Trim-Lines team in our Manufacturing department! Bring your strong visual skills, attention to detail, and ability to work with your hands to Cranial Technologies and impact the lives of babies each day! We're looking for a driven individuals with a keen eye for detail who are flexible to join our growing team in the manufacturing of our DOC Band®. Experience operating CNC Mills or HAAS Mills is a plus, but not a requirement as we offer a fantastic training program.

Our most successful hires have come from backgrounds in Machine Shops, Plumbing, Carpentry, Construction, or other Craftsman Trades!

You’ll be working with a dynamic group of employees who are passionate about the work they do and are dedicated to the babies we treat. Our team members enjoy working in an invigorating environment, have an interest in learning in a collaborative setting, and most of all bring a positive attitude!

In addition to being part of the team that manufactures the DOC Band®, we offer an outstanding work environment:

• Work Monday - Friday, with no shift work, no nights, and rare weekend work. (Typical schedule is Monday - Friday 5:00AM - 1:30PM or 5:30AM - 2:00PM) 
• We will train you to perform the work and help make you successful in the position with a typical 4-6 week training period.
• Work inside (in the A/C) our new fabricating area located in Chandler. It is one of the cleanest in Arizona!

Qualifications: 

• High School Diploma or equivalent
• Excellent ability to work with your hands
• Visual skills & attention to detail
• Ability to stand for long periods of time
• Experience with CNC Mills, HAAS Mini-Mills or VF2 Mills is a bonus, but not required.
• Previous experience in a manufacturing environment is a plus, but we can train you to be successful in the milling department regardless of your experience.

We offer an excellent benefits package:

• Medical, Vision, and Dental Insurance
• 401k Retirement Plan with Company Match
• 3.5 Weeks Paid Time Off plus 7 company paid Holidays
• Life Insurance
• Short/Long Term Disability Insurance
• Position starts at $17 an hour with opportunity to increase based on your performance! 

Manufacturing Facility Address: 

6511 W Frye Rd, 

Chandler, AZ 85226

Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time.

You will receive a confirmation email stating your application has been submitted. Once your application has been reviewed, you should receive an update on your status via email. **Please keep an eye on your spam and junk mail**

Please no phone calls to the clinic or offices regarding the position.

If you are unable to submit your application, please email the recruiting department at careers@cranialtech.com for assistance.

#LI-Onsite 

Cranial Technologies is the only company in the world completely dedicated to researching and treating plagiocephaly (commonly called flat head syndrome). With over 300,000 babies successfully treated with the DOC Band®, we are the plagiocephaly experts and the leader in pediatric cranial shaping orthoses. 

Cranial Technologies also provides treatment with EarWell® to correct infant ear shapes without surgery. With over 600,000+ successful outcomes, EarWell® is a proven, non-invasive treatment option for families.   

We are currently looking for a full-time Bilingual New Patient Coordinator (Remote) to join our rapidly growing team!

This role will be supporting our sales and intake team by handling inbound faxed referrals (warm leads) and website contact forms for a pre-determined region of clinics. The expectations will be around converting these leads to scheduled consults. This is not a queue-based role.

Responsibilities include:

• Make outbound calls and use other engagement / communication vehicles to schedule new patients with first touch within 24 hours of receipt
• Answer questions about the treatment in easy-to-understand ways
• Help parents understand what makes Cranial Technologies different from the competition and communicate the benefits of treating with Cranial Technologies vs the competition
• Address and overcome objections from families
• Coordinate with territory sales reps on unresponsive or declined leads

Requirements:

• High School Diploma or equivalent required
• Bilingual in Spanish and English
• 2-3 years of customer service experience, preferably in an environment connecting with warm leads, customer retention, or quota-based goals
• Exceptional communication and human relations skills in working with patients and co-workers from different backgrounds
• Energetic and enthusiastic personality
• Ability to manage details and strong organization skills

We offer an excellent benefits package: 

• Medical, Vision, and Dental Insurance
• 401k Retirement Plan
• Flex Spending Plans
• 3.5 Weeks Paid Time Off plus 7 paid Holidays
• Life Insurance
• Short/Long Term Disability Insurance
• The pay for this position is $21.00 per hour plus additional bonuses based on performance

Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time.

Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records.

You will receive a confirmation email stating your application has been submitted. Once your application has been reviewed, you should receive an update on your status via email. **Please keep an eye on your spam and junk mail**

Please no phone calls to the clinic or offices regarding the position.

If you are unable to submit your application, please email the recruiting department at careers@cranialtech.com for assistance

#LI-Remote

Your Impact

As a Manager, Solutions Architects, you’ll lead a team focused on delivering technical excellence in solution architecture across Axon’s Real-Time Operations (RTO) offerings. Partnering closely with the Sr. Manager and cross-functional teams, you'll implement and scale high-quality solution design processes while providing strategic support for mission-critical, customer-facing engagements.

You will spend approximately 80% of your time leading the team and managing project delivery across your group, and 20% supporting complex or unique client engagements with technical depth, particularly in emerging or highly integrated deployments. 

Location: Remote. 30% travel required. 
Must be within commutable distance to one of our Hub locations listed below
(Scottsdale AZ, Seattle Washington, Boston MA, Denver CO, Atlanta GA)
Reports to: Sr. Manager, Solutions Architects
Direct Reports: 8-10 Solutions Architects

What You’ll Do

• Lead and develop a team of Solutions Architects focused on law enforcement, campus, and corrections customers.
• Provide technical and project guidance to team members and ensure consistent quality and productivity in solution delivery.
• Coach and mentor team members, fostering a culture of innovation, learning, and accountability.
• Analyze and review IT system architectures to scope and recommend technical solutions.
• Partner with customers and internal stakeholders (sales, account management, product, engineering) to ensure successful project implementation and integration.
• Participate in hiring and onboarding of new Solutions Architects.
• Ensure timely and effective project execution aligned with Axon’s solution architecture standards.
• Maintain responsibility for team performance, resource allocation, and stakeholder satisfaction.
• Champion continuous process improvement in architecture, customer delivery, and team operations.

What You Bring

• Bachelor’s degree or equivalent experience.
• 4–6 years of experience in solution architecture or related technical leadership roles.
• 1–3 years of direct supervisory or team leadership experience.
• Expertise in solution architecture frameworks, cloud technologies, and systems integration.
• Effective communication skills across technical and non-technical audiences, including clients.
• Experience in project management and business process analysis.
• Basic understanding of integration coding methodologies.
• Experience in the public safety sector preferred (e.g., RMS/CAD implementations).
• Must pass a Criminal Justice Information Services (CJIS) background check and maintain CJIS clearance

Benefits That Benefit You

• Competitive salary and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• And yes, we have snacks in our offices

Benefits listed herein may vary depending on the nature of your employment and the location where you work

Your Impact

As a Manager, Solutions Architects, you’ll lead a team focused on delivering technical excellence in solution architecture across Axon’s Real-Time Operations (RTO) offerings. Partnering closely with the Sr. Manager and cross-functional teams, you'll implement and scale high-quality solution design processes while providing strategic support for mission-critical, customer-facing engagements.

You will spend approximately 80% of your time leading the team and managing project delivery across your group, and 20% supporting complex or unique client engagements with technical depth, particularly in emerging or highly integrated deployments. 

Location: Remote. 30% travel required. 
Must be within commutable distance to one of our Hub locations listed below
(Scottsdale AZ, Seattle Washington, Boston MA, Denver CO, Atlanta GA)
Reports to: Sr. Manager, Solutions Architects
Direct Reports: 8-10 Solutions Architects

What You’ll Do

• Lead and develop a team of Solutions Architects focused on law enforcement, campus, and corrections customers.
• Provide technical and project guidance to team members and ensure consistent quality and productivity in solution delivery.
• Coach and mentor team members, fostering a culture of innovation, learning, and accountability.
• Analyze and review IT system architectures to scope and recommend technical solutions.
• Partner with customers and internal stakeholders (sales, account management, product, engineering) to ensure successful project implementation and integration.
• Participate in hiring and onboarding of new Solutions Architects.
• Ensure timely and effective project execution aligned with Axon’s solution architecture standards.
• Maintain responsibility for team performance, resource allocation, and stakeholder satisfaction.
• Champion continuous process improvement in architecture, customer delivery, and team operations.

What You Bring

• Bachelor’s degree or equivalent experience.
• 4–6 years of experience in solution architecture or related technical leadership roles.
• 1–3 years of direct supervisory or team leadership experience.
• Expertise in solution architecture frameworks, cloud technologies, and systems integration.
• Effective communication skills across technical and non-technical audiences, including clients.
• Experience in project management and business process analysis.
• Basic understanding of integration coding methodologies.
• Experience in the public safety sector preferred (e.g., RMS/CAD implementations).
• Must pass a Criminal Justice Information Services (CJIS) background check and maintain CJIS clearance

Benefits That Benefit You

• Competitive salary and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• And yes, we have snacks in our offices

Benefits listed herein may vary depending on the nature of your employment and the location where you work

Your Impact

As a Manager, Solutions Architects, you’ll lead a team focused on delivering technical excellence in solution architecture across Axon’s Real-Time Operations (RTO) offerings. Partnering closely with the Sr. Manager and cross-functional teams, you'll implement and scale high-quality solution design processes while providing strategic support for mission-critical, customer-facing engagements.

You will spend approximately 80% of your time leading the team and managing project delivery across your group, and 20% supporting complex or unique client engagements with technical depth, particularly in emerging or highly integrated deployments. 

Location: Remote. 30% travel required. 
Must be within commutable distance to one of our Hub locations listed below
(Scottsdale AZ, Seattle Washington, Boston MA, Denver CO, Atlanta GA)
Direct Reports: 8 - 10 Solutions Architects

What You’ll Do

• Lead and develop a team of Solutions Architects focused on law enforcement, campus, and corrections customers.
• Provide technical and project guidance to team members and ensure consistent quality and productivity in solution delivery.
• Coach and mentor team members, fostering a culture of innovation, learning, and accountability.
• Analyze and review IT system architectures to scope and recommend technical solutions.
• Partner with customers and internal stakeholders (sales, account management, product, engineering) to ensure successful project implementation and integration.
• Participate in hiring and onboarding of new Solutions Architects.
• Ensure timely and effective project execution aligned with Axon’s solution architecture standards.
• Maintain responsibility for team performance, resource allocation, and stakeholder satisfaction.
• Champion continuous process improvement in architecture, customer delivery, and team operations.

What You Bring

• Bachelor’s degree or equivalent experience.
• 4–6 years of experience in solution architecture or related technical leadership roles.
• 1–3 years of direct supervisory or team leadership experience.
• Expertise in solution architecture frameworks, cloud technologies, and systems integration.
• Effective communication skills across technical and non-technical audiences, including clients.
• Experience in project management and business process analysis.
• Basic understanding of integration coding methodologies.
• Experience in the public safety sector preferred (e.g., RMS/CAD implementations).
• Must pass a Criminal Justice Information Services (CJIS) background check and maintain CJIS clearance

Benefits That Benefit You

• Competitive salary and 401k with employer match
• Discretionary paid time off
• Paid parental leave for all
• Medical, Dental, Vision plans
• Fitness Programs
• Emotional & Mental Wellness support
• Learning & Development programs
• And yes, we have snacks in our offices

Benefits listed herein may vary depending on the nature of your employment and the location where you work