Here are some of the EXCITING things you’ll get to do:

• Work with new product development team to select the best PCBA architecture for the new product development in R&D Phase.
• Define and develop PCBA requirement of electronics system in R&D Phase.
• Support Design Team to develop robust software control algorithm/logics.
• Work with PCBA supplier to develop PCBA for new product in NPD and NPI phase.
• Review PCBA design for safety, reliability and DFM in NPD and NPI phase to make sure the good design quality.
• Implement systematical problem solving approach to find root cause and make correction plan for all the issues in in NPD and NPI phase.
• Implement Design Verification Test in each EB build to evaluate robustness of PCBA design.
• Review and approve PCBA design documents in NPI and Pilot phase.
• Review and approve PCBA manufacture process and test process in NPI and Pilot phase.
• Provide engineering support to achieve best quality and best cost.

You are Expected:

• Good knowledge of design and verification for power supply, micro processer, sensor, heater and motor control etc.
• Good knowledge and skill to design Schematic, PCB layout circuit simulation and software development.
• Good knowledge of safety design to comply with UL and IEC requirement.
• Good knowledge of electronics component selection and verification.
• Good knowledge of design for reliability, DFMEA, RCA etc.
• Good knowledge of design for manufacture and PCBA manufactures process.
• Good knowledge of EMC design and test.
• Good knowledge of PCBA verification test requirement and procedure.
• Good knowledge of 6 sigma.
• Good skill on reading, writing and oral English communication.
• At least 8+ years work experience in PCBA design and manufacture for home appliance or similar electronics system.
• At least 6 years work experience in circuit design includes both analog and digital circuit.
• At least 3 years work experience of software development with C or assembly language.
• Good experience in PCBA manufacture and testing.

Education/Certifications/Affiliations

• Bachelor degree in electrical engineering or related majors.

Travel Requirements

• Be flexible for domestic and international travel.

Here are some of the EXCITING things you’ll get to do: 

• Team sport to Deliver 5 star product to consumer 

• You can design any product you want in SharkNinja 

• Pursue and provide creative idea for product 

• Communication with transnational team to achive better results for issues 

• Make things better with detail research 

• Drive incremental change 

• Challenge and be challenge 

• Improve yourself by training, lesson learn and so on 

ATTRIBUTES & SKILLS: 

Responsibilities: 

• Professionally design and develop innovative design solutions and products in a fast-paced team environment. 

• Provide solid modeling and prototype support on technology development and new product development projects. 

• Using sound engineering principles refine concepts into reliable designs that meet performance, compliance, product integrity and aesthetic requirements. 

• Design for manufacturability, for China production environments. 

• Generate part specifications, including detailed drawings and specifications. 

• Communicate design to team members and China factories. 

• Perform product prototyping and testing, write test requests and obtain quotes from internal and external sources. 

• Support continuous improvement of existing products. 

Experience required:   

• Around 5-8 years’ experience in product development in high volume consumer products, Mobile Robotic products preferred. 

• 3D CAD proficiency, design experience in multiple processes such as: plastic injection molding, die-casting, sheet metal, machining processes, and assembly processes. 

• Experience working effectively in a cross-functional team environment is essential. 

• Good knowledge of Design processes, including DFME, FEA, DFM etc. 

Education background required:  

BS in Mechanical Engineering, Electrical Engineering, Robotics or Mechatronics 

Functional Skills/Knowledge: 

• Good command of English speaking and writing. 

• Ability to work with flexible adaptable teams and processes that embrace and cope with change and uncertainty. 

• Ability to support at least multiple projects simultaneously. 

• Detail-oriented, versatile, organized, articulate and professional. 

Other Requirements：  

• Traveling to supplier factory / staying in factory is required 

• Occasional international travel to visit suppliers or other SharkNinja offices may be required. 

• Ability to work under pressure and work overtime if required at peak project times. 

Who you are

We are seeking a GSM with extensive experience in managing the sourcing and supply management of components modules and devices. This role involves identifying reliable manufacturers and suppliers, negotiating contracts, monitoring market trends, and optimizing the supply chain to ensure the availability of high-quality components while minimizing costs. This person will also collaborate with cross-functional teams to support product development, quality control, and production planning.

Key responsibilities of this role include:

• Identify and evaluate potential suppliers for components or assembly, considering factors such as quality, reliability, cost, and delivery timelines.
• Negotiate contracts, terms, and pricing agreements with suppliers to ensure favorable terms and conditions for the organization.
• Develop and maintain strong relationships with suppliers, fostering effective communication and resolving any issues or disputes that may arise.
• Collaborate with production planning teams to align component supply with production schedules avoiding shortage.
• Stay updated on industry trends, technological advancements, and market dynamics related to components used in the organization's products.
• Conduct market research and analysis to identify potential cost savings, alternative suppliers, or new component sources that meet quality standards.
• Analyze market conditions and anticipate potential disruptions or supply chain risks, proactively developing contingency plans to mitigate such risks.
• Collaborate with the quality control team to ensure that components meet the required specifications and quality standards.
• Implement and maintain quality assurance processes and procedures related to component sourcing and procurement.
• Ensure compliance with relevant regulations, industry standards, and internal policies in all component-related activities.
• Work closely with product development teams to identify component requirements for new products and support the selection of suitable components.
• Collaborate with engineering and design teams to evaluate component specifications and assist in value engineering initiatives.
• Provide support to the production team during component-related issues, shortages, or quality concerns, facilitating prompt resolution.

Qualifications of a Strong Candidate

• Degree holder in Supply Chain Management / BBA or related disciplines
• At least 5 years related procurement experience 
• Proven experience in procurement, supply chain management, or components sourcing, preferably in a manufacturing or assembly environment.
• Candidates should possess comprehensive knowledge of mobile device electronics, IoT application processors modules, battery systems, and liquid crystal display modules
• Familiarity with market dynamics and trends related to components and commodities.
• Excellent negotiation, communication, and interpersonal skills.
• Analytical mindset with the ability to interpret data, conduct market research, and make informed decisions.
• Strong organizational skills and ability to manage multiple priorities effectively.
• Attention to detail and commitment to maintaining high-quality standards.
• Fluent in English and Chinese

Who you are

We are seeking a GSM with extensive experience in managing the sourcing and supply management of components modules and devices. This role involves identifying reliable manufacturers and suppliers, negotiating contracts, monitoring market trends, and optimizing the supply chain to ensure the availability of high-quality components while minimizing costs. This person will also collaborate with cross-functional teams to support product development, quality control, and production planning.

Key responsibilities of this role include:

• Identify and evaluate potential suppliers for components or assembly, considering factors such as quality, reliability, cost, and delivery timelines.
• Negotiate contracts, terms, and pricing agreements with suppliers to ensure favorable terms and conditions for the organization.
• Develop and maintain strong relationships with suppliers, fostering effective communication and resolving any issues or disputes that may arise.
• Collaborate with production planning teams to align component supply with production schedules avoiding shortage.
• Stay updated on industry trends, technological advancements, and market dynamics related to components used in the organization's products.
• Conduct market research and analysis to identify potential cost savings, alternative suppliers, or new component sources that meet quality standards.
• Analyze market conditions and anticipate potential disruptions or supply chain risks, proactively developing contingency plans to mitigate such risks.
• Collaborate with the quality control team to ensure that components meet the required specifications and quality standards.
• Implement and maintain quality assurance processes and procedures related to component sourcing and procurement.
• Ensure compliance with relevant regulations, industry standards, and internal policies in all component-related activities.
• Work closely with product development teams to identify component requirements for new products and support the selection of suitable components.
• Collaborate with engineering and design teams to evaluate component specifications and assist in value engineering initiatives.
• Provide support to the production team during component-related issues, shortages, or quality concerns, facilitating prompt resolution.

Qualifications of a Strong Candidate

• Degree holder in Supply Chain Management / BBA or related disciplines
• At least 5 years related procurement experience 
• Proven experience in procurement, supply chain management, or components sourcing, preferably in a manufacturing or assembly environment.
• Candidates should possess comprehensive knowledge of mobile device electronics, IoT application processors modules, battery systems, and liquid crystal display modules
• Familiarity with market dynamics and trends related to components and commodities.
• Excellent negotiation, communication, and interpersonal skills.
• Analytical mindset with the ability to interpret data, conduct market research, and make informed decisions.
• Strong organizational skills and ability to manage multiple priorities effectively.
• Attention to detail and commitment to maintaining high-quality standards.
• Fluent in English and Chinese

Overview

Join our team as a Senior PCB Designer, where you will play a crucial role in shaping advanced wearable consumer electronics. By collaborating with electrical engineering hardware teams and PCB/Assembly vendors, you will refine cutting-edge PCB stack-ups, ensuring optimal design quality. Your expertise in design constraints, component placement, signal routing, and design for manufacturability will be pivotal in overcoming key challenges like component miniaturization and signal integrity.

Responsibilities

• Design complex PCBs/FPCs integrating analog, digital, RF, camera, display, audio, sensors, and power charging components specifically for wearables.
• Improve and optimize PCB/FPC design processes with hardware and PCB teams to ensure fabrication readiness.
• Manage engagements with vendors and internal teams concerning placement, routing, DFM, and Gerber reviews to uphold design standards.
• Develop and oversee comprehensive PCB documentation, including Gerber, ODB, BoM, and related drawings.
• Collaborate with hardware engineers and document control to release fab and assembly packages into the PLM system while authoring ECOs.
• Work with ECAD librarians to maintain and expand the ECAD library.

Minimum Qualifications

• Over 7 years of experience in PCB design using Cadence Allegro PCB Designer.
• Expertise in designing Rigid, Flex, and Rigid-Flex boards, including HDI design and multilayer PCB techniques like blind/buried vias and microvias.
• Proficiency in interpreting datasheets and schematics, generating netlists and constraints, and using schematics as a layout and routing reference.
• Familiarity with PLM systems such as Agile and understanding of IPC, JEDEC, IEEE standards.
• Skilled in applying layout design constraints for mixed/RF signal, high-speed signal impedance control, memory interfaces, power distribution, heat dissipation, and EMI optimization.
• Proven ability to manage all facets of PCB design, focusing on the constraints and challenges of compact wearable devices.

Preferred Qualifications

• Over 10 years of experience with PCB layout design using Cadence Allegro.
• Proven expertise in managing PCB design for high-volume consumer electronics.
• Experience in designing cost-effective consumer electronics with compact PCB footprints.
• Knowledge of EMC compliance and environmental safety standards.

BBPOS is looking for a passionate, self motivated and hard working Quality engineer to be part of a diverse, dynamic and high energy team. The work is in a highly collaborative and multi- functional environment, handling several projects at a time. The successful candidate will be an experienced Quality engineer who ideally has Mechanical, Electrical and Hardware Quality Assurance expertise and will be experienced in Quality management systems, Data analysis techniques and quality assurance methodologies. 

What you will do

This position is based in Shenzhen, requiring frequent business travel to our manufacturing partners in Vietnam and other Contract Manufacturers (CMs) across China. You will be responsible for OEM product quality from new product introduction through sustaining. Being comfortable in a rapidly evolving and dynamic environment coupled with excellent communication skills are essential to the role. You will foster and build an excellent communication and working relationship with our global Stripe partners.

• Define and implement BBPOS quality management in OEM factories.
• Establish a system of quality metrics to continually drive and supervise measurable quality at OEM.
• Manage IQC, IPQC and OQC for product quality control.
• Define and implement Quality assurance processes for our in house developed Hardware solutions (both for our Shop floor system Hardware and for BBPOS Product Test & Diagnostic bundles).
• Conduct quality system audit and quality process audit for CM maturity improvement.
• Understand product and process CTQ and implement control plans to monitor these CTQ’s and prevent quality excursions or quality incidents.
• Lead quality readiness review and monitor quality result during new product introduction builds.
• Conduct failure analysis and implement corrective actions for quality issues resolution.
• Drive the use of statistical analysis for key Quality data across the team.
• Collaborate with multi-functional peers on key business initiatives. Actively participate in these discussions in a transparent manner and bring data and value to these initiatives based on data and knowledge from your team.

Who you are

We’re looking for someone who meets the minimum requirements to be considered for the role. If you meet these requirements, you are encouraged to apply. The preferred qualifications are a bonus, not a requirements

Minimum requirements: 

• Education background from BE, BS or MS in Engineering 
• At least 8 years of experience in implementing hardware Quality assurance methodologies to prevent quality issues from sneaking out of the factory.
• Knowledge of FATP (Final Assembly, Testing, Packing) for a POS reader or similar products such as phone or tablet electronic products.
• Basic Lean principle and methodologies such as CTQ, PDCA, 8D Problem Solving, Kaizen, Mistake proofing, DMAIC, FMEA, etc…
• Root cause analysis skills and with robust corrective action understanding for problem solving.
• Familiar with critical to quality control, and implement statistical quality process control and risk mitigation plan to ensure quality.
• Able to develop and implement OEM quality process audit checklist for continuous quality improvement.
• Proven track record to understand all aspects of Quality and to be able to lead and influence Operations and Suppliers.
• Familiarity with Hardware failure analysis techniques.
• Fluent in Chinese and English
• Comfortable with frequent business travel

Preferred qualifications: 

• Basic SMT (Surface Mount Technology), PCBA(Print Circuit Board Assembly) background
• Quality qualification would be an advantage

Overview

Join our team as a MEMS Microphone Engineer and lead the charge in developing and optimizing cutting-edge MEMS microphone modules for the future of consumer electronics. Your deep expertise in acoustic engineering and semiconductor manufacturing will be the driving force behind overcoming complex system-level challenges like Microphone Coexistence (Mic-Coex) with wireless radios and ensuring pristine sound quality. Collaborate with cross-functional teams to deliver reliable, high-performing audio solutions with impressive manufacturing yields.

Responsibilities

• Drive the development of custom MEMS microphone modules, covering MEMS transducer, ASIC, and advanced packaging solutions, while balancing acoustic performance, power consumption, and physical footprint.
• Lead the integration of microphone modules into complex systems, focusing on resolving Microphone Coexistence (Mic-Coex) issues involving RF/EMI and signal integrity.
• Implement mechanical and electrical integration using flexible printed circuits (FPC), ensuring robust electrical connectivity and optimal acoustic path designs to maintain high-frequency sensitivity.
• Oversee the Final Assembly, Test, and Pack (FATP) process, establishing critical tolerances and developing acoustic testing methodologies for mass production.
• Define and oversee comprehensive reliability testing programs, including thermal cycling, drop/shock testing, and moisture sensitivity (MSL) evaluations, based on industry standards like JEDEC and MIL-STD.

Minimum Qualifications

• Bachelor's degree in Electrical Engineering, Mechanical Engineering, Acoustics, Physics, Materials Science, or a related field.
• A minimum of 5+ years of direct experience in MEMS microphone module development from concept to high-volume mass production.
• Expertise in acoustic engineering and semiconductor manufacturing, with strong problem-solving skills in system-level challenges such as RF/EMI and signal integrity.
• Proven experience in collaborating with cross-functional teams, external vendors, and contract manufacturers.
• Willingness to travel internationally (up to 25-30%) to support manufacturing ramps and vendor audits.

Preferred Qualifications

• Advanced degree (Master's or Ph.D.) in a relevant field.
• Familiarity with statistical process control (SPC) and data analysis tools like JMP or Minitab for yield analysis and failure mode analysis.
• Experience with structured problem-solving techniques such as 8D and FMEA.

Who you are

We are looking for a Senior Hardware Manufacturing Process Engineer who has great expertise in enabling design and achieving a high level of manufacturing performance and quality and maintaining this level of performance throughout a product’s life. This is someone who has significant experience of working with the R & D team to enable & optimize design and defining manufacturing processes on-site at electronic manufacturing facilities. The ideal candidate is someone who enjoys critical thinking and problem solving, can successfully partner with a wide variety of stakeholders and is willing to dive deep.

This role will be based in Shenzhen. A significant amount of this person’s time will be spent on-site at partner contract manufacturing facilities.  

What you’ll do

You will lead the development, validation, optimization, and documentation of production processes across both final assembly (FATP) and key components manufacturing.

• Led hardware assembly processes development, including but not limited to PSA activation, adhesive dispensing, heat staking, screwing, ultrasonic/laser welding, and the design of semi-auto and fully automated assembly lines.
• Extensive experience in the FATP process, with deep expertise in assembly technical requirements, tolerance analysis, and critical quality control points for electronic components (PCBA, modules, and mechanical parts).
• Led Process DFM initiatives, providing critical feedback to R&D/Engineering during the concept phase to ensure design and manufacturing feasibility and cost effectiveness.
• Perform deep-dive failure analysis on manufacturing-related issues. Utilize PFMEA to mitigate risks before mass production.
• Drive process innovation and develop MP-intent equipment. 
• Implement continuous improvement strategies using Six Sigma or Lean methodologies to maximize yields and reduce manufacturing costs.
• Travel to vendor sites to lead NPI builds. Use statistical tools (such as JMP or Minitab) to analyze DoE (Design of Experiments) data and validate process stability (Cpk/PPK).
• Partner with Hardware Engineering, GSM, and Quality teams to identify, audit, and select contract manufacturers capable of meeting technical requirements.

Minimum requirements

• 15+ years’ experience in manufacturing engineering, possessing knowledge of design for manufacturing, assembly process engineering 
• Strong track record of implementing manufacturing improvements through DFM and DFx principles.
• Knowledge of GD&T principles and use, ability to analyze and understand part tolerance and tolerance stack up and their impact on assembly and component production.
• Experience leading design and implementing manufacturing jigs/fixtures and process flows.
• Possessing the interpersonal skills and experience needed to work with CM teams and management in a collaborative way to meet development schedules and mass-production deliveries.
• Working knowledge on quality management tools (e.g., six sigma, lean production, etc.)  and ability to interpret quality reports.
• Fluency in Chinese and English.

Preferred qualifications

• Mechanical design experience is strong plus
• Experience working in consumer electronics.
• Experience with POS hardware development and manufacturing including knowledge of tamper-proofing systems, and components for POS devices. 

Purpose of Position

• CASETiFY is one of the leading global lifestyle brands to offer customizable tech accessories. We're industry leaders when it comes to trend forecasting and protecting what matters most; the community platform for creativity and self-expression. We’ve reached 1 in 7 millennials and are expanding our team in order to deliver the best-in-market engagement and products for our growing community. 
• The roles will be stationed in overseas production sites and be responsible for managing the production site, maximizing production output & efficiency as well as taking part in improvement projects.

Job Description

• Organize and supervise the site operations to achieve company’s business objectives.
• Monitor processes of production (printing), assembly, picking and packing. Ensure operational efficiency.
• Solve or report any practical and order problems in production. 
• Monitor performance of the outsourced service provider.                                                    
• Implement the SOPs and make suggestions when necessary.
• Perform staff training, team supporting and coaching.
• As a first point of contact for logistics issue.
• As a contact point between HK logistics team and CN logistics service providers.

Requirement

• Tertiary Education/Bachelor Degree in Business Management, Supply Chain Management, Operations Management, Industrial Engineering or other related discipline.
• 5+ years of working experience in production management/operations management.
• Team working.
• Good analytical and problem solving skills, good communication skill, fast-paced learner.

Do you want to change how the world creates?

At Formlabs, we’re building the tools that make it possible for anyone to bring their ideas to life, from cutting-edge products to life-saving medical devices. Our 3D printing technology powers innovation at more than 50,000 industry leaders worldwide, including Apple, Google, Tesla, New Balance, and NASA. Together, we’re helping everyone design, prototype, and manufacture faster than ever before.

We’re a team of hands-on builders, engineers, and innovators reinventing how the world makes physical things. If you’re ready to shape the future of fabrication, come build it with us.

The Job:

1.  Prototype Design and Testing:** Responsible for prototyping new mechanical structures, testing material properties, and investigating various challenges in 3D printing technology.
2.  System Analysis and Iteration:** Analyze, test, validate, and iterate electromechanical systems to ensure a smooth transition of designs from the prototyping phase to mass production.
3.  Manufacturing Process Knowledge:** Possess knowledge of manufacturing processes such as machining fixtures/jigs, fixture design, injection molding, and die casting. Capable of designing parts that optimize cost while enhancing performance.
4.  Critical Thinking: Exhibit a high degree of critical thinking ability to find problem-solving methods, logically analyze issues, interpret results, and draw correct conclusions or define actionable items.
5.  Proactive Initiative: Demonstrate a strong action-oriented mindset, self-motivation, and a willingness to take initiative. Continuously learn and stay updated on industry trends beyond work duties, such as through reading materials or personal project practice.

You:

1.  Experience in team management.
2.  Proficiency in CAD software and experience with online design tools similar to Onshape or SolidWorks PDM.
3.  Proficiency in modeling methods where the entire 3D model is driven by and automatically updated based on master sketch parameters.
4.  Expertise in creating engineering drawings with adherence to standards for geometric dimensions and tolerances (GD&T).
5.  Strong capability in creating detailed and precise process assembly drawings.
6.  Proficiency in spoken English.

Bonus Skills:

• Passion for 3D printing and emerging technologies
• Experience in rapidly-growing startup environments

We Offer:

• An inclusive, dog-friendly office with diverse and inspiring colleagues
• Shares in the company (we’re a Unicorn company)
• Development opportunities both in-house and off-site
• Unlimited 3D prints
• Fun team events

Perks are subject to adjustments and may vary from team to team.

We build amazing things.  Come join us!

We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Even if you don't check every box, but see yourself contributing, please apply. Help us build an inclusive community that will change the face of 3D printing.

Who you are

We are looking for a Head of Hardware Operations. This person is a senior leader who has extensive experience leading their team in the new product development, manufacturing ramp and sustained production of high volume products.  They possess the meticulous attention to detail that is needed to plan production and material readiness to ensure on-time delivery to aggressive forecasts. They have experience managing both the execution of and relationship with large contract manufacturing partners and components suppliers. This person will ensure that the cost of our products meet targets and drive even lower than that. The Supply Chain Lead will ultimately ensure that our supply chain excels in delivery of supply, flexibility and cost while doing so in a way that meets our quality bar. 

A significant amount of this person’s time will be spent on-site at partner contract manufacturing facilities across the APAC region. 

In this role you will lead your team in in the following areas:

• Defining and driving the overall Supply Chain strategy from supplier risk management to component inventory planning to manufacturing planning.  Specific areas of focus include:
  • Ensuring supply of our products to forecast through effective management of our supply chain and our contract manufacturer partners, particularly through implementation of best practice tools such as factory capacity models, factory input/output production plans and material clear to build files.
  • Effectively managing end of life materials in a way that ensures product supply at a minimal risk to product quality. Ensure that the team has last-time buy opportunities and that the cross-functional engineering team is informed in sufficient time to implement alternate components.    
• Being a critical loop in our forecasting process. Ensure that the extended hardware team has understanding of lead times so proper expectations can be set regarding the ability to meet forecast upsides. Influence forecast adjustments as needed during NPI and sustained production based on our supply chains ability to deliver.
• Implementing tactics and strategies that allow for forecast flexibility, particularly upside. 
• Driving the lowest possible unit cost and NRE for our devices and programs through effective sourcing strategies, influence in the design of products and ultimately negotiation with our suppliers.
• Negotiating master supply and development contracts with our CM and supplier partners and the associated statements of work. These agreements will include things such as pricing, NRE costs, liability and material buffering.
• Being a strong partner to our quality teams to ensure our products meet quality targets. Drive manufacturing and supplier partners to implement all needed quality systems and resources.
• Communication with and managing the cross functional team to meet dates needed to ensure that we can ramp new programs to schedule so we can meet our supply commitments to the business. This includes driving the engineering and program management teams to meet design build exit dates and the quality team to complete reliability testing per schedule.
• Managing our corporate responsibility and environmental safety approach with suppliers. 
• In addition to leading the Supply Chain Management team, this role will also be responsible for leading the NPI Operations, Manufacturing Test Engineering (MTE), and Manufacturing Process Engineering (MPE) teams.  

Minimum requirements

• 15+ years experience leading teams in the new product ramp and sustained production of products in high volume manufacturing in the consumer electronics or adjacent space.
• Knowledge of and proven implementation of best tools to manage manufacturing output including factory line balancing and capacity models, production input/output reports and material clear to build (CTB) files.
• Experience working with and strong knowledge of final assembly and test, pack-out, and SMT production processes. 
• Strong knowledge of component manufacturing processes such as injection molding, battery pack, PCB fabrication and display assembly.
• The interpersonal skills and experience needed to work with CM teams and management in a collaborative way to meet development schedules and mass-production deliveries.
• A proven track record of driving lowest product cost and product cost reductions through using comprehensive knowledge of manufacturing processes and component roadmaps to conduct effective negotiations. 
• Experience in negotiating contracts with contract manufacturers and vendors for supply and development activities. 
• Deep experience in new product development and introduction. A strong understanding of what is required of each phase of development (EVT, DVT, etc.) and when key forward looking decisions need to be made - i.e. components risks buys and factory equipment purchases.  
• A working understanding of manufacturing test and manufacturing process engineering. Having the ability to establish a rapport with engineering teams to ensure that design for manufacturability is incorporated into designs. 
• Fluency in Chinese and English

Preferred qualifications

• Experience working in consumer electronics.
• Experience building and leading growing teams.
• Experience working in multinational companies
• Experience with POS hardware development and manufacturing including knowledge of tamper-proofing systems, and components for POS devices. 
• Familiarity with payments hardware related technologies.