Quality Manager
Qualastat Electronics | Chandler, AZ

Compensation: $90,000 – $115,000 (DOE) + bonus potential

About Us

Qualastat Electronics, a Trexon company, is a growing aerospace and defense manufacturer specializing in high-reliability cable and wire harness assemblies. We take pride in doing it right the first time and supporting critical applications where quality is non-negotiable.

We are seeking a hands-on Quality Manager to lead our Quality function and drive compliance, accountability, and continuous improvement across the organization.

Position Summary

The Quality Manager is responsible for overseeing the Quality Management System (QMS) to ensure compliance with AS9100, internal standards, and customer requirements. This role leads the quality team, manages audits and corrective actions, and partners closely with Engineering and Production to drive measurable improvements in quality and performance.

This position plays a critical role in maintaining certification, reducing defects, and ensuring customer satisfaction in a fast-paced aerospace manufacturing environment.

What Success Looks Like

• Maintain AS9100 certification with successful audit outcomes
• Reduce internal defects, rework, and cost of poor quality (COPQ)
• Improve customer quality performance (scorecards, escapes, RMAs)
• Drive timely and effective corrective actions (internal and external)
• Build a strong, accountable, and capable quality team

Key Responsibilities

Quality Oversight & Compliance

• Manage and maintain the QMS in compliance with AS9100 and customer requirements
• Ensure execution of inspections, audits, and quality controls
• Oversee NCRs, RMAs, FAIs, and engineering change activities
• Lead internal and external audits, including customer and registrar audits
• Ensure adherence to specifications, procedures, and regulatory requirements
• Support contract review and risk assessment processes

Customer & Supplier Quality

• Serve as primary point of contact for customer quality interactions
• Manage customer audits, corrective actions (SCARs), and scorecards
• Partner with suppliers to resolve quality issues and improve performance

Team Leadership & Development

• Lead, coach, and develop Quality Inspectors, Engineers, and Test Technicians
• Manage hiring, onboarding, and performance management within the department
• Ensure proper staffing and coverage to meet production demands
• Promote a culture of accountability and continuous improvement

Corrective Actions & Continuous Improvement

• Lead root cause analysis and corrective/preventive action efforts
• Implement sustainable improvements to reduce defects and variation
• Drive process improvements in collaboration with Production and Engineering

Reporting & Metrics

• Track and report KPIs to leadership (scrap, rework, FPY, customer returns, etc.)
• Provide data-driven insights to support operational and strategic decisions

Minimum Qualifications

Education & Experience

• 7+ years of quality experience in a manufacturing environment
• 2+ years of leadership or supervisory experience preferred
• Experience in AS9100 or ISO-certified environments required

Knowledge, Skills, and Abilities

• Strong leadership and team development skills
• Ability to read and interpret engineering drawings, specifications, and MIL standards
• Working knowledge of IPC/WHMA-A-620 and J-STD-001 (certification preferred)
• Experience with root cause analysis and corrective action methodologies
• Strong understanding of quality systems, audits, and continuous improvement tools
• Proficiency in Microsoft Office and ERP systems
• Familiarity with inspection tools (calipers, micrometers, etc.)
• Strong communication and organizational skills

Why Join Us

• Growing company with strong leadership and investment in operations
• High-impact role with visibility to leadership
• Opportunity to build and shape the Quality function
• Competitive compensation and benefits

Quality Control Technician

C.E. Precision Assemblies (CEPA) | Chandler, AZ 

Compensation: $22.00 - $27.00 (DOE)

The Quality Control Technician is responsible for ensuring all products meet customer, regulatory, and internal quality requirements within an AS9100 manufacturing environment.

This role goes beyond basic inspection - it requires the ability to interpret drawings and specifications, perform detailed inspections, and own quality documentation, including AS9102 First Article Inspection Reports (FAIRs).

At CEPA, our products support critical aerospace and defense applications where precision, compliance, and traceability are non-negotiable. This role plays a key part in maintaining those standards and supporting a “do it right the first time” culture.

The ideal candidate is detail-driven, technically capable, and confident working with both physical product and documentation in a fast-paced manufacturing environment.

Key Responsibilities

Inspection & Validation

• Perform visual and dimensional inspections on cable and wire harness assemblies
• Verify compliance to customer drawings, specifications, and industry standards
• Use precision measurement tools (calipers, micrometers, etc.) to validate product requirements
• Identify and document non-conforming materials and products

Documentation & Compliance

• Create, review, and maintain AS9100 First Article Inspection Reports (FAIRs)
• Ensure accurate and complete documentation in internal systems and customer portals (e.g., Net-Inspect)
• Maintain traceability and proper recordkeeping in accordance with AS9100 standards
• Support internal and external audits, including customer audits

Cross-Functional Support

• Partner with production, engineering, and purchasing to clarify requirements and resolve quality issues
• Communicate discrepancies, risks, and corrective actions clearly and promptly
• Support root cause investigations and corrective action efforts

Continuous Improvement

• Identify opportunities to improve inspection processes, documentation accuracy, and workflow efficiency
• Assist in strengthening quality systems and standard work practices
• Promote a culture of accountability, accuracy, and continuous improvement

Qualifications

Required

• High school diploma or equivalent
• 3+ years of quality control or inspection experience in a manufacturing environment
• Experience interpreting engineering drawings, blueprints, and specifications
• Hands-on experience completing AS9100 FAIRs
• Strong attention to detail with the ability to maintain accuracy under time constraints

Preferred

• Experience in cable or wire harness manufacturing
• Familiarity with IPC/WHMA-A-620 and/or J-STD-001 standards
• Experience working in an AS9100-certified environment
• Experience with Net-Inspect or similar customer compliance systems
• Proficiency in Microsoft Excel and quality documentation systems

What You Bring

• Strong understanding of inspection techniques and quality standards
• Ability to balance speed and accuracy in a production environment
• Solid problem-solving skills and sound judgment
• Clear communication skills and ability to work cross-functionally
• Comfort working with both physical product and detailed documentation

ConexSmart's Quality Assurance Technician is the final checkpoint before products leave the facility, responsible for ensuring all products meet rigorous quality standards and specifications. Known for their keen attention to detail and technical expertise, our Quality Assurance Techs thoroughly inspect cable and wire products to confirm compliance with engineering requirements and industry standards. They possess a solid understanding of product applications and are proficient in reading and interpreting engineered drawings and blueprints.

Key duties include performing detailed inspections, documenting and reporting non-conformances, and ensuring tools like tape measures and calipers are properly calibrated and maintained. This position collaborates closely with our production teams to address quality issues promptly, ensuring continuous improvement and operational efficiency. We're searching for a solutions-driven team player who actively contributes to maintaining a high-quality manufacturing process to minimizing defects, reduce waste, and optimize production flow -- and who wants to play a role in meeting our on-time delivery goals and exceeding customer expectations.

Minimum Qualifications 

Education:

• High School diploma or GED equivalent to a high school diploma.

Experience:

• Three years’ experience in aerospace wire harness assembly, fabrication, production, aerospace manufacturing, or a similar field preferred.

Knowledge:

• Working knowledge of quality assurance processes in a manufacturing environment.
• Familiarity with ITAR Export Control compliance requirements.
• Familiarity with IPC 620
• Familiarity with AS9100D

Skills:

• Manual dexterity and attention to detail.
• Technical skills in soldering, crimping, and testing equipment.
• Strong written and verbal communication skills in English.
• Experience with quality data entry and report generation

Job Responsibilities

Quality Inspection and Documentation

• Inspect work-in-process products according to defined procedures.
• Document product non-conformities and communicate findings to the production team and QA Supervisor.

Quality Improvement Support

• Analyze non-conformance issues and perform root cause analysis.
• Assist in developing and improving quality processes.
• Suggest and implement process improvements to enhance quality and efficiency.

Data Management and Reporting

• Support quality data entry and generate reports as needed.
• Assist with product release documentation.

Other responsibilities, initiatives and ad-hoc projects as required. 

Internal and External Relationships

• Internal: Collaborates with the production team, engineering department, and quality management.
• External: May interact with external auditors or regulatory bodies to support compliance efforts.

Physical Requirements 

The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, walk, use hands, lift up to 20lbs. The noise level in the work environment is to be expected in a manufacturing facility . 

Summary

The First Electronics Corporation (FEC) specializes in the manufacture of over-molded, extra flexible, multi-conductor, fully EMI-shielded cable assemblies, harnesses and electro-mechanical assemblies’ custom built for military applications and harsh environments. FEC also produces electro-mechanical assemblies and systems for custom applications, all with no minimum quantity requirements. FEC is AS9100D and IPC/WHMA-A-620 Certified.

FEC has aggressive plans for continued growth as a world class leader in custom cable manufacturing and therefore has an immediate need for an experienced Final Inspector in the Quality Control Department.

The Quality Control Inspector is responsible for inspecting cable and wire products to ensure they meet all quality standards, specifications, and regulations. This includes performing visual inspections, and dimensional measurements. The QC Inspector must also be able to read and interpret blueprints, engineering drawings, and specifications.

The Quality Control Inspector is a respectful team-player that works well with diverse internal team members. This position is ambitious, self-motivated, results-driven, and demonstrates problem solving skills with sound judgment. This role is also responsive, flexible, accessible, detail oriented, willing to embrace change and proactively adjust plans. Partnering with and elevating others by communicating with peers to increase awareness and ensure team success.

Essential Duties and Responsibilities:

• Inspect materials, components, and final product to ensure they meet quality standards.
• Perform visual inspections of cable and wire products to identify defects.
• Measure dimensions of cable and wire products to ensure they meet specifications.
• Document the results of all inspections and tests.
• Detect and report unusual or non-conforming documentation, materials, conditions, or products to Quality Manager.
• Work with various internal personnel and departments to communicate and resolve quality issues.
• Create, update, compile, save and maintain documentation into internal database.
• When required, help with continuous improvement efforts.
• Comply with company policies and quality management system.
• Maintain and create a clean, uncluttered environment that reduces waste and optimizes productivity by following the 5S steps: sort, set in order, shine, standardize, and sustain.
• More additional responsibilities may be applicable per the Quality Manager.

Qualifications:

• High school diploma or equivalent.
• 1+ year of experience in quality control, preferably in the cable and wire manufacturing industry.
• Experience with visual inspection and dimensional measurement.
• Basic understanding of Microsoft Office and Adobe.
• Ability to read and interpret blueprints, engineering drawings, and specifications.
• Strong attention to detail.
• Ability to work independently and as part of a team.
• Strong communication skills.
• Proficient with computers and comfortable using Microsoft Office Suite (Word, Excel, etc.).

Physical Qualifications:

The physical demands described are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; stand (approximately 85% of the time); crouch; stoop; walk; talk; hear; use hands to handle or feel assemblies; reach with hands and arms for materials and tools. The employee must occasionally lift and/or move up to twenty-five (25) pounds. They must also have the ability to see details at close range (within a few feet of the observer), color vision, depth perception and ability to focus.

This position requires use of information or access to hardware and documents which are subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.

Benefit Conditions:

• Waiting period may apply
• Only full-time employees are eligible

This Job Is:

• A job for which military experienced candidates are encouraged to apply

Job Type: Full-time

Salary: $18.00 - $25.00

Benefits:

• 401(k)
• Dental insurance
• Health insurance
• Paid time off
• Vision insurance

Experience level:

• 1 year

Schedule:

• 8 hour shift
• Day shift
• Monday to Friday
• Overtime

Work setting:

• In-person

Experience:

• Blueprint reading: 1 year (Required)
• Quality control: 2 years (Preferred)

Final QC Inspector

FLSA STATUS: Non-Exempt

DEPARTMENT: Quality

SUPERVISOR:  Quality Engineering Supervisor

DIRECT REPORTS: None.

Position Summary 

This position is responsible for inspecting, testing, and sampling assembled parts or products for defects, wear, and deviations from specifications. The Final QC Inspector will conduct tests and inspections of products or processes to evaluate quality and performance, utilizing precision measuring instruments and test equipment.

Minimum Qualifications

Education:

• High school diploma, GED, or equivalent qualification preferred.
• IPC/WHMA-A-610 or 620 certification preferred.

Experience:

• Prior experience in quality inspection,

Knowledge:

• Knowledge of IPC 610 and 620, ability to read and understand customer requirements and simple customer assembly drawings
• Extensive knowledge of components, connectors, terminals and mating connectors for fixture construction

Skills:

• Ability to read wiring diagrams and engineering drawings, use of multi-meter, complex test equipment, force gages and calipers
• Must be able to read, write and speak English
• Must be able to recognize discrepancies on drawings and in customer requirements and bring them to the attention of leads, supervisors and/or management

Job Responsibilities

• Conduct basic signature testing of cables, test beeping, terminal and solder inspection, simple high voltage and ground impedance testing.
• Perform data entry and complete associated paperwork, including inspection logs.
• Conduct complex high voltage and ground impedance testing and generate new signature profiles for assemblies.
• Write first article inspection reports and complete RMA evaluations.
• Perform simple fixture repair and construction.
• Organize existing assembly files and fixture database.
• Audit shelf-life, hazardous communication (hazcom), and calibration logs.
• Calibrate Cirris Signature Testers.
• Evaluate new complex assemblies and develop inspection plans.
• Work closely with Manufacturing to identify and resolve issues with new assemblies.
• Train new inspectors and acquire information/components for future inspection requirements.
• Collaborate with Engineering and Account Management on workflow needs.
• Perform general area cleanup and organization.
• Attend appropriate training and administrative meetings.
• Work with other departments to achieve company goals.
• Utilize communication skills necessary to execute company directives.
• Perform soldering, termination, plugging of connectors, heat shrinking, and comply with ESD assembly requirements.

Other responsibilities, initiatives and ad-hoc projects as required. 

Internal and External Relationships

Internal: Works closely with the Quality Engineering Supervisor, Manufacturing, Engineering, and Account Management teams to ensure product quality and process efficiency. Collaborates with production staff to identify and resolve quality issues.

External: Interacts with customers and suppliers as needed to address quality concerns, ensure compliance with specifications, and support continuous improvement initiatives. May communicate with third-party testing agencies when required.

Physical Requirements 

The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, and sit for extended period and must have the capability to lift up to 25 pounds. They must perform repetitive tasks and they must also have the ability to see details clearly at close range (within a few feet) and have precise coordination of fingers for grasping, manipulating, or assembling small objects. Overtime may be required based on production demands. The working environment is a standard manufacturing environment. The noise level in the work environment is usually low to moderate.                        

Pay: $21-26/hr (varies based on experience)

CRE Marine, delivering subsea connectivity, designs and manufactures a range of all-metal shell connectors, fibre optic products, strain terminations, penetrators and junction boxes for extremely heavy duty use and are trusted in the most rigorous underwater applications on the planet from splash zone to full ocean depth.

The Senior QC Technician is responsible for performing advanced inspection and electrical testing activities across all stages of production, while providing technical leadership and quality oversight within the QC and Pressure Testing functions. The role supports day-to-day quality operations, drives continuous improvement initiatives, and ensures compliance with internal standards, client requirements, and ISO quality systems.

Key Responsibilities

• Performing inspections across all stages of production to ensure compliance with drawings, build instructions, work packs, and customer specifications.
• Conducting advanced electrical testing including HV AC & DC test sets, signal testing (RS232, Coax & Ethernet), bench testing, hyperbaric pressure testing, and precision measurement activities.
• Verifying completed components meet defined quality standards prior to release.
• Raising, investigating, coordinating, and supporting the timely close-out of internal, supplier, and client NCRs within the Quality Management System.
• Supporting effective root cause analysis and implementation of corrective actions.
• Carrying out in-process checks and balances on current and new processes and practices.
• Monitoring and constructively challenging adherence to Standard Operating Procedures (SOPs).
• Supporting the creation, revision, and continuous improvement of SOPs.
• Assisting in preparation for and participation in internal, client, and ISO audits (ISO 9001 & ISO 14001).
• Supporting alignment of QC and Pressure Testing activities with production goals.
• Mentoring and guiding QC Technicians, supporting competency development through QC matrices.
• Promoting safe working practices and ensuring understanding of hazards, risk assessments, Safe Systems of Work, and COSHH requirements.
• Supporting continuous improvement initiatives and actively applying 5S and LEAN principles across all work areas.
• Assisting in monitoring and reporting against defined quality objectives and KPIs.

Additional Requirements

• Undertake any other reasonable duties assigned on a temporary or permanent basis by management.
• Remain flexible and adaptable to support alternative work cells where required.
• Support cross-functional teams to meet operational and customer deadlines.

Skills

• High attention to detail and ability to work effectively under pressure.
• Strong written and verbal communication skills, including report writing.
• Ability to read and interpret manufacturing drawings, schematics, and client specifications.
• Proven experience in electrical QC within a manufacturing environment.
• Competent in the use of HV AC & DC test sets, signal testing equipment (RS232, Coax & Ethernet), hyperbaric pressure testing, and precision measurement tools.
• Experience with Quality Management Systems and NCR processes.
• Audit exposure (internal and/or external).
• Working knowledge of industry-standard QHSE requirements.
• Experience applying LEAN principles and 5S methodologies.
• Strong IT skills including Microsoft Office applications.
• Ability to mentor, support, and develop technicians.
• Ability to challenge procedures and processes constructively.

Behaviour

The Senior QC Technician will lead by example in:

• Promoting and embedding a strong quality-first culture across the business.
• Being prepared to stop and challenge unsafe actions within the workplace.
• Positively promoting the company to colleagues, customers, and suppliers.
• Setting and supporting targets to meet or exceed client expectations.
• Sharing knowledge and supporting the development of others within the department.
• Upholding and promoting all company policies and procedures.
• Demonstrating a proactive approach to continuous improvement and quality excellence.

About Us

ConexSmart’s Engineering Technician is a dynamic team player who uses math and science to solve complex technical problems in the avionics industry. This position joins a team who enjoys developing new products, providing maintenance to current products, enhancing the use and design of existing products, and improving efficiencies across the organization.

Job Summary 

This position is instrumental in managing, enhancing, and strengthening our internal Quality Management System by managing and optimizing our internal and external quality processes, procedures, and documentation. This position’s primary focus is to assist, contribute, and execute the team’s strategic plans for Quality Management System stability and improvement.  

Quality Manager is a dynamic, adaptable, open-minded problem solver with analytical, communication, and management skills suited for individual and team contribution. This position is an integral part in sustaining and improving our quality system for expansion within our current industry and penetration into new industries. This position enjoys the inherent challenges of improving and stabilizing quality management systems and manufacturing processes in a diverse, dynamic, and growing organization. This position has a strong influence on the fundamental principles of the deployed quality management system and leads many initiatives related to the enhancement of internal and external manufacturing and quality processes.

Minimum Qualifications

Education:

• Bachelor’s degree in engineering or relevant field

Experience:

• 5-10 years of experience in quality or manufacturing environment

Knowledge:

• Previous experience in the connector or wire and cable industry (preferred)
• Knowledge of ISO 9001 standards
• Knowledge of AS9100 standards (preferred)
• Ability to read drawings, specifications, acceptance test procedures, etc.
• Proficient in MS Office

Skills:

• Strong oral and written communication and presentation skills (technical and nontechnical concepts)
• Excellent leadership skills
• Excellent organizational skills
• Results-oriented with strong analytical skills
• Ability to work well independently and part of a team
• Ability to work effectively under stressful and dynamic environments
• Ability to motivate team members in a creative and effective manner

Job Responsibilities

• Direct daily operations of department, analyzing workflow, establishing priorities, developing standards, and setting deadlines.
• Manage and maintain all Quality Control documentation and all Quality Control activities.
• Interface with quality personnel at customer and supplier levels.
• Prepare for and manage quality audits, including maintaining Quality Manual and Quality Procedure manual, creating Management review, etc.
• Communicate with external quality assurance officers during on-site inspections.
• Appraise customers' requirements and ensure satisfaction.
• Perform Sales Order review, Purchase Order reviews, QA clauses, terms & conditions, special notes, specification reviews, etc.
• Participate in product design reviews to provide input on functional requirements, product designs, schedules, or potential problems.
• Develop documentation needed to support testing procedures, including data record forms, equipment logbooks, or inventory forms for New Product Introduction.
• Develop and conduct computational analysis for internal and external validation testing as necessary.
• Complete documentation needed to support testing procedures, including data record forms, equipment logbooks, and inventory forms, to ensure replicability and compliance with standards.
• Perform training as necessary in manufacturing.
• Manage customer returns.
• Perform internally driven and customer-driven Root Cause Corrective Actions and failure analysis.
• Maintain and control drawings and specifications.
• Calibrate, validate, or maintain quality control equipment as necessary.
• Maintain training and skills matrix for direct labor and management.
• Create Supplier Corrective Action Request, submit to supplier, and assess SCAR response as necessary.
• Assess discrepant material, create Discrepant Material Request, and notify Material Review Board for disposition as necessary.
• Identify root causes and applicable corrective actions related to quality issues.
• Execute quality control protocols and provide feedback to management for potential improvements.
• Provide support to other engineering areas of operation.
• Read blueprints, data, manuals, or other materials to determine specifications, inspection and testing procedures, adjustment methods, certification processes, formulas, or measuring instruments required.
• Inspect, test, or measure materials, products, installations, or work for conformance to specifications, using measuring instruments such as rulers, calipers, gauges, or micrometers, as necessary.
• Perform visual inspections of finished products and grade, classify, or sort products according to sizes, weights, colors, or other specifications as necessary.
• Conduct routine and non-routine analyses of in-process materials, raw materials, conditioning samples, finished goods, or stability samples as necessary.
• Record inspection or test data, such as weights, temperatures, grades, or moisture content, and quantities inspected or graded as necessary.
• Interpret test results, compare them to established specifications and control limits, and make recommendations on appropriateness of data for release.
• Notify supervisors or other personnel of production problems.
• Be active and engaged on the production floor and quality control area.
• 10% travel to visit and assess domestic and international customers and suppliers as necessary.
• Any additional tasks necessary to execute on the team’s strategy for operational sustainability, improvement, and optimization.

 Other responsibilities, initiatives and ad-hoc projects as required. 

Physical Requirements 

The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, and walk for extended periods and occasionally lift or move up to 25 pounds. The noise level in the work environment is usually low to moderate.

Compensation

$70,000-$90,000 annually

Position Summary 

The Quality Inspector plays a critical role in ensuring that all products meet the company’s high standards for quality and precision. This position involves inspecting components and finished products, identifying defects, and ensuring compliance with customer specifications and industry standards. 

Minimum Qualifications 

Education:

• High school diploma or equivalent; technical certification or associate degree in a related field preferred.

Experience:

• 2+ years of experience in a manufacturing or quality inspection role.

Knowledge:

• Familiarity with ISO 9001:2015 and AS9100D requirements preferred 
• Familiarity with either IPC/WHMA-A-620 preferred 
• Familiarity with AS9102 First Article Inspections preferred 

Skills:

• Strong understanding of precision measurement tools and techniques.
• Proficiency in reading and interpreting engineering drawings and blueprints.
• Excellent attention to detail and organizational skills.
• Effective communication skills and ability to work collaboratively in a team environment
• Ability to work in high mix, low volume environment

Job Responsibilities 

• Perform detailed inspections of incoming materials, in-process components, and finished products using precision measuring instruments (e.g., calipers, micrometers, tape measures).
• Interpret engineering drawings, blueprints, and specifications to ensure products meet design requirements.
• Identify and document non-conforming materials or products and provide feedback to operators.
• Maintain accurate inspection records
• Conduct First Article Inspections (FAI) in accordance with company and industry standards.
• Monitor and enforce compliance with customer workmanship standards.
• Participate in root cause analysis and recommend solutions to prevent recurring issues.
• Other duties as required

 Physical Requirements 

The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

About 603 Manufacturing

Located in Hudson, NH, 603 Manufacturing, a Trexon company, opened for business in 1998. We are an awarded manufacturer of cable assemblies and electro-mechanical assemblies. 603 Manufacturing is truly a diversified contract manufacturer, servicing the Defense, Aerospace, Industrial, Medical & Commercial industries. We offer a comprehensive benefit package including a 9/80 work schedule.

603 Manufacturing is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. 603 Manufacturing is an E-Verify Participant. Pre-employment drug/alcohol/background screening is required.

Job Title: Quality Technician
Location: Chandler, AZ
Position Type: Full-Time | 9/80 Schedule

Week 1 - Monday–Friday 6am-2pm

Week 2 - Monday-Thursday 6am-4pm

Pay - $19.00 - $25.00

Join Our Team at Qualastat – Experts in Wire Harness Manufacturing
Qualastat is seeking a detail-oriented and motivated Quality Technician to support our quality assurance efforts in wire harness manufacturing. This is a great opportunity to be part of a dedicated team focused on delivering high-quality products to aerospace and industrial customers.

Key Responsibilities:

• Perform inspections of incoming materials, in-process production, and finished wire harness assemblies
• Utilize measuring tools and inspection equipment to verify product conformity
• Maintain and review quality documentation, including inspection reports, non-conformance reports, and corrective actions
• Assist in root cause analysis and implementation of corrective/preventive actions
• Support internal audits and continuous improvement initiatives
• Calibrate and maintain inspection tools and equipment
• Manage and track limited shelf-life materials to ensure proper usage and compliance
• Ensure adherence to customer and industry standards, with knowledge of AS9100 and ISO 9001

Qualifications:

• Knowledge of AS9100 and ISO 9001 quality standards required
• Familiarity with J-STD-001 and IPC/WHMA-A-620 standards a plus
• IPC certification is a plus
• Strong attention to detail and excellent organizational skills
• Ability to read and interpret technical drawings and specifications
• Proficiency in Microsoft Word and Excel
• Prior experience in electronics or wire harness manufacturing is preferred
• Strong communication and time management skills
• Must be able to pass a background check
• Fluent in English (read, speak, and write)

Benefits:

• Medical, Dental, and Vision Insurance
• 401(k) with Company Match
• Supplemental Insurance Options
• Paid Holidays
• Generous PTO Policy
• Sick Time

Summary

The First Electronics Corporation (FEC) specializes in the manufacture of over-molded, extra flexible, multi-conductor, fully EMI-shielded cable assemblies, harnesses and electro-mechanical assemblies custom built for military applications and harsh environments. FEC also produces electro-mechanical assemblies and systems for custom applications, all with no minimum quantity requirements. FEC is AS9100D and IPC/WHMA-A-620 Certified.

FEC has aggressive plans for continued growth as a world class leader in custom cable manufacturing and therefore has an immediate need for an experienced Final Inspector in the Quality Control Department.

The Quality Control Inspector is responsible for inspecting cable and wire products to ensure they meet all quality standards, specifications, and regulations. This includes performing visual inspections, and dimensional measurements. The QC Inspector must also be able to read and interpret blueprints, engineering drawings, and specifications.

The Quality Control Inspector is a respectful team-player that works well with diverse internal team members. This position is ambitious, self-motivated, results-driven, and demonstrates problem solving skills with sound judgment. This role is also responsive, flexible, accessible, detail oriented, willing to embrace change and proactively adjust plans. Partnering with and elevating others by communicating with peers to increase awareness and ensure team success.

Essential Duties and Responsibilities:

• Inspect materials, components, and final product to ensure they meet quality standards.
• Perform visual inspections of cable and wire products to identify defects.
• Perform incoming inspections as needed, review incoming inspection documentation and scan into database.
• Identify and log incoming shelf-life material. Assist when needed with shelf-life material audits. 
• Perform in-process inspections based on schedule issued by Quality Manager. 
• When required, compile and/or review First Article Inspection Reports for wither incoming product or for product in Final Inspection. 
• When required, assist with document submissions, such as source requests, or First Article Inspection Reports. 
• Measure dimensions of cable and wire products to ensure they meet specifications.
• Document the results of all inspections and tests.
• Detect and report unusual or non-conforming documentation, materials, conditions, or products to Quality Manager.
• Work with various internal personnel and departments to communicate and resolve quality issues.
• Create, update, compile, save and maintain documentation into internal database.
• When required, help with continuous improvement efforts.
• Comply with company policies and quality management system.
• Maintain and create a clean, uncluttered environment that reduces waste and optimizes productivity by following the 5S steps: sort, set in order, shine, standardize, and sustain.
• More additional responsibilities may be applicable per the Quality Manager.

Qualifications:

• High school diploma or equivalent.
• 1+ year of experience in quality control, preferably in the cable and wire manufacturing industry.
• Experience with visual inspection and dimensional measurement.
• Basic understanding of Microsoft Office and Adobe.
• Ability to read and interpret blueprints, engineering drawings, and specifications.
• Strong attention to detail.
• Ability to work independently and as part of a team.
• Strong communication skills.
• Proficient with computers and comfortable using Microsoft Office Suite (Word, Excel, etc.).

Physical Qualifications:

The physical demands described are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; stand; crouch; stoop; walk; talk; hear; use hands to handle or feel assemblies; reach with hands and arms for materials and tools. The employee must occasionally lift and/or move up to twenty-five (25) pounds. They must also have the ability to see details at close range (within a few feet of the observer), color vision, depth perception and ability to focus.

This position requires use of information or access to hardware and documents which are subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.

Benefit Conditions:

• Waiting period may apply
• Only full-time employees are eligible

This Job Is:

• A job for which military experienced candidates are encouraged to apply

Job Type: Full-time

Salary: $18.00 - $25.00 per hour

Benefits:

• 401(k)
• Dental insurance
• Health insurance
• Paid time off
• Vision insurance

Experience level:

• 1 year

Schedule:

• 8 hour shift
• Day shift
• Monday to Friday
• Overtime

Work setting:

• In-person

Experience:

• Blueprint reading: 1 year (Required)
• Quality control: 2 years (Preferred)

Work Location: In person