About Us

We’re a combat-tested group of engineers, operators, and entrepreneurs who believe America’s edge depends on autonomous airpower that’s trusted and deployable today not in 2040. Backed by tier-one investors, we’ve secured the runway - financial, regulatory, and literal - to move at startup speed while tackling a national-security mission that matters. We’ve structured the company for radical ownership: no silos, no “systems integrator” overhead, just tightly knit mission-focused IPTs that live and breathe the hardware and code they ship.

If you thrive where hard-tech ambition meets national-security urgency, you’ll build faster here than anywhere else. Let’s get after it.

Culture That Ships

• Strong Core Values, Startup Execution. Integrity, Service Before Self, Excellence, Honor, Courage, Commitment—powered by a bias for action and a “figure it out” mindset.
• Self-Starters Only. You’ll have clear objectives, a blank sheet of paper, and the trust (plus capital) to move fast. Bureaucracy stays out of your way.
• One Team, No Tourists. Whether you’re tuning a control law at 2 a.m. or heat-treating a Ti-6Al-4V spar, everyone sweats the details. We celebrate wins together and own failures together.

What You'll Do

• Own the Propulsion Architecture
  • Lead engine selection and sizing trades
  • Define propulsion system architecture including nacelle, mounts, fuel, controls, and thermal integration
  • Tie propulsion performance to mission modeling and aircraft-level requirements
• Drive Aircraft-Level Integration
  • Lead engine-to-airframe integration across structures, aerodynamics, avionics, and autonomy
  • Define propulsion interfaces and manage integration risks
  • Partner cross-functionally to retire vibration, thermal, and installation risks early
• Lead OEM & Supplier Engagement
  • Serve as primary technical interface with engine OEMs
  • Evaluate performance guarantees, integration constraints, and certification pedigree
  • Ensure long-lead propulsion risks are proactively managed
• Enable Certification & Airworthiness
  • Support FAA and/or military airworthiness compliance strategy
  • Contribute to propulsion-related hazard analyses and safety documentation
  • Help shape the path from experimental testing to certified operations
• Support Test & Validation
  • Define propulsion ground and flight test instrumentation strategies
  • Correlate models with test data
  • Own performance validation against mission requirements

What You’ll Bring

• Deep Propulsion Expertise
  • 10+ years of experience in aircraft propulsion or propulsion integration
  • Experience integrating turboprop and/or small turbofan engines
  • Strong understanding of engine performance, SFC, installation effects, and mission sizing
• Aircraft-Level Systems Thinking
  • Experience leading propulsion integration on a clean-sheet or major derivative program
  • Working knowledge of structural loads, vibration, thermal management, and FADEC integration
  • Comfort operating at aircraft architecture level, not just component level
• Technical Leadership
  • Experience interfacing directly with engine OEMs or Tier 1 suppliers
  • Ability to lead trade studies and defend architecture decisions at design reviews
  • Strong written and verbal technical communication skills
  • Analytical Rigor
  • Proficiency in MATLAB, Python, or similar tools
  • Experience correlating analytical models with ground or flight test data

Bonus Points

• FAA Part 23 or Part 25 propulsion certification experience
• Military airworthiness or DoD program experience
• Experience with MBSE tools (e.g., Cameo)
• Experience integrating propulsion with autonomy or unmanned systems
• Flight test support experience

Why You’ll Love Working Here (Compensation and Benefits)

Base Salary: $165,000 to 245,000 USD

The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Atropos's total compensation package. Additionally, Atropos offers top-tier benefits for full-time employees, including:

• Platinum Healthcare Benefits: Atropos offers comprehensive medical, dental, and vision plans with 100% employer-paid premiums and little to no cost to you
• Basic Life/AD&D and long-term disability insurance 100% covered by Atropos, plus the option to purchase additional life insurance for you and your dependents
• Unlimited PTO, with minimum of 15 days enforced
• 20 weeks of paid Caregiver & Wellness Leave to care for a family member, bond with your baby, or tend to your own medical condition
• Family Planning & Parenting Support: Fertility (eg, IVF, preservation), adoption, and gestational carrier coverage with additional benefits and resources to provide support from planning to parenting
• Mental Health Resources: We provide free mental health resources 24/7 including therapy, life coaching, and more. Additional work-life services, such as free legal and financial support, available to you as well
• Tuition and professional development reimbursement for STEM, MBA, and licenses
• In-Office Daily Lunch catered 
• Company-funded child care stipend 
• Company-funded commuter benefits available based on your region.
• Relocation assistance (depending on role eligibility).
• 401(k) retirement savings plan - both a traditional and Roth 401(k). 6% employer matching contribution

The recruiter assigned to this role can share more information about the specific compensation and benefit details associated with this role during the hiring process.

Atropos is an equal-opportunity employer committed to creating a diverse and inclusive workplace. The Atropos team is made up of incredibly talented and unique individuals. All qualified applicants will be treated with respect and receive equal consideration for employment without regard to race, color, creed, religion, sex, gender identity, sexual orientation, national origin, disability, uniform service, Veteran status, age, or any other protected characteristic per federal, state, or local law, including those with a criminal history, in a manner consistent with the requirements of applicable state and local laws. We actively encourage members of recognized minorities, women, Veterans, and those with disabilities to apply, and we work to create a welcoming and supportive environment for all applicants throughout the interview process. If you are someone who is interested in disrupting the way the Department of Defense buys and operates unmanned weapon systems, please apply!

What The Role Is

Reporting to the Manager of Project Engineering, the Project Engineer is responsible for managing the review, coordination, and approval of the detailed design package for Clearway Energy Group’s pipeline of solar and energy storage projects throughout the U.S. As part of the Engineering & Strategic Procurement department, the Project Engineer will also work with internal and external personnel to provide optimized designs, participate in the negotiation and execution of key contract exhibits, and support construction and commissioning activities by reviewing and approving commissioning test reports. The Project Engineer will work closely with Clearway Energy’s internal departments, including Origination, Development, Development Engineering, Construction, Procurement, Project Finance, and O&M; as well as with EPC contractors, Independent Engineers, financing parties, and other consultants, contractors, and stakeholders as needed.

This is a hybrid role based in one of our office locations in San Francisco, San Diego, Scottsdale, Houston, or Denver.

If you don’t meet 100% of the qualifications but see yourself contributing, please submit your resume.

What You'll Be Doing

• Technical lead and primary design and engineering point of contact for the Development and Construction teams, supporting intermediate- to advanced-stage development of utility-scale PV, PV+Storage, and stand-alone energy storage projects.
• Manage all resources, internally or externally, as necessary to obtain or review final site due diligence required to finalize scope, project costs, schedule, energy output, and risks with an independent EPC contractor or developer.
• Review engineering deliverables to ensure the final design meets contractual, cost, and performance requirements for our customers and financing partners.
• Develop, refine, or evaluate energy input assessments and power output expectations. Perform or oversee analyses to optimize site layouts, engineering design, and equipment selection to maximize performance and minimize lifecycle costs.
• Direct activities of designers, consultants, and contractors, and manage meetings and conference calls to achieve efficient use of resources, meet deadlines for deliverables, minimize delays, avoid crises, and resolve conflicts.
• Write, edit, and/or review technical scope of work documents, specifications, procedures, site reports, progress reports, feasibility studies, proposals, presentations, etc. Review and negotiate technical aspects of EPC contracts, interconnect agreements, etc.
• Coordinate with the Development team and external consultants to deliver energy resource predictions and production simulations, shading studies, electrical schematics, plant plans and equipment layouts, system cost estimates, EPC contracts, technical exhibits, etc.
• Review, manage, and maintain contractor deliverables during construction to meet critical contractual and financing milestones, including site, civil, structural, and electrical plans, permitting, and construction documents.
• Support construction as a technical escalation point and owner’s representative to mitigate delays and scope creep to maintain schedules and budgets.
• Represent Clearway (CEG) in interviews, meetings, and negotiations with clients, project developers, suppliers, consultants, utilities, and regulatory authorities.

What You'll Bring

• B.S. degree in mechanical, electrical, or civil engineering, or related subject.
• M.S. degree and/or P.E. desirable.
• Minimum 2+ years of solar/BESS industry experience, including 1+ year of direct EPC experience completing the detailed design, permitting, and construction of solar projects, and 1+ year of storage experience.
• Understanding solar and storage project design, optimization trade-offs, and familiarity with the current solar and storage market, equipment suppliers, contractors, typical technical specifications, and costs.
• Experience with solar and storage project financing and independent engineer requirements.
• Understanding of solar and storage energy estimates, losses, assumptions, and standards.
• Experience with review and negotiation of engineering, procurement, and construction contracts and technical exhibits for solar and storage facilities.
• Experience managing consultants and contractors.
• Working knowledge of relevant U.S. and IEC equipment standards, codes, and construction practices.
• Detail-oriented and self-motivated with the ability to perform in a dynamic and collaborative working environment.
• Ability and willingness to travel (~20%) and occasionally to work after hours on short notice, when necessary.
• Proven ability to organize and prioritize work, manage relationships with clients, colleagues, consultants, and contractors.
• Excellent written and verbal communication, mathematical abilities, analytical and creative design skills, and problem-solving skills; team-oriented with the ability to work alone when needed.

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Hybrid

What The Role Is

Reporting to the Manager of Project Engineering, the Project Engineer is responsible for managing the review, coordination, and approval of the detailed design package for Clearway Energy Group’s pipeline of solar and energy storage projects throughout the U.S. As part of the Engineering & Strategic Procurement department, the Project Engineer will also work with internal and external personnel to provide optimized designs, participate in the negotiation and execution of key contract exhibits, and support construction and commissioning activities by reviewing and approving commissioning test reports. The Project Engineer will work closely with Clearway Energy’s internal departments, including Origination, Development, Development Engineering, Construction, Procurement, Project Finance, and O&M; as well as with EPC contractors, Independent Engineers, financing parties, and other consultants, contractors, and stakeholders as needed.

This is a hybrid role based in one of our office locations in San Francisco, San Diego, Scottsdale, Houston, or Denver.

If you don’t meet 100% of the qualifications but see yourself contributing, please submit your resume.

What You'll Be Doing

• Technical lead and primary design and engineering point of contact for the Development and Construction teams, supporting intermediate- to advanced-stage development of utility-scale PV, PV+Storage, and stand-alone energy storage projects.
• Manage all resources, internally or externally, as necessary to obtain or review final site due diligence required to finalize scope, project costs, schedule, energy output, and risks with an independent EPC contractor or developer.
• Review engineering deliverables to ensure the final design meets contractual, cost, and performance requirements for our customers and financing partners.
• Develop, refine, or evaluate energy input assessments and power output expectations. Perform or oversee analyses to optimize site layouts, engineering design, and equipment selection to maximize performance and minimize lifecycle costs.
• Direct activities of designers, consultants, and contractors, and manage meetings and conference calls to achieve efficient use of resources, meet deadlines for deliverables, minimize delays, avoid crises, and resolve conflicts.
• Write, edit, and/or review technical scope of work documents, specifications, procedures, site reports, progress reports, feasibility studies, proposals, presentations, etc. Review and negotiate technical aspects of EPC contracts, interconnect agreements, etc.
• Coordinate with the Development team and external consultants to deliver energy resource predictions and production simulations, shading studies, electrical schematics, plant plans and equipment layouts, system cost estimates, EPC contracts, technical exhibits, etc.
• Review, manage, and maintain contractor deliverables during construction to meet critical contractual and financing milestones, including site, civil, structural, and electrical plans, permitting, and construction documents.
• Support construction as a technical escalation point and owner’s representative to mitigate delays and scope creep to maintain schedules and budgets.
• Represent Clearway (CEG) in interviews, meetings, and negotiations with clients, project developers, suppliers, consultants, utilities, and regulatory authorities.

What You'll Bring

• B.S. degree in mechanical, electrical, or civil engineering, or related subject.
• M.S. degree and/or P.E. desirable.
• Minimum 2+ years of solar/BESS industry experience, including 1+ year of direct EPC experience completing the detailed design, permitting, and construction of solar projects, and 1+ year of storage experience.
• Understanding solar and storage project design, optimization trade-offs, and familiarity with the current solar and storage market, equipment suppliers, contractors, typical technical specifications, and costs.
• Experience with solar and storage project financing and independent engineer requirements.
• Understanding of solar and storage energy estimates, losses, assumptions, and standards.
• Experience with review and negotiation of engineering, procurement, and construction contracts and technical exhibits for solar and storage facilities.
• Experience managing consultants and contractors.
• Working knowledge of relevant U.S. and IEC equipment standards, codes, and construction practices.
• Detail-oriented and self-motivated with the ability to perform in a dynamic and collaborative working environment.
• Ability and willingness to travel (~20%) and occasionally to work after hours on short notice, when necessary.
• Proven ability to organize and prioritize work, manage relationships with clients, colleagues, consultants, and contractors.
• Excellent written and verbal communication, mathematical abilities, analytical and creative design skills, and problem-solving skills; team-oriented with the ability to work alone when needed.

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Hybrid

What The Role Is

Reporting to the Manager of Project Engineering, the Project Engineer is responsible for managing the review, coordination, and approval of the detailed design package for Clearway Energy Group’s pipeline of solar and energy storage projects throughout the U.S. As part of the Engineering & Strategic Procurement department, the Project Engineer will also work with internal and external personnel to provide optimized designs, participate in the negotiation and execution of key contract exhibits, and support construction and commissioning activities by reviewing and approving commissioning test reports. The Project Engineer will work closely with Clearway Energy’s internal departments, including Origination, Development, Development Engineering, Construction, Procurement, Project Finance, and O&M; as well as with EPC contractors, Independent Engineers, financing parties, and other consultants, contractors, and stakeholders as needed.

This is a hybrid role based in one of our office locations in San Francisco, San Diego, Scottsdale, Houston, or Denver.

If you don’t meet 100% of the qualifications but see yourself contributing, please submit your resume.

What You'll Be Doing

• Technical lead and primary design and engineering point of contact for the Development and Construction teams, supporting intermediate- to advanced-stage development of utility-scale PV, PV+Storage, and stand-alone energy storage projects.
• Manage all resources, internally or externally, as necessary to obtain or review final site due diligence required to finalize scope, project costs, schedule, energy output, and risks with an independent EPC contractor or developer.
• Review engineering deliverables to ensure the final design meets contractual, cost, and performance requirements for our customers and financing partners.
• Develop, refine, or evaluate energy input assessments and power output expectations. Perform or oversee analyses to optimize site layouts, engineering design, and equipment selection to maximize performance and minimize lifecycle costs.
• Direct activities of designers, consultants, and contractors, and manage meetings and conference calls to achieve efficient use of resources, meet deadlines for deliverables, minimize delays, avoid crises, and resolve conflicts.
• Write, edit, and/or review technical scope of work documents, specifications, procedures, site reports, progress reports, feasibility studies, proposals, presentations, etc. Review and negotiate technical aspects of EPC contracts, interconnect agreements, etc.
• Coordinate with the Development team and external consultants to deliver energy resource predictions and production simulations, shading studies, electrical schematics, plant plans and equipment layouts, system cost estimates, EPC contracts, technical exhibits, etc.
• Review, manage, and maintain contractor deliverables during construction to meet critical contractual and financing milestones, including site, civil, structural, and electrical plans, permitting, and construction documents.
• Support construction as a technical escalation point and owner’s representative to mitigate delays and scope creep to maintain schedules and budgets.
• Represent Clearway (CEG) in interviews, meetings, and negotiations with clients, project developers, suppliers, consultants, utilities, and regulatory authorities.

What You'll Bring

• B.S. degree in mechanical, electrical, or civil engineering, or related subject.
• M.S. degree and/or P.E. desirable.
• Minimum 2+ years of solar/BESS industry experience, including 1+ year of direct EPC experience completing the detailed design, permitting, and construction of solar projects, and 1+ year of storage experience.
• Understanding solar and storage project design, optimization trade-offs, and familiarity with the current solar and storage market, equipment suppliers, contractors, typical technical specifications, and costs.
• Experience with solar and storage project financing and independent engineer requirements.
• Understanding of solar and storage energy estimates, losses, assumptions, and standards.
• Experience with review and negotiation of engineering, procurement, and construction contracts and technical exhibits for solar and storage facilities.
• Experience managing consultants and contractors.
• Working knowledge of relevant U.S. and IEC equipment standards, codes, and construction practices.
• Detail-oriented and self-motivated with the ability to perform in a dynamic and collaborative working environment.
• Ability and willingness to travel (~20%) and occasionally to work after hours on short notice, when necessary.
• Proven ability to organize and prioritize work, manage relationships with clients, colleagues, consultants, and contractors.
• Excellent written and verbal communication, mathematical abilities, analytical and creative design skills, and problem-solving skills; team-oriented with the ability to work alone when needed.

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Hybrid

What The Role Is

Reporting to the Manager of Project Engineering, the Project Engineer is responsible for managing the review, coordination, and approval of the detailed design package for Clearway Energy Group’s pipeline of solar and energy storage projects throughout the U.S. As part of the Engineering & Strategic Procurement department, the Project Engineer will also work with internal and external personnel to provide optimized designs, participate in the negotiation and execution of key contract exhibits, and support construction and commissioning activities by reviewing and approving commissioning test reports. The Project Engineer will work closely with Clearway Energy’s internal departments, including Origination, Development, Development Engineering, Construction, Procurement, Project Finance, and O&M; as well as with EPC contractors, Independent Engineers, financing parties, and other consultants, contractors, and stakeholders as needed.

This is a hybrid role based in one of our office locations in San Francisco, San Diego, Scottsdale, Houston, or Denver.

If you don’t meet 100% of the qualifications but see yourself contributing, please submit your resume.

What You'll Be Doing

• Technical lead and primary design and engineering point of contact for the Development and Construction teams, supporting intermediate- to advanced-stage development of utility-scale PV, PV+Storage, and stand-alone energy storage projects.
• Manage all resources, internally or externally, as necessary to obtain or review final site due diligence required to finalize scope, project costs, schedule, energy output, and risks with an independent EPC contractor or developer.
• Review engineering deliverables to ensure the final design meets contractual, cost, and performance requirements for our customers and financing partners.
• Develop, refine, or evaluate energy input assessments and power output expectations. Perform or oversee analyses to optimize site layouts, engineering design, and equipment selection to maximize performance and minimize lifecycle costs.
• Direct activities of designers, consultants, and contractors, and manage meetings and conference calls to achieve efficient use of resources, meet deadlines for deliverables, minimize delays, avoid crises, and resolve conflicts.
• Write, edit, and/or review technical scope of work documents, specifications, procedures, site reports, progress reports, feasibility studies, proposals, presentations, etc. Review and negotiate technical aspects of EPC contracts, interconnect agreements, etc.
• Coordinate with the Development team and external consultants to deliver energy resource predictions and production simulations, shading studies, electrical schematics, plant plans and equipment layouts, system cost estimates, EPC contracts, technical exhibits, etc.
• Review, manage, and maintain contractor deliverables during construction to meet critical contractual and financing milestones, including site, civil, structural, and electrical plans, permitting, and construction documents.
• Support construction as a technical escalation point and owner’s representative to mitigate delays and scope creep to maintain schedules and budgets.
• Represent Clearway (CEG) in interviews, meetings, and negotiations with clients, project developers, suppliers, consultants, utilities, and regulatory authorities.

What You'll Bring

• B.S. degree in mechanical, electrical, or civil engineering, or related subject.
• M.S. degree and/or P.E. desirable.
• Minimum 2+ years of solar/BESS industry experience, including 1+ year of direct EPC experience completing the detailed design, permitting, and construction of solar projects, and 1+ year of storage experience.
• Understanding solar and storage project design, optimization trade-offs, and familiarity with the current solar and storage market, equipment suppliers, contractors, typical technical specifications, and costs.
• Experience with solar and storage project financing and independent engineer requirements.
• Understanding of solar and storage energy estimates, losses, assumptions, and standards.
• Experience with review and negotiation of engineering, procurement, and construction contracts and technical exhibits for solar and storage facilities.
• Experience managing consultants and contractors.
• Working knowledge of relevant U.S. and IEC equipment standards, codes, and construction practices.
• Detail-oriented and self-motivated with the ability to perform in a dynamic and collaborative working environment.
• Ability and willingness to travel (~20%) and occasionally to work after hours on short notice, when necessary.
• Proven ability to organize and prioritize work, manage relationships with clients, colleagues, consultants, and contractors.
• Excellent written and verbal communication, mathematical abilities, analytical and creative design skills, and problem-solving skills; team-oriented with the ability to work alone when needed.

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Hybrid

What The Role Is

Reporting to the Manager of Project Engineering, the Project Engineer is responsible for managing the review, coordination, and approval of the detailed design package for Clearway Energy Group’s pipeline of solar and energy storage projects throughout the U.S. As part of the Engineering & Strategic Procurement department, the Project Engineer will also work with internal and external personnel to provide optimized designs, participate in the negotiation and execution of key contract exhibits, and support construction and commissioning activities by reviewing and approving commissioning test reports. The Project Engineer will work closely with Clearway Energy’s internal departments, including Origination, Development, Development Engineering, Construction, Procurement, Project Finance, and O&M; as well as with EPC contractors, Independent Engineers, financing parties, and other consultants, contractors, and stakeholders as needed.

This is a hybrid role based in one of our office locations in San Francisco, San Diego, Scottsdale, Houston, or Denver.

If you don’t meet 100% of the qualifications but see yourself contributing, please submit your resume.

What You'll Be Doing

• Technical lead and primary design and engineering point of contact for the Development and Construction teams, supporting intermediate- to advanced-stage development of utility-scale PV, PV+Storage, and stand-alone energy storage projects.
• Manage all resources, internally or externally, as necessary to obtain or review final site due diligence required to finalize scope, project costs, schedule, energy output, and risks with an independent EPC contractor or developer.
• Review engineering deliverables to ensure the final design meets contractual, cost, and performance requirements for our customers and financing partners.
• Develop, refine, or evaluate energy input assessments and power output expectations. Perform or oversee analyses to optimize site layouts, engineering design, and equipment selection to maximize performance and minimize lifecycle costs.
• Direct activities of designers, consultants, and contractors, and manage meetings and conference calls to achieve efficient use of resources, meet deadlines for deliverables, minimize delays, avoid crises, and resolve conflicts.
• Write, edit, and/or review technical scope of work documents, specifications, procedures, site reports, progress reports, feasibility studies, proposals, presentations, etc. Review and negotiate technical aspects of EPC contracts, interconnect agreements, etc.
• Coordinate with the Development team and external consultants to deliver energy resource predictions and production simulations, shading studies, electrical schematics, plant plans and equipment layouts, system cost estimates, EPC contracts, technical exhibits, etc.
• Review, manage, and maintain contractor deliverables during construction to meet critical contractual and financing milestones, including site, civil, structural, and electrical plans, permitting, and construction documents.
• Support construction as a technical escalation point and owner’s representative to mitigate delays and scope creep to maintain schedules and budgets.
• Represent Clearway (CEG) in interviews, meetings, and negotiations with clients, project developers, suppliers, consultants, utilities, and regulatory authorities.

What You'll Bring

• B.S. degree in mechanical, electrical, or civil engineering, or related subject.
• M.S. degree and/or P.E. desirable.
• Minimum 2+ years of solar/BESS industry experience, including 1+ year of direct EPC experience completing the detailed design, permitting, and construction of solar projects, and 1+ year of storage experience.
• Understanding solar and storage project design, optimization trade-offs, and familiarity with the current solar and storage market, equipment suppliers, contractors, typical technical specifications, and costs.
• Experience with solar and storage project financing and independent engineer requirements.
• Understanding of solar and storage energy estimates, losses, assumptions, and standards.
• Experience with review and negotiation of engineering, procurement, and construction contracts and technical exhibits for solar and storage facilities.
• Experience managing consultants and contractors.
• Working knowledge of relevant U.S. and IEC equipment standards, codes, and construction practices.
• Detail-oriented and self-motivated with the ability to perform in a dynamic and collaborative working environment.
• Ability and willingness to travel (~20%) and occasionally to work after hours on short notice, when necessary.
• Proven ability to organize and prioritize work, manage relationships with clients, colleagues, consultants, and contractors.
• Excellent written and verbal communication, mathematical abilities, analytical and creative design skills, and problem-solving skills; team-oriented with the ability to work alone when needed.

Clearway will not sponsor non-immigrant visas for this position (H-1B, TN, E-3, etc.).

#LI-Hybrid

About Us

ŌURA is seeking a skilled and detail-oriented FEA (Finite Element Analysis) Engineer to join our product design engineering team. You will be responsible for performing structural and dynamic simulations to optimize the design and performance of our wearable devices. Your work will directly impact the reliability, durability, and user comfort of our products.

What You'll Do:

• FEA Modeling: Develop and validate FEA models of components and assemblies using appropriate software (e.g., ANSYS, Abaqus).
• Structural Analysis: Perform linear and non-linear static and dynamic analyses to evaluate stress, strain, and deformation under various loading conditions
• Drop Test Simulation: Simulate drop test scenarios to evaluate product robustness and identify potential failure points.
• Optimization: Use FEA results to guide design optimization and improve product performance, reliability, and weight.
• Correlation: Help drive correlation of FEA results with physical test data to validate models and improve accuracy.
• Documentation: Prepare clear and concise reports summarizing FEA results and recommendations.
• Collaboration: Work closely with product design engineers, mechanical engineers, and materials engineers.
• Software Development: Develop and maintain scripts and workflows to automate FEA processes.

We would love to consider you for this role if you have:

• 7+ years of experience as an FEA Engineer, preferably in consumer electronics, wearable devices, or a related industry.
• Proficiency in using FEA software such as ANSYS, Abaqus, or similar.
• Strong understanding of solid mechanics principles, including stress, strain, elasticity, and plasticity.
• Experience with linear and non-linear static and dynamic analysis.
• Experience with model validation and correlation with test data.
• Excellent problem-solving and analytical skills.
• Strong communication and presentation skills.
• Ability to work independently 

Nice to have:

• Experience with FEA simulation of wearable devices or small, complex electronic products.
• Experience with transient thermal analyses to optimize thermal performance and manage heat dissipation.
• Deep knowledge of material properties and failure criteria.
• Experience with optimization techniques.
• Familiarity with scripting languages such as Python.
• Experience with high-performance computing (HPC).

Benefits 

At Oura, we care about you and your well-being. Everyone here at Oura has a ring of their own and we are continually looking to improve employee health and add to our benefits!

What we offer:

• Competitive salary and equity packages
• Health, dental, vision insurance, and mental health resources
• An Oura Ring of your own plus employee discounts for friends & family
• 20 days of paid time off plus 13 paid holidays plus 8 days of flexible wellness time off
• Paid sick leave and parental leave
• Amazing culture of collaborative and passionate coworkers

Oura takes a market-based approach to pay, which may vary depending on your location. US locations are categorized into tiers based on a cost of labor index for that geographic area. While most offers will be closer to the starting range, successful candidates' pay will be determined based on job-related skills, experience, qualifications, work location, internal peer equity, and market conditions. These ranges may be modified in the future.

• Region 1 Range (SF): $198,000 - $233,000
• Region 2 Range (SD): $180,000 - $212,000

A recruiter can determine your zones/tiers based on your US location.

Watch your work come to life in landmark projects around the world when you partner with Syska Hennessy Group. As a global leader in consulting, engineering, and commissioning services, we specialize in MEP, information and communication technology, architectural lighting, vertical transportation, and commissioning. 

We are seeking a Senior Mechanical Engineer to join our team in San Diego. Your experience working in a consulting firm on healthcare projects will ensure your success in this role. Working from either our Los Angeles or San Diego offices, you will contribute to the design of major projects from both inpatient and outpatient healthcare engineering design across all phases from around the world. You will be part of a large team of over 100 engineers nationally with a wealth of experience, so this is a great opportunity to grow your career.

Our dynamic work environment provides the optimal setting to take your career to the next level. From our supportive culture, diverse workforce, and competitive compensation to our flexible work schedules and fun social events, it’s everything you’ll need for an exciting, challenging, and rewarding career. Mission Critical, Science + Technology, Healthcare, and Project Management experience a plus.

Job Responsibilities

As a Senior Mechanical Engineer you will be responsible for representing the Firm in all interactions with clients, contractors, architects, and other project team members. You will be responsible for designing large projects, preparing reports and specifications, and providing a high level of technical leadership.

Additional responsibilities include:

• Providing consulting services, including preparation of due diligence reports, gap analyses, and feasibility reports
• Develop sustainable mechanical solutions, producing concepts and detailed drawings
• Overseeing the production of drawings consistent with client requirements and standards
• Coordinating with design team, owner, and contractors
• Establishing design standards, specifications, and criteria for projects
• Preparation of proposals and administering project contracts between SHG and the client, including Add Service Agreements
• Conducting business development activities, participating in various trade organizations, and preparing presentations
• Establishing project budgets and schedules
• Participating in QA/QC process of completed work by staff
• Performing staff resource management and review

Job Requirements

Successful candidates must have a current PE registration as a Mechanical Engineer with a solid, and stable work track record. The capability to fully design mechanical systems for various building types not only commercial and mixed-use but also mission critical, life science and R+D facilities would be a major plus and good fit for this dynamic role.

Additional requirements of the Senior Mechanical Engineer include:

• Bachelor’s degree in Mechanical Engineering from an accredited university
• Minimum of 8+years’ experience working in a consulting firm
• 3+ year supervisory, Project manager
• LEED AP accreditation, highly preferred
• Candidate should possess a strong ability to coordinate mechanical systems with architectural, structural, electrical, and telecom, as well as its constructability and cost
• Working knowledge of AutoCAD and REVIT experience
• PE required

Benefits

As an employee with Syska Hennessy Group, you will be part of a global firm with an amazing history! We are committed to being the best, to advancing engineering design practice, and to supporting our clients with integrity. To make all of that happen, we rely on the talent, drive, enthusiasm, and the total job satisfaction of the great people who work here.

As a member of our highly collaborative team, we provide you with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The personal benefits program at Syska Hennessy includes:

• Robust, comprehensive medical, dental, vision, life insurance and supplemental benefit plans
• 401(k) plan with a generous employer matching program
• Training and professional development courses
• Professional development incentive bonuses
• Dynamic Employee Resource Groups
• Competitive Paid Time Off (PTO) policy
• Transit/parking employer stipend
• ½ day work from home Fridays all year long

At Syska, we promote an environment that is committed to embedding diversity and equality into the core of our business and culture. We empower our employees so they can take ownership for their work and development and strive to continually improve themselves and our firm. Syska is a place where you can build an exceptional career and have a lasting impact on the world.

Syska Hennessy Group | Integrating the best minds and technology to help clients create exceptional environments.